Hewitt Docks, Lifts & Pontoon Legs - Accessories Catalog

Scantoviewdigitally

Hewitt Accessories – tailor-made appearance and performance.

Hewitt Manufacturing produces many different types of docks and lifts to satisfy individual needs, but that’s only the beginning. Hewitt accessories offer even greater flexibility with a wide range of equipment designed to simplify installation, automate operation, improve accessibility, enhance appearance, add functionality and provide extra protection for you and your watercraft. While the products shown in this catalog are specifically selected and made to complement Hewitt Lifts and Docks, many may be used in combination with other brands. Either way, you can be assured that when you choose Hewitt accessories, you are getting the same high-quality materials and workmanship that make Hewitt Lifts and Docks the most durable designs in the industry.

Benches, Umbrellas and Patio Chairs

Indicates this product is shippable via UPS from your local dealer or visit us online at www.hewittrad.com.

Free Standing Bench

Mounts to any flat surface. All aluminum brackets. Shown with aluminum planks. (Umbrella not included.)

Aluminum

4’ panel (2” x 6”) bench kit & bolts 8’ panel (2” x 6”) bench kit & bolts (White) part# D1BFA4A (White) part# D1BFA8A

4’ panel (2” x 6”) bench kit & bolts 8’ panel (2” x 6”) bench kit & bolts (Beige) part# D1BFA4AB (Beige) part# D1BFA8AB

4’ panel (2” x 6”) bench kit & bolts

8’ panel (2” x 6”) bench kit & bolts (Woodgrain) part# D1BFA4W (Woodgrain) part# D1BFA8W

Bench Bracket Kit (w/bolts, no wood) part# D1BFA

Bench Umbrella

Aluminum construction, mounts to back of bench. Used to shade the sitting area of your bench, 32” of adjustment.

4’ part# D1U4 color

8’ part# D1U8 color

Defender Colors

DEFENDER

19 oz marine fabric made from combining fabric with a textured marine grade vinyl. Waterproof and has a fluorocarbon finish for UV, water, mildew and fade resistance. Choose from 11 popular colors. Other colors available through special order. Fabric

Standard Vinyl Canopy Colors

Our 16 oz nylon with 9 x 9 reinforced vinyl canopies are durable, waterproof and UV resistant to prevent premature fading. Randomly textured finish in 7 popular colors.

Bench Armrest with Cup Holder

Large 5” x 13-1/2” molded armrest has deep cup holder that is rotational molded, and can hold up to a 3-1/2” diameter cup.

part# D1BAR

Bench Seat Options

Available in three colors.

30” Table

Care-free, durable and classic are just a few words that come to mind when you see this large low-maintenance all aluminum powder-coated mesh table. Includes hole for an optional umbrella and a bracket for mounting table to dock.

part# DPTABLER

part# DPTABLEC

part# DPTABLEW

part# DTABLEU

Table Only part# DPTABLE

Patio Chair

Chair features an powder coated all-aluminum, adjustable swivel rocker mechanism that offers an exciting way to experience comfort and relaxation. Chair is wrapped with two layers of fabric making this chair extremely durable and very comfortable. Includes bracket for mounting chair to dock.

part# DPCHAIRR

part# DPCHAIRC

part# DPCHAIRW

part# DCHAIRU

Chair Only - part# DPCHAIR

Offset Bench

All aluminum construction, Hewitt Benches are unique when mounted to the dock. The bench is over the water, not on the deck, leaving that important deck space.

* Armrest/Cup Holders are sold seperately, see page 2.

4’ Aluminum Bench White part# D1BA4A part# D6BA4A part# D1BCA4A part# D1BUA4A Kit & bolts Beige part# D1BA4AB part# D6BA4AB part# D1BCA4AB part# D1BUA4AB Woodgrain part# D1BA4W part# D6BA4W part# D1BCA4W part# D1BUA4AW

8’ Aluminum Bench White part# D1BA8A part# D6BA8A part# D1BCA8A part# D1BUA8A Kit & bolts Beige part# D1BA8AB part# D6BA8AB part# D1BCA8AB part# D1BUA8AB Woodgrain part# D1BA8W part# D6BA8W part# D1BCA8W part# D1BUA8AW

Bench Bracket part# D1BA part# D6BA N/A N/A With bolts, no wood

Bench Bracket only N/A N/A part# DCBB part# DUBB

Universal Dock and Patio Bench

Maintenance-free, weatherproof dock/ outdoor benches can be utilized in virtually any outdoor space within both residential and commercial locations such as: home, cabin, parks, golf courses, marinas, schools and more. Pebble Beach color.

4’ Bench: 52”Wx37”Hx27”D. 66lbs. part# DF300014

5’ Bench: 64”Wx37”Hx27”D. 81lbs. part# DF301092

6’ Bench: 76”Wx37”Hx27”D. 96lbs. part# DF300016

Point

• Rotational molded construction

• High-impact polyethylene

• Weatherproof and UV Resistant

• Molded-in beverage holders

• Molded-in anchoring compartments

Universal Storage Box

Rotationally molded with high-impact polyethylene and maximum UV protection. Pebble Beach Textured Finish. (Fits 5’ Bench only)

part# DF301093

R V S C F

Anchoring

Dock Cleats

Indicates this product is shippable via UPS from your local dealer or visit us online at www.hewittrad.com.

Dock Cleat Seat

Rugged, folding tie-down. Bolts to any flat surface.

Tensile Strength: 27,000 PSI

Rated for: 1/2” Rope

Mounting Hardware: 1/4” Lag Screw 1/4” Hex Head (not included)

Black part# D1CSB

White part# D1CSW

S-Cleat

Secure your boat quickly and easily with the 10” cast-aluminum “S” dock cleat. Made of corrosion-resistant aluminum for enhanced durability. Oversized horns make it easy to loop large ropes. “S” cleat has recessed mounting holes to reduce the chance of line snag and fray.

10” (Volume Pack 40 pcs) part# D1CS10

12” (Volume Pack 40 pcs) part# D1CS12

15” (Volume Pack 20 pcs) part# D1CS15

(Requires two bolts, nuts and 4 washers per cleat.)

7/16” x 3” part# NB7163G Used with deck thickness up to 1/2”

Nylon Dock Cleat

Cleats are injection molded in black nylon for long-lasting strength and durability.

6” Volume Pack 50 pcs part# D1CN6 (Requires two bolts, nuts and washers per cleat)

1/4” x 2-1/2” SS Carriage Bolt part# NB14212C used with deck thickness up to 1-1/4”

1/4” x 3-1/2” SS Carriage Bolt part# NB14312C used with deck thickness up to 2-1/4”

1/4” Coated Nut part# NN14S

¼” SS Flat Washer part# NW14FL

8” Volume Pack 50 pcs part# D1CN8 (Requires two bolts, nuts and washers per cleat.)

5/16” x 2-1/2” SS Carriage Bolt part# NB516212C

Used with deck thickness up to 1/2”.

5/16” x 3-1/2” SS Carriage Bolt part# NB516312C

Used with deck thickness up to 1-1/2”.

5/16” Brass Nut part# NN516B

5/16” SS Flat Washer part# NW516FL

7/16” x 4” part# NB7164G Used with deck thickness up to 1-1/2”

7/16 Nut part# NN716S

½” SS flat washer part# NW12FL

Dock Cleat Seat Hardware

Provides a simple yet secure way to mount your cleats to your dock. Used with deck thickness up to 2”. (Mounts 4 cleats)

part# D1CSH

Volume Pack 20 pcs

Decking Backer

Reinforcement backer plate used under the deck of dock to help secure dock ladders and cleats. Fits up to 1-1/4” tube.

Backer part# D1DDB

Classic Dock Backer Plate

Under dock support plate for increased stability mounting accessories to dock.

part# DCBP5

Two recommended for freestanding bench and ladder (Not tip-over ladder hinge).

part# DCBP10

Recommended for cleats.

6” Aluminum Cleat

Heavy-duty commercial cleat for use on inland waters with boats up to 18’.

Cast part# D1CA6C White part# D1CA6W Black part# D1CA6B

(Requires two bolts, nuts and washers per cleat.)

3/8” x 1-1/2” SS Hex Bolt part# NB38112G

Used with deck thickness up to 3/4”.

3/8” x 2” FT SS Hex Bolt part# NB382FT

Used with deck thickness up to 1-1/4”.

3/8”Brass Nut part# NN38S

3/8”SS Flat Washer part# NW38FL

Galvanized Cleats

Heavy-duty galvanized cleat in three sizes (Bolts not included).

8” Volume Pack 100 pcs part# D1CG8

(Requires two bolts, nuts and washers per cleat.)

5/16” x 2-1/2” SS Hex Bolt part# NB516212G

Used with deck thickness up to 3/4”.

5/16” x 3-1/2” SS Hex Bolt part# NB516312G

Used with deck thickness up to 1-3/4”.

5/16” Brass Nut part# NN516B

5/16” SS Flat Washer part# NW516FL

10” Volume Pack 60 pcs part# D1CG10 (Requires two bolts, nuts and washers per cleat.)

3/8” x 3” SS Hex Bolt part# NB383G

Used with deck thickness up to 3/4”.

3/8” x 4” SS Hex Bolt part# NB384G

Mini Cleat

3” mini cleat’s compact design is excellent for tieing up canoes, chairs to the docks and for mooring small fishing boats.

White part# D1CMW Black part# D1CMB Cast part# D1CMC Volume Pack 200 pcs

Used with deck thickness up to 1-3/4”.

3/8” Brass Nut part# NN38S

3/8” SS Flat Washer part# NW38FL

part# D1CSH Volume Pack 20 pcs Kit includes hardware for mounting eight mini cleats. Used with deck thickness up to 2”.

For larger boats on larger bodies of water.

Cast, White or Black powder-coated.

White part# D1CA8W Volume Pack 50 pcs

Black part# D1CA8B Volume Pack 50 pcs

Cast part# D1CA8C Volume Pack 60 pcs

12” Volume Pack 40 pcs part# D1CG12 (Requires two bolts, nuts, washers per cleat.)

7/16” x 3” SS Hex Bolt part# NB7163G

Used with deck thickness up to 1/2”.

7/16” x 4” SS Hex Bolt part# NB7164G Used with deck thickness up to 1-1/2”.

7/16” Brass Nut part# NN716S ½” SS Flat Washer part# NW12FL

8” Aluminum Cleat

Cleat Hardware

Corner Bumpers

It is recommended that the rub rail of your boat comes in contact with the bumper rather than the bumper to come in contact with the sides of your boat as this can result in serious damage to the sides of your boat.

6” Universal Corner Bumper

Marine-grade PVC with one-inch solid outside flange for fastening to dock.

Colors: White, Black, Light Gray, Dark Gray, Blue

White part# D1BUC6WE

Black part# D1BUC6BK

Blue part# D1BUC6BE

Light Gray part# D1BUC6GYL

Dark Gray part# D1BUC6GYD

Volume Pack 32 pcs

(5 fasteners recommended per bumper, see page 8.)

10” Universal Corner Bumper

Marine-grade PVC with one-inch solid outside flange for fastening to dock.

Colors: White, Black, Blue, Light Gray, Dark Gray

White part# D1BUC10WE

Black part# D1BUC10BK

Blue part# D1BUC10BE

Light Gray part# D1BUC10GYL

Dark Gray part# D1BUC10GYD

Tan part# D1BUC10TN

Volume Pack 24 pcs

(7 fasteners recommended per bumper, see page 8.)

10” Classic Corner Bumper

Marine-grade PVC with one-inch solid outside flange for fastening to dock.

Colors: White, Black, Blue, Tan, Light Gray, Dark Gray, Khaki

White part# D1BUCWE

Black part# D1BUCBK

Blue part# D1BUCBE

Tan part# D1BUCTN

Light Gray part# D1BUCGYL

Dark Gray part# D1BUCGYD Khaki part# D1BUCKI

Volume Pack 24 pcs

(7 fasteners recommended per bumper, see page 8.)

10” Small Lip Corner Bumper

Marine-grade PVC with small 3/16” flange for fastening to dock.

Colors:

White, Black, Blue, Tan, Light Gray, Dark Gray

White part# D1BUCSLWE

Black part# D1BUCSLBK

Blue part# D1BUCSLBE

Tan part# D1BUCSLTN

Light Gray part# D1BUCSLGYL

Dark Gray part# D1BUCSLGYD

Volume Pack 24 pcs

(7 fasteners recommended per bumper, see page 8.)

Bumper Colors

Lower Lip Corner Bumper

Wraps around 4.5” docks. One-inch solid outside flange for fastening to dock. Marine-grade PVC.

Colors: White, Black, Blue, Light Gray

White part# D1BLLCWE

Black part# D1BLLCBK

Blue part# D1BLLCBE Light Gray part# D1BLLCGYL

Volume Pack 24 pcs (7 fasteners recommended per bumper, see page 8.)

12” Soft Harbor Corner Bumper

Designed for larger docks and watercraft. Flat ends can be mounted together with harbor straight bumper. Marine-grade PVC.

Colors: White, Black, Light Gray

White part# D1BHCWE

Black part# D1BHCBK

Light Gray part# D1BHCGYL

Volume Pack 12 pcs

(8 fasteners recommended per bumper, see page 8.)

Truss Corner Bumper

Designed

Colors:

Volume

13”

White part# D1BUTC13WE*

Black part# D1BUTC13BK*

Blue part# D1BUTC13BE*

Tan part# D1BUTC13TN*

Green part# D1BUTC13GN

Light Gray part# D1BUTC13GYL*

Dark Gray part# D1BUTC13GYD

Chocolate part# D1BUTC13CE

* New style like 8” shown below

11”

White part# D1BUTC11WE

Black part# D1BUTC11BK *

Blue part# D1BUTC11BE

Tan part# D1BUTC11TN

Green part# D1BUTC11GN

Light Gray part# D1BUTC11GYL*

Dark Gray part# D1BUTC11GYD

Chocolate part# D1BUTC11CE*

Khaki part# D1BUTC11KI*

* New style like 8” shown below

8”

White part# D1BUTC8WE

Black part# D1BUTC8BK

Blue part# D1BUTC8BE

Tan part# D1BUTC8TN

Green part# D1BUTC8GN

Light Gray part# D1BUTC8GYL

Dark Gray part# D1BUTC8GYD

Chocolate part# D1BUTC8CE

Khaki part# D1BUTC8KI

Corner Bumpers

Indicates this product is shippable via UPS from your local dealer or visit us online at www.hewittrad.com.

24” Poly Harbor Cushion Corner

Made of tough and durable polyethylene.

White part# D1BPHCW

Black part# D1BPHCB

Volume Pack 12 pcs

(Requires 4 bolts, 4 nuts and 8 washers per bumper)

3/8” x 3” SS Hex Bolt part# NB383G used with wall thickness up to 1”

3/8” x 4” SS Hex Bolt part# NB384G used with wall thickness up to 2”

3/8” Brass Nut part# NN38S

3/8” SS Flat Washer part# NW38FL

It is recommended that the rub rail of your boat comes in contact with the bumper rather than the bumper to come in contact with the sides of your boat as this can result in serious damage to the sides of your boat.

Corner Bumper

6A Corner and 6B Side Bumper. Polythene bumper available in black only.

Pier Bumper

part# D1B6A part# D1B6B

Matching 48” bumper on page 17.

Bumper Screws - Wood

#10 Stainless steel 1-1/4” bumper screws for wood decking/docks. 50 qty bag

Volume Pack 24 pcs

part# D1BUSCSS

Bumper Screws

Use to securely fasten bumpers to your dock frame with a large .455” head.

50 qty bag (self-tapping)

Volume Pack 24 pcs

part# D1BUSC

Poly Bumper Backing Plate

3/8” x 2” Aluminum.

Volume Pack 200 pcs part # D1BPHCP

Lag Bolt Set

Pro- Guard Storm

Galvanized lag bolts for attaching harbor and frame bumpers to wood docks.

