Buch für druck 060407.book Seite 62 Freitag, 7. April 2006 3:54 15
Frame type 4 & 5,
Overview ........... 0
Frame type plug-in units
Cabinets ............ 1
Wall mounted cases ............... 2
Accessories for cabinets and wall mounted cases .... 3
Climate control .... 4
Desk-top cases .... 5
04802002
Frame type plug-in units / HF plug-in units Subracks/ 19" chassis ......... 6
쮿 For printed boards in euroboard format 3 U: 100 × 160 mm and 100 × 220 mm respectively 6 U: 233.5 × 160 mm and 233.5 × 220 mm respectively 쮿 Available as kits or individual components 쮿 Front panels also with EMC shielding
Front panels, plug-in units ....... 7
Systems ............ 8
Power supply units ................ 9
Standards
Modifications
쮿 IEC 60297-3-101 / IEEE 1101.1/11
쮿 Special widths 쮿 Special depths
Note
Backplanes ....... 10
쮿 Where finish is identified as being chromated this provides a conductive surface to maintain high levels of EMC shielding effectiveness
쮿 Other finishes 쮿 Top and rear panels made of steel 쮿 Front and rear panel modifications 쮿 Mounting service
Connectors, front panel component system ............ 11
Appendix ......... 12
7.62
UK 04/2006
Further important information can be found on the internet under www.schroff.biz Electronics Packaging
www.schroff.biz
Buch für druck 060407.book Seite 63 Freitag, 7. April 2006 3:54 15
Frame type plug-in units
Overview ....... 7.62
Frame type 4 & 5,
Components 쮿 Plug-in units type 4 & 5 쮿 HF plug-in units 쮿 Mechanically shielded plug-in units
Plug-in units type 4 & 5
Plug-in units
쮿 Available in 3 U and 6 U version
3/6 U shielded/ unshielded . . . . . 7.64 Front panel . . . . . 7.66 Handles . . . . . . . 7.68 Extruded side panel 7.69 Side panel . . . . . 7.70 Cover plate . . . . . 7.71 Guide rails . . . . . 7.71 Rear panel . . . . . 7.72 Printed board assembly . . . . . . 7.74 Assembly instructions . . . . . 7.76
쮿 Suitable for all subracks and cases
04898001
Mechanically shielded plug-in units
Text
쮿 Protection of printed boards against mechanical damage
Shielded plug-in units 3 U . . . . . . . . . . . 7.77 6 U . . . . . . . . . . . 7.78
04792001
Text
HF plug-in units
HF plug-in units
쮿 Available in 3 U versions
Kit . . . . . . . . . . . 7.79 HF body tube . . . . 7.80 Front panel . . . . . 7.81 EMC stainless steel gasket . . . . . 7.82 Assembly tools . . 7.82 Rear panel . . . . . 7.82 Assembly kit . . . . 7.83
쮿 Suitable for all subracks and cases 쮿 HF plug-in units with shielding against high-frequency radiation 쮿 Front panels with EMC shielding
04892005
Drive units see chapter Systems - Accessories
Text
Electronics Packaging
www.schroff.biz
UK 04/2006
7.63
7_31_Kassetten_e.fm Seite 64 Mittwoch, 19. April 2006 10:08 10
Frame type plug-in units Plug-in unit kits 3/6 U, shielded Frame type 4 & 5,
쮿 Right and left extruded side panels with grooves for sliding in printed board (standard card position only on the left) 쮿 Assembly of further printed boards via assembly of guide rails in the perforated covers 쮿 Front panel EMC shielded, covers with perforation
Delivery comprises (kit) Item 1
Qty 1
Description Front panel, Al, 2.5 mm, front anodised, rear colourless chromated Handle, grey PPE, UL 04 V-1 Rear panel Al, 1.5 mm Extruded side panel Cover, perforated, Al 1 mm EMC gasket, stainless steel Assembly kit
2 3a/3b 4 5 6 7
1 1 2 2 2 1
Height
Width
U 3 3 3 3 3 3 3 3 3 3 3 3
HP 10 12 14 21 28 42 10 12 14 21 28 42
6
Order Information Rear panel
KAA46405
04802055
KAA46407
KAA46406
04802055
KAA46408
T = 167mm, front panel shielded Order no.
T = 227 mm front panel shielded Order no.
20846-636 20846-637 20846-638 20846-639 20846-640 20846-641 20846-660 20846-661 20846-662 20846-663 20846-664 20846-665
20846-642 20846-643 20846-644 20846-645 20846-646 20846-647 20846-666 20846-667 20846-668 20846-669 20846-670 20846-671
10
20846-648
20846-654
6
12
20846-649
20846-655
6
14
20846-650
20846-656
6
21
20846-651
20846-657
6
28
20846-652
20846-658
6
42
20846-653
20846-659
6
10
20846-672
20846-678
6
12
20846-673
20846-679
6
14
20846-674
20846-680
6
21
20846-675
20846-681
6
28
20846-676
20846-682
6
42
20846-677
20846-683
T = plug-in unit side panel depth 쮿 Guide rails for plug-in unit, see page 7.71 쮿 Printed board assembly, see page 7.74
7.64
UK 04/2006
Electronics Packaging
www.schroff.biz
7_31_Kassetten_e.fm Seite 65 Mittwoch, 19. April 2006 10:08 10
Frame type plug-in units Plug-in unit kits 3/6 U, unshielded 쮿 Right and left extruded side panels with grooves for sliding in a printed board (standard card position only on the left) 쮿 Assembly of further boards via assembly of guide rails in the perforated covers 쮿 Front panel EMC unshielded, cover with perforation
Delivery comprises (kit) Item 1
Qty 1
2 3a/3b 4 5 6
1 1 2 2 1
Description Front panel, Al, 2.5 mm, front anodised, rear colourless chromated Handle, grey, PPE, UL 04 V-1 Rear panel Al, 1.5 mm Extruded side panel Cover, perforated, Al, 1 mm Assembly kit
Order Information Rear panel
KAA46405
04802055
KAA46407
KAA46406
04802055
KAA46408
Height
Width
U 3 3 3 3 3 3 3 3 3 3 3 3
HP 10 12 14 21 28 42 10 12 14 21 28 42
6
T = 167 mm, front panel T = 227 mm, front panel unshielded unshielded Order no. Order no. 24811-478 24811-479 24811-480 24811-481 24811-482 24811-483 24811-490 24811-491 24811-492 24811-493 24811-494 24811-495
24811-484 24811-485 24811-486 24811-487 24811-488 24811-489 24811-496 24811-497 24811-498 24811-499 24811-500 24811-501
10
24811-502
24811-508
6
12
24811-503
24811-509
6
14
24811-504
24811-510
6
21
24811-505
24811-511
6
28
24811-506
24811-512
6
42
24811-507
24811-513
6
10
24811-514
24811-520
6
12
24811-515
24811-521
6
14
24811-516
24811-522
6
21
24811-517
24811-523
6
28
24811-518
24811-524
6
42
24811-519
24811-525
쮿 Guide rails for plug-in unit, see page 7.71 쮿 Printed board assembly, see page 7.74
For further information www.schroff.biz/oneclick oneClick code = Order no.
