WE-EF LIGHTING North American Edition 2014-2016 Bollards and Pathway Luminaires
GTX200 Series
XRX300 Series
GTY200 Series
GRY200 Series
XRZ300 Series
XRY300 Series
142-143
144-145
146-147
148-149
150-151
152-153
GTX224
XRX324
GTY224
GRY224
XRZ324
XRY324
GRX224
XRX334
GTY234
GRY234
XRZ334
XRY334
CF
CF
CF
CF
CF
CF
HID
HID
HID
HID
HID
GRX200 Series
140
BOLLARDS AND PATHWAY LUMINAIRES
ZTY600 Series
CTY100 Series
NTY100 Series
ALY300 Series
QSO200 Series
QSI200 Series
TSI200 Series
CRY100 Series
154-155
158-159
162-163
164-165
166-167
168-169
170-171
ZTY630
CTY150
NTY184
ALY350
QSO229
QSI254
TSI254
LED
CRY150
HID
LED
LED
LED
LED
LED 156-157 ZTY630
160-161
HID
CTY150 CRY150 CF HID
141
GTX200/GRX200 SERIES Border light. IP55. Marine-grade, die-cast aluminum alloy. 5CE superior corrosion protection including PCS hardware. Powdercoat finish in black RAL 9004, grey metallic RAL 9007 or white RAL 9016. Specify finish. Consult WE-EF color chart for other options. Prismatic polycarbonate lens. Silicone rubber gasket. Suitable for installation in landscaped areas, concrete foundations or piers.
Light source: CFM 13-18 W Beam distribution: Shielded UL, cUL: n
Luminaire mounts over a standard 4" recessed junction box, or over single conduit stub. Conduit stub cannot extend above grade. Not suitable for feed-through wiring. Integral [ECG] electronic CF ballast in 120 or 277 volt. Specify voltage.
Liverpool Hope University. Liverpool (UK). Landscape architects: BCA Landscape. Lighting design: Light Angel Design.
142
Suitable for wet locations
Ordering guide: Specify 7 digit part ID together with voltage and finish. Example: 637-2130 – 120 V – Black RAL 9004
GTX224
GRX224
ø 6.30
Shielded
Part ID
Light source
lm
Factor*
lbs
GTX224
637-2130
CFM13/GX24q-1 base
900
1.00
5.0
637-2131
CFM18/GX24q-2 base
1200
1.33
5.0
Shielded
Part ID
Light source
lm
Factor*
lbs
GRX224
637-1130
CFM13/GX24q-1 base
900
1.00
5.0
637-1131
CFM18/GX24q-2 base
1200
1.33
5.0
0.91 ø 0.26
2.64 ø 4.72
0,01 fc
4,5
0,03
ø 6.30
0,09
3
ft
9.45
H: 0,75 ft
6
1,5
GTX224
0,5 5,9 1,5
3
4,5
6
Shielded
9.45
GRX224
0.91 ø 0.26
* Multiplier for footcandle value.
2.64 ø 4.72
143
XRX300 SERIES Beacon luminaire. IP55. Marine-grade, die-cast aluminum alloy. 5CE superior corrosion protection including PCS hardware. Powdercoat finish in black RAL 9004, grey metallic
Light source: CFM 18-42 W CMH 70 W
RAL 9007 or white RAL 9016. Specify finish. Consult WE-EF color chart for other options. Silicone rubber gasket. Suitable for installation on concrete foundations or piers.
Beam distribution: Diffused
XRX324: Prismatic polycarbonate lens.
UL, cUL:
XRX334: Prismatic borosilicate glass lens.
n
Luminaire mounts over a standard 4" recessed junction box, or over single conduit stub. Integral [ECG] electronic CF ballast in 120 or 277 volt. Integral [ECG] electronic CMH ballast in 120, 277 or 347 volt. Specify voltage where applicable.
144
Suitable for wet locations
Ordering guide: Specify 7 digit part ID together with voltage and finish. Example: 632-3131 – 120 V – Black RAL 9004
ø 7.09
Diffused
Part ID
Light source
lm
Factor*
lbs
XRX324
632-3131
CFM18/GX24q-2 base
1200
1.00
9.0
XRX334
632-3233
CFM42/GX24q-4 base
3200
1.00
19.0
632-3242
CMH70/ED17 coated/medium base
5800
1.81
19.0
H: 0,5 ft
12
0,01 fc
9
0,02
3 ft
0,2
3
3
6
9
12
Diffused – XRX324
ft
ø 0.24
0,1 0,6 2,3 3
6
9
ø 10.63
12
Diffused – XRX334 XRX334
ø 0.24
* Multiplier for footcandle value.
