Accessoires et Pièces Harley-Davidson Importés par US Dream Import en France Site : http://www.usdream.fr/ Hotline : +33(0)6 60 06 46 59 E-Mail : info@usdream.fr
OUTILLAGE TOOLS INDEX Degree Wheels, Engine Stands & Misc. Engine ................................................ 1437-1438 Bottom End Engine ......................................... 1439-1448 Top End Engine ................................................ 1448-1453 Fuel System ...................................................... 1453-1455 Primary & Clutch ............................................. 1455-1458 Transmission .................................................... 1458-1461 Frame & Chassis ............................................... 1461-1465 Final Drive & Belt ............................................. 1462-1464 Brake ................................................................. 1465-1466 Suspension Service .......................................... 1466-1469 Wheel & Tire Service ....................................... 1469-1477 Electrical & Diagnostic .................................... 1477-1482 Battery & Charging System ............................ 1483-1490 Lifts & Center Jacks ......................................... 1491-1493 Oil & Filter Service ........................................... 1493-1494 General Hand .................................................... 1494-1501 Travel Tools & Tool Kits ................................... 1501-1502 Shop & Work Gloves......................................... 1503-1504 1436
SECTION DEGREE WHEEL
SPACE-N-TIME TOOL KIT •Designed by Delkron for taking the measurements on various engine components •Features a degree wheel and cast-aluminum cutaway timing cover •Eliminates guesswork when it comes to camshaft, crankcase and breather valve end play, timing gear lash, lifter-block alignment and cam timing, to name just a few •Complete instructions included PART # DS-194069
DESCRIPTION Space-N-Time tool kit
SUG. RETAIL $109.95
WINDSHIELDS & FAIRINGS
•Manufactured from .052” thick aluminum with a 6.75” outside dia. and a 6mm center hole •Black anodized finish with easy-to-read numbers •Can be used on all motorcycles to check or set ignition timing, or on 4-stroke engines to check or alter cam timing PART # MP08-092
DESCRIPTION Degree wheel
TOURING AUDIO & COMMUNICATION SUG. RETAIL $15.95
LUGGAGE SEATS & SISSY BARS
SURFACE TEMPERATURE INDICATING STRIPS •Alerts you when metal has reached 210°F, the temp at which you should cease heating mainshaft, flywheel sprocket shaft, motor or transmission case when trying to remove stubborn bearings, races or gears •Sold as 30-pack •Made in the U.S.A. PART # 3850-0200
DESCRIPTION Surface temperature indicating strips
FUEL/AIR SYSTEMS ENGINE
•Plastic degree wheel made exclusively for engines •A must for anyone modifying or repairing engines PART # 8050-1010
DESCRIPTION Degree wheel
SUG. RETAIL $10.95
TRANSMISSION & DRIVELINE
ENGINE AND TRANSMISSION PLUG KIT •Plugs holes on engines and transmissions when rebuilding •Helps seal out dirt, dust and more •Kit includes enough pieces for one Twin Cam engine and transmission •Made in the U.S.A. PART # 3850-0144
DESCRIPTION For 99-13 Twin Cam models
SUG. RETAIL $67.95
ENGINE CLEANING BRUSH KIT
PART # 7805-1038
GASKETS & SEALS ELECTRICAL
LIGHTING
•Contains nine brushes ranging from 1/4” to 5” in diameter •Handle is made from heavy-gauge twisted steel to minimize bending •Stiff nylon bristles will not soften or melt in chemicals DESCRIPTION Brush kit
3801-0027
•Must-have tool for proper and accurate diagnostics of air, vacuum and internal mechanical issues •Uses sound frequency isolation; lets you hear sounds at frequencies you can’t normally hear •91/2” L solid probe used for internal mechanical diagnostics •Black probe used for external air, vacuum and liquid leak diagnostics •Included Soni-Pod used in conjunction with SoundStik to check for leaks in Tour-Pak and saddlebags •Uses included 9V battery •Made in the U.S.A. DESCRIPTION SoundStik audio isolation tool
•Oil changes are now a snap •Several strokes of the pump create a vacuum that neatly captures up to 6 liters (1.57 gal.) in PART #3801-0027 and 15 liters (3.92 gal.) in PART #3801-0151 3801-0151 •Pour spout is included to help empty container •Pump is removable for easy storage •Works great for motorcycles, ATVs, snowmobiles, boats, personal watercraft, cars and more PART # 3801-0027 3801-0151
DESCRIPTION 1.57 gallon 3.9 gallon
SUG .RETAIL $61.95 124.95
CABLES
BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS
SUG. RETAIL $259.95
PICSTIK FOR JIMS VIDEO SCOPE •Easy-to-use storage device directly downloads and saves AVI video and JPEG snapshots from JIMS Video Scope (PART #3850-0122) with a push of a button •Includes all necessary cables and complete instructions •Uses 3 AAA batteries (included) •Made in the U.S.A. DESCRIPTION PicStik for JIMS video scope
HANDLEBARS, CONTROLS & MIRRORS
OIL EXTRACTOR SUG. RETAIL $63.95
SOUNDSTIK AUDIO ISOLATION TOOL
PART # 3850-0142
EXHAUST
SUG. RETAIL $21.95
ENGINE DEGREE WHEEL
PART # 3850-0143
21
SUG. RETAIL $204.95
VIDEO SCOPE •Live remote video allows you to view into most any hole that is 1/4” or larger •Features high resolution auto focus, 2.5” full-color viewing monitor and a video-out jack for viewing on larger screens •Equipped with a sealed, fluid-proof, flexible, 24”-long, 6mm diameter shaft •Video shaft is easily maneuverable down sparkplug holes, intake/ exhaust ports, transmission and engine fill or drainplug holes •High output LED illumination with dimming control •Includes magnet for picking up steel parts weighing less than 1/4 lb. and mirror for 90° viewing PART # 3850-0122
All part numbers in BLUE are new for 2013.
DESCRIPTION VO scope
SUG. RETAIL $398.95
FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL
1437
SECTION
21 3801-0080
WINDSHIELDS & FAIRINGS
3801-0081
TOURING ENGINE STANDS •An economical way to hold an engine on the work bench, for shipping, or for display •Constructed of heavy-gauge stamped steel with S&S logo laser cut in both ends •Blue powder-coat finish for professional appearance suitable for display, and protects stands from corrosion and minor abrasions •Made in the U.S.A.
AUDIO & COMMUNICATION LUGGAGE
3801-0082
PART # 3801-0080 3801-0081
SEATS & SISSY BARS
3801-0082
DESCRIPTION For 84-99 Big Twin engines For 99-13 Twin Cam 88 “A” and S&S T-series engines For 00-06 Twin Cam 88 “B” engines
SUG. RETAIL $66.95 66.95 66.95
EXHAUST DS-196304
FUEL/AIR SYSTEMS
DS-196058 DS-196301
ENGINE 3802-0030
TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL COMPLETE MODULAR ENGINE AND TRANSMISSION STAND KIT
LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES
BRAKES
•Kit provides a solid and versatile work center for most Harley motors •Complete kit and selected components are available individually •Kit includes base, Shovelhead/Evolution cradle, Twin Cam “A” cradle, Twin Cam “B” cradle, XL/Buell cradle, Buell Blast cradle and 5-/6-speed transmission cradle •Base can be rotated 360°; cradles can be rotated and locked at 45°, 90° and 180° •Made in the U.S.A.
MOTOR STANDS •Steel powder-coated construction •Make working on motors easier with better access •Made in the U.S.A.
SUG. PART # DESCRIPTION RETAIL DS-196028 For 99-13 Twin Cam “A” motor $92.95 3801-0181 For 00-13 Twin Cam “B” motor 92.95 DS-196058 For 84-99 Evolution motor 96.95 DS-196086 For 86-03 XL, 94-02 Buell (except Blast) 151.95
TANKS & OIL FILTERS
FRAMES, SUSPENSION & FENDERS
WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL
1438
SUG. RETAIL $1,391.95 149.95 125.95
BALANCER INNER BEARING INSTALLER •Installs inner balancer bearings mounted in left engine case •Can be used on a work bench without using an arbor press •Made in the U.S.A.
DASHES & GAUGES
FOOTRESTS & LICENSE PLATE FRAMES
PART # DESCRIPTION DS-196301 Complete kit INDIVIDUAL COMPONENTS DS-196304 99-06 Twin Cam “A” cradle 3802-0030 Transmission stand tool for 99-13 Twin Cam models
PART # 3801-0145
DESCRIPTION For 00-13 Twin Cam “B” motors
TWIN CAM “B” MOTOR CASE SUPPORT BLOCKS •Protects left engine case while servicing inner balancer bearings •Aluminum blocks have inserted Delrin pads that rest against case to prevent marring and to support the case •Keeps case level when using bearing pullers to remove balancer inner bearings •Made in the U.S.A. PART # 3801-0146
DESCRIPTION For 00-13 Twin Cam “B” motors
BALANCER SHAFT REMOVAL TOOL
SUG. RETAIL
•Removes both the front and rear counter-balancer shaft bearing assembly, from the left engine case •Made in the U.S.A.
$85.95
PART # 3801-0085
DESCRIPTION For 07-13 Twin Cam “B” motors
All part numbers in BLUE are new for 2013.
SUG. RETAIL $190.95
SUG. RETAIL $214.95
SECTION
21
WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION BALANCER SHAFT RETENTION PINS
BALANCER SHAFT BEARING REMOVER •Use to remove motor balancer shaft bearings in one easy, smooth operation •Made in the U.S.A. PART # DS-196405
LUGGAGE
•Use to secure balancers when servicing the flywheel assembly •Lock into balancer shaft sprocket pinholes to prevent balancer from turning out of sync with flywheel •Made in the U.S.A.
DESCRIPTION For 00-06 Twin Cam “B” motors
SUG. RETAIL $128.95
PART # DS-196406
DESCRIPTION For 00-13 Twin Cam “B” motors
SEATS & SISSY BARS SUG. RETAIL $23.95
EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE
HYDRAULIC BALANCER RETAINER TOOL •Holds hydraulic tensioners in place that keep constant chain tension on counter balancer system •Made in the U.S.A.. PART # 3801-0177
DESCRIPTION For 00-13 Twin Cam “B” motors
SUG. RETAIL $29.95
GASKETS & SEALS
•Takes the guesswork out of setting up your balancer shaft sprocket and chain alignment •Made in the U.S.A. PART # 3801-0131
3801-0109
DESCRIPTION For 00-13 Twin Cam “B” motors
ELECTRICAL SUG. RETAIL $262.95
LIGHTING
OUTER BALANCER BEARING REMOVER AND INSTALLER
HANDLEBARS, CONTROLS & MIRRORS
TWIN CAM “B” MOTOR CRANKSHAFT BEARING INSTALLER/ REMOVER
•Complete kit safely removes and installs outer balancer bearing on the chain guide support plate •Also installs the new balancer bearing and counter balancer shaft on Twin Cam 96” or 110” “B” Softail engines •Installer also available separately •Made in the U.S.A. PART # FOR 07-13 FXST/FLST 3801-0109 3801-0087
BALANCER SHAFT SPROCKET ALIGNMENT TOOL
DESCRIPTION
SUG. RETAIL
Complete kit Installer only
$162.95 105.95
CABLES
PART # DS-196316
DESCRIPTION For 00-10 Twin Cam “B” motors (Softails)
•Spreads the crankcase pinion bearing rollers when reassembling right side case to the flywheel assembly •Made in the U.S.A.
•For use on pinion and sprocket side main case bearings on 03-10 Twin Cam “A” •Will also work on sprocket side main case bearing on 03-10 Twin Cam “B” motors •Made in the U.S.A.
PART # DS-198624
PART # 3801-0012
DESCRIPTION For 99-13 Twin Cam, 03-09 Buell XB9R/XB9S
SUG. RETAIL $34.95
DESCRIPTION For 03-10 Twin Cam “A” and “B” motors
All part numbers in BLUE are new for 2013.
TANKS & OIL FILTERS SUG. RETAIL $306.95
DASHES & GAUGES FRAMES, SUSPENSION & FENDERS
CRANKCASE BEARING REMOVER AND INSTALLER
CRANKSHAFT GUIDE TOOL
BRAKES
•Designed to protect engine cases by using a specially-designed support block to remove or install cam side crankshaft bearing •Made in the U.S.A.
FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS SUG. RETAIL $173.95
COVERS, SECURITY & GENERAL
1439
SECTION
21
WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS
TIMKEN® BEARING RACE INSTALLER
TIMKEN® BEARING SIMULATOR
•Used to install bearing race straight into the left crankcase •A must for late-model cases •For removal of bearing races on 69-99 Big Twin models, use tool PART #DS-196046 •Made in the U.S.A. PART # DS-198636
DESCRIPTION For use on 94-02 Big Twin, 86-03 XL and 82-02 Buell
SUG. RETAIL $242.95
•Designed to allow quick and easy removal and replacement of flywheel assembly in the left-side crankcase when checking rod-to-case, piston-to-flywheel or cylinder-to-flywheel clearance •Made of black Delrin® plastic; won’t scratch bearing races •Made in the U.S.A. PART # DS-197080
DESCRIPTION For 84-02 Big Twin
SUG. RETAIL $67.95
ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL
LIGHTING HANDLEBARS, CONTROLS & MIRRORS
SNAP RING INSTALLER AND REMOVER •Used for removing and installing the Timken® bearing outer race snap ring •A must for replacing rings in OE and aftermarket cases •Made in the U.S.A. PART # DS-197064
TIMKEN® CASE BEARING TOOL
DESCRIPTION Snap ring installer and remover for 84-02 Big Twin
SUG. RETAIL $94.95
CABLES
BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL
1440
BIG TWIN CASE LAP TOOL •Used when a new right case race is installed or fitted for oversize rollers •Race must be lapped to true (or sized) and aligned with the left case pinion bushing centerline •Made in the U.S.A. PART # DS-196160
PART # 3801-0084 3801-0108
DESCRIPTION For 84-99 Big Twin, including aftermarket engines (except Twin Cam)
DESCRIPTION For 03-10 Twin Cam engines Repl. sleeve kit
SUG. RETAIL $901.95
CRANK ASSEMBLY REMOVING TOOL
CASE SPLITTER TOOL •”Breaks” the case sealant by pushing apart both case halves •Bolts to primary mounting holes •Uses included hand thread-in pushing screw •Flywheels will be pushed from the left case •Made in the U.S.A. PART # 3801-0062
•This tool is a must for the big-cubic-inch late-model Twin Cam engine builder •It may also be used to replace bearings for stock 88” or 96” engines utilizing the special JIMS precision insert •Easily and accurately converts the left side crankshaft roller bearing (OEM #24604-00D) to the more durable Timken Bearing (OEM #9028) •Sleeve is several times stronger than stock aluminum case material that standard bearings ride in •Included in kit is one new steel bearing insert sleeve (held to under .0002” total indicator reading), all necessary drill bits to drill oil feed and return holes, press plate that holds bearing sleeve insert in line with case bearing bore at time of installation, all necessary hardware and instructions •Requires normal hand tools, hand drill and two-ton press •Timken bearing not included; see PART #179473 •Replacement Timken sleeve kit available separately •Made in the U.S.A.
•Use to press flywheels from cases •Will press cases apart and break sealant bond •Made in the U.S.A.
DESCRIPTION For 06 Dyna models and all 07-13 Twin Cam models
SUG. RETAIL $269.95
PART # DS-196089
DESCRIPTION For 84-99 Big Twin, except Twin Cam
All part numbers in BLUE are new for 2013.
SUG. RETAIL $212.95
SUG. RETAIL $1,074.95 160.95
SECTION 4”-41/8” BIG TWIN CASE BORING JIG AND ADAPTERS
21
WINDSHIELDS & FAIRINGS
•Jig takes the guesswork out of boring Twin Cam cases to accept 4”-41/8” bore cylinders •Jig designed for use in heavy-duty, 15” drill press •Jig angled swivel base simply mounts to drill press; bolt in the case, install the case boring fixture using the cylinder stud holes, set the drill rpm and bore •Order adapter 3801-0103 to allow boring of 06 Dyna and 07-13 Big Twin cam models; for use with discontinued boring jig PART #DS-196410 (JIMS #1177) •Order adapter 3801-0105 to allow boring of 84-99 Evolution Big Twin models; for use with PART #3801-0063 boring jig •Will work with all aftermarket engine cases that utilize stock location of cylinder stud holes and overall case widths •Made in the U.S.A.
TOURING AUDIO & COMMUNICATION
3801-0103 3801-0063
PART # DESCRIPTION BORING JIG 3801-0063 For 99-13 Twin Cam models EVOLUTION AND TWIN CAM ADAPTERS 3801-0105 Adapter for PART #3801-0063 (allows jig to bore 84-99 Evolution Big Twin models) 3801-0103 Adapter for PART #DS-196410 (not available) allows jig to bore 06 Dyna and all 07-13 Big Twin models
SUG. RETAIL $1,845.95 507.95 270.95
LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS
3.5”-3.8125” BIG TWIN CASE BORING JIG AND ADAPTER •Takes the guesswork out of boring the engine case cylinder spigot bore •PART #3801-0104 adapts boring jig PART #3801-0036 for use with 99-07 Twin Cams with bore sizes up to 3.8125” •Will work with all aftermarket engine cases that utilize stock location of cylinder stud holes and overall case widths that have a bore not greater than 3.8125” •Jig is designed for use in heavy-duty 15” drill press •Made in the U.S.A. PART # 3801-0104
DESCRIPTION 99-07 Twin Cam adapter for boring tool PART #3801-0036
SUG. RETAIL $830.95
CRANKPIN NUT CLEARANCE GAUGE
ENGINE
•Used to mark the clearance between the cases and the crankpin nuts when using stroker flywheels •Made in the U.S.A. PART # 53-0005
DESCRIPTION For 84-99 Big Twin Evolution style motors
SUG. RETAIL $23.95
DS-196212
TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL
LIGHTING CYLINDER TORQUE PLATES
CRANKCASE MAIN BEARING LAP TOOL
•Torque plates must be used when boring or honing late-model aluminum cylinders •Simulate running stress conditions •Come with instructions •Made in the U.S.A.
•Performs easy, precise alignment and lapping of right and left crankcase races for oversize bearings •Sold individually •Made in the U.S.A. PART # DS-196105
DESCRIPTION For 84-99 Big Twin (except Twin Cam)
SUG. RETAIL $937.95
BREATHER REAMING TOOL
DS-196213
DESCRIPTION For 88” or 96” 99-13 Twin Cam, 3.75”-3.875” For 99-13 Twin Cam Screamin Eagle, 4”-4.060” For 84-99 Evolution cylinders, 3.4375”-4” bore w/ stock bolt pattern Adapter bolt kit for 86-03 XL, 94-03 Buell (for use w/ PART #DS-196212)
DESCRIPTION For 84-99 Big Twin motors
SUG. RETAIL $847.95
3801-0192 3801-0193
TAPPET PUMP AND TEST STANDS •Allows you to fill hydraulic tappets before assembling valve train •Helps diagnose loose or spongy tappets that could eventually lead to bleed-down issues or sticky tappets that won’t pump up due to poor hydraulic unit fitment
3801-01931 1
DESCRIPTION Tappet pump and test stand for 99-13 Twin Cam hydraulic tappets Adaptor for 84-99 Evo hydraulic tappets
Must be used in conjunction with PART #3801-0192.
CABLES
482.95
BRAKES
39.95
TANKS & OIL FILTERS
•Compact design •O-ring on drive retains tool in 7/16” wrench or socket •7/16” drive allows more rotation without contacting motor •Flange design allows downward force to be applied to tool PART # 3801-0002
PART # 3801-0192
SUG. RETAIL $489.95 489.95
TAPPET SCREEN PLUG TOOL
•Reams grooved or worn breather hole to +.030” •Does not require disassembly of the motor cases •Requires oversized (+.030”) breather gear •Made in the U.S.A. PART # DS-196500
PART # 3801-0130 3801-0129 DS-196212
HANDLEBARS, CONTROLS & MIRRORS
SUG. RETAIL $265.95 65.95
DESCRIPTION Tappet screen plug tool
DASHES & GAUGES SUG. RETAIL $12.95
TAPPET BLOCK/ OIL PUMP ALIGNMENT TOOL
FOOTRESTS & LICENSE PLATE FRAMES
•Big Twin Evolution tappet blocks do not have counter-bored bolt holes; therefore, when a tappet block is removed (or even just loosened) it should be reinstalled using an alignment tool to ensure that the lifters track properly on the camshaft •This tool makes the process quick and easy, ensuring the durability of your installation •Tool also aligns Twin Cam oil pump to the cam support plate; two tools required •Sold each PART # DS-199099
All part numbers in BLUE are new for 2013.
FRAMES, SUSPENSION & FENDERS
DESCRIPTION For 84-13 Big Twin
SUG. RETAIL $14.95
WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL
1441
SECTION
21
WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS
TAPPET BLOCK/OIL PUMP TO CAM PLATE ALIGNMENT TOOL •Used to align oil hole from crankcase to tappet block •Can also be used to align rocker box bases on Evolution head (requires two tools) •Aligns Twin Cam oil pump to cam support plate; two required •Sold each •Made in the U.S.A. PART # DS-197077
DESCRIPTION For 84-13 Big Twin
OIL PUMP SEAL INSTALLER
TAPPET OIL SCREEN PLUG TOOL •Used to remove the tappet oil screen plug •Removes oil screen without removing exhaust •Made in the U.S.A.
SUG. RETAIL $21.95
PART # DS-198638
DESCRIPTION For Evolution Big Twin motors
•Easily installs oil pump seal below gear surface for a no-leak fit •For use on all Big Twin aluminum oil pumps (except Twin Cam) •Made in the U.S.A.
SUG. RETAIL $30.95
PART # DS-197059
DESCRIPTION Oil pump seal installer
SUG. RETAIL $86.95
EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS
CRANKCASE OIL PASSAGE DRILLING JIG
OIL PUMP SNAP RING INSTALLER
•Used to install S&S oil pumps on early motor cases •Jig is made from steel and heat-treated for durability •Made in the U.S.A.
•Allows easy installation of outer snap ring on oil pump shaft without stretching the snap ring •Fits Big Twin oil pumps (except Twin Cam) •Made in the U.S.A.
PART # DS-197009
PART # DS-197058
DESCRIPTION Oil pump jig
SUG. RETAIL $43.95
53-0027
DESCRIPTION Snap ring installer
SUG. RETAIL $63.95
1601-2910
ELECTRICAL
LIGHTING 3801-0073
HANDLEBARS, CONTROLS & MIRRORS MASTER FLYWHEEL BALANCING KIT CABLES
BRAKES TANKS & OIL FILTERS DASHES & GAUGES
•Kit includes: a platform scale, two 500g balance weights and a 1,000g balance weight; one balance shaft, one balance shaft nut, one balance stand and one rod support stand; taper adapters for 84-85 Big Twin, a drive side shaft adapter for 86-99 XL, and cam side shaft adapters for 84-99 Big Twin; drive side shaft adapter for 84-99 Big Twin, shaft adapter counterweight, drive side collar spacers for 86-99 XL and a 1,000g bob weight assembly •Works with OEM, S&S and any other flywheel that does not have pressed-in crankpins •Includes a complete set of detailed instructions •Bob weight shim kit available separately •For use with 84-99 Big Twin and 86-99 XL flywheels •Made in the U.S.A. PART # 53-0027 1601-2910
DESCRIPTION Master flywheel balance kit w/ scale Master flywheel balance kit w/o scale
SUG. RETAIL $988.95 749.95
PART # 3801-0073
DESCRIPTION Shim kit (includes two each 2.7g, 5.4g, 8.1g, 10.8g, 13.4g and one each 50g, 100g)
SUG. RETAIL $44.95
FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES
3801-0098 DS-198627
WHEELS & AXLES
SPROCKET SHAFT HOLDER
SPROCKET SHAFT BEARING REMOVER
HARDWARE, CHEMICALS & TOOLS
•Use to remove Timken® bearing from sprocket shaft without removing shaft from stock flywheels •Made in the U.S.A.
COVERS, SECURITY & GENERAL
PART # DS-198627 DS-196145
1442
DS-197049
DS-196145
DESCRIPTION For 86-02 Big Twin For 86-03 XL, 94-02 Buell
•Used to hold flywheel assembly in vise, with or without left case attached •Made in the U.S.A. SUG. RETAIL $231.95 276.95
PART # 3801-0098 DS-197049
All part numbers in BLUE are new for 2013.
DESCRIPTION For 06 Dyna, 07-13 Big Twin For 84-99 Big Twin, 99-06 Twin Cam (except 06 Dyna)
SUG. RETAIL $90.95 116.95
SECTION DS-196052
21
WINDSHIELDS & FAIRINGS TOURING
DS-196051
FLYWHEEL SOCKETS •Made for a lifetime of service from 4130 chromoly steel •Now available in 1/2” or 3/4” drive •Machined for 100% nut-to-socket and drive-end contact •Eliminate nut rounding and risk of injury •Made in the U.S.A. PART # 1/2” DRIVE DS-196104 DS-196111 DS-196112 3/4” DRIVE DS-196110
DESCRIPTION For crankpin nut OEM #23969-83; 84-99 Big Twin 11/2” For pinion shaft nut OEM #24016-80; 84-89 Big Twin 11/4” For crankpin nut OEM #23901-81; 86-99 XL 13/8” For sprocket shaft nut OEM #24017-80; 84-99 Big Twin 15/8”
DS-196053
SPROCKET SHAFT BEARING INSTALLATION TOOL AND OPTIONAL SLEEVES SUG. RETAIL
$73.95 73.95 73.95
80.95
AUDIO & COMMUNICATION LUGGAGE
•Use on 55-76 XL and K models to install the flywheel assembly into the left crankcase Timken® bearing •Optional sleeves (DS-196051 and DS-196053) for use on 86-03 XL and 94-03 Buell •Made in the U.S.A. NOTE: Both optional sleeves are required to install the sprocket bearing on 83-03 XL and Buell models. PART # DESCRIPTION DS-196052 Sprocket shaft bearing installation tool for 55-76 XL OPTIONAL SLEEVES DS-196051 Sleeve tool only (2.5” L) for 86-03 XL DS-196053 Sleeve tool only (2.060” L) for 86-03 XL
SEATS & SISSY BARS EXHAUST
SUG. RETAIL $173.95 37.95 35.95
FUEL/AIR SYSTEMS ENGINE
DS-196048
TRANSMISSION & DRIVELINE SPROCKET SHAFT BEARING/RACE/ SEAL INSTALLATION TOOLS
3801-0097
•Used on 84-02 Big Twin to install the flywheel assembly to the left crankcase Timken® bearing •Made in the U.S.A. PART # DS-196048 3801-0097
DESCRIPTION Sprocket shaft bearing installation tool Adapter for PART #DS-196048 (allows tool to install sprocket shaft bearing for 06 Dyna Glide and all 07-13 Big Twin)
GASKETS & SEALS
SPROCKET SHAFT SEAL INSTALLER
SUG. RETAIL $186.95
•Installs sprocket seal to proper depth •Holds seal perfectly square •Use driver handle PART #DS-198634 (sold separately) •Made in the U.S.A. PART # DS-198628
75.95
DESCRIPTION For 95-03 XL and 95-02 Buell
ELECTRICAL
LIGHTING SUG. RETAIL $100.95
HANDLEBARS, CONTROLS & MIRRORS CABLES
DS-196042
DS-196045
SPROCKET SHAFT BEARING RACE TOOL
•Multi-faceted tool has many uses •Removes flywheel sprocket shaft inner bearing race on 03-07 Twin Cam •Can be used to remove Timken bearing (OEM #9028 or #9029) on 84-07 Big Twins, including JIMS 120” engines •Can be used to remove Timken bearing pinion shaft inner bearing race on 86-07 XL, including all Buells •Can also be used to remove press-fit transmission gears and bearings from input and output shafts on all 02-07 V-Rod models •Made in the U.S.A. PART # 3801-0088
DESCRIPTION Bearing and race puller tool
SUG. RETAIL $298.95
PART # DESCRIPTION BEARING RACE TOOL DS-196046 For 96-02 Big Twin DS-196045 For 86-03 XL, 94-02 Buell DRIVER HANDLE DS-196042 Handle/driver only (ea.)
DASHES & GAUGES
SUG. RETAIL $70.95 70.95 75.95
FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES
•Tool cuts the time it takes to install sprocket shaft bearings and seals •Uses a smooth operating rack and pinion system to quickly press bearings and seals into place •Includes four adapters that quickly convert the tool to install Sportster sprocket shaft bearings, or Big Twin and Sportster sprocket shaft seals •Made in the U.S.A. DESCRIPTION For 84-02 Big Twin (including 99-02 Twin Cam engines) and 86-03 XL
TANKS & OIL FILTERS
•Used to remove and install Timken® bearing race on motor cases •Use drivers with handle PART # DS-196042 •Made in the U.S.A.
SPROCKET SHAFT BEARING AND SEAL INSTALLATION TOOL
PART # 3801-0023
BRAKES
DS-196046
BEARING AND RACE PULLER TOOL
HARDWARE, CHEMICALS & TOOLS SUG. RETAIL $339.95
All part numbers in BLUE are new for 2013.
COVERS, SECURITY & GENERAL
1443
SECTION
21
WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE
CRANKSHAFT BEARING TOOL
SPROCKET SHAFT PROTECTOR CAP
•Used to remove and install the right crankcase bearing in Twin Cam motors •Allows straight installation, without damage to the case •Comes with instructions •Made in the U.S.A. PART # DS-196194
•Protects sprocket shaft when using crank assembly removing tool PART #DS-196089 or a press •Made in the U.S.A.
DESCRIPTION For 99-02 Twin Cam A motors
SUG. RETAIL $175.95
PART # DS-198637
DESCRIPTION For 84-06 Big Twin
SUG. RETAIL $42.95
SEATS & SISSY BARS 3801-0100
3801-0099
EXHAUST
ENGINE ROTATOR FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS
•Rotates flywheel/piston assembly with engine still in frame or on a bench •The perfect tool when doing pushrod adjustments, building big-inch engines and checking operating clearances •Also can be used to keep the flywheel assembly from rotating when torquing the cam drive sprockets retention bolts •Built with a long socket design, making it easier to use without a 1/2” drive extension on your 1/2” driver •Made in the U.S.A.
HANDLEBARS, CONTROLS & MIRRORS CABLES
BRAKES TANKS & OIL FILTERS DASHES & GAUGES
•To rotate the crankshaft during engine timing and clearance checks •Offset design so it will not interfere with the motor case •Chrome-plated with EZ Grip screwdriver-style handle for comfort and more turning power PART # 3801-0200 3801-0207
DESCRIPTION For 84-06 Big Twin (except 06 Dyna); ten-spline For 06 Dyna, 07-13 Big Twin; twenty-four spline
SUG. RETAIL $56.95 60.95
NOTE: Not for use with an air or electric impact wrench; this tool is only guaranteed for use with hand drivers. PART # 3801-0099 3801-0100
DESCRIPTION For all 07-13 Big Twin, 06 Dyna Glide For 84-06 Big Twin (except 06 Dyna Glide)
SUG. RETAIL $108.95 108.95
ELECTRICAL
LIGHTING
3801-0200
RATCHETING CRANKSHAFT WRENCHES
CRANKSHAFT BEARING ENDPLAY SETUP TOOL •For Big Twin engines to set up crankshaft bearing endplay •Diameter of the bolt is turned slightly smaller than the actual crankshaft diameter, allowing the inner bearing races to be installed and removed without pressing them on or off •Allows much faster changing of shims and faster setup time •Made in the U.S.A. PART # 3801-0196
DESCRIPTION For Big Twin engines
MIGHTY BITE FLYWHEEL LOCK AND DECOMISSIONED TAG •Locks flywheel in place when performing service work to the connecting rods or pistons with the cylinders off the engine •Installs the case in place of the crank position sensor •Highly-visible tag designates bike as decomissioned •Made in the U.S.A. PART # 3801-0235
DESCRIPTION For 99-13 Twin Cam motors w/ crank position sensor
SUG. RETAIL $33.95
SUG. RETAIL $56.95
CRANKSHAFT JAM TOOL •Locks the crankshaft through the timing mark hole on the left •Enables timing and camshaft work to be done without the crankshaft moving from the timing mark line PART # SS-B
CRANKSHAFT TURNING TOOL
DESCRIPTION For Big Twin and XL models
SUG. RETAIL $11.95
FRAMES, SUSPENSION & FENDERS
•Rotates the crankshaft; may be used while engine is in or out of the frame •Enables work on any part of the engine •Slides over the left side of the splined crankshaft PART # SS-C
DESCRIPTION For Evolution Big Twin
SUG. RETAIL $47.95
FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL
1444
PINION BUSHING REAMING TOOL KIT •Use to line-ream pinion bushing in cam cover from right case race •A must for any serious engine builder •Can also be used to ream idler gear bushings on 57-E84 XL models •Made in the U.S.A. PART # DS-196125
DESCRIPTION For 84-99 Big Twin, except Twin Cam
SUG. RETAIL $421.95
MOTOR SPROCKET SHAFT SEAL INSTALL TOOL •Use to press oil seal over sprocket shaft into case •Use with tool PART #DS-196048 •Made in the U.S.A. PART # DS-196047
DESCRIPTION For 84-10 Big Twin and Twin Cam
All part numbers in BLUE are new for 2013.
SUG. RETAIL $99.95
SECTION
21
WINDSHIELDS & FAIRINGS TOURING PINION GEAR NUT SOCKET WRENCH •Use to secure or remove pinion gear nut to pinion shaft •1/2” drive •Made in the U.S.A. PART # DS-196147
DESCRIPTION For 84-92 Big Twin
AUDIO & COMMUNICATION
PINION GEAR PULLER •Use to remove pinion gear •Made in the U.S.A. SUG. RETAIL $45.95
PART # DS-196169
DESCRIPTION For all 84-89 Big Twin
SUG. RETAIL $247.95
LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS
PINION GEAR LOCK TOOL
ENGINE
DS-197048 •Use to lock pinion gear when torquing the pinion gear nut •Simple to use; just align underneath gear and screw into case •With Big Twin tool, use PART #DS-196147 to tighten pinion nut •Made in the U.S.A. PART # DS-197048 3802-0009
DESCRIPTION For 84-99 Big Twin (except Twin Cam) For 00-13 XL and 00-09 Buell
SUG. RETAIL $137.95 46.95
3802-0009 PART # 3801-0014
DESCRIPTION For 91-99 XL and 94-99 Buell
SUG. RETAIL $46.95
PINION SHAFT RUN OUT AND GEAR DRIVE BACKLASH TOOL
LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES DESCRIPTION For 99-13 Twin Cam and 84-99 Evolution Big Twin
SUG. RETAIL $112.95
3801-0040
DASHES & GAUGES FRAMES, SUSPENSION & FENDERS
•Used to remove and install crankshaft bushing in the cam support plate •Tool is piloted for accurate operation •Comes with instructions •Made in the U.S.A.
CAM RELIEF TOOLS SUG. RETAIL $125.95
CAM COVER PULLER •Designed to remove the cam cover •Made in the U.S.A. PART # DS-196170
DESCRIPTION For 84-99 74” and 80” Big Twins, and 86-03 XL models
BRAKES TANKS & OIL FILTERS
CRANKSHAFT BUSHING REMOVER/ INSTALLER
DESCRIPTION For 99-10 Twin Cam motors
GASKETS & SEALS ELECTRICAL
•Makes for a great display to show and explain to customers the condition of their crankshaft •Simplifies and speeds up the process of checking pinion shaft run out •Quickly and accurately measures gear drive backlash on Twin Cam engines •Mounts to cam chest side of engine case using designated mounting holes of tool combined with cam cover bolt holes •Includes tool plate, +/-0.001” dial indicator, PART # thumb screws and hardware 3801-0144 •Made in the U.S.A.