Electronics Packaging
www.schroff.biz
UK 04/2006
7.65
Buch für druck 060411.book Seite 66 Dienstag, 11. April 2006 5:36 17
Frame type plug-in units – Components Front panel for plug-in units type 4 and 5 Components
Delivery comprises Item 1
Qty 1
Description Front panel, Al, 2.5 mm, front anodised, rear colourless chromated
KAA46409
3 U/6 U unshielded A B
ø5.9 x 3.3
7.45
A
A C
208.5
7.45
255.8
B
A
A
261.8
A ø5.9 x 3.3
75
122.4 128.4
C
D
26.3 14.7
26.3 14.7
D
3
5.08
3
5.08 A-A
A-A ø2.5
ø2.5
04802066
3 U/6 U with slot for contact strips A B
ø5.9 x 3.3 A
7.45 A
C
255.8
7.45
208.5
B
261.8
A ø5.9 x 3.3
75
122.4 128.4
C
D
ø2.5
A-A
A-A Y
ø2.5
R11
Y
ø2.5 ø 2.5
5 1.8
2.5
10.7
X 0.65
1.8
1
Y
ø2.5
5.08
3
5.08
3
26.3 14.7
26.3 14.7
D
ø 2.5
04802067
Order Information Height
Width
A
B
C
D
Unshielded
U 3 3 3 3 3 3 6 6 6 6 6 6
HP 10 12 14 21 28 42 10 12 14 21 28 42
mm 50.46 60.62 70.76 106.34 141.9 213.02 50.46 60.62 70.78 106.34 141.9 213.02
mm 35.56 45.72 55.88 91.44 127 198.12 35.56 45.72 55.88 91.44 127 198.12
mm 40.4 50.56 60.72 96.28 131.84 202.96 40.4 50.56 60.72 96.28 131.84 202.96
mm 35.56 45.72 55.88 91.44 127 198.12 35.56 45.72 55.88 91.44 127 198.12
Order no.
With slots for EMC stainless steel gasket Order no.
30847-729 30847-730 30847-731 30847-732 30847-733 30847-734 30847-739 30847-740 30847-741 30847-742 30847-743 30847-744
20846-584 20846-585 20846-586 20846-587 20846-588 20846-589 20846-594 20846-595 20846-596 20846-597 20846-598 20846-599
Delivery may be in Standard Pack Quantity: Please order 10 pieces or a multiple. Pricing is per individual item.
7.66
UK 04/2006
Electronics Packaging
www.schroff.biz
Buch für druck 060411.book Seite 67 Dienstag, 11. April 2006 5:36 17
Frame type plug-in units – Components EMC stainless steel gasket 쮿 The EMC stainless steel gasket is pushed into the lateral slots of the shielded front panels
Order Information Item 9 9 9 9
Height U 3 3 6 6
Height mm 97 97 232 232
Material
Qty / PU
Stainless steel Stainless steel Stainless steel Stainless steel
10 100 10 100
Order no. 21101-705 21101-706 21101-707 21101-708
For further information www.schroff.biz/oneclick oneClick code = Order no. KAA46411
Assembly tool 쮿 For easier assembly of EMC stainless steel gasket
Order Information Description Assembly tool
Qty / PU 1
Order no. 24560-270
For further information www.schroff.biz/oneclick oneClick code = Order no. aza45937
Electronics Packaging
www.schroff.biz
UK 04/2006
7.67
Buch für druck 060411.book Seite 68 Dienstag, 11. April 2006 5:36 17
Frame type plug-in units – Components Static plastic handle 쮿 With separate identification plate 쮿 Handles laterally closed
Delivery comprises Item 11b 12
Qty 1 1
Description Static plastic handle, PPE UL 94 V-1, grey or black Identification plate, Al, 1.5 mm, anodised, cut edges untreated
Order Information
KAA46410
Width HP 10 12 14 21 28 42
Width mm 49.4 59.6 69.7 105.2 140.8 212
Grey Order no.
Black Order no.
20808-004 20808-064 20808-065 20808-066 20808-067 20808-068
20808-085 20808-086 20808-087 20808-088 20808-089 20808-091
Delivery may be in Standard Pack Quantity: Please order 10 pieces or a multiple. Pricing is per individual item.
A4-328e
Fixing clip for static plastic handle 쮿 Assembly aid for handles from 5 HP up to 42 HP
Order Information Item 23
Description Fixing clip, PPE, UL 94 V-0, black
Qty / PU 100
Order no. 21101-239
For further information www.schroff.biz/oneclick oneClick code = Order no.
04602059
Assembly parts for plastic handle Order Information Description Pozidrive c/sk screw, M2.5 Square nut
7.68
UK 04/2006
Qty / PU
Order no.
100
21100-507
Square nut, M2.5, St, nickel100 plated
21100-359
M2.5 × 12, St, nickel-plated
Electronics Packaging
www.schroff.biz
Buch für druck 060411.book Seite 69 Dienstag, 11. April 2006 5:36 17
Frame type plug-in units – Components Extruded side panel for plug-in units Delivery comprises Item 4a
Qty 1
Description Extruded side panel, Al extrusion
Order Information
KAA46412
3U
Description left, right left, right left left right right
Depth D mm 167 227 167 227 167 227
Order no. 34811-391 34811-393 34811-401 34811-403 34811-411 34811-413
Delivery may be in Standard Pack Quantity: Please order 10 pieces or a multiple. Pricing is per individual item.
86.1 100.8 111.4
100 75
Height U 3 3 6 6 6 6
Note 13
8.45
10
쮿 At 6 U, the assembly with printed board assembly type A is recommended to secure the printed board 쮿 Printed board assembly, see page 7.74
3.2 D
15.8
KAA42600
6U
For further information www.schroff.biz/oneclick oneClick code = Order no.
108.75
233.4 208.5
234.1 244.8 27.4
6.7
13
8.45
10
3.2
15.8
D KAA42602
Depth extrusion for plug-in units Delivery comprises Item 4b
Qty 1
Description Depth extrusion, Al extrusion
Order Information Depth D mm 167 227
E mm -
F mm 140 200
Order no. 34811-381 34811-383
Delivery may be in Standard Pack Quantity: Please order 10 pieces or a multiple. Pricing is per individual item. 04802060
For further information www.schroff.biz/oneclick
F
oneClick code = Order no.
E
6.8
2.5 21.4
13.45
13
8.45
10
15.8
3.2
M2.5
n x 10 D KAA42601
Electronics Packaging
www.schroff.biz
UK 04/2006
7.69
Buch für druck 060411.book Seite 70 Dienstag, 11. April 2006 5:36 17
Frame type plug-in units – Components Side panel for plug-in units 쮿 Instead of extruded side panel, but can only be used together with depth extrusion
Delivery comprises Item 5
Qty 1
Description Side panel, to screw on, Al, 1 mm
Order Information KAA46414
86
94.2
3U
Height U 3 3 6 6
Depth D mm 166.7 226.7 166.7 226.7
Order no. 34811-224 34811-226 34811-233 34811-235
Delivery may be in Standard Pack Quantity: Please order 10 pieces or a multiple. Pricing is per individual item.
D - 26.7 D KAA44940
6U
For further information www.schroff.biz/oneclick
27.4
219.5 227.7
oneClick code = Order no.
7
D - 26.7 D KAA42608
7.70
UK 04/2006
Electronics Packaging
www.schroff.biz
Buch für druck 060411.book Seite 71 Dienstag, 11. April 2006 5:36 17
Frame type plug-in units – Components Cover for plug-in units Delivery comprises (kit) Item 1
Qty 1
Description Cover, to screw on, Al, 1 mm
Order Information Width KAA45172
HP 10 12 14 21 28 42 KAA45173
With perforation, T = 167 mm Order no.
With perforation, T = 227 mm Order no.
Without perforation, T = 167 mm Order no.
Without perforation, T = 227 mm Order no.