3/8” x 2” galvanized lag bolt part# NB382L

3/8” x 3” galvanized lag bolt part# NB383L

3/8” x 5” galvanized lag bolt part# NB385L 3/8” SS flat washer part# NW38FL

Post Caps and Covers

Round marine-grade vinyl caps fit over the top of dock pipes.

Colors: Blue, Red, Black, White, Green, Tan, Light Gray, Teal, Khaki

Volume Pack 200 pcs

1-1/4” Cap for 1-1/2” OD Pipe

Blue part# D1RC114BE

Red part# D1RC114RD

Black part# D1RC114BK

White part# D1RC114WE

Green part# D1RC114GN

Tan part# D1RC114TN

Light Gray part# D1RC114GYL

1-1/2” Cap for 1-3/4” OD Pipe

Blue part# D1RC112BE

Red part# D1RC112RD

Black part# D1RC112BK

White part# D1RC112WE

Green part# D1RC112GN

Light Gray part# D1RC112GYL

2” Cap for 2-1/4” OD Pipe

Blue part# D1RC2BE

Red part# D1RC2RD

Black part# D1RC2BK

White part# D1RC2WE

Green part# D1RC2GN

Tan part# D1RC2TN

Light Gray part# D1RC2GYL

2-11/16” Dock Post, 2-15/16” ID

White part# D1RC211/16

Pole Cover

The 36” pipe covers are designed to slide over 1-1/4”, 1-1/2” or 2” dock pipe to provide a uniform look to your dock. They can be trimmed to any size for custom applications.

Material: Marine-grade PVC

WITH ROUND TOP

1-1/4” Cap for 1-1/2” OD Pipe

Blue part# D1RRC1-1/4BE

Red part# D1RRC1-1/4RD

Black part# D1RRC1-1/4BK

White part# D1RRC1-1/4WE

Green part# D1RRC1-1/4GN

Light Gray part# D1RRC1-1/4GYL

Teal part# D1RRC1-1/4TL

Khaki part# D1RRC1-1/4KI

1-1/2” Cap for 1-3/4” OD Pipe

Blue part# D1RRC1-1/2BE

Red part# D1RRC1-1/2RD

Black part# D1RRC1-1/2BK

White part# D1RRC1-1/2WE

Green part# D1RRC1-1/2GN

Tan part# D1RRC1-1/2TN

Light Gray part# D1RRC1-1/2GYL

Teal part# D1RRC1-1/2TL

Khaki part# D1RRC1-1/2KI

2” Cap for 2-1/4” OD Pipe

Blue part# D1RRC2-BE

Red part# D1RRC2-RD

Black part# D1RRC2-BK

White part# D1RRC2-WE

Green part# D1RRC2-GN

Tan part# D1RRC2-TN

Light Gray part# D1RRC2-GYL

Teal part# D1RRC2-TL

Installation: Trim the pipe covers to your desired length and slide them over your dock pipe.

Slides easily over dock pipes.

Colors:

White, Black, Blue, Green, Tan, Light Gray, Khaki Volume Pack 24 pcs

Small Cover 2” ID for 1-1/4 and 1-1/2” Pipe

White part# D1PG114WE

Black part# D1PG114BK

Blue part# D1PG114BE

Green part# D1PG114GN

Tan part# D1PG114TN

Light Gray part# D1PG114GYL

Khaki part# D1PG114KI

Large Cover 2-3/4” ID for 2” Pipe

White part# D1PG2WE

Black part# D1PG2BK

Blue part# D1PG2BE

Green part# D1PG2GN

Tan part# D1PG2TN

Light Gray part# D1PG2GYL

Khaki part# D1PG24KI

Round Rubber Pipe Cap

Teal

Black Blue Green White Red Light Gray Tan Dark Gray Chocolate Khaki

Bumper Colors

WITH FLAT TOP

Dock Wheels

Indicates this product is shippable via UPS from your local dealer or visit us online at www.hewittrad.com.

These dock wheels are designed to gently roll your watercraft along the dock. They will fit over 1-1/4”, 1-1/2”, or 2” dock pipe with an optional locking collar.

Material: Marine-grade PVC

Installation: Slide one nylon bushing over post and tighten set screws. Slide the dock wheel over the post, then slide second nylon bushing over post and tighten set screws.

Color: White Volume Pack 12 pcs

For 1-1/4” and 1-1/2” Pipe part# DF300021 Wheel Only

For 2” Pipe part# DF301032 Wheel Only

Locking Collar part# D1BDW12COLLAR

Nylon bushing with nylon set screws for easy height adjustment and locking wheel from being raised.

These dock wheels are designed to gently roll your watercraft along the dock. Attaches to corners of dock.

Material: Marine-grade PVC

12” Wheel - Post Mount

10” & 14” Wheel - Corner Mount

Torpedo Bumpers

Torpedo

Post Bumper

Slides over dock pipe and wraps around support stand bracket. Protects your boat from rubbing on dock.

Marine-grade PVC vinyl with UV and anti-fungal protection.

Installation: Slide the top end cap down the length of your dock post, then open the slit on the bottom end cap and wrap the cap around the post under your dock while fitting the dock hardware in the recessed back.

Colors: White, Black, Blue, Green, Tan, Light Gray, Dark Gray, Chocolate, Cranberry, Khaki, Teal

Volume Pack 20 pcs

18” Torpedo Post Bumper

White part# D1BT18WE

Black part# D1BT18BK

Blue part# D1BT18BE

Green part# D1BT18GN

Tan part# D1BT18TN

Light Gray part# D1BT18GYL

Dark Gray part# D1BT18GYD

Chocolate part# D1BT18CE

Khaki part# D1BT18KI

Teal part# D1BT18TL

24” Torpedo Post Bumper

White* part# D1BUW

Black part# D1BT24BK

Blue* part# D1BUB

Green part# D1BT24GN

Tan part# D1BT24TN

Light Gray part# D1BT24GYL

Dark Gray part# D1BT24GYD

Khaki part# D1BT24KI

* Best Sellers

High strength and corrosion resistant. Hewitt parts and accessories are built to last.

Teal

Black Blue Green White Red Light Gray Tan Dark Gray Chocolate Khaki

Bumper Colors

Adjustable Bumpers

Indicates this product is shippable via UPS from your local dealer or visit us online at www.hewittrad.com.

It is recommended that the rub rail of your boat comes in contact with the bumper rather than the bumper to come in contact with the sides of your boat as this can result in serious damage to the sides of your boat.

These bumpers are specially designed to work with modern truss-style docking. The bumpers have an aluminum extrusion inside the bumper with a rail exposed on the back side. The rail holds the bolt heads that can slide up or down the bumper to adjust the height before the hardware is tightened. Marine-grade PVC, Aluminum core.

Installation: Simply place the bumper in the desired location and attach the back plate and nuts.

36” Bumper with Aluminum Backer

Low density polyethylene.

30” Half-Round Bumper with Aluminum Backer - VERTICAL

Colors: White, Black, Blue, Light Gray, Chocolate, Green, Tan, Khaki

White part# D1BU30VWE

Black part# D1BU30VBK

Blue part# D1BU30VBE

Light Gray part# D1BU30VGYL

Chocolate part# D1BU30VCE

Green part# D1BU30VGN

Tan part# D1BU30VTN

Khaki part# D1BU30VKI

Volume Pack 24 pcs

30” Half-Round Bumper with Aluminum Backer - HORIZONTAL

Colors: White, Black, Blue, Light Gray, Chocolate, Green, Tan, Khaki

White part# D1BU30HWE

Black part# D1BU30HBK

Blue part# D1BU30HBE

Light Gray part# D1BU30HGYL

Chocolate part# D1BU30HCE

Green part# D1BU30HGN

Tan part# D1BU30HTN

Khaki part# D1BU30HKI

Volume Pack 24 pcs

Installation: Simply place the bumper in the desired location and attach the back plate and nuts.

Colors: White, Black Volume Pack 28 pcs

2” Deep

White part# D1BU36WA2W

Black part# D1BU36WA2B

3-1/2” Deep

White part# D1BU36WAXW

Black part# D1BU36WAXB

Teal

Black Blue Green White

Cranberry Red Light Gray Tan Dark Gray Chocolate Khaki

End View

36” Adjustable Side Bumpers

Durable plastic bumper mounted on a 2” x 2” aluminum tube (largest in the industry) with your choice of aluminum mounting hardware. This setup is completely adjustable.

Volume Pack 24 pcs

36”

Locking Arm Bumper

This bumper slides over the BoatPort locking arm upright to act as a bumper/centering guide.

Volume Pack 24 pcs

part# D1BUVAW

D1BUVAB

Rectangular and Edging Bumpers

Dockside Bumper

Larger-sized bumper with deep projection with nautical design.

Marine-grade PVC.

Colors:

Lower Lip Corner Bumper

White, Black, Blue, Green, Tan, Light Gray, Khaki

Volume Pack 24 pcs

White part# D1BDBWE

Black part# D1BDBBK

Blue part# D1BDBBE

Green part# D1BDBGN

Tan part# D1BDBTN

Light Gray part# D1BDBGYL

Khaki part# D1BDBKI

(4 fasteners recommended per bumper, see page 8.)

Bumper

It is recommended that the rub rail of your boat comes in contact with the bumper rather than the bumper to come in contact with the sides of your boat as this can result in serious damage to the sides of your boat.

Straight Bumper

Marine-grade PVC. Mount on the sides of any wood or metal dock.

Colors:

White, Black, Blue, Tan, Light Gray, Dark Gray, Khaki Volume Pack 24 pcs

White part# D1BUSWE

Black part# D1BUSBK

Soft Harbor Bumper

Handles larger watercraft. 5” of projection from the dock. Marine-grade PVC.

Colors: White, Black, Light Gray Volume Pack 24 pcs

White part# D1BHSWE

Black part# D1BHSBK

Light Gray part# D1BHSGYL

Bumper

Blue part# D1BUSBE

Tan part# D1BUSTN

Light Gray part# D1BUSGYL

Dark Gray part# D1BUSGYD

Khaki part# D1BUSKI

(6 fasteners recommended per bumper, see page 8.)

(8 fasteners recommended per bumper, see page 8.)

Matching corner on page 7.

36”

Teal

Black Blue Green White Cranberry Red Light Gray Tan Dark Gray Chocolate Khaki

36” and 48” Round Edge Guard without Lip

Handles larger watercraft. Marine-grade PVC with UV and anti-fungal protection.

Colors: White, Black, Blue, Green, Tan, Light Gray, Khaki. Volume Pack 24 pcs

and 48” Round Edge Guard with Lip

36” Without Lip

White part# D1BUEWE

Black part# D1BUEBK

Blue part# D1BUEBE

Green part# D1BUEGN

Tan part# D1BUETN

Light Gray part# D1BUEGYL

Khaki part# D1BUEKI

36” With Lip

White part# D1BUELWE

Black part# D1BUELBK

Blue part# D1BUELBE

Green part# D1BUELGN

Tan part# D1BUELTN

Light Gray part# D1BUELGYL

Khaki part# D1BUELKI

48” Without Lip

White part# D1BUE48WE

Black part# D1BUE48BK

(Requires 4 bolts, 4 nuts and 8 washers per bumper)

3/8” x 3” SS Hex Bolt part# NB383G used with wall thickness up to 1”

3/8” x 4” SS Hex Bolt part# NB384G used with wall thickness up to 2”

3/8” Brass Nut part# NN38S

3/8” SS Flat Washer part# NW38FL

(Requires 3 bolts, 3 nuts and 6 washers per bumper)

3/8” x 3” SS Hex Bolt part# NB383G used with wall thickness up to 1"

3/8” x 4” SS Hex Bolt part# NB384G used with wall thickness up to 2"

3/8” Brass Nut part# NN38S

3/8” SS Flat Washer part# NW38FL

Edging Bumpers

Bumper Colors

Indicates this product is shippable via UPS from your local dealer or visit us online at www.hewittrad.com.

24”and 36” Plastic Bumpers

High-strength polyethylene plastic formulated with UV protection for the marine environment. Mount to square poles with recessed mounting holes.

Colors: White, Black, Green, Tan, Light Gray. Volume Pack 24 pcs

24” Bumpers

Flat back-White part# D1BUVP24FW

2” slot-White part# D1BUVP24W

2” slot-Black part# D1BUVP24B

3-1/2” slot-White part# D1BUVP243W

3-1/2” slot-Black part# D1BUVP243B

3-1/2” slot-Light Gray part# D1BUVP243GYL

36” Bumpers

2” slot-White part# D1BUVP2W

2” slot-Black part# D1BUVP2B

2” slot-Green part# D1BUVP2G

2” slot-Tan part# D1BUVP2TN

2” slot-Light Gray part# D1BUVP2GYL

2-1/2” slot-White part# D1BUVP212W

2-1/2” slot-Black part# D1BUVP212B

2-1/2” slot-Light Gray part# D1BUVP212GYL

(Mounted to 2x2 tube. Requires 2 bolts, 2 nuts and 4 washers per bumper)

3/8” x 3-1/2” SS Hex Bolt part# NB38312G

(Used with tube thickness up to 2”)

3/8” Brass Nut part# NN38S

3/8” SS Flat Washer part# NW38FL

36” Bumpers

3-1/2” slot-White part# D1BUVP3W

3-1/2” slot-Black part# D1BUVP3B

(Mounted to 3x3 tube. Requires 2 bolts, 2 nuts and 4 washers per bumper)

3/8” x 4-1/2” SS Hex Bolt part# NB38412G

(Used with tube thickness up to 3”)

3/8” Brass Nut part# NN38S

3/8” SS Flat Washer part# NW38FL

X36” Bumpers

X36” Plastic with 3-1/2” Slot-White part# D1BUVP312W

X36” Plastic with 3-1/2” Slot-Black part# D1BUVP312B

(Mounted to 3x3 tube. Requires 2 bolts, 2 nuts and 4 washers per bumper)

3/8” x 6” Bolt part# NB386G

(Used with tube thickness up to 3”)

3/8” Brass Nut part# NN38S

3/8” SS Flat Washer part# NW38FL

It is recommended that the rub rail of your boat comes in contact with the bumper rather than the bumper to come in contact with the sides of your boat as this can result in serious damage to the sides of your boat.

43” Frame Bumper

Durable polyethylene with UV inhibitors. Molded-in recessed mounting holes make the frame bumper easy to mount.

White part# D1BUFRW

Black part# D1BUFRB Volume Pack 24 pcs

(Requires 4 bolts, 4 nuts and 8 washers per bumper)

3/8” x 5” SS Hex Bolt part# NB385G used with wall thickness up to 1”

3/8” x 6” SS Hex Bolt part# NB386G used with wall thickness up to 2”

3/8” Brass Nut part# NN38S

3/8” SS Flat Washer part# NW38FL

Frame Bumper Backing Plate

3/8” x 2” Aluminum. part # D1BUFRP Volume Pack 200 pcs

Pier Bumper

C

Mount on the sides of any wood or metal dock. Marine-grade PVC.

Colors: White, Black, Blue, Tan, Light Gray, Khaki Volume Pack 24 pcs (4 fasteners recommended per bumper, see page 8.)

White part# D1BPBWE

Black part# D1BPBBK

Blue part# D1BPBBE

Tan part# D1BPBTN

Light Gray part# D1BPBGYL

Khaki part# D1BPBKI

Teal

Black Blue Green White

Cranberry Red Light Gray Tan Dark Gray Chocolate Khaki

Cushion Bumper

Upper and lower lip wrap around the dock. Waffle effect backside for additional cushioning. Marine-grade PVC.

Colors: White, Black, Blue, Light Gray

Volume Pack 24 pcs

White part# D1BCBWE

Black part# D1BCBBK

Blue part# D1BCBBE

Light Gray part# D1BCBGYL

(8 fasteners recommended per bumper, see page 8.)

