1000310000_CAT2_B_EN by Wexøe A/S

Contents

PCB Terminals

Clamping yoke connection for cross-sections up to 1.5 mm2

B.2

Clamping yoke connection for cross-sections up to 2.5 mm2

B.8

Clamping yoke connection for cross-sections up to 6 mm2

B.14

Clamping yoke connection for cross-sections up to 10 mm2

B.34

Clamping yoke connection for cross-sections up to 16 mm2

B.36

Clamping yoke connection for cross-sections up to 25 mm2

B.42

TOP connection

B.46

Leaf spring connection

B.60

Tension clamp connection

B.64

Spade connection

B.72

THR PCB Terminals with clamping yoke connection

B.78

THR PCB Terminals with Push In connection

B.82

B.1

Clamping yoke connection for cross-sections up to 1.5 mm2

LM 3.5

Derating curve

L1+P

• 0.5 - 1.5 mm2 (IEC) / 28 - 14 AWG (UL) • 320 V (IEC) / 300 V (UL) • 16 A (IEC) / 10 A (UL)

20 18 16 14 12 10 8 6 4 2 0

0,6 0.024" 1,9 0.075"

Small, compact PCB terminal with proven clamping yoke connection and 3.5 mm pitch. Conductor outlet direction 90° and 135°. Suitable for conductor cross-sections up to 1.5 mm2.

Load current I [A]

LM 3.5/90 / H07V-K1.5 Conductor current to EN 60947-7-1

min. No. of poles (2-pole)

L1 P

8,3 0.327"

12,8 0.504"

PCB Terminals

LM 3.5/90

4,4 0.174" 1,3+0,1 0.051"

10 20 30 40 50 60 70 80 90 100 110 Ambient temperature T [°C]

LM 3.5/135 / H07V-K1.5

Technical data

0.5…1.5 0.5…0.75 5 0.4 x 2.5 DIN 5264 0.2...0.25

A Overvoltage category Pollution severity

Ordering data Conductor current to EN 60947-7-1

Solder pin length Colour of plastic

3.2 mm orange

min. No. of poles (2-pole)

V kV

20°C 16

10 20 30 40 50 60 70 80 90 100 110

40°C 14

III 3

III 2

II 2

160 2.5

320 2.5

a UL 1059 rated data B C D Nominal voltage V 300 300 Rated current A 10 10 AWG conductor 28-14 r CSA C22.2 rated data B C D Rated voltage V 300 300 Rated current A 10 10 AWG conductor 28-14 Material data Type of insulating material PA Flammability class acc. UL94 V-2 Contact base material Cu alloy Material of contact surface tinned Information • Additional colours on request • Rated current related to rated cross-section and min. No. of poles. • Max. O.D. of conductor: 2.9 mm • Wire end ferrule with plastic collar to DIN 46228 pt 4 • P on drg. = pitch • Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards.

B.2

20 18 16 14 12 10 8 6 4 2 0

Ambient temperature T [°C]

Rated current at ambient temperature

Rated voltage Rated impulse voltage

0.08…2.08 0.5…1.5

Load current I [A]

Rated data to IEC 60664-1 / IEC 61984 Clamping range, max. mm2 Solid H05(07) V-U mm2 Stranded H07 V-R mm2 Flexible H05(07) V-K mm2 Flexible with ferrule mm2 Ferrule with plastic collar mm2 Stripping length mm Screwdriver blade mm according to norm Tightening torque range Nm

Pitch 3.50 mm PolesL1 mm 2 3.50 3 7.00 4 10.50 5 14.00 6 17.50 7 21.00 8 24.50 9 28.00 10 31.50 11 35.00 12 38.50

(inch) Qty. (0.138) 100 (0.276) 100 (0.413) 100 (0.551) 100 (0.689) 50 (0.827) 50 (0.965) 50 (1.102) 50 (1.240) 50 (1.378) 50 (1.516) 50

Order No. 1667750000 1667770000 1845040000 1720250000 1845050000 1845060000 1845070000 1845080000 1845090000 1845100000 1845110000

Order No.

Clamping yoke connection for cross-sections up to 1.5 mm2

Accessories PCB Terminals

LM 3.5/135

Possible colors Additional colours on request

0,6 0.024"

12,7 0.500"

L1 P

7,85 0.309"

12,7 0.500"

L1+P

6,2 0.244"

1,3+0,1 0.051"

Marking strips See chapter accessories

Ordering data Solder pin length Colour of plastic

3.2 mm orange

Screwdriver See chapter accessories Order No. 9008370000

Pitch 3.50 mm PolesL1 mm 2 3.50 3 7.00 4 10.50 5 14.00 6 17.50 7 21.00 8 24.50 9 28.00 10 31.50 11 35.00 12 38.50

(inch) Qty. (0.138) 100 (0.276) 100 (0.413) 100 (0.551) 50 (0.689) 50 (0.827) 50 (0.965) 50 (1.102) 50 (1.240) 50 (1.378) 50 (1.516) 50

Order No. 1714980000 1715020000 1845220000 1845230000 1845240000 1845250000 1845260000 1845270000 1845280000 1845290000 1845300000

Order No.

B.3

Clamping yoke connection for cross-sections up to 1.5 mm2

LM 3.5

Derating curve

PCB Terminals

LM1N 3.5

L1+P

• 0.5 - 1.5 mm2 (IEC) / 28 - 14 AWG (UL) • 320 V (IEC) / 300 V (UL) • 13 A (IEC) / 10 A (UL)

9,15 0.36"

24,1 0.949"

20 18 16 14 12 10 8 6 4 2 0

0,6 0.024"

Conductor current to EN 60947-7-1

13,2 0.52"

Small, compact double level PCB terminal with proven clamping yoke connection and 3.5 mm pitch. Conductor outlet direction 90°. Suitable for conductor cross-sections up to 1.5 mm2.

Load current I [A]

LM1N 3.5 / H07V-K1.5

min. No. of poles (2-pole)

L1 P

10 20 30 40 50 60 70 80 90 100 110

8,33 0.328" 1,3+0,1 0.051"

Ambient temperature T [°C]

Technical data

LM2N 3.50 / H07V-K1.5

Rated current at ambient temperature LM1N 3.5 LM2N 3.5

0.5…1.5 0.5…0.75 5 0.4 x 2.5 DIN 5264 0.2...0.25

Conductor current to EN 60947-7-1

Ordering data Solder pin length Colour of plastic

3.2 mm orange

min. No. of poles (4-pole)

A A

V kV

20°C 13 13

10 20 30 40 50 60 70 80 90 100 110

40°C 11 11

III 3

III 2

II 2

160 2.5

320 2.5

a UL 1059 rated data B C D Rated voltage V 300 300 Rated current A 10 10 AWG conductor 28-14 r CSA C22.2 rated data B C D Rated voltage V 300 300 Rated current A 10 10 AWG conductor 28-14 Material data Type of insulating material PA Flammability class acc. UL94 V-2 Contact base material Cu alloy Material of contact surface tinned Information • Additional colours on request • Rated current related to rated cross-section and min. No. of poles. • Max. O.D. of conductor: 2.9 mm • Wire end ferrule with plastic collar to DIN 46228 pt 4 • P on drg. = pitch • Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards.

B.4

18 16 14 12 10 8 6 4 2 0

Ambient temperature T [°C]

Overvoltage category Pollution severity Rated voltage Rated impulse voltage

0.08…2.08 0.5…1.5

Load current I [A]

Pitch 3.50 mm PolesL1 mm (inch) Qty. 2 3.50 (0.138) 100 3 7.00 (0.276) 100

Order No. 1716710000 1716720000

Order No.

Clamping yoke connection for cross-sections up to 1.5 mm2

Accessories PCB Terminals

LM2N 3.5 Multi level

Possible colors Additional colours on request

1,9 0.075" 13,2 0.52"

0.6 0.024

L1 P/2

1,3+0,1 0.051"

4,43 0.174" 15,93 0.627"

11,5 0.453"

16,75 0.659"

P/2

24,1 0.949"

L1+P

Marking strips See chapter accessories

Ordering data Solder pin length Colour of plastic

3.2 mm orange

Screwdriver See chapter accessories Order No. 9008370000

Pitch 3.50 mm PolesL1 mm 4 3.50 6 7.00 8 10.50 10 14.00 12 17.50 14 21.00 16 24.50 18 28.00 20 31.50 22 35.00 24 38.50 26 42.00 28 45.50 30 49.00 32 52.50 34 56.00 36 59.50 38 63.00 40 66.50 42 70.00 44 73.50 46 77.00 48 80.50

(inch) Qty. (0.138) 100 (0.276) 100 (0.413) 100 (0.551) 50 (0.689) 50 (0.827) 50 (0.965) 50 (1.102) 50 (1.240) 50 (1.378) 25 (1.516) 25 (1.654) 25 (1.791) 25 (1.929) 25 (2.067) 25 (2.205) 25 (2.343) 25 (2.480) 25 (2.618) 25 (2.756) 20 (2.894) 20 (3.031) 20 (3.169) 20

Order No. 1703700000 1703710000 1703720000 1703730000 1703740000 1703750000 1703760000 1703770000 1703780000 1703790000 1703800000 1703810000 1703820000 1703830000 1703840000 1703850000 1703860000 1703870000 1703880000 1703890000 1703900000 1703910000 1703920000

Order No.

B.5

Clamping yoke connection for cross-sections up to 1.5 mm2

Derating curve

LS 5.08/90

PCB Terminals

LS 5.08

min. No. of poles (2-pole)

• 0.08 - 1.5 mm2 (IEC) / 28 - 14 AWG (UL) • 630 V (IEC) / 300 V (UL) • 17.5 A (IEC) / 15 A (UL)

15 10 5

V kV

Ambient temperature T [°C]

Load current I [A]

0.08…1.5 0.25…1.5 0.25…1.5 6 0.6 x 3.5 DIN 5264 0.4...0.5

20 18 16 14 12 10 8 6 4 2 0

40°C 17.5

III 3

III 2

II 2

250 4

320 4

630 4

Ordering data Solder pin length Colour of plastic

min. No. of poles (2-pole)

Conductor current to EN 60947-7-1

max. No. of poles (24-pole)

0 10 20 30 40 50 60 70 80 90 100 110 120 130

a UL 1059 rated data B C D Nominal voltage V 300 300 Rated current A 15 10 AWG conductor 28-14 r CSA C22.2 rated data B C D Rated voltage V 300 300 Rated current A 20 10 AWG conductor 28-14 Material data Type of insulating material Wemid (PA) Flammability class acc. UL94 V-0 Contact base material Cu alloy Material of contact surface tinned Information • Rated current related to rated cross-section and min. No. of poles. • Wire end ferrule without plastic collar to DIN 46228 pt 1 • Wire end ferrule with plastic collar to DIN 46228 pt 4 • The data given under CSA relates to a cUL approval E60693 • P on drg. = pitch • Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards.

B.6

1.3+0.1 0.051"

0 10 20 30 40 50 60 70 80 90 100 110 120 130

Ambient temperature T [°C]

Overvoltage category Pollution severity

max. No. of poles (24-pole)

0.08…1.5 0.08…1.5

20°C 17.5

4.1 0.159"

LS 5.08 / H05V-K0.5

Rated current at ambient temperature

Rated voltage Rated impulse voltage

Conductor current to EN 60947-7-1

Technical data Rated data to IEC 60664-1 / IEC 61984 Clamping range, max. mm2 Solid H05(07) V-U mm2 Stranded H07 V-R mm2 Flexible H05(07) V-K mm2 Flexible with ferrule mm2 Ferrule with plastic collar mm2 Stripping length mm Screwdriver blade mm according to norm Tightening torque range Nm

8.1 0.319" 10.3 0.406"

30 Load current I [A]

Small, compact and powerful - this PCB terminal with proven clamping yoke connection and 5.08 mm pitch has a capacity of 17.5 A. Conductor outlet direction 90°. Suitable for conductor crosssections up to 1.5 mm2.

L1+P 0.5 0.020"

LSF 5.08 / H07V-K1.5

1.7 0.066"

3.5 mm black

Pitch 5.08 mm PolesL1 mm 2 5.08 3 10.16 4 15.24 5 20.32 6 25.40 7 30.48 8 35.56 9 40.64 10 45.72 11 50.80 12 55.88

(inch) (0.200) (0.400) (0.600) (0.800) (1.000) (1.200) (1.400) (1.600) (1.800) (2.000) (2.200)

Qty. 100 100 100 100 100 100 100 100 100 100 100

Order No.

Order No. 1810850000 1810860000 1810870000 1810880000 1810890000 1810900000 1810910000 1810920000 1810930000 1810940000 1810950000

Clamping yoke connection for cross-sections up to 1.5 mm2

PCB Terminals

Accessories

Possible colors Additional colours on request

Marking strips See chapter accessories

Screwdriver See chapter accessories Order No. 9008390000, Order No. 9008520000

B.7

Derating curve

LM 5.08/90 LM 5.00/90

L1+P

PCB terminal with proven clamping yoke connection in 5.00 and 5.08 mm pitch. Conductor outlet direction 90°, 135° and 180°. Suitable for conductor cross-sections up to 2.5 mm2.

• 0.2 - 2.5 mm2 (IEC) / 24 - 14 AWG (UL) • 630 V (IEC) / 300 V (UL) • 17.5 A (IEC) / 15 A (UL)

Load current I [A]

LM 5.00/5.08/90 / H07V-K1.5 26 24 22 20 18 16 14 12 10 8 6 4 2 0

10 0.394"

0.6 0.024"

min. No. of poles (2-pole)

13.8 0.543"

LM 5.08 LM 5.00

2.1 0.083"

PCB Terminals

Clamping yoke connection for cross-sections up to 2.5 mm2

Conductor current to EN 60947-7-1

4.8 0.19"

L1 P

max. No. of poles (24-pole)

1.3+0.1

0 10 20 30 40 50 60 70 80 90 100 110 120 130 Ambient temperature T [°C]

Technical data

LM 5.00/5.08/90 / H05V-K0.5

Load current I [A]

0.2…1.5 0.25…1.5 0.25…1.5 6 0.6 x 3.5 DIN 5264 0.4...0.5

min. No. of poles (2-pole)

Conductor current to EN 60947-7-1

max. No. of poles (24-pole)

0 10 20 30 40 50 60 70 80 90 100 110 120 130

III 3

III 2

II 2

250 4

320 4

630 4

a UL 1059 rated data B C D Nominal voltage V 300 300 Rated current A 15 10 AWG conductor 24-14 r CSA C22.2 rated data B C D Rated voltage V 300 300 Rated current A 18 10 AWG conductor 24-14 Material data Type of insulating material Wemid (PA) Flammability class acc. UL94 V-0 Contact base material Cu alloy Material of contact surface tinned Information • Rated current related to rated cross-section and min. No. of poles. • Wire end ferrule without plastic collar to DIN 46228 pt 1 • Wire end ferrule with plastic collar to DIN 46228 pt 4 • The data given under CSA relates to a cUL approval E60693 • P on drg. = pitch • Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards.

LM 5.00/5.08/135 / H07V-K1.5 30 25 Load current I [A]

V kV

40°C 17.5

min. No. of poles (2-pole)

20 15

Conductor current to EN 60947-7-1

10 5

max. No. of poles (24-pole)

0 0 10 20 30 40 50 60 70 80 90 100 110 120 130 Ambient temperature T [°C]

LM 5.00/5.08/180 / H07V-K1.5 30 25 Load current I [A]

A Overvoltage category Pollution severity

20°C 17.5

min. No. of poles (2-pole)

20 15

Conductor current to EN 60947-7-1

10 5

max. No. of poles (24-pole)

0 0 10 20 30 40 50 60 70 80 90 100 110 120 130 Ambient temperature T [°C]

B.8

Ordering data Solder pin length Colour of plastic

3.5 mm orange

Pitch 5.08 mm

Ambient temperature T [°C]

Rated current at ambient temperature

Rated voltage Rated impulse voltage

0.2…2.5 0.2…2.5

20 18 16 14 12 10 8 6 4 2 0

PolesL1 mm 2 5.08 3 10.16 4 15.24 5 20.32 6 25.40 7 30.48 8 35.56 9 40.64 10 45.72 11 50.80 12 55.88 13 60.96 14 66.04 15 71.12 16 76.20 17 81.28 18 86.36 19 91.44 20 96.52 21 101.60 22 106.68 23 111.76 24 116.84

(inch) (0.200) (0.400) (0.600) (0.800) (1.000) (1.200) (1.400) (1.600) (1.800) (2.000) (2.200) (2.400) (2.600) (2.800) (3.000) (3.200) (3.400) (3.600) (3.800) (4.000) (4.200) (4.400) (4.600)

Qty. 500 500 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50

Order No.

Order No. 1716080000 1716090000 9994130000 9994140000 9994150000 9994160000 9994170000 9994180000 9994190000 9994200000 9994210000 9994220000 9994230000 9994240000 9994250000 9994260000 9994270000 9994280000 9994290000 9994300000 9994310000 9994320000 9994330000

(inch) Qty. (0.197) 500 (0.394) 500 (0.591) 100 (0.787) 50 (0.984) 50 (1.181) 50 (1.378) 50 (1.575) 50 (1.772) 50 (1.969) 50 (2.165) 50

Order No.

Order No. 1715310000 1715320000 1821490000 1845310000 1845320000 1845330000 1845340000 1845350000 1845360000 1845370000 1845380000

Pitch 5.00 mm PolesL1 mm 2 5.00 3 10.00 4 15.00 5 20.00 6 25.00 7 30.00 8 35.00 9 40.00 10 45.00 11 50.00 12 55.00

Clamping yoke connection for cross-sections up to 2.5 mm2

LM 5.08/180 LM 5.00/180

Accessories PCB Terminals

LM 5.08/135 LM 5.00/135

Possible colors Additional colours on request 13,9 0.546"

L1+P 0,6 0.024"

10 0.394" 0,4 0.016"

7,8 0.305"

13,8 0.543"

15,5 0.610"

0,6 0.024" 5,2 0.204"

L1+P

1,3+0,1 0.051"

Marking strips See chapter accessories

Ordering data

Solder pin length Colour of plastic

3.5 mm orange

Pitch 5.08 mm PolesL1 mm 2 5.08 3 10.16 4 15.24 5 20.32 6 25.40 7 30.48 8 35.56 9 40.64 10 45.72 11 50.80 12 55.88 13 60.96 14 66.04 15 71.12 16 76.20 17 81.28 18 86.36 19 91.44 20 96.52 21 101.60 22 106.68 23 111.76 24 116.84

(inch) (0.200) (0.400) (0.600) (0.800) (1.000) (1.200) (1.400) (1.600) (1.800) (2.000) (2.200) (2.400) (2.600) (2.800) (3.000) (3.200) (3.400) (3.600) (3.800) (4.000) (4.200) (4.400) (4.600)

3.5 mm orange

Pitch 5.08 mm Qty. 500 500 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50

Order No.

(inch) Qty. (0.197) 500 (0.394) 500 (0.591) 50 (0.787) 50 (0.984) 50 (1.181) 50 (1.378) 50 (1.575) 50 (1.772) 50 (1.969) 50 (2.165) 50

Order No.

Order No. 1716120000 1716130000 9994550000 9994560000 9994570000 9994580000 9994590000 9994600000 9994610000 9994620000 9994630000 9994640000 9994650000 9994660000 9994670000 9994680000 9994690000 9994700000 9994710000 9994720000 9994730000 9994740000 9994750000

Pitch 5.00 mm PolesL1 mm 2 5.00 3 10.00 4 15.00 5 20.00 6 25.00 7 30.00 8 35.00 9 40.00 10 45.00 11 50.00 12 55.00

Solder pin length Colour of plastic PolesL1 mm 2 5.08 3 10.16 4 15.24 5 20.32 6 25.40 7 30.48 8 35.56 9 40.64 10 45.72 11 50.80 12 55.88 13 60.96 14 66.04 15 71.12 16 76.20 17 81.28 18 86.36 19 91.44 20 96.52 21 101.60 22 106.68 23 111.76 24 116.84

(inch) (0.200) (0.400) (0.600) (0.800) (1.000) (1.200) (1.400) (1.600) (1.800) (2.000) (2.200) (2.400) (2.600) (2.800) (3.000) (3.200) (3.400) (3.600) (3.800) (4.000) (4.200) (4.400) (4.600)

Qty. 500 500 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50

Order No.

PolesL1 mm (inch) Qty. 2 5.00 (0.197) 500 3 10.00 (0.394) 500

Order No.

Order No. 1716100000 1716110000 9994970000 9994980000 9994990000 9995000000 9995010000 9995020000 9995030000 9995040000 9995050000 9995060000 9995070000 9995080000 9995090000 9995100000 9995110000 9995120000 9995130000 9995140000 9995150000 9995210000 9995220000

Screwdriver See chapter accessories Order No. 9008390000, Order No. 9008520000

Pitch 5.00 mm Order No. 1715350000 1715360000 1845390000 1845400000 1845410000 1845420000 1845430000 1845440000 1845450000 1845460000 1845470000

Order No. 1715330000 1715340000

B.9

Clamping yoke connection for cross-sections up to 2.5 mm2

Derating curve

LM1N 5.08

PCB Terminals

LM 5.08 multi level

Single row, middle

L1+P 0,5 0,6 0.018" 0.022"

• 0.2 - 2.5 mm2 (IEC) / 24 - 14 AWG (UL) • 630 V (IEC) / 300 V (UL) • 17.5 A (IEC) / 15 A (UL)

24 22 20 18 16 14 12 10 8 6 4 2 0

12,6 0.496"

min. No. of poles (2-pole) 13,5 0.531" 25,2 0.992"

Modular multi level PCB terminal with proven clamping yoke connection at 5.08 mm pitch, conductor outlet direction 90°, suitable for conductor crosssections up to 2.5 mm2.

Load current I [A]

LM1N 5.08 / H07V-K1.5

Conductor current to EN 60947-7-1

11.0 0.434"

max. No. of poles (24-pole) L1 P

1,3+0,1 0.051"

0 10 20 30 40 50 60 70 80 90 100 110 120 130 Ambient temperature T [°C]

Technical data Load current I [A]

0.2…1.5 0.25…1.5 0.25…1.5 6 0.6 x 3.5 DIN 5264 0.4...0.5

Solder pin length Colour of plastic min. No. of poles (2-pole)

Conductor current to EN 60947-7-1

V kV

40°C 17.5 17.5

III 3

III 2

II 2

250 4

320 4

630 4

LM1H 5.08 / H07V-K1.5

Load current I [A]

A A

20°C 17.5 17.5

24 22 20 18 16 14 12 10 8 6 4 2 0

min. No. of poles (2-pole)

Conductor current to EN 60947-7-1

max. No. of poles (24-pole)

0 10 20 30 40 50 60 70 80 90 100 110 120 130 Ambient temperature T [°C]

LM1H / H05V-K0.5 18 16 14 12 10 8 6 4 2 0

min. No. of poles (2-pole)

Conductor current to EN 60947-7-1

0 10 20 30 40 50 60 70 80 90 100 110 120 130 Ambient temperature T [°C]

3.5 mm orange

Pitch 5.08 mm PolesL1 mm (inch) 2 5.08 (0.200) 3 10.16 (0.400)

0 10 20 30 40 50 60 70 80 90 100 110 120 130

a UL 1059 rated data B C D Rated voltage V 300 300 Rated current A 15 10 AWG conductor 24-14 r CSA C22.2 rated data B C D Rated voltage V 300 300 Rated current A 18 10 AWG conductor 24-14 Material data Type of insulating material Wemid (PA) Flammability class acc. UL94 V-0 Contact base material Cu alloy Material of contact surface tinned Information • Rated current related to rated cross-section and min. No. of poles. • Wire end ferrule without plastic collar to DIN 46228 pt 1 • Wire end ferrule with plastic collar to DIN 46228 pt 4 • The data given under CSA relates to a cUL approval E60693 • P on drg. = pitch • Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards.

