We have extensive experience in designing new buildings and evaluating, repairing, expanding, and renovating existing structures.
Our portfolio includes thousands of projects across all 50 states and several countries abroad. Additional capabilities include cost estimating, systems evaluation and construction administration.
planning
Structural Systems Evaluation
Preliminary Structural Design
Structural Prototype Design
Material and Cost Estimating
Feasibility Studies
Value Engineering
Coastal High Velocity Hurricane
Zone Design
Coastal Wind Borne Debris
Wind Region Design
Solar Panel Load Analysis
Building Information Modeling (BIM)
construction
Steel Detailing
Stair Detailing
Preparation of Shop Drawings
Construction Administration
Structural Observations & Reports
IBC-mandated Special
Inspections
design
Structural Design and Analysis
Cast-in-Place Concrete
Precast and Post-Tensioned
Concrete
Glass Railing Design
Tilt-Up Concrete
Structural Steel
Reinforced CMU
Residential Wood Framing
Heavy and Mass Timber
Panelized Wood
Pre-Engineered Building
Systems
Cold-Formed Steel
Curtain Wall and Specialty
Skin Systems
Art Installations
Foundations and Retaining
Walls
Storm Shelter & Safe Room
Design
Foundation Design
Auger Cast Piles
Concrete Piles
Helical Piers
Mat Foundations
Retaining Walls
Soil Improvement Methods
Steel Piles
Tangent Pier Retention
Timber Piles
Tower Crane and Vertical Lift
System Foundations
Peer Review
investigation
Evaluation and Rehabilitation
Failure Analysis
Strengthening of Existing
Structures
Prepurchase Reports
Disaster Response
Engineering Litigation
Roofing Inspections
other services
Adaptive Reuse
Historic Preservation
We have designed projects throughout all 50 states, Mexico, Puerto Rico and U.S. Virgin Islands, giving us in-depth knowledge of all model building codes, as well as experience with local codes and jurisdictions.
Concrete is one of the most commonly used materials in construction for its durability, availability, resistance to fire and water, and cost. Reinforced concrete can be cast into a variety of structural elements including footings, slabs, beams and columns. Wallace Design Collective has experience with cast-in-place and precast concrete structures.
Steel can take a structure to new heights. With its tensile strength, structural steel members have a high strengthto-weight ratio compared to other building materials. It’s easily fabricated and can be made into any shape, increasing the overall efficiency of the design and construction process. Wallace has experience in the design of a variety of structural steel facilities.
Wood construction is often a preferred structural system for many low-rise and mid-rise buildings. It’s a costeffective and efficient material that is readily available.
Wallace has extensive experience in the design of wood-framed structures located across the United States. Our experience includes light framing, heavy and glue-laminated timber, panelized systems, hybrid woodsteel framing and large roof diaphragms.
Cold-formed steel framing is lightweight, extremely strong, noncombustible and easy to install. It doesn’t shrink or absorb moisture and resists warping, termites and fire. Our experience includes the full design and detailing of the cold-formed steel system, design calculations and shop drawing production for cold-formed steel suppliers. Our knowledge of loadbearing and non-loadbearing cold-formed steel systems comes from our experience as both the engineer-of-record and as specialty designers.
Wallace has provided structural engineering services for numerous facade systems on iconic structures located around the world. Our team brings structural efficiency to the system and an understanding of the materials which can reduce costs.
We have also provided early design assistance when projects are in the planning stages, where we can study different materials and support methods, as well as the cost impact of multiple options.
We’re ready to listen to what you need and help shape what you want. Let’s get started.
brad thurman, pe, fsmps, cpsm, principal chief marketing officer
800.364.5858 • brad.thurman@wallace.design
jana j. monforte, associate business development and marketing manager
800.364.5858 • jana.monforte@wallace.design