Piling Bumper

Designed to mount vertically on pilings to provide protection to watercraft. The concave shape provides a perfect mating surface to pilings. Marine-grade PVC.

Colors: White, Black, Blue, Light Gray, Khaki Volume Pack 40 pcs

White part# D1BPWE

Black part# D1BPBK

Blue part# D1BPBE

Light Gray part# D1BPGYL Khaki part# D1BPKI

(12 fasteners recommended per bumper, see page 8.)

Poly Harbor Cushion

Durable polyethylene with UV inhibitors. Molded-in recessed mounting holes make the frame bumper easy to mount.

48”

White part# D1BPHSW

Black part# D1BPHSB

Volume Pack 24 pcs

(Requires 4 bolts, 4 nuts and 8 washers per bumper)

3/8” x 3” SS Hex Bolt part# NB383G used with wall thickness up to 1”

3/8” x 4” SS Hex Bolt part# NB384G used with wall thickness up to 2”

3/8” Brass Nut part# NN38S

3/8” SS Flat Washer part# NW38FL

Cushion Bumper

Matching corner on page 8.

5002 Rub Rail – 10’ length

White part# D1BUB5002W

Black part# D1BUB5002B

Volume Pack 96 pcs

(40 fasteners recommended per bumper, see page 8.)

5001 Rub Rail – 10’ length

White part# D1BUB5001W

Black part# D1BUB5001B

Volume Pack 100 pcs

(40 fasteners recommended per bumper, see page 8.)

5007 Rub Rail – 10’ length

White part# D1BUB5007W

Black part# D1BUB5007B

Volume Pack 96 pcs

(40 fasteners recommended per bumper, see page 8.)

Brackets and Lights

Indicates this product is shippable via UPS from your local dealer or visit us online at www.hewittrad.com.

Aluminum Mud Pads

1-1/4” Standard 1-3/4” ID part# DAMUD

1-1/2” Large 2-1/2” ID part# DAMUDLG

Support Stand Brackets

Galvanized bracket ID Finish Part#

Wheel Pad

Slides on wheel upright axle. part# DCMUD

Vers-A-Dock Corner Pipe Holder

Used to add a corner post to the Vers-A-Dock. part# DV101

2” medium 2” galvanized DSBRACM

2-1/2” large 2-1/2” galvanized DSBRACLG

3-1/4” extra large 3-1/4” galvanized DSBRACXL

Aluminum bracket

1-1/4” standard 1-3/4” aluminum DABRAC

2-1/2” large short 2-1/2” aluminum DABRACLG

2-1/2” large long 2-1/2” aluminum DABRACLGL

Hinged Sea Wall Brackets For mounting Roll-A-Dock to sea wall face. part# D1SWBHI

Connection Clamp

Used for connecting Vers-A-Dock and Classic dock sections together.

part# DV102

Hooked Sea Wall Brackets

Hooks Roll-A-Dock to sea walls up to 4-1/2” thick. Custom sizes available for Vers-A-Dock, Classic and other types of docks. part# D1SWBH

Sectional

Brackets

Unidock Clamp

Used for connecting Ultra Dock sections together. part# DUCLAMP U

Standard - for 1-1/4” Pipe part# DUBRAC

Medium - for 1-1/2” Pipe part# DUBRACM

Large - for 2” Pipe part# DUBRACL

strength low

aluminum solar powered deck light made for superior protection. Deck lights have a built in reflector (104mm x 106mm)

One Light part# D1LDECK

Volume Pack 48 pcs

Great way to light up your dock or pier. Lasts 18+ hours on a full charge and much brighter. Automatically turns on the super bright LED.

Two Lights part# D1LPOST

Volume Pack 24 pcs

Augers, Pipes, Tires and Bracing

Indicates this product is shippable via UPS from your local dealer or visit us online at www.hewittrad.com.

Augers

Attach auger at end of post and turn post to auger into the bottom of lake bed.

DB800-standard 1-5/8” inside diameter (slidesoverpipe) part# DAMUDP

DB903-medium 1-7/8” inside diameter (slidesoverpipe) part# DAMUDPM

DB400-large 2” outside diameter (slidesinsidepipe) part# DAMUDPLG

Requires drilling and 3/8” x 3” bolt and nut.

Post Ratchet

W R V S C F

Provides leverage to easily install and remove pipes with augers. This 19” handle and reversible ratchet fits 1-1/4”, 1-1/2’, and 2” pipes up to 2-1/4” O.D.

part# DAPR

Support Stand Pipes

R V S C F

Roll-In Wheel

(Do not fit Hewitt axles.)

For use with roll-in dock and lift applications.

Wheels weigh 12 pounds each with an estimated weight limit of 750 pounds each or 1500 pounds per pair. High strength plastic wheel with UV protection.

24” Diameter, 8” Wide

Volume Pack 80 pcs

1-1/4” axle, 1-5/8” od part# D1TIRE114

1-1/2” axle, 1-7/8” od part# D1TIRE112 2” axle, 2-3/8” od part# D1TIRE2

18” Diameter, 8” Wide

Volume Pack 40 pcs

1-1/4” axle, 1-5/8” od part# D1TIRE18-114

1-1/2” axle, 1-7/8” od part# D1TIRE18-112 2” axle, 2-3/8” od part# D1TIRE18-2

Fishing Rod/Cup Holder

DGP51/4 DGP81/4 DGP101/4 DAP121/4 DGP211/4 DGP241/4 1-1/2” 1-3/4” DGP5M DGP8M DGP10M DGP12M DGP21M DGP24M 2” 2-1/4” DGP5L DGP8L DGP10L DGP12L DGP21L DGP24L 2-1/2” 2-3/4” DGP5XL DGP8XL DGP10XL DGP12XL DGP21XL DGP24XL

Galvanized pipe with auger and hole for post ratchet. 2” 2-1/4” N/A DGP8LWA DGP10LWA DGP12LWA N/A N/A

Rigid aluminum bracket mounts to 1-1/2” outside diameter post. Two flush-mount cup holders and two mounted rod holders along with a spot for a needle-nose pliers. part# D1ROD W

Hewitt Standard Plastic Tire

These are Hewitt’s standard tires and fit all Hewitt axles and wheel kits.

27” Tire

Standard 18lbs (950 lbs capacity) part# DWHEEL

27” Tire

Heavy-duty 24lbs (1300 lbs capacity) part# DWHEELHD

16” Tire 12lbs (950 lbs capacity) part# DWHEELS

25” Otter Tire

1-7/8” Axle Opening. Does not fit Hewitt axles.

Volume Pack 100 pcs

14lbs (1150 lbs capacity) part# DF300449

Non-Vented

14lbs (1150 lbs capacity) part# DF300450

Polyethylene tire features seamless construction and venting.

Post Winch Kit

Provides leverage for adjusting your dock. Winch slides over dock post. Winch kit pipe has a 2” inside diameter. part# DAPW

Aluminum Cross Brace Kit

For more stability in muddy or deep water. Heavy-duty extruded ends slide over pipe and secure with large set screws. (complete X)

2’ Cross Brace Kit

Aluminum cross bracing that works great in shallow waters on the ends and sides of the dock. One end clamps to dock and other end slides over pipe.

2’ Pipe to Frame part# DS13 V C

Quick Change Cross Bracing

Add galvanized steel dock leg bracing from on top of your dock, without going under water, and keeping superior strength with a simple design.

Fits pipe up to 1-1/2” OD.

5’ Pipe to Frame part# DV1035

6’ Pipe to Pipe part# DV1036

Fits pipe up to 2-1/4” OD.

7’ Pipe to Frame part# DV1037

Dock Wheels and Accessories

Indicates this product is shippable via UPS from your local dealer or visit us online at www.hewittrad.com.

Dock Hitch

Heavy duty aluminum hitch for easier dock removal or installation. Attach to an SUV, lawn mower or ATV.

4’ wide part# D1HITCH

6’ wide part# D6HITCH

Swivel Wheel

The aluminum fork and tongue slides into the heavy-duty aluminum cross bar that attaches to the shore end of dock. Used to maneuver dock around objects.

4’ wide swivel wheel part# D1HSW

Adjustable Shore End Helper Wheel

Attaches to shore end of dock to help with dock installation or removal without lifting or carrying over rocks or other rough terrain.

Dock Crank Handle

Removable handle to raise and lower the Roll-A-Dock.

Deep Water Extensions

Dock Hole Plug

Used to plug deck hole when crank handle is removed.

Converts the standard 4’ wide aluminum wheel assemblies to accommodate 8’ water depths by making it telescope (cutting required). Replaces the standard wheel assembly to adjust up to 8’. 48” Aluminum part# DDEEPA3-3

Helper Wheel for “L”

Attaches to dock ends to assist in removing or installing “L” or “T” dock sections.

4’ wide with 5’ upright part# D1HLA

4’ wide with 8’ upright part# D1HLA8

4’ wide with screw upright part# D1HLAS

6’ wide with 5’ upright part# D6HLA

6’ wide with 8’ upright part# D6HLA8

6’ wide with screw upright part# D6HLAS

*Recommendeduseof3’x3’capfor4’,6’&8’models.Seepage62.

Deep Water Kit

Replaces the standard wheel assembly to adjust up to 8’.

4’ Aluminum part# DDEEPA

4’ Galvanized part# DDEEPG

6’ Galvanized part# D6DEEPG

8’ Helper Wheel for “L”

Attaches to sides of 8’ sections or end of two 4’ sections to assist in removing or installing “L” or “T” dock sections.

8’ wide with 5’ upright part# D8HLA

8’ wide with 8’ upright part# D8HLA8

8’ wide with screw upright part# D8HLAS

8’ wide with two 5’ uprights part# D8HLAD

8’ wide with twp 8’ uprights part# D8HLAD8

8’ wide with two screw uprights part# D8HLADS

Screw Upright with Patent-Pending Brake and Stop Bolt

Adjustable Screw Drive Bit

Fits all screw legs except the classic dock screw legs. part# LLSAB

Sectional Dock Systems, Hinges and Plates

Indicates this product is shippable via UPS from your local dealer or visit us online at www.hewittrad.com.

Sectional Dock

Add your own decking to our permanent aluminum framed dock system.

4’ x 8’ Frame with 5’ support pipes part# DSFRAME5 4’ x 10’ Frame with 5’ support pipes part# DSFRAME105

4’ x 8’ Frame with 8’ support pipes part# DSFRAME8 4’ x 8’ Frame with 8’ support pipes part# DSFRAME108

6’ x 8’ Frame with 5’ support pipes part# DS6FRAME5 6’ x 10’ Frame with 5’ support pipes part# DS6FRAME105

6’ x 8’ Frame with 8’ support pipes part# DS6FRAME8 6’ x 10’ Frame with 8’ support pipes part# DS6FRAME108

Priceincludes:Twoextrudedsides,One4’or6’crossarmbracket,Two1-1/4”aluminumsupportpipesandTwoaluminummudplates.

4’ and 6’ Turn Arm Bracket

Used to construct right angles, deck peninsulas, or “L” or “T” sections.

4’ Turn bracket only part# DS103 6’ Turn bracket only part# DS113

One 5’ Aluminum pipe only part# DAP5 One 8’ Aluminum pipe only part# DAP8

4’ Turn bracket kit w/5’ pipe part# DS1035 4’ Turn bracket kit w/8’ pipe part# DS1038

6’ Turn bracket kit w/5’ pipe part# DS1135 6’ Turn bracket kit w/8’ pipe part# DS1138

Priceincludes:One4’or6’turnbracket,One1-1/4”aluminumpipeandOnealuminummudplate. S S

Make your own dock! 4’ or 6’ Aluminum Cross Arm

Support pieces for dock ends.

4’ Cross arm only part# DS102 6’ Cross arm only part# DS107

One 5’ Aluminum pipe only part# DAP5 One 8’ Aluminum pipe only part# DAP8

One Aluminum mud plate only part# DAMUD 4’ Cross arm kit with 5’ support pipes part# DS1025

4’ Cross arm kit with 8’ support pipes part# DS1028 6’ Cross arm kit with 5’ support pipes part# DS1075

6’ Cross arm kit with 8’ support pipes part# DS1078

Priceincludes:One4’or6’crossarmbracket,Two1-1/4”aluminumsupportpipesandTwoaluminummudplates. S

4’ and 6’ End Caps

Closes off dock ends for a more finished look.

4’ Aluminum part# DS122

6’ Aluminum part# DS6122 S

4’ Starter piece part# DS120 S

Sectional Starter Piece Keeps front of dock from sinking into sand.

Piano Hinges

Our most popular hinge provides good appearance with maximum strength. Piano hinge has a 3-hole bolt pattern. Has replaceable internal PVC to make a quiet hinge and reduce wear on aluminum parts.

2’ Bolt-on Piano Hinge – Short/Short part# D2HINHSS

2’ Bolt-on Piano Hinge – Short/Medium part# D2HINHSM

2’ Bolt-on Piano Hinge – Short/Tall part# D2HINHST

2’ Bolt-on Piano Hinge – Tall/Medium part# D2HINHTM

2’ Bolt-on Piano Hinge – Tall/Tall part# D2HINHTT

3’ Bolt-on Piano Hinge – Short/Short part# D3HINHSS

3’ Bolt-on Piano Hinge – Short/Medium part# D3HINHSM

3’ Bolt-on Piano Hinge – Short/Tall part# D3HINHST

3’ Bolt-on Piano Hinge – Tall/Medium part# D3HINHTM

3’ Bolt-on Piano Hinge – Tall/Tall part# D3HINHTT

4’ Bolt-on Piano Hinge – Short/Short part# D1HINHSS

4’ Bolt-on Piano Hinge – Short/Medium part# D1HINHSM

4’ Bolt-on Piano Hinge – Short/Tall part# D1HINHST

4’ Bolt-on Piano Hinge – Tall/Medium part# D1HINHTM

4’ Bolt-on Piano Hinge – Tall/Tall part# D1HINHTT

6’ Bolt-on Piano Hinge – Short/Short part# D6HINHSS

6’ Bolt-on Piano Hinge – Short/Medium part# D6HINHSM

6’ Bolt-on Piano Hinge – Short/Tall part# D6HINHST

6’ Bolt-on Piano Hinge – Tall/Medium part# D6HINHTM

6’ Bolt-on Piano Hinge – Tall/Tall part# D6HINHTT

8’ Bolt-on Piano Hinge – Short/Short part# D8HINHSS

8’ Bolt-on Piano Hinge – Short/Medium part# D8HINHSM

8’ Bolt-on Piano Hinge – Tall/Medium part# D8HINHTM

8’ Heavy Duty Alum Piano Hinge part# D8HINAP

Corner Support Hinge

Used with piano hinge to secure fingers or walkways on floating docks. This hinge needs a special plate welded to the dock for mounting.

Left part# D1HINACL Right part# D1HINACR

Small Heavy-Duty Hinges

Used on longer multi-section Roll-A-Docks over 48’ long equipped with two or more wheel bases. Small heavy-duty hinge has a 2-hole bolt pattern.

4’ aluminum small heavy duty 3-1/4” part# D1HINAHS

6’ aluminum small heavy duty 3-1/4” part# D6HINAHS

Large Heavy-Duty Hinges

Used in rough water where up and down flex is needed. Heavy-duty hinge has a 3-hole bolt pattern.

4’ aluminum heavy duty 3-1/4” part# D1HINAH

6’ aluminum heavy duty 3-1/4” part# D6HINAH

4’ galvanized heavy duty 3” part# D1HINGH

Heavy-Duty Aluminum Transition Plate

Create a smooth transition between dock sections or seawall. (Hardware not included)

4’ part# D1TP4

6’ part# D1TP6

8’ part# D1TP8

12’ part# D1TP12

4’ part# D1TPHD4

5’ part# D1TPHD5

6’ part# D1TPHD6

8’ part# D1TPHD8

Weld hinge to your ramp/gangway, dock or seawall. part # ADD-00114

1/2” x 5” SS Hex Bolt part # NB125G

1/2” Coated Hex Lock Nut part #NN12L (Threeareusedoneachplate.)

