All works shown here are designed and visualised by myself
www.velichkovelikov.com
velichko velikov portfolio - 2011 www.velikov-design.com
MODELS
www.velichkovelikov.com
velichko velikov - portfolio - 2014
SKETCHES - 2008 / 2009
www.velichkovelikov.com
velichko velikov - portfolio - 2014
SKETCHES - 2008 / 2009
www.velichkovelikov.com
velichko velikov - portfolio - 2014
Lastika chair for LAGO (Italy) - 2011 LASTIKA is a simple chair with metal tubular frame and 40 elastic belts. It was presented at Milan Design Week and Salone Mobile Milan 2011. Lastika resembles a flower, in fact a daisy. When you sit in it, you are supported by forty elastics that make up the seat and create a rocking sensation, although the structure of the seat is in fact very stable. It is a fun and comfortable seat, very lightweight and ‌ stackable! Photos by Kassel&Wassel
www.velichkovelikov.com
velichko velikov - portfolio - 2014
Curly chair for LAGO (Italy) - 2011 Curly is a chair that takes advantage of the resistance of fabric for its seat. The frame is reduced, there are neither arms nor a back rest and the weight of the body is supported by its extremely resistant fabric. The canvas version is perfect for outdoor use. The chair was presented during a Milan Design Week and Salone Mobile Milan 2011. Photos by Kassel&Wassel
www.velichkovelikov.com
velichko velikov - portfolio - 2014
Torro chair for GS MEBEL (Bulgaria) - 2012 Torro is a stackable chair designed with simplicity and low cost production in mind. The construction is made of 16mm steel tube and weaving or upholstery. The chair is suitable for interior and exterior use - the weaving is waterproof. Fully upholstered version is on its way, i am also working of highly comfortable version with polyurethane foam and upholstery.
www.velichkovelikov.com
velichko velikov - portfolio - 2014
FLEXY - exterior glowing furniture for Rotoinvent (Bulgaria) - 2011 Flexy is a two module furniture set for exteriors – beach, hotels, pubilc spaces, special events, etc. The set consist of two modules – one cylinder and an arc. This allows very flexyble (Flexy!) configurations. The same shape is used also for bar construction, but the height is 1100mm and 1300mm. The seating height is 400mm and 600mm for the cylinders. One arc module is big enough to alow four people top seat on it.
www.velichkovelikov.com
velichko velikov - portfolio - 2014
FLEXY - exterior glowing furniture for Rotoinvent (Bulgaria) - 2011
www.velichkovelikov.com
velichko velikov - portfolio - 2014
Banana - multifunctional chair/bench/rocker for Rotoinvent (Bulgaria) - 2012 Banana is a polyethylene/polypropylene bar chair, which when needed can be used as a bench or a rocking chair. Suitable for both interior and exterior use.
www.velichkovelikov.com
velichko velikov - portfolio - 2014
PUZZLE - One module shelf system for Rotoinvent (Bulgaria) - 2012
www.velichkovelikov.com
velichko velikov - portfolio - 2014
VIOLA chair - dining chair for Osidea (China) - 2013
Viola is designed to be produced in 3d veneer technology. The prototype is made in fiberglass to allow testing of the ergonomics and strength of the structure. Under development.
www.velichkovelikov.com
velichko velikov - portfolio - 2014
CIRCLES candle holder - 2011
Laser cut steel - powder coated or stainless steel candle holder with simple design. Made with tea candles in mind but it is possible to be used with other type of candles – you just need to bend the pins on the base of the candles.
www.velichkovelikov.com
velichko velikov - portfolio - 2014
BIRDS wall coat hanger - 2011
Laser cut 2mm steel - powder coated or stainless steel candle holder with simple design. The BIRDS coat hanger is meant to be wall attached and to give strong graphic appearance to the place. Possible to be used with lighting behind for stronger effect. Shown at The World of Furniture - Sofia, Bulgaria, 2011
www.velichkovelikov.com
velichko velikov - portfolio - 2014
TULIP - Thermo vases set for Rotoinvent (Bulgaria) - 2014
Viola is designed to be produced in 3d veneer technology. The prototype is made in fiberglass to allow testing of the ergonomics and strength of the structure. Under development.
www.velichkovelikov.com
velichko velikov - portfolio - 2014
JENNY - Electronic medical device for MSW (Germany) - 2013
Jenny is a medical device used to monitor the patients condition, different data etc. The main purpose was to design a sleek and smooth contemporary product with a feeling of luxury and to avoid any connection with the standard look and colours of a medical devise. Under development phase.
www.velichkovelikov.com
velichko velikov - portfolio - 2014
Server case for SecureLoqic (UK) - 2014
The brief was to develop a server case 1U and 2U size with unique and sleek look in the same time to have in mind the air flow going through the case. Under production phase.
