Bathroomware
EXCITING B AT H R O O M WA R E
VOSS is an exciting brand in bathroomware with a vision to give our customers a quality product with design flare. New Zealand owned and operated, we are dedicated to providing the best products at affordable prices.
With 20 years experience in the industry with distribution centres in Auckland, Christchurch and Melbourne we are positioned to give outstanding value through our bulk buying power and combined technical expertise.
All our products carry a 5 year limited warranty and carry the very difficult to obtain WELS rating and Water Mark so you are assured they comply with New Zealand building codes.
You will find Voss products through out New Zealand and Australia so you are assured of the quality.
voss.co.nz
VOSS, the leader in exciting bathroomware.
CONTENTS 4 VANITIES 05 06 08 09 10 12 13
PICASSO SERIES LINEAR SERIES ALESSIA SERIES LAPO SERIES SMILE SERIES MILTON & SMILE SERIES SISCO SERIES
14 BASINS 15 16 17 18 19
SOLID SURFACE VESSEL BASINS CERAMIC BASINS 9E SERIES GLASS SERIES
20 MIRRORS & CABINETS 21 AUSTIN & SMILE SERIES 22 STORAGE & SIDE CABINETS 23 MIRRORS
24 SHOWERS 25 SHOWERS 28 SHOWERS BASES
30 BATHS 32 TOILETS 33 TOILETS – BACK TO WALL 34 INWALL TOILETS 36 TOILETS – ACCESSORIES
38 TECHNICAL DRAWINGS 54 INSTALLATION INSTRUCTIONS 60 VOSS TERMS & CONDITIONS
VANITIES
VANITIES 5
PICASSO750 TECHNICAL→ P. 40
• Vanity,
single drawer with internal hidden drawer quality internal and external soft close runners • 600x460mm • White two pack lacquer gloss finish • Match with single ceramic basin 9060E OR GB600
• Vanity,
• High
• High
PICASSO900 TECHNICAL→ P. 40
PICASSO1200S TECHNICAL→ P. 40
• Vanity,
single drawer with internal hidden drawer quality internal and external soft close runners • 900x460mm • White two pack lacquer gloss finish • Match with ceramic basin 9090E or GB900
• Vanity,
• High
• High
PICASSO1200D TECHNICAL→ P. 40
PICASSO1500D TECHNICAL→ P. 40
• Vanity,
• Wall
• High
• High
double drawer with internal hidden drawer quality internal and external soft close runners • 1200x460mm double basin • White two pack lacquer gloss finish • Match with double ceramic basin 9120EE
single drawer with internal hidden drawer quality internal and external soft close runners • 750x460mm • White two pack lacquer gloss finish • Match with single ceramic basin 9075E or GB750
double drawer with internal hidden drawer quality internal and external soft close runners • 1200x460mm Single basin • White two pack lacquer gloss finish • Match with single ceramic basin 9120E or GB1200
hung vanity, four soft close drawers quality soft close runners • 1500x460mm double basin • White two pack lacquer gloss finish • Match with ceramic basin 9150EE or GB1500
PICASSO SERIES
PICASSO600 TECHNICAL→ P. 40
6 VANITIES
LINEAR SERIES LINEAR 600
TECHNICAL→ P. 43
• Vanity,
single drawer quality soft close runners • 600x460mm • White wash oak finish • Match with ceramic basin 9060E or GB600 • High
LINEAR 750
TECHNICAL→ P. 43
single drawer quality soft close runners • 750x460mm • White wash oak finish • Match with ceramic basin 9075E or GB750
LINEAR 900
• Vanity,
• Vanity,
• High
• High
TECHNICAL→ P. 43
single drawer quality soft close runners • 900x460mm • White wash oak finish • Match with ceramic basin 9090E or GB900
VANITIES 7
LINEAR SERIES
LINEAR 1200D
TECHNICAL→ P. 43
• Vanity,
double drawers quality soft close runners • 1200x460mm double basin • White wash oak finish • Match with ceramic basin 9120EE • High
LINEAR 1200S
TECHNICAL→ P. 43
double drawers quality soft close runners • 1200x460mm • White wash oak finish • Match with ceramic basin 9120E or GB1200
LINEAR 1500
• Vanity,
• Vanity,
• High
• High
TECHNICAL→ P. 43
double drawers quality soft close runners • 1500x460mm double basin • White wash oak finish • Match with ceramic basin 9150EE or GB1500
8 VANITIES
ALESSIA SERIES ALESSIA-1500 TECHNICAL→ P. 42 • Vanity
with soft closing drawers
• 1500x460x480mm • White • Match
two pack lacquer gloss finish with lacquer timber handles with double ceramic basin 9150EE OR GB1500
ALESSIA-600 TECHNICAL→ P. 42
ALESSIA-750 TECHNICAL→ P. 42
• Vanity
• Vanity
with soft closing drawers
with soft closing drawers
• 600x460x480mm
• 750x460x480mm
• White
• White
• Match
two pack lacquer gloss finish with lacquer timber handles with single ceramic basin 9060E OR GB600
• Match
two pack lacquer gloss finish with lacquer timber handles with single ceramic basin 9075E, OR GB750
ALESSIA-900 TECHNICAL→ P. 42
ALESSIA-1200 TECHNICAL→ P. 42
• Vanity
• Vanity
with soft closing drawers
• 900x460x480mm • White • Match
two pack lacquer gloss finish with lacquer timber handles with single ceramic basin 9090E OR GB900
with soft closing drawers (Available in Double Alessia-1200D) • 1200x460x480mm • White two pack lacquer gloss finish with lacquer timber handles • Match with basin 9120E, 9120EE OR GB1200
VANITIES 9
LAPO SERIES
LAPO-900 TECHNICAL→ P. 42 • Vanity
with soft closing drawers
• 900x460x450mm • White • Match
two pack lacquer gloss finish with single ceramic basin 9090E OR GB900
LAPO-600 TECHNICAL→ P. 42
LAPO-750 TECHNICAL→ P. 42
• Vanity
• Vanity
with soft closing drawers
with soft closing drawers
• 600x460x450mm
• 750x460x450mm
• White
• White
• Match
two pack lacquer gloss finish with single ceramic basin 9060E OR GB600
• Match
two pack lacquer gloss finish with single ceramic basin 9075E OR GB750
LAPO-1200 TECHNICAL→ P. 42
LAPO-1500 TECHNICAL→ P. 42
• Vanity
• Vanity
with soft closing drawers
with soft closing drawers
• 1200x460x450mm
• 1500x460x450mm
• White
• White
• Match
two pack lacquer gloss finish with basin single ceramic 9120E OR GB1200
• Match
two pack lacquer gloss finish with double basin ceramic 9150EE OR GB1500
10 VANITIES
SMILE WALL HUNG SERIES
Smile series available in rosewood
SMILE 600W • Vanity
TECHNICAL→ P. 41
with two soft closing drawers includes polymarble basin
SMILE 800W • Vanity
with two soft closing drawers includes polymarble basin
• 600x420mm
• 800x480mm
• White
• White
two pack lacquer gloss finish finish available: SMILE 600R
• Rosewood
SMILE 900W • Vanity
two pack lacquer gloss finish finish available: SMILE 800R
• Rosewood
TECHNICAL→ P. 41
with two soft closing drawers includes polymarble basin
SMILE 1200SW • Vanity
• 1200x480mm
• White
• White
two pack lacquer gloss finish finish available: SMILE 900R
TECHNICAL→ P. 41
with two soft closing drawers includes polymarble basin
• 900x480mm
• Rosewood
TECHNICAL→ P. 41
two pack lacquer gloss finish finish available: 1200SR
• Rosewood
VANITIES 11
SMILE 1200DW
TECHNICAL→ P. 41
• Vanity
SMILE 1500DW