Aluminum Transition Plate

Dock Ramps and Corner Triangles

Indicates this product is shippable via UPS from your local dealer or visit us online at www.hewittrad.com.

Roll-A-Dock Ramp

Used for the transition between the dock and your shoreline. This ramp features a tip-over design. No need to unbolt the ramp at the end of the season or when mowing around docks. Simply flip it over! Four decking options available.

4’ x 4’ 6’ x 4’

4’ x 8’ 6’ x 8’

4’ x 12’

Sectional Dock Ramp

Used for the transition between the dock and your shoreline. Three decking options available; includes hinge kit; drilling required.

4’ x 4’ 6’ x 4’

4’ x 8’ 6’ x 8’

Vers-A-Dock Ramp

Used for the transition between the dock and your shoreline. Three decking options available; includes hinge kit.

4’ x 4’

4’ x 8’

Classic Dock Ramp

Used for the transition between the dock and your shoreline. Three decking options available; includes hinge kit.

4’ x 4’

x 8’

U Ultra Dock Ramp

Used for the transition between the dock and your shoreline. Two decking options available; includes hinge kit.

4’ x 4’ 4’ x 8’ 4’ x 12’

Wave Dock Ramp

Paver-style “pebble beach” textured deck finish. Rotationally molded with high-impact polyethylene and maximum UV protection.

7’ Wave Dock Ramp DF300055 12’ 8” Wave Dock Ramp DF301518

Custom Aluminum Ramp with Wave Armor Deck

5x10’ D1FMWD5X10 5x20’ D1FMWD5X20

• Must purchase custom Wave Dock hinge (D1HINCH).

• May need additional dock float on end of dock.

Custom Aluminum Ramp with Beige Aluminum Decking

4x10’ 4x16’ 4x20’ 4x24’ 5x10’ 5x16’ 5x20’ 5x24’

• Must purchase custom Wave Dock hinge (D1HINCH).

• May need additional dock float on end of dock.

• Also available with ThruFlow™ decking.

4’ Triangle Corners

Triangle corners for truss frame docks have a 2” frame with choice of four decking options. Aluminum and cedar shown at right. (Bolts on, drilling required. Purchase three Connection Clamps for clamp on - DV102.)

4’ Ultra Dock Triangle Corner

Triangle corner with 2” aluminum frame. Choose from white or woodgrain aluminum and white, beige, or gray ThruFlow™ (Clamps on.)

4’ Classic Dock Triangle Corner

Classic Dock triangle corner has a 5” classic extruded frame with choice of three decking options. ThruFlow™ decking, shown right, is one option available. (Clamps on.)

4’ Vers-A-Dock Triangle Corner

Vers-A-Dock triangle corners have a 2” frame with choice of 3 decking options. Shown to the right is a Vers-A-Dock with aluminum decking. (Bolts on, drilling required. Purchase three Connection Clamps for clamp on - DV102.)

Decking

Indicates this product is shippable via UPS from your local dealer or visit us online at www.hewittrad.com.

Decking Options

Hewitt offers several different decking options. Each style is unique. Let us help you decide what best fits your needs. Hewitt can customize your dock with any of these listed materials. If you have any questions, please contact your local dealer.

Cedar. A traditional favorite. Solid, durable wood that is naturally weather resistant. Cedar boards come in 5/4” radius smooth planks.

Skidguard. A waffle-weave textured panel with a heavy-duty phenolic overlay. Skidguard provides a continuous, no-gap surface that is highly resistant to peeling or chipping.*

* not available on 6’ wide docks.

QT Powder Coated All-Aluminum. Extruded aluminum decking that offers superior strength, low weight and corrosion resistance. Incorporates sound deadening material and a baked-on beige, white, or woodgrain finish for a durable nonskid surface. Custom colors available.

*Woodgrain available for Ultra Dock and Residential Gangways only.

ThruFlow™. Reinforced polypropylene finished decking system, designed for easy assembly that requires no maintenance. Its strong, durable, lightweight design makes for a perfect finish on our docks.

ThruFlow™ allows water and debris to fall through your dock surface.

ThruFlow™ Decking

PIER BUMPER

ThruFlow™ Decking

White Volume Pack

Mounting Holes

1x3 part# D1DTF3X1 280 pcs 6

1x4 part# D1DTF4X1 280 pcs 8

Pier Bumper

1x5 part# D1DTF5X1 280 pcs 10

Pier Bumper

4x4 part# D1DTF4X4 70 pcs 32

Beige Volume Pack Mounting Holes

1x3 part# D1DTFB3X1 280 pcs 6

1x4 part# D1DTFB4X1 280 pcs 8

1x5 part# D1DTFB5X1 280 pcs 10

4x4 part# D1DTFB4X4 70 pcs 32

Gray Volume Pack Mounting Holes

1x3 part# D1DTFG3X1 280 pcs 6

1x4 part# D1DTFG4X1 280 pcs 8

1x5 part# D1DTFG5X1 280 pcs 10

4x4 part# D1DTFG4X4 70 pcs 32

Pro Guard Bumper

The complete flooring system for docks, decks, marinas, gangways and walkways. Easy to assemble, maintenance-free and long-lasting.

ThruFlowTM is designed and engineered to be the finished decking surface for docks, decks, walkways and virtually any indoor or outdoor structure. ThruFlowTM panels are the ideal choice for: Docks and piers, decks and patios, marinas, walkways, gangways and ramps, any area prone to storm effects, or environmental sensitivity.

Safety First

Proprietary molded-in 360 degree non-slip surface makes ThruFlowTM safe for children and always comfortable on the feet. ThruFlowTM also has complete fresh and saltwater tolerance.

Environmentally Friendly

A grated design allows for maximum light penetration; protecting sensitive sea grasses and marine life. Total open area amounts to 43%.

Maintenance-free

As a non-microbial product, ThruFlowTM does not allow for any leaching, rot, mildew or insect growth. There is absolutely no treatment required.

Durable

Not only does ThruFlowTM have unparalleled strength, but its open design minimizes the lifting effects that waves and storm surge have on your dock. Survive the storm with ThruFlowTM.

ThruFlow™ Self-Tapping Screws

High-quality screws fasten with a large .455” head. Ideal for aluminum frames.

Stainless Steel Screws for Aluminum Frames

One each part# NS10134FH Volume Pack 400 pcs

Coated Screws for Steel Frames

One each part# NS10134FHPSD Volume Pack 400 pcs

Bolt Screw

Stainless Steel Screws for Wood Frames

One each part# NS102PH Volume Pack 400 pcs

Wave Armor Dock Accessories

Wave Dock Bumpers

Vertical 15.5”H x 9.5”D Extends 4” above dock surface. part# DF301103

Horizontal 24”L x 12”H x 8.5”D Sits flush with dock surface. part# DF300069

Large Vertical Dock Bumpers

10”W x 15.5”D x 44”H Extends 27” above dock surface. part# DF300979

Slim Dock Bumpers

Vertical 32”H x 10”W x 5.5”D Extends 3” above dock surface. part# DF301510

Horizontal 32”H x 10”W x 5.5”D Extends 20” above dock surface. part# DF301350

36” Vinyl Bumper

Adjustable in height. Includes universal H-beam. part# D1BUVW

It is recommended that the rub rail of your boat comes in contact with the bumper rather than the bumper to come in contact with the sides of your boat as this can result in serious damage to the sides of your boat.

Dock Ramp with Tapered End and Hinge Kit

7’ Long part# DF300055

12’8”’ Long part# DF301518

Custom sizes available.

Universal H-Beam T-Plate Connector

Connector secures personalized accessories.

7” (sold as single) part# DF302593

12” (2 pcs) part# DF301504

5” Filler (Decorative Side Panel)

Creates a finished look.

(8 pcs) part# DF301530

10” Pylon Hoop Attachment

(Qty 1)

part# DF300106

Mooring Chain

Adaptor

Insert Only. For 3/8” and 1/2” chain.

Mounts to post attachment kits.

part# DF21926

Corners

Adds to your surface area.

30” Corner Deck Section part# DF300051

40” Corner Deck Section part# DF302047

60” Corner Deck Section part# DF301577

Mooring Cap

Mounts to post attachment kits.

part# DF300493 W

Winch Mooring Adaptor

Mounts to post attachment kit. Winch and handle sold separately.

part# DF21925

Wave Armor Dock Accessories

W Ramp Abutment

7’ Long part# DF301509

12’8” Long part# DF301661

Universal Dock & Patio Bench

4’ Bench:

52”W x 37”H x 27”D. 66 lbs. part# DF300014

5’ Bench:

64”W x 37”H x 27”D. 81 lbs. part# DF301092

6’ Bench:

76”W x 37”H x 27”D. 96 lbs. part# DF300016

Floating Dock Ladder

Folds up when not in use. part# DF300081

Wave Dock Post Cover

W

Slides over post. Mounts to Attachment Kit sold separately. (2 pcs) part# DF301532

With Solar Light Pocket part# DF302132 - (2 pcs) part# DF302133 - (8 pcs)

W Heritage Dock Post Cover

Post covers are eloquently designed with molded-in through holes that accomodate rope up to 1-1/2” D. Covers feature a recessed pocket on top to secure Hexagon Solar Light.

Slides over post. part# DF301262

Slides into H-beam. part# DF301278

Wave Dock Post Attachment Kit (with 4” flat insert)

(With flat reducer bushing) (Pair - 2 pcs) part# DF301610

Wave Armor Hand Railing

Single Handrail

5’ part# D1RAILCW5

10’ part# D1RAILCW10

Must purchase two universal H-beams per each handrail. part# DF302593

W Decorative Snap-in Plugs

(Qty 20)

For a clean, finished look.

part# DF301574

Wave Dock Post

Attachment Kit (Raised Insert)

part# DF302065

part# DF302214

part# DF301608

part# DF301526

part# DF301527

Dock Locker Box

High-impact molded polyethylene and UV protection. Pebble Beach Textured Finish. (Fits 5’ Bench only)

Storage Box part# DF301093

Dock Bench

Attachment System

Places the bench over the water. part# DF300963

60” Half Round Dock (2-Piece)

part# DF301910

40” Half Round Dock part# DF302055

60” Quarter Round Dock (2-Piece) part# DF301841

Dock Wedge

Creates a 30-degree angle.

40” part# DF301091

60” part# DF301090

W Kayak Rack

Stows two kayaks or canoes. part# DF300107

Wave Armor Dock Accessories

Indicates this product is shippable via UPS from your local dealer or visit us online at www.hewittrad.com.

Powder-coated aluminum, adjustable swivel rocker mechanism. Chair is wrapped with two layers of fabric and is durable and comfortable. Includes T-plate and powder coated bracket for mounting chair to Wave Dock.

part# DPCHAIRW

30” Patio Table for Wave Dock

Low-maintenance powder-coated aluminum mesh table. Includes hole for optional umbrella and T-plate and powder coated bracket for mounting table to Wave Dock.

part# DPTABLEW

Mount patio chairs and table with ability to reposition chairs anytime. Aluminum bracket is powder-coated to match the table and chairs.

part# DPBRKTW

Must purchase T-plate DF302593

Kayak Launch Loops

Get in and out of kayaks and canoes with ease. Heavy-duty aluminum frame.Six adjustable settings.

Launch with Wave Dock Bracket part# D1KLW

Optional Guide Bunk part# NABPBP

Kayak Assist

Provides stability when launching or exiting kayaks and canoes. Mounts to Lower Step Down. Includes one rail and float.

Kayak Assist only part# DF301246

Step Down only part# DF301096

Entire Kit part# DF301753

Smart Steps Kit/ Universal

Includes two steps, t-plate, and mount. part# DF301809

Patio Chair for Wave Dock

Wave Dock Bracket Cleat

Wave Armor Dock Accessories

Indicates this product is shippable via UPS from your local dealer or visit us online at www.hewittrad.com.

Otter Island Raft Anchor

Made of 100% high-density polyethylene. Just fill it with sand and this 140 lb anchor will keep your raft where you want it.

part# DF300003

Volume Pack 6 pcs

Otter Island Raft Cover

Made to protect your raft from UV rays and storage during the off season.

part# DF300050

Double Clevis Kit

This complete hardware kit is designed for quick, easy attachment of an anchor to your Hewitt swim raft or Otter Island raft, using rope or chain. The kit includes two 32” lengths of galvanized chain with a clevis at each end for attachment to the raft’s eyelets. Two sections of stretch rope are provided as a flexible link that hooks between the eyelet at the center of the clevis chain and your anchor rope or chain.

part# DF302209

Volume Pack 12 pcs

Clevis Only part# DF301547

Otter Island Seat Cushion

This padded seat fits over the backrest and provides a comfortable seating surface. Made of durable quick-dry fabric and foam.

part# DF301545

Bird Deterrent

Attaches to raft and will keep birds away and your raft clean. Removable when raft is in use.

part# DBIRDR

Storage Boxes and Coolers

Thick and rugged roto-molded polyethylene. Grizzly Bear Certified by National Park Service. Other features include pressure-injected polyurethane insulation, saltwater-tested hinge pins and hardware and freezer-quality gasket. Aluminum core foam encased handles and quick-release compression lid latches make handling easy. Oversized non-slip, non-marking feet, quick-turn drain plug with gasket, hold-fast tie down slots and secure padlock thru-holes (lockable).

22-quart cooler part# DF301548-WHITE 42-quart cooler part# DF301034-WHITE

Rotationally molded with high-impact polyethylene and maximum UV protection. Pebble Beach Textured Finish. (Fits 5’ Bench only)

part# DF301093

Molded handles and double-walled lid. Water and dust resistant. Lockable.

Attaches to Universal Bench, see page 3.

Wave Armor Coolers

Polyethylene Storage Box

42 qt. dimensions shown.

Universal Storage Box

Ladders and Steps

Indicates this product is shippable via UPS from your local dealer or visit us online at www.hewittrad.com.

3,

4 or 5-Step Metal Ladders

Galvanized or Powder-coated blue. Optional speed release. 5” step.

3-step Galvanized part# DH28273

3-step Powder-coated part# DH27273

4-step Galvanized part# DH28274

4-step Powder-coated part# DH27274

5-step Galvanized part# DH28275

5-step Powder-coated part# DH27275

Straight Ladder

C U

Brackets mount on side or end of Ultra Dock and Classic Dock. Four-step straight ladder has three mounting holes and bolts to bracket at a 10-degree angle.

Classic part# D1LADAC Ultra part# D1LADAU

Judge, Northern Lights, and Floe require Ultra Bracket.

Classic Bracket Only part# D1LADC1

Ultra Bracket Only part# D1LADU1

Optional Galvanized Speed-Release

Used with galvanized and blue powder-coated ladders only.

Speed-release part# DH27271

Heavy-Duty All-Aluminum Ladder

Ladder constructed of heavy-duty 1-1/2” square aluminum to resist corrosion. Ladder features 3-1/2” extruded aluminum channel serrated to produce a non-skid surface rung with no sharp edges. Ladder rated 665 lb per rung.

4 steps part# D1LADA4

4 steps (2 piece) part# D1LADA42

6 steps part# D1LADA6 6 steps (2 piece) part# D1LADA62

Ladder Mounting Hardware

Hardware for mounting 4 and 6 step ladders. Used with deck thickness up to 2-1/2”.

part# D1LADM

Aluminum Ladder Hinges

Aluminum hinge allows you to swing ladder to an upright position. (Drilling required in ladder.)

