Buch für druck 060321.book Seite 134 Dienstag, 21. März 2006 4:26 16
Outdoor
Overview ........... 0
Cabinets – Outdoor
Cabinets ............ 1
Wall mounted cases ............... 2
Accessories for cabinets and wall mounted cases .... 3
Climate control .... 4
Desk-top cases .... 5
Subracks/ 19" chassis ......... 6
41602001
Front panels, plug-in units ....... 7
Systems ............ 8
Power supply units ................ 9
Backplanes ....... 10
01603009
The double panel concept provides a natural air flow between external and internal panels, therefore considerable lower efforts for additional heat dissipation are necessary.
01603010
Optimum protection against vandalism due to internal mounting. Covers are easy to exchange.
Standard / Certifications
Individual project management
쮿 External dimensions according to: IEC 61969-1/2, IEC 60917-2-1
쮿 Specific dimensions
쮿 Internal dimensions according to: ETS 300119, part 2
Connectors, front panel component system ............ 11
01603005
The sealing material is selectable according to requirements (IP protection, EMC protection) and subsequently exchangeable.
쮿 Mechanical and electrical assembly 쮿 Thermal design
쮿 Type of protection IP 55 according to IEC 60529
쮿 Backup power supply
쮿 Protective GND/earth connections according to: EN 50178
쮿 Further services
쮿 Vibration according to IEC 61969-3 Class 2
Appendix ......... 12
1.134
UK 04/2006
Further important information can be found on the internet under www.schroff.biz Electronics Packaging
www.schroff.biz
1_40_outdoor_overview_e_.fm Seite 135 Mittwoch, 22. März 2006 12:24 12
Cabinets – Outdoor
Overview ......1.134
Outdoor
Outdoor Cabinet for the most rough applications 쮿 High stability up to earthquake security 쮿 Reduced weight through Aluminium construction 쮿 Assembly possibilities with 19", ETSI or other accessories 쮿 Tested thermal concepts 쮿 IP 55 and high security against vandalism Unibody
Unibody
The Unibody design is based on a cost optimised internal frame with removable covers made of Aluminium. This version is very beneficial for cabinets with relatively small dimensions where the access through the front door is sufficient for installation requirements.
Unibody . . . . . . 1.136 Unibody VENT . . 1.137 Unibody HEX . . . 1.138 Base/plinth . . . . 1.139 Wall mounting . . 1.140
Versions 쮿 With convection cooling 쮿 With fan cooling 쮿 With heat exchanger cooling
41603054
Text
Modular
Modular
The Modular design is based on an Aluminium profile frame with removable, double-walled covers. This version is very beneficial for large cabinets where access for installations is necessary from all sides.
Modular VENT . . 1.140 Modular HEX . . . 1.141 Base/plinth . . . . 1.142
Versions 쮿 With fan cooling 쮿 With heat exchanger cooling
41603051
Text
Available on request
Accessories
쮿 Individual configuration
Metric panel/ slide mounts . . . 1.143 19" panel/slide mounts . . . . . . . 1.143
쮿 Air conditioners
Electronics Packaging
www.schroff.biz
UK 04/2006
1.135
Buch für druck 060321.book Seite 136 Dienstag, 21. März 2006 4:26 16
Cabinets – Outdoor - Unibody Unibody Outdoor - Unibody
쮿 Heat dissipation through natural convection, max 6 W/K 쮿 IP 55 쮿 Double-walled, Al 쮿 One-piece Aluminium body 쮿 Base/plinth or wall mounting, delivery assembled
Delivery comprises (assembled)
41603054
T1
Item 1 2 3
Qty 1 2 1
4 5 6 7 8
1 1 1 4 1
Description Internal frame, Al Side panel, Al, RAL 7035 Front door, Al, RAL 7035, incl. handle, 3 point locking, lever handle with DIN half cylinder, opening angle 135°, door retainer at 120°, door hinged at the left Rear panel, Al, RAL 7035 Top cover, Al, RAL 7035 Base plate with cable connection plate, Al Depth member for 19" or metric panel/slide mounts GND/earthing kit, assembled
B1
Order Information
b1
h1
h
H
t1
Height Height Width Depth qW U mm mm mm W/K 16 930 700 500 5 20 1100 700 500 6 Base/plinth for Unibody Height 100 mm, width 700 mm, depth 500 mm, 1 piece Base/plinth for Unibody Height 200 mm, width 700 mm, depth 500 mm, 1 piece Wall mounting 1 kit
Order no. 11249-003 11249-005 21249-013 21249-015 21249-017
qW = specific heat dissipation capacity
25
쮿 Please order base/plinth and wall mounting separately, see page 1.139 쮿 Please order panel/slide mounts separately, see page 1.143
t2
B
For further information www.schroff.biz/oneclick
T 41603058
oneClick code = Order no.