B.10

18 16 14 12 10 8 6 4 2 0

Ambient temperature T [°C]

Overvoltage category Pollution severity Rated voltage Rated impulse voltage

0.2…2.5 0.2…2.5

Load current I [A]

Rated current at ambient temperature LM1N 5.08 LM1H 5.08

Ordering data

LM1N 5.08 / H05V-K0.5

Qty. 100 100

Order No.

Order No. 1766300000 1766310000

Clamping yoke connection for cross-sections up to 2.5 mm2

Accessories PCB Terminals

LM1H 5.08 Single row, high

Possible colors Additional colours on request

L1+P

11,2 0.441"

24,9 0.98"

36,6 1.441"

0,5 0,6 0.018" 0.026"

9,6 0.379"

L1 P 1,3+0,1 0.051"

Marking strips See chapter accessories

Ordering data Solder pin length Colour of plastic

3.5 mm orange

Pitch 5.08 mm PolesL1 mm (inch) 2 5.08 (0.200) 3 10.16 (0.400)

Qty. 100 100

Order No.

Order No. 1766360000 1766370000

Screwdriver See chapter accessories Order No. 9008390000, Order No. 9008520000

B.11

Clamping yoke connection for cross-sections up to 2.5 mm2

Derating curve

LM2N 5.08

PCB Terminals

LM 5.08 multi level

Double level row

L1+P

• 0.2 - 2.5 mm2 (IEC) / 24 - 14 AWG (UL) • 630 V (IEC) / 300 V (UL) • 17.5 A (IEC) / 15 A (UL)

12 Load current I [A]

0.2…1.5 0.25…1.5 0.25…1.5 6 0.6 x 3.5 DIN 5264 0.4...0.5

6 Conductor current to EN 60947-7-1

2 0 0 10 20 30 40 50 60 70 80 90 100 110 120 130

40°C 17.5 17.5 17.5 III 2

II 2

250 4

320 4

630 4

LM2H 5.08 / H07V-K1.5 Load current I [A]

III 3

20 18 16 14 12 10 8 6 4 2 0

Conductor current to EN 60947-7-1

min. No. of poles (4-pole)

0 10 20 30 40 50 60 70 80 90 100 110 120 130 Ambient temperature T [°C]

LM3R 5.08 / H07V-K1.5

Load current I [A]

V kV

20°C 17.5 17.5 17.5

20 18 16 14 12 10 8 6 4 2 0

25,2 0.992"

15,3 0.604"

Solder pin length Colour of plastic

3.5 mm orange

Pitch 5.08 mm

Ambient temperature T [°C]

Overvoltage category Pollution severity

B.12

min. No. of poles (4-pole)

1,3+0,1 0.051"

Ordering data

LM2N 5.08 / H05V-K0.5

A A A

P/2

Ambient temperature T [°C]

0.2…2.5 0.2…2.5

4,8 0.189"

L1 P

Rated voltage Rated impulse voltage

min. No. of poles (4-pole)

0 10 20 30 40 50 60 70 80 90 100 110 120 130

Technical data

Rated current at ambient temperature LM2N 5.08 LM2H 5.08 LM3R 5.08

Conductor current to EN 60947-7-1 2,1 0.083"

20 18 16 14 12 10 8 6 4 2 0

13,5 0.531"

Load current I [A]

Multi level PCB terminal with proven clamping yoke connection in 5.08 mm pitch. Conductor outlet direction 90°. Suitable for conductor cross-sections up to 2.5 mm2.

21,6 0.852"

0,5 0,6 0.018" 0.022"

LM2N 5.08 / H07V-K1.5

Conductor current to EN 60947-7-1

min. No. of poles (2-pole)

max. No. of poles (72-pole)

0 10 20 30 40 50 60 70 80 90 100 110 120 130 Ambient temperature T [°C]

PolesL1 mm 4 5.08 6 10.16 8 15.24 10 20.32 12 25.40 14 30.48 16 35.56 18 40.64 20 45.72 22 50.80 24 55.88 26 60.96 28 66.04 30 71.12 32 76.20 34 81.28 36 86.36 38 91.44 40 96.52 42 101.60 44 106.68 46 111.76 48 116.84

(inch) (0.200) (0.400) (0.600) (0.800) (1.000) (1.200) (1.400) (1.600) (1.800) (2.000) (2.200) (2.400) (2.600) (2.800) (3.000) (3.200) (3.400) (3.600) (3.800) (4.000) (4.200) (4.400) (4.600)

Qty. 50 50 50 50 20 20 20 20 20 20 10 10 10 10 10 10 10 10 10 10 10 10 10

Order No.

Order No. 1768850000 1768860000 1768870000 1768880000 1768890000 1768900000 1768910000 1768920000 1768930000 1768940000 1768950000 1768960000 1768970000 1768980000 1768990000 1769000000 1769010000 1769020000 1769030000 1769040000 1769050000 1769060000 1769070000

Clamping yoke connection for cross-sections up to 2.5 mm2

LM3R 5.08

Double level row high

Triple level

Accessories PCB Terminals

LM2H 5.08

Possible colors P/2

L1+P 22,8 0.898"

0,6 0,5 0.018" 0.022"

24,9 0.98" 36.6 1.441" 13,5 0.531"

13,5 0.531"

P/2

1,3+0,1 0.051"

4,8 0.189"

10,16 0.400"

1,3+0,1 0.051"

15,24 0.600"

10,16 0.400"

31,8 1.252"

11,0 0.434"

L1 P/2

Additional colours on request

L1 + P

2,1 0.083"

0,6 0.022"

24,9 0.98"

0,5 0.018"

36,6 1.441"

P/2

Marking strips See chapter accessories

Ordering data

Solder pin length Colour of plastic

3.5 mm orange

Pitch 5.08 mm PolesL1 mm 4 5.08 6 10.16 8 15.24 10 20.32 12 25.40 14 30.48 16 35.56 18 40.64 20 45.72 22 50.80 24 55.88 26 60.96 28 66.04 30 71.12 32 76.20 34 81.28 36 86.36 38 91.44 40 96.52 42 101.60 44 106.68 46 111.76 48 111.76

(inch) (0.200) (0.400) (0.600) (0.800) (1.000) (1.200) (1.400) (1.600) (1.800) (2.000) (2.200) (2.400) (2.600) (2.800) (3.000) (3.200) (3.400) (3.600) (3.800) (4.000) (4.200) (4.400) (4.400)

Solder pin length Colour of plastic

3.5 mm orange

Pitch 5.08 mm Qty. 50 50 50 50 20 20 20 20 20 20 10 10 10 10 10 10 10 10 10 10 10 10 10

Order No.

Order No. 1769240000 1769250000 1769260000 1769270000 1769280000 1769290000 1769300000 1769310000 1769320000 1769330000 1769340000 1769350000 1769360000 1769370000 1769380000 1769390000 1769400000 1769410000 1769420000 1769430000 1769440000 1769450000 1769460000

PolesL1 mm 6 5.08 9 10.16 12 15.24 15 20.32 18 25.40 21 30.48 24 35.56 27 40.64 30 45.72 33 50.80 36 55.88 39 60.96 42 66.04 45 71.12 48 76.20 51 81.28 54 86.36 57 91.44 60 96.52 63 101.60 66 106.68 69 111.76 72 116.84

(inch) (0.200) (0.400) (0.600) (0.800) (1.000) (1.200) (1.400) (1.600) (1.800) (2.000) (2.200) (2.400) (2.600) (2.800) (3.000) (3.200) (3.400) (3.600) (3.800) (4.000) (4.200) (4.400) (4.600)

Qty. 50 50 50 25 25 20 20 20 10 10 10 10 10 10 10 10 5 5 5 5 5 5 5

Order No.

Order No. 1769620000 1769630000 1769640000 1769650000 1769660000 1769670000 1769680000 1769690000 1769700000 1769710000 1769720000 1769730000 1769740000 1769750000 1769760000 1769770000 1769780000 1769790000 1769800000 1769810000 1769820000 1769830000 1769840000

Screwdriver See chapter accessories Order No. 9008390000, Order No. 9008520000

B.13

LP 5.08 LP 5.00

Derating curve

LP 5.08/90 LP 5.00/90

L1+P

0,6 0.024"

LP 5.08/90 / H07V-K4.0

• 0.5 - 6.0 mm2 (IEC) / 26 - 12 AWG (UL) • 500 V (IEC) / 300 V (UL) • 32 A (IEC) / 20 A (UL)

20 min. No. of poles (2-pole)

P 0

V kV

5,5 0.217"

1,3+0,1 0.051"

0 10 20 30 40 50 60 70 80 90 100 110 Ambient temperature T [°C]

Ordering data

50 Load current I [A]

0.13…6 0.5…6 0.5…4 0.5…2.5 0.5…2.5 6 0.6 x 3.5 DIN 5264 0.5...0.6

Conductor current to EN 60947-7-1

30 20 min. No. of poles (2-pole)

10 0 0

20°C 32

40°C 32

III 3

III 2

II 2

250 4

500 4

a UL 1059 rated data B C D Nominal voltage V 300 300 Rated current A 20 10 AWG conductor 26-12 r CSA C22.2 rated data B C D Rated voltage V 300 300 Rated current A 20 10 AWG conductor 26-12 Material data Type of insulating material PA Flammability class acc. UL94 V-2 Contact base material Cu alloy Material of contact surface tinned Information • Additional colours on request • Rated current related to rated cross-section and min. No. of poles. • Wire end ferrule without plastic collar to DIN 46228 pt 1 • Wire end ferrule with plastic collar to DIN 46228 pt 4 • P on drg. = pitch • Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards.

B.14

10 20 30 40 50 60 70 80 90 100 110 Ambient temperature T [°C]

Overvoltage category Pollution severity Rated voltage Rated impulse voltage

Conductor current to EN 60947-7-1

LP 5.08/180 / H07V-K4.0

Rated current at ambient temperature

17 0.669"

11 0.433"

50 Load current I [A]

This PCB terminal provides connections for 32 A and 6 mm2 conductor cross-section with established clamping yoke connection at 5.00 and 5.08 mm pitch, conductor outlet direction in 90° and 180° design, with extensive auxiliary functions

2,4 0.094"

PCB Terminals

Clamping yoke connection for cross-sections up to 6 mm2

Solder pin length Colour of plastic

3.2 mm orange

(inch) (0.200) (0.400) (0.600) (0.800) (1.000) (1.200) (1.400) (1.600) (1.800) (2.000) (2.200) (2.400) (2.600) (2.800) (3.000) (3.200) (3.400) (3.600) (3.800) (4.000) (4.200) (4.400) (4.600)

Qty. 100 100 100 50 50 50 50 50 50 50 50 50 50 50 50 20 20 20 20 20 20 20 20

Order No. 1592820000 1592830000 1594360000 1724530000 1608250000 1759120000 1594370000 1759130000 1594380000 1760480000 1608270000 1759140000 1759150000 1759160000 1594390000 1759170000 1759180000 1844450000 1759190000 1759200000 1844460000 1844470000 1608290000

Order No.

(inch) Qty. (0.197) 100 (0.394) 100 (0.591) 100 (0.787) 50 (0.984) 50 (1.181) 50 (1.378) 50 (1.575) 50 (1.772) 50 (1.969) 50 (2.165) 50 (2.953) 50 (4.528) 20

Order No. 1594320000 1594330000 1608310000 1759100000 1608330000 1844480000 1608350000 1753300000 1608370000 1844490000 1608390000 1608410000 1608430000

Order No.

Pitch 5.00 mm PolesL1 mm 2 5.00 3 10.00 4 15.00 5 20.00 6 25.00 7 30.00 8 35.00 9 40.00 10 45.00 11 50.00 12 55.00 16 75.00 24 115.00

Clamping yoke connection for cross-sections up to 6 mm2

Accessories PCB Terminals

LP 5.08/180 LP 5.00/180

Possible colors Additional colours on request

L1+P 0,6 0.024"

11 0.433"

17 0.669"

1 0.041"

L1 P

1,3+0,1 0.051"

Spacer + fixing block See chapter accessories

Ordering data Solder pin length Colour of plastic

3.2 mm orange

Pitch 5.08 mm PolesL1 mm (inch) 2 5.08 (0.200) 3 10.16 (0.400)

Qty. 100 100

Order No. 1753810000 1753820000

Order No.

Marking and function indicator See chapter accessories

Fuse element and disconnection element See chapter accessories

Pitch 5.00 mm PolesL1 mm (inch) Qty. 2 5.00 (0.197) 100 3 10.00 (0.394) 100

Order No. 1761330000 1761340000

Order No.

Screwdriver See chapter accessories Order No. 9008390000

B.15

PCB Terminals

Clamping yoke connection for cross-sections up to 6 mm2

LP 5.08 LP 5.00

Derating curve

LPP 5.08/90 LPP 5.00/90 with test point

L1+P

13,4 0.528"

0,6 0.024"

LP 5.08/90 / H07V-K4.0

• 0.5 - 6.0 mm2 (IEC) / 26 - 12 AWG (UL) • 500 V (IEC) / 300 V (UL) • 32 A (IEC) / 20 A (UL)

min. No. of poles (2-pole)

0 0

5,5 0.217"

1,3+0,1 0.051"

10 20 30 40 50 60 70 80 90 100 110 Ambient temperature T [°C]

Ordering data

50 Load current I [A]

0.13…6 0.5…6 0.5…4 0.5…2.5 0.5…2.5 6 0.6 x 3.5 DIN 5264 0.5...0.6

Conductor current to EN 60947-7-1

30 20 min. No. of poles (2-pole)

Solder pin length Colour of plastic

3.2 mm orange

Pitch 5.08 mm PolesL1 mm (inch) 2 5.08 (0.200) 3 10.16 (0.400)

Qty. 100 100

Order No. 1594400000 1594410000

Order No.

PolesL1 mm (inch) Qty. 2 5.00 (0.197) 100 3 10.00 (0.394) 100

Order No. 1594340000 1594350000

Order No.

10 0 0

10 20 30 40 50 60 70 80 90 100 110 Ambient temperature T [°C]

A Overvoltage category Pollution severity V kV

20°C 32

40°C 32

III 3

III 2

II 2

250 4

500 4

B.16

2,4 0.094"

LP 5.08/135 / H07V-K4.0

Rated current at ambient temperature

Rated voltage Rated impulse voltage

Conductor current to EN 60947-7-1

17 0.669"

50 Load current I [A]

Test point, 32 A and 6 mm2 conductor cross-section are feasible with this PCB terminal with proven clamping yoke connection at 5.00 and 5.08 mm pitch, conductor outlet direction 90° and 135°, with extensive auxiliary functions.

Pitch 5.00 mm

Clamping yoke connection for cross-sections up to 6 mm2

Accessories PCB Terminals

LP 5.08/135 LP 5.00/135 with test point

Possible colors Additional colours on request 0,6 0.024"

17,5 0.689"

L1 P

7,9 0.309"

16,8 0.662"

L1+P

7,5 0.293"

1,3+0,1 0.051"

Spacer + fixing block See chapter accessories

Ordering data Solder pin length Colour of plastic

3.2 mm orange

Pitch 5.08 mm PolesL1 mm 2 5.08 3 10.16 4 15.24 5 20.32 6 25.40 7 30.48 8 35.56 9 40.64 10 45.72 11 50.80 12 55.88

(inch) (0.200) (0.400) (0.600) (0.800) (1.000) (1.200) (1.400) (1.600) (1.800) (2.000) (2.200)

Qty. 100 100 100 50 50 50 50 50 50 50 50

Order No. 1595730000 1595690000 1759210000 1843150000 1759360000 1843160000 1752940000 1843170000 1843180000 1843190000 1843200000

Order No.

Marking and function indicator See chapter accessories

Fuse element and disconnection element See chapter accessories

Pitch 5.00 mm PolesL1 mm 2 5.00 3 10.00 4 15.00 5 20.00 6 25.00 7 30.00 8 35.00 9 40.00 10 45.00 11 50.00 12 55.00

(inch) Qty. (0.197) 100 (0.394) 100 (0.591) 50 (0.787) 50 (0.984) 50 (1.181) 50 (1.378) 50 (1.575) 50 (1.772) 50 (1.969) 50 (2.165) 50

Order No. 1595750000 1595710000 1791710000 1843210000 1843220000 1843230000 1843240000 1843250000 1843260000 1843270000 1843280000

Order No.

Test plug See chapter accessories

B.17

LP 5.08 multi level LP 5.00 multi level

Derating curve

LP1N 5.08 LP1N 5.00 Single row, middle

L1+P

0,6 0.024"

LP1N 5.08 / H07V-K4.0

• 0.5 - 6.0 mm2 (IEC) / 26 - 12 AWG (UL) • 500 V (IEC) / 300 V (UL) • 32 A (IEC) / 20 A (UL)

11,5 0.454"

Conductor current to EN 60947-7-1

31 1.220"

50 Load current I [A]

Modular multi level PCB terminal with proven clamping yoke connection at 5.08 mm pitch, conductor outlet direction 90°, suitable for conductor crosssections up to 6.0 mm2.

16,4 0.646"

PCB Terminals

Clamping yoke connection for cross-sections up to 6 mm2

20 min. No. of poles (2-pole)

10,4 0.409"

L1 P

0 0

1,3+0,1 0.051"

10 20 30 40 50 60 70 80 90 100 110 Ambient temperature T [°C]

Technical data

Rated current at ambient temperature LP1N 5.08 LP1H 5.08

Load current I [A]

0.13…6 0.5…6 0.5…4 0.5…2.5 0.5…2.5 6 0.6 x 3.5 DIN 5264 0.5...0.6

Conductor current to EN 60947-7-1

30 20 min. No. of poles (2-pole)

Solder pin length Colour of plastic

3.2 mm orange

Pitch 5.08 mm PolesL1 mm (inch) 2 5.08 (0.200) 3 10.16 (0.400)

Qty. 100 100

Order No. 1640830000 1640840000

Order No.

PolesL1 mm (inch) Qty. 2 5.00 (0.197) 100 3 10.00 (0.394) 100

Order No. 1640870000 1640880000

Order No.

10 0 0

A A

V kV

20°C 32 32

10 20 30 40 50 60 70 80 90 100 110

40°C 32 32

III 3

III 2

II 2

250 4

500 4

a UL 1059 rated data B C D Rated voltage V 300 300 Rated current A 20 10 AWG conductor 26-12 r CSA C22.2 rated data B C D Rated voltage V 300 300 Rated current A 20 10 AWG conductor 26-12 Material data Type of insulating material PA Flammability class acc. UL94 V-2 Contact base material Cu alloy Material of contact surface tinned Information • Additional colours on request • Rated current related to rated cross-section and min. No. of poles. • Wire end ferrule without plastic collar to DIN 46228 pt 1 • Wire end ferrule with plastic collar to DIN 46228 pt 4 • P on drg. = pitch • Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards.

B.18

Ambient temperature T [°C]

Overvoltage category Pollution severity Rated voltage Rated impulse voltage

Ordering data

LP1H 5.08 / H07V-K4.0 50

Pitch 5.00 mm

Clamping yoke connection for cross-sections up to 6 mm2

Accessories PCB Terminals

LP1H 5.08 Single row, high

Possible colors Additional colours on request

L1+P

11 0.433"

30,4 1.197"

45 1.772"

0,6 0.024"

9,9 0.388"

L1 P

1,3+0,1 0.051"

Marking system See chapter accessories

Ordering data Solder pin length Colour of plastic

3.2 mm orange

Pitch 5.08 mm PolesL1 mm (inch) 2 5.08 (0.200) 3 10.16 (0.400)

Qty. 100 100

Order No. 1640910000 1640920000

Order No.

Marking and function indicator See chapter accessories

Screwdriver See chapter accessories Order No. 9008390000

B.19

LP 5.08 multi level LP 5.00 multi level

Derating curve

LP2N 5.08 LP2N 5.00 Double level row

L1+P

• 0.5 - 6.0 mm2 (IEC) / 26 - 12 AWG (UL) • 500 V (IEC) / 300 V (UL) • 32 A (IEC) / 20 A (UL)

50 40

21,8 0.860"

Conductor current to EN 60947-7-1

2,4 0.094"

Load current I [A]

Multi level PCB terminal with proven clamping yoke connection in 5.08 mm pitch. Conductor outlet direction 90°. Suitable for conductor cross-sections up to 6.0 mm2.

P/2+0,6 P/2+0.024" 17 0.669" 31 1.220"

LP2N 5.08 / H07V-K4.0

30 20 min. No. of poles (4-pole) P

L1 P/2

0 0

1,3+0,1 0.051"

5,45 0.215"

15,2 0.600"

PCB Terminals

Clamping yoke connection for cross-sections up to 6 mm2

10 20 30 40 50 60 70 80 90 100 110 Ambient temperature T [°C]

Technical data Load current I [A]

0.5…4 0.5…2.5 0.5…2.5 6 0.6 x 3.5 DIN 5264 0.5...0.6

Conductor current to EN 60947-7-1

30 20 min. No. of poles (4-pole)

10 0 0

A A A

V kV

20°C 32 32 32

40°C 32 32 30

III 3

III 2

II 2

250 4

500 4

B.20

10 20 30 40 50 60 70 80 90 100 110 Ambient temperature T [°C]

Overvoltage category Pollution severity Rated voltage Rated impulse voltage

0.13…6 0.5…6

LP3R 5.08 / H07V-K4.0 Load current I [A]

Rated current at ambient temperature LP2N 5.08 LP2HR 5.08 LP3R 5.08

Ordering data

LP2H 5.08 / H07V-K4.0 50

40 35 30 25 20 15 10 5 0

Conductor current to EN 60947-7-1

min. No. of poles (6-pole)

10 20 30 40 50 60 70 80 90 100 110 Ambient temperature T [°C]

Solder pin length Colour of plastic

3.2 mm orange

(inch) (0.200) (0.400) (0.600) (0.800) (1.000) (1.200) (1.400) (1.600) (1.800) (2.000) (2.200) (2.400) (2.600) (2.800) (3.000) (3.200) (3.400) (3.600) (3.800) (4.000) (4.200) (4.400) (4.600)

Qty. 50 50 50 50 50 50 20 20 20 20 10 10 10 10 10 10 10 10 10 10 10 10 10

Order No. 1635140000 1625540000 1596460000 1596510000 1844510000 1844520000 1596530000 1844530000 1596570000 1844540000 1596610000 1844550000 1844560000 1596650000 1844570000 1844580000 1844590000 1844600000 1844610000 1844620000 1844630000 1844640000 1844650000

Order No.

(inch) Qty. (0.197) 50 (0.394) 50 (0.591) 50 (0.787) 50 (1.378) 20 (1.772) 20 (2.165) 10 (2.756) 10

Order No. 1635160000 1625560000 1596450000 1596490000 1596550000 1596590000 1596630000 1596670000

Order No.

Pitch 5.00 mm PolesL1 mm 4 5.00 6 10.00 8 15.00 10 20.00 16 35.00 20 45.00 24 55.00 30 70.00

Clamping yoke connection for cross-sections up to 6 mm2

LP3R 5.08

Double level row high

Triple level

Accessories PCB Terminals

LP2HR 5.08

Possible colors L1+P

0.6 0.024"

21.7 0.854"

Additional colours on request

1.3+0.1 0.051"

10.4 0.409"

L1 P/2

5,45 0.215"

1,3+0,1 0.051" 10,16 0.400"

L1 P/2

15,24 0.600"

10.16 0.4"

2,4 0.094"

16.4 0.646" 3 1 1.220" 4 5 1.772"

17 0.669" 31 1.220"

45 1.772"

L1+P P/2

32 1.260"

0,6 0.024"

Marking system See chapter accessories

Ordering data

Solder pin length Colour of plastic

3.2 mm orange

Solder pin length Colour of plastic

(inch) (0.200) (0.400) (0.600) (0.800) (1.000) (1.200) (1.400) (1.600) (1.800) (2.000) (2.200) (2.400) (2.600) (2.800) (3.000) (3.200) (3.400) (3.600) (3.800) (4.000) (4.200) (4.400) (4.600)

3.2 mm orange

Pitch 5.08 mm Qty. 50 50 50 50 20 20 20 20 20 20 10 10 10 10 10 10 10 10 10 10 10 10 10

Order No. 1636210000 1636220000 1636230000 1636240000 1844660000 1844670000 1636250000 1844680000 1636260000 1613260000 1636270000 1844690000 1844700000 1636280000 1844710000 1844720000 1844730000 1844740000 1844750000 1844760000 1844770000 1844780000 1646480000

Order No.

