Uniting ARCCAW members across Alberta
Fall 2014
METAL Contender
Bruce Steel is building a brand and mentoring a future workforce
Trade Winds of Change Apprenticeship program offers hands-on learning for aboriginals
Amazing Race
Local participants shine alongside Canada’s best in national competition
ar t y mas P Christ trations; regis utive exec esults nr electio
HEATED WORK JACKETS
4
3
HIGH MEDIUM LOW
D EWALT HEATED WORK JACKETS. DESIGNED FOR CONSTANT WEAR The jackets, when used with a DEWALT 20V MAX* or 12V MAX* battery, are capable of providing hours of core body warmth and continuous heat†. Each jacket offers a water- and wind-resistant outer shell, an LED controller with 3 temperature settings plus pre-heat mode, and at least 3 core body heating zones. The heating power is transferred from the battery to the jacket by a USB power source that is also capable of charging up to 2 electronic devices that are USB-compatible. Tailored Tough to DEFROST any Worksite.
* With respect to 20V MAX*, maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18. *With respect to 12V MAX*, maximum initial battery voltage (measured without a workload) is 12 volts. Nominal voltage is 10.8. † Actual run time varies depending on battery type and heat setting Copyright ©2013 D E WALT. The following are examples of trademarks for one or more D E WALT power tools and accessories: the yellow and black color scheme; the “D”-shaped air intake grill; the array of pyramids on the handgrip; the kit box configuration; and the array of lozenge-shaped humps on the surface of the tool.
INTRODUCING DEWALT’S LINE OF LIGHTWEIGHT CORDLESS TOOLS - XR. THE DEWALT XR LINE WAS DESIGNED TO COMBINE THE ADVANCED TECHNOLOGY OF A BRUSHLESS MOTOR SYSTEM AND THE POWER SUPPLIED BY THE HIGH CAPACITY XR LITHIUM ION BATTERIES TO PROVIDE EXTREME RUNTIME ON ANY JOBSITE. GET MORE DONE. GET DEWALT XR.
Copyright ©2014 DEWALT. The following are examples of trademarks for one or more DEWALT power tools and accessories: The yellow and black color scheme; the “D”-shaped air intake grill; the array of pyramids on the handgrip; the kit box configuration; and the array of lozenge-shaped humps on the surface of the tool. *With respect to the DEWALT 20V MAX*: Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18.
Executive Secretary Treasurer’s
REPORT
Pride and Performance Wins Work Martyn A. Piper
W
ow, where did this year go?
It’s fall already and there is plenty still going on as we head into the last part of this year. Fortunately, work continues to be plentiful; however, it never ceases to amaze me how a small minority of our members continue to act out on jobs in a way that soils all of our reputations. I have said repeatedly that behaviour, production and safety wins work. If you do only one thing as a union member, report bad behavior, unsafe acts and being disrespectful to fellow workers. There just is no substitute for pride and performance. In terms of recent activities there have been plenty. Bargaining for a new provincial construction collective agreement is under way. Talks are about to open on new agreements at Westman Steel and we have just been served with a notice to bargain at Ply Gem/Gienow. We expect that this will be particularly challenging, given the size of the two merged plants (675 people) and the need to figure out wage schedules that ensure equity and fairness as well as merging the two groups into one set of terms and conditions of employment. Even this early on in the process I want to thank those people at Ply Gem/Gienow who have volunteered their time to work on the various committees under the leadership of Paul Zarbatany and Matthew Macleod. We also have some serious litigation going on with both the Stampede Board and City of Calgary with respect to harnessing the construction work in which they are involved. The Labour Relations Board has confirmed that we have bargaining certificates that encompass all construction as well as maintenance work undertaken by these two employers. At ATCO, we are in the throes of attempting to get a memorandum of agreement ratified. Should
4
HARDHAT | FALL 2014
that not happen, the employer and the union will have to return to the bargaining table. As I am writing this piece, there is still no firm decision from the chairman or the Provincial Apprenticeship Board about the status of the application to make scaffolding a designated trade. As you should be aware, the union and our contractors are on record opposing both the occupation designation and voluntary trade designation. We are hopeful this issue will be put to bed and we can get back to focusing our efforts on producing world-class and safe scaffolders. Going forward, it will be up to those other parties who are seeking designation to make the same investment that the Carpenters Trust Fund has to bring their standards in line with ours, if that is truly their interest. More importantly, we need to ensure that nobody moves from one level to the next without time in the trade and requisite schooling. For the New Year we are working on plans to initiate training in the ISM/lather and flooring trades. We have started meeting with various contractors, predominantly non-union at this point, to gauge the level of support and how relationships might develop. We are fortunate to have ready-made curricula and teaching materials, courtesy of the International Training Center in Las Vegas. This would truly be an exciting development, but there is much up-front work to be done before we can move from planning to putting students in school. Before I close, I want to acknowledge the sudden passing of our friend and Brother John Tackaberry. John was the business manager of the Painters and Glassworkers Alberta Council and also the chairman of the Building Trades of Alberta. I first met John around 1977 in Calgary and he epitomized what a real trade unionist should be. John was not only a bright and knowledgeable person, he was also one of those people who always acknowledged and made you feel special. His likeable personality, humour and sincerity will be missed by all who knew him and I know many of our Brothers and Sisters crossed paths with John at one time or another. We extend to his wife Jacquie and all of his family our condolences. Our thoughts are with them as they go through this difficult time. Moving on, Christmas and the New Year are quickly approaching, so let me say thanks and best wishes to our members and families, staff and executive boards. Good luck and good health and let’s re-dedicate ourselves to the mission Peter J. McGuire set for us 140 years ago.
