http://www.wexoe.dk/fileadmin/produktchefer/dokumentation/schroff/europacpro by Wexøe A/S

Electronic

Packagin g

��

�� .biz

❍ ✔ detailed product descriptions on the Internet

Schroff GmbH Langenalber Straße 96 - 100 75334 Straubenhardt Deutschland Tel. +49 (0) 7082 - 794-0 Fax +49 (0) 7082 - 794-200 email: info@schroff.de

www.schroff.biz

Electronic Packaging

nt a i l p m o HS c O R y l l 06! u 0 2 …f y l u tJ f rom 1s 39601-401 04/2006

��

❍ ✔ clear order information in the catalogue

www.

Edition 22

6 Subracks

��

�

Edition 22

Perfect combination …

Buch fĂźr druck 060411.book Seite 0 Dienstag, 11. April 2006 5:36 17

Ă&#x153;bersicht

PROLINE

Overview ........... 0

Subracks

Cabinets ............ 1

Wall mounted cases ............... 2

Accessories for cabinets and wall mounted cases .... 3

Climate control .... 4

Desk-top cases .... 5

Subracks/ 19" chassis ......... 6

19" subrack with high flexibility EMC shielding upgradable

Front panels, plug-in units ....... 7

Systems ............ 8

For railway applications

Power supply units ................ 9

Backplanes ....... 10

Connectors, front panel component system ............ 11

Appendix ......... 12 06197001 06104001 36106005

6.0

UK 04/2006

Electronics Packaging

www.schroff.biz

Buch f端r druck 060411.book Seite 1 Dienstag, 11. April 2006 5:36 17

Subracks

Overview .........6.0

europacPRO .....6.2

europac integral ......... 6.72

multipac ........ 6.76

inpac ............ 6.86

integral cost optimised 19" subrack with integrated functions easy assembly, for high quantities

19" chassis with high mechanical stability Modular assembly for standardised board formats

19" chassis for non-standardised components and horizontal board assembly

06502002 02192004 06002001 36106006

Electronics Packaging

www.schroff.biz

UK 04/2006

6.1

Buch für druck 060413.book Seite 2 Donnerstag, 13. April 2006 5:47 17

Overview ........... 0

Subracks – D

Cabinets ............ 1

Wall mounted cases ............... 2

Cabinet-, wallmounted cases accessories ......... 3

Climate control .... 4

Table top cases .... 5

06197001

Subracks/ 19"-chassis ........ 6

Front panels, ...... 7 plug-in units

Adaption of the subrack stability with light or robust horizontal rails.

04602002

The IEEE handle and the shielded front panel are appropriate to the assembly of CompactPCI and VME64x chassis systems.

Systems ........... 8

Power supply ...... 9 units

Backplanes ........10

Connectors, front panel component system ............ 11

Appendix ......... 12

6.2

UK 04/2006

Consecutive numbering on the horizontal rail and a marker on the guide rail are a fast and optical aid for positioning. Electronics are protected by applicable ESD clips in the front or rear against electrostatic discharge.

Standards / certifications

Modifications

쮿 Internal and external dimensions in accordance with IEC 60297-3-101 / IEEE 1101.1 IEC 60297-3-102 / IEEE 1101.10/11 IEC 60297-3-103

쮿 Assembly service in accordance with customer specification

쮿 Type of protection IP 20 in accordance with IEC 60529

쮿 Front panel cut-outs to your requirements with our Front Panel Fast Track possible

쮿 Modified side panels and machined horizontal rails

쮿 EMC testing in accordance with VG 95373 part 15 쮿 Shock and vibration test report: Railway standards BN 411002; BN 411003, NFF 61005, NFF 60002 IEC 61587-1, EN 50155

Note: Where finish is identified as being chromated this provides a conductive surface to maintain high levels of EMC shielding effectiveness

Further important information can be found on the internet under www.schroff.biz Electronics Packaging

www.schroff.biz

6_10_europacPRO_overview_e_.fm Seite 3 Dienstag, 18. April 2006 9:27 09

Subracks – D

Overview .........6.2

19" subrack 쮿 Shock and vibration capability in accordance with IEC 61587-1, EN 50115, NFF 61005 / NFF-60-002, German "Bundesbahn" standard BN 411002 and BN 411003 쮿 IEEE 1101.1 compatible 쮿 Appropriate for extractor handles in accordance with IEEE 1101.10/11 for CompactPCI and VME64x applications 쮿 EMC shielding retrofittable Kits 3 / 6 U 쮿 unshielded version 쮿 shielded version 쮿 shielded version for CompactPCI applications

Subrack kits 3 / 6 U ............6.4 Unshielded / shielded . . . . . . . .6.4 Subrack kit, shielded for CompactPCI applications ....... 6.10

06102007

Kits 3 / 6 U for railway applications

Text

쮿 unshielded, shielded NFF 61005/60002 version 쮿 unshielded, shielded EN 50155 version 쮿 shielded version for CompactPCI applications in accordance with EN 50155 and NFF 61005/60002

Subracks 3 / 6 U for railway applications ... 6.14 Unshielded, shielded, for CompactPCI applications . . . . . 6.17

06104003

Accessories

Text

쮿 Configuration with accessories of the catalogue

06105058

Configuration on the internet

Text

Accessories Side panels . . . . . 6.25 Front handles . . . . 6.29 Horizontal rails . . 6.30 Threaded inserts, perforated strips, insulation strips ... 6.34 Front/rear panels . 6.35 Cover plates . . . . . 6.36 EMC shielding . . . 6.41 Internal configuration . . . . 6.47 Combined mounting . . . . . . . 6.52 Guide rails . . . . . 6.57 Air flow barriers . . 6.63 Assembly parts . . 6.66

Logo_configurator

Electronics Packaging

www.schroff.biz

UK 04/2006

6.3

Buch für druck 060413.book Seite 4 Donnerstag, 13. April 2006 5:47 17

Subracks – D Subrack kit, unshielded D

쮿 For connector (IEC 60603-2 / DIN 41612)

Delivery comprises (kit) Item 1 2 3 3a 3b 4 5

Qty 3U 2 2 2 2 2 1

Description 6U 2 2 2 2 1 2 1

19" support bracket (for stainless steel gasket) Side panel type F Front horizontal rail (L-SL) Rear horizontal rail (L-WZ) Centre horizontal rail (WZ) Threaded insert, pre-mounted Assembly kit

Order Information 06105001

3U 2

3+4

5 2

1 5

Height Width B Depth U HP mm 3 84 175 3 84 235 3 84 295 3 84 355 3 84 415 3 84 475 6 84 175 6 84 235 6 84 295 6 84 355 6 84 415 6 84 475 Assembly kit, PU 8 x (Screw, washer, nut) for assembly of subracks in a 19" case or cabinet

Order no. 24563-191 24563-192 24563-193 24563-194 24563-195 24563-196 24563-491 24563-492 24563-493 24563-494 24563-495 24563-496 21100-435

06105053

For further information www.schroff.biz/oneclick oneClick code = Order no. 3a 3b

5 2 3+4

1 5 06105054

04400003

Rear horizontal rail for backplane assembly

6.4

UK 04/2006

Electronics Packaging

www.schroff.biz

Buch für druck 060413.book Seite 5 Donnerstag, 13. April 2006 5:47 17

Subracks – D Guide rails D

쮿 Material PBT UL 94 V-0, red, groove width 2 mm, for printed board thickness of 1.6 mm

Order Information Description

Depth Qty / PU mm Guide rail, 160 mm deep 160 10 Guide rail, 220 mm deep 220 10 ESD clip for guide rail PU 50 pieces

Order no. 24560-351 24560-353 24560-255

쮿 Further guide rails, see page 6.58

For further information www.schroff.biz/oneclick oneClick code = Order no.

06102001

ESD clip

04503050

Standard cover D

쮿 Mechanical cover for components 쮿 For sliding into the groove of horizontal rails type "light" (L)

Delivery comprises Item 1

Qty 2

Description Cover (1), Al, perforated 1.2 mm, perforation diameter 3.8 mm, raw aluminium, air throughput 60%

Order Information Description Cover Cover

Depth mm 160 220

Qty / PU 2 2

Order no. 24561-051 24561-052

Note 쮿 Standard cover can only be used with horizontal rails type "light" 04502068

For further information www.schroff.biz/oneclick oneClick code = Order no.

Electronics Packaging

www.schroff.biz

UK 04/2006

6.5

Buch für druck 060413.book Seite 6 Donnerstag, 13. April 2006 5:47 17

Subracks – D Subrack kit, unshielded D

쮿 For backplane assembly with insulation strip

Delivery comprises (kit) Item 1 2 3 3a 3b 4 5 6

06102007

06102064

Qty 3U 2 2 2 2 4 2 1

Description 6U 2 2 2 2 1 6 4 1

19" support bracket (for stainless steel gasket) Side panel type F Front horizontal rail (L-SL) Rear horizontal rail (L-ST) Centre horizontal rail (ST) Threaded insert, pre-mounted Insulation strip, pre-assembled Assembly kit

Order Information Height Width B Depth U HP mm 3 84 175 3 84 235 3 84 295 3 84 355 3 84 415 3 84 475 6 84 175 6 84 235 6 84 295 6 84 355 6 84 415 6 84 475 Assembly kit, PU 8 x (Screw, washer, nut) for assembly of subracks in a 19" case or cabinet

Order no. 24563-131 24563-132 24563-133 24563-134 24563-135 24563-136 24563-431 24563-432 24563-433 24563-434 24563-435 24563-436 21100-435

For further information www.schroff.biz/oneclick oneClick code = Order no.

06102081

04400001

Rear horizontal rail for backplane assembly

6.6

UK 04/2006

Electronics Packaging

www.schroff.biz

Buch für druck 060413.book Seite 7 Donnerstag, 13. April 2006 5:47 17

Subracks – D Guide rails D

쮿 Material PBT UL 94 V-0, red, groove width 2 mm, for printed board thickness of 1.6 mm

Order Information Description

Depth Qty / PU mm Guide rail, 160 mm deep 160 10 Guide rail, 220 mm deep 220 10 ESD clip for guide rail PU 50 pieces

Order no. 24560-351 24560-353 24560-255

쮿 Further guide rails, see page 6.58

For further information www.schroff.biz/oneclick oneClick code = Order no.

06102001

ESD clip

04503050

Standard cover D

쮿 Mechanical cover for components 쮿 For sliding into the groove of horizontal rails type "light" (L)

Delivery comprises Item 1

Qty 2

Description Cover (1), aluminium perforated 1.2 mm, perforation diameter 3.8 mm, raw aluminium, air throughput 60%

Order Information Description Cover Cover

Depth mm 160 220

Qty / PU 2 2

Order no. 24561-051 24561-052

Note 쮿 Standard cover can only be used with horizontal rails type "light" (L) 04502068

For further information www.schroff.biz/oneclick oneClick code = Order no.

Electronics Packaging

www.schroff.biz

UK 04/2006

6.7

Buch für druck 060413.book Seite 8 Donnerstag, 13. April 2006 5:47 17

Subracks – D Subrack kit, shielded D

쮿 Subrack, "light" type (L) 쮿 Rear horizontal rails for backplane assembly with insulation strip 쮿 Shielding attenuation typically 40 dB at 1 GHz (in accordance with VG 95373, part 15), provided the front is closed with shielded front panels

Delivery comprises (kit) Item

06102008

3U 7

4b + 5 + 6 4a + 5 9

4 + 5 + 11

1 2 3 4 4a 4b 4c 5 6 7 8 9 10 11

Qty 3U 2 2 2 2 2 2 6 2 2 1 1 1 2

Description 6U 2 2 2 2 2 2 1 8 4 2 1 1 1 2

19" support bracket Rear angle Side panel type F Horizontal rail, front (L-KD) Rear horizontal rail (L-KD) Horizontal rail for backplane assembly (L-ST) Centre horizontal rail (ST) Threaded insert, pre-mounted Insulation strip, assembled Cover EMC EMC sealing material, pre-mounted Rear panel Assembly kit Perforated strip (pre-mounted in item 4)

Order Information

06102066

Height Width B Depth D U HP mm 3 84 235 3 84 295 3 84 355 3 84 415 3 84 475 6 84 235 6 84 295 6 84 355 6 84 415 6 84 475 Assembly kit, PU 8 x (Screw, washer, nut) for assembly of subracks in a 19" case or cabinet

Order no. 24563-142 24563-143 24563-144 24563-145 24563-146 24563-442 24563-443 24563-444 24563-445 24563-446 21100-435

For further information www.schroff.biz/oneclick oneClick code = Order no.

06102075

04400001

Rear horizontal rail for backplane assembly

6.8

UK 04/2006

Electronics Packaging

www.schroff.biz

Buch für druck 060413.book Seite 9 Donnerstag, 13. April 2006 5:47 17

Subracks – D Perforated rail for connector EN 60603-2 DIN 41612 Order Information Description Perforated rail with threaded insert M2.5

Qty / PU 4

Order no. 20822-048

Note 쮿 If connectors (IEC 60603-2 / DIN 41612) should be mounted, additional perforated rails (1) are to be fitted on the insulation strips on the rear horizontal rails

For further information www.schroff.biz/oneclick oneClick code = Order no.

04502075

Guide rails D

쮿 Material PBT UL 94 V-0, red, groove width 2 mm, for printed board thickness of 1.6 mm

Order Information Description

Depth mm Guide rail, 160 mm deep 160 Guide rail, 220 mm deep 220 ESD clip for guide rail PU 50 pieces

Qty / PU 10 10

Order no. 24560-351 24560-353 24560-255

쮿 Further guide rails, see page 6.58

For further information www.schroff.biz/oneclick 06102001

oneClick code = Order no.

ESD clip

04503050

Electronics Packaging

www.schroff.biz

UK 04/2006

6.9

Buch für druck 060413.book Seite 10 Donnerstag, 13. April 2006 5:47 17

Subracks – D Subrack kit, shielded for CompactPCI application D

쮿 Subrack, "heavy" type 쮿 For plug-in units with high insertion / withdrawal forces in accordance with IEEE 1101.10 쮿 Rear horizontal rail for backplane mounting with insulation strip 쮿 Typical shielding 40 dB at 1 GHz (in accordance with VG 95373, part 15), provided that the front is closed by shielded front panels

Delivery comprises (kit) Item 06102009

1 2 3 4 4a 4b 4c 4d 5 6 7 8 9 10 11

3 4

4c + 5 + 6 4b + 5

1 9 4a + 5 + 11

Qty 3U 2 2 2 1 1 2 2 6 2 2 1 1 1 2

Description 6U 2 2 2 2 2 2 1 8 4 2 1 1 1 2

19" support bracket (for textile gasket) Rear angle (for textile gasket) Side panel type F Front horizontal rail (H-KD) Front horizontal rail IEEE (H-LD) Rear horizontal rail (H-KD) Horizontal rail for backplane assembly (H-ST) Centre horizontal rail (ST) Threaded insert, pre-mounted Insulation strip, mounted Cover EMC EMC shielding material, pre-mounted Rear panel Assembly kit Perforated strip (pre-mounted in item 4 + 4a)

06102067

Order Information Height Width W Depth D U HP mm 3 84 235 6 84 235 Assembly kit, PU 8 x (screw, washer, nut) for assembly of subracks in a 19" case or cabinet

Order no. 24563-152 24563-452 21100-435

For further information www.schroff.biz/oneclick oneClick code = Order no.

06102078

04400001

Rear horizontal rail for backplane assembly

6.10

UK 04/2006

Electronics Packaging

www.schroff.biz

Buch für druck 060413.book Seite 11 Donnerstag, 13. April 2006 5:47 17

Subracks – D Perforated rail for connector EN 60603-2 DIN 41612 Order Information Description Perforated rail with threaded insert M2.5

Qty / PU 4

Order no. 20822-048

Note 쮿 If connectors (IEC 60603-2/DIN 41612) should be mounted, additional perforated rails (1) are to be fitted on the insulation strips on the rear horizontal rails

For further information www.schroff.biz/oneclick oneClick code = Order no.

04502075

Guide rail with coding for CompactPCI and VME64x D

쮿 The guide rails are in accordance with IEEE 1101.10/11, 4 HP wide and can be provided with coding pegs 쮿 Material PBT UL 94 V-0, groove width 2 mm, for printed board width of 1.6 mm 쮿 Colours: – red (CPU-boards) – grey (periphery board) – green (CompactPCI power supply, 0.1" offset)

Order Information Description 06102003

Guide rail on horizontal rail type H

Depth mm 160 160 160

Qty / PU

Guide rail with coding, red 10 Guide rail with coding, grey 10 Guide rail with coding, green, offset 10 ESD-clip for guide rail PU 50 pieces ESD clip for alignment pin of the CompactPCI/ VME64x handles PU 50 pieces Pan head screw with Torx 2.5 × 9.3, zinc-plated, PU 100 pieces Coding peg PC, UL 94 V-0, RAL 7035, PU 100 pieces

Order no. 24560-356 24560-358 24560-359 24560-255 24560-256 24560-141 20817-501

쮿 Further guide rails, see page 6.58 쮿 CompactPCI/VME64x handles, see chapter Plug-in units

04505050

ESD clip for alignment pin

06103052

Electronics Packaging

www.schroff.biz

UK 04/2006

6.11

Buch für druck 060413.book Seite 12 Donnerstag, 13. April 2006 5:47 17

Subracks – D Subrack kit, shielded, for CompactPCI application, for rear I/O D

06102009

Delivery comprises (kit) Item

06105075

Side view 3 U / 6 U

1 2 3 4 4a 4b 4c 4d 5 6 7 8 9 10 11 12

Qty 3U 2 2 2 1 1 2 2 6 2 2 1 1 1 2 2

Description 6U 2 2 2 2 2 2 1 8 4 2 1 1 1 2 2

Order Information Height Width W Depth D U HP mm 3 84 275 6 84 275 Assembly kit, PU 8 x (screw, washer, nut) for assembly of subracks in a 19" case or cabinet

Order no. 24563-157 24563-457 21100-435

For further information www.schroff.biz/oneclick oneClick code = Order no.