(inch) (0.200) (0.400) (0.600) (0.800) (1.000) (1.200) (1.400) (1.600) (1.800) (2.000) (2.200) (2.400) (2.600) (2.800) (3.000) (3.200) (3.400) (3.600) (3.800) (4.000) (4.200) (4.400) (4.600)

Qty. 50 50 50 25 25 20 20 10 10 10 10 10 10 10 10 10 10 5 5 5 5 5 5

Order No. 1653930000 1596320000 1596340000 1596360000 1596380000 1844790000 1596400000 1844800000 1596420000 1844810000 1844820000 1844830000 1844840000 1844850000 1844860000 1844870000 1844880000 1844890000 1844900000 1844910000 1844920000 1844930000 1844940000

Order No.

Marking and function indicator See chapter accessories

Screwdriver See chapter accessories Order No. 9008390000

B.21

Clamping yoke connection for cross-sections up to 6 mm2

Derating curve

LPTR 5.08

PCB Terminals

LP 5.08 disconnect elements

32,6 1.283"

L1+P

0,7 0.028"

19,6 0.772"

60 50 Load current I [A]

• 0.5 - 6.0 mm2 (IEC) / 26 - 12 AWG (UL) • 500 V (IEC) / 300 V (UL) • 32 A (IEC) / 15 A (UL)

24,8 0.976"

LPTR 5.08/90 / H07V-K4.0 Disconnect element with test point, PCB terminal with proven clamping yoke connection at 5.08 mm pitch, conductor outlet direction 90°, suitable for conductor cross-sections up to 6.0 mm2.

Conductor current to EN 60947-7-1

40 30 20

min. No. of poles (1-pole)

1,3+0,1 0.051"

0 10 20 30 40 50 60 70 80 90 100 110

15,2 0.598"

Ambient temperature T [°C]

Technical data

Ordering data

V kV

Solder pin length Colour of plastic

0.13…6 0.5…6

20°C 32

3.2 mm orange

Pitch 5.08 mm PolesL1 mm (inch) 1 0.00 (0.000)

0.5…4 0.5…2.5 0.5…2.5 6 0.6 x 3.5 DIN 5264 0.5...0.6 40°C 32

III 3

III 2

II 2

250 4

500 4

a UL 1059 rated data B C D Nominal voltage V 300 300 Rated current A 15 10 AWG conductor 26-12 r CSA C22.2 rated data B C D Rated voltage V 300 300 Rated current A 15 10 AWG conductor 26-12 Material data Type of insulating material PA Flammability class acc. UL94 V-2 Contact base material Cu alloy Material of contact surface tinned Information • Additional colours on request • Rated current related to rated cross-section and min. No. of poles. • Wire end ferrule without plastic collar to DIN 46228 pt 1 • Wire end ferrule with plastic collar to DIN 46228 pt 4 • Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards.

B.22

5,5 0.217"

L1 P

Qty. 100

Order No. 1755180000

Order No.

Clamping yoke connection for cross-sections up to 6 mm2

PCB Terminals

Accessories

Possible colors Additional colours on request

Marking system See chapter accessories

Test plug See chapter accessories

Screwdriver See chapter accessories Order No. 9008390000

B.23

LPP 7.62 LPP 7.50

Derating curve

LP 7.62/90 LP 7.50/90

L1+P

0,6 0.024"

LP 7.62/90 / H07V-K4.0

• 0.5 - 6.0 mm2 (IEC) / 26 - 12 AWG (UL) • 1000 V (IEC) / 300 V (UL) • 32 A (IEC) / 20 A (UL)

20 min. No. of poles (2-pole)

5,5 0.217"

0 0

1,3+0,1 0.051"

10 20 30 40 50 60 70 80 90 100 110 Ambient temperature T [°C]

Ordering data

50 Load current I [A]

0.13…6 0.5…6 …6 0.5…4 0.5…2.5 0.5…2.5 6 0.6 x 3.5 DIN 5264 0.5...0.6

Conductor current to EN 60947-7-1

30 20 min. No. of poles (2-pole)

Solder pin length Colour of plastic

3.2 mm orange

Pitch 7.62 mm PolesL1 mm (inch) 2 7.62 (0.300) 3 15.24 (0.600)

Qty. 100 100

Order No. 1594460000 1594470000

Order No.

PolesL1 mm (inch) Qty. 2 7.50 (0.295) 100 3 15.00 (0.591) 100

Order No. 1594420000 1594430000

Order No.

10 0 0

10 20 30 40 50 60 70 80 90 100 110 Ambient temperature T [°C]

A Overvoltage category Pollution severity

20°C 32 III 3

V kV

500 6

40°C 32 III 2

II 2

500 1000 6 6

B.24

Conductor current to EN 60947-7-1

LP 7.62/180 / H07V-K4.0

Rated current at ambient temperature

Rated voltage Rated impulse voltage

17 0.669"

11 0.433"

50 Load current I [A]

This PCB terminal provides connections for 1000 V, 32 A and 6 mm2 conductor cross-section with established clamping yoke connection at 7.50 and 7.62 mm pitch, conductor outlet direction in 90° and 180° design

2,4 0.094"

PCB Terminals

Clamping yoke connection for cross-sections up to 6 mm2

Pitch 7.50 mm

Clamping yoke connection for cross-sections up to 6 mm2

Accessories PCB Terminals

LP 7.62/180 LP 7.50/180

Possible colors Additional colours on request

L1+P 17 0.669" 11 0.433"

0,7 0.026"

1 0.041"

L1 P

1,3+0,1 0.051"

Marking system See chapter accessories

Ordering data Solder pin length Colour of plastic

3.2 mm orange

Pitch 7.62 mm PolesL1 mm (inch) 2 7.62 (0.300) 3 15.24 (0.600)

Qty. 100 100

Order No. 1753890000 1753900000

Order No.

Screwdriver See chapter accessories Order No. 9008390000

Pitch 7.50 mm PolesL1 mm (inch) Qty. 2 7.50 (0.295) 100 3 15.00 (0.591) 100

Order No. 1761370000 1761380000

Order No.

B.25

LPP 7.62 LPP 7.50

Derating curve

LPP 7.62/90 LPP 7.50/90 with test point

L1+P

LP 7.62/90 / H07V-K4.0

Load current I [A]

• 0.5 - 6.0 mm2 (IEC) / 26 - 12 AWG (UL) • 1000 V (IEC) / 300 V (UL) • 32 A (IEC) / 20 A (UL)

13,4 0.528"

0,6 0.024"

50 40

17 0.669"

Test point, 1000 V, 32 A and 6 mm conductor cross-section are feasible with this PCB terminal with proven clamping yoke connection at 7.50 and 7.62 mm pitch, conductor outlet direction 135°. 2

Conductor current to EN 60947-7-1

30 2,4 0.094"

PCB Terminals

Clamping yoke connection for cross-sections up to 6 mm2

20 L1

min. No. of poles (2-pole)

1,3+0,1 0.051"

0 0

5,5 0.217"

10 20 30 40 50 60 70 80 90 100 110 Ambient temperature T [°C]

Technical data Load current I [A]

0.13…6 0.5…6 …6 0.5…4 0.5…2.5 0.5…2.5 6 0.6 x 3.5 DIN 5264 0.5...0.6

A Overvoltage category Pollution severity

Conductor current to EN 60947-7-1

30 20 min. No. of poles (2-pole)

Solder pin length Colour of plastic

3.2 mm orange

Pitch 7.62 mm PolesL1 mm (inch) 2 7.62 (0.300) 3 15.24 (0.600)

Qty. 100 100

Order No. 1594480000 1594490000

Order No.

PolesL1 mm (inch) Qty. 2 7.50 (0.295) 100 3 15.00 (0.591) 100

Order No. 1594440000 1594450000

Order No.

10 0 0

20°C 32

10 20 30 40 50 60 70 80 90 100 110

III 3 V kV

500 6

40°C 32 III 2

II 2

500 1000 6 6

B.26

Ambient temperature T [°C]

Rated current at ambient temperature

Rated voltage Rated impulse voltage

Ordering data

LP 7.62/135 / H07V-K4.0 50

Pitch 7.50 mm

Clamping yoke connection for cross-sections up to 6 mm2

Accessories PCB Terminals

LPP 7.62/135 LPP 7.50/135 with test point

Possible colors Additional colours on request L1+P

0,6 0.024"

7,7 0.304"

16,8 0.662"

17,5 0.689"

L1 P

7,5 0.293"

1,3+0,1 0.051"

Marking system See chapter accessories

Ordering data Solder pin length Colour of plastic

3.2 mm orange

Pitch 7.62 mm PolesL1 mm (inch) 2 7.62 (0.300) 3 15.24 (0.600)

Qty. 100 100

Order No. 1595790000 1595830000

Order No.

Test plug See chapter accessories

Screwdriver See chapter accessories Order No. 9008390000

Pitch 7.50 mm PolesL1 mm (inch) Qty. 2 7.50 (0.295) 100 3 15.00 (0.591) 100

Order No. 1595770000 1595810000

Order No.

B.27

LP 10.16 LP 10.00

Derating curve

LP 10.16/90 LP 10.00/90

L1+P/2

• 0.5 - 6.0 mm2 (IEC) / 26 - 12 AWG (UL) • 1000 V (IEC) / 300 V (UL) • 32 A (IEC) / 20 A (UL)

0.6 0.024"

11 0.433"

17 0.669"

50 Load current I [A]

PCB terminal with proven clamping yoke connection in 10 and 10.16 mm pitch. Conductor outlet direction 90°. Suitable for conductor cross-sections up to 6.0 mm2.

LP 10.16/90 / H07V -K4.0 min. No. of poles (2-pole)

40 30

Conductor current to EN 60947-7-1

2.4 0.094"

PCB Terminals

Clamping yoke connection for cross-sections up to 6 mm2

20 L1

5.5 0.217"

P 1.3+0.1 0.051"

0 0

10 20 30 40 50 60 70 80 90 100 110 Ambient temperature T [°C]

Technical data

Ordering data

20°C 32

PolesL1 mm (inch) 2 10.16 (0.400) 3 20.32 (0.800) 4 30.48 (1.200)

Qty. 100 50 50

Order No. 1845010000 1845020000 1845030000

Order No.

Order No. 1693650000 1693660000 1692700000

Order No.

40°C 32 III 2

II 2

630 1000 1000 8 8 8

B.28

3.2 mm orange

Pitch 10.16 mm

0.5…4 0.5…2.5 0.5…2.5 6 0.6 x 3.5 DIN 5264 0.5...0.6

III 3 V kV

Solder pin length Colour of plastic

0.13…6 0.5…6

Pitch 10.00 mm PolesL1 mm (inch) Qty. 2 10.00 (0.394) 100 3 20.00 (0.787) 50 4 30.00 (1.181) 50

Clamping yoke connection for cross-sections up to 6 mm2

PCB Terminals

Accessories

Possible colors Additional colours on request

Marking system See chapter accessories

Marking and function indicator See chapter accessories

Fuse element and disconnection element See chapter accessories

Screwdriver See chapter accessories Order No. 9008390000

B.29

Clamping yoke connection for cross-sections up to 6 mm2

Derating curve

LL 9.52/90

PCB Terminals

LL 9.52

L1 + P

LL 9.52 / H07V-K4.0

• 0.18 - 6.0 mm (IEC) / 26 - 10 AWG (UL) • 1000 V (IEC) / 300 V (UL) • 32 A (IEC) / 30 A (UL) 2

12,5 0.492"

60 min. No. of poles (2-pole) 4,8 0.189" 21,5 0.846"

50 Load current I [A]

This PCB terminal provides connections for 1000 V, 32 A and 6 mm2 conductor cross-section with established clamping yoke connection at 9.52 mm pitch, conductor outlet direction in 90° design.

0,6 0.024"

40 30 20

Conductor current to EN 60947-7-1

7,9 0.311"

max. No. of poles (24-pole)

P 1,3+0,1 0.051"

0 0 10 20 30 40 50 60 70 80 90 100 110 120 130 Ambient temperature T [°C]

Technical data

LL 9.52 / H05V-K0.5 30

A Overvoltage category Pollution severity

Load current I [A]

0.22…4 0.5…2.5 0.5…2.5 7 0.8 x 4.0 DIN 5264 0.5...0.6

min. No. of poles (2-pole)

Pitch 9.52 mm

PolesL1 mm (inch) 2 9.52 (0.375) 3 19.04 (0.750)

Conductor current to EN 60947-7-1

5 max. No. of poles (24-pole)

0 0 10 20 30 40 50 60 70 80 90 100 110 120 130

20°C 32 III 3

V kV

40°C 32 III 2

II 2

690 1000 1000 8 8 6

a UL 1059 rated data B C D Nominal voltage V 300 300 Rated current A 30 30 AWG conductor 26-10 r CSA C22.2 rated data B C D Rated voltage V 300 300 Rated current A 30 35 AWG conductor 26-10 Material data Type of insulating material Wemid (PA) Flammability class acc. UL94 V-0 Contact base material Cu alloy Material of contact surface tinned Information • Rated current related to rated cross-section and min. No. of poles. • Wire end ferrule without plastic collar to DIN 46228 pt 1 • Wire end ferrule with plastic collar to DIN 46228 pt 4 • The data given under CSA relates to a cUL approval E60693 • P on drg. = pitch • Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards.

B.30

Solder pin length Colour of plastic

Ambient temperature T [°C]

Rated current at ambient temperature

Rated voltage Rated impulse voltage

0.18…6 0.18…6

Ordering data 5.0 mm orange Qty. 100 100

Order No.

Order No. 1724680000 1724690000

Clamping yoke connection for cross-sections up to 6 mm2

PCB Terminals

Accessories

Possible colors Additional colours on request

Marking strips See chapter accessories

Screwdriver See chapter accessories Order No. 99008400000, Order No. 9008530000

B.31

Clamping yoke connection for cross-sections up to 6 mm2

Derating curve

LL2N 9.52/90

PCB Terminals

LL2N 9.52

LL2N 9.52/90 / H07V-U6

7.9 0.311" 28 1.102"

5.4

max. No. of poles (16-pole)

0.211"

P/2

L1 P

Ø 1.3 + 0.1 0.021"

100

17.5

0 120

Ambient temperature T [°C]

Technical data 0.18…6 0.18…6

Load current I [A]

0.22…4 0.5…2.5 0.5…2.5 7 0.8 x 4.0 DIN 5264 0.5...0.6

Conductor current to EN 60947-7-1

30 20

max. No. of poles (16-pole)

10 0 0

Overvoltage category Pollution severity

20°C 32

100

120

III 3 V kV

690 6

40°C 32 III 2

II 2

LL2N 9.52/90 / H05V-K0.5

690 1000 6 6

a UL 1059 rated data B C D Nominal voltage V 300 300 Rated current A 30 30 AWG conductor 26-10 r CSA C22.2 rated data B C D Rated voltage V 300 300 Rated current A 30 30 AWG conductor 26-10 Material data Type of insulating material Wemid (PA) Flammability class acc. UL94 V-0 Contact base material Cu alloy Material of contact surface tinned Information • Rated current related to rated cross-section and min. No. of poles. • Wire end ferrule without plastic collar to DIN 46228 pt 1 • Wire end ferrule with plastic collar to DIN 46228 pt 4 • The data given under CSA relates to a cUL approval E60693 • P on drg. = pitch • Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards.

25 20 Load current I [A]

B.32

Solder pin length Colour of plastic

min. No. of poles (4-pole)

Ambient temperature T [°C]

Rated current at ambient temperature

Rated voltage Rated impulse voltage

Ordering data

LL2N 9.52/90 / H07V-K4.0 50

39.1 1.539" 28.4 1.118"

21.7 0.854"

4.2 0.165"

Conductor current to EN 60947-7-1

min. No. of poles (4-pole)

15 10

max. No. of poles (16-pole)

Conductor current to EN 60947-7-1

0 0

0.689"

• 0.18 - 6.0 mm (IEC) / 26 - 10 AWG (UL) • 1000 V (IEC) / 300 V (UL) • 32 A (IEC) / 30 A (UL) 2

min. No. of poles (4-pole)

60 Load current I [A]

Multi level PCB terminal with proven clamping yoke connection in 9.52 mm pitch. Conductor outlet direction 90°. 1000 V and 6 mm2 conductor crosssection for 32 A.

P/2

L1 + P + 0.6 L1 + P + 0.024"

100

Ambient temperature T [°C]

120

5.0 mm orange

Pitch 9.52 mm PolesL1 mm (inch) 4 9.52 (3.750) 8 28.56 (11.250) 12 47.60 (18.750) 16 66.64 (26.250) 20 85.68 (33.750) 24 104.72 (41.250)

Qty. 100 100 100 100 100 100

Order No.

Order No. 1926350000 1926360000 1926370000 1926380000 1926390000 1926400000

Clamping yoke connection for cross-sections up to 6 mm2

PCB Terminals

Accessories

Possible colors Additional colours on request

Marking strips See chapter accessories

Screwdriver See chapter accessories Order No. 99008400000, Order No. 9008530000

B.33

Clamping yoke connection for cross-sections up to 10 mm2

Derating curve

GSE 10/180

PCB Terminals

GSE 10

with test point

32 1.260"

L1+P+1 19 0.748"

90 80 70 60 50 40 30 20 10 0

min. No. of poles (2-pole)

Conductor current to EN 60947-7-1

7,7 0.303" 1,6+0,1 0.063"

L1 P

20,32 0.800"

• 0.5 - 10.0 mm2 (IEC) / 26 - 8 AWG (UL) • 1000 V (IEC) / 300 V (UL) • 57 A (IEC) / 40 A (UL)

Load current I [A]

Low-profile PCB terminal for 10 mm2 conductor cross-section and 57 A, with proven clamping yoke connection at 10 mm pitch, conductor outlet direction 180°.

G S E 10 / H07V -K10

10 20 30 40 50 60 70 80 90 100 110 Ambient temperature T [°C]

Technical data

Ordering data

20°C 57 III 3

V kV

Solder pin length Colour of plastic

0.13…11 0.5…10 6…10 0.5…10 0.75…4 0.75…4 10 1.0 x 5.5 DIN 5264 1.2...1.2

400 6

Pitch 10.16 mm

40°C 57 III 2

II 2

500 1000 6 6

a UL 1059 rated data B C D Nominal voltage V 300 150 300 Rated current A 40 40 10 AWG conductor 26-8 r CSA C22.2 rated data B C D Rated voltage V 300 300 Rated current A 40 10 AWG conductor 26-8 Material data Type of insulating material PA Flammability class acc. UL94 V-2 Contact base material E-Cu Material of contact surface tinned Information • Additional colours on request • Rated current related to rated cross-section and min. No. of poles. • Wire end ferrule without plastic collar to DIN 46228 pt 1 • Wire end ferrule with plastic collar to DIN 46228 pt 4 • P on drg. = pitch • Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards.

B.34

4.5 mm grey

PolesL1 mm 1 0.00 2 10.16 3 20.32 4 30.48 5 40.64 6 50.80 7 60.96 8 71.12 9 81.28 10 91.44

(inch) (0.000) (0.400) (0.800) (1.200) (1.600) (2.000) (2.400) (2.800) (3.200) (3.600)

Qty. 50 20 20 20 20 20 20 20 20 20

Order No.

Order No. 0478700000 9954140000 0478900000 1610220000 1761410000 9954160000 9958370000 9954170000 9958380000 9954180000

Clamping yoke connection for cross-sections up to 10 mm2

PCB Terminals

Accessories

Marking system See chapter accessories

Test plug See chapter accessories

Screwdriver See chapter accessories Order No. 9008410000

B.35

Clamping yoke connection for cross-sections up to 16 mm2

Derating curve

LU 10.16/90

PCB Terminals

LU 10.16

L1+P

LU 10.16/90 / H07V-K16

• 0.5 - 16.0 mm2 (IEC) / 26 - 6 AWG (UL) • 1000 V (IEC) / 300 V (UL) • 76 A (IEC) / 65 A (UL)

28.5 1.122"

Conductor current to EN 60947-7-1

max. No. of poles (10-pole) L1 P

100

120

0.14…16 0.5…16 6…16 0.5…16 2.5…10 2.5…10 12 1.0 x 5.5 DIN 5264 1.2...1.5

A Overvoltage category Pollution severity

20°C 76 III 3

V kV

690 6

Load current I [A]

690 1000 6 4

a UL 1059 rated data B C D Nominal voltage V 300 150 300 Rated current A 65 65 10 AWG conductor 26-6 r CSA C22.2 rated data B C D Rated voltage V 300 150 300 Rated current A 65 65 10 AWG conductor 22-6 Material data Type of insulating material Wemid (PA) Flammability class acc. UL94 V-0 Contact base material E-Cu Material of contact surface tinned Information • Additional colours on request • Rated current related to rated cross-section and min. No. of poles. • Wire end ferrule without plastic collar to DIN 46228 pt 1 • Wire end ferrule with plastic collar to DIN 46228 pt 4 • P on drg. = pitch • Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards.

B.36

15 max. No. of poles (10-pole)

10 5

Conductor current to EN 60947-7-1

II 2

4.5 mm grey

Pitch 10.16 mm

40°C 76 III 2

Solder pin length Colour of plastic

min. No. of poles (2-pole)

100

Ambient temperature T [°C]

Rated current at ambient temperature

Rated voltage Rated impulse voltage

Ordering data

LU 10.16/90 / H05V-K0.5 30

6.5 0.255"

1.6+0.1 0.063"

Ambient temperature T [°C]

Technical data

18.3 0.720"

0.6 0.024"

min. No. of poles (2-pole)

Load current I [A]

This PCB terminal provides connections for 76 A and 16 mm2 conductor cross-section with established clamping yoke connection at 10.16 mm pitch, conductor outlet direction in 90° design

110 100 90 80 70 60 50 40 30 20 10 0

10.16 0.400"

120

PolesL1 mm 2 10.16 3 20.32 4 30.48 5 40.64 6 50.80 7 60.96 8 71.12 9 81.28 10 91.44

(inch) (0.400) (0.800) (1.200) (1.600) (2.000) (2.400) (2.800) (3.200) (3.600)

Qty. 20 20 20 20 20 20 20 20 20

Order No.

Order No. 1648310000 1648300000 9956390000 9956400000 9956410000 9956420000 9956430000 9956440000 9956450000

Clamping yoke connection for cross-sections up to 16 mm2

PCB Terminals

Accessories

Possible colors Additional colours on request

Marking strips See chapter accessories

Marking system See chapter accessories

Screwdriver See chapter accessories Order No. 9008410000

B.37

Clamping yoke connection for cross-sections up to 16 mm2

Derating curve

LUP 10.16/90

PCB Terminals

LUP 10.16

with test point

L1+P

LUP 10.16/90 / H07V-K16

• 0.5 - 16.0 mm2 (IEC) / 26 - 6 AWG (UL) • 1000 V (IEC) / 300 V (UL) • 76 A (IEC) / 58 A (UL)

100

120

Ordering data

30 25

Solder pin length Colour of plastic

Pitch 10.16 mm

min. No. of poles (2-pole)

Load current I [A]

15 max. No. of poles (9-pole)

10 5

Conductor current to EN 60947-7-1

0 0

Overvoltage category Pollution severity

20°C 76 III 3

V kV

40°C 72 III 2

II 2

800 1000 1000 8 8 6

a UL 1059 rated data B C D Nominal voltage V 300 300 300 Rated current A 58 58 10 AWG conductor 26-6 r CSA C22.2 rated data B C D Rated voltage V 300 300 300 Rated current A 58 58 10 AWG conductor 22-6 Material data Type of insulating material Wemid (PA) Flammability class acc. UL94 V-0 Contact base material E-Cu Material of contact surface tinned Information • Additional colours on request • Rated current related to rated cross-section and min. No. of poles. • Wire end ferrule without plastic collar to DIN 46228 pt 1 • Wire end ferrule with plastic collar to DIN 46228 pt 4 • The data given under CSA relates to a cUL approval E60693 • P on drg. = pitch • Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards.