with two soft closing drawers includes double polymarble basin • 1200x480mm • White two pack lacquer gloss finish • Rosewood finish available: SMILE 1200DR
• Vanity
SMILE 600F
SMILE 800F
• Vanity
TECHNICAL→ P. 41
with two soft closing drawers includes polymarble basin
with two soft closing drawers includes double ceramic or glass basin • 1500x460mm • White two pack lacquer gloss finish • Rosewood finish available: SMILE 1500DR
• Vanity
• 800x480mm
• White
• White
two pack lacquer gloss finish finish available: SMILE 600F-R
TECHNICAL→ P. 41
with two soft closing drawers includes polymarble basin
• 600x420mm
• Rosewood
TECHNICAL→ P. 41
two pack lacquer gloss finish finish available: SMILE 800F-R
• Rosewood
SMILE WALL HUNG / FLOOR SERIES
Smile series available in rosewood
12 VANITIES
SMILE FLOOR SERIES & MILTON
Smile series available in rosewood
SMILE 900F • Vanity
TECHNICAL→ P. 41
with two soft closing drawers includes polymarble basin
• 900x480mm • White
two pack lacquer gloss finish finish available: SMILE 900F-R
• Rosewood
SMILE 1200DF-W
TECHNICAL→ P. 41
• Vanity
SMILE 1200SF-W • Vanity
with two soft closing drawers includes single polymarble basin • 1200x480mm • White two pack lacquer gloss finish • Rosewood finish available: SMILE 1200SF-R
MILTON1000-W TECHNICAL→ P. 40
with two soft closing drawers includes double polymarble basin • 1200x480mm • White two pack lacquer gloss finish • Rosewood finish available: SMILE 1200DF-R
• Vanity
TINY-400W TECHNICAL→ P. 40
PICASSO MINI-400W
• Slimline
• Slimline
vanity with soft closing door, includes polymarble basin • 400x630x220mm • White two pack lacquer gloss finish • Rosewood finish available: Tiny-400R
TECHNICAL→ P. 41
with two soft closing drawers includes polymarble basin
• 1000x500x480mm • White •
oak textured finish or Chestnut colour available Also available in 600mm size
TECHNICAL→ P. 40
vanity with soft closing door, includes ceramic basin • 400x630x220mm • Wall hung and floor both available • White two pack lacquer gloss finish
VANITIES 13
SISCO 1200 • Vanity
TECHNICAL→ P. 42
with soft closing drawers and doors
• 1200x450x800mm • White
two pack lacquer gloss finish kicker available • Match with basin 9120E OR GB1200 • Rosewood finish available: Sisco 1200R • Additional
SISCO 600 • Vanity
TECHNICAL→ P. 42
with soft closing drawers
SISCO 750 • Vanity
TECHNICAL→ P. 42
with soft closing drawers
SISCO 900 • Vanity
with soft closing drawers and doors
• 600x450x800mm
• 750x450x800mm
• 900x450x800mm
• White
• White
• White
• Additional
• Additional
• Additional
two pack lacquer gloss finish kicker available • Match with basin 9060E OR GB600 • Rosewood finish available: Sisco 600R
two pack lacquer gloss finish kicker available • Match with basin 9075E OR GB750 • Rosewood finish available: Sisco 750R
TECHNICAL→ P. 42
two pack lacquer gloss finish kicker available • Match with basin 9090E OR GB900 • Rosewood finish available: Sisco 900R
SISCO SERIES
Sisco series available in rosewood
BASINS
BASINS 15
TECHNICAL→ P. 44
• Beautiful eggshell feel with perfect lines and curves. • Deeper & more refined than ceramic to compliment modern bathroom. • UV resistant & good durability.
• Now available in luster gloss finish & matte
1301 TECHNICAL→ P. 44 • Solid
surface basin available in gloss or matte 1301G / Matte 1301M • 590x350x105mm • Gloss
1320 TECHNICAL→ P. 44
1321 TECHNICAL→ P. 44
• Solid
surface basin available in gloss or matte 1320G / Matte 1320M • 420x420x100mm
• Solid
• Gloss
• Gloss
1312
1370 TECHNICAL→ P. 44
TECHNICAL→ P. 44
surface basin available in gloss or matte 1321G / Matte 1321M • 580x340x100mm
• Solid
• Solid
• Gloss
• Gloss
surface basin available in gloss or matte 1312G / Matte 1312M • 550x320x150mm
surface basin available in gloss or matte 1370G / Matte 1370M • 550x450x110mm
SOLID SURFACE
SOLID SURFACE BASINS
16 BASINS
VESSEL BASINS GOO1 TECHNICAL→ P. 44
G003 TECHNICAL→ P. 44
• Ceramic
• Ceramic
floor standing vessel basin with overflow 550x515x850mm
floor standing vessel basin with overflow 510x460x850mm
BASINS 17
B208 TECHNICAL→ P. 44
• Ceramic
• Ceramic
4018 TECHNICAL→ P. 44
4019 TECHNICAL→ P. 44
• Art
• Art
• Sanitary
• Sanitary
basin with overflow 440x440x100mm
Basin ware of vitreous china • Pattern of environmental protection 385x385x140mm
basin 415x415x120
Basin ware of vitreous china • Pattern of environmental protection 500x390x135mm
CERAMIC BASINS
B194 TECHNICAL→ P. 44
18 BASINS
9E SERIES 9120E
9060E • Ceramic
basin with overflow
• Ceramic
basin with overflow
• 600x450x200mm
• 1200x450x200mm
9075E
9120EE
• Ceramic
basin with overflow
• Ceramic
basin double with overflow
• 750x450x200mm
• 1200x450x200mm
9090E
9150EE
• Ceramic
basin with overflow
• 900x450x200mm
• Ceramic
basin double with overflow
• 1500x450x200mm
BASINS 19
GBSMILE-600
GBSMILE-900
• Black
glass: GBSMILE-600-B • White glass: GBSMILE-600-W • 600x420x15mm
• Black
GBSMILE-800
GBSMILE-1200
• Black
• Black
glass: GBSMILE-800-B • White glass: GBSMILE-800-W • 800x480x15mm
glass: GBSMILE-900-B • White glass: GBSMILE-900-W • 900x480x15mm
glass: GBSMILE-1200-B • White glass: GBSMILE-1200-W • 1200x480x15mm
GLASS SERIES VANITY BASINS GB600
GB750
GB900
• Black
glass: GB600-B glass: GB600-W • 600x460x15mm
• Black
glass: GB750-B glass: GB750-W • 750x460x15mm
• Black
• White
• White
• White
GB1200
GB1500
GB1500
• Black
• Black
• Left
• White
• White
• Black
glass: GB1200-B glass: GB1200-W • 1200x460x15mm • Double basin
glass: GB1500-B glass: GB1500-W • 1500x460x15mm • Double basin
glass: GB900-B glass: GB900-W • 900x460x15mm
or right single basin glass: GB1500-B-S-L/R • White glass: GB1500-W-S-L/R • 1500x460x15mm
GLASS SERIES
GLASS SERIES SMILE VANITY BASINS
MIRRORS & CABINETS
MIRRORS & CABINETS 21
TECHNICAL→ P. 45
AUSTIN600
AUSTIN750
• Shaving
cabinet-pencil edge Light above mirrors. • Double door Unit. • 600x155x750mm • White gloss finish: Austin600 • Rosewood finish: Austin600-R
• Shaving
AUSTIN900
AUSTIN1200
• Shaving
• Shaving
cabinet-pencil edge Light above mirrors. • Double door Unit. • 900x155x750mm • White gloss finish: Austin900 • Rosewood finish: Austin900-R
cabinet-pencil edge Light above mirrors. • Double door Unit. • 750x155x750mm • White gloss finish: Austin750 • Rosewood finish: Austin750-R
cabinet-pencil edge Light above mirrors. • Three door Unit • 1200x155x750mm • White gloss finish: Austin1200 • Rosewood finish: Austin1200-R
AUSTIN1500 • Shaving
cabinet-pencil edge Light above mirrors. • Three door Unit. • 1500x155x750mm • White gloss finish: Austin1500 • Rosewood finish: Austin1500-R
SMILE SERIES
TECHNICAL→ P. 45
SMILE600-MC
SMILE900-MC
• Shaving cabinet-pencil edge.