ø 3.94 ø 7.09
0,2
6
1,0
9.45
0,04 fc
9
0,05
6
H: 0,82 ft
12
XRX324
14.17
ø 7.09 ø 10.63
145
GTY200 SERIES Bollard. IP55. Marine-grade, die-cast aluminum alloy. 5CE superior corrosion protection including PCS hardware. Powdercoat finish in black RAL 9004, grey metallic RAL 9007
Light source: CFM 18-42 W CMH 70 W
or white RAL 9016. Specify finish. Consult WE-EF color chart for other options. Silicone rubber gasket. Suitable for installation in landscaped areas or on concrete foundations.
Beam distribution: Shielded
GTY224: Prismatic polycarbonate lens.
Accessories:
GTY234: Prismatic borosilicate glass lens.
n
Integral [ECG] electronic CF or CMH ballast in 120, 277 or 347 volt. Specify voltage.
Strandhotel D端nenmeer. Ostseebad Dierhagen (D).
146
Mounting, page 147
UL, cUL: n
Suitable for wet locations
Ordering guide: Specify 7 digit part ID together with voltage and finish. Example: 637-4130 – 120 V – Black RAL 9004
ø 6.30
Shielded
Part ID
Light source
lm
Factor*
lbs
GTY224
637-4130
CFM18/GX24q-2 base
1200
1.00
11.0
637-4131
CFM26/GX24q-3 base
1800
1.50
11.0
637-4230
CFM32/GX24q-3 base
2400
1.00
22.0
637-4231
CFM42/GX24q-4 base
3200
1.33
22.0
637-4241
CMH70/ED17 coated/medium base
5800
2.42
22.0
GTY234
H: 2,0 ft
10
0,01 fc
7,5 5 2,5 ft
3
3,8 2,5
5
0,03 fc 0,09
7,5
10
Shielded – GTY224
ft
ø 5.12 ø 6.30
0.35
0,3
6
0,5
27.56
H: 2,75 ft
12 9
0,04 0,1
GTY224
1,1 5,8 3
6
9
12
ø 9.84
Shielded – GTY234
GTY234 39.37
Accessories: Planted root ESV4 – Galvanized steel.
lbs
for GTY224
665-9302
10.0
for GTY234
697-8010
13.0
Direct burial support for installing bollards in landscaped areas. 9
ø 7.95 ø 9.06
13.78 15.75
Planted root ESV4
* Multiplier for footcandle value.
147
GRY200 SERIES Bollard. IP55. Marine-grade, die-cast aluminum alloy. 5CE superior corrosion protection including PCS hardware. Powdercoat finish in black RAL 9004, grey metallic RAL 9007
Light source: CFM 18-42 W CMH 70 W
or white RAL 9016. Specify finish. Consult WE-EF color chart for other options. Silicone rubber gasket. Suitable for installation in landscaped areas or on concrete foundations.
Beam distribution: Shielded
GRY224: Prismatic polycarbonate lens.
Accessories:
GRY234: Prismatic borosilicate glass lens.
n
Integral [ECG] electronic CF or CMH ballast in 120, 277 or 347 volt. Specify voltage.
River Park. Chachoengsao (TH).
148
Mounting, page 149
UL, cUL: n
Suitable for wet locations
Ordering guide: Specify 7 digit part ID together with voltage and finish. Example: 637-3130 – 120 V – Black RAL 9004
ø 6.30
Shielded
Part ID
Light source
lm
Factor*
lbs
GRY224
637-3130
CFM18/GX24q-2 base
1200
1.00
11.0
637-3131
CFM26/GX24q-3 base
1800
1.50
11.0
637-3230
CFM32/GX24q-3 base
2400
1.00
22.0
637-3231
CFM42/GX24q-4 base
3200
1.33
22.0
637-3241
CMH70/ED17 coated/medium base
5800
2.42
22.0
GRY234
H: 2,0 ft
10
0,01 fc
7,5 5 2,5 ft
3
3,8 2,5
5
0,03 fc 0,09
7,5
10
Shielded – GRY224
ft
ø 5.12 ø 6.30
0.35
0,3
6
0,5
27.56
H: 2,75 ft
12 9
0,04 0,1
GRY224
1,1 5,8 3
6
9
12
ø 9.84
Shielded – GRY234
GRY234 39.37
Accessories: Planted root ESV4 – Galvanized steel.
lbs
for GRY224
665-9302
10.0
for GRY234
697-8010
13.0
Direct burial support for installing bollards in landscaped areas. 9
ø 7.95 ø 9.06
13.78 15.75
Planted root ESV4
* Multiplier for footcandle value.