PART # DS-196195
TRANSMISSION & DRIVELINE
SUG. RETAIL $27.95
•These tools are used to make quick work of case machining when installing a high-lift cam •Bolt to the case; use inner cam bearing to support cutter spindle •Adjustable cutter diameter and threaded depth feed for precise control of cut and a much cleaner, professional job than a die grinder •Can be used on an assembled engine •Power with a drill motor, or use on an unassembled case in a milling machine •Make a job everyone hates a lot easier and cleaner •Made in the U.S.A. PART # 3801-0038 3801-0039 3801-0040 3801-0041
DESCRIPTION For 70-99 Big Twin (except Twin Cam) For 99-05 Twin Cam (single spindle) For 99-05 Twin Cam (dual spindle) For 91-13 XL (except XR1200)/94-07 Buell
All part numbers in BLUE are new for 2013.
SUG. RETAIL $148.95 199.95 319.95 229.95
FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL
1445
SECTION
21
WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS
CAMSHAFT REMOVAL/ INSTALLATION TOOL
CAMSHAFT INSTALLATION KIT
•Used to remove and install camshafts and bearings •Provides precision alignment of camshafts in the support plate •Made in the U.S.A. PART # DS-196199
SUG. RETAIL
DESCRIPTION For 99-06 Twin Cam (except 06 Dyna) for removing/ installing cams and bearings; for 00-06 FXST/FL and L00-05 FXD to remove and install cams only
$178.95
•Contains degree wheel, dial indicator, adjustable magnetic stand, and three positive stops (10mm, 12mm and 14mm threads) •Can be used to install and adjust timing of any cam •Wooden carrying case PART # CIK-001
DESCRIPTION Camshaft installation kit
SUG. RETAIL $129.95
3801-0068
EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL
CAM COVER HOLDING TOOL
DS-198809
•Clamps in vice •Holds cam cover flat and helps prevent damage/scratches when removing and installing bushings •Made in the U.S.A.
CAM BEARING INSTALLER AND REMOVER TOOL •Made from hardened steel •Includes removal shaft with installer and hold-down bolts •Update kit includes removal shafts required for use on 06-13 models listed •Made in the U.S.A. PART # DS-198809 3801-0068
PART # DS-196144
DESCRIPTION For 99-06 Twin Cam; repl. OEM #42325 Update kit for 06 Dyna and all 07-13 Twin Cam models
CABLES
BRAKES
SUG. RETAIL $93.95
SUG. RETAIL $177.95 144.95
LIGHTING HANDLEBARS, CONTROLS & MIRRORS
DESCRIPTION For 84-99 Big Twin, except Twin Cam
CAM BEARING PULLER CAM ASSEMBLY TOOL •Holds both cams in an upright position while lowering cam support plate over both guides and cam journal guides •Made from a non-marring material that will not damage any of the cams’ surfaces •Made in the U.S.A. PART # 3801-0066
DESCRIPTION For 06 Dyna models and all 07-13 Twin Cam models
DS-196198
TANKS & OIL FILTERS
SUG. RETAIL $158.95
3801-0061
•Use to remove the cam ball bearings from the camshafts after they are removed from the support plate •Removes bearing straight without binding or slipping •Made in the U.S.A. PART # DS-196193
DESCRIPTION For 99-06 Twin Cam (except 06 Dyna) for removal of bearings; for L00-06 FXST/FL and L00-05 FXD for removal of front cam bearing
SUG. RETAIL
$221.95
3801-0160
3801-0161
DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL
1446
CAM BEARING INSTALLATION TOOL
INNER CAM BEARING REMOVAL TOOL •Used to remove inner cam bearing without damaging the crankcase •Tool is also designed to keep rollers from falling into the crankcase •Comes with instructions •Made in the U.S.A. PART # DS-196198 3801-0061 DS-196156 DS-197056
DS-196156
DESCRIPTION For 00-06 Twin Cam motors (except 06 FXD) For 06 Dyna models and all 07-13 Twin Cam models For 84-99 Big Twin, except Twin Cam For 86-90 XL
SUG. RETAIL $163.95 243.95 171.95 171.95
•Use to install the two inner cam bearings •Designed to press from the letter side of the inner cam bearing to eliminate any damage to the bearings, cam or case •Will set bearings .023”-.028” below case surface •Made in the U.S.A. PART # DESCRIPTION FOR 99-13 TWIN CAM MOTORS 3801-0160 Installer tool 3801-0161 Repl. drive for PART #3801-0160
All part numbers in BLUE are new for 2013.
SUG. RETAIL $197.95 66.95
SECTION
21
WINDSHIELDS & FAIRINGS TOURING
CAM BUSHING LINE REAMING TOOL •Finish size will be .0008”.0015” over the cam journal •Made in the U.S.A.
INNER CAM BEARING INSTALLATION TOOL •Easily presses the inner cam bearing smoothly into the right case with the cases assembled to the proper depth •Made in the U.S.A. PART # DS-197047
PART # DS-196114
AUDIO & COMMUNICATION
DESCRIPTION For use on 84-99 Big Twin, except Twin Cam
SUG. RETAIL $280.95
LUGGAGE
DESCRIPTION For 84-99 Big Twin, except Twin Cam
SUG. RETAIL $147.95
SEATS & SISSY BARS
LIFTER HOLDER TOOL •Magnetic tip holds lifters up and out of the way while servicing cams •Designed for use on 84-13 Big Twin and 86-13 XL valve lifters •Essential for trouble-free cam servicing •Made in the U.S.A.
INNER CAM BEARING GO AND NO-GO GAUGE •The only accurate and easy way to check the size of the inside diameter of the inner cam bearing •Use these gauges to check whether your cam will be too loose or too tight •Sold in a set of two •Made in the U.S.A. PART # DS-197010
PART # 3801-0158
EXHAUST
DESCRIPTION Lifter holder tool
SUG. RETAIL $81.95
FUEL/AIR SYSTEMS ENGINE
DESCRIPTION For 84-99 Big Twin, except Twin Cam
TRANSMISSION & DRIVELINE
SUG. RETAIL $73.95
GASKETS & SEALS BIG TWIN CAM SEAL INSTALLER/REMOVER CAM BEARING AND BUSHING ALIGNMENT TOOL •Use to check the alignment of cam bearing to cam cover bushing to within .0003” of centerline •Binding of tool indicates misalignment of cam cover and bushing •Made in the U.S.A. PART # DS-196315
DESCRIPTION For 84-99 Big Twin and aftermarket cases (except Twin Cams)
SUG. RETAIL $80.95
ELECTRICAL
•Installs and removes cam seals without removing the cam cover •Use to remove cam cover from the case •Made in the U.S.A. PART # DS-197036
LIGHTING
DESCRIPTION For 84-99 Big Twin, except Twin Cam
DS-196099
SUG. RETAIL $132.95
DS-196101
HANDLEBARS, CONTROLS & MIRRORS CABLES
DS-196313
CAM CHAIN TENSIONER TOOL
CAM OR PINION BUSHING INSTALLER DRILL JIGS •Use to install bushing and drill dowel pin hole to factory specification •Use staking dowel pin PART #DS-196313 •#31 jobber length HSS drill bit included with jigs •Made in the U.S.A.
•Designed to unload the pressure on the primary and secondary chain tensioners •Also checks spring loads on chain tensioners •Comes with instructions •Made in the U.S.A. PART # DS-196196
BRAKES
DS-196100
DESCRIPTION For 99-06 Twin Cam motors (except 06 FXD)
SUG. RETAIL $48.95
PART # DS-196099 DS-196101 DS-196100 DS-196313
DESCRIPTION SUG. RETAIL For cam bushing OEM #25581-70; 84-99 Big Twin, except Twin Cam $48.95 For cam bushing OEM #22586-37; 86-13 XL, 91-09 Buell (except 1125R) 48.95 For pinion bushing OEM #25582-54/73; 84-92 Big Twin 48.95 Staking dowel pins (10-pk.) 15.95
PART # 3801-0060 DS-196201
DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES
CAM/CRANK SPROCKET LOCK TOOL •Designed to lock the camshafts and crankshaft sprockets when removing, replacing and torquing the sprocket bolts •Made of non-marring Delrin® •Comes with instructions •Made in the U.S.A.
TANKS & OIL FILTERS
WHEELS & AXLES
CAM INSTALLATION TOOL DS-196201
DESCRIPTION For 06 Dyna models and all 07-13 Twin Cam models For 99-06 Twin Cam motors (except 06 FXD)
SUG. RETAIL $68.95 51.95
•Eases cam installations •You won’t have to remove pushrod, pushrod covers, tappets, tappet guides or rocker covers PART # DS-199098
All part numbers in BLUE are new for 2013.
DESCRIPTION For all 84-99 Big Twin
HARDWARE, CHEMICALS & TOOLS SUG. RETAIL $44.95
COVERS, SECURITY & GENERAL
1447
SECTION
21
WINDSHIELDS & FAIRINGS
DS-196043
DS-196042 DS-197011
TOURING AUDIO & COMMUNICATION LUGGAGE
CAM AND PINION GEAR GAUGE PINS
INNER CAM BEARING INSTALL TOOL •Use to install inner cam bearings •For use with handle PART #DS-196042 •Made in the U.S.A. PART # DS-196044 DS-196043 DS-196042
DESCRIPTION Cam bearing tool only for 84-99 Big Twin, except Twin Cam Cam bearing tool only for 86-90 XL, 87-90 Buell Handle/driver only
SUG. RETAIL
ELECTRICAL
LIGHTING HANDLEBARS, CONTROLS & MIRRORS
SUG. RETAIL $29.95 29.95
PINION BUSHING PULLER •Use to remove pinion bushing from cam cover in one easy operation •Use with cam cover holder PART #DS-196144 •Made in the U.S.A. PART # DS-196157
DESCRIPTION For 84-99 Big Twin
DS-199105
NOTE: There are two basic differences between 90-99 cam gear sizes and earlier years. The overall range of gear pin measurements (from the largest gears to the smallest) was reduced in ‘90 from .006” to .003”. The large gears are the same size for both 84-89 and 90-99 (green and black color codes). Gear size measurements (over pins) are listed in the 1990 H-D manual using .108” pins instead of .105” pins (as for earlier years). For the same gear, measurement over .108” pins will be approximately .012” larger than for .105” pins. For 92 engines, stock cam gears are interchangeable with earlier versions but gear outer diameters have been reduced by .025”.
FUEL/AIR SYSTEMS
GASKETS & SEALS
DESCRIPTION .105” for 84-89 Big Twin .108” for 90-99 Big Twin Evolution
•Used to measure the outside diameter of cam drive gears •Precision machined from a high-quality steel alloy •Available in .105” or .108” dia. •Sold in pairs •Made in the U.S.A.
EXHAUST
TRANSMISSION & DRIVELINE
PART # DS-197011 DS-197012
GAUGE PINS
SEATS & SISSY BARS
ENGINE
$67.95 65.95 75.95
•Use to check pinion gear for pitch diameters •A complete sizing chart is included with the .105” gauge pins •Check service manual for sizing chart •Sold in sets of two •Made in the U.S.A.
PART # DS-199105 DS-199106
DESCRIPTION .105” gauge pins (pr.) .108” gauge pins (pr.)
SUG. RETAIL $23.95 23.95
SUG. RETAIL $158.95
PRESSURE RELIEF PSI TESTING TOOL •A must for any Twin Cam engine builder •Bench test camplate before installation, set and seal relief valve, set spring pressure to desired pop-off psi; Feuling® recommends the camplate valve be seated 0-30 psi with full pop off at 55-60 psi •Includes regulator, 0-100 psi pressure gauge, gasket and necessary hardware •Made in the U.S.A.
PRESSURE RELIEF SPRING/VALVE REMOVAL TOOL •For easy removal and installation of pressure relief spring, by-pass valve and roll pin •Holds relief spring down and away from roll pin •Made in the U.S.A. PART # 3801-0070
DESCRIPTION For all Twin Cam engine camplates
SUG. RETAIL $49.95
PART # 3801-0071
DESCRIPTION For all Twin Cam engine camplates
SUG. RETAIL $199.95
CABLES TOP DEAD CENTER TOOL BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS
•Tool makes it easy to find exact top dead center of any engine •Invaluable when dialing in cams or performing any of a number of checks and modifications based on the position of the crankshaft •Available for engines with 14mm and 12mm spark plug holes •Made in the U.S.A. PART # 3801-0024 3801-0025
DESCRIPTION 14mm 12mm
SUG. RETAIL $32.95 32.95
FOOTRESTS & LICENSE PLATE FRAMES
COVERS, SECURITY & GENERAL
1448
•Helps determine if piston jet is stuck open or stuck closed •Assists engine rebuilder to clear jet of all assembly lubes, verify PSI number the jet switches to “on” and visualize spray pattern before cases are sealed •Does not include piston jet shown in picture •Made in the U.S.A. PART # 3801-0194
DESCRIPTION For 99-13 Twin Cam
SUG. RETAIL $199.95
DELUXE PISTON PIN PULLER
•Support plate gives a non-marring, flat surface to push piston bottoms against when installing rings or cylinders •Made in the U.S.A.
•Interchangeable piston adapters •Made of durable 6061 aluminum •Fits all piston pins from 12mm (1/2”) to 24mm (1”) •Works on both full skirt and short skirt (slipper) pistons •Non-marring aluminum pin adapters •Durable blue anodized finish with laser-engraved logo •Patent pending
PART # DS-196407
PART # 3801-0147
WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS
PISTON JET TEST STAND
PISTON SUPPORT PLATE
DESCRIPTION Piston support plate
SUG. RETAIL $82.95
DESCRIPTION Deluxe piston pin puller
All part numbers in BLUE are new for 2013.
SUG. RETAIL $70.95
SECTION
21
WINDSHIELDS & FAIRINGS PISTON PIN PULLER
PART # 865
TOURING
PISTON PIN KEEPER TOOL
•Removes pins from 12-25mm •Won’t damage piston or connecting rod
•Used to install piston retaining rings •Made in the U.S.A.
DESCRIPTION Piston pin puller
PART # DS-196072
SUG. RETAIL $28.95
DESCRIPTION For 84-99 Big Twin (except Twin Cam), 86-03 XL
3801-0143
AUDIO & COMMUNICATION
SUG. RETAIL $123.95
DS-198808
LUGGAGE SEATS & SISSY BARS
PISTON PIN RETAINING RING INSTALLER AND REMOVER •Works on all pistons with retaining ring dimple •Insert claw in dimple and pull or push •Made in the U.S.A.
EXHAUST
NOTE: Not recommended for use on forged pistons.
WRIST PIN REMOVER •Used to remove the wrist pins on all Harley-Davidson motors •Comes with instructions •Made in the U.S.A. ®
PART # DS-196197
DESCRIPTION Wrist pin tool
PART # 3801-0143 DS-198808
DESCRIPTION For 99-13 Twin Cam For 84-99 Big Twin and 86-13 XL (except Twin Cam); repl. OEM #34623B
SUG. RETAIL $122.95 108.95
SUG. RETAIL $126.95
•Installs and removes piston rings 3/64” to 1/4” thick •Comfortable vinyl grip handles DESCRIPTION Piston ring installer pliers
ENGINE TRANSMISSION & DRIVELINE
PISTON RING INSTALLER
PART # 3801-0189
FUEL/AIR SYSTEMS
GASKETS & SEALS SUG. RETAIL $9.95
ELECTRICAL ROD HOLDER TOOL •Holds the rods in place when reaming or honing the wrist pin bushings •Made in the U.S.A. PART # DS-196276
LIGHTING PISTON RING END GAP TOOL
DESCRIPTION For most V-Twin and Buell Blast applications
SUG. RETAIL $149.95
3801-0236
•Makes measuring ring end gap faster and more accurate 3801-0237 •Flanged design allows piston ring to fit squarely in cylinder bore every time PART # DESCRIPTION SUG. RETAIL 3801-0236 For H-D 95”, 103” and 110” motors w/ standard size pistons (3.875” or 4” bore) $58.95 3801-0237 For JIMS 120”, 131” and 135” motors w/ standard size pistons (4.125” or 4.310” bore) 60.95
•Works with all styles of rings •Fits pistons ranging from 3.750” to 4.125” •Made in the U.S.A. DESCRIPTION Ring compressor
TANKS & OIL FILTERS
SUG. RETAIL $29.95
CONNECTING ROD WRIST PIN BUSHING TOOL
DASHES & GAUGES
•Used to remove and install wrist pin bushings in 99-06 Twin Cam motors •Comes with instructions •Made in the U.S.A.
WRIST PIN BUSHING REAMING TOOL •Used to ream wrist pin bushings to the proper inner diameter •Can be used with rods in or out of the motor •Lead-in taper makes it easy to use •Made in the U.S.A.
PART # DS-196192
NOTE: Some wrist pin bushings will require a small amount of ball honing to give specified fit (see H-D manual for specifications).
•Use to remove and install wrist pin bushings without removing rods from crankcase •Made in the U.S.A.
PART # DS-196503 DS-196501 DS-196502
CABLES
BRAKES
RING COMPRESSOR
PART # 1601-1602
HANDLEBARS, CONTROLS & MIRRORS
DESCRIPTION For 00-06 FXST, 99-06 FL, 99-05 FXD, .9276”-.9280” For 84-99 Evolution, .7919”-.7923” For 86-13 XL and 94-02 Buell, .7913”-.7917”
SUG. RETAIL $244.95 212.95 212.95
DESCRIPTION Wrist pin bushing tool
FRAMES, SUSPENSION & FENDERS SUG. RETAIL $123.95
WHEELS & AXLES
PISTON PIN BUSHING TOOL
PART # DS-196159
DESCRIPTION For 84-99 Evolution Big Twin, 86-13 XL and Buell (except 1125R)
All part numbers in BLUE are new for 2013.
FOOTRESTS & LICENSE PLATE FRAMES
HARDWARE, CHEMICALS & TOOLS SUG. RETAIL $123.95
COVERS, SECURITY & GENERAL
1449
SECTION
21 DS-196277
WINDSHIELDS & FAIRINGS TOURING ROD LAPPING SET AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS
•Arbor assembly includes 1.5” and 1.625” laps •For use on all Big Twins that have replaceable races, including aftermarket engines •Made in the U.S.A. PART # DS-196164
DESCRIPTION For all Big Twin and XL models (except Twin Cam)
SUG. RETAIL $374.95
EVOLUTION CYLINDER STUD ASSEMBLY TOOL •Assembly tool features a captive hardened ball bearing dimensionally set 1” from top of tool •Made of high tensile steel •Works on all Evolution Big Twin and XL models •Made in the U.S.A.
ENGINE
PART # 3801-0045
TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL
LIGHTING HANDLEBARS, CONTROLS & MIRRORS
DESCRIPTION Stud assembly tool
DESCRIPTION For Twin Cam, .927” wrist pin For Evolution, .791” wrist pin
SUG. RETAIL $27.95 27.95
CYLINDER SLEEVE HOLD-DOWNS •Specialty nuts are used to hold down cylinder sleeves during service •Allow motor to be turned over with heads off •Nuts fit 3/8”-16 UNC thread •Feature 3/4” hexagon with a small cylinder protruding down to catch the cylinder stud •Case-hardened and zinc-plated •Sold in packs of four
•Designed to set Twin Cam and Evolution exhaust studs, Shovelhead rocker box studs, 4-speed transmission end studs, Bendix & Keihin carb flange studs and most other 5/16” studs •Made in the U.S.A. DESCRIPTION 5/16” stud installation tool
PART # DS-196277 DS-196094
SUG. RETAIL $56.95
5/16” STUD INSTALLATION TOOL
PART # DS-196039
ROD ALIGNMENT TOOLS •Use to check rod straightness without removing the rods from the cases •Alignment tool is 4.5” long •Available in Twin Cam and Evolution applications •Made in the U.S.A.
EXHAUST FUEL/AIR SYSTEMS
DS-196094
SUG. RETAIL $23.95
PART # 3801-0199
DESCRIPTION For Evolution Big Twin, Sportster and Twin Cam w/ 3/8” stud
SUG. RETAIL $42.95
CABLES
BRAKES TANKS & OIL FILTERS DASHES & GAUGES
EXHAUST STUD DRILL PLATE
EXHAUST GASKET SEAL INSTALLER TOOL
•Designed to drill broken exhaust studs •Can be used with most motors still in the frame •Includes drill bushing and 1/4” drill bit •Made in the U.S.A.
•Installs fragile exhaust seal with ease and will position seal evenly to exhaust port of head •Can be used with exhaust flange nuts or JIMS handle PART NO. DS-196042; sold separately
SUG. PART # DESCRIPTION RETAIL DS-197032 For 84-13 Big Twin, 86-13 XL and 94-09 Buell (except 1125R) $115.95
FRAMES, SUSPENSION & FENDERS
HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL
1450
DESCRIPTION For 84-13 Big Twin and XL
SUG. RETAIL $42.95
3801-0168
FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES
PART # 3850-0121
0920-0062
TOP CENTER CASE BOLT SPOT FACER TOOL AND CENTER-THROUGH BOLT KIT
HEAD BOLT TORQUE GAUGE •This accurate gauge allows the measuring of 90° when tightening head bolts •Torquing sequence laser engraved on gauge, with instructions •Works on all Twin Cam and Evolution engines •Made in the U.S.A. PART# DS-197033
DESCRIPTION Head bolt torque gauge
•Prevents center right case bolt thread from becoming compromised from larger cylinder spigot bore diameter •Tool is needed to spot face the right case so bolt head will seat flat on case surface •Center-through bolt kit provides necessary case bolt retention
SUG. RETAIL $18.95
PART # FOR 99-13 TWIN CAM 3801-0168 0920-0062
All part numbers in BLUE are new for 2013.
DESCRIPTION Case bolt spot facer tool Center through bolt kit
SUG. RETAIL $93.95 17.95
SECTION DS-196408
WINDSHIELDS & FAIRINGS
TWIN CAM COMPRESSION RELEASE VALVE INSTALLATION KIT
ROCKER BOX COVER WRENCH •Designed to reach hard-to-get-at 3/16” Allen on the rocker boxes of Big Twin, Sportster and Buell models •Features a 3/16” drive for use with torque wrench •Vinyl cover offers comfort and minimizes chances of damage to finished surfaces PART # 3801-0028
DESCRIPTION Rocker box cover wrench
SUG. RETAIL $14.95
21
TOURING
•If you have a big-inch or high-compression Twin Cam and keep breaking starter motors, this is a must •Works on front and back head, with or without valves installed •Simply drill, spot face, tap and install compression release valves •Installation kit includes fixture, drill bit, spot face bit and thread-tapping tool •Thread-tapping tool is also available separately for other uses •Compression release valves must be purchased separately •Made in the U.S.A.
AUDIO & COMMUNICATION LUGGAGE
PART # DESCRIPTION FOR ALL TWIN CAM HEADS DS-196408 Twin Cam compression release installation kit DS-196409 Thread-tapping tool DS-196400 Compression release valves, 10mm x 1.0mm (pr.)
SUG. RETAIL $386.95 52.95 105.95
SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS
4-STROKE DUAL GAUGE LEAKDOWN TESTER
•Designed to check cylinder compression •Contains hoses for 10, 12 and 14mm spark plug applications •Features a quick-disconnect with a pressure-release valve and a 300 psi (20.67 bar) gauge •Packed in a convenient carry box, complete with instructions •Made in the U.S.A.
•Tool troubleshoots cylinder leakdown issues such as valve seat issues, bad rings and bad head gasket •Hose assembly has both 14mm and 18mm spark plug threads •Includes 12mm and 10mm adapter •Made in the U.S.A. PART # 3801-0173
ENGINE
COMPRESSION TESTER SET
PART # MP08-0188
DESCRIPTION Dual gauge leakdown tester
DESCRIPTION Compression test set
SUG. RETAIL $140.95
SUG. RETAIL $109.95
12MM AND 18MM SPARK PLUG AND OXYGEN THREAD CHASERS
•Holds cylinder head securely in place when doing repairs •Screws into spark plug hole •Features a 12mm threaded end and a 14mm threaded end •Hex shape allows mounting in any angle or position in vise •Made of steel and yellow zinc-plated •Made in the U.S.A. PART # DS-390286
DESCRIPTION Cylinder head holder
12MM SPARK PLUG RETHREADER
PART # 3807-0082 3807-0083
DESCRIPTION 12mm x 1.25” 18mm x 1.5”
ROCKER BOX WRENCH SET
PART # 3807-0119
PART # 53-0040
SUG. RETAIL $18.95
HANDLEBARS, CONTROLS & MIRRORS SUG. RETAIL $18.95 16.95
TANKS & OIL FILTERS
•Includes four Allen wrenches of different lengths for those hard-to-get-to rocker box screws •For use on all Big Twin and XL Evolution-style motors •Made in the U.S.A. DESCRIPTION Allen wrench set
DASHES & GAUGES SUG. RETAIL $89.95
3801-0198 3801-0203
ROCKER BOX COVER BOLT RATCHETING WRENCH •To install and remove rocker box covers •93/4” long chrome-plated single-end reversible wrench has a 1/4” drive and 3/16” replaceable Allen bit end •Low profile to allow clearance between frame and engine •Comfortable, ergonomic vinyl grip •Vinyl will not scratch chrome or paint •Replacement bits also available •Made in the U.S.A. PART # 3801-0198 3801-0202
DESCRIPTION For all HD rocker box covers Repl. 3/16” Allen bits, 3-pk.
LOWER ROCKER BOX WRENCH
SUG. RETAIL $60.95 14.95
CABLES
BRAKES
•Used to clean up dirty or damaged spark plug threads on Twin Cam, V-Rod and some Sportster models •Consists of a special 12mm spark plug thread with a lead in (for proper alignment) and flutes (for dirt and chip relief) •Also features a 5/8” hexagon with O-ring and female 3/8” square drive; requires the use of a 5/8” spark plug socket, or the female square requires the use of a male 3/8” square drive •Special 12mm spark plug thread ensures proper engagement DESCRIPTION 12mm spark plug rethreader
ELECTRICAL
LIGHTING
•Use to repair any I.D. thread that has been damaged •Will not cut oversize threads •Designed with three flutes and a generous lead-in pilot for the best feel when repairing threads •Available in two sizes
SUG. RETAIL $49.95
GASKETS & SEALS
3807-0082 3807-0083
CYLINDER HEAD HOLDER
TRANSMISSION & DRIVELINE
FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES
•Extra-long reversible ratcheting wrench is used to install/remove the lower rocker box •A special 7/16” socket protrudes out of the wrench to reach the application •Vinyl grip provides a comfortable, ergonomic grip and prevents the wrench from scratching or marring the bike
HARDWARE, CHEMICALS & TOOLS
PART # 3801-0203 3801-0204
COVERS, SECURITY & GENERAL
All part numbers in BLUE are new for 2013.
DESCRIPTION For 99-12 Twin Cam For 94-99 Evolution Big Twin
SUG. RETAIL $28.95 28.95
1451
SECTION
21
WINDSHIELDS & FAIRINGS 3801‑0134
TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS
DS‑196077
3801‑0136
3801‑0135
VALVE GUIDE REMOVAL/INSTALLATION TOOLS FOR SHOULDERLESS GUIDES
3801‑0137
•Available from JIMS to allow the proper removal or installation of shoulderless valve guides as well as valve seals •Made in the U.S.A. PART # DS‑196077 3801‑0136 3801‑0135 DS‑196078 3801‑0137 3801‑0134 DS‑196074
DESCRIPTION .560 dia. sleeve for correctly installing all Evolution and 99‑04 Twin Cam valve guides, use w/ PART #DS‑196074; repl. OEM #34731‑84 Sleeve for correctly installing all 05‑13 Twin Cam, 04‑13 XL, 04‑09 Buell (except 1125CR) 7mm valve guides; use w/ PART #DS‑196074 Sleeve for correctly installing all valve guides on 07‑13 110” CVO H‑D models Sleeve for correctly installing all Evolution valve guide seals, use w/ PART #DS‑196074; repl. OEM #34643‑84 Sleeve for correctly installing all 110” valve guide seals using H‑D seal No. 18046‑98; use w/ PART #DS‑196074 Remover for 05‑13 Twin Cam 7mm valve guides, 04‑13 XL, 04‑09 Buell (except 1125R) Driver/handle for removing all Evolution and 99‑04 Twin Cam guides; should also be used w/ tools listed above
ENGINE TRANSMISSION & DRIVELINE
SHOULDERED VALVE GUIDE DRIVER SET
GUIDE BALL HONES •Durable enough to size C630 bronze and cast iron valve guide materials •Available in 5/16” or 3/8” widths •Sold each
•Three‑piece set (3/8”, 11/32”, 5/16”) used to remove or install valve guides •Made in the U.S.A. PART # DS‑199100
DESCRIPTION Valve guide driver set
SUG. RETAIL $43.95
PART # 3801‑0222 3801‑0223
DESCRIPTION SUG. RETAIL Valve guide hone $24.95 3/8” Valve guide hone 25.95 5/16”
•Quality pilot lead‑in reamer is made of high‑speed steel •For 7mm valve guides H‑D No. 16461‑02 that are used in conjunction with the latest conical (Beehive) valve springs •Will also work on equivalent aftermarket 7mm valve guides PART # 3801‑0180
DS‑198917
GASKETS & SEALS ELECTRICAL
LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES
BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL
1452
SUG. RETAIL $40.95 42.95 70.95 51.95 42.95 60.95 34.95
7MM VALVE GUIDE REAMER
EXHAUST FUEL/AIR SYSTEMS
DS‑196074
DESCRIPTION For 05‑13 Big Twin (except S.E. models), 04‑13 XL
SUG. RETAIL $161.95
DS‑198919
VALVE SPRING SEAT AND VALVE GUIDE MACHINING TOOLS •Job‑shop quality machining tools available with carbide cutting tips •Valve guide tool machines valve guide outside diameters •Valve spring seat tools are used for lowering spring seats for high‑lift cams •Valve guide tools include an arbor; spring seat tools require arbor (sold separately) •Made in the U.S.A.
DS‑198921 PART # DS‑198917 DS‑198919 DS‑198921 DS‑198923 DS‑198924
DESCRIPTION Spring seat tool w/ 3/8” pilot for 74”‑80” Big Twin .500‑.600 lift cams 5/16” pilot for PART #s DS‑198917 and DS‑198921 thru DS‑198924 Valve guide machine tool w/ 11/32” pilot cuts guide to .530” diameter Valve guide machine tool w/ 3/8” pilot cuts guide to .562” diameter Valve guide machine tool w/ 3/8” pilot cuts guide to .625” diameter
SUG. RETAIL $146.95 64.95 161.95 161.95 161.95
VALVE GUIDE REMOVER/INSTALLER •Use for removing and installing valve guides •Adapters are supported by a stand that makes it easy to press valve guides in and out •A special guide alignment shaft holds the right angle for best possible guide installation •Save time and money on seat grinding by installing the guides in line with the valve seats •Kit includes base assembly, six adapters, three assembly pilots, three inserts and instructions •Adapters for working on 7mm valve guides available separately •Made in the U.S.A. PART # DS‑196310 3801‑0170 3801‑0171
DESCRIPTION For 84‑04 Big Twin, 86‑03 XL and some S.E. CVO Twin Cam models Adapter for 7mm valve guide assembly pilot Adapter for 7mm valve guide insert
•This tool from JIMS is necessary for removing or installing valves and springs •Made in the U.S.A. NOTE: For Beehive springs, order collar PART #3801‑0065 used with this tool DESCRIPTION For most Big Twin and XL models
DS‑196310 3801‑0170
SUG. RETAIL $611.95 44.95 25.95
VALVE SPRING COMPRESSOR
VALVE SPRING COMPRESSOR TOOL
PART # DS‑196013
MINI VALVE SPRING TESTER
SUG. RETAIL $186.95
•Used to remove and replace valve and new‑style conical valve spring •Requires the use of tool PART #DS‑196013 (available separately) •Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL 3801‑0065 For 05‑13 Big Twin models (except SE models) and 04‑13 XL and Buell (except 1125R) $77.95
All part numbers in BLUE are new for 2013.
•Works with bench vise, arbor, screw hydraulic or drill press •Cylinder body and piston are manufactured from 2024 aluminum with a steel spring plate mandrel •Precision 0‑1000 p.s.i. gauge is covered with a protective rubber boot to reduce shock to gauge during handling and use •Made in the U.S.A. PART # 3801‑0179
DESCRIPTION Mini valve spring tester
SUG. RETAIL $140.95
QUICK‑RELEASE VALVE SPRING COMPRESSOR TOOL •Features a slim cage head to easily reach down into close quarter heads and a compressor lever to speed up valve removal and installation •Designed to work on most American‑made cylinder heads •Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL DS‑196014 Valve spring compressor tool $96.95
SECTION
21
WINDSHIELDS & FAIRINGS ROCKER ARM BEARING/ BUSHING PULLER
TOURING
•Used to remove rocker bushing or bearing in one easy operation •Made in the U.S.A.
ROCKER BUSHING REAMING TOOL •Used to fit rocker bushings in line with each other •Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL DS-196118 For 84‑13 Big Twin, 86‑13 XL and Buell (except 1125R) $220.95
PART # DS-197057
DESCRIPTION For 84‑13 Big Twin and 86‑13 XL and Buell (except 1125R)
SUG. RETAIL
AUDIO & COMMUNICATION
$167.95
LUGGAGE PUSHROD TUBE HOLDER TOOL PUSHROD TUBE TOOL •Used to install and remove pushrod tube clips PART # 1601-2397
SEATS & SISSY BARS
•Makes for easy adjustment of adjustable pushrods, holding pushrod tubes up and out of the way •Sold each •Made in the U.S.A.
DESCRIPTION For Twin Cam and XL models
SUG. RETAIL $24.95
PART # 3801-0159
DESCRIPTION Pushrod tube holder tool
SUG. RETAIL $17.95
FUEL/AIR SYSTEMS
PUSHROD COVER CLIP INSTALLATION/REMOVAL TOOL •Will not mar or slip •Installs/removes clip professionally with just one hand in seconds •Constructed of tough black Delrin •For use on all V‑twins that use pushrod clips •Made in the U.S.A. PART # 3801-0169
ENGINE
INTAKE MANIFOLD WRENCH •Cuts the work time in half •No need to remove the gas tank •Made in the U.S.A. by Yost Performance
DESCRIPTION Pushrod cover clip installer/remover
SUG. RETAIL $61.95
PART # DS-196090
DESCRIPTION For all 84‑06 Big Twin and 86‑03 XL models (except fuel‑injected models)
SUG. RETAIL $11.95
DIPSTICK REMOVAL TOOL •Allows riders and mechanics to quickly and safely remove engine oil level dipstick that lies precariously close to a scorching hot exhaust pipe •Also aids riders with limited hand strength in easily checking their oil level •Has square hole for 3/8” ratchet fitment, 7/8” hex for wrench fitment and cutout for clearance around exhaust pipe •Made in the U.S.A.