06105076

04400001

Rear horizontal rail for backplane assembly

6.12

UK 04/2006

Electronics Packaging

www.schroff.biz

Buch für druck 060413.book Seite 13 Donnerstag, 13. April 2006 5:47 17

Subracks – D Perforated rail for connector EN 60603-2 DIN 41612 Order Information Description Perforated rail with threaded insert M2.5

Qty / PU 4

Order no. 20822-048

Note 쮿 If connectors (IEC 60603-2/DIN 41612) should be mounted, additional perforated rails (1) are to be fitted on the insulation strips on the rear horizontal rails

For further information www.schroff.biz/oneclick oneClick code = Order no.

04502075

Guide rail with coding for CompactPCI and VME64x D

쮿 The Guide rails are in accordance with IEEE 1101.10/11, 4 HP wide and can be provided with coding pegs 쮿 Material PBT UL 94 V-0, groove width 2 mm, for printed board width of 1.6 mm 쮿 Colours: – red (CPU-boards) – grey (periphery board) – green (CompactPCI power supply, 0.1" offset)

Order Information Description 06102003

Guide rail on horizontal rail type H

Depth mm 70 70 160 160 160

Qty / PU

Guide rail with keying/coding, red 10 Guide rail with coding, grey 10 Guide rail with coding, red 10 Guide rail with coding, grey 10 Guide rail with coding, green, offset 10 ESD clip for guide rail PU 50 pieces ESD clip for alignment pin of the CompactPCI/ VME64x handles PU 50 pieces Pan head screw with Torx 2.5 × 9.3, zinc-plated, PU 100 pieces Coding peg PC, UL 94 V-0, RAL 7035, PU 100 pieces

Order no. 24560-355 24560-360 24560-356 24560-358 24560-359 24560-255 24560-256 24560-141 20817-501

쮿 Further guide rails, see page 6.58 쮿 CompactPCI-/ VME64x handle, see chapter Plug-in units 04505050

ESD clip for alignment pin

For further information www.schroff.biz/oneclick oneClick code = Order no.

06103052

Electronics Packaging

www.schroff.biz

UK 04/2006

6.13

Buch fĂźr druck 060413.book Seite 14 Donnerstag, 13. April 2006 5:47 17

Subracks â&#x20AC;&#x201C; D for railway applications Subracks for railway applications Solid structure mechanics Electronics for mobile applications are in need of solid structure mechanics, which will also resist extreme environmental conditions. Our solutions are protecting assembled electronics with high mechanical stability which is an important contribution to the secure and smooth working of the whole system. Only reliability in the smallest detail makes complex safety tasks fulfillable and economical at the same time.

Text

06103001

Shock and vibration Schroff products ensure impact and vibration stability with mobile deployment e. g. by suitable material thickness and fastening parts. Tested with typical additional loads, they offer the best conditions for a safe and reliable existence in individual applications and projects.

02004076

Certification of the mechanics Quality, robust and durable products are an important part of the certification of a complete application in accordance with DIN EN 50 155, BN 411002, NFF 61-005, NF-F 60002.

Note FPCS = Ferroviaire (French) = railway 1 T = 4 HP = 20.32 mm

for railway applications D

6.14

UK 04/2006

Electronics Packaging

www.schroff.biz

Buch für druck 060413.book Seite 15 Donnerstag, 13. April 2006 5:47 17

Subracks – D for railway applications Subrack SNCF, unshielded

쮿 SNCF listed, europacPRO-fer 쮿 Tested to NF F 61-005 and NF F 60-002 쮿 3 U and 6 U, 21 T, 320 mm deep, for board depth 220 mm for railway applications D

Delivery comprises (kit) Item

06104002

3U 2

7 4a + 5

1 6

Qty 3U 2

6U 2

Description

2 3 4 4a 4b 5 6 7 8 9

2 2 2 2 4 1 2 2 1

2 2 2 2 1 6 2 4 2 1

Side panel type H incl. 19" support bracket (for textile gasketing) Side panel extension External guide rail Front horizontal rail (H-KD) Rear horizontal rail (H-VT) Centre horizontal rail at the rear (VT) Threaded strip Rear frame 3 U, 21 T Protective bracket SNCF Handle Assembly part kit with self-locking screws

3 2 4+5

06104050

6U 2

7 4a + 5

4b + 5 6

8 7

3 2

Order Information Height Width Depth U mm mm 3 84 HP (21 T) 320 6 84 HP (21 T) 320 Guide rail, 220 mm deep PU 10 pieces ESD clip for guide rail PU 50 pieces Pan head screw with Torx M2.5 x 9.3, St, zinc-plated, self-locking, PU 100 pieces Coding pin for rear frame, St, white zinc-plated, 1 piece EMC gasket PU 1 kit Cover EMC direct screw fixing on side panel 235 T, PU 1 kit Cover EMC rear side 55 T, PU 1 kit EMC shielding material backplane PU 1 kit Assembly kit, PU 8 x (screw, washer, nut) for assembly of subracks in a 19" case or cabinet

Order no. 21500-029 21500-027 24560-353 24560-255 21500-039 60895-018 21500-036 21500-037 21500-038 21500-035 21100-435

Note 쮿 Version 9 T (36 HP) available on request (1T = 4 HP = 20.32mm) 쮿 Fer = ferroviaire = railway 쮿 For test reports, please see our web pages

For further information www.schroff.biz/oneclick

4+5 1

4a + 5

oneClick code = Order no.

06104051

Coding pin

06104062

Electronics Packaging

www.schroff.biz

UK 04/2006

6.15

Buch für druck 060413.book Seite 16 Donnerstag, 13. April 2006 5:47 17

Subracks – D for railway applications Subrack kit, shielded

쮿 SNCF listed, europacPRO-fer subrack 쮿 Tested in accordance with NFF 61-005 and NFF 60-002 쮿 3 U and 6 U, 21 T, 320 mm deep, for board depth 220 mm 쮿 1 T = 4 HP for railway applications D

Delivery comprises (kit) Item

06104003

3U 4a + 5 12

8 11 10

13 3 2 4+5+6 1

06104052

6U 12

4a + 5

4b + 5 11 10

12 13

Qty 3U 2

6U 2

Description

2 3 4 4a 4b 5 6 7 8 9 10 11 12 13 14

2 2 2 2 4 2 2 2 1 1 1 2 2 1

2 2 2 2 1 6 2 2 2 1 2 2 4 2 1

Side panel type H incl. 19" support bracket (for textile gasketing) Side panel extension External guide rail Front horizontal rail (H-KD) Rear horizontal rail (H-VT) Horizontal rail at the rear centre (VT) Threaded strip Perforated strip Cover EMC 235 T Cover EMC at the rear 55 T EMC kit for gasketing Backplane shielding kit 3 U Rear frame 3 U, 21 T Protective bracket SNCF Handles Assembly part kit with self-locking screws

Order Information Height Width Depth U mm 3 84 HP (21 T) 320 6 84 HP (21 T) 320 Guide rail, 220 mm deep PU 10 pieces ESD clip for guide rail PU 50 pieces Pan head screw with Torx M2.5 x 9.3, St, zinc-plated, self-locking, PU 100 pieces Coding pin for rear frame, St, white zinc-plated, 1 piece Assembly kit, PU 8 x (screw, washer, nut) for assembly of subracks in a 19" case or cabinet

Order no. 21500-030 21500-028 24560-353 24560-255 21500-039 60895-018 21100-435

Note 3 2

쮿 Version 9 T (36 HP) available on request (1T = 4HP = 20.32 mm) 쮿 Fer = ferroviaire = railway 쮿 For test reports, please see our web pages

4+5+6 1

4a + 5

For further information www.schroff.biz/oneclick oneClick code = Order no.

06104053

Coding pin

06104062

6.16

UK 04/2006

Electronics Packaging

www.schroff.biz

Buch für druck 060413.book Seite 17 Donnerstag, 13. April 2006 5:47 17

Subracks – D for railway applications Subrack SNCF, shielded, for CompactPCI applications

쮿 SNCF listed, europacPRO-fer subrack 쮿 Tested in accordance with NFF 61-005 and NFF 60-002 쮿 3 U and 6 U, 21 T, 320 mm deep, for board depth 160 mm 쮿 Subrack in accordance with IEEE 1101.10 for railway applications D

Delivery comprises (kit)

06104004

3U 4a + 5

8 11 10

13 3 2 4+5+6 1

4c + 5 + 6

Item Qty 3U 1 2

6U 2

2 3 4 4a 4b 4c 5 6 7 8 9 10 11 12 13 14

2 2 2 1 2 6 2 2 2 1 2 2 4 2 1

2 2 1 2 1 4 2 2 2 1 1 1 2 2 1

Description Side panel type H incl. 19" support bracket (for textile gasketing) Side panel extension External guide rail Front horizontal rail (H-KD) Rear horizontal rail (H-VT) Centre horizontal rail at the rear (VT) Front horizontal rail (H-LD) Threaded strip Perforated strip Cover EMC 175 T Cover EMC at the rear 55 T EMC kit for gasketing Backplane shielding kit 3 U Rear frame 3 U, 21 T Protective bracket SNCF Handles Assembly part kit with self-locking screws

06104054

12 8

4a + 5

4b + 5

13 1

3 2 4c + 5 + 6

4a + 5

06104055

Coding pin

Order Information Height Width Depth U mm 3 84 HP (21 T) 320 6 84 HP (21 T) 320 Guide rail with coding, red 160 mm deep, PU 10 pieces Guide rail with coding, grey 160 mm deep, PU 10 pieces Guide rail with coding, green, offset 160 mm deep, PU 10 pieces ESD clip for guide rail PU 50 pieces ESD clip for alignment pin of the CompactPCI/ VME64x handles PU 50 pieces Pan head screw with Torx M2.5 x 9.3, St, zinc-plated, self-locking, PU 100 pieces Coding pin for rear frame, St, white zinc-plated, 1 piece Assembly kit, PU 8 x (screw, washer, nut) for assembly of subracks in a 19" case or cabinet

Order no. 21500-047 21500-046 24560-356 24560-358 24560-359 24560-255 24560-256 21500-039 60895-018 21100-435

Note 쮿 Version 9 T (36 HP) available on request (1T = 4HP = 20.32mm) 쮿 Fer = ferroviaire = railway 쮿 Guide rail colour in accordance with to IEEE 1101.10 – red = space for CPU boards – grey = space for peripheral boards – green = space for CompactPCI 19" power supplies 0.1" offset 쮿 For test reports, please see our web pages

06104062

Electronics Packaging

www.schroff.biz

UK 04/2006

6.17

Buch für druck 060413.book Seite 18 Donnerstag, 13. April 2006 5:47 17

Subracks – D for railway applications Subrack EN 50155, unshielded for railway applications D

쮿 Tested in accordance with EN 50155 쮿 3 U and 6 U, 84 HP, 235 mm deep, for board depth 220 mm

Delivery comprises (kit) Item Qty 3U 1 2

6U 2

2 2a 2b 3 4 5

2 2 1 6 2 1

2 2 4 2 1

Description Side panel type H incl. 19" support bracket (for textile gasketing) Front horizontal rail (H-KD) Rear horizontal rail (H-VT) Centre horizontal rail at the rear (VT) Threaded strip Handles Assembly part kit with self-locking screws

06104005

Order Information Height Width B Depth U HP mm 3 84 235 6 84 235 Guide rail, 220 mm deep PU 10 pieces ESD clip for guide rail PU 50 pieces Pan head screw with Torx M2.5 x 9.3, St, zinc-plated, self-locking, PU 100 pieces EMC gasketing PU 1 kit Cover EMC direct screw fixing on side panel 235 T, PU 1 kit EMC shielding material backplane PU 1 kit Assembly kit, PU 8 x (screw, washer, nut) for assembly of subracks in a 19" case or cabinet

1 2a + 3

2+3

06104056

Order no. 21500-077 21500-078 24560-353 24560-255 21500-039 21500-036 21500-037 21500-035 21100-435

Note 쮿 For test reports, please see our web pages

2a + 3

For further information www.schroff.biz/oneclick oneClick code = Order no.

2b + 3

2+3

06104057

6.18

UK 04/2006

Electronics Packaging

www.schroff.biz

Buch für druck 060413.book Seite 19 Donnerstag, 13. April 2006 5:47 17

Subracks – D for railway applications Subrack EN 50155, shielded for railway applications D

쮿 Tested in accordance with EN 50155 쮿 3 U and 6 U, 84 HP, 235 mm deep, for board depth 220 mm

Delivery comprises (kit)

06104006

5 2a + 3 1

2+3+4

8 06104058

Item Qty 3U 1 2

6U 2

2 2a 2b 3 4 5 6 7 8 9

2 2 1 6 2 2 1 2 2 1

2 2 4 2 2 1 1 2 1

Order Information Height Width W Depth D U HP mm 3 84 235 6 84 235 Guide rail, 220 mm deep PU 10 pieces ESD clip for guide rail PU 50 pieces Pan head screw with Torx M2.5 x 9.3, St, zinc-plated, self-locking, PU 100 pieces Assembly kit, PU 8 x (screw, washer, nut) for assembly of subracks in a 19" case or cabinet

Order no. 21500-079 21500-080 24560-353 24560-255 21500-039 21100-435

Note 쮿 For test reports, please see our web pages

6U 5 7 2a + 3

For further information www.schroff.biz/oneclick oneClick code = Order no.

2b + 3 7 1 8

1 2+3+4

2a + 3

06104059

Electronics Packaging

www.schroff.biz

UK 04/2006

6.19

Buch für druck 060413.book Seite 20 Donnerstag, 13. April 2006 5:47 17

Subracks – D for railway applications Subrack EN 50155, shielded, for CompactPCI applications for railway applications D

쮿 Tested in accordance with EN 50155 쮿 3 U and 6 U, 84 HP, 235 mm deep, for board depth 160 mm 쮿 Subrack in accordance with IEEE 1101.10

Delivery comprises (kit)

06104007

3U 7 5 2a + 3 1

Item Qty 3U 1 2

6U 2

2 2a 2b 2c 3 4 5 6 7 8 9

2 1 2 6 2 2 1 2 2 1

1 2 1 4 2 2 1 1 2 1

Description Side panel type H incl. 19" support bracket for textile gasketing Front horizontal rail (H-KD) Rear horizontal rail (H-VT) Centre horizontal rail at the rear (VT) Horizontal rail at the front (H-LD) Threaded strip Perforated strip Cover EMC 175 T EMC kit for gasketing Backplane shielding kit 3 U Handles Assembly part kit with self-locking screws

Order Information

2 + 3 +4

2c +3 +4

8 06104060

6U 5 2a + 3 2b + 3 1

Height Width W Depth D U HP mm 3 84 235 6 84 235 Guide rail with coding, red 160 mm deep, PU 10 pieces Guide rail with coding, grey 160 mm deep, PU 10 pieces Guide rail with coding, green, offset 160 mm deep, PU 10 pieces ESD clip for guide rail PU 50 pieces ESD clip for alignment pin of the CompactPCI/ VME64x handles PU 50 pieces Pan head screw with Torx M2.5 x 9.3, St, zinc-plated, self-locking, PU 100 pieces Assembly kit, PU 8 x (screw, washer, nut) for assembly of subracks in a 19" case or cabinet

Order no. 21500-081 21500-082 24560-356 24560-358 24560-359 24560-255 24560-256 21500-039 21100-435

Note 쮿 Guide rails colour in accordance with IEEE 1101.10 – red = space for CPU-boards – grey = space for periphery boards – green = space for CompactPCI 19" power supplies 0.1" offset 쮿 For test reports, please see our web pages

7 8

1 2c + 3 + 4

For further information www.schroff.biz/oneclick oneClick code = Order no.

8 06104061

6.20

UK 04/2006

Electronics Packaging

www.schroff.biz

Buch für druck 060413.book Seite 21 Donnerstag, 13. April 2006 5:47 17

Subracks – D for railway applications Guide rails for railway applications D

쮿 Material PBT UL 94 V-0, red, groove width 2 mm, for printed board thickness of 1.6 mm

Order Information Description

Depth Qty / PU mm Guide rail, 160 mm deep 160 10 Guide rail, 220 mm deep 220 10 ESD clip for guide rail PU 50 pieces Pan head screw with Torx M2.5 x 9.3, St, zinc-plated, self-locking, PU 100 pieces

Order no. 24560-351 24560-353 24560-255 21500-039

For further information www.schroff.biz/oneclick oneClick code = Order no.

06102001

ESD clip

04503050

Assembly parts for guide rails for railway applications D

Order Information Description Qty / PU Torx screw, M2.5 x 9.3, St, zinc-plated, self100 locking

Order no. 24560-141

aza45922

For further information www.schroff.biz/oneclick oneClick code = Order no.

