Node Quick Start Guide iOS

Page 1

™

Quick Start Guide iOS www.variableinc.com

1

™ Contents Welcome to NODE+

3

About NODE+

4

Specifications

5

Sensor Capabilities Swapping Sensor Modules

2

7-8 9-10

Powering Down NODE+

13-16

Testing NODE+motion

17-23

Testing the +therma module

24-28

Testing the +clima module

29-33

Testing the +luma module

34-36

Testing the +chroma module

37-43

Testing the +oxa module

44-49

www.variableinc.com

Welcome Thank you for purchasing NODE+, the handheld modular sensor platform with an incredible variety of potential applications. We hope that you enjoy our product as much as we enjoyed designing it. Please visit our website, for more information, news, and updates.

Contact support@variableinc.com

Visit variableinc.com in your browser fo more information, news and updates!

www.variableinc.com

3

About

™

NODE+ is a patent-pending wireless sensor platform capable of measuring, recording, and transmitting a wide array of sensory data. NODE+ uses the latest low energy BluetoothÂŽ standard to communicate sensor data to all current Apple devices. Every NODE+ device contains a sensor array called +Motion, capable of measuring nine degrees of motion (a 9D0FIMU), which allows NODE+ to accurately measure its orientation and movement. This is made possible through the combination of a three-axis gyroscope, a three axis accelerometer, and a three-axis magnetometer. Two module ports, into which a variety of sensor modules can be inserted, provide the device with expandable capabilities beyond the 9D0F functionality offered by NODE+Motion.

4

www.variableinc.com

Package Contents Your NODE+ wireless sensor package includes: 1. One NODE+ wireless sensor device 2. USB to Micro-USB Charging Device 3. Terms of Use Agreement 4. One Mini Screwdriver NODE+ sensor modules sold separately.

www.variableinc.com

5

Specifications Dimensions: NODE+ without Modules Size: 1 inch (25.4mm) diameter, 3.26 inch (82.7 mm) length Power: Battery: 700mAh lithium ion, Battery Life: 12 hr. continuous use, 30+ days standby, Micro-USB Charging

Communications: Bluetooth速 4.0 Smart, USB data communications, 256-bit encryption engine

6

www.variableinc.com

Sensor Capabilities: ™

Motion / platform built-in feature 3-axis accelerometer: up to +/-8g range, 0.061 resolution 3-axis magnetometer: up to +/-8 gauss range, 0.04 milli-gauss resolution 3-axis gyroscope: up to +/-2000 degrees-per-sec, 0.061 degrees-per-sec resolution 9-degrees-of-freedom orientation guide ™

Clima / Sensor Module / Atmospheric Sensor Barometric Pressure: -500 to +9000 meter above sea level range, 0.25 meter resolution Ambient Temperature: -40 to 85℃, 0.1℃ resolution Humidity: 10-90% relative humidity, +/-3% accuracy Light: 0.25lx (full moon light at night) to 16,000lx (full day light), 0.25lx resolution ™

Therma / Sensor Module / Surface Temperature Sensor -70 to 380℃, Range of 0-3 meters, 12 degree field-of-view, 0.01℃ resolution, 0.1℃ accuracy over time www.variableinc.com

7

Sensor Capabilities: ™

Oxa / Sensor Module Series / Gas Sensor Series Stable electrochemical gas sensor for both ambient and toxic level gas detection. CO - Carbon Monoxide, NO - Nitric Oxide, NO2 - Nitrogen Dioxide, Cl2 - Chlorine Gas, SO2 - Sulfur Dioxide, H2S - Hydrogen Sulfide ™

Chroma / Sensor Module / Color Matching Sensor Accurate sRGB, CIE L*A*b*, and Hex values, regardless of ambient light. Light Source: LEDs, Reference white for calibration Measurement aperture Size: 1 mm diameter Chroma device to device average consistency < 0.8 ∆E. (Measured under temperature: 21°C ±2°C across 50 color standards) ™

Luma / Sensor Module / Programmable LED Flashlight Weight: 1.6oz (attached to NODE platform) 8 5000K white LEwDs, 56 cd intensity over 50,000 hour bulb life

Swapping Sensor Modules Swapping Sensors Additional modules can be interchanged with the included small Phillips screwdriver as follows: Remove In this example, we will swap the +clima module with the +luma module. With your NODE+ App disconnected, remove the two screws securing the +clima module to your NODE+ using the mini screwdriver included in your NODE+ package, and then remove the module by gently pulling it off.

www.variableinc.com

9

Swapping Sensor Modules

2

Remove

3

Install

Swapping Sensors Install the +luma module by inserting the male module plug into the female port on your NODE+. Be careful to align the connection properly; the sensor module should slide in smoothly. Re-insert the screws removed in the previous step. Do not over tighten screws.