11.1 0.439"

1.6+0.1 0.063"

Ambient temperature T [°C]

0.13…16 0.5…16 6…16 0.5…16 2.5…10 2.5…10 12 1.0 x 5.5 DIN 5264 1.2...1.5

25.1 0.987"

31.5 1.240"

L1 P

100

Ambient temperature T [°C]

B.38

max. No. of poles (9-pole)

LUP 10.16/90 / H05V-K0.5

Rated current at ambient temperature

Rated voltage Rated impulse voltage

Conductor current to EN 60947-7-1

0.8 0.031"

min. No. of poles (2-pole)

Load current I [A]

This PCB terminal provides connections for 1000 V, test point, 76 A and 16 mm2 conductor crosssection with established clamping yoke connection at 10.16 mm pitch, conductor outlet direction in 90° design

110 100 90 80 70 60 50 40 30 20 10 0

10.16 0.400"

120

PolesL1 mm 2 10.16 3 20.32 4 30.48 5 40.64 6 50.80 7 60.96 8 71.12 9 81.28

(inch) (0.400) (0.800) (1.200) (1.600) (2.000) (2.400) (2.800) (3.200)

3.2 mm grey Qty. 20 20 20 20 20 20 20 20

Order No.

Order No. 1839270000 1839280000 1839290000 1839300000 1839310000 1839320000 1839330000 1839340000

Clamping yoke connection for cross-sections up to 16 mm2

PCB Terminals

Accessories

Possible colors Additional colours on request

Marking strips See chapter accessories

Marking system See chapter accessories

Test plug See chapter accessories

Screwdriver See chapter accessories Order No. 9008410000

B.39

Clamping yoke connection for cross-sections up to 16 mm2

Derating curve

LUP 12.7/90

PCB Terminals

LUP 12.7

with test point

L1+P

LUP 12.7/90 / H07V-K16

• 0.5 - 16.0 mm2 (IEC) / 26 - 6 AWG (UL) • 1000 V (IEC) / 600 V (UL) • 76 A (IEC) / 58 A (UL)

0.8 0.031"

Conductor current to EN 60947-7-1

max. No. of poles (9-pole) P

100

120

0.13…16 0.5…16 6…16 0.5…16 2.5…10 2.5…10 12 1.0 x 5.5 DIN 5264 1.2...1.5

A Overvoltage category Pollution severity

20°C 76 III 3

V kV

Load current I [A]

1000 1000 1000 8 8 6

a UL 1059 rated data B C D Nominal voltage V 600 600 600 Rated current A 58 58 5 AWG conductor 26-6 r CSA C22.2 rated data B C D Rated voltage V 600 600 600 Rated current A 58 58 5 AWG conductor 22-6 Material data Type of insulating material Wemid (PA) Flammability class acc. UL94 V-0 Contact base material E-Cu Material of contact surface tinned Information • Additional colours on request • Rated current related to rated cross-section and min. No. of poles. • Wire end ferrule without plastic collar to DIN 46228 pt 1 • Wire end ferrule with plastic collar to DIN 46228 pt 4 • The data given under CSA relates to a cUL approval E60693 • P on drg. = pitch • Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards.

B.40

15 max. No. of poles (9-pole)

10 5

Conductor current to EN 60947-7-1

II 2

3.2 mm grey

Pitch 12.70 mm

40°C 76 III 2

Solder pin length Colour of plastic

min. No. of poles (2-pole)

100

Ambient temperature T [°C]

Rated current at ambient temperature

Rated voltage Rated impulse voltage

Ordering data

LUP 12.7/90 / H05V-K0.5 30

11.1 0.439"

1.6+0.1 0.063"

Ambient temperature T [°C]

Technical data

25.1 0.987"

31.5 1.240"

min. No. of poles (2-pole)

Load current I [A]

This PCB terminal provides connections for 1000 V, 76 A and 16 mm2 conductor cross-section with established clamping yoke connection at 12.7 mm pitch, conductor outlet direction in 90° design

110 100 90 80 70 60 50 40 30 20 10 0

10.16 0.400"

120

PolesL1 mm 2 12.70 3 25.40 4 38.10 5 50.80 6 63.50 7 76.20 8 88.90 9 101.60

(inch) (0.500) (1.000) (1.500) (2.000) (2.500) (3.000) (3.500) (4.000)

Qty. 20 20 20 20 20 20 20 20

Order No.

Order No. 1839180000 1839190000 1839200000 1839210000 1839220000 1839230000 1839240000 1839250000

Clamping yoke connection for cross-sections up to 16 mm2

PCB Terminals

Accessories

Possible colors Additional colours on request

Marking strips See chapter accessories

Marking system See chapter accessories

Test plug See chapter accessories

Screwdriver See chapter accessories Order No. 9008410000

B.41

Clamping yoke connection for cross-sections up to 25 mm2

LX 15.00

Derating curve

PCB Terminals

LX 15.00/90 with test point

LX 15.00/90 / H07V-K25

• 1.5 - 25 mm2 (IEC) / 16 - 4 AWG (UL) • 1000 V (IEC) / 600 V (UL) • 101 A (IEC) / 85 A (UL)

160 140 120 100 80 60 40 20 0

37 1.457"

100

3.8 0.15"

120

Ambient temperature T [°C]

40 Load current I [A]

Ø 1.6 + 0.1 0.063"

Solder pin length Colour of plastic

min. No. of poles (2-pole)

1.31…25 1.5…16 6…25 1.5…25 1.5…16 1.5…16 16 1.0 x 5.5 DIN 5264 2...4

13.5 0.531"

Ordering data

LX 15.00/90 / H07V-K1.5

4.5 mm grey

30 20 Conductor current to EN 60947-7-1

10 0 0

100

120

Ambient temperature T [°C]

Rated current at ambient temperature A Overvoltage category Pollution severity

20°C 101 III 3

V kV

40°C 101 III 2

II 2

1000 1000 1000 8 8 6

a UL 1059 rated data B C D Nominal voltage V 600 600 600 Rated current A 85 85 5 AWG conductor 16-4 r CSA C22.2 rated data B C D Rated voltage V 600 600 600 Rated current A 85 85 5 AWG conductor 16-4 Material data Type of insulating material Wemid (PA) Flammability class acc. UL94 V-0 Contact base material E-Cu Material of contact surface tinned Information • Additional colours on request • Rated current related to rated cross-section and min. No. of poles. • Wire end ferrule without plastic collar to DIN 46228 pt 1 • Wire end ferrule with plastic collar to DIN 46228 pt 4 • P on drg. = pitch • Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards.

B.42

L1 P

29.1 1.144"

Conductor current to EN 60947-7-1

Technical data

Rated voltage Rated impulse voltage

L1 + 13 L1 + 0.512"

min. No. of poles (2-pole)

Load current I [A]

Power, 101 A, 1000 V and 25 mm2 conductor cross-section are feasible with this heavy-duty PCB terminal with proven clamping yoke connection at 15.00 mm pitch, conductor outlet direction 90°, test point.

12.5 0.492"

Pitch 15.00 mm PolesL1 mm 1 0.00 2 15.00 3 30.00 4 45.00 5 60.00 6 75.00 7 90.00 8 105.00

(inch) Qty. (0.000) 20 (0.591) 20 (1.181) 20 (1.772) 20 (2.362) 20 (2.953) 10 (3.543) 10 (4.134) 10

Order No.

Order No. 1783660000 1783670000 1783680000 1783690000 1806460000 1809870000 1919100000 1809880000

Clamping yoke connection for cross-sections up to 25 mm2

Notes PCB Terminals

Accessories

LX 15.00 The PCB connection terminal for 25 mm2 (AWG 4) enables PCB connections for 101 A (IEC) or 85 A (UL). The spacing of 15.00 mm enables operation in systems up to 1000 V (IEC) or 600 V (UL 1059 groups B and C). Notes on installation: Possible colors Additional colours on request

When connecting conductors with a cross-section of up to 25 mm2 / AWG 4, the torque can exert considerable forces on the PCB. In order to accommodate such forces, Weidm端ller has devised a version with a flange fixing in addition to the standard model. If required, the PCB connection terminals can be screwed to the PCB or the enclosure via the flanges.

Here are two examples to show how this works:

Marking strips See chapter accessories

Example 1 - LX 15.00 without fixing flanges. In the vicinity of the LX 15.00 the PCB is supported on posts which are screwed to the PCB and affixed to the device enclosure.

Marking system See chapter accessories

Test plug See chapter accessories

Example 2 - LX 15.00 with fixing flanges. Slits are cut in the PCB at the positions of the LX 15.00 fixing flanges. The flanges are subsequently screwed to the PCB or the device enclosure using screws and posts.

Screwdriver See chapter accessories Order No. 9008410000

B.43

Clamping yoke connection for cross-sections up to 25 mm2

LX 15.00

Derating curve

PCB Terminals

LXB 15.00/90 with fixing flange and test point

L1 + 45 L1 + 1.772" L1 + 13 L1 + 0.512"

LX 15.00/90 / H07V-K25

• 1.5 - 25 mm2 (IEC) / 16 - 4 AWG (UL) • 1000 V (IEC) / 600 V (UL) • 101 A (IEC) / 85 A (UL)

37 1.457" 11 0.433"

100

L1 17 0.669"

Ø 1.6 + 0.1 0.063"

3.8 0.15"

Ordering data Solder pin length Colour of plastic

40 Load current I [A]

13.5 0.531"

Ø 5.5 + 0.1 0.217"

min. No. of poles (2-pole)

1.31…25 1.5…16 6…25 1.5…25 1.5…16 1.5…16 16 1.0 x 5.5 DIN 5264 2...4

120

Ambient temperature T [°C]

LX 15.00/90 / H07V-K1.5

4.5 mm grey

30 20 Conductor current to EN 60947-7-1

10 0 0

100

120

Ambient temperature T [°C]

Rated current at ambient temperature A Overvoltage category Pollution severity

20°C 101 III 3

V kV

40°C 101 III 2

II 2

1000 1000 1000 8 8 6

B.44

Rated voltage Rated impulse voltage

Conductor current to EN 60947-7-1

Technical data

29.1 1.144"

min. No. of poles (2-pole)

Load current I [A]

Fitted with flange for accommodating forces and fixing to PCB. 101 A, 1000 V and 25 mm2 conductor cross-section are possible with this PCB terminal. Proven clamping yoke connection at 15.00 mm pitch, conductor outlet direction 90°, test pick-off

160 140 120 100 80 60 40 20 0

12.5 0.492"

Pitch 15.00 mm PolesL1 mm 2 15.00 3 30.00 4 45.00 5 60.00 6 75.00 7 90.00 8 105.00

(inch) Qty. (0.591) 20 (1.181) 20 (1.772) 20 (2.362) 20 (2.953) 10 (3.543) 10 (4.134) 10

Order No.

Order No. 1783710000 1783720000 1783730000 1806470000 1783740000 1925720000 1783750000

Clamping yoke connection for cross-sections up to 25 mm2

Notes

with fixing flange and test point LX 15.00 The PCB connection terminal for 25 mm2 (AWG 4) enables PCB connections for 101 A (IEC) or 85 A (UL). The spacing of 15.00 mm enables operation in systems up to 1000 V (IEC) or 600 V (UL 1059 groups B and C).

PCB Terminals

Accessories LXBL 15.00/1/90

Notes on installation: Possible colors Additional colours on request 29 1.142" 13 0.512" 37 1.457"

29.1 1.144"

17 0.669"

13.5 0.531" 12.5 0.492"

11 0.433"

4.5 0.177" 3.8 0.149"

When connecting conductors with a cross-section of up to 25 mm2 / AWG 4, the torque can exert considerable forces on the PCB. In order to accommodate such forces, Weidmüller has devised a version with a flange fixing in addition to the standard model. If required, the PCB connection terminals can be screwed to the PCB or the enclosure via the flanges. Here are two examples to show how this works:

Ø 1.6 + 0.1 0.063"

Marking strips

Ø 5.5 + 0.1 0.217"

See chapter accessories

Example 1 - LX 15.00 without fixing flanges. In the vicinity of the LX 15.00 the PCB is supported on posts which are screwed to the PCB and affixed to the device enclosure.

Ordering data Solder pin length Colour of plastic

4.5 mm grey

Marking system See chapter accessories

Test plug See chapter accessories

Pitch 15.00 mm PolesL1 mm (inch) Qty. 1 0.00 (0.000) 20

Order No.

Order No. 1783700000

Screwdriver See chapter accessories Order No. 9008410000

B.45

TOP connection

Derating curve

LPA TOP 1/90

PCB Terminals

LPA-TOP

L1+P 0,6 0.024"

LPA TOP 90 / H07V-K2.5

• 0.5 - 2.5 mm (IEC) / 26 - 14 AWG (UL) • 500 V (IEC) / 300 V (UL) • 24 A (IEC) / 10 A (UL) 2

17,1 0.674"

30 Load current I [A]

Conductor entry and screw connection in the same direction on this PCB terminal with 5.08 mm pitch for conductor cross-sections up to 2.5 mm2. Conductor outlet direction 90° and 180°.

Conductor current to EN 60947-7-1

25 20 15

8,9 0.350"

min. No. of poles (2-pole)

1,3+0,1 0.051"

0 10 20 30 40 50 60 70 80 90 100 110

5,08 0.200"

Ambient temperature T [°C]

Technical data

LPA TOP 180 / H07V-K2.5

A Overvoltage category Pollution severity Rated voltage Rated impulse voltage

30 Load current I [A]

0.13…2.5 0.5…2.5 0.5…2.5 0.5…1.5 0.5…1.5 13 0.6 x 3.5 DIN 5264 0.4...0.5

V kV

20°C 24

10 min. No. of poles (2-pole)

III 3

III 2

II 2

250 4

320 4

500 4

Solder pin length Colour of plastic PolesL1 mm (inch) 2 5.08 (0.200) 3 10.16 (0.400)

40°C 23

Ordering data 3.2 mm orange

Pitch 5.08 mm

a UL 1059 rated data B C D Nominal voltage V 300 300 Rated current A 10 10 AWG conductor 26-14 r CSA C22.2 rated data B C D Rated voltage V 300 300 Rated current A 10 10 AWG conductor 26-14 Material data Type of insulating material PA Flammability class acc. UL94 V-2 Contact base material Cu alloy Material of contact surface tinned Information • Additional colours on request • Rated current related to rated cross-section and min. No. of poles. • Wire end ferrule without plastic collar to DIN 46228 pt 1 • Wire end ferrule with plastic collar to DIN 46228 pt 4 • P on drg. = pitch • Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards.

B.46

Conductor current to EN 60947-7-1

10 20 30 40 50 60 70 80 90 100 110 Ambient temperature T [°C]

Rated current at ambient temperature

21,6 0.850"

Qty. 100 100

Order No. 1535260000 1535360000

Order No.

TOP connection

Accessories PCB Terminals

LPA TOP 1/180

Possible colors Additional colours on request L1+P 0,6 0.024"

21,6 0.850"

17,1 0.674"

9,2 0.362"

L1 P

1,3+0,1 0.051"

5,08 0.200"

Marking system See chapter accessories

Ordering data Solder pin length Colour of plastic

3.2 mm orange

Pitch 5.08 mm PolesL1 mm (inch) 2 5.08 (0.200) 3 10.16 (0.400)

Qty. 100 100

Order No. 1534860000 1534960000

Order No.

Screwdriver See chapter accessories Order No. 9008390000

B.47

TOP connection

Derating curve

TOP 1.5GS/90-5.08

PCB Terminals

TOP 1.5 GS - 5.08

L1+P 2,5 1,8 0.071" 0.096"

TOP 1.5GS 5.08/90 / H07V-K2.5

• 0.5 - 2.5 mm (IEC) / 26 - 14 AWG (UL) • 630 V (IEC) / 300 V (UL) • 24 A (IEC) / 10 A (UL) 2

18,5 0.728"

Conductor current to EN 60947-7-1

25 20 15

9,3 0.366"

1,3+0,1 0.051"

min. No. of poles (2-pole)

5 0

10 20 30 40 50 60 70 80 90 100 110

5,08 0.200"

Ambient temperature T [°C]

Technical data

TOP 1.5GS 5.08/180 / H07V-K2.5

A Overvoltage category Pollution severity Rated voltage Rated impulse voltage

30 Load current I [A]

0.13…2.5 0.5…2.5 0.5…2.5 0.5…2.5 0.5…2.5 10 0.6 x 3.5 DIN 5264 0.4...0.5

V kV

20°C 24

15 10 min. No. of poles (2-pole)

0 0

40°C 21

III 3

III 2

II 2

250 2.5

320 2.5

630 2.5

Ordering data Solder pin length Colour of plastic

3.5 mm orange

Pitch 5.08 mm

a UL 1059 rated data B C D Nominal voltage V 300 300 Rated current A 10 10 AWG conductor 26-14 r CSA C22.2 rated data B C D Rated voltage V 300 300 Rated current A 10 10 AWG conductor 26-14 Material data Type of insulating material PA Flammability class acc. UL94 V-2 Contact base material CuZn Material of contact surface tinned Information • Additional colours on request • Rated current related to rated cross-section and min. No. of poles. • Wire end ferrule without plastic collar to DIN 46228 pt 1 • Wire end ferrule with plastic collar to DIN 46228 pt 4 • Crimp form A for wire end ferrules with PZ 6/5 crimping tool are recommended for the largest cable sizes. • P on drg. = pitch • Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards.

B.48

Conductor current to EN 60947-7-1

10 20 30 40 50 60 70 80 90 100 110 Ambient temperature T [°C]

Rated current at ambient temperature

19,5 0.768"

30 Load current I [A]

Conductor entry and screw connection in the same direction on this PCB terminal with 5.08 mm pitch for conductor cross-sections up to 2.5 mm2. Conductor outlet direction 90° and 180°.

(inch) (0.200) (0.400) (0.600) (0.800) (1.000) (1.200) (1.400) (1.600) (1.800) (2.000) (2.200) (2.400) (2.600) (2.800) (3.000) (3.200) (3.400) (3.600) (3.800) (4.000) (4.200) (4.400) (4.600)

Qty. 100 100 50 50 50 50 50 50 50 50 50 50 50 50 20 20 20 10 10 10 10 10 10

Order No.

Order No. 0641960000 0642060000 0642160000 1578820000 0593860000 0593960000 0594060000 0594160000 0642260000 0594260000 0594360000 0594460000 0594560000 0594660000 0642360000 0594760000 1707040000 0594960000 0595060000 0595160000 0595260000 0595360000 0595460000

TOP connection

Accessories PCB Terminals

TOP 1.5GS/180-5.08

Possible colors Additional colours on request L1+P 1,8 2,5 0.071" 0.096"

19,5 0.768"

18,5 0.728"

9,3 0.366"

L1 P

1,3+0,1 0.051"

5,08 0.200"

Fixing block See chapter accessories

Ordering data Solder pin length Colour of plastic

4.5 mm orange

(inch) (0.200) (0.400) (0.600) (0.800) (1.000) (1.200) (1.400) (1.600) (1.800) (2.000) (2.200) (2.400) (2.600) (2.800) (3.000) (3.200) (3.400) (3.600) (3.800) (4.000) (4.200) (4.400) (4.600)

Qty. 100 100 50 50 50 50 25 20 20 20 20 20 20 20 20 20 20 20 20 10 10 10 10

Order No.

Order No. 0569960000 0570160000 0570360000 0597360000 0597460000 1695700000 0597660000 1474660000 0570560000 1474760000 0597960000 1724740000 0598160000 1782490000 0570760000 0598360000 0598460000 0598560000 0598660000 0598760000 0598860000 0598960000 0599060000

Marking system See chapter accessories

Screwdriver See chapter accessories Order No. 9008390000

B.49

TOP connection

Derating curve

TOP 1.5GS/90-5.08 Ex e

PCB Terminals

TOP 1.5GS 5.08 EX

L1+P 2,5 1,8 0.071" 0.096"

TOP 1.5GS 5.08/90 / H07V-K2.5

18,5 0.728"

Conductor current to EN 60947-7-1

25 20 15

9,3 0.366"

1,3+0,1 0.051"

min. No. of poles (2-pole)

• 1.5 mm2 / 14 AWG • 176 V • 12 A

0 10 20 30 40 50 60 70 80 90 100 110

5,08 0.200"

Ambient temperature T [°C]

Technical data

TOP 1.5GS 5.08/180 / H07V-K2.5

Load current I [A]

15 10 min. No. of poles (2-pole)

0 0

40°C

A III 3

III 2

II 2

V kV

Rated data Ex e - DEMKO 03 ATEX 134439 U Rated voltage V 176 Rated current A 12 2/ Clamping range mm /AWG 0.13...1.5 / 26...14 r CSA C22.2 rated data B C D Rated voltage V Rated current A AWG conductor Material data Type of insulating material PA Flammability class acc. UL94 V-2 Contact base material CuZn Material of contact surface tinned Information • P on drg. = pitch • Service temperature range: see EC type examination certificate / IEC Ex-Certificate of Conformity • Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards.

Ordering data Solder pin length Colour of plastic

3.5 mm orange

Pitch 5.08 mm

0.6 x 3.5 DIN 5264 0.4...0.5 20°C

Overvoltage category Pollution severity

B.50

Conductor current to EN 60947-7-1

10 20 30 40 50 60 70 80 90 100 110 Ambient temperature T [°C]

Rated current at ambient temperature

Rated voltage Rated impulse voltage

19,5 0.768"

30 Load current I [A]

For potentially explosive areas, conductor entry and screw connection in one direction, PCB terminal in 5.08 mm pitch for conductor cross-sections up to 1.5 mm2, conductor outlet direction 90° or 180°.

PolesL1 mm 2 5.08 3 10.16 4 15.24 5 20.32 6 25.40 7 30.48 8 35.56 9 40.64 10 45.72 11 50.80 12 55.88

(inch) (0.200) (0.400) (0.600) (0.800) (1.000) (1.200) (1.400) (1.600) (1.800) (2.000) (2.200)

Qty. 100 100 50 50 50 50 50 50 50 50 50

Order No.

Order No. 1850120000 1850130000 1850140000 1850150000 1850160000 1850170000 1850180000 1850190000 1850200000 1850210000 1850220000

TOP connection

Accessories

Note

Ex e / ATEX

Fixing block See chapter accessories L1+P 1,8 2,5 0.071" 0.096" 19,5 0.768"

18,5 0.728"

9,3 0.366"

L1 P

1,3+0,1 0.051"

5,08 0.200"

Marking system See chapter accessories

Ordering data Solder pin length Colour of plastic

The old Explosive Atmospheres and Gassy Mines Directive 76/117/EEC was superseded by the new directive 94/9/EC, also known as ATEX 95 (ATEX: ATmosphère EXplosive = potentially explosive atmosphere), on 1 July 2003. Only the new directive is now valid, which is one of the so-called “New Approach” directives. It applies in all the countries of the European Union plus Iceland, Liechtenstein and Norway. In all these countries the directive applies to the sale and operation of products that have been specially developed for use in potentially explosive atmospheres in which gases, vapours, mists or dusts prevail. A new development is the inclusion of mining operations and purely mechanical devices. The ATEX directive had been in force since March 1996, but its use up until 30 June 2003 (transitionary period) was optional and existing directives remained applicable as well. Since 1 July 2003 all new installations and equipment for use in potentially explosive areas must comply with the ATEX directive and be certified accordingly, however the previous breakdown into zones (Zone 0, 1 or 2) and classes of protection (e.g. “i”: intrinsic safety, “e”: increased safety) is still applicable.