Text
H mm 930 1100
H U 16 20
B mm 700 700
T mm 500 500
h mm 838 1013
b1 mm 536 536
t1 mm 400 400
t2 mm 350 350
h1 mm 736 911
B1 mm 730 730
T1 mm 530 530
t2 = max. 19" assembly dimension
1.136
UK 04/2006
Electronics Packaging
www.schroff.biz
Buch für druck 060321.book Seite 137 Dienstag, 21. März 2006 4:26 16
Cabinets – Outdoor - Unibody Unibody VENT Outdoor - Unibody
쮿 Forced heat dissipation via fans assembled in side panel, max. 35 W/K 쮿 IP 55 쮿 Double-walled, Al 쮿 One-piece Aluminium body 쮿 Base/plinth or panel mounting, delivery assembled
Delivery comprises (assembled)
41603055
T1
B1
t1
Item 1 2 3
Qty 1 2 1
4 5 6 7 8 9
1 1 1 4 1 1
10 11
1 1
Description Internal frame, Al Side panel, Al, RAL 7035 Front door, Al, RAL 7035, incl. handle, 3 point locking, lever handle with DIN half cylinder, door opening angle 135°, door retainer at 120°, door hinged at the left Rear panel, Al, RAL 7035 Top cover, Al, RAL 7035 Base plate with cable connection plate, Al Depth member for 19" or metric panel/slide mounts GND/earthing kit, assembled Axial fan (laterally assembled), airflow volume: 100 m3/h, 230 VAC, 50 Hz, noise level under 53 dB (A), max. pressure: 176 PA, power consumption: 35 W, connection with screw terminal block Filter mat Thermostat, complete with cable
b1
h
H
Order Information h1
25
t2
B
T 41604050 TextText
H mm 930 1100 1330
H U 16 20 25
B mm 700 700 700
T mm 500 500 500
h mm 838 1013 1238
b1 mm 536 536 536
t1 mm 400 400 400
t2 mm 350 350 350
h1 mm 736 911 1136
B1 mm 730 730 730
T1 mm 530 530 530
Height Height Width Depth qW U mm mm mm W/K 16 930 700 500 35 20 1100 700 500 35 25 1330 700 500 35 Replacement fan 230 VAC 1 piece Air filter for fan 10 pieces Base/plinth for Unibody Height 100 mm, width 700 mm, depth 500 mm, 1 piece Base/plinth for Unibody Height 200 mm, width 700 mm, depth 500 mm, 1 piece Wall mounting 1 kit
Order no. 11249-007 11249-009 11249-012 21149-185 21149-184 21249-013 21249-015 21249-017
qW = specific heat dissipation capacity
쮿 Please order base/plinth or panel mounting separately, see page 1.139 쮿 Please order panel/slide mounts separately, see page 1.143
t2 = max. 19" assembly dimension Calculation example at 35 W/K: (Value according to ETS 300019-1-4 Class 4.1) Internal temperature 50 °C, external temperature 40 °C = 10K. 350 W energy loss can be installed (35 W/K x 10K).
Electronics Packaging
www.schroff.biz
For further information www.schroff.biz/oneclick oneClick code = Order no.
