Inhaltsverzeichnis Sommaire Summary
Industriehof Scherenbostel
® Hammerschlegel und Schlegelmesser Marteaux broyeurs et couteaux pour débroussailleuses Pruning hammers and flail mover blades
3
4-204
Universalmesser Couteaux universels All-purpose blades
205-208
Halter Chapes à souder Slides
209-211
Schlegelübersicht Tableau des fléaux Flails summary
212-213
Befestigungselemente Éléments de fixation Fastening elements
214-217
Schäkel Manilles Shackles
218-219
Scheiben und Buchsen Rondelles et entretoises Washers and bushs
220-222
223
Kettenmatten und Prallschutzketten Nattes en maillons de chaîne et chaînes de protection Chain mesh mats and protection chains
®
Messer für Grabenfräsen nach Fabrikat Couteaux pour fossoyeuses pour machines Trencher blades to fit
224-226
Rundschaftmeißel Burin à corps cylindrique Round attrack tick
228-229
Alle Rechte vorbehalten Nachdruck, auch auszugsweise, verboten Tous droits réservés Toute reproduction, même par extrait, défendue All rights reserved Reproduction in any form forbidden
C
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding
Heinrich Rodenbostel GmbH Im Winkel 5 D-30900 Wedemark Telefon +49 (0) 51 30 - 60 72 - 0 Telefax +49 (0) 51 30 - 60 72 32 Internet: www.industriehof.com E-mail: info@industriehof.com
Copyright Industriehof Scherenbostel
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! 12.12 La référence d´origine présentée ci-dessus ne sert qu´à la coordination! The original part-numbers are only indicated for comparison!
Gruppe 3 Seite 1 groupe/section 3 page 1
Inhaltsverzeichnis Sommaire Summary
Hammerschlegel und Schlegelmesser nach Fabrikat:
marteaux broyeurs et couteaux pour débroussailleuses pour machines: / pruning hammers and flail mover blades to fit:
Aedes Agram Agria Agricom Agrimaster Agromec Agromet Agrotec Amazone AS Assaloni Avant Techno Oy BAMS BCS Becchio & Mandrile Berry Berti Bomford Breviglieri Brouchard Bruni Bucher Cabe (Nuova Cabe) Calderoni Caroni Carroy et Giraudon Celli Chabas Claas Clemens Mc Connel Cosma Cosmag Desvoys Doppstadt Dragone ® Dücker Eberle Econ Epoke F.A.E. Facma Falc Falconero Fantini Fehrenbach Fendt Ferri Fischer Forigo-Roteritalia Gestin Gilbers
4 4-5 5-7 7-9 10-14 15-16 17-18 18 18-19 20-21 21 21-22 22 22 22-24 24 25-27 27-34 35-36 36 36-37 37 37-39 39 39-40 40-41 41-42 42 42-43 43 43-46 46 46 46-47 47 47-49 49-54 54 54 55-58 59 59 59-61 61 61 62-63 64 64-70 70-73 73 74 74-78
Seite / page
Gimac Goede Gramegna Gutbrod Gyro Hansa Hemos Herder Hermes HMF FREI Howard Humus Hymach Ilmer Irus Iseki JF JNO John Deere Joskin Kongskilde Kubota Kuhn Kverneland-Maletti Lagarde Leckron van Lengerich Lipco Maletti Maschio M.E.A.A.T. Meritano Moureau Mott Mulag Muratori Müthing Mörtl Nicolas Nobili Noremat Oehler OMARV Orsi Palladino Pegoraro Perfect Perugini Peruzzo Pircher Procomas Quivogne
78 78 79 79 79 80 80 81-82 82-84 84-85 86-88 88-92 92-93 94 95 95 96 96 96 97 97 97 97-102 102-105 105-106 106 106 106-107 107 107-111 111-113 113 113 113 114-119 119-120 120-121 122 122-123 123-127 128-133 133 133-135 135-138 138-140 140 140-142 143 143-144 144 144-145 146-147
Seite / page
Rapid Rasant Rinieri Rivierre Casalis RMV Rosatella Rotoram Rousseau Sabo Sauerburger Saxonia S.C.A.I. Schanzlin Schmidt Schots Schulte Seko Seppi Sicma Sicma (Miglianico) S.M.A. Sovema Spearhead Spragelse-Mica Staiger Stella Stoll Szolnoki Taarup Terral Terranova Tierre Tornedo Tortella Turner Tünnißen & Stocks Twose UgelØse Ungarn Uni Farm Vigolo Vogel & Noot Votex Willibald Wiwexa Zampini Zanon Zappator
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! Gruppe 3 Seite 2 La référence d´origine présentée ci-dessus ne sert qu´à la coordination!
groupe/section 3 page 2
The original part-numbers are only indicated for comparison!
147 148 149 149 150 150 150 151-154 154 154-157 157 157 157 157-159 159 160-161 162 162-164 164-165 166-167 167-172 172-174 174-178 178-179 180 180 180 180 181-182 183 183-184 184 185 186 187-189 189-190 190 191 191-192 192 193-194 194-196 197-199 200 201 201-202 202 203-204
Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
Seite / page
12.12
Inhaltsverzeichnis Sommaire Summary
Seite / page
209-211
Schlegelübersicht Tableau des fléaux Flails summary
212-213
Befestigungselemente Éléments de fixation Fastening elements
214-217
218-219
Scheiben und Buchsen Rondelles et entretoises Washers and bushs
Couteaux pour fossoyeuses pour machines: Trencher blades to fit:
205-208
Halter Chapes à souder Slides
Schäkel Manilles Shackles
Messer für Grabenfräsen nach Fabrikat:
220-222
Seite / page
224 224 224 224-226 226-227 227
Boos Cosmoter Davis Dondi Maletti Mulag
Rundschaftmeißel für Grabenfräsen Burin à corps cylindrique pour fossoyeuses Round attrack tick for trencher
228
Rundschaftmeißel für Straßenfräsen Burin à corps cylindrique pour fraiser de rue Round attrack tick for street trencher
229
Kettenmatten und Prallschutzketten Nattes en maillons de chaîne et chaînes de protection Chain mesh mats and protection chains 223
Die angebotenen Artikel sind Qualitätserzeugnisse mit Garantie, passend zu den entsprechenden Maschinenfabrikaten. (Keine Original Ersatzteile) Die Original-Nummern dienen nur der Zuordnung. Alle angegebenen Abmessungen und Ausführungen entsprechen den z.Zt. gültigen Anforderungen. Wir behalten uns das Recht auf Abweichungen, bedingt durch Werkzeug- oder Anforderungsänderungen, vor. Les articles présentés sont des produits de qualité garantie s‘accordant aux machines correspondantes. (aucune pièce de rechange originale) Les références d‘origines ne servent qu‘à la coordination. Les exécutions et les dimensions satisfont aux exigences actuelles. ® nous réservons le droit de toute modification dûe aux changements d´exigences ou d´outils. Nous The showed parts are guaranteed quality products, fitting the equivalent machines.(no original spare parts) The original part-numbers are only indicated for coordination. The showed dimensions and designs are in accordance with the actual requests. Every modification caused by changes of requirements or tools are subject to alterations.
Hammerschlegel werden ausschließlich aus Borstahl hergestellt, auf 48 +/- 3 HRC gehärtet und kugelbombardiert Les marteaux broyeurs sont fabriqués exclusivement en acier au bore, trempé à 48 +/- 3 HRC et grenaillés Pruning hammers are exclusively made of boron steel, hardned on 48 +/- 3 HRC and shot peening treated
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! 12.12 La référence d´origine présentée ci-dessus ne sert qu´à la coordination! The original part-numbers are only indicated for comparison!
Gruppe 3 Seite 3 groupe/section 3 page 3
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding
Universalmesser Couteaux universels All-purpose blades
Hammerschlegel und Schlegelmesser
Marteaux broyeurs et couteaux pour débroussailleuses Pruning hammers and flail mover blades
Aedes
Aedes
63-AED-08
63-AED-06-R Gedrehtes Messer couteau torsadé / twisted blade
Y-Messer couteau-Y / Y-blade
8
Ø16,5
50 50
Ø18
80
135
10
53
600
Orig.-Nr. / réf. origine / orig.-part-no.
0,430
Gewicht / poids / weight
Aedes
63-AED-10
Hammerschlegel marteau broyeur pruning hammer
Ø16,5
70
70
16,5
68
185
0,440
Agram
Orig.-Nr. / réf. origine / orig.-part-no.
Agram ®
63-IND-154
Y-Messer couteau-Y / Y-blade
8
Gewicht / poids / weight
0,510
Ø29 7
8
46 Orig.-Nr. / réf. origine / orig.-part-no.
50.507003
Gewicht / poids / weight
0,670
110
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! Gruppe 3 Seite 4 La référence d´origine présentée ci-dessus ne sert qu´à la coordination!
groupe/section 3 page 4
50
58
65
Orig.-Nr. / réf. origine / orig.-part-no.
Schlegel fléau / flail
35
65
Ø20,5
2,000
Gewicht / poids / weight
Agram
63-TAA-02
Y-Messer couteau-Y / Y-blade 60
2,000
Gewicht / poids / weight
Orig.-Nr. / réf. origine / orig.-part-no.
215
63-IND-153
185
140
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
20,5
R= 88
112
10
R= 88
40
63-RM-5-20
Hammerschlegel marteau broyeur pruning hammer
Winkelmesser couteau équerre / L-blade
3,450
Aedes
63-RM-5-16
150
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
Aedes
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
The original part-numbers are only indicated for comparison!
1,060
Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved
40
12.12
Hammerschlegel und Schlegelmesser
Marteaux broyeurs et couteaux pour débroussailleuses Pruning hammers and flail mover blades
Agram
63-ZZZ-18
63-ZZZ-20
Ø22
35
Ø13
Orig.-Nr. / réf. origine / orig.-part-no.
0,030
Gewicht / poids / weight
Agram
Orig.-Nr. / réf. origine / orig.-part-no.
0,070
Gewicht / poids / weight
Agram
63-ZZZ-21
Orig.-Nr. / réf. origine / orig.-part-no.
0,085
Gewicht / poids / weight
63-AGR-81 Buchse entretoise / bush
Distanzscheibe rondelle d´écartement / diatence washer Ø25,5 Ø13
Ø20,5
58
19,8
17,8
Ø25,5 Ø16,5
Ø44,5
Ø50
Orig.-Nr. / réf. origine / orig.-part-no.
0,170
Gewicht / poids / weight
Orig.-Nr. / réf. origine / orig.-part-no.
0,130
Gewicht / poids / weight
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
0,210
Agria 40
Ø10
2 1
Ø34
Ø20,5
21
25
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
90
4
0,100
M10x1,5
M10x1,5
3
55
®
Distanzscheibe rondelle d´écartement / diatence washer
30
Agram
63-AGR-80
Ø16
Agram
63-ZZZ-22
Distanzscheibe rondelle d´écartement / diatence washer
32,5 39
Ø13
Ø34
35
Buchse entretoise / bush
Ø23 Ø25
Buchse entretoise / bush
Ø17,5
Buchse entretoise / bush
Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding
Agram
63-ZZZ-19
Best. Nr.: réf. article part-no.
Orig.-Nr. réf. origine orig.-part-no.
Gewicht poids weight
490196
0,100
1
Y-Messer couteau-Y / Y-blade
63-STE-02
2
Schraube - 10.9 boulon - 10.9 / bolt - 10.9
105593110
0,040
3
Sicherungsmutter - 8.8 écrou à freinage interne - 8.8 self-locking nut - 8.8
30-MU10-2
0,010
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! 12.12 La référence d´origine présentée ci-dessus ne sert qu´à la coordination! The original part-numbers are only indicated for comparison!
Gruppe 3 Seite 5 groupe/section 3 page 5
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
Agram
Hammerschlegel und Schlegelmesser
Marteaux broyeurs et couteaux pour débroussailleuses Pruning hammers and flail mover blades
Agria 1
Ø10,5
37
2
90
47
24
17
35
65
M10x1,5 28
3
Orig.-Nr. réf. origine orig.-part-no.
Best. Nr.: réf. article part-no.
Ø10
Gewicht poids weight
1
Gedrehtes-Messer couteau torsadé / twisted blade
63-EPO-54 256932041 0,100
2
Schäkel manille / shackle
63-HAN-71 256932040 0,070
3
Schraube mit Sicherungsmutter-10.9 boulon avec écrou à freinage interne-10.9 bolt with self-locking nut-10.9
Schraube
63-1065-1
256932042
0,060
Mutter
261105010
10 M8
50
8,
3
7,5
Ø
2,5
3
36
Ø10x20
1
2
16
17
30
70
25,5
Best. Nr.: réf. article part-no.
20
Orig.-Nr. réf. origine orig.-part-no.
Gewicht poids weight
71009
0,040
1
Y-Messer couteau-Y / Y-blade
63-AGR-52
2
Schäkel manille / shackle
63-AGR-71
0,040
3
Schraube mit Sicherungsmutter-8.8 boulon avec écrou à freinage interne-8.8 bolt with self-locking nut-8.8
63-855-1
0,030
Agria
Agria ® Ø8
Ø2
2
Schlegelmesser fléau / flail 65 37
2 22
38
1
63-IND-173
Ø8 23,5
18,5
120
6
Ø30
12
Best. Nr.: réf. article part-no.
Orig.-Nr. réf. origine orig.-part-no.
Gewicht poids weight
1
Y-Messer couteau-Y / Y-blade
63-AGR-51
0,040
2
Bolzen mit Splint piton avec goupille bolt with split-pin
63-TOR-81
0,011
170
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
Agria
Orig.-Nr. / réf. origine / orig.-part-no.
74548
Gewicht / poids / weight
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! Gruppe 3 Seite 6 La référence d´origine présentée ci-dessus ne sert qu´à la coordination!
groupe/section 3 page 6
The original part-numbers are only indicated for comparison!
0,480
Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved
5
10,5
12.12
Hammerschlegel und Schlegelmesser
Marteaux broyeurs et couteaux pour débroussailleuses Pruning hammers and flail mover blades
Agria
63-AGR-56 Rotorklinge couteau rotatifs / rotary mower blade
96
40 3
Orig.-Nr. / réf. origine / orig.-part-no.
479006
Agria 1 Ø12,5
M10x1,5
34
Ø25 Ø10,5
2
M10x1,5
3
Agricom
63-RM-77
Best. Nr.: réf. article part-no.
95
4
63-AGR-54
2
Scheibe rondelle / washer
63-AGR-55
0,018
3
Sicherungsmutter écrou à freinage interne / self-locking nut
30-MU10-2
0,011
4
Schraube - 10.9 boulon - 10.9 bolt - 10.9
105593110
0,040
Hammerschlegel marteau broyeur / pruning hammer
79084
63-RM-4
Hammerschlegel marteau broyeur pruning hammer
Y-Messer couteau-Y / Y-blade Ø16,5
40 16,5
R=
98
R= 110
130
10
120
60
95
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
0,120
Agricom
50 16,5
Gewicht poids weight
Y-Messer couteau-Y / Y-blade
63-AGC-13
40
Orig.-Nr. réf. origine orig.-part-no.
1
Agricom ®
Zu einem Satz gehören 2 Scheiben Un jeu = 2 disques 2 washers belongs to a set
55
4 30
40
Hinweis: Avvertissement: Notice:
1,150
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
0,490
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! 12.12 La référence d´origine présentée ci-dessus ne sert qu´à la coordination! The original part-numbers are only indicated for comparison!
1,350
Gruppe 3 Seite 7 groupe/section 3 page 7
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
0,075
Gewicht / poids / weight
4
Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding
Ø19
Hammerschlegel und Schlegelmesser
Marteaux broyeurs et couteaux pour débroussailleuses Pruning hammers and flail mover blades
Agricom
Agricom
63-RM-5-16
Hammerschlegel marteau broyeur pruning hammer
63-SIC-03
Hammerschlegel marteau broyeur pruning hammer
Winkelmesser couteau équerre / L-blade 60
40
70
16,5
120
57
185
Orig.-Nr. / réf. origine / orig.-part-no.
1,150
Gewicht / poids / weight
Agricom
Orig.-Nr. / réf. origine / orig.-part-no.
2,000
Gewicht / poids / weight
Agricom
Hammerschlegel marteau broyeur pruning hammer
Hammerschlegel marteau broyeur pruning hammer
Orig.-Nr. / réf. origine / orig.-part-no.
0,800
Gewicht / poids / weight
Agricom
63-RM-69-20
63-RM-8-20
63-AGM-38
20,5
Schlegel fléau flail
60
Ø25,5
70
8
R= 90
R=1 60
20
235
40
118
160
Orig.-Nr. / réf. origine / orig.-part-no.
1,350
Gewicht / poids / weight
Agricom
63-RM-5-20
Orig.-Nr. / réf. origine / orig.-part-no.
2,550
Gewicht / poids / weight
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
Agricom 63-RM-6
®
Hammerschlegel marteau broyeur pruning hammer
Hammerschlegel marteau broyeur pruning hammer 40
70
16,5
95
20,5
137
185
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
R=
R= 88
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
8
R= 88
R= 90
16,5
Ø25,5
2,000
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
1,600
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! Gruppe 3 Seite 8 La référence d´origine présentée ci-dessus ne sert qu´à la coordination!
groupe/section 3 page 8
The original part-numbers are only indicated for comparison!
0,840
Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved
63-RM-8
195
Agricom
12.12
Hammerschlegel und Schlegelmesser
Marteaux broyeurs et couteaux pour débroussailleuses Pruning hammers and flail mover blades
Agricom
63-RM-10-20 Hammerschlegel marteau broyeur pruning hammer
63-AGC-08
Y-Messer couteau-Y / Y-blade 40
Y-Messer couteau-Y / Y-blade 60
Ø16,5
20,5
Ø16,5
8
8
R=
100
115
55
51
59
150 Orig.-Nr. / réf. origine / orig.-part-no.
1,850
Gewicht / poids / weight
0,290
Gewicht / poids / weight
0,480
Gewicht / poids / weight
Hammerschlegel marteau broyeur pruning hammer
60
19
Ø25,5 Ø17
1 204
8
14
12
Orig.-Nr. / réf. origine / orig.-part-no.
0,220
Gewicht / poids / weight
Agricom
Orig.-Nr. réf. origine orig.-part-no.
Best. Nr.: réf. article part-no.
55
62
2
Gewicht poids weight
1
Y-Messer couteau-Y / Y-blade
63-SIC-02
0,760
2
Buchse entretoise bush
63-FEI-17
0,011
Agricom
63-FEI-04
63-AGC-09
®
Y-Messer couteau-Y / Y-blade
Y-Messer couteau-Y / Y-blade 60
73
145
8
Gewicht / poids / weight
7
59
Orig.-Nr. / réf. origine / orig.-part-no.
0,520
215
Ø25,5
Ø25,5
45
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
0,660
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! 12.12 La référence d´origine présentée ci-dessus ne sert qu´à la coordination! The original part-numbers are only indicated for comparison!
Gruppe 3 Seite 9 groupe/section 3 page 9
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
Agricom
63-RM-86
60
Orig.-Nr. / réf. origine / orig.-part-no.
Ø25
Agricom
Orig.-Nr. / réf. origine / orig.-part-no.
R= 64
Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding
Agricom
63-FLN-02
130
Agricom
Hammerschlegel und Schlegelmesser
Marteaux broyeurs et couteaux pour débroussailleuses Pruning hammers and flail mover blades
Agrimaster
Agrimaster
63-AGM-506
63-RM-64-14 Hammerschlegel marteau broyeur pruning hammer
Ø20 Ø14,5
14,5
R=
10 5
17
40
100
Orig.-Nr. / réf. origine / orig.-part-no.
0,055
Gewicht / poids / weight
3001095
0,680
Gewicht / poids / weight
Agrimaster
63-RM-64-20
63-AGM-29
Hammerschlegel marteau broyeur pruning hammer
Y-Messer couteau-Y / Y-blade
20,5
40
40 Ø14
R=
10
5
105
10
53
100
3000548
0,620
Gewicht / poids / weight
Agrimaster Hammerschlegel marteau broyeur pruning hammer
0,365
Gewicht / poids / weight
Agrimaster
Agrimaster
63-SM-01
®
63-SM-04
Gerades Messer couteau droit / straight blade
Y-Messer couteau-Y / Y-blade
16,5
40
40
40
Ø14x30
Ø14x30 5
10
5
5
82
63-RM-64
Orig.-Nr. / réf. origine / orig.-part-no.
81
Orig.-Nr. / réf. origine / orig.-part-no.
R=
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
Agrimaster
Orig.-Nr. / réf. origine / orig.-part-no.
42
100
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
0,650
Orig.-Nr. / réf. origine / orig.-part-no.
3005674
Gewicht / poids / weight
0,140
Orig.-Nr. / réf. origine / orig.-part-no.
3005675
Gewicht / poids / weight
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! Gruppe 3 Seite 10 La référence d´origine présentée ci-dessus ne sert qu´à la coordination!
groupe/section 3 page 10
The original part-numbers are only indicated for comparison!
0,120
Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved
Buchse entretoise / bush
12.12
Hammerschlegel und Schlegelmesser
Marteaux broyeurs et couteaux pour débroussailleuses Pruning hammers and flail mover blades
Agrimaster
63-ORS-02
Schäkel manille / shackle
63-FEI-13
Y-Messer couteau-Y / Y-blade 60
Y-Messer couteau-Y / Y-blade
Ø25,5
40
Ø12,5
48
Ø14x29 8
245
8
52
Ø11
43
80
Orig.-Nr. / réf. origine / orig.-part-no.
0,125
Gewicht / poids / weight
Orig.-Nr. / réf. origine / orig.-part-no.
0,960
Gewicht / poids / weight
Orig.-Nr. / réf. origine / orig.-part-no.
0,210
Gewicht / poids / weight
28
120
Agrimaster Hammerschlegel marteau broyeur pruning hammer
Ø25
80
25,5
M16x2
40
30
63-SEP-51
Ø16,5
3
1
2
Best. Nr.: réf. article part-no.
Gewicht poids weight
3002936
1,060
1
Hammerschlegel marteau broyeur / pruning hammer
63-RM-70
2
Buchse entretoise / bush
63-FEI-63
0,054
3
Schraube mit Sicherungsmutter-10.9 boulon avec écrou à freinage interne-10.9 bolt with self-locking nut-10.9
63-1680
0,170
Agrimaster
Agrimaster
Hammerschlegel marteau broyeur pruning hammer
Hammerschlegel marteau broyeur pruning hammer
63-M-39
®
Orig.-Nr. réf. origine orig.-part-no.
63-RM-10-16
40 31
55
18,5
R=
70
150
90
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
R=
12
0
80 R=
16,5
100
58
1,630
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
1,390
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! 12.12 La référence d´origine présentée ci-dessus ne sert qu´à la coordination! The original part-numbers are only indicated for comparison!
1,770
Gruppe 3 Seite 11 groupe/section 3 page 11
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
Agrimaster
R=1 25
Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding
Agrimaster
63-FEI-02
85
Agrimaster
Hammerschlegel und Schlegelmesser
Marteaux broyeurs et couteaux pour débroussailleuses Pruning hammers and flail mover blades
Agrimaster
Agrimaster
63-AGM-05
Hammerschlegel marteau broyeur / pruning hammer
2
Schraube mit Sicherungsmutter - 10.9 boulon avec écrou à freinage interne - 10.9 bolt with self-locking nut - 10.9
Orig.-Nr. réf. origine orig.-part-no.
Gewicht poids weight
63-M-37-16
0,650
63-1690
0,200
63-RM-8-20
10
8
78
Orig.-Nr. / réf. origine / orig.-part-no.
3000105
0,400
Gewicht / poids / weight
Agrimaster
Agrimaster
63-AGM-13
Hammerschlegel marteau broyeur pruning hammer
63-AGM-21
Winkelmesser couteau équerre / L-blade
60
Y-Messer couteau-Y / Y-blade 35
Ø25,5
40
Ø14,5 5
R= 90
145
10
20
25
50
118
Orig.-Nr. / réf. origine / orig.-part-no.
1,120
Gewicht / poids / weight
Orig.-Nr. / réf. origine / orig.-part-no.
3001221
Gewicht / poids / weight
0,730
Agrimaster
Orig.-Nr. / réf. origine / orig.-part-no.
0,120
Gewicht / poids / weight
Agrimaster ®
1 20,5
60
53
55
63-AGM-10
2
132
14
Schlegel fléau flail
M20x2,5
40
100
30
R=
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
Agrimaster
Ø25,5
M16x2
Best. Nr.: réf. article part-no.
1
Schlegel fléau flail 50
150
R =1 00
40
85
2
90
16,5
80
40
150
Best. Nr.: réf. article part-no.
21
R=
Gewicht Orig.-Nr. poids réf. origine orig.-part-no. weight
1
Hammerschlegel marteau broyeur / pruning hammer
63-RM-10-20 3001119
1,850
2
Schraube mit Sicherungsmutter - 10.9 boulon avec écrou à freinage interne - 10.9 bolt with self-locking nut - 10.9
63-AGM-501 3000313
0,450
8 100
Orig.-Nr. / réf. origine / orig.-part-no.
3000548
Gewicht / poids / weight
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! Gruppe 3 Seite 12 La référence d´origine présentée ci-dessus ne sert qu´à la coordination!
groupe/section 3 page 12
10 0
The original part-numbers are only indicated for comparison!
0,450
Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved
1
12.12
Hammerschlegel und Schlegelmesser
Marteaux broyeurs et couteaux pour débroussailleuses Pruning hammers and flail mover blades
Agrimaster 53
Ø20,5 8
30
35
2 120
Best. Nr.: réf. article part-no.
52
Orig.-Nr. réf. origine orig.-part-no.
Gewicht poids weight
3000323
0,300
1
Y-Messer couteau-Y / Y-blade
2
Distanzbuchse entretoise d’écartement / distance bush
63-AGM-502 3000552
0,120
3
Schraube mit Sicherungsmutter-8.8 boulon avec écrou à freinage interne-8.8 bolt with self-locking nut-8.8
63-AGM-501 3000313
0,450
63-AGM-03
2,5
3 90
Ø24
Ø15
2
M14x2 20
1 40
Best. Nr.: réf. article part-no.
85
Agrimaster 63-JDE-01 Schlegel fléau flail
10x45°
1
Hammerschlegel marteau broyeur / pruning hammer
2
Scheibe rondelle / washer
3
Schraube mit Sicherungsmutter-12.9 boulon avec écrou à freinage interne-12.9 bolt with self-locking nut-12.9
17
Ø14x25
6,5
35
0,005
63-TUR-91
0,150
Gerades Messer couteau droit / straight blade 60
Ø14,5
Gewicht / poids / weight
42
72
Orig.-Nr. / réf. origine / orig.-part-no.
0,140
Ø25,5
10
114
5
3
0,730
63-9000
Y-Messer couteau-Y / Y-blade
8x45°
3002322
63-M-37-14
63-AGM-02
63-AGM-04
6
Gewicht poids weight
Agrimaster
Agrimaster ®3
Orig.-Nr. réf. origine orig.-part-no.
150
R=1
00
14,5
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
0,160
Orig.-Nr. / réf. origine / orig.-part-no.
3000107
Gewicht / poids / weight
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! 12.12 La référence d´origine présentée ci-dessus ne sert qu´à la coordination! The original part-numbers are only indicated for comparison!
0,610
Gruppe 3 Seite 13 groupe/section 3 page 13
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
Agrimaster
80
Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding
1
3
M20x2,5
60
40
132
14
Ø32 Ø22
Hammerschlegel und Schlegelmesser
Marteaux broyeurs et couteaux pour débroussailleuses Pruning hammers and flail mover blades
Agrimaster
Agrimaster 1
Y-Messer couteau-Y / Y-blade
49 Ø16
Ø25,5
60
Ø25,5
202
8
Ø16,5
3 4
60 Ø25,5
Ø35
62
4
4
Orig.-Nr. / réf. origine / orig.-part-no.
Ø50
5
6
M16x1,5
80
18,5
Agrimaster 40
Best. Nr.: réf. article part-no.
Orig.-Nr. réf. origine orig.-part-no.
Gewicht poids weight
3000106
0,650
1
Y-Messer couteau-Y / Y-blade
2
Distanzbuchse entretoise d´écartement / distance bush
63-AGM-500 3000011
0,110
3
Scheibe rondelle / washer
63-AGM-503 3000182
0,025
4
Distanzscheibe rondelle d´écartement / distance washer
63-AGM-504 3000178
0,045
5
Schraube - 12.9 boulon - 12.9 / bolt - 12.9
6
Sicherungsmutter écrou à freinage interne / self-locking nut
63-AGM-01
Agrimaster 63-AGM-30
60
51-1680R
1101630
51-MU16-1
1012416
0,152 0,030
Agrimaster Schlegel fléau flail
Ø25,5
60
Hammerschlegel marteau broyeur / pruning hammer
58 31
0
8 R=
70
3008045
1,730
Gewicht / poids / weight
Agrimaster
63-AGM-38
®
63-RM-99
Orig.-Nr. / réf. origine / orig.-part-no.
63-ZZZ-40
Y-Messer couteau-Y / Y-blade
Ø25,5
60
Ø25,5
8
147
8
235
8
235
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
M16x1,5
Schlegel fléau flail
0,740
Gewicht / poids / weight
51
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
0,840
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
0,840
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! Gruppe 3 Seite 14 La référence d´origine présentée ci-dessus ne sert qu´à la coordination!
groupe/section 3 page 14
The original part-numbers are only indicated for comparison!
0,520
Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved
150
10
Ø25
60
63-IND-944
2
12.12
Hammerschlegel und Schlegelmesser
Marteaux broyeurs et couteaux pour débroussailleuses Pruning hammers and flail mover blades
Agromec
Agromec
63-M-37-14
63-AGM-10
Hammerschlegel marteau broyeur pruning hammer 40
Schlegel fléau flail 40
21
R =1 00
R=
85
3001095
Gewicht / poids / weight
10 0
8 100
Orig.-Nr. / réf. origine / orig.-part-no.
Orig.-Nr. / réf. origine / orig.-part-no.
3000548
0,730
0,450
Gewicht / poids / weight
1 55
2
R=
100
50
M20x2,5
Best. Nr.: réf. article part-no.
150
1
Hammerschlegel marteau broyeur / pruning hammer
2
Schraube mit Sicherungsmutter - 10.9 boulon avec écrou à freinage interne - 10.9 bolt with self-locking nut - 10.9
Anzahl der Hammerschlegel und Schrauben nombre de marteaux broyeurs et boulons number of pruning hammers and bolts
120
20,5
Maschinentyp modèle de machine Gewicht machine type
Orig.-Nr. poids réf. origine orig.-part-no. weight
63-RM-10-20
1,850 Schraube
63-20120
3002392 Mutter
0,410
63-RM-10-20
63-20120
16 20 24 20 32
16 20 24 20 32
AGP200 TS260 TS280 HF230 HF280
1012420
Agromec
Ø25
Ø30
Ø12,5
10
1 2
4
32
90
50
12
49,5
1
M12x1,75
3
Ø25 Ø12,5
2
3 4
Schlegel fléau / flail Innenbuchse entretoise interne / internal bush Außenbuchse entretoise externe / external bush Schraube mit Sicherungsmutter - 12.9 boulon avec écrou à freinage interne - 12.9 bolt with self-locking nut - 12.9
Ø35
4
Ø34,5
®
Gewicht Orig.-Nr. poids réf. origine orig.-part-no. weight
Best. Nr.: réf. article part-no.
63-IND-477
8210392
0,997
63-AGM-508 8209896
0,210
63-AGM-509 8209895
0,048
63-1291
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! 12.12 La référence d´origine présentée ci-dessus ne sert qu´à la coordination! The original part-numbers are only indicated for comparison!
0,105
Gruppe 3 Seite 15 groupe/section 3 page 15
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
Agromec
175
Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding
14,5
Hammerschlegel und Schlegelmesser
Marteaux broyeurs et couteaux pour débroussailleuses Pruning hammers and flail mover blades
Agromec Ø20,5
3 120
16
1
17
8
Ø32 Ø22
Ø32 Ø14,5
4
5
4
Ø35 Ø14,5
2
Best. Nr.: réf. article part-no.
52
90
6
20
7
2
3000323
0,300
Distanzscheibe rondelle d´écartement / distance washer
63-AGM-505 3004962
0,020
3
Distanzbuchse entretoise d´écartement / distance bush
63-AGM-506 3000553
0,055
4
Distanzbuchse entretoise d´écartement / distance bush
63-AGM-507 3000598
0,070
5
Distanzbuchse entretoise d´écartement / distance bush
63-AGM-502 3000552
0,120
6
120
M20x2,5
Y-Messer couteau-Y / Y-blade
50
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
M14x2
1
7
63-AGM-03
Schraube mit Sicherungsmutter-12.9 boulon avec écrou à freinage interne-12.9 bolt with self-locking nut-12.9
63-TUR-91
Schraube mit Sicherungsmutter-10.9 boulon avec écrou à freinage interne-10.9 bolt with self-locking nut-10.9
63-20120
Alternativ zu 63-RM-10-20 alternative 63-RM-10-20 alternatively to 63-RM-10-20
Schraube
1101434
0,150
Mutter
1012414 Schraube
3002392
0,410
Mutter
1012420
Alternativ zu 63-M-37-14 alternative 63-M-37-14 / alternatively to 63-M-37-14
63-AGM-03
63-AGM-03
63-AGM-03
Orig.-Nr. Gewicht réf. origine poids orig.-part-no. weight
63-AGM-507
63-AGM-03
63-TUR-91
63-20120
®
63-AGM-505 63-AGM-505
63-AGM-506
63-AGM-502
Anzahl der Y-Messer, Buchsen, Scheiben und Schrauben nombre de couteaux-Y, entretoises, rondelles et boulons number of Y-Blades, bushes, washers and bolts
Anzahl der Y-Messer, Buchsen und Schrauben nombre de couteaux-Y, entretoises et boulons number of Y-Blades, bushes and bolts
Maschinentyp Modèle de machine Machine type
AGP200 TS260 TS280 HF230 HF280
Y-Messer couteau-Y Y-blade
Buchse entretoise bush
Schraube boulon bolt
63-AGM-03
63-AGM-502
63-20120
32 40 48 40 64
16 20 24 20 32
16 20 24 20 32
Y-Messer Buchse Buchse Schraube Scheibe couteau-Y entretoise entretoise boulon rondelle Maschinentyp Y-blade bush bush bolt washer Modèle de machine 63-AGM-03 63-AGM-506 63-AGM-507 63-AGM-505 63-TUR-91 Machine type Entweder... Oder... soit.... Soit... / either... or...
BML190 TML160 TML190 TML225
56 48 56 64
28 24 28 32
28 24 28 32
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! Gruppe 3 Seite 16 La référence d´origine présentée ci-dessus ne sert qu´à la coordination!
groupe/section 3 page 16
The original part-numbers are only indicated for comparison!
56 48 56 64
28 24 28 32
Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved
Ø20 Ø14,5
35
40
12.12
Hammerschlegel und Schlegelmesser
Marteaux broyeurs et couteaux pour débroussailleuses Pruning hammers and flail mover blades
Agromet 60
1
16
Ø30
Ø30,5
3
7
Ø25
4
10
Ø12,5
6
33 60
Ø50
Ø30
5
7
50
2
Best. Nr.: réf. article part-no.
Orig.-Nr. réf. origine orig.-part-no.
Gewicht poids weight
63-IND-69
0,550
Y-Messer couteau-Y / Y-blade
63-IND-103
0,710
3
Mittelbuchse entretoise centrale / central bush
63-IND-900
0,045
4
Außenbuchse entretoise externe / external bush
63-IND-901
0,100
5
Innenbuchse entretoise interne / internal bush
63-IND-902
0,180
6
Schraube mit Sicherungsmutter - 12.9 boulon avec écrou à freinage interne - 12.9 bolt with self-locking nut - 12.9
63-1291
0,105
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
1
32
M12x1,75
Y-Messer couteau-Y / Y-blade
90
6
Ø29,5
53
Ø12,5
Ø24,5
200
2
Agromet
1
Ø16 Ø6
62,5
2
70,5
Ø34,5
®
6 Best. Nr.: réf. article part-no.
40
210
Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding
190
Ø50
Orig.-Nr. réf. origine orig.-part-no.
Gewicht poids weight
1
Schlegel fléau / flail
63-IND-97
0,500
2
Bolzen piton / bolt
63-AGO-63
0,130
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! 12.12 La référence d´origine présentée ci-dessus ne sert qu´à la coordination! The original part-numbers are only indicated for comparison!
Gruppe 3 Seite 17 groupe/section 3 page 17
Hammerschlegel und Schlegelmesser
Marteaux broyeurs et couteaux pour débroussailleuses Pruning hammers and flail mover blades
Agromet
Agromet
63-NEU-01 Schlegel fléau flail
Y-Messer couteau-Y / Y-blade
60
Ø32
63-IND-147
175
175
6
5
35
58
Orig.-Nr. / réf. origine / orig.-part-no.
0,480
Gewicht / poids / weight
Orig.-Nr. / réf. origine / orig.-part-no.
0,340
Gewicht / poids / weight
Agrotec
82
5
42
Y-Messer couteau-Y / Y-blade
2
Schäkel manille shackle
Gerades Messer couteau droit / straight blade
52
Ø14x30
1
2
Ø11,5
40
63-SM-04
48
40
Ø11
Orig.-Nr. réf. origine orig.-part-no.
Best. Nr.: réf. article part-no.
Ø14x30 5
Gewicht poids weight
63-SM-01
0,140
63-MUL-71
0,110
81
1
Orig.-Nr. / réf. origine / orig.-part-no.
0,120
Gewicht / poids / weight
Amazone
Amazone
Amazone
63-AMA-56
®
Vertikutiermesser couteau broyeur / scarify knife
63-AMA-59
Vertikutiermesser couteau broyeur / scarify knife 10
87
87
79
14
10
Mähmesser
couteau de coupe / mower knife 10
17
63-AMA-61
14 2
3
32,5 30
30
Orig.-Nr. / réf. origine / orig.-part-no.
8746000
Gewicht / poids / weight
0,037
27
Orig.-Nr. / réf. origine / orig.-part-no.
8356000
Gewicht / poids / weight
3
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
Agrotec
0,051
Orig.-Nr. / réf. origine / orig.-part-no.
1205200
Gewicht / poids / weight
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! Gruppe 3 Seite 18 La référence d´origine présentée ci-dessus ne sert qu´à la coordination!
groupe/section 3 page 18
The original part-numbers are only indicated for comparison!
0,050
Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved
Ø30
12.12
Hammerschlegel und Schlegelmesser
Marteaux broyeurs et couteaux pour débroussailleuses Pruning hammers and flail mover blades
Amazone
Amazone
63-AMA-57
Amazone
63-AMA-58
Flügelmesser - rechts
63-AMA-60
Flügelmesser - links
couteau ailé - droite / wing-knife right 10
pagaie d’aération / air paddle
10
Ø10
14
14
Orig.-Nr. als paar réf. origine paire / orig.-part-no. pair
60
73
73
50
8756000
28
3
50
M10
3
30
3
30
Orig.-Nr. / réf. origine / orig.-part-no.
990002
0,045
Gewicht / poids / weight
990003
Orig.-Nr. / réf. origine / orig.-part-no.
12042000
0,045
Gewicht / poids / weight
Gewicht / poids / weight
0,123
Amazone
63-AMA-63
63-AMA-64
Flügelmesser geschliffen - rechts couteau ailé - droite / wing-knife right
Flügelmesser geschliffen - links couteau ailé - gauche / wing-knife left
10
73
14
14
10
3
3
30
30
Orig.-Nr. / réf. origine / orig.-part-no.
994123
Gewicht / poids / weight
0,045
994124
0,045
Gewicht / poids / weight
Allgemeine Information
Amazone
30-MU10-2
Orig.-Nr. / réf. origine / orig.-part-no.
informations générales general informations
®
Mutter M10x1,5 - 8.8 écrou / nut
63-AMA-58 63-AMA-57
Linkes Messer couteau gauche left blade
Rechtes Messer couteau droit right blade
Welle dreht rückwärts Orig.-Nr. / réf. origine / orig.-part-no.
DE081
Gewicht / poids / weight
arbre tourne en arrière axe moves backward
0,011
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! 12.12 La référence d´origine présentée ci-dessus ne sert qu´à la coordination! The original part-numbers are only indicated for comparison!
Arbeitsrichtung sens de travaille working direction
Gruppe 3 Seite 19 groupe/section 3 page 19
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
Amazone
Orig.-Nr. / réf. origine / orig.-part-no.
73
Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding
Luftpaddel
couteau ailé - gauche / wing-knife left
Hammerschlegel und Schlegelmesser
Marteaux broyeurs et couteaux pour débroussailleuses Pruning hammers and flail mover blades
AS
AS
63-AS-01
63-AS-03
Mäher-Messer passend für AS 26 couteau-faucheur s´adaptant sur AS 26 mover-blade fitting for AS 26
Mäher-Messer couteau-faucheur mover-blade
630
20,5
20,5
Orig.-Nr. / réf. origine / orig.-part-no.
4145
Gewicht / poids / weight
Orig.-Nr. / réf. origine / orig.-part-no.
1,490
1,280
AS
63-AS-04
63-AS-05
Mäher-Messer couteau-faucheur mover-blade
530
4
498 80
Mäher-Messer couteau-faucheur mover-blade
4
80
80
12,5
33 Orig.-Nr. / réf. origine / orig.-part-no.
5774
Gewicht / poids / weight
Orig.-Nr. / réf. origine / orig.-part-no.
1,200
Gewicht / poids / weight
3753
AS
63-AS-06
®
Mäher-Messer couteau-faucheur mover-blade
80
435
4
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
AS
3077
Gewicht / poids / weight
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
4966
1,170
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! Gruppe 3 Seite 20 La référence d´origine présentée ci-dessus ne sert qu´à la coordination!
groupe/section 3 page 20
The original part-numbers are only indicated for comparison!
1,290
Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved
80
80
4
4
525
12.12
Hammerschlegel und Schlegelmesser
Marteaux broyeurs et couteaux pour débroussailleuses Pruning hammers and flail mover blades
1
70
Ø34,5 Ø12,5
2 1,25
1 2
5
3
33,5
4 14
Ø25
Ø19
18
6
5 6
5
Assaloni
Schlegel / fléau / flail Scheibe Ø35,5 rondelle Ø35,5 / washer Ø35,5 Scheibe Ø34,5 rondelle Ø34,5 / washer Ø34,5 Scheibe Ø18 rondelle Ø18 / washer Ø18 Mutter M12x1,75 écrou M12x1,75 / nut M12x1,75 Schraube M12x1,75 boulon M12x1,75 / bolt M12x1,75
4
Gewicht Orig.-Nr. poids réf. origine orig.-part-no. weight
Best. Nr.: réf. article part-no.
63-AS-07
0,480
63-AS-10
0,008
63-AS-09
0,040
63-AS-12
0,001
63-AS-11
0,018
63-AS-08
0,053
6
Ø20 Ø14,5
10
3 M14x2
11
63-BRN-902
21
Ø20,5
65
2
63-BRN-901
Ø35 63-BRN-01 160
1
40
1
Gedrehtes-Messer couteau torsadé / twisted blade
63-BRN-01
0,462
2
Buchse entretoise / bush
63-BRN-901
0,037
3
Schraube mit Sicherungsmutter-10.9 boulon avec écrou à freinage interne-10.9 bolt with self-locking nut-10.9
63-BRN-902
0,122
Avant Tecno Oy 63-AVA-91
Orig.-Nr. Gewicht réf. origine poids orig.-part-no. weight
Best. Nr.: réf. article part-no.
Avant Tecno Oy 63-IND-416
®
Winkelmesser couteau équerre / L-blade
Mäher-Messer / couteau-faucheur / mower-blade
35
21
Ø14
Ø8
Ø6
Ø12,5
49
39
40 113
60
5
120 520
47
Orig.-Nr. / réf. origine / orig.-part-no. Orig.-Nr. / réf. origine / orig.-part-no.
A33102
Gewicht / poids / weight
1,160
A47872
Gewicht / poids / weight
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! 12.12 La référence d´origine présentée ci-dessus ne sert qu´à la coordination! The original part-numbers are only indicated for comparison!
0,190
Gruppe 3 Seite 21 groupe/section 3 page 21
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
63-BRN-901
5
Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding
190
M12x1,75
Ø18 Ø12
3 6
Ø19,5
Ø35,5 Ø18,3
1,5
5
AS
Hammerschlegel und Schlegelmesser
Marteaux broyeurs et couteaux pour débroussailleuses Pruning hammers and flail mover blades
Avant Tecno Oy 63-AVA-92
Mäher-Messer / couteau-faucheur / mower-blade
Ø6
Ø8
40
84
49
Ø12,5
120 61 5
A33205
Orig.-Nr. / réf. origine / orig.-part-no.
Gewicht / poids / weight
1,380
Abb. rechte Ausführung fig. modèle droit ill. right model
13
Ø30
Best. Nr.: réf. article part-no.
45
Orig.-Nr. réf. origine orig.-part-no.
BCS
1
Mulchmesser couteau broyeur / comminution blade
2
Buchse entretoise / bush
3
Schraube mit Sicherungsmutter-8.8 boulon avec écrou à freinage interne-8.8 bolt with self-locking nut-8.8
Becchio & Mandrile 63-RM-46
®
2,500
li/ga/le
63-BAM-02
0,045
63-1875
0,190
63-RM-4-20
Serie FALLOW
Hammerschlegel marteau broyeur pruning hammer
50
30
63-BAM-01-L
Becchio & Mandrile
Serie TS
Hammerschlegel marteau broyeur pruning hammer
Y-Messer couteau-Y / Y-blade
Gewicht poids weight
63-BAM-01-R re/dr/ri
105
63-BCS-20
75
M18x2,5
1
10
3
Ø30
Ø18
2
90
390
26
Ø12,5
20,5
40
R=
R=
18
0
110
4
100
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
BAMS
37
115
Orig.-Nr. / réf. origine / orig.-part-no.
93581
Gewicht / poids / weight
0,098
120
Orig.-Nr. / réf. origine / orig.-part-no.
CL280
Gewicht / poids / weight
1,450
Orig.-Nr. / réf. origine / orig.-part-no.
F141
Gewicht / poids / weight
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! Gruppe 3 Seite 22 La référence d´origine présentée ci-dessus ne sert qu´à la coordination!
groupe/section 3 page 22
The original part-numbers are only indicated for comparison!
1,313
Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved
21
5 60
12.12
Hammerschlegel und Schlegelmesser
Marteaux broyeurs et couteaux pour débroussailleuses Pruning hammers and flail mover blades
Becchio & Mandrile Serie MEDIUM
63-RM-4
Hammerschlegel marteau broyeur pruning hammer
Hammerschlegel marteau broyeur pruning hammer
40
40 16,5
R= 90
R= 110
16,5
120
120
Orig.-Nr. / réf. origine / orig.-part-no.
1,150
Becchio & Mandrile
1,350
Gewicht / poids / weight
Becchio & Mandrile 63-ZZZ-02
63-ZZZ-01
Y-Messer couteau-Y / Y-blade
Ø21
Schlegel fléau flail
Orig.-Nr. / réf. origine / orig.-part-no.
40 Ø14x30
7
43
70
Orig.-Nr. / réf. origine / orig.-part-no.
1,000
Gewicht / poids / weight
Becchio & Mandrile 63-ZZZ-04
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
0,260
Becchio & Mandrile 63-BEM-05
®
Gerades Messer couteau droit straight blade 40
107
8
Becchio & Mandrile 63-NOB-05
Gerades Messer couteau droit / straight blade
40
Ø19,5
Y-Messer couteau-Y / Y-blade
60 Ø16,5
Ø25,5 10
15
204
115
108
15
57
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
0,410
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
0,450
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! 12.12 La référence d´origine présentée ci-dessus ne sert qu´à la coordination! The original part-numbers are only indicated for comparison!
0,920
Gruppe 3 Seite 23 groupe/section 3 page 23
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
TM152
Gewicht / poids / weight
205
Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding
63-RM-8
Becchio & Mandrile
Hammerschlegel und Schlegelmesser
Marteaux broyeurs et couteaux pour débroussailleuses Pruning hammers and flail mover blades
Becchio & Mandrile
Becchio & Mandrile 63-PEG-36
Gerades Messer couteau droit 60 straight blade
Ø25
205
75
Orig.-Nr. / réf. origine / orig.-part-no.
Orig.-Nr. / réf. origine / orig.-part-no.
0,450
Gewicht / poids / weight
Becchio & Mandrile
Becchio & Mandrile
63-OMA-05 Schlegel fléau flail 75
0,700
Gewicht / poids / weight
63-BEM-04
Y-Messer couteau-Y / Y-blade
44
60
Y-Messer couteau-Y / Y-blade 40
Ø25,5
26
8
190
8
100
Ø16,5 12
50
50
Orig.-Nr. / réf. origine / orig.-part-no.
1,330
Gewicht / poids / weight
Orig.-Nr. / réf. origine / orig.-part-no.
0,720
Gewicht / poids / weight
Orig.-Nr. / réf. origine / orig.-part-no.
0,450
Gewicht / poids / weight
Berry ®
55 30
40
36
Ø14x33
Ø14,5x35
97
39 45
Orig.-Nr. / réf. origine / orig.-part-no.
DB 353
Gewicht / poids / weight
0,180
Ø13
100
5 8
Best. Nr.: réf. article part-no.
1
Y-Messer couteau-Y / Y-blade
63-BER-51
2
Schäkel manille shackle
63-BOM-75
Orig.-Nr. réf. origine orig.-part-no.
Gewicht poids weight
DB 48
0,150
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! Gruppe 3 Seite 24 La référence d´origine présentée ci-dessus ne sert qu´à la coordination!
groupe/section 3 page 24
2
16,5
1
Y-Messer couteau-Y / Y-blade
79
Berry
63-BER-52
Becchio & Mandrile
63-PEG-35
112
183
8
8
30
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
Ø25,5
204
Schlegel fléau flail
The original part-numbers are only indicated for comparison!
0,260
Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved
63-ZZZ-41
12.12
Hammerschlegel und Schlegelmesser
Marteaux broyeurs et couteaux pour débroussailleuses Pruning hammers and flail mover blades
Berti
Berti
63-RM-801
63-RM-93
Hammerschlegel marteau broyeur pruning hammer
Hammerschlegel marteau broyeur pruning hammer
20,5 31
79,5
R1 15
R85
55
69,5
Orig.-Nr. / réf. origine / orig.-part-no.
Orig.-Nr. / réf. origine / orig.-part-no.
0,700
Gewicht / poids / weight
Berti
63-BRT-13
63-BRT-14
Winkelmesser couteau équerre / L-blade
Gerades Messer couteau droit straight blade
Ø29
50
8
8
113
198
Ø25,5
70
Orig.-Nr. / réf. origine / orig.-part-no.
0,750
Gewicht / poids / weight
Berti
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
0,300
Berti
Berti
63-RM-6 Hammerschlegel marteau broyeur pruning hammer
63-RM-74
63-RM-6-20
®
Hammerschlegel marteau broyeur pruning hammer
Hammerschlegel marteau broyeur pruning hammer
40 20,5
137
95
137
137
Orig.-Nr. / réf. origine / orig.-part-no.
AP-00891
Gewicht / poids / weight
1,600
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
16,5
40
R= 97
40
R= 97
16,5
1,430
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! 12.12 La référence d´origine présentée ci-dessus ne sert qu´à la coordination! The original part-numbers are only indicated for comparison!
1,820
Gruppe 3 Seite 25 groupe/section 3 page 25
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
Berti
60
1,810
Gewicht / poids / weight
R=
Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding
40
Hammerschlegel und Schlegelmesser
Marteaux broyeurs et couteaux pour débroussailleuses Pruning hammers and flail mover blades
Berti SW24
SW27
2
2
M16x2
R=
98
28
M16x2
40
16,5
80
100
40
137
Orig.-Nr. réf. origine orig.-part-no.
Gewicht poids weight
AP-00889
1,080
1
Hammerschlegel marteau broyeur / pruning hammer
63-RM-30
2
Schraube mit Sicherungsmutter-10.9 boulon avec écrou à freinage interne-10.9 bolt with self-locking nut-10.9
63-16101
0,220
63-1680
0,170
Berti
Berti
63-BRT-04
63-BRT-03 Gerades Messer couteau droit / straight blade
Y-Messer couteau-Y / Y-blade
60
60
Ø28,5
Ø28,5
8
205
205
10
49
0,870
Berti
Berti
Berti
63-BRT-07
®
Y-Messer couteau-Y / Y-blade
60
0,655
63-SAU-02
Y-Messer couteau-Y / Y-blade 50
Ø28,5 8
Ø25,5
40 8
68
48
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
0,765
Buchse entretoise / bush
108
63-BRT-06
Gewicht / poids / weight
Ø21
Gewicht / poids / weight
Orig.-Nr. / réf. origine / orig.-part-no.
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
0,400
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! Gruppe 3 Seite 26 La référence d´origine présentée ci-dessus ne sert qu´à la coordination!
groupe/section 3 page 26
Ø28
Orig.-Nr. / réf. origine / orig.-part-no.
205
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
Best. Nr.: réf. article part-no.
The original part-numbers are only indicated for comparison!
0,080
Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved
1
12.12
Hammerschlegel und Schlegelmesser
Marteaux broyeurs et couteaux pour débroussailleuses Pruning hammers and flail mover blades
Berti Ø28,5
Ø30
2 10
1 Ø55
Orig.-Nr. réf. origine orig.-part-no.
Best. Nr.: réf. article part-no.
1
Schlegel fléau / flail
2
Scheibe rondelle washer
25
30
Gewicht poids weight
63-BRT-08
0,340
63-BRT-09
0,120
60
Ø28,5 8
3 M20x2,5
53
90
193
1
52
40
2
Ø28
Orig.-Nr. réf. origine orig.-part-no.
Best. Nr.: réf. article part-no.
Gewicht poids weight
1
Hammerschlegel marteau broyeur / pruning hammer
63-BER-01
0,685
2
Buchse entretoise / bush
63-SAU-02
0,080
3
Schraube mit Sicherungsmutter-8.8 boulon avec écrou à freinage interne-8.8 bolt with self-locking nut-8.8
63-2090
0,330
Bomford ® 80
19,5
Ø19
45
2 Ø13
1
74
60
1/2” UNF
133 35
3
Orig.-Nr. réf. origine orig.-part-no.
Gewicht poids weight
63-RM-19
03.958.01
0,715
63-BOM-63
03.437.01
0,080
63-12133
03.675.26
0,135
Best. Nr.: réf. article part-no.
65 R=
1
Hammerschlegel marteau broyeur / pruning hammer
2
Buchse entretoise / bush
3
Schraube mit Sicherungsmutter-8.8 boulon avec écrou à freinage interne-8.8 bolt with self-locking nut-8.8
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! 12.12 La référence d´origine présentée ci-dessus ne sert qu´à la coordination! The original part-numbers are only indicated for comparison!
Gruppe 3 Seite 27 groupe/section 3 page 27
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
Berti
Ø21
Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding
175
6
Hammerschlegel und Schlegelmesser
Marteaux broyeurs et couteaux pour débroussailleuses Pruning hammers and flail mover blades
Bomford
Bomford
63-BOM-65
1
Y-Messer couteau-Y / Y-blade
35
2
Ø14,5x35 47,5 22
110
3
Ø13
41
18
31
Orig.-Nr. / réf. origine / orig.-part-no.
18
21,5
0,070
Bomford 63-RM-48
Best. Nr.: réf. article part-no.
Orig.-Nr. réf. origine orig.-part-no.
Gewicht poids weight
1
Y-Messer couteau-Y / Y-blade
63-BOM-57 09.528.01
0,220
2
Schäkel manille / shackle
63-BOM-73 09.518.01
0,230
3
Buchse entretoise / bush
63-BOM-91
0,040
4
Schraube - 10.9 boulon - 10.9 / bolt - 10.9
63-BOM-93 05.775.10
0,150
5
Mutter - gedrückt écrou - embouti nut - pressed
38
26
60
75
Orig.-Nr. / réf. origine / orig.-part-no.
63-BOM-94 05.968.06
Bomford
0,027
Bomford
Buchse entretoise / bush
0,850
Bomford
63-2091
®
7314366
Gewicht / poids / weight
63-BOM-75 Schäkel manille / shackle
Schraube 10.9 boulon 10.9 / bolt 10.9
55 30
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
0,020
Ø13
53
M20x2,5
90
16,5
Ø26,9 Ø21
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
0,360
Orig.-Nr. / réf. origine / orig.-part-no.
7191332
Gewicht / poids / weight
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! Gruppe 3 Seite 28 La référence d´origine présentée ci-dessus ne sert qu´à la coordination!
groupe/section 3 page 28
79
63-BOM-66
Hammerschlegel marteau broyeur pruning hammer
R1 35
5
19,8
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
14
Gewicht / poids / weight Ø16 Ø24
M14x1,5
M14x1,5
3012615
3
95
4
The original part-numbers are only indicated for comparison!
0,260
Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved
Ø10,5
76
113
Ø15,5
8
12.12
Hammerschlegel und Schlegelmesser
Marteaux broyeurs et couteaux pour débroussailleuses Pruning hammers and flail mover blades
Bomford
Bomford
63-ORS-09
Ø10,5
Ø19
Ø25
Schäkel manille / shackle 49 22,5
21,5 16,5
8
Orig.-Nr. réf. origine orig.-part-no.
Gewicht poids weight
1
Schlegel fléau / flail
63-IND-112
0618901
0,450
2
Buchsen entretoise / bush
63-ZZZ-26
06.192.02
0,050
Ø13
56
Best. Nr.: réf. article part-no.
40
Orig.-Nr. / réf. origine / orig.-part-no.
7390013
0,200
Gewicht / poids / weight
15
13
85
57
Best. Nr.: réf. article part-no.
3
Ø16,5
Orig.-Nr. réf. origine orig.-part-no.
Gewicht poids weight
63-BOM-84
02.902.01
0,550
71.901.06
0,200
1
Hammerschlegel marteau broyeur pruning hammer
2
Schäkel manille / shackle
63-BOM-76
3
Buchse entretoise / bush
63-ZZZ-24
Bomford
0,055
Bomford
63-BOM-80
® Ø7
1
5/16”
32
2
Ø8
135
11
Hammerschlegel marteau broyeur pruning hammer 33
23
1
Messer mit Kette couteau avec chaîne / blade with chain
2
Schraube mit Sicherungsmutter-8.8 boulon avec écrou à freinage interne-8.8 bolt with self-locking nut-8.8
Best. Nr.: réf. article part-no.
Orig.-Nr. réf. origine orig.-part-no.
63-BOM-54 63-51632
Gewicht poids weight
0,325 03.675.22
0,020
R1 10
32
100
10
39,5
Ø10
60
72
1
35
25,5
Ø25
2
15, 5
54
64
Orig.-Nr. / réf. origine / orig.-part-no.
7191320
Gewicht / poids / weight
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! 12.12 La référence d´origine présentée ci-dessus ne sert qu´à la coordination! The original part-numbers are only indicated for comparison!
0,580
Gruppe 3 Seite 29 groupe/section 3 page 29
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
Bomford
42
Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding
2
26
128
Ø21
1
Hammerschlegel und Schlegelmesser
Marteaux broyeurs et couteaux pour débroussailleuses Pruning hammers and flail mover blades
Bomford 2
Ø9,5
70
3 135
1 34
5/16”
32
3
11
Best. Nr.: réf. article part-no.