Electronics Packaging

www.schroff.biz

UK 04/2006

6.21

Buch für druck 060413.book Seite 22 Donnerstag, 13. April 2006 5:47 17

Subracks – D for railway applications Guide rail with coding for CompactPCI and VME64x for railway applications D

쮿 The guide rails are in accordance with IEEE 1101.10/11, 4 HP wide and can be provided with coding pegs 쮿 Material PBT UL 94 V-0, groove width 2 mm, for printed board thickness of 1.6 mm 쮿 Colours: – red (CPU-boards) – grey (periphery board) – green (CompactPCI power supply, 0.1" offset)

Order Information Description 06102003

Guide rail on horizontal rail type H

Depth mm 160 160 160

Qty / PU

Guide rail with coding, red 10 Guide rail with coding, grey 10 Guide rail with coding, green, offset 10 ESD clip for guide rail PU 50 pieces ESD clip for alignment pin of the CompactPCI/ VME64x handles PU 50 pieces Pan head screw with Torx 2.5 × 9.3, zinc-plated, PU 100 pieces Coding peg PC, UL 94 V-0, RAL 7035, PU 100 pieces

Order no. 24560-356 24560-358 24560-359 24560-255 24560-256 24560-141 20817-501

쮿 Further guide rails, see page 6.59 쮿 CompactPCI/VME64x handles, see chapter Plug-in units

04505050

ESD clip for alignment pin

06103052

Coding pin for rear frame for railway applications D

Order Information Description Coding pegs, St, zinc-plated

Qty / PU 1

Order no. 60895-018

For further information www.schroff.biz/oneclick oneClick code = Order no. 06104062

6.22

UK 04/2006

Electronics Packaging

www.schroff.biz

Buch für druck 060413.book Seite 23 Donnerstag, 13. April 2006 5:47 17

Subracks – D for railway applications Cover EMC – direct bolt-on to side panel for railway applications D

쮿 Cover EMC for assembly of 160 mm, 220 mm or 280 mm deep boards / printed boards 쮿 Lateral notches for the assembly of horizontal rails in depths of 160 mm, 220 mm or 280 mm 쮿 Mechanical covering and shielding of the components 쮿 Suitable for any horizontal rails 쮿 Perforation 58 % air flow

Delivery comprises Item 1 06102084

Qty 2

Description Cover, AI, 1.0 mm, hole diameter 4.0 mm, colourless chromated 16 / 32 Screw Torx 4 × 6, self-locking, St, zinc-plated

Order Information Width W HP 84 84 84

Depth D mm 55 175 235

Application

Order no. 21500-038 21500-048 21500-037

– 160 160, 220

Note 쮿 Additional 4 contact strips per subrack are necessary. Contact spring between cover and horizontal rail, see EMC shielding below. 06102082

Contact spring cover - horizontal rail for railway applications D

쮿 Contact spring is clipped into the horizontal rail and provides contact to the cover 쮿 Suitable for all horizontal rails

Delivery comprises X

Item 1

Qty Description 10 / 100 Stainless steel contact spring

Order Information X

X X 06102052

Assembly tools

Width W Length Qty / PU HP mm 42 182.4 10 63 284 10 84 395.7 10 84 395.7 100 Assembly tool for EMC contact strip (horizontal rail), 1 piece

Order no. 24560-241 24560-243 24560-245 24560-246 24560-271

Note 쮿 When using a rear hood the contact strip forms a conductive connection between horizontal rail and the hood aza45938

Electronics Packaging

www.schroff.biz

UK 04/2006

6.23

Buch für druck 060413.book Seite 24 Donnerstag, 13. April 2006 5:47 17

Subracks – D Accessories Configuration with components from the catalogue Accessories D

Configuration of individual subracks: 쮿 Side panels, see page 6.25 쮿 Horizontal rails, see page 6.30 쮿 Covers, see page 6.36 쮿 EMC components, see page 6.41 쮿 Internal configuration, see page 6.47 쮿 Guide rails, see page 6.58 쮿 Further accessories, see page 6.61

06105058

Configuration on the internet Accessories D

Configuration of individual subracks on the internet.

For further information www.schroff.biz/oneclick oneClick code = Order no.

6.24

UK 04/2006

Electronics Packaging

www.schroff.biz

Buch für druck 060413.book Seite 25 Donnerstag, 13. April 2006 5:47 17

Subracks – D Accessories Side panels There are 3 different side panels. Type F (Flexible) 쮿 Variable assembly of 19" bracket at front or rear possible 쮿 Flat side panel 쮿 Can be shielded 쮿 2 shielding concepts – with stainless steel gasket – with textile gasket

06197003

Type L (Light) 쮿 19" mounting angle integrated 쮿 Good value

06197002

Type H (Heavy) 쮿 19" bracket tox fixing 쮿 For high mechanical demands (e.g. shock and vibration in accordance with railway standards)

06197004

Electronics Packaging

www.schroff.biz

UK 04/2006

6.25

Buch für druck 060413.book Seite 26 Donnerstag, 13. April 2006 5:47 17

Subracks – D Accessories Side panel type F, 19" bracket, rear angle, for stainless steel gasket Accessories D

Order Information Side panel type F

06197003

Height Depth U mm 3 175 3 235 3 295 3 277.75 3 295 3 355 3 415 3 475 4 175 4 235 4 295 4 355 4 415 4 475 5 175 5 235 5 295 5 355 6 175 6 235 6 295 6 277.75 6 295 6 355 6 415 6 475 6 475 9 175 9 235 9 295 9 355 9 415 Screw, M4 x 14, PU 100 pieces 1) CompactPCI

1) 2)

3) 3) 3) 3) 3) 3) 4) 4) 4) 4)

1) 2)

19" bracket 19" bracket with without handle handle holes holes

bza45819

19" bracket depthadjustable

bza45819

Wall-mounting bracket

06102501

Rear angle for stainless steel gasket

06104063

EMC stainless steel gasket

BZA46573

BGA45760

Without 19“ bracket, Al, 2 mm, passivated, please order 19“ bracket and rear angle separately

With lateral slot for EMC contact strip, Al extrusion, rear side passivated, front anodised

With lateral slot for EMC contact strip, Al extrusion, rear side passivated, front anodised, please order front handle separately

Al extrusion, passivated

Screw fixed on the subrack instead of the 19" bracket, Al, 2.5 mm, passivated

With lateral slot for EMC contact strip, Al extrusion, rear side passivated, front anodised

Lateral insertion in slot of the front panel, stainless steel

1 piece

PU 2 pieces

PU 10 pieces

24560-197

24560-198

24560-199

24562-197

24561-198

21101-705

24560-297

24560-298

24560-299

24562-297

24561-298

21101-713

24560-397

24560-398

24560-399

24562-397

24561-398

21101-777

24560-497

24560-498

24560-499

24562-497

24561-498

21101-707

24560-797

24560-798

24560-799

24562-797

24561-798

21101-709

24560-130

–

24560-130

–

34560-185 34560-187 34579-300 34579-002 34560-189 34560-191 34560-193 34560-195 34560-285 34560-287 34560-289 34560-291 34560-293 34560-295 34560-385 34560-387 34560-389 34560-391 34560-485 34560-487 34579-038 34579-012 34560-489 34560-491 34560-493 34560-495 34560-496 34560-785 34560-787 34560-789 34560-791 34560-793 24560-130

2) VME64x 3) Grid holes of side panel 3 + 1 U 4) Grid holes of side panel 1+3 + 1 U

Note 쮿 Screws are used for assembly of the side panel, 19" bracket and rear angle on the horizontal rail 6.26

UK 04/2006

Electronics Packaging

www.schroff.biz

Buch für druck 060413.book Seite 27 Dienstag, 18. April 2006 1:09 13

Subracks – D Accessories Side panel type F, 19" bracket, rear angle, for textile gasket Accessories D

Order Information Side panel type F

06197003

1) 2)

3) 3) 3) 3) 3) 3) 4) 4) 4) 4)

1) 2)

19" bracket 19" bracket with without handle handle holes holes

bza45819

19" bracket depthadjustable

bza45819

Wall-mounting bracket

Rear angle

EMC textile gasket

06102501

06104063

BZA46573

01802056

Without 19“ bracket, Al, 2 mm, passivated, please order 19“ bracket and rear angle separately

Al extrusion for textile gasketing, rear passivated, front anodised

Al extrusion for textile gasketing, rear side passivated, front anodised, please order front handle separately

Al extrusion, passivated

Screw fixed on the subrack instead of the 19" bracket, Al, 2.5 mm, passivated

Al extrusion for textile gasketing, rear passivated, front anodised

Textile gasketing, core: foam, sleeve: textile cladding with CuNi coating, UL 94V-0

1 piece

PU 2 pieces

PU 10 pieces

24564-197

24564-198

24560-199

24562-197

24564-199

21101-853

24564-297

24564-298

24560-299

24562-297

24564-299

21101-858

24564-397

24564-398

24560-399

24562-397

24564-399

21101-978

24564-497

24564-498

24560-499

24562-497

24564-499

21101-855

24564-797

24564-798

24560-799

24562-797

24564-799

21101-709

24560-130

–

24560-130

–

2) VME64x 3) Grid holes of side panel 3 + 1 U 4) Grid holes of side panel 1+3 + 1 U

Note 쮿 Screws are needed for assembly of the side panel, 19" bracket and rear angle on the horizontal rail Electronics Packaging

www.schroff.biz

UK 04/2006

6.27

Buch für druck 060413.book Seite 28 Dienstag, 18. April 2006 11:43 11

Subracks – D Accessories Side panels type L Accessories D

Order Information Side panel type L

Front cover for type L

06197002

Height Depth U mm 3 175 3 235 3 295 6 175 6 235 6 295 Screw, M4 x 14, PU 100 pieces

bza45819

Al, 2 mm, passivated

As decorative trim of the 19" bracket, Al, 2 mm, anodised

1 piece

34561-185 34561-187 34561-189 34561-485 34561-487 34561-489 24560-130

34561-197

34561-497

–

Side panels, type H Accessories D

Order Information Side panel type H for stainless steel gaskets Without handle With handle EMC stainless holes holes steel gasket

06197004

Height Depth U mm 3 175 3 235 3 295 3 355 6 175 6 235 6 295 6 355 Screw, M4 x 14, PU 100 pieces

06197004

BGA45760

Without handle holes

Side panel type H With handle holes

06197004

For high mechanical demands, 19" bracket (Torx), Al, 2 mm, passivated, front anodised, order front handle separately

Lateral insertion in slot of the front panel, stainless steel

For high mechanical demands, 19" bracket (Torx), Al, 2 mm, passivated, front anodised

PU 2 pieces

PU 10 pieces

PU 2 pieces

24566-125 24566-127 24566-129 24566-131 24566-425 24566-427 24566-429 24566-431 24560-130

24567-125 24567-127 24567-129 24567-131 24567-425 24567-427 24567-429 24567-431 24560-130

24564-145 24564-147 24566-149 24564-151 24564-445 24564-447 24564-449 24564-451 24560-130

24566-145 24566-147 24566-149 24566-151 24566-445 24566-447 24566-449 24566-451 24560-130

21101-707

–

01802056

Textile gasketing, For high core: foam, sleeve: mechanical textile cladding with demands, CuNi coating, 19" bracket (Torx), UL 94V-0 Al, 2 mm, passivated, front anodised, order front handle separately

For high mechanical demands, 19" bracket (Torx), Al, 2 mm, passivated, front anodised

21101-705

EMC textile gasket

PU 10 pieces

21101-853

21101-855

–

Note 쮿 Screws are needed for the assembly of the side panel on the horizontal rail

6.28

UK 04/2006

Electronics Packaging

www.schroff.biz

Buch für druck 060413.book Seite 29 Donnerstag, 13. April 2006 5:47 17

Subracks – D Accessories Side panel adapter bracket Accessories D

쮿 To connect side panels (all types)

Order Information Description Adapter bracket, Zn die-cast, incl. assembly kit

Qty / PU 4

Order no. 21101-954

Note 쮿 Sufficient for the connection of two subracks

For further information www.schroff.biz/oneclick oneClick code = Order no.

BPA45867

BPA45868

Front handles Accessories D

Order Information Front handle clear anodised

Front handle black anodised

Universal front handle

Two-part handle PA, UL 94 HB, dark grey, spacer Al extrusion, anodised BZA42327 Height X U mm SPQ 1) 10 pieces SPQ 1) 10 pieces SPQ 1) 10 pieces 3 88 10501-005 10501-026 10502-057 4 133.4 – – 10501-018 5 180 10501-007 10501-028 10502-063 6, 9 U 235 10501-008 10501-029 10502-065 Screw M5 x 12, PU 100 pieces 24560-183 24560-183 24560-183 Screw M5 x 12, PU 4 pieces 24560-182 24560-182 24560-182 1) Delivery may be in Standard Pack Quantity (SPQ). Please order the ’SPQ’ quantity or a multiple. Pricing is per individual item.

Electronics Packaging

www.schroff.biz

UK 04/2006

BPA45855

6.29

Buch für druck 060413.book Seite 30 Donnerstag, 13. April 2006 5:47 17

Subracks – D Accessories Front horizontal rail Assembly 3 U, 2 x 3 U, 6 U 3U

Light

Heavy

bza44980

bza44974

06105060

06105061

bza44972

06105062

06105063

06105059

06105064

06105065

2x3U

2 x 3 U, 6 U

Abbreviations Text

L-OD = Light - without lip

06197006

L-KD = Light - short lip

H-KD = Heavy - short lip

H-LD = Heavy - long lip

Text

06197007

06197008

06197009

Accessories D

6.30

UK 04/2006

Electronics Packaging

www.schroff.biz

Buch für druck 060413.book Seite 31 Donnerstag, 13. April 2006 5:47 17

Subracks – D Accessories Front horizontal rails Accessories D

Order Information Type L-OD light without lip

Type L-KD light short lip

06197006

For assembly at front top or bottom, with HP print 쏜 28 HP, Al extrusion, finish anodised, contact surface conductive

For assembly behind front panel

06197007

Standard rail front

Type H-KD robust short lip

06197008

For high mechanical demands

Type H-LD robust long lip

06197009

CompactPCI, VME64x systems

Type DH-LD very stable long lip

06102010

Finish passivated, no printing, special version

Usable length Length SPQ 1) SPQ 1) SPQ 1) SPQ 1) SPQ 1) 10 pieces 10 pieces 10 pieces 10 pieces 10 pieces HP mm 20 106.68 – 34560-020 34560-120 34560-220 34560-320 28 147.32 34560-028 34560-128 34560-228 34560-328 34562-928 40 208.28 – 34560-040 34560-140 34560-240 34560-340 42 218.44 34560-042 34560-142 34560-242 34560-342 34562-942 63 325.12 34560-063 34560-163 34560-263 34560-363 34562-963 84 431.8 34560-084 34560-184 34560-284 34560-384 34562-984 – 1000 34560-001 34560-101 34560-201 34560-301 34562-901 Screw, M4 x 14, PU 100 pieces 24560-130 24560-130 24560-130 24560-130 24560-130 Screw, M4 x 10, necessary if guide rail is screwed on slot 1, PU 100 pieces 24560-155 24560-155 24560-155 1) Delivery may be in Standard Pack Quantity (SPQ). Please order the ’SPQ’ quantity or a multiple. Pricing is per individual item.

Electronics Packaging

www.schroff.biz

UK 04/2006

6.31

Buch für druck 060413.book Seite 32 Donnerstag, 13. April 2006 5:47 17

Subracks – D Accessories Horizontal rail rear Text

06105074 bza44981

Indirect backplane assembly (with insulation strip) 1a / 1b

Direct backplane assembly

Connector assembly with Z

2a / 2b

3a / 3b

06105072

06105073

06105071

04400001

04400002

04400003

Abbreviations Text

ST = standard

VT = + 3 mm

06197016

6.32

UK 04/2006

MZ = with Z

Text

06197017

Electronics Packaging

06197018

www.schroff.biz

6_11_europacPRO_e_.fm Seite 33 Dienstag, 18. April 2006 12:18 12

Subracks – D Accessories Rear horizontal rails Accessories D

Order Information Type L-ST light standard

06197010

For assembly at front top or bottom, with HP print 쏜 28 HP, Al extrusion, finish anodised, contact surface conductive

For indirect mounting of backplanes with insulation strip, please order insulation strip separately

Type H-ST robust standard

Type L-VT light + 3 mm

06197011

BZA45782

For direct backplane assembly

For indirect mounting of backplanes with insulation strip, please order insulation strip separately

Type H-VT stable + 3 mm

06197009

For direct backplane assembly

Type L-MZ light, with Z-rail

Type H-MZ robust with Z-rail

06197014

For direct mounting of connectors in accordance with EN 60603-2 (DIN 41612)

Usable length Length SPQ 1) SPQ 1) SPQ 1) SPQ 1) SPQ 1) 10 pieces 10 pieces 10 pieces 10 pieces 10 pieces HP mm 20 106.68 – – – – – 28 147.32 34560-428 34560-528 34560-628 34560-728 34560-828 40 208.28 – – – – – 42 218.44 34560-442 34560-542 34560-642 34560-742 34560-842 63 325.12 34560-463 34560-563 34560-663 34560-763 34560-863 84 431.8 34560-484 34560-584 34560-684 34560-784 34560-884 – 1000 34560-401 34560-501 34560-601 34560-701 34560-801 Screw, M4 x 14, PU 100 pieces 24560-130 24560-130 24560-130 24560-130 24560-130 Screw, M4 x 10, necessary if guide rail is screwed on – – 24560-155 24560-155 slot 1, PU 100 pieces 1) Delivery may be in Standard Pack Quantity (SPQ). Please order the ’SPQ’ quantity or a multiple. Pricing is per individual item.