Contents Undeliverable mail should be directed to ARCCAW 200-15210 123 Ave Edmonton, AB T5V 0A3 Email: lhelmeczi@albertacarpenters.com Canadian Publications Mail Product Sales Agreement # 40063788
PUBLISHED FOR
Alberta Regional Council of Carpenters & Allied Workers 15210 – 123 Avenue Edmonton, Alberta T5V 0A3 Tel: (780) 474-8599 / Fax: (780) 474-8910 www.albertacarpenters.com
Fall 14
FEATURES
10 Going Local Bruce Steel Erectors is a friend to Alberta unions and a top employer of aboriginal and homegrown workers By Jacqueline Louie
PUBLISHED BY
Venture Publishing Inc. 10259 – 105 Street Edmonton, Alberta T5J 1E3 Toll-free: 1-866-227-4276 Phone: (780) 990-0839 Fax: (780) 425-4921 www.venturepublishing.ca PUBLISHER
Ruth Kelly
13 Pedal to the Metal On the jobsite with Westman Steel
14 Executive Decisions A look at the new ARCCAW executive
18 Brotherly Competition Alberta apprentices bring their skills to the National Apprenticeship Contest By Robbie Jeffrey
ARCCAW EDITOR
Martyn A. Piper
DIRECTOR OF CUSTOM CONTENT
Mifi Purvis
21 Trading Up Sixteen-week pre-apprenticeship program sets up students for success By Nadia Moharib
EDITOR
Shelley Williamson ART DIRECTOR
Charles Burke
ASSOCIATE ART DIRECTORS
DEPARTMENTS
PRODUCTION COORDINATOR
4
Note from the Executive Secretary Treasurer
Andrea deBoer, Colin Spence Betty Feniak Smith
13
By Martyn Piper
PRODUCTION TECHNICIANS
Brent Felzien, Brandon Hoover CONTRIBUTING WRITERS
Martin Dover, Robbie Jeffrey, Jacqueline Louie, Nadia Moharib, Erica Viegas CONTRIBUTING PHOTOGRAPHERS AND ILLUSTRATORS
Darryl Propp, Curtis Trent, Romy Young VICE-PRESIDENT, SALES
Anita McGillis
ALLYSON KURIAN
Director of Sales
7
Site Lines Meet Alexis at Local 1460; 1325 service awards; Chuckwagon sponsorship; Calaway Park Day; mass email registration and more
18
15 On the Level Brandi Thorne gives a first-hand account of life as a scaffolder
ADVERTISING REPRESENTATIVE
Kathy Kelley
24 Geared Up
SALES ASSISTANT
Julia Ehli
Contents © 2014 by ARCCAW Inc. No part of this publication should be reproduced without written permission.
25 KidZone 26 Meet the Instructor 27 Meet the Apprentice
Important Phone Numbers Edmonton 780-471-3200 Fort McMurray 780-743-1442 Calgary 403-283-0747 Carpenters Training Centre 780-455-6532 Carpenters Health and Welfare 780-477-9131 Carpenters Pension 780-477-9131 Industrial Workers 403-283-0747 Millwright Local 1460 780-430-1460 Local Union 1325 and 2103 Dispatch 1-888-944-0818
28 Training & Apprenticeship Report By Len Bryden
29 Local 1460 Millwrights Report By Bob Hugh
30 Parting Shot 31 Training & Events; In Memoriam
ON THE COVER: Bruce Steel Erectors PHOTO: Romy Young FALL 2014 | HARDHAT
5
Site Lines
News in Brief
A roundup of news and events from around the region
Annual Picnics Members of Locals 1325 and 2103 relaxed their muscles and exercised their appetites at independent picnics this past August. Members from 1325 were treated to tasty fare served by executive members at the Alberta Carpenters Training Centre in Edmonton, while 2103 members and their families hit Calaway for an afternoon of rides and refreshments.
FALL 2014 | HARDHAT
7
Stay Connected Please sign up to have your current email address on file with the Alberta Carpenters’ provincial dispatch office in Edmonton, to be included in the Regional Council and training centres’ mass email service. We often send out important notices and bulletins to members, such as news about open spots in courses. Call 780-471-3200 or (toll-free) 800-272-7905 to reach our dispatch department, to have your email registered. You can also email your contact details to sharon@albertacarpenters.com.
Introducing Alexis My name is Alexis Rabin. Since my warm welcome in July as receptionist for the Local 1460 Millwrights, it has been a steady learning curve. Fortunately since that time I have been allowed to demonstrate my considerable lifeand work-related skills. My work history and training includes
everything from office management and independent insurance adjuster, to my most recent diploma from NAIT as a combined laboratory and X-ray technician. My husband Mark and I, our 23-year-old daughter Megan and our 21-year-old son Dale, welcomed their sister Molly on August 6, 2012. Having decided a more stable work environment was in order, I was happy to join the Millwright, 1460 team. However, if you want to bring in your X-rays, I will grimace along with you while you recount your story.
Local 1460 Children’s
CHRISTMAS PARTY! Sunday, November 30, 2014 | 11am to 3pm Double Tree by Hilton (Formerly Mayfield Inn) 16615 109 Avenue, Edmonton All family members are welcome! Children 12 or younger will receive a gift. Come between 11 a.m. and 3 p.m. for face painting and a balloon artist! Luncheon between noon and 1 p.m., followed by a 50-minute magic show.
Pre-registration requires the following information: • Member’s name • Number of family members attending • Age and gender of children 12 and under To pre-register, email info@millwrights.1460.com or call 780-430-1460, ext 2164, or toll-free at 1-877-250-5079 no later than November 21, 2014
To ensure space and food for everyone, and appropriate gifts for children aged 12 and under, pre-registration is a must!
REGISTRATIONS NOT ACCEPTED AFTER NOVEMBER 21.
Local 1325 Awards Dinner and Dance
On February 21, 2015, Local 1325 will hold its Service Awards Banquet and Dance at the Chateau Lacombe Hotel in Edmonton. Invitations for those members celebrating 25 years and up, in multiples of five, will be sent out in November 2014. Additional tickets, at $50 each, will be available for sale at the Union Hall in Edmonton. The RSVP deadline for the event is February 6, 2015. We look forward to another fabulous event to present pins to celebrate our long term members!
On the Bandwagon
When it comes to the
health of your employees…
it’s important to have a plan.
Alberta Blue Cross delivers the group benefits that employees prefer, and the value your business needs.
The Building Trades of Alberta decided to pony up and put its sponsorship for the last two races of the season behind the Shane J. Cartier chuckwagon, seen here in action at the Canadian Chuckwagon Finals in Vegreville in August. The Building Trades of Alberta represents 75,000 skilled building trade workers in 22 affiliated unions.
Call us today for a confidential, no-obligation quote or talk to your plan advisor.
Edmonton 780-498-8500 Calgary 403-294-4004 Lethbridge 403-328-6081 Medicine Hat 403-529-5550 Grande Prairie 780-532-3507 Red Deer 403-347-7999 Toll free 1-866-513-2555
www.ab.bluecross.ca/group Prescription Drugs • Dental • Life and Disability Vision • Travel Coverage • Critical Illness Spending Accounts • Extended Health Employee and Family Assistance Program ABC 83188 2014/01
Alberta Blue Cross 2014 Hardhat 1/2 pg vertical/ full colour Trim Size: 3.625” x 9.875” RUN Spring Fall
INTEREST SPARKED: Roger Bruneau of Bruce Steel Erectors believes the future of tradespeople in Alberta depends on nurturing young people who are interested in becoming apprentices.