• Shaving
• Double
door unit. • 600x700x150mm • White gloss finish: Smile600-MC • Rosewood finish: Smile600-MC-R
• Double
SMILE750-MC
SMILE1200-MC
• Shaving
cabinet-pencil edge door unit. • 750x700x150mm • White gloss finish: Smile750-MC • Rosewood finish: Smile750-MC-R
• Shaving
• Double
• Three
SMILE800-MC
SMILE1500-MC
• Shaving
• Shaving
• Double
• Three
cabinet-pencil edge door unit. • 800x700x160mm • White gloss finish: Smile800-MC • Rosewood finish: Smile800-MC-R
cabinet-pencil edge door unit. • 900x700x160mm • White gloss finish: Smile900-MC • Rosewood finish: Smile900-MC-R
cabinet-pencil edge door unit. • 1200x700x160mm • White gloss finish: Smile1200-MC • Rosewood finish: Smile1200-MC-R
cabinet-pencil edge door unit. • 1500x700x160mm • White gloss finish: Smile1500-MC • Rosewood finish: Smile1500-MC-R
AUSTIN & SMILE SERIES
AUSTIN SERIES
22 MIRRORS & CABINETS
STORAGE & SIDE CABINETS
STORAGE & SIDE CABINETS
TECHNICAL→ P. 46
SMILE SC
MIRELLA
S SERIES
EDEN
• Side
• Mirror
• Side
• Side
cabinet
side cabinet
cabinet
cabinet
• 1500x300x400mm
• 1600x250x400mm
• 1600x300x300mm
• 1800x300x300mm
• White
• Exposed
• White
• Mirror
two pack lacquer gloss finish • Rosewood finish: SC-R • Right opening: SA080-R • Left opening: SA080-L
or right
shelves on left
two pack lacquer gloss finish • Right opening: SA080-R • Left opening: SA080-L
with white two pack lacquer gloss finish
MIRRORS & CABINETS 23
MIRRORS
MB / MP
MR
• 20mm
bevel (MB) or pencil (MP) edge backed bathroom mirror with brackets • MB6090 / MP6090 600x900x6mm • MB7590 / MP7590 750x900x6mm • MB9090 / MP9090 900x900x6mm • MB1290 / MP1290 1200x900x6mm • MB1590 / MP1590 1500x900x6mm
• Pencil
• Silver
• Round
MOB
MOW
• Bevel
• Bevel
• MOB7590
• MOW7590
edge mirror on pencil edge glass 750x900x6mm • MOB9090 900x900x6mm • MOB1290 1200x900x6mm • MOB1590 1500x900x6mm
edge silver backed bathroom mirror with brackets • MR600 600mm diametre • MR900 900mm diametre
edge mirror on pencil edge glass 750x900x6mm • MOW9090 900x900x6mm • MOW1290 1200x900x6mm • MOW1590 1500x900x6mm
SHOWERS
SHOWERS 25
TECHNICAL→ P. 47
• 6mm
safety glass, featuring easy clean coating be installed directly on tiles, acrylic tray or with acrylic liner • Quick release panels for easy cleaning • Profiles give tolerance for non-plumb walls • Anti rust or spotting aluminium profiles • Can
→→ VFS-C10 : 960x960x2000mm Match with D101 or VGT-R10 series →→ VFS-C90 : 860x860x2000mm Match with D909 or VGT-R90 » series
SEMI-FRAMELESS SHOWER PIVOT OR SLIDING DOOR
TECHNICAL→ P. 47
• 6mm
safety glass, featuring easy clean coating be installed directly on tiles, acrylic tray or with acrylic liner • Anti rust or spotting aluminium profiles • Profiles give tolerance for non plumb walls • Can
WITH PIVOT DOOR (SHOWN IN IMAGE) →→ VFS-1290 : 1160x860x2000mm Match with D-1290CR or VGT-ST1290 →→ VFS-1280 : 1160x760x2000mm Match with D-1280CR or VGT-ST1280 →→ VFS-S10 : 960x960x2000mm Match with D-1010CR or VGT-S10 →→ VFS-S90 : 860x860x2000mm Match with D-9090CR or VGT-S10 WITH SLIDING DOOR →→ VFT 1290 : 1160x860x2000mm Match with D-1290CR or VGT-ST1290 →→ VFT 1280 : 1160x760x2000mm Match with D-1280CR or VGT-ST1280 DOORS FOR ALCOVE USE →→ VFS-1280-DOOR : 1150–1210x2000mm →→ VFS-S10-DOOR : 950–1010x2000mm →→ VFS-S90-DOOR : 850–910x2000mm
SHOWERS
CURVED SHOWER
26 SHOWERS
SHOWERS
FRAMELESS SHOWER
TECHNICAL→ P. 47
• Treated
safety glass, featuring easy clean coating be installed directly on tiles, acrylic tray or with acrylic liner • High quality stainless steel handle and hardware, bracing system included • Optional black or silver handle or finger pull design • Profiles give tolerance for non plumb walls • Magnetic seals and hinge panel seals optional • 8mm thick hinged door & side panel, 10mm thick return • Can
→→ VTS-R1290 : 1150-1210x860x2000mm Match with D-1290CR or VGT-ST1290 →→ VTS-R1280 : 1150-1210x760x2000mm Match with D-1280CR or VGT-ST1280 →→ VTS-S10 : 950-1010x960x2000mm Match with D-1010CR or VGT-S10 →→ VTS-S90 : 850-910x860x2000mm Match with D-9090CR or VGT-S10 DOORS FOR ALCOVE USE →→ VTS-R1290-DOOR : 1150 – 1200x2000mm →→ VTS-S10-DOOR : 950 – 1000x2000mm →→ VTS-S90-DOOR : 850 – 900x2000mm
SLIDING FRAMELESS SHOWER TECHNICAL→ P. 48 • 10mm
safety glass, featuring easy clean coating be installed directly on tiles, acrylic tray or with acrylic liner • High quality stainless steel handle and rollers • Optional black or silver handle or finger pull design • Profiles give tolerance for non plumb walls • Left and right opening • Can
→→ VSS-R1490 : 1360x860x2000mm Match with VGT-S1490 or D-1490CR →→ VSS-R1290 : 1160x860x2000mm Match with D-1290CR or VGT-S1290 →→ VSS-R1280 : 1160x760x2000mm Match with D-1280CR or VGT-S1280 DOORS FOR ALCOVE USE →→ VSS-R1490-DOOR : 1330 – 1360x2000mm →→ VSS-R1290-DOOR : 1130 – 1140x2000mm
SHOWERS 27
• 10mm
safety glass, featuring easy clean coating be installed directly on tiles, acrylic tray or with acrylic liner • Profiles give tolerance for non plumb walls • Can
→→ →→ →→ →→ →→
VTS-FP1300 : 1300x10x2000mm VTS-FP1200 : 1200x10x2000mm VTS-FP900 : 900x10x2000mm VTS-FP760 : 740x10x2000mm VTS-FP150 : 150x10x2000mm
SHOWERS
FRAMELESS WALK IN SHOWER* TECHNICAL→ P. 48
*Custom sizes available on request Optional brace available: →→ Brace-12
ACRYLIC WALL LINER • Use
recommended glue on back only to adhere to wall • Sanitary grade acrylic white : 900x900x2000mm : 1000x1000x2000mm • 1280L : 1200x800x2000mm • 1290L : 1200x900x2000mm • 1490L : 1400x900x2000mm
ACRYLIC WALL LINER MOULDED WITH GLASS SHELVES • Use
recommended glue on back only to adhere to wall • Sanitary grade acrylic white
• 900L
• 1000L
• 900M
: 900x900x2000mm : 1000x1000x2000mm • 1280M : 1200x800x2000mm • 1290M : 1200x900x2000mm • 1490M : 1400x900x2000mm • 1000M
28 SHOWERS
SHOWERS BASES
SQUARE STRIP DRAIN SHOWER BASE TECHNICAL→ P. 49
RECTANGULAR STRIP DRAIN SHOWER BASE TECHNICAL→ P. 49
• Sanitary
ware grade acrylic self supporting base easy clean waste system • Stainless steel strip drain • 20mm high check in up stand • Super thin profile