149
XRZ300 SERIES Bollard. IP55. Marine-grade, die-cast aluminum alloy. Impregnated mahogany hardwood post. 5CE superior corrosion protection including PCS hardware. Powdercoat finish in
Light source: CFM 18-42 W CMH 70 W
black RAL 9004, grey metallic RAL 9007 or white RAL 9016. Specify finish. Consult WE-EF color chart for other options. Silicone rubber gasket. Suitable for installation in land-
Beam distribution: Diffused
scaped areas or on concrete foundations. Accessories:
XRZ324: Prismatic polycarbonate lens. XRZ334: Prismatic borosilicate glass lens.
n
UL, cUL: n
Integral [ECG] electronic CF or CMH ballast in 120, 277 or 347 volt. Specify voltage. Wood is a natural material and therefore susceptible to higher color and texture variations. Natural aging is part of the product. Use transparent, mild UV-resistant and waterrepellent wood stain approximately every 12 months.
150
Mounting, page 151
Suitable for wet locations
Ordering guide: Specify 7 digit part ID together with voltage and finish. Example: 641-5136 – 120 V – Black RAL 9004
ø 7.09
Diffused
Part ID
Light source
lm
Factor*
lbs
XRZ324
641-5136
CFM18/GX24q-2 base
1200
1.00
25.0
XRZ334
641-5236
CFM42/GX24q-4 base
3200
1.00
66.0
641-5246
CMH70/ED17 coated/medium base
5800
1.81
66.0
H: 2,6 ft
12
0,04 fc
9 0,09
6 3 ft
3
0,1 3
6
0,1 fc 0,14 0,15
6
0,1
9
12
ft
Diffused – XRZ324
35.43
H: 3,3 ft
12 9
0,06
XRZ324
0,2 0,2 3
6
9
12
0.35
Diffused – XRZ334
ø 7.95 ø 9.06
ø 10.63
XRZ334 Accessories: Planted root ESV4 – Galvanized steel.
lbs
for XRZ324
697-8010
13.0
for XRZ334
697-9301
16.0
43.31
Direct burial support for installing bollards in landscaped areas.
13.78 15.75
0.35
ø 11.26 ø 12.60
Planted root ESV4
* Multiplier for footcandle value.
151
XRY300 SERIES Bollard. IP55. Marine-grade, die-cast aluminum alloy. 5CE superior corrosion protection including PCS hardware. Powdercoat finish in black RAL 9004, grey metallic RAL 9007
Light source: CFM 26-42 W CMH 70 W
or white RAL 9016. Specify finish. Consult WE-EF color chart for other options. Silicone rubber gasket. Suitable for installation in landscaped areas or on concrete foundations.
Beam distribution: Diffused
XRY324: Prismatic polycarbonate lens.
Accessories:
XRY334: Prismatic borosilicate glass lens.
n
Integral [ECG] electronic CF or CMH ballast in 120, 277 or 347 volt. Specify voltage.
Siam Paragon Shopping Complex. Bangkok (TH). Architect: Wimberly Allison Tong and Goo/RTKL International. Lighting design: LPA.