10
HARDHAT | FALL 2014
Going
Local
Bruce Steel Erectors is a friend to Alberta unions and a top employer of aboriginal and homegrown workers By JACQUELINE LOUIE | Photography by ROMY YOUNG
R
oger Bruneau, general manager of Bruce Steel
Erectors, says there is nothing that aboriginal people can’t do when they put their minds to it. And he encourages people who are hard workers – aboriginals and non-aboriginals alike – to set their sights high and go after their dreams. “We’re always looking for opportunities. We’re always looking to help our people develop their skills,” says Bruneau, who became the Edmonton-based company’s majority shareholder in 2008. Bruce Steel Erectors is a multi-trade contractor doing field work, rigging, erecting, welding, structural steel, piping, millwrighting and equipment operation, mainly in Alberta and Saskatchewan, serving the oil and gas industry and also doing industrial maintenance and selective commercial work. “Oil and gas in Alberta is the place to be – that’s where the money is,” Bruneau says. “Oil and gas is big, and it’s not going away. There is probably about $30 billion of work in the planning stages right now.” And because there is a shortage of tradespeople, “The opportunities are pretty much unlimited.” Working in the trades brings many benefits, Bruneau says. The wages are excellent: the average tradesperson, who makes approximately $40 an hour plus benefits, can easily earn $80,000 a year. Another bonus: “If you become a tradesperson, your schooling is paid for by the union. You come out as a journeyman with no debt.”
Yet another benefit, points out Bruneau, is the opportunity for ongoing education. To facilitate this, employers pay into an education fund for employees as part of the collective agreement with unions. At any given time, Bruce Steel Erectors has anywhere from nine to 60 workers, including ironworkers, pipefitters, millwrights, operating engineers, scaffolders, administrators, planners and labourers. Bruce Steel Erectors does everything from building gas plants to maintenance, repairs, modifications, shutdowns and turnarounds, hiring through a variety of trade union halls. “You need to assess your manpower,” says Bruneau, who will estimate a job and then make calls into a union hall, which has 48 to 72 hours to supply him with workers. When hiring, Bruce Steel Erectors focuses on aboriginal and Canadian workers. “I am a Canadian and will support Canadians,” says Bruneau, who doesn’t look for temporary foreign workers because he’s always been able to find staff locally. “People here are capable of doing the work, and the ones that aren’t, are capable of being trained. We need to invest in our own people.” One of the organizations that Bruce Steel turns to when hiring, is the Regina-based Aboriginal Skilled Workers Association (ASWA), which has a pool of workers certified in the trades. The company also supports Trade Winds to Success Training Society, an exclusive aboriginal pre-apprenticeship training program that addresses the low level of participation of aboriginal people in the skilled trades in Alberta. FALL 2014 | HARDHAT
11
an apprenticeship in a trade, which could open the door for them to eventually become small business owners or run a contracting company of their own. “Right now, we have a situation where we’re in an economic boom in Alberta,” says Hugh, who believes that in order to avoid a shortage of skilled workers, it’s essential to encourage young people to become involved in apprenticeships and the trades. “A lot of other industries have gone to temporary foreign workers, and I don’t think that is necessary. We need to keep the better paid jobs in Canada. I believe we can manage our own destiny by bringing in apprenticeships and growing from within, in Canada.” In terms of trades-related careers, two of the most underutilized groups of people in Canada are women and aboriginals, notes Hugh. “We need to reach out to them – we need more of them getting involved in the trades.” However, there are many challenges facing aboriginal people, and according to Bruneau, one of the biggest hurdles is racism. “It’s less than it was 30 years ago, but it still exists,” says Bruneau. “Young aboriginals face it all the time and they have to rise above that. Young aboriginal people have a lot of obstacles, but they can all be overcome.” Aboriginal people have been stereotyped as “good for nothing,” Bruneau says. “In my experience, the ones who want to go to work are extremely smart and they usually work very hard. They are every HOT MARKET: Blue Steel Erectors’ Roger Bruneau, who bit as successful as anybody else I’ve hired.” is Metis, says aboriginals are an underused workforce and For Bruneau, overcoming these stereotypes hits close to home: he’d like to see more of them in the trades. “As a Métis, I struggled to get where I am,” he says. “I did that by studying. I invested in myself, writing exams and showing up. I did my work, stayed out of the drama and moved forward.” A non-profit society, Trade Winds to Success offers a 16-week Born and raised in St. Pierre-Jolys, Manitoba, Bruneau holds three pre-apprenticeship program for aboriginal people, that prepares them journeyman tickets and a variety of other trades qualifications. He to enter an accredited apprenticeship program and graduate as a jourbegan working in the trades at the age of 15, and has experience in a neyman in their trade. Along the way, the program provides guidance, diversity of industries across Canada. “The best training I got was counselling, mentorship and oversight, “all the necessary support through the unions. The best job opportunities I got were through systems which are very often unique to aboriginal people,” says Trade the unions,” recalls Bruneau, Winds president and chairman Martyn Piper, who is also exec- “Young aboriginal people have a lot of obstacles, noting that good workers in the trades are recognized for their utive secretary-treasurer of the but they can all be overcome.” skills, quality and performance. Alberta Regional Council of - Roger Bruneau, Bruce Steel Erectors “That’s how you move ahead. Carpenters and Allied Workers. Now 50, Bruneau would like Successful completion of the to retire from Bruce Steel Erectors within the next six years. But he Trade Winds program gives participants “enough skill to go out in the has no plans to stop contributing. Together with industry, Bruneau field, market themselves and be productive individuals as a first-year would love an opportunity to come up with solutions to put more apprentice,” says Bob Hugh, senior business representative and direcaboriginal people to work. “I’d like to sit at a roundtable one day with tor of training with Alberta Millwrights Local 1460, which represents industry and point out places where we could do this,” he says. 1,600 millwrights in Alberta and is a training partner in the Trade If there is one message he wants to get out to aboriginal people, Winds pre-apprenticeship program. it’s that “Everybody is as good as everybody else – every single one The program “gets them through the prerequisite safety training of them. They are the masters of their destiny. If they want to own they’ll need to go into the job site,” Hugh says. It also provides participants with a good understanding of what’s required when working out a company like Bruce Steel, that’s up to them. There is only one in the field and goes over employers’ expectations of being work-ready, important thing in business, and that is to take care of the client, and punctual and committed to the completion of a project. “We hope that the client will take care of you. Make the client successful, be easy to deal with, make their life simple, and they will keep you employed. by taking the program with us, that they’ll flourish in the apprenticeDo the best you can and you’ll be recognized.” ship program and be productive individuals in our community.” He concludes: “The opportunities are there – you just have to go By completing the Trade Winds pre-apprenticeship program, after them. The sky is the limit for them.” Hugh says, participants have the opportunity to go on and complete 12
HARDHAT | FALL 2014
Pedal to the Metal Westman Steel is one of the largest manufacturers in Western Canada of premium steel products including cladding, fasteners, flashing, lining panels and roofing, and an employer of Local 2103 members. Hard Hat paid a visit to the Airdrie site to capture some of the crew hard at work in the plant.