4.5 mm orange

Pitch 5.08 mm PolesL1 mm 2 5.08 3 10.16 4 15.24 5 20.32 6 25.40 7 30.48 8 35.56 9 40.64 10 45.72 11 50.80 12 55.88

(inch) (0.200) (0.400) (0.600) (0.800) (1.000) (1.200) (1.400) (1.600) (1.800) (2.000) (2.200)

Qty. 100 100 50 50 50 50 25 20 20 20 20

Order No.

Order No. 1850230000 1850240000 1850250000 1850260000 1850270000 1850280000 1850290000 1850300000 1850310000 1850320000 1850330000

Screwdriver See chapter accessories Order No. 9008390000

B.51

PCB Terminals

TOP 1.5GS/180-5.08 Ex e

TOP connection

Derating curve

TOP 1.5GS/90-7.62

PCB Terminals

TOP 1.5 GS - 7.62

TOP 1.5GS 7.62/90 / H07V-K2.5

• 0.5 - 2.5 mm (IEC) / 26 - 14 AWG (UL) • 1000 V (IEC) / 300 V (UL) • 24 A (IEC) / 10 A (UL) 2

18,5 0.728"

Conductor current to EN 60947-7-1

25 20 15

9,3 0.366"

min. No. of poles (2-pole)

1,3+0,1 0.051"

5 0 10 20 30 40 50 60 70 80 90 100 110

5,08 0.200"

Ambient temperature T [°C]

Technical data

TOP 1.5GS 7.62/180 / H07V-K2.5

A Overvoltage category Pollution severity Rated voltage Rated impulse voltage

30 Load current I [A]

0.13…2.5 0.5…2.5 0.5…2.5 0.5…2.5 0.5…2.5 10 0.6 x 3.5 DIN 5264 0.4...0.5 20°C 24

15 10

min. No. of poles (2-pole)

0 0

III 3 V kV

400 4

40°C 21 III 2

II 2

630 1000 4 4

Ordering data Solder pin length Colour of plastic

3.5 mm orange

Pitch 7.62 mm

a UL 1059 rated data B C D Nominal voltage V 300 300 Rated current A 10 10 AWG conductor 26-14 r CSA C22.2 rated data B C D Rated voltage V 300 300 Rated current A 10 10 AWG conductor 26-14 Material data Type of insulating material PA Flammability class acc. UL94 V-2 Contact base material CuZn Material of contact surface tinned Information • Additional colours on request • Rated current related to rated cross-section and min. No. of poles. • Wire end ferrule without plastic collar to DIN 46228 pt 1 • Wire end ferrule with plastic collar to DIN 46228 pt 4 • Crimp form A for wire end ferrules with PZ 6/5 crimping tool are recommended for the largest cable sizes. • P on drg. = pitch • Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards.

B.52

Conductor current to EN 60947-7-1

10 20 30 40 50 60 70 80 90 100 110 Ambient temperature T [°C]

Rated current at ambient temperature

19,5 0.768"

30 Load current I [A]

Conductor entry and screw connection in the same direction on this PCB terminal with 7.62 mm pitch for conductor cross-sections up to 2.5 mm2. Conductor outlet direction 90° and 180°.

L1+5,08 L1+0.2" 1,8 2,5 0.071" 0.096"

PolesL1 mm 2 7.62 3 15.24 4 22.86 5 30.48 6 38.10 7 45.72 8 53.34 9 60.96 10 68.58 11 76.20 12 83.82

(inch) (0.300) (0.600) (0.900) (1.200) (1.500) (1.800) (2.100) (2.400) (2.700) (3.000) (3.300)

Qty. 100 100 50 25 20 20 20 20 20 20 20

Order No.

Order No. 0393360000 0393460000 0393560000 0393660000 1683990000 1647310000 0642460000 0393960000 0642560000 0394060000 0394160000

TOP connection

Accessories PCB Terminals

TOP 1.5GS/180-7.62

Possible colors Additional colours on request

L1+5,08 L1+0.2" 2,5 0.096"

18, 5 0.728" 19,5 0768"

1,8 0.071"

9,3 0.366"

L1 P 1,3+0,1 0.051"

5,08 0.200"

Fixing block See chapter accessories

Ordering data Solder pin length Colour of plastic

4.5 mm orange

Pitch 7.62 mm PolesL1 mm 2 7.62 3 15.24 4 22.86 5 30.48 6 38.10 7 45.72 8 53.34 9 60.96 10 68.58 11 76.20 12 83.82

(inch) (0.300) (0.600) (0.900) (1.200) (1.500) (1.800) (2.100) (2.400) (2.700) (3.000) (3.300)

Qty. 100 50 50 25 25 25 20 20 20 20 20

Order No.

Order No. 0391360000 0391460000 0391560000 1490460000 1597060000 1597070000 0570960000 1597080000 0571160000 1597090000 0392160000

Marking system See chapter accessories

Screwdriver See chapter accessories Order No. 9008390000

B.53

TOP connection

Derating curve

TOP 1.5GS/90-7.62 Ex e

PCB Terminals

TOP 1.5GS 7.62 EX

TOP 1.5GS 7.62/90 / H07V-K2.5

18,5 0.728"

Conductor current to EN 60947-7-1

25 20 15

9,3 0.366"

min. No. of poles (2-pole)

1,3+0,1 0.051"

• 1.5 mm2 / 14 AWG • 275 V • 12 A

0 10 20 30 40 50 60 70 80 90 100 110

5,08 0.200"

Ambient temperature T [°C]

Technical data

TOP 1.5GS 7.62/180 / H07V-K2.5

Load current I [A]

15 10

min. No. of poles (2-pole)

0 0

40°C

A III 3

III 2

II 2

V kV

Rated data Ex e - DEMKO 03 ATEX 134439 U Rated voltage V 275 Rated current A 12 2/ Clamping range mm /AWG 0.13...1.5 / 26...14 r CSA C22.2 rated data B C D Rated voltage V Rated current A AWG conductor Material data Type of insulating material PA Flammability class acc. UL94 V-2 Contact base material CuZn Material of contact surface tinned Information • P on drg. = pitch • Service temperature range: see EC type examination certificate / IEC Ex-Certificate of Conformity • Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards.

Ordering data Solder pin length Colour of plastic

3.5 mm orange

Pitch 7.62 mm

0.6 x 3.5 DIN 5264 0.4...0.5 20°C

Overvoltage category Pollution severity

B.54

Conductor current to EN 60947-7-1

10 20 30 40 50 60 70 80 90 100 110 Ambient temperature T [°C]

Rated current at ambient temperature

Rated voltage Rated impulse voltage

19,5 0.768"

30 Load current I [A]

For potentially explosive areas, conductor entry and screw connection in one direction, PCB terminal in 7.62 mm pitch for conductor cross-sections up to 1.5 mm2, conductor outlet direction 90° or 180°.

L1+5,08 L1+0.2" 1,8 2,5 0.071" 0.096"

PolesL1 mm 2 7.62 3 15.24 4 22.86 5 30.48 6 38.10 7 45.72 8 53.34 9 60.96 10 68.58 11 76.20 12 83.82

(inch) (0.300) (0.600) (0.900) (1.200) (1.500) (1.800) (2.100) (2.400) (2.700) (3.000) (3.300)

Qty. 100 100 50 25 20 20 20 20 20 20 20

Order No.

Order No. 1850340000 1850350000 1850360000 1850370000 1850380000 1850390000 1850400000 1850410000 1850420000 1850430000 1850440000

TOP connection

Accessories

Note

Ex e / ATEX

Fixing block See chapter accessories L1+5,08 L1+0.2" 2,5 0.096"

18, 5 0.728" 19,5 0768"

1,8 0.071"

9,3 0.366"

L1 P 1,3+0,1 0.051"

5,08 0.200"

Marking system See chapter accessories

Ordering data Solder pin length Colour of plastic

4.5 mm orange

Pitch 7.62 mm PolesL1 mm 2 7.62 3 15.24 4 22.86 5 30.48 6 38.10 7 45.72 8 53.34 9 60.96 10 68.58 11 76.20 12 83.82

(inch) (0.300) (0.600) (0.900) (1.200) (1.500) (1.800) (2.100) (2.400) (2.700) (3.000) (3.300)

Qty. 100 50 50 25 25 25 20 20 20 20 20

Order No.

Order No. 1850450000 1850460000 1850470000 1850480000 1850490000 1850500000 1850510000 1850520000 1850530000 1850540000 1850550000

Screwdriver See chapter accessories Order No. 9008390000

B.55

PCB Terminals

TOP 1.5GS/180-7.62 Ex e

TOP connection

Derating curve

TOP 4GS/90-6.35

PCB Terminals

TOP 4 GS - 6.35

L1+P 1,5 0.059"

TOP 4GS 6.35/90 / H07V-K4.0

• 0.5 - 6.0 mm (IEC) / 26 - 10 AWG (UL) • 320 V (IEC) / 300 V (UL) • 32 A (IEC) / 30 A (UL) 2

26 1.024"

60 Load current I [A]

Conductor entry and screw connection in the same direction on this PCB terminal with 6.35 mm pitch for conductor cross-sections up to 6.0 mm2. Conductor outlet direction 90° and 180°.

26 1.024"

50 Conductor current to EN 60947-7-1

40 30

10,56 0.416"

1,3+0,1 0.051"

min. No. of poles (2-pole)

10,16 0.400"

10 0 0

10 20 30 40 50 60 70 80 90 100 110 Ambient temperature T [°C]

Technical data

TOP 4GS 6.35/180 / H07V-K2.5

Load current I [A]

0.13…6 0.5…6 0.5…4 0.5…4 0.5…4 13 0.6 x 3.5

A Overvoltage category Pollution severity

15 10 min. No. of poles (2-pole)

0 0.5...0.6

V kV

20°C 32

0 40°C 32

III 3

III 2

II 2

320 2.5

Ordering data Solder pin length Colour of plastic

3.5 mm orange

Pitch 6.35 mm

a UL 1059 rated data B C D Nominal voltage V 300 300 Rated current A 30 10 AWG conductor 26-10 r CSA C22.2 rated data B C D Rated voltage V 300 300 Rated current A 30 10 AWG conductor 26-10 Material data Type of insulating material PA Flammability class acc. UL94 V-2 Contact base material E-Cu Material of contact surface tinned Information • Additional colours on request • Rated current related to rated cross-section and min. No. of poles. • Wire end ferrule without plastic collar to DIN 46228 pt 1 • Wire end ferrule with plastic collar to DIN 46228 pt 4 • P on drg. = pitch • Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards.

B.56

Conductor current to EN 60947-7-1

10 20 30 40 50 60 70 80 90 100 110 Ambient temperature T [°C]

Rated current at ambient temperature

Rated voltage Rated impulse voltage

PolesL1 mm 2 6.35 3 12.70 4 19.05 5 25.40 6 31.75 7 38.10 8 44.45 9 50.80 10 57.15 11 63.50 12 69.85

(inch) (0.250) (0.500) (0.750) (1.000) (1.250) (1.500) (1.750) (2.000) (2.250) (2.500) (2.750)

Qty. 100 100 50 50 50 50 50 50 50 50 50

Order No.

Order No. 1401760000 1650300000 1786030000 1786040000 1786050000 1786060000 1667910000 1786070000 1786080000 1786090000 1786100000

TOP connection

Accessories PCB Terminals

TOP 4GS/180-6.35

Possible colors Additional colours on request

L1+P 1,5 0.059"

26 1.024"

9,8 0.386"

L1 P

10,16 0.400"

1,3+0,1 0.051"

Marking system See chapter accessories

Ordering data Solder pin length Colour of plastic

3.5 mm orange

Pitch 6.35 mm PolesL1 mm 2 6.35 3 12.70 4 19.05 5 25.40 6 31.75 7 38.10 8 44.45 9 50.80 10 57.15 11 63.50 12 69.85

(inch) (0.250) (0.500) (0.750) (1.000) (1.250) (1.500) (1.750) (2.000) (2.250) (2.500) (2.750)

Qty. 100 100 50 50 50 50 50 50 50 50 50

Order No.

Order No. 1786190000 1786200000 1786210000 1786220000 1786230000 1786240000 1786250000 1786260000 1786270000 1786280000 1786290000

Screwdriver See chapter accessories Order No. 9008390000

B.57

TOP connection

Derating curve

TOP 4GS/90-7.62

PCB Terminals

TOP 4 GS - 7.62

L1+P

• 0.5 - 6.0 mm (IEC) / 26 - 10 AWG (UL) • 1000 V (IEC) / 300 V (UL) • 32 A (IEC) / 30 A (UL) 2

26 1.024"

60 Load current I [A]

Conductor entry and screw connection in the same direction on this PCB terminal with 7.62 mm pitch for conductor cross-sections up to 6.0 mm2. Conductor outlet direction 90° and 180°.

1,5 0.059"

TOP 4GS 7.62/90 / H07V-K4.0 50 Conductor current to EN 60947-7-1

40 30

11 0.433"

1,3+0,1 0.051"

min. No. of poles (2-pole) 10,16 0.400"

10 0 0

10 20 30 40 50 60 70 80 90 100 110 Ambient temperature T [°C]

Technical data

TOP 4GS 7.62/180 / H07V-K2.5

Load current I [A]

0.5…4 0.5…4 0.5…4 13 0.6 x 3.5 DIN 5264 0.5...0.6

A Overvoltage category Pollution severity

20°C 32 III 3

V kV

500 4

III 2

II 2

630 1000 4 4

B.58

Conductor current to EN 60947-7-1

min. No. of poles (2-pole)

40°C 32

Ordering data Solder pin length Colour of plastic

10 20 30 40 50 60 70 80 90 100 110 Ambient temperature T [°C]

Rated current at ambient temperature

Rated voltage Rated impulse voltage

0.13…6 0.5…6

40 35 30 25 20 15 10 5 0

3.5 mm orange

Pitch 7.62 mm PolesL1 mm 2 7.62 3 15.24 4 22.86 5 30.48 6 38.10 7 45.72 8 53.34 9 60.96 10 68.58 11 76.20 12 83.82

(inch) (0.300) (0.600) (0.900) (1.200) (1.500) (1.800) (2.100) (2.400) (2.700) (3.000) (3.300)

Qty. 50 50 50 50 50 50 50 50 50 50 50

Order No.

Order No. 0289660000 0289760000 0290160000 1698740000 1786410000 1647300000 1786420000 1786430000 1786440000 1759860000 1786450000

TOP connection

Accessories PCB Terminals

TOP 4GS/180-7.62

Possible colors Additional colours on request

L1+P 26 1.024"

26 1.024"

1,5 0.059"

9,8 0.386"

L1 P

10,16 0.400"

1,3+0,1 0.051"

Marking system See chapter accessories

Ordering data Solder pin length Colour of plastic

3.5 mm orange

Pitch 7.62 mm PolesL1 mm 2 7.62 3 15.24 4 22.86 5 30.48 6 38.10 7 45.72 8 53.34 9 60.96 10 68.58 11 76.20 12 83.82

(inch) (0.300) (0.600) (0.900) (1.200) (1.500) (1.800) (2.100) (2.400) (2.700) (3.000) (3.300)

Qty. 50 50 50 50 50 50 50 50 50 50 50

Order No.

Order No. 0298360000 0298460000 0298560000 1786540000 1494560000 1786550000 1786560000 1571700000 1786570000 1786580000 1749170000

Screwdriver See chapter accessories Order No. 9008390000

B.59

Leaf spring connection

PS 3.5

Derating curve

PCB Terminals

PS 3.5/90

L1+P

PS 3.50 / H07V-K1.5

• 0.2 - 1.5 mm (IEC) / 28 - 16 AWG (UL) • 320 V (IEC) / 300 V (UL) • 17.5 A (IEC) / 10 A (UL) 2

30 min. No. of poles (2-pole)

25 Load current I [A]

Very small and compact PCB terminal with leaf spring connection in 3.5 mm pitch, with a conductor outlet direction 90° and suitable for conductor cross-sections up to 1.5 mm2.

0,5 0,5 0.020" 0.020"

Conductor current to EN 60947-7-1

20 15 10

max. No. of poles (24-pole)

1,3+0,1 0.051"

Ambient temperature T [°C]

Technical data Load current I [A]

0.08…1.5 0.2…1.5 0.2…1.5 0.25…0.75 0.25…0.75 4 0.4 x 2.5 DIN 5264 0.2...0.25

A Overvoltage category Pollution severity

3.5 mm black

min. No. of poles (2-pole)

Conductor current to EN 60947-7-1

max. No. of poles (24-pole)

0 10 20 30 40 50 60 70 80 90 100 110 120 130

V kV

20°C 17.5

40°C 17.5

III 3

III 2

II 2

160 2.5

320 2.5

a UL 1059 rated data B C D Nominal voltage V 300 300 Rated current A 10 10 AWG conductor 28-16 r CSA C22.2 rated data B C D Rated voltage V 300 Rated current A 10 AWG conductor 28-16 Material data Type of insulating material Wemid (PA) Flammability class acc. UL94 V-0 Contact base material Cu alloy Material of contact surface tinned Information • Rated current related to rated cross-section and min. No. of poles. • Wire end ferrule without plastic collar to DIN 46228 pt 1 • Wire end ferrule with plastic collar to DIN 46228 pt 4 • The data given under CSA relates to a cUL approval E60693 • P on drg. = pitch • Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards.

B.60

Solder pin length Colour of plastic

Ambient temperature T [°C]

Rated current at ambient temperature

Rated voltage Rated impulse voltage

Ordering data

PS 3.50 / H05V-K0.5 20 18 16 14 12 10 8 6 4 2 0

3,4 0.134"

0 0 10 20 30 40 50 60 70 80 90 100 110 120 130

6,8 0.268" 8,4 0.331"

Pitch 3.50 mm PolesL1 mm 2 3.50 3 7.00 4 10.50 5 14.00 6 17.50 7 21.00 8 24.50 9 28.00 10 31.50 11 35.00 12 38.50

(inch) Qty. (0.138) 100 (0.276) 100 (0.413) 100 (0.551) 100 (0.689) 100 (0.827) 100 (0.965) 100 (1.102) 100 (1.240) 100 (1.378) 100 (1.516) 100

Order No.

Order No. 1811180000 1811190000 1811200000 1811210000 1811220000 1811230000 1811240000 1811250000 1811260000 1811270000 1811280000

Leaf spring connection

PCB Terminals

Accessories

Possible colors Additional colours on request

Marking strips See chapter accessories

Screwdriver See chapter accessories Order No. 9008370000, Order No. 9008520000

B.61

PM 5.08 PM 5.00

Derating curve

PM 5.08/90 PM 5.00/90

PCB terminal with leaf spring connection in 5.00 and 5.08 mm pitch. Conductor outlet direction 90°. Suitable for conductor cross-sections up to 2.5 mm2.

• 0.13 - 2.5 mm2 (IEC) / 26 - 14 AWG (UL) • 600 V (IEC) / 300 V (UL) • 24 A (IEC) / 15 A (UL)

Load current I [A]

PM 5.00/5.08 / H07V-K2.5 45 40 35 30 25 20 15 10 5 0

L1+P+1 L1+P

min. No. of poles (2-pole) Conductor current to EN 60947-7-1

3,8 0.148"

L1 max. No. of poles (24-pole)

8 0.315" 10 0.394"

PCB Terminals

Leaf spring connection

P 1,3+0,1 0.051"

0 10 20 30 40 50 60 70 80 90 100 110 120 130 Ambient temperature T [°C]

Technical data

PM 5.00/5.08 / H05V-K0.5

Load current I [A]

0.13…2.5 0.25…1.5 0.25…1.5 6 0.6 x 3.5 DIN 5264 0.4...0.5

A Overvoltage category Pollution severity

Solder pin length Colour of plastic

3.5 mm black

Pitch 5.08 mm Conductor current to EN 60947-7-1

PolesL1 mm (inch) 2 5.08 (0.200) 3 10.16 (0.400)

Qty. 500 500

Order No.

Order No. 1760510000 1760520000

PolesL1 mm (inch) Qty. 2 5.00 (0.197) 500 3 10.00 (0.394) 500

Order No.

Order No. 1791630000 1791640000

max. No. of poles (24-pole)

0 10 20 30 40 50 60 70 80 90 100 110 120 130

V kV

20°C 24

40°C 24

III 3

III 2

II 2

250 4

600 4

a UL 1059 rated data B C D Nominal voltage V 300 300 Rated current A 15 10 AWG conductor 26-14 r CSA C22.2 rated data B C D Rated voltage V 300 300 Rated current A 15 10 AWG conductor 26-14 Material data Type of insulating material Wemid (PA) Flammability class acc. UL94 V-0 Contact base material Cu alloy Material of contact surface tinned Information • Rated current related to rated cross-section and min. No. of poles. • Wire end ferrule without plastic collar to DIN 46228 pt 1 • Wire end ferrule with plastic collar to DIN 46228 pt 4 • The data given under CSA relates to a cUL approval E60693 • P on drg. = pitch • Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards.

B.62

min. No. of poles (2-pole)

Ordering data

Ambient temperature T [°C]

Rated current at ambient temperature

Rated voltage Rated impulse voltage

0.13…2.5 0.13…2.5

24 22 20 18 16 14 12 10 8 6 4 2 0

Pitch 5.00 mm

Leaf spring connection

PCB Terminals

Accessories

Possible colors Additional colours on request

Marking strips See chapter accessories

Screwdriver See chapter accessories Order No. 9008390000, Order No. 9008520000

B.63

Tension clamp connection

LMZF 5.00/5.08

Derating curve

PCB Terminals

LMZF 5.0X/135

45 40 35 30 25 20 15 10 5 0

min. No. of poles (2-pole)

3.9 0.152"

max. No. of poles (24-pole)

100

0.13…2.5 0.25…1.5 0.25…1.5 6 0.4 x 2.5 DIN 5264-A

Load current I [A]

0.13…2.5 0.13…2.5

3.7 0.144"

5 0.197"

Ø 1.3 + 0.1 0.051"

120

Ambient temperature T [°C]

Ordering data

LMZF 5.0x/135 / H05V-K0.5

14.5 0.571"

Conductor current to EN 60947-7-1

Technical data 16 14 12 10 8 6 4 2 0

Solder pin length Colour of plastic

3.5 mm black

min. No. of poles (2-pole)

max. No. of poles (24-pole) Conductor current to EN 60947-7-1

100

120

Ambient temperature T [°C]

Rated current at ambient temperature A Overvoltage category Pollution severity Rated voltage Rated impulse voltage

L1 + P + 2.5 L1 + P + 0.098"

5 0.197"

• 0.13 - 2.5 mm2 (IEC) / 26 - 14 AWG (UL) • 630 V (IEC) / 300 V (UL) • 24 A (IEC) / 15 A (UL)

Load current I [A]

LMZF 5.0x/135 / H07V-K2.5 PCB terminal with tension clamp connection in 5.00 (5.08) mm pitch. Conductor outlet direction 135°. Suitable for conductor cross-sections up to 2.5 mm2. Also available with lever for opening the clamping point.

13 0.511"

5.9 0.233"

without operating lever

V kV

20°C 24

40°C 24

III 3

III 2

II 2

250 4

320 4

630 4

a UL 1059 rated data B C D Nominal voltage V 300 300 Rated current A 15 10 AWG conductor 26-14 r CSA C22.2 rated data B C D Rated voltage V 300 300 Rated current A 20 10 AWG conductor 26-14 Material data Type of insulating material Wemid (PA) Flammability class acc. UL94 V-0 Contact base material E-Cu Material of contact surface tinned Information • Rated current related to rated cross-section and min. No. of poles. • Wire end ferrule without plastic collar to DIN 46228 pt 1 • Wire end ferrule with plastic collar to DIN 46228 pt 4 • The data given under CSA relates to a cUL approval E60693 • P on drg. = pitch • Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards.