• Sanitary
• Fits
• Fits
→→ VGT-S10 : 1000x1000x60mm
→→ VGT-S1490 : 1400x900x60mm
→→ VGT-S90 : 900x900x60mm
→→ VGT-S1280 : 1200x800x60mm
ware grade acrylic self supporting base easy clean waste system • Stainless steel strip drain • 20mm high check in up stand • Super thin profile
→→ VGT-S1290 : 1200x900x60mm
ROUND STRIP DRAIN SHOWER BASE TECHNICAL→ P. 49
ACRYLIC SQUARE SHOWER BASE TECHNICAL→ P. 49
• Sanitary
ware grade acrylic self supporting base easy clean waste system • Stainless steel strip drain • 20mm high check in up stand • Super thin profile
• Sanitary
• Fits
• Slimmest
→→ VGT-R10 : 1000x1000x60mm
→→ D-1010CR : 1000x1000mm
→→ VGT-R90 : 900x900x60mm
→→ D-9090CR : 900x900mm
ware grade acrylic self supporting base acrylic tray on the market • Fits easy clean waste system • High check in up stand • Super thin profile
SHOWERS 29
TILEGRATE TECHNICAL→ P. 49
• Sanitary
• Lineal
• Slimmest
• Stainless
ware grade acrylic self supporting base acrylic tray on the market • Fits easy clean waste system • Non-slip surface • 20mm high check in up stand • Super thin profile
tile insert grate steel construction • Centre waste 40mm or offset →→ SG-800T : 800mm (L) →→ SG-900T : 900mm (L)
ADDITIONAL WATER PROOFING FLANGE AND GULLY TRAP KIT →→ • GKIT • Add to any Strip Drain to complete full kit • GKIT includes gully trap and water proofing flange
→→ SG-1000T : 1000mm (L)
→→ D-101-1000 : 1000x1000mm
→→ SG-1200T : 1200mm (L)
→→ D-101-900 : 900x900mm
→→ SG-1500T : 1500mm (L) →→ SG-1800T : 1800mm (L)
ACRYLIC RECTANGULAR SHOWER BASE TECHNICAL→ P. 49
LINEAL GRATE
• Sanitary
ware grade acrylic self supporting base acrylic tray on the market • Fits easy clean waste system • Non-slip surface • 20mm high check in up stand • Super thin profile
• Lineal
• Slimmest
• Stainless
→→ D-1290CR : 1200x900mm
→→ SL-1000T : 1000mm (L)
→→ D-1280CR : 1200x800mm
→→ SL-1200T : 1200mm (L)
→→ D-1490CR : 1400x900mm
→→ SL-1500T : 1500mm (L)
grate steel construction • Centre waste 40mm or offset →→ SL-800T : 800mm (L) →→ SL-900T : 900mm (L)
TECHNICAL→ P. 49 ADDITIONAL WATER PROOFING FLANGE AND GULLY TRAP KIT →→ • GKIT • Add to any Strip Drain to complete full kit • GKIT includes gully trap and water proofing flange
→→ SG-1800T : 1800mm (L)
EC1
EC2
• Easy
• Easy
clean waste for shower base
clean waste for shower base
SHOWERS BASES
ACRYLIC ROUND SHOWER BASE TECHNICAL→ P. 49
BATHS
BATHS 31
BATHS
B6819B-1700/1500 TECHNICAL→ P. 50
B6815B-1700/1500 TECHNICAL→ P. 50
• Back
to wall acrylic bath 1500x740x580mm • Waste 40mm with overflow • Sanitary grade acrylic construction • Adjustable legs
• Back
• 1700x800x600,
• 1700x800x600,
B6813B-1700/1500 TECHNICAL→ P. 50
B6815-1720/1600/1500 TECHNICAL→ P. 50
• Square
free standing acrylic bath 1500x750x600 mm • Waste 40mm with overflow • Sanitary grade acrylic construction • Adjustable legs
• Oval
• 1700x800x600,
• 1720x820x600,
B6515-1700/1500 TECHNICAL→ P. 50
B6518-1800 TECHNICAL→ P. 50
• Spoon
• Flared
• 1700x800x600,
• 1800x800x660
free standing acrylic bath 1500x750x600mm • Waste 40mm with overflow • Sanitary grade acrylic construction • Adjustable legs
to wall acrylic bath 1500x740x580mm • Waste 40mm with overflow • Sanitary grade acrylic construction • Adjustable legs
free standing acrylic bath 1600x750x600, 1500x750x600mm • Waste 40mm with overflow • Sanitary grade acrylic construction • Adjustable legs
design acrylic bath
• Waste
40mm with overflow grade acrylic construction • Adjustable legs • Sanitary
TOILETS
TOILETS 33
TOILETS – BACK TO WALL
TORNADO TECHNICAL→ P. 51
TORNADO 2
• Non
marking bowl design action flush • Soft closing seat cover with single button release • 4.5/3L Dual Flash adjustable – flush up to 6.4L • P&S trap back to wall toilet • 660x360x850mm • S-Trap 100-150mm, P-Trap 180mm • T-180 connector can increase S -trap to 190mm from wall
• Non
• Tornado
• Tornado
SIERRA TECHNICAL→ P. 51
ROCCO
• P-Trap
• Back
• Soft
• 710x360x850mm
• 660x345x850mm
• S-Trap
• S-Trap
• P-Trap
• P-Trap
180mm closing seat cover • 4.5/3L Dual Flash adjustable – flush up to 6.4L • P&S trap back to wall toilet • 660x380x830mm • S-Trap 90-180mm • T-180 connector can increase S-trap to 220mm from wall
TECHNICAL→ P. 51
marking bowl design action flush • Soft closing seat cover with single button release • 4.5/3L Dual Flash adjustable – flush up to 6.4L • P&S trap back to wall toilet • 660x360x850mm • S-Trap 100-150mm, P-Trap 180mm • T-180 connector can increase S -trap to 190mm from wall
TECHNICAL→ P. 51
to wall toilet (all toilets P&S trap)
70-220mm 185mm • Soft closing seat cover • 6.4/3.4L Dual Flash – adjustable flush up to 6.4L
ANZO TECHNICAL→ P. 51 • Back
to wall toilet (all toilets P&S trap)
70-220mm 185mm • Soft closing seat cover • 4.5/3L Dual Flash adjustable – flush up to 6.4L
34 TOILET
INWALL TOILETS ROCCO INWALL • Back
TECHNICAL→ P. 52
to wall floor pan
ANZO INWALL • Back
to wall floor pan
• 530x390x360mm
• 520x400x360mm
• P-trap
• P-trap
• S-trap
• S-trap
185mm 105mm • Soft closing seat cover
TECHNICAL→ P. 52
185mm 105mm • Soft closing seat cover
8801.13.1 WALL HUNG IN-WALL CISTERN TECHNICAL→ P. 53
8801.05.1 FLOOR STANDING PAN IN-WALL CISTERN TECHNICAL→ P. 53
8801.13.2 FLOOR STANDING PAN IN-WALL CISTERN TECHNICAL→ P. 53
• Adjustable
• Adjustable
• Adjustable
• Single
• Single
• Single
flush volume and double flush options • Water supply connection at the top • Maximum flush can adjust between 6L/7.5L • Water Marked & Water Rated
flush volume and double flush options • Water supply connection at the top • Maximum flush can adjust between 6L/7.5L • Water Marked & Water Rated
flush volume and double flush options • Water supply connection at the top • Maximum flush can adjust between 6L/7.5L • Water Marked & Water Rated
TOILETS 35
INWALL TOILETS
ANZO WALL • Wall
TECHNICAL→ P. 52
hung toilet pan
ROCCO WALL • Wall
hung toilet pan
• 505x360x360mm
• 520x360x360mm
• Soft
• Soft
closing seat cover
closing seat cover
KCLED-B
A06
• Black
• Stainless
glass with LED power sourced lights, powered by battery or power source.