Bob Sawatsky
Nam Cam
Derek Daigle and Tony Picard
Giovanni Bianchini, Austin Sinclair and Cori Olsen
Charles Skinner
Kevin Yeung and Ho Dinh Quan
FALL 2014 | HARDHAT
13
ARCCAW ELECTION Regional Council executive selected for the next four years By MARTIN DOVER
N
early 80 delegates came out to cast a
ballot at the Chateau Louis Hotel in Edmonton for the September 6 election of the Alberta Regional Council of Carpenters and Allied Workers (ARCCAW) executive. Martyn Piper, executive-secretary for ARCCAW, says the elections are an important part of the selection and running of the council. “It’s the central governance and oversight for the affairs of the United Brotherhood of Carpenters in Alberta. That really, at the end of the day, is the purpose for the Regional Council,” he explains. Elections are held every four years and delegates are elected by their local unions every three years. On the Regional
Council Executive Board front, Bob Hugh (Local 1460) was re-elected president, Mike Dunlop (Local 1325) was elected as the new vice-president, Martyn Piper (Local 1325) was re-elected as executive-secretary, while Norma Guzman (Local 2010), Gary Loroff (Local 2103), and Celine Stevenson (Local 1460) were all elected as trustees. Vince Parizeau was elected as warden, while Bruce Payne, Robert Provencher, Moe Rahime and Paul Zarbatamy all got the nod as ARCCAW executive committee members for another four years. Piper says he wants to thank the outgoing members of the executive, including Greg Budd (Local 1325), Shane Whitmore (Local 2103), Bob Arnestad (Local 2010), Gord Evers (Local 1460), and Bill Weireter (Local 2010). “Their contributions have been appreciated – they have served the council well over the last four years,” he says.
LOCAL 1325 CHILDREN’S CHRISTMAS PARTY 14 1, 20 4 2 1 r 0 e 2 e mb er 7, emb0 p.m. day, Nov c e D ay, 3:0 : Fri Sund0 a.m. – deadline 0 io n 11: tre strat Regi l Cendmonton a r u t E l gifts n Cu3 Avenue, iving .m. ! t. f e i a e c i g l e m r a a . p o 3 It e on ildren 2:30 0–1 welc eceive lunchred for ch out after 1423 bers nger will r d m n e i m ou requ nd e d e nt a mily 2 or y ainmistration is will be ha t r e All faren aged 1 t s s en re -reg esent Child cludeer yone, p on. No pr n a i on: n v he t io e f o r e ma t i Sant here c r a n r o u f l b n c i t g e Cele sure spa art in the in ill b 0 p.m. llow w o f To en r taking p 3 e : 2 y o s th nction until ish Merr and f quire ng f u r e i r d n n e t w e io to mas ers at d und me strat hrist ll! Regi mber’s na mily memb ren 12 an C e offic 05 to a • Me ber of fa er of child nton ) 272-79 m d u o n e N m g • d (800 he E e and • Ag call t toll-free ns after , r e t gis 200 or stratio i r e -r e To p 0) 471-3 cept reg 2014 c 8 , 7 a ( 1 t t 2 a ber ill no ed limit We wy, Novem s i e spac Frida ly – r a e ster Regi
on the level
Sisters in the Brotherhood Women are increasingly working their way into careers in the skilled trades By BRANDI THORNE
through my head a thousand times when people talk about me being a woman scaffolder. I never understood why people couldn’t see me as just a scaffolder. Growing up in Alberta, I have always worked hard with my family to chop wood, pack the kit for hunting, tend to the animals and harvest the garden. We took pride in our accomplishments together because we helped each other. There was always the air of friendly competition to see who could shuck the most peas or chop the most wood. When I began scaffolding, I found the teamwork and camaraderie was just like my family. Instantly, I loved being a part of that. This is why I am still in the trade today. I joined Local 1325 in August of 2005. That was a year of big changes in my life and among the biggest change was my career path. I took an opportunity at Dow Chemical just outside of Fort Saskatchewan. My daughter was eight years old, and I was looking for a stable income with reliable hours. I remember being the only female scaffolder with that contractor. I completed my apprenticeship in December of 2007 (I had to wait for my anniversary date), and by then I had worked with a handful of women. Some would stay and some would go. I remember the first female journeyman scaffolder/carpenter I met. I was impressed with the way she workforce that is more inclusive and diverse. This is exciting carried herself as confident and professional. I decided that and I am proud to have been chosen to represent all Canadian was the benchmark I would measure myself against. UBC members. Two months after joining, I felt a need to go to a union meeting. Now, when I ask myself what the big deal is, I understand a I wanted to find out more about it. The first time entering the few things differently. First, it is a big deal to be a skilled tradesbuilding on Princess Elizabeth Avenue was person. This career path for “When I began scaffolding, I found me has provided for my family scary. But soon other members started the teamwork and camaraderie was while giving me a rewarding and to help me understand what was going on and made me feel a part of it. I became a just like my family. Instantly, I loved fulfilling experience. Second, delegate in 2008 and the conductor for the it is a big deal to be a successful being a part of that.” local’s executive board in 2009. woman in the trades. It hasn’t In 2010, I was appointed the chair of the Alberta Regional always been easy to be me in a place where I’m different, but Council Sisters in the Brotherhood. A great team of women hosted I have persevered and we are all better for it. Lastly, and most the first women’s conference in Canada in October of 2011. Today, importantly, it is a big deal to be a union member. We are like I am involved in Journeyman, a Canadian Building Trades Unions my family. We can enjoy a sense of friendly competition. We can initiative to promote, support and mentor women in the skilled help each other out. We can take pride in our accomplishments trades. All 14 affiliated unions are working together to build a together. That is a big deal. FALL 2014 | HARDHAT
PHOTO: DARRYL PROPP
S
o what’s the big deal?” That question has run
15
WHEN MAXIMIZING PERFORMANCE IS A MUST.... Turn to the new 25’ Stanley® FatMax® tape featuring Auto-Lock which provides instant blade lock. Need quick measurements? Just disengage the lock for manual mode and it becomes a standard tape. Combined versatility and professional quality features such as 11’ blade stand out*, BladeArmor® coating and a customizable hook system makes this tape ideal for professional users.
stanleytools.com
*based on maximum performance
THE 14OZ. FATMAX速 HIGH VELOCITY HAMMER The NEW FatMax速 High Velocity Hammer swings like a 14oz. but strikes like a 28oz. so you can hit harder, longer and more accurately. stanleytools.com
Brotherly Competition
By ROBBIE JEFFREY
Alberta apprentices bring their skills to the National Apprenticeship Contest in Toronto
I
n August, journeyman carpenter Chad Gerrits returned
to Toronto from Alberta to see his family. Distinguishing this trip from a regular visit, he was there to compete in the 22nd- annual National Apprenticeship Contest, hosted by the United Brotherhood of Carpenters (UBC) at the picturesque downtown Roundhouse Park. Gerrits’s whole family is involved in carpentry, making the event even more significant than a standard family reunion. If he just wanted to see his family, it would have been simpler for Gerrits to buy a plane ticket. Getting to the contest was no small feat – after impressing the carpenters’ hall with his high grades, they asked Gerrits to compete in a provincial preliminary contest with five other like-minded contestants. He did so and won, landing him a seat to the national contest as Alberta’s only contending carpenter, where he would compete with participants from every province in Canada in a rigorous three-day skills showcase, August 21-23. Evan Polok was also picked for his academic achievements. The 21-year-old millwright apprentice from local 1460, who will begin his fourth year at NAIT in November, went through the preliminaries and emerged as Alberta’s dignitary in his trade. He approached the contest with a cool head: “You just treat it like work,” he says. “You’re a skilled worker that should run into this stuff on a daily basis.” But the apprentices representing Alberta must have been nervous – only journeymen and fourth-year students can compete, and you only get one shot at the trophy, which the winner brings back to their hall for a year.