Pitch 5.0X mm PolesL1 mm 2 5.00 3 10.00 4 15.00 5 20.00 6 25.00 7 30.00 8 35.00 9 40.00 10 45.00 11 50.00 12 55.00 13 60.00 14 65.00 15 70.00 16 75.00 17 80.00 18 85.00 19 90.00 20 95.00 21 100.00 22 105.00 23 110.00 24 115.00

(inch) Qty. (0.197) 100 (0.394) 100 (0.591) 100 (0.787) 100 (0.984) 100 (1.181) 100 (1.378) 100 (1.575) 100 (1.772) 100 (1.969) 100 (2.165) 100 (2.362) 100 (2.559) 100 (2.756) 100 (2.953) 100 (3.150) 50 (3.346) 50 (3.543) 50 (3.740) 50 (3.937) 50 (4.134) 50 (4.331) 50 (4.528) 50

Order No.

Order No. 1811840000 1811850000 1811860000 1811870000 1811880000 1811890000 1811900000 1811910000 1811920000 1811930000 1811940000 1959760000 1959770000 1959780000 1959790000 1959800000 1921410000 1959820000 1959830000 1959840000 1959850000 1959860000 1959870000

Adjust the pitch by pulling or pushing the ends of the terminal. Terminal supplied with 5.00 mm pitch.

B.64

Tension clamp connection

Accessories PCB Terminals

LMZFL 5.0X/135 with operating lever

Possible colors Additional colours on request

17.4 0.684" L1 + P + 2.9 L1 + P + 0.110"

4.1 0.159" Ă&#x2DC; 1.3 + 0.1 0.051"

5 0.197" 14.5 0.571"

5 0.197"

16.7 0.659"

5.9 0.233" 3.9 0.152"

15.6 0.614"

Marking strips See chapter accessories

Ordering data Solder pin length Colour of plastic

3.5 mm black

Screwdriver See chapter accessories Order No. 9008330000

Order No.

Order No. 1811510000 1811520000 1811530000 1811540000 1811550000 1811560000 1811570000 1811580000 1811590000 1811600000 1811610000 1957720000 1957730000 1957740000 1957750000 1957760000 1957770000 1957790000 1957810000 1957840000 1957860000 1957870000 1957890000

Adjust the pitch by pulling or pushing the ends of the terminal. Terminal supplied with 5.00 mm pitch.

B.65

Tension clamp connection

LMZF 7.50/7.62

Derating curve

PCB Terminals

LMZF 7.50/135 without lever

3.9

max. No. of poles (12-pole)

100

0.13…2.5 0.25…1.5 0.25…1.5 6 0.6 x 3.5 DIN 5264-A

Load current I [A]

0.13…2.5 0.13…2.5

Ø 1.3 + 0.1 0.051"

5 0.197"

120

Ambient temperature T [°C]

Ordering data

LMZF 7.xx/135 / H05V-K0.5

6.2 0.242"

0.152"

14.5 0.571" 13 0.511"

Conductor current to EN 60947-7-1

Technical data 20 18 16 14 12 10 8 6 4 2 0

min. No. of poles (2-pole)

Solder pin length Colour of plastic

3.5 mm black

max. No. of poles (12-pole) Conductor current to EN 60947-7-1

100

120

Ambient temperature T [°C]

Rated current at ambient temperature A Overvoltage category Pollution severity Rated voltage Rated impulse voltage

L1 + P + 2.5 L1 + P + 0.098"

min. No. of poles (2-pole)

5.9 0.233"

40 35 30 25 20 15 10 5 0

5 0.197"

• 0.13 - 2.5 mm2 (IEC) / 26 - 14 AWG (UL) • 1000 V (IEC) / 300 V (UL) • 24 A (IEC) / 15 A (UL)

Load current I [A]

LMZF 7.xx/135 / H07V-K2.5 PCB terminal with tension clamp connection in 7.50 (7.62) mm pitch. Conductor outlet direction 135°. Suitable for conductor cross-sections up to 2.5 mm2. Also available with lever for opening the clamping point.

20°C 24 III 3

V kV

400 6

40°C 24 III 2

II 2

800 1000 6 6

a UL 1059 rated data B C D Nominal voltage V 300 150 300 Rated current A 15 15 10 AWG conductor 26-14 r CSA C22.2 rated data B C D Rated voltage V 300 150 300 Rated current A 15 15 10 AWG conductor 26-14 Material data Type of insulating material Wemid (PA) Flammability class acc. UL94 V-0 Contact base material E-Cu Material of contact surface tinned Information • Rated current related to rated cross-section and min. No. of poles. • Wire end ferrule without plastic collar to DIN 46228 pt 1 • Wire end ferrule with plastic collar to DIN 46228 pt 4 • The data given under CSA relates to a cUL approval E60693 • P on drg. = pitch • Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards.

Pitch 7.50 mm PolesL1 mm 2 7.50 3 15.00 4 22.50 5 30.00 6 37.50 7 45.00 8 52.50 9 60.00 10 67.50 11 75.00 12 82.50

(inch) Qty. (0.295) 100 (0.591) 100 (0.886) 100 (1.181) 50 (1.476) 50 (1.772) 50 (2.067) 50 (2.362) 50 (2.657) 50 (2.953) 50 (3.248) 50

Order No.

Order No. 1952240000 1952250000 1952260000 1952270000 1952280000 1952290000 1952300000 1952310000 1952320000 1952330000 1952340000

Pitch spacing can be adjusted by pulling and pushing the series of poles. Supplied with 7.50 mm pitch.

B.66

Tension clamp connection

Accessories PCB Terminals

LMZFL 7.50/135 with lever

Possible colors Additional colours on request

5.9 0.233" 6.6 0.258"

Ă&#x2DC; 1.3 + 0.1 0.051" 5 0.197"

16.7 0.659"

L1 + P + 2.9 L1 + P + 0.110"

3.9 0.152"

17.4 0.684" 15.6 0.614"

5 0.197" 14.5 0.571"

Marking strips P

See chapter accessories

Ordering data Solder pin length Colour of plastic

3.5 mm black

Screwdriver See chapter accessories Order No. 9008330000

Pitch 7.50 mm PolesL1 mm 2 7.50 3 15.00 4 22.50 5 30.00 6 37.50 7 45.00 8 52.50 9 60.00 10 67.50 11 75.00 12 82.50

(inch) Qty. (0.295) 100 (0.591) 100 (0.886) 100 (1.181) 50 (1.476) 50 (1.772) 50 (2.067) 50 (2.362) 50 (2.657) 50 (2.953) 50 (3.248) 50

Order No.

Order No. 1952680000 1952690000 1952700000 1952710000 1952720000 1952730000 1952740000 1952750000 1952760000 1952770000 1952780000

Pitch spacing can be adjusted by pulling and pushing the series of poles. Supplied with 7.50 mm pitch.

B.67

Tension clamp connection

LMZF 10.00/10.16

Derating curve

PCB Terminals

LMZF 10.XX/135 without operating lever

Conductor current to EN 60947-7-1

3.9

14.5 0.571" 13 0.511"

L1 + P + 2.5 L1 + P + 0.098"

min. No. of poles (2-pole)

5.9 0.233"

40 35 30 25 20 15 10 5 0

8.7 0.341"

0.152"

max. No. of poles (12-pole) L1

5 0.197" Ø 1.3 + 0.1 0.051" 5 0.197"

• 0.13 - 2.5 mm2 (IEC) / 26 - 14 AWG (UL) • 1000 V (IEC) / 300 V (UL) • 24 A (IEC) / 15 A (UL)

Load current I [A]

LMZF 10.xx/135 / H07V-K2.5 PCB terminal with tension clamp connection in 10 (10.16) mm pitch. Conductor outlet direction 135°. Suitable for conductor cross-sections up to 2.5 mm2. Also available with lever for opening the clamping point.

100

120

Ambient temperature T [°C] P

Technical data

0.13…2.5 0.25…1.5 0.25…1.5 6 0.6 x 3.5 DIN 5264-A

Load current I [A]

0.13…2.5 0.13…2.5

20 18 16 14 12 10 8 6 4 2 0

min. No. of poles (2-pole)

Solder pin length Colour of plastic

3.5 mm black

max. No. of poles (12-pole) Conductor current to EN 60947-7-1

100

120

Ambient temperature T [°C]

Rated current at ambient temperature A Overvoltage category Pollution severity Rated voltage Rated impulse voltage

Ordering data

LMZF 10.xx/135 / H05V-K0.5

20°C 24 III 3

V kV

40°C 24 III 2

II 2

500 1000 1000 8 8 8

Pitch 10.XX mm PolesL1 mm 2 10.00 3 20.00 4 30.00 5 40.00 6 50.00 7 60.00 8 70.00 9 80.00 10 90.00 11 100.00 12 110.00

(inch) Qty. (0.394) 100 (0.787) 100 (1.181) 100 (1.575) 100 (1.969) 100 (2.362) 100 (2.756) 100 (3.150) 100 (3.543) 100 (3.937) 100 (4.331) 100

Order No.

Order No. 1953120000 1953130000 1953140000 1953150000 1953160000 1953170000 1953180000 1953190000 1953200000 1953210000 1953220000

Pitch spacing can be adjusted by pulling and pushing the series of poles. Supplied with 10 mm pitch.

B.68

Tension clamp connection

Accessories PCB Terminals

LMZFL 10.XX/135 with operating lever

Possible colors Additional colours on request

9.1 0.356"

Ă&#x2DC; 1.3 + 0.1 0.051" 5 0.197"

16.7 0.659"

5.9 0.233" 3.9 0.152"

17.4 0.684" 15.6 0.614"

L1 + P + 2.9 L1 + P + 0.110"

5 0.197" 14.5 0.571"

Marking strips See chapter accessories

Ordering data Solder pin length Colour of plastic

3.5 mm black

Screwdriver See chapter accessories Order No. 9008330000

Pitch 10.XX mm PolesL1 mm 2 10.00 3 20.00 4 30.00 5 40.00 6 50.00 7 60.00 8 70.00 9 80.00 10 90.00 11 100.00 12 110.00

(inch) Qty. (0.394) 100 (0.787) 100 (1.181) 100 (1.575) 100 (1.969) 100 (2.362) 100 (2.756) 100 (3.150) 100 (3.543) 100 (3.937) 100 (4.331) 100

Order No.

Order No. 1953580000 1953590000 1953600000 1953610000 1953620000 1953630000 1953640000 1953650000 1953660000 1953670000 1953680000

Pitch spacing can be adjusted by pulling and pushing the series of poles. Supplied with 10 mm pitch.

B.69

Tension clamp connection

Derating curve

LM2NZF 5.08

PCB Terminals

LMZF 5.08 multiple level

2-row

• 0.2 - 2.5 mm (IEC) / 24 - 14 AWG (UL) • 630 V (IEC) / 300 V (UL) • 15 A (IEC) / 10 A (UL) 2

L1 + 6.78

24.05 0.947"

Conductor current to EN 60947-7-1

25.6 1.008"

L1 + 0.267"

6.76 0.266" 17.93 0.706"

Multi level PCB terminal with tension clamp connection in 5.08 mm pitch. Conductor outlet direction 135°. Suitable for conductor cross-sections up to 2.5 mm2.

Load current I [A]

LM2NZF 5.08/135 / H07V-K1.5 18 16 14 12 10 8 6 4 2 0

min. No. of poles (4-pole) L1 P

P/2

4.81 0.189" Ø 1.3 + 0.1 0.051"

4.65 0.183"

15.24 0.6"

10 20 30 40 50 60 70 80 90 100 110 Ambient temperature T [°C]

LM3RZF 5.08/135 / H07V-K1.5

0.2…1.5 0.25…1.5 0.25…1.5 7.5 0.6 x 3.5 DIN 5264-A

Overvoltage category Pollution severity

Conductor current to EN 60947-7-1

V kV

20°C 15

40°C 13

III 3

III 2

II 2

250 4

320 4

630 4

Ordering data Solder pin length Colour of plastic

3.5 mm orange

Pitch 5.08 mm Min. number of poles (6-poles)

a UL 1059 rated data B C D Nominal voltage V 300 300 Rated current A 10 10 AWG conductor 24-14 r CSA C22.2 rated data B C D Rated voltage V 300 300 Rated current A 10 10 AWG conductor 24-14 Material data Type of insulating material PA Flammability class acc. UL94 V-2 Contact base material Cu alloy Material of contact surface tinned Information • Rated current related to rated cross-section and min. No. of poles. • Wire end ferrule without plastic collar to DIN 46228 pt 1 • Wire end ferrule with plastic collar to DIN 46228 pt 4 • P on drg. = pitch • Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards.

B.70

18 16 14 12 10 8 6 4 2 0

10 20 30 40 50 60 70 80 90 100 110 Ambient temperature T [°C]

Rated voltage Rated impulse voltage

0.13…2.5 0.2…2.5

Load current I [A]

Technical data

PolesL1 mm 4 5.08 6 10.16 8 15.24 10 20.32 12 25.40 14 30.48 16 35.56 18 40.64 20 45.72 22 50.80 24 55.88 26 60.96 28 66.04 30 71.12 32 76.20 34 81.28 36 86.36

(inch) (0.200) (0.400) (0.600) (0.800) (1.000) (1.200) (1.400) (1.600) (1.800) (2.000) (2.200) (2.400) (2.600) (2.800) (3.000) (3.200) (3.400)

Qty. 50 50 50 50 50 20 20 20 20 20 10 10 10 10 10 10 10

Order No.

Order No. 1764810000 1764820000 1764830000 1764840000 1764850000 1764860000 1764870000 1764880000 1758020000 1764890000 1764900000 1782500000 1782510000 1782520000 1782530000 1782540000 1782550000

Tension clamp connection

Accessories PCB Terminals

LM3RZF 5.08 Triple level

Marking strips See chapter accessories

32.2 1.268"

2.27 0.089" 15.24 10.16 0.6" 0.4"

L1 P P/2

36.6 1.441"

6.76 0.266" 17.63 0.706"

29.16 1.148"

L1 + 6.78 L1 + 0.267"

4.65 0.183" Ă&#x2DC; 1.3 + 0.1 0.051"

Screwdriver See chapter accessories Order No. 9008330000

Ordering data Solder pin length Colour of plastic

3.5 mm orange

Pitch 5.08 mm PolesL1 mm 6 5.08 9 10.16 12 15.24 15 20.32 18 25.40 21 30.48 24 35.56 27 40.64 30 45.72 33 50.80 36 55.88 48 76.20

(inch) (0.200) (0.400) (0.600) (0.800) (1.000) (1.200) (1.400) (1.600) (1.800) (2.000) (2.200) (3.000)

Qty. 50 50 50 20 20 20 10 10 10 10 10 10

Order No.

Order No. 1764910000 1764920000 1764930000 1764940000 1764950000 1758040000 1764960000 1764970000 1758030000 1764980000 1764990000 1758050000

B.71

Spade connection

PCF 5.00

Derating curve

P CF 5.00/90 / H07V -K2.5

6 0.236" 14.9 0.585"

min. No. of poles (2-pole)

25 Conductor current to EN 60947-7-1

2.5 0.098" 9.8 0.386"

15 10

L1 5 0.197

• 630 V (IEC) / 300 V (UL) • 24 A (IEC) / 15 A (UL)

L1+4.8 L1+0.189"

35 Load current I [A]

Spade connection in 90°, 135° and 180° conductor outlet direction for 6.3 and 2.8 mm spade crimps at 5.00 mm pitch

2.8 0.110"

5 0 0

10 20 30 40 50 60 70 80 90 100 110

1.3+0.1 0.051"

Ambient temperature T [°C]

Technical data

P CF 5.00/135 / H07V -K2.5

Load current I [A]

Solder pin length Colour of plastic

3.5 mm orange

25 Conductor current to EN 60947-7-1

20 15 10 5 0 0

V kV

20°C 24

10 20 30 40 50 60 70 80 90 100 110

40°C 24

III 3

III 2

II 2

250 4

320 4

630 4

a UL 1059 rated data B C D Nominal voltage V 150 300 Rated current A 15 10 AWG conductor r CSA C22.2 rated data B C D Rated voltage V 150 300 Rated current A 15 10 AWG conductor Material data Type of insulating material PA Flammability class acc. UL94 V-2 Contact base material CuSn Material of contact surface tinned Information • Rated current related to rated cross-section and min. No. of poles. • Rated voltages with insulating sleeves IH 6.3 or IH 2.8 • P on drg. = pitch • Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards.

P CF 5.00/180 / H07V -K2.5 35 Load current I [A]

Overvoltage category Pollution severity

B.72

min. No. of poles (2-pole)

Ordering data

Ambient temperature T [°C]

Rated voltage Rated impulse voltage

6.3 0.248"

PCB Terminals

PCF 5.00/90

min. No. of poles (2-pole)

30 25 Conductor current to EN 60947-7-1

20 15 10 5 0 0

10 20 30 40 50 60 70 80 90 100 110 Ambient temperature T [°C]

Pitch 5.00 mm PolesL1 mm 2 5.00 3 10.00 4 15.00 5 20.00 6 25.00 7 30.00 8 35.00 9 40.00 10 45.00 11 50.00 12 55.00 13 60.00 14 65.00 15 70.00 16 75.00 17 80.00 18 85.00 19 90.00

(inch) Qty. (0.197) 100 (0.394) 100 (0.591) 100 (0.787) 100 (0.984) 100 (1.181) 50 (1.378) 50 (1.575) 50 (1.772) 50 (1.969) 50 (2.165) 50 (2.362) 50 (2.559) 50 (2.756) 50 (2.953) 50 (3.150) 50 (3.346) 50 (3.543) 50

Order No.

Order No. 9511410000 9511420000 9511430000 9511440000 9511450000 9511460000 9511470000 9511480000 9511490000 9511500000 9511510000 9511520000 9511530000 9511540000 9511550000 9511560000 9511570000 9511580000

Spade connection

Accessories PCF 5.00/180

PCB Terminals

PCF 5.00/135

Marking strips

6 0.236" 17.9 0.703"

6.0 0.236"

L1+4.8 L1+0.189"

2.4 9.8 0.094" 0.386"

L1 P

2.5 0.098" 5 0.197"

5 0.197"

Ordering data 3.5 mm orange

Pitch 5.00 mm (inch) Qty. (0.197) 100 (0.394) 100 (0.591) 100 (0.787) 100 (0.984) 100 (1.181) 50 (1.378) 50 (1.575) 50 (1.772) 50 (1.969) 50 (2.165) 50 (2.362) 50 (2.559) 50 (2.756) 50 (2.953) 50 (3.150) 50 (3.346) 50 (3.543) 50

Crimping tool See chapter accessories

Ordering data

Solder pin length Colour of plastic

PolesL1 mm 2 5.00 3 10.00 4 15.00 5 20.00 6 25.00 7 30.00 8 35.00 9 40.00 10 45.00 11 50.00 12 55.00 13 60.00 14 65.00 15 70.00 16 75.00 17 80.00 18 85.00 19 90.00

9.8 0.386"

1.3+0.1 0.051"

14.9 0.585"

3 " 6. 8 24 0. 2.8 0" 11 0.

L1+4.8 L1+0.189"

See chapter accessories

6.3 0.248" 2.8 0.110"

Solder pin length Colour of plastic

3.5 mm orange

Pitch 5.00 mm Order No.

Order No. 9511790000 9511800000 9511810000 9511820000 9511830000 9511840000 9511850000 9511860000 9511870000 9511880000 9511890000 9511900000 9511910000 9511920000 9511930000 9511940000 9511950000 9511960000

PolesL1 mm 2 5.00 3 10.00 4 15.00 5 20.00 6 25.00 7 30.00 8 35.00 9 40.00 10 45.00 11 50.00 12 55.00 13 60.00 14 65.00 15 70.00 16 75.00 17 80.00 18 85.00 19 90.00

Order No.

Order No. 9500410000 9500420000 9500430000 9500440000 9500450000 9500460000 9500470000 9500480000 9500490000 9500510000 9500520000 9500530000 9500540000 9500550000 9500560000 9500570000 9500580000 9500590000

B.73

Spade connection

PCF 7.50

Derating curve

min. No. of poles (2-pole)

2.8 0.110"

L1+4.8 L1+0.189"

Conductor current to EN 60947-7-1

20 15

5 0.197

Load current I [A]

• 1000 V (IEC) / 300 V (UL) • 24 A (IEC) / 15 A (UL)

6.3 0.248"

P CF 7.50/90 / H07V -K2.5 Spade connection in 90°, 135° and 180° conductor outlet direction for 6.3 and 2.8 mm spade crimps at 7.50 mm pitch

6.0 0.236"

14.9 0.585"

PCB Terminals

PCF 7.50/90

5 0 0

2.5 0.098" 9.8 0.386"

1.3+0.1 0.051"

10 20 30 40 50 60 70 80 90 100 110 Ambient temperature T [°C]

Technical data

P CF 7.50/135 / H07V -K2.5

Load current I [A]

Solder pin length Colour of plastic

3.5 mm orange

25 Conductor current to EN 60947-7-1

20 15 10 5 0 0

20°C 24

10 20 30 40 50 60 70 80 90 100 110

III 3 V kV

500 6

40°C 24 III 2

II 2

P CF 7.50/180 / H07V -K2.5

690 1000 6 6

a UL 1059 rated data B C D Nominal voltage V 300 150 300 Rated current A 15 15 10 AWG conductor r CSA C22.2 rated data B C D Rated voltage V 300 150 300 Rated current A 15 15 10 AWG conductor Material data Type of insulating material PA Flammability class acc. UL94 V-2 Contact base material CuSn Material of contact surface tinned Information • Rated current related to rated cross-section and min. No. of poles. • Rated voltages with insulating sleeves IH 6.3 or IH 2.8 • P on drg. = pitch • Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards.

35 Load current I [A]

Overvoltage category Pollution severity

B.74

min. No. of poles (2-pole)

Ordering data

Ambient temperature T [°C]

Rated voltage Rated impulse voltage

min. No. of poles (2-pole)

30 25 Conductor current to EN 60947-7-1

20 15 10 5 0 0

10 20 30 40 50 60 70 80 90 100 110 Ambient temperature T [°C]

Pitch 7.50 mm PolesL1 mm 2 7.50 3 15.00 4 22.50 5 30.00 6 37.50 7 45.00 8 52.50 9 60.00 10 67.50 11 75.00 12 82.50 13 90.00

(inch) Qty. (0.295) 100 (0.591) 100 (0.886) 100 (1.181) 100 (1.476) 100 (1.772) 50 (2.067) 50 (2.362) 50 (2.657) 50 (2.953) 50 (3.248) 50 (3.543) 50

Order No.

Order No. 9511590000 9511600000 9511610000 9511620000 9511630000 9511640000 9511650000 9512180000 9511660000 9511670000 9511680000 9511690000

Spade connection

Accessories PCF 7.50/180

PCB Terminals

PCF 7.50/135

Marking strips See chapter accessories

6.0 0.236" L1

9.8 0.386"

1.3+0.1 0.051"

Crimping tool See chapter accessories

Ordering data

Solder pin length Colour of plastic

3.5 mm orange

Pitch 7.50 mm (inch) Qty. (0.295) 100 (0.591) 100 (0.886) 100 (1.181) 100 (1.476) 100 (1.772) 50 (2.067) 50 (2.362) 50 (2.657) 50 (2.953) 50 (3.248) 50 (3.543) 50

9.8 0.386"

1.3+0.1 0.051"

Ordering data

PolesL1 mm 2 7.50 3 15.00 4 22.50 5 30.00 6 37.50 7 45.00 8 52.50 9 60.00 10 67.50 11 75.00 12 82.50 13 90.00

2.5 0.098" 5 0.197"

5 0.197"

17.9 0.703"

6 0.236"

2.4 0.094"

L1+4.8 L1+0.189"

14.9 0.585"

3 " 6. 8 24 0. 2.8 0" 11 0.

L1+4.8 L1+0.189"

6.3 0.248" 2.8 0.110"

Solder pin length Colour of plastic

3.5 mm orange

Pitch 7.50 mm Order No.