06197015

For direct mounting of connectors in accordance with EN 60603-2 (DIN 41612)

SPQ 1) 10 pieces – 34560-928

– 34560-942 34560-963 34560-984 34560-901 24560-130 24560-155

Rear horizontal rails, for subracks 6 and 9 U Accessories D

Order Information Type ST

06197016

For assembly between top and bottom horizontal rail, Al extrusion, finish anodised

For indirect mounting of backplanes with insulation strip, please order insulation strip separately

Type VT

06197017

For direct backplane assembly

Type MZ

06197018

For direct mounting of connectors in accordance with EN 60603 (DIN 41612)

Type AB

06197009

For CompactPCI rear I/O boards

Usable length Length SPQ 1) SPQ 1) SPQ 1) SPQ 1) 10 pieces 10 pieces 10 pieces 10 pieces HP mm 20 106.68 – – – 34561-520 28 147.32 34561-028 34561-128 34561-228 34561-528 40 208.28 – – – 34561-540 42 218.44 34561-042 34561-142 34561-242 34561-542 63 325.12 34561-063 34561-163 34561-263 34561-563 84 431.8 34561-084 34561-184 34561-284 34561-584 – 1000 34561-001 34561-101 34561-201 34561-501 Screw, M4 x 14, PU 100 pieces 24560-130 24560-130 24560-130 24560-130 1) Delivery may be in Standard Pack Quantity (SPQ). Please order the ’SPQ’ quantity or a multiple. Pricing is per individual item.

Electronics Packaging

www.schroff.biz

UK 04/2006

6.33

Buch für druck 060413.book Seite 34 Donnerstag, 13. April 2006 5:47 17

Subracks – D Accessories Threaded inserts, perforated strips, insulation strips Accessories D

Order Information Threaded inserts

Perforated strips

Insulation strips Item 1

5,0

06103056

BZA45853

Required for assembly of front panels on the horizontal rail; use collar screw 12.3 mm, see page 6.67

Usable length HP

Threaded inserts Length mm

M2.5 SPQ 1) 10 pieces

Perforated strips Length mm

M3 SPQ 1) 10 pieces – – – – –

BZ6749

For centring of shielded plug-in units, Al, 1 mm, please order grub screw for fixing separately

SPQ 1) 10 pieces

BZ6749

For the indirect assembly of backplanes

Insulation strips Length mm

1 piece

SPQ 1) 10 pieces

20 106.18 106.48 – 34561-320 30845-189 101.5 30835-109 28 147.32 147.12 – 34561-328 30845-197 144.2 30835-110 40 207.78 208.08 – – 34561-340 30845-209 218.24 – 42 217.94 34561-342 30845-211 210.4 60817-118 63 324.62 324.92 – 34561-363 30845-232 316.88 30894-444 84 431.3 – 34561-384 34561-484 431.6 30845-253 428.64 60817-061 Grub screw M2.5 x 8, PU 100 pieces – – – 21100-276 – Grub screw M2.5 x 9, PU 100 pieces – – 21101-359 Grub screw M3 x 8, PU 100 pieces – – – 21100-646 1) Delivery may be in Standard Pack Quantity (SPQ). Please order the ’SPQ’ quantity or a multiple. Pricing is per individual item.

Z-rail, perforated strip Accessories D

Order Information IEC 606032 EN 41612

Z-rails For connectors, 31Pin, DIN41617

BZA45849

Usable length Length HP mm 20 106.68 28 142.24 40 203.2 42 213.36 60 304.8 84 426.7 Screw M2.5 x 7, PU 100 pieces Screw M2.5 x 10, PU 100 pieces

6.34

UK 04/2006

Perforated rail EN 60603-2, DIN 41612

BZA45850

BZA45848

For the assembly of connectors with ST horizontal rail, please order threaded inserts and screw separately

For the assembly of connectors; please order threaded inserts and screw for horizontal rail separately

For connector assembly on RC horizontal rails, please order threaded insert and screw separately

1 piece –

1 piece – –

PU 4 pieces –

30822-033 30822-045 30822-047 30822-065 30822-089 24560-147

–

20822-049

30819-763

–

20822-050 20822-047 20822-048

30819-783 30819-808 24560-147

–

Electronics Packaging

– 24560-148

www.schroff.biz

Buch für druck 060413.book Seite 35 Donnerstag, 13. April 2006 5:47 17

Subracks – D Accessories Front panel as rear panel 쮿 Please order front panel as rear panel separately, see chapter Front panels

04292001

Rear hood for subracks Accessories

쮿 The rear hood is deployed as a shielded finish on the rear side. The rear hood requires 60 mm space. Therefore the side panel depth has to be 60 mm larger than the board depth if a rear hood is used. Example: For a board depth of 160 mm a side panel of 235 mm (175 mm + 60 mm, with rear hood) is needed. 쮿 The contact from the rear hood to the horizontal rails is achieved by means of the contact strip for the cover plate. Therefore no additional contact strips are necessary.

Delivery comprises Item 1

Qty 1

Description Rear hood, AI, 1 mm, passivated

BZA45814

Order Information Height Width B U HP 3 42 3 63 3 84 6 63 6 84 Pan head screw Torx screw, M4 × 6, St, zinc-plated, PU 100 pieces

Order no. 34561-750 34561-751 34561-752 34561-763 34561-764 24560-135

Note 쮿 Required quantity of screws per rear hood – 3 U subrack 10 screws – 6 U subrack 16 screws

For further information www.schroff.biz/oneclick oneClick code = Order no.

Electronics Packaging

www.schroff.biz

UK 04/2006

6.35

Buch für druck 060413.book Seite 36 Donnerstag, 13. April 2006 5:47 17

Subracks – D Accessories Covers Accessories D

쮿 Mechanical covers for the components (cover Standard) 쮿 Mechanical covers and EMC shielding (cover EMC) – Direct screw-on fixing – Universal

Standard cover Accessories D

쮿 Mechanical cover for the components 쮿 For sliding in the slot of the light horizontal rail (type L) 쮿 Perforation approx. 60 % air flow

Delivery comprises Item 1

Qty 2

Description Cover (1), AI perforated plate 1.2 mm, hole diameter 3.8 mm, untreated

Order Information

04502068

Width W HP 42 63 84 84

Depth mm 160 160 160 220

Order no. 24561-031 24561-041 24561-051 24561-052

Note 쮿 Standard cover can only be used with horizontal rail type "L" (Light)

6.36

UK 04/2006

Electronics Packaging

www.schroff.biz

Buch für druck 060413.book Seite 37 Donnerstag, 13. April 2006 5:47 17

Subracks – D Accessories Cover EMC – direct screw-on fixing on the side panel Accessories D

쮿 Suitable for any horizontal rails 쮿 Cover for assembly of 160 mm, 220 mm or 280 mm deep boards / printed boards 쮿 Lateral notches for the assembly of horizontal rails in a depth of 160 mm, 220 mm or 280 mm 쮿 Mechanical covering and shielding of the components 쮿 Perforation 58 % air flow

Delivery comprises Item 1 2

Qty Description 2 Cover , AI, 1.0 mm, hole diameter 4.0 mm, chromated 16 / 32 Screw Torx 4 × 6, self-locking, St, zinc-plated

06102084

Order Information

06102082

Width W HP 42 42 42 63 63 63 84 84 84 84 84 84

Depth D mm 175 235 295 175 235 295 175 235 295 355 415 475

Application 160 160, 220 160, 220 160 160, 220 160, 220 160 160, 220 160, 220 160, 220, 280 160, 220, 280 160, 220, 280

Order no. 24560-064 24560-065 24560-066 24560-071 24560-072 24560-073 24560-078 24560-079 24560-080 24560-081 24560-082 24560-083

쮿 In addition, 4 contact strips per subrack are required. Contact strips between cover and horizontal rail, see EMC shielding, page 6.41

For further information www.schroff.biz/oneclick oneClick code = Order no.

Electronics Packaging

www.schroff.biz

UK 04/2006

6.37

Buch für druck 060413.book Seite 38 Donnerstag, 13. April 2006 5:47 17

Subracks – D Accessories Cover EMC, direct screw-on fixing on the side panel, 275 mm deep (CompactPCI) Accessories D

쮿 Suitable for any horizontal rails 쮿 Cover for 275 mm deep CompactPCI systems with boards 160 mm (front) and 80 mm (rear I/0) 쮿 Mechanical covering and shielding of the components 쮿 Perforation 58 % air flow

Delivery comprises Item 1 2

Qty 2 16

Description Cover, AI, 1.0 mm, hole diameter 4.0 mm, chromated Screw Torx 4 × 6, St, zinc-plated

Order Information 06102084

Width W HP 42 63 84

Depth D mm 275 275 275

Application 275 275 275

Order no. 24560-061 24560-062 24560-063

쮿 In addition, 4 contact strips per subrack are required. Contact strips between cover and horizontal rail, see EMC shielding, page 6.41

For further information www.schroff.biz/oneclick oneClick code = Order no.

06105055

6.38

UK 04/2006

Electronics Packaging

www.schroff.biz

Buch für druck 060413.book Seite 39 Donnerstag, 13. April 2006 5:47 17

Subracks – D Accessories Cover EMC, direct screw-on fixing on the side panel, 277.75 mm deep (VME64x) Accessories D

쮿 Suitable for any horizontal rails 쮿 Cover for VME64x System (277.75 mm deep) with 160 mm boards (front) and 80 mm (rear I/O) 쮿 Suitable for any horizontal rails 쮿 Perforation 58 % air flow

Delivery comprises Item 1 2

Qty 2 16

Description Cover, AI, 1.0 mm, hole diameter 4.0 mm, chromated Torx screws 4 × 6, St, zinc-plated

Order Information 06102084

Width mm 42 84

Depth mm 277.75 277.75

Order no. 24579-090 24579-092

쮿 In addition, 4 contact strips per subrack are required. Contact strips between cover and horizontal rail, see EMC shielding, page 6.41

For further information www.schroff.biz/oneclick oneClick code = Order no.

06105056

Electronics Packaging

www.schroff.biz

UK 04/2006

6.39

Buch für druck 060413.book Seite 40 Donnerstag, 13. April 2006 5:47 17

Subracks – D Accessories Cover EMC, universal, for special board depth Accessories D

쮿 Suitable for all horizontal rails 쮿 Mechanical cover and shielding for components 쮿 Perforation 58 % air flow 쮿 For variable positioning of the horizontal rail on e.g. boards with special sizes

Delivery comprises Item 1

Qty 2

Description Cover, AI perforated, 0.8 mm, hole diameter 4.0 mm, passivated Contact strip, stainless steel: 4 pieces up to 295 mm depth, 6 pieces up to 355 mm depth, 8 pieces from 415 mm depth Torx screws 4 × 6, pentaform, St, zinc-plated

Order Information 06105082

Width W HP 42 42 42 63 63 63 84 84 84 84 84 84

Depth mm 175 235 295 175 235 295 175 235 295 355 415 475

Order no. 24560-031 24560-032 24560-033 24560-041 24560-042 24560-043 24560-051 24560-052 24560-053 24560-054 24560-055 24560-056

쮿 In addition, 4 contact strips per subrack are required. Contact strips between cover and horizontal rail, see EMC shielding, page 6.41

For further information www.schroff.biz/oneclick oneClick code = Order no.

6.40

UK 04/2006

Electronics Packaging

www.schroff.biz

Buch für druck 060413.book Seite 41 Donnerstag, 13. April 2006 5:47 17

Subracks – D Accessories EMC shielding EMC accessories consist of contact strips which create an uninterrupted EMC connection between the individual components. 1.) Shielding between cover and horizontal rail (rear hood) 2.) Shielding between cover and side panel 3.) Shielding between front panel and horizontal rail 4.) Shielding between front panel and support bracket/rear angle 5.) Shielding between horizontal rails (divided version), not illustrated 6.) Shielding between front panel and side panel (recessed installation) 7.) Shielding between backplane and side panel (not illustrated)

06103053

Contact spring cover - side panel Accessories D

Delivery comprises Item 1

Qty 10

Description Stainless steel contact spring

Order Information Description Contact spring cover - side panel Torx pan head screw M4 × 6 pentaform, St, zincplated, PU 100 pieces

Order no. 24560-251 21101-884

Note 쮿 Delivery of the Cover EMC includes the contact strips

BPA45869

For further information www.schroff.biz/oneclick oneClick code = Order no.

BPA45872

Electronics Packaging

www.schroff.biz

UK 04/2006

6.41

Buch für druck 060413.book Seite 42 Donnerstag, 13. April 2006 5:47 17

Subracks – D Accessories Contact spring cover - horizontal rail Accessories D

쮿 Contact spring is clipped into the horizontal rail and provides contact to the Cover EMC 쮿 Suitable for all horizontal rails X

Delivery comprises Item 1

Qty Description 10 / 100 Stainless steel contact spring

Order Information X

X X 06102052

Assembly tools

Width Length Qty / PU HP mm 42 182.4 10 63 284 10 84 395.7 10 84 395.7 100 Assembly tool for EMC contact strip (horizontal rail), 1 piece

Order no. 24560-241 24560-243 24560-245 24560-246 24560-271

Note 쮿 When using a rear hood the contact strip forms a conductive connection between horizontal rail and the hood

For further information www.schroff.biz/oneclick oneClick code = Order no.

aza45938

EMC contact strips front panel / rear panel horizontal rail Accessories D

쮿 The contact strip is clipped onto the horizontal rail and provides the contact to the front panel or rear panel 쮿 Applicable for horizontal rails front / rear (VT)

Delivery comprises Item 1

Qty Description 10 / 100 EMC gasketing, stainless steel

Order Information

06102053

Width W HP 28 42 63 84 84

Length mm 131.78 202.9 304.5 416.56 416.56

Qty / PU 10 10 10 10 100

Order no. 24560-229 24560-231 24560-233 24560-235 24560-236

For further information www.schroff.biz/oneclick oneClick code = Order no.

6.42

UK 04/2006

Electronics Packaging

www.schroff.biz

Buch für druck 060413.book Seite 43 Donnerstag, 13. April 2006 5:47 17

Subracks – D Accessories Stainless steel gasketing for front panel, 19" bracket / rear angle Accessories D

쮿 The stainless steel gasketing has to be pushed in the lateral slots of the shielded front panel, 19" bracket, or rear angle

Delivery comprises Item 1

Qty Description 10 / 100 Gasket, stainless steel

Order Information

06105077

Height Qty / PU U 3 10 3 100 4 10 4 100 5 10 6 10 6 100 9 10 9 100 Assembly tool for EMC contact strip (front panel with slot), 1 piece

Order no. 21101-705 21101-706 21101-713 21101-714 21101-777 21101-707 21101-708 21101-709 21101-710 24560-270

aza45937

Assembly tools

Textile fabric for front panel, 19" bracket / rear angle Accessories D

쮿 The textile fabric is stuck onto the contact surface of the 19" bracket or rear angle and provides a conductive connection to the U front panel

Delivery comprises Item 1

Description EMC textile gasketing, foam: core, sleeve: textile cladding with CuNi coating.

Order Information

06102056

Height U 3 3 4 5 6 6 9 9

Qty / PU 10 100 10 10 10 100 10 100

Order no. 21101-853 21101-854 21101-858 21101-978 21101-855 21101-856 21101-859 21101-904

For further information www.schroff.biz/oneclick oneClick code = Order no.

Electronics Packaging

www.schroff.biz

UK 04/2006

6.43

Buch für druck 060413.book Seite 44 Donnerstag, 13. April 2006 5:47 17

europacPRO – D Accessories EMC gasketing, horizontal rails Accessories D

쮿 For shielding of 2 horizontal rails located one directly above the other with vertical division of the mounting height

Delivery comprises (kit) Item 1 2

Qty 1 2

Description Contact strip, Al, 1 mm Contact spring, stainless steel

Order Information

BPA46548

Length HP 20 28 40 42 63 84

Order no. 24562-520 24562-528 24562-540 24562-542 24562-563 24562-584

Delivery may be in Standard Pack Quantity: Please order 10 pieces or a multiple. Pricing is per individual item.

For further information www.schroff.biz/oneclick oneClick code = Order no.

BZA45877

Shielding front panel-side panel (recessed installation) for textile gaskets Accessories D

쮿 For vertical EMC shielding between recessed, shielded front panels and side panel

Delivery comprises Item 1 2

Qty 2 1

Description EMC contact strip, Al extrusion Assembly kit

Order Information Height U 3 4 6

Height mm 110 154.45 243.35

Order no. 24560-180 24560-280 24560-480

쮿 EMC textile gasketing, see chapter Front panels

06102058

For further information www.schroff.biz/oneclick oneClick code = Order no.