Under a tent in Toronto’s Roundhouse Park, Polok had to construct a mock drive station, with an electric motor going into a gear box, while Gerrits was required to build a two- or three-person garden bench with a roof. Bryden says the event isn’t about winning – it’s more for fostering a sense of brotherhood and raising everyone’s skill levels. Regardless, Alberta made its presence felt: Polok scored a commanding second place, saying, “It’s nice to get on the podium for Alberta and bring something back.” And in a tight race that came down to half-percents and tiny details, Gerrits took third place. “I talked to one judge who said he wouldn’t want to mark that again, and that it could have gone either way,” he says. “But I’m very proud of how I finished.” His favourite part was competing in front of 25 friends and family members. “I was very proud to place. It meant a lot to have my whole family there watching me,” he says.
Every year, a different Canadian city hosts the event. Edmonton hosted in 2002 and also in 2012, the event’s 20th anniversary. Its aim is to promote the brotherhood and the trades represented therein, as Len Bryden, director of training and apprenticeship with the Alberta Carpenters Training Centre, explains. “It’s all about taking the best and the brightest of each province and putting them in a national competition and showcasing it as much to the public as we can to promote the trades,” he says. Beginning on the Thursday, the contestants had a meet-and-greet reception before starting theory testing the next day. Saturday, however, was the day of action in the contest. Apprentices from four categories – carpentry, millwrighting, interior systems mechanics and drywall – and a new addition, floor covering, gathered at Roundhouse Park for the eight-hour practical exam. They had to complete a project start to finish, and the winners, determined by a host of examination factors, were announced at an evening banquet at the Hyatt Regency Hotel, featuring guest speakers including CFL star Michael “Pinball” Clemons. The National Apprenticeship Contest is only one part of the UBC’s mandate to promote apprenticeships. Each regional council in Canada has training trust funds paid into by employers, and in most cases, the funds pay for the apprentices’ tuition, for example. But the contest, especially the practical portion, is where the rubber meets the road. “We want the general public to know that UBC members are some of the best workers an employer could want,” Bryden says. At both the provincial and national competitions, some employers will offer apprentices a job on the spot. 18
HARDHAT | FALL 2014
Chad Gerrits, who placed third in the carpentry competition
Evan Polok, second place finisher in the millwright competition
FALL 2014 | HARDHAT
19
20
HARDHAT | FALL 2014
Desiree Church is a fourth-year millwright and member of Local 1460 Alberta Millwrights.
Trading UP Sixteen-week pre-apprenticeship program sets up students for success in the workforce By NADIA MOHARIB | Photo by CURTIS TRENT
O
ne might say Jonas Soosay is a well-balanced
fellow. And they would be right. Poised to get his scaffolding journeyman status early next year, the Albertan has climbed the workplace ladder, for sure. “Before, I was just a line cook,” he says. “It was, ‘I gotta look at a career.’ This is not what I planned in life. I thought, ‘Where am I going to be in five years?’ ” Answering that question became easier when Soosay signed up at Trade Winds to Success, after seeing the trades training program
advertised on public transit. Now, with Trade Winds approaching its first decade next fall, Soosay is one of many success stories. Since 2006, 781 students have completed the program, with 693 of them finding employment, 460 of which were union positions. Long wanting to be a carpenter, Soosay thought the program might be a way to make it happen and he gave it a go. To his surprise and gratitude, Trade Winds accepted him into the program. “I felt like it was a job interview for, like, a really huge company,” he recalls. “I felt really intimidated, but they gave me a shot.” FALL 2014 | HARDHAT
21
The first six weeks of the pre-apprenticeship program focus on Soon after signing up for the 16-week program – which offers aborigtrades’ orientation, allowing students to make an informed career inals tools of the trade and prepares them for entering the workforce – Soosay’s plan took a detour. Unable to find a union carpenter to work with, choice, followed by academic upgrading to ensure they pass the Alberta Industry Trade Exam. This is rounded out by lectures on he opted to pursue postings for scaffolders, instead. At the time, he didn’t even know what a scaffolder was. “It’s building topics ranging from camp life to tools of the trade. Equipped with their personal protective equipment, students then go into a union an elevated work platform for all trades,” he explains. “Be it welders, shop – which Trade Winds pays for – to be trained as everything from pipefitters, ironworkers, carpenters ... I’m building structures and helping out other Brothers and Sisters on the site and making sure they boilermakers to carpenters, electricians, ironworkers, steam/pipefitters, plumbers, millwrights, insulators, welders and scaffolders. are safe.” “You have everything you need to start your career as an apprenNow, Soosay, who grew up in Maskwacis, works north of Fort tice. Once they get out working, McMurray with Albian Sands, earning about $35 an hour, pretty much doubling “If I didn’t have Trade Winds, I don’t they are confident and happy with life,” Munroe says. “We have trained his cooking salary. His 10-year-old son know where I’d be. It helped me fathers and sons and moms and sons, certainty reaps the rewards of his father being more financially fit, which Soosay prepare to get my foot in the door.” had three cousins come through the program and had two brothers in one says is a double-edged sword. “I can get – Jonas Soosay, scaffolding apprentice group. The successful clients are our things for my son I couldn’t get when I best advertising.” was growing up,” Soosay says. “It’s good Initially a pilot project, Trade Winds to Success now works with an and it’s bad – because we spoil him.” But the program’s benefits are not lost on him. “If I didn’t have Trade annual budget of about $3 million and is funded by the federal and Winds, I don’t know where I’d be,” says Soosay. “It helped me prepare to provincial governments, as well as the Oteenow Employment and get my foot in the door. If not, I would be doing temporary jobs, which is Training Society, Rupertsland Institute, Métis Centre of Excellence, Community Futures Treaty Seven, ConocoPhillips, Enbridge, Shell no good; there is no future in that.” Canada and Total E&P Canada. Trade Winds’ executive director, Deborah Munroe, knows what it is like to feel stuck doing dead-end jobs. “I’ve been there. I was a single The cost of about $8,850 per student is covered. “It’s a win-win for mother of four (all under age 10) and trying to put myself through Alberta and the industry,” Munroe says. “For years, the industry is school,” she says. “I wanted a better life for my children.” saying they are coming up on a shortage of skilled workers – aboriginal And in her current post she takes great satisfaction in seeing others people are the fastest growing population in Canada.” put themselves on a promising path. “I wanted to be involved in the Desiree Church, now a fourth-year millwright and member of front line helping people,” Munroe says. “I believe in what the program Local 1460 Alberta Millwrights, says she wouldn’t have made it withdoes. It’s an opportunity for aboriginal people.” out the program. The 32-year-old from Manitoba, who has her child 22
HARDHAT | FALL 2014
PHOTO: JORDAN WILKINS
TOOLS OF THE TRADE: Since 2006, 781 Trade Winds students have completed the program.