Powering Down

™

Powering Down To power down NODE+, press and hold the power button for 3 seconds. Press and hold for 10 seconds for a hard reset. To check if NODE+ is in standby mode, briefly press the power button. Two blue rings indicate NODE+ is powered on but in standby. (No shake to wake feature currently) Press and Hold 3 Seconds

www.variableinc.com

11

™

Explore

™

Download the App The NODE+ device with motion sensor will be shipped with USB charging cord. Additional sensor modules are sold separately,

Download To download the App: Search the iTunes App Store for:

Launch the myNODE App

NODE Variable Technologies

Ensure that you have Bluetooth®

Scan this QR code with your iOS device to be directed

enabled on your iOS device. Visit “settings” on

to the myNODE App page in iTunes. This app will give

your mobile device to check Bluetooth®.

www.variableinc.com

you access to all of our other NODE+ apps.

13

Getting Started

™

Making real motion digital, and digital motion real. For fitness, logistics, vibration analysis, and gaming, motion is only as good as it is useful. NODE+motion measures nine degrees of motion with a 9DOF IMU, which allows NODE+ to accurately measure its orientation and movement. This is made possible through the combination of a three-axis gyroscope, a three-axis accelerometer, and a three-axis magnetometer.

1 Power Lights flash blue when NODE+ is turned on. To get started, locate and press the power button on your NODE+ device. The device should beep and flash blue to let you know that it has been turned on.

™

Testing myNODE functionality The myNODE App will launch into the device selection screen which displays all NODE+ devices within range of your iOS device. Devices are listed by NODE+, followed by a 12-digit serial number (located on the outside of box). Tap on the icon for your NODE+ device to connect (you can slide from left to right to view all NODEs within range of you smart device).

www.variableinc.com

2

Tap

15

™

Testing myNODE functionality Once connected, myNODE allows you to view device info (battery level, signal strength, serial numbers, firmware version, etc), manage device settings (data logging, quiet mode, name, etc),

Re-name NODE

and provides access to our other NODE+ apps.

Connected Modules

Naming

Battery Strength

Clicking on name will allow you to re-name

Signal Strength

your NODE+, making it easier to recognize.

Data Logging

Data Logging

Quiet Mode

Clicking data logging will allow you to manage

Firmware Version Serial Number

your stored reading settings within each NODE+ app. There, you can enable/disable stored readings, and erase all stored readings. Quiet Mode

3

Tap to access our other NODE+ Apps.

Clicking on quiet mode will allow you to disable NODE+ device sounds. 16

www.variableinc.com

™

™

18

www.variableinc.com

™

Testing Node’s motion functionality 1 Menu

accelerometer (g)

gyroscope (dps) After the first pairing, NODE+ will auto connect to the N+motion app. Choose your NODE+ serial number or custom name to begin streaming data. Devices are listed

magnetometer (G)

by NODE+, followed by a 12-digit serial number (located on the outside of box). Once connected, N+motion will begin taking motion data. Try tilting your NODE+ from side to side. Notice the changes in the accelerometer, gyroscope, and

x

z

y

2 Record

x - axis y - axis z - axis

magnetometer readings. www.variableinc.com

19

™

Testing Node’s motion functionality Tap the Menu button in the upper left corner to explore N+motion’s other capabilities, or press

3 Tilt

record to begin recording and saving N+motion data.

Tilt your NODE+ side to

3D View

side or left to right to

Clicking on 3D View will access the NODE+cube. This demo provides an example of N+motion’s motion tracking capabilities.

test NODE+ motion’s orientation, and motion tracking capabilities. NODE+ senses and records the data obtained by your movements.