INTAKE MANIFOLD WRENCH •To install and remove intake manifold socket‑head cap screws •Vinyl handle with ergonomic grip for comfort •Features a reversible action and 1/4” ball‑end Allen bit end for flexibility in tight areas •Made in the U.S.A. PART # 3801-0197
EXHAUST
DESCRIPTION For all Twin Cam and Evolution Big Twin
SUG. RETAIL $51.95
PART # 3801-0195
DESCRIPTION For 07‑11 FLHT/FLTR/FLHR/FLHX, 06‑11 FXD W/ OEM level indicators
TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL
LIGHTING
SUG. RETAIL
HANDLEBARS, CONTROLS & MIRRORS
$25.95
CABLES AUXILIARY FUEL TANK
3804-0027
MC800 REGULATED FUEL PUMP FOR F.I. •Easily adjustable fuel pressure from 0‑150 psi •Large dial gauge displays fuel 0702-0003 pressure on front •Pressure is regulated through large dial on front •Requires use of F.I. rated fuel bottle (PART #0702‑0003 or equivalent bottle with built‑in fuel return feature) and 5/16” F.I. high‑pressure fuel line (PART #0706‑0116 or equivalent 5/16” high‑pressure fuel line for use 0706-0116 with fuel injection applications); sold separately •Optional fuel line coupler (PART #0706‑0149) includes one male and one female fuel injection rail attachment for use with OE 0706-0149 quick‑disconnect fittings PART # 3804-0027 0702-0003 0706-0116 0706-0149
DESCRIPTION MC800 regulated fuel pump 3‑liter F.I. rated fuel bottle 5/16” F.I. rated fuel line (4‑ft.) Fuel rail and line coupler assembly
SUG. RETAIL $1,044.95 87.95 86.95 202.95
BRAKES
•For use when tuning a machine with the gas tank removed •Includes 4’ of 1/4” fuel line and a 1/4” in‑line fuel barb •On fuel‑injected machines, use Deluxe Auxiliary Fuel Tank PART #MP08‑0189 •Tank can also be used for refilling transmission oil on some machines •Holds up to 2,000cc or 1/2 gallon of fluid PART # P527
DESCRIPTION Auxiliary fuel tank
TANKS & OIL FILTERS
SUG. RETAIL $47.95
DELUXE AUXILIARY FUEL TANK •For use with fuel‑injected models with external fuel pumps as well as standard carburetor‑equipped motorcycles •Upgraded petcock for easier opening and closing •Built‑in fuel return line and breather on cap for use on fuel‑injected motorcycles •Graduated scale on side of bottle provides accurate measurement of fluid volume •Includes 4’ of 1/4” fuel line •Tank can also be used for refilling transmission oil on some late‑model MX bikes •Holds up to 2000cc or 1/2 gallon of fluid •Not designed for fuel storage PART # MP08-0189
All part numbers in BLUE are new for 2013.
DESCRIPTION Deluxe auxiliary fuel tank
DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS
SUG. RETAIL $80.95
COVERS, SECURITY & GENERAL
1453
SECTION
21
WINDSHIELDS & FAIRINGS PROFESSIONAL FUEL INJECTION PRESSURE TEST TOOL
TOURING AUDIO & COMMUNICATION
•Necessary diagnostic tool for all Delphi injected models •Can be installed in line with the motorcycle’s fuel supply system •Accurately diagnose causes of stalling, poor fuel economy, loss of power, hesitation, fuel pump‑related problems inside the tank and more •Fuel pressure test can be easily performed in about the time it takes to change a set of spark plugs •Includes all necessary parts to diagnose Delphi fuel injection; see chart below for included parts •Can be used for road tests and during Dyno diagnostics/tuning •Made in the U.S.A.
3801‑0034
LUGGAGE
3801‑0182
SEATS & SISSY BARS PINCER TOOLS EXHAUST FUEL/AIR SYSTEMS
PART # 3804‑0007
•Used to install O‑clips or Stepless® clamps •Side jaw tool is designed for use where space is restricted
DESCRIPTION For 01‑13 Big Twin w/ Delphi EFI
TOOL INCLUDES: DESCRIPTION Large gauge assembly 8” hose 2’ hose Fuel tank connection hose
SUG. PART # DESCRIPTION RETAIL 3801‑0034 Front jaw pincer tool $19.95 3801‑0182 Side jaw pincer tool 27.95
DESCRIPTION Throttle body connection hose Overflow hose Tee fitting
SUG. RETAIL $482.95 DESCRIPTION Valve assembly Ball valve Needle valve 08‑09 depth adapter
DESCRIPTION 1/4” tube sleeve #243 locktite Tool case Instruction sheet
ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL
LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES
BRAKES
FUEL PRESSURE TEST GAUGE •Quickly diagnoses loss of power, poor fuel economy, causes of stalling out, hesitation and more •Installs in seconds using a one‑point connection allowing in‑line service of the motorcycle’s fuel injection system •Can be used in conjunction with other diagnostic test equipment, including Dynamometers •0‑100 psi (0‑7 bar) •For all fuel‑injected H‑D models PART # 3804‑0031
FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL
1454
•Remove and install the lock ring on motorcycles •Allows access to the fuel filter and pump
DESCRIPTION Fuel pressure test gauge
SUG. RETAIL $299.95
PART # 3804‑0030
DESCRIPTION For 08‑13 FLHT series
SUG. RETAIL $43.95
FUEL PUMP RETAINER REMOVER TOOL •Removes/installs retaining ring holding fuel pump •Use for quick and easy service of fuel filter and other fuel‑related parts •Heavy‑duty construction •Made in the U.S.A. PART # 3804‑0009
MAIN JET TOOL •Used to change the main jet in S&S super carburetors that use #72 series jets •Made in the U.S.A. DESCRIPTION For 08‑13 FL models
TANKS & OIL FILTERS DASHES & GAUGES
FUEL TANK LOCK RING TOOL
SUG. RETAIL $138.95
PART # 53‑0452
DESCRIPTION S&S main jet tool
SUG. RETAIL $16.95
859
JET WRENCHES FOR MIKUNI
15‑8591
•Wrenches to fit Mikuni applications PART # DESCRIPTION SUG. RETAIL 859 Jet wrench for Mikuni large hex‑type main jets $2.95 15‑8591 Jet wrench; duplicate of original Mikuni die‑cast wrench 8.95
HSR42/45/48 CARBURETOR EASY TOOL KIT
•Kit includes all necessary tools to service Mikuni carbs PART # 866
DESCRIPTION Tool kit for Mikuni carbs
SUG. RETAIL $12.95
CARB CLEANER KIT
•All‑in‑one tool kit to make on‑the‑fly jetting adjustments PART # 3812‑0027
TOOL KIT FOR MIKUNI CARBS
•Fourteen‑piece wire set with spiral knurling for cleaning popular‑sized jets and carb body holes DESCRIPTION HSR42/45/48 easy tool kit
SUG. RETAIL $30.95
PART # 35‑3498
All part numbers in BLUE are new for 2013.
DESCRIPTION Carb cleaner wire set
SUG. RETAIL $14.95
SECTION
21
WINDSHIELDS & FAIRINGS SLOW JET SCREWDRIVER
TOURING
•This one tool replaces all those modified screwdrivers •Permits removal of Keihin slow jets without damage to the jet •A must for anyone who does carburetor work •Also can be used to adjust the idle-mixture screw on many carburetors •Made in the U.S.A. PART # DS-196002
DESCRIPTION Keihin slow jet screwdriver
PRIMARY COVER INSPECTION PLUG TOOL
AUDIO & COMMUNICATION
•Use this tool to remove and install primary inspection plug •Made in the U.S.A.
SUG. RETAIL $15.95
PART # 3802-0004
DESCRIPTION For 86-90 XL
SUG. RETAIL $25.95
LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS
PRIMARY DRIVE LOCKING TOOL •Used to lock primary for service work •Fits between the chain and motor sprocket •Works on all primaries •Made out of black Delrin® •Made in the U.S.A. SUG.
STARTER RING GEAR RIVET FIXTURE TOOL •Removes starter ring gear rivets from Big Twin clutch shells •Made in the U.S.A. PART # 3801-0090
DESCRIPTION For 90-06 Big Twin (except 06 Dyna)
SUG. RETAIL $417.95
PART # DESCRIPTION DS-198635 For all Big Twin and XL models
RETAIL $49.95
ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL
STARTER JACKSHAFT SEAL INSTALLER TOOL
LIGHTING
•Easily aligns and installs starter jackshaft seal (OEM #12066) without distorting or damaging seal •Seal is located in upper part of inner primary of Big Twins •Made in the U.S.A. PART # 3801-0091
DESCRIPTION For 94-06 Big Twin (except 06 Dyna)
SUG. RETAIL $107.95
HANDLEBARS, CONTROLS & MIRRORS CABLES
CLUTCH AND FLYWHEEL TOOL •Made from medium carbon steel with hardened jaws •Holds clutch hubs, flywheels, gears, sprockets, etc. •Features 8mm spanner pins •Jaws open up to 5” wide •Recommended for square-tooth-style clutch hubs •Not recommended for V-groove or half-round-style clutch hubs
OUTER PRIMARY STARTER BEARING REMOVER •Easily removes bearing (H-D #9063) from polished or chrome primary covers •Made from the highest quality aerospace steel •Made in the U.S.A. PART # DS-197081
BRAKES
DESCRIPTION For Big Twin and XL using H-D #9063 bearing
SUG. RETAIL $165.95
PART # P518
DESCRIPTION Clutch/gear holder
SUG. RETAIL $24.95
DS-197014
3802-0026
PART # DS-197082
DESCRIPTION For 84-99 Evolution Big Twin belt driven, 99-13 Twin Cam 5-speeds and 6-speeds
SUG. RETAIL $155.95
PART # DS-197014 3802-0026 3801-0107 DS-197015 DS-197016
DESCRIPTION For 5-speed FXST, Dyna Glide and 4-speed Big Twin For 06-13 Dyna models and all 07-13 Softail models For 07-13 FLHT/FLHR/FLHX/FLTR For 5-speed EVO FXR, FLT and FLHT models For 91-08 XL and 94-02 Buell
All part numbers in BLUE are new for 2013.
FRAMES, SUSPENSION & FENDERS
WHEELS & AXLES
•Locks primary for service work •Made in the U.S.A.
•Lock your transmission pulley for removing or installing pulley nut •Made in the U.S.A.
DASHES & GAUGES
FOOTRESTS & LICENSE PLATE FRAMES
PRIMARY LOCKING BAR
PULLEY LOCKER
TANKS & OIL FILTERS
SUG. RETAIL $28.95 47.95 48.95 28.95 28.95
HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL
1455
SECTION
21
WINDSHIELDS & FAIRINGS TOURING
TRANSMISSION PULLEY/SPROCKET LOCKNUT SOCKET •Use to remove or install sprocket/pulley nut •Socket throat is extra deep; also works on right-side drive transmissions •Hard chrome-plated and polished •Made in the U.S.A. PART # 3802-0041 3802-0003
DESCRIPTION For 07-13 Big Twin and 06 FXD, FXDWG with 6-speed Cruise Drive For 84-06 4-, 5- and 6-speed Big Twin transmissions (except 06 FXD, FXDWG)
3802-0003
AUDIO & COMMUNICATION
SUG. RETAIL $229.95 194.95
DS-196149
LUGGAGE SEATS & SISSY BARS EXHAUST
TRANSMISSION SPROCKET LOCKNUT WRENCHES
INNER PRIMARY COVER BEARING AND SEAL REMOVER/ INSTALLER TOOL
FUEL/AIR SYSTEMS
•Safely removes and installs inner primary bearing (OEM #9135) without any damage to new bearing by pushing on outer perimeter of bearing •Also removes and installs inner primary bearing and seal that transmission mainshaft passes through (OEM #12052A) •Made in the U.S.A.
ENGINE
PART # DESCRIPTION SUG. RETAIL 3801-0092 For L84-06 FXST/FLST, 85-06 FLT/FLHT/FXR/FXD/FXDWG $165.95
TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL
LIGHTING HANDLEBARS, CONTROLS & MIRRORS
•Inner collar will retain wrench to nut for safer work •Remove hex nut from end of main drive gear that secures the rear drive transmission pulley •Extra-long two-piece design •Made in the U.S.A. PART # DS-196149 3802-0029
DESCRIPTION For 84-06 Big Twin (except 06 Dyna) For 06 Dyna models and all 07-13 Twin Cam models
SUG. RETAIL $166.95 166.95
CLUTCH SPRING TOOL •Used to release clutch spring tension when removing or installing clutch components •Made in the U.S.A.
PRIMARY CHAIN ALIGNMENT TOOL •For primary chain alignment •For aligning the teeth on the clutch shell with the teeth on the motor sprocket •Quick and easy to use •Time-saving tool eliminates the need to take multiple measurements PART # 3806-0008
PART # DS-197079
DESCRIPTION For 86-90 XL
SUG. RETAIL $68.95
DS-199220
DESCRIPTION For Evolution-type engines
SUG. RETAIL $23.95
DS-197061 DS-199221
CABLES CLUTCH SPRING COMPRESSION TOOLS •These tools make it easy to remove and re-install retainer rings on diaphragm clutches •Made in the U.S.A.
BRAKES
PART # DS-199220 DS-199221
TANKS & OIL FILTERS DASHES & GAUGES
DESCRIPTION For 90-97 Big Twin, 91-06 XL For 86-90 XL
SUG. RETAIL $56.95 56.95
DS-197060
FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL
1456
CLUTCH SPRING COMPRESSOR TOOL •Used to release clutch spring so retainer ring can be easily removed and installed •For 91-03 XL applications, compressor nut PART #DS-197061 must be used in conjunction with compressor tool PART #DS-197060 (sold separately) •Made in the U.S.A.
CLUTCH SPRING COMPRESSION TOOL
PART # DS-197060
•For removal of clutch spring and plates •Offers easy access to spring retaining ring
DS-197061
DESCRIPTION Spring compressor tool for 90-97 Big Twin and 91-03 XL Spring compressor nut for 91-03 XL and Buell
SUG. RETAIL $109.95 47.95
PART # DS-197026
DESCRIPTION For 90-97 Big Twin and 91-03 XL; repl. OEM #38515
All part numbers in BLUE are new for 2013.
SUG. RETAIL $68.95
SECTION 3803-0009
3803-0007
WINDSHIELDS & FAIRINGS
3803-0011
CLUTCH HUB PULLER
3803-0010
SCORPION CLUTCH LOCK PLATES •Specifically designed to be used to lock outer clutch basket to inner hub for removal and installation •Made in the U.S.A. PART # 3803-0010 3803-0007 3803-0009 3803-0011
DESCRIPTION For 98-06 Big Twin models and 86-90 XL models For 90-97 Big Twin models, 91-06 XL models and 94-02 Buell models (except Blast and XB9R) For 86-89 Big Twin models Scorpion clutch lock plate set (set of 4)
TOURING
•Used to remove wet and dry clutch hubs without removing clutch release rod •Made in the U.S.A.
AUDIO & COMMUNICATION
PART # DS-196158
DESCRIPTION For 84-90 Big Twin
SUG. RETAIL $85.95
25.95 27.95 84.95
EXHAUST FUEL/AIR SYSTEMS
CLUTCH ASSEMBLY SERVICE TOOL •Safely disassembles and assembles clutch shell assembly •Easily removes and installs clutch hub from its bearing •Safely removes and installs clutch shell ball bearing (OEM #37906-90) without any damage to new bearing by pushing on the outer perimeter of bearing •Made in the U.S.A.
•Can be used on 3-, 5- or 10-finger clutch hubs and 45” clutch hubs •Will also work on Big Twin motor sprocket, alternator cover and early XL clutches as well as many other applications •Made in the U.S.A. PART # DS-196286
PART # 3801-0095
DESCRIPTION Clutch hub puller
DESCRIPTION For 90-06 Big Twin
ENGINE TRANSMISSION & DRIVELINE SUG. RETAIL $370.95
LIGHTING
•Specifically designed to remove an S&S high-performance clutch •Also helpful when removing a stock clutch from a damaged mainshaft •Attachment allows easy removal of the inner primary bearing race •CNC-machined from 4140 tool steel and heat treated for maximum reliability and service life •Made in the U.S.A. PART # 3803-0020
DESCRIPTION Clutch/inner primary bearing race puller
SUG. RETAIL $149.95
•When reinstalling the clutch, use this tool to align the clutch plates •Made in the U.S.A. SUG. RETAIL $93.95
PART # 3803-0001
DESCRIPTION For 02-13 V-Rod
SUG. RETAIL $36.95
CLUTCH HUB PULLER
BRAKES
FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES
•Use to remove clutch hubs •For E84 Big Twin models •Remove the hub without removing the transmission end cover on Big Twin models •It may be used on L84-90 hubs by enlarging a few puller holes DESCRIPTION Clutch hub puller
CABLES
DASHES & GAUGES
CLUTCH ALIGNMENT TOOL
•Kit includes puller, center bolt and four nuts •Makes pulling a Pro Clutch or Primo diaphragm clutch easy •Made in the U.S.A.
PART # DS-196061
HANDLEBARS, CONTROLS & MIRRORS
TANKS & OIL FILTERS
CLUTCH HUB PULLER FOR PRO CLUTCH AND PRIMO DIAPHRAGM SPRING CLUTCHES
DESCRIPTION Clutch hub puller
GASKETS & SEALS ELECTRICAL
SUG. RETAIL $81.95
CLUTCH/INNER PRIMARY BEARING RACE PULLER
PART # DS-196021
LUGGAGE SEATS & SISSY BARS
SUG. RETAIL $25.95
UNIVERSAL CLUTCH HUB PULLER
21
CLUTCH HUB REMOVING DRIVER •Use to remove clutch hub from the transmission mainshaft •Slight tap onto the transmission mainshaft to remove clutch hub •Left-hand thread SUG. RETAIL $50.95
PART # SS-D
All part numbers in BLUE are new for 2013.
DESCRIPTION For 84-90 Big Twin
SUG. RETAIL $35.95
HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL
1457
SECTION
21
WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS
INNER PRIMARY BEARING RACE INSTALLER
INNER PRIMARY BEARING RACE TOOL
•Features a radial thrust bearing that decreases the effort required to install a bearing race by 30% •CNC-machined from 4140 tool steel and heat treated for maximum reliability and service life •Made in the U.S.A. PART # 3803-0021
•Used to remove and install the inner primary bearing race •Works on left- and right-side drive 5- or 6-speed transmissions •Made in the U.S.A.
DESCRIPTION Inner primary bearing race installer
SUG. RETAIL $216.95
PART # 3802-0002
DESCRIPTION For 84-13 Big Twin primaries
SUG. RETAIL $304.95
EXHAUST CRUISE DRIVE MAIN CASE SEAL INSTALLER
FUEL/AIR SYSTEMS MAIN DRIVE GEAR BEARING TOOL •Used to install the inner and outer fifth gear bearings to the factory depth •Made in the U.S.A.
ENGINE
PART # DS-196049
TRANSMISSION & DRIVELINE
DESCRIPTION For 91-06 Big Twin and 91-05 Sportster and Buell (5-speed)
SUG. RETAIL $61.95
•Developed to specifically work with H-D’s 6-speed transmission bearings •Driver style seal installer installs main seal to correct depth without applying any stress to bearings or seals, and won’t damage bearings, unlike a pushing or pull type of installer •Made in the U.S.A. PART # 3801-0175
DESCRIPTION For all 06-13 6-speed HD with cruise drive
SUG. RETAIL $146.95
DS-198630
GASKETS & SEALS ELECTRICAL
LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES
BRAKES TANKS & OIL FILTERS DASHES & GAUGES
DIAL INDICATOR GAUGE TOOL •Designed with the special H-D thread pitch for mounting to cases for checking end play on engines or transmissions •1/4”-20 and 5/16”-18 threads on mounting rods •Can be used in any position to check cam end play, rocker end play, breather gear end play, flywheel run out and more •Includes indicator gauge, threaded rods, swivel clamp, hardware and instructions •Made in the U.S.A. PART # 3801-0140
DESCRIPTION Dial indicator gauge tool
SUG. RETAIL $283.95
3802-0028
TRANSMISSION DOOR PULLER •Removes transmission door with gears and shaft attached •Puller will not damage door bearings •Made in the U.S.A. PART # DS-198630 3802-0028
DESCRIPTION For 84-06 Big Twin 5-speeds For 06 Dyna models and all 07-13 Twin Cam models
SUG. RETAIL $107.95 149.95
FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL
1458
FAT 5 TRANSMISSION DOOR PULLER AND BEARING TOOL •Removes and installs transmission door bearings •Also removes transmission door without removing the complete transmission assembly •Door bearings must be replaced if using tool to pull door from case •Made in the U.S.A. PART # 3802-0023
RIGHT-SIDE DRIVE TRAP DOOR PULLER •Properly removes transmission trap door for right-side transmissions •Made in the U.S.A.
DESCRIPTION For JIMS Fat 5 overdrive transmissions
SUG. RETAIL $385.95
PART # 3802-0027
All part numbers in BLUE are new for 2013.
DESCRIPTION SUG. RETAIL For right-side drive transmissions $179.95
SECTION
21
WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION TRANSMISSION BEARING HOUSING REMOVER AND INSTALLER
CRUISE DRIVE 6-SPEED MAIN DRIVE GEAR REMOVER TOOL
•Use on all 84-98 Big Twin to remove and install bearings on 5-speeds and aftermarket 6-speeds •Can also be used to pull trapdoors on 84-06 Big Twin 5-speeds and aftermarket 6-speeds •Made in the U.S.A.
•Removes main drive gear from main bearing correctly while in transmission case •Eliminates need for arbor press and risk of case damage •Made in the U.S.A.
NOTE: Housing bearings must be replaced when pulling door.
PART # DESCRIPTION SUG. RETAIL 3802-0042 For 06 Dyna, 07-13 Twin Cam w/ 6-speed cruise drive $169.95
PART # DESCRIPTION SUG. RETAIL 3802-0034 For 84-06 Big Twin 5-speeds and aftermarket 6-speeds $507.95
INTERCONNECT SEAL LEAK TESTING TOOL
CRUISE DRIVE 6-SPEED TRAP DOOR BEARING REMOVER/ INSTALLER •Accurately installs/ removes lubed ball bearing into transmission trap door •No arbor press needed •Made in the U.S.A.
•Checks sealing of interconnect seal H-D No.45359-00 •Seal is required to seal the oil passage way from right case to the balancer tensioner plate; leaking can cause over oiling of the lower end that decreases horsepower from oil drag •Can also be used to check pressure lost at the balancer tensioner plate
PART # DESCRIPTION SUG. RETAIL 3802-0043 For 06 Dyna, 07-13 Twin Cam w/ 6-speed cruise drive $241.95
PART # 3801-0178
LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE
DESCRIPTION For 00-13 Twin Cam “B” motors
SUG. RETAIL $43.95
GASKETS & SEALS
DS-196055
ELECTRICAL 3802-0022
MAIN DRIVE GEAR TOOLS
LIGHTING
•PART #DS-196055 is used to install the main drive gear and main bearing without removing the transmission •PART #3802-0022 is only used to install the main drive gear without removing the transmission •Made in the U.S.A. PART # DS-196055
HANDLEBARS, CONTROLS & MIRRORS
DESCRIPTION For 84-06 Big Twin and 91-06 XL
SUG. RETAIL $229.95
PART # 3802-0022
DESCRIPTION For 06 Dyna models and all 07-13 Twin Cam models
CABLES
BRAKES
DS-196056
MAINSHAFT BEARING RACE TOOL FOR BIG TWIN
TANKS & OIL FILTERS
4-SPEED MAINSHAFT CLUTCH GEAR PULLER •Removes kick starter clutch gear successfully, without damage to the gear •Made in the U.S.A.
•Used to remove and install the inner bearing race on t he transmission mainshaft •Made in the U.S.A. PART # DESCRIPTION FOR L84-06 BIG TWIN (EXCEPT 06 DYNA) DS-196056 Mainshaft bearing race tool 3802-0044 Repl. puller plate
SUG. RETAIL
PART # DS-198626
$228.95 61.95
DESCRIPTION For 84-86 Big Twin w/ kick-start 4-speed transmission
MAIN DRIVE GEAR AND BEARING SERVICE TOOL KIT
DESCRIPTION For 84-06 Big Twin 5- and 6-speed transmissions (except 06 FXD, FXDWG)
SUG. RETAIL
$231.95
DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES
•Use to remove and install main drive gear and bearings •Works on left- and right-side drive 5- and 6-speed transmissions •The steel components of this kit are hard chrome-plated and polished; aluminum components are anodized candy-apple red •Includes a very detailed tool sequence instruction sheet •Made in the U.S.A. PART # 3802-0001
SUG. RETAIL $298.95
HARDWARE, CHEMICALS & TOOLS
SUG. RETAIL $339.95
All part numbers in BLUE are new for 2013.
COVERS, SECURITY & GENERAL
1459
SECTION
21
WINDSHIELDS & FAIRINGS DS-196070
TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS
MAIN DRIVE GEAR BEARING REMOVAL TOOL •Removes old bearing straight and will not damage the transmission case •Can be used without removing transmission from the bike •Made in the U.S.A. PART # DS-198633
3802-0024
MAIN DRIVE GEAR BEARING/SEAL INSTALLATION TOOLS
DESCRIPTION For 84-06 Big Twin 5-speed transmissions
SUG. RETAIL $136.95
•Install both bearings and seal with use of a 1-ton press •Holds bearings and seal square to its bore, eliminating any marring •Install bearings and seal to correct depth •Made in the U.S.A. PART # DS-196070 3802-0024
DESCRIPTION For 84-90 5-speed Big Twin For 06 Dyna models and all 07-13 Twin Cam models
SUG. RETAIL $61.95 101.95
EXHAUST DS-196154
FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL
BIG TWIN TRANSMISSION MAIN SEAL TOOL
MAIN DRIVE GEAR BEARING TOOL
•Optional drivers used in conjunction with main shaft seal tool allow installation of seals •Tool and drivers sold separately •Made in the U.S.A. PART # DS-196154 DS-198632 DS-196288
•Safely installs new main transmission case bearing; does not remove bearing •Holds bearing square to its bore, eliminating any marring of bearing bore •Made in the U.S.A.
DS-196288
DESCRIPTION Main shaft seal tool Optional seal driver for 85-02 Big Twin 5-speed Optional seal driver for 84-86 Big Twin 4-speed
PART # 3802-0025
DESCRIPTION For 06 Dyna models and all 07-13 Twin Cam models
SUG. RETAIL $187.95
SUG. RETAIL $264.95 85.95 66.95
LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES
BRAKES
GEAR SPACING TOOL
MAIN DRIVE GEAR SEAL INSTALLER
•Used to align main and countershafts when checking proper gear spacing •Made in the U.S.A.
•Use to install main drive gear oil seal to the proper depth with transmission assembled •Includes protective sleeve for seal, which can be used to protect main drive gear inner bearings during installation •Made in the U.S.A. PART # 3801-0096 DS-198634
TANKS & OIL FILTERS
DESCRIPTION For 06 Dyna and all 07-13 Big Twin models For all 5-speed Big Twin models
PART # DS-196054
DESCRIPTION For 86-90 XL/Buell 87-90 transmissions
SUG. RETAIL $47.95
SUG. RETAIL $102.95
5-SPEED TRANSMISSION SHAFT INSTALLER
97.95
•Installs transmission shaft without the use of a hydraulic or arbor press •Made in the U.S.A.
DASHES & GAUGES
PART # DS-197083
FRAMES, SUSPENSION & FENDERS
DESCRIPTION For 84-06 Big Twin
SUG. RETAIL $77.95
FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL
1460
TRANSMISSION OIL DRAIN TOOL •Directs the transmission fluid from the bottom of the case to the drain pan instead of on the frame •Helical design locks into place to ensure it stays put •Drain plug can be removed through an opening in the center of the tool •CNC machined from billet aluminum •Made in the U.S.A.
SHIFT FORK GAUGE •Used to set and align shift forks on 4-speed Big Twin •Made in the U.S.A. PART # DS-196162
DESCRIPTION For 84-85 Big Twin
SUG. RETAIL $129.95
PART # 0712-0314
DESCRIPTION For 09-13 FLHT, FLHX, FLHR, FLTR models
All part numbers in BLUE are new for 2013.
SUG. RETAIL $29.95
SECTION 3802-0008
21
WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION
SHIFTER SHAFT SLEEVE TOOL •Use to install shifter shaft sleeve •Can be used to remove, install replacement or upgrade shifter shaft sleeve, assembly and drum •Made in the U.S.A. PART # 3802-0008
3802-0049
DESCRIPTION For upgrades to latest shifter assembly on 5-speeds, 84-99 Big Twins, 84-00 FLHT/FXR/FXD. Also for replacement of shifter sleeve (H-D #34979-00) for 00-06 FXST, 01-06 FLHT and 01-05 FXD For 06-13 6-speed H-D cruise drive models
LUGGAGE
SHIFTER SHAFT REMOVAL TOOL
3802-0049
SUG. RETAIL
$35.95 53.95
•Loosens/removes both shifter shafts from transmission door, allowing further disassembly of transmission •Made in the U.S.A. PART # 3802-0031
DESCRIPTION SUG. RETAIL For 06 Dyna models and all 07-13 Twin Cam models $22.95
3802-0047
SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE
FORK STEM NUT WRENCH 3802-0048
TRANSMISSION CASE SHIFTER SHAFT SEAL INSTALLER
•Makes installing shifter shaft seal precise and effortless •Aligns, centers and installs shifter seal to correct depth •Made in the U.S.A. PART # 3802-0047 3802-0048
DESCRIPTION For 06-13 6-speed Twin Cam, 84-05 XL For 80-99 Big Twin, 99 5-speed Twin Cam, 99-06 FXST, 99-05 FLH/FXD
SUG. RETAIL $32.95
PART # 3805-0107
DESCRIPTION For 96-13 FLHT and 94-13 FLHR
TRANSMISSION & DRIVELINE SUG. RETAIL $48.95
DS-196042
LIGHTING DS-196005
•Used to adjust the preload of the neck bearing on Springer forks •Improved design and triple prong engagement allows for precise neck bearing adjustment •Tool is a 1” diameter socket, 3/8” square drive for use with a ratchet •This is the only tool on the market to do this particular task •Made in the U.S.A. DESCRIPTION For Springer forks
HANDLEBARS, CONTROLS & MIRRORS
STEERING HEAD BEARING RACE TOOL •Removes and installs steering head bearing race on 84-13 Big Twin, 86-13 XL and 94-02 Buell OEM frames (will also work on most aftermarket frames) •Must be used with tool driver spacer PART #DS-196029 and handle/driver PART #DS-196042; sold separately •Made in the U.S.A. SUG. RETAIL $55.95
PART # DS-196005 DS-196029 DS-196042
DESCRIPTION Bearing race tool Tool driver spacer Handle/driver
CABLES
SUG. RETAIL $81.95 42.95 75.95
NECK BEARING TOOL
BRAKES TANKS & OIL FILTERS DASHES & GAUGES
•Slips under the tapered roller bearing on the lower triple tree to allow safe and easy removal •Used with any standard “T” puller and two pieces of 5/16”-18 threaded rod •Made in the U.S.A. PART # DS-196015
GASKETS & SEALS ELECTRICAL
32.95
NECK BEARING ENDPLAY ADJUSTMENT TOOL FOR SPRINGER
PART # 3850-0160
•Machine steel construction •Loosens/tightens and torques to specs 11/2” stem nut without radio removal •Saves up to 45 minutes for an experienced mechanic •Made in the U.S.A.
NECK BEARING ADJUSTER TOOL
FRAMES, SUSPENSION & FENDERS
•Tapered end allows easy access to the neck bearing adjusting star on H-D front ends •181/2” long
DESCRIPTION Neck bearing tool
SUG. RETAIL $40.95
PART # 3850-0165
DESCRIPTION Neck bearing adjusting tool
SUG. RETAIL $32.95
FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES
STEERING HEAD BEARING RACE INSTALLER •Use to install races and cups straight and true in the steering head •Made in the U.S.A. PART # DS-198625
DESCRIPTION For 84-13 Big Twin w/ stock or custom frames
SUG. RETAIL $67.95
All part numbers in BLUE are new for 2013.
HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL
1461
SECTION
21
WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE
HOLLOW AXLE PLUG TOOL
PIVOT BEARING TOOL
•Helps establish a centerpoint during alignment •Plug into left and right ends of axle •Includes two plugs •Made in the U.S.A.
•For removing/installing swingarm pivot bearing H-D No. 9076 or 9270A on 84-13 Softails •Can also be used to remove/install front fender spherical bearings on 97-02, 04-11 FLSTS/FLSTSB that use H-D bearing No. 9139 •Made in the U.S.A. PART # 3805-0071
DESCRIPTION For 84-13 FXST/FLST
PART # 3805-0072
DESCRIPTION For 08-13 FXD and XL
SUG. RETAIL $139.95
SUG. RETAIL $106.95
SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS
SWINGARM PIVOT BEARING TOOL
CLEVEBLOCK SPREADING TOOL
•Removes and installs the swingarm pivot bearings on 84-99 Softail models •Can also be used to remove and install front fender pivot bearings on DESCRIPTION all 97-01 FLSTS models PART # DS-197028 Pivot bearing tool •Made in the U.S.A.
•Tool spreads the swingarm cleveblocks, allowing for the installation of the swingarm •Comes with instructions •Made in the U.S.A. SUG. RETAIL $49.95
PART # DS-196066
DESCRIPTION For 84-01 5-speed rubber-mount frames
SUG. RETAIL $43.95
ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL
LIGHTING HANDLEBARS, CONTROLS & MIRRORS
REAR AXLE 36mm NUT RATCHET WRENCH
SWINGARM BUSHING TOOL
•To install and remove 36mm rear axle nuts •Double-hexagon flank drive wheel •Low profile wheel allows access to the nut without removal of the exhaust •1/2”-square drive hole allows a torque wrench to be used when tightening •Black vinyl grip prevents scratches and provides a comfortable, ergonomic handle
•Allows installation of delicate, silicone cleveblock bushings in swingarm without damage •Tool presses on outer sleeve of bushing •Can be used with or without a press PART # DS-196067
CABLES
DESCRIPTION For 84-01 FLT, FLHT, 84-99 FXR and all aftermarket FXR-style frames
SUG. RETAIL
DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL
1462
DESCRIPTION For all FL and Buell models w/ 36mm axle nuts
SUG. RETAIL $82.95
$226.95
POWERTRAIN ALIGNMENT TOOL
BRAKES TANKS & OIL FILTERS
PART # 3811-0060
WHEEL ALIGNMENT TOOL •For rear wheel alignment •Fast, accurate and easy to use •Eliminates the need to use a tape measure •Proper wheel alignment extends chain/sprocket and belt life PART # 3811-0015
DESCRIPTION For Softail/Dyna and XL
SUG. RETAIL $20.95
COMPACT CHAIN BREAKER •For 420 to 530 chain •Will push link pin completely through link/side plate •Handle folds away for easy storage •Replaceable pin is heat-treated for strength and wear resistance •Will not work on EK 530 MVO/MVX •Max pin extension to drive out chain links is 18mm; the maximum pin extension required to drive out the chain link is determined by measuring your chain’s width from outside face plate to outside face plate •Made in the U.S.A. PART # DESCRIPTION P501 Chain breaker
SUG. RETAIL $26.95
PART # 3801-0089
P501
P502
PART # DESCRIPTION P502 Repl. pin
•Easily and safely aligns powertrain to correct position on most touring models •Alignment service must be performed when engine, transmission or swingarm has either been removed or repaired •Safety in handling and performance could be greatly affected without the accurate alignment this tool provides •Made in the U.S.A.
SUG. RETAIL $3.95
DESCRIPTION For 93-08 FLHT/FLHR/FLHX/FLTR
SUG. RETAIL $774.95
HEAVY-DUTY CHAIN BREAKER •Made for use on all 420 to 630 size chains •Compression screw forces the pin out of chain for removal PART # of extra links DS-192276 •Sold each
All part numbers in BLUE are new for 2013.