UK 04/2006
1.137
Buch für druck 060321.book Seite 138 Dienstag, 21. März 2006 4:26 16
Cabinets – Outdoor - Unibody Unibody HEX Outdoor - Unibody
쮿 Forced heat dissipation via integrated heat exchanger in the door, max. 70 W/K 쮿 IP 55 쮿 Double-walled, Al 쮿 One-piece Aluminium body 쮿 Base/plinth or wall mounting, delivery assembled
Delivery comprises (assembled)
41603056
B1
T1
Item 1 2 3
Qty 1 2 1
4 5 6 7 8 9
1 1 1 4 1 1
Description Internal frame, Al Side panel, Al, RAL 7035 Front door, Al, RAL 7035, incl. handle, 3 point locking, lever handle with DIN half cylinder, opening angle 135°, door retainer at 120°, door hinged at the left Rear panel, Al, RAL 7035 Top cover, Al, RAL 7035 Base plate with cable connection plate Depth member for 19" or metric panel/slide mounts GND/earthing kit, assembled Heat exchanger 48 VDC (electronic control with alarm outputs), including temperature sensor and heater. An AC connecting cable 3m is included for the heater, with IEC Connector
Order Information b1
h1
h
H
t1
25
Height Height Width Depth qW U mm mm mm W/K 20 1100 700 600 40 25 1330 700 600 70 Base/plinth for Unibody Height 100 mm, width 700 mm, depth 600 mm, 1 piece Base/plinth for Unibody Height 200 mm, width 700 mm, depth 600 mm, 1 piece Wall mounting 1 kit
Order no. 11249-014 11249-016 21249-014 21249-016 21249-017
qW = specific heat dissipation capacity, average values
B
t2
Technical data of heat exchanger
T 41604051 TextText
H mm 1100 1330
H U 20 25
B mm 700 700
T mm 600 600
h mm 1013 1238
b1 mm 536 536
t1 mm 500 500
T2 mm 400 400
h1 mm 911 1136
t2 = max. 19" assembly dimension Calculation example at 70 W/K: (Value according to ETS 300019-1-4 Class 4.1) Internal temperature 50 °C, external temperature 40 °C = 10K. 700 W energy loss can be installed (70 W/K x 10K)
B1 mm 730 730
T1 mm 630 630
Dimensions (height x width x depth) Heater (input voltage / capacity) Specific heat dissipation capacity Fan Input voltage Airflow volume external circuit Airflow volume internal circuit Temperature range Type of protection Weight
WT 40 840 x 465 x 94 mm 230 VAC / 1000 W 40 W/K 2 pieces 48 VDC 310 m3/h 250 m3/h -40 ... 50 °C IP 55 15 kg
WT 70 1010 x 465 x 150 mm 230 VAC / 1000 W 70 W/K 2 pieces 48 VDC 510 m3/h 600 m3/h -40 ... 50 °C IP 55 21 kg
쮿 Please order base/plinth or wall mounting separately, see page 1.139 쮿 Please order panel/slide mounts separately, see page 1.143 쮿 Equipment cable (230 VAC, IEC connector), see chapter Cabinet Accessories
1.138
UK 04/2006
Electronics Packaging
www.schroff.biz
Buch für druck 060321.book Seite 139 Dienstag, 21. März 2006 4:26 16
Cabinets – Outdoor - Unibody Base/plinth for Unibody 쮿 With removable cover for cable entry
Delivery comprises H
Item 1 2
W
Qty 2 3
Description Frame, Al, U-shaped Cover / panel, Al
Order Information
W2 D2 D
41603063
Height H mm 100 100 200 200
For cabinet width mm 700 700 700 700
For cabinet depth mm 500 600 500 600
Order no. 21249-013 21249-014 21249-015 21249-016
W1
H
For further information www.schroff.biz/oneclick oneClick code = Order no.
