We sew a dress Burda 2/2013 153 - a lot of photos
From the top I say - I do not have a tailor education. Dress is sewn on my mind, so to speak. The following course are links to some useful tutorials in this course.
Generally version where I go - means dresses - add up and can walk in it.
First redraw the blank material. Elements 1, 2, 7, 8, cut so that when you are right-side up to look like the image below.
Other elements are symmetrical so and so are two, so there is no problem with their cutting. I lined neck for the whole dress, also part of the skirt.
This large piece - Part 1 marked in Burda in the corners notches naprasowywujemy interlining.
We start from stitching pleat. We do it everywhere at once, we mean every stitch and tuck rozprasowujemy. So stocks pleat arrange to always arranged as if on the outside. If you redraw the exact length of the pleat then at the end needle sticks across the then very nicely visible when sewing where the tuck is no end and will most likely come out darts equal. If we want, we can then check whether the tape is all about. But from my personal experience niekrawieckiego that if you activate the exact shape and depth and length of the darts and so denote the pin to come out equal.
The next step is the sewing section of lining up or elements 9, 10, 4. Here we have two stapled 9 and 10.
Here, all 5 parts.
Then we sew part 8 and 7. necks red thread, but throw the white edges that can better be seen.
Then we put the notebook part of the inner lining 8 and 7 right side to the left side of the part 1.
We sew along the shore at which point the second sew from beginning to end. Part 1 on the element must be tensioned to be able to piece together, because it is this section slightly longer.
So we sew the red line on both pieces to this line.
We sew to the end, that is, to the red dot.
Then we become part of the neck. And as spina marked and sew.
Now we proceed to the next steps on the bar area. Namely sew together short sections marked on the diagram.
Notched ends of the suture at the corners.
Then we move sewn strap. First, we sew the parts of the skirt. I sew in two stages. I am not the momentum gave the banks of the material on the bar and its surroundings, but I recommend to do it now - much to facilitate any work on przyszywaniu belt.
Here, part of the green.
Here red. Therefore, in two stages we sew because we are in the middle of what zszywaliśmy in the previous step, and if we sewed a stitch we would pierced, and they ground the tab.
Here we have sewn one side of the strip.
We fold part of the torso on the part of the skirt to sew the other side of the belt.
Pinning, so as not to grasp what I keep a hand that is part of the 8, then hand stitched. You can recognize the time but you will need to cut this środeczku at point 3.
This element also sewn in two stages for the same reasons as above.
It will fragment to which the machine will not get, and I can not pierce it differently than in the hands. This highlighted in red.
And we have such a hole that allows us to arrange this properly then all the tabs. We will deal with this at the try and the przyszywaniu bows.
Now we sew strap enough.
When wszywaniu bar, notice or darts at the top and bottom of the dress is covered well.
Pelt edges. But here's the thing, because either obrzucimy two stocks suture together - means the bar one and the other part of the top or skirt and fabric top zaprasujemy it on the bar lined up on the part of the torso or each separately pink stock obrzucimy and rozłoşymy one up second down both the upper and lining fabric - so it's recommend you do, because then zasuwak better sewn, better it opens and closes because there are no lumps on the fabric resulting from several layers of material. this is important also for sewing side seams.
After doszyciu strips check if you are sure the width is the same everywhere.
Here I threw together supply seamless - I'm faster when taking this course. You decide for how you will. I wore supply seamless belt.
We sew side seams. So we sew part of the back to the front.
Part of the blue-red light needs to stretch nicely everything spasowało - recommendations Burda.
We check how well we zszyły part. (Not ironed seam)
And now we spina together part 1 and 8 along podkroju armpits. Generally, we have these elements already in some places sewn so there will be problems and doubts about what.
Now we come to the tabs on the shoulders. First right shoulder.
Fold along the line marked above. Inventories - These pieces of material that are outside of these lines will cover up.
Now it's time for the left arm.
The dash is marked with an arrow marked on the diagram. Along this line will consist of material. Other dashes to select the bookmark you now I do. I mean we make here simply bookmark.
The line bending. (Jw)
Zakładeczka complex.
Now we file again along the marked lines on the diagram below.
So we assume / we bend along these lines that the material hide to call it back, which is overlaid on the underside of the material.
Now see if the length of the suture arm was established after the deposit of material on the fronts corresponds to the length of the shoulder seam at the back.
How can we agree to stitch shoulder seams right and left.
Now we come to completing the lining. Sew strap to the upper front and upper back, and just as we do with the lower parts of the dresses.
Who wishes can do quilting bar. By this, I did not have the appropriate thread stitching - roughly - better looking lockstitch, I sewed stitch the triple. 5.
Now it's time to buckle sewn on the back.
About wszywaniu locks wrote here . And here. And even here.
:)
We stitch cut under the castle.
It changed footer on półstopkę - then we lock seam closer and better.
Now we go to podkroju armpits.
First, the left armpit. We put on a part of the outer lining at shoulder seam right sides together.
Spina along podkroju armpits. We have three layers on the front - because we combine the elements 1, 8 and 10.
Just a stitch, pelt or whatever you want to finish up
Move to the right armpit. We put this together and lining the top as it would have when walking in a dress, left side to left. We cover stitching on the shoulder lining and top.
We keep myself so I keep fingers and bend back the top as shown below.
We grab for the supply of seamless and so upset the material to get to the left side.
I spin around the armpits, so controlling the material to be on the left.
We sew.
Upset top dresses on top of a lining or arrange as it should be, I mean inside. We underarm done.
Now we Sew lining to zipper band.
I do it so that first put the material left side to left - means top and lining. Then the supply of seamless tucked into the center.
I turned over so the material is still holding the stock of the seam to upset the left side of this business.
We sew from the top to the point where the zipper ends.
Now we do podkroju seam on the neck from behind - from the buckle to the shoulder seam.
Lock wrap the tape so that it lay on the lining.
I prepared one side of the lining. The other side of the back doing the same.
Here, too, once wrote about finishing the neckline. Now bow. The provision in Burda is made from tape rep. I do the same fabric as a belt. Do as you want !! The most important to you fit.
Everting the right.
I bow this time covered the entire stitching. But only when sewing I realized that not counted myself the entire width of the belt and that to be spacing stębnówkami .... but it came out not too bad and still bow will be complex.
Bow apparently fatal - to improve - here for this course left it so.
Front neckline sewed by hand - a lining to the top.
I definitely need to improve quilted - so this is when a man is in a hurry ... but I really wanted to finish this course, because it stretched me here unimaginable. No need to dress down and tuck and finish eg so
machine .
manually or by