TECHNICAL→ P. 52
steel flush plate with finger mark free finish buttons
• Pneumatic
36 TOILET
TOILETS – ACCESSORIES
T180
A-10
• S-Trap
• Wall-hung
basin screw
• For
offset 60-220mm • User for wall faced toilets
T3302
A04
• Standard
• Fittings
• For
• Used
S-Trap offset 60-180mm • User for wall faced toilets
A05
for seat covers SC110, SC130, SC016, SC008, SC042
A02
• Universal
inlet adaptor • Used in all toilet cisterns for converting top inlet into bottom inlet
• Cistern
top fixing screw nut
set
2105A
A01
• Back
• Wall-hung
inlet valve for water pressure between 0.03Mpa-2.0Mpa • Water level is adjustable • Inlet water speed fast • Stop water speed fast design, Low noise • Use
toilet fixing screw
A09 • Bungs
for pan holes
A08 • Black
rubber donut
K006 • Hose
A07 • Cistern • Used
plug for all toilet cisterns
KC-3304 • Off
set toilet connector PP, adjustable dimension: 33mm
• Material:
KS003 • Outlet
valve
40mm
TECHNICAL DRAWINGS
TECHNICAL DRAWINGS 39
All sizing is approximate and subject to change without notice. Installer must check product on-site before plumbing and installing
CONTENTS 40 VANITIES 44 BASINS 45 MIRROR AND STORAGE CABINETS 47 SHOWERS & BASES 50 BATHS 51 TOILETS 54 INSTALLATION INSTRUCTIONS
40 TECHNICAL DRAWINGS
VANITIES
All sizing is approximate and subject to change without notice. Installer must check product on-site before plumbing and installing
590
PICASSO600
PICASSO750
PICASSO900
PICASSO1200S
600
610
PICASSO1200D
PICASSO15D
TINY
MILTON1000-W
TECHNICAL DRAWINGS 41
VANITIES
All sizing is approximate and subject to change without notice. Installer must check product on-site before plumbing and installing
SMILE 600W
SMILE 800W
SMILE 1200SW
SMILE 900W
SMILE 600F
SMILE 1200DW
SMILE 900F
SMILE 800F
SMILE 1200DF-W
SMILE 1200SF-W
42 TECHNICAL DRAWINGS
VANITIES
All sizing is approximate and subject to change without notice. Installer must check product on-site before plumbing and installing 590/780/890
ALESSIA-600, 750, 900
ALESSIA-1200 590/740/890
ALESSIA-1500
LAPO-600, 750, 900 1190
455
455
1490
40
40
450
16
455
1158
ALESSIA-1500
16
436
18
LAPO-1200
LAPO-1500
LAPO-1200W
SISCO-750
455
SISCO-900
SISCO-1200
TECHNICAL DRAWINGS 43
VANITIES
All sizing is approximate and subject to change without notice. Installer must check product on-site before plumbing and installing
25
400
400
6
598
6
6
6
900 1200 900 25
25 400400 400
6 7486
400
6
6 898
6
6
898 6
6
6
1498
400
6
61198
6
6
6 6 6 1198 598
6
6
6
6
4006 458 6
458
6
748
40
6
25
6
6 1198 1200
1198 6 1200
400
6 6
6 6
1498
LINEAR 1500D 1198
1198
460
400
1198
6
6
400
400
400
400
6
1500
25
25
1198 1200
25 40
LINEAR 1200 1200S 1200
460
400
LINEAR 1200D
6
61498 6
400
6
25
25
400
460
400
25 25
6
6 898 6
750
25
1200
25
6
6 898
6
600 25
25
1198
25 6
6
1200
1200
400
LINEAR 900 25
1500
400
6
6
6
6
6
6
1500
25
25
6
6 748
40
LINEAR 750
750
6
6
25 400
400
748
LINEAR 600
6
25
25
6
6 598
900
900
400
400 6
750
750
25
0
8
600
600
400
458
6
44 TECHNICAL DRAWINGS
BASINS
All sizing is approximate and subject to change without notice. Installer must check product on-site before plumbing and installing
590
580 490
420 360
210
170
210
290
Ø 45
KKR-1312
Product name:
Material:
Bathroom Basin
Serial number:
550
Notes:
Drawn by:
550
Checker:
KINGKONREE
Date:
Scale:
Material:
1:6
195 55
110
Scale:
Notes:
Checker:
Date:
KINGKONREE
440mm
1:5
2014.08.12
Ø 35
Ø35mm Ø 45
450 328
Notes:
Ø45mm
100mm
135mm
85
110 12
150
1370
KKR-1320
Solid Surface
300mm
1312
Serial number:
Bathroom Basin
2014.08.11 Drawn by:
Ø 45
320
KKR-1301 Product name:
Solid Surface
80
80
1321
440mm
1320
100
1301
100
105
85
340 310
Ø 45
420 360
350
Ø45
B194 Product name:
Material:
460
400mm
Bathroom Basin
Serial number:
Solid Surface
415mm1:5 Scale:
Notes:
Drawn by:
KKR-1370
Checker:
KINGKONREE
Date:
2014.08.12
850
26
90
210
30mm
6
GOO1
515 74
415mm
510
35
400mm
76
120mm
256-W
B208
4018
4019
550 70 310
33 850
23 5
G003
260mm
Drawn b
TECHNICAL DRAWINGS 45
MIRROR CABINETS
All sizing is approximate and subject to change without notice. Installer must check product on-site before plumbing and installing 750
900
155
155
750
750
AUSTIN750
AUSTIN900 155
1200
1500
750
750
AUSTIN1200
AUSTIN1500 150
150
750
600
700
700
SMILE600-MC
SMILE750-MC 160
160
800
900
700
700
SMILE800-MC
SMILE900-MC 160
160
1500
1200
700
SMILE1200-MC
700
SMILE1500-MC
155
46 TECHNICAL DRAWINGS
STORAGE & SIDE CABINETS
All sizing is approximate and subject to change without notice. Installer must check product on-site before plumbing and installing
300
400
400
250 16 300 16 300 16
1600
304
1500
16 300 16 300 16 16 16 148 220 250
SMILE SC
MIRELLA 300
MIRELLA
400
300
298
300
16
300
286
356.5
5
5
16
105 90 105
285 1200
340
285
1600
16
5 285 16 396
1800 40
343 16
360
340
16
16
300
356.5
300
S SERIES
EDEN
1800
TECHNICAL DRAWINGS 47
SHOWERS
All sizing is approximate and subject to change without notice. Installer must check product on-site before plumbing and installing
Min 476mm 546mm 546mm Max 476mm 546mm 546mm Model 800x800mm 900x900mm 1000x1000mm
CURVED SHOWER
SEMI-FRAMELESS SHOWER - PIVOT
→→ VFS-C10 : 960x960x2000mm Match with D101 or VGT-R10 series →→ VFS-C90 : 860x860x2000mm Match with D909 or VGT-R90 series
→→ VFS-1290 : 1160x860x2000mm » Match with D-1290CR or VGT-ST1290 →→ VFS-1280 : 1160x760x2000mm » Match with D-1280CR or VGT-ST1280 →→ VFS-S10 : 960x960x2000mm » Match with D-1010CR or VGT-S10 →→ VFS-S90 : 860x860x2000mm » Match with D-9090CR or VGT-S10
0 /76
860
11
60
60 0/7 /86 960
850 -91 0/9 50101 0/1 150 /12 10
DOORS FOR ALCOVE USE →→ VFS-1280-DOOR : 1150–1210x2000mm →→ VFS-S10-DOOR : 950–1010x2000mm →→ VFS-S90-DOOR : 850–910x2000mm
Min 856mm 956mm 1156mm
