Constrain Overflow of EVA Film When Laminating Glass • Overflow EVA film after heating is a common problem that the EVA laminated glass manufacturers have to face. • Here is some tips for constraining the overflow of EVA film.
Constrain Overflow of EVA Film When Laminating Glass • Use thermal tape to seal the edges of pre-laminated glass, which can hold back the overflow of melting EVA film.
Constrain Overflow of EVA Film When Laminating Glass
Constrain Overflow of EVA Film When Laminating Glass
Constrain Overflow of EVA Film When Laminating Glass • Remember to make some holes on the tape to make sure the air can be vacuumed out. • About the thermal tape, you can choose the: • 135℃ Green Thermal Ribbon Tape for EVA Laminated Glass Processing • 150℃ Brown Thermal Ribbon Tape for EVA Laminated Glass Processing
Constrain Overflow of EVA Film When Laminating Glass
Constrain Overflow of EVA Film When Laminating Glass • If the overflow is happened anyway, you can use the Thermal Cutter to remove the overflow EVA film very effectively.
Constrain Overflow of EVA Film When Laminating Glass
Constrain Overflow of EVA Film When Laminating Glass • All rights reserved by • CNC GLASS INTERLAYER TECH WWW.CNCGLASS.COM • CNC@CNCGLASS.COM BENEXT77@GMAIL.COM • 008615013829504 Skype: CNEXT365 Wechat: WECAN365 Line: CNCGLASS • EVA film for laminated glass, PVB film, PDLC smart galss film, Glass hardware,
Constrain Overflow of EVA Film When Laminating Glass
Constrain Overflow of EVA Film When Laminating Glass