6.44

UK 04/2006

Electronics Packaging

www.schroff.biz

Buch für druck 060413.book Seite 45 Donnerstag, 13. April 2006 5:47 17

Subracks – D Accessories Shielding front panel - side panel (recessed installation) for stainless steel shielding Accessories D

쮿 For vertical EMC shielding between offset, shielded front panels and side panel

Delivery comprises Item 1 2

Qty 2 1

Description EMC contact strip, Al extrusion Assembly kit

Order Information Height U 3 4 6

Height mm 110 154.45 243.35

Order no. 24562-199 24562-299 24562-499

쮿 EMC stainless steel shielding, see chapter Front panels

For further information www.schroff.biz/oneclick oneClick code = Order no. 06105081 bpa45884

Shielding backplane / side panel Accessories D

쮿 If the design is appropriate, the backplane can be used as the shielding rear panel of the subrack. To implement this, a rear horizontal rail (type L-RC or H-RC) must be used to ensure the horizontal contact. 쮿 For the vertical contact the contact strip can be assembled on the europacPRO side panel (grid 30 mm).

Delivery comprises Item 1 2

Qty 2 1

Description EMC contact strip, AI extrusion Kit stainless steel contact springs

Order Information 06102057

Height U 3 6 Torx screw M4 x 5, finish zinc-plated, PU 100 pieces Square nuts M4, St, zinc-plated, PU 100 pieces

Order no. 24561-199 24561-499 24560-139 24560-140

Note 쮿 For 6 U subracks please order two 3 U kits

For further information www.schroff.biz/oneclick oneClick code = Order no.

BPA45916

Electronics Packaging

www.schroff.biz

UK 04/2006

6.45

Buch für druck 060413.book Seite 46 Donnerstag, 13. April 2006 5:47 17

Subracks – D Accessories Panel, trim Accessories D

쮿 For front visual finish of the subrack, top and bottom, when installed in control panels 쮿 Screw fixed onto the front horizontal rail

Delivery comprises Item 1

Qty 1

Description Panel trim, Al extrusion, anodised

Order Information

06197021

Usable width Length HP mm 42 269.2 63 375.9 84 482.6 Pan head screw with Torx 2.5 × 9.3, zinc-plated, PU 100 pieces

Order no. 34561-777 34561-778 34561-779 24560-141

Note 쮿 Two panel trims and four screws are required per subrack

For further information www.schroff.biz/oneclick oneClick code = Order no.

06105067

Assembly cut-out

06105066

Dimensions table U

3 3 3 6 6 6

42 63 84 42 63 84

6.46

A mm 237.0 343.0 450.0 237.0 343.0 450.0

UK 04/2006

B mm 145.0 145.0 145.0 278.5 278.5 278.5

C mm 252.0 358.5 465.0 252.0 358.5 465.0

D mm 57.15 57.15 57.15 190.5 190.5 190.5

E mm 269.2 375.9 482.6 269.2 375.9 482.6

F mm 179.4 179.4 179.4 312.7 312.7 312.7

Electronics Packaging

www.schroff.biz

Buch für druck 060413.book Seite 47 Donnerstag, 13. April 2006 5:47 17

Subracks – D Accessories Internal configuration You will find all the components for internal assembly here 쮿 Divider plate 쮿 Chassis plate 쮿 Subrack conversion kit, horizontal board mounting 쮿 Subrack conversion kit for mixed board mounting (6 U/2 × 3 U) 쮿 Support member 6 U

Divider plate Accessories D

쮿 Assembly by clipping into horizontal rails 쮿 Space requirement on component side: 2.0 mm

Delivery comprises Item 1

Qty 1

Description Divider plate, 1 mm stainless steel

Order Information

BPA45912

Height U 3 3 6 6

Depth mm 160 220 160 220

A mm 158.3 218.3 158.3 218.3

B mm 135 195 135 195

H mm 113.55 113.55 246.9 246.9

Order no. 34562-761 34562-762 34562-763 34562-764

Stainless steel gasketing

Note 쮿 Subsequent installation of the divider plate in a mounted subrack requires removal of the horizontal rails beforehand

For further information www.schroff.biz/oneclick oneClick code = Order no.

BPA45911

front

rear

Textile gasketing (assembly position)

06105078

front

Electronics Packaging

rear

www.schroff.biz

UK 04/2006

6.47

Buch für druck 060413.book Seite 48 Donnerstag, 13. April 2006 5:47 17

Subracks – D Accessories Chassis plate Chassis plate full width

Accessories D

쮿 For assembly of heavy accessories 쮿 Chassis plate full width The chassis plate is as wide as the subrack case and is fixed on the side panel. 쮿 Chassis plate partial width The chassis plate in partial width is assembled on a side panel with one mounting strip.

Delivery comprises Item 1

Qty 1

Description Chassis plate, Al, 1.5 mm

Order Information

BPA45875

Chassis plate partial width

Width W W w n Board height HP mm mm mm 28 146.88 137.16 1 160 28 146.88 137.16 2 220 28 146.88 137.16 4 340 42 217.99 208.28 1 160 42 217.99 208.28 2 220 42 217.99 208.28 4 340 63 324.67 314.96 1 160 63 324.67 314.96 2 220 63 324.67 314.96 4 340 84 431.35 421.64 1 160 84 431.35 421.64 2 220 84 431.35 421.64 4 340 Torx pan head screw M4 × 6, St, zinc-plated, PU 100 pieces Square nuts M4, St, zinc-plated, PU 100 pieces

Order no. 34562-745 34562-749 34562-757 34562-746 34562-750 34562-758 34562-747 34562-751 34562-759 34562-748 34562-752 34562-760 24560-151 24560-140

Note 쮿 Square nuts required for assembly on the side panel 쮿 280 mm deep version available on request 쮿 Please order assembly strip, which is necessary for partial width, separately, see page 6.49 BPA45876

For further information www.schroff.biz/oneclick oneClick code = Order no.

06103057

Depth D = board height - 47.5 mm

6.48

UK 04/2006

Electronics Packaging

www.schroff.biz

Buch für druck 060413.book Seite 49 Donnerstag, 13. April 2006 5:47 17

Subracks – D Accessories Mounting strips for chassis plate 쮿 For assembly of chassis plates in partial widths 쮿 Suitable for assembly on all europacPRO horizontal rails

Delivery comprises Item 1

Qty 1

Description Assembly strip, St, zinc-plated, 2 mm

Order Information

BPA46557

Length Board height mm mm 142.4 160 202.4 220 322.4 340 Assembly parts Torx screw, M2.5 × 5, St, zinc-plated, PU 100 pieces

Order no. 30840-021 30840-033 30840-057 24560-146

Note 쮿 Four screws are required per assembly strip

Adapter bracket and unit / device slide rail 쮿 For assembly on 19" module support 쮿 For retainer of modules in accordance with DIN 43880 like e.g. fuse/circuit breaker

Delivery comprises (kit) Item 1 2 3 06105080

Qty 1 1 1

Description Adapter bracket kit, Al, 2 mm, anodised Slide rail, St profile, colour passivated Assembly kit

Order Information Application europacPRO

Order no. 24560-171

For further information www.schroff.biz/oneclick oneClick code = Order no.

06105079

BLA43460

Electronics Packaging

www.schroff.biz

UK 04/2006

6.49

Buch für druck 060413.book Seite 50 Donnerstag, 13. April 2006 5:47 17

Subracks – D Accessories Horizontal board installation 쮿 For horizontal installation of double euroboards in 3 or 4 U high subrack/case

Delivery comprises

BPA45914

Item 1 2

Qty 4 2

3a 3b 4a 4b 5a 5b 6

2 2 1 1 6 2 1

Description Support member, Zn die-cast Horizontal rail at front, type robust (H), with short lip (H-KD), long lip (H-LD) Horizontal rail at rear, type robust, (H-VT) Horizontal rail at rear, type robust, with Z (H-MZ) Centre horizontal rail at rear (VT) Centre horizontal rail at rear, with Z (MZ) Threaded inserts, St, zinc-plated Threaded inserts, St, zinc-plated (for version with Z) Set of assembly parts including assembly instructions

Order Information

06102073

1 TE = 1 HP, 1 HE = 1 U Other dimensions and options Installation at the front A

Horizontal rail type H-KD Horizontal rail front, short lip(H-KD) = flush to end of front panels

Height U 3 3 3 3 4 4

Useful Height h HP 20 20 20 20 28 28

Installation versions front A, rear C front B, rear C front A, rear D front B, rear D front A, rear C front B, rear C

Order no. 24564-117 24564-118 24564-127 24564-128 24564-217 24564-218

Note 쮿 Please order front frame for EMC shielding separately 쮿 Without cover space requirement is 53 HP

For further information www.schroff.biz/oneclick oneClick code = Order no. 06102059

Installation at the front B

Horizontal rail type H-LD Horizontal rail at the front, long lip (H-LD) = if you use IEEE handles on CompactPCI or VME64x systems 06102060

Installation at the rear C

Horizontal rail type H-VT Horizontal rail rear with +3 mm (H-VT) = for the direct backplane-mounting

06102061

Installation at the rear D

Horizontal rail type H-MZ Horizontal rail rear with Z (H-MZ) = for the mounting of connectors according to IEC 60603 (DIN 41612)

06102062

6.50

UK 04/2006

Electronics Packaging

www.schroff.biz

Buch für druck 060413.book Seite 51 Donnerstag, 13. April 2006 5:47 17

Subracks – D Accessories Front frame EMC shielded for horizontal board mounting 쮿 Front frame installation provides the contact between subracks and assemblies

Delivery comprises Item 1

Qty 2

2 3

2 2

Description Horizontal panel, Al, 2.5 mm, front anodised, rear chromated Vertical panel, Al profile, chromated Contact strips for horizontal rail/vertical panel, stainless steel

Order Information

BPA46559

3.9

Height H H1 h2 U mm mm mm 3 128.4 13.23 13.23 4 172.85 13.23 16.99 EMC contact strips 3 U, 97 mm, stainless steel, two pieces per front panel necessary, PU 10 pieces EMC contact strips 3 U, 97 mm, stainless steel, two pieces per front panel necessary, PU 100 pieces EMC contact strips 4 U, stainless steel, two pieces per front panel necessary, PU 10 pieces EMC contact strips 4 U, stainless steel, two pieces per front panel necessary, PU 100 pieces Assembly tool for EMC contact strip (front panel with slot), 1 piece

Order no. 24564-109 24564-209 21101-705 21101-706 21101-713 21101-714 24560-270

Note

BPA45913

쮿 Please order accessories separately 쮿 EMC contact strips stainless steel, see Front panels 쮿 Collar screws/sleeves for assembly on horizontal rails, see page 6.66 쮿 Perforated strips for centring, see page 6.34

1 TE = 1 HP, 1 HE = 1 U

Front frame unshielded for horizontal board mounting Accessories D

쮿 For horizontally assembled plug-in unit

Delivery comprises Item 1

Qty 1

Description Front frame with cut-out, Al, 2.5 mm, clear anodised

Order Information Height H U 3 4

H mm 128.4 168.8

Useful height h HP 20 28

Height h mm 102 142.6

Order no. 30835-162 30838-949

For further information www.schroff.biz/oneclick oneClick code = Order no. bza43061

Electronics Packaging

www.schroff.biz

UK 04/2006

6.51

Buch für druck 060413.book Seite 52 Donnerstag, 13. April 2006 5:47 17

Subracks – D Accessories Combined mounting 3 U and 6 U 쮿 Division of the 6 U mounting space into the following areas: – 2×3U – 1×6U 쮿 Suitable for installation of euroboards (100 mm high) and double euroboards (233.4 mm high)

Delivery comprises (kit)

BPA46549

Item 1 2 3 4 5 6 7

Qty 2 2 2 2 1 1 1

Description Horizontal rail at the front (H-KD), Al profile,anodised Horizontal rail at the rear (AB), Al profile, anodised Threaded insert, St, zinc-plated Support member, Zn die-cast Assembly kit incl. user manual Panel 2 HP, 6 U, shielded Assembly kit for front panel

Order Information Width pitch T1:T2 HP 20:62 40:42 42:40 63:19

Order no. 24562-420 24562-440 24562-442 24562-463

Note BZA42182

1 TE = 1 HP, 1 HE = 1 U

쮿 Please order separately: – EMC gasketing kit for horizontal rail – perforated strip

Combined mounting in individual parts The following parts should be ordered: 쮿 Horizontal rails 쮿 Threaded inserts 쮿 Perforated strips 쮿 Support member 쮿 6 U/2 HP front panel 쮿 EMC gasketing (horizontal rail/horizontal rail)

6.52

UK 04/2006

Electronics Packaging

www.schroff.biz

Buch für druck 060413.book Seite 53 Donnerstag, 13. April 2006 5:47 17

Subracks – D Accessories Horizontal rail Accessories D

Order Information Front Type L-OD light Type L-KD light Type H-KD robust without lip short lip short lip

06197006

For assembly at front top or bottom, with HP print 쏜 28 HP, Al extrusion, finish anodised, contact surface conductive Usable length HP

Length mm

06197007

06197008

Rear Type AB

Type H-LD robust

06197009

For assembly behind front panel

Standard horizontal front rail

For high mechanical demands

CompactPCI-, VME64x system

For CompactPCI rear I/O and 3 / 6 U assembly

SPQ 1) 10 pieces

20 106.68 34560-020 34560-120 34560-220 34560-320 28 147.32 34560-028 34560-128 34560-228 34560-328 40 147.32 34560-040 34560-140 34560-240 34560-340 42 218.44 34560-042 34560-142 34560-242 34560-342 63 325.12 34560-063 34560-163 34560-263 34560-363 84 431.8 34560-084 34560-184 34560-284 34560-384 – 1000 34560-001 34560-101 34560-201 34560-301 Screw, M4 x 14, PU 100 pieces 24560-130 24560-130 24560-130 24560-130 Screw, M4 x 10, necessary if guide rail is screwed on slot 1, PU 100 pieces 24560-155 24560-155 1) Delivery may be in Standard Pack Quantity (SPQ). Please order the ’SPQ’ quantity or a multiple. Pricing is per individual item.

34561-520 34560-528 34561-540 34561-542 34561-563 34561-584 34561-501 24560-130

Threaded insert, perforated strip Order Information Threaded inserts M2.5 M3

Perforated strips item 1

5,0

06103056

Required for assembly of the front panel on the horizontal rail; use collar screw 12.3 mm, see page 6.67

BZA45853

For centring of shielded plug-in units, Al, 1mm, please order grub screw for fixing separately

Threaded Perforated inserts strips Usable length Length SPQ 1) SPQ 1) Length SPQ 1) 10 pieces 10 pieces 10 pieces HP mm mm 20 106.18 – 106.48 34561-320 30845-189 28 147.32 – 147.12 34561-328 30845-197 40 207.78 – 208.08 34561-340 30845-209 42 217.94 – 218.24 34561-342 30845-211 63 324.62 – 324.92 34561-363 30845-232 84 431.3 431.6 34561-384 34561-484 30845-253 Grub screw M2.5 x 8, PU 100 pieces – – 21100-276 Grub screw M2.5 x 9, PU 100 pieces – – 21101-359 Grub screw M3 x 8, PU 100 pieces – – 21100-646 1) Delivery may be in Standard Pack Quantity (SPQ). Please order the ’SPQ’ quantity or a multiple. Pricing is per individual item.

Electronics Packaging

www.schroff.biz

UK 04/2006

6.53

Buch für druck 060413.book Seite 54 Donnerstag, 13. April 2006 5:47 17

Subracks – D Accessories Support member 6 U 쮿 The support member is bolted into the grid holes of the horizontal rails. The support member can also be screwed on.

Delivery comprises Item 4

Qty 1

Description Support member 6 U, Zn die-cast

Order Information Description Support member 6 U Torx screw M4 × 14, zinc-plated, PU 100 pieces Torx screw 2.5 × 10, zinc-plated, PU 100 pieces

bpa46551

Order no. 64560-010 24560-145 24560-179

For further information www.schroff.biz/oneclick oneClick code = Order no.

bza45857

Front panels 6 U/2 HP Delivery comprises Item 6

Qty 1

Description Front panel, AI, 2.5 mm, front anodised, rear colour passivated

Order Information Description

BPA46550

Qty SPQ 1) Front panel 6 U 2 HP unshielded 5 pieces Front panel 6 U 2 HP for stainless steel SPQ 1) gasket 5 pieces Front panel, 6 U / 2 HP for textile gasket SPQ 1) (U profile) 5 pieces Collar screw with pozidrive M2.5, nickel-plated, PU 100 pieces Collar screw with pozidrive M2.5, black, zinc-plated, PU 100 pieces Plastic washer 2.7 x 5 x 1, PA 6, PU 100 pieces

Order no. 30847-472 30846-865 30849-140 21101-101 21101-102 21101-121

1) Delivery may be in Standard Pack Quantity: Please order 5 pieces of front panels or a multiple. Pricing is per individual item.

Note Please order the following parts separately: 쮿 EMC gasketing, see page 6.43 쮿 For shielded version, perforated strips are required 6.34

6.54

UK 04/2006

Electronics Packaging

www.schroff.biz

Buch für druck 060413.book Seite 55 Donnerstag, 13. April 2006 5:47 17

Subracks – D Accessories Contact strips, horizontal rails - horizontal rails Accessories D

쮿 For shielding of 2 horizontal rails seated directly above one another with vertical division of the assembly space

Delivery comprises (kit) Item 1 2

Qty 1 2

Description Cover strip, Al, 1 mm Contact strip, stainless steel

Order Information

BPA46548

Length HP 20 40 42 63 84

Order no. 24562-520 24562-540 24562-542 24562-563 24562-584

Delivery may be in Standard Pack Quantity: Please order 10 pieces or a multiple. Pricing is per individual item.