Model 900x900mm 1000x1000mm 1200x900 or 800mm
Max
2000
Min
Max 874mm 974mm 1174mm
SL
IDI
NG
SEMI-FRAMELESS SHOWER - SLIDING
FRAMELESS SHOWER
→→ VFT 1290 : 1160x860x2000mm Match with D-1290CR or VGT-ST1290 →→ VFT 1280 : 1160x760x2000mm Match with D-1280CR or VGT-ST1280
→→ VTS-R1290 : 1150-1210x860x2000mm Match with D-1290CR or VGT-ST1290 →→ VTS-R1280 : 1150-1210x760x2000mm Match with D-1280CR or VGT-ST1280 →→ VTS-S10 : 910-950x960x2000mm Match with D-1010CR or VGT-S10 →→ VTS-S90 : 850-910x860x2000mm Match with D-9090CR or VGT-S10
DOORS FOR ALCOVE USE →→ VTS-R1290-DOOR : 1150-1210x2000mm →→ VTS-S10-DOOR : 950-1010x2000mm →→ VTS-S90-DOOR : 850-910x2000mm
48 TECHNICAL DRAWINGS
SHOWERS CONT.
Min 1140mm 1140mm 1340mm
Max 1160mm 1160mm 1360mm
Model 1200x800mm 1200x900mm 1400x900mm
All sizing is approximate and subject to change without notice. Installer must check product on-site before plumbing and installing
50
0/1
/86
60
/9 60
6 0/7
11
15
2000
0
Min 1160mm 1160mm 1360mm
Max 1170mm 1170mm 1370mm
Model 1200x800mm 1200x900mm 1400x900mm
SLIDING FRAMELESS SHOWER
ADDITIONAL PANEL SHOWER SIZES
→→ VSS-R1490 : 1360x860x2000mm » Match with VGT-S1490 →→ VSS-R1290 : 1160x860x2000mm » Match with D-1290CR or VGT-S1290 →→ VSS-R1280 : 1160x760x2000mm » Match with D-1280CR or VGT-S1280
→→ VTS-FP1300 : 1300x10x2000mm →→ VTS-FP1200 : 1200x10x2000mm →→ VTS-FP900 : 900x10x2000mm →→ VTS-FP760 : 760x10x2000mm →→ VTS-FP150 : 150x10x2000mm (Support Glass)
DOORS FOR ALCOVE USE →→ VSS-R1490-DOOR : 1330 – 1360x2000mm →→ VSS-R1290-DOOR : 1130 – 1140x2000mm
RECTANGULAR STRIP DRAIN SHOWER BASE →→ VGT-S1490 : 1400x900x60mm →→ VGT-S1280 : 1200x800x60mm →→ VGT-S1290 : 1200x900x60mm
Brace optional extra
TECHNICAL DRAWINGS 49
SHOWER BASES
All sizing is approximate and subject to change without notice. Installer must check product on-site before plumbing and installing
1000/900 500/450
500/450 1000/900
ACRYLIC ROUND SHOWER BASE →→ D-101-1000 : 1000x1000mm →→ D-101-900 : 900x900mm
1000/900 500/450
1000/900
500/450
SQUARE STRIP DRAIN SHOWER BASE
ROUND STRIP DRAIN SHOWER BASE
ACRYLIC SQUARE SHOWER BASE
→→ VGT-S10 : 1000x1000x60mm →→ VGT-S90 : 900x900x60mm
→→ VGT-R10 : 1000x1000x60mm →→ VGT-R90 : 900x900x60mm
→→ D-1010CR : 1000x1000mm →→ D-9090CR : 900x900mm
900/800
40mm
450/400
65mm 65mm
70mm
40mm
25mm 65mm
ACRYLIC RECTANGULAR SHOWER BASE →→ D-1290CR : 1200x900mm →→ D-1280CR : 1200x800mm
TILE GRATE
800/900/1000/1200/1500mm
600/700
50mm
40mm
200
800/900/1000/1200/1500mm
50mm
1200/1400
LINEAL GRATE
12mm
65mm
70mm
50 TECHNICAL DRAWINGS
BATHS
All sizing is approximate and subject to change without notice. Installer must check product on-site before plumbing and installing
800/750 800/750
1700/1500
1700/1500 1700/1500
1700/1500
600
600
600 600
75mm under bath
75mm under bath
850/750 850/750
850/750 850/750 400/375 400/375
1700/1500 400 400 480/460 480/460
850/750 800/750 800/750
50
50
375
50
800/750 50
30
B6819B-1700/1500
B6813B-1700/1500
460
600 600
460
470
470
600
470
1050
1720/1600/1500 1720/1600/1500 860/800/750
1700/1500 850/750
860/800/750
410/375 410/375
375
820/750 820/750
800/750
50 50
50
30
B6815-1720/1600/1500
B6515-1700/1500 1800 1720
470
600
1050
440
500
660
800 750
1050
600 1200
B6518-1800
B6815B-1700/1500
TECHNICAL DRAWINGS 51
TOILETS – BACK TO WALL
All sizing is approximate and subject to change without notice. Installer must check product on-site before plumbing and installing
660 135
360
360
40mm
115
all
dw
she
fini 350
850
420
850
850
Note: Ensure back inlet connection extends 40mm from finished wall
780 110
135
145 660
60
660
180
TORNADO 660 140
360
95
380
40mm l
al dw
she
355
425
850
fini 850
845
Note: Ensure back inlet connection extends 40mm from finished wall
470
795
440 140
660
180
665
80-220MIN/MAX
TORNADO 2 360660 135
380
40mm
115
850
420
350
830
830
Note: Ensure back inlet connection extends 40mm from finished wall
780 135 180
660 80
SIERRA 160
345
55
all
dw
she
fini
660
145
345 40mm l
al dw
e
335
sh fini
440
840
840 100
160
185
100
400
400
Note: Ensure back inlet connection extends 40mm from finished wall
185
ANZO 185
345
55
345 40mm l
al dw
e
sh fini 400
450
850
185
ROCCO
850 100 185
100 185
390
390
Note: Ensure back inlet connection extends 40mm from finished wall
52 TECHNICAL DRAWINGS
INWALL TOILETS
All sizing is approximate and subject to change without notice. Installer must check product on-site before plumbing and installing
50
55 160 100
100
345
390
185 530
ROCCO INWALL
55 157 100
400
345
188 105
ANZO INWALL
360 140
520
180
460 520
55
135 335
300
100 200
390 40
ROCCO WALL
358 153
505
ANZO WALL
180
420
345
55
135 310
100 210
400
TECHNICAL DRAWINGS 53
CISTERNS
All sizing is approximate and subject to change without notice. Installer must check product on-site before plumbing and installing
450
90
120
570
100
725
D 1160 1000
220
+20
400 -10
1050
180 230
0-200
90
1.13.1-LED/PN
1.05.1-SENSOR/MECHANICAL
450
83
510
380
1.13.2-LED/PN
90
54 INSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS - VANITIES
C
D
Press-in
Side adjustment
Removal
Height adjustment
Fit on the drawer
INSTALLATION INSTRUCTIONS 55
INSTALLATION INSTRUCTION - VANITIES
4x25
H13x4
2-Ø6 .5
H13x4 X+
X-