152
Mounting, page 153
UL, cUL: n
Suitable for wet locations
Ordering guide: Specify 7 digit part ID together with voltage and finish. Example: 632-4132 – 120 V – Black RAL 9004
ø 7.09
Diffused
Part ID
Light source
lm
Factor*
lbs
XRY324
632-4132
CFM26/GX24q-3 base
1800
1.00
19.0
XRY334
632-4232
CFM42/GX24q-4 base
3200
1.00
36.0
632-4242
CMH70/ED17 coated/medium base
5800
1.81
37.0
H: 2,0 ft
12
0,05 fc
9 6 3 ft
0,2
3 6
0,1 fc 0,15 0,18
6
0,3 3
H: 3,0 ft
12 9
0,09 0,16
9
12
ft
Diffused – XRY324
27.56
XRY324
0,2
0.35
0,3 3
6
9
ø 7.95 ø 9.06
12
Diffused – XRY334 ø 10.63
XRY334 39.37
Accessories: Planted root ESV4 – Galvanized steel.
lbs
for XRY324
697-8010
10.0
for XRY334
697-9301
13.0
Direct burial support for installing bollards in landscaped areas. 0.35
ø 11.26 ø 12.60
13.78 15.75
Planted root ESV4
* Multiplier for footcandle value.
153
ZTY600 SERIES Bollard. IP55. Marine-grade, die-cast aluminum alloy. 5CE superior corrosion protection including PCS hardware. Powdercoat finish in black RAL 9004, grey metallic RAL 9007
Light source: LED 24-39 W 3000 K (for 4000 K, refer to www.we-ef.com)
or white RAL 9016. Specify finish. Consult WE-EF color chart for other options. Clear polycarbonate outer lens. Silicone rubber gasket. Suitable for installation in landscaped
Beam distribution: [C60]
areas or on concrete foundations. Accessories:
PMMA FT 360째 LED lens. Integral [ECG] LED driver in 120 or 277 volt. Specify voltage.
154
n
Mounting, page 155
UL, cUL: n
Suitable for wet locations
IOS Innovative Optical System: [C60] Controlled distribution, symmetric
Ordering guide: Specify 7 digit part ID together with voltage and finish. Example: 638-5323 – 120 V – Black RAL 9004
ø 18.11
[C60]
Part ID
Light source
K
lm*
ZTY630
638-5323
LED-FT 24W
3000
2000
1.00
34.0
638-5325
LED-FT 39W
3000
3000
1.50
34.0
0,01 fc
15
0,03
49.21
0,1
10
ft
lbs
H: 3,0 ft
20
5
Factor**
0,4 4,0 5
10
15
20
[C60]
0.39
ø 9.84 ø 11.42
Accessories: Planted root ESV4 – Galvanized steel. for ZTY630
697-8011
lbs 14.0
Direct burial support for installing bollards in landscaped areas.
13.78 15.75
Planted root ESV4
* Nominal lumen output based on LED manufacturers data at 25°C Tc. For rated lumens at 25°C Tq and latest data, refer to www.we-ef.com. ** Multiplier for footcandle value.
155
ZTY600 SERIES Bollard. IP55. Marine-grade, die-cast aluminum alloy. 5CE superior corrosion protection including PCS hardware. Powdercoat finish in black RAL 9004, grey metallic RAL 9007
Light source: CFM 32-42 W CMH 70 W
or white RAL 9016. Specify finish. Consult WE-EF color chart for other options. Clear polycarbonate lens. Anodized aluminum reflector. Silicone rubber gasket. Suitable for
Beam distribution: Shielded
installation in landscaped areas or on concrete foundations. Accessories:
Integral [ECG] electronic CF or CMH ballast in 120, 277 or 347 volt. Specify voltage.
n
Mounting, page 157
UL, cUL: n
Senioren-Wohnanlage Wiesentrift. Schneverdingen (D). Architect: Renken + Szygula.
156
Suitable for wet locations
Ordering guide: Specify 7 digit part ID together with voltage and finish. Example: 638-5330 – 120 V – Black RAL 9004
ø 18.11
Shielded
Part ID
Light source
lm
Factor*
lbs
ZTY630
638-5330
CFM32/GX24q-3 base
2400
1.00
34.0
638-5331
CFM42/GX24q-4 base
3200
1.33
34.0
638-5341
CMH70/ED17 coated/medium base
5800
2.42
34.0
H: 3,0 ft
20 15
0,04 0,10
10 5 ft
49.21
0,02 fc
0,3 2,2 5
10
15
20
Shielded
0.39
ø 9.84 ø 11.42
Accessories: Planted root ESV4 – Galvanized steel. for ZTY630
697-8011
lbs 14.0
Direct burial support for installing bollards in landscaped areas.
13.78 15.75
Planted root ESV4
* Multiplier for footcandle value.