BZA45877

Electronics Packaging

www.schroff.biz

UK 04/2006

6.55

Buch fĂźr druck 060413.book Seite 56 Donnerstag, 13. April 2006 5:47 17

Subracks â&#x20AC;&#x201C; D Accessories Dimensions guide rail Standard

Stable version

bza45808

For Accessories

06105074

For strengthened accessories

bza45808

CompactPCI, VME64x

bza46552

4.4" (111.7 mm)

06105068

Dimensions table Board height L mm 160 220 280 340 400

06105069

Text

A mm 161.5 221.5 281.5 341.5 401.5

A1 mm 137.9 197.9 257.9 317.9 377.9

A2 mm 149.39 209.39 269.39 322.39 389.39

A3 mm 153 213 273 333 393

Dimensions A4 mm 139 199 259 319 379

W mm 135 195 255 315 375

C mm 120 180 240 300 360

D mm 150 210 270 330 390

A, A1, A2, A3, A4: Length of rail B: Pitch of the snap-fit C: Pitch of the guide rail mounting screw D: Horizontal rail mounting screws

6.56

UK 04/2006

Electronics Packaging

www.schroff.biz

6_11_europacPRO_e_.fm Seite 57 Donnerstag, 20. April 2006 2:39 14

Subracks â&#x20AC;&#x201C; D Accessories Guide rail accessories ESD Clip

ESD clip for alignment pin

04503050

Coding block

06103052

Coding peg

06103051

Board retainers

06103050

Board handle

04805050

Electronics Packaging

www.schroff.biz

04805051

UK 04/2006

6.57

Buch für druck 060413.book Seite 58 Donnerstag, 13. April 2006 5:47 17

Subracks – D Accessories Guide rail, one-piece 쮿 For printed board lengths: 70, 160, 220, 280, 340 mm 쮿 Material: up to 280 mm length PBT UL 94-V-0, > 280 mm length, end piece PBT UL 94-V-0, middle part Al extrusion; robust version, Al extrusion 쮿 Guide rails: – Can be snapped into horizontal rails made of Aluminium extrusions – Snap-in on metal which is 1.5 mm thick

Order Information For plug-in units and frame-type plug-in units For boards / printed boards without front panel "Standard" "Standard" "Accessories" "Strengthened with DIN accessories" connector mounting

06102001

Board height Groove width Colour mm mm mm 70 100 160 160 220 220 280 340 160 220

2 2 2 2 2 2 2 2 2.5 2.5

red red red grey red grey red/silver red/silver red red

PU 2) 10 pieces – –

SPQ 1) 50 pieces

06102002

–

SPQ 1) 10 pairs – –

24560-351

64560-001

64560-074

24560-373

–

24560-353

64560-002

64560-075

24560-374

– 24560-379 24560-380

– – –

– –

64560-096 64560-098

– – – – –

34579-230

PU 2) 10 pieces – –

– 24560-375 24560-376

– –

SPQ 1) 50 pieces – 64560-082 64560-005 64560-055 64560-006 64560-166

– – – –

SPQ 1) 50 pieces – – 64560-076

– 64560-078

– 64560-080

– – –

Accessories ESD clip, 50 pieces 24560-255 24560-255 24560-255 24560-255 24560-255 ESD clip, for alignment pin, 50 pieces – – – – – Retention screws, PU 100 pieces 24560-141 24560-141 24560-141 24560-141 24560-141 Board retainer, red, PU 10 pieces – – – 24560-377 24560-377 Board handle, red, PU 10 pieces – – – 24560-378 24560-378 Identification strips for board handle, red, – – – 60817-228 60817-228 PU 1 sheet = 438 pieces Coding block top, red, SPQ 50 pieces – – – 34579-232 34579-232 Coding block top, grey, SPQ 50 pieces – – – 34579-233 34579-233 Coding block at bottom, red, SPQ 50 pieces – – – 34579-234 34579-234 Coding block at bottom, grey, SPQ 50 pieces – – – 34579-235 34579-235 Coding peg, PU 100 pieces – – – 20817-501 20817-501 1) Delivery may be in Standard Pack Quantity (SPQ). Please order the ’SPQ’ quantity or a multiple. Pricing is per individual item. 2) Order no. comprises one Packaging Unit (PU); multiple items in one pack. Pricing per PU.

6.58

UK 04/2006

Electronics Packaging

24560-255

– 24560-141 24560-377 24560-378 60817-228 34579-232 34579-233 34579-234 34579-235 20817-501

www.schroff.biz

Buch für druck 060413.book Seite 59 Donnerstag, 13. April 2006 5:47 17

Subracks – D Accessories Guide rail, one-piece

Order Information For CompactPCI, VME64x with keying/coding Standard Offset 0,1" for power supply units in accordance with IEEE 1101.10

06102003

Board height mm 70 70 160 160 160 220 220 220 280 340 400 160 160 220 220 280 280 340 340 400

Groove width mm 2 2 2 2 2 2 2 2 2 2 2 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5

Colour mm red grey red grey green red grey green red/silver red/silver silver red grey red/silver grey/silver red/silver grey/silver red/silver grey/silver silver

06102003

PU 2) 10 pieces

SPQ 1) 50 pieces

PU 2) 10 pieces

SPQ 1) 50 pieces

24560-355 24560-360 24560-356 24560-358

64560-085 64560-086 64560-089 64560-090

– – – –

– – – – – – – – –

–

24561-330 24561-340 24561-331 24561-341 24561-332 24561-342

–

64560-091 64560-092

– – – – – – – – – – – – –

For 4.4" board / printed board

24560-359 64560-071

– – – – – – – – – – – – – – –

– – 64560-072

– – – – – – – – – – – –

For large modules, Al extrusion, "Robust version" (silver)

06104009

SPQ 1) 50 pieces – – 64560-143

– – 64560-144

06102005

SPQ 1) 10 pieces – – – 34562-881

– –

– – – – –

34562-882

64560-145 34564-881 64560-146

– –

– 34562-883 34562-884 34562-885

34564-882

34564-883

–

34564-884 34564-885

Accessories ESD clip, 50 pieces – – – 24560-255 24560-255 – ESD clip, for alignment pin, 50 pieces 24560-256 24560-256 24560-256 24560-256 Retention screws, PU 100 pieces 24560-141 24560-141 24560-141 24560-141 24560-158 Coding peg, PU 100 pieces – 20817-501 20817-501 20817-501 20817-501 1) Delivery may be in Standard Pack Quantity (SPQ). Please order the ’SPQ’ quantity or a multiple. Pricing is per individual item. 2) Order no. comprises one Packaging Unit (PU); multiple items in one pack. Pricing per PU.

Electronics Packaging

www.schroff.biz

– – 24560-157

–

UK 04/2006

6.59

Buch für druck 060413.book Seite 60 Donnerstag, 13. April 2006 5:47 17

Subracks – D Accessories Guide rail, multi-piece 쮿 For board lengths: 160, 220, 280 mm or any other dimensions 쮿 Material: – End piece PBT UL 94-V-0 – Middle part Al extrusion

Order Information For plug-in units and frame-type 5 plug-in units "Standard"

For plug-in units and frame-type 5 plug-in units "Accessories"

06102001

Description

End piece, red Al extrusion, for board depth 160 mm Al extrusion, for board depth 220 mm Al extrusion, for board depth 280 mm Al extrusion, for any board depth End piece, red End piece, grey Al extrusion, for board depth 160 mm Al extrusion, for board depth 220 mm Al extrusion, for board depth 280 mm Al extrusion, for any board depth

Length Groove width mm mm

SPQ 10 pieces

For CompactPCI, VME64x with coding in accordance with IEEE 1101.10

06102002

64560-004

SPQ 50 pieces –

SPQ 10 pieces 64560-008

SPQ 50 pieces –

–

34560-891

–

155

–

34560-892

215

–

1000

34560-900

For 4.4" board / printed board

06102003

SPQ 10 pieces

SPQ 50 pieces

06104009

SPQ 10 pieces

–

64560-057

SPQ 50 pieces –

34560-891

–

34560-891

–

34560-892

–

34560-892

34560-893

–

34560-893

–

34560-893

–

34560-900

–

34560-900

–

64560-157

–

– –

2.5 2.5

– –

64560-093 64560-094

2.5

–

34562-813

–

34562-813

155

2.5

–

34562-814

–

34562-814

215

2.5

–

34562-815

–

34562-815

1000

2.5

–

34562-822

–

34562-822

–

Accessories ESD clip, 50 pieces – 24560-255 24560-255 24560-255 ESD clip, for alignment pin, 50 pieces – – – 24560-256 Retention screws, PU 100 pieces 24560-141 24560-141 24560-141 24560-158 Board assembly, red, PU 10 pieces – – – 24560-377 – – Board handle, red, PU 10 pieces – 24560-378 Identification strips for board handle, red, – – – 60817-228 PU 1 sheet = 438 pieces – – Coding block top, red, SPQ 50 pieces – 34579-232 Coding block top, grey, SPQ 50 pieces – – – 34579-233 Coding block at bottom, red, – – – 34579-234 SPQ 50 pieces Coding block at bottom, grey, – – – 34579-235 SPQ 50 pieces – Coding peg, PU 100 pieces – 20817-501 20817-501 1) Delivery may be in Standard Pack Quantity (SPQ). Please order the ’SPQ’ quantity or a multiple. Pricing is per individual item. 2) Order no. comprises one Packaging Unit (PU); multiple items in one pack. Pricing per PU.

6.60

UK 04/2006

Electronics Packaging

www.schroff.biz

Buch für druck 060413.book Seite 61 Donnerstag, 13. April 2006 5:47 17

Subracks – D Accessories Board retention Accessories D

쮿 The retaining rail enables retention of printed circuit boards and holds labels 쮿 Only for 84 HP europacPRO subracks 쮿 Installation possible on front and rear horizontal rail

Delivery comprises Item 1 2 3 4 5 6 7

5 6

Qty 1 1 1 2 2 2 1

Description Central rail, Al, anodised ID label, white Transparent cover strip, plastic Knurled screw Slide nut Hexagon nut M2.5 Rubber seal

Order Information

Description Central locking

Order no. 24560-167

2 3 4

For further information www.schroff.biz/oneclick oneClick code = Order no. 06101505

Reinforcement rail for europacPRO Accessories D

쮿 Enhances the shock and vibration stability 쮿 The strengthening profile has to be screw fixed on the square cut-outs of the side panel 쮿 Application also as slide rail with strengthening profile

Delivery comprises (kit) Item 1 2 3

Qty 2 2 1

Description Reinforcement rail, Al Threaded insert, M4 Assembly kit

Order Information 06101006

For subrack depth mm 175 235 295 355 415 475

Order no. 24562-453 24562-454 24562-455 24562-456 24562-457 24562-458

For further information www.schroff.biz/oneclick oneClick code = Order no.

Electronics Packaging

www.schroff.biz

UK 04/2006

6.61

Buch für druck 060413.book Seite 62 Donnerstag, 13. April 2006 5:47 17

Subracks – D Accessories Subrack assembly in the cabinet without U loss The following components are required if a europacPRO subrack without slide rails is to be assembled in a cabinet: 쮿 Reinforcement rail for europacPRO 쮿 C-rail as slide rail for cabinet mounting

C-rail as slide rail for cabinet mounting Accessories D

With the aid of the C profiles europacPRO subracks with assembled strengthening profiles can be pushed easily into Schroff cabinets 쮿 25 kg load-carrying capacity per pair 쮿 No U loss during assembly of several europacPRO modules arranged one above the other 쮿 Application from a side panel height of 3 U

Delivery comprises (kit) Item 1 2 06101006

Qty 2 1

Description C-rail, Al Assembly kit

Order Information Description VARISTAR VARISTAR Eurorack/PROLINE Eurorack/PROLINE Eurorack/PROLINE Minirack Minirack Minirack Lab rack

Depth mm 600 800 600 800 900 500 600 780 250

Order no. 24562-464 24562-466 24562-449 24562-451 24562-452 24562-460 24562-461 24562-462 24562-446

Note 쮿 The reinforcement rail and C-rails have been tested in accordance with the regulations of the Russian atomic energy authority GAN

For further information www.schroff.biz/oneclick oneClick code = Order no.

6.62

UK 04/2006

Electronics Packaging

www.schroff.biz

Buch für druck 060413.book Seite 63 Donnerstag, 13. April 2006 5:47 17

Subracks – D Accessories Air flow barrier for slots Accessories D

The air flow barrier for slots prevents an air short-circuit on unused slots. The L-shaped cover is pushed into the groove of the guide rail and secured via the keying/coding block

Delivery comprises ((kit)) Item 1

Qty 1

Description Air flow barrier, Al plate, 1 mm

Order Information

06101507

Width HP 4 4 4 4 8 8 8 8 12 12 12 12

Height U 3 3 6 6 3 3 6 6 3 3 6 6

Depth mm 160 220 160 220 160 220 160 220 160 220 160 220

Order no. 34562-823 34562-824 34562-826 34562-827 34562-833 34562-834 34562-836 34562-837 34562-843 34562-844 34562-846 34562-847

Note H

쮿 280 mm deep cover plates available on request

For further information www.schroff.biz/oneclick oneClick code = Order no. 14

.5 B 06101506

Electronics Packaging

www.schroff.biz

UK 04/2006

6.63

Buch für druck 060413.book Seite 64 Donnerstag, 13. April 2006 5:47 17

Subracks – D Accessories Slot filler panel with front panel for slot position Accessories D

Delivery comprises Item 1 2 3

Qty 1 2 1

Description Air flow barrier Front panel Assembly kit

Order Information

06101507

Width

Height

Depth

HP 4 4 8 8 12 12 4 4 8 8 12 12

U 3 3 3 3 3 3 6 6 6 6 6 6

mm 160 220 160 220 160 220 160 220 160 220 160 220

Front panel profile (Stainless steel gasket) Order no.

U-front panel (textile gasket)

20848-712 20848-720 20848-714 20848-722 20848-716 20848-724 20848-713 20848-721 20848-715 20848-723 20848-717 20848-725

20848-728 20848-736 20848-730 20848-738 20848-732 20848-740 20848-729 20848-737 20848-731 20848-739 20848-733 20848-741

Order no.

Note

쮿 280 mm deep small slot filler panel available on request 쮿 Please order stainless steel gasket and textile gasket separately

For further information www.schroff.biz/oneclick H

oneClick code = Order no.

3 2b

.5 B

3 2a / 2b 06105057

6.64

UK 04/2006

Electronics Packaging

www.schroff.biz

Buch für druck 060413.book Seite 65 Donnerstag, 13. April 2006 5:47 17

Subracks – D Accessories Edge protection Accessories D

The edge protection serves to cover cut-outs in the subrack side panel, for example. Damage to cables, etc. is thus prevented. Edge protection is suitable for panel thicknesses of 2.0 to 2.5 mm and is pushed into holes and held in place by means of engaging catches. 쮿 Options for use: – straight version = 2 possible fitting variants – curved version = 6 possible fitting variants

Order Information Description Edge protection curved, ABS, UL 94 V-0, RAL 7035

Qty / PU 10

Order no. 24560-170

06102070

For further information www.schroff.biz/oneclick oneClick code = Order no.

06102071

Electronics Packaging

www.schroff.biz

UK 04/2006

6.65

Buch für druck 060413.book Seite 66 Donnerstag, 13. April 2006 5:47 17

Subracks – D Accessories Assembly parts 쮿 Quick-release fastener 쮿 Sleeve 쮿 Screws 쮿 Cage nuts 쮿 Tools

Quick-release fastener Accessories D

쮿 Vibration and shockproof 쮿 1/4 rotary lock with defined stop 쮿 Detection of fastening position with slot position

Delivery comprises Qty 1 1

Description Locking pin, St, locking, Zn die-cast Press-in sleeve, POM

Order Information 06702062

Item 1 1 2 2

Description With slotted head, grey With slotted head, black With knurled head, grey With knurled head, black

Qty / PU 100 100 100 100

Order no. 21101-847 21101-848 21101-849 21101-850

Note Quick-release fastener: mounting without threaded insert

Sleeve Assembly parts

Order Information Item 2 2 2 1 1 1 1 1 1

Description Plastic sleeve, PA, grey Plastic sleeve, PA, grey Plastic sleeve, PA, black Metal sleeve, brass, nickel-plated Metal sleeve, brass, nickel-plated Metal sleeve, brass, black Metal sleeve, brass, black Metal sleeve, stainless steel Metal sleeve, stainless steel

Qty / PU 50 100 100 10 100 10 100 10 100

Order no. 21100-463 21100-464 21100-591 21100-659 21100-660 21100-885 21100-886 21100-661 21100-662

Note 06702061

6.66

UK 04/2006

쮿 Metal sleeves have to be pressed into the front panels 쮿 Not for front panels 2 HP

Electronics Packaging

www.schroff.biz

Buch für druck 060413.book Seite 67 Donnerstag, 13. April 2006 5:47 17

Subracks – D Accessories Collar screw Accessories D

Order Information Description

Application

Material

Dimension

Qty / PU

Order no.

St, nickel-plated M2.5 × 12.3

100

21101-101

St, zinc-plated, black

M2.5 × 12.3

100

21101-102

St, nickel-plated M2.5 × 12.3

100

21101-782

St, zinc-plated, black

M2.5 × 12.3

100

21101-783

Ms, zinc-plated

M2.5 × 12.3

100

21101-749

21101-908

100

21101-909

Collar screw with For assembly of front panels if pozidrive/slot threaded strips are used

AZA46586

Collar screw with For assembly of front panels if Torx threaded strips are used

AZA45941

For assembly of front panels if threaded inserts are used Collar screw with knurled head For assembly of front panels if threaded inserts are used; also usable for europacPRO and ratiopacPRO horizontal rails with long lip

St, nickel-plated M2.5 × 12.3

AZA45929

Torx screw self-forming Assembly parts

Order Information Description

Application

Material

Dimension

Qty / PU

Order no.