with 479 having been assessed and 347 of those starting the program. and youth-care diploma and worked with at-risk children, came out to Don Finley, Edmonton’s project manager at Trade Winds, says Alberta to toil in camp kitchens after being unable to find work in her one reason the program works is because it considers the individual field. But she soon realized there was a more promising career challenges of students, which can include everything from housing to world waiting. transportation to putting food on the table. “When I was cooking I would talk to people working at the plant and “If you have lived in a very small community in northern realized they were making a lot more money than me, putting in the Alberta and all of a sudden you are in same time,” Church says. “I realized “For years, the industry is saying they Edmonton and you have only Grade I was on the wrong side of the food counter.” are coming up on a shortage of skilled 9 or 10 and now you want to be an apprentice, where do you start?” he For Church there was no looking workers – aboriginal people are the asks. “We take them from Day 1. We back, she says. “It helped me to be fastest growing population in Canada.” take the time to deal with people and independent – I can take care of – Deborah Munroe , Trade Winds’ executive director their problems.” myself,” she says of her millwright He says the program pays particcareer. “I’ve done pretty well. I had ular attention to the challenges of aboriginal workers. “We found some student loans, some car loans and I’m all caught up now and paid aboriginal people get into the trades, but 10 years later they are still a off my new car. I want to buy a home eventually.” first-year welder,” he says, adding the program helps students focus Not discounting her own hard work, she says the Trade Winds on short- and long-term goals. “Sometimes you just need help,” says program was a pivotal partner. “I would have never succeeded Finley, clearly passionate about doing his part toward students’ without it,” she says. “It got me familiar with the tools, the tricks of success. the trade – you know what to expect when you get there; you are not “When you see them get past it – they come in with their new thrown in there and (told) ‘Good luck.’ The day I was supposed to be truck or new girlfriend or they are getting married – it’s a wonderful finished I got a job.” feeling inside.” The bulk of Trades Winds students sign up for carpentry, followed Munroe also counts herself among the Trade Winds success by pipefitters, plumbers and then boilermakers – at least a quarter, like stories. “I went from $5 an hour to an executive director in 10 years,” Church, are women. “When I started, there were two or three women; she says. “I was lucky enough the board believed in me to run the now I get a class of 20 and there will be five,” Munroe says. program and the rest is awesome. Since April 2012, there have been 1,043 applicants to the program,
LOCAL 2103 CHILDREN’S CHRISTMAS PARTY 014 2 , r 30 e b ovemto 3pm otel N , y a ry H n Sund Noo ve Royal E, Calga 3 ti reet N u c 210 ld? e l a Ex 3 St Loc ears o 2 f s o 8 r y oodie 2 e g 2 d b 8 n e 1 2 fts a m befor om mem p to r re gi e
.f th he u a dren u rty w register 4:30 p.m u will be o a y P s o o l d tma all t . an ay, y Are as chi Chris o do is c 8:00 a.m . That w e. a o t t h d tre ren ve en invite ll you ha 1, betwe our child hristmas 2014. who e r a y A , C 2 . 4 2 es e of
m s th .5 on r1 ittle ted to the 0747 ext and age ft under ovembe l r u u yo gi ,N 3es If so, be distrib (403) 28 the nam ll have a er Friday e i t t l f s l at th re! wi er 14 a lling u child w tions a e b e o ch tra mb y, te ave t ee you th h n Nove to Frida in that ea ept regis e ildr c ift. S day certa ill not ac he ch e their g t Mon t a eiv e th We w e not rty to rec s a e l P Pa tmas Chris
Geared Up
By MARTIN DOVER
Work smarter, not harder HOODIES WITH HEAT Cold work sites are about to get a few degrees warmer, with a new line of heated gear from DeWalt launched in September. Latest additions to the 20V MAX/12V MAX line include a khaki 3-in-1 heated jacket with a hood, women’s heated jacket with removable hood and two heated hoodie styles. “Through our research, we learned that professionals were looking for more cold-weather jacket styles to wear on and off the job site,” says Mark Emmerson, lead category manager, DeWalt Canada. With the expansion of our current heated gear line, we are able to accommodate professionals and have also added women’s jackets for use on the job site as well as during outdoor activities.” The 3-in-1 khaki jackets and hooded sweatshirts are equipped with three core heating zones on the left and right chest as well as mid-back, while the women’s jacket includes these three heating zones, plus a fourth on the collar. Improvements in this line of outdoor wear, which retails for between $129 and $289 each, were based on customer feedback and include a stronger metal zipper, reinforced stitching on cuffs, built-in wind guard and metal snaps instead of Velcro to attach the hood. An adaptor extension allows wearers to keep the battery in the front or rear pocket. All kits come with a DCB107 20V MAX charger, USB power source and a lithium battery. Sizes available include small through extra-large. For more information, visit dewalt.com or follow DeWalt on Twitter or Facebook.
with most cellphones, and carries a broadcast range of up to 100 feet. Available wherever DeWalt products are sold, the DCR002 retails for $49.99. For more information, visit dewalt.com.
DITCH THE DRILL TUNE IN WITH BLUETOOTH Tuning into music on the job just came into radio range with the advent of DeWalt’s new DCR002 Bluetooth Radio Adaptor. Compatible with most major brands of job site radios, the device gives users the ability to transform any radio with an auxiliary input into a Bluetooth-compatible radio. Workers can wirelessly stream music from their own mobile phones or other Bluetooth-compatible devices, while keeping their phones or devices safely on their person and accessible at all times. The DCR002 Bluetooth Radio adaptor comes complete with a mounting clip and two mounting strip options: Velcro and industrial adhesive, depending on the level of permanence desired for mounting the device. The device also comes with a USB charging port compatible 24
HARDHAT | FALL 2014
Having to keep a toolbox full of manual screwdrivers or a larger, high-powered drill is a thing of the past, thanks to Porter-Cable’s new cordless 8V MAX Impact Screwdriver. Excellent for smaller fastening jobs, the 6.48-inch, 1.42-pound tool is light and easy to manoeuvre, while delivering high-impact fastening. Equipped with a quick-load chuck and a built-in LED to shed some light on the work area, the lithium battery-powered screwdriver is all you will need. Meanwhile, magnetic tip holders help keep bits from getting lost. Available at Lowe’s stores across Canada, the 8V Max Impact Screwdriver retails for $49.99. For more information, visit portercable.com.