157
CTY100/CRY100 SERIES Bollard. IP55. Marine-grade, die-cast aluminum alloy. 5CE superior corrosion protection including PCS hardware. Powdercoat finish in black RAL 9004, grey metallic RAL 9007
Light source: LED 24-39 W, 3000 K (for 4000 K, refer to www.we-ef.com)
or white RAL 9016. Specify finish. Consult WE-EF color chart for other options. Clear polycarbonate outer lens. Silicone rubber gasket. Suitable for installation in landscaped
Beam distribution: [C60]
areas or on concrete foundations. Accessories:
PMMA FT 360째 LED lens. Integral [ECG] LED driver in 120 or 277 volt. Specify voltage.
Moorilla Winery. Tasmania (AUS). Architect: Craig Rosevear Architects + Jacob Allom Wade (JAWS Architects).
158
n
Mounting, page 159
UL, cUL: n
Suitable for wet locations
IOS Innovative Optical System: [C60] Controlled distribution, symmetric
CRY150 Ordering guide: Specify 7 digit part ID together with voltage and finish. Example: 638-3020 – 120 V – Black RAL 9004
ø 6.50
[C60]
Part ID
Light source
K
lm*
CTY150
638-3020
LED-FT 24W
3000
2000
Factor** 1.00
26.5
lbs
638-3022
LED-FT 39W
3000
3000
1.50
26.5
Part ID
Light source
K
lm*
638-1020
LED-FT 24W
3000
2000
1.00
26.5
638-1022
LED-FT 39W
3000
3000
1.50
26.5
CTY150 [C60] CRY150
39.37
0,01 fc
15
0,02 0,08
10
ft
lbs
H: 2,75 ft
20
5
Factor**
0,4
ø 6.50
3,6 5
10
15
CTY150
20
[C60]
CRY150 39.37
Accessories: Planted root ESV4 – Galvanized steel. for CTY150/CRY150
697-8010
lbs 13.0
Direct burial support for installing bollards in landscaped areas. 9
ø 7.95 ø 9.06
13.78 15.75
Planted root ESV4
* Nominal lumen output based on LED manufacturers data at 25°C Tc. For rated lumens at 25°C Tq and latest data, refer to www.we-ef.com. ** Multiplier for footcandle value.
159
CTY100/CRY100 SERIES Bollard. IP55. Marine-grade, die-cast aluminum alloy. 5CE superior corrosion protection including PCS hardware. Powdercoat finish in black RAL 9004, grey metallic RAL 9007
Light source: CFM 32-42 W CMH 70 W
or white RAL 9016. Specify finish. Consult WE-EF color chart for other options. Clear polycarbonate lens. Anodized aluminum reflector. Silicone rubber gasket. Suitable for
Beam distribution: Shielded
installation in landscaped areas or on concrete foundations. Accessories:
Integral [ECG] electronic CF or CMH ballast in 120, 277 or 347 volt. Specify voltage.
n
Mounting, page 161
UL, cUL: n
New England Quarter. Brighton (UK). Architect: David Huskinson Associates.
160
Suitable for wet locations
Ordering guide: Specify 7 digit part ID together with voltage and finish. Example: 638-3030 – 120 V – Black RAL 9004
CRY150
ø 6.50
Shielded
Part ID
Light source
CTY150
638-3030
CFM32/GX24q-3 base
lm
Factor*
lbs
2400
1.00
22.0
638-3031
CFM42/GX24q-4 base
3200
1.33
22.0
638-3041
CMH70/ED17 coated/medium base
5800
2.42
22.0
Shielded
Part ID
Light source
lm
Factor*
lbs
CRY150
638-1030
CFM32/GX24q-3 base
2400
1.00
22.0
638-1031
CFM42/GX24q-4 base
3200
1.33
22.0
638-1041
CMH70/ED17 coated/medium base
5800
2.42
22.0
0,02 fc
15
ø 6.50
0,04 0,09
10
ft
39.37
H: 2,75 ft
20
5
CTY150
CTY150
0,3 2,0 5
10
15
20
Shielded CRY150 39.37
Accessories: Planted root ESV4 – Galvanized steel. for CTY150/CRY150
697-8010
lbs 13.0
Direct burial support for installing bollards in landscaped areas. 9
ø 7.95 ø 9.06
13.78 15.75
Planted root ESV4
* Multiplier for footcandle value.