SUG. RETAIL $16.95
SECTION 3806-0010 MP08-135
T6 CHAIN TOOL •For breaking 520 to 530 chain •For pressing on and off 520 and some 525 master link side plates •For clip-type master links with press-fit side plates •Lightweight, 6 oz. including press plates and handle (8 oz. with pouch) •Will push link pin completely through link/side plate •Handle detaches for easy storage; to reduce the weight even more an MP Tool (PART #MP08-0161), 8mm combination wrench or 8mm socket with extension can be used as the handle •Custom pouch holds tool securely and includes pocket for extra chain/master links and a large accessory pocket •Body forged from high-strength 4130 chromoly •Body bolt and extractor bolt manufactured from billet high-strength 7075 T-6 aluminum •Replaceable pin is heat-treated for strength and wear resistance •Press plates manufactured from light weight 6061 T-6 aluminum •This tool does not rivet chains or master links •Perfect for any tool pack •Handle accommodates the use of Motion Pro’s 5/16” bits; this feature eliminates the need for a separate 5/16” bit driver to carry around on those long rides PART # 3806-0009
DESCRIPTION T6 chain tool
SUG. RETAIL $75.95
AUDIO & COMMUNICATION JUMBO CHAIN TOOL
LUGGAGE
•Designed to break roller chain up to #630 – fits all standard and O-ring chain sizes #520 to #630 •Designed to rivet chain up to #530 (not #630) •Masterlink side plate press kit included to press on side plates on chains up to #530 (not #630) •Screws and attachments are heat treated for strength and durability •The extractor pin is precisely guided by a removable guide, ensuring long pin life •May be bolted to a work bench, supported in a vise or held by handle •When bolted to a solid surface, air or electric wrenches may be used to break chain •Recommended for heavy-duty use •Replacement pin is made in the U.S.A. DESCRIPTION Jumbo chain tool Repl. pin
PART # P566 P567 3806-0011
SUG. RETAIL $140.95 8.95
3806-0019
CHAIN PRESS TOOL •Installs press-fit side plates on rivet-type connecting links •For use on #520 and #530 chain, including O-ring types •Complete chain press tool includes press pads •Does not rivet chain •PART #3806-0011 (sold separately) converts chain press tool to a chain breaker and riveting tool •Made in the U.S.A. DESCRIPTION Chain press tool Press pads only Breaking and riveting conversion kit
SUG. RETAIL $50.95 13.95 17.95
3806-0020
DESCRIPTION PBR chain breaker
PART # 3806-0019 3806-0020
SUG. RETAIL $128.95 27.95
SUG. RETAIL $84.95
DESCRIPTION Cutting and riveting tool Repl. pin
LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES
BRAKES
CHAIN RIVETING TOOL •Rivets chain links to form endless chain •Use on cam chain or drive chain •Can also be used to break chain •Includes four sizes of pins (pins also available separately) •Made in the U.S.A. PART # P558 P559 P560 P561 P562 P567
DESCRIPTION Chain riveting tool 2mm tip 3mm tip 4mm tip Wedge tip Repl. press plates
SUG. RETAIL $94.95 5.95 5.95 5.95 5.95 13.95
TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES
•Complete chain tool for most 520, 525 and 530 standard and O-ring chains •Break, press, and rivet your chain with one compact tool •Will rivet hollow-nose master links (will not rivet solid soft-nose pins) •Will push pin completely through link/side plate •Hardened body, riveting tip and breaker pin for strength and durability •Removable handle for compact storage •Perfect for your tool pack if you have a chain with a rivet master link DESCRIPTION Chain breaker, press and riveting tool
ENGINE
P558
CHAIN BREAKER, PRESS AND RIVETING TOOL
PART # 3806-0014
FUEL/AIR SYSTEMS
ELECTRICAL
PBR CHAIN BREAKER
PART # 3806-0016
EXHAUST
GASKETS & SEALS
•Designed to cut chain, press fit connecting links plates, and rivet pin heads with one easy to use tool •Small compact design •May be used to cut any 520, 525, 50 (530) or 532 chain •For use with D.I.D.’s ZJ rivet connecting link only •Replacement cutting pins sold separately
•PBR = press, break, rivet •Innovative design will press, break and rivet 520, 525 and 530 chains with one convenient tool •Versatile design will remove chain pins, press master-link plates and rivet hollow nose and soft nose (quad stake) master link pins on O-ring and non O-ring type chains •Easy-to-use design allows you to change tool functions by simply moving the position of the anvil block •Indexing letters on movable anvil and body ensures correct tool configuration; simply line up the letter on the anvil to the letter on the body to get the configuration you need •All components conveniently store on tool when not in use •All steel construction with heat-treated components for strength and durability •May be supported in a vise or held with included handle •Great for the professional technician or DIY mechanic •Compact and light enough to carry in a tool bag •Patent pending
SEATS & SISSY BARS
TRANSMISSION & DRIVELINE
CUTTING AND RIVETING TOOL
3806-0011
WINDSHIELDS & FAIRINGS TOURING
PART # MP08-135 3806-0010
P567
P566
21
HARDWARE, CHEMICALS & TOOLS SUG. RETAIL $72.95
All part numbers in BLUE are new for 2013.
COVERS, SECURITY & GENERAL
1463
SECTION
21
WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS
TYPE 7 CHAIN BREAKER •Advanced design handles 1/2”, 5/8” and 3/4” pitch chains with ease •Outer plates of link being disassembled are supported, allowing pin to be completely removed from the outer plate •Unlike standard chain breakers, inner links will not be inclined to bend •No special spacer or inner plate needed for use on O-ring chains PART # RG-03 RG05
RG-03
DESCRIPTION Type 7 chain breaker Repl. pins
CHAIN BREAKER •Handy addition to any toolbox or storage compartment •Chain breaker pushes pin completely through link of chain •For use with 35 to 632 size chains SUG. RETAIL $136.95 12.95
PART # RG-01
DESCRIPTION Chain breaker
SUG. RETAIL $70.95
EXHAUST FUEL/AIR SYSTEMS ENGINE
SPRING CLIP PLIERS •Pops clips on master link •Compact size for use anywhere •O-ring chain version available PART # RG-04
DESCRIPTION O-ring chain pliers
MASTER LINK PLIERS SUG. RETAIL $83.95
•Designed to install and remove clip-type master links •One tip is shorter and notched to be placed on the pin; the other tip is longer to push the clip easily PART # MP08-0230
DESCRIPTION Master link pliers
SUG.RETAIL $19.95
TRANSMISSION & DRIVELINE GASKETS & SEALS CHAIN BRUSH ELECTRICAL
LIGHTING
•Stiff bristles will remove dirt and grime from your chain •Sturdy plastic handle with removable bristles •Allows you to clean all four sides of your chain •The long bristle end can be used for cleaning other parts of your bike •Replacement bristles (four-piece set) available separately PART # 3806-0022
DESCRIPTION Chain brush
SUG. RETAIL $13.95
BELT TENSION GAUGE •Compact design •Graduated scale for easy reference •Designed to work with all belt-drive models with a 10-lb. specification PART # 3801-0003
DESCRIPTION Belt tension gauge
SUG. RETAIL $28.95
HANDLEBARS, CONTROLS & MIRRORS CABLES EXHAUST BRACKET WRENCH •To remove and install the front exhaust bracket •93/4” L; single end with reversible ratcheting action •Removable/replaceable shortened T-27 Torx bit •Low-profile design allows for easy access to the exhaust bracket in between the frame and engine •Vinyl grip protects bike from damage during use and provides an ergonomic grip
BRAKES TANKS & OIL FILTERS DASHES & GAUGES
SEAT NUT INSTALLATION TOOL •Allows you to install the rear seat nut without having to remove the rear wheel •Great time-saver PART # 3850-0203
DESCRIPTION Seat nut installation tool
SUG. RETAIL $21.95
PART # 3850-0161
DESCRIPTION For 99-13 Dyna
SUG. RETAIL $34.95
FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL
1464
SOFTAIL SEAT SCREWDRIVER •Used in combination with a 1/4” square drive ratchet and extension (if needed) to install/remove the slotted spring-loaded seat screws on H-D Softails, making seat removal a snap •Flanges keep the driver centered and prevent slipping and possible damage to the bike’s painted surface when depressing the fastener •1/4”-square drive allows variability with drive extensions to access seat screws •Zinc-plated for long life
REAR SEAT MOUNTING SCREW TOOL
PART # 3850-0162
PART # 3850-0145
DESCRIPTION For 00-13 FXST, FLST
SUG. RETAIL $28.95
•Centers on the screw head to keep from scratching or damaging rear fender or screw when installing or removing Softail rear seats •Made in the U.S.A. DESCRIPTION For 07-13 FXST/FLST that use H-D screw No. 3075
All part numbers in BLUE are new for 2013.
SUG. RETAIL $50.95
SECTION
21
WINDSHIELDS & FAIRINGS CABLE LUBER
CABLE LUBER
PART # MP08‑0182
DESCRIPTION Cable luber
TOURING
•Allows lubricant to be injected into cable housing •No need to remove cable from machine •Inject lubricant into housing until it is expelled from the other end •Single bolt design to ensure even contact on cable •Sold each
•Used to inject lubricant into cable housing •Clamps over housing and wire, allowing an aerosol can to be connected •Once lube runs out the far end, the cable is lubricated •Sold each SUG. RETAIL $9.95
PART # 1606‑0002
DESCRIPTION Cable luber
AUDIO & COMMUNICATION SUG. RETAIL $9.95
LUGGAGE SEATS & SISSY BARS
CABLE LUBER •Cable Luber allows motorcyclists to power‑inject Cable Life or any similar product into their cables in only five seconds •Cables need not be removed •Aluminum with two screws PART # •12 per case; sold each PET‑017 •Made in the U.S.A.
CABLE LUBER •High‑quality cable luber makes cable maintenance quick and easy •Sold each DESCRIPTION Cable luber
SUG. RETAIL $16.50
PART # 3850‑0157
DESCRIPTION Cable luber
EXHAUST
SUG. RETAIL $11.95
FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE
INTERNAL SNAP‑RING PLIERS •Extra long rocker box wrench with T40 bit used to remove/replace the bolt that holds the rear fender to the frame on H‑D touring models •Removes the rear fender bolt without having to remove the tire •13” overall length •Heat‑treated and chrome‑plated for durability and appearance •Made in the U.S.A.
•Allow removal of internal snap rings used in hydraulic master cylinders •Can be used to remove and replace small to medium internal snap rings up to 50mm deep, including those used for transmission gear locating, bearing retention and oil seal retention •Applicable to some fork seal retaining rings
PART # 3850‑0164
PART # 3808‑0002
REAR FENDER BOLT WRENCH
DESCRIPTION For 88‑13 Touring models
SUG. RETAIL $44.95
DESCRIPTION Internal snap‑ring pliers
SUG. RETAIL $25.95
GASKETS & SEALS ELECTRICAL
LIGHTING HANDLEBARS, CONTROLS & MIRRORS
HYDRAULIC BRAKE BLEEDER •Makes bleeding and servicing hydraulic brakes a one‑person job •Unique check valve allows fluid and air to escape while preventing air from re‑entering the system •Instructions and hose included •Will not bleed air from a dry system •Made in the U.S.A. PART # MP08‑143
DESCRIPTION Hydraulic brake bleeder
SUG. RETAIL $18.95
CABLES
BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS
MINI BLEEDER •Combines wrench and bleeder valve into one convenient and compact tool •Bleeds brake systems and hydraulic clutch systems •Internal check valve for fast easy bleeding •Anodized billet aluminum handle with chrome‑moly steel body •Compact size for tight spaces •High‑quality internal seal •Multi‑position handle
SBS BRAKE SYSTEM BLEEDER •This unique tool will allow for a quick, secure and clean brake service when changing brake fluid •Replacement O‑rings and bleed nipples available separately PART # SBS3908 SBS8993916 SBS8993917
DESCRIPTION Brake system bleeder Brake bleeder nipple Brake bleeder O‑ring
SUG. RETAIL $176.95 7.95 2.95
PART # 3808‑0010 3808‑0011 3808‑0012
All part numbers in BLUE are new for 2013.
DESCRIPTION Fits most 8mm bleeder nipples Fits most 10mm bleeder nipples Fits most 11mm bleeder nipples
SUG. RETAIL $24.95 26.95 26.95
FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL
1465
SECTION
21
WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS
BRAKE PAD DISC SPREADER
DS‑196404
3808‑0006
•Makes brake pad installation easier •Compresses the pistons and pads into the calipers •Simple one‑hand installation •Durable cast construction PART # 3808‑0007
BRAKE CALIPER PISTON REMOVER FOR OEM 4‑PISTON CALIPERS
DESCRIPTION Brake spreader
SUG. RETAIL $46.95
•Holds pistons square in their cylinder bores during removal •Prevents damage to pistons and cylinders when installing new seals and wipers •Made in the U.S.A. PART # DESCRIPTION 3808‑0006 For 08‑13 FXST/FLST, FXD 4‑piston front calipers DS‑196404 For 00‑07 Big Twin and 00‑03 XL 4‑piston front/rear calipers
SUG. RETAIL $85.95 70.95
EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS
FORK OIL LEVEL GAUGE
•Special clear plastic tube and fitting allows replacement of the oil in the fork through the drain plug without disassembling the fork and front end •For drain bolt size M8 x 1.25mm •Works great on fairing models with hard‑to‑reach fork tube nuts
•For checking and adjusting the oil level on all conventional and single‑chamber cartridge forks •Adjustable ring will measure oil levels from 0 to 300mm in 0.5cm increments •Syringe has a capacity of 60ml •Can be used on bicycles equipped with front suspension •Also replaces H‑D tool #590000‑B and Buell tool #590000‑B
PART # 3805‑0103
PART # MP08‑121
FORK OIL REPLENISHMENT KIT
DESCRIPTION Fork oil replenishment kit
SUG. RETAIL $26.95
DESCRIPTION Fork oil level gauge
SUG. RETAIL $21.95
ELECTRICAL
LIGHTING FORK OIL LEVEL KIT HANDLEBARS, CONTROLS & MIRRORS
•A rugged, accurate measuring scale to adjust fork oil height •Built‑in memory device to eliminate guesswork •Made in the U.S.A.
CABLES
PART # FOL‑1
BRAKES
FORK CAP NUT SOCKET
TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS
FORK OIL LEVEL ADJUSTMENT KIT
DESCRIPTION Fork oil level kit
SUG. RETAIL $12.95
PART # FOL‑2
•Use for removal of 13/8” hex fork cap nut •1/2” drive •Thin socket measures only 9/32” deep by 5/8” tall •O‑ring insert to help protect the top of the cap from damaging polished surfaces •Sold each •Made in the U.S.A. PART # 3805‑0013
•A fork oil level measurer and adjuster in one •Set stop to recommended height, lower into fork and reverse pump to suck oil out until level is reached •Made in the U.S.A. DESCRIPTION Fork oil level adjustment kit
SUG. RETAIL $40.95
FORK NUT SOCKET
DESCRIPTION For most Big Twin and Sportster models
SUG. RETAIL $17.95
•Used to remove and install top fork‑tube plug •Fits 41mm forks •Made in the U.S.A. PART # DS‑197025
DESCRIPTION For 84‑13 Wide Glide models
SUG. RETAIL $61.95
FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL
1466
SPRINGER FORK COMPRESSION TOOL
3/8” DRIVE 35MM SOCKET FOR TOP NUT ON FORKS
•Designed to assemble and disassemble OEM Springer forks •Facilitates the removal and installation of both the rebound and compression fork springs •Made in the U.S.A.
•Used to remove and install top fork nuts on fork tubes •Rubber protector inside socket protects chrome finish •Will clear most handlebars •Made in the U.S.A. PART # DS‑196294
DESCRIPTION For all Big Twin and XL
NOTE: Fork springs are compressed. Suddenly releasing the fork springs can result in personal injury. SUG. RETAIL $78.95
PART # DS‑197018
All part numbers in BLUE are new for 2013.
DESCRIPTION For 88‑11 OEM Springer forks
SUG. RETAIL $36.95
SECTION
21
WINDSHIELDS & FAIRINGS FORK SEAL AND CAP INSTALLER
3805-0016 3805-0015
3805-0014
FORK SPRING COMPRESSOR KITS •Designed to install fork caps on forks with a large amount of spring pre-load •Will work on most 39mm and 41mm Harley-Davidson fork applications •Made in the U.S.A. PART # 3805-0014 3805-0015 3805-0016
DESCRIPTION For 39mm forks For 41mm forks For 39 and 41mm forks
•Used to install fork and dust seals •Chrome cap installer is to be used in conjunction with PART #DS-197022 to install the OEM chrome fork slider covers on 39mm fork legs •Sold each •Made in the U.S.A. PART # DS-197021 DS-197022 DS-197023 DS-197024
TOURING
DS-197021
DESCRIPTION For 35mm forks For 39mm forks For 41mm forks Chrome cap installer for 39mm forks
SUG. RETAIL $57.95 58.95 88.95
SUG. RETAIL $70.95 70.95 70.95 69.95
PART # 3801-0106
DESCRIPTION For 06-13 Dyna Glide, 02-11 V-Rod, except inverted fork models
ADJUSTABLE SPLIT FORK SEAL DRIVER SETS •Quickly and conveniently replaces fork seals without removing inner fork tube from the T-clamp •For use with stock H-D forks made by KYB and Showa •Split-seal driver as well as 35mm, 39mm and 41mm seal guides are included PART # 35-7568
DESCRIPTION H-D fork seal driver kit
SUG. RETAIL $196.95
DESCRIPTION For HD 35mm, 39mm and 41mm fork tubes
SUG. RETAIL $478.95
FORK LEG AND TUBE HOLDER TOOL
SUG. RETAIL $74.95 74.95 74.95 74.95
PART # TFSD43 TFSD46 TFSD48 TFSD50
DESCRIPTION 43mm 45/46mm 47/48mm 49/50mm
SUG. RETAIL $74.95 74.95 74.95 74.95
TRANSMISSION & DRIVELINE GASKETS & SEALS
LIGHTING
•Innovative design makes tool easier and more secure to use than old3805-0086 fashioned pin-aligned drivers •Anodized aluminum locking ring features knurled finish for secure no-slip grip and positively locks body halves together during use •No more worrying about part of the tool falling off and damaging the fork leg or hitting your feet •Perfectly weighted to drive seals •Body halves are machined from durable carbon steel and feature high-quality protective black e-coat with laser-engraved markings •Patent pending PART # 3805-0086 3805-0088 3805-0089
DESCRIPTION 35-36mm 39mm 41mm
SUG. RETAIL $115.95
SUG. RETAIL $44.95 44.95 44.95
HANDLEBARS, CONTROLS & MIRRORS CABLES
BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS
FORK SPRING COMPRESSORS •Relieves spring pressure for taking off fork tube caps without damaging threads •Innovative design allows you to use the tool with forks on or off the bike •Simple and fast, saves money and time •Available in hand- or footoperated versions
•Holds fork legs and tubes for hands-free easy servicing or rebuilding •Mounts in vise to hold fork to 2” dia. max. firmly during repair without causing damage to fork assembly •Will not scratch finish •Made in the U.S.A. DESCRIPTION Fork leg and tube holder tool
DESCRIPTION 35mm 36-37mm 38-39mm 40/41mm
RINGER FORK SEAL DRIVERS
•To install fork tube seals in all HD 35mm, 39mm and 41mm fork tubes •Allows procedure without disassembly of the fork •Pulls the seal into place using a threaded rod preventing damage to the seal and replacing the conventional method of using a hammer to install the seal •Includes several sleeves so broad application coverage is provided •Made in the U.S.A.
PART # 3805-0032
PART # TFSD35 TFSD37 TFSD39 TFSD41
ENGINE
ELECTRICAL
FORK TUBE SEAL INSTALLER
PART # 3805-0102
FUEL/AIR SYSTEMS
•Split-fork seal drivers save headaches and seals •Fit both inverted and conventional forks
$121.95
SEATS & SISSY BARS EXHAUST
FORK SEAL DRIVERS
SUG. RETAIL
LUGGAGE
TFSD35
49MM FORK SEAL AND DUST SHIELD INSTALLER •Installs lower leg 49mm fork seals squarely into the bore without damaging the seal lip surface •Also installs dust shield cover •Two-piece design to aid in some assembly applications •Made in the U.S.A.
AUDIO & COMMUNICATION
PART # TFSC01 3805-0051
FOOTRESTS & LICENSE PLATE FRAMES 3805-0051
HARDWARE, CHEMICALS & TOOLS
TFSC01
DESCRIPTION Standard fork spring compressor Foot-operated fork spring compressor
All part numbers in BLUE are new for 2013.
WHEELS & AXLES
SUG. RETAIL $149.95 189.95
COVERS, SECURITY & GENERAL
1467
SECTION
21
WINDSHIELDS & FAIRINGS 3805-0074
TOURING
FORKTRU FORK ALIGNMENT TOOL
3805-0033
AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS EXHAUST
FRONT FORK COMPRESSOR TOOL •Tool compresses springs in cartridge-style forks when servicing or rebuilding •Can be mounted in vise for easy hands-free servicing •Also includes FLT adapter for FLT forks to eliminate direct contact with spring coil and special rod to pull up fork damper rod •Extended front fork compressor tool (PART #3805-0074) is used with PART #3805-0033 to compress front forks that are 2” undersize to 16” oversize •Made in the U.S.A. PART # DESCRIPTION 3805-0033 Front fork compressor tool 3805-0074 Extended front fork compressor tool
•Quick and easy-to-use tool for aligning front forks to ensure they are parallel from top to bottom •Knurled adjustment screws for easy setup •Proper alignment reduces stiction, enhancing fork performance •Reduces seal and bushing wear •Will work on 27mm-62mm fork legs and tubes •Works on forks that are 140mm to 220mm (5.5”-8.6”) on center •Patent pending PART # 3801-0115
SUG. RETAIL $403.95 173.95
FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS
DESCRIPTION Fork alignment tool
SUG. RETAIL $29.95
ROCKER FORK ADJUSTMENT TOOL
CARTRIDGE BLEEDING TOOL KIT •Easily threads onto the damping rod to facilitate cartridge fork bleeding when changing fork oil •Baffled to eliminate the mess normally encountered when bleeding cartridges •Kit includes adapters for 10 L x 1.0 W, 12 L x 1.0 W, 12 L x 1.25 W and 14 L x 1.0 W damping rods •Zinc-coated
•Enables technicians to perform rocker adjustment procedures on Springer forks quickly, safely and accurately •Features simple, one-person operation using a 1/2” square drive torque wrench and a 3/8” breaker bar or ratchet •Combination of 11/2” 12-point hex with 1/2” hex key allows guided alignment for ease of adjustment of rocker arm •1/2” square drive accommodates the use of a 1/2” drive torque wrench for precise tightening of fastener •Made in the U.S.A.
PART # 3805-0004
PART # 3801-0208
DESCRIPTION Cartridge bleeding tool kit
SUG. RETAIL $54.95
DESCRIPTION Rocker fork tool
SUG. RETAIL $75.95
ELECTRICAL
LIGHTING HANDLEBARS, CONTROLS & MIRRORS
SOFTAIL SHOCK PRELOAD ADJUSTER TOOL
SHOCK SPANNER WRENCH •Heavy-duty steel shock wrench enables easy adjustment of spring compression on rear shocks •Zinc-plated; sold individually PART # DS-192282
DESCRIPTION Shock spanner wrench
•Stamped steel •Makes preload adjustments much easier SUG. RETAIL $13.95
PART # DS-190733
DESCRIPTION For 89-13 FXST/FLST models; repl. OEM #94455-89
SUG. RETAIL $9.95
CABLES
BRAKES TANKS & OIL FILTERS
STAINLESS STEEL SHOCK SPANNER
FXST/FLST PRE-LOAD ADJUSTMENT TOOL
•Allows adjustment of shock preload •Compatible with majority of shock makes •Constructed of stainless steel; very strong and won’t corrode •Small enough to fit into a tool kit •Made in the U.S.A. PART # 3805-0038
DESCRIPTION Shock spanner
•For use with a 3/8” ratchet •Works on any OEM or Progressive FXST/FLST shock •Made in the U.S.A.
SUG. RETAIL $9.95
PART # SW-784
DESCRIPTION FXST/FLST pre-load adjustment tool
SUG. RETAIL $9.95
DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL
1468
PRO-SERIES LIGHT-DUTY SHOCK SPRING COMPRESSOR •Economical answer to compressing light-duty springs •Lever-action design makes shock spring compression easy, leaving one hand free to remove the spring retainer •Designed with an easy-loading wire-loop pin in the lever •Features a safety cap that swings over the spring and bolts in place to prevent the spring from accidentally slipping out of the spring plate •Made in the U.S.A. PART # 3805-0036
DESCRIPTION Light-duty shock spring compressor
SUG. RETAIL $79.95
PRO-SERIES HEAVY-DUTY SHOCK SPRING COMPRESSOR •Lever-action compressor makes shock spring compression a snap, leaving one hand free to remove the spring retainer •Features maximum adjustability for shock length, spring diameter, coil angle and compression angle •28” L handle and base for maximum leverage •Heavy-gauge construction to handle everything up to the 450-500 lb. bike shock springs •Safety cap swings over the spring and bolts in place to prevent the spring from accidentally slipping out of the spring plate •Made in the U.S.A. NOTE: It is recommended that the compressor be bolted to a solidly anchored, heavy workbench or stand due to the high spring rates it can handle. PART # 3805-0029
DESCRIPTION Heavy-duty shock spring compressor
All part numbers in BLUE are new for 2013.
SUG. RETAIL $149.95
SECTION
21
WINDSHIELDS & FAIRINGS TOURING SOFTAIL SHOCK TOOL SHOCK SPRING COMPRESSION TOOL •Saves busted knuckles when changing out the shock spring •Ideal for use at the shop or the home garage •Made in the U.S.A. PART # 3805-0067
DESCRIPTION Shock spring compression tool
PART # PS32-5507
LUGGAGE
SUG. RETAIL $81.95
SEATS & SISSY BARS EXHAUST
GP-0-30 GP-0-100
•For rear shock and front fork adjustable air suspensions; also may be used for emergency tire repairs •Fitted with a precise adjust button 2-3 psi per push •Rotary flexible hose, die-cast gauge base and ergonomic pump handle for simple operation •Twist-and-lock removable gauge allows safe, easy storage and transport; fits into a saddlebag or other storage area easily •Overall length 9”; sold each PART # 3805-0082 3805-0083
DESCRIPTION Softail shock tool
SUG. RETAIL $62.95
3805-0082
HI-PRESSURE SHOCK PUMPS
AUDIO & COMMUNICATION
•Use this tool to assemble and disassemble Progressive Suspension and stock Harley-Davidson Softail shocks •Made in the U.S.A.
DESCRIPTION Pump w/ 0-30 psi gauge Pump w/ 0-60 psi gauge
SUG. RETAIL $41.95 41.95
ENGINE GAUGE-MOUNTED SHOCK ABSORBER PUMPS
GP3-300
•Perfect for air shocks, forks and emergency tire repairs •Simple to operate and extremely accurate •Available in four styles for servicing high-pressure pneumatic systems •An exclusive let-down valve allows for minor adjustments •Check valve ensures no-leak operation •Sold individually SUG. SUG. PART # DESCRIPTION GP-0-30 Small body, 0-30 lb. GP-0-60 Small body, 0-60 lb.
3811-0068
FUEL/AIR SYSTEMS
RETAIL $49.95 49.95
PART # DESCRIPTION RETAIL GP-0-100 Small body, 0-100 lb. $49.95 GP3-300 Small body, 0-300 lb. 49.95
TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL
LIGHTING
3801-0032
HANDLEBARS, CONTROLS & MIRRORS 3801-0072
ERGO SPOKE WRENCHES •Unique combination wrench design has three-sided open end and semi-closed end •Use open end for quick adjustment of spoke nipples and semi-closed end for those hard-to-turn nipples that require more torque •Specially designed ergonomic handle allows larger turning radius and excellent grip and feel •Polished finish with laser-engraved logo and size markings •Patent pending •Sold as a set of six wrenches or 6.0mm wrench individually PART # 3811-0068 3811-0063
DESCRIPTION Set of six (5.0mm, 6.0mm, 6.3mm, 6.5mm, 6.8mm, 7.0mm) 6.0mm spoke wrench
SUG. RETAIL $72.95 12.95
3801-0031
BEARING REMOVER SETS •PART #3801-0031 eight-piece metric set includes large and small drivers, 10mm, 12mm, 15mm, 17mm, 20mm, and 25mm removers; dependable split collet design •PART #3801-0032 set includes large driver, 3/4” and 1” collets to remove radial ball bearings on Harley-Davidson and American V-Twin motorcycles PART # 3801-0032 3801-0031 3801-0072
DESCRIPTION Standard bearing remover set Metric bearing remover set 25mm remover only
SUG. RETAIL $38.95 74.95 10.95
CABLES
BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS
DS-196042
FOOTRESTS & LICENSE PLATE FRAMES WHEEL BEARING RACE TOOL 3RD HAND AXLE LOCKER TOOL •Prevents axle from moving while you are torquing down the axle nut after setting belt tension •Eliminates the need for a helper or trying to blindly hold the axle from the other side of the tire •Made in the U.S.A. PART # 3805-0070
DESCRIPTION For 02-13 FLT/FLHT models
SUG. RETAIL $61.95
•Easy-to-use race installer/remover DS-196146 tool by JIMS •Eases removal or installation of bearing cups •Use in conjunction with the handle/driver PART #DS-196042; sold separately •Made in the U.S.A. PART # DS-196146 DS-196042
DESCRIPTION Wheel bearing race tool (ea.) only for all 84-99 Big Twin, Sportster and Buell wheels Handle/driver only (ea.)
All part numbers in BLUE are new for 2013.
SUG. RETAIL $100.95 75.95
WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL
1469
SECTION
21
WINDSHIELDS & FAIRINGS TOURING 3801-0101
AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS
3811-0039
EXHAUST FUEL/AIR SYSTEMS ENGINE
25MM WHEEL BEARING INSTALLER AND PULLER ADAPTERS •Updates discontinued PART #DS-196295 (Jim’s #1042) for use with new 25mm wheel bearing found on 07-13 models •Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL 3801-0101 25mm wheel bearing/puller adapter $60.95 3811-0039 25mm wheel bearing/installer adapter 28.95
SEALED WHEEL BEARING REMOVER AND INSTALLER KIT •Removes and installs 3/4”, 1” and 25mm wheel bearing with or without ABS •Made in the U.S.A. PART # 3802-0035
DESCRIPTION For all 00-13 Twin Cam, 00-13 XL, 02-13 V-Rod
SUG. RETAIL $331.95
0365-0003
TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL
LIGHTING HANDLEBARS, CONTROLS & MIRRORS 0365-0007
CABLES
BRAKES TANKS & OIL FILTERS
WHEEL TRUEING AND WHEEL BALANCE STAND
WHEEL BALANCING STAND •Can be used to balance mounted tires or true wheels up to 12” wide •Most accurate balancing method available •Employs the same balancing method as used by most race teams •Optional adapter for Harley wheels sold separately •Made in the U.S.A. PART # 0365-0003 0365-0007
DESCRIPTION Balancing stand Harley adapter
SUG. RETAIL $157.95 33.95
•Balances and trues all 14”-21” motorcycle wheels •Wheels mount to adjustable center cones or ball bearings for trueing and static balancing •Adjustable frame rails accommodate wide rims and wheels •Measures 9.5” between cone tips, 12.5” between uprights and 12” between bearings •Constructed of lightweight steel and plated in zinc PART # 35-8621
DESCRIPTION Wheel trueing and balancing stand
SUG. RETAIL $296.95
DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL
1470
3-IN-1 TRUEING STAND •Check your cranks and fork tubes for runout; balance spoke and cast wheels •12.5” between points, 15.5” between uprights and 14” wide between bearings •Handles rims up to 21” PART # DESCRIPTION •Dial indicator gauge 35-9573 3-in-1 trueing stand sold separately
All part numbers in BLUE are new for 2013.
SUG. RETAIL $562.95
SECTION
21
WINDSHIELDS & FAIRINGS MAGNETIC BASE FOR DIAL INDICATORS
TOURING
•For use with dial indicator gauge •Features an easy-to-use on-off knob •Flexible indicator mounting arm locks into place to make any job easy PART # 3850-0014
AUDIO & COMMUNICATION
DIAL INDICATOR GAUGE •Features 21/4” face with 1” sweep in 0.001” increments PART # 35-8428 DESCRIPTION Magnetic base
SUG. RETAIL $111.95
DESCRIPTION Dial indicator gauge for 3-in-1 trueing stand 35-9573 and magnetic stand 3850-0014
SUG. RETAIL
LUGGAGE
$40.95
SEATS & SISSY BARS EXHAUST SPOKE WHEEL-WEIGHT REMOVER TOOL •Designed to allow the tech to place the split tang of the tool between the rim and the weight and tap it off the nipple with spoke wheel weight hammer PART #3811-0040 PART # 3811-0030
DESCRIPTION Spoke wheel-weight remover tool
SUG. RETAIL $25.95
•Reads 1.0” in increments of .001” •Gauge can be locked for a zero setting •Includes magnetic base stand that has an adjustable dial indicator mounting arm for a wide range of applications DESCRIPTION Dial indicator gauge
ENGINE TRANSMISSION & DRIVELINE
DIAL INDICATOR GAUGE WITH MAGNETIC BASE
PART # 3850-0013
FUEL/AIR SYSTEMS
4-WAY VALVE TOOL
SUG. RETAIL $70.95
GASKETS & SEALS
•Removes valve cores •Re-taps inside and outside threads; reams inside valve •Works on A.C. unit valves PART # 3810-0026
DESCRIPTION 4-way valve tool
ELECTRICAL
SUG. RETAIL $1.95
LIGHTING HANDLEBARS, CONTROLS & MIRRORS
SPOKE WHEEL-WEIGHT HAMMER •Special hammer for reaching behind the disc rotor when installing or removing spoke-type wheel weights PART # 3811-0040
DESCRIPTION Spoke wheel-weight hammer
TIRE VALVE STEM INSERTER
CABLES
•Simplifies the installation of valve stems in tubeless tires SUG. RETAIL $15.95
PART # 3811-0031
DESCRIPTION Tire valve stem inserter
SUG. RETAIL $19.95
BRAKES TANKS & OIL FILTERS
VALVE STEM PULLER
VALVE STEM FISHING TOOL •Used to pull valve stems and valve stems of inner tube assemblies through the valve stem hole on vehicle rims •Tool has three functions: valve stem puller, valve core removal and tire deflator •Unlike existing tools on the market, this valve stem puller threads into the valve stem rather than over the valve stem •Makes valve stem and inner tube jobs faster and easier PART # 3810-0038
DESCRIPTION Valve stem fishing tool
•Rugged tool handles any length valve in any size rim •Screws over valve threads •Quickly install snap-in valve stems by applying pulling pressure •Made in the U.S.A. PART # 0365-0002
DESCRIPTION Valve stem puller
SUG. RETAIL $18.95
DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES
SUG. RETAIL $22.95
WHEELS & AXLES 4-WAY TIRE VALVE REPAIR TOOL
PART # 3810-0032
DESCRIPTION 4-way tire valve repair tool
HARDWARE, CHEMICALS & TOOLS
VALVE CORE TOOL
•Repairs core and stem threads •Has core screwdriver and broken core extractor •Very small and compact tool
•Screwdriver handle valve core tool •For extracting and installing tire valve cores SUG. RETAIL $4.95
PART # 3810-0031
All part numbers in BLUE are new for 2013.