Kid Zone
Snow Maze
START
Plow your way through the city sctreets!
FINISH
Q: What construction vehicle do farm animals like? (Answer below) Matching Game
Match the heavy equipment to the description Draw a line from the number to the correct letter
Backhoe loader
1
A
Levels the ground before a road is paved
Bulldozer
2
B
Lifts heavy materials to the tops of tall buildings
Compactor
3
C
Used to lift and transport materials, especially in warehouses
Concrete mixer
4
D
Has a boom that extends forward and up from the vehicle, with end attachments
Crane
5
E
A crawler that pushes rubble
Dump truck
6
F
Rolls and mixes concrete
Excavator
7
G
Used to demolish buildings
Forklift
8
H
Hardens the ground as it presses soil, stones and asphalt.
Grader
9
I
Used for transporting loose material
Telescopic handler 10
J
Digs from the back and shovels from the front
Wrecking ball 11
K
Has many uses but is primarily used for digging Answer Key: 1-J, 2-E, 3-H, 4-F, 5-B, 6-I, 7-K, 8-C, 9-A, 10-D, 11-G FALL 2014 | HARDHAT
25
A: bulldozer
Meet the Instructor
By ERICA VIEGAS
Decades of Service
J
im Archer’s millwrighting career has spanned
50 years. Having grown up a on farm outside Nottingham, England, he was always mechanically minded and jumped at the chance to apprentice in the coal mines once he graduated from high school. But he had often heard of a growing economy and more opportunity for the trade in Canada. In 1969, he took a leap of faith, moving to Edmonton to work in the construction industry and joining the millwright union a few years later. “I enjoyed the variety of work in Canada, but in the 1980s there was a huge downturn in every trade industry here,” says Archer. “I knew I could either sit around waiting for things to turn around, or become a bit more versatile.” Archer saw an advertisement for a millwright instructor at NAIT, and with his qualifications from the United Kingdom – which included some engineering courses – he filled the role well. When his family moved to Calgary, he was able to take on a teaching position at SAIT Polytechnic.
working on turbines for General Electric. These days, while Archer occasionally takes on site-supervisor roles, his main focus is teaching. He has helped to create courses in rigging, machinery alignment, compressors and turbines. His active lifestyle is part of what still keeps him going. “I stayed in Alberta because I love the mountains. I do a lot of mountain climbing and cycling and I think that’s given me the energy to keep working in other areas too.” His eight grandchildren also help to keep him active. Asked when he might stop teaching, Archer says with a smile: “I’ll keep doing it until I stop enjoying it.”
“By teaching with the local, I have been able to help create courses that cater to the specific needs of members.”
PHOTO: CURTIS TRENT
For Archer, teaching students about fieldwork comes naturally. “Over my career I have worked on a huge variety of equipment in pulp mills, the oil patch, fiberglass plants and in the power generator business,” he says. “If taught properly, students can have the skills on work on any machine in the country, and that means that work can be different every day, throughout your career.” When the Local 1460 Millwright union in Edmonton was looking for instructors, Archer, already a member, was eager. “A trade school has a definite curriculum you have to cover,” says Archer. “By teaching with the local, I have been able to help create courses that cater to the specific needs of members.” The upgrade classes offered by the union are generally taught to millwrights who already have their journeyman ticket, so they are learning because they want to, not because they have to. With his vast experience, Archer finds that he is easily able to relate to student stories and questions about different sites and industries. One particular job that sticks out for him as a personal career highlight is a six-month contract in Puerto Rico,
JIM ARCHER 26
HARDHAT | FALL 2014
Meet the Apprentice
By MARTIN DOVER
Lifelong Learner This carpentry apprentice traded in his massage therapy practice for a tool belt
D
onald Frey may have gotten his start on his
carpentry career slightly later in life, but it’s in many ways a trade he came by honestly. “I have two fathers, really, and both of my fathers work in the construction field,” says the 44-year-old second-year carpentry apprentice, noting both his biological dad and the man who raised him knew their way around a tool box. “I have always been more of a hands-on guy for learning, rather than through a book.” A father himself of an almost-five-year-old daughter, this Chicago native came to Canada for love. When his marriage didn’t work out, Frey says having a trade to fall back on was a huge help through that emotionally trying time in his life.
After writing his provincial exam, Frey hopes to return to his construction job full-time on an Edmonton job site this fall, where, like at the ACTC, he enjoys the satisfaction of seeing his work come to fruition. “We are building a shed right now. I have built a stool; I have built a tool box. I like being able to see what I have done and be amazed that I can actually build something; it’s just nice being able to do that.”
“I like being able to see what I have done and be amazed that I can actually build something.”
PHOTO: DARRYL PROPP
When he is not stacking up his hands-on learning through courses at the Alberta Carpenters Training Centre in Edmonton, Frey works with Delmar Construction on commercial and residential projects, where he has been employed since emigrating from the U.S. a half-decade ago. “It’s basically a free education, and I told myself I won’t pass up a free education; it’s also the only way that guarantees me a raise,” explains Frey. Frey likes the camaraderie that comes with working in the trades. “The relationship building with other trades is the best part,” says the Local 1325 member, who also happens to be a ticketed massage therapist. While he says the latter certification does lead to constant ribbing by his fellow Brothers and Sisters, he takes it in stride and it’s a path he still pursues part time. “You can’t get [massage] clientele overnight, but you can get 40 hours working in construction,” he explains. “I am recognized up here, so I do some massage therapy on the side.” Frey first heard about the ACTC through a colleague. “He said ‘Go to the carpenters’ union,’ so I joined for backup in case I got let go from work. Then I found out I could take courses for $10, and if I passed, that would guarantee me a $3- to $6-an-hour raise every time I went to school. That’s like going to school for free.”