56 INSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS - ACRYLIC TRAY & WALL LINER PLEASE READ CAREFULLY GENERAL INFORMATION When you receive your Acrylic Tray and Wall Liner packages please check for any damage. If damage has occurred advise your supplier immediately and do not proceed with installation. DISCLAIMER We are not liable for any Acrylic Tray and Wall Liner that has not been installed correctly. TOOLS REQUIRED • Soft pencil • Knife or small saw for cutting Gib • Drill and hole saw set for plumbing fittings in liner and waste hole (timber floor) • Jig saw if large hole saw is not suitable (timber floor) • Spirit level and large square • Plane and sanding board • Rags and white spirits MATERIALS REQUIRED • 1 x Sika Silaflex NG Translucent • 3 x Sika Shower Bond • 1 x Fullers Maxibond (Ringed Acrylic Tray) • 1 x Sand and Cement slurry (Voss Strip Drain Tray) • 1 x Selleys No More Gaps Exterior WE RECOMMEND THAT A PROFESSIONAL SHOWER INSTALLER IS USED FOR INSTALLATION OF THIS PRODUCT TO ENSURE THE BEST RESULTS
INSTALLATION INSTRUCTIONS 57
IMPORTANT - PREPARATION CHECKLIST
THE FOLLOWING ITEMS MUST BE COMPLETED BEFORE INSTALLATION INSTALLATIONS - ACRYLIC TRAY & WALL LINER
Ensure that the floor is level and flat (Every amount that the tray is out of alignment will be multiplied approximately by two on the walls, so this is a critical process to checked IMPORTANT - PREPARATION CHECKLIST get right). THE FOLLOWING ITEMS MUST BE COMPLETED BEFORE INSTALLATION The tray needs full support without packers. This may require leveling Ensure that the floor is level and flat (Every amount that the tray is out of alignment will be multiplied compound orthis timber floors, or ontotimber floors sanding timber may checked approximately by twoon onconcrete the walls, so is a critical process get right). be sufficient. Ensure the base is clean prior to applying leveling compound or glue. Allneeds gapsfull around waste piping must filledleveling and flush to complete theorsupport. The tray supportthe without packers. This maybe require compound on concrete timber floors, or on timber floors sanding timber may be sufficient. Ensure the base is clean prior to applying walls must beAllplumb with internal angles at filled 90 degrees. fixingthe must levelingThe compound or glue. gaps around the wastewall piping must be and flush Solid to complete support. checked be provided in the walls behind the wall channels. Please refer to the Layout Plan from thebespecific shower enclosure to identify thebeposition The walls must plumb with internal wall anglestoatbe 90 installed degrees. Solid fixing must provided of in the walls behindsolid the wall channels. Please refer to the Layout Plan from the specific shower enclosure to be installed fixings. to identify the position of solid fixings. Correct installation of the Acrylic Tray requires a horizontal batten to support the Correct installation of the Acrylic tray (refer Diagram B).Tray requires a horizontal batten to support the tray (refer Diagram B). checked The wall board must be suitable for suitable purpose infor wetpurpose areas andinfastened as manufactures instructions The wall board must be wet areas and fastened as (Note: No paint, stopping material, sealer or sanding of the surface). manufactures instructions (Note: No paint, stopping material, sealer or sanding of checked
the surface). The plumber must be consulted so the waste fitting is in line enabling correct connection after the tray is glued inThe place. plumber must be consulted so the waste fitting is in line enabling correct checked
connection after the tray is glued in place.
DIAGRAM A:
DIAGRAM B:
HORIZONTAL BATTEN 10MM GIB BOARD STUD BOTTOM PLATE
STUD POSITION
2
SHOWER TRAY
58 INSTALLATIONS
INSTALLATION OF RING
INSTALLATIONS - ACRYLIC TRAY & WALL LINER 1
INSTALLATION OF RINGED ACRYLIC TRAY
Place tray against the wall. Mark and cut away remove to allow the unit to be fitted into the re
INSTALLATIONOF OFWALL WALLLINER LINER INSTALLATION
1. Place tray against the wall. Mark and cut away the Gib 8mm above the tray profile and remove C: ledge of tray with internal corner an Stand the linerDIAGRAM onto the back to allow the unit to be fitted into the rebate (refer Diagram 7 C).Stand the liner onto the back ledge of tray with internal corner and
7
tray. Check the lower gap for fit. If a small adjustment is needed tr
tray. Check the lower 2. Check that the upstand fits flush in with the Gib surface. If the internal corner is not 90 gap for fit. If a small adjustment is needed tri or 80thegrit sandpaper and finish with 120 grit (use a sanding board) degrees, trim out a little timber frame to suit. Always re-check of theand waste orthat 80 gritalignment sandpaper finish with 120 grit (use a sanding board). outlet is accurate. Drawatpencil lines around the edges and remove liner. 3. Check the tray is level and without any movement. Correct this point. to Itemthe Draw pencil linesRefer around edges and remove liner. 88 anything 2 of Preparation Checklist.
Measure all plumbing fittings on the wall, transfer these to the wa
4. Peel the protective layer off the upstand and the sides of9theMeasure tray but leave balance infittings on the wall, transfer these to the wall all the plumbing 9 As hole, saw protection and recheck the fit. place to protect the surface from damage during installation.hole, additional cut athe saw and recheck fit. section of cardboard from the packaging and place it on the tray.
Mark outundersides the glueand pattern for the wall liner. 30mm in from the per 5. Remove the tray and apply Fullers Maxibond adhesive to10 the Mark rings onout the the for the glue pattern the wall liner. 30mm Diagram C in from the perim 10 80mm apart inCheck vertical lines (refer Diagram D). in with the Gib su boundary underside edges. Install the tray, hold it in place with chocksapart on sideinand weighted on the that upstand fits D). flush 80mm vertical lines (refer Diagram 2 top. Leave the chocks in place during the shower install. 6. Clean off any excess glue with white spirits.