DESCRIPTION Valve core tool
SUG. RETAIL $6.95
COVERS, SECURITY & GENERAL
1471
SECTION
21
WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION
VALVE CORE REMOVER •Made from hex stock •Allows for easy removal and installation of standard valve cores in tubed or tubeless valve stems •This will be the most borrowed tool in the toolbox PART # MP08-0183
DESCRIPTION Valve core remover
ALUMINUM VALVE CORE TOOL •All-aluminum design with a knurled handle •Used to remove or install tire valve cores SUG. RETAIL $3.95
PART # 3810-0033
DESCRIPTION Aluminum valve core tool
SUG. RETAIL $5.95
LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS
RIM PROTECTORS
NYLON RIM SAVERS
•Protect your wheels from scratches and dings caused by tire changing tools •Include retrieval cord for easy use •Sold in pairs
•Specially formed and designed to protect alloy rims from scratching by tire levers or tools •Sold in pairs PART # DS-380311
DESCRIPTION Nylon rim savers
SUG. RETAIL $11.95
PART # 3811-0016
DESCRIPTION Rim protectors
SUG. RETAIL $9.95
ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS TIRE TAMER ELECTRICAL
LIGHTING HANDLEBARS, CONTROLS & MIRRORS
•This tool is the helper you need when changing tires •Save your knuckles, time and temper •Simple-to-use design lifts the tire bead away from the rim in one easy motion, with one hand •Makes installing tubes, valve stems and rim locks a snap, even when working alone
TY’ER IRONS •101/2” L zinc-coated steel Ty’er irons •Ergonomic handle fits your hand •Spooned end prevents tubes from pinching •Sold in pairs •Made in the U.S.A. PART # M01066
DESCRIPTION Ty’er Irons
SUG. RETAIL $29.95
P503
PART # 3810-0017
DESCRIPTION Tire Tamer
SUG. RETAIL $31.95
P530
CABLES STEEL TIRE IRONS BRAKES TANKS & OIL FILTERS DASHES & GAUGES
•81/2” steel tire irons on display card of 10 •111/2” steel tire irons skin-packed two per card •16” tire tool is made of hardened alloy steel with black finish and double compound curve to make tire service easy •Made in the U.S.A. PART # P503 P530 P519
DESCRIPTION 81/2” tire iron, card of 10 111/2” tire iron, card of two 16” tire iron
TIREPRO™ TIRE LEVER SET P519 SUG.RETAIL $4.95 (ea.) 11.95 (pr.) 15.95 (ea.)
•Forged carbon steel won’t bend or break •Spoon shape ideal for easy tire removal without pinching tubes •9” length fits into most fanny packs; includes vinyl pouch •Made in the U.S.A. PART # 3810-0001
DESCRIPTION 2-pc. tire lever set
SUG. RETAIL $14.95
FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRE BEAD BREAKER
WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL
1472
•Heavy-duty cast-iron alloy construction; 5.5 lb. •Measures 8” x 63/4” x 13/4” •Separates beads on all on-road and off-road bikes •Two hinged ears apply even pressure to the bead until it separates •Individually packaged with instructions
TIRE LEVER SET •Forged tire lever set •Features seven socket sizes •A must for trail/enduro riders •2-piece set PART # 3810-0018
DESCRIPTION Tire lever set
NOTE: Works on tire sizes up to 160. SUG. RETAIL $17.95
PART # 4000
All part numbers in BLUE are new for 2013.
DESCRIPTION Tire bead breaker
SUG. RETAIL $49.95
SECTION 0365-0040
0365-0038
21
WINDSHIELDS & FAIRINGS
0365-0052
TOURING TIRE CHANGER AND STRONGARM II
AUDIO & COMMUNICATION
•Tire changer is specifically designed for motorcycle tire changing •1.5 hp motor •Handles 6”-24” wheel diameter; 2”-10” tire width •Strongarm II helps with new generation tires like Touring and Police bikes that have extremely stiff sidewalls •Strongarm II uses air pressure to assist holding tire’s bead in the drop center of wheel, even while turntable is revolving •Strongarm II mounting system is designed to work with most popular tire machines and helps to keep tire changes a one-person job
LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE
ORDERING INFORMATION: NO PARTSNET/DRAGNET WEB ORDERS. THESE ITEMS ARE DROP SHIPPED FROM K&L. NO RETURNS. PART # 0365-0039 0365-0038 0365-0052 0365-0040
DESCRIPTION Tire changer and Strongarm II, blue Tire changer only, blue Tire changer only, red Strongarm II only, blue
SUG. RETAIL $2,229.95 1,649.95 1,649.95 588.95
E-Z GRIP AIR CHUCK TOOL
E-Z GRIP DUALHEAD AIR CHUCK
•Durable, E-Z Grip handle for comfort and a positive grip 1/4” NPT pipe-threaded end will accept airline • quick-disconnect fittings •Sealed-ball air chuck is extended 25.4mm (1”) from handle to allow access to tight areas
•Durable, E-Z Grip handle for comfort and a positive grip 1/4” NPT pipe-threaded end will accept airline • quick-disconnect fittings •Designed for use on hard-to-reach wheels
PART # 3810-0036
DESCRIPTION E-Z grip air chuck tool
SUG. RETAIL $21.95
PART # 3810-0037
DESCRIPTION E-Z grip dual-head air chuck tool
TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL
M55 TIRE GAUGE
SUG. RETAIL $31.95
•Measures tire pressure and releases air out •Soft flexible rubber hose •Easier to access those hard to reach areas •Easy to read gauge •Valve cap rotates 360° PART # 0363-0056
DESCRIPTION M55 tire gauge
LIGHTING
SUG. RETAIL $39.95
HANDLEBARS, CONTROLS & MIRRORS CABLES
BRAKES DUALLY DIAL TIRE GAUGE •10-160 psi Dually tire gauge •Features easy-reach dual foot chuck and reset button PART # 0363-0033
DESCRIPTION Dually dial tire gauge
SUG. RETAIL $16.95
TIRE AIR PRESSURE GAUGE
DIGITAL TIRE PRESSURE GAUGE
•Shock-resistant rubbercoated gauge •Records pressure until release button is pressed •0-60 psi scale •Made in the U.S.A.
•Available with a round dial with 45° chuck •Scale is measured in 1 lb. increments, from 1 to 60 lb. •Round gauges have a protective rubber housing
PART # 3810-0030
DESCRIPTION Tire air pressure gauge
TIRE PRESSURE GAUGE
PART # DS-181214
DESCRIPTION Round w/ 15” hose, 45° chuck
SUG. RETAIL $39.95
DESCRIPTION 45° chuck w/ 10” rubber hose
SUG. RETAIL
•Easy-to-read round dial, 60 psi max pressure •Straight, steel-stem chuck, 45°
•Pressure range of 0-60 psi •High-quality liquid-filled 2.5” dial gauge with protective rubber boot •Accurate to plus/minus 1.5% of maximum gauge reading •Blue anodized 6061 T-6 body with pressure-relief valve •High-pressure hose with dual swivels and brass ball-type air chuck •Made in the U.S.A.
$23.95
PART # 0363-0018
PART # 3801-0123
TIRE PRESSURE GAUGE
DESCRIPTION 45° chuck
SUG. RETAIL $14.95
All part numbers in BLUE are new for 2013.
DESCRIPTION Professional tire gauge, 0-60 psi
DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES
PROFESSIONAL TIRE PRESSURE GAUGE
•Chuck style is straight, 45° •Reads from 5 lb. to 60 lb. with a pressure release switch •Comes with a plastic case PART # DS-181213
SUG. RETAIL $71.95
TANKS & OIL FILTERS
SUG. RETAIL $92.95
WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL
1473
SECTION
21
WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS
DIGITAL TIRE PRESSURE GAUGE •High-precision: accurate to +/- 0.6 psi •0-60 psi •Precise digital readout to 0.1 psi •Continuous pressure reading, no need to reset when activating bleed valve •Four selectable scales (psi, BAR, kg/cm2, k Pa) •Large easy-to-read display with back light for low-light applications •Billet aluminum trapezoid body •High-flow push-button bleeder valve for precise pressure adjustment •18” long high-pressure hose with dual swivels and brass ball type air chuck •Rubber anti-shock protective boot •Battery powered (1,000 tests) with battery strength indicator PART # DESCRIPTION •Auto-off to extend the battery life 3801-0190 Digital tire gauge, 0-60 psi •Battery included
DT190 DIGITAL TIRE PRESSURE GAUGE •Heavy metal die-cast construction •Shock-proof rubber guard •Molded finger grips •Steel carrying clip •Large backlit display and illuminated tip •5-150 psi digital tire gauge •Displays in increments of .5 psi •Auto shut off •Digital accuracy SUG. RETAIL $188.95
PART # 3030-5038
DESCRIPTION DT190 tire pressure gauge
SUG. RETAIL $12.95
EXHAUST DIAL TIRE GAUGE WITH HOSE FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE
•Flexible 11” hose between gauge and chuck for hard-to-reach tire valves •Dual-range scales with psi and kPa or kg/cm2 are available •Polished brass bezel, stem and pressure-release valve assembly •Needle holds pressure reading until released •Push-button valve bleeds air to desired pressure •Rated 0-60 psi •Made in the U.S.A. PART # RRA60X
TIREPRO™ DIGITAL TIRE GAUGE •Compact ergonomic shape for easy pressure readings •Large display, with readings in 1/10 psi increments •Readings available in multiple scales: psi; BAR, Kpa and Kg/cm2 •Auto power off, with last-reading recall feature •Made in the U.S.A.
DESCRIPTION Dial tire gauge
SUG. RETAIL $22.95
PART # 0363-0021
GASKETS & SEALS ELECTRICAL
LIGHTING HANDLEBARS, CONTROLS & MIRRORS
DESCRIPTION Digital tire gauge
SUG. RETAIL $17.95
0364-0015
TIREPRO™ DIAL TIRE GAUGE •Round 21/2” white dial tire pressure gauge reads from 0-60 psi •Includes purge valve; gauge holds reading until valve is activated •Measures 16” L when deployed •Braided red/black/silver hose is 14” L •Metal housing covered by a rubber sleeve for easy gripping •Made in the U.S.A. PART # 0363-0012
DESCRIPTION Dial tire pressure gauge
TIRE PLUG KIT •Easy-to-use eight-piece kit •Includes T-handle tire reamer, T-handle tire plugger, five plug strings and rubber cement •Extra plugs also available PART # 0364-0015 0364-0012 0364-0014
SUG. RETAIL $19.95
DESCRIPTION Tire plug kit Tire plugs (5-pk.) Tire plugs (30-pk.)
SUG. RETAIL $7.95 2.95 7.95
CABLES
BRAKES PENCIL TIRE GAUGE TANKS & OIL FILTERS DASHES & GAUGES
•Durable stainless steel construction •Easy-to-read, four-sided nylon scale, 2-psi increments •Rated 10-75 psi •Made in the U.S.A. PART # P50SS
DESCRIPTION Pencil tire gauge
SKABS™ TIRE PATCHES •Super-sticky pre-glued patches •Adhere to tubes instantly •Includes six patches and scuffer SUG. RETAIL $3.95
PART # 0364-0017
FRAMES, SUSPENSION & FENDERS
DESCRIPTION Skabs tire patches
SUG. RETAIL $2.95
0363-0010
FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL
1474
REPLACEMENT CO2 CARTRIDGES
MINI COMPRESSOR KIT •Most compact flat tire inflation system •Fully inflates tires fast from any 12V power source •Stores easily; water/shock resistant •Includes 12V air compressor, permanent battery connection, universal connections, alligator clip, tire gauge and instructions PART # 0363-0019
DESCRIPTION Mini compressor kit
SUG. RETAIL $42.95
•16-gram cartridges in threaded and non-threaded styles •Sold in 6-packs NOTE: CO2 cartridges cannot be transported on an aircraft. PART # 0363-0010 0363-0011
All part numbers in BLUE are new for 2013.
DESCRIPTION Threaded Non-threaded
SUG. RETAIL $19.95 13.95
SECTION
21
WINDSHIELDS & FAIRINGS ULTRAFLATE PLUS TIRE INFLATOR
PROFLATE ELITE TIRE INFLATOR
NOTE: Does not work with 12g nonthreaded or BigAir cartridges.
•Trigger controlled technology for fast, easy and controllable CO2 inflation •Built in “trigger lock” prevents accidental CO2 discharge •Valve interface: screw on for Schrader valves, slip onto Presta •Cartridge compatibility: 12, 16, 20, 25 gram threaded and non-threaded CO2 and Big Air cartridges •Construction: glass reinforced nylon with brass valve internals •Weight: 72 grams
NOTE: CO2 cartridges cannot be transported on an aircraft.
NOTE: CO2 cartridges cannot be transported on an aircraft.
•Trigger-controlled technology for fast, easy and controllable CO2 inflation •Built-in dirt/water cover and built-in pressure indicator •Valve interface: EZ connect/ auto detect head automatically grips valve when inflation starts •Cartridge compatibility: 12, 16, 20, 25 gram threaded and nonthreaded CO2 cartridges •Construction: glass reinforced nylon with brass valve internals •Weight: 55 grams
SUG. PART # DESCRIPTION RETAIL 0363-0046 Proflate Elite Tire inflator $24.95
TOURING 0364-0003
STREET INFLATION KIT
•Kit contains everything needed to repair a tire or tube: CO2 cartridges, tire plugs, patches, glue, reamer and plug installation tool •Includes Monster air chuck and two 45g CO2 cartridges for portable tire or tube inflation •5” x 6.5” compact zippered storage bag fits in toolbox •Refill for Monster tire repair kit contains two 45g CO2 cartridges; 5/8” thread size for use with Monster air chuck only NOTE: CO2 cartridges cannot be transported on an aircraft.
SUG. PART # DESCRIPTION RETAIL 0363-0045 Ultraflate Plus Tire inflator $21.95
PART # 0364-0003 0363-0007
SECOND WIND MTB HYBRID INFLATOR
SUG. RETAIL $59.95 29.95
0364-0008
REPLACEMENT TIRE PLUGS AND PATCHES
SUG. RETAIL $32.95
PART # 0364-0007 0364-0008
AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE
•Replacement tire plugs, patches and glue •Packaged in poly bags •Made in the U.S.A.
NOTE: CO2 cartridges cannot be transported on an aircraft. DESCRIPTION Second Wind MTB hybrid inflator
DESCRIPTION Street tire repair kit 45g 5/8” threaded refills (pr.)
0364-0007
•Features a sleek head design •Easy-to-use integrated CO2 hand pump technology allows CO2 cartridge to be stored and remain inside during hand pumping •Light action CO2 release allows precise inflation control •Improved head design is smaller, easier to use and is compatible with Schrader and Presta valves •Compatible with 16g non-threaded (PART #0363-0011) or threaded (PART #0363-0010) CO2 cartridges •Measures 165mm L x 30mm W and weighs 107g (w/o CO2 cartridge) •Includes one 16g non-threaded CO2 cartridge •Made in the U.S.A. PART # 0363-0026
0363-0007
DESCRIPTION Durol tire plugs (10-pk.) Repl. patches/glue
GASKETS & SEALS SUG. RETAIL $5.95 2.95
ELECTRICAL
LIGHTING TIRE REPAIR KITS •Tube-type kit includes quality patches and CO2 adapter flex line •Tubeless-type kit comes with on-the-wheel patch kit, CO2 adapter flex line and repair plug insert needle •Instructions included •Made in the U.S.A.
HANDLEBARS, CONTROLS & MIRRORS TRC-2
CABLES
NOTE: CO2 cartridges cannot be transported on an aircraft. PART # TRC-2 TRCL-2
DESCRIPTION Repair kit, tube-type Repair kit, tubeless type
SUG. RETAIL $30.95 35.95
TRCL-2 PART # RC-N3
DESCRIPTION Non-threaded CO2 cartridge for TRK-2
SUG. RETAIL $6.95
BRAKES TANKS & OIL FILTERS
POWER SPAIR FLAT TIRE REPAIR KIT
22-PIECE TIRE TACKLE KIT •Everything you need to repair or patch a tire in one convenient kit •The kit includes four valve cores, one 4-way tool, four anodized valve caps, three plug repair strings, one 10-50 psi pencil gauge, one screwdriver reamer tool, one screwdriver plugger tool, five 13/8” round patches, one metal scuffer and one .41 oz. rubber cement tube
SUG. PART # DESCRIPTION RETAIL 0364-0009 22-piece tire tackle kit $15.95
DASHES & GAUGES
•Inflate a standard tire in under three minutes with this powerful 12V, 150 psi compressor •Includes a 16-foot hose with a quick-release coupler, a canvas bag for storage and an easy-to-read gauge •For quick and easy use, plug directly into your power outlet adapter •A bright LED light allows for use during night time emergencies
•Fast, easy and safe 48-piece kit includes every tool needed to effectively repair flat tires •Plugs into 12V power outlet; cord length measures 10’ •Bright LED light for use during nighttime emergencies •Works on any vehicle and is tire pressure sensor friendly; inflates a mid-size car tire in 3 minutes •Includes air compressor, rugged storage case, 24 fl. oz. Slime Tire Sealant, 10-piece tire tackle kit, 30 black plugs, T-Handle reamer and plugger, tire gauge, alligator clips, Slime decal set and instructions •Also includes a 16’ coiled air hose and adapter for inflatables
PART # DESCRIPTION SUG. RETAIL 0363-0028 Heavy-duty tire inflator $89.95
PART # 0364-0010
HEAVY-DUTY TIRE INFLATOR
All part numbers in BLUE are new for 2013.
DESCRIPTION Power Spair flat tire repair kit
SUG. RETAIL $121.95
FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL
1475
SECTION
21
WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL
LIGHTING
TUBELESS PUNCTURE PILOT KIT •Ideal for motorcycles, scooters, mowers, small tractors, golf carts and ATVs •Kit allows you to make an on-the-wheel repair to your tubeless tire and re-inflate it on the spot •Includes the Pocket Tire Plugger with 15 mushroom-shaped rubber plugs and the compact mini air compressor •Mushroom plugs measure 5/16” diameter shaft x 3/4” in length and work on all tubeless tires •Kit fits into a durable zippered canvas case that measures only 7” x 4” x 3” and weighs just 1.7 lbs •12 Volt compressor unit features built-in gauge and LED Light, 66” power cord that fits Battery Tender connectors, 12” alligator extension clips, 36” extension lighter adapter and 4” tire valve hose with sports needle and inflatable adapter
TUBELESS T-HANDLE TIRE REPAIR KIT
PART # 0363-0055
PART # 0364-0032
DESCRIPTION Tubeless puncture pilot kit
SUG. RETAIL $64.95
•Sometimes tubeless tires can sustain damage that is beyond the ability of a mushroom plug •A tear from jagged items can require the use of what is known as a string or rope plug •Kit includes 20 brown rubber reinforced inserts (each 4” long), sturdy T-handle reamer, T-handle insertion tool, tube of rubber cement, retractable razor blade, repair instructions and a durable zippered canvas bag •Kit measures 5” x 2” x 6” and weighs only 11 oz. DESCRIPTION Tubeless T-handle tire repair kit
SUG. RETAIL $17.95
SG-103
HANDLEBARS, CONTROLS & MIRRORS CABLES
SG1066
BRAKES TANKS & OIL FILTERS 0363-0006
DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL
1476
TIRE REPAIR KITS •Immediate roadside repair and reinflation of a punctured tire •Deluxe tube/tubeless kit contains a thumb buffer, rubber cement, three 11/4” round patches, two 2” round patches, one 15/8” x 3” oblong patch, five 41/2” reinforced string plugs, a split-eye needle insertion tool and a canvas zippered bag; also includes an Engine Air Pump, 5’ hose with spark plug adapters, quick-release lever that converts the motor into an air compressor, a rasp tool, valve cap/core remover, hand cleaner and towel, three patch/plugs (from the inside/out) and two 91/2” steel tire levers in a 5” x 10” zippered pouch •CO2 tube/tubeless kit contains the above patches and plugs, plus four CO2 canisters and adapter for immediate inflation; also includes rubber cement, repair tools, valve cap, replacement core, hand cleaner and towel in a zippered vinyl pouch •Engine Air Pump with adapters, 5’ hose and carrying pouch also sold separately •Replacement parts also available NOTE: CO2 cartridges cannot be transported on an aircraft. PART # SG-1031 SG1066 3002
DESCRIPTION Deluxe kit CO2 kit Patch/plugs (6-pk.) and rubber cement
SUG. RETAIL $49.95 33.95 12.95
PART # 0363-00061 3003 1
DESCRIPTION Engine Air Pump w/ adapters and hose Tire patches (6-pk.) and rubber cement
Easy access to spark plugs required for best results.
All part numbers in BLUE are new for 2013.
SUG. RETAIL $23.95 5.95
SECTION
21
WINDSHIELDS & FAIRINGS 0363-0003
0364-0001
POCKET TIRE PLUGGERS
TOURING
FOR TUBELESS TIRES •Revolutionary device easily installs mushroom-shaped rubber plugs into all tubeless tires while staying on the wheel •Plugging device drives the plug into the hole with a twist of the Allen wrench; plug then expands under pressure to fill the punctured area; a firm pull on the stem seats the mushroom head on the inner wall allowing no air to escape •Pocket Tire Plugger kit includes; plugging device, nozzle adapter, rasp tool, probe tool, retractable razor blade, Allen wrench, 15 mushroom plugs (5/16” dia. x 3/4” L stem), laminated instructions and comes in 31/2” x 71/2” zippered pouch; total weight only 12 oz. •Pocket Tire Plugger with CO2 contains all the above plus four 16-g. canisters of CO2 gas and a 4” flexible adapter with solid brass fittings for the most effective repair possible without dismounting your tubeless tire; kit comes in a 5” x 71/2” x 1” zippered pouch; total weight only 18 oz. •Made in the U.S.A.
AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS
NOTE: CO2 cartridges cannot be transported on an aircraft. PART # 0364-0001
DESCRIPTION Pocket Tire Plugger
SUG. RETAIL $33.95
PART # 0363-0003
DESCRIPTION Pocket Tire Plugger w/ CO2
SUG. RETAIL $49.95
1075
TRANSMISSION & DRIVELINE
TUBELESS TIRE PLUG GUN •”On the wheel” repair for all tubeless tires •Mechanical device installs mushroom plugs in tire •Stem expands under pressure to fill puncture while the mushroom head seats on inner wall •Kit includes plug gun, retractable blade, reamer tool and 25 plugs in a compact 6” x 9” x 1” zippered vinyl pouch •Replacement plugs also sold separately PART # 1075
DESCRIPTION Tire Plugger
ENGINE
GASKETS & SEALS
SUG. RETAIL $45.95
PART # 3075
DESCRIPTION Repl. mushroom plugs (50-pk.)
SUG. RETAIL $14.95
ELECTRICAL
LIGHTING
MINI AIR COMPRESSOR
AUTOMATIC TIRE INFLATION KIT
•Portable 12V compressor measures only 4” x 2” x 6” and weighs just 14 oz. •Features a built-in LED light and 0-120 psi gauge •4” tire valve hose; 66” power cord •12” extension alligator clips; 36” extension lighter adapter •Includes sports needle adapter, inflatable adapter, complete instructions and rugged zippered carry case
•Kit contains four canisters of CO2 and a reusable valve adapter with brass fittings •Each canister produces 8-9 lb. of pressure; generally takes all four canisters to reach 24-32 lb. of pressure, depending on the size of the tire •Can be used on a variety of vehicle tires •Made in the U.S.A. NOTE: CO2 cartridges cannot be transported on an aircraft. PART # 0363-0005
HANDLEBARS, CONTROLS & MIRRORS
DESCRIPTION Automatic tire inflation kit
SUG. RETAIL $23.95
PART # 0363-0040
DESCRIPTION Mini air compressor
SUG. RETAIL $33.95
CABLES
BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES
ALTERNATOR ROTOR REMOVER AND INSTALLATION TOOL SPOT LAMP HOLDER TOOL •Designed to ease installation of spot lamps •Keeps bolt from spinning when tightening nut •Made in the U.S.A. PART # DS-197027
DESCRIPTION Lamp holder tool
SUG. RETAIL $18.95
WHEELS & AXLES
•A must-have tool for 45A charging systems; will also work on any H-D alternator system that has threaded puller holes •Tool protects threads on sprocket shaft from damage while pulling rotor free from its magnetic hold •Made in the U.S.A. PART # DS-196287
DESCRIPTION Alternator rotor removal and installation tool
All part numbers in BLUE are new for 2013.
HARDWARE, CHEMICALS & TOOLS SUG. RETAIL $110.95
COVERS, SECURITY & GENERAL
1477
SECTION
21
WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS EXHAUST
IGNITION SWITCH CONNECTOR REMOVER TOOL •Safely removes ignition switch wiring connector •Made in the U.S.A. PART # 3807-0061
DESCRIPTION For 03-13 FLHT, FLHR, FLHX, FLTR, 02-10 V-Rod
SUG. RETAIL $115.95
IGNITION SWITCH HOUSING ALIGNMENT TOOL •Aligns ignition switch housing as retaining screws are being torqued •Also used to position switch in the correct orientation for properly activating the fork lock •Proper alignment of the switch will extend the life of the ignition switch housing •Made in the U.S.A.
•Locates on ignition switch face nut that holds switch in place, letting you remove or install switch without damage 3 • /8” drive access hole •Made in the U.S.A.
PART # 3807-0050
PART # 3807-0095
DESCRIPTION For 03-13 FLHT, FLHR, FLHX, FLTR, 02-10 V-Rod
SUG. RETAIL $90.95
IGNITION SWITCH FORK LOCK TOOL
DESCRIPTION For 06-13 Dyna models
SUG. RETAIL $49.95
FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL
LIGHTING
REMOTE START BUTTON
IGNITION TIMING TESTER
•Activates starter and rotates engine without starting •Handy for tappet adjustments, servicing and diagnosing starting and electrical issues •Includes 4’ lead cable with alligator clip for start positive post terminal and motor post negative hookups •Made in the U.S.A.
•Precisely times point-type ignitions •A switch allows for either a light or a tone at the precise time of point closure •Can also be used as a continuity tester
PART # 3804-0034
PART # LM4100
DESCRIPTION Remote start button
SUG. RETAIL $38.95
DESCRIPTION Timing tester
SUG. RETAIL $41.95
HANDLEBARS, CONTROLS & MIRRORS CABLES
BRAKES
ACU-TIMER •Locks ignition points to advanced position during tune-ups PART # SS-A
IN-LINE SPARK TESTER
DESCRIPTION For models w/ mechanical advance
SUG. RETAIL $22.95
TANKS & OIL FILTERS
•Supplies a quick, easy visual check of ignition system •Works on all ignitions systems, including distributorless ignitions PART # 3804-0033
DESCRIPTION In-line spark tester
SUG. RETAIL $30.95
DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL
1478
7-WAY CRIMPER TOOL •Black anodized finish with insulated hand grips for protection •Crimp slot on end of tool secures most ignition terminals including W type, right angle and High Tower terminals •Crimps 7mm to 8.5mm ignition wire •Works with 10- to 22-gauge solderless terminals •Made in the U.S.A.
OPEN-BARREL CRIMPER •Five-station crimper for most open-barrel terminals found on motorcycles PART # 93150
DESCRIPTION Open-barrel crimper
SUG. RETAIL $26.95
PART # 3807-0012
DESCRIPTION 7-way crimper
SUG. RETAIL $14.95
IGNITION SYSTEM TESTER •Test the integrity and strength of an ignition system •Spark gap is adjustable from 0-10mm – the larger the gap the spark will jump, the stronger the ignition system PART # •Will test the ignition systems of most motorcycles, MP08-122 watercraft, ATVs and snowmobiles
DESCRIPTION Ignition system tester
All part numbers in BLUE are new for 2013.
SUG. RETAIL $9.95
SECTION
21
WINDSHIELDS & FAIRINGS
3804-0035 DS-196299
DS-196298
TOURING AUDIO & COMMUNICATION
3804-0036
PIN AND RECEPTACLE EXTRACTORS
•Removes/installs O2 sensors without removing exhaust pipes •Made in the U.S.A.
•Handy tools for extracting molex-style pins and receptacles out of sockets •Include an instruction sheet and sold individually •Made in the U.S.A.
PART # 3804-0035 3804-0036
PART # DS-196298 DS-196299
12MM O2 SENSOR WRENCHES
DESCRIPTION For 12-13 Dyna and V-Rod models For 12-13 Softail models
SUG. RETAIL $59.95 54.95
LUGGAGE SEATS & SISSY BARS
DESCRIPTION Pin extractor Receptacle extractor
SUG. RETAIL $42.95 42.95
EXHAUST FUEL/AIR SYSTEMS ENGINE
OXYGEN SENSOR TOOLS
WIRE GAUGE SPARK PLUG GAPPING TOOL
•Remove and install oxygen sensors on fuel-injected models •Socket tool has 3/8” drive receiver or can be used with a 7/8” wrench •Socket tool will withstand up to 125 ft.-lbs. of torque •Made in the U.S.A. PART # 3807-0077 3801-0094
3801-0094
DESCRIPTION For 10-13 FLHT/FLHR/FLHX/FLTR, 11-13 FXST/ FLST/FXS, 12-13 FXD/FLD For 06 Dyna Glide and all 07-13 models (except 10-13 FLHT/FLHR/FLHX/FLTR, 11-13 FXST/FLST/FXS, 12-13 FXD/FLD)
SUG. RETAIL $32.95
47.95
•Wire-gauge-type gapping tool for precise measurement of electrode gap •Six standard sizes – 0.025”, 0.030”, 0.034”, 0.035”, 0.040”, 0.045” •Six metric sizes – 0.64mm, 0.76mm, 0.86mm, 0.89mm, 1.02mm and 1.14mm •Two electrode-adjusting tools •Compact design PART # 3807-0048
DESCRIPTION Spark plug gapping tool
TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL
SUG. RETAIL $2.95
LIGHTING HANDLEBARS, CONTROLS & MIRRORS
IGNITION POINTS FILE •Precise double-cut file pattern quickly cleans ignition points •Doubles as a light-duty PART # general-purpose file 3801-0157 •Made from high-grade steel
DESCRIPTION Ignition points file
SUG. RETAIL $3.95
BRAKES
3801-0185 5/8”
SPARK PLUG SOCKET WRENCHES
TANKS & OIL FILTERS
•Most popular size, 5/8” (16mm) spark plug socket wrenches fit most powersport applications •Perfect for applications that require a thin-wall socket to fit into the head where typical forged mechanics sockets will not fit •Choice of 4” or 5” reach for spark plugs that may be situated rather deep into the head •Sockets include a rubber grommet to hold the plug in place, and meet ANSI tolerances 3801-0183 •Uses an 11/16” (17mm) wrench to loosen or tighten the spark plug socket •Available each or in dealer 5-pack PART # 3801-0183 3801-0184
DESCRIPTION 4” reach (ea.) 4” reach (5-pk.)
SUG. RETAIL (EA.) $9.95 9.95
PART # 3801-0185 3801-0186
DESCRIPTION 5” reach (ea.) 5” reach (5-pk.)
CABLES
DASHES & GAUGES SUG. RETAIL (EA.) $9.95 9.95
FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES
3807-0062 3807-0040
WHEELS & AXLES
3807-0029
TERMINAL REMOVAL TOOLS PART # 3807-0029 3807-0040
HARDWARE, CHEMICALS & TOOLS
3807-0063
•Removes both pin and receptacles •Made in the U.S.A. DESCRIPTION For use with all Delphi terminals For use with Molex MX-150 style terminals
SUG. RETAIL $29.95 49.95
PART # 3807-0062 3807-0063
DESCRIPTION For use with female AMP terminals, rigid-style For use with male AMP terminals, slider-style
All part numbers in BLUE are new for 2013.
SUG. RETAIL $37.95 102.95
COVERS, SECURITY & GENERAL
1479
SECTION
21
WINDSHIELDS & FAIRINGS IGNITIONMATE DUO TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL
LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES
BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL
1480
•Lightning-fast ignition diagnostic tool that displays and compares the ignition parameters of two cylinders or ignition systems simultaneously – on the same engine or on two like engines •The power sport industry’s top tool for trouble-shooting problems on all ignition systems (transistor, CDI, magneto, points) •Precise and sensitive in measurement, yet robust and weather resistant •Designed to find the failed part or bad connection on the vehicle – the tool pays for itself by virtue of the time saved in tracing the problem on the vehicle before disassembly/swapping out of parts •Ignition signals are fast, high-voltage pulses of energy that can damage even a good digital multi-meter whereas the IgnitionMate has been specially designed to measure and dynamically display both primary and secondary ignition signals on bright LED bar graph displays •Allows direct comparisons of secondary coil voltage, secondary spark current, primary coil voltage/current, ignition peak voltage pulses, in-cylinder spark stability and intensity, or primary circuit voltages •Dual low-tension leads and high-tension leads •The instrument is powered by an internal rechargeable 1.5Ah NiMH battery; recharge the battery with any 12VDC source, such as a vehicle PART # battery or 12VDC adapter 3807-0052 •Battery switches off after two minutes of no activity to conserve power 3807-0079 •Includes carrying case and necessary cable accessories
3807-0052 DESCRIPTION IgnitionMate Duo Repl. backprobe set
SUG. RETAIL $688.95 11.95
IGNITIONMATE •Compact dual-display peak-voltage ignition tester that makes troubleshooting all types of spark ignition systems easier, surer and quicker •Ignition signals can damage even a good digital multimeter – IgnitionMate is specially designed to measure and dynamically display both primary and secondary ignition signals on bright LED bargraph displays •The power sport industry’s top tool for trouble-shooting problems on all ignition systems (transistor, CDI, magneto, points) •No disassembling of ignition components are required – this avoids accidentally introducing, or correcting, poor contacts in the system, which may further confuse and delay resolution of the unidentified problems •Spark scale to measure the consistency of the high voltage current signal and to determine misfires. The signal strength can be varied for display purposes. Spark strength of different cylinders can be compared •The dual displays allow simultaneous measurement of two different ignition signals. This allows you to narrow down between which two points the problem lies •The instrument is powered by an internal rechargeable 1.5Ah NiMH battery that provides 6 hours autonomy. Recharge the battery with any 12VDC source, such as a vehicle battery or 12VDC adapter •The standard kit includes the instrument with rugged rubberized protective and mounting holster, combination spark cable caliper pick-up with silicon lead, stick-coil adapter, silicon test lead set with insulated crocodile clips and Probulator back probes, 12VDC 2-meter (61/2’) power lead and instruction manual & quick reference guide all packed in a custom carry case PART # 3807-0187
DESCRIPTION IgnitionMate
SUG. RETAIL $553.95
TWIN SCAN II •Provides diagnostic capabilities not found in other available tools •Useful for diagnosing hard-to-find intermittent trouble codes •Motorcycle can be operated while unit is installed •Reads and clears diagnostic trouble codes from ECU (engine control unit), TSSM (turn signal/security module), speedometer and tach •Real-time display of engine data on instrument panel-type display •Built-in data logging; stores up to one hour of data; automatically triggers when a trouble code is set and shows data before and after code is set •Includes two analog inputs for air/fuel ratio (AFR) •Interfaces to a laptop PC; minimum PC requirements are 300MHz Pentium running Windows ME/XP with SVGA display (1024 x 768 pixels) and available USB port •Includes USB cable and software on CD-ROM •Made in the U.S.A. PART # 3807-0020
DESCRIPTION For 01-13 models including V-Rod and 08-13 Touring Models w/ 36-pin Delphi fuel-injection system (except 11-13 Softail and 12-13 Dyna models) and 03-06 carbureted models w/ 12-pin ignition module
SUG. RETAIL $268.95
TWIN SCAN II+ KIT •Ideal tuning aid for the Screamin’ Eagle® race tuner (SERT) and DynoJet Power Commander and Twin-Tuner •Displays front and rear cylinder air/fuel ratio (AFR) and the required volumetric efficiency (VE) correction (in percent) with the same RPM rows and throttle position sensor (TPS) columns used in the SERT tables •Includes all features of the standard Twin Scan II •Sold as a complete kit including the WEGO3D dual-channel wide-band exhaust gas oxygen sensor interface for logging AFR data along with engine data •New version 3.0 or higher software can directly export calculated fuel correction data to Twin Tuner data files •Kit also includes two Bosch LSU 4.2 wide-band oxygen sensors, two 18 x 1.5mm weld nuts, two 18 x 1.5mm hex socket plugs, USB cable and 3.0 or higher software on a CD-ROM •When the WEGO3D is connected, the Twin Scan II+ will log PART # engine data along with the actual air/fuel ratio 3807-0021 •Made in the U.S.A.