1
Y-Messer mit 3-gliedr. Kette (RK 2 1/2 B) couteau-Y avec chaîne à 3 maillons (RK 2 1/2 B) Y-blade with 3 link-chain (RK 2 1/2B)
63-BOM-51
2
lose Klinge lame seule / blade only
63-BOM-60
3
Schraube mit Sicherungsmutter-8.8 boulon avec écrou à freinage interne-8.8 bolt with self-locking nut-8.8
Orig.-Nr. réf. origine orig.-part-no.
Gewicht poids weight
01.086.06
0,180 0,170
63-51632
03.675.22
0,020
Orig.-Nr. réf. origine orig.-part-no.
Gewicht poids weight
01.086.06
0,180
41 16
10
1
46
3
Ø13,5
88
40
Best. Nr.: réf. article part-no.
1
Brigade-Messer couteau-Brigade Brigade-blade
63-BOM-56
2
Schäkel manille / shackle
63-BOM-71
3
Schäkel manille / shackle
63-BOM-72
37
Bomford
Typ Merlin
0,170 05.895.01
0,150
Bomford ®
2 1
40
R=
110
16,5
120
1
Hammerschlegel marteau broyeur / pruning hammer
2
Schraube mit Sicherungsmutter-10.9 boulon avec écrou à freinage interne-10.9 bolt with self-locking nut-10.9
40
Best. Nr.: réf. article part-no.
63-BOM-81 Hammerschlegel marteau broyeur pruning hammer
90
33
M16x2
Orig.-Nr. réf. origine orig.-part-no.
Gewicht poids weight
63-RM-25
1,300
63-1690
0,200
26
R1 10
Ø8
46
2
45
Ø15
8,5
30
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
Bomford
54
64
Orig.-Nr. / réf. origine / orig.-part-no.
7198344
Gewicht / poids / weight
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! Gruppe 3 Seite 30 La référence d´origine présentée ci-dessus ne sert qu´à la coordination!
groupe/section 3 page 30
The original part-numbers are only indicated for comparison!
0,615
Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved
Ø6,6
12.12
Hammerschlegel und Schlegelmesser
Marteaux broyeurs et couteaux pour débroussailleuses Pruning hammers and flail mover blades
Bomford
Bomford
63-3895
80
Schraube mit Sicherungsmutter - 8.8 boulon avec écrou à freinage interne - 8.8 bolt with self-locking nut - 8.8
1
2
26
Ø25,5
47,5
24
3
71
95
3/8”
Ø15,2
6 R= 63
Orig.-Nr. / réf. origine / orig.-part-no.
3
Ø15
0,070
Gewicht / poids / weight
96
4
17
M14x1,5
1
Hammerschlegel marteau broyeur / pruning hammer
2
Buchse entretoise / bush
63-RM-45
Orig.-Nr. réf. origine orig.-part-no.
Gewicht poids weight
03958.01
0,840
63-BOM-64
Y-Messer couteau-Y / Y-blade 50
Ø27
0,150
143
45
Best. Nr.: réf. article part-no.
6
Schraube
3
Schraube mit Sicherungsmutter-10.9 boulon avec écrou à freinage interne-10.9 bolt with self-locking nut-10.9
4
Schraube mit Sicherungsmutter-10.9 boulon avec écrou à freinage interne-10.9 bolt with self-locking nut-10.9
63-BOM-92
05.775.10 Mutter
0,180
50
05.968.06 63-14140
Orig.-Nr. / réf. origine / orig.-part-no.
0,210
7190315
Gewicht / poids / weight
0,310
Bomford ® 44
3
SW22
20
105
1
15
M14x1,5 17
55
71
2
Ø14
Ø19,6
35
Ø30
23,5
1
Y-Messer couteau-Y / Y-blade
2
Buchse entretoise / bush
3
Schraube mit Sicherungsmutter-10.9 boulon avec écrou à freinage interne-10.9 bolt with self-locking nut-10.9
Best. Nr.: réf. article part-no.
63-RM-34
Orig.-Nr. réf. origine orig.-part-no.
Gewicht poids weight
7770713
0,820
63-SPH-91
0,070
63-14115
0,176
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! 12.12 La référence d´origine présentée ci-dessus ne sert qu´à la coordination! The original part-numbers are only indicated for comparison!
Gruppe 3 Seite 31 groupe/section 3 page 31
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
140
Bomford
63-CON-52
M14x2
R1
Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding
37
Hammerschlegel und Schlegelmesser
Marteaux broyeurs et couteaux pour débroussailleuses Pruning hammers and flail mover blades
Bomford
Bomford 46
8,5
63-850
2
Schraube mit Sicherungsmutter - 8.8 boulon avec écrou à freinage interne - 8.8 bolt with self-locking nut - 8.8
Ø15
45
6
Ø13,5
3
22
Ø24 Ø16
26,5
Ø15
Ø10,5
25,5
4
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
5
63-51638
85 32
M10x1,5
Best. Nr.: réf. article part-no.
Orig.-Nr. réf. origine orig.-part-no.
Gewicht poids weight
1
Y-Messer couteau-Y / Y-blade
63-BOM-53
0281201
0,150
2
Schäkel manille / shackle
63-BOM-72 05.895.01
0,150
3
Außenbuchse entretoise externe / external bush
63-BOM-61 02.807.01
0,050
4
Innenbuchse entretoise interne / internal bush
63-BOM-62 02.801.01
0,020
5
Schraube mit Sicherungsmutter-10.9 boulon avec écrou à freinage interne-10.9 bolt with self-locking nut-10.9
03.675.25
0,075
63-1085
Schraube mit Sicherungsmutter - 8.8 boulon avec écrou à freinage interne - 8.8 bolt with self-locking nut - 8.8
5/16”
38 22
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
Bomford
63-BOM-77
®
Schäkel manille / shackle 34
25,5
14
9
13
Orig.-Nr. / réf. origine / orig.-part-no.
71.901.75
Gewicht / poids / weight
0,200
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! Gruppe 3 Seite 32 La référence d´origine présentée ci-dessus ne sert qu´à la coordination!
groupe/section 3 page 32
0,030
Bomford
60
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
50
M8x1,25
33
The original part-numbers are only indicated for comparison!
0,024
Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved
Ø15,5x40 95
41
1
12.12
Hammerschlegel und Schlegelmesser
Marteaux broyeurs et couteaux pour débroussailleuses Pruning hammers and flail mover blades
Bomford 2,5 Ø24
26,5
45
Orig.-Nr. réf. origine orig.-part-no.
Gewicht poids weight
02.959.01
0,440
76
22
Ø13
7
21,5
85
8
M10x1,5
32 96 17
Best. Nr.: réf. article part-no.
63-RM-17
1
Hammerschlegel marteau broyeur / pruning hammer
2
Schäkel manille / shackle
63-BOM-72 05.895.01
0,150
3
Schäkel manille / shackle
63-BOM-73 09.518.01
0,240
4
Außenbuchse entretoise externe / external bush
63-BOM-61
02.807.01
0,050
5
Innenbuchse entretoise interne / internal bush
63-BOM-62 02.801.01
0,020
6
Scheibe rondelle/ washer
7
Buchse entretoise / bush
8
Schraube mit Sicherungsmutter-10.9 boulon avec écrou à freinage interne-10.9 bolt with self-locking nut-10.9
9
Schraube mit Sicherungsmutter-10.9 boulon avec écrou à freinage interne-10.9 bolt with self-locking nut-10.9
Ø15 M14x1,5
Ø15
Ø10,5
3
9
25,5
63-9000
0,030
63-BOM-91 02.807.01 63-1085
03.675.25
63-BOM-92
05.775.10
0,040 0,075
Schraube Mutter
0,180
05.968.06
Neue Ausführung Nouveau modèle / New model C E
Neue Ausführung Nouveau modèle / New model
®
Alte Ausführung Ancien modèle / Old model
C
D E
C
D
B
D E
B A
A - 1x 63-RM-17 B - 1x 63-BOM-72 C - 1x 63-BOM-61 D - 1x 63-BOM-92 E - 2x 63-9000
B
A - 1x 63-RM-17 B - 1x 63-BOM-73 C - 1x 63-BOM-91 D - 1x 63-BOM-92 E - 2x 63-9000
A
A
A - 1x 63-RM-17 B - 1x 63-BOM-72 C - 1x 63-BOM-61 D - 2x 63-BOM-62 E - 1x 63-1085
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! 12.12 La référence d´origine présentée ci-dessus ne sert qu´à la coordination! The original part-numbers are only indicated for comparison!
Gruppe 3 Seite 33 groupe/section 3 page 33
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
70 32
5
47,5
Ø16 Ø24
4
85
41
Ø24 Ø16
Ø13,5
Ø15,5
Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding
6
2
Ø15
8,5
46
Ø15
42 16
1
Hammerschlegel und Schlegelmesser
Marteaux broyeurs et couteaux pour débroussailleuses Pruning hammers and flail mover blades
Bomford
63-BOM-83
27
26
Hammerschlegel marteau broyeur pruning hammer 26
38,5
2
Ø35
R= 10
2
R =1 14
Ø15,5
45,5
Ø26,5
62
Orig.-Nr. / réf. origine / orig.-part-no.
3
4
46399.01
3 95
M14x1,5
Bomford
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
63-BER-52
5 Best. Nr.: réf. article part-no.
Orig.-Nr. réf. origine orig.-part-no.
Gewicht poids weight
46398.01
0,550
1
Hammerschlegel marteau broyeur / pruning hammer
2
Innenbuchse entretoise interne / internal bush
63-BOM-96 09.894.01
0,090
3
Federring rondelle-ressort / split washer
63-BOM-95 05.282.08
0,008
4
Schraube - 10.9 boulon - 10.9 / bolt - 10.9
63-BOM-93 05.775.10
0,150
5
Mutter - gedrückt écrou - embouti nut - pressed
63-BOM-94 05.968.06
63-RM-80
0,027
Y-Messer couteau-Y / Y-blade 36 Ø14,5x35 8
45
Orig.-Nr. / réf. origine / orig.-part-no.
43092.01
Gewicht / poids / weight
®
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! Gruppe 3 Seite 34 La référence d´origine présentée ci-dessus ne sert qu´à la coordination!
groupe/section 3 page 34
97
14
0,750
Gewicht / poids / weight
18
M14x1,5
68
The original part-numbers are only indicated for comparison!
0,180
Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved
1
Ø25,5
38
Bomford
12.12
Hammerschlegel und Schlegelmesser
Marteaux broyeurs et couteaux pour débroussailleuses Pruning hammers and flail mover blades
Breviglieri
Breviglieri
Hammerschlegel marteau broyeur pruning hammer
1
40
54
Ø13x26
40
80
5
Ø10
16,5
137
Orig.-Nr. / réf. origine / orig.-part-no.
0056123
1,600
Gewicht / poids / weight
Orig.-Nr. réf. origine orig.-part-no.
Best. Nr.: réf. article part-no.
37
R= 95
Gewicht poids weight
1
Y-Messer couteau-Y / Y-blade
63-MAL-24
0,120
2
Schäkel manille shackle
63-MAL-25
0,100
1
2
Ø25,5
63
Ø24,9
125
8
68
Ø16,7
60
Orig.-Nr. réf. origine orig.-part-no.
Best. Nr.: réf. article part-no.
1
Y-Messer couteau-Y / Y-blade
63-IND-94
2
Buchse entretoise / bush
63-BRE-01
Breviglieri
0,470 0,140
55205
Breviglieri
63-NOB-04
Breviglieri
63-BRE-17
®
Gerades Messer couteau droit / straight blade 60
Gewicht poids weight
Y-Messer couteau-Y / Y-blade
60
Ø25,5
63-NOB-05
Y-Messer couteau-Y / Y-blade
60
Ø25,5 10
10
204
210
10
Ø25,5
69
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
0,850
57
Orig.-Nr. / réf. origine / orig.-part-no.
0055202
Gewicht / poids / weight
1,000
Orig.-Nr. / réf. origine / orig.-part-no.
55202
Gewicht / poids / weight
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! 12.12 La référence d´origine présentée ci-dessus ne sert qu´à la coordination! The original part-numbers are only indicated for comparison!
0,920
Gruppe 3 Seite 35 groupe/section 3 page 35
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
Breviglieri
204
Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding
2
34
Ø12,5
63-RM-6
Hammerschlegel und Schlegelmesser
Marteaux broyeurs et couteaux pour débroussailleuses Pruning hammers and flail mover blades
Breviglieri
Gerades Messer couteau droit / straight blade 60
Breviglieri
63-BRE-21
63-BRE-18
Y-Messer couteau-Y / Y-blade 40
Ø16,5
40 10
Ø16,5
110
Ø25,5
Y-Messer couteau-Y / Y-blade
10
210
10
52
Orig.-Nr. / réf. origine / orig.-part-no.
0,910
Gewicht / poids / weight
0,350
Gewicht / poids / weight
Orig.-Nr. / réf. origine / orig.-part-no.
Bruni
63-IND-130
63-BRN-01
Y-Messer couteau-Y / Y-blade
60
Ø28,5
8
173
10
10
160
Ø25,5
Gedrehtes-Messer couteau torsadé Ø20,5 twisted blade
225
Y-Messer couteau-Y / Y-blade
0,360
Gewicht / poids / weight
Brouchard
63-BRE-37 60
Orig.-Nr. / réf. origine / orig.-part-no.
62
40
55
Orig.-Nr. / réf. origine / orig.-part-no.
T0100031
0,805
Gewicht / poids / weight
Orig.-Nr. / réf. origine / orig.-part-no.
TR0004BF6
Gewicht / poids / weight
0,810
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
0,450
Bruni ®
Ø20,5 5
1
2
Ø20
12
Ø12,5
45
150
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
Breviglieri
54
Best. Nr.: réf. article part-no.
42 M12x1,75
50 32
3
Orig.-Nr. réf. origine orig.-part-no.
1
Y-Messer couteau-Y / Y-blade
63-BRN-02
0,204
2
Buchse entretoise / bush
63-BRN-03
0,020
3
Schraube mit Sicherungsmutter-10.9 boulon avec écrou à freinage interne-10.9 bolt with self-locking nut-10.9
63-1250-1
0,070
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! Gruppe 3 Seite 36 La référence d´origine présentée ci-dessus ne sert qu´à la coordination!
groupe/section 3 page 36
Gewicht poids weight
The original part-numbers are only indicated for comparison!
Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved
63-BRE-20
125
Breviglieri
12.12
Hammerschlegel und Schlegelmesser
Marteaux broyeurs et couteaux pour débroussailleuses Pruning hammers and flail mover blades
Bruni
Bruni
63-ZZZ-42 10
63-BRN-07
Y-Messer couteau-Y / Y-blade 40
Ø12,5
Ø20,5
58
54
Orig.-Nr. / réf. origine / orig.-part-no.
0,560
160
165
8
55
Gewicht / poids / weight
10
45
Ø27,5
50
Gedrehtes-Messer couteau torsadé twisted blade
185
50
Gedrehtes-Messer couteau torsadé twisted blade
Orig.-Nr. / réf. origine / orig.-part-no.
Orig.-Nr. / réf. origine / orig.-part-no.
0,480
Gewicht / poids / weight
0,580
Gewicht / poids / weight
40
1
Ø16
18
M16x1,5
125
6
2
50
50
3
Cabe (Nuova Cabe) 63-CAE-05
®
1
Y-Messer couteau-Y / Y-blade
2
Sicherungsmutter écrou à freinage interne / self-locking nut
3
Schraube - 10.9 boulon - 10.9 bolt - 10.9
Cabe (Nuova Cabe) 63-CAE-06
Y-Messer couteau-Y / Y-blade 50
60
0,230
63-1016
0,035
63-BUC-900
0,110
Cabe (Nuova Cabe) 63-RM-4-20
Ø28,5
20,5
40 7
92
R=
110
100
8
63-PRO-02
Hammerschlegel marteau broyeur pruning hammer
Y-Messer couteau-Y / Y-blade
Ø20
Gewicht poids weight
155
M16x1,5
Orig.-Nr. réf. origine orig.-part-no.
Best. Nr.: réf. article part-no.
57
120
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
0,440
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
0,485
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! 12.12 La référence d´origine présentée ci-dessus ne sert qu´à la coordination! The original part-numbers are only indicated for comparison!
1,313
Gruppe 3 Seite 37 groupe/section 3 page 37
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
Bucher
20
Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding
Bruni
63-BRN-06
Hammerschlegel und Schlegelmesser
Marteaux broyeurs et couteaux pour débroussailleuses Pruning hammers and flail mover blades
63-RM-5-16
63-RM-5-20
Hammerschlegel marteau broyeur pruning hammer
70
40 20,5
2,000
Cabe (Nuova Cabe) 63-RM-8-20
Hammerschlegel marteau broyeur pruning hammer
Orig.-Nr. / réf. origine / orig.-part-no.
2,000
Gewicht / poids / weight
Cabe (Nuova Cabe) 63-CAE-04 60
Orig.-Nr. / réf. origine / orig.-part-no.
222022001
Cabe (Nuova Cabe) 63-RM-18-20
Ø28,5 70
7
4
20
10 R=
57
118
1,120
Cabe (Nuova Cabe) ®
180
Orig.-Nr. / réf. origine / orig.-part-no.
000185
0,740
Gewicht / poids / weight
Cabe (Nuova Cabe) 63-ORS-02
Y-Messer couteau-Y / Y-blade
Orig.-Nr. / réf. origine / orig.-part-no.
Cabe (Nuova Cabe) 63-AGM-21
Schäkel manille / shackle
Y-Messer couteau-Y / Y-blade 35
Ø14,5 5
52
90
6
Ø12,5
48
Ø14x30
2,300
Gewicht / poids / weight
80
Orig.-Nr. / réf. origine / orig.-part-no.
63-SIC-10
20,5
230
40
Gewicht / poids / weight
1,150
Gewicht / poids / weight
Hammerschlegel marteau broyeur pruning hammer
Y-Messer couteau-Y / Y-blade
R= 90
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
120
185
Orig.-Nr. / réf. origine / orig.-part-no.
40
16,5
R= 88
R= 88 185
Gewicht / poids / weight
63-RM-8
Hammerschlegel marteau broyeur pruning hammer
70
16,5
Cabe (Nuova Cabe)
R= 90
Hammerschlegel marteau broyeur pruning hammer
Cabe (Nuova Cabe)
Ø11
43
25
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
0,210
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
0,125
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! Gruppe 3 Seite 38 La référence d´origine présentée ci-dessus ne sert qu´à la coordination!
groupe/section 3 page 38
The original part-numbers are only indicated for comparison!
0,120
Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved
Cabe (Nuova Cabe)
12.12
Hammerschlegel und Schlegelmesser
Marteaux broyeurs et couteaux pour débroussailleuses Pruning hammers and flail mover blades
Calderoni
63-CAE-13
63-RM-10-20
63-AGM-01
Hammerschlegel marteau broyeur pruning hammer
Y-Messer couteau-Y / Y-blade 40
Y-Messer couteau-Y / Y-blade 60
Ø20,5
55
Ø25,5
20,5 10
R=
10 0
110
8
Calderoni
Calderoni
63-AGM-02
Ø25,5
63-AGM-03
Y-Messer couteau-Y / Y-blade 35
Y-Messer couteau-Y / Y-blade 40 Ø20,5
Ø14,5
8
150
80
5
10
25
Orig.-Nr. / réf. origine / orig.-part-no.
0,610
Gewicht / poids / weight
Caroni
0,650
Gewicht / poids / weight
Calderoni
63-AGM-21
Gerades Messer couteau droit / straight blade 60
1,850
Gewicht / poids / weight
Orig.-Nr. / réf. origine / orig.-part-no.
52
Orig.-Nr. / réf. origine / orig.-part-no.
0,120
Gewicht / poids / weight
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
0,300
Caroni
63-MAL-15
®
Y-Messer couteau-Y / Y-blade
Y-Messer couteau-Y / Y-blade 40
40
Ø14x30 5
Ø14,5 5
42
40
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
138
63-SM-01
0,140
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
0,220
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! 12.12 La référence d´origine présentée ci-dessus ne sert qu´à la coordination! The original part-numbers are only indicated for comparison!
Gruppe 3 Seite 39 groupe/section 3 page 39
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
0,270
Orig.-Nr. / réf. origine / orig.-part-no.
120
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
60
150
53
82
Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding
Calderoni
150
Cabe (Nuova Cabe)
Hammerschlegel und Schlegelmesser
Marteaux broyeurs et couteaux pour débroussailleuses Pruning hammers and flail mover blades
Caroni
Caroni
63-MUL-71
63-CRN-01
Schäkel manille / shackle
Y-Messer couteau-Y / Y-blade
48
124
Ø11,5
Ø12,5
52
5
Ø11 39
Orig.-Nr. / réf. origine / orig.-part-no.
0,110
Gewicht / poids / weight
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
0,200
40
48
Best. Nr.: réf. article part-no.
84
52
5
1
2
Ø11,5
Ø13x26
Ø11 31
4
17
7/16”
20
7/16”
84
82
3
Orig.-Nr. réf. origine orig.-part-no.
Gewicht poids weight
1
Y-Messer couteau-Y / Y-blade
63-SMA-51
0,120
2
Schäkel manille / shackle
63-MUL-71
0,110
3
Schraube mit Sicherungsmutter-10.9 boulon avec écrou à freinage interne-10.9 bolt with self-locking nut-10.9
63-71682
0,080
4
Schraube mit Sicherungsmutter-10.9 boulon avec écrou à freinage interne-10.9 bolt with self-locking nut-10.9
63-71684
0,080
Carroy et Giraudon
1
3 Ø8
Ø2
Ø3,5
26
Ø7
22
3
20
5 18,
Ø8
23,5
Ø8,5
2
18
®
105
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
Carroy et Giraudon
Best. Nr.: réf. article part-no.
Orig.-Nr. réf. origine orig.-part-no.
Gewicht poids weight
1
Y-Messer couteau-Y / Y-blade
63-TOR-52
02.EFM
0,085
2
Bolzen mit Splint piton avec goupille / bolt with split-pin
63-TOR-81
02.A20.8
0,011
3
Bolzen mit Stift piton avec goupille / bolt with pin
63-TOR-82
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! Gruppe 3 Seite 40 La référence d´origine présentée ci-dessus ne sert qu´à la coordination!
groupe/section 3 page 40
The original part-numbers are only indicated for comparison!
0,010
Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved
40
12.12
Hammerschlegel und Schlegelmesser
Marteaux broyeurs et couteaux pour débroussailleuses Pruning hammers and flail mover blades
Carroy et Giraudon 1
2 6
M12x1,75
Best. Nr.: réf. article part-no.
37
Orig.-Nr. réf. origine orig.-part-no.
Gewicht poids weight
26264
0,175
1
Y-Messer couteau-Y / Y-blade
63-CAR-52
2
Schraube - 10.9 boulon / bolt
63-UNI-900
0,068
3
Schraube - 10.9 boulon / bolt
M1298010
0,017
Carroy et Giraudon 63-CAR-51
1
2
Ø14,5x34
M12x1,75
6
45 23,5
Gewicht poids weight
16039
0,160
1
Y-Messer couteau-Y / Y-blade
2
Schraube - 10.9 boulon / bolt
63-UNI-900
0,068
3
Schraube - 10.9 boulon / bolt
M1298010
0,017
63-UNI-02
Celli
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
0,134
Celli
63-CEL-29
®
Y-Messer couteau-Y / Y-blade
Gerades Messer couteau droit / straight blade 40
Ø16,5
Ø16,5
8 115
10
125
50
Ø11
53
Orig.-Nr. réf. origine orig.-part-no.
Ø11
Best. Nr.: réf. article part-no.
36
63-CEL-25
Schäkel manille / shackle
3
M12x1,75 27 47
41
53
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
0,470
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
0,245
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! 12.12 La référence d´origine présentée ci-dessus ne sert qu´à la coordination! The original part-numbers are only indicated for comparison!
Gruppe 3 Seite 41 groupe/section 3 page 41
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
Carroy et Giraudon
96
Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding
93
Ø13
3
M12x1,75 27 47
40
Hammerschlegel und Schlegelmesser
Marteaux broyeurs et couteaux pour débroussailleuses Pruning hammers and flail mover blades
Celli
63-CEL-26
63-FLN-02
Gerades Messer couteau droit / straight blade
63-RM-5-16 Hammerschlegel marteau broyeur pruning hammer
Y-Messer couteau-Y / Y-blade 40
Ø16,5
10
70
120
8
16,5
R= 88
Ø17
115
50
Chabas
51
185
Orig.-Nr. / réf. origine / orig.-part-no.
Orig.-Nr. / réf. origine / orig.-part-no.
0,430
Chabas 63-M-1
Chabas
63-RM-3
Hammerschlegel marteau broyeur pruning hammer
63-RM-3-20
Hammerschlegel marteau broyeur pruning hammer
70
Hammerschlegel marteau broyeur pruning hammer
70
70
16,5
20,5
155
170
Orig.-Nr. / réf. origine / orig.-part-no.
85
R=
88
85
16,5
155
Orig.-Nr. / réf. origine / orig.-part-no.
2,000
Gewicht / poids / weight
2,000
Gewicht / poids / weight
Chabas
R=
Orig.-Nr. / réf. origine / orig.-part-no.
1,500
Gewicht / poids / weight
Gewicht / poids / weight
1,500
Claas
80
60
4 40
M16x2
3
3 Ø35
8
2 Ø25
1
28
Ø17
®
Ø25,5
Ø16,5
60
245
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
0,290
Gewicht / poids / weight
R=
Gewicht / poids / weight
Orig.-Nr. / réf. origine / orig.-part-no.
Best. Nr.: réf. article part-no.
Orig.-Nr. réf. origine orig.-part-no.
Gewicht poids weight
01049060
0,960
1
Y-Messer couteau-Y / Y-blade
63-FEI-02
2
Buchse entretoise / bush
63-FEI-63
0,054
3
Scheibe rondelle / washer
63-FEI-64
0,020
4
Schraube mit Sicherungsmutter-10.9 boulon avec écrou à freinage interne-10.9 bolt with self-locking nut-10.9
63-1660
0,150
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! Gruppe 3 Seite 42 La référence d´origine présentée ci-dessus ne sert qu´à la coordination!
groupe/section 3 page 42
The original part-numbers are only indicated for comparison!
Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved
Celli
12.12
Hammerschlegel und Schlegelmesser
Marteaux broyeurs et couteaux pour débroussailleuses Pruning hammers and flail mover blades
Clemens
63-FEI-03
63-CLE-01
Winkelmesser couteau équerre / L-blade
63-CON-52
Y-Messer couteau-Y / Y-blade
Y-Messer couteau-Y / Y-blade
40
50
Ø22,5
Ø25,5
Ø27
250
110
8
8
6 73
50
75
Orig.-Nr. / réf. origine / orig.-part-no.
104.903.0
Gewicht / poids / weight
1,150
Orig.-Nr. / réf. origine / orig.-part-no.
0,330
Gewicht / poids / weight
7190315
Gewicht / poids / weight
0,310
Mc Connel 63-BOM-80
Hammerschlegel marteau broyeur pruning hammer
42 16
3
33
23
Ø20
70 32
1
Orig.-Nr. / réf. origine / orig.-part-no.
25
Ø12
R1 10
85
41
54
64
Orig.-Nr. / réf. origine / orig.-part-no.
7191320
4
47
2
Gewicht / poids / weight
0,580
84
26
Mc Connel
17
63-CON-91
®
Scheibe Ø16,5 rondelle Ø16,5 / washer Ø16,5 Best. Nr.: réf. article part-no.
1
Hammerschlegel marteau broyeur / pruning hammer
2
Orig.-Nr. réf. origine orig.-part-no.
Gewicht poids weight
63-RM-17
0,440
Schäkel manille / shackle
63-ROU-72
0,120
3
Innenbuchse entretoise interne / internal bush
63-ROU-62
0,035
4
Schraube mit Sicherungsmutter-10.9 boulon avec écrou à freinage interne-10.9 bolt with self-locking nut-10.9
63-71684
0,080
Ø27 Ø16,5 3,5
54
7/16”
Ø11
Orig.-Nr. / réf. origine / orig.-part-no.
27.0100.206
Gewicht / poids / weight
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! 12.12 La référence d´origine présentée ci-dessus ne sert qu´à la coordination! The original part-numbers are only indicated for comparison!
0,008
Gruppe 3 Seite 43 groupe/section 3 page 43
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
Mc Connel
11
Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding
60
Mc Connel
143
Claas
Hammerschlegel und Schlegelmesser
Marteaux broyeurs et couteaux pour débroussailleuses Pruning hammers and flail mover blades
Mc Connel 42 16
84
70 32
3
85
41
16,5
38 15,5
57
Ø11
1
Hammerschlegel marteau broyeur / pruning hammer
2
Schäkel manille / shackle
3
Schraube mit Sicherungsmutter - 10.9 boulon avec écrou à freinage interne - 10.9 bolt with self-locking nut - 10.9
0,440
63-BOM-74
7190080
0,185
Mc Connel
Hammerschlegel marteau broyeur pruning hammer
Hammerschlegel marteau broyeur pruning hammer
Hammerschlegel marteau broyeur pruning hammer
63-RM-801
58
40
60
55
63-RM-78
20,5
26
37
12
5
15
5
Orig.-Nr. / réf. origine / orig.-part-no.
0,760
Gewicht / poids / weight
Mc Connel
0,700
Gewicht / poids / weight
Mc Connel
Schäkel manille / shackle
73-90-276
63-BER-52
Y-Messer couteau-Y / Y-blade 49 22,5
41
56
Ø13
Y-Messer couteau-Y / Y-blade 36
Ø15,5x40
Ø14,5x35
6
8
33
Orig.-Nr. / réf. origine / orig.-part-no.
7390013
Gewicht / poids / weight
0,200
Orig.-Nr. / réf. origine / orig.-part-no.
7190166
Gewicht / poids / weight
0,150
45
Orig.-Nr. / réf. origine / orig.-part-no.
7190177
Gewicht / poids / weight
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! Gruppe 3 Seite 44 La référence d´origine présentée ci-dessus ne sert qu´à la coordination!
groupe/section 3 page 44
0,950
Gewicht / poids / weight
Mc Connel
63-BOM-53
®
Orig.-Nr. / réf. origine / orig.-part-no.
95
63-ORS-09
60
Orig.-Nr. / réf. origine / orig.-part-no.
97
68
R=
R1
7 R=
26
0,156
63-1684
Mc Connel
63-RM-800
Gewicht poids weight
63-RM-17
Mc Connel
16,5
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
2
Orig.-Nr. réf. origine orig.-part-no.
Best. Nr.: réf. article part-no.
21
5/8”UNF
The original part-numbers are only indicated for comparison!
0,180
Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved
1
12.12
Hammerschlegel und Schlegelmesser
Marteaux broyeurs et couteaux pour débroussailleuses Pruning hammers and flail mover blades
Mc Connel
63-BOM-75
Schäkel manille / shackle
2
1
38
26
Ø25
Mc Connel
39,5
79
Ø13
60
Orig.-Nr. / réf. origine / orig.-part-no.
7191332
Best. Nr.: réf. article part-no.
75
Gewicht poids weight
Hammerschlegel marteau broyeur / pruning hammer
63-RM-48
7314366
0,850
2
Buchse entretoise / bush
63-ZZZ-24
7314233
0,055
Mc Connel M16x1,5
24
15,5
1
M16x1,5
110
2 R=
Best. Nr.: réf. article part-no.
120
35
25,5
15
Orig.-Nr. réf. origine orig.-part-no.
Gewicht poids weight
1026026
1,300
1
Hammerschlegel marteau broyeur / pruning hammer
63-RM-25
2
Scraube - 10.9 boulon - 10.9 / bolt - 10.9
63-SEP-91
0,180
3
Mutter / écrou / nut
63-SEP-92
0,028
Mc Connel
Ø10
13
3
60
16,5
90
Schäkel manille / shackle
22
40
63-BOM-76
26,5
Orig.-Nr. / réf. origine / orig.-part-no.
71.901.06
Gewicht / poids / weight
0,200
Mc Connel M16x1,5
M16x1,5
2 Best. Nr.: réf. article part-no.
90
3
Ø26,9 Ø21
Orig.-Nr. réf. origine orig.-part-no.
Gewicht poids weight
1026027
1,100
1
Hammerschlegel marteau broyeur / pruning hammer
63-RM-26
2
Scraube - 10.9 boulon - 10.9 / bolt - 10.9
63-SEP-91
0,180
3
Mutter / écrou / nut
63-SEP-92
0,028
19,8
R =9 120
63-BOM-66
26,5
Buchse entretoise / bush
0
16,5
15,5
22
®
24
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! 12.12 La référence d´origine présentée ci-dessus ne sert qu´à la coordination! The original part-numbers are only indicated for comparison!
0,020
Gruppe 3 Seite 45 groupe/section 3 page 45
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
Mc Connel
40
Orig.-Nr. réf. origine orig.-part-no.
1
0,260
Gewicht / poids / weight
1
Ø16,5
R1 35
16,5
Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding
55 30
Hammerschlegel und Schlegelmesser
Marteaux broyeurs et couteaux pour débroussailleuses Pruning hammers and flail mover blades
Mc Connel
Cosma
63-2091
Cosma
63-FEI-15
63-ORS-02 Schäkel manille / shackle
Y-Messer couteau-Y / Y-blade
Schraube 10.9 boulon 10.9 / bolt 10.9 40
Ø14x29
Ø11 43
Orig.-Nr. / réf. origine / orig.-part-no.
0,360
Gewicht / poids / weight
63-BRN-01 Gedrehtes-Messer couteau torsadé twisted blade
0,260
Gewicht / poids / weight
Cosma
Ø20,5
50
0,125
Gewicht / poids / weight
63-RM-11-20 Hammerschlegel marteau broyeur pruning hammer
Y-Messer couteau-Y / Y-blade
10
Orig.-Nr. / réf. origine / orig.-part-no.
Cosmag
63-CSM-03
Ø20,5
60
Orig.-Nr. / réf. origine / orig.-part-no.
0,450
Gewicht / poids / weight
Cosmag
63-M-42-A Hammerschlegel marteau broyeur pruning hammer
150 Orig.-Nr. / réf. origine / orig.-part-no.
0,430
Gewicht / poids / weight
Orig.-Nr. / réf. origine / orig.-part-no.
1,730
Gewicht / poids / weight
Desvoys
63-RM-4
63-RM-4-20
Hammerschlegel marteau broyeur pruning hammer
Hammerschlegel marteau broyeur pruning hammer
40
60
R= 88
38
Desvoys ®
20,5
145
160
8
40
16,5
20,5
40
R=
R= 110
80
120
150
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
110
20,5
R=
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
Cosma
Orig.-Nr. / réf. origine / orig.-part-no.
1,920
120
Orig.-Nr. / réf. origine / orig.-part-no.
6061700
Gewicht / poids / weight
1,350
Orig.-Nr. / réf. origine / orig.-part-no.
497
Gewicht / poids / weight
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! Gruppe 3 Seite 46 La référence d´origine présentée ci-dessus ne sert qu´à la coordination!
groupe/section 3 page 46
The original part-numbers are only indicated for comparison!
1,440
Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved
53
M20x2,5
52
90
105
8
Ø12,5
48
12.12
Hammerschlegel und Schlegelmesser
Marteaux broyeurs et couteaux pour débroussailleuses Pruning hammers and flail mover blades
Doppstadt
Y-Messer couteau-Y / Y-blade
Ø12,5
Ø25,5
6
215
Orig.-Nr. / réf. origine / orig.-part-no.
2
Buchse entretoise / bush
63-DOP-62 127040050 0,025
3
Schraube mit Sicherungsmutter-10.9 boulon avec écrou à freinage interne-10.9 bolt with self-locking nut-10.9
40 Ø22
Ø13
6
0,070
Mutter
01120068
Bezeichnung
Anzahl
63-IND-49-R
3 3 3 3 3 3
63-IND-49-L 63-DOP-82 63-DOP-81 63-DOP-61 63-DOP-91
Ø13,5
Ø35
4 Ø13,5
Ø35
63-1250-1
oder/ ou / or
3
6
Schraube
01100065
Ein Satz für Maschinentyp DRM120 besteht aus: Un ensemble pour machine type DRM120 se compose de : A set for machinetype DRM120 consists of :
Ø24
1
Gewicht poids weight
63-DOP-51 127040106 0,120
2
8
Orig.-Nr. réf. origine orig.-part-no.
Best. Nr.: réf. article part-no.
Y-Messer couteau-Y / Y-blade
Doppstadt Abb. rechte Ausführung fig. modèle droit ill. right model 70
3
1
0,700
Gewicht / poids / weight
32
13
30
62
280
55 64
5 M12x1,75
® 20
Best. Nr.: réf. article part-no.
63-IND-49-R re/dr/ri 63-IND-49-L li/ga/le
Orig.-Nr. réf. origine orig.-part-no.
Gewicht poids weight
Dragone
63-DRG-07 Y-Messer couteau-Y / Y-blade
101880
0,870
1
Schlegel fléau / flail
2
Buchse entretoise / bush
63-DOP-61
0,070
3
Scheibe rondelle / washer
63-DOP-81
0,030
4
Scheibe mit versenkter Bohrung rondelle à alésage fraisé countersunk hole washer
63-DOP-82
0,025
5
Schraube mit Sicherungsmutter-10.9 boulon avec écrou à freinage interne-10.9 bolt with self-locking nut-10.9
63-DOP-91 03.675.25
0,075
50 Ø18
8
120
Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding
8
50
M12x1,75
Ø25
Ø20
2
63
60
1
35
84
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! 12.12 La référence d´origine présentée ci-dessus ne sert qu´à la coordination! The original part-numbers are only indicated for comparison!
0,430
Gruppe 3 Seite 47 groupe/section 3 page 47
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
63-WER-02
Ø19,5
Desvoys
Hammerschlegel und Schlegelmesser
Marteaux broyeurs et couteaux pour débroussailleuses Pruning hammers and flail mover blades
Dragone
63-RM-36 Hammerschlegel marteau broyeur pruning hammer
1
2
75
130
M18x2,5
R= 1
00
16
53
75
18
100
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
1,340
Hammerschlegel marteau broyeur / pruning hammer
3
Schraube mit Sicherungsmutter-10.9 boulon avec écrou à freinage interne-10.9 bolt with self-locking nut-10.9
Dragone
Dragone
63-DRG-11
63-DRG-05
Y-Messer couteau-Y / Y-blade
40
Ø18,5
8
Y-Messer couteau-Y / Y-blade
40
Ø16,5
Ø18,5 10
10 30 R
R
55
72
Orig.-Nr. / réf. origine / orig.-part-no.
0,480
Gewicht / poids / weight
55
38
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
0,340
Dragone
Orig.-Nr. / réf. origine / orig.-part-no.
0,350
Gewicht / poids / weight
Dragone 2
1
7 R=
16,5
für Maschine: pour machine for machine
Ø16 Ø10 14,5
® 13
38
L100 - L130 - L160
63-DRG-09 Y-Messer couteau-Y / Y-blade 40
5
78
1
Hammerschlegel marteau broyeur / pruning hammer
2
Buchse entretoise bush
Ø16,5 5
Orig.-Nr. réf. origine orig.-part-no.
Gewicht poids weight
19202652
0,260
63-DRG-91 19202451
0,013
Best. Nr.: réf. article part-no.
63-RM-71
41
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! Gruppe 3 Seite 48 La référence d´origine présentée ci-dessus ne sert qu´à la coordination!
groupe/section 3 page 48
100
50
1,340 0,330
63-18130
110
Y-Messer couteau-Y / Y-blade
63-RM-36-18 00003048
Dragone
63-DRG-04
140
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
2
30
3045/46
Orig.-Nr. Gewicht réf. origine poids orig.-part-no. weight
Best. Nr.: réf. article part-no.
110
R= 100
100
The original part-numbers are only indicated for comparison!
0,160
Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved
Dragone
12.12
Hammerschlegel und Schlegelmesser
Marteaux broyeurs et couteaux pour débroussailleuses Pruning hammers and flail mover blades
Dragone
Dücker
63-NOB-05
1
Y-Messer couteau-Y / Y-blade Ø25,5
66
M12x1,75
10
204
10
Orig.-Nr. / réf. origine / orig.-part-no.
1
Schlegel fléau / flail
2
Schraube mit Sicherungsmutter-12.9 boulon avec écrou à freinage interne-12.9 bolt with self-locking nut-12.9
0,920
Gewicht / poids / weight
für Maschine: pour machine for machine
RSM
Orig.-Nr. réf. origine orig.-part-no.
Best. Nr.: réf. article part-no.
52
57
32
90
2
Gewicht poids weight
63-GYR-01
0,255
63-1291
0,115
M14x1,5
2
3 12
Ø14
M14x1,5
25
24
70
205
12
1
120
Orig.-Nr. réf. origine orig.-part-no.
Best. Nr.: réf. article part-no.
100
Gewicht poids weight
1
Schlegel fléau / flail
63-IND-196 945000555 3,230
2
Sicherung barre de sécurité / safety
63-IND-66-2
991
0,200
3
Schraube mit Sicherungsgewinde - 8.8 boulon avec filet à freinage interne - 8.8 bolt with self-locking thread - 8.8
63-1425
992
0,050
Dücker ® 1
2
8
Ø12,5
M12x1,75
30
120
1
Schlegel fléau / flail
2
Schraube mit Sicherungsmutter-8.8 boulon avec écrou à freinage interne-8.8 bolt with self-locking nut-8.8
Orig.-Nr. réf. origine orig.-part-no.
Gewicht poids weight
63-DÜC-51
444
2,000
63-1230
445
0,050
Best. Nr.: réf. article part-no.
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! 12.12 La référence d´origine présentée ci-dessus ne sert qu´à la coordination! The original part-numbers are only indicated for comparison!
Gruppe 3 Seite 49 groupe/section 3 page 49
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
Dücker
200
Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding
60
Ø20 Ø13
55
Hammerschlegel und Schlegelmesser
Marteaux broyeurs et couteaux pour débroussailleuses Pruning hammers and flail mover blades
Dücker
3 18H11 10
135
145
1
25
M18x1,5 80
M18x1,5
18
4
Ø28
84
Ø18,2
Best. Nr.: réf. article part-no.
Orig.-Nr. réf. origine orig.-part-no.
Gewicht poids weight
63-IND-517
945000220 1,400 92100011
1
Schlegel fléau / flail
2
Buchse entretoise / bush
63-DÜC-912
3
Schraube - 10.9 boulon - 10.9 / bolt - 10.9
63-DÜC-910 901018005 0,320
4
Sicherungsmutter - 10.9 écrou à freinage interne - 10.9 self-locking nut - 10.9
51-1042
0,230
900018008 0,045
Dücker ®
M20x1,5
2
1
20
3
110
20H11
Best. Nr.: réf. article part-no.
Orig.-Nr. réf. origine orig.-part-no.
Gewicht poids weight
5
M20x1,5
28
20,5
54
R= 10
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
2
130
2
Hammerschlegel marteau broyeur / pruning hammer
3
Schraube - 10.9 boulon - 10.9 / bolt - 10.9
4
Sicherungsmutter - 10.9 écrou à freinage interne - 10.9 self-locking nut - 10.9
63-RM-92
945000661 1,440
63-DÜC-911 901020068 0,350 51-20RMU 900020018 0,060
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! Gruppe 3 Seite 50 La référence d´origine présentée ci-dessus ne sert qu´à la coordination!
groupe/section 3 page 50
The original part-numbers are only indicated for comparison!
Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved
Ø28,5
12.12
Hammerschlegel und Schlegelmesser
Marteaux broyeurs et couteaux pour débroussailleuses Pruning hammers and flail mover blades
Dücker Ø28 Ø16,5
2
1 50
R74
Ø30 Ø17
3 3
69
5
18
M16x1,5
M16x1,5
Orig.-Nr. réf. origine orig.-part-no.
Gewicht poids weight
63-RM-76
A-2762
0,748
48983000
0,166
Best. Nr.: réf. article part-no.
1
Hammerschlegel marteau broyeur / pruning hammer
2
Buchse entretoise / bush
63-DÜC-907
3
Scheibe rondelle / washer
63-DÜC-908
4
Schraube - 10.9 boulon - 10.9 / bolt - 10.9
63-DUC-913 90101.16054 0,190
5
Sicherungsmutter écrou à freinage interne self-locking nut
0,010
63-1016
0,030
Dücker ®
M12x1,75
3
53
Ø23 Ø13
M12x1,75
18 5 R5 61
2
92
1
Orig.-Nr. réf. origine orig.-part-no.
Best. Nr.: réf. article part-no.
Gewicht poids weight
1
Hammerschlegel marteau broyeur / pruning hammer
63-RM-98
945000902 0,330
2
Mutter écrou / nut
63-AS-11
0,018
3
Schraube - 12.9 boulon - 12.9 bolt - 12.9
63-1292
0,110
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! 12.12 La référence d´origine présentée ci-dessus ne sert qu´à la coordination! The original part-numbers are only indicated for comparison!
Gruppe 3 Seite 51 groupe/section 3 page 51
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
100
4
25
Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding
53
28,5
Hammerschlegel und Schlegelmesser
Marteaux broyeurs et couteaux pour débroussailleuses Pruning hammers and flail mover blades
Dücker Ø13
2 90
für Maschine: pour machine for machine
RSM
32
M12x1,75
70
10
Orig.-Nr. réf. origine orig.-part-no.
Best. Nr.: réf. article part-no.
50
Gewicht poids weight
63-IND-378 945000901 0,380
1
Schlegel fléau / flail
2
Schraube mit Sicherungsmutter-12.9 boulon avec écrou à freinage interne-12.9 bolt with self-locking nut-12.9
63-1291
0,115
16
40
2
Ausführung mit Schäkel 54mm Modèle avec manille 54mm Model with shackle 54mm C
54
75
26
Ø12,5
1
Ø11
87
D
3
40
Ø12,5
50
B
66
39 19
12,5
Ø11 54
6
Ø13
4
16,5
®
24 Ø30
5
A
A - 1x 63-RM-35 B - 1x 63-DÜC-901 C - 1x 63-DÜC-902 D - 1x 63-DÜC-903
80
M12x1,75
43
Ø13,5
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
Dücker
Orig.-Nr. réf. origine orig.-part-no.
Gewicht poids weight
63-RM-35
880000
0,430
881 000
0,120
Best. Nr.: réf. article part-no.
1
Hammerschlegel marteau broyeur / pruning hammer
2
Schäkel manille / shackle
63-DÜC-901
3
Schäkel manille / shackle
63-DÜC-900
0,140
4
Schäkel manille / shackle
63-DUC-914
0,140
5
Buchse entretoise / bush
63-DÜC-902
883 000
0,070
6
Schraube mit Sicherungsmutter-10.9 boulon avec écrou à freinage interne-10.9 bolt with self-locking nut-10.9
63-DÜC-903
882000
0,100
Ausführung mit Schäkel 66mm Modèle avec manille 66mm Model with shackle 66mm C D
B
A - 1x 63-RM-35 B - 1x 63-DÜC-900 C - 1x 63-DÜC-902 D - 1x 63-DÜC-903
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! Gruppe 3 Seite 52 La référence d´origine présentée ci-dessus ne sert qu´à la coordination!
groupe/section 3 page 52
The original part-numbers are only indicated for comparison!
A
Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved
1
12.12
Hammerschlegel und Schlegelmesser
Marteaux broyeurs et couteaux pour débroussailleuses Pruning hammers and flail mover blades
Dücker
Dücker
63-DÜC-01
Neues Modell nouveau modèle new model
Schlegel kpl. mit Sicherung und Schrauben fléau compl. avec barre de sécurité et boulons flail compl. with safety and bolts
63-IND-66 Schlegel kpl. mit Sicherung und Schrauben fléau compl. avec barre de sécurité et boulons flail compl. with safety and bolts
Altes Modell ancien modèle old model
63-IND-66-2
63-DÜC-01-1
63-1425 63-IND-66-2
63-IND-66-1
Orig.-Nr. / réf. origine / orig.-part-no.
Orig.-Nr. / réf. origine / orig.-part-no.
1,950
Gewicht / poids / weight
1,780
Gewicht / poids / weight
M14x1,5
2
M14x1,5
1 Ø14,5 120
70
0 12
Orig.-Nr. réf. origine orig.-part-no.
Gewicht poids weight
63-DÜC-01-1
990
1,700
63-IND-66-2
991
0,200
63-1425
992
0,050
Orig.-Nr. réf. origine orig.-part-no.
Gewicht poids weight
Best. Nr.: réf. article part-no.
100
10
für SMT 13/15 pour SMT 13/15 for SMT 13/15
3
12 25
Neues Modell nouveau modèle new model
1
Schlegel fléau / flail
2
Sicherung barre de sécurité / safety
3
Schraube mit Sicherungsgewinde-8.8 boulon avec filet à freinage interne-8.8 bolt with self-locking thread-8.8
Dücker ®
3
M14x1,5
12
2 1
100
Ø14,5
10
70
120
M14x1,5
25
Altes Modell ancien modèle old model
Best. Nr.: réf. article part-no.
1
Schlegel fléau / flail
63-IND-66-1
990
1,530
2
Sicherung barre de sécurité / safety
63-IND-66-2
991
0,200
3
Schraube mit Sicherungsgewinde-8.8 boulon avec filet à freinage interne-8.8 bolt with self-locking thread-8.8
63-1425
992
0,050
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! 12.12 La référence d´origine présentée ci-dessus ne sert qu´à la coordination! The original part-numbers are only indicated for comparison!
Gruppe 3 Seite 53 groupe/section 3 page 53
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
Dücker
120
Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding
63-1425
Hammerschlegel und Schlegelmesser
Marteaux broyeurs et couteaux pour débroussailleuses Pruning hammers and flail mover blades
Dücker
1
Best. Nr.: réf. article part-no.
Ø11,5
50
77
4 18
M12x1,75
Gewicht poids weight
1
Schlegel fléau / flail
63-DÜC-904 945000900 0,290
2
Schäkel manille / shackle
63-DÜC-905
3
Buchse entretoise / bush
63-DÜC-906 010100006 0,030
4
Schraube mit Sicherungsmutter - 10.9 boulon avec écrou à freinage interne - 10.9 bolt with self-locking nut - 10.9
Dücker
0,140
63-1277
0,045
Dücker
32
90
1
Orig.-Nr. réf. origine orig.-part-no.
Best. Nr.: réf. article part-no.
39
Gewicht poids weight
1
Y-Messer couteau-y / Y-blade
63-DÜC-02 10860000
0,160
2
Buchse entretoise / bush
63-DÜC-91 02527500
0,013
3
Schraube mit Sicherungsmutter-10.9 boulon avec écrou à freinage interne-10.9 bolt with self-locking nut-10.9
63-1250-1
0,070
Dücker
02525300
17
8
150
8
60
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
0,160
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
0,570
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! Gruppe 3 Seite 54 La référence d´origine présentée ci-dessus ne sert qu´à la coordination!
groupe/section 3 page 54
Schlegel fléau / flail
R140
Ø25,5
Ø13
912200891
45 Ø18,5
60
0,100
63-SPH-53
Y-Messer couteau-Y / Y-blade
12,5
901012019
150
Y-Messer couteau-Y / Y-blade 39
Orig.-Nr. / réf. origine / orig.-part-no.
Econ
63-SAU-04
®
M12
Gewicht / poids / weight
Eberle
63-DÜC-909
Schraube mit Sicherungsmutter-10.9 boulon avec écrou à freinage interne-10.9 bolt with self-locking nut-10.9
80
3
6
2
32
Ø18,5
63-1280-1
Ø17,5 Ø12,5
50
M12x1,75
15
40
70
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
Orig.-Nr. réf. origine orig.-part-no.
The original part-numbers are only indicated for comparison!
0,620
Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved
67
90
10
3
für Maschine pour machine / for machine MKL10
16
Ø20
2
Ø20x33
12
Ø12,5
39,5 17
12.12
Hammerschlegel und Schlegelmesser
Marteaux broyeurs et couteaux pour débroussailleuses Pruning hammers and flail mover blades
Epoke 4
Ø28 Ø14
3 100
1/2”UNF
32
1
32
38
69
Ø10
2
Best. Nr.: réf. article part-no.
Orig.-Nr. réf. origine orig.-part-no.
Gewicht poids weight
1
Schlegel fléau / flail
63-EPO-51
406-146
0,230
2
Schäkel manille / shackle
63-EPO-76
406-145
0,140
3
Distanzscheibe rondelle / washer
63-EPO-82 8067-3387
4
Schraube mit Sicherungsmutter-8.8 boulon avec écrou à freinage interne-8.8 bolt with self-locking nut-8.8
63-1264
0,007 0,090
63-EPO-76
63-EPO-82 63-1264
63-EPO-51
38x
63-EPO-76
38x
63-EPO-82
76x
63-1264
38x
63-EPO-51
Epoke ®
1
2
48 26
11,5
66
Ø12,5x32,5
10
Ø11
35
Best. Nr.: réf. article part-no.
Orig.-Nr. réf. origine orig.-part-no.
Gewicht poids weight
1
Schlegel fléau / flail
63-ZAP-29
0,120
2
Schäkel manille shackle
63-ROU-71
0,150
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! 12.12 La référence d´origine présentée ci-dessus ne sert qu´à la coordination! The original part-numbers are only indicated for comparison!
Gruppe 3 Seite 55 groupe/section 3 page 55
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
63-EPO-82
Ein Satz für Maschinentyp UH46 besteht aus: un ensemble pour machine type UH46 se compose de: a set for machinetype UH46 consists of:
97
Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding
10
64
3
Ø11,5x34
Hammerschlegel und Schlegelmesser
Marteaux broyeurs et couteaux pour débroussailleuses Pruning hammers and flail mover blades
Epoke
Epoke
63-EPO-52
42 16
46
8,5
Ø15,5x34
Ø13,5 41
Ø24 Ø16
3
26,5
40
Orig.-Nr. / réf. origine / orig.-part-no.
25,5
0,260
Gewicht / poids / weight Ø15
Ø10,5
4 85
5
Epoke
32
M10x1,5
63-YYY-74
1
Hammerschlegel marteau broyeur / pruning hammer
2
Schäkel manille / shackle
Gewicht poids weight
63-RM-17
0,440
Schäkel manille / shackle
63-BOM-72
0,150
3
Außenbuchse entretoise externe / external bush
63-BOM-61
0,050
4
Innenbuchse entretoise interne / internal bush
63-BOM-62
0,020
5
Schraube mit Sicherungsmutter-10.9 boulon avec écrou à freinage interne-10.9 bolt with self-locking nut-10.9
63-1085
0,075
48
11
26,5 63
Orig.-Nr. réf. origine orig.-part-no.
Best. Nr.: réf. article part-no.
Ø11
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
0,137
Epoke ®
61
1/2” UNF
3
Ø14x38
4
Ø28 Ø14
3
20
120
10
1 40
2 12
42
Best. Nr.: réf. article part-no.
Orig.-Nr. réf. origine orig.-part-no.
Gewicht poids weight
1
Schlegel fléau / flail
63-EPO-53
408-685
0,340
2
Schäkel manille / shackle
63-EPO-72
408-684
0,210
3
Distanzscheibe rondelle / washer
63-EPO-82 8067-3387
0,007
4
Schraube mit Sicherungsmutter-10.9 boulon avec écrou à freinage interne-10.9 bolt with self-locking nut-10.9
63-EPO-83
0,075
74
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
92
10
85
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! Gruppe 3 Seite 56 La référence d´origine présentée ci-dessus ne sert qu´à la coordination!
groupe/section 3 page 56
The original part-numbers are only indicated for comparison!
Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved
45
70 32
Ø15
1
Schlegel fléau flail
2
12.12
Hammerschlegel und Schlegelmesser
Marteaux broyeurs et couteaux pour débroussailleuses Pruning hammers and flail mover blades
Epoke
Epoke Abb. rechte Ausführung fig. modèle droit ill. right model
63-EPO-84
40 Ø22
Ø13
2
70
Buchse entretoise / bush
Ø24
6
3
35
Ø35
8
Ø13,5
1
280
Orig.-Nr. / réf. origine / orig.-part-no.
55
M12x1,75
63-IND-49-R re/dr/ri 63-IND-49-L li/ga/le
20
Orig.-Nr. réf. origine orig.-part-no.
101880
Gewicht poids weight
Epoke
63-ROU-71 Schäkel manille / shackle
0,870
1
Schlegel fléau / flail
2
Buchse entretoise / bush
63-DOP-61
0,070
3
Scheibe rondelle / washer
63-DOP-81
0,030
4
Scheibe mit versenkter Bohrung rondelle à alésage fraisé countersunk hole washer
63-DOP-82
0,025
5
Schraube mit Sicherungsmutter-10.9 boulon avec écrou à freinage interne-10.9 bolt with self-locking nut-10.9
63-DOP-91
0,075
48 26
11,5
66
Best. Nr.: réf. article part-no.
64
5
0,168
Gewicht / poids / weight
Ø11
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
0,150
Epoke Best. Nr.: réf. article part-no.
Schäkel ® manilles / shackles
63-EPO-71 63-EPO-72 63-EPO-74 63-EPO-75 63-EPO-76
L A ØD
L
H
ØD
A
42 42 32 45 38
71 74 83 83 69
11 12 10 10 10
20 18 12 25 18
Orig.-Nr. réf. origine orig.-part-no.
408-684 406-145
Gewicht poids weight
0,180 0,210 0,160 0,160 0,140
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! 12.12 La référence d´origine présentée ci-dessus ne sert qu´à la coordination! The original part-numbers are only indicated for comparison!
Gruppe 3 Seite 57 groupe/section 3 page 57
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
4
Ø13,5
Ø35
6
H
Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding
Ø35 Ø21
Hammerschlegel und Schlegelmesser
Marteaux broyeurs et couteaux pour débroussailleuses Pruning hammers and flail mover blades
Epoke 1
37 17
90
47
24
Ø10,5
2
Ø10
35 38
Ø4,5
95
Ø10
30
65
5 M10x1,5
3
4
46
Ø3,5
6
Best. Nr.: réf. article part-no.
Orig.-Nr. réf. origine orig.-part-no.
Gewicht poids weight
1
Gedrehtes-Messer couteau torsadé / twisted blade
63-EPO-54
0,100
2
Schäkel manille / shackle
63-HAN-71
0,070
3
Schäkel manille / shackle
63-EPO-73
0,080
4
Spezialfederstecker goupille béta spéciale / special spring-pin
63-EPO-81
0,007
5
Schraube - 10.9 boulon - 10.9 / bolt - 10.9
106593110
0,040
6
Sicherungsmutter - 8.8 écrou à freinage interne - 8.8 self-locking nut - 8.8
30-MU10-2
0,010
Epoke
L
Schrauben mit ®Sicherungsmuttern boulons avec écrous à freinage interne bolts with self-locking nuts
Best. Nr.: réf. article part-no.
Gewinde filet thread
L
G
Güte qualité quality
M12x1,75 M12x1,75 M12x1,75
50 60 70
32 32 35
10.9 10.9 10.9
0,070 0,080 0,090
63-1264
1/2“ UNF
64
32
8.8
0,090
63-EPO-83
1/2“ UNF
61
20
10.9
0,075
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! Gruppe 3 Seite 58 La référence d´origine présentée ci-dessus ne sert qu´à la coordination!
groupe/section 3 page 58
Gewicht poids weight
63-1250-1 63-1260-1 63-1270-1
G
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
M10x1,5
The original part-numbers are only indicated for comparison!
Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved
5
10,5
12.12
Hammerschlegel und Schlegelmesser
Marteaux broyeurs et couteaux pour débroussailleuses Pruning hammers and flail mover blades
F.A.E.
F.A.E.
63-SEP-51
63-SEP-52
Hammerschlegel marteau broyeur pruning hammer
Hammerschlegel marteau broyeur pruning hammer
31
78
35,5
80 R=
110 R=
70
75
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
1,630
Orig.-Nr. / réf. origine / orig.-part-no.
Facma
63-RM-69-18
63-RM-69-22
Hammerschlegel marteau broyeur pruning hammer
Hammerschlegel marteau broyeur pruning hammer
18,5
70
22,5
R=1 60
R=1 60
70
160
160
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
2,550
Falc
Orig.-Nr. / réf. origine / orig.-part-no.
2,500
Gewicht / poids / weight
Falc
Falc
63-RM-38
®
63-RM-39
Ø26
Hammerschlegel marteau broyeur pruning hammer
Hammerschlegel marteau broyeur pruning hammer 43
54
16,5
25,5
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
0,470
R=
R=
35
12
100
8
0
63-ZZZ-05 Schlegel fléau flail
2,410
Gewicht / poids / weight
147
90
Orig.-Nr. / réf. origine / orig.-part-no.
42.06.82
Gewicht / poids / weight
2,080
Orig.-Nr. / réf. origine / orig.-part-no.
F450433
Gewicht / poids / weight
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! 12.12 La référence d´origine présentée ci-dessus ne sert qu´à la coordination! The original part-numbers are only indicated for comparison!
1,110
Gruppe 3 Seite 59 groupe/section 3 page 59
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
Facma
160
Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding
58
Hammerschlegel und Schlegelmesser
Marteaux broyeurs et couteaux pour débroussailleuses Pruning hammers and flail mover blades
Falc
63-RM-40
Falc
63-FAL-11
Hammerschlegel marteau broyeur pruning hammer
63-NOB-04
Schlegel fléau flail
Gerades Messer couteau droit / straight blade
37
54
60
Ø14,5
Ø25,5
R= 100
10
155
8
204
25,5
90
103
Orig.-Nr. / réf. origine / orig.-part-no.
66 00 00
1,660
Gewicht / poids / weight
Gewicht / poids / weight
0,850
Falc
63-NOB-05
63-NOB-09
Y-Messer couteau-Y / Y-blade
Buchse entretoise / bush
Ø25,5
54 204
Ø25,5
10
Ø35
60
Orig.-Nr. / réf. origine / orig.-part-no.
0,780
Gewicht / poids / weight
57
Orig.-Nr. / réf. origine / orig.-part-no.
F43.01.51
0,920
Gewicht / poids / weight
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
0,150
Falc ®
3 21
Ø16
1
90
95
12
48 23
14,5
Ø13
20
M14x2
40
2
4
Ø24
Ø16x35
Orig.-Nr. réf. origine orig.-part-no.
Gewicht poids weight
63-VOT-55
F470307
0,320
Best. Nr.: réf. article part-no.
1
Schlegel fléau / flail
2
Schäkel manille / shackle
63-TUR-72
F470301
0,230
3
Buchse entretoise / bush
63-TUR-81
02.807.01
0,040
4
Schraube mit Sicherungsmutter-12.9 boulon avec écrou à freinage interne-12.9 bolt with self-locking nut-12.9
63-TUR-91
73
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
Falc
Orig.-Nr. / réf. origine / orig.-part-no.
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! Gruppe 3 Seite 60 La référence d´origine présentée ci-dessus ne sert qu´à la coordination!
groupe/section 3 page 60
The original part-numbers are only indicated for comparison!
0,150
Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved
Falc
12.12
Hammerschlegel und Schlegelmesser
Marteaux broyeurs et couteaux pour débroussailleuses Pruning hammers and flail mover blades
Falc
63-ZZZ-43
Falconero
Falconero
Hammerschlegel marteau broyeur pruning hammer
Hammerschlegel marteau broyeur pruning hammer
63-RM-10-16
Y-Messer couteau-Y / Y-blade
63-RM-10-20
60
55
20,5
66
150
Orig.-Nr. / réf. origine / orig.-part-no.
0,680
Gewicht / poids / weight
Falconero
150
Orig.-Nr. / réf. origine / orig.-part-no.
1,770
Gewicht / poids / weight
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
1,850
Falconero 63-FLN-03
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
63-FLN-02
Mulchmesser couteau-broyeur / comminution blade 60 Ø25,5
Y-Messer couteau-Y / Y-blade
Ø16,5
8
115
8
285
40
R=
R=
10 0
100
120
10
55
16,5
51
Orig.-Nr. / réf. origine / orig.-part-no.
0,290
Gewicht / poids / weight
Falconero
1,020
Gewicht / poids / weight
Fantini
63-AGM-21
63-FAN-01
®
Y-Messer couteau-Y / Y-blade
60
Y-Messer couteau-Y / Y-blade Ø28,5
Ø14,5 5
8
225
35
Orig.-Nr. / réf. origine / orig.-part-no.
80
Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding
Ø25,5
25 70
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
0,120
60
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
0,740
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! 12.12 La référence d´origine présentée ci-dessus ne sert qu´à la coordination! The original part-numbers are only indicated for comparison!
Gruppe 3 Seite 61 groupe/section 3 page 61
Hammerschlegel und Schlegelmesser
Marteaux broyeurs et couteaux pour débroussailleuses Pruning hammers and flail mover blades
Fehrenbach
63-NOB-05
63-AGM-10
Ø25,5
40
40
Ø14x30
204
10
R=
10 0
8
43 100
Orig.-Nr. / réf. origine / orig.-part-no.
Orig.-Nr. / réf. origine / orig.-part-no.
0,920
Gewicht / poids / weight
Fehrenbach
Orig.-Nr. / réf. origine / orig.-part-no.
0,210
Gewicht / poids / weight
0,450
Fehrenbach 63-RM-2
Hammerschlegel marteau broyeur pruning hammer
Hammerschlegel marteau broyeur / pruning hammer
20,5
63-RM-32
86
21
R=
95
R=
110
16,5
5 15
75
Orig.-Nr. / réf. origine / orig.-part-no.
Orig.-Nr. / réf. origine / orig.-part-no.
0,640
Gewicht / poids / weight
Gewicht / poids / weight
1,800
Fehrenbach ®
M14x1,5
12
2 1
M14x1,5
3 25
Altes Modell ancien modèle old model
100
Ø14,5
120
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
21
90
6
57
Gewicht / poids / weight
Schlegel fléau flail
Y-Messer couteau-Y / Y-blade
Y-Messer couteau-Y / Y-blade
60
Fehrenbach
63-SIC-10
10
70
120
Best. Nr.: réf. article part-no.
Orig.-Nr. réf. origine orig.-part-no.
1
Schlegel fléau / flail
63-IND-66-1
1,530
2
Sicherung barre de sécurité / safety
63-IND-66-2
0,200
3
Schraube mit Sicherungsgewinde-8.8 boulon avec filet à freinage interne-8.8 bolt with self-locking thread-8.8
63-1425
0,050
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! Gruppe 3 Seite 62 La référence d´origine présentée ci-dessus ne sert qu´à la coordination!
groupe/section 3 page 62
Gewicht poids weight
The original part-numbers are only indicated for comparison!
Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved
Fehrenbach
12.12
Hammerschlegel und Schlegelmesser
Marteaux broyeurs et couteaux pour débroussailleuses Pruning hammers and flail mover blades
Fehrenbach
Fehrenbach
63-SAU-04
63-JDE-01 Schlegel fléau flail
10x45°
36
17
Y-Messer couteau-Y / Y-blade
8x45°
60
Ø25,5
6,5
80
60
72
3
Orig.-Nr. / réf. origine / orig.-part-no.
Orig.-Nr. / réf. origine / orig.-part-no.
0,140
Gewicht / poids / weight
Fehrenbach
63-IND-27R re/dr/ri 63-IND-27L li/ga/le
70
Mulchmesser couteau-broyeur comminution blade
Ø25,5 10
70
Mulchmesser couteau-broyeur comminution blade
Ø25,5
200
10
175
Abb. rechts fig. droit ill. right
77
Abb. rechts fig. droit ill. right
63-IND-28R re/dr/ri 63-IND-28L li/ga/le
89
Orig.-Nr. / réf. origine / orig.-part-no. re/dr/ri Orig.-Nr. / réf. origine / orig.-part-no. li/ga/le Gewicht / poids / weight
89
M175R M175L 0,880
Orig.-Nr. / réf. origine / orig.-part-no. re/dr/ri Orig.-Nr. / réf. origine / orig.-part-no. li/ga/le Gewicht / poids / weight
M200R M200L 0,980
Fehrenbach
63-IND-48R re/dr/ri ® 63-IND-48L li/ga/le
70
Ø25,5
Mulchmesser couteau-broyeur comminution blade
10
92
Abb. rechts fig. droit ill. right 89
Orig.-Nr. / réf. origine / orig.-part-no. re/dr/ri Orig.-Nr. / réf. origine / orig.-part-no. li/ga/le Gewicht / poids / weight
M225R M225L 1,140
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! 12.12 La référence d´origine présentée ci-dessus ne sert qu´à la coordination! The original part-numbers are only indicated for comparison!
Gruppe 3 Seite 63 groupe/section 3 page 63
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
Fehrenbach
0,570
77
Gewicht / poids / weight
150
8
225
Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding
Ø14x25
Hammerschlegel und Schlegelmesser
Marteaux broyeurs et couteaux pour débroussailleuses Pruning hammers and flail mover blades
Ferri
63-FEI-04 Y-Messer couteau-Y / Y-blade
63-ORS-02 Schäkel manille / shackle
Y-Messer couteau-Y / Y-blade 40
Ø25,5
48
145
Ø12,5
Ø17x35 8
100
8
52
60
Ferri
63-FEI-47
Ø11 59
73
44
Orig.-Nr. / réf. origine / orig.-part-no.
0,520
Gewicht / poids / weight
Neues Modell nouveau modèle new model
63-FEI-51
0,250
Gewicht / poids / weight
Ferri
Orig.-Nr. / réf. origine / orig.-part-no.
0,125
Gewicht / poids / weight
Neues Modell nouveau modèle new model
63-FEI-52
Gerades Messer couteau droit / straight blade
Y-Messer couteau-Y / Y-blade
60
60
Ø25,5 8
8
150
145
Ø26
50
65
65
Orig.-Nr. / réf. origine / orig.-part-no.
0901003
0,550
Gewicht / poids / weight
Ferri
Orig.-Nr. / réf. origine / orig.-part-no.
0901148
Gewicht / poids / weight
0,500
Ferri
63-ROU-71
Ferri
63-YYY-72
®
63-FEI-45
Schäkel manille / shackle
Schäkel manille / shackle
Y-Messer couteau-Y / Y-blade 40
48 26
11,5
48
Ø16,5 8
54
130
Ø12,5
66
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
Ferri
Orig.-Nr. / réf. origine / orig.-part-no.
Ø12
Ø11
40
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
0,150
Orig.-Nr. / réf. origine / orig.-part-no.
0901031
Gewicht / poids / weight
0,120
Orig.-Nr. / réf. origine / orig.-part-no.
0901146
Gewicht / poids / weight
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! Gruppe 3 Seite 64 La référence d´origine présentée ci-dessus ne sert qu´à la coordination!
groupe/section 3 page 64
The original part-numbers are only indicated for comparison!
0,320
Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved
Fendt
12.12
Hammerschlegel und Schlegelmesser
Marteaux broyeurs et couteaux pour débroussailleuses Pruning hammers and flail mover blades
Ferri
Ferri
63-FEI-46
63-FEI-49 Gerades Messer couteau droit / straight blade
Y-Messer couteau-Y / Y-blade
40
40
Ø16,5x34
6
86
104
8
43
09001049
Gewicht / poids / weight
0,200
Ferri
Orig.-Nr. / réf. origine / orig.-part-no.
0901153
0,160
Gewicht / poids / weight
Ferri
63-RM-8-14
Ferri
63-RM-7-16
Hammerschlegel marteau broyeur pruning hammer
63-NOB-17
Hammerschlegel marteau broyeur / pruning hammer
Gerades Messer couteau droit / straight blade 40
Ø16,5
16,5
22
40 8
R= 10 5
132
14,5
108
120
Orig.-Nr. / réf. origine / orig.-part-no.
0901143
1,150
Gewicht / poids / weight
Ferri
0,780
Gewicht / poids / weight
Ferri
25,5
40
Schlegel 10x45° fléau flail
36
17
8x45° Ø14x25
Ø16,5
6,5
8
15 =1
0,295
63-JDE-01
Y-Messer couteau-Y / Y-blade
41
0901149
Gewicht / poids / weight
Ferri
63-FEI-34
®
Orig.-Nr. / réf. origine / orig.-part-no.
80
Hammerschlegel marteau broyeur pruning hammer
0901134
126
63-RM-20
Orig.-Nr. / réf. origine / orig.-part-no.
R
65
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
60
78
1,120
Orig.-Nr. / réf. origine / orig.-part-no.
0901129
Gewicht / poids / weight
0,350
3
72
Orig.-Nr. / réf. origine / orig.-part-no.
0901072
Gewicht / poids / weight
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! 12.12 La référence d´origine présentée ci-dessus ne sert qu´à la coordination! The original part-numbers are only indicated for comparison!
0,140
Gruppe 3 Seite 65 groupe/section 3 page 65
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
Orig.-Nr. / réf. origine / orig.-part-no.
R= 90
Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding
Ø14x30
Hammerschlegel und Schlegelmesser
Marteaux broyeurs et couteaux pour débroussailleuses Pruning hammers and flail mover blades
Ferri
Ferri
63-RM-18
Ferri
63-FEI-27
Hammerschlegel marteau broyeur pruning hammer
63-RM-47
Hammerschlegel marteau broyeur pruning hammer
Hammerschlegel marteau broyeur / pruning hammer
Ø25
70
43
16,5
Gewicht / poids / weight
2,350
Orig.-Nr. / réf. origine / orig.-part-no.
0901010
63-FEI-60
0901048
Gerades Messer couteau droit / straight blade 40
40
Ø12,5
Ø12,5 6
42
56
0901146
Gewicht / poids / weight
0,380
Ferri
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
0,250
Ferri
Y-Messer couteau-Y / Y-blade
Orig.-Nr. / réf. origine / orig.-part-no.
63-FEI-30
Gerades Messer couteau droit / straight blade
40
Y-Messer couteau-Y / Y-blade 60
40
Ø14x30
Ø25,5
Ø14x30
8
6
80
6
64
42
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
0,160
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
0,120
Orig.-Nr. / réf. origine / orig.-part-no.
0901086
Gewicht / poids / weight
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! Gruppe 3 Seite 66 La référence d´origine présentée ci-dessus ne sert qu´à la coordination!
groupe/section 3 page 66
0,220
Gewicht / poids / weight
Ferri
63-FEI-58
®
130
40
50
Orig.-Nr. / réf. origine / orig.-part-no.
6
130
130
8
1,270
Gewicht / poids / weight
63-FEI-55
Y-Messer couteau-Y / Y-blade
Ø16
63-FEI-57
Orig.-Nr. / réf. origine / orig.-part-no.
Ferri
63-FEI-54
Y-Messer couteau-Y / Y-blade 50
1,000
Gewicht / poids / weight
Ferri
82
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
Ferri
105
120
Orig.-Nr. / réf. origine / orig.-part-no.
0901016
50
80
R=
180
R= 120
104
64
16,5
The original part-numbers are only indicated for comparison!
0,480
Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved
90
12.12
Hammerschlegel und Schlegelmesser
Marteaux broyeurs et couteaux pour débroussailleuses Pruning hammers and flail mover blades
Ferri
Ferri
63-FEI-03
63-FEI-05
Winkelmesser couteau équerre / L-blade
60
60
250
1,150
Orig.-Nr. / réf. origine / orig.-part-no.
0901004
0,880
Gewicht / poids / weight
Ferri
Orig.-Nr. / réf. origine / orig.-part-no.
0901019
0,970
Gewicht / poids / weight
Ø9
Ø13x26
37
Best. Nr.: réf. article part-no.
45° 59
Orig.-Nr. / réf. origine / orig.-part-no.
0,530
Gewicht / poids / weight
Ø8
1
143
8
80
5
37
Ø25,5
2
41,5 22
40
Y-Messer couteau-Y / Y-blade
Orig.-Nr. réf. origine orig.-part-no.
Gewicht poids weight
1
Y-Messer couteau-Y / Y-blade
63-MAL-24
0901133
0,120
2
Schäkel manille shackle
63-TRR-03
0901118
0,054
Ferri Schrauben mit ®Sicherungsmuttern boulons avec écrous à freinage interne bolts with self-locking nuts
Best. Nr.: réf. article part-no.
63-1265-1 63-12100
63-FEI-91
Güte qualité quality
Gewicht poids weight
L
G
M12x1,75 M12x1,75
65 100
32 32
10.9 8.8
0,085 0,120
M16x2
60
40
10.9
0,150
7/16“
63
30
8.8
0,060
G
L
63-1660
Gewinde filet thread
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! 12.12 La référence d´origine présentée ci-dessus ne sert qu´à la coordination! The original part-numbers are only indicated for comparison!
Gruppe 3 Seite 67 groupe/section 3 page 67
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
Ferri
63-FEI-38 60
8
65
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
Ø25,5
240
8
75
0901005
Gerades Messer couteau droit / straight blade
Ø25,5
250
8
63-FEI-09
Y-Messer couteau-Y / Y-blade
Ø25,5
2
Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding
60
Ferri
Hammerschlegel und Schlegelmesser
Marteaux broyeurs et couteaux pour débroussailleuses Pruning hammers and flail mover blades
S
ØD Ød
D
63-FEI-19 63-FEI-48 63-FEI-64
35 13 8 51 25 9,5 35 17 3
d
Ferri
63-FEI-12
Orig.-Nr. Gewicht réf. origine poids orig.-part-no. weight
S
1101034
Gerades Messer couteau droit / straight blade
0,050 0,200 0,020
60
Ø25,5
8
Buchsen entretoises / bushs
ØB
D
L
ØD
63-FEI-14 63-FEI-17 63-IND-07-1 63-FEI-65
17 17 17 16,5
B
L
25 25 25 19 25 19 25 32,5
0,040 0,035 0,030
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
0,780
Ø11,5 105
8
52
Ø14x29
43
3
30
Best. Nr.: réf. article part-no.
Ø11
63-FEI-15
1
Y-Messer couteau-Y / Y-blade
2
Schäkel manille / shackle
3
Schraube mit Sicherungsmutter - 8.8 boulon avec écrou à freinage interne - 8.8 bolt with self-locking nut - 8.8
63
7/16”
2
48
1
40
Orig.-Nr. réf. origine orig.-part-no.
Gewicht poids weight
0901068
0,260
63-MUL-71
0,110
63-FEI-91
0,060
Ferri ® 1
2
48
Ø11,5
Ø14x29 8
52
40
85
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
Ferri
Ø11
43
3 7/16”
63
30
1
Y-Messer couteau-Y / Y-blade
2
Schäkel manille / shackle
3
Schraube mit Sicherungsmutter - 8.8 boulon avec écrou à freinage interne - 8.8 bolt with self-locking nut - 8.8
Best. Nr.: réf. article part-no.
63-FEI-13
Orig.-Nr. réf. origine orig.-part-no.
Gewicht poids weight
0901049
0,260
63-MUL-71
0,110
63-FEI-91
0,060
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! Gruppe 3 Seite 68 La référence d´origine présentée ci-dessus ne sert qu´à la coordination!
groupe/section 3 page 68
The original part-numbers are only indicated for comparison!
Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved
Scheibe rondelle / washer
Best. Nr.: réf. article part-no.
230
Ferri
12.12
Hammerschlegel und Schlegelmesser
Marteaux broyeurs et couteaux pour débroussailleuses Pruning hammers and flail mover blades
Ferri 1
60
63-FEI-50
60
Schäkel manille / shackle
Ø25,5
Ø25,5
8 48
150
2
145
8
12
47
26
59
73
Ø11
73
14
Ø25
63,5 Ø51
Ø13
3
0,145
Gewicht / poids / weight
100
Ferri
32
63-FEI-29
Best. Nr.: réf. article part-no.
Orig.-Nr. réf. origine orig.-part-no.
Gewicht poids weight
1
Y-Messer couteau-Y / Y-blade
63-FEI-04
0901003
0,520
2
Gerades Messer couteau droit / straight blade
63-FEI-33
0901148
0,500
3
Buchse entretoise / bush
63-FEI-18
1101016
0,175
4
Buchse entretoise / bush
63-IND-62
1101017
0,160
5
Schraube mit Sicherungsmutter-8.8 boulon avec écrou à freinage interne-8.8 bolt with self-locking nut-8.8
63-12100
0303017
Y-Messer couteau-Y / Y-blade 60 Ø25,5 8
43
Orig.-Nr. / réf. origine / orig.-part-no.
0,120
0901085
Gewicht / poids / weight
0,440
Ferri
8
Ø25
3
3 Best. Nr.: réf. article part-no.
245
1
Ø16,5
Ø25,5
2
Ø35
28
Ø17
®
60
4 40
M16x2
Gewicht poids weight
0901001
0,960
1
Y-Messer couteau-Y / Y-blade
63-FEI-02
2
Buchse entretoise / bush
63-FEI-63
0,054
3
Scheibe rondelle / washer
63-FEI-64
0,020
4
Schraube mit Sicherungsmutter-10.9 boulon avec écrou à freinage interne-10.9 bolt with self-locking nut-10.9
63-1660
0,150
80
60
Orig.-Nr. réf. origine orig.-part-no.
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! 12.12 La référence d´origine présentée ci-dessus ne sert qu´à la coordination! The original part-numbers are only indicated for comparison!
Gruppe 3 Seite 69 groupe/section 3 page 69
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
M12x1,75
5
Orig.-Nr. / réf. origine / orig.-part-no.
120
4 Ø25,5
Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding
Ferri
Altes Modell ancien modèle old model
Hammerschlegel und Schlegelmesser
Marteaux broyeurs et couteaux pour débroussailleuses Pruning hammers and flail mover blades
Ferri
Altes Modell ancien modèle old model
1 Ø25,5
Maschinentyp: modèle de machine: machine type:
MP160 - MP200 - MP230 60
145
8
Ø25,5
2
8 150
59
73
Ø51
4
Ø25,5
14
73
Ø25
3 100
40
5
M16x2
Best. Nr.: réf. article part-no.
Ø16,5
Orig.-Nr. réf. origine orig.-part-no.
Gewicht poids weight
1
Y-Messer couteau-Y / Y-blade
63-FEI-04
0901003
0,520
2
Gerades Messer couteau droit / straight blade
63-FEI-33
0901148
0,500
3
Buchse entretoise / bush
63-ZZZ-23
1101018
0,095
4
Buchse entretoise / bush
63-IND-62
1101017
0,160
5
Schraube mit Sicherungsmutter-10.9 boulon avec écrou à freinage interne-10.9 bolt with self-locking nut-10.9
63-16100
0304017
0,210
Fischer
Fischer
63-FIS-27
®
1
Messer couteau / blade
2
40 65
Ø14x30
18
5
42
1
Y-Messer couteau-Y / Y-blade
2
Schraube mit Sicherungsmutter-10.9 boulon avec écrou à freinage interne-10.9 bolt with self-locking nut-10.9
Ø29
180
M10x1,5
82
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
44
Best. Nr.: réf. article part-no.
Orig.-Nr. réf. origine orig.-part-no.
Gewicht poids weight
63-SM-01
0,140
63-1065
0,110
270
10
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! Gruppe 3 Seite 70 La référence d´origine présentée ci-dessus ne sert qu´à la coordination!
groupe/section 3 page 70
The original part-numbers are only indicated for comparison!
1,600
Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved
60
12.12
Hammerschlegel und Schlegelmesser
Marteaux broyeurs et couteaux pour débroussailleuses Pruning hammers and flail mover blades
Fischer Typ GL
210
10
Ø28
37
M16x1,5 11
3
50
1
Ø16,5
Ø40
Ø17
5
4
18
6
2
Orig.-Nr. réf. origine orig.-part-no.
Best. Nr.: réf. article part-no.
Gewicht poids weight
63-IND-44-R re/dr/ri 63-IND-44-L li/ga/le
0,900
1
Schlegel fléau / flail
2
Scheibe rondelle / washer
63-FIS-91
0,040
3
Buchse entretoise / bush
63-FIS-92
0,065
4
Schraube - 12.9 boulon - 12.9 / bolt - 12.9
63-1650
0,100
5
Mutter M16x1,5 boulon M16x1,5 / bolt M16x1,5
63-1016
0,030
Abb. rechte Ausführung fig. modèle droit ill. right model 60 Ø29
Ø17
3
5
M16x1,5
4
6
18
Orig.-Nr. réf. origine orig.-part-no.
Best. Nr.: réf. article part-no.
Gewicht poids weight
63-IND-45-R re/dr/ri 63-IND-45-L li/ga/le
1,100
1
Schlegel fléau / flail
2
Scheibe rondelle / washer
63-FIS-91
0,040
3
Buchse entretoise / bush
63-FIS-92
0,065
4
Schraube - 12.9 boulon - 12.9 / bolt - 12.9
63-1650
0,100
5
Mutter M16x1,5 boulon M16x1,5 / bolt M16x1,5
63-1016
0,030
37
Ø28
50
1
Ø16,5
Ø40
2
260
10
Typ SL
Fischer Ø40
5
Ø13
2
3
145
8
1
35
M12x1,25
20
4
Ø12,1
Ø25 9
Abb. rechte Ausführung ® fig. modèle droit ill. right model 50 Ø25,5
Orig.-Nr. réf. origine orig.-part-no.
Best. Nr.: réf. article part-no.
Gewicht poids weight
63-IND-47-R re/dr/ri 63-IND-47-L li/ga/le
0,960
1
Schlegel fléau / flail
2
Scheibe rondelle / washer
63-FIS-93
0,045
3
Buchse entretoise / bush
63-FIS-94
0,026
30-1235
0,060
4
Schraube mit Sicherungsmutter-12.9 boulon avec écrou à freinage interne-12.9 bolt with self-locking nut-12.9
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! 12.12 La référence d´origine présentée ci-dessus ne sert qu´à la coordination! The original part-numbers are only indicated for comparison!
Gruppe 3 Seite 71 groupe/section 3 page 71
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
Fischer
11
Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding
Abb. rechte Ausführung fig. modèle droit ill. right model 60 Ø29
Hammerschlegel und Schlegelmesser
Marteaux broyeurs et couteaux pour débroussailleuses Pruning hammers and flail mover blades
Fischer 1
50
85 R=
155
Orig.-Nr. réf. origine orig.-part-no.
Best. Nr.: réf. article part-no.
Gewicht poids weight
1
Hammerschlegel marteau broyeur / pruning hammer
63-RM-3
1,500
2
Schraube mit Sicherungsmutter-10.9 boulon avec écrou à freinage interne-10.9 bolt with self-locking nut-10.9
63-16130
0,200
Fischer
Fischer
63-IND-09
Fischer
63-FIS-500
Y-Messer couteau-Y / Y-blade
63-UNI-01
Y-Messer couteau-Y / Y-blade
Y-Messer couteau-Y / Y-blade
30
40
Ø16,5
40
Ø10x20
Ø14x33 5
76
100
3
R
30
10
53
39
34
19
Orig.-Nr. / réf. origine / orig.-part-no.
0,320
Gewicht / poids / weight
Orig.-Nr. / réf. origine / orig.-part-no.
0,045
Gewicht / poids / weight
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
0,140
Fischer 1
37
2
65
M10x1,5
17
28
90
47
24
®
Ø10,5
5
10,5
Ø10
Best. Nr.: réf. article part-no.
Orig.-Nr. réf. origine orig.-part-no.
Gewicht poids weight
1
Gedrehtes Messer couteau torsadé / twisted blade
63-EPO-54
69.32.040
0,100
33
2
Schäkel manille / shackle
63-HAN-71 69.32.041
0,070
15
3
Schäkel manille / shackle
63-HAN-73
0,090
4
Schraube mit Sicherungsmutter-10.9 boulon avec écrou à freinage interne-10.9 bolt with self-locking nut-10.9
63-1065-1
0,060
35
47
Ø10
4
3 Ø10
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! Gruppe 3 Seite 72 La référence d´origine présentée ci-dessus ne sert qu´à la coordination!
groupe/section 3 page 72
The original part-numbers are only indicated for comparison!
Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved
130
16,5
95
70
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
2
M16x2
12.12
Hammerschlegel und Schlegelmesser
Marteaux broyeurs et couteaux pour débroussailleuses Pruning hammers and flail mover blades
Fischer
Fischer
63-FIS-07
Fischer
63-M-1
Gedrehtes-Messer couteau torsadé twisted blade
63-RM-5-16
Hammerschlegel marteau broyeur pruning hammer
70
Hammerschlegel marteau broyeur pruning hammer
70 70
16,5
R=
R= 88
88
210
16,5
170
Orig.-Nr. / réf. origine / orig.-part-no.
Orig.-Nr. / réf. origine / orig.-part-no.
1,030
Gewicht / poids / weight
185
2,000
Gewicht / poids / weight
Fischer
Orig.-Nr. / réf. origine / orig.-part-no.
Fischer
63-FIS-39
63-FIS-42-R re/dr/ri 63-FIS-42-L li/ga/le
Gedrehtes-Messer couteau torsadé / twisted blade
2,000
Gewicht / poids / weight
Abb. rechte Ausführung fig. modèle droit ill. right model
Gedrehtes-Messer / couteau torsadé / twisted blade 8
Ø20,5
Ø20,5
Ø16,5
Ø16,5
800
690
Orig.-Nr. / réf. origine / orig.-part-no.
Orig.-Nr. / réf. origine / orig.-part-no.
4,440
Gewicht / poids / weight
Forigo-Roteritalia 63-CAE-04
Forigo-Roteritalia 63-AGM-03
63-RM-4-20
®
3,700
Gewicht / poids / weight
Forigo-Roteritalia Hammerschlegel marteau broyeur pruning hammer
Y-Messer couteau-Y / Y-blade
60
205 80 90
90
205 80
Y-Messer couteau-Y / Y-blade 40
Ø28,5
20,5
40
Ø20,5 8
R=
110
120
230
7
52
57
120
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
0,740
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
1,313
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! 12.12 La référence d´origine présentée ci-dessus ne sert qu´à la coordination! The original part-numbers are only indicated for comparison!
0,300
Gruppe 3 Seite 73 groupe/section 3 page 73
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
10
8
Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding
Ø28,5
Hammerschlegel und Schlegelmesser
Marteaux broyeurs et couteaux pour débroussailleuses Pruning hammers and flail mover blades
Gestin
Gestin
63-RM-1-16
63-RM-11-16
63-RM-1-20
Hammerschlegel marteau broyeur pruning hammer
Hammerschlegel marteau broyeur pruning hammer
Hammerschlegel marteau broyeur pruning hammer
60
60
60
16,5
R= 88
R=
R= 150
150
Orig.-Nr. / réf. origine / orig.-part-no.
1,450
Gewicht / poids / weight
Gestin
150 Orig.-Nr. / réf. origine / orig.-part-no.
Orig.-Nr. / réf. origine / orig.-part-no.
1,430
Gewicht / poids / weight
1,750
Gewicht / poids / weight
Gilbers
63-RM-11-20
10
M10x1,5
Hammerschlegel marteau broyeur pruning hammer
1
2 60
145
20,5
150
100
1,730
Gewicht / poids / weight
Orig.-Nr. Gewicht réf. origine poids orig.-part-no. weight
63-IND-128-A
1,470
2
Sicherung barre de sécurité safety
63-GLB-902
0,162
3
Schraube - 10.9 boulon - 10.9 bolt - 10.9
63-GLB-903
0,029
8
Orig.-Nr. / réf. origine / orig.-part-no.
Schlegel fléau / flail
3 M10x1,5
Best. Nr.: réf. article part-no.
60
1
35
90
Ø11
R= 88
Gilbers ®
2
48
1 Ø12,5
45
54
Ø16x38 8
100
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
16,5
88
88
20,5
40
50
87
M12x1,75
20
3
Ø12
Best. Nr.: réf. article part-no.
Orig.-Nr. réf. origine orig.-part-no.
1
Y-Messer couteau-Y / Y-blade
63-UNI-05
0,190
2
Schäkel manille / shackle
63-YYY-72
0,120
3
Schraube mit Sicherungsmutter-8.8 boulon avec écrou à freinage interne-8.8 bolt with self-locking nut-8.8
63-1287
0,110
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! Gruppe 3 Seite 74 La référence d´origine présentée ci-dessus ne sert qu´à la coordination!
groupe/section 3 page 74
Gewicht poids weight
The original part-numbers are only indicated for comparison!
Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved
Gestin
12.12
Hammerschlegel und Schlegelmesser
Marteaux broyeurs et couteaux pour débroussailleuses Pruning hammers and flail mover blades
Gilbers 3
21
40
48 23
14,5
Ø16
Ø13
20
M14x2
Orig.-Nr. réf. origine orig.-part-no.
Gewicht poids weight
63-VOT-55
F470307
0,320
Best. Nr.: réf. article part-no.
1
Schlegel fléau / flail
2
Schäkel manille / shackle
63-TUR-72
F470301
0,230
3
Buchse entretoise / bush
63-TUR-81
02.807.01
0,040
4
Schraube mit Sicherungsmutter-12.9 boulon avec écrou à freinage interne-12.9 bolt with self-locking nut-12.9
63-TUR-91
2
3
73
2
0,150
100
10
12,5
Ø11
40
87
M12x1,75
4
20
1
Schlegel fléau / flail
2
Schäkel manille / shakle
3 4
Ø12
25
65
1
48 26
Orig.-Nr. réf. origine orig.-part-no.
Best. Nr.: réf. article part-no.
63-MUL-51
901068
Gewicht poids weight
0,300
63-GIL-73
0,140
Aluminium buchse entretoise en aluminium / aluminium bush
63-MUL-63
0,010
Schraube mit Sicherungsmutter-10.9 boulon avec écrou à freinage interne-10.9 bolt with self-locking nut-10.9
63-1287
0,110
Gilbers ®
1
3
14
4
30
Ø12,5
40
Ø10
73
2
3 Ø16,5
M12x1,75
30
Ø13
Ø14x34
60
10
Orig.-Nr. réf. origine orig.-part-no.
Best. Nr.: réf. article part-no.
Gewicht poids weight
1
Schlegel fléau / flail
63-GIL-52
0,220
2
Schäkel manille / shackle
63-GIL-71
0,140
3
Spannbuchse entretoise de serrage / clamping bush
63-GIL-84
0,010
4
Schraube mit Sicherungsmutter-10.9 boulon avec écrou à freinage interne-10.9 bolt with self-locking nut-10.9
63-1260-1
0,080
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! 12.12 La référence d´origine présentée ci-dessus ne sert qu´à la coordination! The original part-numbers are only indicated for comparison!
Gruppe 3 Seite 75 groupe/section 3 page 75
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
Ø16x35
Ø20
Gilbers
98
Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding
1
90
95
12
4 Ø24
Ø16x35
Hammerschlegel und Schlegelmesser
Marteaux broyeurs et couteaux pour débroussailleuses Pruning hammers and flail mover blades
Gilbers 10
Ø10,5
40
1
2
100
Ø10
30
60
M10x1,5 27
3
Schlegel fléau / flail
63-GIL-51
0,220
2
Schäkel manille / shackle
63-GIL-72
0,150
3
Schraube mit Sicherungsmutter-8.8 boulon avec écrou à freinage interne-8.8 bolt with self-locking nut-8.8
63-1060
0,060
Gilbers
63-MUL-54
60
Schlegel fléau / flail
10
M16x2
1
M10x1,5
4
103
M10x1,5
Ø25
Ø16
2
®
1
Schlegel fléau / flail
2
Buchse entretoise / bush
3
Schraube - 10.9 boulon - 10.9 / bolt - 10.9
3
35
Orig.-Nr. réf. origine orig.-part-no.
Gewicht poids weight
63-IND-128
G802029
1,360
63-GIL-86
608-026
0,230
Best. Nr.: réf. article part-no.
63-GLB-903
0,029
30-MU10-2
0,010
4
Sicherungsmutter écrou à freinage interne self-locking nut
5
Schraube mit Sicherungsmutter-8.8 boulon avec écrou à freinage interne-8.8 bolt with self-locking nut-8.8
63-16124
0,220
6
Schraube mit Sicherungsmutter-8.8 boulon avec écrou à freinage interne-8.8 bolt with self-locking nut-8.8
63-16140
0,270
40
Orig.-Nr. / réf. origine / orig.-part-no.
802-001
Gewicht / poids / weight
Gilbers
63-BOM-51 Y-Messer mit 3-gliedr. Kette couteau-Y avec chaîne à 3 maillons Y-blade with 3 link-chain
Ø6,6
Orig.-Nr. / réf. origine / orig.-part-no.
01.086.06
Gewicht / poids / weight
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! Gruppe 3 Seite 76 La référence d´origine présentée ci-dessus ne sert qu´à la coordination!
groupe/section 3 page 76
0,280
135
100
98
124
M16x2
8
Ø16x34
90
5
140
59
90
6 Ø10,5
140
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
Gewicht poids weight
1
Gilbers 26
Orig.-Nr. réf. origine orig.-part-no.
Best. Nr.: réf. article part-no.
The original part-numbers are only indicated for comparison!
0,180
Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved
78
Ø14x34
12.12
Hammerschlegel und Schlegelmesser
Marteaux broyeurs et couteaux pour débroussailleuses Pruning hammers and flail mover blades
Gilbers 80
1
3
140
6 R=
45
63
2
Ø25,5
47,5
Ø15,2
Orig.-Nr. réf. origine orig.-part-no.
Best. Nr.: réf. article part-no.
M14x2
3
71
1
Hammerschlegel marteau broyeur / pruning hammer
2
Buchse entretoise / bush
3
Schraube mit Sicherungsmutter-10.9 boulon avec écrou à freinage interne-10.9 bolt with self-locking nut-10.9
Gewicht poids weight
63-RM-45
0,840
63-BOM-64
0,150
63-14140
0,210
Abb. rechte Ausführung fig. modèle droit ill. right model
63-GLB-905
Ø28 Ø20
3
80
7
20
1 Ø28,5
Schraube - 10.9 boulon - 10.9 / bolt - 10.9
Ø60
33,5
4
M16x2
Orig.-Nr. / réf. origine / orig.-part-no.
5
Gewicht / poids / weight 54
2
®
Ø4,5 4,5
9
M20x1,5
1
Schlegel fléau / flail
2
Messerschraube - 10.9 boulon - 10.9 / bolt - 10.9
3
Buchse entretoise / bush
4
Kronenmutter écrou à créneaux dégagés hexagon castle nut
5
Splint goupille split pin
Best. Nr.: réf. article part-no.
Orig.-Nr. réf. origine orig.-part-no.
35
22
240
145
10
Gewicht poids weight
63-GLB-01R re/dr/ri 63-GLB-01L li/ga/le
802-001
1,370
63-GLB-900
100-227
0,170
63-GIL-85
800-010
0,160
63-GLB-901
113-001
0,060
63-435
133-007
0,010
0,250
Gilbers
30-MU16-2 Sicherungsmutter - 8.8 écrou à freinage interne - 8.8 self-locking nut - 8.8
M16x2
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! 12.12 La référence d´origine présentée ci-dessus ne sert qu´à la coordination! The original part-numbers are only indicated for comparison!
0,030
Gruppe 3 Seite 77 groupe/section 3 page 77
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
Gilbers
Gilbers
33,5
Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding
26
37
Hammerschlegel und Schlegelmesser
Marteaux broyeurs et couteaux pour débroussailleuses Pruning hammers and flail mover blades
Gilbers 1 2
20,5
150
40
Best. Nr.: réf. article part-no.
1
Hammerschlegel marteau broyeur / pruning hammer
2
Schraube mit Sicherungsmutter-10.9 boulon avec écrou à freinage interne-10.9 bolt with self-locking nut-10.9
802-042
1,313
63-RM-4-20 63-20150
0,011
Gimac
63-GIM-01
63-ZZZ-31
Gerades Messer couteau droit / straight blade
Y-Messer couteau-Y / Y-blade
35
Ø18x36
Y-Messer couteau-Y / Y-blade 40 Ø17x34
Ø17
115
7
6
170
40
Gewicht poids weight
Gimac
63-GIM-03
7
51
53
Orig.-Nr. / réf. origine / orig.-part-no.
31696
0,230
Gewicht / poids / weight
Orig.-Nr. / réf. origine / orig.-part-no.
0,300
Gewicht / poids / weight
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
0,300
Goede ®
1 95
12
3 80
Ø16x35
19
7/16"
40
49 23
11,5
73
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
Gimac
Orig.-Nr. réf. origine orig.-part-no.
105
120
2
Ø13
Best. Nr.: réf. article part-no.
Orig.-Nr. réf. origine orig.-part-no.
1
Gedrehtes Messer couteau torsadé / twisted blade
63-VOT-55
0,230
2
Schäkel manille / shackle
63-TUR-73
0,210
3
Schraube mit Sicherungsmutter-10.9 boulon avec écrou à freinage interne-10.9 bolt with self-locking nut-10.9
63-71680
0,078
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! Gruppe 3 Seite 78 La référence d´origine présentée ci-dessus ne sert qu´à la coordination!
groupe/section 3 page 78
Gewicht poids weight
The original part-numbers are only indicated for comparison!
Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved
R=
110
50
M20x2,5
12.12
Hammerschlegel und Schlegelmesser
Marteaux broyeurs et couteaux pour débroussailleuses Pruning hammers and flail mover blades
Gutbrod
63-GRA-03
18,5
Messer couteau / blade
Ø8
Ø2
2
120
Ø17
22
113
15,5
Orig.-Nr. / réf. origine / orig.-part-no.
Gewicht poids weight
1
Y-Messer couteau-Y / Y-blade
63-AGR-51
0,040
2
Bolzen mit Splint piton avec goupille bolt with split-pin
63-TOR-81
0,011
0,800
Gewicht / poids / weight
Orig.-Nr. réf. origine orig.-part-no.
Best. Nr.: réf. article part-no.
12
85
2
3 Ø13,5
20
8
38
5
75
7 35
Ø4
Best. Nr.: réf. article part-no.
Orig.-Nr. Gewicht réf. origine poids orig.-part-no. weight
63-NIC-00
12170000
1,070
2
Klinge lame / blade
63-NIC-01
12170100
0,550
3
Halter support / holder
63-NIC-02
10080200
0,420
4
Buchse entretoise / bush
63-NIC-61
12170200
0,070
30 Ø28
62,5
Schlegel mit Halter, Buchse und Klinge komplett montiert fléau assemblé avec support, entretoise et lame flail assembled with holder, bush and blade
® 1
4
Ø5
44
M10x1,5
6
23
5
Ø20
Ø28
7
71
150
35
1
15
Ø12,5
100
30
5
Schraube mit Sicherungsmutter - 8.8 boulon avec écrou à freinage interne - 8.8 bolt with self-locking nut - 8.8
6
Bolzen piton / bolt
63-NIC-81
7
Spezialfederstecker goupille béta spéciale / special spring-pin
63-NIC-82
63-1035
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! 12.12 La référence d´origine présentée ci-dessus ne sert qu´à la coordination! The original part-numbers are only indicated for comparison!
0,030 80150400
0,135 0,015
Gruppe 3 Seite 79 groupe/section 3 page 79
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
Gyro
Ø20
Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding
2
1
Ø8
23,5
Gramegna
Hammerschlegel und Schlegelmesser
Marteaux broyeurs et couteaux pour débroussailleuses Pruning hammers and flail mover blades
Hansa Ø10,5
90
47
24
65
M10x1,5 28
3
Hemos
Best. Nr.: réf. article part-no.
Orig.-Nr. réf. origine orig.-part-no.
Gewicht poids weight
5314056
0,100
1
Gedrehtes Messer couteau torsadé / twisted blade
63-EPO-54
2
Schäkel manille / shackle
63-HAN-71
0,070
3
Schraube mit Sicherungsmutter-10.9 boulon avec écrou à freinage interne-10.9 bolt with self-locking nut-10.9
63-1065-1
0,060
Hemos
63-MUL-52
IND-84B re/dr/ri IND-84BL li/ga/le
Schlegel fléau / flail
Schneckensegment segment limace snail segment
Ø20x35
450 350
Abb. rechts fig. droit ill. right
100
30°
10
50 Orig.-Nr. / réf. origine / orig.-part-no.
0,340
Gewicht / poids / weight
Hemos
5 14
63-HEM-92
8
®
Schäkel manille / shackle 44
Ø12,5x 3
13
18
0
83
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
RS15033
17
Ø10
35
Maschinentyp: modèle de machine: machine type:
2
37
68 Ø13
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
0,250
Orig.-Nr. / réf. origine / orig.-part-no. re/dr/ri Orig.-Nr. / réf. origine / orig.-part-no. li/ga/le
93015200
Gewicht / poids / weight
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! Gruppe 3 Seite 80 La référence d´origine présentée ci-dessus ne sert qu´à la coordination!
groupe/section 3 page 80
The original part-numbers are only indicated for comparison!
1,310
Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved
1
5
10,5
12.12
Hammerschlegel und Schlegelmesser
Marteaux broyeurs et couteaux pour débroussailleuses Pruning hammers and flail mover blades
Herder SW-32
1 20,5
33
M20x2,5
R= 90
Orig.-Nr. réf. origine orig.-part-no.
Gewicht poids weight
63-WIL-51
95722004
2,240
63-20151
91042022
0,260
Best. Nr.: réf. article part-no.
206
1
Hammerschlegel marteau broyeur / pruning hammer
2
Schraube mit Sicherungsmutter-10.9 boulon avec écrou à freinage interne-10.9 bolt with self-locking nut-10.9
Herder
63-MUL-51
63-MUL-52
Schlegel fléau / flail
Schlegel fléau / flail
Ø16x35
10
100
10
100
Ø20x35
40
50
Orig.-Nr. / réf. origine / orig.-part-no.
0,300
Gewicht / poids / weight
Orig.-Nr. / réf. origine / orig.-part-no.
0,340
Gewicht / poids / weight
Herder ®
2
33 11
12,5
79
Ø12x32
12
Ø11
1 30
65
M12x1,75
32
3
Best. Nr.: réf. article part-no.
Orig.-Nr. réf. origine orig.-part-no.
Gewicht poids weight
9572.2002 0,300
1
Schlegel fléau / flail
63-HER-51
2
Schäkel manille / shackle
63-HER-71 9580.2002
0,180
3
Schraube mit Sicherungsmutter-12.9 boulon avec écrou à freinage interne-12.9 bolt with self-locking nut-12.9
63-1265-2
9100.1204
0,090
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! 12.12 La référence d´origine présentée ci-dessus ne sert qu´à la coordination! The original part-numbers are only indicated for comparison!
Gruppe 3 Seite 81 groupe/section 3 page 81
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
Herder
98
Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding
86
150
2
Hammerschlegel und Schlegelmesser
Marteaux broyeurs et couteaux pour débroussailleuses Pruning hammers and flail mover blades
Herder 3
4
Ø16
1 40
48 23
Schlegel fléau / flail
2
2
Ø13
Orig.-Nr. réf. origine orig.-part-no.
Gewicht poids weight
63-VOT-55 9572.2012
0,320
Schäkel manille / shackle
63-TUR-72 9280.2006
0,230
3
Buchse entretoise bush
63-TUR-81 9217.1621 0,040
4
Schraube mit Sicherungsmutter-12.9 boulon avec écrou à freinage interne-12.9 bolt with self-locking nut-12.9
63-TUR-91 9100.1407 0,150
73
14,5
1
M14x2
Best. Nr.: réf. article part-no.
63-HER-13R re/dr/ri 63-HER-13L li/ga/le Gerades-Messer couteau droit straight blade
70
Ø35
150
10
Abb. rechte Ausführung fig. modèle droit ill. right model Orig.-Nr. / réf. origine / orig.-part-no.
0,730
Gewicht / poids / weight
Hermes
Hermes
63-HER-03
63-HER-04
®
Gerades-Messer / couteau droit / straight blade
Gerades-Messer / couteau droit / straight blade 10
10 190
Ø17
190
Ø17
70
70
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
Hermes
550
700
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
Orig.-Nr. / réf. origine / orig.-part-no.
3,000
Gewicht / poids / weight
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! Gruppe 3 Seite 82 La référence d´origine présentée ci-dessus ne sert qu´à la coordination!
groupe/section 3 page 82
The original part-numbers are only indicated for comparison!
4,000
Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved
21
20
95
12
90
Ø24
Ø16x35
12.12
Hammerschlegel und Schlegelmesser
Marteaux broyeurs et couteaux pour débroussailleuses Pruning hammers and flail mover blades
Hermes
Hermes
63-HER-05
63-HER-07
Gedrehtes-Messer / couteau torsadé / twisted blade
10
10
190
Ø17
140
Ø17
70
70
190
550
700
Orig.-Nr. / réf. origine / orig.-part-no.
Orig.-Nr. / réf. origine / orig.-part-no.
3,000
Gewicht / poids / weight
Gewicht / poids / weight
4,000
Hermes
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
63-HER-08 Gedrehtes-Messer / couteau torsadé / twisted blade 10 190 Ø17
70
140
550
Orig.-Nr. / réf. origine / orig.-part-no.
3,000
Gewicht / poids / weight
Hermes
63-HER-10
®
Gedrehtes-Messer / couteau torsadé / twisted blade 10
190
Ø17
70
Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding
Gedrehtes-Messer / couteau torsadé / twisted blade
700
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
3,800
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! 12.12 La référence d´origine présentée ci-dessus ne sert qu´à la coordination! The original part-numbers are only indicated for comparison!
Gruppe 3 Seite 83 groupe/section 3 page 83
Hammerschlegel und Schlegelmesser
Marteaux broyeurs et couteaux pour débroussailleuses Pruning hammers and flail mover blades
Hermes
63-HER-01
63-HER-02
63-ZZZ-06
Y-Messer couteau-Y / Y-blade
Y-Messer couteau-Y / Y-blade 50
Y-Messer couteau-Y / Y-blade 30
Ø16,5
Ø10,5x23
Ø11,5x23 5 95
10
95
5
118
40
Hermes
42
36
72
Orig.-Nr. / réf. origine / orig.-part-no.
0,150
Gewicht / poids / weight
Orig.-Nr. / réf. origine / orig.-part-no.
0,500
Gewicht / poids / weight
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
2
1 130
70 M16x2
R=
88
28
16,5
170
1
Hammerschlegel marteau broyeur / pruning hammer
2
Schraube mit Sicherungsmutter-10.9 boulon avec écrou à freinage interne-10.9 bolt with self-locking nut-10.9
Best. Nr.: réf. article part-no.
Orig.-Nr. réf. origine orig.-part-no.
Gewicht poids weight
63-M-1
2,000
63-16132
0,260
HMF FREI ®
2
70
M16x2
85
28
16,5
130
1
155
R=
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
HMF FREI
Best. Nr.: réf. article part-no.
Orig.-Nr. réf. origine orig.-part-no.
Gewicht poids weight
1
Hammerschlegel marteau broyeur / pruning hammer
63-RM-3
1,500
2
Schraube mit Sicherungsmutter-10.9 boulon avec écrou à freinage interne-10.9 bolt with self-locking nut-10.9
63-16132
0,260
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! Gruppe 3 Seite 84 La référence d´origine présentée ci-dessus ne sert qu´à la coordination!
groupe/section 3 page 84
The original part-numbers are only indicated for comparison!
0,110
Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved
Hermes
12.12
Hammerschlegel und Schlegelmesser
Marteaux broyeurs et couteaux pour débroussailleuses Pruning hammers and flail mover blades
HMF FREI 2
16,5
Best. Nr.: réf. article part-no.
185
1
Hammerschlegel marteau broyeur / pruning hammer
2
Schraube mit Sicherungsmutter-10.9 boulon avec écrou à freinage interne-10.9 bolt with self-locking nut-10.9
63-RM-5-16
2,000
63-16132
0,260
HMF FREI
LS-Ausführung modéle LS LS-execution
1
21
Gewicht poids weight
63-IND-09
2
Y-Messer couteau-Y / Y-blade
70
16,5
40
75
1
Hammerschlegel marteau broyeur / pruning hammer
2
Schraube mit Sicherungsmutter-10.9 boulon avec écrou à freinage interne-10.9 bolt with self-locking nut-10.9
Orig.-Nr. réf. origine orig.-part-no.
10
Gewicht poids weight
63-RM-32
0,640
63-1670
0,160
30
Best. Nr.: réf. article part-no.
Ø16,5
M16x2
R
95
40
100
HMF FREI
Orig.-Nr. réf. origine orig.-part-no.
53
39
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
0,320
HMF FREI ® Ø11
1
52,5
40
5
42
Y-Messer couteau-Y / Y-blade
2
Schäkel manille shackle
22
Ø11
82
Ø14x30
1
2
44
Best. Nr.: réf. article part-no.
Orig.-Nr. réf. origine orig.-part-no.
63-SM-01 63-HMF-06
Gewicht poids weight
0,140 33452
0,130
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! 12.12 La référence d´origine présentée ci-dessus ne sert qu´à la coordination! The original part-numbers are only indicated for comparison!
Gruppe 3 Seite 85 groupe/section 3 page 85
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
R= 88
28
M16x2
R=
Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding
70
130
1
Hammerschlegel und Schlegelmesser
Marteaux broyeurs et couteaux pour débroussailleuses Pruning hammers and flail mover blades
Howard
Howard
63-FEI-04
Gerades Messer couteau droit / straight blade
Ø25,5 8
104
6
59
73
Orig.-Nr. / réf. origine / orig.-part-no.
222022424
0,160
Gewicht / poids / weight
222034000
63-FEI-13
Howard
63-FEI-15
Y-Messer couteau-Y / Y-blade
63-HOW-49
Y-Messer couteau-Y / Y-blade
Y-Messer couteau-Y / Y-blade 50
40
8
85
8
43
Orig.-Nr. / réf. origine / orig.-part-no.
0,210
Gewicht / poids / weight
Howard
Orig.-Nr. / réf. origine / orig.-part-no.
222011424
Gewicht / poids / weight
0,260
Howard
Schlegel / fléau / flail
222022424
Gewicht / poids / weight
Ø32
Gewicht / poids / weight
2,090
12 400
72900
Ø32
470
Orig.-Nr. / réf. origine / orig.-part-no.
75
Schlegel fléau flail
12
12
Orig.-Nr. / réf. origine / orig.-part-no.
Orig.-Nr. / réf. origine / orig.-part-no.
73955/A
Gewicht / poids / weight
3,170
78663
Gewicht / poids / weight
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! Gruppe 3 Seite 86 La référence d´origine présentée ci-dessus ne sert qu´à la coordination!
groupe/section 3 page 86
0,500
63-HOW-24
75
Schlegel fléau flail
75
Orig.-Nr. / réf. origine / orig.-part-no.
Howard
63-HOW-13
®
Ø32
10
60
43
63-HOW-23
Ø25,5
Ø14x29
Ø14x29
105
40
0,520
Gewicht / poids / weight
Howard
315
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
Howard
Orig.-Nr. / réf. origine / orig.-part-no.
The original part-numbers are only indicated for comparison!
2,560
Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved
60
Ø16,5x34
145
40
Y-Messer couteau-Y / Y-blade
120
63-FEI-49
12.12
Hammerschlegel und Schlegelmesser
Marteaux broyeurs et couteaux pour débroussailleuses Pruning hammers and flail mover blades
Howard
Howard
63-HOW-26
63-HOW-48
63-HOW-28
Schlegel / fléau / flail
90
90
Ø32
Ø32,5
50
Ø25,5
8
8
10 318
310
60
1,600
Gewicht / poids / weight
Howard
Orig.-Nr. / réf. origine / orig.-part-no.
75055
1,600
Gewicht / poids / weight
Howard
63-HOW-25 Schlegel fléau flail
Ø32
63-HOW-51
90
Schlegel fléau flail
Y-Messer couteau-Y / Y-blade
Ø32
40
8
Ø18x30
470
475
12
0,440
Gewicht / poids / weight
Howard
63-HOW-27
75
Orig.-Nr. / réf. origine / orig.-part-no.
6
32
Orig.-Nr. / réf. origine / orig.-part-no.
73955
3,050
Gewicht / poids / weight
Orig.-Nr. / réf. origine / orig.-part-no.
74058
2,500
Gewicht / poids / weight
Orig.-Nr. / réf. origine / orig.-part-no.
222022029
Gewicht / poids / weight
0,165
Howard 1
®
2 M16x1,5
40
26,5
90
16,5
110
22
120
M16x1,5
3
24
Orig.-Nr. réf. origine orig.-part-no.
Best. Nr.: réf. article part-no.
Gewicht poids weight
1
Hammerschlegel marteau broyeur / pruning hammer
63-RM-25
1,350
2
Schraube - 10.9 boulon - 10.9 / bolt - 10.9
63-SEP-91
0,180
3
Mutter écrou nut
63-SEP-92
0,028
15,5
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! 12.12 La référence d´origine présentée ci-dessus ne sert qu´à la coordination! The original part-numbers are only indicated for comparison!
Gruppe 3 Seite 87 groupe/section 3 page 87
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
644680
83
Orig.-Nr. / réf. origine / orig.-part-no.
R=
Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding
Y-Messer couteau-Y / Y-blade
Schlegel / fléau / flail
100
Howard
Hammerschlegel und Schlegelmesser
Marteaux broyeurs et couteaux pour débroussailleuses Pruning hammers and flail mover blades
Howard 2
1 M16x1,5
Best. Nr.: réf. article part-no.
R =9
0
22
120
M16x1,5
24
15,5
3
Hammerschlegel marteau broyeur / pruning hammer
63-RM-26
222022001 1,150
2
Schraube - 10.9 boulon - 10.9 / bolt - 10.9
63-SEP-91
0,180
3
Mutter écrou nut
63-SEP-92
0,028
Humus
63-HUM-03
2 25
16,5
M16x2
115
Ø12
88
4
Orig.-Nr. réf. origine orig.-part-no.
R=
Best. Nr.: réf. article part-no.
150
Hammerschlegel marteau broyeur / pruning hammer
63-RM-1-16 59091399
63-HUM-91
590-95-073 Mutter
150
1,450
0,260
90980602
20
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
Humus
0,360
Humus 1
®
63-HUM-07
2
40 25 20,5
M20x2,5
115
Ø12
88
4
150
1
Hammerschlegel marteau broyeur / pruning hammer
2
Schraube mit Sicherungsmutter-8.8 boulon avec écrou à freinage interne-8.8 bolt with self-locking nut-8.8
Best. Nr.: réf. article part-no.
Wechselklinge lame de rechange / change blade
Orig.-Nr. réf. origine orig.-part-no.
Gewicht poids weight
63-RM-1-20 45165116D 1,430 Schraube
63-HUM-92
22495014 Mutter
9098601
0,300
150
20
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! Gruppe 3 Seite 88 La référence d´origine présentée ci-dessus ne sert qu´à la coordination!
groupe/section 3 page 88
6
30
67
60
6
30
Gewicht poids weight
Schraube
Schraube mit Sicherungsmutter-8.8 boulon avec écrou à freinage interne-8.8 bolt with self-locking nut-8.8
Wechselklinge lame de rechange / change blade
60
1
R=
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
40
60
2
Gewicht poids weight
1
Humus
1
Orig.-Nr. réf. origine orig.-part-no.