Order No. 9511970000 9511980000 9511990000 9512000000 9512010000 9512020000 9512030000 9512040000 9512050000 9512060000 9512070000 9512080000

PolesL1 mm 2 7.50 3 15.00 4 22.50 5 30.00 6 37.50 7 45.00 8 52.50 9 60.00 10 67.50 11 75.00 12 82.50 13 90.00

(inch) Qty. (0.295) 100 (0.591) 50 (0.886) 100 (1.181) 100 (1.476) 100 (1.772) 50 (2.067) 50 (2.362) 50 (2.657) 50 (2.953) 50 (3.248) 50 (3.543) 50

Order No.

Order No. 9500620000 9500630000 9500640000 9500650000 9500660000 9500670000 9500680000 9500690000 9500710000 9500720000 9500730000 9500740000

B.75

Spade connection

PCF 10.00

Derating curve

6.0 0.236"

min. No. of poles (2-pole)

30 25 Conductor current to EN 60947-7-1

2.5 0.098" 9.8 0.386"

15 10

5 0.197"

• 1000 V (IEC) / 300 V (UL) • 24 A (IEC) / 15 A (UL)

L1+0.189"

35 Load current I [A]

Spade connection in 90°, 135° and 180° conductor outlet direction for 6.3 and 2.8 mm spade crimps at 10 mm pitch

2.8 0.110"

L1+4.8

P CF 10.00/90 / H07V -K2.5

6.3 0.248"

14.9 0.585"

PCB Terminals

PCF 10.00/90

0 0

10 20 30 40 50 60 70 80 90 100 110

1.3+0.1 0.051"

Ambient temperature T [°C]

Technical data

P CF 10.00/135 / H07V -K2.5

Load current I [A]

min. No. of poles (2-pole)

Solder pin length Colour of plastic

3.5 mm orange

25 Conductor current to EN 60947-7-1

20 15 10 5 0 0

20°C 24

10 20 30 40 50 60 70 80 90 100 110

III 3 V kV

690 6

40°C 24 III 2

II 2

P CF 10.00/180 / H07V -K2.5

690 1000 6 6

a UL 1059 rated data B C D Nominal voltage V 300 300 300 Rated current A 15 15 10 AWG conductor r CSA C22.2 rated data B C D Rated voltage V 300 300 300 Rated current A 15 15 10 AWG conductor Material data Type of insulating material PA Flammability class acc. UL94 V-2 Contact base material CuSn Material of contact surface tinned Information • Rated current related to rated cross-section and min. No. of poles. • Rated voltages with insulating sleeves IH 6.3 or IH 2.8 • P on drg. = pitch • Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards.

35 Load current I [A]

Overvoltage category Pollution severity

B.76

Ordering data

Ambient temperature T [°C]

Rated voltage Rated impulse voltage

min. No. of poles (2-pole)

30 25 Conductor current to EN 60947-7-1

20 15 10 5 0 0

10 20 30 40 50 60 70 80 90 100 110 Ambient temperature T [°C]

Pitch 10.00 mm PolesL1 mm 2 10.00 3 20.00 4 30.00 5 40.00 6 50.00 7 60.00 8 70.00 9 80.00 10 90.00

(inch) Qty. (0.394) 100 (0.787) 100 (1.181) 100 (1.575) 100 (1.969) 100 (2.362) 50 (2.756) 50 (3.150) 50 (3.543) 50

Order No.

Order No. 9511700000 9511710000 9511720000 9511730000 9511740000 9511750000 9511760000 9511770000 9511780000

Spade connection

Accessories PCF 10.00/180

PCB Terminals

PCF 10.00/135

Marking strips See chapter accessories

L1 P

1.3+0.1 0.051"

5 0.197"

2.5 0.098"

9.8 0.386"

Crimping tool

1.3+0.1 0.051"

Ordering data

See chapter accessories

Ordering data

Solder pin length Colour of plastic

3.5 mm orange

Pitch 10.00 mm (inch) Qty. (0.394) 100 (0.787) 100 (1.181) 100 (1.575) 100 (1.969) 100 (2.362) 50 (2.756) 50 (3.150) 50 (3.543) 50

2.8 0.110" 6.0 0.236"

17.9 0.703"

6.0 0.236" 5 0.197"

2.4 0.094"

PolesL1 mm 2 10.00 3 20.00 4 30.00 5 40.00 6 50.00 7 60.00 8 70.00 9 80.00 10 90.00

L1+4.8 L1+0.189"

14.9 0.585"

3 " 6. 48 2 0. 2.8 0" 11 0.

L1+4.8 L1+0.189"

6.3 0.248"

Solder pin length Colour of plastic

3.5 mm orange

Pitch 10.00 mm Order No.

Order No. 9512090000 9512100000 9512110000 9512120000 9512130000 9512140000 9512150000 9512160000 9512170000

PolesL1 mm 2 10.00 3 20.00 4 30.00 5 40.00 6 50.00 7 60.00 8 70.00 9 80.00 10 90.00

(inch) Qty. (0.394) 100 (0.787) 100 (1.181) 100 (1.575) 100 (1.969) 50 (2.362) 50 (2.756) 50 (3.150) 50 (3.543) 50

Order No.

Order No. 9500750000 9500760000 9500770000 9500780000 9500790000 9500810000 9500820000 9500830000 9500840000

B.77

THR PCB Terminals with clamping yoke connection

LM-THR 3.5

Derating curve

PCB Terminals

LM-THR 3.5/90 Reflow-compatible PCB terminal

L1+P

• 0.5 - 1.5 mm2 (IEC) / 28 - 14 AWG (UL) • 320 V (IEC) / 300 V (UL) • 16 A (IEC) / 10 A (UL)

min. No. of poles (2-pole)

L1 P

8,3 0.327"

4,4 0.174" 1,3+0,1 0.051"

10 20 30 40 50 60 70 80 90 100 110 Ambient temperature T [°C]

Ordering data

Solder pin length Colour of plastic

0.08…2.08 0.5…1.5

3.2 mm black

0.5…1.5 0.5…0.75 5 0.4 x 2.5 DIN 5264 0.2...0.25 20°C 16

40°C 14

III 3

III 2

II 2

125 2.5

160 2.5

320 2.5

a UL 1059 rated data B C D Nominal voltage V 300 300 Rated current A 10 10 AWG conductor 28-14 r CSA C22.2 rated data B C D Rated voltage V 300 300 Rated current A 10 10 AWG conductor 28-14 Material data Type of insulating material PA Flammability class acc. UL94 V-2 Contact base material Cu alloy Material of contact surface tinned Information • Rated current related to rated cross-section and min. No. of poles. • Max. O.D. of conductor: 2.9 mm • Wire end ferrule with plastic collar to DIN 46228 pt 4 • P on drg. = pitch • Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards.

B.78

Conductor current to EN 60947-7-1

Technical data

Rated voltage Rated impulse voltage

20 18 16 14 12 10 8 6 4 2 0

0,6 0.024" 1,9 0.075"

Through Hole Reflow (THR), high-temperatureresistant, small, compact PCB terminal with proven clamping yoke connection at 3.5 mm pitch, conductor outlet direction 90°, suitable for conductor cross-sections up to 1.5 mm2.

Load current I [A]

LM 3.5/90 / H07V-K1.5

12,8 0.504"

Pitch 3.50 mm PolesL1 mm (inch) Qty. 2 3.50 (0.138) 100 3 7.00 (0.276) 100

Order No.

Order No. 1789130000 1789140000

THR PCB Terminals with clamping yoke connection

PCB Terminals

Accessories

Marking strips See chapter accessories

Screwdriver See chapter accessories Order No. 9008370000

B.79

THR PCB Terminals with clamping yoke connection

Derating curve

LP-THR 5.08/90

PCB Terminals

LP-THR 5.08

Reflow-compatible PCB terminal

L1+P

0,6 0.024"

LP 5.08/90 / H07V-K4.0

• 0.5 - 6.0 mm2 (IEC) / 26 - 12 AWG (UL) • 500 V (IEC) / 300 V (UL) • 32 A (IEC) / 20 A (UL)

17 0.669"

Conductor current to EN 60947-7-1

2,4 0.094"

30 20 min. No. of poles (2-pole)

L1 P

5,5 0.217"

1,3+0,1 0.051"

10 20 30 40 50 60 70 80 90 100 110 Ambient temperature T [°C]

Ordering data

Solder pin length Colour of plastic

0.13…6 0.5…6

20°C 32

3.2 mm black

Pitch 5.08 mm PolesL1 mm (inch) 2 5.08 (0.200) 3 10.16 (0.400)

0.5…4 0.5…2.5 0.5…2.5 6 0.6 x 3.5 DIN 5264 0.5...0.6 40°C 32

III 3

III 2

II 2

250 4

500 4

a UL 1059 rated data B C D Nominal voltage V 300 300 Rated current A 20 10 AWG conductor 26-12 r CSA C22.2 rated data B C D Rated voltage V 300 300 Rated current A 20 10 AWG conductor 26-12 Material data Type of insulating material PA Flammability class acc. UL94 V-2 Contact base material Cu alloy Material of contact surface tinned Information • Rated current related to rated cross-section and min. No. of poles. • Wire end ferrule without plastic collar to DIN 46228 pt 1 • Wire end ferrule with plastic collar to DIN 46228 pt 4 • P on drg. = pitch • Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards.

B.80

Technical data

Rated voltage Rated impulse voltage

50 Load current I [A]

Through Hole Reflow (THR), high-temperatureresistant PCB terminal with proven clamping yoke connection at 5.08 mm pitch, conductor outlet direction 90°, suitable for conductor cross-sections up to 6.0 mm2.

11 0.433"

Qty. 100 100

Order No.

Order No. 1789150000 1789160000

THR PCB Terminals with clamping yoke connection

PCB Terminals

Accessories

Marking strips See chapter accessories

Screwdriver See chapter accessories Order No. 9008390000

B.81

LSF-SMT 3.81/90 LSF-SMT 3.50/90

Derating curve

LSF-SMT 3.81/90 LSF-SMT 3.50/90 Reflow-compatible PCB terminal

LS F -S MT 3.81/90 / H07V -K1.5

L1 + 4.2 L1 + 0.165"

30 min. No. of poles (2-pole)

25 20 15

Conductor current to EN 60947-7-1

10 P

• 0.2 - 1.5 mm2 (IEC) / 24 - 16 AWG (UL) • 320 V (IEC) / 300 V (UL) • 17.5 A (IEC) / 10 A (UL)

100

120

Ambient temperature T [°C]

Ordering data

Solder pin length Colour of plastic

0.13…1.5 0.2…1.5

20°C 17.5

1.5 mm black

3.5 mm black

Qty. 69 46 35 28 23 20 17 15 14 13 12 11 10 9 9 8 8 7 7 6 6 6 6

Order No. 1869360000 1869370000 1869380000 1869390000 1869400000 1869410000 1869420000 1869430000 1869440000 1869450000 1869460000 1869470000 1869480000 1869500000 1869510000 1869520000 1869530000 1869540000 1869550000 1869560000 1869570000 1869580000 1869590000

Order No. 1824620000 1824630000 1824640000 1824650000 1824660000 1824690000 1824700000 1824710000 1824720000 1824730000 1825300000 1871200000 1871210000 1871220000 1871230000 1871240000 1871250000 1871260000 1871270000 1871280000 1871290000 1871300000 1871310000

(inch) Qty. (0.138) 71 (0.276) 49 (0.413) 37 (0.551) 30 (0.689) 25 (0.827) 21 (0.965) 19 (1.102) 17 (1.240) 15 (1.378) 14 (1.516) 12 (1.654) 11 (1.791) 11 (1.929) 10 (2.067) 9 (2.205) 9 (2.343) 8 (2.480) 8 (2.618) 7 (2.756) 7 (2.894) 7 (3.031) 6 (3.169) 6

Order No. 1870500000 1870530000 1870550000 1870580000 1870590000 1871020000 1871030000 1871040000 1871050000 1871060000 1871070000 1871080000 1871090000 1871100000 1871110000 1871120000 1871130000 1871140000 1871150000 1871160000 1871170000 1871180000 1871190000

Order No. 1824420000 1824430000 1824440000 1824450000 1824460000 1824470000 1824480000 1824490000 1824500000 1824510000 1824520000 1870380000 1870390000 1870400000 1870410000 1870420000 1870430000 1870440000 1870450000 1870460000 1870470000 1870480000 1870490000

Pitch 3.81 mm

0.2…1.5 0.25…1.5 0.25…0.75 8

40°C 17.5

III 3

III 2

II 2

160 2.5

320 2.5

a UL 1059 rated data B C D Nominal voltage V 300 300 Rated current A 10 10 AWG conductor 24-16 r CSA C22.2 rated data B C D Rated voltage V 300 300 Rated current A 10 10 AWG conductor 24-16 Material data Type of insulating material LCP GF Flammability class acc. UL94 V-0 Contact base material Cu alloy Material of contact surface tinned Information • Additional colours on request • Rated current related to rated cross-section and min. No. of poles. • Wire end ferrule without plastic collar to DIN 46228 pt 1 • The data given under CSA relates to a cUL approval E60693 • P on drg. = pitch • Hole diameter D = 1.1+0.1mm • Operating force of slider max. 40 N • Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards.

B.82

3 0.119"

Technical data

Rated voltage Rated impulse voltage

11.7 0.461" 8.5 0.335"

Load current I [A]

PCB terminal for fully automatic assembly in reflow soldering (SMT), with Push In conductor connection system. Conductor inserted and slider operated in same direction (TOP). Packaged in tube or as tape on reel. Pin lengths optimised at 1.5 mm or 3.5 mm. Conductor outlet direction 90°.

7.8 0.305"

MAX. 14 MAX. 0.551"

7 0.276"

PCB Terminals

THR PCB Terminals with Push In connection

PolesL1 mm 2 3.81 3 7.62 4 11.43 5 15.24 6 19.05 7 22.86 8 26.67 9 30.48 10 34.29 11 38.10 12 41.91 13 45.72 14 49.53 15 53.34 16 57.15 17 60.96 18 64.77 19 68.58 20 72.39 21 76.20 22 80.01 23 83.82 24 87.63

(inch) (0.150) (0.300) (0.450) (0.600) (0.750) (0.900) (1.050) (1.200) (1.350) (1.500) (1.650) (1.800) (1.950) (2.100) (2.250) (2.400) (2.550) (2.700) (2.850) (3.000) (3.150) (3.300) (3.450)

Pitch 3.50 mm PolesL1 mm 2 3.50 3 7.00 4 10.50 5 14.00 6 17.50 7 21.00 8 24.50 9 28.00 10 31.50 11 35.00 12 38.50 13 42.00 14 45.50 15 49.00 16 52.50 17 56.00 18 59.50 19 63.00 20 66.50 21 70.00 22 73.50 23 77.00 24 80.50

THR PCB Terminals with Push In connection

Accessories PCB Terminals

LSF-SMT 3.81/90 Tape LSF-SMT 3.50/90 Tape Reflow-compatible PCB terminal

Possible colors Additional colours on request

Marking strips See chapter accessories

Ordering data Solder pin length Colour of plastic

1.5 mm black

3.5 mm black

Qty. 265 265 265 265 265 265 265 265 265 265

Order No. 1875170000 1875230000 1875240000 1875250000 1875260000 1875270000 1875280000 1875290000 1875300000 1875310000

Order No. 1875920000 1875930000 1875940000 1875950000 1875960000 1875970000 1875980000 1875990000 1876000000 1876010000

(inch) Qty. (0.138) 265 (0.276) 265 (0.413) 265 (0.551) 265 (0.689) 265 (0.827) 265 (0.965) 265 (1.102) 265 (1.240) 265 (1.378) 265 (1.516) 265

Order No. 1874690000 1874710000 1874730000 1874740000 1874810000 1874840000 1874890000 1874900000 1874930000 1874940000 1874970000

Order No. 1874990000 1875030000 1875050000 1875070000 1875080000 1875100000 1875110000 1875120000 1875130000 1875140000 1875160000

Pitch 3.81 mm PolesL1 mm 2 3.81 3 7.62 4 11.43 5 15.24 6 19.05 7 22.86 8 26.67 9 30.48 10 34.29 11 38.10

(inch) (0.150) (0.300) (0.450) (0.600) (0.750) (0.900) (1.050) (1.200) (1.350) (1.500)

Pitch 3.50 mm PolesL1 mm 2 3.50 3 7.00 4 10.50 5 14.00 6 17.50 7 21.00 8 24.50 9 28.00 10 31.50 11 35.00 12 38.50

Tape widths: 32, 44, 56, 72, 88

B.83

LSF-SMT 3.81/135 LSF-SMT 3.50/135

Derating curve

LSF-SMT 3.81/135 LSF-SMT 3.50/135 Reflow-compatible PCB terminal

L1 + 4.2 L1 + 0.165"

LS F -S MT 3.81/135 / H07V -K1.5

12.9 0.508"

30 Load current I [A]

min. No. of poles (2-pole)

25 20 15

Conductor current to EN 60947-7-1

• 0.2 - 1.5 mm (IEC) / 24 - 16 AWG (UL) • 320 V (IEC) / 300 V (UL) • 17.5 A (IEC) / 10 A (UL)

100

120

Ambient temperature T [°C]

Ordering data

Solder pin length Colour of plastic

0.13…1.5 0.2…1.5

20°C 17.5

1.5 mm black

3.5 mm black

Qty. 69 46 35 28 23 20 17 15 14 13 12 11 10 9 9 8 8 7 7 6 6 6 6

Order No. 1885410000 1885420000 1885430000 1885440000 1885450000 1885460000 1885470000 1885480000 1885490000 1885510000 1885520000 1885530000 1885540000 1885550000 1885560000 1885570000 1885580000 1885590000 1885600000 1885610000 1885620000 1885630000 1885640000

Order No. 1885880000 1885890000 1885900000 1885910000 1885920000 1885930000 1885940000 1885950000 1885960000 1885970000 1885980000 1885990000 1886000000 1886010000 1886020000 1886030000 1886040000 1886050000 1886060000 1886070000 1886080000 1886090000 1886100000

Order No. 1885180000 1885190000 1885200000 1885210000 1885220000 1885230000 1885240000 1885250000 1885260000 1885270000 1885280000 1885290000 1885300000 1885310000 1885320000 1885330000 1885340000 1885350000 1885360000 1885370000 1885380000 1885390000 1885400000

Order No. 1885650000 1885660000 1885670000 1885680000 1885690000 1885700000 1885710000 1885720000 1885730000 1885740000 1885750000 1885760000 1885770000 1885780000 1885790000 1885800000 1885810000 1885820000 1885830000 1885840000 1885850000 1885860000 1885870000

Pitch 3.81 mm

0.2…1.5 0.25…1.5 0.25…0.75 8

40°C 17.5

III 3

III 2

II 2

160 2.5

320 2.5

B.84

Technical data

Rated voltage Rated impulse voltage

3.1 0.12"

5 2

12.7 0.5"

5 0.197"

PCB Terminals

THR PCB Terminals with Push In connection

(inch) (0.150) (0.300) (0.450) (0.600) (0.750) (0.900) (1.050) (1.200) (1.350) (1.500) (1.650) (1.800) (1.950) (2.100) (2.250) (2.400) (2.550) (2.700) (2.850) (3.000) (3.150) (3.300) (3.450)

THR PCB Terminals with Push In connection

Accessories PCB Terminals

LSF-SMT 3.81/135 Tape LSF-SMT 3.50/135 Tape Reflow-compatible PCB terminal

Possible colors Additional colours on request

Marking strips See chapter accessories

Ordering data Solder pin length Colour of plastic

1.5 mm black

3.5 mm black

Qty. 190 190 190 190 190 190 190 190 190 190

Order No. 1888450000 1888460000 1888470000 1888480000 1888490000 1888500000 1888510000 1888520000 1888530000 1888540000

Order No. 1888320000 1888330000 1888340000 1888380000 1888390000 1888400000 1888410000 1888420000 1888430000 1888440000

(inch) Qty. (0.138) 190 (0.276) 190 (0.413) 190 (0.551) 190 (0.689) 190 (0.827) 190 (0.965) 190 (1.102) 190 (1.240) 190 (1.378) 190 (1.516) 190

Order No. 1887550000 1887560000 1887580000 1887630000 1887640000 1887650000 1887660000 1887670000 1887680000 1887690000 1887700000

Order No. 1887340000 1887350000 1887360000 1887460000 1887470000 1887480000 1887490000 1887500000 1887510000 1887520000 1887530000

Pitch 3.81 mm PolesL1 mm 2 3.81 3 7.62 4 11.43 5 15.24 6 19.05 7 22.86 8 26.67 9 30.48 10 34.29 11 38.10

(inch) (0.150) (0.300) (0.450) (0.600) (0.750) (0.900) (1.050) (1.200) (1.350) (1.500)

Pitch 3.50 mm PolesL1 mm 2 3.50 3 7.00 4 10.50 5 14.00 6 17.50 7 21.00 8 24.50 9 28.00 10 31.50 11 35.00 12 38.50

Tape widths: 32, 44, 56, 72, 88

B.85

LSF-SMT 3.81/180 LSF-SMT 3.50/180

Derating curve

LSF-SMT 3.81/180 LSF-SMT 3.50/180 Reflow-compatible PCB terminal

min. No. of poles (2-pole)

25 20 15

Conductor current to EN 60947-7-1

• 0.2 - 1.5 mm2 (IEC) / 24 - 16 AWG (UL) • 320 V (IEC) / 300 V (UL) • 17.5 A (IEC) / 10 A (UL)

100

0.7 0.03" 0.9 0.035"

120

Ambient temperature T [°C]

Ordering data

Solder pin length Colour of plastic

0.13…1.5 0.2…1.5

20°C 17.5

1.5 mm black

3.5 mm black

Qty. 69 46 35 28 23 20 17 15 14 13 12 11 10 9 9 8 8 7 7 6 6 6 6

Order No. 1869890000 1869900000 1869910000 1869920000 1869930000 1869940000 1869950000 1869960000 1869970000 1870000000 1870010000 1870020000 1870030000 1870040000 1870050000 1870060000 1870070000 1870080000 1870090000 1870100000 1870110000 1870120000 1870130000

Order No. 1825790000 1825800000 1825810000 1825820000 1825830000 1825840000 1825850000 1825870000 1825880000 1825890000 1825920000 1870900000 1870910000 1870920000 1870930000 1870940000 1870950000 1870960000 1870970000 1870980000 1870990000 1871000000 1871010000

Order No. 1870640000 1870650000 1870660000 1870670000 1870680000 1870690000 1870700000 1870710000 1870720000 1870730000 1870740000 1870750000 1870760000 1870770000 1870790000 1870800000 1870830000 1870840000 1870850000 1870860000 1870870000 1870880000 1870890000

Order No. 1825640000 1825650000 1825660000 1825670000 1825680000 1825690000 1825700000 1825710000 1825720000 1825730000 1825740000 1870350000 1870360000 1870370000 1870510000 1870520000 1870540000 1870560000 1870570000 1870600000 1870610000 1870620000 1870630000

Pitch 3.81 mm

0.2…1.5 0.25…1.5 0.25…0.75 8

40°C 17.5

III 3

III 2

II 2

160 2.5

320 2.5

B.86

Technical data

Rated voltage Rated impulse voltage

11.7 0.461"

MAX. 14 MAX. 0.551"

35 Load current I [A]

8.5 0.335"

L1 + 4.2 L1 + 0.165"

LS F -S MT 3.81/180 / H07V -K1.5

5.5 0.215"

PCB Terminals

THR PCB Terminals with Push In connection

(inch) (0.150) (0.300) (0.450) (0.600) (0.750) (0.900) (1.050) (1.200) (1.350) (1.500) (1.650) (1.800) (1.950) (2.100) (2.250) (2.400) (2.550) (2.700) (2.850) (3.000) (3.150) (3.300) (3.450)