34811-548 34811-100 34811-101 34811-102 34811-103 34811-104
34811-549 34811-109 34811-110 34811-111 34811-112 34811-113
34811-040 34811-041 34811-042 34811-043 34811-044 34811-045
34811-060 34811-061 34811-062 34811-063 34811-064 34811-065
Delivery may be in Standard Pack Quantity: Please order 10 pieces or a multiple. Pricing is per individual item. HP = Front panel width
For further information www.schroff.biz/oneclick oneClick code = Order no.
KAA45174
Guide rails in plug-in units 쮿 For assembly into perforated covers if more than one printed board has to be installed into the plug-in units
Delivery comprises Item 1
Qty 1
Description Guide rail, groove width 2 mm, PPE, UL 94 V-0, black
Order Information Description For 160 and 220 mm deep plug-in units
Order no. 60809-004
Delivery may be in Standard Pack Quantity: Please order 10 pieces or a multiple. Pricing is per individual item. KAA45903
For further information www.schroff.biz/oneclick oneClick code = Order no.
A4-2687
Electronics Packaging
www.schroff.biz
UK 04/2006
7.71
Buch für druck 060411.book Seite 72 Dienstag, 11. April 2006 5:36 17
Frame type plug-in units – Components Rear panel for plug-in units 쮿 Rear panel with cut-out for 1 connector (type 4) 쮿 Rear panel with cut-out for several connectors (type 5)
Delivery comprises Item 3a/b
Qty 1
Description Rear panel, Al, 1.5 mm
Order Information Height
KAA46404
3U
Width
Cut-out for 1 connector Order no.
U HP 3 10 1) 34811-136 3 12 1) 34811-137 3 14 34811-138 3 21 34811-139 3 28 34811-140 3 42 34811-141 6 10 34811-156 6 12 34811-157 6 14 34811-158 6 21 34811-159 6 28 34811-160 6 42 34811-161 1) Rear panel without cut-out
Cut-out for several connectors Order no. 34811-146 34811-147 34811-148 34811-149 34811-150 34811-151 34811-166 34811-167 34811-168 34811-169 34811-170 34811-171
Delivery may be in Standard Pack Quantity: Please order 5 pieces or a multiple. Pricing is per individual item.
04802068
For further information www.schroff.biz/oneclick oneClick code = Order no.
243.5
243.5
6U
04802069
TE = HP
7.72
UK 04/2006
Electronics Packaging
www.schroff.biz
Buch für druck 060411.book Seite 73 Dienstag, 11. April 2006 5:36 17
Frame type plug-in units – Components Assembly kit for plug-in units 3/6 U Delivery comprises Item Qty Description 8a 2 Square nut, M2.5, St, nickelplated 8b 2 Countersunk screw, M2.5 × 12, St, nickel-plated 8c 4 Collar screw, M2.5 × 11 and 12.3, St, nickel-plated 8d 4 Sleeve for form hole 5.9 × 3.3 8e 8 Raised countersunk head screw, M3 × 20, St, zinc-plated 8f
16
8g
12
Application Assembly of handle on front panel Assembly of handle on front panel Assembly of front panel on horizontal rail Collar screw guide Assembly of front and rear panel on extruded side panel/side panel rear angle Countersunk screw, M2.5 × 5.3, Assembly of cover St, zinc-plated Countersunk screw, Assembly of side cover M2.5 × 6, St, zinc-plated
Order Information Description Assembly kit (items 8a ... 8g) Raised countersunk head screw item 8e Countersunk screw item 8f
Qty / PU 1 100 100
Order no. 21101-567 21101-598 21101-597
KAA46416
Electronics Packaging
www.schroff.biz
UK 04/2006
7.73
Buch für druck 060411.book Seite 74 Dienstag, 11. April 2006 5:36 17
Frame type plug-in units – Components Printed board assembly on plug-in units The printed board assembly is dependent on: 쮿 The wiring method of the printed boards in the plug-in unit type 5 쮿 The wiring method of the subrack into which the plug-in unit is assembled
Plug-in unit wiring options 1)
2)
3) 1) Slot 1:
Male connector assembled on the rear panel of the plug-in unit. Connector assembled on the subrack. Assembly of printed board type A or B. Slot 2 to x: Printed boards assembled on the rear panel of the plug-in unit (type B). 2) Slot 1: Male connector assembled on the rear panel of the plug-in unit. Connector assembled on the subrack. Assembly of printed board type A or B. Slot 2 to x: Printed boards assembled on the rear panel of the plug-in unit (type C). 3) Slot 1: All male connectors assembled on the plug-in unit. All connectors assembled on the subrack. Slot 1: Printed board assembly type A or B Slot 2 to x: Printed board assembly type B KAA4617
BGA45171
BGA42785
Printed board assembly on extruded side panel, type A 쮿 Assembly of a printed board on extruded side panel or depth extrusion 쮿 Connection to subrack with a connector
Order Information
A4-2669
Item Description Printed board assembly, St, 1.5 mm, 1 RAL 7035, die-cast Cheesehead screw with slot, St, 2 1.5 mm, RAL 7035, M2.5 × 12, St, nickel-plated Pozidrive c/sk screw, St, 1.5 mm, 3 RAL 7035, M2.5 × 8, St, nickel-plated
Qty / PU
Order no.
1
60809-032
100
21100-148
100
21101-568
Delivery may be in standard pack quantity: Please order 10 pieces of Printed board assembly or a multiple. Pricing is per individual item.
For further information www.schroff.biz/oneclick oneClick code = Order no. KAA45902
7.74
UK 04/2006
Electronics Packaging
www.schroff.biz
Buch für druck 060411.book Seite 75 Dienstag, 11. April 2006 5:36 17
Frame type plug-in units – Components Printed board assembly on plug-in unit rear panel, type B 쮿 Assembly of printed board with brackets on the plug-in unit type 5 rear panel (items 1a and 1b) 쮿 Connection to subrack with several connectors
Order Information Item 1a b1 2 3 a2-109
Description Bracket bottom, St, 1.5 mm Shakeproof washer, St, 1.5 mm, 2.6, nickel-plated Countersunk screw, St, 1.5 mm, M2.5 x 4, St, nickel-plated, with slot
Qty / PU 1 1
30809-412 30809-411
Order no.
100
21100-142
100
21101-218
Delivery may be in standard pack quantity: Please order 10 pieces of brackets or a multiple. Pricing is per individual item.
For further information www.schroff.biz/oneclick oneClick code = Order no.
Assembly, type C 쮿 Assembly of connectors on plug-in unit rear panel (see wiring option 2) 쮿 Connection to subrack with only one connector
Order Information Item 1 2 2 3
Description Bracket, St, 1.5 mm Tubular rivet, St, 1.5 mm, B 2.5 × 0.25 × 5 Shakeproof washer, St, 1.5 mm, A2.6, nickel-plated Pozidrive pan head screw, St, 1.5 mm, M2.5 × 4, St, nickel-plated
Qty / PU 1
30809-211
Order no.
100
21100-459
100
21100-142
100
21101-218
Delivery may be in standard pack quantity: Please order 10 pieces of brackets or a multiple. Pricing is per individual item.
A1-44
For further information www.schroff.biz/oneclick oneClick code = Order no.