The original part-numbers are only indicated for comparison!
0,430
Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved
16,5
40
26,5
90
12.12
Hammerschlegel und Schlegelmesser
Marteaux broyeurs et couteaux pour débroussailleuses Pruning hammers and flail mover blades
Humus
63-HUM-94
30,5 37 43
18,5
24
Ø4
Orig.-Nr. / réf. origine / orig.-part-no.
Güte / qualité / quality
32592451
12.9
Gewicht / poids / weight
0,180
Humus
Humus
Schlegel fléau flail
Schlegel fléau flail
63-HUM-05
63-HUM-06
50
Ø20
50 Ø20
6 170
6
63-HUM-94
115
63-HUM-94
Orig.-Nr. / réf. origine / orig.-part-no.
32792398 0,230
Orig.-Nr. / réf. origine / orig.-part-no.
0,360
Gewicht / poids / weight
Gewicht / poids / weight
Humus
Humus Abb. linke Ausführung ® fig. modèle gauche ill. left model 80
35
63-IND-189
2
Überschnittklinge lame / blade
M12x1,75
Ø20
50
6
Ø13
gedrückt embouti pressed
1
Best. Nr.: réf. article part-no. 5 14
1
Wechselklinge lame à changer / replace blade
2
Schraube mit Sicherungsmutter-10.9 boulon avec écrou à freinage interne-10.9 bolt with self-locking nut-10.9
Orig.-Nr. Gewicht réf. origine poids orig.-part-no. weight
63-IND-149-R 355.92.386 re/dr/ri 63-IND-149-L 355.92.387 li/ga/le 63-1235
5 24
0,860 57
0,060
Orig.-Nr. / réf. origine / orig.-part-no.
325-92-625
Gewicht / poids / weight
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! 12.12 La référence d´origine présentée ci-dessus ne sert qu´à la coordination! The original part-numbers are only indicated for comparison!
0,540
Gruppe 3 Seite 89 groupe/section 3 page 89
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
26,5
5
27
35 21
Ø20
25
M16x1,5
6
10
Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding
Messerschraube mit Kronenmutter passend für 63-HUM-05 und 63-HUM-06 boulon pour couteau avec écrou à créneaux dégagés s´adaptant pour 63-HUM-05 et 63-HUM-06 blade bolt with hexagon castle nut fitting for 63-HUM-05 and 63-HUM-06
Hammerschlegel und Schlegelmesser
Marteaux broyeurs et couteaux pour débroussailleuses Pruning hammers and flail mover blades
Humus
63-HUM-95
23,7
21 40
27
16
62
Orig.-Nr. / réf. origine / orig.-part-no.
Güte / qualité / quality
19/300251 16D
10.9
Gewicht / poids / weight
0,200
Humus
Humus
Y-Messer couteau-Y Y-blade
Y-Messer couteau-Y Y-blade
63-HUM-01
50
Ø16,5 6
Ø16,5
135
63-HUM-95
8
135
50
63-HUM-02
46
63-HUM-95
46
59092385 0,320
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
Humus
63-HUM-93
®
Messerschraube mit Kronenmutter boulon pour couteau avec écrou à créneaux dégagés blade bolt with hexagon castle nut Ø24
+ 0,2
27
M20x1,5
35 22
36,5 47,5
,5
26,5
57,5
Orig.-Nr. Schraube / réf. origine boulon / orig.-part-no. bolt Orig.-Nr. Mutter / réf. origine écrou / orig.-part-no. Gewicht / poids / weight
0,270
21,5
28 5
34
10
Ø4
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
M16x2
44
4
Güte / qualité / quality
19/451151 19/165051
12.9
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! Gruppe 3 Seite 90 La référence d´origine présentée ci-dessus ne sert qu´à la coordination!
groupe/section 3 page 90
The original part-numbers are only indicated for comparison!
22492376 0,420
Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved
Messerschraube mit Sicherungsmutter - Gedrückt passend für 63-HUM-01 und 63-HUM-02 boulon pour couteau avec écrou à freinage interne - embouti s´adaptant pour 63-HUM-01 et 63-HUM-02 blade bolt with self-locking nut - pressed fitting for 63-HUM-01 and 63-HUM-02
12.12
Hammerschlegel und Schlegelmesser
Marteaux broyeurs et couteaux pour débroussailleuses Pruning hammers and flail mover blades
Humus
Humus
63-IND-32-A
Schlegel fléau flail
80
10
63-HUM-93 0 31
Abb. links fig. gauche ill. left
10
301 951 1,190
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
Humus
Ø24,3
10
Schlegel fléau flail
Orig.-Nr. / réf. origine / orig.-part-no. re/dr/ri Orig.-Nr. / réf. origine / orig.-part-no. li/ga/le Gewicht / poids / weight
80
HK 2000 HKP 3000 HKN 950
63-IND-90-R re/dr/ri 63-IND-90-L li/ga/le Schlegel fléau flail
80
Ø24,3
63-HUM-93
5 38 420
Abb. links fig. gauche ill. left
Orig.-Nr. / réf. origine / orig.-part-no. re/dr/ri Orig.-Nr. / réf. origine / orig.-part-no. li/ga/le Gewicht / poids / weight
302 851 302 951 2,340
Humus
Orig.-Nr. / réf. origine / orig.-part-no. re/dr/ri Orig.-Nr. / réf. origine / orig.-part-no. li/ga/le
80
Neue Ausführung nouveau modèle new model HKP 1600
63-IND-92-R re/dr/ri 63-IND-92-L li/ga/le
10
0 33
Abb. links fig. gauche ill. left Orig.-Nr. / réf. origine / orig.-part-no. re/dr/ri Orig.-Nr. / réf. origine / orig.-part-no. li/ga/le
80
Ø24,3
Schlegel fléau flail
63-HUM-93
Gewicht / poids / weight
1,250
Gewicht / poids / weight
Humus
63-IND-91-R re/dr/ri ® 63-IND-91-L li/ga/le Ø24,3
63-HUM-93
0 22
Abb. links fig. gauche ill. left
Schlegel fléau flail
302 351 302 251 1,710
Humus
10
63-IND-34-AR re/dr/ri 63-IND-34-AL li/ga/le
Alte Ausführung ancien modèle old model
80
Ø24,3
63-HUM-93
5 21
10
Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding
Ø24,3
63-IND-33-A-R re/dr/ri 63-IND-33-A-L li/ga/le
63-HUM-93
5 35
Abb. links fig. gauche ill. left
453251 453251 1,920
Orig.-Nr. / réf. origine / orig.-part-no. re/dr/ri Orig.-Nr. / réf. origine / orig.-part-no. li/ga/le Gewicht / poids / weight
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! 12.12 La référence d´origine présentée ci-dessus ne sert qu´à la coordination! The original part-numbers are only indicated for comparison!
2,100
Gruppe 3 Seite 91 groupe/section 3 page 91
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
Schlegel fléau flail
Hammerschlegel und Schlegelmesser
Marteaux broyeurs et couteaux pour débroussailleuses Pruning hammers and flail mover blades
Humus
Humus Schlegel fléau flail
HKN 1000 HKN 1200
Ø24,3
63-HUM-93
440
10
0 47
10
Schlegel fléau flail
63-HUM-08
80
Ø24,3
63-HUM-93
11 0
Abb. links fig. gauche ill. left
303 051 303 051 2,720
Orig.-Nr. / réf. origine / orig.-part-no. re/dr/ri Orig.-Nr. / réf. origine / orig.-part-no. li/ga/le Gewicht / poids / weight
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
Hymach
HU004-53751 2,620
Hymach
63-HYM-05
63-HYM-06
Gerades-Messer couteau droit straight blade
Gerades-Messer couteau droit straight blade
Ø12,5
40
Ø12,5
40
60 60
560
6
640
6
Orig.-Nr. / réf. origine / orig.-part-no.
Orig.-Nr. / réf. origine / orig.-part-no.
1,530
Gewicht / poids / weight
1,790
Gewicht / poids / weight
Hymach ®
2
32
M18x1,5
3
18
40
50 12
M18x1,5
24
77
Ø20,5
158
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
80
1
60
Best. Nr.: réf. article part-no.
Orig.-Nr. réf. origine orig.-part-no.
1
Gedrehtes-Messer couteau torsadé / twisted blade
63-HYM-12
0,670
2
Schraube - 10.9 boulon - 10.9 / bolt - 10.9
63-HYM-900
0,330
3
Sicherungsmutter - 10.9 écrou à freinage interne - 10.9 self-locking nut - 10.9
51-1042
0,045
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! Gruppe 3 Seite 92 La référence d´origine présentée ci-dessus ne sert qu´à la coordination!
groupe/section 3 page 92
Gewicht poids weight
The original part-numbers are only indicated for comparison!
Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved
63-IND-100-R re/dr/ri 63-IND-100-L li/ga/le
12.12
Hammerschlegel und Schlegelmesser
Marteaux broyeurs et couteaux pour débroussailleuses Pruning hammers and flail mover blades
Hymach
63-HYM-04 Gerades Messer couteau droit 80 straight blade
63-HYM-01
Gerades Messer couteau droit straight blade 80
Ø24,5
Y-Messer couteau-Y / Y-blade
Ø24,5
40 13
Ø14x30 8
265
345
13
42
Orig.-Nr. / réf. origine / orig.-part-no.
2,690
Gewicht / poids / weight
Orig.-Nr. / réf. origine / orig.-part-no.
2,050
Gewicht / poids / weight
Orig.-Nr. / réf. origine / orig.-part-no.
0,260
Gewicht / poids / weight
42 16
Ø11,5
Y-Messer couteau-Y / Y-blade
50
70 32
52
1
63-HYM-02
2
48
Ø20,5
Ø11
85
41
1
Hammerschlegel marteau broyeur / pruning hammer
2
Schäkel manille / shackle
10
63-RM-17
0,440
63-MUL-71
0,110
41
Orig.-Nr. / réf. origine / orig.-part-no.
0,460
Hymach
Hymach
63-HYM-11
®
63-ZZZ-32
Gerades Messer couteau droit / straight blade
40
Y-Messer couteau-Y / Y-blade
40 Ø14x27
60
Ø26,5
Ø16,5x34,5
8
6 113
155
Schlegel fléau flail
Gewicht poids weight
Gewicht / poids / weight
Hymach
63-HYM-10
Orig.-Nr. réf. origine orig.-part-no.
156
8
Best. Nr.: réf. article part-no.
50
48
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
0,370
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
0,170
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! 12.12 La référence d´origine présentée ci-dessus ne sert qu´à la coordination! The original part-numbers are only indicated for comparison!
0,540
Gruppe 3 Seite 93 groupe/section 3 page 93
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
Hymach
Hymach
110
Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding
Hymach
63-HYM-03
114
Hymach
Hammerschlegel und Schlegelmesser
Marteaux broyeurs et couteaux pour débroussailleuses Pruning hammers and flail mover blades
Ilmer
63-ILM-03-R re/dr/ri 63-ILM-03-L li/ga/le
Abb. rechte Ausführung fig. modèle droit ill. right model
Gedrehtes-Messer / couteau torsadé / twisted blade
100
Ø16,5
70
Ø40
580 Orig.-Nr. / réf. origine / orig.-part-no.
2,500
Gewicht / poids / weight
Ilmer
63-ILM-07
63-ILM-06-R re/dr/ri 63-ILM-06-L li/ga/le
Gedrehtes-Messer couteau torsadé / twisted blade
100
Ø16,5
75
Ø37
475
475
Orig.-Nr. / réf. origine / orig.-part-no.
Orig.-Nr. / réf. origine / orig.-part-no.
2,000
Gewicht / poids / weight
Ilmer
63-ILM-08
Ø16,5
70
70
Ø40
Abb. rechte Ausführung fig. modèle droit ill. right model
Gedrehtes-Messer / couteau torsadé / twisted blade 8
8
2,500
Gewicht / poids / weight
Ilmer
63-ILM-09
®
Gedrehtes-Messer couteau torsadé / twisted blade
Gedrehtes-Messer couteau torsadé / twisted blade
8
8
Ø37
Ø12,5
75
Ø16,5
70
65 70
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
Ilmer
400
320
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
Orig.-Nr. / réf. origine / orig.-part-no.
1,400
Gewicht / poids / weight
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! Gruppe 3 Seite 94 La référence d´origine présentée ci-dessus ne sert qu´à la coordination!
groupe/section 3 page 94
The original part-numbers are only indicated for comparison!
1,720
Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved
8
12.12
Hammerschlegel und Schlegelmesser
Marteaux broyeurs et couteaux pour débroussailleuses Pruning hammers and flail mover blades
Irus 36
Ø13
2
M12
14,5
80
6,5
80
8x45° Ø14x25
1
72
3
Best. Nr.: réf. article part-no.
Orig.-Nr. réf. origine orig.-part-no.
63-JDE-01
1
Schlegel fléau / flail
2
Buchse entretoise / bush
3
Schraube mit Sicherungsmutter-10.9 boulon avec écrou à freinage interne-10.9 bolt with self-locking nut-10.9
Gewicht poids weight
010132370098
0,140
63-JDE-900 010132370094
0,052
63-1280-1
0,100
Ø12,5
14,5
M12
5
43
Irus
63-RM-97
3
2 80
Ø22 Ø13
32
1
40
1
Y-Messer couteau-Y / Y-blade
2
Buchse entretoise / bush
3
Schraube mit Sicherungsmutter-10.9 boulon avec écrou à freinage interne-10.9 bolt with self-locking nut-10.9
Best. Nr.: réf. article part-no.
Orig.-Nr. réf. origine orig.-part-no.
63-PAL-06
Gewicht poids weight
010132370096
0,160
63-JDE-900 010132370094
0,052
63-1280-1
0,100
Iseki
63-ISE-99
®
Y-Messer couteau-Y / Y-blade
Hammerschlegel marteau broyeur / pruning hammer 30 45
Ø13x27
12
105
4 78 R=
74
20
Orig.-Nr. / réf. origine / orig.-part-no.
010132370097
Gewicht / poids / weight
0,390
Orig.-Nr. / réf. origine / orig.-part-no.
05010065
Gewicht / poids / weight
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! 12.12 La référence d´origine présentée ci-dessus ne sert qu´à la coordination! The original part-numbers are only indicated for comparison!
0,085
Gruppe 3 Seite 95 groupe/section 3 page 95
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
Irus
100
Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding
3
Ø22
17
32
10x45°
Hammerschlegel und Schlegelmesser
Marteaux broyeurs et couteaux pour débroussailleuses Pruning hammers and flail mover blades
JF
JNO
63-RM-82
64
Hammerschlegel marteau broyeur
Ø13
22
120
5,5
20,5
R=
110
90
110
65
Orig.-Nr. / réf. origine / orig.-part-no.
40
John Deere
Ø13
63-JOH-04
Orig.-Nr. réf. origine orig.-part-no.
Best. Nr.: réf. article part-no.
Y-Messer couteau-Y / Y-blade
Gewicht poids weight
60
Ø19,5
63-JF-00
3129-449X 1,280
2
Klinge lame / blade
63-JF-01
2129-234X 0,530
3
Halter support holder
63-JF-02
2129-235X 0,690
4
Schraube mit Sicherungsmutter-8.8 boulon avec écrou à freinage interne-8.8 bolt with self-locking nut-8.8
63-1240
0,060
8
128
1
Schlegel mit Halter und Schraube fléau assemblé avec support et boulon flail assembled with holder and bolt
58
Orig.-Nr. / réf. origine / orig.-part-no.
0,500
Gewicht / poids / weight
John Deere ® 3
17
M10x1,5
Ø10
26
Ø14x25
6,5
1
3
72
2
M10x1,5
Best. Nr.: réf. article part-no.
Orig.-Nr. réf. origine orig.-part-no.
Gewicht poids weight
1
Schlegel fléau / flail
63-JDE-01
0,140
2
Schäkel manille / shackle
63-HAN-72
0,080
3
Schraube - 10.9 boulon - 10.9 / bolt - 10.9
105093110
0,030
4
Mutter - 8.8 écrou - 8.8 / bolt - 8.8
30-MU10-2
0,010
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! Gruppe 3 Seite 96 La référence d´origine présentée ci-dessus ne sert qu´à la coordination!
groupe/section 3 page 96
4
46
8x45°
Ø10,5
17
50
10x45°
37
36
80
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
M12x1,75
104
4
0,985
Gewicht / poids / weight
3
The original part-numbers are only indicated for comparison!
Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved
pruning hammer
2
1
12.12
Hammerschlegel und Schlegelmesser
Marteaux broyeurs et couteaux pour débroussailleuses Pruning hammers and flail mover blades
Joskin
Kongskilde
12
70
Ø12,5 50
205
Messer couteau blade
7
8
185
Best. Nr.: réf. article part-no.
47
85
1
Mähermesser couteau-faucheur / mover-blade
63-JOS-01
2
Messerschraube-M12x1,75 boulon -M12x1,75 blade bolt - M12x1,75
63-JOS-93
Orig.-Nr. réf. origine orig.-part-no.
Gewicht poids weight
JTR 015
0,950 0,081
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
0,730
2
Ø8,5
23,5
Ø2
1 Ø7
3
Ø8
Ø8
22
3
20
5 18,
Kuhn
63-NOB-12
Bolzen mit Splint piton avec goupille / bolt with split-pin
63-TOR-81
0,011
Bolzen mit Stift piton avec goupille / bolt with pin
63-TOR-82
0,010
2 3
26
Kuhn
63-NOB-35
63-NOB-11 Gedrehtes-Messer couteau torsadé twisted blade
Y-Messer couteau-Y / Y-blade 35
Ø20,5
Gewicht poids weight
0,085
Y-Messer couteau-Y / Y-blade
Kuhn ®
Orig.-Nr. réf. origine orig.-part-no.
Best. Nr.: réf. article part-no.
63-TOR-52
1
Y-Messer couteau-Y / Y-blade 50
18
Ø3,5
Ø16,5
Ø14x30
55
Orig.-Nr. / réf. origine / orig.-part-no.
606.0009
Gewicht / poids / weight
0,460
90
130
6
140
8 10
44
Orig.-Nr. / réf. origine / orig.-part-no.
606.00.06
Gewicht / poids / weight
0,140
40
Orig.-Nr. / réf. origine / orig.-part-no.
360.150.91
Gewicht / poids / weight
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! 12.12 La référence d´origine présentée ci-dessus ne sert qu´à la coordination! The original part-numbers are only indicated for comparison!
0,320
Gruppe 3 Seite 97 groupe/section 3 page 97
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
Kubota
105
Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding
8
63-IND-51
2
30,5 16 Ø30
Ø32
1
Ø20,4
Ø20,5
Hammerschlegel und Schlegelmesser
Marteaux broyeurs et couteaux pour débroussailleuses Pruning hammers and flail mover blades
Kuhn
Kuhn
63-NOB-16
63-NOB-27 Y-Messer couteau-Y / Y-blade
Ø26
Mittelschlegel fléau central central flail
Y-Messer couteau-Y / Y-blade
45
Ø16,5
8
42
Orig.-Nr. / réf. origine / orig.-part-no.
606.0000
0,330
Gewicht / poids / weight
34
Alte Ausführung ancien modèle old model
Orig.-Nr. / réf. origine / orig.-part-no.
606.01.79
Gewicht / poids / weight
Orig.-Nr. / réf. origine / orig.-part-no.
J1891018
0,550
Gewicht / poids / weight
Kuhn
0,370
Kuhn
63-RM-4
63-RM-7-16
Hammerschlegel marteau broyeur pruning hammer
Hammerschlegel marteau broyeur / pruning hammer
Anzahl der Hammerschlegel nombre de marteaux broyeurs number of pruning hammers
40
Maschinentyp modèle de machine machine type
16,5
R= 110
120 Orig.-Nr. / réf. origine / orig.-part-no.
6061700
10 12 14 16
VK95 VK115 VK135 VK155
VKD155 VKD170 VKD190 VKD210
16 18 20 22
1,350
Gewicht / poids / weight
108
Orig.-Nr. / réf. origine / orig.-part-no.
0,780
Gewicht / poids / weight
Kuhn
Kuhn
63-NOB-36
®
Hammerschlegel marteau broyeur / pruning hammer
37
16,5
5 10 R= 115
Orig.-Nr. / réf. origine / orig.-part-no.
6061900
Gewicht / poids / weight
0,900
Mittelschlegel fléau central central flail
Anzahl der Hammerschlegel nombre de marteaux broyeurs number of pruning hammers
Ø26
63-RM-101
16,5
22
8
Maschinentyp modèle de machine machine type
VKM170 VKM190 VKM210 VKM240 VKM280 VKM305
18 20 22 24 28 32
VKR210 VKR230 VKR265 VKR305
195
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
56
22 24 28 32
Neue Ausführung nouveau modèle new model
Orig.-Nr. / réf. origine / orig.-part-no.
6061701
Gewicht / poids / weight
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! Gruppe 3 Seite 98 La référence d´origine présentée ci-dessus ne sert qu´à la coordination!
groupe/section 3 page 98
34
The original part-numbers are only indicated for comparison!
0,550
Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved
8
135
8
125
200
Ø16,5
R= 10 5
40
Kuhn
63-NOB-18
12.12
Hammerschlegel und Schlegelmesser
Marteaux broyeurs et couteaux pour débroussailleuses Pruning hammers and flail mover blades
Kuhn 1
2 91
16
1891002
1,240
2
Schraube - 10.9 boulon - 10.9 bolt - 10.9
63-1691
J1891003
0,170
Selbstsichernde Sechskantmutter écrou hexagonal à freinage interne self-locking hexagon nut
51-1051
606.11.76
0,030
Kuhn
63-KUH-903
63-RM-43
Hammerschlegel marteau broyeur / pruning hammer
3
Kuhn
Gewicht poids weight
1
M16x2
3
Orig.-Nr. réf. origine orig.-part-no.
Best. Nr.: réf. article part-no.
Kuhn
63-16130
63-KUH-904
Buchse entretoise / bush
Schraube mit Sicherungsmutter - 10.9 boulon avec écrou à freinage interne - 10.9 bolt with self-locking nut - 10.9
Bolzen piton / bolt
Ø40
M16x2
50
130
Ø16
71,5 65
11,5
Ø16,5
Ø4
Orig.-Nr. / réf. origine / orig.-part-no.
6061177 - J1891017 Gewicht / poids / weight 0,110
Orig.-Nr. / réf. origine / orig.-part-no.
6060008
Gewicht / poids / weight
0,460
Orig.-Nr. / réf. origine / orig.-part-no.
80061664
Gewicht / poids / weight
0,200
®
14 159
63
1
20,5
Kuhn
86
2 33
110
35
M20x2,5
5 15 150
3 50
M20x2,5
Best. Nr.: réf. article part-no.
Orig.-Nr. réf. origine orig.-part-no.
Gewicht poids weight
6060007
1,800
1
Hammerschlegel marteau broyeur / pruning hammer
2
Schraube mit Sicherungsmutter-10.9 boulon avec écrou à freinage interne-10.9 bolt with self-locking nut-10.9
63-WIL-52
0,460
Schraube mit Sicherungsmutter-10.9 boulon avec écrou à freinage interne-10.9 bolt with self-locking nut-10.9
63-20150
0,484
3
63-RM-2
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! 12.12 La référence d´origine présentée ci-dessus ne sert qu´à la coordination! The original part-numbers are only indicated for comparison!
Gruppe 3 Seite 99 groupe/section 3 page 99
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
115
22
R= 11 0
M16x2
R=
Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding
36
Hammerschlegel und Schlegelmesser
Marteaux broyeurs et couteaux pour débroussailleuses Pruning hammers and flail mover blades
Kuhn 40
1
22
M16x2 30
39
M16x2
16,5
5
2
3
Ø12,5
Best. Nr.: réf. article part-no.
Orig.-Nr. réf. origine orig.-part-no.
Gewicht poids weight
1
Schlegel fléau / flail
63-NOB-45
JX135698
0,440
2
Buchse entretoise / bush
63-PRO-07
JX136263
0,030
3
Schäkel manille / shackle
63-KUH-906 JX135697
0,190
4
Schraube - 10.9 boulon - 10.9 bolt - 10.9
63-1691
J1891003
0,170
5
Selbstsichernde Sechskantmutter écrou hexagonal à freinage interne self-locking hexagon nut
51-1051
J0911604
0,030
Kuhn
80
60
M16x2
Best. Nr.: réf. article part-no.
Orig.-Nr. réf. origine orig.-part-no.
Y-Messer couteau-Y / Y-blade
63-FEI-02
0,960
2
Buchse entretoise / bush
63-FEI-63
0,054
3
Scheibe rondelle washer
63-FEI-64
0,020
4
Schraube mit Sicherungsmutter-10.9 boulon avec écrou à freinage interne-10.9 bolt with self-locking nut-10.9
63-1660
0,150
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! Gruppe 3 Seite 100 La référence d´origine présentée ci-dessus ne sert qu´à la coordination!
groupe/section 3 page 100
Gewicht poids weight
1
4 40
3
3 Ø35
8
Ø25
1
2
28
Ø17
®
Ø25,5
Ø16,5
60
245
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
68,5
13
Ø25 Ø17
13
70 100
The original part-numbers are only indicated for comparison!
Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved
91
10
81
Ø14,5x30
12.12
Hammerschlegel und Schlegelmesser
Marteaux broyeurs et couteaux pour débroussailleuses Pruning hammers and flail mover blades
Kuhn
Kuhn
Y-Messer couteau-Y / Y-blade
2 Ø51
Ø25,5
Ø25,5
40
Ø16,5
204
10
5 Ø25
Ø2
7
4 30
M20x2,5
24
5
49
3
8
75
46
60
M20x2,5
Orig.-Nr. / réf. origine / orig.-part-no.
36015092
22
Gewicht / poids / weight
Orig.-Nr. réf. origine orig.-part-no.
Gewicht poids weight
63-NOB-04
606.0002
0,850
Best. Nr.: réf. article part-no.
63-RM-46
Gerades-Messer couteau droit / straight blade
2
Buchse entretoise / bush
63-KUH-902
6060015
0,110
3
Bolzen piton / bolt
63-KUH-900
6061705
0,460
4
Selbstsichernde Sechskantmutter écrou hexagonal à freinage interne self-locking hexagon nut
63-KUH-901
6060019
0,050
5
Halter bride de support holder
50
26
R=
1
Hammerschlegel marteau broyeur pruning hammer
0
50
Kuhn
77
18
57
0,450
115
Orig.-Nr. / réf. origine / orig.-part-no.
0,530
63-HAL-01
6061699
Gewicht / poids / weight
1,330
Kuhn 46
3 30
M20x2,5
22
204
49
10
1
57 Ø25 Ø11
4 57 50
77
75
24
5
®
Ø25,5
Ø2
60
2 Best. Nr.: réf. article part-no.
Orig.-Nr. réf. origine orig.-part-no.
Gewicht poids weight
606.0004
1,020
1
7 Y-Messer couteau-Y / Y-blade
2
Bolzen piton / bolt
63-KUH-900 6061705
0,460
3
Selbstsichernde Sechskantmutter écrou hexagonal à freinage interne self-locking hexagon nut
63-KUH-901
6060019
0,050
4
Halter bride de support holder
M20x2,5
63-NOB-05
63-HAL-01
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! 12.12 La référence d´origine présentée ci-dessus ne sert qu´à la coordination! The original part-numbers are only indicated for comparison!
0,530
Gruppe 3 Seite 101 groupe/section 3 page 101
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
70
Ø11
70
Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding
60
63-NOB-02
17
175
1
Hammerschlegel und Schlegelmesser
Marteaux broyeurs et couteaux pour débroussailleuses Pruning hammers and flail mover blades
Kuhn
5
49
200
10
50 Ø25 70
Ø11
4 57 50
77
24
1
7 M20x2,5 Winkelmesser couteau équerre / L-blade
2
Gewicht poids weight
1,020
Bolzen piton / bolt
63-KUH-900 6061705
0,460
3
Selbstsichernde Sechskantmutter écrou hexagonal à freinage interne self-locking hexagon nut
63-KUH-901
6060019
0,050
4
Halter bride de support holder
63-HAL-01
0,530
Kuhn 28
63-KUH-905
2
Schäkel manille / shackle
1
Y-Messer couteau-Y / Y-blade
2
Buchse entretoise bush
Gewicht poids weight
63-NOB-16
606.0000
0,330
0,054
13
Orig.-Nr. réf. origine orig.-part-no.
63-FEI-63
Orig.-Nr. / réf. origine / orig.-part-no.
6060012
0,120
Gewicht / poids / weight
Kuhn
Kverneland-Maletti 63-MAL-29
®
Mittelschlegel fléau central / central flail
40
R= 11 2
40
Ø14,5 10
100
Orig.-Nr. / réf. origine / orig.-part-no.
6061709 - J1921002 Gewicht / poids / weight 0,470
Y-Messer couteau-Y / Y-blade Ø16,5 10 135
6
63-MAL-30
Y-Messer couteau-Y / Y-blade
Ø17
40
Kverneland-Maletti
131
63-NOB-37
Best. Nr.: réf. article part-no.
53
Ø11,5
42
37 16
16,5
Ø25
135
8
Ø16,5
Ø16,5
1
124
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
Orig.-Nr. réf. origine orig.-part-no.
Best. Nr.: réf. article part-no.
63-NOB-06
Kuhn 40
2
41
41
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
0,400
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! Gruppe 3 Seite 102 La référence d´origine présentée ci-dessus ne sert qu´à la coordination!
groupe/section 3 page 102
The original part-numbers are only indicated for comparison!
0,400
Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved
22
30
M20x2,5
1
75
46
3
Ø25,5
Ø2
60
12.12
Hammerschlegel und Schlegelmesser
Marteaux broyeurs et couteaux pour débroussailleuses Pruning hammers and flail mover blades
Kverneland-Maletti
63-RM-10-16
63-ZZZ-07
Hammerschlegel marteau broyeur pruning hammer
63-NOB-18 Mittelschlegel fléau central central flail
Gedrehtes-Messer couteau torsadé twisted blade Ø11
133
16,5
200
55
8
R=
10 0
5
34
35
150 Orig.-Nr. / réf. origine / orig.-part-no.
1,770
Gewicht / poids / weight
Orig.-Nr. / réf. origine / orig.-part-no.
6100077
Gewicht / poids / weight
0,190
Orig.-Nr. / réf. origine / orig.-part-no.
0,550
Gewicht / poids / weight
34
54
Ø13x26 80
5
37
3 30 45
M12x1,75
63-MAL-23
Y-Messer couteau-Y / Y-blade
63-MAL-24
0,120
2
Schäkel manille shackle
63-MAL-25
0,200
63-1245
0,065
Schraube mit Sicherungsmutter-10.9 boulon avec écrou à freinage interne-10.9 bolt with self-locking nut-10.9
Kverneland-Maletti
63-NOB-05
63-RM-66
Hammerschlegel marteau broyeur pruning hammer
Ø20
Y-Messer couteau-Y / Y-blade
60
Ø25,5 40
10
16,5
204
8
Gewicht poids weight
1
Kverneland-Maletti
®
Orig.-Nr. réf. origine orig.-part-no.
Best. Nr.: réf. article part-no.
Ø10
3
Kverneland-Maletti Schlegel fléau flail
2
Ø12,5
1
40
0 11 R=
30
Orig.-Nr. / réf. origine / orig.-part-no.
6401077
Gewicht / poids / weight
0,460
57
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
0,920
118
Orig.-Nr. / réf. origine / orig.-part-no.
6303076
Gewicht / poids / weight
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! 12.12 La référence d´origine présentée ci-dessus ne sert qu´à la coordination! The original part-numbers are only indicated for comparison!
1,310
Gruppe 3 Seite 103 groupe/section 3 page 103
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
Kverneland-Maletti
195
Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding
Kverneland-Maletti
Ø26
Kverneland-Maletti
Hammerschlegel und Schlegelmesser
Marteaux broyeurs et couteaux pour débroussailleuses Pruning hammers and flail mover blades
Kverneland-Maletti
Kverneland-Maletti
63-MAL-27
2
1
Y-Messer couteau-Y / Y-blade
90
R= 110
40
Best. Nr.: réf. article part-no.
120
40
M16x2
Orig.-Nr. réf. origine orig.-part-no.
Hammerschlegel marteau broyeur / pruning hammer
63-RM-4
1,350
2
Schraube mit Sicherungsmutter-10.9 boulon avec écrou à freinage interne -10.9 bolt with self-locking nut -10.9
63-1690
0,200
42
Orig.-Nr. / réf. origine / orig.-part-no.
Kverneland-Maletti
Ø16,5
63-MAL-15
Y-Messer couteau-Y / Y-blade
100
10
Best. Nr.: réf. article part-no.
58
1
Y-Messer couteau-Y / Y-blade
2
Schraube mit Sicherungsmutter-10.9 boulon avec écrou à freinage interne-10.9 bolt with self-locking nut-10.9
63-MAL-14
Kverneland-Maletti ®
Gerades-Messer couteau droit straight blade 50
Orig.-Nr. réf. origine orig.-part-no.
Gewicht poids weight
6400080
0,720
63-16100
0,210
Kverneland-Maletti 63-ZZZ-28
6200080
0,220
Kverneland-Maletti 63-ZZZ-45 Schlegel fléau flail
130
200
30
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
Orig.-Nr. / réf. origine / orig.-part-no.
Ø11 3
10
40
Gewicht / poids / weight
Y-Messer couteau-Y / Y-blade
Ø16,5
5
0,710
5
28
30
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
119
63-MAL-21
Ø14,5
M16x2
Ø18
190
40
40
138
2
1
0,410
Gewicht / poids / weight
Kverneland-Maletti - Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
10
Gewicht poids weight
1
50
Ø16,5
135
16,5
0,080
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! Gruppe 3 Seite 104 La référence d´origine présentée ci-dessus ne sert qu´à la coordination!
groupe/section 3 page 104
The original part-numbers are only indicated for comparison!
0,220
Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved
40
12.12
Hammerschlegel und Schlegelmesser
Marteaux broyeurs et couteaux pour débroussailleuses Pruning hammers and flail mover blades
Kverneland-Maletti
Lagarde
63-ZZZ-46
49
50
Gerades-Messer couteau droit straight blade 60 Ø25
Ø18,5
190
8
10 210
150
10
85
0,990
Gewicht / poids / weight
Lagarde
Orig.-Nr. / réf. origine / orig.-part-no.
0,560
Gewicht / poids / weight
Lagarde
63-M-39
63-LAG-02 Y-Messer couteau-Y / Y-blade
Ø26
Schlegel fléau flail
60
40
Ø25,5
8
8
12
0
225
18,5
0,870
Gewicht / poids / weight
Lagarde
63-LAG-01
Hammerschlegel marteau broyeur pruning hammer
Orig.-Nr. / réf. origine / orig.-part-no.
30
90
60
Orig.-Nr. / réf. origine / orig.-part-no.
1,390
Gewicht / poids / weight
Lagarde
63-LAG-05
0,540
Gewicht / poids / weight
Lagarde ®
Orig.-Nr. / réf. origine / orig.-part-no.
238002
Gewicht / poids / weight
63-LAG-03
Hammerschlegel marteau broyeur / pruning hammer
Ø25,5
0,900
Lagarde
63-RM-67
Y-Messer couteau-Y / Y-blade 60
Orig.-Nr. / réf. origine / orig.-part-no.
40
Buchse entretoise / bush
18,5
Ø25
213
6
55
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
0,700
90
Ø17
R=
12
0
80
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
1,510
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! 12.12 La référence d´origine présentée ci-dessus ne sert qu´à la coordination! The original part-numbers are only indicated for comparison!
0,160
Gruppe 3 Seite 105 groupe/section 3 page 105
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
Orig.-Nr. / réf. origine / orig.-part-no.
44
245
100
R=
Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding
63-ZZZ-30
Y-Messer couteau-Y / Y-blade
Ø18
Schlegel fléau flail
Lagarde
63-LAG-08
Hammerschlegel und Schlegelmesser
Marteaux broyeurs et couteaux pour débroussailleuses Pruning hammers and flail mover blades
Leckron 1
60
Hammerschlegel marteau broyeur / pruning hammer
Ø25
Ø25,5
21,5
8
0
42
2
R= 13 59
1
Y-Messer couteau-Y / Y-blade
2
Buchse entretoise bush
83
0,950
Leckron
0,560
0,040
63-IND-51 Messer couteau blade
70
Ø12,5
Ø25,5
50
60
Ø28
6400080
van Lengerich
Y-Messer couteau-Y / Y-blade
80
Gewicht poids weight
63-IND-07-1
63-NOB-05
Mulchmesser couteau-broyeur / comminution blade
Orig.-Nr. réf. origine orig.-part-no.
63-IND-07
van Lengerich
63-IND-34-B
Ø17
8
204
185
10
0 32 10
57
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
1,837
69849
0,920
Gewicht / poids / weight
Orig.-Nr. / réf. origine / orig.-part-no.
64462
Gewicht / poids / weight
0,730
Lipco ®
Y-Schlegelsatz paire de fléaux-Y set of Y-flails
40
1
2
Ø14,5
Ø6
M14x1,5
140
5
3
53
34
Orig.-Nr. / réf. origine / orig.-part-no.
601256
Gewicht / poids / weight
0,160
18
63-LIP-01
1
Y-Messer couteau-Y / Y-blade
2
Schraube mit Sicherungsmutter-12.9 boulon avec écrou à freinage interne-12.9 bolt with self-locking nut-12.9
35
Lipco
Orig.-Nr. / réf. origine / orig.-part-no.
145
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
Best. Nr.: réf. article part-no.
65
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
19
Best. Nr.: réf. article part-no.
63-IND-188
Orig.-Nr. réf. origine orig.-part-no.
Gewicht poids weight
600023
0,220
30-1435
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! Gruppe 3 Seite 106 La référence d´origine présentée ci-dessus ne sert qu´à la coordination!
groupe/section 3 page 106
The original part-numbers are only indicated for comparison!
0,090
Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved
63-RM-804
150
Lagarde
12.12
Hammerschlegel und Schlegelmesser
Marteaux broyeurs et couteaux pour débroussailleuses Pruning hammers and flail mover blades
Lipco 1
30
63-AGR-82
Ø10x20
63-AGR-71 135
63-835 20
63-AGR-52 16
10
Ø
8,
3
7,5
36
2
25,5 16
4 M8x1,25
Best. Nr.: réf. article part-no.
32
Orig.-Nr. réf. origine orig.-part-no.
Gewicht poids weight
1
Y-Messer couteau-Y Y-blade
63-AGR-52
0,040
2
Schäkel manille / shackle
63-AGR-71
0,040
3
Öse anneau ring
63-AGR-82
0,054
4
Schraube mit Sicherungsmutter-8.8 boulon avec écrou à freinage interne-8.8 bolt with self-locking nut-8.8
63-835
0,018
Maschio ®
Siehe: veuillez voir: / please see:
Maschio
63-RM-8-20
63-RM-10-20
Hammerschlegel marteau broyeur pruning hammer
Hammerschlegel marteau broyeur pruning hammer
40
55
20,5
20
R=
R= 90
Kverneland
100
Maletti
118
150
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
1,120
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! 12.12 La référence d´origine présentée ci-dessus ne sert qu´à la coordination! The original part-numbers are only indicated for comparison!
1,850
Gruppe 3 Seite 107 groupe/section 3 page 107
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
6
23 35
3 52
Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding
70
2,5
Hammerschlegel und Schlegelmesser
Marteaux broyeurs et couteaux pour débroussailleuses Pruning hammers and flail mover blades
Maschio
Maschio
63-RM-87
63-RM-4-20 Hammerschlegel marteau broyeur pruning hammer
Hammerschlegel marteau broyeur / pruning hammer
20,5
40
Alte Ausführung ancien modèle old model
63-RM-1-20
40
Hammerschlegel marteau broyeur pruning hammer
60
16
20,5
130
Orig.-Nr. / réf. origine / orig.-part-no.
1,313
Gewicht / poids / weight
Maschio
Orig.-Nr. / réf. origine / orig.-part-no.
T24004025
1,110
Gewicht / poids / weight
Maschio
63-ZZZ-08
Winkelmesser couteau équerre / L-blade
60
Ø25,5
Ø16,5
8
130
Ø16,5
03400405 / M03400410R 1,430
Gewicht / poids / weight
63-TRR-02
Winkelmesser couteau équerre / L-blade 45
Orig.-Nr. / réf. origine / orig.-part-no.
Maschio
63-TRR-01
Gerades-Messer couteau droit straight blade 45
150
130
8
210
120
8
52 60
Orig.-Nr. / réf. origine / orig.-part-no.
0,340
Gewicht / poids / weight
Maschio
45
Maschio
Maschio
63-MAS-54
®
63-MAS-55
Y-Messer couteau-Y / Y-blade
60
Ø16,5
Y-Messer couteau-Y / Y-blade 45
Ø25,5 8
8
Ø16,5 8
65
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
0,350
Orig.-Nr. / réf. origine / orig.-part-no.
T40005142
Gewicht / poids / weight
0,810
56
Orig.-Nr. / réf. origine / orig.-part-no.
T21004040
Gewicht / poids / weight
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! Gruppe 3 Seite 108 La référence d´origine présentée ci-dessus ne sert qu´à la coordination!
groupe/section 3 page 108
0,890
Gewicht / poids / weight
136
Gerades-Messer couteau droit straight blade
0,450
Gewicht / poids / weight
Orig.-Nr. / réf. origine / orig.-part-no.
210
63-MAS-58
Orig.-Nr. / réf. origine / orig.-part-no.
135
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
88 R=
R=
110
0 11 R=
The original part-numbers are only indicated for comparison!
0,400
Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved
Maschio
12.12
Hammerschlegel und Schlegelmesser
Marteaux broyeurs et couteaux pour débroussailleuses Pruning hammers and flail mover blades
Maschio
63-JDE-01
63-ZAP-01
36
10x45°
17
60
Y-Messer couteau-Y / Y-blade 60
Ø20,5
80
6,5
10
Ø20,5 10
60
Orig.-Nr. / réf. origine / orig.-part-no.
0,140
Gewicht / poids / weight
Maschio
Orig.-Nr. / réf. origine / orig.-part-no.
MTB
0,710
Gewicht / poids / weight
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
0,630
Maschio
63-MAS-57
63-MAS-70
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
Schlegel fléau lail
70
72
3
Y-Messer couteau-Y / Y-blade
Ø26
50
Ø20,5
190
10
115
8
61
30
Orig.-Nr. / réf. origine / orig.-part-no.
T40005143
0,500
Gewicht / poids / weight
Maschio
Orig.-Nr. / réf. origine / orig.-part-no.
03400406
Gewicht / poids / weight
0,470
Maschio
63-ZAP-08
63-ZZZ-44
®
Gerades-Messer couteau droit straight blade
Y-Messer couteau-Y / Y-blade 50
60
Ø20,5
Ø25,5
10
8
210
180
Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding
Y-Messer couteau-Y / Y-blade
8x45° Ø14x25
63-ZAP-03
150
Schlegel fléau flail
Maschio
120
Maschio
62
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
0,680
Orig.-Nr. / réf. origine / orig.-part-no.
40005141
Gewicht / poids / weight
0,700
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! 12.12 La référence d´origine présentée ci-dessus ne sert qu´à la coordination! The original part-numbers are only indicated for comparison!
Gruppe 3 Seite 109 groupe/section 3 page 109
Hammerschlegel und Schlegelmesser
Marteaux broyeurs et couteaux pour débroussailleuses Pruning hammers and flail mover blades
Maschio 40
Ø11,5
Ø14x30
Ø11 42
Y-Messer couteau-Y / Y-blade
2
Schäkel manille shackle
63-SM-01
Gewicht poids weight
T18004060 0,140
63-MUL-71
Maschio
0,110
Maschio 1
60
2
49
Ø25,5
150
10
41,5 22
Ø25
Schäkel manille / shackle
Ø16
63-TRR-03
Ø9
Ø16,5
60
Ø8
37
3 4
Ø25,5 Ø35
4
4 Orig.-Nr. / réf. origine / orig.-part-no.
Ø50
0,054
Gewicht / poids / weight
M16x1,5
5
Maschio
63-AGM-05
®
18,5
Orig.-Nr. réf. origine orig.-part-no.
Gewicht poids weight
80
40
Schlegel fléau / flail 50
6
M16x1,5
Ø25,5
150
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
Orig.-Nr. réf. origine orig.-part-no.
Best. Nr.: réf. article part-no.
10
8
78
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
0,220
1
Y-Messer couteau-Y / Y-blade
2
Best. Nr.: réf. article part-no.
63-AGM-01
0,650
Distanzbuchse entretoise d´écartement / distance bush
63-AGM-500
0,110
3
Scheibe rondelle / washer
63-AGM-503
0,025
4
Distanzscheibe rondelle d´écartement / distance washer
63-AGM-504
0,045
5
Schraube - 12.9 boulon - 12.9 / bolt - 12.9
51-1680R
0,152
6
Sicherungsmutter écrou à freinage interne / self-locking nut
51-MU16-1
0,030
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! Gruppe 3 Seite 110 La référence d´origine présentée ci-dessus ne sert qu´à la coordination!
groupe/section 3 page 110
The original part-numbers are only indicated for comparison!
Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved
52
82
5
1
1
2
48
12.12
Hammerschlegel und Schlegelmesser
Marteaux broyeurs et couteaux pour débroussailleuses Pruning hammers and flail mover blades
Maschio 3
Neue Ausführung neuveau modèle new model
20
2
60
120
Best. Nr.: réf. article part-no.
53
M20x1,5
R=
90
20,5
148
03400405
1,260
Hammerschlegel marteau broyeur / pruning hammer
63-RM-85
2
Schraube - 10.9 boulon - 10.9 bolt - 10.9
63-20121
0,350
51-20RMU
0,060
Selbstsichernde Sechskantmutter écrou hexagonal à freinage interne self-locking hexagon nut
M.E.A.A.T.
63-RM-4
Gewicht poids weight
1
3
M.E.A.A.T.
Orig.-Nr. réf. origine orig.-part-no.
M.E.A.A.T.
63-MEA-15
Hammerschlegel marteau broyeur pruning hammer
63-MUL-71
Buchse entretoise / bush
Schäkel manille / shackle
48
Ø11,5
16
40
52
Ø16
Ø25
16,5
Ø11
R= 110
120 Orig.-Nr. / réf. origine / orig.-part-no.
1,350
Gewicht / poids / weight
M.E.A.A.T.
Orig.-Nr. / réf. origine / orig.-part-no.
0,035
Gewicht / poids / weight
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
0,110
M.E.A.A.T.
63-MAL-24
®
2
1
Y-Messer couteau-Y / Y-blade
100
40 16,5
40
40
5
95
Ø13x26
R=
80
Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding
1
137 37
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
0,120
M16x2
Orig.-Nr. réf. origine orig.-part-no.
Best. Nr.: réf. article part-no.
Gewicht poids weight
1
Hammerschlegel marteau broyeur / pruning hammer
63-RM-6
1,600
2
Schraube mit Sicherungsmutter-10.9 boulon avec écrou à freinage interne-10.9 bolt with self-locking nut-10.9
63-16100
0,210
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! 12.12 La référence d´origine présentée ci-dessus ne sert qu´à la coordination! The original part-numbers are only indicated for comparison!
Gruppe 3 Seite 111 groupe/section 3 page 111
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
M20x1,5
Hammerschlegel und Schlegelmesser
Marteaux broyeurs et couteaux pour débroussailleuses Pruning hammers and flail mover blades
M.E.A.A.T.
63-MEA-10
M.E.A.A.T.
63-MEA-11
Y-Messer couteau-Y / Y-blade
63-MEA-16
Y-Messer couteau-Y / Y-blade 40
50
Buchse entretoise / bush
Ø20,5
Ø16,5
48
72
0,450
Orig.-Nr. / réf. origine / orig.-part-no.
0,380
Gewicht / poids / weight
Orig.-Nr. / réf. origine / orig.-part-no.
63-FEI-15
2 M18x1,5
Y-Messer couteau-Y / Y-blade
100
Ø18,5
Best. Nr.: réf. article part-no.
1
Y-Messer couteau-Y / Y-blade
2
Schraube mit Sicherungsmutter-10.9 boulon avec écrou à freinage interne-10.9 bolt with self-locking nut-10.9
Ø14x29
Orig.-Nr. réf. origine orig.-part-no.
63-MEA-02
0,500
63-18100
0,290
10
63-NOB-05
Winkelmesser couteau équerre L-blade 60 Ø25,5
Ø25,5
Y-Messer couteau-Y / Y-blade
60
Ø25,5 10
10
50
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
0,850
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
1,020
57
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! Gruppe 3 Seite 112 La référence d´origine présentée ci-dessus ne sert qu´à la coordination!
groupe/section 3 page 112
0,260
200
Gerades-Messer couteau droit straight blade
Orig.-Nr. / réf. origine / orig.-part-no.
M.E.A.A.T.
63-NOB-06
®
43
Gewicht / poids / weight
M.E.A.A.T.
63-NOB-04
8
Gewicht poids weight
204
72
M.E.A.A.T.
40
47
125
10
105
1
60
0,080
Gewicht / poids / weight
M.E.A.A.T.
204
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
M.E.A.A.T. 50
Ø20
45
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
130
115
10
Ø11,5
10
The original part-numbers are only indicated for comparison!
0,920
Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved
M.E.A.A.T.
12.12
Hammerschlegel und Schlegelmesser
Marteaux broyeurs et couteaux pour débroussailleuses Pruning hammers and flail mover blades
M.E.A.A.T.
M.E.A.A.T.
63-RM-74
M.E.A.A.T.
63-MEA-03
Hammerschlegel marteau broyeur pruning hammer
63-RM-6-18
Hammerschlegel marteau broyeur pruning hammer
Y-Messer couteau-Y / Y-blade
10
18,5 115
40
40
Ø16,2
16,5
R= 95
R= 97
40
137
1,820
Gewicht / poids / weight
Meritano
Orig.-Nr. / réf. origine / orig.-part-no.
0,380
Gewicht / poids / weight
Moreau
Hammerschlegel marteau broyeur pruning hammer
1,560
Gewicht / poids / weight
Mott
63-ZZZ-29
63-RM-37
Orig.-Nr. / réf. origine / orig.-part-no.
63-MOT-54 Y-Messer couteau-Y / Y-blade
Y-Messer couteau-Y / Y-blade 60
40
Ø30
37 Ø17
5 10
5
230
8
Ø13x27
82
30
36
76 55
1,310
Gewicht / poids / weight
Mott
Orig.-Nr. / réf. origine / orig.-part-no.
0,840
Gewicht / poids / weight
Mott
Y-Messer couteau-Y / Y-blade
63-ROU-53
Y-Messer couteau-Y / Y-blade
45
45
Ø14x30
Y-Messer couteau-Y / Y-blade 40
Ø14x35
Ø12x26
5
100
6
3
32
44
40
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
0,100
Mott
63-MOT-56
®
Gewicht / poids / weight
87
63-MOT-55
Orig.-Nr. / réf. origine / orig.-part-no.
100
Orig.-Nr. / réf. origine / orig.-part-no.
0,200
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
0,090
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! 12.12 La référence d´origine présentée ci-dessus ne sert qu´à la coordination! The original part-numbers are only indicated for comparison!
0,160
Gruppe 3 Seite 113 groupe/section 3 page 113
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
Orig.-Nr. / réf. origine / orig.-part-no.
137
80
Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding
45
Hammerschlegel und Schlegelmesser
Marteaux broyeurs et couteaux pour débroussailleuses Pruning hammers and flail mover blades
Mulag 13,5
49 23
88
80
2 Ø12,5
Best. Nr.: réf. article part-no.
20
1/2" UNF
15
1/2" UNF
3
2
Schäkel manille / shackle
3
Schraube - 10.9 boulon - 10.9 / bolt - 10.9
4
Sicherungsmutter écrou à freinage interne self-locking nut
Gewicht poids weight
63-MUL-74
186651
0,240
63-1288
186674
0,240
30-MU1/2.2
186673
0,020
Mulag
Mulag 48
Ø16x35
11,4
25,5
2
75
1
Schraube mit Sicherungsmutter-10.9 boulon avec écrou à freinage interne-10.9 bolt with self-locking nut-10.9
11,5 73
48,5 23
40
63-1273
Ø11
100
10
3
Ø12,5
Ø12
25
21
4
80
M12x1,75
Ø20
5
82
6
®
7/16”
Ø25
Orig.-Nr. / réf. origine / orig.-part-no.
20
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
Orig.-Nr. réf. origine orig.-part-no.
22
Ø14.5
Mulag Best. Nr.: réf. article part-no.
Orig.-Nr. réf. origine orig.-part-no.
Gewicht poids weight
1
Schlegel fléau / flail
63-MUL-51 TM60070142 0,300
2
Schäkel manille / shackle
63-MUL-72 TM60070143 0,150
3
Schäkel manille / shackle
63-MUL-73
4
Aluminium Buchse entretoise en aluminium / aluminium bush
63-MUL-63 TM60070146 0,014
5
Buchse entretoise / bush
63-MUL-64
6
Schraube mit Sicherungsmutter-10.9 boulon avec écrou à freinage interne-10.9 bolt with self-locking nut-10.9
63-71682
181686
186653
63-RM-76 Hammerschlegel marteau broyeur pruning hammer 50
28,5
0,238
0,050
R74
69
Orig.-Nr. / réf. origine / orig.-part-no.
0,080
194998
Gewicht / poids / weight
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! Gruppe 3 Seite 114 La référence d´origine présentée ci-dessus ne sert qu´à la coordination!
groupe/section 3 page 114
0,090
Gewicht / poids / weight
The original part-numbers are only indicated for comparison!
0,748
Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved
1
12.12
Hammerschlegel und Schlegelmesser
Marteaux broyeurs et couteaux pour débroussailleuses Pruning hammers and flail mover blades
Mulag Ø26,5
1
Ø40 Ø26,3
18
3 Ø10
35
Ø2
Ø1
6
150
108
Best. Nr.: réf. article part-no.
Orig.-Nr. réf. origine orig.-part-no.
Gewicht poids weight
1
Schlegel fléau / flail
63-IND-96
142385
1,820
2
Bolzen piton / pin
63-MUL-82
162960
0,710
3
Klemmring anneau de serrage / clamping-ring
63-MUL-81
162957
0,090
4
Spannstift goupille de serrage clamping pin
63-MUL-83
164394
0,015
Ø26,5
9
Ø8
8
Ø40 Ø25 15
3 Ø8
Alte Ausführung Ancien modèle Old model
40
Best. Nr.: réf. article part-no.
168
150
108
4
Ø8
2 Ø25
1
Orig.-Nr. réf. origine orig.-part-no.
Gewicht poids weight
1
Schlegel fléau / flail
63-IND-96
2
Bolzen piton / pin
63-MUL-55
3
Klemmring anneau de serrage / clamping-ring
63-MUL-84 TM60070452 0,080 147246
Spannstift goupille de serrage clamping pin
63-MUL-87 TM60070453 0,010 177738
4
1,820
142385
TM60070451 0,650 147245
Mulag Ø13x27
4 82
7/16”
48
52
Ø11,5
31
Ø11
25
20
100
5
2
3
Ø20
1 ®
40
Best. Nr.: réf. article part-no.
Ø12
Orig.-Nr. réf. origine orig.-part-no.
Gewicht poids weight
1
Y-Messer couteau-Y / Y-blade
63-MUL-53 SB40070142
0,130
2
Schäkel manille / shackle
63-MUL-71
0,110
3
Aluminium Buchse entretoise en aluminium / aluminium bush
63-MUL-63 TM60070146 0,014
4
Schraube mit Sicherungsmutter-10.9 boulon avec écrou à freinage interne-10.9 bolt with self-locking nut-10.9
63-71682
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! 12.12 La référence d´origine présentée ci-dessus ne sert qu´à la coordination! The original part-numbers are only indicated for comparison!
0,080
Gruppe 3 Seite 115 groupe/section 3 page 115
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
Mulag
10
Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding
170
Neue Ausführung Nouveau modèle New model
0
26
10
Ø10
4
40
2
154
Hammerschlegel und Schlegelmesser
Marteaux broyeurs et couteaux pour débroussailleuses Pruning hammers and flail mover blades
Mulag Maschinentyp: modèle de machine: machine type:
Ø17,5
1
63-MUL-01 Messer couteau / blade
MS-R
63
60 160
3
Ø16
80
8
23
Ø16,5
12
Ø11
60 Ø25 Ø11
0 12 4
83
Orig.-Nr. / réf. origine / orig.-part-no.
M10x1,5
2
Best. Nr.: réf. article part-no.
Orig.-Nr. Gewicht réf. origine poids orig.-part-no. weight
1
Schlegel fléau flail
63-IND-235
173679
0,397
2
Scheibe rondelle / washer
63-MUL-86
103643
0,011
3
Buchse entretoise / bush
63-MUL-85
173680
0,052
4
Mutter écrou / nut
30-MU10-2
102266
0,010
1010093110
174491
0,070
5
Schraube - 10.9 boulon -10.9 bolt - 10.9
63-MUL-89 Scheibe rondelle / washer
Ø16,6 Ø10,5
2,5
100 28
M10x1,5
2,020
Mulag
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
0,020
Mulag
Ø12
25
100
10
4 7/16”
50 48
11,4
25,5
2
Ø11
82
1
3
20
® Ø20
Ø20x35
75
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
5
TM60190067
Gewicht / poids / weight
4
Best. Nr.: réf. article part-no.
Orig.-Nr. réf. origine orig.-part-no.
1
Schlegel fléau / flail
63-MUL-52
2
Schäkel manille / shackle
63-MUL-72 TM60070143 0,150
3
Aluminium Buchse entretoise en aluminium / aluminium bush
63-MUL-63 TM60070146 0,014
4
Schraube mit Sicherungsmutter-10.9 boulon avec écrou à freinage interne-10.9 bolt with self-locking nut-10.9
63-71682
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! Gruppe 3 Seite 116 La référence d´origine présentée ci-dessus ne sert qu´à la coordination!
groupe/section 3 page 116
Gewicht poids weight
The original part-numbers are only indicated for comparison!
0,340
0,080
Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved
Mulag
12.12
Hammerschlegel und Schlegelmesser
Marteaux broyeurs et couteaux pour débroussailleuses Pruning hammers and flail mover blades
Mulag 4
40
11,5
80
Ø12,5
63-MUL-54
138485
0,280
Schäkel manille / shackle
63-MUL-73
181686
0,238
3
Buchse entretoise / bush
63-MUL-64
186653
0,050
4
Schraube mit Sicherungsmutter-10.9 boulon avec écrou à freinage interne-10.9 bolt with self-locking nut-10.9
63-71682
101616 101537
0,080
Mulag
Mulag
63-MUL-02-R re/dr/ri 63-MUL-02-L li/ga/le
63-MUL-62 Abscherbolzen Ø10,5 piton de sûreté à cisaillement shear pin
Ø13
Abb. rechts fig. droite ill. right
170
Ø9,5
57
8
88
50
150
40
Ø5
58
Messer couteau blade
Gewicht poids weight
Ø15
TM60190012 TM60190039 1,170
Orig.-Nr. / réf. origine / orig.-part-no. re/dr/ri Orig.-Nr. / réf. origine / orig.-part-no. li/ga/le Gewicht / poids / weight
Orig.-Nr. / réf. origine / orig.-part-no.