20

www.variableinc.com

™

Testing Node’s motion functionality

x - axis y - axis z - axis

You will be presented with a view displaying three graphs. Tap the record button the create a recording of the data being received.

accelerometer (g) The top graph displays accelerometer readings. Try shaking your NODE+ to see the gyroscope (dps)

reaction on this graph. The middle graph displays gyroscope readings. x

Try rotating your NODE+.

z

y magnetometer (G)

The bottom graph displays magnetometer readings. Changes in orientation of your device relative to the earth’s magnetic field (or nearby devices) will cause changes in the data

4

Tap

displayed on this graph. www.variableinc.com

21

™

Testing Node’s Motion Functionality By clicking the Recordings tab in the menu, you can access your saved recordings, rename files, and send the saved data via email.

6

Tap

Access Recordings

Exporting CSV/ Rename files You can rename and organize saved data readings, and send data on the go!

22

www.variableinc.com

™

www.variableinc.com

23

™

24

www.variableinc.com

™

www.variableinc.com

25

™

Testing the therma module 1 Menu

After the first pairing, NODE+ will auto connect to the N+therma app. Choose your NODE+ serial number or custom name to begin streaming data. Devices are listed by NODE+, followed by a 12-digit serial number (located on the outside of box).

2 Record

Once connected, N+therma will begin taking temperature data. Point your NODE+’s red aiming lights toward an object to read it’s temperature.

26

www.variableinc.com

™

Testing the therma module Node+ therma allows you to customize your data readings from the settings screen. From

3 Settings

this screen you can connect and disconnect

The settings screen

your NODE+, adjust the temperature unit, turn

allows you to connect

LEDs on and off, and adjust emissivity and

and disconnect your

choose emissivity setting.

NODE+ , choose a temperature unit, turn LEDs on and off and adjust and choose an emissivity setting.

www.variableinc.com

27

™

Testing the therma module By clicking the Recordings tab in the menu, you can access your saved recordings, rename files, and send the saved data via email.

6

Tap

Access Recordings

Exporting CSV/ Rename files You can rename and organize saved data readings, and send data on the go!

28

www.variableinc.com

™

™

30

www.variableinc.com

™

Testing the clima module 1 Menu

After the first pairing, NODE+ will auto connect to the N+clima app. Choose your NODE+ serial number or custom name to begin streaming data. Devices are listed by NODE+, followed by a 12-digit serial number (located on the outside of box).

2 Record

Once connected, N+clima will begin taking pressure, light, humidity and temperature data. Place your NODE+ in your chosen area and begin recording atmospheric data. www.variableinc.com

31

™

Testing the clima module By clicking the Recordings tab in the menu, you can access your saved recordings, rename files, and send the saved data via email.

3

Tap

Access Recordings

Exporting CSV / Rename files You can rename and organize saved data readings, and send data on the go!

32

www.variableinc.com

™

Testing the clima module Node+clima allows you to customize your data readings from the settings screen. From

3 Settings

this screen you can connect or disconnect

The settings screen

your NODE+, adjust the temperature unit,

allows you to connect

light unit, and pressure units.

or disconnect your NODE+ , choose a temperature unit, light unit, or pressure unit.

www.variableinc.com

33

™

34

www.variableinc.com

™

www.variableinc.com

35

™

Testing the luma module 1 Menu

After the first pairing, NODE+ will auto connect to the N+luma app. Choose your NODE+ serial number or custom name to begin streaming data. Devices are listed by NODE+, followed by a 12-digit serial number (located on the outside of box). Once connected, you can program N+luma’s LEDs by adjusting speed, brightness, flash, sos, and spin settings. 36

www.variableinc.com

™

™

™

Testing the chroma module

After the first pairing, NODE+ will auto connect to the N+chroma app. Choose your NODE+ serial number or custom name to begin streaming data. Devices are listed by NODE+, followed by a 12-digit serial number (located on the outside of box).

1 collections

options 2

Once connected, place your N+chroma color sensor module onto the flat surface you would like to scan, and press the scan color button to begin reading color. www.variableinc.com

39

™

Testing the chroma module You will be presented with a view of N+ chroma’s Single Color Scan display.