www.velichkovelikov.com
velichko velikov - portfolio - 2014
Various projects for Unique Automation (UK) - 2011-2013 Design and visualisation of various projects utilising the company patented touch technology. In production.
www.velichkovelikov.com
velichko velikov - portfolio - 2014
FRAME - the chair with changeable seats - 2011
FRAME is a chair with simple metal wire (steel) 12mm frame, powder coated or chrome finish. The main idea behind it is to have one frame and to use different shaped seats to achieve totally different vision and terms of use. Very comfortable and lightweight, the chair can be used inside, outside for cafe’s restaurants, public spaces or at home.
www.velichkovelikov.com
velichko velikov - portfolio - 2014
THE CUBBA-BUBBA 5 IN 1 CHAIR AND TABLE - concept stage - 2008
INFORMATION Material: Polyethylene or polyurethane rubber Finish: Gloss and matt Colors: Multicolored
www.velichkovelikov.com
It all started as a fun project for multi functional liquid measure tool. I tried to help a friend with his project and it came as an object which allows the staff in the bars and restaurants to use one tool for all different measures when serve liquids to the customers. After a while, when I was looking at my old sketches, I figure out that there’s more that this - so the chair came out from that old doodles. Firstly, I was happy to get three chairs from the cube, but after that I saw that it can be improved and I did 5 chairs and a table in one. So, as you can see - we have one object which offers 4 different seating positions (five chairs) plus a table in one cube with dimensions 90X90X75 cm. The chair can be used around the pools, beach, garden and at home as well. I did a prototype in fiber glass, but I think the final product should be made in polyethylene. I am working on smaller version for kids at the moment - it can be used at public spaces, fun places, kids zones etc. It should be done in foam rubber or similar materials in terms of safety.
velichko velikov - portfolio - 2014
THE CUBBA-BUBBA 5 IN 1 CHAIR AND TABLE - final prototype - 2009
The prototype was shown at 100% design London 2009 in 100% Futures.
www.velichkovelikov.com
velichko velikov - portfolio - 2014
THE ZIG-ZAG CHAIR - concept stage - 2008 INFORMATION Material: Metal wire 6 and 12 mm Finish: Powder coat or Chromium Colors: Multicolored
www.velichkovelikov.com
velichko velikov - portfolio - 2014
THE ZIG-ZAG CHAIR - prototype - 2009
The prototype was shown at 100% design London 2009 in 100% Futures.
www.velichkovelikov.com
velichko velikov - portfolio - 2014
X-ONE- concept stage - 2008
INFORMATION Material: Metal wire 12 mm and plywood for the seat Finish: Powder coat or Chromium, polyurethane for the seat Colors: Multicolored
www.velichkovelikov.com
velichko velikov - portfolio - 2014
X-ONE- prototype - 2009 The prototype was shown at 100% design London 2009 in 100% Futures.
www.velichkovelikov.com
velichko velikov - portfolio - 2014
SWIRL TABLE - concept & prototype - 2010 INFORMATION Material: Only one detail - Metal wire bended in 2d curve with a glass top Finish: powder coat or chromium for the metal Colors: Multicolored The prototype was shown at 100% design London 2010 @ 100% Futures.
www.velichkovelikov.com
velichko velikov - portfolio - 2014
THE ARC TABLE - concept & prototype - 2010
INFORMATION Material: Wood or steel tubes. The table is made from only one detail. Finish: Matt finish for the wood Colors: Multicolored The prototype was shown at 100% design London 2010 and at Maison&Objet Paris 2010
www.velichkovelikov.com
velichko velikov - portfolio - 2014
THE SPRING TABLE - concept & prototype - 2010 INFORMATION Material: Wood + glass top Finish: Gloss or matt Colors: Multicolored The prototype was presented at 100% design London 2010 @ 100% Futures and at Maison&Objet Paris 2010
www.velikov-design.com
www.velichkovelikov.com
velichko velikov - portfolio - 2014
THE CROSS TABLE - concept & prototype - 2010
INFORMATION Material: Wood+glass top. Only one detail Finish: Gloss or matt Colors: Multicolored The prototype was presented at 100% design London 2010 @ 100% Futures and at Sofia Design Week 2011
www.velichkovelikov.com
velichko velikov - portfolio - 2014
THE PEACOCK PENCIL HOLDER - concept & prototype - 2011