SM35-06-0179
Gewicht / poids / weight
0,310
Mulag ®
3 95
25
40
47
2
54
11
26
Ø11
Ø12
1
Y-Messer couteau-Y / Y-blade
2
4 84
8
1
7/16”
17
Ø14x35
Ø20
37
Orig.-Nr. réf. origine orig.-part-no.
Best. Nr.: réf. article part-no.
Gewicht poids weight
63-ROU-51
0,180
Schäkel manille / shackle
63-ROU-72
0,120
3
Buchse entretoise / bush
63-ROU-62
0,035
4
Schraube mit Sicherungsmutter-10.9 boulon avec écrou à freinage interne-10.9 bolt with self-locking nut-10.9
63-71684
0,080
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! 12.12 La référence d´origine présentée ci-dessus ne sert qu´à la coordination! The original part-numbers are only indicated for comparison!
Gruppe 3 Seite 117 groupe/section 3 page 117
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
48,5 23
2
Orig.-Nr. réf. origine orig.-part-no.
7
2
Schlegel fléau / flail
20
7/16”
63
Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding
1 1
Best. Nr.: réf. article part-no.
82
Ø14.5
22
98
10
Ø25
3
Ø16x34
Hammerschlegel und Schlegelmesser
Marteaux broyeurs et couteaux pour débroussailleuses Pruning hammers and flail mover blades
Mulag
Mulag
63-16115-1
2 25,5 61
für 63-RM-14 pour 63-RM-14 for 63-RM-14
Ø16
70 R=
1
63-ROU-61
63-ROU-82
5 Ø17
115
50
64
5
Orig.-Nr. / réf. origine / orig.-part-no.
6,5
25
Ø31,5
Ø17
63-ROU-83
M16x1,5
3
Gewicht / poids / weight
0,395
4 Ø32,5
Orig.-Nr. réf. origine orig.-part-no.
Gewicht poids weight
63-RM-14
TM60-07-0223
0,600
Best. Nr.: réf. article part-no.
1
Hammerschlegel marteau broyeur / pruning hammer
2
Distanzbuchse entretoise d´écartement / distance bush
63-ROU-61
TM60-07-0224
0,100
3
Distanzscheibe rondelle d´écartement / distance washer
63-ROU-82
TM60-07-0225
0,020
4
Elastische Distanzscheibe rondelle élastique / elastic washer
63-ROU-83
TM60-07-0226
0,025
5
Schraube mit Sicherungsmutter - 8.8 boulon avec écrou à freinage interne - 8.8 bolt with self-locking nut - 8.8
63-16115
Schraube TM60-07-0227 Mutter TM60-07-0228
0,250
Mulag 63-MUL-80
®
Ø8
5
2
Y-Messer mit Kette couteau-Y avec chaîne Y-blade with chain Schraube mit Sicherungsmutter-10.9 boulon avec écrou à freinage interne-10.9 bolt with self-locking nut-10.9
30
M8x1,25
35
1
2
1 13
Ø8,5
110
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
63-16115
63-830
Best. Nr.: réf. article part-no.
Orig.-Nr. réf. origine orig.-part-no.
63-MUL-80
TM60-04-0131
0,250
63-830
Schraube SM35-07-0233 Mutter SB35-09-0641
0,022
Gewicht poids weight Satz Schlagmesser komplett: (Mähbreite 1,2m - 40 Messer) Orig.-Nr. SB35-07-0123
Jeu complet des couteaux frappeurs (Largeur de coupe 1,2m - 40 couteaux) Complete set of impact blades (Mowing width 1,2m - 40 blades)
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! Gruppe 3 Seite 118 La référence d´origine présentée ci-dessus ne sert qu´à la coordination!
groupe/section 3 page 118
The original part-numbers are only indicated for comparison!
Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved
Ø24
57,5
Schrauben-Satz M16x1,5 ensemble visserie kit
12.12
Hammerschlegel und Schlegelmesser
Marteaux broyeurs et couteaux pour débroussailleuses Pruning hammers and flail mover blades
Mulag
Muratori
63-MUL-88 55 45,75
8
Abscherbolzen piton de sûreté à cisaillement shear pin
161
Ø6
Y-Messer couteau-Y / Y-blade 60
Ø25,5
Ø9
Ø25
M12
Orig.-Nr. / réf. origine / orig.-part-no.
164891 0,780
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
Muratori
Muratori
63-RM-10-20
Hammerschlegel marteau broyeur pruning hammer
0,650
Gewicht / poids / weight
Muratori
63-RM-10-16
150 60
Ø 24
Ø40
25,5
Ø24,5
37
Ø24,5
Ø25
10
63-AGM-03
Hammerschlegel marteau broyeur pruning hammer
Y-Messer couteau-Y / Y-blade 40
55
Ø20,5
55
20,5
8
R=
R=
100
100
120
16,5
150
52
150
Orig.-Nr. / réf. origine / orig.-part-no.
1,770
Gewicht / poids / weight
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
1,850
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
0,300
Muratori
63-AGM-04
®
Y-Messer couteau-Y / Y-blade 35
Ø14,5
114
5
42
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
0,200
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! 12.12 La référence d´origine présentée ci-dessus ne sert qu´à la coordination! The original part-numbers are only indicated for comparison!
Gruppe 3 Seite 119 groupe/section 3 page 119
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
Ø25
Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding
63-AGM-01
Hammerschlegel und Schlegelmesser
Marteaux broyeurs et couteaux pour débroussailleuses Pruning hammers and flail mover blades
Muratori
Maschinentyp: modèle de machine: machine type:
1
17
MT 211
2 14,5
108
Hammerschlegel marteau broyeur pruning hammer
Muratori
Schraube 60007100 Mutter 62010800
63-1450
0,100
Müthing
63-RM-79
63-ZAP-12
Hammerschlegel marteau broyeur pruning hammer
Y-Messer couteau-Y / Y-blade 35
10
14,5
Ø10,5
4
0 10 R=
42 85
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
0,365
Orig.-Nr. / réf. origine / orig.-part-no.
00003435
Gewicht / poids / weight
0,110
Müthing 10
2
47
10
1
Ø10,5
Ø13x25,5
Ø13x25,5 47
70
3
0 R6 6
70
R7
0 6
Best. Nr.: réf. article part-no.
1 Ø1
Orig.-Nr. réf. origine orig.-part-no.
Gewicht poids weight
1
Hammerschlegel marteau broyeur / pruning hammer
63-RM-806
0,300
2
Hammerschlegel marteau broyeur / pruning hammer
63-RM-807
0,240
3
Schäkel manille / shackle
63-MUE-99
0,125
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! Gruppe 3 Seite 120 La référence d´origine présentée ci-dessus ne sert qu´à la coordination!
groupe/section 3 page 120
Ø25
48 26
45
®
32
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
50
63-RM-7-14M 12019400 0,830
Schraube mit Sicherungsmutter-10.9 boulon avec écrou à freinage interne-10.9 bolt with self-locking nut-10.9
2
Orig.-Nr. Gewicht réf. origine poids orig.-part-no. weight
98
1
34
Best. Nr.: réf. article part-no.
The original part-numbers are only indicated for comparison!
Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved
R= 105
M14x2
12.12
Hammerschlegel und Schlegelmesser
Marteaux broyeurs et couteaux pour débroussailleuses Pruning hammers and flail mover blades
Müthing 63-14115
Schraube mit Sicherungsmutter-10.9 boulon avec écrou à freinage interne-10.9 bolt with self-locking nut-10.9
105 17
M14x1,5
Orig.-Nr. / réf. origine / orig.-part-no.
MU00980509
Gewicht / poids / weight
0,176
SW-27
SW-27
3
1
100
85
2 M16x1,5
40
28
22
M16x2
R=
98
16,5
Best. Nr.: réf. article part-no.
Orig.-Nr. réf. origine orig.-part-no.
1
Hammerschlegel marteau broyeur / pruning hammer
2
Schraube mit Sicherungsmutter-10.9 boulon avec écrou à freinage interne-10.9 bolt with self-locking nut-10.9
63-1685
3
Schraube mit Sicherungsmutter-10.9 boulon avec écrou à freinage interne-10.9 bolt with self-locking nut-10.9
63-16101 2404004048
137
63-RM-30 2405003055 980416
Gewicht poids weight
1,080 0,170 0,220
Müthing ®
3 21
M14x2 20
Ø16
90
12
80
1
4
Ø24
Ø17x34,5
51
30
48 23
2
14,5
Ø13
Best. Nr.: réf. article part-no.
Orig.-Nr. réf. origine orig.-part-no.
Gewicht poids weight
1
Schlegel fléau / flail
63-MUE-06 MU000449
0,320
2
Schäkel manille / shackle
63-TUR-72 MU000507
0,230
3
Buchse entretoise / bush
63-TUR-81 MU000560
0,040
4
Schraube mit Sicherungsmutter-12.9 boulon avec écrou à freinage interne-12.9 bolt with self-locking nut-12.9
63-TUR-91 MU980509 Mutter MU980501
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! 12.12 La référence d´origine présentée ci-dessus ne sert qu´à la coordination! The original part-numbers are only indicated for comparison!
Schraube
0,176
Gruppe 3 Seite 121 groupe/section 3 page 121
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
Müthing
73
Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding
SW22
Hammerschlegel und Schlegelmesser
Marteaux broyeurs et couteaux pour débroussailleuses Pruning hammers and flail mover blades
Mörtl
Mörtl
63-NOB-05
63-OMA-05 Schlegel fléau 75 flail
Y-Messer couteau-Y / Y-blade
10
204
8
100
57
Orig.-Nr. / réf. origine / orig.-part-no.
27781
Gewicht / poids / weight
Orig.-Nr. / réf. origine / orig.-part-no.
027845
0,920
1,330
Gewicht / poids / weight
3
30
8
38
2
100
Ø13,5
1
Ø12,5
5
4 Ø28
30 Ø20
7
150
35
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
Nicolas
75
35
M10x1,5
®
Best. Nr.: réf. article part-no.
Orig.-Nr. Gewicht réf. origine poids orig.-part-no. weight
1
Schlegel kpl. montiert fléau compl. flail compl.
63-NIC-00
1,070
2
Klinge lame / blade
63-NIC-01
0,550
3
Halter support / holder
63-NIC-02
0,420
4
Buchse entretoise / bush
63-NIC-61
0,070
63-1035
0,030
5
Schraube mit Sicherungsmutter-8.8 boulon avec écrou à freinage interne-8.8 bolt with self-locking nut-8.8
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! Gruppe 3 Seite 122 La référence d´origine présentée ci-dessus ne sert qu´à la coordination!
groupe/section 3 page 122
The original part-numbers are only indicated for comparison!
Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved
26
Ø25,5
190
60
44
12.12
Hammerschlegel und Schlegelmesser
Marteaux broyeurs et couteaux pour débroussailleuses Pruning hammers and flail mover blades
Nicolas
Nicolas
63-16115-1
2
Schrauben-Satz M16x1,5 ensemble visserie kit
Ø24
25,5
61
Ø16
für 63-RM-14 pour 63-RM-14 for 63-RM-14
70 R=
63-ROU-61
50
Ø17
63-ROU-82
5
64
35
63-ROU-83 115
6
4
Ø24
3
Ø31,5
Orig.-Nr. / réf. origine / orig.-part-no.
Ø17
25
M16x1,5
Ø17
5 Best. Nr.: réf. article part-no.
Ø32,5
1
Hammerschlegel marteau broyeur / pruning hammer
2
Orig.-Nr. réf. origine orig.-part-no.
Gewicht poids weight
63-RM-14
0,600
Distanzbuchse entretoise d´écartement / distance bush
63-ROU-61
0,100
3
Buchse entretoise / bush
63-ROU-63
0,070
4
Distanzscheibe rondelle d´écartement / distance washer
63-ROU-82
0,020
5
Elastische Distanzscheibe rondelle élastique / elastic washer
63-ROU-83
0,025
6
Schraube mit Sicherungsmutter - 8.8 boulon avec écrou à freinage interne - 8.8 bolt with self-locking nut - 8.8
63-16115
0,250
Nobili
63-16115
Gewicht / poids / weight
0,395
Nicolas
63-16115-2 Schrauben-Satz M16x1,5 ensemble visserie kit
für 63-RM-14 pour 63-RM-14 for 63-RM-14
63-16115
63-ROU-63 63-ROU-83
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
0,395
Nobili
63-RM-2
Hammerschlegel marteau broyeur pruning hammer
20,5
Hammerschlegel marteau broyeur pruning hammer
63-RM-4
®
86 R= 110
40
R= 110
16,5
5 15
120
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
1,800
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
1,350
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! 12.12 La référence d´origine présentée ci-dessus ne sert qu´à la coordination! The original part-numbers are only indicated for comparison!
Gruppe 3 Seite 123 groupe/section 3 page 123
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
1
6,5
Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding
57,5
Hammerschlegel und Schlegelmesser
Marteaux broyeurs et couteaux pour débroussailleuses Pruning hammers and flail mover blades
Nobili 26
R= 18 0 Ø25 70
Ø11
57 50
77
M20x2,5
1
Hammerschlegel marteau broyeur / pruning hammer
2
Orig.-Nr. réf. origine orig.-part-no.
1,330
Bolzen piton / bolt
63-KUH-900
0,460
3
Selbstsichernde Sechskantmutter écrou hexagonal à freinage interne self-locking hexagon nut
63-KUH-901
0,050
4
Halter bride de support / holder
63-HAL-01
0,530
63-NOB-04 Gerades-Messer couteau droit straight blade
Y-Messer couteau-Y / Y-blade
60
Ø16,5
Ø25,5
175
8
10
60
Orig.-Nr. / réf. origine / orig.-part-no.
0,450
Gewicht / poids / weight
Nobili
Gewicht / poids / weight
0,850
63-RM-24
®
Hammerschlegel marteau broyeur pruning hammer
Y-Messer couteau-Y / Y-blade
60
Orig.-Nr. / réf. origine / orig.-part-no.
Nobili
63-NOB-05
51
Ø25,5
26
10
87
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
205
18
57
0,920
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
1,075
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! Gruppe 3 Seite 124 La référence d´origine présentée ci-dessus ne sert qu´à la coordination!
groupe/section 3 page 124
Gewicht poids weight
63-RM-46
Nobili
63-NOB-02
40
Best. Nr.: réf. article part-no.
204
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
Nobili
22
204
4
30
3
Ø2
7
115
24
M20x2,5
2
5
49
1
75
46
The original part-numbers are only indicated for comparison!
Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved
50
12.12
Hammerschlegel und Schlegelmesser
Marteaux broyeurs et couteaux pour débroussailleuses Pruning hammers and flail mover blades
Nobili Ø14,5
35
1
158
80
Ø35
Messer couteau / blade
63-NOB-07
0,620
2
Halter support / holder
63-NOB-08
0,580
3
Buchse entretoise bush
63-NOB-09
0,150
Nobili
63-NOB-10
63-NOB-11 Gedrehtes-Messer couteau torsadé twisted blade
Y-Messer couteau-Y / Y-blade
40
Ø16,5
Ø16,5
180
140
8
8
40
42
Orig.-Nr. / réf. origine / orig.-part-no.
Orig.-Nr. / réf. origine / orig.-part-no.
0,450
Gewicht / poids / weight
Gewicht / poids / weight
0,320
2
3
Nobili
80
60
4 40
M16x2
Ø17
3
Ø25
8
245
1
28
Ø35
®
Ø25,5
Ø16,5
60
Orig.-Nr. réf. origine orig.-part-no.
Best. Nr.: réf. article part-no.
Gewicht poids weight
1
Y-Messer couteau-Y / Y-blade
63-FEI-02
0,960
2
Buchse entretoise / bush
63-FEI-63
0,054
3
Scheibe rondelle / washer
63-FEI-64
0,020
4
Schraube mit Sicherungsmutter-10.9 boulon avec écrou à freinage interne-10.9 bolt with self-locking nut-10.9
63-1660
0,150
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! 12.12 La référence d´origine présentée ci-dessus ne sert qu´à la coordination! The original part-numbers are only indicated for comparison!
Gruppe 3 Seite 125 groupe/section 3 page 125
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
Nobili
Gewicht poids weight
1
54
3
Orig.-Nr. réf. origine orig.-part-no.
Best. Nr.: réf. article part-no.
54 7
Ø25,5
Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding
7
94
Ø15
2
Hammerschlegel und Schlegelmesser
Marteaux broyeurs et couteaux pour débroussailleuses Pruning hammers and flail mover blades
Nobili
63-NOB-06
Y-Messer couteau-Y / Y-blade
60
Ø20,5
40
Ø25,5
55
50
0,460
63-NOB-38
Gewicht / poids / weight
0,450
63-NOB-17
Gerades Messer couteau droit / straight blade 45
1,020
Gewicht / poids / weight
Orig.-Nr. / réf. origine / orig.-part-no.
Nobili
Gerades Messer couteau droit / straight blade 40
Ø16,5
Ø16,5 8
125
132
8
Orig.-Nr. / réf. origine / orig.-part-no.
0,310
Gewicht / poids / weight
Orig.-Nr. / réf. origine / orig.-part-no.
0,295
Gewicht / poids / weight
Nobili ®
1
2
36
115
M16x2
Orig.-Nr. réf. origine orig.-part-no.
Gewicht poids weight
63-RM-43
1891002
1,240
Best. Nr.: réf. article part-no.
1
Hammerschlegel marteau broyeur / pruning hammer
2
Schraube - 10.9 boulon - 10.9 bolt - 10.9
63-1691
J1891003
0,170
Selbstsichernde Sechskantmutter écrou hexagonal à freinage interne self-locking hexagon nut
51-1051
606.11.76
0,030
M16x2
3
22
91
16
R= 11 0
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
Nobili
60
Orig.-Nr. / réf. origine / orig.-part-no.
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
Ø16,5 8
10
130
10
Y-Messer couteau-Y / Y-blade
200
50
63-WET-01
Winkelmesser couteau équerre L-blade
3
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! Gruppe 3 Seite 126 La référence d´origine présentée ci-dessus ne sert qu´à la coordination!
groupe/section 3 page 126
The original part-numbers are only indicated for comparison!
Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved
63-NOB-12
Nobili
160
Nobili
12.12
Hammerschlegel und Schlegelmesser
Marteaux broyeurs et couteaux pour débroussailleuses Pruning hammers and flail mover blades
Nobili
Nobili
63-NOB-16
63-NOB-18 Mittelschlegel fléau central central flail
Y-Messer couteau-Y / Y-blade
Ø16,5
45
8
8
135
8
Orig.-Nr. / réf. origine / orig.-part-no.
0,330
Gewicht / poids / weight
Nobili
Orig.-Nr. / réf. origine / orig.-part-no.
1551128
0,550
Gewicht / poids / weight
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
0,370
Nobili
63-NOB-35
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
63-NOB-34
Y-Messer couteau-Y / Y-blade
Ø16,5
35
Ø14x30
8
235
6
90
Gerades-Messer couteau droit straight blade 40
56
34
42
125
200
Ø16,5
44
Orig.-Nr. / réf. origine / orig.-part-no.
0,550
Gewicht / poids / weight
Nobili
63-NOB-41
0,140
Gewicht / poids / weight
63-NOB-37
®
Y-Messer couteau-Y / Y-blade 40
Orig.-Nr. / réf. origine / orig.-part-no.
Nobili Schlegel fléau flail
Ø16,5
Ø17
40
8
R= 11 2
100
41
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
6
124
130
Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding
63-NOB-27
Ø26
Y-Messer couteau-Y / Y-blade 40
Nobili
0,310
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
0,470
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! 12.12 La référence d´origine présentée ci-dessus ne sert qu´à la coordination! The original part-numbers are only indicated for comparison!
Gruppe 3 Seite 127 groupe/section 3 page 127
Hammerschlegel und Schlegelmesser
Marteaux broyeurs et couteaux pour débroussailleuses Pruning hammers and flail mover blades
Noremat
Noremat
63-16115-1
2 Ø24
25,5 61
für 63-RM-14 pour 63-RM-14 for 63-RM-14
Ø16
70 R=
1
Schrauben-Satz M16x1,5 ensemble visserie kit
63-ROU-61
50
64
Ø17
6,5
35
6
115
5
63-ROU-82
4
Ø24
3
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
63-16115
Orig.-Nr. / réf. origine / orig.-part-no.
Ø31,5
M16x1,5 25
Ø17
Ø17
5
Ø32,5
63-ROU-83
Orig.-Nr. réf. origine orig.-part-no.
Gewicht poids weight
63-RM-14
1.39.207
0,600
Best. Nr.: réf. article part-no.
1
Hammerschlegel marteau broyeur / pruning hammer
2
Distanzbuchse entretoise d´écartement / distance bush
63-ROU-61
103031
0,100
3
Buchse entretoise / bush
63-ROU-63
103032
0,070
4
Distanzscheibe rondelle d´écartement / distance washer
63-ROU-82
1.46.605
0,020
5
Elastische Distanzscheibe rondelle élastique / elastic washer
63-ROU-83
1.29.601
0,025
6
Schraube mit Sicherungsmutter - 8.8 boulon avec écrou à freinage interne - 8.8 bolt with self-locking nut - 8.8
Schraube
63-16115
103081 Mutter
103021
0,250
Gewicht / poids / weight
Noremat
63-16115-2 Schrauben-Satz M16x1,5 ensemble visserie kit
für 63-RM-14 pour 63-RM-14 for 63-RM-14
63-16115
63-ROU-63 63-ROU-83
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
®
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! Gruppe 3 Seite 128 La référence d´origine présentée ci-dessus ne sert qu´à la coordination!
groupe/section 3 page 128
0,395
The original part-numbers are only indicated for comparison!
0,395
Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved
57,5
12.12
Hammerschlegel und Schlegelmesser
Marteaux broyeurs et couteaux pour débroussailleuses Pruning hammers and flail mover blades
Noremat
Noremat
63-16115-1
2 61
für 63-RM-800 pour 63-RM-800 for 63-RM-800
Ø16
75
R=
1
68
63-ROU-61
60
Ø24
3 35
6
63-ROU-83 115
5
4 Ø31,5
M16x1,5 25
Ø17
Ø17
5 Best. Nr.: réf. article part-no.
Ø32,5
63-16115
63-ROU-82
Ø17
6,5
Orig.-Nr. réf. origine orig.-part-no.
Gewicht poids weight
1
Hammerschlegel marteau broyeur / pruning hammer
63-RM-800
SM62
0,760
2
Distanzbuchse entretoise d´écartement / distance bush
63-ROU-61
FG24x61
0,100
3
Buchse entretoise / bush
63-ROU-63
SM61
0,070
4
Distanzscheibe rondelle d´écartement / distance washer
63-ROU-82
0,020
5
Elastische Distanzscheibe rondelle élastique / elastic washer
63-ROU-83
0,025
6
Schraube mit Sicherungsmutter - 8.8 boulon avec écrou à freinage interne - 8.8 bolt with self-locking nut - 8.8
Schraube
63-16115
1001490 Mutter
102421
0,250
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
0,395
Noremat
63-16115-2 Schrauben-Satz M16x1,5 ensemble visserie kit
für 63-RM-800 pour 63-RM-800 for 63-RM-800
63-16115
63-ROU-63 63-ROU-83
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
0,395
Noremat
63-MUL-54
®
Schlegel fléau flail Ø16x34 10
98
Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding
Schrauben-Satz M16x1,5 ensemble visserie kit
Ø24
26
40
Orig.-Nr. / réf. origine / orig.-part-no.
103070
Gewicht / poids / weight
0,280
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! 12.12 La référence d´origine présentée ci-dessus ne sert qu´à la coordination! The original part-numbers are only indicated for comparison!
Gruppe 3 Seite 129 groupe/section 3 page 129
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
58
Hammerschlegel und Schlegelmesser
Marteaux broyeurs et couteaux pour débroussailleuses Pruning hammers and flail mover blades
Noremat 1
48
8
60
95
Ø15,5
Ø16x41
2
Ø13
Orig.-Nr. réf. origine orig.-part-no.
Best. Nr.: réf. article part-no.
41
1
Y-Messer couteau-Y / Y-blade
63-UNI-06
2
Schäkel manille shackle
63-UNI-07
Gewicht poids weight
0,210 0,200
103067
1
2
48
Ø15,5
Ø16x38
100
8
60
45
Ø13 40
50
Best. Nr.: réf. article part-no.
Orig.-Nr. réf. origine orig.-part-no.
Gewicht poids weight
1
Y-Messer couteau-Y / Y-blade
63-UNI-05
103059
0,190
2
Schäkel manille shackle
63-UNI-07
103067
0,200
Noremat Ø20
25
5 84
1
31
47
54
2
4
Ø12 7/16”
Orig.-Nr. réf. origine orig.-part-no.
Gewicht poids weight
63-SMA-51
103006
0,120
Best. Nr.: réf. article part-no.
1
Y-Messer couteau-Y / Y-blade
2
Schäkel manille / shackle
63-ROU-72
103065
0,120
3
Buchse entretoise / bush
63-ROU-62
103037
0,035
4
Schraube mit Sicherungsmutter-10.9 boulon avec écrou à freinage interne-10.9 bolt with self-locking nut-10.9
26
Ø11
3
84
Ø13x26
17
®
40
11
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
Noremat
Schraube
63-71684
103085 Mutter
103022
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! Gruppe 3 Seite 130 La référence d´origine présentée ci-dessus ne sert qu´à la coordination!
groupe/section 3 page 130
The original part-numbers are only indicated for comparison!
0,080
Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved
40
12.12
Hammerschlegel und Schlegelmesser
Marteaux broyeurs et couteaux pour débroussailleuses Pruning hammers and flail mover blades
Noremat Ø15x34
Ø15
91
6
1
2
Ø13,5 40
Ø15
Ø10,5
25,5
3
Ø24 Ø16
5
26,5
85
4
M10x1,5
Best. Nr.: réf. article part-no.
Orig.-Nr. réf. origine orig.-part-no.
Gewicht poids weight
1
Hammerschlegel marteau broyeur / pruning hammer
63-SMA-52
100111
0,200
2
Schäkel manille / shackle
63-BOM-72
100118
0,150
3
Innenbuchse entretoise interne / internal bush
63-BOM-62
100107
0,020
4
Außenbuchse entretoise externe / external bush
63-BOM-61
100109
0,050
5
Schraube mit Sicherungsmutter-10.9 boulon avec écrou à freinage interne-10.9 bolt with self-locking nut-10.9
63-1085
100115
0,075
Noremat ® Ø24
Ø16x35
21
Ø16
40
48 23
73
14,5
Ø13
20
M14x2
1
2
90
95
12
4
3
Orig.-Nr. réf. origine orig.-part-no.
Gewicht poids weight
63-TUR-51
103074
0,260
Best. Nr.: réf. article part-no.
1
Schlegel fléau / flail
2
Schäkel manille / shackle
63-TUR-72
103075
0,230
3
Buchse entretoise / bush
63-TUR-81
103076
0,040
4
Schraube mit Sicherungsmutter-12.9 boulon avec écrou à freinage interne-12.9 bolt with self-locking nut-12.9
63-TUR-91
Schraube
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! 12.12 La référence d´origine présentée ci-dessus ne sert qu´à la coordination! The original part-numbers are only indicated for comparison!
103077 Mutter
0,150
103019
Gruppe 3 Seite 131 groupe/section 3 page 131
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
32
Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding
46
8,5
45
50
Hammerschlegel und Schlegelmesser
Marteaux broyeurs et couteaux pour débroussailleuses Pruning hammers and flail mover blades
Noremat 42 16
Ø20
25
Ø12
85
41
4
47
2 11
84
26
54
17
Orig.-Nr. réf. origine orig.-part-no.
Gewicht poids weight
63-RM-17
100113
0,440
Best. Nr.: réf. article part-no.
1
Hammerschlegel marteau broyeur / pruning hammer
2
Schäkel manille / shackle
63-ROU-72
103065
0,120
3
Innenbuchse entretoise interne / internal bush
63-ROU-62
103037
0,035
4
Schraube mit Sicherungsmutter-10.9 boulon avec écrou à freinage interne-10.9 bolt with self-locking nut-10.9
63-71684
Schraube
0,080
103085 Mutter
103022
Noremat 8
1
®
4
3
7/16”
35
11,5
66
48 26
2
17
84
Ø20
Ø14x34 103
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
7/16”
Ø11
Ø11
25
Ø12
Best. Nr.: réf. article part-no.
Orig.-Nr. réf. origine orig.-part-no.
Gewicht poids weight
1
Schlegel fléau / flail
63-ROU-52
103051
0,200
2
Schäkel manille / shackle
63-ROU-71
103068
0,150
3
Buchse entretoise / bush
63-ROU-62
103037
0,035
4
Schraube mit Sicherungsmutter-10.9 boulon avec écrou à freinage interne-10.9 bolt with self-locking nut-10.9
Schraube
63-71684
103085 Mutter
103022
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! Gruppe 3 Seite 132 La référence d´origine présentée ci-dessus ne sert qu´à la coordination!
groupe/section 3 page 132
The original part-numbers are only indicated for comparison!
0,080
Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved
3
70 32
1
12.12
Hammerschlegel und Schlegelmesser
Marteaux broyeurs et couteaux pour débroussailleuses Pruning hammers and flail mover blades
Oehler
Noremat
Hammerschlegel marteau broyeur pruning hammer
Ø15
50
M14x2
5 132
1
40
Y-Messer couteau-Y / Y-blade
2
Schraube mit Sicherungsmutter-12.9 boulon avec écrou à freinage interne-12.9 bolt with self-locking nut-12.9
63-ROU-54
OMARV
0,210
63-1450
0,100
Schlegel fléau flail
80
105
140
8
47
30
40 Ø15
Ø12,5
7
47
80
Orig.-Nr. / réf. origine / orig.-part-no.
0,680
Gewicht / poids / weight
1,600
63-ZZZ-35
Schlegel fléau flail
8
80
Orig.-Nr. / réf. origine / orig.-part-no.
OMARV
63-ZZZ-34
Ø12,5
137
Gewicht / poids / weight
OMARV
63-ZZZ-33 Schlegel fléau flail
103039
OMARV
Orig.-Nr. / réf. origine / orig.-part-no.
0,500
Gewicht / poids / weight
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
0,480
OMARV
63-ZZZ-36
63-ZZZ-10
®
Y-Messer couteau-Y / Y-blade
Schlegel fléau flail
Ø12,5
50
8 143
Ø25,5 10
80
48
61
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
0,550
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
0,710
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! 12.12 La référence d´origine présentée ci-dessus ne sert qu´à la coordination! The original part-numbers are only indicated for comparison!
Gruppe 3 Seite 133 groupe/section 3 page 133
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
1
Gewicht poids weight
120
43
Orig.-Nr. réf. origine orig.-part-no.
R= 95
16,5
Best. Nr.: réf. article part-no.
130
Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding
63-RM-6
2
34
40
Hammerschlegel und Schlegelmesser
Marteaux broyeurs et couteaux pour débroussailleuses Pruning hammers and flail mover blades
OMARV 3
1
R= 110
Best. Nr.: réf. article part-no.
120
M18x1,5
100 47
3
Hammerschlegel marteau broyeur / pruning hammer
2
Distanzscheibe rondelle de calage / distance wascher
3
Schraube mit Sicherungsmutter-10.9 boulon avec écrou à freinage interne-10.9 bolt with self-locking nut-10.9
OMARV
Gewicht poids weight
CL00325
1,350
63-1001
0,020
63-18100
0,290
OMARV
63-RM-6-18
2
1
Hammerschlegel marteau broyeur pruning hammer
90
40 16,5
40
40
Hammerschlegel marteau broyeur / pruning hammer
63-RM-4
2
Schraube mit Sicherungsmutter-10.9 boulon avec écrou à freinage interne-10.9 bolt with self-locking nut-10.9
63-1690
OMARV
CL00323
1,350 0,200
60
Winkelmesser couteau équerre L-blade
60
Ø25,5 10
Ø25,5
10
204
204
10
57
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
0,850
Orig.-Nr. / réf. origine / orig.-part-no.
CL00322
Gewicht / poids / weight
0,920
50
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! Gruppe 3 Seite 134 La référence d´origine présentée ci-dessus ne sert qu´à la coordination!
groupe/section 3 page 134
1,560
63-NOB-06
Y-Messer couteau-Y / Y-blade
Ø25,5
Orig.-Nr. / réf. origine / orig.-part-no.
OMARV
63-NOB-05
®
Gerades-Messer couteau droit straight blade
137
Gewicht / poids / weight
OMARV
63-NOB-04
60
Gewicht poids weight
200
1
18,5
Orig.-Nr. réf. origine orig.-part-no.
95
Best. Nr.: réf. article part-no.
120
M16x2
R=
R= 110
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
63-RM-4-18
1
Orig.-Nr. réf. origine orig.-part-no.
The original part-numbers are only indicated for comparison!
1,020
Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved
18,5
Ø30
Ø19
40
2
12.12
Hammerschlegel und Schlegelmesser
Marteaux broyeurs et couteaux pour débroussailleuses Pruning hammers and flail mover blades
OMARV
63-RM-7-16
Schlegel fléau flail
44
75
16,5
22
14,5
R= 10 5
8
R= 105
100
108
Orig.-Nr. / réf. origine / orig.-part-no.
0,830
Gewicht / poids / weight
0,780
Gewicht / poids / weight
63-OMA-06
Orig.-Nr. / réf. origine / orig.-part-no.
CL 00314
Gewicht / poids / weight
63-NOB-16
63-BOM-81 Hammerschlegel marteau broyeur pruning hammer
Y-Messer couteau-Y / Y-blade
Y-Messer couteau-Y / Y-blade 40
Ø25,5
33
26
140
10
R1 10
54
Orig.-Nr. / réf. origine / orig.-part-no.
0,520
Gewicht / poids / weight
Orsi
63-AGM-03
Ø16,5 8
55
CL00309
1,330
Orsi
Orsi
OMARV
50
Orig.-Nr. / réf. origine / orig.-part-no.
135
108
42
64
Orig.-Nr. / réf. origine / orig.-part-no.
0,615
Gewicht / poids / weight
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
0,330
Orsi
63-RM-20
®
Hammerschlegel marteau broyeur pruning hammer
Y-Messer couteau-Y / Y-blade 40
25,5
41
Ø20,5 8
120
Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding
22
63-OMA-05
Hammerschlegel marteau broyeur / pruning hammer
52
65
Orig.-Nr. / réf. origine / orig.-part-no.
00023004
Gewicht / poids / weight
0,300
5
11
R=
78
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
1,120
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! 12.12 La référence d´origine présentée ci-dessus ne sert qu´à la coordination! The original part-numbers are only indicated for comparison!
Gruppe 3 Seite 135 groupe/section 3 page 135
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
Hammerschlegel marteau broyeur / pruning hammer
26
63-RM-7-14
OMARV
190
OMARV
Hammerschlegel und Schlegelmesser
Marteaux broyeurs et couteaux pour débroussailleuses Pruning hammers and flail mover blades
Orsi
63-RM-48
Orsi
63-ORS-02
Hammerschlegel marteau broyeur pruning hammer
63-ORS-04 Gedrehtes-Messer couteau torsadé twisted blade
Schäkel manille / shackle
5 Ø25,
48
Ø12,5
26
52
152
38
R1 35
Ø11
60
58
75
Orig.-Nr. / réf. origine / orig.-part-no.
0,850
Gewicht / poids / weight
Orig.-Nr. / réf. origine / orig.-part-no.
0,125
Gewicht / poids / weight
Orsi
Orsi
63-ORS-05
63-ORS-06
Gewicht / poids / weight
63-ORS-08
Y-Messer couteau-Y / Y-blade 40
60 Ø26
Schäkel manille / shackle 49 22,5
Ø16,5x34 8
98
141
8
0,550
14,5
Y-Messer couteau-Y / Y-blade
Orig.-Nr. / réf. origine / orig.-part-no.
Orsi
56
Ø13
43 45
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
0,500
Gewicht / poids / weight
0,230
Orsi
Orsi
63-ORS-09
Orig.-Nr. / réf. origine / orig.-part-no.
63-ORS-10
®
Schäkel manille / shackle 60
16,5
Gewicht / poids / weight
0,200
63-RM-86 Hammerschlegel marteau broyeur pruning hammer
Y-Messer couteau-Y / Y-blade 49 22,5
Orig.-Nr. / réf. origine / orig.-part-no.
Orsi
Ø25,5
225
8
14
12
Ø13
R= 64
56
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
10
107
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
0,200
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
0,950
62
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! Gruppe 3 Seite 136 La référence d´origine présentée ci-dessus ne sert qu´à la coordination!
groupe/section 3 page 136
The original part-numbers are only indicated for comparison!
0,220
Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved
Orsi
12.12
Hammerschlegel und Schlegelmesser
Marteaux broyeurs et couteaux pour débroussailleuses Pruning hammers and flail mover blades
Orsi
Orsi
63-ZZZ-11 Y-Messer couteau-Y / Y-blade
40
63-RM-99
Y-Messer couteau-Y / Y-blade
Hammerschlegel marteau broyeur / pruning hammer
Ø20,5
40
58
Ø17x35
31
8 94
150
8
0
8 R= 43
70
39
Orig.-Nr. / réf. origine / orig.-part-no.
0,210
Gewicht / poids / weight
Orig.-Nr. / réf. origine / orig.-part-no.
0,360
Gewicht / poids / weight
Orig.-Nr. / réf. origine / orig.-part-no.
1,730
Gewicht / poids / weight
1
48
Y-Messer couteau-Y / Y-blade
2
Schäkel manille shackle
55
Orig.-Nr. réf. origine orig.-part-no.
Gewicht poids weight
CL00323
0,260
63-MUL-71
0,110
20,5
100
Best. Nr.: réf. article part-no.
63-FEI-15
150 Orig.-Nr. / réf. origine / orig.-part-no.
1,850
Gewicht / poids / weight
Orsi
Hammerschlegel marteau broyeur pruning hammer
Ø11
R=
43
1
52
8
105
Ø14x29
63-M-37-14
Hammerschlegel marteau broyeur pruning hammer
Ø11,5
40
63-RM-10-20
2
Orsi
Orsi
63-AGM-506
®
63-AGM-21
Buchse entretoise / bush
Y-Messer couteau-Y / Y-blade
40 14,5
35
Ø20 Ø14,5
Ø14,5
00
17
80
5
85
25
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
0,730
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
0,055
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! 12.12 La référence d´origine présentée ci-dessus ne sert qu´à la coordination! The original part-numbers are only indicated for comparison!
0,120
Gruppe 3 Seite 137 groupe/section 3 page 137
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
Orsi
Orsi
R=1
Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding
Orsi
63-ORS-12
Hammerschlegel und Schlegelmesser
Marteaux broyeurs et couteaux pour débroussailleuses Pruning hammers and flail mover blades
Orsi 1
Ø16,5
110 41
M16x1,5
60
100
2 41
M16x1,5
63-ORS-01
0,520
2
Schraube mit Sicherungsmutter-10.9 boulon avec écrou à freinage interne-10.9 bolt with self-locking nut - 10.9
63-BUL-41
0,220
3
Schraube mit Sicherungsmutter-10.9 boulon avec écrou à freinage interne-10.9 bolt with self-locking nut-10.9
63-BUL-56
0,230
Palladino
63-ZZZ-13
63-ZZZ-39
Y-Messer couteau-Y / Y-blade
40
49
Gewicht poids weight
Y-Messer couteau-Y / Y-blade
Schäkel manille / shackle
Schlegel fléau flail
Ø18,5
Ø14x35
10
8
57
22
100
Ø16
27
Ø13
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
0,195
Palladino 63-PAL-09
Winkelmesser couteau équerre L-blade 50
50
Orig.-Nr. / réf. origine / orig.-part-no.
0,280
Gewicht / poids / weight
Palladino 63-M-1
®
Orig.-Nr. / réf. origine / orig.-part-no.
Hammerschlegel marteau broyeur pruning hammer
70 10
0,250
Gewicht / poids / weight
63-RM-3
Hammerschlegel marteau broyeur pruning hammer
Ø18,5
27
Palladino
70
16,5
16,5
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
0,510
155
170
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
2,000
R=
R=
73
85
88
105
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
63-YYY-73
Orig.-Nr. réf. origine orig.-part-no.
1
Palladino
Orsi
Best. Nr.: réf. article part-no.
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! Gruppe 3 Seite 138 La référence d´origine présentée ci-dessus ne sert qu´à la coordination!
groupe/section 3 page 138
The original part-numbers are only indicated for comparison!
1,500
Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved
3
140
8
86
60
12.12
Hammerschlegel und Schlegelmesser
Marteaux broyeurs et couteaux pour débroussailleuses Pruning hammers and flail mover blades
Palladino
63-OMA-05
63-PAL-06
40
60
Ø12,5
10
43
1,330
Gewicht / poids / weight
Palladino
57
Orig.-Nr. / réf. origine / orig.-part-no.
0,160
Gewicht / poids / weight
Palladino
63-IND-09
Y-Messer couteau-Y / Y-blade
63-NOB-04 Gerades-Messer couteau droit straight blade
Y-Messer couteau-Y / Y-blade 40
Ø25,5
60
Ø16,5
Ø25,5
10
R
30
100
10
204
8
0,920
Gewicht / poids / weight
Palladino
63-PEG-35
Orig.-Nr. / réf. origine / orig.-part-no.
204
Orig.-Nr. / réf. origine / orig.-part-no.
60
Ø25,5
100
190
5
100
53
50
Orig.-Nr. / réf. origine / orig.-part-no.
0,720
Gewicht / poids / weight
Palladino
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
0,320
63-PEG-36
Winkelmesser couteau équerre L-blade
Y-Messer couteau-Y / Y-blade 40
50
Ø17,5
Gerades-Messer couteau droit straight blade 60 Ø25,5
Ø16,5 10
205
8
10
73
29
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
0,850
Gewicht / poids / weight
Palladino
63-ZZZ-38
®
Orig.-Nr. / réf. origine / orig.-part-no.
105
63-ZZZ-37
39
Palladino
105
Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding
8
Y-Messer couteau-Y / Y-blade
204
44
75
63-NOB-05
Y-Messer couteau-Y / Y-blade
26
Schlegel fléau flail
Palladino
0,280
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
0,580
75
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! 12.12 La référence d´origine présentée ci-dessus ne sert qu´à la coordination! The original part-numbers are only indicated for comparison!
0,700
Gruppe 3 Seite 139 groupe/section 3 page 139
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
Palladino
Hammerschlegel und Schlegelmesser
Marteaux broyeurs et couteaux pour débroussailleuses Pruning hammers and flail mover blades
Palladino
Palladino
63-RM-95
Palladino
63-RM-97
Hammerschlegel marteau broyeur / pruning hammer
63-PAL-17
Hammerschlegel marteau broyeur / pruning hammer
Y-Messer couteau-Y / Y-blade 40
Ø16,5
12
R 30
74
150
Orig.-Nr. / réf. origine / orig.-part-no.
1,580
Gewicht / poids / weight
Orig.-Nr. / réf. origine / orig.-part-no.
Pegoraro
63-PEG-35
63-OMA-05 Schlegel fléau flail 75
Y-Messer couteau-Y / Y-blade Ø16,5 10 100
8
R
30
204
8
44
26
40
Ø25,5
0,330
Gewicht / poids / weight
Pegoraro
63-IND-09
Y-Messer couteau-Y / Y-blade
60
0,390
Gewicht / poids / weight
39
Orig.-Nr. / réf. origine / orig.-part-no.
50
Orig.-Nr. / réf. origine / orig.-part-no.
009119
0,720
Gewicht / poids / weight
Pegoraro 63-RM-3
Hammerschlegel marteau broyeur pruning hammer
53
100
39
Orig.-Nr. / réf. origine / orig.-part-no.
0,320
Gewicht / poids / weight
Pegoraro
1,330
Gewicht / poids / weight
Perfect
63-PEG-36
®
Orig.-Nr. / réf. origine / orig.-part-no.
63-RM-7-16
Gerades-Messer couteau droit straight blade 60
Hammerschlegel marteau broyeur / pruning hammer Ø25,5
70
85
R= 10 5
205
16,5
155
75
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
16,5
22
8
R=
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
Pegoraro
53
190
R= 90
78 R=
105
10
16,5
1,500
108
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
0,700
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! Gruppe 3 Seite 140 La référence d´origine présentée ci-dessus ne sert qu´à la coordination!
groupe/section 3 page 140
The original part-numbers are only indicated for comparison!
0,780
Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved
45
69
12.12
Hammerschlegel und Schlegelmesser
Marteaux broyeurs et couteaux pour débroussailleuses Pruning hammers and flail mover blades
Perfect
Perfect
63-IND-70
7
61
Ø20,5
41 =1
R
3
00
8
7
195
4 5
Orig.-Nr. réf. origine orig.-part-no.
Gewicht poids weight
Perfect
63-RM-16
3.11624
2,125
Winkelmesser couteau équerre / L-blade 61
1
Hammerschlegel marteau broyeur / pruning hammer
2
Sicherungsring bague de sécurité / safety ring
63-PER-62
3.03025
0,003
3
Stützscheibe rondelle / washer
63-PER-63
3.03025
0,016
4
Spannbuchse entretoise de serrage / clamping bush
63-PER-64
3.03030
0,030
5
Spannbuchse entretoise de serrage / clamping bush
63-PER-65
3.02991
0,020
6
Schraube mit Sicherungsmutter-10.9 boulon avec écrou à freinage interne-10.9 bolt with self-locking nut-10.9
63-IND-71
Ø20,5
122
Best. Nr.: réf. article part-no.
5
Ø21
Ø27
0,480
Gewicht / poids / weight
140 55
Orig.-Nr. / réf. origine / orig.-part-no.
8
56
Schraube
63-20140
3.11668
Orig.-Nr. / réf. origine / orig.-part-no.
0,440
Mutter
3.00212
Gewicht / poids / weight
0,490
Perfect ® 22
1
3 60
20,5
R= 105
16
M12x1,25
108
Ø20
23
2
1
Hammerschlegel marteau broyeur / pruning hammer
2
Buchse entretoise / bush
3
Schraube mit Sicherungsmutter-10.9 boulon avec écrou à freinage interne-10.9 bolt with self-locking nut-10.9
Orig.-Nr. réf. origine orig.-part-no.
Gewicht poids weight
63-RM-7
13665
0,800
63-PER-61
13701
0,035
Best. Nr.: réf. article part-no.
Schraube
63-PER-91
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! 12.12 La référence d´origine présentée ci-dessus ne sert qu´à la coordination! The original part-numbers are only indicated for comparison!
3165
Mutter
0,083
3134
Gruppe 3 Seite 141 groupe/section 3 page 141
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
15
Ø27
6 M20x2,5
5
Ø21
19,5
Ø12,5
Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding
20,5
120
74
Bogenmesser couteau coudé / arched blade
2
Ø20,5
Ø35,5
1
Hammerschlegel und Schlegelmesser
Marteaux broyeurs et couteaux pour débroussailleuses Pruning hammers and flail mover blades
Perfect Ø26,9 Ø21
Best. Nr.: réf. article part-no.
R=
110
20,5
110
1
Hammerschlegel marteau broyeur / pruning hammer
2
Spannbuchse entretoise de serrage / clamping bush
3
Schraube mit Sicherungsmutter-10.9 boulon avec écrou à freinage interne-10.9 bolt with self-locking nut-10.9
63-RM-82
Orig.-Nr. réf. origine orig.-part-no.
Gewicht poids weight
13665
0,985
63-PER-66
0,035
63-2091
0,330
Abb. rechte Ausführung fig. modèle droit ill. right model
Ø12,5
2
M12x1,75
195
8
1
30
50
75
M12x1,75
3
Orig.-Nr. Gewicht réf. origine poids orig.-part-no. weight
Best. Nr.: réf. article part-no.
63-IND-60-R re/dr/ri
1 2
Schraube - 10.9 boulon - 10.9 / bolt - 10.9
63-PER-93
0,038
3
Mutter - 10.9 écrou - 10.9 / bolt - 10.9
63-PER-94
0,017
Perfect Ø12,5
li/ga/le
Abb. rechte Ausführung fig. modèle droit ill. right model
®
8
235
M12x1,75
1
2 30
75
0,900
63-IND-60-L
Schlegel fléau / flail
50
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
Perfect
Best. Nr.: réf. article part-no.
M12x1,75
3 Orig.-Nr. Gewicht réf. origine poids orig.-part-no. weight
63-IND-61-R re/dr/ri
63-IND-61-L
1,000
1
Schlegel fléau / flail
2
Schraube - 10.9 boulon - 10.9 / bolt - 10.9
63-PER-93
0,038
3
Mutter - 10.9 écrou - 10.9 / bolt - 10.9
63-PER-94
0,017
li/ga/le
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! Gruppe 3 Seite 142 La référence d´origine présentée ci-dessus ne sert qu´à la coordination!
groupe/section 3 page 142
The original part-numbers are only indicated for comparison!
Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved
M20x2,5
53
22
90
1
2 19,8
3
12.12
Hammerschlegel und Schlegelmesser
Marteaux broyeurs et couteaux pour débroussailleuses Pruning hammers and flail mover blades
Perugini
Perugini
63-NOB-36
60
Y-Messer couteau-Y / Y-blade
60
Ø25,5
Ø25,5
8
10
CK4600
0,590
Gewicht / poids / weight
Perugini
57
Orig.-Nr. / réf. origine / orig.-part-no.
0,520
Gewicht / poids / weight
Peruzzo
63-RM-4
Hammerschlegel marteau broyeur / pruning hammer
50
Hammerschlegel marteau broyeur / pruning hammer
85
85
Orig.-Nr. / réf. origine / orig.-part-no.
1,350
Gewicht / poids / weight
Peruzzo
63-PRZ-01
16,5
R= 95
R= 110
63-RM-803
50
26,5
16,5
120
Orig.-Nr. / réf. origine / orig.-part-no.
0,880
Gewicht / poids / weight
Peruzzo
Y-Messer couteau-Y / Y-blade
60
Orig.-Nr. / réf. origine / orig.-part-no.
1,035
Gewicht / poids / weight
Peruzzo
63-ZZZ-27
®
0,920
R= 95
40
CK4500
Gewicht / poids / weight
Peruzzo
63-RM-802
Hammerschlegel marteau broyeur pruning hammer
Orig.-Nr. / réf. origine / orig.-part-no.
63-RM-77 Hammerschlegel marteau broyeur / pruning hammer
Y-Messer couteau-Y / Y-blade Ø26
30
16,5
40
Ø14x29
R=
98
210
8
103
4
25
65
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
0,090
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
0,780
95
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! 12.12 La référence d´origine présentée ci-dessus ne sert qu´à la coordination! The original part-numbers are only indicated for comparison!
1,150
Gruppe 3 Seite 143 groupe/section 3 page 143
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
Orig.-Nr. / réf. origine / orig.-part-no.
59
73
34
145
8
204
195
Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding
63-NOB-05
Y-Messer couteau-Y / Y-blade
Ø26
Schlegel fléau flail
Perugini
63-FEI-04
Hammerschlegel und Schlegelmesser
Marteaux broyeurs et couteaux pour débroussailleuses Pruning hammers and flail mover blades
Peruzzo
63-PER-01
Y-Messer couteau-Y / Y-blade 60
Ø25,5
Ø13x27
16,5
190
102
8
84
28
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
Hammerschlegel marteau broyeur pruning hammer 40
Y-Messer couteau-Y / Y-blade
30
4
63-M-37-16
0,080
85
Orig.-Nr. / réf. origine / orig.-part-no.
0,820
Gewicht / poids / weight
0,650
Gewicht / poids / weight
Pircher
63-AED-06-R
63-AED-08
Gedrehtes Messer couteau torsadé / twisted blade
Y-Messer couteau-Y / Y-blade 40
8
10
Ø18
135
50 50
Ø16,5
80
53
600
Orig.-Nr. / réf. origine / orig.-part-no.
Orig.-Nr. / réf. origine / orig.-part-no.
3,450
Pircher
Procomas ®
Winkelmesser couteau équerre / L-blade 40
Procomas
63-PRO-02
Y-Messer couteau-Y / Y-blade
Y-Messer couteau-Y / Y-blade 40
Ø16,5 10
63-SIC-02
60
Ø16 6
Ø25,5
8
125
63-AED-10
0,430
Gewicht / poids / weight
204
Gewicht / poids / weight
112
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
Pircher
Orig.-Nr. / réf. origine / orig.-part-no.
50
68
55
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
0,440
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
0,230
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! Gruppe 3 Seite 144 La référence d´origine présentée ci-dessus ne sert qu´à la coordination!
groupe/section 3 page 144
The original part-numbers are only indicated for comparison!
0,760
Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved
63-ISE-98
Peruzzo
R =1 00
Peruzzo
12.12
Hammerschlegel und Schlegelmesser
Marteaux broyeurs et couteaux pour débroussailleuses Pruning hammers and flail mover blades
Procomas 63-PRO-03
63-PRO-06
Gerades-Messer couteau droit straight blade
80
Ø30
Ø14x30
80
Ø30 13
330
13
80
5
42
Orig.-Nr. / réf. origine / orig.-part-no.
0,100
Gewicht / poids / weight
Orig.-Nr. / réf. origine / orig.-part-no.
2,590
Gewicht / poids / weight
2,230
Gewicht / poids / weight
Procomas 63-FEI-04
Ø25 Ø17
1
2
Y-Messer couteau-Y / Y-blade
Ø25,5
60
13
60
Orig.-Nr. / réf. origine / orig.-part-no.
Ø25,5
140
6
58
Best. Nr.: réf. article part-no.
Orig.-Nr. réf. origine orig.-part-no.
Gewicht poids weight
1
Y-Messer couteau-Y / Y-blade
63-PRO-01
0,400
2
Buchse entretoise bush
63-PRO-07
0,030
Hammerschlegel marteau broyeur pruning hammer 40
73
59
Orig.-Nr. / réf. origine / orig.-part-no.
0,520
Gewicht / poids / weight
Procomas 63-M-37-16
145
8
Procomas
Procomas
Hammerschlegel marteau broyeur pruning hammer
Hammerschlegel marteau broyeur pruning hammer
63-RM-4
®
16,5
63-RM-14
57,5
40
25,5
16,5
R= 110
00 85
120
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
70 R=
0,650
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
50
64
1,350
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! 12.12 La référence d´origine présentée ci-dessus ne sert qu´à la coordination! The original part-numbers are only indicated for comparison!
0,600
Gruppe 3 Seite 145 groupe/section 3 page 145
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
Procomas
R=1
Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding
63-PRO-04
Gerades-Messer couteau droit straight blade
Y-Messer couteau-Y / Y-blade 30
Procomas
300
Procomas
Hammerschlegel und Schlegelmesser
Marteaux broyeurs et couteaux pour débroussailleuses Pruning hammers and flail mover blades
Quivogne
40
48 23
Schlegel fléau / flail
2
0,320
Schäkel manille / shackle
63-TUR-72 9280.2006
0,230
3
Buchse entretoise bush
63-TUR-81 9217.1621 0,040
4
Schraube mit Sicherungsmutter-12.9 boulon avec écrou à freinage interne-12.9 bolt with self-locking nut-12.9
63-TUR-91 9100.1407 0,150
73
Ø13
Quivogne
Quivogne
Quivogne
63-NOB-04
63-NOB-05
63-QVG-02
Gerades-Messer couteau droit straight blade
Mittelschlegel fléau central / central flail
Y-Messer couteau-Y / Y-blade Ø25,5 10
204
204
130
28
40
60
Ø25,5
10
Gewicht poids weight
63-VOT-55 9572.2012
14,5
2
20
1
Orig.-Nr. réf. origine orig.-part-no.
Best. Nr.: réf. article part-no.
90
95
Ø16 M14x2
1
60
4
6 30 57
Orig.-Nr. / réf. origine / orig.-part-no.
1085/94
0,850
Gewicht / poids / weight
Quivogne
Orig.-Nr. / réf. origine / orig.-part-no.
0,260
Gewicht / poids / weight
Quivogne
63-RM-4-25 Hammerschlegel marteau broyeur / pruning hammer
Y-Messer couteau-Y / Y-blade
200
10
Ø25,5
40
10
57
50
25,5
110
60
R=
Winkelmesser couteau équerre L-blade 60 Ø25,5
0,920
Quivogne
63-QVG-01
®
1052/91
Gewicht / poids / weight
125
63-NOB-06
Orig.-Nr. / réf. origine / orig.-part-no.
120
Orig.-Nr. / réf. origine / orig.-part-no.
1321/94
Gewicht / poids / weight
1,020
Orig.-Nr. / réf. origine / orig.-part-no.
3124/94
Gewicht / poids / weight
0,560
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! Gruppe 3 Seite 146 La référence d´origine présentée ci-dessus ne sert qu´à la coordination!
groupe/section 3 page 146
The original part-numbers are only indicated for comparison!
1,290
Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved
21
12
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
3
Ø24
Ø16x35
Typ / modèle / type „FAC1600“
12.12
Hammerschlegel und Schlegelmesser
Marteaux broyeurs et couteaux pour débroussailleuses Pruning hammers and flail mover blades
Quivogne
63-QVG-03
63-PEG-35
63-ZAP-12
Y-Messer couteau-Y / Y-blade
44
26
60
35
Ø25,5
Ø10,5
8
195
8
Y-Messer couteau-Y / Y-blade
100
204
Schlegel fléau flail 75
Orig.-Nr. / réf. origine / orig.-part-no.
1,430
Gewicht / poids / weight
Orig.-Nr. / réf. origine / orig.-part-no.
0,720
Gewicht / poids / weight
4
42
50
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
0,110
Ø8,5
2
1
Ø8 23,5
Ø2
Ø7
22
3
20
Orig.-Nr. réf. origine orig.-part-no.
Best. Nr.: réf. article part-no.
5 18,
Gewicht poids weight
1
Y-Messer mit Kettenglied und Befestigungslasche couteau-Y avec maillon de chaîne et éclisse de fixation Y-blade with chain-link and holder
63-TOR-52
0,085
2
Bolzen mit Splint piton avec goupille / bolt with split-pin
63-TOR-81
0,011
Rapid ® M14x2
6
42
1
Y-Messer couteau-Y / Y-blade
2
Schraube mit Sicherungsmutter-12.9 boulon avec écrou à freinage interne-12.9 bolt with self-locking nut-12.9
50
Ø14,5
2
34
1
105
40
Best. Nr.: réf. article part-no.
Orig.-Nr. réf. origine orig.-part-no.
Gewicht poids weight
63-ZAP-13
14000407
0,198
63-1450
JD17990
0,100
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! 12.12 La référence d´origine présentée ci-dessus ne sert qu´à la coordination! The original part-numbers are only indicated for comparison!
Gruppe 3 Seite 147 groupe/section 3 page 147
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
Rapid
105
Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding
Rapid
98
Quivogne
Hammerschlegel und Schlegelmesser
Marteaux broyeurs et couteaux pour débroussailleuses Pruning hammers and flail mover blades
Rasant
Rasant
63-SM-01
63-SM-04
Y-Messer couteau-Y / Y-blade
Gerades-Messer couteau droit / straight blade
Ø14x30
40 82
5
81
5
Ø14x30
42
Orig.-Nr. / réf. origine / orig.-part-no.
Orig.-Nr. / réf. origine / orig.-part-no.
0,140
Gewicht / poids / weight
0,120
Gewicht / poids / weight
40 Ø13x27
1
7/16”
3
17
82
100
5
Best. Nr.: réf. article part-no.
31 48
52
Ø11,5
2
Ø11
Orig.-Nr. réf. origine orig.-part-no.