Electronics Packaging
www.schroff.biz
UK 04/2006
7.75
Buch für druck 060411.book Seite 76 Dienstag, 11. April 2006 5:36 17
Frame type plug-in units – Components Assembly instructions for plug-in units 쮿 Assembly grid for guide rails: 1 HP 쮿 Minimum gap between 2 guide rails: 2 HP 1 printed board (plug-in unit type 4)
Plug-in unit width
Maximum
HP
mm
10 12 14 21 28
– 20.32 30.48 66.04 101.60
quantity of printed boards 1 3 4 7 11
KAA44869
Several printed boards (plug-in unit type 5)
H
1)
2) 4.07
2 TE TE x 5.08
H
1)
2) 4.07
min. 13.8
2 TE min. 2 TE
min. 2 TE b TE x 5.08
KAA44869
1) 2)
Division line Guide rail assembly turned by 180° to general position
7.76
UK 04/2006
Electronics Packaging
www.schroff.biz
Buch für druck 060411.book Seite 77 Dienstag, 11. April 2006 5:36 17
Shielded plug-in units 3 U shielded plug-in units Shielded plug-in units
쮿 Protection of printed boards against mechanical damage 쮿 Front panel: unshielded or EMC shielded 쮿 Dissipation of electrostatic charge 쮿 Suitable for all subracks 쮿 Suitable for cases: ratiopacPRO/-air, propac and compac 쮿 Printed boards in the euroboard format 100 × 160 mm and 100 × 220 mm respectively can be assembled 쮿 Applicable connectors in accordance with EN 60603 (DIN 41612), types: B, C, D, F, H, R
Delivery comprises (kit) 04792001
Item 1
Qty 1
2 3 4 5
1 1 1 1
Description Shielded: front panel with slots for contact strips, Al, front anodised, rear colourless chromated Handle, PPE, grey, UL 94 V-1 Side panel, Al extrusion Cover, Al, 1 mm, with perforation Assembly kit
Order Information
A4-2635
Version 7 HP
KAA45891
Width B Description T = 167 mm HP Order no. 7 unshielded 24811-397 10 unshielded 24811-398 12 unshielded 24811-399 14 unshielded 24811-400 7 shielded 20846-359 10 shielded 20846-360 12 shielded 20846-361 14 shielded 20846-362 EMC stainless steel gasket Item 6, St, 2 pieces per front panel necessary, PU = 10 pieces EMC stainless steel gasket Item 6, St, 2 pieces per front panel necessary, PU = 100 pieces
T = 227 mm Order no. 24811-413 24811-414 24811-415 24811-416 20846-391 20846-392 20846-393 20846-394 21101-705 21101-706
For further information www.schroff.biz/oneclick oneClick code = Order no.
KAA45892
KAA43075
Electronics Packaging
www.schroff.biz
UK 04/2006
7.77
Buch für druck 060411.book Seite 78 Dienstag, 11. April 2006 5:36 17
Shielded plug-in units 6 U shielded plug-in units Shielded plug-in units
쮿 Protection of printed boards against mechanical damage 쮿 Front panel: unshielded or EMC shielded 쮿 Dissipation of electrostatic charge 쮿 Suitable for all subracks 쮿 Suitable for cases: ratiopacPRO/-air, propac and compac 쮿 Printed boards in euroboard format 233.35 × 160 mm and 233.35 × 220 mm respectively can be assembled 쮿 Applicable in accordance with EN 60603 (DIN 41612), types: B, C, D, F, H, R
Delivery comprises (kit) 04792002
Item 1a
Qty 1
2 3 4 5
1 1 1 1
Description Unshielded: front panel without slots, Al, front anodised, rear colourless chromated Handle, PPE, grey, UL 94 V-1 Side panel, Al extrusion Cover, Al, 1 mm, with perforation Assembly kit
Order Information
KAA45893
Width B Description T = 167 mm HP Order no. 7 unshielded 24811-405 10 unshielded 24811-406 12 unshielded 24811-407 14 unshielded 24811-408 7 shielded 20846-367 10 shielded 20846-368 12 shielded 20846-369 14 shielded 20846-370 EMC stainless steel gasket Item 6, St, 2 pieces per front panel necessary, PU = 10 pieces EMC stainless steel gasket Item 6, St, 2 pieces per front panel necessary, PU = 100 pieces
T = 227 mm Order no. 24811-421 24811-422 24811-423 24811-424 20846-399 20846-400 20846-401 20846-402 21101-707 21101-708
For further information www.schroff.biz/oneclick oneClick code = Order no.
A4-2636
KAA43074
7.78
UK 04/2006
Electronics Packaging
www.schroff.biz
Buch für druck 060411.book Seite 79 Dienstag, 11. April 2006 5:36 17
HF plug-in units HF plug-in unit kits HF plug-in units
쮿 With shielding against high-frequency radiation 쮿 Plug-in units for assembly of printed boards in HP grid 쮿 All-round closed plug-in unit frame with cooling fins
Delivery comprises (kit) Item 1
Qty 1
2
1
3
1
4
1
5 6
2 1
04892005
Description Body tube, Al extrusion, black anodised, cut edges clean Front panel with slots for EMC stainless steel gasket, pressed in alignment pin , Al, 2.5 mm, front anodised, rear colourless chromated Static plastic handle, PPE, grey, Al,identification plate, Al, anodised, cut edges clean Rear panel, Al, 1.5 mm, chromated without cut-out EMC stainless steel gasket Assembly kit
Order Information
04802050
Technical data HF plug-in unit HP 7 10 12 14 21 28
L = 167 mm 1.68 1.62 1.56 1.50 1.06 0.94
Electronics Packaging
Thermal resistance K/W L = 227 mm 1.51 1.46 1.40 1.35 0.95 0.85
www.schroff.biz
Height U 3 3 3 3 3 3 3 3 3 3 3 3
Width HP 7 10 12 14 21 28 7 10 12 14 21 28
L mm 167 167 167 167 167 167 227 227 227 227 227 227
Order no. 20809-529 20809-530 20809-531 20809-532 20809-533 20809-534 20809-536 20809-537 20809-538 20809-539 20809-540 20809-541
For further information www.schroff.biz/oneclick oneClick code = Order no.
UK 04/2006
7.79
Buch für druck 060411.book Seite 80 Dienstag, 11. April 2006 5:36 17
HF plug-in units – Components HF body tube Components
Delivery comprises Qty 1
Description HF body tube, Al extrusion, black anodised, cut edges clean
Order Information Height U 3 3 3 3 3 3
Width HP 7 10 12 14 21 28
B mm 26.3 41.6 51.7 61.9 97.5 133
L = 167 mm L = 227 mm Order no. Order no. 30809-667 30809-677 30809-675 30809-673 30809-671 30809-669
30809-668 30809-678 30809-676 30809-674 30809-672 30809-670
L = 1 mm Order no. 30809-679 30809-698 30809-699 30809-680 30809-681 30809-682
B = internal width dimension KAA45832
For further information www.schroff.biz/oneclick oneClick code = Order no.
A4-247c
10, 14–28 HP
TE = HP
A4-247a Dimensions table
Dimension 10 HP mm n 3 × 5.08 A 47.3
14 HP 7 × 5.08 67.7
21 HP 14 × 5.08 103.2
28 HP 21 × 5.08 138.8
Slide nut for HF body tube 쮿 The slide nuts can be pushed into the groove of the side panel on the right
Order Information Description Slide nut M2.5; SW 7 Slide nut M3, SW 7
Qty / PU 100 100
Order no. 21100-112 21100-289
For further information www.schroff.biz/oneclick A4/247b
7.80
UK 04/2006
oneClick code = Order no.
Electronics Packaging
www.schroff.biz
Buch für druck 060411.book Seite 81 Dienstag, 11. April 2006 5:36 17
HF plug-in units – Components Front panel with handle Delivery comprises
2
Item 1
Qty 1
3
1
Description Front panel, Al, 2.5 mm Front: anodised, Rear: colourless chromated Handle, PPE, UL 94 V-1, grey
Order Information
1
3
KAA45831
3.3
Unshielded ø5.9
Width
Unshielded
HP 7 10 12 14 21 28
Order no.