DESCRIPTION Twin Scan II+ kit
All part numbers in BLUE are new for 2013.
SUG. RETAIL $595.95
SECTION
21
WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION
TWIN SCAN 3+ •Ideal tuning aid for Screamin’ Eagle® Pro Super Tuner (SEST), Dynojet® Power Commander® (PC), and Daytona Twin Tec Twin Tuner. Twin Scan software analyzes logged data and displays front and rear cylinder air/ fuel ratio (AFR) and the required volumetric efficiency (VE) correction (in percent) with the same RPM rows and throttle position sensor (TPS) columns used in fuel tables for the supported engine tuning systems •Includes all features of the standard Twin Scan 3 •Sold as a complete kit including the WEGO IIID dual channel wide-band exhaust gas oxygen sensor Interface for logging AFR data along with engine data •When the WEGO IIID is connected, the Twin Scan 3 will log engine data along with the actual air/fuel ratio (AFR). Logged AFR data can be analyzed and displayed •You can also display and print out the required volumetric efficiency (VE) correction (in percent) based on the AFR command •You can add data from an unlimited number of files that you previously saved; the data will be analyzed and incorporated into the table. Cells that vary more than ±0.5 AFR from the target value are shaded blue for rich or red for lean •You can then copy and paste the corrections into the software for the supported engine tuning systems; when used with the Twin Tuner, corrections are directly exported to the Twin Tuner file •Kit includes Twin Scan 3, WEGO IIID Interface, two Bosch LSU 4.2 wide-band oxygen sensors, two 18 x 1.5 mm weld nuts, two 18 x 1.5 mm hex socket plugs, USB cable and software on CDROM •Made in the U.S.A.
LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS
NOTE: Models equipped with 12mm oxygen sensors will require 18mm weld nuts be installed in the exhaust system for use with the Twin Scan 3+ kit’s 18mm oxygen sensors. PART # 3807-0130
DESCRIPTION Twin Scan 3+ for 11-13 Softail and 12-13 Dyna models (CAN-bus systems)
SUG. RETAIL $595.95
ELECTRICAL
LIGHTING
3807-0189 3807-0129
HANDLEBARS, CONTROLS & MIRRORS CABLES
BRAKES TWIN SCAN 3 •New low-cost scan tool for 11-13 models with CAN-bus (use the Twin Scan II for 01-13 models with J1850 bus) •Uses Windows XP/Vista/7 PCs for display •Reads and clears diagnostic trouble codes from ECU, BCM, ABS, speedo and tach •Real-time display of engine data on instrument panel-type display •Built-in data logging; stores one hour of data •Triggers when trouble code is set and shows data before and after data is set •Includes two analog inputs with 0-20V or ±200V range; TwinScan 3 features two-channel scopemeter capability for waveform display •Analog inputs can also be used for air/flow ratio (AFR) •Made in the U.S.A.
TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES
3807-0188
NOTE: Models equipped with 12mm oxygen sensors will require 18mm weld nuts be installed in the exhaust system for use with the Twin Scan 3+ upgrade kit’s 18mm oxygen sensors. PART # DESCRIPTION TWIN SCAN 3 3807-0129 For 11-13 Softail and 12-13 Dyna models w/ CAN data bus (includes USB cable and software on CD ROM) TWIN SCAN 3 PROBE KIT 3807-0189 For use with Twin Scan 3 scopemeter feature (includes two insulation-piercing probes and 12V power adapters for general purpose use) TWIN SCAN 3+ UPGRADE KIT 3807-0188 For use with 3807-0129 (includes WEGO IIID interface, two Bosch LSU 4.2 wide-band oxygen sensors, two 18 x 1.5 mm weld nuts and two 18 x 1.5 mm hex socket plugs)
All part numbers in BLUE are new for 2013.
SUG. RETAIL $269.95
79.95
439.95
WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL
1481
SECTION
21
WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS TWIN SCAN COMPLETE KIT EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL
•Includes both a Twin Scan II ABS unit for 01-13 models with J1850 data bus and a Twin Scan 3 ABS unit for 11-13 models with CAN data bus •Uses Windows XP/Vista/7 PCs for display •Reads and clears diagnostic trouble codes from ECU, BCM, ABS, speedo and tach •Real-time display of engine data on instrument panel-type display •Built-in data logging; stores one hour of data •Triggers when trouble code is set and shows data before and after data is set •Includes two analog inputs with 0-20V or ±200V range; TwinScan 3 features two-channel scopemeter capability for waveform display •Analog inputs can also be used for air/flow ratio (AFR) •Complete kit includes WEGO IIID Interface, two Bosch LSU 4.2 wide-band oxygen sensors, two 18 x 1.5 mm weld nuts, two 18 x 1.5 mm hex socket plugs, USB cable, probe kit, and software on CD ROM) •Made in the U.S.A. PART # 1020-1897
DESCRIPTION Twin Scan Complete Kit
SUG. RETAIL $859.95
LIGHTING 1022-0054
HANDLEBARS, CONTROLS & MIRRORS CABLES
BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL
1482
WEGO III WIDE-BAND AFR (AIR/FUEL RATIO) MONITORING SYSTEM •Complete fuel/air ratio metering system with built-in data logging •Versatile tuning aid for all carbureted and fuel-injected engines displays AFR (air/fuel ratio) and logs over two hours data including AFR, engine rpm and a spare 0-5V analog input for sensors such as throttle position or manifold pressure •Can be used for on-road or dyno testing; suitable for automotive, motorcycle and other small engine applications •Highly accurate with less than +/-0.10 AFR error over 10.3-19.5 AFR range •Easy free-air calibration procedure corrects for sensor aging effects •0-5V analog AFR output for interface to dyno instrumentation •Waterproof ultra-bright daylight-readable blue LED display with automatic dimming under low-light conditions •Wide supply voltage range from 11-16V allows operation from battery on small engines and race vehicles without an alternator; current drain is approximately 1 amp •Compact size: 4” L x 2” W x .5” H •WEGO III data logging software runs under Windows ME/XP/Vista. The software allows AFR, engine rpm and analog sensor data with user-defined scaling. Data can also be exported to Excel for further analysis •Sold in a system that includes WEGO III Wide-Band Exhaust Gas Oxygen Sensor Interface, 42” harness, Bosch LSU 4.2 five-wire wide-band oxygen sensor, 18x1.5mm weld nut for mounting sensor on exhaust pipe and software on CD ROM •Made in the U.S.A. PART # 1022-0054 7806-1563 1861-0831 7806-1564 1861-0833 1861-0832
DESCRIPTION WEGO III Wide-Band AFR Metering System Repl. 18 x 1.5mm weld nut 18 x 1.5 mm stainless steel weld nut 18 x 1.5mm hex socket plug (for plugging weld nut hole) 18 x 1.5mm stainless steel hex socket plug (for plugging weld nut hole) 12 x 1.25mm hex socket plug
All part numbers in BLUE are new for 2013.
SUG. RETAIL $459.95 5.95 8.95 5.95 8.95 5.95
SECTION
21
WINDSHIELDS & FAIRINGS DRAG SPECIALTIES 1.25A BATTERY CHARGER
TOURING
•Constantly monitors the battery preventing overcharging or boiling dry •Voltage output compensates for temperature changes, providing additional protection •Charges battery quickly to 14.2VDC •After full charge is reached, unit converts to float charger and monitors battery at 13.2V •Comes complete with fused quick-disconnect rings and a weather cover PART # 3807-0005
AUDIO & COMMUNICATION LUGGAGE
DESCRIPTION 1.25A battery charger
SUG. RETAIL $68.95
SEATS & SISSY BARS EXHAUST
DRAG SPECIALTIES 750mA BATTERY CHARGER •Make sure battery is always ready to go with this 750mA trickle charger •This charger is perfect for your maintenance-free and even gel cell batteries •It’s fully automatic and spark-proof for safety •The 12V model brings your battery to a full 14.4VDC, then maintains a float stage at 13.2V; if voltage drops below 12.6VDC full charge is resumed until battery is back to 14.4VDC •Polarity protected •LED charge mode indicator •Quick-connect harness and a 12’ output cord
FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE
PART # 3807-0004
DESCRIPTION 750mA battery charger
SUG. RETAIL $34.95
GASKETS & SEALS ELECTRICAL
LIGHTING HANDLEBARS, CONTROLS & MIRRORS 10-BANK BATTERY MAINTAINER
CABLES
•Ideal for any 12V conventional, maintenance-free, AGM, SLA and gel batteries •Features a 5-Stage charge system: pre-qualification battery test stage, constant current bulk charge stage, constant voltage stage, maintenance/float charge and recycle charge stage •Includes built-in timer for battery protection PART # 3807-0073
BRAKES
DESCRIPTION 10-bank battery maintainer
SUG. RETAIL $413.95
TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES
6/12V BATTERY CHARGER •Commercial-grade battery charger provides 20V for improving the recovery of sulfated batteries •4A output charging current •Switches from “Normal Mode” for smaller batteries, initial activation or deeply discharged batteries to “Fast Mode” for quick vehicle set-up •Reverse polarity protected •Suitable for all battery types
•Has the ability to charge both 6V and 12V batteries •28-day charge recycle re-evaluates battery condition for long-term storage •Provides up to 16V for recovery of sulfated batteries during prequalification stage •Reverse polarity protected •Easy, error-proof operation; designed to prevent overcharging •Charger ring connector PART #YUA00ACC04, SUG. RETAIL $5.95, available separately
PART # 3807-0018
PART # 3807-0046
AUTOMATIC HIGH-VOLTAGE BATTERY CHARGER
DESCRIPTION High-voltage battery charger
SUG. RETAIL $244.95
All part numbers in BLUE are new for 2013.
DESCRIPTION 1.5A 6/12V battery charger
SUG. RETAIL $59.95
WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL
1483
SECTION
21
WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS
YUASA AUTOMATIC 12V 900mA BATTERY CHARGER •Pure charging power from the people who make the batteries •Better than wall plug chargers •Fully charges battery automatically; maintains full charge indefinitely •Spark-proof and reverse polarity protected •Features three LED indicators, a ring terminal and a clip-type quick connect cord •Charger ring connector PART #YUA00ACC04, SUG. RETAIL $5.95, available separately PART # YU-20
DESCRIPTION Yuasa 900mA 12V charger
BATTERY CHARGER FUSED RING CONNECTORS •Simple, quick connection •Use with Yuasa’s 1.5A and 900mA chargers for applications including motorcycles, ATVs, snowmobiles, PWC, automobiles and riding mowers SUG. RETAIL $35.95
PART # YUA00ACC04
DESCRIPTION Fused ring connectors
SUG. RETAIL $5.95
EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL
LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES
BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL
1484
SHOP CHARGER •Fully automatic 12V, 5A, three-step shop charger •Withstands an indefinite output short circuit without sustaining any damage •Won’t sustain any damage or cause a visible spark when connected with polarity reversed to a battery of proper voltage •Charges any size lead-acid battery •Needs no fuses •Advanced, microchip circuitry •Charges and maintains battery PART # at full charge •Lightweight; weighs only 21 oz. 220114
022-0148
4-BANK BATTERY TENDER® CHARGING STATION DESCRIPTION Shop charger
SUG. RETAIL $136.95
TWO-BANK BATTERY TENDER® CHARGER •Provides 12V-1.25A per channel •Features a four-step microprocessor-controlled fully automatic charge program •Protects against sparks, short circuits and reverse polarity while also protecting marginal batteries with a 72-hour safety timer •Optional Battery Tender storage pouch for safe and easy storage or transportation is available separately; see page 1485 for PART #s 3807-0074 or 3807-0075 PART # 3807-0019
DESCRIPTION Two-bank battery charger
•This charging station from Deltran will operate anywhere in the world due to its voltage range of 100-240V •The four independent charging stations feature 12V-1.25A per station •Also features microprocessor-controlled constant-current charging, reverse polarity protection and is spark-proof •Perfect for all AGM (Absorbed Glass Matte), gel, sealed maintenance-free and flooded batteries •Complies with all international safety standards; UL/CSA/CE •Optional Battery Tender storage pouch for safe and easy storage or transportation is available separately; see page 1485 for PART #s 3807-0074 or 3807-0075 PART # 022-0148 0810-0696
DESCRIPTION Four-bank charging station Repl. snap cord, fused w/ black cover
SUG. RETAIL $276.95 8.95
SUG. RETAIL $135.95
0210128
BATTERY TENDER® PLUS
PORTABLE POWER BATTERY TENDER® •12V 5.0A or 2.5A battery charger featuring bi-level DC output •Safely charges and monitors maintenance-free AGM batteries two to four times faster than the Battery Tender Plus •Bi-level power feature is safe to use when plugged into current 3A fused ring terminals •5A charging only when provided three-wire ring terminals are used •Four-step fully automatic constant-current charging program: initialization, bulk, absorption and float/maintenance •Spark-proof and reverse polarity protected •Temperature compensation ensures proper charging even in extreme weather PART # 3807-0003
DESCRIPTION Portable Power Battery Tender
SUG. RETAIL $153.95
•Constantly monitors the battery without the damaging effects of trickle chargers; a trickle charger will eventually boil dry or overcharge a battery •Battery Tender Plus’ voltage output compensates for temperature changes, providing additional protection •Initial charge brings battery to full charge at approximately 14.2V •After full charge is reached, converts to float charger and monitors battery at 13.2V •Although a constant charge is being applied to the battery, there is little or no current (approximately 10mA) •Periodic maintenance is recommended, but Battery Tender can monitor a battery for years without the fear of boiling or destroying the battery •12V Battery Tender Plus has fused quick-disconnect rings with a weather cover PART # 0210128 021-0144 0810-0696
DESCRIPTION Battery Tender Plus, 12V/1.25A Battery Tender Plus, 6V/1.25A Repl. snap cord, fused w/ black cover
All part numbers in BLUE are new for 2013.
SUG. RETAIL $69.95 69.95 8.95
SECTION 0210114
21
WINDSHIELDS & FAIRINGS TOURING 0210115
BATTERY MANAGEMENT SYSTEM
•Deltran’s advanced SuperSmart Battery Tender Battery Management System is designed to charge and/or maintain up to 5 or 10 12V batteries simultaneously •Advanced microchip circuitry won’t activate the output until the clips are correctly connected to a battery; clips can be clamped to each other without danger •Keeps batteries fully charged for months if necessary with absolutely no danger of overheating or overcharging •It is recommended that fluid level be checked periodically during long charging periods •The Battery Tender at 2A will charge as fast or faster than any 5A charger on the market ®
PART # 0210114 0210115 08101146
®
DESCRIPTION 10 battery 12V charger 5 battery 12V charger 6’ repl. lead wire, standard
SUG. RETAIL $752.95 602.95 14.95
INTERNATIONAL BATTERY TENDER® PLUS •12V-1.25A battery charger programmed to monitor the new sealed maintenance-free AGM (Absorbed Glass Matte) batteries •Input voltage range of 100-240V allows this to operate anywhere in the world •High-frequency design allows for cooler and more efficient operation •Four-step, fully automatic and constantly charging: initialization, bulk, absorption and float/maintenance •After full charge is reached, converts to float charger and monitors battery at 13.2V •New and improved temperature compensation sensor adjusts voltage for extreme heat or cold •Water resistant, lightweight and compact •Accessory pouch included; repl. pouch also available separately; see below PART # 022-0139DLWH
DESCRIPTION International Battery Tender Plus
SUG. RETAIL $78.95
AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS
BATTERY TENDER® JUNIOR •Fully automatic two-stage lead-acid battery charger •Lightweight, compact size is ideal for those hard-to-reach spots •Trickle charger ensures batteries are maintained after charging and always ready to go •Ideal for all lead-acid, sealed maintenance-free and gel cell batteries 0210123 •On 12V models after full 14.4VDC charge is reached, converts to float charger and monitors battery at 13.2V; when voltage drops below 12.6VDC, charger resumes charging back to 14.4VDC •On 6V models after full 7.2VDC charge is reached, converts to float charger and monitors battery at 6.6V; when voltage drops below 6.3VDC, charger resumes charging back to 7.2VDC •Two-color LED indicator •Spark-proof •Reverse-polarity protected •12’ output cord and quick-connect harness •Optional Battery Tender storage pouch for safe and easy storage or transportation is available separately; see below for PART #500-0017X PART # 0210123
DESCRIPTION 12V
SUG. RETAIL $35.95
PART # 0210127
DESCRIPTION 6V
SUG. RETAIL $35.95
PART # 3807-0096 3807-0097 3807-0098
•12V/800mA charger is 100% waterproof, lightweight and compact •Three-step constant current charge program with SuperSmart™ technology •Spark-proof •Short circuit and reverse polarity protected •Weighs just 1 lb. PART # 022-0150-DL-WH
DESCRIPTION Waterproof Battery Tender Junior
SUG. RETAIL
SOLAR CONTROLLER
DESCRIPTION Solar controller
SUG. RETAIL $28.95
•For use with multiple batteries •Black quick-disconnect design •Feature 7.5A fuse •18” long •Jug contains 25 harnesses; sold each
3807-0097
PART # 3807-0047
3807-0098
DESCRIPTION Ring terminal harness
SUG. RETAIL $7.95 (ea.)
UTILITY ZIPPER POUCHES
3807-0053
SNAP CORD EXTENSION CABLE •An easy way to get from your battery to your Battery Tender® •Extends your range of charging from 12’ (normal cable leads) by another 12’ or 25’ PART # 3807-0053 3807-0054 081-0148-25
DESCRIPTION SUG. RETAIL 12.5’ extension cable (ea.) $10.95 12.5’ extension cable (4-pk.) 35.95 25’ extension cable (ea.) 17.95
•Great for charging cell phones, GPS systems and other accessories •Plugs directly into the Battery Tender ring terminal harness wired to the battery •Convenient quick-disconnect plug •Cord measures 5’ long PART # DESCRIPTION SUG. RETAIL 2130-0056 Female cigarette plug adapter $10.95
•Meet your storage needs with one of these handy pouches •Small pouch is perfect for the Battery Tender® Junior, Waterproof Battery Tender® Junior, Battery Tender® Plus or International Battery Tender® Plus •Medium and large pouches are perfect for the TwoBank or Four-Bank Battery Tender® chargers or accessories PART # 500-0017X 3807-0074 3807-0075
All part numbers in BLUE are new for 2013.
DESCRIPTION Small; 4” x 6” Medium; 6” x 8” Large; 10” x 12”
CABLES
BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS
500-0017X
FEMALE CIGARETTE PLUG ADAPTER
ELECTRICAL
HANDLEBARS, CONTROLS & MIRRORS
•Convert an existing solar panel into a solar charger using Battery Tender’s patented Super Smart Charging Algorithm •Usable input range between 5-45 watts
3807-0096
SUG. RETAIL $79.95 115.95 154.95
GASKETS & SEALS
$52.95
JUG OF RING TERMINAL HARNESSES
DESCRIPTION 5W (16” W x 13.25” H x 1” D) 10W (16” W x 26” H x 1” D) 15W (16” W x 38” H x 1” D)
TRANSMISSION & DRIVELINE
LIGHTING
PART # 3807-0099
SOLAR CHARGER PANELS •Feature Battery Tender’s 3-Step Charging Technology •Reverse-polarity protected •Temperature compensation sensor •Waterproof •Include a built-in charge controller
ENGINE WATERPROOF BATTERY TENDER® JUNIOR
SUG. RETAIL $7.95 8.95 9.95
FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL
1485
SECTION
21
WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS
OPTIMATE3+
OPTIMATE 4 DUAL PROGRAM
DESULFATING MAINTAINER/ CHARGER •Diagnoses, recovers, charges, checks and maintains batteries safely for months •Advanced, fully automatic battery charger and maintainer for all 12V lead-acid batteries from 2.5 to 28A hours capacity •This includes sealed and conventional batteries for motorcycles and similar vehicles, including dry-charged MF, sealed wet maintenance-free types, AGM and sealed deep-cycle gel batteries •Features vent-free enclosure, SAE weatherproof connectors and includes wall mounts •Unique diagnostic function automatically identifies deeply discharged (sulphated) batteries and applies a controlled high voltage with small fixed current for a limited period to recover them •Includes two detachable, interchangeable battery connectors: a connector with eyelets for permanent connection and battery clips for bench charging PART # 3807-0049
DESCRIPTION OptiMate3+ battery charger
ENGINE
PRO-S AMPMATIC
TRANSMISSION & DRIVELINE
BATTERY INITIALIZING SHOP CHARGER, DESULFATOR AND MAINTAINER
GASKETS & SEALS ELECTRICAL
LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES
BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL
1486
SUG. RETAIL $59.95
•The OptiMate 4 saves neglected, deep-discharged batteries that other smart chargers can’t •Ideal for all AGM, GEL and standard filler cap batteries from 3 to 50aH •IP64 weatherproof sealed enclosure with built-in mounting option •Now compatible with either conventional or CAN-bus motorcycle electrical systems •Control panel with 10 LEDs displays all vital battery information •Cable bushings avoid insulation stress in ultra-cold temperatures •SAE weatherproof connections •Provides optimal maintenance of your battery during long-term storage, achieved by its gentle maintenance cycle which automatically allows the battery to rest for 30 minutes of each hour of the maintenance cycle while it remains connected •Includes fused eyelet connector for permanent mounting and battery clip set for bench charging PART # 3807-0100
DESCRIPTION Optimate 4
SUG. RETAIL $74.95
ACCUMATE PRO 5 BATTERY CHARGER/ MAINTAINER
•A shop charger that initializes all sealed and filler cap batteries in one hour or less and also desulfates and recovers neglected batteries •For all 12V batteries •Simply decide between a NEW or USED battery selection •Select NEW and battery receives the correct initialization charge •The USED program allows optional selection between three sizes of battery (1, 2 or 4 amp) and the rest is automatically done for you •The high voltage and pulsing recovery mode is able to save a neglected sulfated 12V lead-acid battery unable to accept charge from a standard charger •Battery power is optimized during bulk, absorption and cell balancing charge modes by the microprocessor-controlled AMPMATIC program, a unique feature that automatically ensures the battery receives optimal current every second, and then tests to verify charge retention •Automatic safety features include quick identification of a severely shorted battery, 12-hour maximum program for used batteries and electronic reverse polarity protection PART # 3807-0055
WEATHERPROOF DESULFATING BATTERY CHARGER/MAINTAINER
DESCRIPTION Pro-S Ampmatic
SUG. RETAIL $199.95
•Manage your battery stock more effectively •Ensure that every battery will stay sold, by properly charging it before you sell it •Avoid problems caused by gradual discharge of batteries in showroom or stored vehicles •Charges and maintains up to five batteries simultaneously and independently •”IUoU” three-step charging; 1.8A constant current main charging stage •Two or more charging stations can be connected to the same battery when faster charging of larger capacity batteries is required •Integral electronic protections against short circuits at the clamps and wrong polarity connections; spark suppression system; no fuses to burn •Includes four clips for easy wall mounting NOTE: Not recommended for initializing new batteries.
OPTIMATE™ LITHIUM •OptiMate™ lithium, the first OptiMate to protect your LiFePO4 battery in a way no other charger has •Will protect your investment and keep your Lithium Iron Phosphate (LiFePO4 / LFP) battery performing as advertised for a very long time •With 5 Amps of charge current available OptiMate lithium unique multi-step ampmatic™ program recharges and balances cells within the battery quickly and efficiently •OptiMate lithium’s maintenance program delivers current to the vehicle circuitry, protecting and keeping the battery at 100% charge •Tests and displays battery condition before charging •Voltage retention test is conducted for 30 minutes during which no charge current is delivered, and provides results indicating the battery’s general state of health •The 12-hour MAINTENANCE CHARGE CYCLE consists of 30-minute float charge periods at a voltage of 13.6V followed by and alternating with a 30 minute “rest” (no charge current) periods •During the float charge period current is delivered only if the battery has lost charge due to connected vehicle circuitry; a refresh cycle may be performed if the charge level has dropped significantly •Charge progress is tracked against the ideal LiFePO4 charge curve, internal damage will be detected and unnecessary charging is prevented of a battery that cannot be recovered •Includes permanent ringlet connector with weatherproof cap and a set of battery clips
PART # 3807-0031
PART # 3807-0138
PART # 3807-0137
DESCRIPTION OptiMate™ Lithium
SUG. RETAIL $119.95
DESCRIPTION Accumate Pro 5
SUG. RETAIL $284.95
OPTIMATE 6 •OptiMate 6 with 0-4.5Amps charging power is the ideal all-in-one tool to care for all 12V batteries •Will diagnose, recover, charge, test and maintain your batteries automatically •The ampmatic™ microprocessor actively adjusts charge current to match battery characteristics to achieve a complete charge in the shortest possible time •Features a short circuit/dead cell check that detects internal damage in a battery and prevents unnecessary charging of a battery that cannot be recovered •Weatherproof, sealed enclosure •Recommended for STD (with removable filler caps), sealed AGM (absorbed glass mat) and sealed GEL 12V lead-acid batteries from 8Ah to 120Ah •Will safely maintain the battery at 100%, never overcharging, thanks to its unique 30 minute charge/30 minute rest cycle during every hour of long term maintenance charge •Includes permanent ringlet connector with weatherproof cap and a set of battery clips •Fully automatic operation that includes all safety features such as reverse polarity protection, no-spark connection
All part numbers in BLUE are new for 2013.
DESCRIPTION OptiMate™ 6 charger
SUG. RETAIL $119.95
SECTION
WINDSHIELDS & FAIRINGS
OPTIMATE 5
OPTIMATE 2
•OptiMate 5 with 2.8Amps is the ideal all-in-one tool to care for medium to large 12V batteries •In a weatherproof, sealed enclosure that includes wallmounts, the OptiMate 5 will diagnose, recover, charge, test and maintain your batteries automatically •Recommended for STD (with removable filler caps), sealed AGM (absorbed glass mat) and sealed GEL 12V leadacid batteries from 8Ah to 120Ah •Will safely maintain the battery at 100%, never overcharging, thanks to its unique 30 minute charge/30 minute rest cycle during every hour of long term maintenance charge •Includes permanent ringlet connector with weatherproof cap and a set of battery clips •Fully automatic operation that includes all safety features such as reverse polarity protection, no spark connection
•The OptiMate 2 smart charger-maintainer is a costeffective solution for long term maintenance of 12V batteries in any vehicle that is stored in or outdoors •Weatherproof and very easy to use, simply connect to the battery and plug it into the nearest power socket, the rest is fully automatic •With 0.8A constant current OptiMate 2 automatically brings the battery to full charge and then switches to the unique OptiMate battery-saving maintenance charge mode to keep the battery at 100% ready and at the same time provides power to the on board computer, display or antitheft alarm •Recommended for STD (with removable filler caps), sealed AGM (absorbed glass mat) and sealed GEL 12V lead-acid batteries up to 50Ah •Weighs in at 1 lb. •Includes permanent ringlet connector with weatherproof cap and a set of battery clips •Fully automatic operation that includes all safety features such as reverse polarity protection, no spark connection; approved to UL and CSA safety standards for automatic battery chargers
PART # 3807-0136
PART # 3807-0135
DESCRIPTION OptiMate™ 5 charger
SUG. RETAIL $89.95
DESCRIPTION OptiMate™ 2 charger
•Desulfate, recover, charge, test and maintain up to eight batteries simultaneously •Ideal for maintaining 6V and 12V batteries in the off-season •Each bank/station operates independently and delivers 1.2Amps constant current •Good for all batteries – standard, gel and AGM(MF) •Automatic detection and recovery of deep discharged or sulfated batteries •Self-discharge test (following charging) according to a set voltage parameter •Long-term storage charging •International OEM recommendations •Includes eight sets of battery clips and eight extension cables •Compatible with all SAE accessories PART # 3807-0134 3807-0036
DESCRIPTION OptiMate™ Pro8 charger Wall bracket
SUG. RETAIL $699.95 44.95
DESCRIPTION Accumate 6/12 Mini
EXHAUST
ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS
OPTIMATE 1 3-STEP 900mA BATTERY CHARGER/MAINTAINER •Automatic charger for 12V lead-acid batteries of all types, with standard filler caps, or sealed (MF) maintenance-free and GEL •Ideal for maintaining batteries of seasonally used or stored vehicles of all types •Three-step charging program ensures effective charging of the battery •Totally safe for prolonged connection to the battery, without risk of overcharging •Easy to use, connect to battery, then to the power socket and the rest is automatic •An auto-resetting thermal fuse switches off the charger’s output circuit if the internal temperature for any reason exceeds a safe limit, to protect the charger from burn-out •Includes weatherproof connector with PART # DESCRIPTION SUG. RETAIL eyelets for permanent connection and 3807-0101 Optimate 1 $33.95 battery clips for bench charging
•Four-bank automatic six-stage charger initializes new sealed and filler cap batteries in one hour, plus desulfates and recovers neglected batteries – simply decide between a NEW or USED battery selection •Incorporates diagnostic checks and an automatic special recovery mode for deep-discharged (sulfated) batteries, making it suitable for all different types of powersports vehicle batteries •4 Amps constant current for each of the four battery banks/stations •Three battery type selections: STD, Deep cycle and MF for fully sealed, absorbed acid batteries •Automatic detection and recovery of deep discharged or sulfated batteries •Self-discharge test (following charging): voltage parameters set for the selected battery type •Can be used for long-term storage charging •Temperature-corrected testing and charging ensures accurate results and no damage to the battery SUG. RETAIL $699.95
HANDLEBARS, CONTROLS & MIRRORS CABLES
BRAKES
DASHES & GAUGES FRAMES, SUSPENSION & FENDERS 3807-0036
PART # 3807-0036
DESCRIPTION Wall bracket
•Fast, accurate and professional on-vehicle testing of 12V batteries and charging systems •Checks battery voltage to provide an indication of battery health; checks battery starting power and checks charging system without disassembly by indicating low charging voltage •Connect the TestMate Mini directly to the battery or “live” 12V outlet DESCRIPTION TestMate Mini battery and charging system tester
LIGHTING
TANKS & OIL FILTERS
3807-0133
TESTMATE MINI BATTERY AND CHARGING SYSTEM TESTER
PART # 3807-0028
SEATS & SISSY BARS
ELECTRICAL
BATTERY DIAGNOSTIC CHARGER, DESULFATOR AND MAINTAINER
DESCRIPTION OptiMate™ Pro 4 charger
LUGGAGE
SUG. RETAIL $38.95
OPTIMATE PRO 4
PART # 3807-0133
AUDIO & COMMUNICATION
FUEL/AIR SYSTEMS
•Automatic charger for 6V and 12V lead-acid batteries of all types, with standard filler caps, or sealed (MF) maintenance-free, AGM and GEL •Ideal for maintaining batteries of seasonally used or stored vehicles of all types •Three-step charging program ensures effective charging of the battery •Totally safe for prolonged connection to the battery, without risk of overcharging •Includes two detachable, interchangeable battery connectors: a connector with eyelets for permanent connection and battery clips for bench charging PART # 3807-0032
TOURING
SUG. RETAIL $49.95
ACCUMATE MINI 900mA 6/12V BATTERY CHARGER
OPTIMATE PRO8
21
SUG. RETAIL $32.95
All part numbers in BLUE are new for 2013.
SUG. RETAIL 44.95
FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL
1487
SECTION
21
WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE
UNIVERSAL USB CHARGERS •Charge your portable devices while riding: connect the USB charger to your vehicle’s battery charging cord and charge a variety of devices •Works with most 5V 3807-0179 USB-powered devices – charger/adapters are Apple, Garmin, Blackberry compatible •Compact USB charger includes a 40” USB cord, and micro and mini USB adapters •Weatherproof USB 3807-0177 charger is integrated into a 40” cord with a rubber cap to seal the USB port when not in use; includes micro and mini USB adapters •Low input (12.4V) auto-off •Short circuit proof •Overload protected •Accessories are equipped with an innovative heavy-duty O connection system that provides a reliable weatherproof connection between OptiMate battery chargers to or between OptiMate O accessories •The O connection system is compatible with standard SAE connectors that are gaining popularity world-wide as a battery charger inter-connector, and is widely used as a connector in heated riding gear PART # 3807-0177 3807-0178 3807-0179
DESCRIPTION Compact charger w/ SAE Connector Compact charger w/ SAE Connector (5-pk.) Weatherproof charger w/ 40” SAE connector
GASKETS & SEALS
SUG. RETAIL $32.95 32.95 (ea.) 35.95
PART # 3807-0180 3807-0181
DESCRIPTION SUG. RETAIL Weatherproof charger w/ 40” SAE connector (5-pk.) $35.95 (ea.) 40” extender set (includes a 40” USB cord and micro and mini USB adapters) 16.95
3807-0159
ELECTRICAL 3807-0163
3807-0161
LIGHTING
3807-0165
HANDLEBARS, CONTROLS & MIRRORS
3807-0166 3807-0167
CABLES 3807-0168 3807-0169
BRAKES 3807-0170
TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL
1488
3807-0171
3807-0172
3807-0174
3807-0175
CHARGER ACCESSORIES
3807-0176
•SAE eyelet connectors now available in five-, 10- and 100-piece bulk packs •For all TecMate chargers except the old-style Optimate Pro 4-S PART # SAE (BLACK 3807-0159 3807-0160 3807-0059 3807-0060 3807-0161 3807-0162 3807-0163 3807-0164 3807-0165 3807-0166 3807-0167
DESCRIPTION SUG. RETAIL PLUG) CHARGER ACCESSORIES Repl. eyelet connector $8.95 Repl. eyelet connector (5-pk.) 8.95 (ea.) Repl. eyelet connectors (10-pk.) 7.95 (ea.) Repl. eyelet connectors (100-pk.) 7.95 (ea.) 12V socket connector w/ 8A fuse, 20” L 18.95 12V socket connector w/ 8A fuse, 20” L (5-pk.) 18.95 (ea.) 6’ charge cable extender 8.95 6’ charge cable extender (5-pk.) 8.95 (ea.) Battery clips and cable, 20” L 8.95 Y-splitter w/ fuse, 18” L 15.95 SAE-TM adapter w/ 6” cable (adapts charger w/ black SAE plug to a white TM cord) 7.95
PART # DESCRIPTION SAE (BLACK PLUG) CHARGER ACCESSORIES (CONT) 3807-0168 TM-SAE adapter w/ 6” cable (adapts charger w/ white TM plug to a black SAE cord) 3807-0169 Weatherproof panel-mount DIN socket, 20” cable, rubber plug 3807-0170 Weatherproof panel-mount DIN socket, 20” cable, spring cap 3807-0171 DIN connector, 48” cable 3807-0172 15’ charge cable extender 3807-0173 15’ charge cable extender (5-pk.) 3807-0174 Y-splitter w/o fuse, 14” L 3807-0175 SAE to cigarette lighter socket adapter, 20” L 3807-0176 DIN to cigarette lighter socket adapter, 12” L
All part numbers in BLUE are new for 2013.