INFORMATION Material: Wood or MDF Finish: Gloss or matt Colors: Natural The product was presented at Sofia Design Week 2011
www.velichkovelikov.com
velichko velikov - portfolio - 2014
THE HEDGEHOG PENCIL HOLDER - concept & prototype - 2011
INFORMATION Material: Wood or MDF Finish: Gloss or matt Colors: Natural The product was presented at Sofia Design Week 2011
www.velichkovelikov.com
velichko velikov - portfolio - 2014
BALLOON chair - concept - 2011
Comfortable and cosy. The Balloon lounge chair is a part of a set of a chair, lounge chair and a stool resembling a bunch of baloons with their shadows underneath. Material: Steel wire 10mm and 6mm, poluyrethane foam and upholstery. Suitable for indoor and outdoor use Under prototyping phase
www.velichkovelikov.com
velichko velikov - portfolio - 2014
THE COMBO CHAIR - concept - 2011
INFORMATION Material: Plywood, metal, wood Finish: Gloss or matt Colors: Multicolored
www.velichkovelikov.com
velichko velikov - portfolio - 2014
PLANE LOUNGE - concept - 2009
INFORMATION Material: Fiber glass or acrylic in two colors. Finish: Gloss or matt Colors: Multicolored
www.velichkovelikov.com
velichko velikov - portfolio - 2014
LEKO set - concept - 2008 / 2009 INFORMATION Material: Different materials used - carbon fiber, upholstery, plastic weave for the exterior version. Finish: Random Colors: Multicolored Prototype is under development
www.velichkovelikov.com
velichko velikov - portfolio - 2014
ELAXA CHAIR - concept - 2010
INFORMATION Material: Bended wood and metal/Acrylic Finish: Mat and Chromium fro the seat Colors: Natural Currently under development - this chair won the Best chair competition at Imagine Outlet and is under development for production.
www.velichkovelikov.com
velichko velikov - portfolio - 2014
RING LOUNGE CHAIR - concept - 2010
INFORMATION Material: Fiber glass or acrylic in two colors. Upholstery in leather or cloth Finish: Gloss Colors: Multicolored
www.velichkovelikov.com
velichko velikov - portfolio - 2014
Z - CHAIR - concept - 2010 INFORMATION Material: Fiber glass or acrylic in two colors. Finish: Gloss Colors: Multicolored
www.velichkovelikov.com
velichko velikov - portfolio - 2014
RING CHAIR - concept - 2010
INFORMATION Material: Fiber glass or acrylic in two colors. Finish: Gloss Colors: Multicolored
www.velichkovelikov.com
velichko velikov - portfolio - 2014
WAVE CHAIR AND TABLE SET - concept - 2010
INFORMATION Material: Fiber glass or acrylic, glass for the table top Finish: Gloss or matt Colors: Multicolored
www.velichkovelikov.com
velichko velikov - portfolio - 2014
CERAMIC MODULAR DESIGNS - concept - 2008 / 2009
INFORMATION Material: Ceramics or porcelain Finish: Gloss or matt Colors: Multicolored
www.velichkovelikov.com
velichko velikov - portfolio - 2014
BEER GLASS DESIGN - concept - 2009
INFORMATION Material: Glass Finish: Gloss Colors: Clear glass The whole project I did in SolidWorks and the visualization in 3d Studio Max
www.velichkovelikov.com
velichko velikov - portfolio - 2014
PIRAMIDE CHAIR - concept - 2010
INFORMATION Material: Wooden frame and leather or cloth upholstery Finish: Matt finish for the wood Colors: Multicolored
www.velichkovelikov.com
velichko velikov - portfolio - 2014
FREELINE CHAIR - concept - 2010 INFORMATION Material: Plywood for the back, seat and legs. Cushions for the seat and the back. Finish: gloss or matt Colors: Multicolored
www.velichkovelikov.com
velichko velikov - portfolio - 2014
HALF-MOON CHAIR - concept - 2010 INFORMATION Material: Plywood. Cushions for the seat and the back. Finish: gloss or matt Colors: Multicolored
www.velichkovelikov.com
velichko velikov - portfolio - 2014
FREELINE CHAIR - concept - 2010 INFORMATION Material: Plywood for the back, seat and legs. Cushions for the seat and the back. Finish: gloss or matt Colors: Multicolored
www.velichkovelikov.com
velichko velikov - portfolio - 2014
THE KISS CHAIR - concept - 2010 INFORMATION Material: Fiberglass and upholstery. Finish: gloss or matt Colors: Multicolored
www.velichkovelikov.com
velichko velikov - portfolio - 2014
RANDOM PROJECTS - concepts - 2004 / 2009
www.velichkovelikov.com
velichko velikov - portfolio - 2014
RANDOM PROJECTS - concepts - 2003 / 2010
www.velichkovelikov.com
velichko velikov - portfolio - 2014
www.velichkovelikov.com
velichko velikov - 2011 All works shown here are designed and visualised by myself
www.velikov-design.com