With slot for EMC stainless steel gasket, pushed-in alignment pin Order no.
20838-001 20838-002 20838-003 20838-004 20838-005 20838-006
20838-093 20838-094 20838-095 20838-096 20838-097 20838-098
쮿 Please order EMC stainless steel gasket for front panels with slot separately, see page 7.67
122.4
99
128.4
122.4
99
128.4
ø2.5
10.16
10.16
14.7
14.7
3
ø2.5
7.45
3
7.45
For further information www.schroff.biz/oneclick
ø2.5 B A
oneClick code = Order no. 2.5
35.22
2.5
X
ø2.5
ø2.5
KAA43073
With slot for EMC stainless steel gasket
10.7
10.7
3.3
ø5.9
ø2.5
122.4
1.8
99
128.4
122.4
99
128.4
1.8
10.16
10.16
7.45
5.08 35.22
7.45
5.08
ø2.5 B A
ø2.5
ø2.5
X
ø2.5
1
1
0.65
ø2.5
0.65
2.5
2.5
5
5
3
14.7
14.7
3
ø2.5
1.8
1.8
04803052 Dimensions table
Front panel HP 7 10 12 14 21 28
A mm 35.2 50.5 60.6 70.8 106.3 141.9
Electronics Packaging
B mm – 35.6 45.7 55.9 91.4 127.0
www.schroff.biz
UK 04/2006
7.81
Buch für druck 060411.book Seite 82 Dienstag, 11. April 2006 5:36 17
HF plug-in units – Components EMC stainless steel gasket 쮿 The EMC stainless steel gasket is pushed into the lateral slots of the shielded front panels
Order Information Item
Height U
Height mm
9
3
97
9
3
97
Material Stainless steel Stainless steel
Qty / PU
Order no.
10
21101-705
100
21101-706
KAA46411
Assembly tool 쮿 For easier assembly of EMC stainless steel gasket
Order Information Description Assembly tool
Qty / PU 1
Order no. 24560-270
aza45937
Rear panel Delivery comprises (kit) Qty 1 1
Description Rear panel, Al, chromated
Order Information Width
A
H
HP 7 10 12 14 21 28
mm 32 47.3 57.5 67.7 103.2 138.8
mm 108.4 108.4 108.4 108.4 108.4 108.4
Without cut-out Order no.
With cut-out Order no.
30809-635 30809-636 30809-637 30809-638 30809-639 30809-640
30809-641 30809-642 30809-643 30809-644 30809-645 30809-646
KAA45834
Note Cut-outs in the rear panels are suitable for connector types in accordance with EN 60603 (DIN 41612): 7 HP 10 – 28 HP
B, C, D, R B, C, D, R, F, H, MF, MH
Rear panels with connector cut-outs reduce EMC screening.
For further information www.schroff.biz/oneclick oneClick code = Order no. 04802053
7.82
UK 04/2006
Electronics Packaging
www.schroff.biz
Buch für druck 060411.book Seite 83 Dienstag, 11. April 2006 5:36 17
HF plug-in units – Components Assembly kit for HF plug-in unit Delivery comprises (kit) Item 4 5 6 7 8 9 10
Qty 4 4 1 1 2 2 5
Description Sleeve, PA, grey Collar screw M2.5 × 11 and 12.3, St, nickel-plated Square nut M2.5, St, nickel-plated Countersunk screw M2.5 × 12, St, nickel-plated Cylinder head screw M2.5 × 16, St, nickel-plated Raised countersunk screw M2.5 × 8, St, nickel-plated Countersunk screw M2.5 × 6, St, nickel-plated
Order Information Description Assembly kit for one plug-in unit
Order no. 21100-105
For further information www.schroff.biz/oneclick oneClick code = Order no. 04802054
Mounting bracket for printed boards Order Information Item 1 1 2
Description Mounting bracket, top, St, 1.5 mm Mounting bracket, bottom, St, 1.5 mm Cheesehead screw, M2.5 × 4, St, nickel-plated
Qty / PU 1
30809-701
Order no.
1
30809-700
100
21100-431
Delivery may be in standard pack quantity: Please order 10 pieces of mounting angles or a multiple. Pricing is per individual item
For further information www.schroff.biz/oneclick oneClick code = Order no.
KAA45843
Electronics Packaging
www.schroff.biz
UK 04/2006
7.83
Buch für druck 060413.book Seite 84 Donnerstag, 13. April 2006 5:47 17
PB accessories Printed board handle A PB accessories
쮿 Assembly behind front panels 쮿 Only use printed board handle in conjunction with printed board retainer A (60817-097) 쮿 Insertion and extraction function 쮿 Labelling option
Order Information B4-2728
Item Description Printed board 1 handle A 2 Pivot pin Identification 3 strip
Material
Colour Qty / PU Order no. SPQ 1) PBTP, UL94V-0 red 60817-096 10 pieces Stainless steel – 100 21100-671 Polyester film matt100 21100-672 self-adhesive silver
1) Delivery may be in standard pack quantity: Please order 10 pieces of printed board handles or a multiple. Pricing is per individual item
For further information www.schroff.biz/oneclick
BZA42727
oneClick code = Order no.
BZA42724
Printed board retainer A PB accessories
쮿 Can also be used without printed board handle 쮿 Can be assembled on upper and lower horizontal rail
Order Information Item Description Printed board retainer A for top 4 and bottom (not for europacPRO)
Material
Colour Qty
PPO, red UL 94 V-0
Order no.
SPQ 1) 60817-097 10 pieces
1) Delivery may be in standard pack quantity: Please order 10 pieces of printed board retainers or a multiple. Pricing is per individual item.
Note C4-2728
쮿 Not usable: – for europac PRO, ratiopac PRO – for guide rails with screw connection – for guide blocks – for front light weight horizontal rails with clipped in cover plate 쮿 Minimum spacing of guide rail 3 HP
For further information www.schroff.biz/oneclick oneClick code = Order no.
7.84
UK 04/2006
Electronics Packaging
www.schroff.biz
Buch für druck 060413.book Seite 85 Donnerstag, 13. April 2006 5:47 17
PB accessories Printed board handle europacPRO/ ratiopacPRO PB accessories
쮿 Assembly behind front panels 쮿 Printed board handle can only be used in conjunction with printed board retainer A (64560-377) 쮿 Insertion and extraction function 쮿 Labelling option
Order Information Item
BPA45909
1
3
Description Printed board handle with integrated assembly pin Identification strip (1 sheet = 438 pieces)
Material
Colour
Qty / PU
Order no.
PBT, UL 94 V-0
red
10
24560-378
Polyester film self-adhesive
white/ matt
1
60817-228
Note 쮿 Can only be used together with guide rails europac PRO for accessories 쮿 Minimum spacing of guide rail 3 HP BPA45910
For further information www.schroff.biz/oneclick oneClick code = Order no.
BZA42724
Printed board retainer europacPRO/ ratiopacPRO PCB accessories
쮿 Can also be used without printed board handle 쮿 Can be assembled on upper and lower horizontal rail
Order Information Item Description Material Colour Qty / PU Order no. Printed board PBTP, 1 red 10 retainer europacPRO, 24560-377 UL 94 V-0 PBT, UL 94 V-0, red
Note 쮿 Minimum spacing of the guide rail 3 HP 쮿 Not usable on cases propac, compac, inpac 06002057
For further information www.schroff.biz/oneclick oneClick code = Order no.