One pair part# D1LADH

Wave Armor Ladder

This unique ladder is constructed with 100% high-density polyethylene. This dock ladder Integrates perfectly with the Wave Armor system. Folds up and out of the water when not in use. Bottom section of ladder floats.

part# DF300081

Ladders and Steps

Indicates this product is shippable via UPS from your local dealer or visit us online at www.hewittrad.com.

Aluminum Dock 5-Step

Heavy-duty aluminum construction provides solid footing. 5-step with 3-1/2” tread step, two hand railings and two 16” legs.

Aluminum Dock 5 Step part# D1STEP5

Dock 4-Step

These all aluminum steps offer a 2” x 5-1/2” powder coated tread, ideal for young children to the elderly. Ensures safe entrance or exit from the water. The step system comes with attachment bracket that fits most docks, two hand railings and two 16” front legs with pads.

Dock 4 Step - White part# D1STEP4

Dock 4 Step - Beige part# D1STEP4B

Optional 25” Legs part# D1STEP5L25

Dock 3-Step with Solid Sides

Perfect for areas with a rise from the shore to the deck of the dock. Aluminum construction with 36” powder coated stair treads. Top step is 24” tall, longer lengths available.

Dock 3 step stairs (beige) part# D1STEP3B

Dock 3 step with railing (beige) part# D1STEP3BWR

Dock 3 step stairs (white) part# D1STEP3W

Dock 3 step with railing (white) part# D1STEP3WWR

Beige White

Beige White

Custom Adjustable Steps

Need something unique?

Custom designs, custom widths and lengths, custom colors and painted handrailings available.

Step tread is 9.6” Optional non-adjusting steps have 2” x 8” side tube. Railing and side rails shown above include custom paint option.

Optional Non-Adjusting Steps

Adjustable Steps

The All-Terrain staircase is made entirely of corrosion resistant aluminum. All components are ruggedly constructed, yet lightweight, for easy handling and assembly. Stair treads and landings are made from the same high-quality QT powder coated aluminum and ThruFlow™ decking that is available on Hewitt Docks. The baked-on finish provides sure footing even when wet. See dealer for ThruFlow™ decking.

3’ Adjustable steps (3’ to 4-1/2’) part# D1STEPA3

5‘ Adjustable steps (5’ to 7-1/2’) part# D1STEPA5

3‘ Adjustable steps (beige 3’ to 4-1/2’) part# D1STEPAB3

5‘ Adjustable steps (beige 5’ to 7-1/2’) part# D1STEPAB5

Adjustable Dock to Step Bracket

Used to mount Hewitt adjustable steps to a deck, seawall side or end of Roll-A-Dock. Custom brackets available for other docks. The adjustable dock step bracket allows for ascending or descending scenarios.

part# D1STEPDMB-1

(For original style steps)

part# D2STEPDMB (For new style steps)

Classic Step

Used to mount Hewitt adjustable steps to side or end of a classic dock. Custom brackets available for other docks. The adjustable dock step bracket allows for ascending or descending scenarios.

part# D1STEPDMBC-1

(For original style steps)

One step with brackets.

part# D2STEPDMBC

(For new style steps)

One pair - brackets only.

Beige

ThruFlow™ White

BEIGE WHITE GRAY

ThruFlow Bullnose Step Aluminum Bullnose Step

Kayaks and Accessories

Indicates this product is shippable via UPS from your local dealer or visit us online at www.hewittrad.com.

Our basic model made for the beginning paddler. Molded construction features beverage holders, footrests and handles. Spacious cockpit and high-speed hull. High-impact polyethylene provides maximum UV protection and superior stability. Available in blue or yellow.

Overall Dimensions: 8’6”L x 30”W x 15”D

Cockpit Dimensions: 4’L x 23”W x 6”D

185 lb Weight Capacity

36 lb Kayak Weight

Kayak (blue) part# DF300440

Kayak (yellow) part# DF300441

Sit-on-top style kayak is comfortable and ultra-stable. Designed for use on lakes or slower moving rivers by paddlers of all abilities. Weatherproof roto-molded polyethylene construction. Adjustable foam seat cushion, rear compartment and molded beverage holder, handles and grips provide added comfort. Available in blue or yellow.

Overall Dimensions: 10’L x 32”W x 10”D

Cockpit Dimensions: 4’L x 23”W x 6”D

300 lb Weight Capacity

45 lb Kayak Weight

Kayak (blue) part# DF300442 Kayak (yellow) part# DF300443

Includes foam/neoprene seat cushion.

Kayak Paddle

Two-piece, 7’ paddle easily breaks down for storage and transport.

Paddle part# DF300089

Impulse Kayak

Cruizer Kayak

Aluminum Kayak/Canoe Rack

Solid 1-1/2”x1-1/2” aluminum rack stores kayak/canoe with ease. Includes paddle shelf and four loop tension cords. One Pair part# D1KR

Kayak Launch Loops

Heavy-duty aluminum frame loops to assist with getting in and out of kayaks and canoes. Six adjustable settings.

part# D1KLT

part# D1KLW

part# D1KLC

Plastic Kayak Rack

A sturdy and stylish kayak rack is a great solution for waterfront storage. Features molded-in kayak hook receivers to secure kayak to rack. Attaches to Wave Armor Dock or special brackets available for mounting to truss or wood docks.

For Wave Dock part# DF300107 (pair)

Kayak Rack & Brackets for Truss and Wood Docks part# DF300107K

Bracket only for Truss and Wood Docks (1) part# DF300107B

Kayak Rack

Kayak Rack

DF300109

Optional 7’ Guide Bunk part# NABPBP

part# D1KLT (Must also purchase 2-D1BUVDU1 and DUAPR1)

Paddle Board Rack

1-1/2” x 1-1/2” aluminum frame with 1” x 1” support arms. Arms have heavy-duty rubber sleeve for extra protection.

part# D1PAT

Dock Gates and Mat Rack

Indicates this product is shippable via UPS from your local dealer or visit us online at www.hewittrad.com.

All-aluminum gate can be mounted to end of dock, gangways or ramps. Special widths available. Includes latch and key.

Security Gate

4’ Security Gate part# DGATES4

6’ Security Gate part# DGATES6

1-1/2” x 1-1/2” aluminum rack stores your water mat. Includes tension cords and fits dockside tubes up to 1-1/4”

Tension Cord Bracket Fits 1-1/4” Tube

Float Tanks and Otter Accessories

Float Tanks

Used to construct a floating dock or raft. Also useful for adding sections to an existing dock. Over 40 different sizes available.

“The most important component of your floating dock is the flotation that keeps the dock floating.”

What you can’t see is vital to the performance of our floating docks! Unarguably the most sought after floats (based on sales volume) in the marina market are from Premier, because they meet ALL of the important design, engineering, manufacturing, shipping, storage and installation standards that give you the best performance and value.

One piece molded rotational drum: Foam filled, molded in mounting slots, heavy-duty mounting flanges, air relief vent, 8 year limited warranty (non-prorated).

Heavy Mounting Flanges 1-1/4” To 1-3/4” Thick Stronger Attachment Points

Ribs

Top, Bottom, Sides For Extra Strength

Threaded Vent Plug Prevents Heat Build-up

Molded Mounting Slots 9/16” Wide x 1-1/2” Long –Completely Water Tight; Easier Fastening

Roto-Molder Encasement For One-Piece Construction –Meets The ASTM Falling Dart/Puncture Test

EPS Foam Filled Meets The Hunt 7-Day Water Absorption Test Of Less Than 3.0 lbs/cu.ft.

Heavy Nominal Wall Thickness Of .150” Minimum Of .125”

Float Tank Brackets

Brackets for connecting float tanks to a Roll-A-Dock frame. Includes hardware. Part number includes one pair for one float.

4’ Wide part# D1FBS42

6’ Wide part# D1FBS62

Lag Bolt Set for wood

Attach flotation drums to dock system.

3/8” x 2” galvanized lag bolt part# NB382L

3/8” x 3” galvanized lag bolt part# NB383L

3/8” x 5” galvanized lag bolt part# NB385L 3/8” SS flat washer part# NW38FL

Structural

Otter ATV Trailers

Indicates this product is shippable via UPS from your local dealer or visit us online at www.hewittrad.com.

Xpress 15 Trailer

• High Clearance Frame with 3/4D Solid Steel Axle

• Steel Wheels w/ Integrated Greaseable Roller Bearings

• Industry Strongest Roto-Molded Trailer Body

• Molded-In Power-Rail Frame

• Reinforced Outer Lip For Remarkable Wall Strength

• Tilt-N-Swivel Side & Rear Dumping w/ Tipper Latch

• Standard Pin Style Hitch Attachment

Dimensions: 65L x 36W x 14D Load Capacity: 1500 lbs

Tires: 18 x 7 x 8 Floatation Turf Tires Cubic Ft. of Space: 15 ft

part# DFA201234

Protect your gear and your load with a Rhino Xpress 20 Trailer Cover. The heavyweight fabric is extremely durable and water-resistant, with a sewn-in shock cord into the hem to seal out the elements. Designed to fit Xpress 20 Off-Road Trailer.

part# DFA200847

• Haul up to 15 Cubic Feet and 1500 Pounds

• 10 Year Warranty on Trailer Bed and 1 Year Warranty on Trailer Components

Super Xpress 20 Trailer

4-bolt hub assembly with greaseable tapered roller bearings.

Dimensions: 65L x 46W x 14D

Load Capacity: 1500 lbs

Cubic Ft. of Space: 20 ft

Tires: 18 x 9.5 x 8 Floatation Turf Tires

part# DFA201244

Xpress 20 Trailer

• High Clearance Frame with 3/4D Solid Steel Axle

• Steel Wheels w/ Integrated Greaseable Roller Bearings

• Standard Pin Style Hitch Attachment

• Optional 2D Ball Coupler Attachment

• Tows Smoothly Behind any ATV / UTV

• Molded-In Power-Rail Frame

• Reinforced Outer Lip For Remarkable Wall Strength

• Tilt-N-Swivel Side & Rear Dumping w/ Tipper Latch

Dimensions: 65L x 46W x 14D Load Capacity: 1500 lbs Tires: 18 x 8.5 x 8 Floatation Turf Tires Cubic Ft. of Space: 20 ft

part# DFA201239

Constructed of 100% thick, and rugged Roto-Molded Polyethylene. Simply attach this Accessory to your Rhino Rear ATV Box for the simplest way to carry 5 gallon buckets with you during transport. With no tools necessary for installation, you simply need to slide this tank onto the built-in accessory attachment points.

part# DFA200829

Auger Shield

Revolutionary Auger Shield is a full-length ice auger boot that completely encases the auger blade. Constructed of 100% thick and rugged Roto-Molded polyethylene plastic, it protects your expensive gear from being damaged by the sharp, metal edge of your auger blade while protecting the blade itself. A built-in carrying handle makes for easy transport and allows you to conveniently store your shield by hanging it on the wall. Designed for standard length augers. Our Auger Shield fits a 10” auger drill.

part# DFA200553

Travel Cover

Bucket Holder

Commercial-grade (1/4”) dock hardware is designed for use with 1-1/2” thick lumber (minimum width 6”). All hardware is mounted with 3/8” carriage bolts. All male and female dock to dock connections are made with either 3/4” bolts with lock nuts or 3/4” connecting pins.

Galvanized Dock Hardware

Wood Dock Plan Kit will show you the basics on building a lightweight and long-lasting floating dock system.

Galvanized Dock Hardware

Indicates this product is shippable via UPS from your local dealer or visit us online at www.hewittrad.com.

Lag Bolt Set

Attach flotation drums to dock system.

3/8” x 2” galvanized lag bolt part# NB382L

3/8” x 3” galvanized lag bolt part# NB383L

3/8” x 5” galvanized lag bolt part# NB385L

3/8” SS flat washer part# NW38FL

Carriage Bolt Set

Includes bolt, flat washer and nut.

3/8” x 2-1/2” SS Carriage Bolt part# NB38212C

3/8” SS Flat Washer part# NW38FL

3/8” Brass Nut part# NN38S

1/2” x 3” “M” SS Carriage Bolt part# NB123C

1/2” SS Flat Washer part# NW12FL

1/2” Coated Nut part# NN12S

3/4” x 3-1/2” “N” SS Hex Bolt part# NB34312G

3/4” SS Flat Washer part# NW34FL

3/4” Coated Nut part# NN34L

Connector Pin Set “O”

For quick disconnect. Used to connect male and female T connectors.

3/4” Connector Pin & Hitch Clip Pin part# DH26531

Volume Pack 48 pcs

Aluminum Transition Plate

Create a smooth transition between dock sections or seawall.

4’ part# D1TP4

6’ part# D1TP6

8’ part# D1TP8

12’ part# D1TP12

4-15/16” 3-1/12” 2-1/12”

Pipe Holder/

3” Outside “K”

Bolts to outside of dock. Use 2” pipe to hold dock in place.

Pipe Holder part# DH26411

Volume Pack 24 pcs

Heavy-Duty Roller Assembly “T”

Assist vertical motion of the dock in tidal action areas. 6” roller, 3/8” bracket.

HD Roller Assembly “T” part# DH26414

Replacement Roller Only part# DH48939

Heavy-Duty Aluminum Transition Plate

With replaceable wear guard.

4’ part# D1TPHD4

5’ part# D1TPHD5

6’ part# D1TPHD6

8’ part# D1TPHD8

Weld hinge to your ramp/gangway, dock or seawall.

part # ADD-00114

1/2” x 5” SS Hex Bolt part # NB125G

1/2” Coated Hex Lock Nut part #NN12L (Three are used on each plate.)

Outside Corner End “C”

Use at ends of fingers and docks. Ideal for swim floats.

Each Leg Is 10”L x 5”H.

Outside Corner End “C” part# DH26402

Inside Corner “D”

Heavy-duty inside corner should be used with an outside corner.

Inside Corner “D” part# DH26403

Volume Pack 32 pcs

Inside Rolling Ramp Bracket

Includes left and right ramp brackets.

5”x11” x 1/4”

Inside Rolling Ramp Bracket part# DH26431

Replacement Roller Only part# DH48939

Inside Corner/ 3” Pipe holder “E”

Use with one of the outside corners and as an internal pipe holder for dock frame strength.

8-1/2”L x 5”H.

3” Pipe Holder ”E” part# DH26404

Volume Pack 16 pcs

Inside Corner/ 2” Pipe holder “E”

Use with one of the outside corners and as an internal pipe holder for dock frame strength.

8-1/2”L x 5”H.

2” Pipe Holder ”E” part# DH26405

Volume Pack 16 pcs

Galvanized Dock Hardware

Indicates this product is shippable via UPS from your local dealer or visit us online at www.hewittrad.com.

Chain Retainer “J”

Use weights and chains to hold dock in place. Accommodates 1/4”, 3/8”, & 1/2” Chain. 5”L x 5”H.

Chain Retainer “J” part# DH26410

Volume Pack 24 pcs

Washer Plate “I”

Use two washer plates with each angle.

Washer Plate part# DH26409

Volume Pack 48 pcs

Outside Corner (Male)

“B”

1/2” welded tab. Use with a female outside corner to connect docks end to end.

Each leg 10”L x 5” H.

Outside Corner (Male) “B” part# DH25491

Volume Pack 24 pcs

Female T Connector “G”

Two welded 1/2” tabs. Bolts to side of dock to attach fingers and ramps.

Female T Connector “G” part# DH26407

Volume Pack 24 pcs

Cleat Angle

Slots accommodate various cleat sizes.

Cleat Angle part# DH26422

Volume Pack 48 pcs

Male T Connector “H”

Welded 1/2” Tab. Use with female T connector to attach fingers and ramps.

Male T Connector “H” part# DH26408

Volume Pack 24 pcs

Back-Up Plates “Q”

Use 5”x 5” reinforcing plates to back up Single T Males and Females.

Back-Up Plate “Q” part# DH26413

Volume Pack 40 pcs

Angle “F”

Heavy-Duty angle for cross supports.

