Z-BAR MOUNTING HARDWARE
Installation
Hardware Included:
A. Round Screw (4x)
B. Plastic Anchor (8x)
Installation:
C . Z-Bar (4x) (2 Preinstalled)
1. Remove the taped Z-Bar (C) from the back of the mirror. If not taped to the back, Z-Bar hardware will be located in the security bag on pallet #1.
2. Mark on wall where Z-Bar (C) will hang acording to the orientation desired and drill two holes in the marked location.
3. Firmly insert anchors (B) into drilled holes.
4. Place the Z-Bar (C) over the anchors (B) and fasten to wall using round screws (A).
5. Place mirror on wall, interlocking the Z-Bars (C).
Disclaimer Wendover Art Group is not responsible for any inappropriate installation of the mirror. If the piece needs to be permanently secured to the wall, we advise hiring a professional installer to mount the piece.
DO NOT
Do not use cleaning products on frames. Do not throw away security hardware. Do not drop or mishandle mirrors.
wall wall (C) (B) (B) 1. 2. 3.
wall (C) (B) (B) (A) (A) 4. (C) (C) (C) (C) (C) 5. before WALL WALL