161
NTY100 SERIES Bollard. IP65. Marine-grade, die-cast aluminum alloy. 5CE superior corrosion protection including PCS hardware. Powdercoat finish in black RAL 9004, grey metallic RAL 9007 or white RAL 9016. Specify finish. Consult WE-EF color chart for other options. Prismatic polycarbonate lens. Silicone rubber gasket. Suitable for installation in landscaped areas or on concrete foundations.
Light source: CMH 39-70 W Beam distribution: Controlled Accessories: n
Integral [ECG] electronic CMH ballast in 120, 277 or 347 volt. Specify voltage.
UL, cUL: n
Fort Montluc. Lyon (F). Lighting design: Cobalt.
162
Mounting, page 163
Suitable for wet locations
Ordering guide: Specify 7 digit part ID together with voltage and finish. Example: 641-7151 – 120 V – Black RAL 9004
11.02
Controlled – One output
Part ID
Light source
lm
Factor*
lbs
NTY184
641-7151
CMH39/T-6/G-12 base
3300
1.00
31.0
641-7152
CMH70/T-6/G-12 base
6600
2.00
31.0
Controlled – Two output
Part ID
Light source
lm
Factor*
lbs
NTY184
641-7251
CMH39/T-6/G-12 base
3300
1.00
31.0
641-7252
CMH70/T-6/G-12 base
6600
2.00
31.0
H: 2,5 ft
12
8
4
4
0 ft
5 0
4
8
12
16
20
3.15 ø 0.35
0
2 1 0,5 0,2 0,1 0,05 fc 24
Controlled – One output
ft
33.46
H: 2,5 ft
12
8
7.09
5 0
4
2 1 0,5 0,2 0,1 0,05 fc 8
12
16
20
8.58 9.84
24
Controlled – Two output 12.52 13.78
Accessories: Planted root ESV4 – Galvanized steel. for NTY184
697-9303
lbs 16.0
Direct burial support for installing bollards in landscaped areas.
13.78 15.75
Planted root ESV4
* Multiplier for footcandle value.
163
ALY300 SERIES Pathway luminaire. IP55. Marine-grade, die-cast aluminum alloy. 5CE superior corrosion protection including PCS hardware. Powdercoat finish in black RAL 9004, grey metallic
Light source: LED 13-26 W, 3000 K (for 4000 K, refer to www.we-ef.com)
RAL 9007 or white RAL 9016. Specify finish. Consult WE-EF color chart for other options. Polycarbonate outer lens. Silicone rubber gasket. Suitable for installation in landscaped
Beam distribution: [C60]
areas or on concrete foundations. Accessories:
PMMA FT 360째 LED lens. 01.ALY350: One luminaire, bracket and pole. 02.ALY350: Two luminaires, bracket and pole. Integral [ECG] LED driver in 120 or 277 volt. Specify voltage. Luminaires and brackets are supplied in knocked-down form for easy installation on-site by installing contractor.
Tischlerei. H체tzel (D).
164
n
Mounting, page 165
UL, cUL: n
Suitable for wet locations
IOS Innovative Optical System: [C60] Controlled distribution, symmetric
Ordering guide: Specify 7 digit part ID together with voltage and finish. Example: 640-1120 – 120 V – Black RAL9004
21.65
[C60]
Part ID
Light source
K
lm*
Factor**
01.ALY350
640-1120
LED-FT 13W
3000
800
1.00
26.0
02.ALY350
640-1220
LED-FT 26W
3000
2 x 800
2.00
31.0
lbs 15.75
H: 7,5 ft
28
0,02 fc
21
0,03 0,09
14 7
21.65
0,3 1,3
ft
7
14
21
28
[C60]
90.55
Accessories: Planted root ESV6 – Galvanized steel. for ALY350
697-8013
lbs 32.0
19.69 23.62
Planted root ESV6
* Nominal lumen output based on LED manufacturers data at 25°C Tc. For rated lumens at 25°C Tq and latest data, refer to www.we-ef.com. ** Multiplier for footcandle value.