Angle “F” part# DH26406

Volume Pack 48 pcs

Outside Corner (Female) “A”

Two 1/2” welded tabs. Use with a male outside corner.

Each Leg 10”L x 5”H.

Outside Corner (Female) “A” part# DH26400

Volume Pack 24 pcs

Dock Packages

Dock planning made easy with our Dock Hardware Planning Guides.

Dock Hardware Planning Guide in PDF format available for download at glmarineproducts.com.

PDF Planning Guides

• 10’x20’ Wood Main Dock

• 8’x20’ Wood Main Dock

• 4’x20’ Wood Main Dock

• 6’x20’ Wood Main Dock

• Typical U-Dock

• 3’x20’ Wood Finger Dock

• 12’x12’ Wood Swim Float

• 10’x10’ Wood Swim Float

• Main Dock Decking

Wood Finger Dock

Wood Main Dock 10’x20’ Wood Main Dock

Piling Rings and Caps

Indicates

14” Interior Pile Guide

14” clearance for square or round pile. Guide with four rollers.

14” Interior Pile Guide part# DH26434

Volume Pack 12 pcs

Piling Rings with Four Rollers and Removable End

8” Dock pile ring (10” opening)

10” Dock pile ring (12” opening)

12” Dock pile ring (14” opening)

Custom Dock pile ring (made to your size) part# DABPR

Piling Caps

Keep birds from roosting in your pilings. Mildew inhibitors and UV stabilized. Available in white or black.

Flat Piling Cap

Black 6.5” Flat part# FPC65B

White 7” Flat part# FPC7W

Black 7” Flat part# FPC7B

White 7.5” Flat part# FPC75W

Black 7.5” Flat part# FPC75B

White 8” Flat part# FPC8W

Black 8” Flat part# FPC8B

White 9” Flat part# FPC9W

Black 9” Flat part# FPC9B

White 10” Flat part# FPC10W

Black 10” Flat part# FPC10B

White 10.5” Flat part# FPC105W

Black 10.5” Flat part# FPC105B

White 11” Flat part# FPC11W

Black 11” Flat part# FPC11B

White 12” Flat part# FPC12W

Black 12” Flat part# FPC12B

13” Piling Hoop with Roller and Removable End

13”x13” Pile hoop with roller and removable end for up to 12” pile.

part# DH26423

Cone Piling Cap

White 7.0” Cone part# CPC7W

Black 7.0” Cone part# CPC7B

White 7.5” Cone part# CPC75W

Black 7.5” Cone part# CPC75B

White 8.0” Cone part# CPC8W

Black 8.0” Cone part# CPC8B

White 8.5” Cone part# CPC85W

Black 8.5” Cone part# CPC85B

White 9.0” Cone part# CPC9W

Black 9.0” Cone part# CPC9B

White 9.5” Cone part# CPC95W

Black 9.5” Cone part# CPC95B

White 10.0” Cone part# CPC10W

Black 10.0” Cone part# CPC10B

White 10.5” Cone part# CPC105W

Black 10.5” Cone part# CPC105B

White 11.0” Cone part# CPC11W

Black 11.0” Cone part# CPC11B

White 11.5” Cone part# CPC115W

Black 11.5” Cone part# CPC115B

White 12.0” Cone part# CPC12W

Black 12.0” Cone part# CPC12B

Lift Bumpers, Full-Length Guides and Motor Stop

Indicates this product is shippable via UPS from your local dealer or visit us online at www.hewittrad.com.

24”and 36” Plastic Bumpers

High-strength polyethylene plastic formulated with UV protection for the marine environment. Mount to square poles with recessed mounting holes.

Colors: White, Black, Green, Tan, Light Gray. Volume Pack 24 pcs

24” Bumpers

2” slot-White part# D1BUVP24W

2” slot-Black part# D1BUVP24B

3-1/2” slot-White part# D1BUVP243W

3-1/2” slot-Black part# D1BUVP243B

3-1/2” slot-Light Gray part# D1BUVP243GYL

36” Bumpers

2” slot-White part# D1BUVP2W

2” slot-Black part# D1BUVP2B

2” slot-Green part# D1BUVP2G

2” slot-Tan part# D1BUVP2TN

2” slot-LightGray part# D1BUVP2BGYL

2-1/2” slot-White part# D1BUVP212W

2-1/2” slot-Black part# D1BUVP212B

2-1/2” slot-Light Gray part# D1BUVP212GYL

(Mounted to 2x2 tube. Requires 2 bolts, 2 nuts and 4 washers per bumper)

3/8” x 3-1/2” SS Hex Bolt part# NB38312G used with tube thickness up to 2”

3/8” Brass Nut part# NN38S

3/8” SS Flat Washer part# NW38FL

36” Bumpers

3-1/2” slot-White part# D1BUVP3W

3-1/2” slot-Black part# D1BUVP3B

(Mounted to 3x3 tube. Requires 2 bolts, 2 nuts and 4 washers per bumper)

3/8” x 4-1/2” SS Hex Bolt part# NB38412G used with tube thickness up to 3”

3/8” Brass Nut part# NN38S

3/8” SS Flat Washer part# NW38FL

X36” Bumpers

X36” Plastic with 3-1/2” Slot-White part# D1BUVP312W

X36” Plastic with 3-1/2” Slot-Black part# D1BUVP312B

(Mounted to 3x3 tube. Requires 2 bolts, 2 nuts and 4 washers per bumper)

3/8” x 6” Bolt part# NB386G used with tube thickness up to 3”

3/8” Brass Nut part# NN38S

3/8” SS Flat Washer part# NW38FL

Hydraulic Motor Stop

This design fits new rubber bunks. Carriage bolts slide into track on outside of bottom bunk and plates are attached on the outside. There are two hole patterns on the plate for height adjustment. The extensions are 24” long for length adjustment and then finished off with a 36” plastic bumper. Motor stop for older lifts available.

Single Motor 4,400-10,100 part# LMSHYS

Double Motor 4,000-10,100 part# LMSHYD

Large Double Motor 12,100-24,100 part# LMSHYD2

Motor Stop

Protect your motor from overrunning the lift.

For cantilever and vertical lifts

Small part# LMS

Large Adjustable part# LMSL

For Proteus Lift part# LMSP

Hydraulic Bow Stop

This design fits new rubber bunks. 11’ custom extrusion slides into the bottom bunk with 8’ of adjustment inside the bunk and is secured with two 1/2” set screws. Bow stop for older lifts available.

Hydraulic Stop

2,500-10,100 part# LBSHY

Bow Stop

Bow stops are used for rough water or outdrive ski boats to keep boat from overrunning the lift.

Standard Stop for cantilever and vetical lifts part# LBS

Large Bow Stop for 4600-6600 part# LBSHD

Bow Stop for Proteus lift part# LBSHD Drilling required

Foam Post Bumper Bumper slides over 1-1/2” OD pipe and also serves as replacement foam for centering guides. part# D1BUF

Boat Port Side Walk Brackets

Bolts onto Boat Port cross-beams to create a side walkway. (Planks not included.)

One Bracket part# LBPWB

2- tank lift uses 4 brackets per side

3- tank lift uses 5 brackets per side

Full-Length Guide Step

Full-length guide steps aid in guiding your boat into the same position every time. Vertical and horizontal adjustment support for getting in and out of your boat.

Carpeted

12’ Standard for 1800 - 5200 part# LFLCG

14’ Standard for 1800 - 5200 part# LFLCG14

(Standard also fits hydraulic 4400-8100)

12’ Medium for 1600 - 3800 part# LFLCGH

14’ Medium for 1600 - 3800 part# LFLCGH14

12’ 4600 for 4600 HL part# LFLCG46

14’ 4600 for 4600 HL part# LFLCG4614

12’ Large for 5600 - 6600 HL part# LFLCGHL

14’ Large for 5600 - 6600 HL part# LFLCGHL14

Boat Port Front Walk Brackets

Bolts onto front of Boat Port to create a side walkway. One needed per side. (Planks not included.)

One Bracket part# LBPWBF

Aluminum Guide Step

Aluminum guide step is 13’ 6” and carpeted 2” x 6” bunk is 14’. Aluminum guide step has pre-drilled holes. Bunk attached by six 3/8” lag bolts. The top flat of the guide step extension slides in from end. The top flat is drilled and tapped for quick adjustment.

Standard 1800 - 5200 part#LFLAG

(Standard also fits 4400-8100)

Medium 1600 - 3800 part#LFLAGH 4600 4600 part#LFLAGH46

Large 5600 - 6600 part#LFLAGHL

Hydraulic Full-Length Outriggers

Allows you to install guides onto hydraulic lifts. Keep in mind, two pair are needed –one pair for each side of lift.

One pair

2,500-8,100 part# LFLCGHYB

14’ Carpeted Pontoon Guides

30” Support with four 14’ carpeted bunks to help guide your pontoon into the lift.

Standard 1800 - 5200 part# LFLCGCP14

(Standard also fits hydraulic 4400-8100)

Medium 1600 - 3800 part# LFLCGCH14 4600 4600 part#LFLCGCP46

Large 5600 - 6600 part# LFLCGCPL14

Various shapes and sizes of aluminum are available for sale. Contact your local dealer for details.

Centering Guides and Catwalk

Cushion Bumper

Upper and lower lip wrap around the lift post. Waffle effect backside for additional cushioning. Marine-grade PVC.

Colors: White, Black, Blue, Light Gray

White part# D1BCBWE

Black part# D1BCBBK

Blue part# D1BCBBE

Light Gray part# D1BCBGYL

(8 fasteners recommended per bumper, see page 8.) Volume Pack 24 pcs

30” Plastic Pontoon Guides for Cantilever Lifts and PWC Lifts

These guides feature shock absorbing rubber bushings at the base and durable 24” plastic bumpers to help guide your pontoon boat into the lift.

White part#LCGBPP

36” Plastic Centering Guides

These guides feature shock absorbing rubber bushings at the base and durable plastic bumpers.

Standard fits up to 3” wide by 3” tall beds part# LCGBP

Hi-Lifter fits up to 3” wide by 5” tall beds up to 4,500 lbs. part# LCGBPHL

For Proteus lift part# LCGBPPO

Heavy-Duty Centering Guides

The name says it all. Our heavy-duty centering guides feature shock absorbing springs at the base and durable plastic bumpers that won’t mar your boat’s finish. Fits tubes up to 3-3/4” w x 8” h.

Ratchet

mooring cleat Harbor Straight Bumper iling Bumper Truss Bumper

This guide bolts onto a 3” tube. Roller aids in guiding boat onto lift.

One pair part# LNPGR

Narrow Pontoon Front Stop

Stop pontoon from overrunning lift.

One pair part# LNPFS

Catwalk

All aluminum brackets with mounting hardware, to make side mounted catwalk for cantilever, vertical and hydraulic lifts with canopy or free standing canopies (planks not included).

One Pair for Cantilever Lift part# LCWB

One Pair for Hi-Lift Verticals (drilling required) part# LCWBHL

Get more stability out of your narrow pontoon lift with these stabilizer bars. All aluminum with hardware.

One pair part# LNPSB

Narrow Pontoon Guide Roller

Narrow Pontoon Stabilizer Bars

Pontoon Conversions and Accessories

Indicates this product is shippable via UPS from your local dealer or visit us online at www.hewittrad.com.

Pontoon Rack Kit

Convert your regular lift into a pontoon lift with these heavy-duty aluminum brackets and hardware. Rack lifts under the boat’s deck, adds life to the boat’s tanks. Also useful as a landing guide to center your boat over the lift. There are two different rack styles, (shown at left) pontoon rack with wood, (shown at right) aluminum adjustable rack kit

Standard Rack Kit: 1800 Wide, 2400-5200 Cantilever part# LNPRKS part#LNPRKAS

Medium Rack Kit: 1800 Roll-A-Rail, 1600-3800 Hi-Lifter part# LNPRKM part#LNPRKAM

4600 Rack Kit: 4600 Hi-Lifter part# LNPRK46 part#LNPRKA46

Large Rack Kit: 5600HL, 6600HL part# LNPRKL part#LNPRKAL

Proteus Rack Kit: part# LNPRKP part#LNPRKAP

Optional Guide Rollers

For Adjustable Aluminum Rack Kit

Roller aids in guiding boat onto lift. One pair part# LNPGR

* Aluminum adjustable rack kit works on tritoons.

Vinyl Pontoon Bed

Convert your regular lift into a pontoon lift using the 14’ vinyl bunks, to be installed in a “V” shape. This vinyl bed fully cradles your pontoons.

One set Twin Tube Triple Tube

1800-5200 Cantilevers part# LNPCVB part# LNPCVB1/2

1600-3800 Hi-Lifter part# LNPCVBH part# LNPCVBH1/2

4600-6600 Hi-LIfter part# NA part#LNPCVBHL1/2

Proteus part# LNPCVBP part# LNPCVBP1/2

Carpeted Pontoon Wood

Bed

Convert your regular lift into a pontoon lift using the 14’ carpeted bunks, to be installed in a “V” shape. This wood bed fully cradles your pontoons.

One set Twin Tube Triple Tube

1800-5200 Cantilevers part# LNPCWB part# LNPCWB1/2

1600-3800 Hi-Lifter part# LNPCWBH part# LNPCWBH1/2

4600-6600 Hi-LIfter part# NA part# LNPCWBHL1/2

Proteus part# LNPCWBP part# LNPCWBP1/2

Bunks and Bunk Treads

Indicates this product is shippable via UPS from your local dealer or visit us online at www.hewittrad.com.

Trailer Jack Stand Donut

Keep your trailer jack from sinking into the ground or moving.

Marine-grade PVC.

Trailer Jack Stand Donut part# D1BJD

Replacement Carpet

Heavy-duty all-weather carpet with thick backing is designed to replace worn and frayed bunks. The marine-grade carpet will not rot or mildew. UV fade and fray resistant. One of the strongest on the market!

Weight: 14 oz. per square yard

Material: Interlocked Polypropylene Fibers

Backing: 10 oz. Marine Back

11” x 30’ for two 14’ 1” x 4” part# LCARPETV

16” x 30’ for two 14’ 2” x 6” part# LCARPETB

20” x 30’ for two 14’ guides part# LCARPETG

26” x 30’ for two 14’ 2” x 10” part# LCARPETBL

Bunk Glide On

Slide easily on or off. Self Centering and constructed with enhanced PVC. For painted, fiberglass or aluminum boats. Fits Standard bunk boards. (Includes mounting screws.)

2”x6” - Four 13” end caps, Four 36” middles

White 2” x 6” Glide On part# D1BG26WE

Black 2” x 6” Glide On part# D1BG26BK

2”x4” - Four 50” pieces

White 2” x 4” Glide On part# D1BG24WE

Black 2” x 4” Glide On part# D1BG24BK

PWC Bunk Upgrade

Aluminum Tube with extruded non-scratch plastic glides with UV protection. Sold as 1.

2” x 4” x 84” for 1150, 2300 PWC part# NAM0916

2” x 4” x 72” for 1100HL part# L1PWB11

Bunk Spacer

A Bunk Spacer will be used on Aluminum bunk PWC lifts and also pontoons with an elliptical pontoon. Adds 2-1/2” of height.

part# LBSK212

Aluminum Rubber Bunks

All aluminum 3-1/4” x 3-1/4” bunk with an extruded ribbed rubber surface. Bunks sold in pairs (2).

Length Part #

12’ LBAR12

14’ LBAR14

Carpeted Full-Length Bunks

Full-Length Bunks are made from pressure treated lumber and covered with premium grade marine carpeting. Carpeting is highly resistant to mildew and rot. Bunks sold in pairs (2). Size Length Part #

2” x 6” 12’ LFLB12

2” x 6” 14’ LFLB14

2” x 10” 12’ LFLBL12

2” x 10” 14’ LFLBL14

Aluminum V-Bunk

Solid 3” x 3” aluminum tube with a carpeted, pressure treated bunk or 3-1/4” x 3-1/4” alumium with rubber bunk used on all outdrive ski boats. Bunks sold in pairs (2).