Electronics Packaging
www.schroff.biz
UK 04/2006
7.85
Buch für druck 060413.book Seite 86 Donnerstag, 13. April 2006 5:47 17
PB accessories Printed board handle B1 PB accessories
쮿 To screw or rivet onto printed boards 쮿 Can be used with printed board retainer B 쮿 Labelling option 쮿 Extraction function only
Order Information
B42729
Item Description Printed board 1 handle to screw on Printed board 1a handle to rivet on
Colour Qty / PU Order no. SPQ 1) red 60817-067 10 pieces SPQ 1) red 60817-072 10 pieces
2
–
100
21100-515
–
100
21100-076
white
100
21100-569
2a 3
Material PBTP, UL 94 V-0 PBTP, UL 94 V-0 St, nickelCountersunk plated, screw DIN 965 Tubular rivet Brass Polyester Indentification strip film selfadhesive
1) Delivery may be in standard pack quantity: Please order 10 pieces of printed board handles or a multiple. Pricing is per individual item. BZB42725
For further information www.schroff.biz/oneclick oneClick code = Order no.
BZA42724
Printed board handle B2 PB accessories
쮿 To screw onto printed boards; can only be used on the lower horizontal rail 쮿 Can be used with printed board retainer B 쮿 Extraction function only 쮿 Labelling option
Order Information
BZA46427
Item Description Printed board 1 handle Socket cap head 2 screw with slot, M2.5 × 6
Material PBTP, UL 94 V-0
Colour Qty / PU Order no. SPQ 1) red 60817-055 10 pieces
St, nickelplated
–
100
21100-146
1) Delivery may be in standard pack quantity: Please order 10 pieces of printed board handles or a multiple. Pricing is per individual item.
For further information www.schroff.biz/oneclick oneClick code = Order no. BZB42726
7.86
UK 04/2006
Electronics Packaging
www.schroff.biz
Buch für druck 060413.book Seite 87 Donnerstag, 13. April 2006 5:47 17
PB accessories Printed board retainer B PB accessories
쮿 Can be assembled on upper and lower horizontal rail 쮿 Can also be used without printed board handle 쮿 Can also be used with guide blocks
Order Information Item 4 4a
Description Printed board retainer at bottom Printed board retainer at top
Material Colour PPO, red UL 94 V-0 PPO, black UL 94 V-0
Qty Order no. SPQ 1) 60817-054 10 pieces SPQ 1) 60817-071 10 pieces
1) Delivery may be in standard pack quantity: Please order 10 pieces of printed board retainers or a multiple. Pricing is per individual item. BZA46428
Note 쮿 Not usable for europac PRO and ratiopac PRO
For further information www.schroff.biz/oneclick oneClick code = Order no.
Printed board handle, can be locked PCB accessories
Order Information Item Description Material Colour Qty Printed board handle, PPE, SPQ 1) 1 grey can be locked UL 94 V-1 10 pieces Printed board handle, PPE, SPQ 1) 1 red can be locked UL 94 V-1 10 pieces Identification strips Item 2, 1 sheet = 200 strips, white cardboard, 50 × 5 × 0.3 mm Transparent strips Item 3, 50 × 5 × 0.3 mm, PU 100 pieces
Order no. 60800-039 60800-045 69000-011 69000-007
1) Delivery may be in standard pack quantity: Please order 10 pieces of printed board handles or a multiple. Pricing is per individual item.
A3261
For further information www.schroff.biz/oneclick oneClick code = Order no.
Electronics Packaging
www.schroff.biz
UK 04/2006
7.87
Buch für druck 060413.book Seite 88 Donnerstag, 13. April 2006 5:47 17
PB accessories Printed board handle, to screw/rivet on PB accessories
Order Information Item Description Material Colour Qty Printed board handle, SPQ 1) 1 Acrylic yellow to screw/rivet on 10 pieces Printed board handle, SPQ 1) 2 Acrylic red to screw/rivet on 10 pieces Printed board handle, SPQ 1) 1 Acrylic green to screw/rivet on 10 pieces Identification strip Item 2, white cardboard, 1 sheet, PU 100 pieces Pozidrive flathead screw M2.5 × 8, St, nickel-plated, PU 100 pieces Hexagon nut A 2.5, nickel-plated, PU 100 pieces
A4-1302
Order no. 60817-050 60817-051 60817-052 69000-969 21101-069 21100-144
1) Delivery may be in standard pack quantity: Please order 10 pieces of printed board handles or a multiple. Pricing is per individual item.
For further information www.schroff.biz/oneclick oneClick code = Order no.
Printed board jacket PCB accessories
쮿 For assembly of printed boards in euroboard format 100 x 160 mm 쮿 For spring contact strips in accordance with EN 60603 쮿 Distance between printed board and board jacket 3 mm
Delivery comprises (kit) Item 1 3 4 5
Qty 1 2 2 2
Description Printed board jacket, PC, grey Retention bracket, St, 2 mm, nickel-plated Socket cap head screw M 2.5 × 6, St, nickel-plated Socket cap head screw M 4 × 12, St, nickel-plated
Order Information LKA42605
Retention bracket (DIN 41 612)
Item Description Printed board jacket 1 EN 60603
Material Colour Qty / PU PC
grey
1
Order no. 20800-032
쮿 Connector (item 2) see chapter Accessories - Connectors
For further information www.schroff.biz/oneclick oneClick code = Order no. LKA42606
7.88
UK 04/2006
Electronics Packaging
www.schroff.biz
Buch für druck 060413.book Seite 89 Donnerstag, 13. April 2006 5:47 17
PB accessories Printed board reinforcement PB accessories
쮿 Protects large printed boards against deformation 쮿 Combines all connectors with one another as the second leg (in accordance with directives IEEE, P 896, Nubus, Multibus® II etc.) 쮿 Assembly points suitable for connectors in accordance with EN 60603, type B, R, C and D
Delivery comprises (kit) Item 1
Qty 1
2 3
6 6
Description Printed board reinforcement, Al extrusion, anodised, cut edges untreated Socket cap head screws M 2.5 × 12, St, nickel-plated U washer 2.6, St, nickel-plated
LKA42609
Order Information Description For 9 U printed board
Height H mm 361.6
Order no. 20809-441
For further information www.schroff.biz/oneclick oneClick code = Order no. LKA42593
Electronics Packaging
www.schroff.biz
UK 04/2006
7.89
Buch fĂźr druck 060413.book Seite 90 Donnerstag, 13. April 2006 5:47 17
PB accessories Printed board cover PB accessories
쎿 Mechanical protection of the solder side
Order Information Description Printed board cover for euroboards (100 x 160 mm), PBTP, UL 94 V-0, black Printed board cover with low temperature expansion coefficient (same as FRA4 printed board); for euroboards (100 x 160 mm), LCP, UL 94 V-0, white Printed board cover for double euroboards (233.35 x 160 mm), PP, UL 94 V-0, black
Qty SPQ 1) 10 pieces
Order no. 61000-007
SPQ 1) 10 pieces
61000-177
SPQ 1) 10 pieces
61000-012
1) Delivery may be in standard pack quantity: Please order 10 pieces of printed board covers or a multiple. Pricing is per individual item. 11092008
100 x 160 mm
For further information www.schroff.biz/oneclick oneClick code = Order no.