Gewicht poids weight
1
Y-Messer couteau-Y / Y-blade
63-MUL-53
0,130
2
Schäkel manille / shackle
63-MUL-71
0,110
3
Schraube mit Sicherungsmutter-10.9 boulon avec écrou à freinage interne-10.9 bolt with self-locking nut-10.9
63-71682
0,080
Rasant ®
1
Best. Nr.: réf. article part-no.
32
3 M12x1,75
Ø10
69
10
2
38
Ø11,5x34
100
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
Rasant
60 32
Orig.-Nr. réf. origine orig.-part-no.
1
Schlegel fléau / flail
63-EPO-51
0,230
2
Schäkel manille / shackle
63-EPO-76
0,140
3
Schraube mit Sicherungsmutter-10.9 boulon avec écrou à freinage interne-10.9 bolt with self-locking nut-10.9
63-1260-1
0,080
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! Gruppe 3 Seite 148 La référence d´origine présentée ci-dessus ne sert qu´à la coordination!
groupe/section 3 page 148
Gewicht poids weight
The original part-numbers are only indicated for comparison!
Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved
40
12.12
Hammerschlegel und Schlegelmesser
Marteaux broyeurs et couteaux pour débroussailleuses Pruning hammers and flail mover blades
Rinieri
Rinieri
63-FEI-04
63-RM-4
Hammerschlegel marteau broyeur pruning hammer
Ø25,5
40
60
16,5
20,5
120
0,520
Rinieri
150
Orig.-Nr. / réf. origine / orig.-part-no.
1,350
Gewicht / poids / weight
Rinieri
63-RM-25
63-RM-11-20
Hammerschlegel marteau broyeur pruning hammer
40
Hammerschlegel marteau broyeur pruning hammer
60
16,5
1,920
Gewicht / poids / weight
Rinieri
63-RM-11-16
Hammerschlegel marteau broyeur pruning hammer
Orig.-Nr. / réf. origine / orig.-part-no.
60
1,300
Gewicht / poids / weight
Rivierre Casalis
150
Orig.-Nr. / réf. origine / orig.-part-no.
1,750
Gewicht / poids / weight
Rivierre Casalis
63-RIV-52
Gerades-Messer couteau droit straight blade 50
Y-Messer couteau-Y / Y-blade
50
250
8
Ø25,5
Ø25,5
8
8
220
Ø25,5
1,730
Gewicht / poids / weight
Rivierre Casalis
63-RIV-51
®
Orig.-Nr. / réf. origine / orig.-part-no.
200
Orig.-Nr. / réf. origine / orig.-part-no.
Gerades-Messer couteau droit 60 straight blade
R= 88
150
120
63-FEI-09
20,5
R= 88
110
16,5
50
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
0,970
Orig.-Nr. / réf. origine / orig.-part-no.
B 225016
Gewicht / poids / weight
0,660
Orig.-Nr. / réf. origine / orig.-part-no.
B 225017
Gewicht / poids / weight
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! 12.12 La référence d´origine présentée ci-dessus ne sert qu´à la coordination! The original part-numbers are only indicated for comparison!
0,540
Gruppe 3 Seite 149 groupe/section 3 page 149
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
R=
59
73
80
R= 110
145
8
R=
Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding
63-M-42-A
Hammerschlegel marteau broyeur pruning hammer
Y-Messer couteau-Y / Y-blade 60
Rinieri
Hammerschlegel und Schlegelmesser
Marteaux broyeurs et couteaux pour débroussailleuses Pruning hammers and flail mover blades
RMV Ø8,5
Ø3,5
3
105
22
5 18,
Y-Messer couteau-Y / Y-blade
63-TOR-52
0,085
2
Bolzen mit Splint piton avec goupille / bolt with split-pin
63-TOR-81
0,011
3
Bolzen mit Stift piton avec goupille / bolt with pin
63-TOR-82
0,010
Rotoram
63-RM-16
63-RM-3
Hammerschlegel marteau broyeur pruning hammer
Hammerschlegel marteau broyeur pruning hammer
74 20,5
70
16,5
85
00
195
R=
=1
R
155
Orig.-Nr. / réf. origine / orig.-part-no.
W 11624
Gewicht / poids / weight
2,125
Rotoram
1,500
Gewicht / poids / weight
Rotoram 63-RM-18
®
63-M-1
Hammerschlegel marteau broyeur pruning hammer
Hammerschlegel marteau broyeur pruning hammer
70
185
2,000
16,5
104 180
Orig.-Nr. / réf. origine / orig.-part-no.
70
16,5
16,5
88
70
Gewicht / poids / weight
Rotoram
R=
Hammerschlegel marteau broyeur pruning hammer
Orig.-Nr. / réf. origine / orig.-part-no.
R=
63-RM-5-16
Gewicht poids weight
1
R= 88
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
Rosatella
Orig.-Nr. réf. origine orig.-part-no.
Best. Nr.: réf. article part-no.
170
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
2,350
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! Gruppe 3 Seite 150 La référence d´origine présentée ci-dessus ne sert qu´à la coordination!
groupe/section 3 page 150
The original part-numbers are only indicated for comparison!
2,000
Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved
26
Ø7
20
Ø8
23,5
Ø2
1
3
Ø8
18
2
12.12
Hammerschlegel und Schlegelmesser
Marteaux broyeurs et couteaux pour débroussailleuses Pruning hammers and flail mover blades
Rousseau 4
2
8
7,5
11
Ø12
M8x1,25
Ø8,5
23 35
1
Typ / modèle / type „Herminette“
3
40 47
8 34
Orig.-Nr. réf. origine orig.-part-no.
Gewicht poids weight
1
Hammerschlegel marteau broyeur / pruning hammer
63-ROU-55
5.254.33
0,080
2
Buchse entretoise / bush
63-ROU-64
5.200.69
0,005
3
Schäkel manille / shackle
63-ROU-73 4.5502.07
0,058
4
Schraube mit Sicherungsmutter-8.8 boulon avec écrou à freinage interne-8.8 bolt with self-locking nut-8.8
8
41,5
26 Ø8,5
Schraube
4.9501.64
63-835
Mutter
0,018
4.2009.28
1
45
48
100
8
60
Ø15,5
Ø16x38
2
Ø13 40
50
Best. Nr.: réf. article part-no.
1
Y-Messer couteau-Y / Y-blade
63-UNI-05
2
Schäkel manille shackle
63-UNI-07
Orig.-Nr. réf. origine orig.-part-no.
Gewicht poids weight
JTR 015
0,190 0,200
Rousseau
Rousseau 1®
48
63-MAL-15
2
Y-Messer couteau-Y / Y-blade
Ø15,5
Ø16x41 8
40
60
40
Ø14,5
Ø13
Best. Nr.: réf. article part-no.
1
Y-Messer couteau-Y / Y-blade
63-UNI-06
2
Schäkel manille shackle
63-UNI-07
Orig.-Nr. réf. origine orig.-part-no.
Gewicht poids weight
5.254.43
0,210 0,200
5
138
41
40
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! 12.12 La référence d´origine présentée ci-dessus ne sert qu´à la coordination! The original part-numbers are only indicated for comparison!
0,220
Gruppe 3 Seite 151 groupe/section 3 page 151
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
Rousseau
95
Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding
21 56,5
28
Best. Nr.: réf. article part-no.
Hammerschlegel und Schlegelmesser
Marteaux broyeurs et couteaux pour débroussailleuses Pruning hammers and flail mover blades
Rousseau
Rousseau
63-16115-1
2 25,5 61
für 63-RM-14 pour 63-RM-14 for 63-RM-14
Ø16
70 R=
1
63-16115
63-ROU-61
50
64
63-ROU-82
5
Ø17
35
115
6
4
Ø24
3.000.07
M16x1,5
6,5
Ø17
Orig.-Nr. réf. origine orig.-part-no.
Gewicht poids weight
63-RM-14
5.254.03 5.524.45
0,600
5.200.02
0,100
Best. Nr.: réf. article part-no.
Ø32,5
1
Hammerschlegel marteau broyeur / pruning hammer
2
Distanzbuchse entretoise d´écartement / distance bush
63-ROU-61
3
Buchse entretoise / bush
63-ROU-63
4
Distanzscheibe rondelle d´écartement / distance washer
63-ROU-82
5.750.05
0,020
5
Elastische Distanzscheibe rondelle élastique / elastic washer
63-ROU-83
4.7532.01
0,025
6
Schraube mit Sicherungsmutter - 8.8 boulon avec écrou à freinage interne - 8.8 bolt with self-locking nut - 8.8
63-16115
5.952.07
Rousseau 63-16115-2
Schrauben-Satz M16x1,5 ensemble visserie kit
für 63-RM-14 pour 63-RM-14 for 63-RM-14
0,070
63-ROU-83
Orig.-Nr. / réf. origine / orig.-part-no.
0,250
4.2006.15
63-16115
63-ROU-63
Schraube Mutter
0,395
Gewicht / poids / weight
5
Gewicht / poids / weight
0,395
Rousseau ®
3
95
25
40
47
Ø12
54
2
7/16”
Orig.-Nr. réf. origine orig.-part-no.
Gewicht poids weight
63-ROU-51
5.254.30
0,180
Best. Nr.: réf. article part-no.
1
Y-Messer couteau-Y / Y-blade
2
Schäkel manille / shackle
63-ROU-72
5.556.01
0,120
3
Buchse entretoise / bush
63-ROU-62
5.200.57
0,035
4
Schraube mit Sicherungsmutter-10.9 boulon avec écrou à freinage interne-10.9 bolt with self-locking nut-10.9
63-71684
5.952.24
26
Ø11
84
8
1
4
Ø20
Ø14x35
17
37
11
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
Orig.-Nr. / réf. origine / orig.-part-no.
Ø31,5
Ø17
25
3
63-ROU-83
Schraube Mutter
4.2006.19
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! Gruppe 3 Seite 152 La référence d´origine présentée ci-dessus ne sert qu´à la coordination!
groupe/section 3 page 152
The original part-numbers are only indicated for comparison!
0,080
Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved
Ø24
57,5
Schrauben-Satz M16x1,5 ensemble visserie kit
12.12
Hammerschlegel und Schlegelmesser
Marteaux broyeurs et couteaux pour débroussailleuses Pruning hammers and flail mover blades
Rousseau 8
48 26
2
103
1
Ø11
35
7/16”
17
Ø20
25
84
4
3
Best. Nr.: réf. article part-no.
Orig.-Nr. réf. origine orig.-part-no.
Gewicht poids weight
1
Schlegel fléau / flail
63-ROU-52
5.254.26
0,200
2
Schäkel manille / shackle
63-ROU-71
5.556.03
0,150
3
Buchse entretoise / bush
63-ROU-62
5.200.57
0,035
4
Schraube mit Sicherungsmutter-10.9 boulon avec écrou à freinage interne-10.9 bolt with self-locking nut-10.9
63-71684
5.952.24
Ø12
Schraube Mutter
0,080
4.2006.19
3
40 Ø20
40
47
11
54
2
Ø12 7/16”
Orig.-Nr. réf. origine orig.-part-no.
Gewicht poids weight
63-ROU-53
5.254.22
0,160
Best. Nr.: réf. article part-no.
1
Y-Messer couteau-Y / Y-blade
2
Schäkel manille / shackle
63-ROU-72
5.556.01
0,120
3
Buchse entretoise / bush
63-ROU-62
5.200.57
0,035
4
Schraube mit Sicherungsmutter-10.9 boulon avec écrou à freinage interne-10.9 bolt with self-locking nut-10.9
63-71684
5.952.24
26
Ø11
4 84
25
100
5
1
17
Ø14x35
Schraube Mutter
0,080
4.2006.19
Rousseau ®
9
Ø8,5
Ø9x17
1
25
24 10
8,5
42
2
4
3
Ø7
M8x1,25
Ø15
5
40 22
Best. Nr.: réf. article part-no.
Orig.-Nr. réf. origine orig.-part-no.
Gewicht poids weight
1
Schlegel fléau / flail
63-ROU-57
5.254.32
0,060
2
Schäkel manille / shackle
63-ROU-75
5.556.05
0,050
3
Buchse entretoise / bush
63-ROU-65
5.200.61
0,005
4
Schraube mit Sicherungsmutter-8.8 boulon avec écrou à freinage interne-8.8 bolt with self-locking nut-8.8
63-840
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! 12.12 La référence d´origine présentée ci-dessus ne sert qu´à la coordination! The original part-numbers are only indicated for comparison!
0,020
Gruppe 3 Seite 153 groupe/section 3 page 153
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
Rousseau
60
Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding
66
Ø14x34
11,5
Hammerschlegel und Schlegelmesser
Marteaux broyeurs et couteaux pour débroussailleuses Pruning hammers and flail mover blades
Rousseau
Rousseau
63-MUL-71
2
Ø15
1
34
50
M14x2
Schäkel manille / shackle
132
5
43
1
Y-Messer couteau-Y / Y-blade
2
Schraube mit Sicherungsmutter-12.9 boulon avec écrou à freinage interne-12.9 bolt with self-locking nut-12.9
63-ROU-54
Gewicht poids weight
5.254.02
0,210
Ø11
Schraube
5.952.08
63-1450
Orig.-Nr. / réf. origine / orig.-part-no.
0,100
Mutter
4.2006.07
Gewicht / poids / weight
0,110
Sauerburger
63-TOR-52-0
1
Y-Messer couteau-Y / Y-blade
M20x2,5
60
50
20,5
20
110
2
Ø8
R=
66
150 19
Orig.-Nr. / réf. origine / orig.-part-no.
Orig.-Nr. réf. origine orig.-part-no.
Best. Nr.: réf. article part-no.
88
3
1
Hammerschlegel marteau broyeur / pruning hammer
2
Schraube mit Sicherungsmutter-10.9 boulon avec écrou à freinage interne-10.9 bolt with self-locking nut-10.9
Gewicht poids weight
63-RM-1-20
1,450
63-20110
0,450
0,027
Gewicht / poids / weight
Sauerburger ®
Ø25,5
1
4 M16x1,5
8
Best. Nr.: réf. article part-no.
60
2 Ø25
65
3 M16x1,5
18,5
150
60
40
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
Sabo
Orig.-Nr. réf. origine orig.-part-no.
52
Best. Nr.: réf. article part-no.
Ø11,5
48
19
Ø17
Orig.-Nr. réf. origine orig.-part-no.
1
Y-Messer couteau-Y / Y-blade
63-SAU-04
0.004.10.0402
0,570
2
Buchse entretoise / bush
63-IND-07-1
0.017.10.3425
0,030
3
Schraube - 12.9 boulon - 12.9 / bolt - 12.9
51-1665
01.002.6917
0,130
4
Sicherungsmutter - 10.9 écrou à freinage interne - 10.9 self-locking nut - 10.9
51-MU16-1
01.011.6287
0,030
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! Gruppe 3 Seite 154 La référence d´origine présentée ci-dessus ne sert qu´à la coordination!
groupe/section 3 page 154
Gewicht poids weight
The original part-numbers are only indicated for comparison!
Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved
40
12.12
Hammerschlegel und Schlegelmesser
Marteaux broyeurs et couteaux pour débroussailleuses Pruning hammers and flail mover blades
Sauerburger 60
Ø28,5
3 212
90
7
40 Ø28
Ø21
2
53
M20x2,5
43
Best. Nr.: réf. article part-no.
Orig.-Nr. réf. origine orig.-part-no.
Gewicht poids weight
1
Y-Messer couteau-Y / Y-blade
63-SAU-01 0.006.00.1943 0,660
2
Buchse entretoise / bush
63-SAU-02
0,080
3
Schraube mit sicherungsmutter-8.8 boulon avec écrou à freinage interne-8.8 bolt with self-locking nut-8.8
63-2090
0,330
1
Abb. links fig. gauche ill. left
Ø42 Ø24
650
60
2
45
10 0
Ø42
110
3
M24x3 26
5
4
Best. Nr.: réf. article part-no.
66
®
Orig.-Nr. réf. origine orig.-part-no.
Gewicht poids weight
1
Messer rechts couteau droite / right blade
63-IND-502-R
00041030267
6,500
1
Messer links couteau gauche / left blade
63-IND-502-L
00041030266
6,500
2
Pressbuchse entretoise emboîté / bush inpressed
63-SAU-124
00171032117
0,330
3
Schraube M24x3 - 10.9 boulon / bolt
63-SAU-121
00221035651
0,465
4
Splint 4x50 goupille / split pin
63-SAU-123
010366556
0,005
5
Kronenmutter M24x3 écrou à créneaux dégagés hexagon castle nut
63-SAU-122
010146338
0,114
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! 12.12 La référence d´origine présentée ci-dessus ne sert qu´à la coordination! The original part-numbers are only indicated for comparison!
Gruppe 3 Seite 155 groupe/section 3 page 155
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
Sauerburger
12
Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding
1
Hammerschlegel und Schlegelmesser
Marteaux broyeurs et couteaux pour débroussailleuses Pruning hammers and flail mover blades
Sauerburger 1 Ø28,5
145
8
130
3 Best. Nr.: réf. article part-no.
55
M20x2,5
70
2 Ø28
Ø21
40
Gewicht poids weight
1
Y-Messer couteau-Y / Y-blade
63-SAU-03 70.004.10.10026
0,575
2
Buchse entretoise / bush
63-SAU-02
0,080
3
Schraube mit Sicherungsmutter-10.9 boulon avec écrou à freinage interne-10.9 bolt with self-locking nut-10.9
63-20130
0,440
Sauerburger
Sauerburger 1
69
63-SAU-07
M20x2,5
Buchse entretoise / bush
20,5
95
25
2
130
1
Hammerschlegel marteau broyeur / pruning hammer
2
Schraube mit Sicherungsmutter-10.9 boulon avec écrou à freinage interne-10.9 bolt with self-locking nut-10.9
Gewicht poids weight
63-RM-63
10024
2,000
63-SAU-120
10456
0,410
70
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
Alternativ zu 63-RM-63 für Sauerburger Alternative à 63-RM-63 pour Sauerburger ® to 63-RM-63 for Sauerburger Alternative 63-SAU-06
63-SAU-07
63-SAU-120
63-SAU-03 63-SAU-03
63-SAU-03 Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! Gruppe 3 Seite 156 La référence d´origine présentée ci-dessus ne sert qu´à la coordination!
groupe/section 3 page 156
Ø28
Orig.-Nr. réf. origine orig.-part-no.
Best. Nr.: réf. article part-no.
Ø21
25
Ø29 R=1
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
Orig.-Nr. réf. origine orig.-part-no.
The original part-numbers are only indicated for comparison!
0,160
Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved
60
12.12
Hammerschlegel und Schlegelmesser
Marteaux broyeurs et couteaux pour débroussailleuses Pruning hammers and flail mover blades
Sauerburger
Sauerburger
63-SAU-06
Sauerburger
63-RM-8
63-M-42-A
Hammerschlegel marteau broyeur pruning hammer
Buchse entretoise / bush
Hammerschlegel marteau broyeur pruning hammer
60
40 16,5
R=
80
R= 90
20,5
120 Orig.-Nr. / réf. origine / orig.-part-no.
0,320
Gewicht / poids / weight
Orig.-Nr. / réf. origine / orig.-part-no.
1,150
Gewicht / poids / weight
Saxonia
Sauerburger 63-IND-830
1,920
Gewicht / poids / weight
63-RM-5-16 Hammerschlegel marteau broyeur pruning hammer
Y-Messer couteau-Y / Y-blade
Ø28,5
Orig.-Nr. / réf. origine / orig.-part-no.
S.C.A.I.
63-IND-69
Y-Messer couteau-Y / Y-blade
60
150
60
Ø30 7
70
R= 88
33
185
48
Orig.-Nr. / réf. origine / orig.-part-no.
0.006.00.3845
Gewicht / poids / weight
0,680
Schanzlin 63-WIL-51
Hammerschlegel marteau broyeur pruning hammer
16,5
190
215
7
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
0,550
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
2,000
Schmidt
63-HUM-09
®
Gerades Messer couteau droit / straight blade
86
80
Ø28,5
10
20,5
R= 90
5 45
206
Orig.-Nr. / réf. origine / orig.-part-no.
120.34-0-4
Gewicht / poids / weight
Orig.-Nr. / réf. origine / orig.-part-no.
2,240
Gewicht / poids / weight
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! 12.12 La référence d´origine présentée ci-dessus ne sert qu´à la coordination! The original part-numbers are only indicated for comparison!
254902-0 2,690
Gruppe 3 Seite 157 groupe/section 3 page 157
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
Ø45
Ø29
Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding
45
Hammerschlegel und Schlegelmesser
Marteaux broyeurs et couteaux pour débroussailleuses Pruning hammers and flail mover blades
Schmidt 63-2035
Messerschraube mit Kronenmutter boulon pour couteau avec écrou à créneaux dégagés blade bolt with hexagon castle nut 30
Orig.-Nr. / réf. origine / orig.-part-no.
Ø5,5
Güte / qualité / quality
12.9
0,270
Gewicht / poids / weight
Schmidt
Schmidt
63-IND-32
63-IND-33
Schlegel fléau flail
Schlegel fléau flail
80
80
220
320 Ø28,5
63-2035
passend für Maschinen s´adaptant sur machines fitting for machines
63-2035
passend für Maschinen s´adaptant sur machines fitting for machines
RMB 4.2 kurz
RMB 4.2 lang
255112-5 1,290
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
Schmidt
320
255115-8 1,850
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
Schmidt - Randstreifenmesser
80
63-IND-34-R re/dr/ri ® 63-IND-34-L li/ga/le
63-IND-35 Schlegel fléau flail
0
45
63-2035 passend für Maschinen s´adaptant sur machines fitting for machines
RMB - SRM
80
10
Ø28,5
Ø28,5
10
Schlegel fléau flail
10
Ø28,5
10
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
34
39,5
36 47 57
31
21,5
28 5
passend für Maschinen s´adaptant sur machines fitting for machines
Abb. rechts fig. droit ill. right
Orig.-Nr. / réf. origine / orig.-part-no. re/dr/ri Orig.-Nr. / réf. origine / orig.-part-no. li/ga/le Gewicht / poids / weight
63-2035
139197-8 159059-5 1,830
RMB4.1 - SMR22 Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! Gruppe 3 Seite 158 La référence d´origine présentée ci-dessus ne sert qu´à la coordination!
groupe/section 3 page 158
The original part-numbers are only indicated for comparison!
2,680
Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved
Ø28
M20x1,5
10
12.12
Hammerschlegel und Schlegelmesser
Marteaux broyeurs et couteaux pour débroussailleuses Pruning hammers and flail mover blades
Schmidt 48 26
8
1
11,5
66
Ø15x33 100
Ø11
82
4 35
20
7/16”
Ø20
3
Orig.-Nr. réf. origine orig.-part-no.
Best. Nr.: réf. article part-no.
Gewicht poids weight
1
Schlegel fléau / flail
63-SCH-51
0,200
2
Schäkel manille / shackle
63-ROU-71
0,150
3
Aluminium buchse entretoise en aluminium / aluminium bush
63-MUL-63
0,006
4
Schraube mit Sicherungsmutter-10.9 boulon avec écrou à freinage interne-10.9 bolt with self-locking nut-10.9
63-71682
0,080
Ø12
25
Schmidt
8
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
63-SCH-98
155
Ø6
Ø8,5
Ø25
115
24
Ø24,7
35
Ø 24
Ø24,7
90
Abscherbolzen piton de sûreté à cisaillement shear pin
274601-4 0,580
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
Schmidt
63-SCH-62
Schots
63-WIL-51
®
Hammerschlegel marteau broyeur pruning hammer
Buchse entretoise / bush
Ø24
39 86
20,5
30 R= 90
Ø16,5
Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding
2
206
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
0,090
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
2,240
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! 12.12 La référence d´origine présentée ci-dessus ne sert qu´à la coordination! The original part-numbers are only indicated for comparison!
Gruppe 3 Seite 159 groupe/section 3 page 159
Hammerschlegel und Schlegelmesser
Marteaux broyeurs et couteaux pour débroussailleuses Pruning hammers and flail mover blades
Schulte
Schulte
63-IND-205
Ø38 7 15
Ø60
Orig.-Nr. / réf. origine / orig.-part-no.
H401-040
Gewicht / poids / weight
251-014
Güte / qualité / quality
5,920
Gewicht / poids / weight
10.9 0,800
Schulte
715
780
Bolzen für die Montage mit 1 Messer piton pour montage avec 1 couteau M27x2 pin for assembling with 1 blade Ø28 Ø38
Abb. links fig. gauche ill. left
Ø60
Orig.-Nr. / réf. origine / orig.-part-no. re/dr/ri
H401-059 Orig.-Nr. / réf. origine / orig.-part-no. li/ga/le
H401-058
Gewicht / poids / weight
78 92
Messer couteau blade
63-SCH-93
37
10 0
Ø38,5
64
63-IND-204R re/dr/ri 63-IND-204L li/ga/le
12
Schulte
7,110
Orig.-Nr. / réf. origine / orig.-part-no.
251-007
Güte / qualité / quality
Gewicht / poids / weight
10.9 0,720
Schulte
63-IND-247R re/dr/ri ® 63-IND-247L li/ga/le
Ø38,5
100
12
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
Orig.-Nr. / réf. origine / orig.-part-no.
Messer couteau blade
565 635
Abb. links fig. gauche ill. left
Orig.-Nr. / réf. origine / orig.-part-no. re/dr/ri Orig.-Nr. / réf. origine / orig.-part-no. li/ga/le Gewicht / poids / weight
Mutter und Buchse siehe nächste Seite! écrou et entretoise veuillez voir la page suivante! nut and bush please tum to the next page!
H401-027 H401-026 5,650
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! Gruppe 3 Seite 160 La référence d´origine présentée ci-dessus ne sert qu´à la coordination!
groupe/section 3 page 160
The original part-numbers are only indicated for comparison!
Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved
90 102
78 0
39
Ø38,5
Bolzen für die Montage mit 2 Messern piton pour montage avec 2 couteaux M27x2 pin for assembling with 2 blades Ø28
66
100
Gerades Messer couteau droit / straight blade
10
63-SCH-92
12.12
Hammerschlegel und Schlegelmesser
Marteaux broyeurs et couteaux pour débroussailleuses Pruning hammers and flail mover blades
Schulte
Gerades Messer couteau droit / straight blade
565
635
passende Bolzen siehe vorherige Seite! pitons veuillez voir la page précédente! pins please see the page before!
H401-033 4,600
Schulte
63-IND-245R re/dr/ri 63-IND-245L li/ga/le
1 00
Ø38,5
Schulte
63-SCH-94 Mutter écrou nut
Messer couteau blade
M27x2
642
710
Abb. links fig. gauche ill. left
Gewicht / poids / weight
Schulte
63-IND-244
Orig.-Nr. / réf. origine / orig.-part-no.
H401-052 H401-048 6,910
Orig.-Nr. / réf. origine / orig.-part-no. re/dr/ri Orig.-Nr. / réf. origine / orig.-part-no. li/ga/le
®
Ø38,5
Gerades Messer couteau droit / straight blade
100
257-003
Güte / qualité / quality
Gewicht / poids / weight
Schulte
63-SCH-91 Buchse entretoise bush Ø50,7
710
Durchgehender-Nut encoche continue continuously groove
Ø28,5
37
642
8.8 0,100
Ø44,5
Orig.-Nr. / réf. origine / orig.-part-no. Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
H401-034 5,250
618-001
Gewicht / poids / weight
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! 12.12 La référence d´origine présentée ci-dessus ne sert qu´à la coordination! The original part-numbers are only indicated for comparison!
0,280
Gruppe 3 Seite 161 groupe/section 3 page 161
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
Gewicht / poids / weight
12
Orig.-Nr. / réf. origine / orig.-part-no.
10
Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding
100
Ø38,5
10
63-IND-246
Hammerschlegel und Schlegelmesser
Marteaux broyeurs et couteaux pour débroussailleuses Pruning hammers and flail mover blades
Seko
Seko
63-SEK-02
Hammerschlegel marteau broyeur pruning hammer
63-SEK-03
60
70
Ø25,5
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
Seppi
Orig.-Nr. / réf. origine / orig.-part-no.
333 003
Gewicht / poids / weight
0,680
Seppi
63-SEP-51
333 005
Gewicht / poids / weight
Hammerschlegel marteau broyeur pruning hammer
78
35,5
80 R=
77
110 R=
70
75
Orig.-Nr. / réf. origine / orig.-part-no.
1,630
Gewicht / poids / weight
Seppi
85
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
2,140
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
63-RM-102 Hammerschlegel marteau broyeur pruning hammer
26
60
38
0
8 R=
63
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
13
0 10 R=
70
1,400
70
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
0,420
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! Gruppe 3 Seite 162 La référence d´origine présentée ci-dessus ne sert qu´à la coordination!
groupe/section 3 page 162
35,5
110 R=
Seppi ®
0,610
63-SEP-53
Hammerschlegel marteau broyeur pruning hammer
31
Orig.-Nr. / réf. origine / orig.-part-no.
Seppi
63-SEP-52
Hammerschlegel marteau broyeur pruning hammer
Hammerschlegel marteau broyeur pruning hammer
7
210
R= 88
2,000
58
Ø25,5
46
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
60
7
20,5
185
63-SEP-54
Gerades-Messer couteau droit straight blade
Y-Messer couteau-Y / Y-blade
The original part-numbers are only indicated for comparison!
3,400
Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved
63-RM-5-20
205
Seko
12.12
Hammerschlegel und Schlegelmesser
Marteaux broyeurs et couteaux pour débroussailleuses Pruning hammers and flail mover blades
Seppi
Seppi
63-SEP-55
63-SEP-56
Hammerschlegel marteau broyeur pruning hammer
63-SPI-03
Hammerschlegel marteau broyeur / pruning hammer
60
35
78
31
Y-Messer couteau-Y / Y-blade 60
Ø25,5
80 R=
R
70
78
0
1,690
56
100
78
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
1 =1
182
8
Orig.-Nr. / réf. origine / orig.-part-no.
19002002
2,700
Gewicht / poids / weight
0,680
Gewicht / poids / weight
Seppi 1
200
M16x2
40
3
63-RM-99 Hammerschlegel marteau broyeur / pruning hammer
48
16,5
58
110
31
2
120 26,5 M16x1,5
16,5
70
90
0
Orig.-Nr. / réf. origine / orig.-part-no.
R =9
4
40
0
8 R=
22
Gewicht / poids / weight
120
M16x1,5
24
1,730
15,5
5
®
Best. Nr.: réf. article part-no.
1
Hammerschlegel marteau broyeur / pruning hammer
63-RM-25
2
Hammerschlegel marteau broyeur / pruning hammer
63-RM-26
Orig.-Nr. réf. origine orig.-part-no.
Gewicht poids weight
1,300 119533
1,100
entweder / soit / either 3
Schraube mit Sicherungsmutter - 8.8 boulon avec écrou à freinage interne - 8.8 bolt with self-locking nut - 8.8
63-16200
0,360
Schraube - 10.9 boulon - 10.9 / bolt - 10.9
63-SEP-91
0,180
Mutter écrou / nut
63-SEP-92
0,028
oder / soit / or
4 5
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! 12.12 La référence d´origine présentée ci-dessus ne sert qu´à la coordination! The original part-numbers are only indicated for comparison!
Gruppe 3 Seite 163 groupe/section 3 page 163
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
Seppi
Orig.-Nr. / réf. origine / orig.-part-no.
R=
Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding
Seppi
Hammerschlegel und Schlegelmesser
Marteaux broyeurs et couteaux pour débroussailleuses Pruning hammers and flail mover blades
Seppi
63-SPI-04
Seppi
63-HOW-48
Y-Messer couteau-Y / Y-blade
63-SPI-06
Y-Messer couteau-Y / Y-blade
80
Ø20x34,5
Ø25,5 10
85
6
2 14 0 4 2
60
37
Orig.-Nr. / réf. origine / orig.-part-no.
0,150
Gewicht / poids / weight
Orig.-Nr. / réf. origine / orig.-part-no.
0,440
Gewicht / poids / weight
Sicma
Sicma
63-RM-10-20
Orig.-Nr. / réf. origine / orig.-part-no.
63-ORS-02
Y-Messer couteau-Y / Y-blade 60
1,120
Gewicht / poids / weight
Sicma
63-IND-99
Hammerschlegel marteau broyeur pruning hammer
Schäkel manille / shackle
Ø22,5
48
20,5
100
52
105
8
Ø12,5
55
Ø29
8
50
100
45
Ø11
R=
66
150 Orig.-Nr. / réf. origine / orig.-part-no.
1,850
Gewicht / poids / weight
Sicma
Orig.-Nr. / réf. origine / orig.-part-no.
Gewicht / poids / weight
Sicma
63-SIC-02
®
Winkelmesser couteau équerre / L-blade 60
0,480
Gewicht / poids / weight
Orig.-Nr. / réf. origine / orig.-part-no.
Y-Messer couteau-Y / Y-blade 60
Ø25,5
8
Ø25,5
8
67
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
0,580
204
63-SIC-01
120
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
Mulchmesser couteau-broyeur / comminution blade
55
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
0,750
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! Gruppe 3 Seite 164 La référence d´origine présentée ci-dessus ne sert qu´à la coordination!
groupe/section 3 page 164
The original part-numbers are only indicated for comparison!
0,125
Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved
Seppi
12.12
Hammerschlegel und Schlegelmesser
Marteaux broyeurs et couteaux pour débroussailleuses Pruning hammers and flail mover blades
Sicma
Sicma
63-SIC-03
63-SIC-04
Winkelmesser couteau équerre / L-blade
60
Ø25,5
8
195
195
Ø25,5
8
57
Sicma
0,660
Gewicht / poids / weight
Sicma
63-SIC-06
Sicma
63-SIC-10
63-SIC-11
Y-Messer couteau-Y / Y-blade
Gedrehtes-Messer couteau torsadé 50 twisted blade
Gerades Messer couteau droit straight blade 40
40
Ø14x30
8
90
195
6
Ø16,5
6
43
Orig.-Nr. / réf. origine / orig.-part-no.
0,570
Gewicht / poids / weight
Sicma
0,170
Gewicht / poids / weight
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
0,230
Sicma
63-SIC-13
®
Y-Messer couteau-Y / Y-blade
Winkelmesser couteau équerre / L-blade 50
Ø16,5 10
Ø16,5 10
68
70
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
120
63-SIC-12
50
Orig.-Nr. / réf. origine / orig.-part-no.
0,520
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
0,600
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! 12.12 La référence d´origine présentée ci-dessus ne sert qu´à la coordination! The original part-numbers are only indicated for comparison!
Gruppe 3 Seite 165 groupe/section 3 page 165
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
0,810
Gewicht / poids / weight
Orig.-Nr. / réf. origine / orig.-part-no.
136
Orig.-Nr. / réf. origine / orig.-part-no.
125
Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding
60
Gerades Messer couteau droit straight blade
Hammerschlegel und Schlegelmesser
Marteaux broyeurs et couteaux pour débroussailleuses Pruning hammers and flail mover blades
Sicma (Miglianico)
63-M-42-A
Sicma (Miglianico)
63-RM-66
Hammerschlegel marteau broyeur pruning hammer
63-RM-25
Hammerschlegel marteau broyeur pruning hammer
60
Hammerschlegel marteau broyeur pruning hammer
40
40
16,5
16,5
20,5
110
R=
R=
80
0 11 R=
Orig.-Nr. / réf. origine / orig.-part-no.
1,920
1,310
Gewicht / poids / weight
Sicma (Miglianico)
63-AGM-01
Y-Messer couteau-Y / Y-blade
Orig.-Nr. / réf. origine / orig.-part-no.
63-AGM-21
Y-Messer couteau-Y / Y-blade
Gerades Messer couteau droit straight blade 60
Ø25,5
35
Ø25,5
Ø14,5 5
150
10
25
60
Orig.-Nr. / réf. origine / orig.-part-no.
0,650
Gewicht / poids / weight
Sicma (Miglianico) 63-FEI-04
Orig.-Nr. / réf. origine / orig.-part-no.
Sicma (Miglianico)
®
60
Gewicht / poids / weight
60
Ø25,5 10
59
Orig.-Nr. / réf. origine / orig.-part-no.
0,520
Y-Messer couteau-Y / Y-blade Ø25,5
8
204
8
73
63-SIC-02
Y-Messer couteau-Y / Y-blade
Ø25,5
57
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
0,920
55
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! Gruppe 3 Seite 166 La référence d´origine présentée ci-dessus ne sert qu´à la coordination!
groupe/section 3 page 166
0,120
Gewicht / poids / weight
Sicma (Miglianico)
63-NOB-05
Y-Messer couteau-Y / Y-blade 60
0,610
Gewicht / poids / weight
Orig.-Nr. / réf. origine / orig.-part-no.
204
10
1,300
Gewicht / poids / weight
Sicma (Miglianico)
63-AGM-02
145
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
Sicma (Miglianico)
Orig.-Nr. / réf. origine / orig.-part-no.
150
Gewicht / poids / weight
60
120
118
80
150
The original part-numbers are only indicated for comparison!
0,750
Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved
Sicma (Miglianico)
12.12
Hammerschlegel und Schlegelmesser
Marteaux broyeurs et couteaux pour débroussailleuses Pruning hammers and flail mover blades
Sicma (Miglianico)
Y-Messer couteau-Y / Y-blade Ø25,5
40
Y-Messer couteau-Y / Y-blade
40
Ø20
204
8
Ø16,5 8
110
10
54
55
Orig.-Nr. / réf. origine / orig.-part-no.
50
Orig.-Nr. / réf. origine / orig.-part-no.
0,750
Gewicht / poids / weight
63-SIM-15
Y-Messer couteau-Y / Y-blade
Orig.-Nr. / réf. origine / orig.-part-no.
0,350
Gewicht / poids / weight
63-M-37-16
Sicma (Miglianico)
63-SIM-22
Hammerschlegel marteau broyeur pruning hammer 40
63-RM-77
Hammerschlegel marteau broyeur pruning hammer
Y-Messer couteau-Y / Y-blade 60
16,5
Ø26
16,5
40
R=1
R=
00
98
145
8
85
0,270
Gewicht / poids / weight
Sicma (Miglianico)
Sicma (Miglianico)
60
95
Orig.-Nr. / réf. origine / orig.-part-no.
Orig.-Nr. / réf. origine / orig.-part-no.
0,650
Gewicht / poids / weight
Gewicht / poids / weight
Orig.-Nr. / réf. origine / orig.-part-no.
0,520
Gewicht / poids / weight
0,620
S.M.A. ®
3 8 95
25
26
54
2
Ø11
7/16”
Orig.-Nr. réf. origine orig.-part-no.
Gewicht poids weight
63-ROU-51
T59
0,180
Best. Nr.: réf. article part-no.
1
Y-Messer couteau-Y / Y-blade
2
Schäkel manille / shackle
63-ROU-72
SM44
0,120
3
Buchse entretoise / bush
63-ROU-62
88.63
0,035
4
Schraube mit Sicherungsmutter-10.9 boulon avec écrou à freinage interne-10.9 bolt with self-locking nut-10.9
63-71684
P413
0,080
40
47
Ø12
4 84
1
Ø20
Ø14x35
17
37
11
Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding
60
Sicma (Miglianico)
63-SIM-14
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! 12.12 La référence d´origine présentée ci-dessus ne sert qu´à la coordination! The original part-numbers are only indicated for comparison!
Gruppe 3 Seite 167 groupe/section 3 page 167
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
63-SIM-12
110
Sicma (Miglianico)
Hammerschlegel und Schlegelmesser
Marteaux broyeurs et couteaux pour débroussailleuses Pruning hammers and flail mover blades
S.M.A.
S.M.A.
63-16115-1
2 25,5 61
für 63-RM-14 pour 63-RM-14 for 63-RM-14
Ø16
70 R=
63-ROU-61
50
63-ROU-82
Ø17
Ø31,5
25
Ø17
5 Orig.-Nr. réf. origine orig.-part-no.
Gewicht poids weight
63-RM-14
1001471
0,600
Best. Nr.: réf. article part-no.
Ø32,5
1
Hammerschlegel marteau broyeur / pruning hammer
2
Distanzbuchse entretoise d´écartement / distance bush
63-ROU-61
FG24x61
0,100
3
Buchse entretoise / bush
63-ROU-63
SM61
0,070
4
Distanzscheibe rondelle d´écartement / distance washer
63-ROU-82
0,020
5
Elastische Distanzscheibe rondelle élastique / elastic washer
63-ROU-83
0,025
6
Schraube mit Sicherungsmutter - 8.8 boulon avec écrou à freinage interne - 8.8 bolt with self-locking nut - 8.8
S.M.A.
63-MAL-15
Schraube
63-16115
Mutter
0,250
102421
S.M.A.
63-16115-2 Schrauben-Satz M16x1,5 ensemble visserie kit
für 63-RM-14 pour 63-RM-14 for 63-RM-14 63-ROU-63
63-ROU-83
Orig.-Nr. / réf. origine / orig.-part-no.
Y-Messer couteau-Y / Y-blade 40
Ø16
49 22
5
Ø13
40
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
Ø14x30
57
5
0,220
42
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
0,195
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! Gruppe 3 Seite 168 La référence d´origine présentée ci-dessus ne sert qu´à la coordination!
groupe/section 3 page 168
0,395
63-SM-01
Schäkel manille / shackle
Ø14,5
63-16115
S.M.A.
63-YYY-73
®
0,395
Gewicht / poids / weight
Gewicht / poids / weight
S.M.A.
Y-Messer couteau-Y / Y-blade 40
1001490
63-ROU-83
Orig.-Nr. / réf. origine / orig.-part-no.
M16x1,5
Ø17
138
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
6,5
35
6
4
Ø24
3
115
5
64
63-16115
82
1
The original part-numbers are only indicated for comparison!
0,140
Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved
Ø24
57,5
Schrauben-Satz M16x1,5 ensemble visserie kit
12.12
Hammerschlegel und Schlegelmesser
Marteaux broyeurs et couteaux pour débroussailleuses Pruning hammers and flail mover blades
S.M.A. 8
1
48 26
2
11,5
103
3 Ø20
84
4 7/16”
17
25
Ø12
Gewicht poids weight
Ø11
63-ROU-52
88.65
0,200
1
Schlegel fléau / flail
2
Schäkel manille / shackle
63-ROU-71
88.64
0,150
3
Buchse entretoise / bush
63-ROU-62
88.63
0,035
4
Schraube mit Sicherungsmutter-10.9 boulon avec écrou à freinage interne-10.9 bolt with self-locking nut-10.9
63-71684
P413
0,080
Orig.-Nr. réf. origine orig.-part-no.
Gewicht poids weight
63-ROU-53
BG59
0,160
40
3
40
47
54
Ø11
7/16”
1 2
Schäkel manille / shackle
63-ROU-72
SM44
0,120
3
Buchse entretoise / bush
63-ROU-62
88.63
0,035
4
Schraube mit Sicherungsmutter-10.9 boulon avec écrou à freinage interne-10.9 bolt with self-locking nut-10.9
63-71684
P413
0,080
S.M.A.
S.M.A.
M14x2
5 132
1
43
1
Y-Messer couteau-Y / Y-blade
2
Schraube mit Sicherungsmutter-12.9 boulon avec écrou à freinage interne-12.9 bolt with self-locking nut-12.9
Gerades Messer couteau droit straight blade
50
Ø15
63-SM-04
2
40
Best. Nr.: réf. article part-no.
63-ROU-54
Orig.-Nr. réf. origine orig.-part-no.
Gewicht poids weight
LA UNIV
0,210
Ø14x30 5
81
®
34
40
Best. Nr.: réf. article part-no.
17
Ø12
Y-Messer couteau-Y / Y-blade
26
2
4 84
25
100
5
1
Ø20
Ø14x35
Schraube
63-1450
P416
Mutter
000920
0,100
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! 12.12 La référence d´origine présentée ci-dessus ne sert qu´à la coordination! The original part-numbers are only indicated for comparison!
0,120
Gruppe 3 Seite 169 groupe/section 3 page 169
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
S.M.A.
11
Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding
35
Orig.-Nr. réf. origine orig.-part-no.
Best. Nr.: réf. article part-no.
66
Ø14x34
Hammerschlegel und Schlegelmesser
Marteaux broyeurs et couteaux pour débroussailleuses Pruning hammers and flail mover blades
S.M.A.
S.M.A.
63-16115-1
2
Schrauben-Satz M16x1,5 ensemble visserie kit
Ø24
26 61
für 63-RM-800 pour 63-RM-800 for 63-RM-800
Ø16
75
R=
1
68
63-ROU-61
60
63-ROU-82
5
Ø17
Ø24
3
6
Ø31,5
M16x1,5 25
Ø17
Ø17
5 Best. Nr.: réf. article part-no.
Ø32,5
Orig.-Nr. réf. origine orig.-part-no.
Gewicht poids weight
1
Hammerschlegel marteau broyeur / pruning hammer
63-RM-800
SM62
0,760
2
Distanzbuchse entretoise d´écartement / distance bush
63-ROU-61
FG24x61
0,100
3
Buchse entretoise / bush
63-ROU-63
SM61
0,070
4
Distanzscheibe rondelle d´écartement / distance washer
63-ROU-82
0,020
5
Elastische Distanzscheibe rondelle élastique / elastic washer
63-ROU-83
0,025
6
Schraube mit Sicherungsmutter - 8.8 boulon avec écrou à freinage interne - 8.8 bolt with self-locking nut - 8.8
S.M.A.
63-SMA-59 Schlegel fléau flail
Schraube
63-16115
1001490 Mutter
0,250
102421
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
63-16115-2 Schrauben-Satz M16x1,5 ensemble visserie kit
für 63-RM-800 pour 63-RM-800 for 63-RM-800
Schlegel fléau flail
8
63-ROU-83
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
12
Ø16x35
Ø14,5x35
98
35
35
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
0,190
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
0,310
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! Gruppe 3 Seite 170 La référence d´origine présentée ci-dessus ne sert qu´à la coordination!
groupe/section 3 page 170
63-16115
63-ROU-63
63-SMA-73
®
0,395
S.M.A.
S.M.A.
98
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
6,5
35
63-ROU-83 115
4
63-16115
The original part-numbers are only indicated for comparison!
0,395
Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved
58
12.12
Hammerschlegel und Schlegelmesser
Marteaux broyeurs et couteaux pour débroussailleuses Pruning hammers and flail mover blades
S.M.A. 40
3
31
47
11
26
Ø11
54
2
Ø12
7/16”
Orig.-Nr. réf. origine orig.-part-no.
Gewicht poids weight
63-SMA-51
BG59 COURT
0,120
Best. Nr.: réf. article part-no.
84
84
25
1
Y-Messer couteau-Y / Y-blade
2
Schäkel manille / shackle
63-ROU-72
SM44
0,120
3
Buchse entretoise / bush
63-ROU-62
88.63
0,035
4
Schraube mit Sicherungsmutter-10.9 boulon avec écrou à freinage interne-10.9 bolt with self-locking nut-10.9
63-71684
P413
0,080
Orig.-Nr. réf. origine orig.-part-no.
Gewicht poids weight
63-SMA-52
SM56
0,200
3 22
48 23
Ø14
55
2
S.M.A.
63-BER-52
Ø12
7/16”
1
Y-Messer couteau-Y / Y-blade
2
Schäkel manille / shackle
63-SMA-71
SM46
0,200
3
Buchse entretoise / bush
63-SMA-61
SML2
0,030
4
Schraube mit Sicherungsmutter-10.9 boulon avec écrou à freinage interne-10.9 bolt with self-locking nut-10.9
63-71684
P413
0,080
S.M.A.
S.M.A.
63-SMA-54
®
63-SMA-56
Y-Messer couteau-Y / Y-blade
Y-Messer couteau-Y / Y-blade
Y-Messer couteau-Y / Y-blade 40
35
36
0,180
42
48
45
Orig.-Nr. / réf. origine / orig.-part-no.
8
98
8
97
8
Gewicht / poids / weight
Ø15x40
Ø14,5x35
Ø14,5x35
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
0,190
98
40
Best. Nr.: réf. article part-no.
84
6
17
1
4
Ø20
Ø15x34
91
50
Orig.-Nr. / réf. origine / orig.-part-no.
TX95
Gewicht / poids / weight
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! 12.12 La référence d´origine présentée ci-dessus ne sert qu´à la coordination! The original part-numbers are only indicated for comparison!
0,210
Gruppe 3 Seite 171 groupe/section 3 page 171
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
S.M.A.
11
Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding
1
4
Ø20
5
17
Ø13x26
Hammerschlegel und Schlegelmesser
Marteaux broyeurs et couteaux pour débroussailleuses Pruning hammers and flail mover blades
S.M.A.
S.M.A.
63-SMA-55
S.M.A.
63-SMA-57
Y-Messer couteau-Y / Y-blade
63-SMA-72
Y-Messer couteau-Y / Y-blade
Schäkel manille / shackle
40 49
Ø15x40
Ø16x32
14,5
23
74
58
98
8
90
8
Ø13
46
43
0,200
Gewicht / poids / weight
Gewicht / poids / weight
0,215
63-SIC-10 Y-Messer couteau-Y / Y-blade
Gerades Messer couteau droit straight blade 60
Ø25,5
195
Ø25,5 8
0,210
Gewicht / poids / weight
Sovema
63-SIC-04
Winkelmesser couteau équerre / L-blade
Orig.-Nr. / réf. origine / orig.-part-no.
40
Ø14x30 6
195
63-SIC-03
60
SM40RL
Sovema
8
43
57
Orig.-Nr. / réf. origine / orig.-part-no.
0,810
Gewicht / poids / weight
Sovema
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
0,660
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
Sovema
63-SIC-11
63-SIC-12
®
Y-Messer couteau-Y / Y-blade 40
50
Ø16,5
6
Ø16,5 10
125
Gerades Messer couteau droit straight blade
136
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
Sovema
Orig.-Nr. / réf. origine / orig.-part-no.
70
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
90
Orig.-Nr. / réf. origine / orig.-part-no.
0,230
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
0,520
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! Gruppe 3 Seite 172 La référence d´origine présentée ci-dessus ne sert qu´à la coordination!
groupe/section 3 page 172
The original part-numbers are only indicated for comparison!
0,170
Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved
40
12.12
Hammerschlegel und Schlegelmesser
Marteaux broyeurs et couteaux pour débroussailleuses Pruning hammers and flail mover blades
Sovema
17
8x45°
1 Ø16,5 10
5
Ø5 5
88
2
6,5
80
Best. Nr.: réf. article part-no.
68
72
3
Orig.-Nr. / réf. origine / orig.-part-no.
0,140
Gewicht / poids / weight
1
Winkelmesser couteau équerre / L-blade
2 3
Orig.-Nr. réf. origine orig.-part-no.
Gewicht poids weight
63-SIC-13
0,600
Bolzen / piton / bolt
63-SOV-500
0,350
Buchse entretoise / bush
63-SOV-501
0,160
1
Ø25
204
4
8
Ø35
Best. Nr.: réf. article part-no.
55
1
Y-Messer couteau-Y / Y-blade
63-SOV-51
2
Buchse entretoise bush
63-SOV-61
Orig.-Nr. réf. origine orig.-part-no.
Gewicht poids weight
900 238 065
0,760 0,040
Sovema
Sovema
63-SOV-10
63-SIC-06
®
Mulchmesser couteau-broyeur / comminution blade 60
2
Ø16,2
Ø25,5
12
60
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
Sovema
Gedrehtes-Messer 50 couteau torsadé twisted blade
Ø25,5
8
Orig.-Nr. / réf. origine / orig.-part-no.
900 241 123
Gewicht / poids / weight
195
8
200
Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding
Ø14x25
25
3
Ø45 Ø25
37,5
50
36
10x45°
19
Schlegel fléau flail
120
63-JDE-01
Ø25
Sovema
0,710
Orig.-Nr. / réf. origine / orig.-part-no.
900 238 136
Gewicht / poids / weight
0,570
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! 12.12 La référence d´origine présentée ci-dessus ne sert qu´à la coordination! The original part-numbers are only indicated for comparison!
Gruppe 3 Seite 173 groupe/section 3 page 173
Hammerschlegel und Schlegelmesser
Marteaux broyeurs et couteaux pour débroussailleuses Pruning hammers and flail mover blades
Sovema
63-ORS-02
Spearhead
63-RM-10-16
63-SPH-93
Hammerschlegel marteau broyeur pruning hammer
Schäkel manille / shackle
Schäkel manille / shackle 45 20
20
48
16,5 50
52
Ø12,5
55
Ø13,5
R=
10 0
Ø11
150 Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
0,125
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
1,770
Orig.-Nr. / réf. origine / orig.-part-no.
7770722
Gewicht / poids / weight
63-SPH-01-R re/dr/ri 63-SPH-01-L li/ga/le
10 0
Ø38
12
Messer couteau blade
600
Abb. rechts fig. droit ill. right
7770702 7770703 6,300
Orig.-Nr. / réf. origine / orig.-part-no. re/dr/ri Orig.-Nr. / réf. origine / orig.-part-no. li/ga/le Gewicht / poids / weight
Spearhead
63-SPH-02-R re/dr/ri ® 63-SPH-02-L li/ga/le
10 0
Ø38
Messer couteau blade
12
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
Spearhead
650 Abb. rechts fig. droit ill. right Orig.-Nr. / réf. origine / orig.-part-no. re/dr/ri Orig.-Nr. / réf. origine / orig.-part-no. li/ga/le Gewicht / poids / weight
7770700 7770701 6,900
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! Gruppe 3 Seite 174 La référence d´origine présentée ci-dessus ne sert qu´à la coordination!
groupe/section 3 page 174
The original part-numbers are only indicated for comparison!
0,200
Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved
Sovema
12.12
Hammerschlegel und Schlegelmesser
Spearhead
63-SPH-05R re/dr/ri 63-SPH-05L li/ga/le
Ø38,5
91 395
Abb. rechts fig. droit ill. right
7770731 7770730 4,380
Orig.-Nr. / réf. origine / orig.-part-no. re/dr/ri Orig.-Nr. / réf. origine / orig.-part-no. li/ga/le Gewicht / poids / weight
Spearhead
63-SPH-51
63-IND-1178
Y-Messer couteau-Y / Y-blade
Ø38
10
Messer couteau blade
0
10
41
8
83
Ø15x39
300
39
7770756 2,400
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
Orig.-Nr. / réf. origine / orig.-part-no.
7770725
Gewicht / poids / weight
0,174
Spearhead 63-IND-1179
® Ø38
10
0 10
Messer couteau blade
160
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
330
7770755 2,660
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! 12.12 La référence d´origine présentée ci-dessus ne sert qu´à la coordination! The original part-numbers are only indicated for comparison!
Gruppe 3 Seite 175 groupe/section 3 page 175
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
Spearhead
160
Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding
Messer couteau blade
10 0
12
Marteaux broyeurs et couteaux pour débroussailleuses Pruning hammers and flail mover blades
Hammerschlegel und Schlegelmesser
Marteaux broyeurs et couteaux pour débroussailleuses Pruning hammers and flail mover blades
Spearhead
63-IND-1180R re/dr/ri 63-IND-1180L li/ga/le
Ø38
300
Abb. rechts fig. droit ill. right
7770760 7770761 2,770
Orig.-Nr. / réf. origine / orig.-part-no. re/dr/ri Orig.-Nr. / réf. origine / orig.-part-no. li/ga/le Gewicht / poids / weight
63-IND-1181R re/dr/ri 63-IND-1181L li/ga/le
Ø38
Messer couteau blade
10
0 10
330
Abb. rechts fig. droit ill. right
7770758 7770759 2,940
Orig.-Nr. / réf. origine / orig.-part-no. re/dr/ri Orig.-Nr. / réf. origine / orig.-part-no. li/ga/le Gewicht / poids / weight
Spearhead 1
44
23,5
Ø19,6
2 Ø14
20
Ø30
®
15
35
R1
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
Spearhead
55
71
Best. Nr.: réf. article part-no.
Orig.-Nr. réf. origine orig.-part-no.
1
Hammerschlegel marteau broyeur pruning hammer
63-RM-34
2
Innenbuchse entretoise interne internal bush
63-SPH-91
Gewicht poids weight
0,820
1777721
0,070
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! Gruppe 3 Seite 176 La référence d´origine présentée ci-dessus ne sert qu´à la coordination!
groupe/section 3 page 176
The original part-numbers are only indicated for comparison!
Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved
10
0 10
Messer couteau blade
12.12
Hammerschlegel und Schlegelmesser
Marteaux broyeurs et couteaux pour débroussailleuses Pruning hammers and flail mover blades
Spearhead 10
Ø38
12
1
765
3
35
14
Ø25,5
2 4 75 M24x3
37
Best. Nr.: réf. article part-no.
15
Orig.-Nr. réf. origine orig.-part-no.
Spearhead Gewicht poids weight
63-SPH-03-R 7770718 re/dr/ri 63-SPH-03-L 7770719 li/ga/le
63-IND-270
Schlegel fléau / flail
Ø13x25
7,900
2
Buchse entretoise / bush
63-SPH-90
7770707
0,065
3
Sicherungsmutter écrou à freinage interne self-locking nut
63-2475-1
2770414
0,100
4
Schraube - 10.9 boulon - 10.9 bolt - 10.9
63-2475
2770413
0,380
115
1
Messer couteau blade
6 38
Orig.-Nr. / réf. origine / orig.-part-no.
7770715
0,290
Gewicht / poids / weight
Spearhead 35
25,5
15
Ø25
2
5
,6 Ø13
85
57
1
Hammerschlegel marteau broyeur pruning hammer
2 3
39,5
Ø10
13
60
72
1
15,
42
®
Best. Nr.: réf. article part-no.
3
Ø16,5
Orig.-Nr. réf. origine orig.-part-no.
Gewicht poids weight
63-SPH-92
0,530
Schäkel manille / shackle
63-BOM-76
0,200
Buchse entretoise / bush
63-ZZZ-24
0,055
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! 12.12 La référence d´origine présentée ci-dessus ne sert qu´à la coordination! The original part-numbers are only indicated for comparison!
Gruppe 3 Seite 177 groupe/section 3 page 177
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
23,5
Ø38
M24x3
47
Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding
Abb. rechts fig. droit ill. right
0
Hammerschlegel und Schlegelmesser
Marteaux broyeurs et couteaux pour débroussailleuses Pruning hammers and flail mover blades
Spearhead
35
105
130
8
M14x1,5 17
Best. Nr.: réf. article part-no.
63-SPR-00
1
Schlegel fléau / flail
63-SPH-52
7770699
0,520
2
Innenbuchse entretoise interne / internal bush
63-SPH-91
1777721
0,070
3
Schraube mit Sicherungsmutter - 10.9 boulon avec écrou à freinage interne - 10.9 bolt with self-locking nut - 10.9
63-14115
Schlegel komplett montiert fléau assemblé / flail assembled
63-SPR-03
63-SPR-03
63-716114 165
145
63-716114
180
63-SPR-51
63-SPR-51
63-SPR-02
63-SPR-01
Orig.-Nr. / réf. origine / orig.-part-no.
0,730
Gewicht / poids / weight
Spragelse-Mica 63-SPR-01
63-SPR-02 Klinge lame blade
Ø11,5
48
Ø11,5
7
105
7
65
50
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
0,730
Gewicht / poids / weight
Spragelse-Mica
®
112400
Orig.-Nr. / réf. origine / orig.-part-no.
0,390
65
140
112950
48
Gewicht poids weight
63-SPR-00-02
Schlegel komplett montiert fléau assemblé / flail assembled
Klinge lame blade
Orig.-Nr. réf. origine orig.-part-no.