Length Wood Part # Rubber Part #

12’ Standard 1800 Wide - 5200 Cantilever LVBA LVBAR12

14’ Standard 1800 Wide - 5200 Cantilever LVBA14 LVBAR14

12’ Medium 1800, 1600 - 4600 HL LVBAH LVBARH12

14’ Medium 1800, 1600 - 4600 HL LVBAH14 LVBARH14

12’ Large 5600 - 6600 HL LVBAHL LVBARHL12

14’ Large 5600 - 6600 HL LVBAHL14 LVBARHL14

Various shapes and sizes of aluminum are available for sale. Contact your local dealer for details.

Shown with wood.

Shown with rubber.

Lift Legs and Extensions

Indicates this product is shippable via UPS from your local dealer or visit us online at www.hewittrad.com.

Leveling Legs

A variety of lengths of leveling legs are available to assure level lift installation in deep water or on an uneven lake or river bed.

18” long 1-1/2” x 1-1/2” sq. part# LL182 – for 1150 and 2300 PWC

30” long 1-1/2” x 1-1/2” sq. part# LLH3 – for Narrow Pontoon Lifts

36” long 1-1/2” x 1-1/2” sq. part# LL132 – for 1150 and 2300 PWC

60” long 1-1/2” x 1-1/2” sq. part# LL152

36” long 2” x 2” sq. part# LL232

72” long 2” x 2” sq. part# LL262

96” long 2” x 2” sq. part# LL282

36” long 3” x 3” sq. part# LL332

72” long 3” x 3” sq. part# LL362

96” long 3” x 3” sq. part# LL382

30” long 2-5/8” x 2-5/8” sq. part# LLH32

72” long 2-5/8” x 2-5/8” sq. part# LLH62

96” long 2-5/8” x 2-5/8” sq. part# LLH82

84” long 3” x 3” sq. part# LLH72

Leg Pins and Setscrew for Leveling Legs

For quick and easy height adjustments to leveling legs.

1/2” x 1” setscrew part# LLSS

1/2” x 2” setscrew part# LLSS2

2-1/2” leg pin with clip part# LLP2/2

3-1/2” leg pin with clip part# LLP3/2

4” leg pin with clip part# LLP4

4-1/2” leg pin with clip part# LLP4/2

3”x3” Adjustable Screw Leg

Have fluctuating water? Adjustable screw legs mount on the outside of lift and operate with a simple cordless drill. 30” of total adjustment. Features patent-pending brake and stop bolt. Fits Cantilever Lifts 30004800lbs. Back only of 3900-5200. Optional screw drive bit available.

3’ x 3’ part# LLSA

Adjustable Screw Leg Option

Hi-Lifter Adjustable

Screw Leg

Replaces existing leveling leg. The Hi-lifter adjustable screw legs mount on the outside of lift and operate with a simple cordless drill. 30” of total adjustment. Features patent-pending brake and stop bolt. Fits Hi-Lifts 2600-6600lbs.

2-5/8” Legs without exchange part# LLSAHL

2-5/8” Legs with exchange part# LLSAHLX

Leveling Legs

Extensions

Add onto existing leveling legs without buying a whole new leg.

2” x 2” part# LL2E

3” x 3” part# LL3E

Optional screw drive bit for adjustable screw legs. Does not work on classic dock screw legs.

part# LLSAB

Hewitt rubber caps are tough and very durable. They help cover sharp edges and fit snug to ensure they stay in place. This rubber material has a UV inhibitor to protect it from the elements.

Square Rubber Caps

Volume Pack

Large Aluminum Pad

Gives leveling legs greater support in soft or sandy lake bottoms. Installs to bottom of existing pad. Drilling required for installation.

Square Plastic Hole Plugs

Volume Pack 100 pcs 1-1/2” square 1-1/4” D1PC1SQ

square

square

Tie-Downs and Augers

Leveling Leg Bracing

Used to stabilize long leveling legs. Price includes parts for two legs.

2” x 2” for 1800 Cantilever part# LL2BR

2” x 3” for 2400 Cantilever part# LL2BR24

3” x 3” for 3000-4800 Cantilever part# LL3BR

2-5/8” x 3” for 2600-6600 Hi-Lifter part# LLHBR

4100, 6100, Hydraulic part# LLHYBR 8100, 10100, 12,100 Hydraulic part# LLHYBR8

High-Wind Tie-Down

Tie-Down

Personal watercraft and small boat mooring made easy. Simply screw in. Removable handle stows inside anchor tube.

part# L1TD

Extra anchoring for your boat lift in rough or high-wind areas. Attaches to any rectangle or square tube up to 3”x3”. Includes hardware, adjustable bracket, screw auger and two 5’ aluminum posts.

High-Wind Tie Down Kit (2) part# LLTD

Drilling required on hydraulic lifts

Post Ratchet

Provides leverage to easily install and remove pipes with augers. This 19” handle and reversible ratchet fits 1-1/4”, 1-1/2’, and 2” pipes up to 2-1/4” O.D.

part# DAPR

Lift Wheels

Indicates this product is shippable via UPS from your local dealer or visit us online at www.hewittrad.com.

Corner Assist Wheel Kit

Makes lift installation and removal much easier: they’re quick to set up, lightweight, easy-to-use, and may be used on several lift sizes without permanent attachment.

1200-1800 Cantilever part# LWCS

2400-5200 Cantilever part# LWCL

1100-1600 Hi-Lifters (with welded plastic slide) part# LWCH

4100-10100 Hydraulic (Bracket slides over leveling leg) part# LWCHY

2600-6600 Hi-LIfters (with rollers and bolt-on corner slides) part# LWCHL

Lift Ease

Boatlift adjustable screw wheel kit features a full-length mounting extrusion and is attached to the lift in two locations. Built-in tire brake helps avoid tire rotation when the wheel is not touching the ground. 20-1/2” of adjustment. 27” wheel standard, optional 16” wheel available.

part# LWKE

Exchange 27” wheel for 16” wheel. part# DWHEELSX

Screw Upright with Patent-Pending Brake and Stop Bolt

Nylon Nut

Stainless-Steel Rod Brake Pad (Patent Pending)

Built-In Extension Stop

39” Support Flange for Superior Strength and Support

Simple cordless drill operation. Unmatched heavy-duty design and user-friendly features.

• Screw legs are completely rebuildable to make fixes easy if needed

• Built-in extension-stop prevents the leg from being overextended

• Features stainless-steel rod and maintenance-free nylon nut

• Patent-pending brake pad prevents the leg from self adjusting due to wave action

Adjustable Screw Drive Bit

Fits all screw legs except the classic dock screw legs. part# LLSAB

Cantilever

Hi-Lifter with Plastic Slides

Hi-Lifter with Rollers

Hydraulic

Lift Wheel Kit

Mounts on center of lift. Works great for maneuvering around objects or over sea walls.

For cantilever lifts part# LWK

For narrow pontoon lifts part# LWKNP

Lift Jack

The “Original” lift jack allows you to raise one end of the lift to easily adjust lift legs and assist with installing/removing lift wheels without going under water. Lift jack handle is 36”.

Lift Jack (with non-braking winch) part# LWJ

Lift Jack (with braking winch) part# LWJB

Transportation Bar

Use a boat to move lift in and out of deep water or to a new location.

part# LWTRAN

Lifting Bar

Roll-A-Rail Accessories

Indicates this product is shippable via UPS from your local dealer or visit us online at www.hewittrad.com.

Rail Cross Bar

Clamps onto bottom side of rail track. All aluminum cross bar with adjustable 3’ legs and pads. Recommended 4500 lb rail to be supported every 8’ if track leaves the ground and 6500 lb rail to be supported every 4’. The 5’ cross bar is used to support rail up to 4’ above ground level. In instances that the elevation is above 4’, use the 8’ cross bar for support.

5’ 4500 lb part# LRAL

5’ 6500 lb part# LRALL

8’ 6500 lb part# LRALL8

Rail Cable Guides

Polyethylene guide prevents wear on braces when the degree or slope of land changes.

2 pieces part# LRACG

Rail Tip-Up

Pivoting rail section allows garage or boathouse door to close completely.

part# LRTUP

Mechanical Limit Switch

Mechanical spring driven limit switch prevents you from overlifting your boat on lift. AC/DC Models with remote ONLY!

part# LWHDDSS

Braking Winch

Used on rail if incline is greater than 10° (1.6’ in 16’ elevations).

(Standard on 6500.)

part# LRMSB

Lift Accessories

Hydraulic Pump Box Stands

Mounts over 3” x 3” square tube and keeps your hydraulic pump off your dock and out of the way.

Medium Pump Box part# L1HYPBM (currently what pumps are in)

Cylinder Sleeves

Dress-up vinyl sleeve for cylinders on hydraulic cantilever lifts. Available in seven colors: gray, beige, blue, white, green, yellow and teal. Also available in SeaMark fabric.

part# LHYCS - Color (pair)

Hydraulic Hose Extension Kit

Hoses make it quick and easy to move your pump box away from lift or into a boathouse. Comes with two hoses.

Kit Fits 2500 - 8100lb lifts. 19’ extension part# NAHYHE22

Large Kit Fits 10100 - 24100lb lifts. 19’ extension part# NAHYHEL22

Replacement Key Fob COMMANDER (top) part# LWHDDK LIFT BOSS part# LWHDDF LIFT BOSS replacement battery part# LWHYRBCC GEN3 Remote part# LWHDDK3

SLX Wave Port Attachments and Accessories

Indicates this product is shippable via UPS from your local dealer or visit us online at www.hewittrad.com.

SLX Z-bracket Attachment Kit

Secures port to a fixed dock or sea wall.

2” Kit

part# DF301281

4” Kit

part# DF301282

Telescoping Port to Fixed Dock Kit

2” kit adjusts from 16” to 24”. (Two Ports)

part# DF301434

SLX Port to Port Attachment

Connects a pair or multiple ports side-by-side.

part# DF300046

SLX Post Extension Attachment

Moves poles outside, increasing the distance between the two posts, allowing more room for larger PWCs.

2”Kit

part# DF300095

4” Kit

part# DF300096

SLX Port to Other Floating Dock Brands Hinge Attachment

Kits lock into dock C-channels.

19-3/4 part# DF301308

25-3/4 part# DF301309

SLX Snap-In Cap

Cover unused mounting pockets.

part# DF300116

SLX Bushing

SLX Buoyancy Booster

Installs in the rear pockets, adds additional flotation to the rear of the port, decreasing the rearward pitch for heavier crafts.

part# DF300498

Raised and flat reducer bushing. Raised design increases friction on post mount applications. 2”=2 1/2” ID. 4”=4 11/16” ID.

SLX Port to Wave Dock

part# DF301915

SLX Side Extension

Adds 22” to one side.

part# DF300115

Must purchase one port-to-port to attach side extension.

part# DF300046

Apex Wave Port Attachments And Accessories

Indicates this product is shippable via UPS from your local dealer or visit us online at www.hewittrad.com.

Apex Port to Port Attachment

Connects a pair or multiple ports side-by-side.

part# DF300046

Apex Bushing

Apex Buoyancy Booster

Installs in the rear pockets, adds additional flotation to the rear of the port, decreasing the rearward pitch for heavier crafts.

part# DF300498

Raised and flat reducer bushing. Raised design increases friction on post mount applications.

2”=2 1/2” ID. 4”=4 11/16” ID.

2” Raised part# DF302202

Apex Side Extension

Adds 22” to one side.

part# DF300115

Must purchase one port-to-port to attach side extension.

part# DF300046

4” Flat part# DF301525

Apex to Wave Dock Kit

This receiver bracket slides directly in the H-beam channel of the Wave Dock system.

part# DF301347

Apex Post Extension Attachment

Moves poles outside, increasing the distance between the two posts, allowing more room for larger PWCs.

2”Kit

part# DF300095

4” Kit

part# DF300096

Apex Telescoping Port to Fixed Dock Kit

2” kit adjusts from 16” to 24”. (Two Ports)

part# DF301434

Z-bracket Attachment Kit

Secures port to a fixed dock or sea wall.

2” Kit

part# DF301281

4” Kit

part# DF301282

Apex Snap-In Cap

Cover unused mounting pockets.

part# DF300116

Apex to Floating Dock Kit

These heavy-duty C-Channel brackets allow for direct mount to a floating structure.

part# DF301360

Apex Bolt-In Caps

Finish the look with these bolt-in caps for a sleek finish. (2) part# DF301514

Genesis and Extreme Wave Port Attachments and Accessories

Genesis to Floating Dock Attachment Kit

part# DF301857

Extreme Pipe Sleeves

2” part# DF301746

3” part# DF301747

4” part# DF301748

Genesis and Extreme Buoyancy Booster

Extreme Front Plug Kit (2)

part# DF301749

Designed to fit underneath the entrance sections of the EVO7 and SLX10 series. Each booster delivers an extra 150 lbs of flotation.

part# DF301823

Extreme Pipe Mount to Fixed Dock

2” (24” - 42”) part# DF301409

4” (24” - 42”) part# DF301410

2” Raised part# DF301411

4” Raised part# DF301412

Extreme Floating Dock Kit part# DF301329

Extreme Direct Connect to Wave Dock

part# DF301346

Winches and Wheels

Indicates this product is shippable via UPS from your local dealer or visit us online at www.hewittrad.com.

These braking winches have a completely enclosed gear box with a large cable spool. Crank one way to go up, crank the other way to go down. Stop in any position without flipping a lever.

B-1200 Gear Ratio 4:1 part# LWB12

B-1500 Gear Ratio 6:1 part# LWB15

B-2500 Gear Ratio 12:1 part# LWB25

Winch Top Cover

Protect your winch from the elements with a winch cover.

Hewitt 1501-2001 Winch Top Cover part# LWHWC

Hewitt 2501 Winch Top Cover part# LWHWC25

Hewitt Chain Driven Winch

This chain driven, gear reduced,self-braking winch has an all aluminum casing that lets you raise and lower your boat with ease.

1501: 15 to 1 ratio part# LWHW15

2001: 20 to 1 ratio part# LWHW20

2501: 25 to 1 ratio part# LWHW25

Winch Gear Cover

Hand Winch

This is a non-braking winch with a one-way ratchet system.

B-1100 Gear Ratio 3.9:1 part# DWINCH

Crank handle part# D304016

For Hewitt 1501-2501 winch. part# LWHWGC

Double Pulley Conversion Kit

For 3000 lb lift. Converts lift to 3600 lb capacity. part# L1PCO

Crank Handle & Large Wheel

For less fatiguing manual winch operation. For DL, B1200, B1500, B2500, 1501, 2001, 2501 winches.

Crank handle part# LWWCH

40” Aluminum wheel part# LWWL Spinner knob with hardware part# LKNOB

Winch Arm Extensions

Length 18” (2-5/8” x 2-5/8”)

For Model 2600 HL - 4600 HL

3,000-4,200 part# NAMWEXT18

Solar Panels and Battery Stands

Various shapes and sizes of aluminum are available for sale. Contact your local dealer for details.

Solar Panel Battery Charger

These 10 watt & 20 watt solar panels offer outstanding performance even in cloudy conditions. This charger will efficiently keep your marine battery charged without overcharging. Rugged enough for year-round installation.