LKA40520
233.35 x 160 mm
LKA30451
7.90
UK 04/2006
Electronics Packaging
www.schroff.biz
Buch fĂźr druck 060413.book Seite 91 Donnerstag, 13. April 2006 5:47 17
PB accessories Printed board bracket PB accessories
쎿 For the assembly of the printed board onto the front panel
14 / 14a 13
Order Information
5 / 5a
11
Item Description
5c / 5d 5b 5e
5
5a
BZA46430
Drill hole dimensions on the printed board
5b
3U 5c
5d
5e BGA43076
6U
4 holes for front panel/ printed board assembly, 4 pockets for hexagon nuts, PBT, UL 94 V-0, red, 1 piece 4 threads M2.5 for front panel/ printed board asembly, PBT UL 94 V-0, grey, 1 piece Hole for front panel assembly, with pocket for hexagon nut, hole for self-tapping screw for printed board assembly, PBT UL 94 V-0, grey, 1 piece 2 threads M2.5 for front panel/ printed board assembly, Zn die-cast, 1 piece Thread M 2.5 for front panel assembly, hole for printed board assembly, Zn die-cast, 1 piece 4 threads M2.5 for front panel/ printed board assembly for recessed installation of printed board (20 mm), mounting depth 192.24 mm, St, zinc-plated, not for europacPRO, ratiopacPRO, 1 piece
Required Required quantity quantity for 3 U for 6 U
Order no.
1
2
60807-011
1
2
60807-211
2
4
60807-183
2
4
60807-181
2
4
60807-203
1
2
30808-871
Delivery may be in Standard Pack Quantity: Please order 10 pieces or a multiple. Pricing is per individual item.
For further information www.schroff.biz/oneclick oneClick code = Order no.
BGA43077
Electronics Packaging
www.schroff.biz
UK 04/2006
7.91
Buch für druck 060413.book Seite 92 Donnerstag, 13. April 2006 5:47 17
PB accessories Contact spring for electrostatic discharge (ESD) PB accessories
쮿 Assembly between front panel and die-cast printed board bracket of a plug-in unit 쮿 Discharge via a horizontal rail with a conductive finish (chromated) 쮿 Configuration top and/or bottom
Order Information Item Description Material Contact spring for electro- St, corrosion18 static discharge (ESD) free
Qty / PU 50
Order no. 21101-147
Note BGA46426
쮿 Not usable for subrack europacPRO and desk-top case ratiopacPRO
For further information www.schroff.biz/oneclick oneClick code = Order no.
A4-2184
7.92
UK 04/2006
Electronics Packaging
www.schroff.biz
Buch f端r druck 060413.book Seite 93 Donnerstag, 13. April 2006 5:47 17
PB accessories
Electronics Packaging
www.schroff.biz
UK 04/2006
7.93
Buch für druck 060413.book Seite 94 Donnerstag, 13. April 2006 5:47 17
Assembly parts Assembly parts 쮿 Quick-release fastener 쮿 Sleeve 쮿 Screws 쮿 Cage nuts 쮿 Tools Assembly parts
Quick-release fastener 쮿 Vibration and shock proof 쮿 1/4 rotary lock with defined stop 쮿 Detection of fastening position with slot position
Delivery comprises Qty 1 1
Description Locking pin, St, locking, Zn die-cast Press-in sleeve, POM
Order Information 06702062
Item 1 1 2 2
Description With slotted head, grey With slotted head, black With knurled head, grey With knurled head, black
Qty / PU 100 100 100 100
Order no. 21101-847 21101-848 21101-849 21101-850
Note Quick-release fastener: mounting without threaded insert
Sleeve Assembly parts
Order Information Item 2 2 1 1 1 1 1 1
Description Plastic sleeve, PA, grey Plastic sleeve, PA, black Metal sleeve, brass, nickel-plated Metal sleeve, brass, nickel-plated Metal sleeve, brass, black Metal sleeve, brass, black Metal sleeve, stainless steel Metal sleeve, stainless steel
Qty / PU 100 100 10 100 10 100 10 100
Order no. 21100-464 21100-591 21100-659 21100-660 21100-885 21100-886 21100-661 21100-662
Note 쮿 Metal sleeves have to be pressed into the front panels 쮿 Not for front panels 2 HP 쮿 Please order collar screw (item 3) separately, see page 7.95 06702061
7.94
UK 04/2006
Electronics Packaging
www.schroff.biz
7_41_baugruppen_zubehoer_e_.fm Seite 95 Mittwoch, 19. April 2006 10:40 10
Assembly parts Collar screw Assembly parts
Order Information Description
Application
Material
Dimension
Qty / PU
St, nickel-plated
M2.5 × 11
100
21100-748
For assembly of front panels if threaded strips are Ms, zinc-plated, black used; not for europacPRO and ratiopacPRO
M2.5 × 11
100
21100-749
V2A, only slot
M2.5 × 11
100
21101-323
St, nickel-plated
M2.5 × 12.3
100
21101-101
M2.5 × 12.3
100
21101-102
V2A
M2.5 × 12.3
100
21101-906
St, nickel-plated
M2.5 × 12.3
100
21101-782
St, zinc-plated, black
M2.5 × 12.3
100
21101-783
Ms, nickel-plated M2.5 × 11
50
21100-268
Ms, zinc-plated
M2.5 × 12.3
100
21101-749
For assembly of front panels if threaded strips are Ms, nickel-plated M2.5 × 12.3 used; also for europacPRO and ratiopacPRO horizontal rails with long lip
100
21101-909
100
21101-106
Collar screw with Pozidrive/slot
Order no.
AZA46586
For assembly of front panels if threaded strips are St, zinc-plated, used; also for europacPRO and ratiopacPRO black
Collar screw with For assembly of front panels if threaded strips are Torx used; also for europacPRO and ratiopacPRO AZA45941
For assembly of front panels if threaded strips are used; not for europacPRO and ratiopacPRO Collar screw with knurled head
AZA45929
Collar screw with For assembly of front panels if threaded strips are Ms, nickel-plated M2.5 × 11 knurled head/slot used; not for europacPRO and ratiopacPRO AZA45930
Electronics Packaging
www.schroff.biz
UK 04/2006
7.95
Buch für druck 060413.book Seite 96 Donnerstag, 13. April 2006 5:47 17
Assembly parts Countersunk screw Assembly parts
Order Information Description
Application
Material
Dimension
Qty / PU
Order no.
For plastic handle 3 HP/4 HP on front panel of plug-in units
St, nickel-plated
M2.5 × 6
100
21100-515
For handles on plug-in units
St, nickel-plated
M2.5 × 12
100
21100-507
For contact strips europacPRO, ratiopacPRO
St, zinc-plated
M4 × 5
100
24560-139
For mixed board assembly and assembly of shortened horizontal rail on support member, with GND/earthing function
St, zinc-plated
M4 × 14
100
24560-145
For printed boards on front panel
St, nickel-plated
M2.5 × 8
100
21100-429
St, nickel-plated
M2.5 × 10
100
21100-500
St, zinc-plated, black
M2.5 × 10
100
21100-649
St, nickel-plated
M3 × 8
100
21100-542
St, zinc-plated, black
M3 × 8
100
21100-648
For Al guide rails, heavy duty
St, zinc-plated, black
M2.5 × 7.3
100
24560-157
For 4.4" board height; guide rail on horizontal rail, europacPRO, ratiopacPRO
St, zinc-plated
M2.5 × 7.7
100
24560-158
For plastic guide rail on horizontal rail; for control St, zinc-plated panel bracket assembly on horizontal rail
M2.5 × 9.3
100
24560-141
Pozidrive c/sk screw
AZA45177
Countersunk screw with Torx
AZA46585
Raised Pozidrive c/sk screw For printed board bracket on the front panel
06702056
Pan head screw with torx
aza45922
7.96
UK 04/2006
Electronics Packaging
www.schroff.biz
7_41_baugruppen_zubehoer_e_.fm Seite 97 Mittwoch, 19. April 2006 10:41 10
Assembly parts Pan head screw Assembly parts
Order Information Description
Pan head Pozidrive c/sk screw
Application
Material
Dimension Qty / PU
Order no.