SUG. RETAIL
$7.95 19.95 31.95 18.95 11.95 11.95 (ea.) 10.95 14.95 19.95
SECTION
21
WINDSHIELDS & FAIRINGS 3807-0185
3807-0183
TOURING
CHARGE NOW!WARNING FLASHER •Connect to the battery; when device lights (flashing) battery has 50% charge remaining and it’s time to recharge •SAE connector PART # 3807-0183 3807-0184
DESCRIPTION For AGM/GEL batteries, flashes when voltage below 12.5V For AGM/GEL batteries, flashes when voltage below 12.5V (5-pk.)
SUG. RETAIL
PART # 3807-0185
$19.95 3807-0186 19.95 (ea.)
DESCRIPTION For standard/wet cell batteries, flashes when voltage below 12.35V For standard/wet cell batteries, flashes when voltage below 12.35V (5-pk.)
SUG. RETAIL
AUDIO & COMMUNICATION
$19.95 19.95 (ea.)
LUGGAGE SEATS & SISSY BARS EXHAUST
3807-0107
FUEL/AIR SYSTEMS 3807-0109
3807-0108
ENGINE 3807-0124
TRANSMISSION & DRIVELINE 3807-0110
3807-0112
GASKETS & SEALS 3807-0111
ELECTRICAL
LIGHTING 3807-0113
GENIUS BATTERY CHARGERS AND ACCESSORIES
Genius battery chargers are fully interactive and designed for safety. Many of the features include: auto-memory, the charger returns to the last selected mode when restarted; HF/HE switch mode design is high-frequency and high-efficiency for a light-weight, compact charger; rapid-charging technology charges batteries two-times faster than traditional linear battery chargers; multiple battery chemistry safely charges wet, GEL, MF, lead acid and AGM batteries; variable input compensation gives 100% full charge even with varying A/C input voltages; extendable connectors have plug-n-play connections for easy accessory changes; and abnormality protection automatically shuts off if the charger remains in bulk charge mode for an extended period of time.
HANDLEBARS, CONTROLS & MIRRORS CABLES
750 mA 6V-12V Battery Charger
BRAKES
•Smart, five-step, fully automatic switch-mode battery charger and maintainer •Best for small battery applications from 1.2-30Ah, such as motorcycles •Effectively maintains any 6V or 12V batteries in larger applications, such as cars, RVs and trucks •Includes clamp and eyelet connectors
TANKS & OIL FILTERS
1100 mA 6V-12V Battery Charger •Smart, seven-step, fully automatic switch-mode battery charger and maintainer •Best for small battery applications from 2.2-40Ah, such as motorcycles •Effectively maintains any 6V or 12V batteries in larger applications, such as cars, RVs and trucks •Features recovery mode and cold/AGM mode •Includes clamp and eyelet connectors
DASHES & GAUGES
3500 mA 6V-12V Battery Charger
FRAMES, SUSPENSION & FENDERS
•Smart, eight-step, fully automatic switch-mode battery charger and maintainer •Restores batteries to their original capacity •Recovers slightly sulfated batteries and provides maintenance charging to increase battery life •Versatile, provides charging modes for both small and large battery applications from 1.2-120Ah, such as motorcycles, cars, RVs and trucks •Features recovery mode, cold/AGM mode and small battery mode •Includes clamp and eyelet connectors
FOOTRESTS & LICENSE PLATE FRAMES
G4 6V-12V 4-bank Battery Charger •Advanced, fully-automatic, eight-step charger •Automatically diagnoses, recovers, charges and maintains your batteries •Safely charges wet, gel, MF and AGM batteries •4-bank charger; for 6V-12V 2.2-40Ah •Designed for safety; reverse polarity, short circuit, open circuit, sparkproof, overheat, overcurrent and overcharge PART # DESCRIPTION GENIUS BATTERY CHARGERS 3807-0107 750 mA 3807-0108 1100 mA 3807-0109 3500 mA 3807-0124 G4
SUG. RETAIL $37.95 53.95 74.95 239.95
PART # DESCRIPTION GENIUS BATTERY CHARGER ACCESSORIES 3807-0110 Connector clamp 3807-0111 Connector eyelet 3807-0112 10’ extension 3807-0113 SAE adapter
All part numbers in BLUE are new for 2013.
WHEELS & AXLES SUG. RETAIL $12.95 10.95 15.95 8.95
HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL
1489
SECTION
21
WINDSHIELDS & FAIRINGS DIGITAL BATTERY TESTER
BATTERY TERMINAL COVER KIT TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS
NOTE: Be sure to use the correct battery for your motorcycle. The two batteries have different terminal orientations and are not interchangeable.
•Takes the guesswork out of battery testing •Easy to use – just clamp tester onto battery terminals, select battery type and key in the battery’s capacity rating •Tester quickly analyzes battery’s condition and displays the results in an easy-to-understand digital readout •Designed specifically for 12V powersports batteries •Works with sealed and conventional batteries; safe for use even on discharged batteries •Essential shop and sales tool; lets you tell customers with complete confidence if their battery needs replacing
PART # 478651
PART # 3807-0001
•Allows the installation of maintenance-free battery YTX20L-BS in 91-96 Softail and 91-96 Dyna Glide and maintenance-free battery YTX-20BS in 84-90 Softail, 84-94 FXR and 86-96 XL models •Kit includes a terminal cover and two rubber battery spacers NOTE: Softail models must use shorter battery straps.
DESCRIPTION Battery terminal cover kit
EXHAUST
SUG. RETAIL $5.95
DESCRIPTION Digital battery tester
2113-0085
12V POCKET BATTERY TESTER
YU04-5
FUEL/AIR SYSTEMS 2113-0079
ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS
SUG. RETAIL $244.95
SPARE PARTS •Bolts and nuts sold in packs of five – sets of two each •Vent tube is 750mm long; fits all Yuasa batteries •Sold to dealer in packs of five; sold to consumer as each set PART # 2113-0079 2113-0082 2113-0080 2113-0085 YU04-5
DESCRIPTION Bolt/nut set (2 ea.) 6 x 11mm (5-pk.) Bolt/nut set (2 ea.) 6 x 12mm/20 (5-pk.) Bolt/nut set (2 ea.) 6 x 14mm (5-pk.) Bolt/nut set (2 ea.) 6 x 12mm/20 w/ small nut Vent tube – 750mm (5-pk.)
SUG. RETAIL $1.20 (ea.) 2.40 (ea.) 1.20 (ea.) 2.40 (ea.) 1.20 (ea.)
•The perfect size 12V battery tester for a technician’s pocket or tankbag, saddlebag or glove box •Easy-to-read rainbow meter indicates percentage of battery charge and good/bad alternator voltage range •Use with probes to test a battery in a vehicle, or remove the black (negative) cable from the fixed location for on-battery terminal testing at a counter or bench PART # DESCRIPTION SUG. RETAIL 3807-0150 12V pocket battery tester $10.95
ELECTRICAL
LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES
BRAKES TANKS & OIL FILTERS DASHES & GAUGES
12V AUTOMATIC BATTERY LOAD AND SYSTEM TESTER •True battery resistance tester that applies a resistance load that duplicates starting load conditions •Resistance load is auto-timed for increased accuracy •Unique “test and hold” feature locks the under load voltage reading for easy comparison to the pass/fail test matrix •Maximum starting resistance load: up to 400 CCA, 0-15V •Can also be used to test starter draw and charging system voltage using the open-circuit voltage meter function with the high-low-normal voltage matrix on the tester face •Includes safety reverse polarity indication •Built-in wall hanger
•Allows ease of battery removal and installation in Touring models and other bikes where the battery is removed vertically •Grips the battery in the case seam on each end; works on most sealed battery brands •Not recommended for use as a battery carrier; always support the battery weight under the battery once it is accessible •All-metal construction with a durable powdercoat finish that resists battery acid damage •For use on YIX30L and other similar size batteries with approximately 69/16” overall length
PART # 3807-0151
PART # 3807-0128
DESCRIPTION 12V Battery automatic load/system tester
SUG. RETAIL $54.95
BATTERY LIFT TOOL
DESCRIPTION Battery lift tool
SUG. RETAIL $29.95
FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL
1490
JUMPER CABLES •Simple to use and easy to store •Heavy-duty, 8’ 8-gauge cables won’t stiffen or freeze •Tangle-resistant, encased rubber grips for safety •Come with convenient storage bag PART # YUA00ACC07
DESCRIPTION Jumper cables
SUG. RETAIL $24.95
JUMPER CABLES •Heavy-duty 12-gauge 8’ copper jumper cables are big on charging power, yet stow conveniently in a 9” x 9” nylon bag •150A rating PART # JC-8
DESCRIPTION Jumper cables w/ bag
SUG. RETAIL $27.95
All part numbers in BLUE are new for 2013.
MOTORCYCLE JUMPER CABLES •Six foot, 12-gauge cable •Durable coating and rubber-encased grips for safer, more efficient jumps PART # DS-310490
DESCRIPTION 6’ jumper cable
SUG. RETAIL $14.95
SECTION
21
WINDSHIELDS & FAIRINGS 4110-0049 shown with optional wheel clamp 4110-0031
AIR LIFT MC615R •24” x 84” deck with rear drop panel offers 1,000-lb. capacity •Max raised height of 35”; lowered height is 7.25” •Automatic safety locks and loading ramp included •CE-approved covered dual pedals reduce chance of accidental actuation •Optional side panel set increases width from 24” to 48”; includes four panels and two ramps
TOURING AUDIO & COMMUNICATION
4110-0059
LUGGAGE
ORDERING INFORMATION: NO PARTSNET/DRAGNET WEB ORDERS. THESE ITEMS ARE DROP SHIPPED FROM K&L. NO RETURNS. PART # LIFT 4110-0049 4110-0050 4110-0051
DESCRIPTION
SUG. RETAIL
Blue Gray Red
$1,292.95 1,292.95 1,292.95
PART # ACCESSORIES 4110-0059 4110-0031
DESCRIPTION
SUG. RETAIL
Side panel set MC10 wheel clamp
SEATS & SISSY BARS
$351.95 215.95
EXHAUST FUEL/AIR SYSTEMS
4110-0053
ENGINE 4110-0052 shown with optional side panels; extension panel
TRANSMISSION & DRIVELINE
HEAVY-DUTY AIR LIFT MC625R •Heavy-gauge metal construction •Steel-framed base for extra support on uneven surfaces •Front and rear drop panels •1,750-lb. lifting capacity •29.5” x 86.5” deck •15” W loading ramp included Center jack and •40” maximum height shop dolly sold •Low 8.5” minimum height for easy loadings separately •Automatic safety locks •Optional front or rear 24” extension panel fits oversized ATVs and matches the lift deck width of 29.5” •Optional standard panel set includes four panels and two ramps; measures 13.5” W •Optional wide side panel set includes four panels and two ramps; 4110-0031 measures 19.68” W •Trike standard side panel set includes two standard side panels and two ramps; increases width to 59” •Trike wide side panel set includes two wide side panels and two ramps •Optional wheel clamp has a self-locking clamp that allows one person to load motorcycle onto lift
GASKETS & SEALS ELECTRICAL
LIGHTING 4110-0056
HANDLEBARS, CONTROLS & MIRRORS 4120-0008
CABLES
BRAKES
ORDERING INFORMATION: NO PARTSNET/DRAGNET WEB ORDERS. THESE ITEMS ARE DROP SHIPPED FROM K&L. NO RETURNS. PART # DESCRIPTION AIR LIFT 4110-0052 Gray/blue 4110-0053 Gray/red 4110-0054 Gray/gray OPTIONAL ACCESSORIES 4110-0033 Front or rear extension panel (sold each) 4110-0055 Standard side panel set
SUG. RETAIL $1,699.95 1,699.95 1,699.95 176.95 476.95
PART # DESCRIPTION OPTIONAL ACCESSORIES (CONT) 4110-0057 Wide side panel set 4110-0056 Trike side panel set 4110-0058 Wide trikeside panel set 4110-0031 MC10 wheel clamp 4120-0008 Lift dolly
37-9885
MULTI-LIFT
DESCRIPTION Multi-lift Adapter plate for 91-03 Dyna
$529.95 377.95 388.95 215.95 105.95
DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES
•Four-ton bottle jack; 1,200-lb. capacity •Three height positions: 4.5”, 9” and 17” •16” padded contact area; even lift with no listing •Foot-operated valve and locks; locking neoprene casters •1.5” square steel tubing •Adapter plates for Dyna Glide and Sportster provide clearance necessary to use the multi-lift; sold separately PART # 37-9885 35-0806
SUG. RETAIL
TANKS & OIL FILTERS
HARDWARE, CHEMICALS & TOOLS SUG. RETAIL $411.95 67.95
All part numbers in BLUE are new for 2013.
COVERS, SECURITY & GENERAL
1491
SECTION
21
WINDSHIELDS & FAIRINGS
4120-0004 shown with 4110-0011 (sold seperately)
TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS
FAT JACK DOLLY
FAT JACK CENTER JACK •Easy-to-use scissor jack is the answer for raising bikes and ATVs •Lifts front or rear of bikes that are on MC600-type lifts •Wide deck with rubber nonskid pad increases lifting area for increased stability •Measures 16” L x 10” W PART # 4110-0011
DESCRIPTION Fat Jack center jack
•Dolly makes the Fat Jack PART #4110-0011 mobile without having to attach permanent wheels •Maximum weight capacity is 600 lb. PART # 4120-0004
DESCRIPTION Fat Jack dolly
SUG. RETAIL $142.95
SUG. RETAIL $284.95
ENGINE 4120-0009
CENTER JACK
GASKETS & SEALS
•This table-top model is 16” L x 5” W •Height adjusts from 3.5” to 13” •Available in zinc finish •Optional rubber nonskid pad mounts to top surface of center jack with self-adhesive backing
ELECTRICAL
PART # 37-9841 4110-0010
TRANSMISSION & DRIVELINE
DESCRIPTION Zinc center jack Optional nonskid mat
4110-0035
SUG. RETAIL $275.95 17.95
LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES
CENTER JACK AND H-D TRIKE ADAPTER •Wide footprint offers stability •Keeps the weight centered – an important safety consideration •3.5” minimum and 13” maximum height •Deck measures 23” L x 5.5” W Trike adapter •12.5” base width shown on center jack •1,100 lbs. maximum weight •Trike adapter must be ordered to lift H-D trikes with center jack; sold separately PART # 4110-0035 4120-0009
4110-0048
DESCRIPTION Center jack H-D trike adapter
SUG. RETAIL $357.95 77.95
BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL
1492
4110-0065
CENTER JACK •Sturdy, yet affordable scissor jack for lifting motorcycles for service or cleaning •Large footprint makes the jack stable •Strong enough to lift an entire motorcycle •Durable rubber top pad protects the motorcycle and prevents slipping when raising or lowering the jack •Heat-treated hex drive turns robust worm gear for precise height adjustment •Lowered height: 31/2”; maximum raised height: 141/2” •Standard center jack deck measures length: 151/4”; jack width: 9” •Narrow center jack deck measures length: 15”; jack width: 5” •Capacity: 1,000 lb. NOTE: Do not use air or electric impact guns to raise and lower the jack. PART # 4110-0048 4110-0065
DESCRIPTION Standard center jack Narrow center jack
SUG. RETAIL $149.95 139.95
SCISSOR LIFT •Easily lifts your bike free and clear of the ground •Provides a stable base for performing routine maintenance •Slips under the frame rails of most motorcycles •Lifts up to 1,000 lb. •Worm-drive lift mechanism makes raising or lowering the bike nearly effortless •No messy hydraulics to deal with •Measures 31/2” collapsed and 83/4” extended •Durable black powder-coat and long lasting heavy-duty steel construction •Made in the U.S.A. PART # 4110-0036
All part numbers in BLUE are new for 2013.
DESCRIPTION Scissor lift
SUG. RETAIL $199.95
SECTION
21
WINDSHIELDS & FAIRINGS LIFT CADDY
DELUXE ROLLASTAND
•Easily moves your lift and machine around the shop •Installs in less time than it takes to change oil •Includes two heavy-duty 360° casters and mounting stand capable of handling heavy weight motorcycles •Fits all lifts that have 2” square bottom cross member and 15” of mounting room on cross member •Made in the U.S.A.
•Designed for bikes without center-stands •Wheel positioned in Rollastand turns easily for cleaning, chain adjustment and other maintenance jobs •Easy one-person operation •No danger of dropping bike •Sealed bearings •Nonslip backing •Deluxe black billet aluminum finish
PART # 4110-0047
PART # RS-00002
DESCRIPTION Lift caddy
SUG. RETAIL $197.95
DESCRIPTION Deluxe Rollastand
TOURING AUDIO & COMMUNICATION LUGGAGE SUG. RETAIL $49.95
SEATS & SISSY BARS EXHAUST LOW RIDING RAMP •Raises either wheel 3” •Made of .125”-thick diamond-plate metal; bottom of ramp has rubber footing for a sure grip •Necessary when using K&L Dyna Glide adapter plate PART #35-0806; recommended when lifting a lowered Softail onto the K&L Multi-Lift PART #37-9885
SHOP DOLLY •Width adjusts from 13” to 20” at base •15” maximum height •Swiveling neoprene wheels PART # 35-9872
DESCRIPTION Shop dolly
DS-310247
DS-310249
SUG. RETAIL $307.95
PART # 35-0808
DESCRIPTION Low riding ramp
SUG. RETAIL $77.95
DS-310248
FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL
OIL FILTER DRAIN TRAYS •Tired of hot oil running down your oil filter and all over your bike and floor? •Once the filter has been loosened, these unique drain trays fit underneath the oil filter and against the filter mount to direct the oil into your catch pan – not all over your bike or the floor •Manufactured from a carefully selected polymer to resist chemical attack and dimensional distortion from the hot oil •Easy to keep clean, and small enough to take with you on that long trip •Indispensable in any shop, home garage or on the road •Made in the U.S.A.; sold each PART # DS-310249 DS-310247 DS-310248
DESCRIPTION For 99-09 Twin Cam FLHT, FLHR, FLTR and 99-05 FXD For 84-99 Evolution Big Twin For 86-03 XL
SUG. RETAIL $17.95 17.95 18.95
LIGHTING
OIL DRAIN PAN •Oil drain pan with a built-in container •Screw on cap and plug provides a tight, positive seal •Prevents messy spills •Compact and lightweight •Easy to store, carry and empty •Features an extra-large handle for a comfortable and secure grip •Holds 6 quarts or 1.5 gallons •12” x 16” x 5” PART # 0712-0360
DESCRIPTION Oil drain pan
SUG. RETAIL $19.95
HANDLEBARS, CONTROLS & MIRRORS CABLES
BRAKES
3801-0166
OIL FILTER WRENCHES 3801-0167
•Close-clearance design makes it easier to service hard-to-remove or hard-to-reach filters •Features a 3/8” ratchet mount and full flutes for a firm grip on the filter •Each comes skin-packed on its own card for easy display •Sold each •Made in the U.S.A. PART # DS-275120
3” OIL FILTER WRENCH •Easily gets into tight spot to loosen filter without slipping •Features 14 flutes on filter wrench end; other end features 5/8” drain plug wrench •Sold each or in a card of 10 wrenches PART # DESCRIPTION SUG. RETAIL FITS OIL FILTERS OEM #S 63798-99, 63796-77A, 63806-83, 63805-80A, 63782-80, 63810-80 (ALSO FITS DRAG SPECIALTIES OIL FILTERS) (14 FLUTE) 3801-0166 Oil filter wrench, card of 10 $199.95 3801-0167 Oil filter wrench, ea. 19.95
DS-275121 17002
TANKS & OIL FILTERS
DS-275120
DASHES & GAUGES
DESCRIPTION SUG. RETAIL Oil filter wrench, 76mm single step, 14 flutes; fits OEM #s 63805-80A, 63805-80T, 63806-83. Filter wrench works with all factory spin-on kits; Drag Specialties filter PART NO. DS-275117 $9.95 Oil filter wrench, 74/76mm double step, 15 flutes; fits Fram PH6022 9.95 Oil filter wrench for Emgo 74mm single step w/ 15 flutes (fits Emgo 10-07800/10-07700 for Harley-Davidson) 9.95
SLIM OIL FILTER WRENCH •Simply the slimmest oil filter wrench around •An exclusive design makes it much easier to navigate when working near both the oil cooler and the crankcase position sensor •Allows you more room to work around exhaust pipes, frame, hoses and brackets •Features a 3/8” square drive •Ensures a good grip on any H-D spin-on oil PART # DESCRIPTION filter with a 14-flute end 3801-0216 Slim oil filter wrench •Made in the U.S.A.
All part numbers in BLUE are new for 2013.
FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS
SUG. RETAIL $31.95
COVERS, SECURITY & GENERAL
1493
SECTION
21
WINDSHIELDS & FAIRINGS 3” OIL FILTER WRENCH TOURING AUDIO & COMMUNICATION
•Black stamped steel; 14-flute design •Cutout design to clear crank sensor •Fits Drag Specialties and most other oil filters with 14 flutes PART # 1606-6044
DESCRIPTION For most 01-13 Twin Cam and other models
SUG. RETAIL $9.95
OIL FILTER CUTTER •Use to inspect oil filter for any damaging particles that may be trapped in filter •Locks down filter for a clean cut around filter base •Fits filters up to 51/2” dia. •Made in the U.S.A.
LUGGAGE 3812-0025
SEATS & SISSY BARS
PART # 3801-0139
DESCRIPTION Oil filter cutter
SUG. RETAIL $155.95
EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL
3812-0026 3812-0024
HEX-PRO™ AND STAR-PRO™ PIVOT HEAD WRENCHES •180° swivel head with extra-long handle for accessing hard-to-reach places •Pivot design allows for easy rotation around obstructions •Pivot design allows you to keep the wrench and fastener engaged when access is limited •Great time saver •Heat-treated alloy tool steel •Chrome-plated finish •Include heavy-duty folding canvas storage pouch •Take up less storage space than a typical hex key set PART # 3812-0024 3812-0025
LIGHTING
3812-0026
DESCRIPTION Hex-Pro SAE Pivot Head Hex Wrench Set – 3/16”, 7/32”, 1/4”, 5/16”, 3/8” Hex-Pro Metric Pivot Head Hex Wrench Set – 3mm, 4mm, 5mm, 6mm, 8mm, 10mm Star-Pro Pivot Head Torx® Wrench Set – T-25, T-27, T-30, T-40, T-45, T-50
SUG. RETAIL $62.95
TWO-PIECE RETAINING RING PLIERS SET •Contains two Quick Switch (internal/external) interchangeable tip pliers •First set of pliers works on internal ring sizes of 1/4”-1” (7mm-26mm) and external rings 1/8”-1” (3mm-26mm) •Other set works on internal sizes of 3/8”-2” (10mm-51mm) and external sizes of 1/4-2” (7mm-51mm) •Each plier comes with five pairs of color-coded interchangeable tips (20 total) •Packaged in routed foam for easy storage PART # 3801-0205
DESCRIPTION Two-piece retaining ring pliers set
SUG. RETAIL $76.95
62.95 73.95
HANDLEBARS, CONTROLS & MIRRORS CABLES AUTO CLAMP PLIERS BRAKES TANKS & OIL FILTERS
•Just open the jaws and squeeze •Automatically adjust to the proper size for optimum gripping power •Truly a “one-hand” operation •Makes any job quicker and easier than ever before •Thin raised-jaw design provides easy access to tight areas
SNAP RING PLIERS
PART # 3850-0111
PART # MP08-0186
DESCRIPTION Auto clamp pliers
SUG. RETAIL $23.95
•Economical pliers easily do both inside and outside opening of snap rings or clips •Includes three extra sets of tips: one additional straight tip and two offset or angle tips DESCRIPTION Snap ring pliers
SUG. RETAIL $15.95
DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL
1494
TORQUE WRENCH
ADJUSTABLE TORQUE WRENCH ADAPTER
•Precision built, accurate •19” long with 1/2” square drive •Direct reading scale: 0/150 ft./lb. and metric kilograms 0/20 M/kg •Most popular torque wrench size •Made in the U.S.A.
•Torque any fastener with a combination wrench or Allen wrench •Will work with 6mm (1/4”) through 19mm (3/4”) combination wrenches •Will work with 6mm (1/4”) through 8mm (5/16”) Allen wrenches •Heat-treated steel with a black oxide finish •3/8” square drive is rated for a maximum torque of 90 ft.-lbs. (122.02 N-m) •Made in the U.S.A.
PART # W-3001C
PART # 3850-0078
DESCRIPTION Torque wrench
SUG. RETAIL $17.95
DESCRIPTION Adjustable torque wrench adapter
All part numbers in BLUE are new for 2013.
SUG. RETAIL $49.95
SECTION TUBING/ HOSE CUTTER AND TUBE GAUGE
UNIVERSAL FLYWHEEL PULLER
•Tubing/hose cutter and tube gauge in one convenient package •Durable and lightweight tubing/hose cutter works with 1/8” to 3/4” o.d. tubing •Tube gauge measures o.d. and i.d. in both standard and metric sizes
•For most motorcycle, ATV, watercraft and snowmobile engines •Complete with hardware kit and adapter for male or female removal
PART # 3850-0118
DESCRIPTION Tubing/hose cutter
SUG. RETAIL $12.95
PART # 855
WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION
DESCRIPTION Universal flywheel puller
SUG. RETAIL $64.95
HOSE SHEARS THREAD CHASER TAP SET •An inexpensive way to clean up threads on frames or other parts that have been powder-coated or painted •Includes coarse sizes 1/4”-20, 5/16”-18, 3/8”-16, 7/16”-14, 1/2”-13 and 9/16”-12 •Zinc-plated steel construction •Not for cutting new threads •Made in the U.S.A. PART # 3801-0138
DESCRIPTION Thread chaser tap set
DESCRIPTION Gear Jammer tool
SUG. RETAIL $14.95
SUG. RETAIL $249.95
T-HANDLE SPINNERS
DESCRIPTION 1/4” drive (10” L) 3/8” drive (12” L)
3812-0037
SUG. RETAIL $19.95 20.95
FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS
DESCRIPTION Rotor and sprocket holder
SUG. RETAIL $33.95
ELECTRICAL
LIGHTING HANDLEBARS, CONTROLS & MIRRORS
IMPACT DRIVER
PART # W-2500 W-2500-36MM
3812-0039
•High-quality Motion Pro T-handle •Blue anodized bearing-mounted spinner with low friction bearings provides faster and easier removal and installation of bolts and nuts •Chrome-vanadium handle and shaft •Durable chrome finish on shaft and handle •Padded grip handle 1 • /4” or 3/8” drive
SUG. RETAIL $30.95
•A must for all mechanics; includes four bits in a plastic pouch •Replacement bits available in set of four •Made in the U.S.A.
•Set includes 30, 25, 20, 17, 15, 12, 10 and 8mm collets •2-lb. hammer •Crossbar-type shaft allows easy collet removal •Fitted storage box included •Necessary tool for most transmission rebuilds •Can be used for wheel bearing removal
PART # 3812-0039 3812-0037
PART # 3808-0003
3/8”
DESCRIPTION Blind bearing removal set
DESCRIPTION Hose shears
•Keeps flywheels, rotors and sprockets from rotating during removal and installation •Holds sprockets and rotors with holes center-to-center at a minimum distance of 1/2” (13mm) and a maximum distance of 9” (230mm) •Features 5mm and 9mm pins •Adjustable stop-screw keeps tool open at set distance
BLIND BEARING REMOVAL SET
PART # 3812-0003
EXHAUST
ROTOR AND SPROCKET HOLDER
•Locks gears in place for easy installation and removal •Allows tightening of lock nuts to proper torque setting •Works on virtually any motor •Powerful magnet holds tool in place during use •Billet 6061 T-6 aluminum construction •Not for use with impact gun •Blue anodizing with laser engraving •Patent pending •Made in the U.S.A. PART # 3801-0113
PART # 3801-0033
LUGGAGE SEATS & SISSY BARS
•Scissor-action cutter •Fast cutting of thin wall and small diameter PVC or Tygon® type tubing •Replaceable, PTFE-coated tool steel blades •Blades can be re-sharpened
SUG. RETAIL $58.95
GEAR JAMMER
21
STANDARD T-HANDLE SOCKET SET
All part numbers in BLUE are new for 2013.
SUG. RETAIL $20.95 6.95
BRAKES TANKS & OIL FILTERS
MP08-0315
•Features chrome vanadium tool steel, deep six-point sockets and Phillips bits with carbon steel T-style handles •Sold in a set of eight wrenches: 5/16”, 3/8”, 7/16”, 1/2”, 9/16”, 5/8”, 11/16” and 3/4” sizes •Slim outside diameter allows sockets to fit in tight areas •Storage rack available – new onepiece design with chrome finish holds 11 T-handle tools; hooks to toolbox or tray •Wall-mount bracket for new one-piece storage rack features quick-release pin for removing and attaching and a built-in bottle opener; made from heavy-duty 12-gauge zinc-plated steel; made in the U.S.A. •Wall-mount bracket is made in the U.S.A. PART # MP08-0315 08-114X 3801-0114
CABLES
DESCRIPTION Impact driver w/ four bits 36mm bit set
DASHES & GAUGES FRAMES, SUSPENSION & FENDERS
08-114X
FOOTRESTS & LICENSE PLATE FRAMES 3801-0114
DESCRIPTION Standard T-handle set T-handle tool rack Wall bracket for T-handle tool rack
WHEELS & AXLES
SUG. RETAIL $80.95 18.95 20.95
HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL
1495
SECTION
21
WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE
3812-0007
DUAL DRIVE MINI T-HANDLES •Use T-handle drive to tighten/loosen fasteners and shaft drive for quick installation/removal of fasteners •3/8” drive has a compact 73/4” drive shaft length; 1/4” drive has a compact 61/2” drive shaft length •For tight access and easy transport •Use with 3/8” or 1/4” sockets, hex drives, crow’s foot, swivels, etc. •Chrome vanadium tool steel shafts •Durable hard-nickel pewter finish PART # 3812-0008 3812-0007
3812-0008
DESCRIPTION drive, 61/4” L shaft 3/8” drive, 71/2” L shaft
7-PC. FINE-TOOTH BIT WRENCH SET
SUG. RETAIL $6.95 9.95
1/4”
•Consists of one 15° off-set wrench, one 15° reverse off-set wrench, one flat wrench, and four bits (sizes #1 and #2 Phillips, 1/4” and 9/32” slotted) PART # 3812-0038
DESCRIPTION 7-pc. fine-tooth bit wrench set
SUG. RETAIL $48.95
SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS
3812-0034
DIGITAL CALIPER WITH CASE
3812-0032
•Measures outside, inside, depth and step •0-6” range (0-150mm) with SAE to metric conversion •Large, easy-to-read LCD display •Zero setting at any position within measuring range •Data output socket for interface with computer or printer •Thumbwheel with lock •On/off switch •Chrome satin finish with fine engraved markings •Heavy-duty plastic case keeps caliper safe and clean •Battery included PART # 3850-0071
DESCRIPTION Digital caliper w/ case
3/8”
DRIVE SOCKET BIT SETS
•Top-grade hex and Torx bit socket sets include all the sizes you’ll need •Each set includes a socket rail with handle for quick organization •Easy to read sizes with reverse laser imprint on each socket for quick identification •Mechanic-grade with a heat-treated chrome vanadium alloy that exceeds ANSI specifications
SUG. RETAIL $40.95
PART # 3812-0032 3812-0034
DESCRIPTION 10-pc. fractional hex bit set 10-pc. Torx bit set
3850-0018
SUG. RETAIL $24.95 29.95
3850-0019
ELECTRICAL 3850-0021
4-IN-1 SCREWDRIVER LIGHTING HANDLEBARS, CONTROLS & MIRRORS
•Fishbowl display contains 20 screwdrivers •Each screwdriver contains extension, two Phillips and two flat bits •Great for tool pouches •Made in the U.S.A. PART # 3850-0092
DESCRIPTION 4-in-1 screwdriver
3850-0020
SUG. RETAIL $2.95 (ea.)
CABLES
BRAKES SPRING PULLER
TANKS & OIL FILTERS
•Compact, lightweight, strong .102 diameter spring tempered wire •Urethane-covered handle •7” long •Made in the U.S.A.
DASHES & GAUGES
PART # 3850-0187
DESCRIPTION Spring puller
SUG. RETAIL $6.95
1/4”
AND 3/8” DUAL L-HANDLE DRIVERS
•Impact-resistant ergonomic handles reduce hand fatigue •Use handle drive to tighten/loosen fasteners and shaft drive for quick installation/removal of fasteners •Standard L-handle drivers have a 97/8” L (250mm) shaft; mini L-handle drivers have a compact 75/8” (195mm) shaft length for tight access and easy transport •One-piece chrome vanadium tool steel shaft •Use with drive sockets, hex drivers, crow’s foot, swivels, etc. •Durable hard nickel pewter finish PART # 3850-0018 3850-0019 3850-0020 3850-0021
DESCRIPTION 3/8” drive L-handle driver 1/4” drive L-handle driver 3/8” drive mini L-handle driver 1/4” drive mini L-handle driver
SUG. RETAIL $12.95 11.95 12.95 11.95
FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL
1496
ALUMINUM VISE JAWS •4” aluminum soft jaws work with any 4”-6” vise •Six strong magnets hold jaws securely in place •Anodized billet aluminum construction •V-shaped cutouts hold and protect round or hex parts •Protects the finish of any painted, anodized or chrome component •Great for holding engine and suspension parts PART # 3850-0158
DESCRIPTION Aluminum vise jaws
SUG. RETAIL $29.95
HOSE CLAMP TOOL •Pinches off fuel lines when changing filters •Prevents fuel loss and spillage PART # 660650
DESCRIPTION Hose clamp tool
All part numbers in BLUE are new for 2013.
SUG. RETAIL $16.95
SECTION
21
WINDSHIELDS & FAIRINGS BRUSH SET STAINLESS STEEL GASKET BRUSH •Stainless steel bristles •Excellent for removing carbon deposits and old gaskets PART # DS-173398
DESCRIPTION Gasket brush
SUG. RETAIL $8.95
•Five-piece set includes cleaning brush, mini brushes and fingernail brushes •Contents: 101/4” parts-cleaning brush with 21/2” long bristles, 7” brush with 1/2” long nylon bristles, 7” brush with 1/2” long brass bristles, 7” brush with 21/2” long steel bristles and 3” fingernail brush with 3/8” long nylon bristles PART # 3850-0155
TOURING AUDIO & COMMUNICATION
DESCRIPTION Brush set
SUG. RETAIL $6.95
0363-0050
SEATS & SISSY BARS
5-GAL. AIR TANK •125 psi maximum •Lightweight and portable, with handle for easy transport •Pressure bypass valve with manual override •On/off air adjustment dial •Includes industrial-grade air hose with standard tire air chuck •Hi-viz color for added visibility PART # 0363-0051
DESCRIPTION Air tank
AIR TANK ACCESSORY KIT
EXHAUST
•Kit includes easy-to-read, two-color 0-200 psi gauge; brass manifold and 4’ air hose with 1/4” NPT female tire chuck •All components also available separately
SUG. RETAIL $60.95
PART # 0363-0050 0363-0047 0363-0048 0363-0049
DESCRIPTION Air tank accessory kit 0-200 psi air gauge 4’ air hose w/ tire chuck Air tank manifold
LUGGAGE
SUG. RETAIL $27.95 7.95 9.95 11.95
FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE
•Alloy steel construction •Plated to resist corrosion PART # 3850-0153
DESCRIPTION Carbon and gasket scraper
GASKETS & SEALS
GASKET LOCATOR TOOL
CARBON AND GASKET SCRAPER SUG. RETAIL $7.95
•Aligns primary cover, cam cover, and transmission end cover gaskets to avoid misalignment and oil leaks PART # DESCRIPTION 1 • /4”-20 thread 3801-0093 Gasket locator tool (3-pc.) •Made in the U.S.A.