DIAGRAM D: DIAGRAM D:
INSTALLATION OF WALL LINER
trim out a little timber frame to suit. Always re-che accurate.
Check the tray is level and without any movement SH
O
WS HER OB WO ENR
DB O
N
D
7. Stand the liner onto the back ledge of tray with internal corner and edges in 3 line with the tray. 2 of Preparation Checklist. Check the lower gap for fit. If a small adjustment is needed trim with a sharp plane or 80 grit sandpaper and finish with 120 grit (use a sanding board).
Peel the protective layer off the upstand and the si protect 9. Measure all plumbing fittings on the wall, transfer these to the wall liner and drill withto a hole, saw the surface from damage during installa and recheck the fit. of cardboard from the packaging and place it on th 8. Draw pencil lines around the edges and remove liner.
4
10. Mark out the glue pattern for the wall liner. 30mm in from the perimeter and a max of 80mm apart in vertical lines (refer Diagram D). Remove the tray and apply Fullers Maxibond adhe
5
Diagram Dalong 11. Apply a generous bead of silicone NG Sealant along the top front edge upstand ofboundary the tray. Apply a generous bead of silicone NG Sealant the top front edges. Install thethe tray, Apply a generous bead ofunderside silicone NG Sealant along tophold frontit e 11 Enough sealant is applied to make a full contact with the wall liner when in place (refer 11 tray. Enough sealant is applied to make a full contact with the wal on top. Leave the during tray. Enough sealant is applied to chocks make a in fullplace contact withthe theshow wall Diagram E). (refer Diagram E).
SI
LSI CILO ICN OE N
E
(refer Diagram 12. Follow up quickly and cut the tip of the Shower Bond cartridge sufficient to give E). a 6mm bead of glue. Follow the lines as marked on the wall. (Note: Moulded liners - Apply a bead to theoff any excess glue with white spirits. 6 Clean DIAGRAM E: adhering face of the liner edges also. DIAGRAM E: 13. Refit the liner to the wall marks and starting from the inside corner apply pressure with a soft cloth to ensure the glue lines are flattened out. Brace if required. 14. Clean off excess glue with white spirits. 15. Peel back the protective film on the Acrylic Liner where the shower is to be attached. 16. Seal top edge of the liner with Selleys No More Gaps Exterior.
Follow up quickly and cut the tip of the Shower Bond cartridge su 12 Follow up quickly and cut the tip of theDiagram ShowerEBond cartridge suffi 12 bead of glue. Follow the lines as marked on the wall. (Note: Mould bead of glue. Follow the lines as marked on the wall. (Note: Mould
INSTALLATION OF VGT TRAY (VOSS STRIP DRAIN TRAY) bead to the adhering face of the liner edges also. bead to the adhering face of the liner edges also.
Prepare a weak mix of sand and cement. Ensure sufficient quantity is mixed to fill the void underneath the tray once installed. Place slurry on the floor in the Refit area underneath the liner the to tray. the wall marks and starting from the inside corne 13 Refit to the wall marks and starting from the inside corner Bed the tray down onto the slurry tapping the tray with a rubber mallet the whileliner ensuring the tray 13 soft cloth to ensure the glue lines are flattened out. Brace if requir softfollowing cloth to the glue lines are flattened out. Brace if require remains level as it is lowered into its final position. Connect the drain theensure instructions supplied. Once in position, leave the tray in place, do not stand or walk on it for min 12 hours, to Clean off excess glue with white spirits. 14 Clean allow slurry to cure. off excess glue with white spirits. 14
Peel back the protective film on the Acrylic Liner where the showe 15 Peel back the protective film on the Acrylic Liner where the shower 15
16 Seal top edge of the liner with Selleys No More Gaps Exterior. 16 Seal top edge of the liner with Selleys No More Gaps Exterior. 4
4
INSTALLATIONS 59
VOSS TERMS & CONDITIONS GENERAL TERMS All items are checked prior to dispatch. It is your responsibility to check the code against your invoice and make sure you have received the correct items and check for defects with the driver. If a defect is found you must tell the driver immediately or contact the merchant or VOSS. No returns or defects are acceptable after 7 days of delivery (no exceptions). Only install products if you are completely satisfied. Any item returned for whatever reason must be in original undamaged packaging, otherwise the return will not be accepted (No exceptions). If VOSS or its agents call out to your address for an issue with a product and the issue is caused through the faulty installation, there will be a fee payable immediately of at least $80 plus GST and parts. If the issue is a manufacturers fault no charges apply.
VANITIES Only use mild recommended cleaners for lacquer finish products. All vanities are made of moisture resistant MDF. They are not water proof so take care with splashes sitting on the product. Runner must be used gently and not forced closed. Forcing the soft close hardware voids warranties.
MIRRORS AND MIRROR CABINETS All mirrored products are always checked prior to dispatch due to their fragile nature. Please check on delivery as chips that occur after delivery are not covered by warranty. Use only ALCOHOL based cleaners on the mirror. Do not spray directly on to the mirror. Spray on cloth then wipe mirror.
SHOWER MIXERS, TAPWARE AND CHROMED PRODUCTS Tapware, and Chromed products do not use BLEACH based cleaners on any chromed products. Wipe any bleach immediately from the product. Only use warm soapy water and micro fibre cloth. Prior to install all plumbing must be run clean of debris prior to water running through the product. If cartridge is leaking and found to contain contaminants the warranty will be void and call out fee plus part fee will be payable.
MONSOON SHOWER All monsoon showers have different feed points. RMS and SMS coded monsoon showers are TOP FEED into the diverter which must be 1750 to 1850mm from finished floor. Some other models such as the Nova are bottom feed. Your installer is responsible for the checking of the feed on the monsoon prior to plumbing.
SHOWER GLASS VOSS shower glass is generally 40mm shorter than stated on the box (width only). Prior to STARTING your tiled shower base check the exact glass size or contact your merchant if unsure. Do not start any tiling or screeding prior to checking exact glass size.
BATH TUBS Bath overflows and connections must be checked prior to installation as incorrect handling of the product may cause some connections to come loose. No abrasive cleaners to be used on these products. The skirt of the bath must not be touching the floor and all legs must have contact with the floor or warranties are void. All items accepted for return pursuant to the terms contained in the above text, shall incur a 20% restocking fee and no refund shall be given for deliveries. All deliveries are door to door, one man only deliveries. If the driver chooses to help you to bring the product into your house the risk of breakage and/or damage to property or product is yours. We will not be held liable for any damage to product on property from that occurs from the point of the door onwards. If you would like 2 man delivery please talk to the merchant as this is available minimum 72 hours notice and minimum fee of $180 plus GST as we use 3rd party couriers to do this.
DISTRIBUTION CENTRES
SYDNEY AUCKLAND MELBOURNE WELLINGTON CHRISTCHURCH
HEAD OFFICES New Zea l and VO S S Ltd 1 41 Kerrs Rd Wi ri , Au ckland
Aus tr ali a Bui ldi ng Gro up Pty Ltd 4 5 a Me tro li nk Ci rc ui t We s t Camp b e llf i e ld V I C 30 61
P. 09 266 2 667 E. s a l es@ voss. co. nz
P. 0 3 93 5 7 81 4 9 E . s ale s @ b ui ldi nggro up .co m.au
voss.co.nz
VOSS is a subsidiary of Falcon Building Solutions LTD co-operating with Building Group PTY Ltd