10 Watt Dimensions: 13-1/2” x 11” 20 Watt Dimensions: 24-1/2” x 11” 30 Watt Dimensions: 23-1/4” x 17-3/4”

10 Watt 12V Solar Panel Package (Includes Solar Panel, Stand, and Status Indicator with Charge Regulator) part# LSPP10

10 Watt 12V Solar Panel Only part# LSP10

20 Watt 12V Solar Panel Package (Includes Solar Panel, Stand, Status Indicator with Charge Regulator) part# LSPP20

20 Watt 12V Solar Panel Only part# LSP20

30 Watt 12V Solar Panel Package (Includes Solar Panel, Stand, Status Indicator with Charge Regulator) part# LSPP12-30

30 Watt 24 V Solar Panel Package (Includes Solar Panel, Stand, Status Indicator with Charge Regulator) part# LSPP30

40 Watt 24 V Solar Panel Package (Includes Solar Panel, Stand, Status Indicator with Charge Regulator) part# LSPP40

Solar Panel Stand only part# LSPS10

Status Indicator part# LSPSB

Battery Box Stand

These battery box stands keep your marine batteries off your dock and out of the way.

12V Stand

Clamps to square or round tube part# L1HYBBS

24V Stand

Bolts on, drilling required part# L1HYBBS24

Kill A Watt

Simply plug in Kill A Watt to evaluate the quailty of the electrical power provided from your utility company, by monitoring voltage, live frequency and power factor. Perfect for detect ing voltage drops and brownout con ditions before they damage delicate equipment.

part# LWMETER

Boat Lift Boss Electric Hoist

Indicates this product is shippable via UPS from your local dealer or visit us online at www.hewittrad.com.

Boat Lift Boss

The Lift Boss Boat Lift Direct Drive System takes the place of the standard winch wheel. It features convenient remote control operation and dock lighting for added safety. The unit is quick and easy to install and is available in AC and DC versions. For use on lifts up to 6000 lb lifting capacity. Brackets available for all lift brands. The Lift Boss double sealed motorshaft, sealed electrical box, and O-rings around the rivets allow for extra protection from the elements. This unit includes a two piece cover. Please ask your dealer for details.

AC Unit

Drive unit, AC non-remote control box with key, or AC remote control box complete with key and one wireless remote control key fobs.

DC Unit

Includes 12 or 24V DC drive unit, non-remote control box with key or DC remote control box complete with one wireless remote control key fob.

Optional Jumper Wire needed to run motor (24V) part# NAHYBC18

Motor RPM Current Draw Part #

AC 110V Unit w/Remote

DC 12V/24V Unit w/Remote

DC 12V/24V Unit w/Key Switch

56 7-16

at 12V

AMPS at 12V LWHDDS12

at 24V 20-40 AMPS at 24V

Optional Jumper Wire needed to run motor (24V) part# NAHYBC18

Buck Booster

Used when electrical wiring is inadequate or if faster lifting time is desired. AC Models ONLY!

Limit Switch

Mechanical spring driven limit switch prevents you from overlifting your boat on lift. AC/DC Models with remote ONLY!

Installation Kits

Beach King part# LWHDDK-L

Daka Lifts part# LWHDDK-L

Dock Rite part# LWHDDK-L

Dutton-Lainson B1200, 1500, 2500 part# LWHDDK-DL (Lorenz winch) part# LWHDDK-L

Floe inc (Open Face winch) part# LWHDDK-L Fulton part# LWHDDK-F

Harbormaster part# LWHDDK-HM Hewitt part# LWHDDK-H

Lakeside Lift (Lorenz winch) part# LWHDDK-L

Porta-Dock part# LWHDDK-PD

RGC part# LWHDDK-RGC

ShoreMaster part# LWHDDK-SM

Shorestation (Up to 4000) part# LWHDDK-SS4

Shorestation (Up to 6000) part# LWHDDK-SS6

Lift Boss Pendant

15’ Hand pendant for lift boss turn key. part# LWHDDPEN

Lift Boss LED Light

part# LWHDDK-LIGHT

part# LWHDDB 10’ Battery Extension part# LWHDDB10

Lift Boss part# LWHDDL

Shore Commander, Rail, Proteus part# LWHDDSS

Various shapes and sizes of aluminum are available for sale. Contact your local dealer for details.

DC Model

Integrated Hoist

Integrated Hoist

All-in-one winch and motor available in:

AC with remote

DC with remote

5,000lb

AC part# LWIWAC

DC part# LWIWDC

7,500lb for 5/16” Cable

AC part# LWIWAC516

DC part# LWIWDC516

7,500lb for 3/8” Cable

AC part# LWIWAC38

DC part# LWIWDC38

Anodized Aluminum Housing

• The clear anodized finish provides a great look while protecting it from corrosion.

Heavy-Duty Worm Drive Gear Head

• The Heavy-Duty Worm Drive Gear has been painstakingly engineered through years of development to survive and surpass the stress and torque experienced with the weight of today’s lifts. The trauma force that lifts face cause many of the competitors’ off-the-shelf parts to fail, but Boat Lift Boss Worm Drive Gear Head has the strength and holding power to not simply outlast, but to thrive in these extreme conditions.

Heavy-Duty Chain and Sprockets

• Heavy-duty hardened steel sprockets add life to the unit, while the heavy-duty chain is spun on a true roller bearing instead of a bronze bushing.

HDPE Cable Keeper

• When there is no load on the winch, cables have the potential to loosen and slip outside of the spool, which the consumer would not recognize until too late. Cables becoming caught in the chains and sprockets can cause expensive damages to the lift and leave it unusable. The HDPE Cable Keeper eliminates this possibility by keeping the cable fully contained in the spool where it belongs.

Stainless Steel Hardware

•All the hardware found throughout the unit, inside and out, is constructed of high-grade stainless steel and will never rust.

High-Sided Winch Drum

•High sides on the winch drum work in conjunction with the Cable Keeper so no cable can escape through the top while also allowing plenty of space for extra cable should it be needed.

High-Power 120V or 12/24V Motor

•Available in both AC and DC models, designed and perfected for the marine environment. AC models are designed for lifts with access to GFI-protected shore power, while DC models run either on 12V or 24V battery power. Powering DC models with 24V will nearly double the lift speed. Additional battery, solar power and wiring are required.

Weather-Resistant ABS Housing

•The fully-sealed injection-molded electronics housing offers the best protection for the electrical components while providing a clean factory-designed look, not just the bolted-on afterthought look other brands feature.

Heavy-Duty Roller Bearings

•All major load-bearing points utilize oversized bearings and are protected with a plastic cover and weatherproof O-ring. Competitors use bronze bushings that can fail rapidly and crush under a load.

Field Upgradeable

Quick-Detach Electronics

•The quick-detach electronic connectors allow a quick and easy electronics swap without ever needing to remove the entire unit from the lift. Eight simple screws and one quick-connect plug are all that fasten the electronics to the rest of the Boat Lift Boss, making it all possible to change the entire electrical system in less than two minutes. This feature is especially helpful when a customer wishes to add a wireless remote control to their existing Boat Lift Boss.

Roller Fairlead

•The Roller Fairlead guides the cable properly into the drum and is recessed close to the spool, preventing the cable from ever jumping outside of the drum.

Heavy-Duty Electric Hoists

Indicates this product is shippable via UPS from your local dealer or visit us online at www.hewittrad.com.

Heavy Duty Hoist Motors

Hewitt Heavy Duty Hoists are an alternative to the manual winch. They feature a heavy-duty worm drive powered by a 115V AC or 24V DC motor. High-strength, precision machined components allow these hoists to be rated for higher lifting capacities than competitive brands. Available in three models for capacities of 2000, 4000, 6500 and 8500 lbs. Cast gears, pulleys, motors and wire gauge are specifically sized to the capacity. Hoists include a protective cover, weatherproof wiring and a baked-on powder coated finish.

Heavy Duty Motor / E-Gear Remote

Is built with a manual up and down push button, or use the two wireless remote key fobs included. Heavy duty motor remote has an auto stop plug that allows you to add a mechanical limit switch to stop the motor at a specific boat lift height.

110 V part# LRMR

24 V part# LRMR24

See optional limit switch on pg. 72. Cable Drum Box Drum »

Canopy Accessories & Camper Stabilizers

Canopy Storage Net

Storage net creates storage under your canopy. Net protects gear from sun, rain, wind, and theft. Installs with quick release clips in minutes. No tools required. Makes boating much more enjoyable. Turn your canopy into a boathouse today.

Size Width Part #

Small 96” - 107” LDCS1096

Medium 108” - 120” LDCS1108

Large 121” - 138” LDCS1138

Bird Deterrent

Keep birds away and your canopy clean. Bracket attaches to a lift upright and then over the canopy frame. Allows removal of your canopy cover without having to remove the bird deterrent.

part# DBIRDC

Canopy LED Lighting

Wireless light kit turns your boat and boat lift canopy into an extended evening entertainment area, adding ample light to continue the festivities. Just a quick click on the remote (included) will turn the lights on or off.

part# LWHDDCLR

Canopy Mesh Skirt

42” mesh skirt that attaches to the canopy frame work.

Call for more information.

Canopy Bracing

Used to support canopies 29’ and up. Completely adjustable with the telescoping extension.

For 3’x3’ Rails part# LDCB

For 3’x6’ Rails part# LDCBJ

Canopy Repair Kit

Did you have an accident and puncture your canvas? No problem This canvas repair kit is easy to use for permanent repairs of small holes and tears in your canvas. This patch kit comes with a 4 oz can of adhesive with brush and one 1/4 square yard of fabric in your color choice.

Vinyl part# REPAIR-(color)

Defender part# REPAIRD-(color) SeaMark part# REPAIRS-(color)

Tension Cords

Tired of tying canvas to your canopy frame and cutting knots when you remove the canvas? Then tension cords are the answer! Quick and easy.

Set of 40 part# LDR

Camper Stabilizers

Lightweight, but heavy-duty stabilizers remove the side-to-side and front-to-back frame movement. No more annoying sway! Stabilize frame heights from 19-26 inches high. Any camper with an exposed frame works well with our camper stabilizers.

part#

TSTABLE

Complete with:

• Two stabilizing legs

• Two adjustable pins

• Chain

• Binder

1. Embroidered baseball cap, various colors.

2. Stocking cap, various colors.

3. Polo T-shirts, various colors – embroidered.

4. Polar fleece jacket, various colors.

5. Embroidered sweatshirt in two logo styles, various colors.

6. Micro fiber pullover, various colors.

7. Hooded sweatshirt with full front logo – screen printed.

8. T-shirts, various colors – screen printed.

9. Messenger Bag in black with screen printed logo.

10. Leather Portfolio – embossed logo.

11. Hewitt Beach Towel.

12. Grill Tool with printed logo.

13. Insulated Beverage Container – black with screen printed logo.

14. Can Coolers with screen printed logo.

15. Backpack – black with screen printed logo.

16. Soft-Sided Cooler – blue with screen printed logo.

17. Insulated Cup with Handle – white with printed logo.

18. Insulated Beverage Containers with printed logo.

We at HEWITT would like to thank you for your interest in our products. We are confident that you will find the service, quality, workmanship, and design of all HEWITT products to be the industry’s finest. For over 40 years, boat and watercraft owners have trusted the safety and longevity of their investments to Hewitt lifts, docks, and canopies.

LIMITED WARRANTY

During the periods stated below from the earlier of the date of purchase or the date the product was put into service, Hewitt Machine & Mfg., Inc. (hereinafter “HEWITT”) shall cover the costs of parts needed to repair or replace any of the following products defective in material, workmanship or factory preparation, subject to the limitations and expectations contained herein.

1. 15 year warranty on aluminum welds;

2. 5 year warranty on the following:

a. BoatPort galvanized steel and welds;

b. Vinyl and SeaMark canvases; and

c. Aluminum decking.

3. 3 year warranty on BoatPort polyethylene tanks.

4. 2 year warranty on all other products and accessories. (hereinafter the “Warranted Products”)

This Limited Warranty is subject to the following limitations and exceptions:

1. This Limited Warranty covers only Warranted Products manufactured by HEWITT. Non-HEWITT manufactured products are sold “ as is,” without warranty of any kind by HEWITT including any express warranty and implied warranty regarding MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, AND ALL SUCH WARRANTIES ARE DISCLAUMED. The sole warranty, if any, with respect to such non-HEWITT manufactured products is given by the manufacturer or producer thereof. Based upon HEWITT’s knowledge the following warranties are provided by other manufacturers: hydraulic pumps and hoses carry a manufacturer’s 2 year warranty. Hydraulic cylinders carry a manufacturer’s 1 year warranty. BoatPort controller carries a manufacturer’s 1 year warranty. However, HEWITT makes no representations or warranties concerning these nonHEWITT manufactured products, and the customer should inquire directly with such third party manufacturers regarding any warranties.

2. This Limited Warranty covers only Warranted Products purchased new by the original purchaser. This Limited Warranty shall not extend to anyone other than the original purchaser of the HEWITT product.

3. This Limited Warranty does not cover the labor costs to repair or replace the Warranted Products.

4. This Limited Warranty does not cover the costs to repair damage to the Warranted Products caused by corrosion, fading and minor deterioration resulting from exposure to the elements, including the sun, environmental factors or acts of God. “Environmental factors” include such things as airborne fallout, chemicals, tree sap, salt, ocean spray, water hazards. “Acts of God” include such things as fire or accident, rainstorms, hailstorms, windstorms, tornados, sandstorms, lightning, floods and earthquakes.

5. This Limited Warranty does not cover the costs to repair damage to the Warranted Products caused by abuse, misuse, neglect, poor/ improper maintenance, tampering with parts, improper or unauthorized adjustment or alteration.

6. This Limited Warranty does not cover the costs to repair damage to the paint and/or finishes, puncture damage, dents, or scratches of the Warranted Products.

7. This Limited Warranty does not cover the costs of normal/scheduled maintenance of the Warranted Products.

8. This Limited Warranty does not cover the costs to repair damage to the Warranted Products caused by improper installation.

9. This Limited Warranty does not cover the costs to repair damage to the Warranted Products caused by the failure to comply with specifications or instructions. Specifications and instructions are subject to change without notice.

10. HEWITT reserves the right to make changes in the Warranted Products at any time without incurring any obligation under this Limited Warranty to make the same or similar modifications on Warranted Products previously manufactured and/or sold.

11. In the event of a possible warranty claim, the Warranted Product shall be returned to HEWITT. If proven to be defective upon inspection, the defective Warranted Product shall be exchanged for new or comparable rebuilt products, as determined by HEWITT. and shipped back to the original owner/purchaser. All shipping costs are the responsibility of the customer. Warranty replacement shall not extend the original warranty period of the defective Warranted Product. HEWITT must be notified in writing within one month of the expiration of the applicable period of the Limited Warranty for an item to be evaluated for warranty.

12. The customer’s remedies with respect to Warranted Products shall be exclusively limited to the repair or replacement remedy as provided in this Limited Warranty and in no event shall HEWITT be liable for loss of profits, revenues, savings, inconvenience, associated costs, expense for equipment or service, use of capital, facilities, services, storage charges, damage to property, or any other special, incidental or consequential damages caused by the use or misuse of, or inability to use, the Warranted Product, regardless of the legal theory on which the claim is based, and even if HEWITT has been advised of such damages. In no event shall recovery of any kind against HEWITT be greater in amount than the purchase price of the Warranted Product sold by HEWITT and causing the alleged damage. Without limiting the foregoing, the purchaser assumes all risk and liability for loss, damage or injury to persons, animals or property arising out of use or misuse of, or inability to use, the Warranted Product. HEWITT is not liable for third party claims. In no event shall HEWITT be liable for incidental or consequential damages to the full extent such may be disclaimed by law.

13. This Limited Warranty is the only warranty between the parties. This Limited Warranty states the limits and association of risk between two parties. The customer acknowledges and understands this Limited Warranty and agrees to be bound by the terms contained herein. No other express or implied warranties or guaranties, except as indicated in this Limited Warranty, given by any person or entity with respect to HEWITT and its products shall bind HEWITT. This Limited Warranty supercedes all other warranties expressed or implied. NO IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE APPLY TO HEWITT AND ITS PRODUCTS AND ARE HEREBY DISCLAIMED.

Specifications are subject to change without notice.