For brackets on plug-in units
St, nickel-plated
M2.5 × 4
100
21101-218
For Z or perforated rails on horizontal rails
St, nickel-plated
M2.5 × 5
100
21101-314
For spring contact strips on Z-rail cable ducting
St, nickel-plated
M2.5 × 6
100
21101-219
For printed boards on printed board bracket
St, nickel-plated
M2.5 × 8
100
21101-069
For printed boards on printed board bracket
St, nickel-plated
M2.5 × 10
100
21101-220
For handles on plug-in units
St, nickel-plated
M2.5 × 12
100
21101-221
For handles on plug-in units
St, nickel-plated
M2.5 × 16
100
21101-222
For mounting of horizontal/central rail on compac cases
St, zinc-plated
M5 × 12
100
21100-788
For printed board assembly
St, zinc-plated
M2.5 × 6
100
24560-159
For Z-rails and connector assembly
St, nickel-plated
M2.5 × 7
100
24560-147
For perforated rail
St, nickel-plated
M2.5 × 10
100
24560-148
For backplane assembly
St, nickel-plated
M2.5 × 12
100
24560-161
For backplane assembly
St, nickel-plated
M2.5 × 14
100
24560-162
For backplane assembly
St, nickel-plated
M2.5 × 16
100
24560-163
To screw on support bracket, rear hood, rear angle St, zinc-plated on side panel, extension bracket and adapter bracket
M4 × 6
100
24560-135
To screw on cover plate or chassis plate, with GND/ St, zinc-plated earthing function
M4 × 6
100
24560-151
For horizontal rail on side panel if guide rail bolted onto pin position 1
St, zinc-plated
M4 × 10
100
24560-155
For horizontal rail on side panel, with GND/earthing St, zinc-plated function
M4 × 14
100
24560-130
M2.5 x 12
100
21100-777
06702057
Pan head screw with Torx
AZA45940
Screw + securing For backplane assembly washer
St, nickel-plated
06702051
Electronics Packaging
www.schroff.biz
UK 04/2006
7.97
Buch für druck 060413.book Seite 98 Donnerstag, 13. April 2006 5:47 17
Assembly parts Description
Application
Material
Dimension Qty / PU
Order no.
Cheesehead screw with hexagon socket
For mounting of horizontal-/ central rail on compacPRO cases
St, zinc-plated
M5 × 12
100
21101-057
Taptite screw with For mounting of horizontal-/ central rail on hexagon socket compacPRO cases
St, zinc-plated
M5 × 12
100
21100-457
aza45184
06702050
Grub screw Order Information Description
Grub screw
Application
Material
Dimension
Qty / PU
Order no.
For threaded inserts M2.5 and perforated strips
Stainless steel
M2.5 × 9
100
21101-359
For threaded inserts M2.5
St, nickel-plated M2.5 × 8
100
21100-276
For threaded inserts M3
St, zinc-plated
M3.0 × 8
100
21100-646
BZA45853
Washer Assembly parts
Order Information Description
Application
Material
Dimension
Qty / PU
Order no.
For front panel, 2 HP
Plastic, PA
2.7 × 5 × 1
100
21101-121
For handles on plug-in units
St, nickel-plated A2.7 DIN 125
100
21100-721
For printed board assembly
St, nickel-plated 2.6
100
21100-142
Washer
AZA45178
Shakeproof washer AZA45180
7.98
UK 04/2006
Electronics Packaging
www.schroff.biz
Buch für druck 060413.book Seite 99 Donnerstag, 13. April 2006 5:47 17
Assembly parts Nut Assembly parts
Order Information Description
Application
Material
Dimension
Qty / PU
Order no.
Hexagon nut
For handles on plug-in units
St, nickel-plated M2.5
100
21100-144
Square nut
For handles on plug-in units
St, nickel-plated M2.5
100
21100-359
Square nut
For assembly of components on side panels, contact strips, chassis plates
St, zinc-plated
M4
100
24560-140
Qty / PU
AZA43239
AZA45927
AZA45921
Tubular rivets Assembly parts
Order Information Description
Application
Material
Dimension
Tubular rivets
For printed board assembly
-
B2.5 × 0,25 × 5 100
Order no.
21100-459
AZA45926
Slide nut for front horizontal rail Accessories
Order Information Description
Slide nut, AF 7
Application
Material
For front horizontal rail; alternative to threaded insert; not for europacPRO and ratiopacPRO
Dimension
Qty / PU
Order no.
M2.5
100
21100-112
M3
100
21100-289
Slide nut, St, nickel-plated, Slide, PA
A4-559-1
Slide nut for rear horizontal rail Accessories
Order Information Description
Application
Material
Dimension
Qty / PU
Slide nut, AF 5
For rear horizontal rail; alternative to threaded insert; not for europacPRO and ratiopacPRO
Slide nut, St, nickel-plated, Slide, PA
M2.5
100
Order no.
21100-425
05802056
Electronics Packaging
www.schroff.biz
UK 04/2006
7.99
Buch für druck 060413.book Seite 100 Donnerstag, 13. April 2006 5:47 17
Assembly parts Slide nut Assembly parts
쮿 For europacPRO and ratiopacPRO 쮿 The slide nut is inserted into the slot in the horizontal rail instead of threaded inserts
Delivery comprises (kit) Item 1 2
Qty 1 2
Description Slide, red, UL 94 V-0, PBT Nut M 2.5, St, zinc-plated
Order Information Description Slide nut kit 1 Slide nut kit 2
Description 100 slides / 200 nuts 12 slides / 24 nuts
Order no. 24560-165 24560-166
Note 쮿 Nuts used in location 3: Application for – hinged front panels 84 HP – full-width front panels or full-width rear panels 84 HP 쮿 Nuts used in location 4: Application for – hinged front panels 쮿 Nuts used in location 3 and location 4: Application for – two front panels
For further information www.schroff.biz/oneclick oneClick code = Order no.
06702060
Assembly kit Assembly parts
쮿 Subracks in cabinets or 19" case 쮿 Case with 19" brackets in cabinets
Delivery comprises (kit) Item 1 2 3
Qty 1 1 1
Description Screw M6 × 16, zinc-plated pozidrive Plastic washer, ABS, black Cage nut M6, zinc-plated
Order Information
SC128XXX
7.100
UK 04/2006
Description PU per 8 × (screw, washer, nut) 1 PU = per 50 × (screw, washer, nut) 1 PU = per 100 × (screw, sasher, nut)
Electronics Packaging
Order no. 21100-435 21101-809 21101-810
www.schroff.biz
Buch für druck 060413.book Seite 101 Donnerstag, 13. April 2006 5:47 17
Assembly parts Assembly tool Assembly parts
Order Information Description
Dimension Qty / PU
Order no.
T8 × 60
1
64560-026
T20 × 100
1
64560-027
T8
1
64560-028
T20
1
64560-029
Assembly tool for horizontal rails
–
1
24560-271
Assembly tool for front panels
–
1
24560-270
Torx screwdriver
AZA45925
Torx bit for screwdriver
AZA45924
aza45938
aza45937
Tape measure 쮿 Tape measure with cm, U and HP division (length 2 m) 쮿 Outer casing plastic, metal tape measure with automatic retraction
Order Information Description Tape measure
Qty / PU 1
Order no. 89009-001
32506001
Electronics Packaging
www.schroff.biz
UK 04/2006
7.101