DONALD FREY FALL 2014 | HARDHAT
27
REPORT
Training and Apprenticeship
Local apprentices shine in the national spotlight
F
all is upon us, and what a great, busy summer we had – full of
employment, jobs on the dispatch and packed training centres! Toronto hosted the National Apprenticeship Contest (NAC) at the end of August, and our carpenter contestant, 1325 member Chad Gerrits, took home third place overall in Canada. Congratulations to Chad on a great job! Our millwright brother, Evan Polok, also took home second place for Alberta, so congratulations to you both (for more information, see the story and photos on page 18). It’s always an impressive event. The NAC enjoyed its 22nd year and, with the contest held directly under the CN Tower and beside the Rogers Centre, thousands of people got to see our best new journeymen and journeywomen showcase their skills. This year’s contest consisted of carpenters, millwrights, drywallers/ISM and a new official category, floorlayers – many of our jurisdictions in Canada and the U.S. have begun training programs through our International Training Center in Las Vegas. At the training centres here in Alberta and across Canada we are looking at ways to incorporate some of this type of training, as well as others, into our course schedules in the future. As you may recall, we held the NAC here in Alberta in 2012, and I am pleased to say we have been asked to host again in 2016 in Edmonton. I will be looking for volunteers. We now have an additional training centre in Edmonton, the Alberta Carpenters Training Centre’s Centre West Campus. We welcomed our first level-one scaffold class into the new facility on September 15. There is still some work to be done over the next few months, and our students will be lending a hand as required in setting up. We have 3,000 square-feet of classroom and administrative/student space and approximately 12,000 square-feet of open shop space. As a result, we were able to increase the number of scaffold classes we offer, and have plans for other types of training, such as door hardware installation, concrete forms to help our members and contractors get the job done better. Keep checking www.abcarptc.ab.ca to see what training is available in any one of our four Alberta centres. On that note, please be aware that we have run many scaffold classes over the past few months with empty seats. If you are looking for scaffolding training, it’s always a good idea to keep in touch with the training centre’s registration department to see if there are any openings or cancellations. And as no-shows are still a problem, we are looking at increasing the no-show fees significantly to try to stem this unacceptable issue that affects other members who are ready, willing and able to take their required training. We now have Period 1 and 2, eight-week Alberta Apprenticeship carpentry training programs available in Edmonton to members and to the general public. We are also having issues filling those classes to capacity. We need more apprentices in carpentry to fill the growing number of retiring members. Call me and I will tell you the advantages of having an interprovincial Red Seal in carpentry
28
HARDHAT | FALL 2014
Len J. Bryden, Director of Training and Apprenticeship Alberta Carpenters Training Centre lbryden@abcarptc.ab.ca in Canada and this international carpenters union. Our contractors need future skilled carpentry leaders in the field, and you will be in high demand. Our training fund has always paid for members’ tuition and other costs. What’s stopping you? After such a busy last few years and no slowdowns in sight, I want to say thanks to our entire ACTC administrative staff, as they are our front-line responders to your questions and needs. A special thanks to my office manager and assistant administrator Kim Belbin, for the great work she does for the whole organization. I would also like to thank our committed team of 11 full-time instructors in four training centres, and a very busy support staff technician who put their all into teaching our members and apprentices something new every single day. There are so many benefits we have as members of this organization to be grateful for. Let’s not forget that as we keep pushing forward into what we all hope is a mild winter. But this is Alberta, after all.
REPORT
Local 1460 Millwrights
Millwright Apprentices: Skilled, Respected and In Demand
A
s set out under the Apprenticeship and Industry Training Act,
millwrighting is a designated trade with a Registered Apprenticeship Program (RAP). One of the primary benefits of apprenticeship is that it allows large numbers of workers to enter into a trade that they may not otherwise have access to. People without the financial resources to fund post-secondary education can develop skills that increase their earning potential. Participating in a Registered Apprenticeship Program allows an apprentice to earn while they learn. There are approximately 248 member apprentices in Local 1460, with another 81 in probationary status. A probationary starting apprentice must work a minimum of 480 hours and complete two days of training at the Millwrights Training Centre prior to joining the local as a full member. Our local participates in two worthwhile programs – Trade Winds to Success and Helmets to Hardhats. Both of these programs are focused on apprenticeship opportunities within our trade. You can read more about the history of the Trade Winds program and its relationship with our Local starting on page 21. The key to success is employment opportunities for first-year apprentices. We are promoting the use of more apprentices with both our contractors and their clients. The Building Trades of Alberta recently held a conference titled, Workforce under Construction: Turning Research into Action. The outcomes from this conference will enhance the employment potential for all of our apprentices and will help our local to recruit, train and supply the needs of our contractors and their clients into the near future.
Bob Hugh, Senior Business Representative Local 1460 Millwrights
MILLWRIGHT LOCAL 1460 APPRENTICES AND MEMBERS 1st Year
2nd Year
3rd Year
4th Year
Probationary
81
61
48
58
81
TOTAL: 329
FALL 2014 | HARDHAT
29
Parting Shot
Imperial Oil Refinery
The former Esso (now Imperial Oil) refinery was built in 1976 in the Strathcona, constructed to replace older refineries in Edmonton, Regina, Winnipeg and Calgary. The structure was damaged by fire in 2007, leaving the refinery temporarily at reduced capacity. Today the refinery has a capacity of 187,000 barrels of crude a day and employs a staff of about 430 workers. The facility produces petroleum products including gasoline, aviation fuel, diesel, lubricating oils, as well as petroleum waxes, heavy fuel oil and asphalts, and is the only producer of lubricating base oil and waxes in Western Canada.
30
HARDHAT | FALL 2014
UPCOMING
Training + Events
In Memoriam
MEETINGS First Wednesday of each month: Local 1325 meeting Third Thursday of each month: Local 2103 meeting Fourth Tuesday of each month: Local 1460 meeting
Scaffolding Level One: Oct. 6-24, 2014
TRAINING
Forklift / Zoom Boom (Power Industrial Truck Operator): Nov. 17-18, 2014
Alberta Carpenters Training Centre The following is a sample of training courses that are open for registration at the time of publication of this edition of Hard Hat. For full listing or more information on training courses, visit abcarptc.ab.ca or phone the Edmonton office at 780-455-6532 or toll-free at 1-877-455-6532. All courses are at the Edmonton location unless otherwise indicated. OSSA Confined Space Entry and Monitor: Oct.31 Scaffolding Journeyman Upgrade: Nov. 3-Dec. 5, 2014
ARCCAW notes with sorrow the passing of the following members.
Scaffolding Level Three: Nov. 17- Dec. 12, 2014 Pre- Employment Carpentry Program (TWTS): Nov. 17- Jan. 23, 2015
Aerial Work Platform: Nov. 19-20, 2014 Calgary OSSA Fall Protection: Nov. 1, 2014 Pre-Employment Carpentry Program (TWTS): Nov. 3-9, 2014 MILLWRIGHTS TRAINING CENTRE Visit www.albertamillwrights.com for a current listing of training courses available.
LOCAL 1325 Robert Alger June 29, 2014 Age 85 Briean Antione September 13, 2014 Age 19 Sheldon A. Bury September 25, 2014 Age 45 Helder Rumor Ferreira September 17, 2014 Age 38 Larry B. Fowlie July 15, 2014 Age 56 Hector C. Hery September 1, 2014 Age 64 Said Kadri July 19, 2014 Age 51 Shayne B. Radloff June 20, 2014 Age 55 Christopher T. Wood August 13, 2014 Age 25 LOCAL 1460 David Hooper March 18, 2014, Age 65 Daniel St. Pierre July 26, 2014, Age 57 David Biollo Aug 15, 2014, Age 89 LOCAL 2103 Greg Wall July 20, 2014, Age 40
FALL 2014 | HARDHAT
31