Spragelse-Mica
130
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
Spragelse-Mica
2
50
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
0,490
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! Gruppe 3 Seite 178 La référence d´origine présentée ci-dessus ne sert qu´à la coordination!
groupe/section 3 page 178
The original part-numbers are only indicated for comparison!
0,176
Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved
Ø21
3 R110
Ø30
SW22
1
23,5
Ø19,6
Ø14
45
12.12
Hammerschlegel und Schlegelmesser
Marteaux broyeurs et couteaux pour débroussailleuses Pruning hammers and flail mover blades
Spragelse-Mica
Spragelse-Mica
63-SPR-05
Klinge lame blade
48
42
63-SPR-200
Halter support / holder
Ø11,5
83
80
7
Ø11,5
26
45
65
Orig.-Nr. / réf. origine / orig.-part-no.
0,250
Gewicht / poids / weight
Spragelse-Mica
Orig.-Nr. / réf. origine / orig.-part-no.
0,700
Gewicht / poids / weight
Spragelse-Mica
63-SPR-53
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
0,360
Spragelse-Mica
63-SPR-03
Buchse entretoise / bush
6
70
63-SPR-51
Halter support / holder
Kunststoffbuchse entretoise plastique / plastic bush
78
27 39
20
Ø12
45
42
6
Orig.-Nr. / réf. origine / orig.-part-no.
0,100
Spragelse-Mica 63-716114
26,5
Orig.-Nr. / réf. origine / orig.-part-no.
112011
Gewicht / poids / weight
0,360
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
0,014
Spragelse-Mica 63-SPR-52
®
Schraube mit Sicherungsmutter - 12.9 boulon avec écrou à freinage interne - 12.9 bolt with self-locking nut - 12.9
Bolzen piton / bolt
Ø10
10,5
Gewicht / poids / weight
,5
45
Ø6
20 33
7/16”
Ø19
6
100
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
0,050
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
0,230
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! 12.12 La référence d´origine présentée ci-dessus ne sert qu´à la coordination! The original part-numbers are only indicated for comparison!
Gruppe 3 Seite 179 groupe/section 3 page 179
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
7
65
190
Ø11,5
Ø28 Ø20
Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding
Klinge lame blade
Spragelse-Mica
63-SPR-06
Hammerschlegel und Schlegelmesser
Marteaux broyeurs et couteaux pour débroussailleuses Pruning hammers and flail mover blades
Staiger
50
rechtes Messer couteau droit 50 right blade
Ø20,5
4
Orig.-Nr. / réf. origine / orig.-part-no.
0,300
Gewicht / poids / weight
linkes Messer couteau gauche 50 left blade
Ø20,5
222
4
63-STA-601
Orig.-Nr. / réf. origine / orig.-part-no.
0,300
Gewicht / poids / weight
Ø20,5
4
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
0,300
Ø10
2 90
1
55
4
M10x1,5
M10x1,5
Orig.-Nr. réf. origine orig.-part-no.
Best. Nr.: réf. article part-no.
25
3
30
40
Gewicht poids weight
1
Y-Messer couteau-Y / Y-blade
63-STE-02
0,100
2
Schraube - 10.9 boulon - 10.9 / bolt - 10.9
105593110
0,040
3
Sicherungsmutter - 8.8 écrou à freinage interne - 8.8 self-locking nut - 8.8
30-MU10-2
0,010
Stoll
Szolnoki Maschinentyp modèle de machine machine type
® 2
GS40
M8x1,25
55
39
Siehe:
23
1 Ø9
21
veuillez voir: / please see:
41
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
Stella
Ø8,5
1
Schäkel manille / shackle
2
Schraube mit Sicherungsmutter - 8.8 Boulon avec écrou à freinage interne - 8.8 Nut with self-locking nut - 8.8
Best. Nr.: réf. article part-no.
Orig.-Nr. Gewicht réf. origine poids orig.-part-no. weight
63-AGT-91
0,060
63-855
0,030
Ungarn
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! Gruppe 3 Seite 180 La référence d´origine présentée ci-dessus ne sert qu´à la coordination!
groupe/section 3 page 180
The original part-numbers are only indicated for comparison!
Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved
Messer couteau blade
63-STA-600
220
63-STA-602
Staiger
220
Staiger
12.12
Hammerschlegel und Schlegelmesser
Marteaux broyeurs et couteaux pour débroussailleuses Pruning hammers and flail mover blades
Taarup
Taarup
63-TAA-51 Klinge lame blade
Taarup
63-TAA-53
40
63-TAA-100
Schlegel komplett montiert fléau assemblé / flail assembled
Bolzen piton / bolt 8,5
Ø14
63-TAA-11
Ø10,5
63-TAA-05 63-TAA-93
185
75 63-TAA-92
130
210
49
Ø19
150
4
63-TAA-14 63-TAA-10
Taarup
0,200
Gewicht / poids / weight
Taarup
63-TAA-11
40
Klinge lame blade
Ø13,5
40
Ø13,5
49303000
Gewicht / poids / weight
55
150
7
38
75
75
Orig.-Nr. / réf. origine / orig.-part-no.
0,600
Taarup
Orig.-Nr. / réf. origine / orig.-part-no.
49304000
Gewicht / poids / weight
0,580
Orig.-Nr. / réf. origine / orig.-part-no.
49305000
Gewicht / poids / weight
0,550
Taarup
63-TAA-93
63-TAA-92
®
Schraube mit Sicherungsmutter - 12.9 boulon avec écrou à freinage interne - 12.9 bolt with self-locking nut - 12.9
1/2”
7
Ø13,5
10
1,820
63-TAA-14
55
Klinge lame blade
49303060
Gewicht / poids / weight
Taarup
63-TAA-10
Halter support / holder
Orig.-Nr. / réf. origine / orig.-part-no.
52
1/2”
26
30
22
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
Schraube mit Sicherungsmutter - 12.9 boulon avec écrou à freinage interne - 12.9 bolt with self-locking nut - 12.9
0,080
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
0,060
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! 12.12 La référence d´origine présentée ci-dessus ne sert qu´à la coordination! The original part-numbers are only indicated for comparison!
Gruppe 3 Seite 181 groupe/section 3 page 181
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
0,550
Gewicht / poids / weight
Orig.-Nr. / réf. origine / orig.-part-no.
130
Orig.-Nr. / réf. origine / orig.-part-no.
100
Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding
25
Hammerschlegel und Schlegelmesser
Marteaux broyeurs et couteaux pour débroussailleuses Pruning hammers and flail mover blades
Taarup
Taarup
Ø5,5
Y-Messer couteau-Y / Y-blade 65
Ø5,5
Ø29
L
Best. Nr.: réf. article part-no.
63-TAA-800 63-TAA-801 63-TAA-802
L 1050 1330 1460
Orig.-Nr. réf. origine orig.-part-no.
ØD
Gewicht poids weight
19,5 47.152.100 19,5 47.203.100 19,5 49.103.100
46
2,430 2,980 3,320
Orig.-Nr. / réf. origine / orig.-part-no.
50.507.00
Gewicht / poids / weight
7
2 3
Ø14
100
150
1
210 185
Ø13,5 8
75
75
,5 38
Ø28 Ø20
43
®1/2"
39
4
5 22
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
Taarup 40
Best. Nr.: réf. article part-no.
Orig.-Nr. réf. origine orig.-part-no.
Gewicht poids weight
1
Schlegel komplett montiert fléau assemblé / flail assembled
63-TAA-00
40880360
1,200
2
Klinge lame / blade
63-TAA-03
40882300
0,580
3
Halter support / holder
63-TAA-04
40880000
0,480
4
Buchse entretoise / bush
63-TAA-05
40881100
0,080
5
Schraube - 12.9 boulon - 12.9 bolt - 12.9
63-TAA-91
40882400
0,070
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! Gruppe 3 Seite 182 La référence d´origine présentée ci-dessus ne sert qu´à la coordination!
groupe/section 3 page 182
215
7
20
The original part-numbers are only indicated for comparison!
0,670
Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved
D
5
63-TAA-02
Welle M20x1,5 / arbre M20x1,5 / axle M20x1,5
12.12
Hammerschlegel und Schlegelmesser
Marteaux broyeurs et couteaux pour débroussailleuses Pruning hammers and flail mover blades
Terral
Terral
63-RM-1-16
Hammerschlegel marteau broyeur pruning hammer
Hammerschlegel marteau broyeur pruning hammer
60
60 16,5
R=
88
88
20,5
R=
150
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
1,430
Terranova
1,450
Gewicht / poids / weight
Terranova
63-MAS-58
Terranova
63-JDE-01
Gerades-Messer couteau droit straight blade 45
Orig.-Nr. / réf. origine / orig.-part-no.
Schlegel fléau flail
63-TRR-03
36
10x45°
17
Schäkel manille / shackle
8x45° Ø14x25
Ø16,5
41,5 22
80
6,5
37
135
Ø9
8
72
3
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
0,350
Terranova 63-MAS-54
Orig.-Nr. / réf. origine / orig.-part-no.
0,140
Gewicht / poids / weight
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
0,054
Terranova 63-MAS-55
®
Y-Messer couteau-Y / Y-blade
Y-Messer couteau-Y / Y-blade 45
Ø25,5 8
Ø16,5 8 136
60
Ø8
65
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
0,810
56
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
0,400
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! 12.12 La référence d´origine présentée ci-dessus ne sert qu´à la coordination! The original part-numbers are only indicated for comparison!
Gruppe 3 Seite 183 groupe/section 3 page 183
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
150
210
Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding
63-RM-1-20
Hammerschlegel und Schlegelmesser
Marteaux broyeurs et couteaux pour débroussailleuses Pruning hammers and flail mover blades
Terranova
63-MAS-57
63-TRR-02
Winkelmesser couteau équerre / L-blade
Ø26
Winkelmesser couteau équerre / L-blade 60
45
Ø25,5
Ø16,5
8
210
8
130
190
Schlegel fléau lail
Terranova
63-TRR-01
8
30
52 60
Orig.-Nr. / réf. origine / orig.-part-no.
0,500
Gewicht / poids / weight
0,450
Gewicht / poids / weight
Tierre
63-TIE-01 Gerades Messer couteau droit straight blade 60
Orig.-Nr. / réf. origine / orig.-part-no.
63-TIE-08 Y-Messer coteau-Y / Y-blade
Hammerschlegel marteau broyeur / pruning hammer Ø25,5
0,890
Gewicht / poids / weight
Tierre
63-RM-94
40
40 Ø16,5
16,5
R= 117
84
Orig.-Nr. / réf. origine / orig.-part-no.
0,800
Gewicht / poids / weight
Tierre
Orig.-Nr. / réf. origine / orig.-part-no.
0,810
Gewicht / poids / weight
Tierre
63-TIE-03
®
60
63-TIE-05 Y-Messer coteau-Y / Y-blade 40
Ø25,5 10
56
Ø16,5 10
214
7
42
56
Orig.-Nr. / réf. origine / orig.-part-no.
0,690
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
1,010
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! Gruppe 3 Seite 184 La référence d´origine présentée ci-dessus ne sert qu´à la coordination!
groupe/section 3 page 184
0,480
Gewicht / poids / weight
Y-Messer coteau-Y / Y-blade
Ø25,5
Gewicht / poids / weight
Orig.-Nr. / réf. origine / orig.-part-no.
Tierre
63-TIE-04
Y-Messer coteau-Y / Y-blade 60
72
135
7
125
212
10
212
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
Tierre
Orig.-Nr. / réf. origine / orig.-part-no.
The original part-numbers are only indicated for comparison!
0,400
Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved
Terranova
12.12
Hammerschlegel und Schlegelmesser
Marteaux broyeurs et couteaux pour débroussailleuses Pruning hammers and flail mover blades
Tornedo 3
Ø8
Ø3,5
23,5
Ø2
18,5
Ø8
Orig.-Nr. réf. origine orig.-part-no.
Best. Nr.: réf. article part-no.
120
2
12
Ø8
26
22
Gewicht poids weight
1
Y-Messer couteau-Y / Y-blade
63-AGR-51
0,040
2
Bolzen mit Splint piton avec goupille / bolt with split-pin
63-TOR-81
0,011
3
Bolzen mit Stift piton avec goupille / bolt with pin
63-TOR-82
0,010
2
Ø8,5
3
Ø8
Ø3,5
23,5
Ø2
Ø8 18
1
Ø7
26
22
3
115 32
18
Orig.-Nr. réf. origine orig.-part-no.
Best. Nr.: réf. article part-no.
Gewicht poids weight
1
Y-Messer couteau-Y / Y-blade
63-TOR-51
0,140
2
Bolzen mit Splint piton avec goupille / bolt with split-pin
63-TOR-81
0,011
3
Bolzen mit Stift piton avec goupille / bolt with pin
63-TOR-82
0,010
Tornedo
1
3
Ø8
Ø2
Ø3,5
26
Ø7
22
3
20
5 18,
Ø8 18
Ø8,5
2
23,5
®
Orig.-Nr. réf. origine orig.-part-no.
Best. Nr.: réf. article part-no.
Gewicht poids weight
1
Y-Messer couteau-Y / Y-blade
63-TOR-52
0,085
2
Bolzen mit Splint piton avec goupille / bolt with split-pin
63-TOR-81
0,011
3
Bolzen mit Stift piton avec goupille / bolt with pin
63-TOR-82
0,010
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! 12.12 La référence d´origine présentée ci-dessus ne sert qu´à la coordination! The original part-numbers are only indicated for comparison!
Gruppe 3 Seite 185 groupe/section 3 page 185
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
Tornedo
105
Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding
2
18
1
Hammerschlegel und Schlegelmesser
Marteaux broyeurs et couteaux pour débroussailleuses Pruning hammers and flail mover blades
Tortella
Tortella
63-RM-41
63-RM-42
Hammerschlegel marteau broyeur pruning hammer
Hammerschlegel marteau broyeur pruning hammer
22,5
R=
R= 11 5
11 4
22,5
165
163 Orig.-Nr. / réf. origine / orig.-part-no.
2,000
Gewicht / poids / weight
Tortella
63-TOR-16
63-TOR-17
Y-Messer coteau-Y / Y-blade
Y-Messer coteau-Y / Y-blade 60
Ø25,5
Ø25,5 10
187
10
160 72
72
Orig.-Nr. / réf. origine / orig.-part-no.
0,900
Gewicht / poids / weight
Tortella
Orig.-Nr. / réf. origine / orig.-part-no.
Tortella
63-TOR-20
Tortella
63-TOR-21
®
Y-Messer coteau-Y / Y-blade 60
0,770
Gewicht / poids / weight
63-NOB-27
Y-Messer coteau-Y / Y-blade
60
Ø22,5
Ø22,5
Y-Messer couteau-Y / Y-blade 45 Ø16,5
8
8 100 50
52
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
0,460
8
56
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
0,430
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! Gruppe 3 Seite 186 La référence d´origine présentée ci-dessus ne sert qu´à la coordination!
groupe/section 3 page 186
125
60
2,430
Gewicht / poids / weight
125
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
Tortella
Orig.-Nr. / réf. origine / orig.-part-no.
The original part-numbers are only indicated for comparison!
0,370
Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved
95
98
12.12
Hammerschlegel und Schlegelmesser
Marteaux broyeurs et couteaux pour débroussailleuses Pruning hammers and flail mover blades
Turner
Turner
63-IND-360
63-TUR-71
5
Ø10,5
Schäkel zur Befestigung von 2 Messern manille pour fixer 2 couteaux shackle for fixing 2 blades
77
125
42 20
Ø11
35
Orig.-Nr. / réf. origine / orig.-part-no.
3012614
0,160
Gewicht / poids / weight
Orig.-Nr. / réf. origine / orig.-part-no.
0,210
Gewicht / poids / weight
38
1
2
Ø4,5 46
5
10,5
Ø10
90
35 Ø3,5
3
Orig.-Nr. réf. origine orig.-part-no.
Best. Nr.: réf. article part-no.
95
Gewicht poids weight
1
Gedrehtes-Messer couteau torsadé / twisted blade
63-EPO-54
0,100
2
Schäkel manille / shackle
63-EPO-73
0,080
3
Spezialfederstecker goupille béta spéciale special spring-pin
63-EPO-81
0,007
Turner 42 16
8,5
46
2
70 32
1
Ø13,5
41
85
1
Hammerschlegel marteau broyeur / pruning hammer
2
Schäkel manille / shackle
Best. Nr.: réf. article part-no.
63-RM-17
45
Ø15
®
Orig.-Nr. réf. origine orig.-part-no.
Gewicht poids weight
13800
0,440
63-BOM-72 05.895.01
0,150
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! 12.12 La référence d´origine présentée ci-dessus ne sert qu´à la coordination! The original part-numbers are only indicated for comparison!
Gruppe 3 Seite 187 groupe/section 3 page 187
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
Turner
24
Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding
Gedrehtes-Messer couteau torsadé twisted blade
Hammerschlegel und Schlegelmesser
Marteaux broyeurs et couteaux pour débroussailleuses Pruning hammers and flail mover blades
Turner
Ø24
21
2
48 23
Schlegel fléau / flail
2
0,330
Schäkel manille / shackle
63-TUR-72
0,230
3
Buchse entretoise / bush
63-TUR-81
0,040
4
Schraube mit Sicherungsmutter-12.9 boulon avec écrou à freinage interne-12.9 bolt with self-locking nut-12.9
63-TUR-91
0,150
Turner
Turner
Turner
Schlegel fléau flail
Schlegel fléau flail
Schlegel fléau flail
63-EPO-52
Ø15,5x34
Ø11,5x34
10
100
10
63-EPO-53 Ø14x38
10
92
63-EPO-51
40
40 32
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
0,230
Orig.-Nr. / réf. origine / orig.-part-no.
0,260
Gewicht / poids / weight
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
0,340
Turner Best. Nr.: réf. article part-no.
Schäkel ® manilles / shackles
L A ØD
H
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
Ø13
M14x2
Gewicht poids weight
63-TUR-51
73
14,5
1
Orig.-Nr. réf. origine orig.-part-no.
Best. Nr.: réf. article part-no.
120
40
Ø16
20
1
4 90
95
12
63-EPO-71 63-EPO-72 63-EPO-74 63-EPO-75 63-EPO-76
L
H
ØD
A
42 42 32 45 38
71 74 83 83 69
11 12 10 10 10
20 18 12 25 18
Orig.-Nr. réf. origine orig.-part-no.
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! Gruppe 3 Seite 188 La référence d´origine présentée ci-dessus ne sert qu´à la coordination!
groupe/section 3 page 188
The original part-numbers are only indicated for comparison!
Gewicht poids weight
0,180 0,210 0,160 0,160 0,140
Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved
3
Ø16x35
12.12
Hammerschlegel und Schlegelmesser
Marteaux broyeurs et couteaux pour débroussailleuses Pruning hammers and flail mover blades
Turner Best. Nr.: réf. article part-no.
L
G
Güte qualité quality
Gewicht poids weight
63-1250-1 63-1260-1 63-1265-1 63-1270-1
M12x1,75 M12x1,75 M12x1,75 M12x1,75
50 60 65 70
32 32 32 35
10.9 10.9 10.9 10.9
0,070 0,080 0,085 0,090
63-1264
1/2“ UNF
64
32
8.8
0,090
63-14120
M14x2
120
37
8.8
0,180
G
L
Gewinde filet thread
1
2
16
M16x2
70 16,5
Orig.-Nr. réf. origine orig.-part-no.
Gewicht poids weight
88
Best. Nr.: réf. article part-no.
1
170
2
Selbstsichernde Mutter - Gedrückt écrou à freinage interne - embouti self-locking nut - pressed
3
Schraube - 10.9 boulon - 10.9 bolt - 10.9
130
3
50
Tünnißen & Stocks 63-IND-70
63-HUM-97
0,036
63-16131
0,260
63-IND-71
®
Winkelmesser couteau équerre / L-blade 61
120
Ø20,5
8
2,000
Tünnißen & Stocks
Bogenmesser couteau coudé / arched blade 61
63-M-1
Ø20,5
122
M16x2
Hammerschlegel marteau broyeur / pruning hammer
8
56
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
0,480
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
0,490
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! 12.12 La référence d´origine présentée ci-dessus ne sert qu´à la coordination! The original part-numbers are only indicated for comparison!
Gruppe 3 Seite 189 groupe/section 3 page 189
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
Tünnißen & Stocks
R=
Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding
Schrauben mit Sicherungsmuttern boulons avec écrous à freinage interne bolts with self-locking nuts
Hammerschlegel und Schlegelmesser
Marteaux broyeurs et couteaux pour débroussailleuses Pruning hammers and flail mover blades
Tünnißen & Stocks 7
20,5
2
41
0 10
3
=
R
7
195
Best. Nr.: réf. article part-no.
Hammerschlegel marteau broyeur / pruning hammer
2
5
Gewicht poids weight
63-RM-16
2,125
Sicherungsring bague de sécurité / safety ring
63-PER-62
0,003
3
Stützscheibe rondelle / washer
63-PER-63
0,016
4
Spannbuchse entretoise de serrage / clamping bush
63-PER-64
0,030
5
Spannbuchse entretoise de serrage / clamping bush
63-PER-65
0,020
6
Schraube mit Sicherungsmutter-10.9 boulon avec écrou à freinage interne-10.9 bolt with self-locking nut-10.9
63-20140
0,440
Tünnißen & Stocks 63-9001
®
Buchse entretoise / bush
Twose
Twose
63-RM-48
63-RM-800
Hammerschlegel marteau broyeur pruning hammer
Hammerschlegel marteau broyeur pruning hammer
38
20
26
58
7 R=
R1 35 60
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
26
Ø20
Ø10,5
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
1
Orig.-Nr. réf. origine orig.-part-no.
Ø27
140 55
5
15
Ø21
5
Ø21
6 M20x2,5
Ø27
4
19,5
0,035
75
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
0,850
68
60
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! Gruppe 3 Seite 190 La référence d´origine présentée ci-dessus ne sert qu´à la coordination!
groupe/section 3 page 190
5
The original part-numbers are only indicated for comparison!
0,760
Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved
74
Ø20,5
Ø35,5
1
12.12
Hammerschlegel und Schlegelmesser
Marteaux broyeurs et couteaux pour débroussailleuses Pruning hammers and flail mover blades
UgelØse
UgelØse
63-UGE-01
UgelØse
63-UGE-02
Schlegel fléau flail
Schlegel fléau flail
40
Schlegel fléau flail
Ø11,5
Ø14,5
43122
Orig.-Nr. / réf. origine / orig.-part-no.
UG7133
0,920
Gewicht / poids / weight
Gewicht / poids / weight
UgelØse
0,480
UgelØse
63-UGE-52
UG4312
0,490
Gewicht / poids / weight
Ungarn
63-UGE-53
Y-Messer couteau-Y / Y-blade
Orig.-Nr. / réf. origine / orig.-part-no.
63-UNG-01
Gerades Messer couteau droit straight blade
Messer couteau blade
80
Ø12,5
Ø29
30
65
Ø29
195
215
6
220
6
6
54
Orig.-Nr. / réf. origine / orig.-part-no.
UG4233
Orig.-Nr. / réf. origine / orig.-part-no.
UG4230
0,690
Gewicht / poids / weight
Gewicht / poids / weight
0,620
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
0,680
Ungarn Ø17
54
10
Ø35
1
3 40
M16x2
2
34 46
42
1 90
Ø30
Ø35,5
Ø49
®
100
Mulchmesser couteau broyeur / comminution blade
2
Buchse entretoise bush
3
Schraube mit Sicherungsmutter-10.9 boulon avec écrou à freinage interne-10.9 bolt with self-locking nut-10.9
Orig.-Nr. réf. origine orig.-part-no.
Gewicht poids weight
63-IND-141
199-RZ3
2,700
63-UNG-99
198-RZ3
0,330
63-1690
220-RZ3 217-RZ3
0,200
Best. Nr.: réf. article part-no.
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! 12.12 La référence d´origine présentée ci-dessus ne sert qu´à la coordination! The original part-numbers are only indicated for comparison!
Gruppe 3 Seite 191 groupe/section 3 page 191
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
Orig.-Nr. / réf. origine / orig.-part-no.
140
75
75
75
65
6
145
6
195
6
360
Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding
35
21
63-UGE-03
Hammerschlegel und Schlegelmesser
Marteaux broyeurs et couteaux pour débroussailleuses Pruning hammers and flail mover blades
Ungarn 2
295
Ø35
Abb. rechts fig. droit ill. right
10
90
40
M16x2
Best. Nr.: réf. article part-no.
34 46
42
Mulchmesser verdreht - kurz couteau-broyeur torsadé - court twisted comminution blade - short
1 3
54
2
Buchse entretoise bush
3
Schraube mit Sicherungsmutter-10.9 boulon avec écrou à freinage interne-10.9 bolt with self-locking nut-10.9
Orig.-Nr. réf. origine orig.-part-no.
Gewicht poids weight
63-IND-155R re/dr/ri 63-IND-155L li/ga/le
268-RZ3
63-UNG-99
198-RZ3
0,330
63-1690
220-RZ3 217-RZ3
0,200
Orig.-Nr. réf. origine orig.-part-no.
Gewicht poids weight
269-RZ3
2,170
Ø17
2 Ø35
Abb. rechts fig. droit ill. right
54
10
Mulchmesser verdreht - lang couteau-broyeur torsadé - long twisted comminution blade - long
1 2
Buchse entretoise bush
3
Schraube mit Sicherungsmutter-10.9 boulon avec écrou à freinage interne-10.9 bolt with self-locking nut-10.9
3 40
34 46
42
90
M16x2
Best. Nr.: réf. article part-no.
Ø49
1
Ø35
Ø30
100
360
63-IND-156R re/dr/ri 63-IND-156L li/ga/le
222-RZ3
63-UNG-99
198-RZ3
0,330
63-1690
220-RZ3 217-RZ3
0,200
Orig.-Nr. réf. origine orig.-part-no.
Gewicht poids weight
221-RZ3
2,700
Uni Farm 3
1
80
60
4 40
M16x2
3
Ø25
8
Ø17
28
Ø35
2
®
Ø25,5
Ø16,5
60
245
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
Ungarn
Best. Nr.: réf. article part-no.
1
Y-Messer couteau-Y / Y-blade
63-FEI-02
0,960
2
Buchse entretoise / bush
63-FEI-63
0,054
3
Scheibe rondelle / washer
63-FEI-64
0,020
4
Schraube mit Sicherungsmutter-10.9 boulon avec écrou à freinage interne-10.9 bolt with self-locking nut-10.9
63-1660
0,150
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! Gruppe 3 Seite 192 La référence d´origine présentée ci-dessus ne sert qu´à la coordination!
groupe/section 3 page 192
The original part-numbers are only indicated for comparison!
Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved
Ø17
Ø49
1
Ø35
Ø30
100
12.12
Hammerschlegel und Schlegelmesser
Marteaux broyeurs et couteaux pour débroussailleuses Pruning hammers and flail mover blades
Vigolo
Vigolo
63-RM-6
63-FEI-02 Y-Messer couteau-Y / Y-blade
Hammerschlegel marteau broyeur pruning hammer 60
Ø25,5
R= 95
245
8
16,5
80
137
Orig.-Nr. / réf. origine / orig.-part-no.
1,600
Gewicht / poids / weight
0,960
Gewicht / poids / weight
Vigolo
63-RM-7-16
63-ZZZ-16 Y-Messer couteau-Y / Y-blade
Hammerschlegel marteau broyeur / pruning hammer 60 16,5
22
Ø25,5
120
8
70
108
Vigolo
Vigolo
Vigolo
63-VIG-03
®
Y-Messer couteau-Y / Y-blade
Y-Messer couteau-Y / Y-blade 60
Ø25,5
204
8
63-ZZZ-15
Ø25,5
8
8
75
55
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
Schlegel fléau flail
200
63-SIC-02 60
0,470
Gewicht / poids / weight
Ø30
0,780
Gewicht / poids / weight
Orig.-Nr. / réf. origine / orig.-part-no.
130
Orig.-Nr. / réf. origine / orig.-part-no.
0,760
Orig.-Nr. / réf. origine / orig.-part-no.
VI0022
Gewicht / poids / weight
0,800
40
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! 12.12 La référence d´origine présentée ci-dessus ne sert qu´à la coordination! The original part-numbers are only indicated for comparison!
0,520
Gruppe 3 Seite 193 groupe/section 3 page 193
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
Vigolo
Orig.-Nr. / réf. origine / orig.-part-no.
R= 10 5
Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding
40
Hammerschlegel und Schlegelmesser
Marteaux broyeurs et couteaux pour débroussailleuses Pruning hammers and flail mover blades
Vigolo 55
1
79 Ø26
3
25
Best. Nr.: réf. article part-no.
Ø25
R 165
M20x1,5
M20x1,5
20
4
63-RM-91
1,650
Schraube - 10.9 boulon - 10.9 / bolt - 10.9
63-VIG-900
0,518
3
Scheibe rondelle / washer
63-VIG-901
0,064
4
Selbstsichernde Sechskantmutter - 10.9 écrou hexagonal à freinage interne - 10.9 self-locking hexagon nut - 10.9
51-20RMU
0,060
Vogel & Noot
63-NOB-02
63-NOB-16
Y-Messer couteau-Y / Y-blade 40
Y-Messer couteau-Y / Y-blade 40
Ø16,5
Ø16,5 8
175
8
60
42
Orig.-Nr. / réf. origine / orig.-part-no.
360 150 92
0,450
Gewicht / poids / weight
Orig.-Nr. / réf. origine / orig.-part-no.
0,330
Gewicht / poids / weight
Vogel & Noot ®
3 30
M20x2,5
22
204
49
10
1
1
Y-Messer couteau-Y / Y-blade
2
Ø11
4
57 50
77
75
7
M20x2,5
2 24 Best. Nr.: réf. article part-no.
Orig.-Nr. réf. origine orig.-part-no.
0,920
Bolzen piton / bolt
63-KUH-900
0,460
3
Selbstsichernde Sechskantmutter écrou hexagonal à freinage interne self-locking hexagon nut
63-KUH-901
0,050
4
Halter bride de support / holder
63-HAL-01
0,530
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! Gruppe 3 Seite 194 La référence d´origine présentée ci-dessus ne sert qu´à la coordination!
groupe/section 3 page 194
Gewicht poids weight
63-NOB-05
57 Ø25
46
5
Ø25,5
Ø2
60
70
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
Vogel & Noot
2
Gewicht poids weight
135
105
1
Hammerschlegel marteau broyeur / pruning hammer
Orig.-Nr. réf. origine orig.-part-no.
The original part-numbers are only indicated for comparison!
Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved
49
56
Ø48 Ø28
2
7
6
12.12
Hammerschlegel und Schlegelmesser
Marteaux broyeurs et couteaux pour débroussailleuses Pruning hammers and flail mover blades
Vogel & Noot 1 60
3
Ø25,5
2
Ø25 70
Ø11
5 Ø2
1
7 M20x2,5 Gerades-Messer couteau droit / straight blade
2
57
77
Gewicht poids weight
63-NOB-04
0,850
Bolzen piton / bolt
63-KUH-900
0,460
3
Selbstsichernde Sechskantmutter écrou hexagonal à freinage interne self-locking hexagon nut
63-KUH-901
0,050
4
Halter bride de support / holder
63-HAL-01
0,530
4 50
Orig.-Nr. réf. origine orig.-part-no.
Best. Nr.: réf. article part-no.
204
10
2
80
60
4 40
M16x2
63-VIG-03
Gewicht poids weight
1
Y-Messer couteau-Y / Y-blade
63-FEI-02
0,960
2
Buchse entretoise / bush
63-FEI-63
0,054
3
Scheibe rondelle / washer
63-FEI-64
0,020
4
Schraube mit Sicherungsmutter-10.9 boulon avec écrou à freinage interne-10.9 bolt with self-locking nut-10.9
63-1660
0,150
Vogel & Noot ®
Y-Messer couteau-Y / Y-blade
SW-27
1
40
2 16,5
Ø25,5
M16x2
R=
200
8
95
28
60
Orig.-Nr. réf. origine orig.-part-no.
Best. Nr.: réf. article part-no.
100
Vogel & Noot
Ø25
8
Ø16,5
1
3
3
28
Ø35
Ø25,5
Ø17
60
137
75
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
0,800
Orig.-Nr. réf. origine orig.-part-no.
Best. Nr.: réf. article part-no.
Gewicht poids weight
1
Hammerschlegel marteau broyeur / pruning hammer
63-RM-6
930000024 1,600
2
Schraube mit Sicherungsmutter-10.9 boulon avec écrou à freinage interne-10.9 bolt with self-locking nut-10.9
63-16101
771610020 0,220
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! 12.12 La référence d´origine présentée ci-dessus ne sert qu´à la coordination! The original part-numbers are only indicated for comparison!
Gruppe 3 Seite 195 groupe/section 3 page 195
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
Vogel & Noot
245
Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding
24
22
30
49
M20x2,5
75
46
Hammerschlegel und Schlegelmesser
Marteaux broyeurs et couteaux pour débroussailleuses Pruning hammers and flail mover blades
Vogel & Noot 6
55
1 Ø26
Best. Nr.: réf. article part-no.
R 165
M20x1,5
105
M20x1,5
20
4
Gewicht poids weight
1
Hammerschlegel marteau broyeur / pruning hammer
2
Schraube - 10.9 boulon - 10.9 / bolt - 10.9
63-VIG-900 112.3000.003 0,518
3
Scheibe rondelle / washer
63-VIG-901
0,064
4
Selbstsichernde Sechskantmutter - 10.9 écrou hexagonal à freinage interne - 10.9 self-locking hexagon nut - 10.9
51-20RMU
0,060
63-RM-91
111190000
1,650
Vogel & Noot
63-ZZZ-15
63-MAS-54
Ø30
Y-Messer couteau-Y / Y-blade
60
Ø25,5
130
210
8 8
40
65
Orig.-Nr. / réf. origine / orig.-part-no.
11087003
Gewicht / poids / weight
Orig.-Nr. / réf. origine / orig.-part-no.
11019006
0,520
0,810
Gewicht / poids / weight
Vogel & Noot 3
Ø25,5 8
1
Ø45
4 12
112
Ø28
SW-27
100
®
60
28
M16x2
73
Orig.-Nr. réf. origine orig.-part-no.
Gewicht poids weight
1
Y-Messer couteau-Y / Y-blade
2
Buchse entretoise / bush
63-ZZZ-48
110220003
0,140
3
Scheibe rondelle / washer
63-ZZZ-47
102130000
0,090
Ø17
4
Schraube mit Sicherungsmutter - 10.9 boulon avec écrou à freinage interne - 10.9 bolt with self-locking nut - 10.9
63-16101
771610020
0,220
76
2
Best. Nr.: réf. article part-no.
Ø25
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
Vogel & Noot
Orig.-Nr. réf. origine orig.-part-no.
63-IND-1050 9300000029 0,480
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! Gruppe 3 Seite 196 La référence d´origine présentée ci-dessus ne sert qu´à la coordination!
groupe/section 3 page 196
The original part-numbers are only indicated for comparison!
Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved
49
25
Ø25
Schlegel fléau flail
3 7
79
56
Ø48 Ø28
2
12.12
Hammerschlegel und Schlegelmesser
Marteaux broyeurs et couteaux pour débroussailleuses Pruning hammers and flail mover blades
Votex
Votex
63-M-1
63-VOT-01
Hammerschlegel marteau broyeur pruning hammer
75 28
Ø30
70 16,5
0 31
R=
88
7
170
35.10.030/3 1,210
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
Orig.-Nr. / réf. origine / orig.-part-no.
76.03.012
2,000
Gewicht / poids / weight
Votex
1
2
M16x2
Orig.-Nr. réf. origine orig.-part-no.
235
85
7
Best. Nr.: réf. article part-no.
R=
Ø30
130
16,5
Schlegelmesser fléau / flail
75
50
70
155
63-VOT-02
Gewicht poids weight
1
Hammerschlegel marteau broyeur / pruning hammer
63-RM-3
1,500
2
Schraube mit Sicherungsmutter-10.9 boulon avec écrou à freinage interne-10.9 bolt with self-locking nut-10.9
63-16130
0,200
Orig.-Nr. / réf. origine / orig.-part-no.
3514020
Gewicht / poids / weight
Votex
0,930
Votex
63-ZAP-29
2
M16x2
Schlegel fléau / flail
50
70
130
16,5
185
1
Hammerschlegel marteau broyeur / pruning hammer
2
Schraube mit Sicherungsmutter-10.9 boulon avec écrou à freinage interne-10.9 bolt with self-locking nut-10.9
Best. Nr.: réf. article part-no.
Orig.-Nr. réf. origine orig.-part-no.
Ø12,5x32,5
Gewicht poids weight
63-RM-5-16
2,000
63-16130
0,200
10
97
1
®
35
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! 12.12 La référence d´origine présentée ci-dessus ne sert qu´à la coordination! The original part-numbers are only indicated for comparison!
0,230
Gruppe 3 Seite 197 groupe/section 3 page 197
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
Votex
R= 88
Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding
Schlegelmesser fléau flail
Hammerschlegel und Schlegelmesser
Marteaux broyeurs et couteaux pour débroussailleuses Pruning hammers and flail mover blades
Votex
Ø20
Ø12
98
4
24
1 35 43 23
Ø10
Schlegel fléau / flail
63-VOT-52
45.03.030 0,240
2
Schäkel manille / shackle
63-VOT-73
45.03.060
0,170
3
Buchse entretoise / bush
63-VOT-61
45.03.072
0,030
4
Schraube mit Sicherungsmutter-12.9 boulon avec écrou à freinage interne-12.9 bolt with self-locking nut-12.9
63-VOT-91
45.03.170
0,065
Votex
Votex
63-VOT-63 Schäkel manille / shackle
2
48 23
73
1
43,5 21,5
14,5
40
11,5
67
12
95
Ø16x35
Ø11
Ø13
Orig.-Nr. / réf. origine / orig.-part-no.
4
45.03.061
Ø16
90
5
Votex
M14x2
63-RM-47
20
21
® Best. Nr.: réf. article part-no.
Orig.-Nr. réf. origine orig.-part-no.
Gewicht poids weight
1
Schlegel fléau / flail
63-VOT-55
45.03.190
0,230
2
Schäkel manille / shackle
63-TUR-72
45.03.200
0,230
3
Buchse entretoise / bush
63-TUR-81
45.03.210
0,040
4
Schraube mit Sicherungsmutter-12.9 boulon avec écrou à freinage interne-12.9 bolt with self-locking nut-12.9
63-TUR-91
Hammerschlegel marteau broyeur / pruning hammer
43
16,5
105
45.03.220
0,150
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! Gruppe 3 Seite 198 La référence d´origine présentée ci-dessus ne sert qu´à la coordination!
groupe/section 3 page 198
0,150
Gewicht / poids / weight
R= 1 20
Ø24
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
Gewicht poids weight
1
80
2
Orig.-Nr. réf. origine orig.-part-no.
Best. Nr.: réf. article part-no.
The original part-numbers are only indicated for comparison!
1,270
Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved
20
10
75
M10x1,5
3
Ø14x33
12.12
Hammerschlegel und Schlegelmesser
Marteaux broyeurs et couteaux pour débroussailleuses Pruning hammers and flail mover blades
Votex 1
17
90
47
24
35
65
M10x1,5 28
Orig.-Nr. réf. origine orig.-part-no.
Best. Nr.: réf. article part-no.
Gewicht poids weight
1
Gedrehtes-Messer couteau torsadé / twisted blade
63-EPO-54
0,100
2
Schäkel manille / shackle
63-HAN-71
0,070
3
Schraube mit Sicherungsmutter-10.9 boulon avec écrou à freinage interne-10.9 bolt with self-locking nut-10.9
63-1065-1
0,060
Votex 45
1
40
63-IND-139
2
Y-Messer couteau-Y / Y-blade
Ø10
100
5
31
Best. Nr.: réf. article part-no.
73
Ø13x27 30
Orig.-Nr. réf. origine orig.-part-no.
Ø14x30
Gewicht poids weight
1
Y-Messer couteau-Y / Y-blade
63-MUL-53 45.03.020
0,130
2
Schäkel manille / shackle
63-VOT-71
45.03.050
0,145
4
25
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
0,080
Votex ®
75
M10x1,5 24
1
4 Ø12
5
35 43 23
Ø10
3 Best. Nr.: réf. article part-no.
Orig.-Nr. réf. origine orig.-part-no.
Gewicht poids weight
1
Schlegel fléau / flail
63-VOT-53
45.03.010
0,130
2
Schäkel manille / shackle
63-VOT-73
45.03.060
0,170
3
Buchse entretoise / bush
63-VOT-61
45.03.072
0,030
4
Schraube mit Sicherungsmutter-12.9 boulon avec écrou à freinage interne-12.9 bolt with self-locking nut-12.9
63-VOT-91
45.03.170
0,065
80
2
20
Ø20
Ø11x32
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! 12.12 La référence d´origine présentée ci-dessus ne sert qu´à la coordination! The original part-numbers are only indicated for comparison!
Gruppe 3 Seite 199 groupe/section 3 page 199
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
Votex
90
3
Ø10
100
Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding
2
37
Ø10,5
5
10,5
Hammerschlegel und Schlegelmesser
Marteaux broyeurs et couteaux pour débroussailleuses Pruning hammers and flail mover blades
Willibald
63-IND-46
Buchse entretoise / bush
63-CLE-01
Y-Messer couteau-Y / Y-blade
Ø35 Ø21
50
Y-Messer couteau-Y / Y-blade 40 Ø22,5
Ø20,5
8
35
120
8
73
53
Orig.-Nr. / réf. origine / orig.-part-no.
0,168
Gewicht / poids / weight
Orig.-Nr. / réf. origine / orig.-part-no.
210-41-002
Gewicht / poids / weight
0,390
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
0,330
20,5
SW-32
3 150
1 R= 110
M20x2,5
5 15
14
63
159
2
33
33
86
Best. Nr.: réf. article part-no.
Orig.-Nr. réf. origine orig.-part-no.
Gewicht poids weight
1
Hammerschlegel marteau broyeur / pruning hammer
2
Schraube mit Sicherungsmutter-10.9 boulon avec écrou à freinage interne-10.9 bolt with self-locking nut-10.9
63-WIL-52
0,460
Schraube mit Sicherungsmutter-10.9 boulon avec écrou à freinage interne-10.9 bolt with self-locking nut-10.9
63-20151
E-223-41-006 0,484
3
35
M20x2,5
63-RM-2
E-230-40-68E 1,800
Willibald ®
1
SW-32
86
150
3
R= 90
M20x2,5
206 14 159 33 35
M20x2,5
33
20,5
63
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
Willibald
Best. Nr.: réf. article part-no.
Orig.-Nr. réf. origine orig.-part-no.
1
Hammerschlegel marteau broyeur / pruning hammer
63-WIL-51 E-226-40-0-18 2,240
2
Schraube mit Sicherungsmutter-10.9 boulon avec écrou à freinage interne-10.9 bolt with self-locking nut-10.9
63-WIL-52
Schraube mit Sicherungsmutter-10.9 boulon avec écrou à freinage interne-10.9 bolt with self-locking nut-10.9
63-20151
2 3
0,460 E-223-41-006
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! Gruppe 3 Seite 200 La référence d´origine présentée ci-dessus ne sert qu´à la coordination!
groupe/section 3 page 200
Gewicht poids weight
The original part-numbers are only indicated for comparison!
0,484
Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved
63-EPO-84
Willibald
110
Willibald
12.12
Hammerschlegel und Schlegelmesser
Marteaux broyeurs et couteaux pour débroussailleuses Pruning hammers and flail mover blades
Wiwexa Ø8,5
2
1
Ø8 23,5
Ø2
105
22
3
20
Orig.-Nr. réf. origine orig.-part-no.
Best. Nr.: réf. article part-no.
5 18,
Gewicht poids weight
1
Y-Messer mit Kettenglied und Befestigungslasche couteau-Y avec maillon de chaîne et éclisse de fixation Y-blade with chain-link and holder
63-TOR-52
0,085
2
Bolzen mit Splint piton avec goupille / bolt with split-pin
63-TOR-81
0,011
Ø8,5
1
2
Ø8 23,5
Ø2 Ø7
22
3
Y-Messer mit Kettenglied und Befestigungslasche couteau-Y avec maillon de chaîne et éclisse de fixation Y-blade with chain-link and holder
63-TOR-51
0,140
2
Bolzen mit Splint piton avec goupille / bolt with split-pin
63-TOR-81
0,011
Zampini
Zampini
Zampini
63-FEI-13
®
Y-Messer couteau-Y / Y-blade
Y-Messer couteau-Y / Y-blade 40
Ø18x36 115
7
63-FEI-04
60
Ø14x29 8
Ø25,5 8
43
51
73
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
Y-Messer couteau-Y / Y-blade
145
18
63-GIM-03
Gewicht poids weight
1
85
32
40
Orig.-Nr. réf. origine orig.-part-no.
Best. Nr.: réf. article part-no.
0,230
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
0,210
59
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! 12.12 La référence d´origine présentée ci-dessus ne sert qu´à la coordination! The original part-numbers are only indicated for comparison!
0,520
Gruppe 3 Seite 201 groupe/section 3 page 201
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
Wiwexa
115
Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding
Ø7
Hammerschlegel und Schlegelmesser
Marteaux broyeurs et couteaux pour débroussailleuses Pruning hammers and flail mover blades
Zanon
63-NOB-16
63-RM-8
Y-Messer couteau-Y / Y-blade
Y-Messer couteau-Y / Y-blade
Hammerschlegel marteau broyeur pruning hammer
30
Ø10x14
Ø16,5
Vernietet rivé riveted
40 16,5
R= 90
135
8
6 100
40
Zanon
63-ZZZ-25
42
120
0,330
Gewicht / poids / weight
68.3350012
0,147
Gewicht / poids / weight
Zanon
63-M-37-14
Orig.-Nr. / réf. origine / orig.-part-no.
63-FEI-13
Y-Messer couteau-Y / Y-blade
Hammerschlegel marteau broyeur pruning hammer 40 14,5
40
Y-Messer couteau-Y / Y-blade 40
Ø20,5
Ø14x29 8
00
119
8
85
0,730
Gewicht / poids / weight
Zanon
63-AGM-03
43
53
Orig.-Nr. / réf. origine / orig.-part-no.
Orig.-Nr. / réf. origine / orig.-part-no.
0,300
Gewicht / poids / weight
Zanon
0,210
Gewicht / poids / weight
63-RM-8-14
Hammerschlegel marteau broyeur pruning hammer
Y-Messer couteau-Y / Y-blade
Orig.-Nr. / réf. origine / orig.-part-no.
Zanon
63-RM-10-20
®
1,150
Gewicht / poids / weight
Zanon
63-ZZZ-17
R=1
Hammerschlegel marteau broyeur pruning hammer
40 Ø20,5
55
8
40
20,5
14,5
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
0,300
R=
52
R= 90
100
120
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
Zanon
Orig.-Nr. / réf. origine / orig.-part-no.
85
Orig.-Nr. / réf. origine / orig.-part-no.
120
150 Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
1,850
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! Gruppe 3 Seite 202 La référence d´origine présentée ci-dessus ne sert qu´à la coordination!
groupe/section 3 page 202
The original part-numbers are only indicated for comparison!
1,150
Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved
Zampini
12.12
Hammerschlegel und Schlegelmesser
Marteaux broyeurs et couteaux pour débroussailleuses Pruning hammers and flail mover blades
Zappator
Zappator
63-ZAP-08
Zappator
63-ZAP-09
Y-Messer couteau-Y / Y-blade
63-ZAP-10
Gerades Messer couteau droit straight blade 50
50
Gerades Messer couteau droit straight blade
Ø20,5
60
Ø20,5 10 120
180
185
10
10
62
Orig.-Nr. / réf. origine / orig.-part-no.
0,680
Gewicht / poids / weight
Zappator
Orig.-Nr. / réf. origine / orig.-part-no.
0,650
Gewicht / poids / weight
Orig.-Nr. / réf. origine / orig.-part-no.
0,490
Gewicht / poids / weight
35
42
Orig.-Nr. / réf. origine / orig.-part-no.
1
Y-Messer couteau-Y / Y-blade
2
Schraube mit Sicherungsmutter-12.9 boulon avec écrou à freinage interne-12.9 bolt with self-locking nut-12.9
34
Gewicht poids weight
63-ZAP-13
0,198
63-1450
0,100
0,110
Gewicht / poids / weight
Zappator
Zappator
63-MUL-71
Orig.-Nr. réf. origine orig.-part-no.
Best. Nr.: réf. article part-no.
42
98
4
105
6
50
M14x2
Ø14,5
Ø10,5
2
1
40
Y-Messer couteau-Y / Y-blade
Zappator
63-MUL-72
®
63-ZAP-29
Schäkel manille / shackle
Schäkel manille / shackle
Schlegel fléau / flail Ø12,5x32,5
48 25,5
75
52
10
97
48
11,4
Ø11
Ø11
35
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
0,110
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
0,150
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! 12.12 La référence d´origine présentée ci-dessus ne sert qu´à la coordination! The original part-numbers are only indicated for comparison!
0,230
Gruppe 3 Seite 203 groupe/section 3 page 203
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
Zappator
63-ZAP-12
Ø11,5
Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding
Ø20,5
Hammerschlegel und Schlegelmesser
Marteaux broyeurs et couteaux pour débroussailleuses Pruning hammers and flail mover blades
Zappator
63-RM-10-20
63-RM-8-20
Hammerschlegel marteau broyeur pruning hammer
Hammerschlegel marteau broyeur pruning hammer
20,5
40
40 20
R=
R=
10 0
110
20,5
Hammerschlegel marteau broyeur pruning hammer
118
120
Orig.-Nr. / réf. origine / orig.-part-no.
1,850
Gewicht / poids / weight
Zappator
Orig.-Nr. / réf. origine / orig.-part-no.
1,313
Gewicht / poids / weight
Zappator
63-SM-01
63-ZAP-03
Y-Messer couteau-Y / Y-blade 60
60
Ø14x30
Ø20,5 10
82
5
42
0,140
Zappator 63-RM-8
Hammerschlegel marteau broyeur pruning hammer
Ø20,5 10
70
60
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
Y-Messer couteau-Y / Y-blade
150
40
Orig.-Nr. / réf. origine / orig.-part-no.
0,710
Gewicht / poids / weight
Zappator
0,630
Gewicht / poids / weight
63-RM-4
Hammerschlegel marteau broyeur pruning hammer
Hammerschlegel marteau broyeur pruning hammer
55
40
Orig.-Nr. / réf. origine / orig.-part-no.
Zappator
63-RM-10-16
®
1,120
Gewicht / poids / weight
Zappator
63-ZAP-01
Y-Messer couteau-Y / Y-blade
Orig.-Nr. / réf. origine / orig.-part-no.
120
150
R= 90
55
40
16,5
16,5
100 R=
120
150
120 Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
R= 110
16,5
R= 90
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
Zappator
63-RM-4-20
1,150
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
1,770
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! Gruppe 3 Seite 204 La référence d´origine présentée ci-dessus ne sert qu´à la coordination!
groupe/section 3 page 204
The original part-numbers are only indicated for comparison!
1,350
Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved
Zappator
12.12
Universalmesser Couteaux universels All-purpose blades
63-UNI-02
Y-Messer couteau-Y / Y-blade 40
41 Ø14,5x34
95
6
34
36
Orig.-Nr. / réf. origine / orig.-part-no.
0,140
Gewicht / poids / weight
7
96
5
Ø15x34
63-UNI-04
38
Orig.-Nr. / réf. origine / orig.-part-no.
0,160
Gewicht / poids / weight
63-UNI-05
Y-Messer couteau-Y / Y-blade
Orig.-Nr. / réf. origine / orig.-part-no.
63-UNI-06
Y-Messer couteau-Y / Y-blade
Y-Messer couteau-Y / Y-blade 40
45
40
Ø16x41
Ø16x38
98
8
44
0,290
Gewicht / poids / weight
63-UNI-09
41
40
50
Orig.-Nr. / réf. origine / orig.-part-no.
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
0,190
63-UNI-08
®
Y-Messer couteau-Y / Y-blade
8
100
Ø16x30 8
0,190
Gewicht / poids / weight
Orig.-Nr. / réf. origine / orig.-part-no.
63-UNI-12
Vertikutiermesser couteau broyeur / scarify knife
Y-Messer couteau-Y / Y-blade
10
45
0,210
Gewicht / poids / weight
41
Ø15,5x38 14
Ø14,5x35
96
5,5
85
8
3
50
36
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
47
30
0,199
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
0,050
36
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! 12.12 La référence d´origine présentée ci-dessus ne sert qu´à la coordination! The original part-numbers are only indicated for comparison!
0,120
Gruppe 3 Seite 205 groupe/section 3 page 205
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
Ø14x33
100
Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding
40
Y-Messer couteau-Y / Y-blade
100
Y-Messer couteau-Y / Y-blade
63-UNI-03
95
63-UNI-01
Universalmesser Couteaux universels All-purpose blades
63-UNI-18
Haltebügel étrier de retenue / holding shackle
63-UNI-19
Mähmesser
couteau de coupe / mower knife
Vertikutiermesser couteau broyeur / scarify knife Ø10x17
Ø10x14
Ø10
79
18 83
90
3
3
M10 34
33
30
Orig.-Nr. / réf. origine / orig.-part-no.
0,077
63-UNI-20
0,054
Gewicht / poids / weight
63-UNI-21
Flügelmesser - rechts
couteau ailé - droite / wing-knife right
Orig.-Nr. / réf. origine / orig.-part-no.
Flügelmesser - links
couteau ailé - gauche / wing-knife left
Vertikutiermesser couteau broyeur / scarify knife
Ø10x17
85
Ø8x10,5
90
90
0,055
Gewicht / poids / weight
63-UNI-24
Ø10x17
3 3
3
30
Orig.-Nr. / réf. origine / orig.-part-no.
0,062
Gewicht / poids / weight
63-UNI-22
30
30
Orig.-Nr. / réf. origine / orig.-part-no.
0,062
Gewicht / poids / weight
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
63-UNI-23
®
Flügelmesser - rechts
couteau ailé - droite / wing-knife right
Flügelmesser - links
couteau ailé - gauche / wing-knife left
Ø10x17
60
Ø10x17
60
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
Gewicht / poids / weight
Orig.-Nr. / réf. origine / orig.-part-no.
3
3 30
30
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
0,044
Orig.-Nr. / réf. origine / orig.-part-no. Gewicht / poids / weight
0,044
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! Gruppe 3 Seite 206 La référence d´origine présentée ci-dessus ne sert qu´à la coordination!
groupe/section 3 page 206
The original part-numbers are only indicated for comparison!
0,052
Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved
63-UNI-17
12.12
Universalmesser Couteaux universels All-purpose blades
Wirtschaftlich
63-UNI-10
Bestandsreduzierung auf allen Ebenen: - Händler, die schon einen hohen Lagerbestand haben - Lohnwerker, die Ihre Liquidität verbessern wollen - Verwaltungen, die die öffentlichen Ausgaben reduzieren wollen
Y-Messer couteau-Y / Y-blade
Ø14,5x33 8
98
Benutzerfreundlich 42
Gewicht / poids / weight
Dieser Artikel kann sowohl als Y-Messer, oder als Schlegel verwendet werden!
0,199
Cet article peut être utilisé comme couteau-Y ainsi que comme fléau! This item can be used as Y-knife or flail blade!
Montage Y-Messer
Diese Messern werden mit einem geraden Schäkel und einer Schraube mit Mutter befestigt. Das Gras wird auf der Länge der Schneide geschnitten.
Montage couteau-Y
Ces fléaux sont maintenus à l‘aide d‘une manille droite liée par un système vis et écrou. L‘herbe est coupée sur la longueur du tranchant du fléau.
Assembly of Y-blades
These blades are fixed with a straight schackle and a bolt and nut. The grass is cut at the lenght of the cutting edge.
®
Montage Schlegel
Dieser Schlegel wird mit einem gedrehten Schäkel und einer Schraube mit Mutter befestigt. Montage Cuiller
Ce fléau également maintenue à l‘aide d‘une manille torse liée par un système vis et écrou.
Vereinheitlichung von 2 Montage-Typen: - vermeidet Montagefehler und erhöht die Arbeitsproduktivität - verbessert deutlich die Schnittqualität: Die Schnittqualität der 8mm Messer ist dann (in den 2 Arbeitspositionen) vergleichbar mit der eines 5mm Messers Economique Réduction des stocks à tous les niveaux: - Concessionnaires qui ont déjà des stocks importants de pièces et de matériels. - Entrepreneurs travaux agricoles, soucieux d‘améliorer leur trésorerie. - Administrations qui sont dans une phase de maîtrise de la dépense publique. Interchangeabilité du fléau.
Confort de l‘utilisateur Standardisation de deux montages principaux: - Evite les erreurs de montage et donc augmente l‘efficacité au travail. - Améliore nettement la qualité de coupe des couteaux d‘épaisseur 8mm, dans les deux positions de travail, comparable à celle d‘un couteau d‘épaisseur 5mm.
Economical Stock reduction at all levels: - dealers with a high stock level - Workers who want to improve their liquidity - administrations who want to reduce public costs
User-friendly Unification of 2 assembly-types: - avoids assembly errors and increases productivity - increases clearly the cutting quality : the cutting quality of the 8 mm blades is comparable with the 5mm blades (in the 2 working positions)
Assembly of flails
These flails are fixed with a turned schackle and a bolt and nut
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! 12.12 La référence d´origine présentée ci-dessus ne sert qu´à la coordination! The original part-numbers are only indicated for comparison!
Gruppe 3 Seite 207 groupe/section 3 page 207
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding
36
Universalmesser Couteaux universels All-purpose blades
Schnell-Wechsel-System
63-UNI-16
45
6,5
Ø16x39
100
8
39
50
0,210
Austausch in einem Handgriff! 75% Zeitgewinn (für einen Rotor mit 60 Schlegel) Economique! suppression de l‘entretoise gain de temps dû à la rapidité du changement des fléaux
63-UNI-14
Schäkel manille / shackle
30
Benutzerfreundlich! einheitliche Auswechslung einfacher Eingriff vor Ort ohne spezielles Werkzeug
Confort de l‘utilisateur! changement unitaire intervention facile sur le terrain sans outillage spécifique
79
7 74
Ø11
55
Un changement en un tour de main! 75% de temps gagné (pour un rotor de 60 couteaux) Economical! No bushes anymore Gain in time when changing flails
Ø14,5
0,330
Gewicht / poids / weight
User-friendly! uniform exchange simple operation on the spot without any special tools Exchange in one grip! 75% gain in time (for 1 rotor with 62 flails)
63-UNI-15
Schäkel manille / shackle
®
30
55
79
7 74
Ø14
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
Gewicht / poids / weight
Wirtschaftlich! keine Buchse mehr Zeitgewinn beim Wechsel der Schlegel
Ø14,5
Gewicht / poids / weight
0,320
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! Gruppe 3 Seite 208 La référence d´origine présentée ci-dessus ne sert qu´à la coordination!
groupe/section 3 page 208
The original part-numbers are only indicated for comparison!
Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved
Système à échange rapide Quick-Change-System
Y-Messer couteau-Y / Y-blade
12.12
Halter
Chapes à souder Slides
63-RM-922
63-RM-921
63-RM-913 Ø16,5
50 Ø16,5
28
81 50
passend für: adaptable pour: to fit as:
Agricom
Orig.-Nr. / réf. origine / orig.-part-no.