Pan head screw with Torx

For Al guide rails, heavy duty

St, zinc-plated, M2.5 × 7.3 black

100

24560-157

Countersunk screw with Torx

For 4.4" board height, guide rail to horizontal rail, europacPRO, ratiopacPRO

St, zinc-plated M2.5 × 7.7

100

24560-158

Pan head screw with Torx

For plastic guide rail on horizontal rail. For support member 6 U backplane fastening, centre

St, zinc-plated M2.5 × 9.3

100

24560-141

Pan head screw with Torx, selflocking

For plastic guide rail at horizontal rail. For panel mounting bracket on horizontal rail

St, zinc-plated M2.5 × 9.3

100

21500-039

Pan head screw with Torx

For splitting extrusion 6 U, backplane assembly horizontal rail central

St, zinc-plated M2.5 × 10

100

24560-179

AZA45922

Electronics Packaging

www.schroff.biz

UK 04/2006

6.67

Buch für druck 060413.book Seite 68 Donnerstag, 13. April 2006 5:47 17

Subracks – D Accessories Countersunk screw Accessories D

Order Information Description

Application

Material

Dimension

For contact strip europacPRO, ratiopacPRO

St, zinc-plated M4 × 5

Qty / PU

Order no.

100

24560-139

100

24560-145

Torx screw For mixed board expansion, securing shortened St, zinc-plated M4 × 14 horizontal rail to support member, with GND/earthing AZA46585

Torx pan head screw Assembly parts

Order Information Description

Application

Material

For Z-rails and connector mounting

St, nickel-plated M2.5 × 7

100

24560-147

For perforated rails

St, nickel-plated M2.5 × 10

100

24560-148

St, nickel-plated M2.5 × 12

100

24560-161

St, nickel-plated M2.5 × 14

100

24560-162

St, nickel-plated M2.5 × 16

100

24560-163

For backplane mounting at europac integral

St, zinc-plated

M2.5 × 10

100

21101-963

For backplane assembly

St, nickel-plated M2.5 × 12

100

21100-777

For screwing on support bracket, rear hood, rear angle to side panel, extension bracket and adapter bracket

St, zinc-plated

M4 × 6

100

24560-135

To screw on cover or chassis plate, with GND / earthing

St, zinc-plated

M4 × 6

100

24560-151

To screw on cover or chassis plate, with earthing function

St, zinc-plated

M4 × 6

100

21101-884

For horizontal rail to side panel if guide rail bolted onto slot position 1

St, zinc-plated

M4 × 10

100

24560-155

For horizontal rail on side panel, with earthing function

St, zinc-plated

M4 × 10

24560-131

For horizontal rail on side panel, with earthing function

St, zinc-plated

M4 × 14

100

24560-130

Pan head screw with Torx

For backplane assembly

Dimension

Qty / PU

Order no.

AZA45940

Screw + securing washer 06702051

Torx pan head screw

aza45940

6.68

UK 04/2006

Electronics Packaging

www.schroff.biz

Buch für druck 060413.book Seite 69 Donnerstag, 13. April 2006 5:47 17

Subracks – D Accessories Grub screw Accessories D

Order Information Description

Grub screw

Application

Material

Dimension

Qty / PU

Order no.

For threaded inserts M2.5 and perforated strips

Stainless steel

M2.5 × 9

100

21101-359

For threaded insert M2.5

St, nickel-plated M2.5 × 8

100

21100-276

For threaded inserts M3

St, zinc-plated

M3.0 × 8

100

21100-646

Dimension

Qty / PU

BZA45853

Square nuts Order Information Description

Application

Material

Square nut

For mounting of: components on side panels, contact strips, chassis plates

St, zinc-plated M4

100

Order no.

24560-140

AZA45921

Assembly kit 쮿 Subracks in cabinets or 19" cases 쮿 Case with 19" angles in cabinets

Delivery comprises (kit) Item 1 2 3

Qty 1 1 1

Description Screw M6 × 16, Pozidrive, zinc-plated Plastic washer, ABS, black Cage nut M6, zinc-plated

SC128XXX

Order Information Description PU = per 8 × (screw, washer, nut) PU = per 50 × (screw, washer, nut) PU = per 100 × (screw, washer, nut)

Order no. 21100-435 21101-809 21101-810

쮿 For 19" brackets with a thickness of 1.5 mm, see assembly kit at chapter Cabinets - Accessories

Electronics Packaging

www.schroff.biz

UK 04/2006

6.69

Buch für druck 060413.book Seite 70 Donnerstag, 13. April 2006 5:47 17

Subracks – D Accessories Slide nuts 쮿 The slide nut is pushed into the groove of the threaded insert at the front/rear (type VT)

Delivery comprises (kit) Item 1 2

Qty 1 2

Description Slide, PBT, red, UL 94 V-0, PBT Nut M 2.5, St, zinc-plated

Order Information Description Slide nut kit 1 Slide nut kit 2

Order no. 100 slides / 200 nuts 12 slides / 24 nuts

24560-165 24560-166

Note 쮿 Nuts used in item 3: Application for – hinged front panels 84 HP – full-width front panels or full-width rear panels 84 HP 쮿 Nuts used in item 4: Application for – hinged front panels 쮿 Nuts used in items 3 and 4: Application for – two front panels

For further information www.schroff.biz/oneclick oneClick code = Order no. 06702060

6.70

UK 04/2006

Electronics Packaging

www.schroff.biz

Buch für druck 060413.book Seite 71 Donnerstag, 13. April 2006 5:47 17

Subracks – D Accessories Assembly tool Order Information Description

Application

Dimension

Qty / PU

Order no.

–

T8 × 60

64560-026

–

T20 × 100

64560-027

Torx screwdriver

AZA45925

Assembly tools

Exclusively for installation of EMC contact strips on horizontal rail – cover plates

24560-271

Assembly tools

For front panels with slot, for assembly of EMC contact strips

24560-270

aza45938

–

aza45937

Electronics Packaging

www.schroff.biz

UK 04/2006

6.71

Buch für druck 060323.book Seite 72 Donnerstag, 23. März 2006 1:52 13

integral C

Overview ........... 0

Subrack – C integral

Cabinets ............ 1

Wall mounted cases ............... 2

Accessories for cabinets and wall mounted cases .... 3

Climate control .... 4

Desk-top cases .... 5

06502002

Subracks/ 19" chassis ......... 6

06500004

Front panels, plug-in units ....... 7

Integrated horizontal rail

06500002

Clip-in guide rail

06501002

EMC rear hood easy assembly

Systems ............ 8

Power supply units ................ 9

Backplanes ....... 10

Standards

Application

쮿 Internal and external dimensions in accordance with IEC 60297-3-101 / IEEE 1101.1 IEC 60297-3-102 / IEEE 1101.10/11 IEC 60297-3-103

쮿 Inexpensive, stable subrack system for large quantities of more than 500 pieces. Easy assembly through reduction of amount of parts.

쮿 Type of protection IP 20 in accordance with IEC 60529

쮿 Plug-in units and printed boards are usable without restriction.

Connectors, front panel component system ............ 11

Appendix ......... 12

6.72

UK 04/2006

Further important information can be found on the internet under www.schroff.biz Electronics Packaging

www.schroff.biz

Buch für druck 060323.book Seite 73 Donnerstag, 23. März 2006 1:52 13

Subrack – C integral

Overview ....... 6.72

integral C

The good value 19" subrack 쮿 The good value alternative for high numbers (> 500 pieces) 쮿 EMC shielding retrofittable 쮿 High stability and easy assembly 쮿 Guide rails can be clipped in or bolt-on

europac integral

europac integral.......... 6.74 europac integral complete kit ........ 6.74 EMC rear hood ..... 6.74 EMC spring. . . . . . 6.75 Insulating foil . . . . 6.75 Further components ........ 6.75

06501001

Further accessories see chapter europacPRO accessories

Electronics Packaging

www.schroff.biz

UK 04/2006

6.73

Buch für druck 060323.book Seite 74 Donnerstag, 23. März 2006 1:52 13

Subrack – C integral europac integral complete kit integral C

쮿 europac integral is the good value subrack version 쮿 All europacPRO accessories are usable

Delivery comprises (kit) Item

06501001

1 2 3

Qty 3U 2 1 1

6U 2 1 1

Description

4 5 6 7 8

2 – 1 2 1

2 1 1 2 1

Side panel, St, pre-zincplated (AlZn), 1.5 mm Cover plate at top, St, pre-zincplated (AlZn), 1.5 mm Cover plate at bottom, St, pre-zincplated (AlZn), 1.5 mm Threaded insert Horizontal rail centre, assembled at the reat Assembly kit, assembly instructions Perforated strip EMC textile gasket

Order Information Height Width B Depth U HP mm 3 84 175 6 84 175 Screw + screw retention washer for assembly of the backplane M2.5x10, pentaform, zinc-plated, Torx 8, 100 pieces

Order no. 24562-431 24562-432 21101-963

For further information www.schroff.biz/oneclick oneClick code = Order no.

06502001

Screw with screw retention washer

06702051

EMC rear hood integral C

쮿 For the shielding of the subrack at the rear

Order Information Height U 3 6

Width B HP 84 84

Depth mm 60 60

Material AlZn AlZn

Order no. 34562-547 34562-557

For further information www.schroff.biz/oneclick oneClick code = Order no.

06501002

6.74

UK 04/2006

Electronics Packaging

www.schroff.biz

Buch für druck 060323.book Seite 75 Donnerstag, 23. März 2006 1:52 13

Subrack – C integral EMC spring integral C

쮿 Connection of subrack and rear hood

Order Information Material Stainless steel

Length mm 406.3

Qty / PU

Order no. 24562-519

For further information www.schroff.biz/oneclick oneClick code = Order no.

BZA46757

Insulating foil integral C

쮿 The insulating foil (self-adhesive) is necessary for the insulated assembly of a backplane into the europac integral subrack

Order Information Description PU: sheet with 6 strips

Length mm 430

Width mm 72

Height mm 12

Order no. 64560-130

For further information www.schroff.biz/oneclick oneClick code = Order no.

06103055

Further components Further components: 쮿 Guide rails 쮿 ESD clips 쮿 Front panels 쮿 ...... see chapter europacPRO accessories

Electronics Packaging

www.schroff.biz

UK 04/2006

6.75

Buch für druck 060405.book Seite 76 Mittwoch, 5. April 2006 4:19 16

Overview ........... 0

19" chassis – O

Cabinets ............ 1

Wall mounted cases ............... 2

Accessories for cabinets and wall mounted cases .... 3

Climate control .... 4

Desk-top cases .... 5

Subracks/ 19" chassis ......... 6

Front panels, plug-in units ....... 7

0600200306002001

Standards/certifications

Modifications

쮿 External dimensions in accordance with IEC 602973

쮿 Special colours

쮿 Type of protection IP 20 in accordance with IEC 60529

쮿 Special depths and widths

쮿 EMC test in accordance with VG 95373 part

쮿 Front Panel Express: customised cut-outs in front panels, rear panels, cover and base plates

Note

쮿 Base plate with integrated rear panel

쮿 Where finish is identified as being chromated this provides a conductive surface to maintain high levels of EMC shielding effectiveness

쮿 Customised assembly service

Systems ............ 8 Modification examples

Power supply units ................ 9

Backplanes ....... 10 06002006

Different cut-outs

Connectors, front panel component system ............ 11

Appendix ......... 12

6.76

UK 04/2006

06002007

Combined 3 U and 6 U assembly

06002005

2 U version with 2 x 3 U assembly

For further application examples, see multipac on the Internet

Further important information can be found on the internet under www.schroff.biz Electronics Packaging

www.schroff.biz

Buch für druck 060405.book Seite 77 Mittwoch, 5. April 2006 4:19 16

19" chassis – O

Overview ....... 6.76

19" chassis for horizontal board assembly (standardised) and non-standardised components 쮿 EMC shielding can be retrofitted 쮿 Versions made of Aluminium or Steel (zinc-plated, AlZn coated) 쮿 Use of telescopic slides possible

19" complete chassis 쮿 1, 2 U 쮿 Al front panel, St chassis (AIZn coating)

19" complete chassis ......... 6.78

06002003

Configuration of 19" chassis

Text

19" chassis for non-standardised assembly 쮿 For the assembly of power supplies with chassis plate, boards... 쮿 1 ... 5 U

(Basic frame, chassis plate, covers, front handles, assembly kit for assembly of telescopic slides)

19" chassis for standardised assembly, IEC 60297

19" chassis for standardised 19" components .... 6.82

쮿 For the assembly of a connector (EN 60603) or isolated backplanes 쮿 1, 2 U 쮿 Al front panel, Al extrusion

06004002

Electronics Packaging

19" chassis for non-standardised components . . . . . 6.80

쮿 Al front panel, Al extrusion

06002004

Text

Configuration of 19" chassis ..... 6.79

www.schroff.biz

(Basic frame, base plate, internal configuration, front handles, assembly kit for assembly of telescopic slides) Guide rails . . . . . 6.84

UK 04/2006

6.77

Buch für druck 060404.book Seite 78 Dienstag, 4. April 2006 5:13 17

19" chassis – O 19" complete chassis O

쮿 Complete chassis, St (AIZn coated), with Al extrusion front panel 쮿 Detachable rear panel for easy assembly 쮿 19" and ATX power supplies can be assembled in the 1 U version up to a clearance of 40 mm

Delivery comprises (kit)

06002003

Item 1

Qty 1

2 3 4 5

1 1 1 1

Description Front panel, Al extrusion, 2 mm, front anodised, rear etched (at 1 U), colourless chromated front and rear side of the front panel, from 2 U clear chromated Base body plain, St, 1mm, (AIZn coated) Rear panel, St, 1mm, (AIZn coated) Cover plain, St, 1mm, (AIZn coated) Assembly kit

Order Information Height Height H Depth T U mm mm 1 43.7 220 1 43.7 280 1 43.7 340 2 88.1 280 2 88.1 340 Front handles For 1 U, Al extrusion, anodised, PU 2 pieces Front handles For 2 U, Al extrusion, anodised, PU 2 pieces

Order no. 20860-120 20860-121 20860-122 20860-126 20860-127 20860-256 20860-257

Note 쮿 Further dimensions available on request 쮿 Use of telescopic slides not possible 쮿 No EMC version available 쮿 Internal configuration kits cannot be used

For further information www.schroff.biz/oneclick 06002051

h = clearance (height H - 30), w = clearance width = 447 mm

6.78

UK 04/2006

oneClick code = Order no.

Electronics Packaging

www.schroff.biz

Buch für druck 060404.book Seite 79 Dienstag, 4. April 2006 5:13 17

19" chassis – O Configuration of 19" chassis O

쮿 Choose height and depth of the basic kit 쮿 Choose further components 쮿 For non-standardised versions (1 ... 5 U) – Chassis plate – Cover – Front handles – EMC gasket – Telescopic slides

06002001

Example for standardised configuration

쮿 For standardised versions (1, 2 U) in accordance with IEC 60297 – Support cover for horizontal board assembly – Internal configuration for connector or backplane assembly – Front handles – EMC gasket – Telescopic slides

Delivery comprises (basic kit) Item 1 2 3

Qty 2 (4) 1 1

4 5

1 1

Description Al extrusion (2 pieces from 5 U) Rear panel, Al, 2 mm, clear chromated Front panel, Al extrusion, 3 mm, front anodised, rear etched (at 1U), front and rear side of the front panel from clear chromated (at 2U) Assembly kit and user manual EMC gasket profile kit (only at 5 U)

Note

06002004

Basic kit 2

쮿 h = clearance height = H - 8.1 mm 쮿 b = clearance width = 403 mm 쮿 Non-standardised assembly (1 ... 5 U), see page 6.80 쮿 Standardised assembly (1, 2 U), see page 6.82

06002050

Dimensions basic kit

Electronics Packaging

www.schroff.biz

UK 04/2006

6.79

Buch für druck 060404.book Seite 80 Dienstag, 4. April 2006 5:13 17

19" chassis – O 19" chassis for non-standardised components 쮿 Select – Height and depth of the basic kit (1 ... 5 U) – Chassis plate – Cover plate – Front handles – EMC gasket – Telescopic slides

Order Information Basic frame

Chassis plate

Cover plate, plain

06002004

Frame, Al extrusion, front panel, Al, rear panel, Al, (5 U 2 pieces and with EMC shielding)

Height U 5 5 5 2 2 2 3 3 3 3 4 4 4 4 5

Height mm 43.7 43.7 43.7 88.1 88.1 88.1 132.6 132.6 132.6 132.6 177.0 177.0 177.0 177.0 221.5

Width W HP 84 84 84 84 84 84 84 84 84 84 84 84 84 84 84

Depth D mm 220 280 340 220 280 340 280 340 400 460 280 340 400 460 460

06002058

For heavy components, Al, 2 mm

perforated

06002053

Pushed into basic frame, Al, 1 mm, clear chromated, hole diameter 4 mm, degree of perforation 58 %

Pushed into basic frame, Al, 1 mm, clear chromated, please order EMC gasket separately