THR PCB Terminals with Push In connection

Accessories PCB Terminals

LSF-SMT 3.81/180 Tape LSF-SMT 3.50/180 Tape Reflow-compatible PCB terminal

Possible colors Additional colours on request

Marking strips See chapter accessories

Ordering data Solder pin length Colour of plastic

1.5 mm black

3.5 mm black

Qty. 175 175 175 175 175 175 175 175 175 175

Order No. 1875320000 1875330000 1875340000 1875350000 1875360000 1875370000 1875380000 1875390000 1875400000 1875410000

Order No. 1875550000 1875570000 1875590000 1875650000 1875670000 1875680000 1875710000 1875730000 1875760000 1875810000

(inch) Qty. (0.138) 175 (0.276) 175 (0.413) 175 (0.551) 175 (0.689) 175 (0.827) 175 (0.965) 175 (1.102) 175 (1.240) 175 (1.378) 175 (1.516) 150

Order No. 1874490000 1874300000 1874280000 1874310000 1874320000 1874340000 1874350000 1874370000 1874380000 1874400000 1874420000

Order No. 1874510000 1874520000 1874540000 1874560000 1874590000 1874600000 1874610000 1874620000 1874640000 1874660000 1874680000

Pitch 3.81 mm PolesL1 mm 2 3.81 3 7.62 4 11.43 5 15.24 6 19.05 7 22.86 8 26.67 9 30.48 10 34.29 11 38.10

(inch) (0.150) (0.300) (0.450) (0.600) (0.750) (0.900) (1.050) (1.200) (1.350) (1.500)

Pitch 3.50 mm PolesL1 mm 2 3.50 3 7.00 4 10.50 5 14.00 6 17.50 7 21.00 8 24.50 9 28.00 10 31.50 11 35.00 12 38.50

Tape widths: 32, 44, 56, 72, 88

B.87

LSF-SMT 5.08/90 LSF-SMT 5.00/90

Derating curve

LSF-SMT 5.08/90 LSF-SMT 5.00/90 Reflow-compatible PCB terminal

B 30

min. No. of poles (2-pole)

25 20 15

Conductor current to EN 60947-7-1

10 P

• 0.2 - 1.5 mm2 (IEC) / 24 - 16 AWG (UL) • 500 V (IEC) / 300 V (UL) • 17.5 A (IEC) / 10 A (UL)

100

120

Ambient temperature T [°C]

Ordering data

Solder pin length Colour of plastic

0.13…1.5 0.2…1.5

20°C 17.5

1.5 mm black

3.5 mm black

Qty. 59 38 28 22 18 15 13

Order No. 1869670000 1869680000 1869690000 1869700000 1869710000 1869720000 1869730000

Order No. 1824810000 1824820000 1824830000 1824840000 1824850000 1824860000 1824870000

(inch) Qty. (0.197) 60 (0.394) 39 (0.591) 28 (0.787) 22 (0.984) 18 (1.181) 16 (1.378) 14

Order No. 1869600000 1869610000 1869620000 1869630000 1869640000 1869650000 1869660000

Order No. 1824740000 1824750000 1824760000 1824770000 1824780000 1824790000 1824800000

Pitch 5.08 mm PolesL1 mm 2 5.08 3 10.16 4 15.24 5 20.32 6 25.40 7 30.48 8 35.56

0.2…1.5 0.25…1.5 0.25…0.75 8

(inch) (0.200) (0.400) (0.600) (0.800) (1.000) (1.200) (1.400)

40°C 17.5

III 3

III 2

II 2

250 4

320 4

500 4

B.88

3 0.119"

Technical data

Rated voltage Rated impulse voltage

11.7 0.461" 8.5 0.335"

Load current I [A]

L1 + 4.2 L1 + 0.165"

7.8 0.305"

MAX. 14 MAX. 0.551"

LS F -S MT 5.08/90 / H07V -K1.5

7 0.276"

PCB Terminals

THR PCB Terminals with Push In connection

Pitch 5.00 mm PolesL1 mm 2 5.00 3 10.00 4 15.00 5 20.00 6 25.00 7 30.00 8 35.00

THR PCB Terminals with Push In connection

Accessories PCB Terminals

LSF-SMT 5.08/90 Tape LSF-SMT 5.00/90 Tape Reflow-compatible PCB terminal

Possible colors Additional colours on request

Marking strips See chapter accessories

Ordering data Solder pin length Colour of plastic

1.5 mm black

3.5 mm black

Qty. 265 265 265 265 265 265 265

Order No. 1876480000 1876440000 1878520000 1876210000 1876150000 1875720000 1875520000

Order No. 1876470000 1876420000 1876310000 1876190000 1876120000 1875690000 1875510000

(inch) Qty. (0.197) 265 (0.394) 265 (0.591) 265 (0.787) 265 (0.984) 265 (1.181) 265 (1.378) 265

Order No. 1876240000 1876260000 1876270000 1876280000 1876300000 1876330000 1876350000

Order No. 1876430000 1876510000 1876530000 1876550000 1876560000 1876540000 1876520000

Pitch 5.08 mm PolesL1 mm 2 5.08 3 10.16 4 15.24 5 20.32 6 25.40 7 30.48 8 35.56

(inch) (0.200) (0.400) (0.600) (0.800) (1.000) (1.200) (1.400)

Pitch 5.00 mm PolesL1 mm 2 5.00 3 10.00 4 15.00 5 20.00 6 25.00 7 30.00 8 35.00

Tape widths: 32, 44, 56, 72, 88

B.89

LSF-SMT 5.08/135 LSF-SMT 5.00/135

Derating curve

LSF-SMT 5.08/135 LSF-SMT 5.00/135 Reflow-compatible PCB terminal

L1 + 4.2 L1 + 0.165"

LS F -S MT 5.08/135 / H07V -K1.5

12.9 0.508"

30 Load current I [A]

min. No. of poles (2-pole)

25 20 15

Conductor current to EN 60947-7-1

100

120

Ambient temperature T [°C]

Ordering data

Solder pin length Colour of plastic

0.13…1.5 0.2…1.5

20°C 17.5

1.5 mm black

3.5 mm black

Qty. 59 38 28 22 18 15 13 12 11 10 9 8 7 7 6

Order No. 1884730000 1884740000 1884750000 1884760000 1884770000 1884780000 1884790000 1884800000 1884810000 1884820000 1884830000 1884840000 1884850000 1884860000 1884870000

Order No. 1885020000 1885030000 1885040000 1885050000 1885060000 1885070000 1885080000 1885090000 1885100000 1885110000 1885120000 1885130000 1885140000 1885150000 1885160000

(inch) Qty. (0.197) 60 (0.394) 39 (0.591) 28 (0.787) 22 (0.984) 18 (1.181) 16 (1.378) 14 (1.575) 12 (1.772) 11 (1.969) 10 (2.165) 9 (2.362) 8 (2.559) 8 (2.756) 7 (2.953) 6

Order No. 1884530000 1884540000 1884550000 1884560000 1884570000 1884580000 1884590000 1884600000 1884660000 1884670000 1884680000 1884690000 1884700000 1884710000 1884720000

Order No. 1884340000 1884370000 1884380000 1884390000 1884400000 1884410000 1884420000 1884430000 1884440000 1884450000 1884460000 1884470000 1884500000 1884510000 1884520000

Pitch 5.08 mm

0.2…1.5 0.25…1.5 0.25…0.75 8

40°C 17.5

III 3

III 2

II 2

250 4

320 4

500 4

B.90

Technical data

Rated voltage Rated impulse voltage

3.1 0.12"

10 5

• 0.2 - 1.5 mm2 (IEC) / 24 - 16 AWG (UL) • 500 V (IEC) / 300 V (UL) • 17.5 A (IEC) / 10 A (UL)

12.7 0.5"

5 0.197"

PCB Terminals

THR PCB Terminals with Push In connection

PolesL1 mm 2 5.08 3 10.16 4 15.24 5 20.32 6 25.40 7 30.48 8 35.56 9 40.64 10 45.72 11 50.80 12 55.88 13 60.96 14 66.04 15 71.12 16 76.20

(inch) (0.200) (0.400) (0.600) (0.800) (1.000) (1.200) (1.400) (1.600) (1.800) (2.000) (2.200) (2.400) (2.600) (2.800) (3.000)

Pitch 5.00 mm PolesL1 mm 2 5.00 3 10.00 4 15.00 5 20.00 6 25.00 7 30.00 8 35.00 9 40.00 10 45.00 11 50.00 12 55.00 13 60.00 14 65.00 15 70.00 16 75.00

THR PCB Terminals with Push In connection

Accessories PCB Terminals

LSF-SMT 5.08/135 Tape LSF-SMT 5.00/135 Tape Reflow-compatible PCB terminal

Possible colors Additional colours on request

Marking strips See chapter accessories

Ordering data Solder pin length Colour of plastic

1.5 mm black

3.5 mm black

Qty. 190 190 190 190 190 190 190

Order No. 1888710000 1888720000 1888730000 1888740000 1888750000 1888760000 1888770000

Order No. 1888780000 1888790000 1888810000 1888830000 1888840000 1888870000 1888880000

(inch) Qty. (0.197) 190 (0.394) 190 (0.591) 190 (0.787) 190 (0.984) 190 (1.181) 190 (1.378) 190

Order No. 1888570000 1888580000 1888590000 1888600000 1888610000 1888620000 1888630000

Order No. 1888640000 1888650000 1888660000 1888670000 1888680000 1888690000 1888700000

Pitch 5.08 mm PolesL1 mm 2 5.08 3 10.16 4 15.24 5 20.32 6 25.40 7 30.48 8 35.56

(inch) (0.200) (0.400) (0.600) (0.800) (1.000) (1.200) (1.400)

Pitch 5.00 mm PolesL1 mm 2 5.00 3 10.00 4 15.00 5 20.00 6 25.00 7 30.00 8 35.00

Tape widths: 32, 44, 56, 72, 88

B.91

LSF-SMT 5.08/180 LSF-SMT 5.00/180

Derating curve

LSF-SMT 5.08/180 LSF-SMT 5.00/180 Reflow-compatible PCB terminal

MAX. 14 MAX. 0.551"

30 Load current I [A]

8.5 0.335"

L1 + 4.2 L1 + 0.165"

LS F -S MT 5.08/180 / H07V -K1.5 min. No. of poles (2-pole)

20 15

Conductor current to EN 60947-7-1 0.7 0.03"

10 L1

• 0.2 - 1.5 mm2 (IEC) / 24 - 16 AWG (UL) • 500 V (IEC) / 300 V (UL) • 17.5 A (IEC) / 10 A (UL)

0 0

100

120

Ordering data

Solder pin length Colour of plastic

0.13…1.5 0.2…1.5

20°C 17.5

1.5 mm black

3.5 mm black

Qty. 59 38 28 22 18 15 13

Order No. 1870210000 1870220000 1870230000 1870240000 1870250000 1870260000 1870270000

Order No. 1826040000 1826060000 1826070000 1826080000 1826100000 1826110000 1826120000

(inch) Qty. (0.197) 60 (0.394) 39 (0.591) 28 (0.787) 22 (0.984) 18 (1.181) 16 (1.378) 14

Order No. 1870140000 1870150000 1870160000 1870170000 1870180000 1870190000 1870200000

Order No. 1825960000 1825970000 1825980000 1825990000 1826000000 1826010000 1826020000

Pitch 5.08 mm PolesL1 mm 2 5.08 3 10.16 4 15.24 5 20.32 6 25.40 7 30.48 8 35.56

0.2…1.5 0.25…1.5 0.25…0.75 8

(inch) (0.200) (0.400) (0.600) (0.800) (1.000) (1.200) (1.400)

40°C 17.5

III 3

III 2

II 2

250 4

320 4

500 4

B.92

0.9 0.035"

Ambient temperature T [°C]

Technical data

Rated voltage Rated impulse voltage

11.7 0.461"

5.5 0.215"

PCB Terminals

THR PCB Terminals with Push In connection

Pitch 5.00 mm PolesL1 mm 2 5.00 3 10.00 4 15.00 5 20.00 6 25.00 7 30.00 8 35.00

THR PCB Terminals with Push In connection

Accessories PCB Terminals

LSF-SMT 5.08/180 Tape LSF-SMT 5.00/180 Tape Reflow-compatible PCB terminal

Possible colors Additional colours on request

Marking strips See chapter accessories

Ordering data Solder pin length Colour of plastic

1.5 mm black

3.5 mm black

Qty. 175 175 175 175 175 175 175

Order No. 1876500000 1876460000 1876410000 1876290000 1876180000 1876100000 1875610000

Order No. 1876490000 1876450000 1876360000 1876250000 1876170000 1875750000 1875580000

(inch) Qty. (0.197) 175 (0.394) 175 (0.591) 175 (0.787) 175 (0.984) 175 (1.181) 175 (1.378) 175

Order No. 1876020000 1876030000 1876050000 1876060000 1876070000 1876080000 1876090000

Order No. 1876110000 1876130000 1876140000 1876160000 1876200000 1876220000 1876230000

Pitch 5.08 mm PolesL1 mm 2 5.08 3 10.16 4 15.24 5 20.32 6 25.40 7 30.48 8 35.56

(inch) (0.200) (0.400) (0.600) (0.800) (1.000) (1.200) (1.400)

Pitch 5.00 mm PolesL1 mm 2 5.00 3 10.00 4 15.00 5 20.00 6 25.00 7 30.00 8 35.00

Tape widths: 32, 44, 56, 72, 88

B.93

LSF-SMT 7.62/90 LSF-SMT 7.50/90

Derating curve

LSF-SMT 7.62/90 LSF-SMT 7.50/90

LS F -S MT 7.62/90 / H07V -K1.5 35 30

min. No. of poles (2-pole)

8.5 0.335"

Load current I [A]

MAX. 14 MAX. 0.551" 11.7 0.461"

L1 + 4.2 L1 + 0.165"

7.8 0.305"

Reflow-compatible PCB terminal

25 20 15

Conductor current to EN 60947-7-1

7 0.276"

PCB Terminals

THR PCB Terminals with Push In connection

3 0.119"

• 0.2 - 1.5 mm2 (IEC) / 24 - 16 AWG (UL) • 800 V (IEC) / 300 V (UL) • 17.5 A (IEC) / 10 A (UL)

0 0

100

120 D

Ordering data

Solder pin length Colour of plastic

0.13…1.5 0.2…1.5

20°C 17.5

1.5 mm black

3.5 mm black

Qty. 46 28 20 15 13 11 9

Order No. 1869260000 1869270000 1869280000 1869290000 1869300000 1869310000 1869320000

Order No. 1824950000 1824960000 1824970000 1824980000 1824990000 1825000000 1825010000

(inch) Qty. (0.295) 47 (0.591) 28 (0.886) 20 (1.181) 16 (1.476) 13 (1.772) 11 (2.067) 9

Order No. 1869740000 1869750000 1869760000 1869770000 1869780000 1869790000 1869800000

Order No. 1824880000 1824890000 1824900000 1824910000 1824920000 1824930000 1824940000

Pitch 7.62 mm PolesL1 mm 2 7.62 3 15.24 4 22.86 5 30.48 6 38.10 7 45.72 8 53.34

0.2…1.5 0.25…1.5 0.25…0.75 8

(inch) (0.300) (0.600) (0.900) (1.200) (1.500) (1.800) (2.100)

40°C 17.5

III 3

III 2

II 2

500 6

630 6

800 6

a UL 1059 rated data B C D Nominal voltage V 300 150 300 Rated current A 10 10 10 AWG conductor 24-16 r CSA C22.2 rated data B C D Rated voltage V 300 150 300 Rated current A 10 10 10 AWG conductor 24-16 Material data Type of insulating material LCP GF Flammability class acc. UL94 V-0 Contact base material Cu alloy Material of contact surface tinned Information • Additional colours on request • Rated current related to rated cross-section and min. No. of poles. • Wire end ferrule without plastic collar to DIN 46228 pt 1 • The data given under CSA relates to a cUL approval E60693 • P on drg. = pitch • Hole diameter D = 1.1+0.1mm • Operating force of slider max. 40 N • Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards.

B.94

Ambient temperature T [°C]

Technical data

Rated voltage Rated impulse voltage

Pitch 7.50 mm PolesL1 mm 2 7.50 3 15.00 4 22.50 5 30.00 6 37.50 7 45.00 8 52.50

THR PCB Terminals with Push In connection

Accessories PCB Terminals

LSF-SMT 7.62/90 Tape LSF-SMT 7.50/90 Tape Reflow-compatible PCB terminal

Possible colors Additional colours on request

Marking strips See chapter accessories

Ordering data Solder pin length Colour of plastic

1.5 mm black

3.5 mm black

Qty. 265 265 265 265 265

Order No. 1874700000 1874570000 1874480000 1874430000 1874330000

Order No. 1874670000 1874550000 1874470000 1874410000 1874290000

(inch) Qty. (0.295) 265 (0.591) 265 (0.886) 265 (1.181) 265 (1.476) 265

Order No. 1875480000 1875440000 1875040000 1874980000 1874910000

Order No. 1875470000 1875430000 1875020000 1874960000 1874880000

Pitch 7.62 mm PolesL1 mm 2 7.62 3 15.24 4 22.86 5 30.48 6 38.10

(inch) (0.300) (0.600) (0.900) (1.200) (1.500)

Pitch 7.50 mm PolesL1 mm 2 7.50 3 15.00 4 22.50 5 30.00 6 37.50

Tape widths: 32, 44, 56, 72, 88

B.95

LSF-SMT 7.62/135 LSF-SMT 7.50/135

Derating curve

LSF-SMT 7.62/135 LSF-SMT 7.50/135 Reflow-compatible PCB terminal

L1 + 4.2 L1 + 0.165"

LS F -S MT 7.62/135 / H07V -K1.5

12.9 0.508"

30 Load current I [A]

12.7 0.5"

min. No. of poles (2-pole)

25 20 15

Conductor current to EN 60947-7-1

3.1 0.12"

5 0.197"

PCB Terminals

THR PCB Terminals with Push In connection

• 0.2 - 1.5 mm2 (IEC) / 24 - 16 AWG (UL) • 800 V (IEC) / 300 V (UL) • 17.5 A (IEC) / 10 A (UL)

0 0

100

120

Ordering data

Solder pin length Colour of plastic

0.13…1.5 0.2…1.5

20°C 17.5

1.5 mm black

3.5 mm black

Qty. 46 28 20 15 13 11 9

Order No. 1884950000 1884960000 1884970000 1884980000 1884990000 1885000000 1885010000

Order No. 1886180000 1886190000 1886200000 1886210000 1886220000 1886230000 1886240000

(inch) Qty. (0.295) 47 (0.591) 28 (0.886) 20 (1.181) 16 (1.476) 13 (1.772) 11 (2.067) 9

Order No. 1884880000 1884890000 1884900000 1884910000 1884920000 1884930000 1884940000

Order No. 1886110000 1886120000 1886130000 1886140000 1886150000 1886160000 1886170000

Pitch 7.62 mm PolesL1 mm 2 7.62 3 15.24 4 22.86 5 30.48 6 38.10 7 45.72 8 53.34

0.2…1.5 0.25…1.5 0.25…0.75 8

(inch) (0.300) (0.600) (0.900) (1.200) (1.500) (1.800) (2.100)

40°C 17.5

III 3

III 2

II 2

500 6

630 6

800 6

B.96

Ambient temperature T [°C]

Technical data

Rated voltage Rated impulse voltage

Pitch 7.50 mm PolesL1 mm 2 7.50 3 15.00 4 22.50 5 30.00 6 37.50 7 45.00 8 52.50

THR PCB Terminals with Push In connection

Accessories PCB Terminals

LSF-SMT 7.62/135 Tape LSF-SMT 7.50/135 Tape Reflow-compatible PCB terminal

Possible colors Additional colours on request

Marking strips See chapter accessories

Ordering data Solder pin length Colour of plastic

1.5 mm black

3.5 mm black

Qty. 190 190 190 190 190

Order No. 1887110000 1887120000 1887130000 1887140000 1887150000

Order No. 1887160000 1887170000 1887180000 1887190000 1887200000

(inch) Qty. (0.295) 190 (0.591) 190 (0.886) 190 (1.181) 190 (1.476) 190

Order No. 1888890000 1888910000 1888930000 1888940000 1888950000

Order No. 1888970000 1888990000 1889000000 1889020000 1889030000

Pitch 7.62 mm PolesL1 mm 2 7.62 3 15.24 4 22.86 5 30.48 6 38.10

(inch) (0.300) (0.600) (0.900) (1.200) (1.500)

Pitch 7.50 mm PolesL1 mm 2 7.50 3 15.00 4 22.50 5 30.00 6 37.50

Tape widths: 32, 44, 56, 72, 88

B.97

LSF-SMT 7.62/180 LSF-SMT 7.50/180

Derating curve

LSF-SMT 7.62/180 LSF-SMT 7.50/180 Reflow-compatible PCB terminal

L1 + 4.2 L1 + 0.165"

LS F -S MT 7.62/180 / H07V -K1.5 min. No. of poles (2-pole)

25 20 15

Conductor current to EN 60947-7-1

• 0.2 - 1.5 mm (IEC) / 24 - 16 AWG (UL) • 800 V (IEC) / 300 V (UL) • 17.5 A (IEC) / 10 A (UL)

100

1.5 mm black

3.5 mm black

Qty. 46 28 20 15 13 11 9

Order No. 1869810000 1869830000 1869840000 1869850000 1869860000 1869870000 1869880000

Order No. 1826210000 1826220000 1826230000 1826240000 1826250000 1826260000 1826270000

(inch) Qty. (0.295) 47 (0.591) 28 (0.886) 20 (1.181) 16 (1.476) 13 (1.772) 11 (2.067) 9

Order No. 1870280000 1870290000 1870300000 1870310000 1870320000 1870330000 1870340000

Order No. 1826130000 1826140000 1826150000 1826160000 1826170000 1826180000 1826190000

120

Ambient temperature T [°C]

Ordering data

Solder pin length Colour of plastic

0.13…1.5 0.2…1.5

Pitch 7.62 mm PolesL1 mm 2 7.62 3 15.24 4 22.86 5 30.48 6 38.10 7 45.72 8 53.34

0.2…1.5 0.25…1.5 0.25…0.75 8

20°C 17.5

(inch) (0.300) (0.600) (0.900) (1.200) (1.500) (1.800) (2.100)

40°C 17.5

III 3

III 2

II 2

500 6

630 6

800 6

B.98

0.9 0.035"

Technical data

Rated voltage Rated impulse voltage

0.7 0.03"

5 2

11.7 0.461"

MAX. 14 MAX. 0.551"

35 Load current I [A]

8.5 0.335"

5.5 0.215"

PCB Terminals

THR PCB Terminals with Push In connection

Pitch 7.50 mm PolesL1 mm 2 7.50 3 15.00 4 22.50 5 30.00 6 37.50 7 45.00 8 52.50

THR PCB Terminals with Push In connection

Accessories PCB Terminals

LSF-SMT 7.62/180 Tape LSF-SMT 7.50/180 Tape Reflow-compatible PCB terminal

Possible colors Additional colours on request

Marking strips See chapter accessories

Ordering data Solder pin length Colour of plastic

1.5 mm black

3.5 mm black

Qty. 175 175 175 175 175

Order No. 1874870000 1874650000 1874530000 1874450000 1874390000

Order No. 1874750000 1874630000 1874500000 1874460000 1874360000

(inch) Qty. (0.295) 175 (0.591) 175 (0.886) 175 (1.181) 175 (1.476) 175

Order No. 1875500000 1875460000 1875090000 1875010000 1874950000

Order No. 1875490000 1875450000 1875060000 1875000000 1874920000

Pitch 7.62 mm PolesL1 mm 2 7.62 3 15.24 4 22.86 5 30.48 6 38.10

(inch) (0.300) (0.600) (0.900) (1.200) (1.500)

Pitch 7.50 mm PolesL1 mm 2 7.50 3 15.00 4 22.50 5 30.00 6 37.50

Tape widths: 32, 44, 56, 72, 88

B.99

B.100

PCB Terminals