17,5mm 0,292
Dicke / épaisseur / thickness Gewicht / poids / weight
63-RM-914
passend für: adaptable pour: to fit as:
Agricom
Orig.-Nr. / réf. origine / orig.-part-no. Dicke / épaisseur / thickness Gewicht / poids / weight
17,5mm 0,285
63-RM-911
passend für: Berti adaptable pour: M.E.A.A.T to fit as: Orig.-Nr. / réf. origine / orig.-part-no. Dicke / épaisseur / thickness Gewicht / poids / weight
63-RM-912 Ø21
Ø21
52
52
passend für: adaptable pour: to fit as:
passend für: Berti adaptable pour: to fit as: M.E.A.A.T Orig.-Nr. / réf. origine / orig.-part-no.
18,5mm 0,326
Dicke / épaisseur / thickness Gewicht / poids / weight
63-HAL-01
60
60
29,5
81
29,5
28
27
30
50 Ø16,5
18,5mm 0,353
Desvoys
Orig.-Nr. / réf. origine / orig.-part-no. Dicke / épaisseur / thickness Gewicht / poids / weight
19mm 0,324
passend für: adaptable pour: to fit as:
Desvoys
Orig.-Nr. / réf. origine / orig.-part-no. Dicke / épaisseur / thickness Gewicht / poids / weight
19mm 0,313
® Ø25 Ø11
57 50
77
passend für: Kuhn - Nobili adaptable pour: to fit as: Vogel & Noot Orig.-Nr. / réf. origine / orig.-part-no.
Gewicht / poids / weight
0,530
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! 12.12 La référence d´origine présentée ci-dessus ne sert qu´à la coordination! The original part-numbers are only indicated for comparison!
Gruppe 3 Seite 209 groupe/section 3 page 209
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
50
70
Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding
28
28
56
56
25
Ø16,5
Halter
Chapes à souder Slides
63-RM-919
63-RM-920
63-ROU-81 Ø16,5
Ø11
Nobili
Orig.-Nr. / réf. origine / orig.-part-no.
18,5mm 0,310
Dicke / épaisseur / thickness Gewicht / poids / weight
63-RM-916
passend für: adaptable pour: to fit as:
Nobili
Orig.-Nr. / réf. origine / orig.-part-no. Dicke / épaisseur / thickness Gewicht / poids / weight
18,5mm 0,292
63-RM-915
Ø20,5
passend für: adaptable pour: to fit as:
Rousseau
Orig.-Nr. / réf. origine / orig.-part-no.
5.105.20
10mm 0,120
Dicke / épaisseur / thickness Gewicht / poids / weight
63-RM-918 Ø16,5
50
passend für: adaptable pour: to fit as:
passend für: adaptable pour: to fit as:
Orig.-Nr. / réf. origine / orig.-part-no.
18mm 0,261
Dicke / épaisseur / thickness Gewicht / poids / weight
52
passend für: adaptable pour: to fit as:
Sicma
Orig.-Nr. / réf. origine / orig.-part-no. Dicke / épaisseur / thickness Gewicht / poids / weight
18mm 0,226
Sicma
Orig.-Nr. / réf. origine / orig.-part-no. Dicke / épaisseur / thickness Gewicht / poids / weight
®
31
61
25
Ø16,5
61
50
Sicma
63-RM-917
31
25
25
53
53
30
Ø20,5
52
passend für: adaptable pour: to fit as:
Sicma
Orig.-Nr. / réf. origine / orig.-part-no. Dicke / épaisseur / thickness Gewicht / poids / weight
18mm 0,331
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! Gruppe 3 Seite 210 La référence d´origine présentée ci-dessus ne sert qu´à la coordination!
groupe/section 3 page 210
The original part-numbers are only indicated for comparison!
18mm 0,344
Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved
passend für: adaptable pour: to fit as:
40
49
52
52
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
26
26
26
54
54
25
Ø16,5
12.12
Halter
Chapes à souder Slides
63-RM-901
63-RM-900
63-RM-905 Ø16,5
Ø16,5
Gewicht / poids / weight
17mm 0,260
63-RM-904
31 50
Orig.-Nr. / réf. origine / orig.-part-no.
17mm 0,230
Dicke / épaisseur / thickness Gewicht / poids / weight
63-RM-903
Orig.-Nr. / réf. origine / orig.-part-no. Dicke / épaisseur / thickness Gewicht / poids / weight
63-RM-902 Ø18,5
Ø18,5
Orig.-Nr. / réf. origine / orig.-part-no. Dicke / épaisseur / thickness Gewicht / poids / weight
17mm 0,300
55
50
19
19
17
50
31
31
31
55
55
25
28
Ø16,5
17mm 0,320
Orig.-Nr. / réf. origine / orig.-part-no. Dicke / épaisseur / thickness Gewicht / poids / weight
19mm 0,310
50
Orig.-Nr. / réf. origine / orig.-part-no. Dicke / épaisseur / thickness Gewicht / poids / weight
19mm 0,290
®
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! 12.12 La référence d´origine présentée ci-dessus ne sert qu´à la coordination! The original part-numbers are only indicated for comparison!
Gruppe 3 Seite 211 groupe/section 3 page 211
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
Dicke / épaisseur / thickness
55
52 24
52 24 Orig.-Nr. / réf. origine / orig.-part-no.
54
17
54
17
17
Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding
25
Ø16,5
Schlegelübersicht Tableau des fléaux Flails summary
B
ØD
B
ØD
ØD
S
S
B
63-GIM-01 63-FEI-55 63-SIC-11 63-CEL-29 63-NOB-17 63-NOB-34 63-ZZZ-04 63-BEM-05 63-NOB-38 63-ZZZ-08 63-MAS-58 63-IND-189 63-BRT-14 63-RIV-52 63-MAL-21 63-CEL-26 63-ZAP-09 63-SEK-03 63-TIE-01 63-FEI-09 63-FEI-12 63-FEI-33 63-FEI-52 63-SIC-04 63-PEG-36 63-ZZZ-44 63-BRT-03 63-ZAP-10 63-AGM-02 63-NOB-04 63-BRE-20 63-UGE-53 63-HER-13R 63-HER-13L 63-HER-14R 63-HYM-03 63-HYM-04 63-PRO-04 63-PRO-03
S
ØD
L
35 40 40 40 40 40 40 40 45 45 45 50 50 50 50 50 50 60 60 60 60 60 60 60 60 60 60 60 60 60 60 65 70 ® 70 70
7 6 6 8 8 8 15 15 8 8 8 6 8 8 10 10 10 7 7 8 8 8 8 8 8 8 8 10 10 10 10 6 10 10 10
17 12,5 16,5 16,5 16,5 16,5 19,5 16,5 16,5 16,5 16,5 20 25,5 25,5 16,5 17 20,5 25,5 25,5 25,5 25,5 25,5 25,5 25,5 25,5 25,5 28,5 20,5 25,5 25,5 25,5 29 35 35 35
170 130 136 115 132 235 108 115 125 130 135 245 113 200 200 120 185 205 212 250 230 150 150 195 205 210 205 120 150 204 210 220 150 150 195
80 80 80 80
13 13 13 13
24,5 24,5 30 30
265 345 300 330
Best. Nr.: réf. article part-no.
B S
63-SM-04 63-FEI-58 63-FEI-49 63-HYM-11
40 40 40 40
L
ØD
5 14x30 6 14x30 6 16,5x34 6 16,5x34,5
81 80 104 113
B
ØD S
B
63-AGR-52 63-FIS-500 63-AGT-90 63-PRZ-01 63-IND-139 63-ISE-98 63-ISE-99 63-ZZZ-06 63-PRO-06 63-NOB-35 63-SMA-54 63-BOM-57 63-BER-52 63-ROU-51 63-BER-51 63-HER-01 63-MAL-24 63-MOT-54 63-MUL-53 63-ROU-53 63-SM-01 63-SMA-51 63-UNI-01 63-FEI-57 63-SIC-10 63-ZZZ-31 63-HOW-51 63-UNI-03 63-GIM-03
S
ØD
B
S
ØD
L
H
63-IND-416 63-AED-10 63-TRR-01 63-ZZZ-38 63-SIC-13 63-PAL-09 63-SIC-01 63-SIC-03 63-TRR-02 63-FEI-03 63-BRT-13 63-AGM-13 63-NOB-06 63-IND-71
35 40 45 50 50 50 60 60 60 60 60 60 60 61
5 10 8 10 10 10 8 8 8 8 8 10 10 8
14 16,5 16,5 16,5 16,5 18,5 25,5 25,5 25,5 25,5 29 25,5 25,5 20,5
113 112 130 105 120 102 120 195 210 250 198 145 200 122
47 68 52 73 68 73 67 57 60 75 70 50 50 56
B
H
Best. Nr.: réf. article part-no.
Best. Nr.: réf. article part-no.
ØD
L
H
30 2,5 10x2 70 20 30 2,5 10x20 76 19 30 3 11x20 78 35 30 4 14x29 103 25 30 4 14x30 90 25 Best. Nr.: 30 4 13x27 102 28 réf. article 30 4 13x27 105 20 part-no. 30 5 11,5x23 95 36 30 5 14x30 80 42 63-FEI-13 35 6 14x30 90 44 63-FEI-15 35 8 14,5x35 98 48 63-FEI-46 35 8 14,5x35 113 41 63-ZZZ-02 63-HYM-01 36 8 14,5x35 97 45 63-FEI-47 37 8 14x35 95 40 63-SMA-56 40 5 14x33 100 39 63-SMA-57 40 5 10,5x23 95 42 63-UNI-04 40 5 13x26 80 37 63-SMA-55 40 5 13x27 82 36 63-ZZZ-11 40 5 13x27 100 31 63-ORS-06 40 5 14x35 100 40 63-UNI-06 40 5 14x30 82 42 63-UNI-12 40 5 13x26 84 31 63-BOM-53 40 5 14x33 95 34 63-UNI-02 40 6 14x30 82 42 63-SPH-51 40 6 14x30 90 43 63-MOT-56 40 6 17x34 105 53 63-MOT-55 40 6 18x30 83 32 63-SPI-04 40 7 15x34 100 38 63-UNI-09 40 7 18x36 115 51 63-UNI-05 63-SMA-52
S L
Best. Nr.: réf. article part-no.
L
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
H
H
B
S
The original part-numbers are only indicated for comparison!
L
H
40 8 14x29 85 43 40 8 14x29 105 43 40 8 14x30 86 43 40 8 14x30 107 43 40 8 14x30 114 42 40 8 14x35 100 44 40 8 15x40 98 42 40 8 15x40 98 46 40 8 16x30 98 44 40 8 16x32 90 43 40 8 17x35 94 43 40 8 16,5x34 98 43 40 8 16x41 95 41 41 5,5 14,5x35 96 36 41 6 15,5x40 95 33 41 6 14,5x34 96 36 41 8 15x39 83 39 45 3 12x26 87 32 45 6 14x30 100 44 45 6 20x34,5 85 37 45 8 15,5x38 100 36 45 8 16x38 100 40 50 6 15x34 91 40
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! Gruppe 3 Seite 212 La référence d´origine présentée ci-dessus ne sert qu´à la coordination!
groupe/section 3 page 212
ØD
Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved
L
L
S
L
B
12.12
Schlegelübersicht Tableau des fléaux Flails summary
B
B ØD
ØD
ØD S
S
H
Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding
L
L
L
S
H
H
Best. Nr.: réf. article part-no.
B
S
ØD
L
H
63-BCS-20 63-BOM-65 63-ZAP-12 63-AGM-04 63-AGM-21 63-DOP-51 63-STE-02 63-PAL-06 63-CRN-01 63-MAL-15 63-IND-188 63-ROU-54 63-DRG-09 63-FEI-54 63-CAR-52 63-ZAP-13 63-PRO-02 63-DÜC-02 63-FLN-02 63-FEI-34 63-FEI-45 63-NOB-41 63-NOB-02 63-NOB-10 63-NOB-16 63-SIM-15 63-CAE-13 63-ZZZ-17 63-AGM-03 63-ORS-12 63-CLE-01 63-AGM-29 63-MAL-29 63-MAL-30 63-AED-08 63-BRE-18 63-TIE-08 63-BRE-21 63-DRG-04 63-IND-09 63-MAL-27 63-TIE-05
30 31 35 35 35 35 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40
4 3 4 5 5 6 4 5 5 5 5 5 5 6 6 6 6 6 8 8 8 8 8 8 8 8 8 8 8 8 8 10 10 10 ® 10 10 10 10 10 10 10 10
12,5 10,5 10,5 14,5 14,5 20 10 12,5 12,5 14,5 14,5 15 16,5 12,5 13 14,5 16 18 16,5 16,5 16,5 16,5 16,5 16,5 16,5 16,5 20,5 20,5 20,5 20,5 22,5 14 14,5 16,5 16,5 16,5 16,5 16,5 16,5 16,5 16,5 16,5
100 110 98 114 80 63 90 100 124 138 140 132 100 130 93 105 125 95 115 126 130 130 175 180 130 110 110 119 120 150 110 105 131 135 135 125 125 110 110 105 135 135
37 18 42 42 42 30 25 43 39 40 53 43 41 40 37 42 50 36 51 60 40 41 60 42 42 50 53 53 52 39 73 53 41 41 53 54 72 52 38 38 42 42
63-ZZZ-37 63-ZZZ-13 63-DRG-05 63-SIM-14 63-MEA-11 63-BEM-04 63-ZZZ-03
40 40 40 40 40 40 40
10 10 10 10 10 12 12
17,5 18,5 18,5 20 20,5 16,5 19,5
105 100 110 110 130 112 108
29 27 38 54 45 50 48
Best. Nr.: réf. article part-no.
B
S
ØD
L
H
63-BRN-02 63-NOB-27 63-MAS-55 63-MEA-03 63-HUM-01 63-CON-52 63-FEI-60 63-HUM-02 63-DRG-07 63-DRG-11 63-CAE-05 63-IND-46 63-CSM-03 63-HYM-02 63-BRT-07 63-RIV-51 63-MEA-10
45 45 45 45 50 50 50 50 50 50 50 50 50 50 50 50 50
5 8 8 10 6 6 8 8 8 8 8 8 8 8 8 8 10
20,5 16,5 16,5 16,2 16,5 27 16 16,5 18 18,5 20 20,5 20,5 20,5 25,5 25,5 16,5
150 125 136 115 135 143 130 135 135 140 100 120 145 156 108 220 105
42 56 56 40 46 50 42 46 84 72 92 53 38 41 68 50 72
63-HER-02 63-AGC-13 63-CEL-25 63-SIC-12 63-MAL-14 63-MEA-02 63-LAG-08 63-MAS-70 63-NOB-12 63-ZAP-08 63-HOW-48 63-HOW-49 63-ZZZ-36 63-OMA-06 63-PRO-01 63-LAG-05 63-IND-147 63-SEK-02 63-TIE-03 63-AGC-09 63-CAE-06 63-SAU-01 63-CAE-04 63-IND-69 63-IND-103 63-AGC-08 63-ORS-01 63-JOH-04 63-IND-153 63-TOR-21 63-TOR-20 63-IND-99 63-FEI-29
50 50 50 50 50 50 50 50 50 50 50 50 50 50 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60
10 10 10 10 10 10 10 10 10 10 10 10 10 10 6 6 6 7 7 7 7 7 7 7 7 8 8 8 8 8 8 8 8
16,5 16,5 16,5 16,5 16,5 18,5 18,5 20,5 20,5 20,5 25,5 25,5 25,5 25,5 25,5 25,5 30 25,5 25,5 25,5 28,5 28,5 28,5 30 30 16,5 16,5 19,5 20,5 22,5 22,5 22,5 25,5
118 122 125 125 190 125 150 115 130 180 100 120 127 140 140 213 175 210 212 215 155 212 230 190 200 130 140 128 150 100 125 105 120
72 60 53 70 58 72 44 61 55 62 60 60 64 55 58 55 58 46 56 45 57 43 57 33 53 59 60 58 65 50 50 66 43
Best. Nr.: réf. article part-no.
B
S ØD
63-FEI-30 63-ZZZ-16 63-FEI-04 63-TOR-20 63-IND-94 63-FEI-38 63-ZZZ-40 63-SAU-04 63-IND-07 63-SPI-03 63-PER-01 63-VIG-03 63-IND-944 63-PEG-35 63-SIC-02 63-SIM-12 63-SOV-51 63-MAS-54 63-WER-02 63-ORS-10 63-FEI-05 63-FEI-02 63-LAG-02 63-ORS-05 63-FEI-51 63-SIM-22 63-ZZZ-27 63-ZZZ-32 63-SAU-03 63-BER-01 63-BRT-06 63-FAN-01 63-IND-130 63-SAU-01 63-ZZZ-29 63-ZAP-03 63-ZAP-01 63-QVG-01 63-ZZZ-43 63-AGM-01 63-TOR-17 63-BRE-37 63-TOR-16 63-NOB-05 63-BRE-17 63-TIE-04 63-BRT-04 63-UGE-52 63-TAA-02
60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 65 65
8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 10 10 10 10 10 10 10 10 10 10 10 10 6 7
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! 12.12 La référence d´origine présentée ci-dessus ne sert qu´à la coordination! The original part-numbers are only indicated for comparison!
25,5 25,5 25,5 22,5 25,5 25,5 25,5 25,5 25,5 25,5 25,5 25,5 25,5 25,5 25,5 25,5 25,5 25,5 25,5 25,5 25,5 25,5 25,5 26 26 26 26 26,5 28,5 28,5 28,5 28,5 28,5 29,5 30 20,5 20,5 25,5 25,5 25,5 25,5 25,5 25,5 25,5 25,5 25,5 28,5 29 29
L
H
120 64 120 70 145 59 125 50 125 63 143 60 147 51 150 60 150 65 182 56 190 84 200 90 202 62 204 50 204 55 204 55 204 55 210 65 215 62 225 107 240 65 245 80 250 64 141 45 145 50 145 60 210 65 155 48 145 70 193 52 205 48 225 60 225 62 212 43 230 55 120 70 150 60 125 57 120 66 150 60 160 72 173 55 187 72 204 57 210 69 214 56 205 49 215 54 215 46
Gruppe 3 Seite 213 groupe/section 3 page 213
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
B
Befestigungselemente Éléments de fixation Fastening elements
Schrauben mit Sicherungsmuttern boulons avec écrous à freinage interne bolts with self-locking nuts
Gewinde filet thread
Güte Gewicht qualité poids quality weight
L
G
63-830 63-835 63-840 63-850 63-855-1 63-855
30 35 40 50 50 55
13 23 22 22 17 23
M8x1,25 M8x1,25 M8x1,25 M8x1,25 M8x1,25 M8x1,25
10.9 8.8 8.8 8.8 10.9 8.8
0,022 0,018 0,020 0,030 0,030 0,035
63-1035 63-1060 63-1065 63-1065-1 63-1070-1 63-VOT-91 63-1085 63-1090
35 60 65 65 70 75 85 90
35 27 18 28 28 24 32 30
M10x1,5 M10x1,5 M10x1,5 M10x1,5 M10x1,5 M10x1,5 M10x1,5 M10x1,5
8.8 8.8 10.9 10.9 10.9 12.9 10.9 10.9
0,030 0,060 0,110 0,060 0,060 0,065 0,075 0,080
63-1225 63-1230 63-1240 63-1245 63-1245-1 63-UNI-900 63-1250-1 63-1260-1 63-1265-1 63-1265-2 63-1270-1 63-1273 63-1280 63-1280-1 63-DÜC-903 63-1287 63-1290 63-1291 63-12100 63-12100-1 63-PER-91
25 30 40 45 45 47 50 60 65 65 70 73 80 80 80 87 90 90 ® 100 100 60
25 30 40 30 23 27 32 32 32 32 35 21 33 32 24 20 32 32 32 33 16
M12x1,75 M12x1,75 M12x1,75 M12x1,75 M12x1,75 M12x1,75 M12x1,75 M12x1,75 M12x1,75 M12x1,75 M12x1,75 M12x1,75 M12x1,75 M12x1,75 M12x1,75 M12x1,75 M12x1,75 M12x1,75 M12x1,75 M12x1,75 M12x1,25
8.8 8.8 8.8 10.9 10.9 10.9 10.9 10.9 10.9 12.9 10.9 10.9 8.8 10.9 10.9 8.8 8.8 12.9 8.8 10.9 10.9
0,050 0,050 0,060 0,065 0,065 0,068 0,070 0,080 0,085 0,090 0,090 0,090 0,100 0,100 0,100 0,110 0,106 0,115 0,120 0,114 0,083
63-1450 63-BRN-902 63-TUR-91 63-14115 63-14120 63-14140 63-BOM-92
50 65 90 105 120 140 96
34 21 20 17 37 45 17
M14x2 M14x2 M14x2 M14x1,5 M14x2 M14x2 M14x1,5
12.9 10.9 12.9 10.9 8.8 10.9 10.9
0,100 0,122 0,150 0,176 0,180 0,210 0,180
Best. Nr.: réf. article part-no.
Gewinde filet thread
Güte Gewicht qualité poids quality weight
L
G
63-1660 63-1670 63-1680 63-1690 63-16100 63-BUL-56 63-BUL-41 63-16115 63-16120 63-16124 63-16130 63-16132 63-16140 63-16200
60 70 80 90 100 110 100 115 120 124 130 130 140 200
40 40 40 40 40 41 41 25 40 34 50 28 50 48
M16x2 M16x2 M16x2 M16x2 M16x2 M16x1,5 M16x1,5 M16x1,5 M16x1,5 M16x2 M16x2 M16x2 M16x2 M16x2
10.9 10.9 10.9 10.9 10.9 10.9 10.9 8.8 10.9 8.8 10.9 10.9 8.8 8.8
0,150 0,160 0,170 0,200 0,210 0,220 0,230 0,250 0,244 0,220 0,260 0,260 0,270 0,360
63-1875 63-18100 63-18130
75 100 130
45 47 53
M18x2,5 M18x1,5 M18x2,5
8.8 10.9 10.9
0,190 0,290 0,330
63-2080 63-2090 63-2091 63-20110 63-20120 63-20140 63-20141 63-20150 63-20151 63-20160
80 90 90 110 120 140 140 150 150 160
55 53 53 50 50 55 35 50 33 55
M20x1,5 M20x2,5 M20x2,5 M20x2,5 M20x2,5 M20x2,5 M20x2,5 M20x2,5 M20x2,5 M20x2,5
10.9 8.8 10.9 8.8 10.9 10.9 10.9 10.9 10.9 10.9
0,310 0,330 0,360 0,380 0,410 0,440 0,450 0,484 0,484 0,506
63-1264 63-EPO-83 63-TAA-91 63-TAA-92 63-TAA-93 63-12133
64 61 43 30 52 133
32 20 22 22 26 35
1/2“ UNF 1/2“ UNF 1/2“ UNF 1/2“ UNF 1/2“ UNF 1/2“ UNF
8.8 10.9 12.9 12.9 12.9 8.8
0,090 0,075 0,070 0,060 0,080 0,135
63-51632 63-51638
32 38
11 22
5/16“ UNF 5/16“ UNF
8.8 8.8
0,020 0,024
63-1684
84
21
5/8“ UNF
10.9
0,185
33 63 63,5 80 82 84
20 30 20 19 17 19
7/16“ UNF 7/16“ UNF 7/16“ UNF 7/16“ UNF 7/16“ UNF 7/16“ UNF
12.9 8.8 10.9 10.9 10.9 10.9
0,050 0,060 0,060 0,078 0,080 0,080
95
24
3/8“ UNF
8.8
0,070
63-716114 63-FEI-91 63-71621210 63-71680 63-71682 63-71684 63-3895
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! Gruppe 3 Seite 214 La référence d´origine présentée ci-dessus ne sert qu´à la coordination!
groupe/section 3 page 214
The original part-numbers are only indicated for comparison!
Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
Best. Nr.: réf. article part-no.
G
G
L
L
Schrauben mit Sicherungsmuttern boulons avec écrous à freinage interne bolts with self-locking nuts
12.12
Befestigungselemente Éléments de fixation Fastening elements
63-VIG-900
Schrauben mit Quetschmuttern boulons avec écrous bolts with squeeze nuts
63-KUH-904
Schraube - 10.9 boulon - 10.9 bolt - 10.9 L
Bolzen piton / bolt
55
0,170
Gewicht/poids/weight
63-GLB-901
7
M16x1,5
M20x2,5
Gewicht/poids/weight
63-KUH-901
0,300
Selbstsichernde Sechskantmutter écrou hexagonal à freinage interne self-locking hexagon nut
Kronenmutter M20x1,5 écrou à créneaux dégagés hexagon castle nut
22
M20x2,5
0,180
Gewicht/poids/weight
63-SEP-92
24
71,5 65
Gewicht/poids/weight
Bolzen piton / bolt
15,5
Ø16
33,5
Ø6
Gewicht/poids/weight
0,050
63-SCH-93
0,028
37
M27x2
78 92
Ø28 Ø38
Bolzen für die Montage mit 2 Messern piton pour montage avec 2 couteaux pin for assembling with 2 blades
Ø60
Güte / qualité / quality Gewicht / poids / weight
Gewicht/poids/weight
0,130
63-SCH-92
64
Bolzen für die Montage mit 1 Messer piton pour montage avec 1 couteau pin for assembling with 1 blade
Gewicht/poids/weight
M27x2 Ø28
90 102
0,060
39
®
66
Gewicht/poids/weight
0,330
63-AGO-63
Mutter écrou nut
M16x1,5 22
30
M18x1,5
Ø38
Ø60
10.9 0,720
Güte / qualité / quality Gewicht / poids / weight
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! 12.12 La référence d´origine présentée ci-dessus ne sert qu´à la coordination! The original part-numbers are only indicated for comparison!
10.9 0,800
Gruppe 3 Seite 215 groupe/section 3 page 215
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
M20x1,5
32
24
Ø2
9
Schraube - 10.9 boulon - 10.9 bolt - 10.9
26,5
5
49
Ø4,5
63-HYM-900
Schraube - 10.9 boulon - 10.9 bolt - 10.9
75
0,460
Gewicht/poids/weight
77
54
0,518
Gewicht/poids/weight
63-SEP-91
Bolzen piton bolt
46
Ø4 M20x1,5
24
0,030 0,176 0,220 0,440
63-KUH-900
Schraube - 10.9 boulon - 10.9 bolt - 10.9
4,5
10.9 10.9 10.9 10.9
62,5
63-GLB-900
M8x1,25 M14x1,5 M16x2 M20x2,5
Ø25
70,5
23 17 28 55
Ø16
40
55 105 100 130
25
22
63-855 63-14115 63-16101 63-20130
G
Güte Gewicht qualité poids quality weight
90
L
Gewinde filet thread
49
Best. Nr.: réf. article part-no.
79
33,5
Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding
G
6
Befestigungselemente Éléments de fixation Fastening elements 63-HUM-93
63-16115-1 Messerschraube mit Kronenmutter boulon pour couteau avec écrou à créneaux dégagés blade bolt with hexagon castle nut 27
M20x1,5
35 22
36,5
0,270
63-ROU-82 63-ROU-83
,5
Gewicht / poids / weight
57,5
12.9
Güte / qualité / quality
0,395
Gewicht / poids / weight
63-16115-2
63-HUM-95
Schrauben-Satz M16x1,5 ensemble visserie kit
Messerschraube mit Sicherungsmutter - Gedrückt boulon pour couteau avec écrou à freinage interne - embouti blade bolt with self-locking nut - pressed 23,7
21 40
Gewicht / poids / weight
0,20
16
63-16115 63-ROU-63
27
M16x2
44
4
63-ROU-83
62
10.9
Güte / qualité / quality
63-HUM-94
0,395
Gewicht / poids / weight
63-AGM-501 Schraube mit Sicherungsmutter - 8.8 boulon avec écrou à freinage interne - 8.8 bolt with self-locking nut - 8.8
Messerschraube mit Kronenmutter boulon pour couteau avec écrou à créneaux dégagés blade bolt with hexagon castle nut
0,180
30,5 37 43
132
14
53
M20x2,5
60
5
18,5
24 27
Ø20
35 21
26,5 Gewicht / poids / weight®
25
M16x1,5
6
30
Ø4
12.9
Güte / qualité / quality
63-2035
0,450
Gewicht / poids / weight
63-HUM-91 Schraube mit Sicherungsmutter - 8.8 boulon avec écrou à freinage interne - 8.8 bolt with self-locking nut - 8.8
31
Gewicht / poids / weight
0,270
36 47 57
25
4
12.9
Gewicht / poids / weight
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! Gruppe 3 Seite 216 La référence d´origine présentée ci-dessus ne sert qu´à la coordination!
groupe/section 3 page 216
M16x2
115
Ø5,5
Güte / qualité / quality
40
21,5
34
M20x1,5
Messerschraube mit Kronenmutter boulon pour couteau avec écrou à créneaux dégagés blade bolt with hexagon castle nut Ø28 10 30 28 5 39,5
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
63-16115
63-ROU-61
Ø4
47,5
26,5
21,5
28 5
The original part-numbers are only indicated for comparison!
0,260
Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved
+ 0,2
34
Ø24
10
Schrauben-Satz M16x1,5 ensemble visserie kit
12.12
Befestigungselemente Éléments de fixation Fastening elements
63-HUM-92
63-WIL-52
Schraube mit Sicherungsmutter - 8.8 boulon avec écrou à freinage interne - 8.8 bolt with self-locking nut - 8.8
Schraube mit Sicherungsmutter - 10.9 boulon avec écrou à freinage interne - 10.9 bolt with self-locking nut - 10.9
Schraube mit Sicherungsgewinde - 8.8 boulon avec filet à freinage interne - 8.8 bolt with self-locking thread - 8.8
14
40
159 33
115
M14x1,5
25
M20x2,5
63
25
35
4
M20x2,5
0,460
Gewicht / poids / weight
63-JOS-93
63-AS-08
Messerschraube - M12x1,75 boulon - M12x1,75 blade bolt - M12x1,75
Schraube mit Sicherungsmutter - 10.9 boulon avec écrou à freinage interne - 10.9 bolt with self-locking nut - 10.9
30,5 16
33,5
7
0,075
Gewicht / poids / weight
63-16131
0,081
Gewicht / poids / weight
63-2475
Schraube - 12.9 boulon - 12.9 bolt - 12.9
0,053
51-1680R
Schraube - 8.8 boulon - 8.8 bolt - 8.8
Schraube - 12.9 boulon - 12.9 bolt - 12.9
47
Gewicht/poids/weight
63-HUM-97
0,260
16
Gewicht/poids/weight
Gewicht/poids/weight
63-1016
0,105
Selbstsichernde Sechskantmutter écrou hexagonal à freinage interne self-locking hexagon nut
M16x1,5
0,036
80
75
M16x1,5 40
®
Selbstsichernde Mutter - Gedrückt écrou à freinage interne - embouti self-locking nut - pressed M16x2
M24x3 37
M16x1,5
50
M16x2
37
130
15
Schraube - 10.9 boulon - 10.9 bolt - 10.9
5
Gewicht / poids / weight
63-1650
14
Ø25
12
20
Ø20,4
18
Ø30
64
M12x1,75
Messerschraube - M12x1,75 boulon - M12x1,75 blade bolt - M12x1,75
Gewicht/poids/weight
Gewicht/poids/weight
63-2475-1
Selbstsichernde Sechskantmutter écrou hexagonal à freinage interne self-locking hexagon nut M24x3
18
0,035
0,380
23,5
Gewicht/poids/weight
35
0,100
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! 12.12 La référence d´origine présentée ci-dessus ne sert qu´à la coordination! The original part-numbers are only indicated for comparison!
Gewicht/poids/weight
51-MU16-1
0,152
Selbstsichernde Sechskantmutter écrou hexagonal à freinage interne self-locking hexagon nut
M16x1,5
Gewicht/poids/weight
18,5
0,030
Gruppe 3 Seite 217 groupe/section 3 page 217
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
63-DOP-91
0,050
Gewicht / poids / weight
Ø19
0,300
Gewicht / poids / weight
50
Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding
63-1425
Schäkel Manilles Shackles
ØB
L
ØB
L A
H
H
A
L
H
ØD
ØB
A
Gewicht poids weight
25,5 37 33 34 39 48 48 26 40 40 47,5 44 49 52
45 47 47 54 41 52 52 40 66 54 76 52,5 57 54,5
7,5 10 10 10 8,5 11 11 8 11 11 13 11 13 13
8,3 10 10 12,5 9 11,5 12,5 8,5 12,5 12,5 15,5 11 16 15
10,5 17 15 14 21 26 26 10 18 18 22 22 22 23
0,040 0,070 0,090 0,200 0,050 0,110 0,125 0,058 0,140 0,120 0,230 0,130 0,195 0,225
63-AGR-71 63-HAN-71 63-HAN-73 63-MAL-25 63-AGT-91 63-MUL-71 63-ORS-02 63-ROU-73 63-DÜC-900 63-DÜC-901 63-BOM-73 63-HMF-06 63-YYY-73 63-YYY-76
Best. Nr.: réf. article part-no.
63-GIL-71 63-GIL-72 63-VOT-71 63-BOM-71
L
H
ØD
ØB
A
Gewicht poids weight
40 40 45 37
73 78 73 46
10 10 10 8
12,5 10,5 10 8
20 20 24 20
0,140 0,150 0,145 0,170
L A
ØB
L A
ØB
H
H
ØD
ØD
L
H
ØD
ØB
A
Gewicht poids weight
63-BOM-72 63-ROU-72 63-SMA-71 63-UNI-07 63-YYY-72 63-ORS-08 63-BOM-75 63-CAR-51 63-BOM-74 63-ORS-09 63-DUC-914
46 47 48 48 48 49 55 45 38 49 39
45 54 55 60 54 56 79 53 57 56 54
13,5 11 14 13 12 13 13 11 11 13 13
15 11 11 15,5 12,5 14,5 16,5 11 16,5 16,5 12,5
28 26 23 22 24 22,5 30 23,5 15,5 22,5 19
0,150 0,120 0,200 0,200 0,120 0,200 0,260 0,134 0,156 0,200 0,140
®
63-MUL-72
Best. Nr.: réf. article part-no.
63-GIL-73 63-HER-71 63-ROU-71 63-ROU-75 63-TUR-72 63-VOT-63 63-DÜC-905 63-FEI-50 63-HEM-92 63-YYY-74 63-YYY-75 63-MUL-74 63-TUR-73
63-TRR-03 48
11,4
Gewicht / poids / weight
H
ØD
ØB
A
Gewicht poids weight
48 33 48 24 48 43,5 39,5 48 44 48 46 49 49
65 79 66 42 73 67 67 47 83 63 63 80 73
11 11 11 7 13 11 11,5 11 13 11 11 12,5 13
12,5 12,5 11,5 8,5 14,5 11,5 12 12 13 11 13,5 13,5 11,5
26 11 26 10 23 21,5 17 26 18 26,5 25 23 23
0,140 0,180 0,150 0,050 0,230 0,150 0,140 0,145 0,250 0,137 0,120 0,240 0,210
63-EPO-73 41,5 22
38
Ø4,5
Ø11
0,150
37
Ø9
25,5
L
Gewicht / poids / weight
Ø10
Ø8
0,054
Gewicht / poids / weight
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! Gruppe 3 Seite 218 La référence d´origine présentée ci-dessus ne sert qu´à la coordination!
groupe/section 3 page 218
The original part-numbers are only indicated for comparison!
46
Best. Nr.: réf. article part-no.
75
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
Best. Nr.: réf. article part-no.
0,080
Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved
ØD
ØD
12.12
Schäkel Manilles Shackles
L A
ØB
L A
H
H
ØD
L
H
ØD
A
Gewicht poids weight
63-EPO-71 63-EPO-72 63-EPO-74 63-EPO-75 63-EPO-76
42 42 32 45 38
71 74 83 83 69
11 12 10 10 10
20 18 12 25 18
0,180 0,210 0,160 0,160 0,140
63-KUH-905
Best. Nr.: réf. article part-no.
L
H
ØD
ØB
A
Gewicht poids weight
63-SPH-93 63-BOM-76
45 35
50 60
13,5 13
20 25,5
20 15
0,200 0,200
63-VOT-73
63-TUR-71
37 16
43 23
77
13
80
53
Ø11,5
42 20
Ø10 Ø11
0,120
Gewicht / poids / weight
0,170
Gewicht / poids / weight
63-YYY-78
63-YYY-77
0,210
Gewicht / poids / weight
63-MUE-99
®
Ø1 3
Gewicht / poids / weight
0,165
Ø13
Ø10,5
Gewicht / poids / weight
45
32
63
48 7
Ø25
48 26
62
67,5
Ø13
72,5
0,158
Gewicht / poids / weight
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! 12.12 La référence d´origine présentée ci-dessus ne sert qu´à la coordination! The original part-numbers are only indicated for comparison!
1 Ø1
0,125
Gruppe 3 Seite 219 groupe/section 3 page 219
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
Best. Nr.: réf. article part-no.
16,5
Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding
ØD
Scheiben und Buchsen Rondelles et entretoises Washers and bushs
63-ROU-64 63-ROU-65 63-DRG-91 63-9001 63-MUL-85 63-MEA-16 63-VOT-61 63-SMA-61 63-ROU-62 63-BRN-03 63-DÜC-906 63-PER-61 63-ZZZ-18 63-ZZZ-19 63-DOP-61 63-FEI-18 63-DÜC-902 63-AGM-506 63-AGM-507 63-MEA-15 63-TUR-81 63-BOM-91 63-BOM-61 63-ZZZ-20 63-AGM-500 63-ROU-61 63-GIL-86
ØD
L
ØB
8,5 8,5 10 10,5 11 11,5 12 12 12 12,5 12,5 12,5 13 13 13 13 13,5 14,5 14,5 16 16 16 16 16 16 16 16
11 9 14,5 20 63 48 20 22 25 12 16 23 35 35 40 63,5 16,5 17 16 16 21 21,5 25,5 39 49 61 103
12 15 16 20 16 20 20 20 20 20 20 20 17,5 22 22 25 30 20 32 25 24 24 25 25 25 24 25
63-BOM-66
63-FIS-92 63-FEI-63 63-FEI-65 63-ZZZ-24 63-ZZZ-23 63-DÜC-907 63-BRE-01 63-PRO-07 63-IND-07-1 63-FEI-14 63-FEI-17 63-ZZZ-48 63-LAG-03 63-BAM-02 63-NIC-61 63-TAA-05 63-SPR-53 63-AGR-81 63-EPO-84 63-SAU-02 63-SAU-05 63-AGM-502 63-SOV-501 63-SPH-90 63-IND-62 63-KUH-902 63-SAU-06 63-IND-900
63-KUH-903
Spannbuchse entretoise de serrage / clamping bush
ØB
ØD
L
ØB
16,5 16,5 16,5 16,5 16,5 16,5 16,7 17 17 17 17 17 17 18 20 20 20 20,5 21 21 21 22 25 25,5 25,5 25,5 29 30,5
11 28 32,5 39,5 44 53 68 13 19 25 25 73 80 13 30 39 46 58 35 40 70 35 19 14 14 17 45 16
28 25 25 25 25 28 24,9 25 25 25 25 25 25 30 28 28 28 34 35 28 29 32 45 38 51 51 45 50
63-SAU-07
Buchse entretoise / bush
Buchse entretoise / bush Ø29
Ø40 Ø16,5
Ø21
11,5
® 19,8
63-PER-66
70
63-MUL-89
Spannbuchse entretoise de serrage / clamping bush Ø26,9 Ø21
Scheibe rondelle washer
63-AS-12 Scheibe rondelle / washer
Ø16,6 Ø10,5
2,5
19,8
Ø18 Ø12
werden paarweise geliefert livraison par paires are delivered at pairs
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! Gruppe 3 Seite 220 La référence d´origine présentée ci-dessus ne sert qu´à la coordination!
groupe/section 3 page 220
The original part-numbers are only indicated for comparison!
1,5
Ø26,9 Ø21
Best. Nr.: réf. article part-no.
ØD
Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved
Best. Nr.: réf. article part-no.
L
ØD
Ø28
L
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
Buchsen entretoises bushs
ØB
Buchsen entretoises bushs
12.12
Scheiben und Buchsen Rondelles et entretoises Washers and bushs
ØD Ød
Scheiben rondelles washers
ØB ØD
L
ØD
ØB
L
H
10,5 12,5 13 13 14 14,2 14,5 15,5 16,2 16,5 16,5 17 20
15 25 19 25,5 20,5 25,5 20 25,5 25 24 25,5 24 28
19 50 28,5 44,5 30 35 35 35 35 30 50 30 60
25,5 10 45 17,8 35 47,5 11 27 12 39 19,8 35 20
24 4 41,5 8,4 23,5 41 6 20 8 30 9,1 30 13
63-AGM-508
Best. Nr.: réf. article part-no.
63-MUL-86 63-AS-09 63-FEI-19 63-EPO-82 63-AGM-505 63-9000 63-AGM-503 63-DÜC-908 63-ROU-82 63-FEI-64 63-FIS-91 63-AS-10 63-1001 63-FEI-48 63-AGM-504 63-VIG-901 63-BRT-09
L
ØB
11 12,5 13 14 14,5 15 16,5 17 17 17 17 18,3 19 25 25,5 28 30
4 6 8 3 4 2,5 4 3 5 3 6 1,25 3 9,5 4 7 10
25 34,5 35 28 35 24 35 30 31,5 35 40 35,5 30 51 50 48 55
63-AGM-509
Innenbuchse entretoise interne / internal bush
Außenbuchse entretoise externe / external bush Ø25 Ø12,5
Ø25
12
49,5
Ø30
ØD
Ø35
0,210
Gewicht / poids / weight
4
63-BOM-62 63-IND-901 63-BOM-63 63-ZZZ-22 63-SPH-91 63-BOM-64 63-BRN-901 63-BOM-96 63-SOV-61 63-SCH-62 63-ZZZ-21 63-ROU-63 63-GIL-85
Ød
0,048
Gewicht / poids / weight
®
63-SPH-94
63-SPH-95 Innenbuchse entretoise interne / internal bush
20,5
Ø14
Ø30
34, 5
35
Gewicht / poids / weight
20,5
Ø20,5 Ø14
Ø19,6
Ø30
Innenbuchse entretoise interne / internal bush
0,080
Gewicht / poids / weight
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! 12.12 La référence d´origine présentée ci-dessus ne sert qu´à la coordination! The original part-numbers are only indicated for comparison!
0,080
Gruppe 3 Seite 221 groupe/section 3 page 221
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
ØB
Best. Nr.: réf. article part-no.
Ø12,5
Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding
L
H
Außenbuchse entretoise externe external bush
Scheiben und Buchsen Rondelles et entretoises Washers and bushs 63-IND-902
63-MUL-63
Innenbuchse entretoise interne / internal bush
Aluminium buchse entretoise en aluminium / aluminium bush
Ø20
Buchse entretoise / bush 58
6
Ø20,5
Ø35
63-PER-63
Scheibe mit versenkter Bohrung rondelle à alésage fraisé countersunk hole washer
63-PER-62
Stützscheibe rondelle / washer
Sicherungsring bague de sécurité / safety ring
41
7
63-PER-64
Ø20,5
63-PER-65
Spannbuchse entretoise de serrage / clamping bush
Spannbuchse entretoise de serrage / clamping bush 15
Buchse entretoise bush
Ø50,7
63-UNG-99 Durchgehender-Nut encoche continue continuously groove
Buchse entretoise bush Ø17
14 Ø28,5
37
3 Ø16,5
5
5
63-SCH-91
Spannbuchse entretoise de serrage / clamping bush
Ø44,5
42
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! Gruppe 3 Seite 222 La référence d´origine présentée ci-dessus ne sert qu´à la coordination!
groupe/section 3 page 222
The original part-numbers are only indicated for comparison!
54
Ø30
63-GIL-84
Ø35
®
Ø21
19,5
Ø17
Ø21
6,5
Elastische Distanzscheibe rondelle élastique / elastic washer
Ø32,5
Ø35,5
7
63-ROU-83
Ø27
Ø35
Ø13,5
6
Ø49
Ø34
63-DOP-82
Ø13
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
Ø20,5
21
Scheibe rondelle / washer
Ø27
Buchse entretoise / bush
63-DOP-81
34 46
Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved
63-AGR-81
Ø34
63-AGR-80
Ø12
25
Ø13,5
Ø29,5
Ø24,5
Ø12,5
50
12.12
Kettenmatten und Prallschutzketten
Nattes en maillons de chaîne et chaînes de protection Chain mesh mats and protection chains
Ausführung A modèle A typ A
oberflächengehärtet, galvanisch verzinkt, geschweißte Verbindungsringe trempé, galvanisé, anneaux de raccordement soudés surface-hardened, electrogalvanized, connecting rings welded
Ausführung B modèle B typ B
oberflächengehärtet, ungeschweißte Verbindungsringe trempé, anneaux de raccordement non-soudés surface-hardened, connecting rings not welded Kettenmatten 5 x 21 nattes en chaînes 5 x 21 mats made of chains 5 x 21
Best. Nr.: réf. article part-no.
Ausführung modèle typ
63-RÖT-01 63-RÖT-02 63-RÖT-03 63-RÖT-04 63-RÖT-05 63-RÖT-06
A A A B B B
Kettenmatten 5 x 21 nattes en chaînes 5 x 21 mats made of chains 5 x 21
Best. Nr.: réf. article part-no.
Ausführung modèle typ
63-RÖT-07 63-RÖT-19 63-RÖT-08 63-RÖT-09 63-RÖT-10 63-RÖT-11 63-RÖT-12
®
Prallschutzketten 8 x 32 chaînes de protection 8 x 32 protection chains 8 x 32 Best. Nr.: réf. article part-no.
63-RÖT-13 63-RÖT-14 63-RÖT-15 63-RÖT-16
A A A A B B B
Gerade Ausführung modèle droit straight model
Ausführung modèle typ
Länge longueur length
Gewicht poids weight
A A B B
250 300 250 300
0,720 0,850 0,720 0,850
Gerade Ausführung modèle droit straight model
Länge Höhe Gewicht longueur hauteur poids length height weight
1500 2000 5000 1500 2000 5000
250 250 250 250 250 250
11,100 14,800 27,000 11,000 12,000 30,000
Gedrehte Ausführung modèle torsadé twisted model Länge Höhe Gewicht longueur hauteur poids length height weight
1500 1800 2000 5000 1500 2000 5000
250 250 250 250 250 250 250
10,800 13,700 14,500 36,000 10,500 13,200 29,900
825444 Augenschraube Boulon à oeillet Eye bolt
25
15
Gewinde / filet / thread M8x1,25 Gewicht / poids / weight 0,220 Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! 12.12 La référence d´origine présentée ci-dessus ne sert qu´à la coordination! The original part-numbers are only indicated for comparison!
Gruppe 3 Seite 223 groupe/section 3 page 223
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding
Kettenmatten und Prallschutzketten für Schlegelmäher nattes en maillons de chaîne et chaînes de protection pour débroussaillesuses flail mover chain mesh mats and protection chains
Messer für Grabenfräsen nach Fabrikat: Couteaux pour fossoyeuses pour machines: Trencher blades to fit:
Cosmoter
633-IND-797
Cosmoter
633-SCO-01
633-SCO-02
60
60
12
10
55
172
118
273
M14x2
12,5
56
Ø12,5
10
70
75 Maschinentyp modèle de machine machine type
Maschinentyp modèle de machine machine type
0,690
Davis
B 201-221-261 M 11 0,600
Gewicht / poids / weight
Davis
633-SDA-01-R re/dr/ri 633-SDA-01-L li/ga/le
70 7 1 25
6
Abb. linke Ausführung fig. modèle gauche ill. left model
8
90 52
108
135
Ø10,5
Abb. linke Ausführung fig. modèle gauche ill. left model
633-SDA-02-R re/dr/ri 633-SDA-02-L li/ga/le
80
0 10
37
45
Orig.-Nr. / réf. origine / orig.-part-no. re/dr/ri Orig.-Nr. / réf. origine / orig.-part-no. li/ga/le
0,380
Gewicht / poids / weight
Dondi
633-SDO-01
Orig.-Nr. / réf. origine / orig.-part-no. re/dr/ri Orig.-Nr. / réf. origine / orig.-part-no. li/ga/le
Dondi
633-SDO-02
®
0,800
Gewicht / poids / weight
Dondi
633-SDO-04
60
50
Gewicht / poids / weight
DMR 25 0,350
Ø12
120
95
8
50
Ø12,5
Ø10,5
Maschinentyp modèle de machine machine type
182 51 51
12
10
30
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
1,250
Gewicht / poids / weight
Maschinentyp modèle de machine machine type
Ø17
Gewicht / poids / weight
B 201-221-261 M 11
Maschinentyp modèle de machine machine type Gewicht / poids / weight
DMR 45 0,600
155
Maschinentyp modèle de machine machine type Gewicht / poids / weight
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! Gruppe 3 Seite 224 La référence d´origine présentée ci-dessus ne sert qu´à la coordination!
groupe/section 3 page 224
The original part-numbers are only indicated for comparison!
60
S/25 A 0,870
Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved
Boos
12.12
Messer für Grabenfräsen nach Fabrikat: Couteaux pour fossoyeuses pour machines: Trencher blades to fit:
Dondi
Dondi
633-SDO-05 re/dr/ri 633-SDO-05L li/ga/le
633-SDO-06
Abb. linke Ausführung fig. modèle gauche ill. left model
8 51
8
65
65
60 Ø14,5
60
210
205
Rechte Ausführung - Maschinentyp modèle droit - modèle de machine right model - machine type
Linke Ausführung - Maschinentyp modèle gauche - modèle de machine left model - machine type
Gewicht poids weight
S/25 B
S/25 C
1,100
Gewicht / poids / weight
1,080
Dondi
633-SDO-07-R re/dr/ri 633-SDO-07-L li/ga/le
633-SDO-08 8
65
S/45 A
65
330
Ø14,5
Abb. linke Ausführung fig. modèle gauche ill. left model
60
60
Ø14,5
60
8 65
245
Maschinentyp modèle de machine machine type
215
S/65 A
Gewicht / poids / weight
Rechte Ausführung - Maschinentyp modèle droit - modèle de machine right model - machine type
Linke Ausführung - Maschinentyp modèle gauche - modèle de machine left model - machine type
Gewicht poids weight
S/45 B
S/45 C
1,710
1,450
Dondi
Dondi
633-SDO-10
633-SDO-09-R re/dr/ri 633-SDO-09-L li/ga/le
® 7
80 60
60
60
12,5
340
Abb. linke Ausführung fig. modèle gauche ill. left model Ø14,5 8 65
230
Maschinentyp modèle de machine machine type Gewicht / poids / weight
DMR 25/45 0,770
Rechte Ausführung - Maschinentyp modèle droit - modèle de machine right model - machine type
Linke Ausführung - Maschinentyp modèle gauche - modèle de machine left model - machine type
Gewicht poids weight
S/65 B
S/65 C
1,760
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! 12.12 La référence d´origine présentée ci-dessus ne sert qu´à la coordination! The original part-numbers are only indicated for comparison!
Gruppe 3 Seite 225 groupe/section 3 page 225
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
Dondi
Maschinentyp modèle de machine machine type
210
Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding
Ø12,5
Messer für Grabenfräsen nach Fabrikat: Couteaux pour fossoyeuses pour machines: Trencher blades to fit:
Maletti
Maletti
633-SMA-05
60
633-SMA-071 40
77
27
50
245
10
50
70
157
30
10
Ø11
Ø12,5
10
Ø14,5
Maschinentyp modèle de machine machine type
40
0,520
AFR/2 AFR/4R
Gewicht / poids / weight
Maletti
AFR/0 - AFR/1C AFR/0S - AFR/0S-3C - AFR/2R
1,160
Gewicht / poids / weight
0,220
Maletti
633-SMA-01
633-SMA-02 270
89
75
75
Ø14,5
Ø14,5
89
75
75
Orig.-Nr. / réf. origine / orig.-part-no.
Orig.-Nr. / réf. origine / orig.-part-no.
AFR/0 AFR/1C 1,330
Maschinentyp modèle de machine / machine type Gewicht / poids / weight
Maletti
AFR/2 AFR/4R 2,010
Maschinentyp modèle de machine / machine type Gewicht / poids / weight
Maletti
633-SMA-03
633-SMA-04
®
68
Ø14,5
Ø14,5
55
235
88
10
60
270 88
60
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
Maschinentyp modèle de machine / machine type
Maschinentyp modèle de machine machine type
Gewicht / poids / weight
175
32
88
88
Orig.-Nr. / réf. origine / orig.-part-no. Maschinentyp modèle de machine / machine type Gewicht / poids / weight
45
AFR/0S AFR/0S-3C 2,040
Orig.-Nr. / réf. origine / orig.-part-no. Maschinentyp modèle de machine / machine type Gewicht / poids / weight
AFR/0 - AFR/1C AFR/0S - AFR/0S-3C 0,940
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! Gruppe 3 Seite 226 La référence d´origine présentée ci-dessus ne sert qu´à la coordination!
groupe/section 3 page 226
The original part-numbers are only indicated for comparison!
Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved
633-IND-739
97
Dondi
12.12
Messer für Grabenfräsen nach Fabrikat: Couteaux pour fossoyeuses pour machines: Trencher blades to fit:
Maletti 40
Ø12,5
633-SMA-074 Ø12,5
10
32
102
27 100
10
10
32
32
Maschinentyp modèle de machine / machine type
Maschinentyp modèle de machine / machine type
Maschinentyp modèle de machine / machine type
AFR/0 - AFR/1C AFR/0S - AFR/0S-3C - AFR/2R
AFR/0 - AFR/1C AFR/0S - AFR/0S-3C
AFR/0 - AFR/1C AFR/0S - AFR/0S-3C
0,230
Gewicht / poids / weight
0,250
Gewicht / poids / weight
Maletti
633-SMA-075
633-SMA-10R re/dr/ri 633-SMA-10L li/ga/le
Ø12,5
Messer couteau blade 108
30
27
10
10
Abb. rechte Ausführung fig. modèle droite ill. right model
Ø14,5
32
AFR/2R 0,260
0,610
Gewicht / poids / weight
Mulag
Mulag
63-MUL-02-R re/dr/ri ® 63-MUL-02-L li/ga/le
Messer couteau / blade
Ø13
Ø16,5
60
Abb. rechts fig. droite ill. right
88
Orig.-Nr. / réf. origine / orig.-part-no. re/dr/ri Orig.-Nr. / réf. origine / orig.-part-no. li/ga/le Gewicht / poids / weight
12
0 12
57
8
170
63
58
Messer couteau blade
63-MUL-01
TM60190012 TM60190039 1,170
160
Gewicht / poids / weight
Orig.-Nr. / réf. origine / orig.-part-no. re/dr/ri Orig.-Nr. / réf. origine / orig.-part-no. li/ga/le
23
Maschinentyp modèle de machine machine type
83
Orig.-Nr. / réf. origine / orig.-part-no.
TM60190067
Gewicht / poids / weight
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! 12.12 La référence d´origine présentée ci-dessus ne sert qu´à la coordination! The original part-numbers are only indicated for comparison!
2,020
Gruppe 3 Seite 227 groupe/section 3 page 227
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
Maletti 40
0,240
Gewicht / poids / weight
170
Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding
40
Ø12,5
27
40
Maletti
633-SMA-073
27
633-SMA-072
105
Maletti
Rundschaftmeißel
635-0004
635-0001
635-0013
Rundschaftmeißel für Grabenfräsen mit Hartmetalleinsatz und Schaft Ø18,6 Burin à corps cylindrique pour fossoyeuses avec insertion en métal dur et corps Ø18,6 Round attrack tick for trencher with hardmetal and shaft Ø18,6
Rundschaftmeißel für Grabenfräsen mit Hartmetalleinsatz und Schaft Ø19,4 Burin à corps cylindrique pour fossoyeuses avec insertion en métal dur et corps Ø19,4 Round attrack tick for trencher with hardmetal and shaft Ø19,4
Rundschaftmeißel für Grabenfräsen mit Hartmetalleinsatz und Schaft Ø19,4 Burin à corps cylindrique pour fossoyeuses avec insertion en métal dur et corps Ø19,4 Round attrack tick for trencher with hardmetal and shaft Ø19,4
Ø12
Härte / dúreté / hardness Gewicht / poids / weight
1050HV 0,260
42
Ø27
Ø27
Ø19,4
Ø19,4
Härte / dúreté / hardness Gewicht / poids / weight
1050HV 0,230
635-0015
635-0028
Rundschaftmeißel für Grabenfräsen mit Hartmetalleinsatz und Schaft Ø22 Burin à corps cylindrique pour fossoyeuses avec insertion en métal dur et corps Ø22 Round attrack tick for trencher with hardmetal and shaft Ø22
Rundschaftmeißel für Grabenfräsen mit Hartmetalleinsatz und Schaft Ø25,1 Burin à corps cylindrique pour fossoyeuses avec insertion en métal dur et corps Ø25,1 Round attrack tick for trencher with hardmetal and shaft Ø25,1
Härte / dúreté / hardness Gewicht / poids / weight
1050HV 0,200
635-0014 Halter bride de support / holder
46
Ø18,6
83
86
46 85
Ø27
Ø12
Ø12
47
122
46
65
Ø19,9
87
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
Ø16,5
45
Ø16,5
®
60
Ø33
Ø27
Ø22
Härte / dúreté / hardness Gewicht / poids / weight
Ø25,1
1050HV 0,240
Härte / dúreté / hardness Gewicht / poids / weight
1050HV 0,420
Härte / dúreté / hardness Gewicht / poids / weight
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! Gruppe 3 Seite 228 La référence d´origine présentée ci-dessus ne sert qu´à la coordination!
groupe/section 3 page 228
The original part-numbers are only indicated for comparison!
0,590
Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved
Burin à corps cylindrique Round attrack tick
12.12
Rundschaftmeißel
635-0038
Rundschaftmeißel für Straßenfräsen mit Hartmetalleinsatz und Schaft Ø19,4 Burin à corps cylindrique pour fraiser de rue avec insertion en métal dur et corps Ø19,4 Round attrack tick for street trencher with hardmetal and shaft Ø19,4
Rundschaftmeißel für Straßenfräsen mit Hartmetalleinsatz und Schaft Ø19,4 Burin à corps cylindrique pour fraiser de rue avec insertion en métal dur et corps Ø19,4 Round attrack tick for street trencher with hardmetal and shaft Ø19,4
Ø19
635-0040 Halter bride de support / holder
44
635-0036
Ø16,5
35
55
Ø39
Ø37,5
Ø19,4
Ø19,4
Härte / dúreté / hardness Gewicht / poids / weight
1050HV 0,490
Härte / dúreté / hardness Gewicht / poids / weight
1050HV 0,280
Härte / dúreté / hardness Gewicht / poids / weight
0,366
635-0041 Halter bride de support / holder
47
38,5
Ø20
®
Härte / dúreté / hardness Gewicht / poids / weight
47
75
0,650
Obenstehende Original Ersatzteil Nr. dienen ausschließlich zu Vergleichszwecken! 12.12 La référence d´origine présentée ci-dessus ne sert qu´à la coordination! The original part-numbers are only indicated for comparison!
Gruppe 3 Seite 229 groupe/section 3 page 229
- Keine Original-Ersatzteile - Il ne s´agit pas de pièces originales - No genuine spare parts -
86
86
46
46
Ø20
40
Technische Änderungen vorbehalten - Modifications techniques réservées - Technical changes reserved Maße und Gewichte annähernd und unverbindlich - Les mesures et poids sont approximatifs et sous réserve - Dimensions and weights are approximate and not binding
Burin à corps cylindrique Round attrack tick