0.79
ø 6.97-8.54 ø 10.79
QSO200 SERIES Bollard. IP55. Marine-grade, die-cast aluminum alloy. 5CE superior corrosion protection including PCS hardware. Powdercoat finish in black RAL 9004, grey metallic RAL 9007
Light source: LED 12 W, 3000 K (for 4000 K, refer to www.we-ef.com)
or white RAL 9016. Specify finish. Consult WE-EF color chart for other options. Opal polycarbonate lens. Silicone rubber gasket. Suitable for installation in landscaped areas
Beam distribution: Diffused
or on concrete foundations. Accessories:
Integral [ECG] LED driver in 120 or 277 volt. Specify voltage.
n
Mounting, page 167
UL, cUL: n
166
Suitable for wet locations
Ordering guide: Specify 7 digit part ID together with voltage and finish. Example: 639-3421 – 120 V – Black RAL 9004
10.3
Diffused
Part ID
Light source
K
lm*
lbs
QSO229
639-3421
LED-FT 12W
3000
1400
33.0
14
4.7
H: 3,0 ft
7 0
1 0,5 0,2 0,1 0,05 0,02 fc
43.31
7 14 ft
7
14
21
28
Diffused
5.9
11.6
9.5
0.43
Accessories: Planted root ESV4 – Galvanized steel. for QSO229
697-8012
lbs 13.0
Direct burial support for installing bollards in landscaped areas.
13.78 15.75
Planted root ESV4
* Nominal lumen output based on LED manufacturers data at 25°C Tc. For rated lumens at 25°C Tq and latest data, refer to www.we-ef.com.
167
QSI200 SERIES Bollard. IP55. Marine-grade, die-cast aluminum alloy. 5CE superior corrosion protection including PCS hardware. Powdercoat finish in black RAL 9004, grey metallic RAL 9007
Light source: LED 6 W, 3000 K (for 4000 K, refer to www.we-ef.com)
or white RAL 9016. Specify finish. Consult WE-EF color chart for other options. Prismatic tempered glass lens. Silicone rubber gasket. Suitable for installation in landscaped areas
Beam distribution: 'Forward throw'
or on concrete foundations. Accessories:
Integral [ECG] LED driver in 120 or 277 volt. Specify voltage.
n
Mounting, page 169
UL, cUL: n
168
Suitable for wet locations
Ordering guide: Specify 7 digit part ID together with voltage and finish. Example: 639-3321 – 120 V – Black RAL 9004
10.3
'Forward throw' QSI254 6
Part ID
Light source
639-3321
6 LED 6W/350 mA
K
lm*
lbs
3000
756
26.0
4.7
H: 3,0 ft
3 0
10 5 2 1 0,5
0,2 fc
43.31
3 6 ft
3
6
9
12
'Forward throw'
5.9
11.6
9.5
0.43
Accessories: Planted root ESV4 – Galvanized steel. for QSI254
697-8012
lbs 13.0
Direct burial support for installing bollards in landscaped areas.
13.78 15.75
Planted root ESV4
* Nominal lumen output based on LED manufacturers data at 85°C Tj. For rated lumens at 25°C Tq and latest data, refer to www.we-ef.com.
169
TSI200 SERIES Bollard. IP55. Marine-grade, die-cast aluminum alloy. 5CE superior corrosion protection including PCS hardware. Powdercoat finish in black RAL 9004, grey metallic RAL 9007
Light source: LED 6 W, 3000 K (for 4000 K, refer to www.we-ef.com)
or white RAL 9016. Specify finish. Consult WE-EF color chart for other options. Prismatic tempered glass lens. Silicone rubber gasket. Suitable for installation in landscaped areas
Beam distribution: 'Forward throw'
or on concrete foundations. Accessories:
Integral [ECG] LED driver in 120 or 277 volt. Specify voltage.
n
Mounting, page 171
UL, cUL: n
170
Suitable for wet locations
Ordering guide: Specify 7 digit part ID together with voltage and finish. Example: 639-4321 – 120 V – Black RAL 9004
10.3
'Forward throw'
Part ID
Light source
TSI254
639-4321
6 LED 6W/350 mA
8
K
lm*
lbs
3000
756
33.0
4.7
H: 3,5 ft
4 0
10 5 2 1 0,5
0,2 0,1 fc
47.25
4 8 ft
4
8
12
16
'Forward throw'
5.9
11.6
9.5
0.43
Accessories: Planted root ESV4 – Galvanized steel. for TSI254
697-8012
lbs 13.0
Direct burial support for installing bollards in landscaped areas.
13.78 15.75
Planted root ESV4
* Nominal lumen output based on LED manufacturers data at 85°C Tj. For rated lumens at 25°C Tq and latest data, refer to www.we-ef.com.
171