SUG. RETAIL $35.95
ELECTRICAL
LIGHTING HANDLEBARS, CONTROLS & MIRRORS
EXTENDED SCRAPER •12” length reaches confined areas •Extra blades store in handle PART # 3850-0152
DESCRIPTION Extended scraper
SAFER SCRAPER™ SUG. RETAIL $6.95
DIAGNOSTIC STETHOSCOPE •Super sensitive •Helps identify noises in engine, transmission, transfer case, valve train, etc. •11” probe tip extends into confined areas PART # 3850-0149
DESCRIPTION Diagnostic stethoscope
CABLES
•Designed to be used for a variety of cleaning and scraping applications •Special hard plastic razor blade is ideal for removing decals, bugs and tar •Also ideal for removing gaskets from a plastic or aluminum flange •Includes two refillable blades •12 per case, sold each PART # 3807-0117
DESCRIPTION Safer Scraper™
BRAKES
SUG. RETAIL $5.95
TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS
SUG. RETAIL $11.95
FOOTRESTS & LICENSE PLATE FRAMES 6-PIECE HOOK AND PICK SET
PARTS WASHER
•Includes straight, angled and combination picks •Durable double-injection-molded handles •Handy storage tray included •Set contents: straight pick, 90° pick, double angle pick, complex pick, combination pick and hook pick PART # 3850-0150
DESCRIPTION Hook and pick set
•A great tool for cleaning small parts •Tank measures 173/8” x 141/4” x 83/4”; removable 153/8” x 113/8” tray for quick drying and easy exam •133/4” flexible metal spigot •31/2 gallon maximum solvent capacity; recycles cleaning solvent •Heavy-gauge steel construction, 110 Volt UL pump SUG. RETAIL $12.95
PART # 3850-0154
All part numbers in BLUE are new for 2013.
DESCRIPTION Parts washer
SUG. RETAIL $116.95
WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL
1497
SECTION
21
WINDSHIELDS & FAIRINGS STRAP WRENCH SET TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS
PROFESSIONAL BARREL PUMP
•3/8” to 61/2” two-piece strap wrench set •Durable non-slip rubber strap for industrial strength and added grip •Flexible strap fits any shape and works easily in confined areas •Versatile usage; for oil filters and more •Two-tone color handle with PVC coating for extra control PART # 3850-0148
•Lever-style barrel pump with non-drip spout •Equipped with brass rings and a floating piston design •Self-adjusting telescopic suction tube •Designed to pump all lubrication-based fluids, antifreeze, agricultural and industrial noncorrosive fluids •Dispenses approximately 12 oz. per one stroke •Multi-directional handle •2.25” o.d. threads
DESCRIPTION Strap wrench set
SUG. RETAIL $12.95
PART # 3850-0147
DESCRIPTION Barrel pump
SUG. RETAIL $54.95
3850-0104
EXHAUST 3850-0105
FUEL/AIR SYSTEMS ENGINE
MINI FLUID EVACUATOR
3850-0103
VACUUM PUMP KITS GENERAL PURPOSE PUMP KIT
TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL
•Handy for troubleshooting and tune-ups •Dial gauge indicates pressure in both inches and centimeters of mercury •Useful for testing fuel petcocks, carburetors and vacuum advances •Brake bleeding kit bleeds brakes, clutches or other hydraulic systems •Brake bleeding kit includes fittings, hose and 114-page instruction manual •Pump rebuild kit is designed to perform routine maintenance on PART #s 3850-0103 and 3850-0104 PART # 3850-0104 3850-0103 3850-0105
DESCRIPTION General purpose pump kit Brake bleeding kit Pump rebuild kit
SUG. RETAIL $59.95 52.95 24.95
•Compressed air operation •Integrated 1.9-qt. capacity reservoir •Variable-control thumb throttle •Swivel air inlet •Quiet, muffled exhaust •Automatic overflow prevention •Includes 4’ fluid evacuation hose, molded base, hanging hook and user manual •Made in the U.S.A. PART # 3850-0034
DESCRIPTION Mini fluid evacuator
SUG. RETAIL $161.95
LIGHTING AIR FORCE MASTER BLASTER™ DRYER HANDLEBARS, CONTROLS & MIRRORS CABLES
BRAKES TANKS & OIL FILTERS
3850-0052
•Sturdy all-steel dryer features dual 4 hp (peak) fan motors that deliver up to 58,500 fpm of clean, filtered, warm airflow •Two switches allow users to set the airflow and temperature at three different levels •Use either motor (front or rear) independently or both simultaneously for maximum power (eight peak-horsepower total) •Includes 12’ cord, 10’ x 11/2” dia. heavy-duty flexible hose and five different nozzles to enable users to position airflow where desired and eliminate water spots •EZ-change foam filter •Mounted on wheels •Weighs only 16 lb. •Made in the U.S.A. PART # 3850-0052
DESCRIPTION Master Blaster air dryer
SUG. RETAIL $449.95
3850-0123
PART # 3850-0123
DESCRIPTION Wall-mount kit
SUG. RETAIL $24.95
3850-0035
DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES
AIR FORCE BLASTER® B-3™ MOTORCYCLE DRYER
HARDWARE, CHEMICALS & TOOLS
•Cuts drying time by as much as 75% •Sturdy all-steel power unit •9.5A, 4 hp (peak) motor produces 29,250 fpm airflow with a two-stage dual fan •Includes 10’ x 11/2” commercial-strength 3850-0036 flexible hose and heavy-duty neoprene blower nozzle •Also includes 12’ heavy-duty three-prong cord and EZ-change foam filter •Weighs only 8 lb. •Optional bracket + 10’ hose allows the dryer to be mounted to wall or table, and extends its effective range to 20’ for ease of use •Made in the U.S.A.
COVERS, SECURITY & GENERAL
PART # 3850-0035 3850-0036
WHEELS & AXLES
1498
DESCRIPTION Blaster B-3 dryer Opt. bracket + 10’ hose
SUG. RETAIL $249.95 59.95
BLASTER SIDEKICK DRYER
3850-0055
•Compact, powerful hand-held motorcycle dryer small enough to put into a saddlebag, yet strong enough to dry a bike off in minutes •Weighs approximately 3 lb. •Features a 950W, 8A motor at 120V •Includes a 12” power cord, neoprene blower nozzle, and air flare •Made in the U.S.A. PART # 3850-0055 3850-0077
All part numbers in BLUE are new for 2013.
DESCRIPTION Blaster Sidekick dryer Repl. foam filter
SUG. RETAIL $109.95 4.95
SECTION
21
WINDSHIELDS & FAIRINGS TOURING 3 STAR CABINET WITH WORK STATION
5 STAR CABINET WITH WORK STATION
PART # 3902-0099
AUDIO & COMMUNICATION
•Versatile design in a compact size •Available in standard aluminum •Dimensions: 12.5” W x 23.5” T x 5.25” D (16.5” D with work station down)
•Mount in garage or trailer •Features handy combination of shelves, a drop-down work station and double paper towel holder •Available in standard aluminum •Dimensions: 25” W x 34” T x 5.25” D (19.5” D with work station down)
PART # 3902-0100
DESCRIPTION 5 star cabinet w/ work station
DESCRIPTION 3 star cabinet w/ work station
SUG. RETAIL $141.95
LUGGAGE SEATS & SISSY BARS
SUG. RETAIL $303.95
EXHAUST DUAL HELMET CADDY •Store your helmet and gear with style •Holds two helmets •Also has seven slots for jerseys or street wear and has a removable bar to hold goggles, gloves or kidney belts •Available in standard aluminum •Dimensions: 28.5” W x 11.75” T x 15” D
MULTIPURPOSE SHELF •Solid construction and plenty deep to hold a variety of things •Available in standard aluminum •Dimensions: 15.25” W x 6” T x 5” D PART # 3902-0102
DESCRIPTION Multi-purpose shelf
PART # 3902-0103
FUEL/AIR SYSTEMS ENGINE
DESCRIPTION Dual helmet caddy
SUG. RETAIL $189.95
SUG. RETAIL $47.95
TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL
HOLESHOT BROOM •Sturdy construction •Two-piece design unscrews for storage •Perfect for trailer or garage •Broom + scraper edge design •Available in diamond plate aluminum
HELMET HANGER •Keeps a helmet off the floor and in a convenient, safe place •Available in standard aluminum •Dimensions: 3.5” W x 3.5” T x 5.25” D PART # 3902-0097
PART # 3902-0106
DESCRIPTION Helmet hanger
DESCRIPTION Holeshot broom
SUG. RETAIL $25.95
LIGHTING SUG. RETAIL $73.95
HANDLEBARS, CONTROLS & MIRRORS CABLES
BRAKES TANKS & OIL FILTERS
FLASHLIGHT HOLDER •Design is enclosed to help and protect a Maglite flashlight •Available in standard aluminum •Dimensions: 3” W x 6.25” T x 3.25” D •Does not include flashlight
PAPER TOWEL HOLDER •Great for shop or trailer •Handy shelf on top •Available in standard aluminum PART # 3902-0101
DESCRIPTION Paper towel holder
SUG. RETAIL $35.95
PART # 3902-0098
DESCRIPTION Flashlight holder
DASHES & GAUGES SUG. RETAIL $31.95
FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES
DOUBLE PIT PASS HANGER •Designed to hang up pit passes and more •Also features two hanger extensions to store goggles, tape or extension cords out of the way •Available in standard aluminum •Dimensions: 11” W x 3.5” T x 2.75” D
STANDARD HOSE HANGER
PART # 3902-0107
PART # 3902-0096
DESCRIPTION Double pit pass hanger
•Prevents tangling of hoses; adds a professional look to the garage or trailer •Available in standard aluminum •Dimensions: 8.25” W x 8” T x 5” D
SUG. RETAIL $31.95
DESCRIPTION Hose hanger
All part numbers in BLUE are new for 2013.
SUG. RETAIL $31.95
HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL
1499
SECTION
21 P08‑156
WINDSHIELDS & FAIRINGS MAGNETIC PARTS DISH
TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS
•All‑purpose magnetic dish is ideal for keeping track of loose fasteners and other small parts •Attaches magnetically to any steel surface •Measures 5” in diameter and is 1” deep
MAGNETIC FINGER GLOVE
PART # P08‑156 3850‑0125
•Holds small metal objects •Great for starting or removing fasteners in hard‑to‑reach places •Two‑way stretch spandex •Leatherette bottom and fingertip •Stretch finger panels •Sold to dealer in card of six; sold each to consumer PART # 3850‑0051
DESCRIPTION Magnetic finger glove
SUG. RETAIL $12.95 (ea.)
EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS
SUPERBRIGHT™ 9‑LED FLASHLIGHT •Ultra‑tough gun metal gray aluminum body •Nine LEDs provide a pleasant hue and an extra‑long battery life •33/4” long x 1” diameter; includes three AAA batteries PART # 3850‑0082
DESCRIPTION 9‑LED flashlight
3850‑0125
DESCRIPTION Plastic magnetic parts dish Stainless steel magnetic parts dish
SUG. RETAIL $11.95 9.95
12V LED FLASHLIGHT •Need emergency light while out for a ride or you are not sure your vehicle charging system is working right? •Use the 6‑LED flashlight, a reliable, powerful light source that checks battery status and if the vehicle charging system is working correctly •Works great in the workshop to light up those hard‑to‑see places on your bike PART # DESCRIPTION SUG. RETAIL •SAE connector 3807‑0182 12V LED flashlight $24.95 •40” L cable
EMERGENCY LED FLASHLIGHT SUG. RETAIL $11.95
3850‑0068
•Emergency flashlight with three bright LEDs •On/off/flash mode switch •Clips to the top of any 9V battery (battery not included) •Idea for survival packs, tank bags, fanny packs, etc. •Sold in 2‑pack PART # 3850‑0101
ELECTRICAL
DESCRIPTION Emergency LED flashlight (2‑pk.)
SUG. RETAIL $9.95
LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES
BRAKES
3850‑0069
MAGNETIC TRAYS
•Heavy‑duty magnets (two on large tray, one on small tray) with durable rubber coating to help prevent scuffing and scratching •Stainless steel trays •Great for small parts, fasteners and tools •Can be used horizontally, vertically or upside down PART # 3850‑0068 3850‑0069
DESCRIPTION Small; 5.5” dia. x 1.25” deep Large; 5.5” x 9.5” x 1.5” deep
SUG. RETAIL $7.95 13.95
LIGHTED MAGNETIC PICK‑UP •Bright, LED light helps you find lost tools and parts •Retriever extends over 271/2” •Easily retrieves small objects from confined areas •Cushion grip handle PART # 3850‑0073
DESCRIPTION Lighted magnetic pick‑up
SUG. RETAIL $10.95
TANKS & OIL FILTERS TWO‑PIECE MAGNETIC PICK‑UP TOOL AND INSPECTION MIRROR SET
DASHES & GAUGES
•Magnetic pick‑up features a telescoping body that extends to approximately 25” L •Inspection mirror features a telescoping body that extends to approximately 18” L with dual‑swivel mirror mount
FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL
1500
PART # 3850‑0070
DESCRIPTION Pick‑up tool and mirror set
SUG. RETAIL $5.95
PRO MECHANIC ROLLCART •The professional choice for rollcarts •Integrated extra‑large tool trays help you be more organized with bolts and hand tools •Heavy‑duty injection‑molded construction •Padded, dual‑density seat and ergonomic design for comfort •Cup holder keeps even large mugs within easy reach •Available in black •Made in the U.S.A.
•Add comfort and protection to any floor •Six interlocking 20” x 20” mats measure 3/8” thick •Each pack covers 162/3 square feet; borders included •Connect multiple packs for more floor coverage •Water resistant, easy to clean and lightweight
PART # 1113‑12
PART # 3850‑0038
DESCRIPTION Rollcart
SUG. RETAIL $99.95
ANTI‑FATIGUE FLOOR MATS
All part numbers in BLUE are new for 2013.
DESCRIPTION Anti‑fatigue floor mats
SUG. RETAIL $27.95
SECTION •Funnel/ water-repellent pre-filter combination prevents any water from entering your tank during refilling •Also filters out windblown sand and dirt particles down to .005” dia. •Funnel/filter combination even works with premix •Replacement pre-filters sold separately
•Eliminate the mistakes and guesswork of measuring fluids •Tough, translucent polypropylene plastic Ratio Rite measuring cups make for perfect measurements every time •Allows proper pre-mix ratios from 16:1 to 70:1 •Calibrated in cc’s, ounces and pints •Optional lid allows for easier and safer mixing •Lid sold separately PART # DESCRIPTION RRC-1 Measuring cup
WINDSHIELDS & FAIRINGS
FUNNELS
RATIO RITE
SUG. RETAIL $6.95
PART # DESCRIPTION RRL-1 Lid
SUG. RETAIL $2.95
PART # 1030-0011 1030-0012 1030-0013 1030-0014
21
TOURING AUDIO & COMMUNICATION
DESCRIPTION 2-qt. funnel w/ water-repellent pre-filter; 7” dia. 6-qt. funnel w/ water-repellent pre-filter; 9” dia. 2-qt. pre-filter 6-qt. pre-filter
SUG. RETAIL $20.95 23.95 12.95 15.95
LUGGAGE SEATS & SISSY BARS EXHAUST
ULTRA WRENCHES
CAN RACK •Keeps cans and oil bottles right where you want them •For use either in a garage or an enclosed trailer •Made in the U.S.A. PART # M92-21180
DESCRIPTION Can rack
SUG. RETAIL $30.95
•Unique design provides a tight fit 3850-0109 and eliminates the “play” of most adjustable wrenches •Available in (SAE) American Standard (12 sizes) and Metric (18 sizes) •Small enough to fit in your storage compartment or your pocket •Spring loaded adjustments work like a pocket knife and allow the correct size to be used every time •Comes in a sturdy and durable material pouch with belt loop feature PART # DESCRIPTION 3850-0109 Standard
SUG. RETAIL $35.95
PART # DESCRIPTION 3850-0110 Metric
SUG. RETAIL $35.95
FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL
STUBBY TOOL SET •45-piece set includes 1/4” and 3/8” dual-drive ratchet with 72 gear teeth for speed and durability, and 1/4” and 3/8” drive SAE and metric sockets in sizes 5/32” to 3/4” and 4mm to 17mm •Stubby precision wrench has 1” rule on head for precision adjustments •High-torque ratcheting screwdriver includes 5/32”, 3/16” and 1/4” slotted; #1, #2 and #3 Phillips; T-15 and T-20 star; and 1/8” and 1/4” hex bits •Comfortable rubber cushion grip handles •Chrome vanadium steel construction •Also includes adapters and extension •Carrying case keeps tools together for easy, convenient use PART # 3812-0009
LIGHTING
SPEEDKIT™ COMPACT TOOL KIT
DESCRIPTION Stubby tool set
SUG. RETAIL $43.95
•Includes more content than most OEM replacement kits •Fits most OEM storage cavities •Contains 1/2” x 9/16” and 9/16” x 5/8” open end wrenches; 10mm, 3/8” and 7/16” nut drivers; 2-in-1 spark plug wrench; mini 4-in-1, T20 x T25 Torx bit and T27 x T30 Torx bit screwdrivers; hex keys; 10-50 psi tire gauge; 5.5” slip-point pliers •Packed in a zip-up “shave kit” style pouch for easy storage •Made in the U.S.A. PART # 3812-0040
DESCRIPTION For all HD models (except V-Rod)
SUG. RETAIL $32.95
HANDLEBARS, CONTROLS & MIRRORS CABLES
BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS
ROADTECH™ TEARDROP TOOL KIT
FOOTRESTS & LICENSE PLATE FRAMES
MINISET™ COMPACT TOOL KIT
•Comprehensive tool kit designed to fit into teardrop-style tool boxes •Includes mini ratchet and sockets, combination wrenches, locking pliers, adjustable wrench, 6-in-1 screwdriver, LED flashlight, tire gauge and hex and Torx keys •All tools are mechanic-grade
•Powerful, compact ratchet and socket set •Midget 1/4” drive ratchet with 2” extension and eight sockets •Includes hex and Torx bits •Top-grade polished chrome tools •Includes tough carrying case •Made in the U.S.A.
PART # 3812-0023
PART # 3812-0012
DESCRIPTION RoadTech teardrop tool kit
SUG. RETAIL $109.95
All part numbers in BLUE are new for 2013.
DESCRIPTION MiniSet™ compact tool kit
WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS SUG. RETAIL $44.95
COVERS, SECURITY & GENERAL
1501
SECTION
21
WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS
ROADTECH™ H3 TOOL KIT
ECONOKIT® H1 TOOL KIT
•Combines the best features of the popular EconoKIT H1 and MiniSet tool kits into one roll-up pouch •Includes mini ratchet and sockets, combination wrenches, locking pliers, adjustable wrench, 6-in-1 screwdriver, LED flashlight, tire gauge, hex and Torx keys, and much more •All tools are mechanic-grade •Made in the U.S.A.
•A comprehensive roadside kit for the budget-driven rider •Contains five combination wrenches, 8” adjustable wrench, hex and Torx keys, spark plug sockets, 6-in-1 screwdriver, locking pliers, aluminum-bodied flashlight and much more •Packed in a tough, double-panel polyester roll-up pouch that fits into most fork bags •Made in the U.S.A.
PART # 3812-0019
PART # DS-196203
DESCRIPTION RoadTech H3 tool kit
SUG. RETAIL $109.95
DESCRIPTION EconoKIT H1 tool kit
SUG. RETAIL $79.95
ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL
LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES
ECONOKIT® H2 TOOL KIT
ECONOKIT® VR1 TOOL KIT FOR V-RODS
•Highly-quality budget tool kit •Includes five combination wrenches, hex and Torx® keys, spark plug tool, 6-in-1 screwdriver and other roadside items •Packed in a tough, double-panel polyester roll-up pouch •Made in the U.S.A.
•While touted as a metric bike, the V-Rod contains many legacy fractional fasteners (including Torx® fasteners) •VR1 is designed specifically for the V-Rod and Street Rod, with the right combination of tools and roadside items •Packaged in a double-panel 600-denier polyester pouch
PART # DS-196204
PART # 3812-0005
DESCRIPTION EconoKIT H2 tool kit
SUG. RETAIL $49.95
DESCRIPTION For 02-07 V-Rod
SUG. RETAIL $59.95
BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL
1502
OUTBACK’R™ H13 TOOL SET ROLL-UP TOOL POUCH •Designed to handle a wide variety of tools and other items in general use •Includes three wrench pockets, a zip-up mesh pocket, general use straps and a hook-and-loop seamed pocket •Constructed of ballistic nylon •Includes 18 pockets of varying widths at two different heights to accommodate a wide range of contents, two lower pockets with a mesh cover and a hook-andloop closure to hold small or loose items in place •Cordura Plus™ and/or ballistic nylon to handle long-term abuse •Sold each •Made in the U.S.A. PART # DS-196272
DESCRIPTION Roll-up tool pouch bag
SUG. RETAIL $21.95
FOLDING HEX/TORX® KEY SET •Combination key set means you carry just one key set for bikes with both hex and Torx® fasteners •Contains the most commonly used sizes: 5/32”, 3/16”, 1/4”, 5/16”, T-25, T-27 and T-40 •Hardened plastic case with rubber insert •Made in the U.S.A. SUG. PART # DS-196209
DESCRIPTION RETAIL Comb. folding key set $14.95
•Compact and capable multi-tool specifically for Harley-Davidson motorcycles •Inside the fold-up handle are three hex keys (5/32”, 3/16” and 1/4”), two Torx keys (T25/T27), slotted and Phillips screwdrivers, a socket driver with three sockets (3/8”, 7/16” and 1/2”), a 12-point 10mm box wrench for battery terminals, a 9/16” open-end wrench and a spoke wrench •All are permanently attached, except for the three sockets •When not in use, tools fold away inside the handle •Precision-forged from chrome vanadium or carbon steel •9 oz. tool measures 3.5” L •Made in the U.S.A. PART # MTM-2
All part numbers in BLUE are new for 2013.
DESCRIPTION Outback’R H13
SUG. RETAIL $19.95
SECTION
21
WINDSHIELDS & FAIRINGS
M-PACT 2 GLOVES KNUCKLE PROTECTION •Two-ply synthetic leather palm with anatomically die-cut EVA foam-padded impact zones •Streamlined knuckle panel with high-density accordion design reduces impact •Side finger panels feature .5mm synthetic leather with breathable mesh inserts for comfort and flexibility •Finger and thumb grippers made from non-slip rubberized Zeus™ Clarino® improve grip and control •Nonslip rubberized Zeus™ Clarino® palm panel provides grip and longer wear •High-profile, impact-absorbing molded TPR (Thermal Plastic Rubber) finger padding •Hook-and-loop closure with molded TPR pull-tab secures fit MP2-02-008 •Stretch spandex cuff insert provides maximum adjustability while sealing out dirt •Neoprene cuff allows easier access with additional wrist comfort PART # RED MP2-02-008 MP2-02-009 MP2-02-010 MP2-02-011 MP2-02-012
DESCRIPTION Size Size Size Size Size
SUG. RETAIL
8 (Small) 9 (Medium) 10 (Large) 11 (X-large) 12 (XX-large)
$40.95 40.95 40.95 40.95 40.95
PART # BLUE MP2-03-008 MP2-03-009 MP2-03-010 MP2-03-011 MP2-03-012
DESCRIPTION Size Size Size Size Size
8 (Small) 9 (Medium) 10 (Large) 11 (X-large) 12 (XX-large)
SUG. RETAIL $40.95 40.95 40.95 40.95 40.95
TOURING AUDIO & COMMUNICATION LUGGAGE MP2-03-008 PART # BLACK MP2-05-008 MP2-05-009 MP2-05-010 MP2-05-011 MP2-05-012
DESCRIPTION Size Size Size Size Size
8 (Small) 9 (Medium) 10 (Large) 11 (X-large) 12 (XX-large)
MP2-05-008 SUG. RETAIL $40.95 40.95 40.95 40.95 40.95
SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE
COLD WEATHER FLEECE UTILITY GLOVES
GASKETS & SEALS
•Heavyweight fleece shell with wind-resistant barrier •Rubberized water-repellent shell •Double reinforced thumb and fingertips •Hook-and-loop closure
•Comfort and warmth combine in this great-fitting fleece work glove •Designed for light-duty work around the home or garage, the Cold Weather Fleece Utility Glove provides just the right amount of protection between your hands and the cooler temperatures outside •Hook-and-loop closure •Heavyweight fleece shell •Rubberized palm and finger panels
•Reflective strip panel and high-visibility Day-glow two-way stretch spandex •The glove also features a Clarino® synthetic leather palm, Lycra® panels between the fingers, and two-ply fingertips and thumb to reduce wear and increase protection •Imported
PART # 3350-0070 3350-0071 3350-0072 3350-0073 3350-0074
PART # 3350-0084 3350-0085 3350-0086 3350-0087 3350-0088
PART # 3350-0075 3350-0076 3350-0077 3350-0078 3350-0079
COLDWEATHER WIND RESISTANT GLOVES
DESCRIPTION Size 8 (Small) Size 9 (Medium) Size 10 (Large) Size 11 (X-large) Size 12 (XX-large)
SUG. RETAIL $24.95 24.95 24.95 24.95 24.95
SIZE Size 8 (Small) Size 9 (Medium) Size 10 (Large) Size 11 (X-large) Size 12 (XX-large)
SUG. RETAIL $17.95 17.95 17.95 17.95 17.95
THE SAFETY FASTFIT® HIGH VISIBILITY
•Redesigned fingertip pattern reduces seams and enhances fingertip sensitivity •Lycra® panels between fingers for added comfort and mobility •Narrower elastic cuff for added comfort •Ultra-thin TPR (Thermal Plastic Rubber) pull-tab with hook-and-loop closure provides comfort and adjustability •Supple, breathable, durable Clarino® palm provides firm grip •Dual-layered fingertips and thumb for reduced wear and increased protection •Two-way stretch spandex padded top features form-fitting elasticity •Smooth surface thumb and index finger point of contact improves handling •Concealed interior seam stitching prevents snagging •Index finger knuckle reinforcement band for added strength and protection
Size Size Size Size Size
8 (Small) 9 (Medium) 10 (Large) 11 (X-large) 12 (XX-large)
Size Size Size Size
8 (Small) 9 (Medium) 10 (Large) 11 (X-large)
SUG. RETAIL $24.95 24.95 24.95 24.95 24.95 24.95 24.95 24.95 24.95
PART # BLUE (CONT) MG03-012 BLACK MG05-008 MG05-009 MG05-010 MG05-011 MG05-012 MOSSY OAK 3350-0091 3350-0092
HANDLEBARS, CONTROLS & MIRRORS CABLES
BRAKES
MG02-008
ORIGINAL MECHANIX GLOVES
DESCRIPTION
SUG. RETAIL $16.95 16.95 16.95 16.95 16.95
LIGHTING
3350-0091
MG03-008
PART # RED MG02-008 MG02-009 MG02-010 MG02-011 MG02-012 BLUE MG03-008 MG03-009 MG03-010 MG03-011
DESCRIPTION Size 8 (Small) Size 9 (Medium) Size 10 (Large) Size 11 (X-large) Size 12 (XX-large)
ELECTRICAL
TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS MG05-008 DESCRIPTION Size 12 (XX-large) Size Size Size Size Size
8 (Small) 9 (Medium) 10 (Large) 11 (X-large) 12 (XX-large)
Size 8 (Small) Size 9 (Medium)
SUG. RETAIL $24.95 24.95 24.95 24.95 24.95 24.95 26.95 26.95
All part numbers in BLUE are new for 2013.
3350-0096
PART # DESCRIPTION MOSSY OAK (CONT) 3350-0093 Size 10 (Large) 3350-0094 Size 11 (X-large) 3350-0095 Size 12 (XX-large) SAFETY YELLOW 3350-0096 Size 8 (Small) 3350-0097 Size 9 (Medium) 3350-0098 Size 10 (Large) 3350-0099 Size 11 (X-large) 3350-0100 Size 12 (XX-large)
SUG. RETAIL $26.95 26.95 26.95 27.95 27.95 27.95 27.95 27.95
FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL
1503
SECTION
21 MFF-03-008
WINDSHIELDS & FAIRINGS FASTFIT® GLOVES TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS
•Affordable, versatile all-purpose design •Easy-on, easy-off elastic cuff •Lycra® insert panels between fingers •Ultra-snug, form-fitting two-way stretch spandex construction •Durable, breathable synthetic leather palm •Reinforced synthetic leather thumb and fingertips •Smooth surface thumb and index finger contact points •Handy metal hanging grommet •Machine washable PART # RED MFF-02-008 MFF-02-009 MFF-02-010 MFF-02-011 MFF-02-012
DESCRIPTION Size Size Size Size Size
MFF-02-008
SUG. RETAIL
8 (Small) 9 (Medium) 10 (Large) 11 (X-large) 12 (XX-large)
MFF-05-008
MFF-03-008
$15.95 15.95 15.95 15.95 15.95
PART # BLUE MFF-03-008 MFF-03-009 MFF-03-010 MFF-03-011 MFF-03-012
DESCRIPTION Size Size Size Size Size
8 (Small) 9 (Medium) 10 (Large) 11 (X-large) 12 (XX-large)
ENGINE
NITRILE MECHANIC GLOVES
HANDLEBARS, CONTROLS & MIRRORS
DESCRIPTION Size Size Size Size Size
8 (Small) 9 (Medium) 10 (Large) 11 (X-large) 12 (XX-large)
SUG. RETAIL $15.95 15.95 15.95 15.95 15.95
•Superior puncture-, tear- and chemicalresistance with excellent dexterity •Fully textured finish provides excellent grip when handling wet tools and equipment •Polymer coating on the surface keeps hands comfortable and cool during extended use •Powder-free to minimize the risk of developing latex protein residuerelated allergies •12” cuff length protects wrists and forearms •14 mil (fingers and palm) for maximum chemical resistance •Unique packaging designed with yellow colorcoded logo •50 gloves per container
GASKETS & SEALS
LIGHTING
$15.95 15.95 15.95 15.95 15.95
PART # BLACK MFF-05-008 MFF-05-009 MFF-05-010 MFF-05-011 MFF-05-012
LATEX GLOVES
TRANSMISSION & DRIVELINE
ELECTRICAL
SUG. RETAIL
•5-mil thick powder free Nitrile mechanic gloves •Provide maximum tear resistance •Nitrile material is resistant to most solvents and chemicals •Safeguard against dirt, grime and harmful chemicals •Used by top mechanics and factory teams •Sold in packs of 100 PART # 3350-0082
DESCRIPTION Nitrile gloves
SUG. RETAIL $24.95
PART # 3350-0006 3350-0007
DESCRIPTION Large X-large
SUG. RETAIL $39.95 39.95
CABLES
BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL
1504
NITRILE GLOVES •Superior puncture-, tearand chemical-resistance with excellent dexterity •100% latex-free design eliminates potential allergic reactions to latex proteins •Textured surface provides strong grip for both wet and dry applications •Available with 8 mil or 5 mil thickness in fingers and palm •Unique packaging designed with blue color-coded logo PART # 8 MIL (50-PK.) 3350-0080 3350-0081 5 MIL (100-PK.) 3350-0004 3350-0005
DESCRIPTION
TECHNICIAN GLOVES
SUG. RETAIL
Large X-large
$22.95 22.95
Large X-large
20.95 20.95
•Blend of function and protection •Gloves are designed for a tight but comfortable fit for better tactile feel •Nitrile coated palm improves grip and protects hands from oil, battery acid and other chemicals commonly found in a shop environment •Nylon knit extended cuff provides comfort and breathability •Flexible enough to easily use writing instruments or punch keyboards, yet tough enough to handle small to large fasteners without the frustration of tearing those thinner glove types PART # 3350-0089 3350-0090
SIZE Small/medium Large/X-large
SUG. RETAIL $3.95 3.95
All part numbers in BLUE are new for 2013.
SHOP APRON •1000-denier Belcord fabric construction provides the ultimate in protection •Extra-wide pockets with hook-and-loop flaps secure your tools •Adjustable neck and waist straps for a perfect fit •Easy-access pen pocket, front and center PART # MG05-600
DESCRIPTION Mechanix apron
SUG. RETAIL $24.95
Commander un accessoire ou une pièce chez US Dream Import Vous avez vu une pièce ou un accessoire : -1) Notez [Nom du catalogue] [Page du catalogue] [Référence article] et [Nom de l'article (en anglais ou en français)], -2) Envoyez-moi un E-Mail avec ces informations à info@usdream.fr en précisant dans l'objet : "Date + Devis + [Référence article] + [Nom de l'article (en anglais ou en français)] et éventuellement votre numéro de téléphone de contact" Un E-Mail vous sera adressé sous 24 h avec la disponibilité de l'article, le prix(*) livré chez vous et un lien de paiement direct, Vous n'avez plus qu'à procéder au règlement et la commande de votre accessoire sera effectuée immédiatement,
Et votre Accessoire sera chez vous dans 6 jours ! (*) Le prix du devis peut être inférieur au prix que vous avez vu, Exemple : votre accessoire est vendu 157,99 USD sur un eBook et est disponible à 103,99 USD sur un autre FlipBook de US Dream Import - Le devis envoyé sera toujours au meilleur prix disponible ! (*) Par un procédé de croisement des références disponibles, Pour information les prix indiqués sur les catalogues US sont toujours HT et compte tenu des frais de transport par avion, pour 103,99 USD sur un catalogue US vous payerez environ le même montant HT, soit 105,00 Euros (HT) + TVA (20%) + Tarif poste en France,
US Dream Import spécialiste importation de pièces et accessoires
USA Import en direct des USA depuis 1992
Contents Bibliotheque FlipBook Drag Specialties FatBook 2013 Drag Specialties FatBook 2013 Update
Accessoires et Pièces Harley-Davidson Importés par US Dream Import en France Site : http://www.usdream.fr/ Hotline : +33(0)6 60 06 46 59 E-Mail : info@usdream.fr
Windshields.........................................................6-48.. Touring...............................................................49-86 Audio.................................................................87-122... luggAge..........................................................123-195.... seATs.&.sissybArs.........................................196-334.... exhAusT...........................................................335-476..... Fuel/Air.sysTems..........................................477-555..... engine.............................................................556-629.... TrAnsmission.&.driveline..........................630-714... gAskeTs.&.seAls.............................................715-742..... elecTricAl......................................................743-813..... lighTing...........................................................814-897.... hAndlebArs,conTrols.&.mirrors.........898-1003.... cAbles.........................................................1004-1055.... brAkes.........................................................1056-1128..... TAnks.&.oil.FilTers...................................1129-1172...... dAshes.&.gAuges......................................1173-1206...... FrAmes,.suspension.&.Fenders...........1207-1285.... FooTresTs.&.license.plATe.FrAmes.....1286-1352.... Wheels.&.Axles.........................................1353-1383. hArdWAre,.chemicAls.&.Tools.............1384-1504 covers,.securiTy.&.generAl.................1505-1560...... cross.reFerence.chArT........................1561-1578... Quick.reFerence.chArT.........................1579-1581.... index............................................................1582-1618
NOUVEAU : Special Up Date 2013 FatBook Drag Specialties Harley-Davidson
CLIQUEZ ICI Pièces et Accessoires dédié Harley-Davidson Importés par US Dream Import en France
NOTE:
for your tire needs please see our all-new
TIRE CATALOG. It’s packed with all the tires, tubes, tools and accessories from the industry’s top vendors. We’ve pulled it all out of our other catalogs and dedicated an entire catalog to nothing but tires. No more switching between catalogs — THE TIRE CATALOG HAS IT ALL.