1 piece

20860-201 20860-202 20860-203 20860-210 20860-211 20860-212 20860-219 20860-220 20860-221 20860-222 20860-228 20860-229 20860-230 20860-231 20860-240

20860-107 20860-108 20860-109 20860-107 20860-108 20860-109 20860-108 20860-109 20860-110 20860-111 20860-108 20860-109 20860-110 20860-111 20860-111

30860-501 30860-502 30860-503 30860-501 30860-502 30860-503 30860-502 30860-503 30860-504 30860-505 30860-502 30860-503 30860-504 30860-505 30860-505

30860-510 30860-511 30860-512 30860-510 30860-511 30860-512 30860-511 30860-512 30860-513 30860-514 30860-511 30860-512 30860-513 30860-514 30860-514

Note 쮿 Further dimensions available on request

6.80

UK 04/2006

Electronics Packaging

www.schroff.biz

Buch für druck 060404.book Seite 81 Dienstag, 4. April 2006 5:13 17

19" chassis – O 19" chassis for non-standardised components

Order Information Front handles

EMC gasket

06002052

Height U 5 5 5 2 2 2 3 3 3 3 4 4 4 4 5

Height mm 43.7 43.7 43.7 88.1 88.1 88.1 132.6 132.6 132.6 132.6 177.0 177.0 177.0 177.0 221.5

Width W HP 84 84 84 84 84 84 84 84 84 84 84 84 84 84 84

Depth D mm 220 280 340 220 280 340 280 340 400 460 280 340 400 460 460

Telescopic slides assembly kit

ESA44237

06094004

Al extrusion, anodised

To increase EMC shielding; delivery comprises, see page 6.85

For assembly of 19" chassis on telescopic slides, please order telescopic slides separately, see chapter cabinets - accessories

PU 2 pieces

PU 1 kit

20860-130

21101-622

20860-256

20860-257

20860-258

20860-259

20860-260

Note 쮿 Further dimensions available on request

Electronics Packaging

www.schroff.biz

UK 04/2006

6.81

Buch für druck 060404.book Seite 82 Dienstag, 4. April 2006 5:13 17

19" chassis – O 19" chassis for standardised 19" components 쮿 Select - Height and depth of the basic kit (1, 2 U) - Support cover for horizontal board assembly - Internal configuration for connector or backplane assembly - Front handles - EMC gasket - Telescopic slides

Order Information Basic frame

Support cover for horizontal board assembly

Internal configuration for connector EN 60603 for insulated backplane assembly

6 HE / 6 U

3 HE / 3 U

06002004

Frame, Al extrusion, front panel, Al, rear panel Al

Height U 1 1 1 2 2 2

Height mm 43.7 43.7 43.7 88.1 88.1 88.1

Width W HP 84 84 84 84 84 84

Depth D mm 220 280 340 220 280 340

06002053

Al, 1 mm, clear chromated

06003050

06003051

Horizontal rail for 3 and 6 U boards

Horizontal rails, threaded inserts, insulation strips for 3 and 6 U boards

1 piece

PU 1 kit

20860-201 20860-202 20860-203 20860-210 20860-211 20860-212

30860-519 30860-520 30860-521 30860-519 30860-520 30860-521

20860-115 20860-115 20860-115 20860-117 20860-117 20860-117

20860-116 20860-116 20860-116 20860-118 20860-118 20860-118

Note 쮿 Further dimensions available on request

6.82

UK 04/2006

Electronics Packaging

www.schroff.biz

Buch für druck 060404.book Seite 83 Dienstag, 4. April 2006 5:13 17

19" chassis – O 19" chassis for standardised 19" components

Order Information Front handles

EMC gasket

06002052

Al extrusion, anodised

Height U 1 1 1 2 2 2

Height mm 43.7 43.7 43.7 88.1 88.1 88.1

Width W HP 84 84 84 84 84 84

Depth D mm 220 280 340 220 280 340

PU 2 pieces

Assembly kit for telescopic slides

ESA44237

06094004

For mounting of 19" chassis To increase EMC shielding; on telescopic slides, delivery comprises, see page please order telescopic slides 6.85 separately, see chapter cabinet - accessories

PU 1 Kit

20860-130

21101-622

20860-256

20860-257

Note 쮿 Further dimensions available on request

Electronics Packaging

www.schroff.biz

UK 04/2006

6.83

Buch für druck 060404.book Seite 84 Dienstag, 4. April 2006 5:13 17

19" chassis – O Guide rails 쮿 For printed board lengths: 100, 160, 220, 280, 340 mm 쮿 Material: up to 280 mm length PBT UL 94-V-0, > 280 mm length, head piece PBT UL 94-V-0, middle part Al extrusion, strengthened version 쮿 Guide rails: – Can be plugged into horizontal rails made of Al extrusion – Can be plugged into metal which is 1.5 mm thick 쮿 Printed board retainer, printed board handle see Accessories

Order Information Guide rails "accessories"

"strengthened accessories"

BZA45829

Board length mm 100 160 160 220 220 280 280 340

Groove width mm 2 2 2 2 2 2 2 2

BZA46554

Colour red red grey red grey red/silver red red/silver

PU 2) 10 pieces – 24560-373

– 24560-374

– 24560-375

– 24560-376

SPQ 1) 50 pieces 64560-082 64560-005 64560-055 64560-006 64560-166

– – –

SPQ 1) 50 pieces – 64560-076

– 64560-078

– – 64560-080

–

Accessories Printed board retainer, red, PU 10 pieces 24560-377 Printed board handle, red, PU 10 pieces 24560-378 Identification strips for printed board handle, 60817-228 red, PU 1 sheet = 438 pieces ESD clip, PU 50 pieces 24560-255 Retention screw, PU 100 pieces 24560-141 1) Delivery may be in Standard Pack Quantity (SPQ). Please order the ’SPQ’ quantity or a multiple. Pricing is per individual item. 2) Order no. comprises one Packaging Unit (PU); multiple items in one pack. Pricing per PU.

6.84

UK 04/2006

Electronics Packaging

www.schroff.biz

Buch für druck 060404.book Seite 85 Dienstag, 4. April 2006 5:13 17

19" chassis – O EMC gasket kit O

쮿 A high EMC shielding is achieved with the EMC gasketing and cover plates

Delivery comprises (kit) Item 1

Qty 1

Description Seal 2100 mm; silicone / nickel, connection side panel / cover Saw tooth 400 mm; stainless steel; connection front panel / cover

Order Information Description EMC gasket kit ESA44237

1) with EMC shielding material 2) without EMC shielding material

Order no. 20860-130

Note 쮿 EMC test report on the Internet

For further information www.schroff.biz/oneclick oneClick code = Order no.

Electronics Packaging

www.schroff.biz

UK 04/2006

6.85

Buch für druck 060331.book Seite 86 Freitag, 31. März 2006 1:29 13

Overview ........... 0

19" chassis – F

Cabinets ............ 1

Wall mounted cases ............... 2

Accessories for cabinets and wall mounted cases .... 3

Climate control .... 4

Desk-top cases .... 5

02192001

Subracks/ 19" chassis ......... 6

Front panels, plug-in units ....... 7

Systems ............ 8

Power supply units ................ 9

Backplanes ....... 10

02192005

Stable 19" assembly, also applicable for board assembly

Standards

Modifications

쮿 Internal dimensions in accordance with IEC 60297-3

쮿 Special colours

쮿 Type of protection IP 20 in accordance with IEC 60529 쮿 Protective grounding connections in accordance with EN 50178 EN 60950 EN 61010-1 EN 61010-1A2

쮿 Special depths 쮿 Cut-outs in front and rear panels 쮿 Easy conversion from chassis to desk-top enclosure, rear frame also applicable at front (no 19" flanges) 쮿 Threaded holes in the front frame for assembly of special plug-in units 쮿 Printing on the front and rear panels 쮿 Assembly service according to customer specification

Connectors, front panel component system ............ 11

Appendix ......... 12

6.86

UK 04/2006

쮿 Assembly with horizontal rails in the 6 U case available on request

Further important information can be found on the internet under www.schroff.biz Electronics Packaging

www.schroff.biz

Buch für druck 060331.book Seite 87 Freitag, 31. März 2006 1:29 13

19" chassis – F

Overview ....... 6.86

19" chassis with high mechanical stability 쮿 Front and rear frame made of Al die-cast 쮿 Modular assembly for standardised board formats

Desk-top enclosure

19" chassis .... 6.88

02192002

19" cabinet assembly

Text

02192003

Accessories

Text

Accessories Front panel ........ 6.89 Hinged front panel 6.89 Rear panel.......... 6.90 Support rail ........ 6.90 Horizontal rail ..... 6.91 Front handle ....... 6.91 Earthing kit ........ 6.91 Dimensions ........ 6.92

02192004

Electronics Packaging

www.schroff.biz

UK 04/2006

6.87

Buch für druck 060331.book Seite 88 Freitag, 31. März 2006 1:29 13

19" chassis – F 19" chassis F

Delivery comprises (kit) Item 1

Qty 2

3 4

1 1

6 7

4 1

Description Side panel, Al extrusion, RAL 7030 6 U: 2 Al extrusions 1 divider plate (steel) Front frame, Al die-cast, RAL 7030, rear with centres for drilled holes for handle and front panel assembly Rear frame, Al die-cast, RAL 7030 Cover, St, 1mm, RAL 7035, plastic-coated with GND/earthing connection Base, St, 1mm, RAL 7035, plastic-coated with GND/earthing connection Case foot with anti-slip protection, PC UL 94 V-0 Assembly kit

ipa30632

Order Information

IPA30635

Height H U 2 2 2 3 3 3 3 4 4 4 4 6 6

Height H mm 88 88 88 132.5 132.5 132.5 132.5 177 177 177 177 265.9 265.9

Depth D

mm 86 86 86 130.5 130.5 130.5 130.5 174.5 174.5 174.5 174.5 263.5 263.5

mm 57.5 57.5 57.5 102 102 102 102 146.5 146.5 146.5 146.5 235.4 235.4

mm 76.2 76.2 76.2 57.15 57.15 57.15 57.15 101.6 101.6 101.6 101.6 190.5 190.5

mm 254.5 314.5 374.5 254.5 314.5 374.5 434.5 254.5 314.5 374.5 434.5 374.5 434.5

Order no.

10828-071 10828-072 10828-073 10828-051 10828-052 10828-053 10828-054 10828-056 10828-057 10828-058 10828-059 10828-068 10828-069

Note 쮿 Items 1, 2 and 3 assembled 쮿 Delivery comprises screws for assembly of the rear panel and front panel IPA30704

For further information www.schroff.biz/oneclick oneClick code = Order no.

IPA30706

6.88

UK 04/2006

Electronics Packaging

www.schroff.biz

Buch für druck 060331.book Seite 89 Freitag, 31. März 2006 1:29 13

19" chassis – F Front panel F

Delivery comprises Item 1

Qty 1

Description Front panel, Al, 2.5 mm, anodised, cut edges untreated

Order Information Height U 2 3 4 6

IPA42082

Height H mm 76 120.5 162 253.8

h mm 65.6 110 154.5 243.4

Order no. 30828-055 30828-058 30828-061 30828-067

Note 쮿 Delivery of the 19" chassis comprises assembly kit for the front panel

For further information www.schroff.biz/oneclick oneClick code = Order no.

Front panel, bottom-hinged F

Delivery comprises Item 1

Qty 1

Description Front panel, bottom-hinged, Al, 2.5 mm, anodised, cut edges untreated

Order Information

ipa42083

Height Height H U mm 2 76 3 120.5 4 165 6 253.8 Hinge kit PPE UL94-0

h1 mm 54.5 99 143.5 232.3

Order no. 30828-085 30828-088 30828-091 30828-097 20828-028

Note 쮿 Please order hinge kit separately

For further information www.schroff.biz/oneclick oneClick code = Order no.

Electronics Packaging

www.schroff.biz

UK 04/2006

6.89

Buch für druck 060331.book Seite 90 Freitag, 31. März 2006 1:29 13

19" chassis – F Rear panel F

Delivery comprises (kit) Item 1

Qty 1

Description Rear panel, including assembly kit, Al 2.5 mm, anodised, cut edges untreated

Order Information Height U 2 3 4 6

IPA42086

Height H mm 76 120.5 165 253.8

h mm 65.6 110 154.5 243.4

h2 mm – – – 30

Order no. 30828-070 30828-073 30828-076 30828-082

For further information www.schroff.biz/oneclick oneClick code = Order no.

Support rail F

쮿 Guide rails for printed boards 100 × 160 mm or 100 × 220 mm can be assembled

Order Information Item 1 2

IPA30639

Description Front support rail, St, 1.5 mm, zinc-plated, 1 piece Rear support rail, St, 1.5 mm, zinc-plated, 1 piece Guide rail 220 mm, PBT UL 94 V-0 with integrated 3 mounting for connector in accordance with EN 60603 (DIN 41612), PU 2 pieces Guide rail 160 mm, PBT UL 94 V-0 with integrated 3 mounting for connector in accordance with EN 60603 (DIN 41612), PU 2 pieces Screw For support rail assembly, M 4 × 8, flat head pozidrive, PU 100 pieces

Order no. 30828-165 30828-174 60817-079

60817-078 21100-677

For further information www.schroff.biz/oneclick oneClick code = Order no.

A3-308

6.90

UK 04/2006

Electronics Packaging

www.schroff.biz

Buch für druck 060331.book Seite 91 Freitag, 31. März 2006 1:29 13

19" chassis – F Horizontal rail F

쮿 For assembly with printed boards 쮿 Usable width 75 HP (1 HP = 5.08 mm)

Delivery comprises (components) Item 1 2 3

Qty 1 1 1

Description Horizontal rail, Al extrusion, anodised Z-rail, Al extrusion, anodised Threaded insert, St, zinc-plated (blue)

Order Information Item Description Qty 1 Horizontal rail 75 HP 1 2 Z-rail 75 HP, for DIN 41 612 1 3 Threaded insert 75 HP 1 Screw For horizontal rail assembly, M4 × 8, flat head Pozidrive, PU 100 pieces Cheesehead screw with slot M2.5 × 6, DIN 84, PU 100 pieces

IPA30640

Order no. 30828-128 30814-513 30819-604 21100-677 21100-146

a4-587xx

2) Adjusting nut M4

Front handle F

쮿 Load-carrying capacity 35 kg per pair

Delivery comprises (kit) Item 1

Qty 2

Description Front handle, Al die-cast, powder-coated, RAL 7030 , incl. assembly kit

Order Information Height U 3 4 6

IPA30636

Order no. 20828-127 20828-128 20828-129

Earthing kit F

쮿 The earthing kit ensures VDE compliant earthing of the cases in accordance with – EN 50178 – EN 60950 – EN 61010-1 – EN 61010-1A2 쮿 VDE inspection carried out

Order Information

AZA43284

Electronics Packaging

www.schroff.biz

Description Qty / PU Order no. Earthing kit, Cu wire, 1.5 mm2, PVC sheathing, green/yellow, connects side panels, top and base 1 21100-814 plate and rear panel

UK 04/2006

6.91

Buch für druck 060331.book Seite 92 Freitag, 31. März 2006 1:29 13

19" chassis – F Dimensions 19" front frame

A3-306

Section A-A There are counterbores at the rear of the front frame which can be drilled if necessary: For handle assembly 2) For front panel assembly (grid 5.08 mm) 1)

19" rear frame

A3-305

Section A-A

Text

Dimensions table Height in U 2 3 4 6

6.92

H 88.0 132.5 177.0 265.9

UK 04/2006

HR 86.0 130.5 175.0 263.9

h 57.5 102.5 146.5 235.4

h1 77.3 121.8 166.3 255.2

h2 69.8 114.3 158,8 247.7

h3 25.0 90.0 134.5 233.4

h4 76.2 57.1 101,6 190.4

h5 65.5 110.0 154.5 243.4

Electronics Packaging

h6 68.0 112.5 157.0 245.9

h7 68.4 112.8 157.3 245.9

www.schroff.biz

Buch für druck 060331.book Seite 93 Freitag, 31. März 2006 1:29 13

19" chassis – F Dimensions Side panel

A3-304a

Item "X"

A3-304b

Text

Dimensions table Height in U 2 2 2 3 3 3 4 4 4 6 6 6

H 82.6 82.6 82.6 127.0 127.0 127.0 171.0 171.0 171.0 260.4 260.4 260.4

h1 – – – 24.0 24.0 24.0 68.5 68.5 68.5 157.1 157.1 157.1

Electronics Packaging

h2 68.0 68.0 68.0 112.5 112.5 112.5 157.0 157.0 157.0 245.9 245.9 245.9

h3 71.4 71.4 71.4 115.8 115.8 115.8 160.3 160.3 160.3 248.9 248.9 248.9

www.schroff.biz

h4 59.0 59.0 59.0 103.5 103.5 103.5 148.0 148.0 148.0 236.5 236.5 236.5

L 220.5 280.5 340.5 220.5 280.5 340.5 220.5 280.5 340.5 220.5 280.5 340.5

l1 140.5 200.5 260.5 140.5 200.5 260.5 140.5 200.5 260.5 140.5 200.5 260.5

(n) 17.0 23.0 29.0 17.0 23.0 29.0 17.0 23.0 29.0 17.0 23.0 29.0

X 170 230 290 170 230 290 170 230 290 170 230 290

T 254.5 314.5 374.5 254.5 314.5 374.5 254.5 314.5 374.5 254.5 314.5 374.5

UK 04/2006

6.93