Tap the Options button to change Chroma’s

Now, place your NODE+ flat against the

settings or connect to

colored surface you’d like to scan, and press

another NODE device.

the scan color button. Your NODE+chroma screen will display an image of the scanned color, along with RGB, Hex, and Lab color readings. 3 Tap 4 Options

40

www.variableinc.com

™

Testing the chroma module You will be presented with a menu displaying Pair to NODE+, Calibration, View Mode, and Reference Light Options.

5

Tap

Pair to NODE

The Calibrate Option allows you to calibrate

Calibration

your NODE+chroma sensor.

View Mode

The View Mode Option allows you to toggle

Reference Light

between Single Color and Color Compare views. The Reference Light Option allows you to select a Reference Light color standard for your N+chroma readings.

www.variableinc.com

41

™

Testing the chroma module Now, Tap the View Mode Button at the bottom of your screen to toggle to the Compare Color view. The Reference Light option will allow you to select a Reference Light color standard, (sRGB or Adobe Lab) for your +chroma readings.

42

6 Tap 7 Tap

www.variableinc.com

™

Testing the chroma module You will be presented with a view of N+chroma’s Color Compare display. Now, place your NODE+ flat against the first colored surface you’d like to scan, and press the scan color button on the left of your screen. Repeat the same process with the color you would like to compare it to. Your NODE+chroma screen will display

Tap 9

8 Tap

side-by-side images of the scanned colors, along with a percentage match of the two scanned colors.

www.variableinc.com

43

™

44

www.variableinc.com

™

www.variableinc.com

45

™

Testing the oxa module 1 Menu

After the first pairing, NODE+ will auto connect to the N+oxa app. Choose your NODE+ serial number or custom name to begin streaming data. Devices are listed by NODE+, followed by a 12-digit serial number (located on the

2 Record

outside of box). Once connected, N+ oxa will begin taking gas readings from the specific N+oxa gas sensor module you have attached to your NODE+. 46

www.variableinc.com

™

Testing the oxa module By clicking the Recordings tab in the menu, you can access your saved recordings, rename files, and send the saved data via email.

3

Tap

Access Recordings

Exporting CSV / Rename files You can rename and organize saved data readings, and send data on the go!

www.variableinc.com

47

™

Testing the oxa module To calibrate N+oxa, tap calculate baseline. Calibrating oxa sensors will take approximately 20 minutes. Do not exit the screen during this

3

Tap

Baseline

process. This allows N+oxa to generate accurate gas level readings for Carbon Monoxide, Nitric Oxide, Nitrogen Dioxide, Chlorine Gas, Sulfur Dioxide, or Hydrogen Sulfide.

48

www.variableinc.com

™

Testing the oxa module Node+oxa allows you to customize your data readings from the settings screen.

3 Settings

From this screen you connect or disconnect

The settings screen

your NODE+, and change N+oxa’s reading

allows you to connect

unit (raw or ppm).

or disconnect your NODE+, and change your reading unit.

www.variableinc.com

49

Need more help? Contact Us: Variable,Inc. 100 Cherokee Blvd. Chattanooga, TN 37405 Customer Service 1.888.568.8588 ext 8876

Š 2013 Variable, Inc. All rights reserved. Variable, the Variable logo, NODE+, the NODE+ logo, +chroma, +therma, +oxa, +clima, +luma, are trademarks of Variable, Inc., registered in the U.S. and other countries. The BluetoothŽ word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. Apple iOS and iTunes Store are service marks of Apple Inc., registered in the U.S. and other countries. Any use of such marks by Variable, Inc. is under license.Other company and product names mentioned herein may be trademarks of their respective companies.

50

Any mention of third-party products or mobile applications is for informational purposes only and constitutes neither an endorsement nor a recommendation. Variable assumes no responsibility with regard to the performance or use of these products. All understandings, agreements, or warranties, if any, take place directly between the vendors and the prospective users. Every effort has been made to ensure that the information in this manual is accurate. Variable is not responsible for printing or clerical errors. 200-0001/2013-10

www.variableinc.com

Turn static files into dynamic content formats.

Create a flipbook
Issuu converts static files into: digital portfolios, online yearbooks, online catalogs, digital photo albums and more. Sign up and create your flipbook.