W
W2 D3
D2
D1
41603060
Base/plinth for Unibody: width 700 mm x depth 500 mm H W W1 W2 D D1 mm mm mm mm mm mm 100 662 618 525 440 418 200 662 618 525 440 418
D2 mm 284 284
D3 mm 152 152
Base/plinth for Unibody: width 700 mm x depth 600 mm H W W1 W2 D D1 mm mm mm mm mm mm 100 662 618 525 540 518 200 662 618 525 540 518
D2 mm 384 384
D3 mm 152 152
Wall mounting for Unibody 쮿 Suitable for all Unibody standard dimensions 50 5
쮿 Cut-out for cable entry from the top
Delivery comprises
H
Item 1 2
Qty 2 1
Description Bracket Assembly kit
Order Information Description Wall mounting kit W
Order no. 21249-017
D 41603064
Electronics Packaging
www.schroff.biz
UK 04/2006
1.139
Buch für druck 060321.book Seite 140 Dienstag, 21. März 2006 4:26 16
Cabinets – Outdoor - Modular Modular VENT Outdoor - Modular
쮿 Forced heat dissipation via fans assembled in side panel, max. 35 W/K 쮿 IP 55 쮿 Double-walled, Al 쮿 Aluminium frame 쮿 Single door (for 700 mm width), double door (for 1300 mm width) 쮿 Base/plinth, delivery assembled
Delivery comprises (assembled) Item 1 2
Qty 1 2
3
1
4
1
5 6 7 8 9
1 1 4 1 1
10 11
1 1
41603051
Description Frame, bolted, Al Double-walled side panel, Al, internal raw, external RAL 7035 Front door, Al, RAL 7035, (for 700 mm width) double door (for 1300 mm width), incl. handle, 3 point locking, lever handle with DIN half cylinder, opening angle 135°, door retainer at 120°, door hinged at the left Double-walled rear panel, Al, internal raw, external RAL 7035 External top, Al, RAL 7035 Base plate with cable connection plate, Al Depth member for 19" or metric panel/slide mounts GND/earthing kit, assembled Axial fan installed on side, airflow volume: 100 m3/h, 230 VAC 50 Hz, noise level under 53 dB (A), max. pressure 176 Pa, power consumption 35 W, connection with screw terminal block Filter mat Thermostat, complete with cable
Order Information Height
41603059 TextText
H mm 1330 1510 1510
H U 25 29 29
B mm 1300 700 1300
T mm 600 600 600
h mm 1233 1408 1408
b1 mm 1136 536 1136
t1 mm 500 500 500
t2 mm 450 450 450
h1 mm 1136 1311 1311
t2 = max. 19" assembly dimension Calculation example for 35 W/K: (Values according to ETS 300019-1-4 Class 4.1) Internal temperature 50 °C, external temperature 40 °C = 10K. 350 W energy loss can be installed (35 W/K x 10K)
1.140
UK 04/2006
B1 mm 1330 730 1330
T1 mm 630 630 630
Width Depth qW
Order no.
Base/plinth Base/plinth height height 100 mm 200 mm Order no. Order no.
U mm mm mm W/K 25 1330 1300 600 35 10149-305 21149-159 21149-162 29 1510 700 600 35 10149-306 21149-157 21149-160 29 1510 1300 600 35 10149-308 21149-159 21149-162 Replacement fan 230 VAC 1 piece 21149-185 Air filter for fan 10 pieces 21149-184 qW = specific heat dissipation capacity
쮿 Please order base/plinth separately, see page 1.139 쮿 Please order panel/slide mounts separately, see page 1.143
For further information www.schroff.biz/oneclick oneClick code = Order no.
Electronics Packaging
www.schroff.biz
Buch für druck 060321.book Seite 141 Dienstag, 21. März 2006 4:26 16
Cabinets – Outdoor - Modular Modular HEX Outdoor - Modular
쮿 Forced heat dissipation via integrated heat exchanger in the door, max. 70 W/K 쮿 IP 55 쮿 Double-walled, Al 쮿 Aluminium frame 쮿 Single door (for 700 mm width), double door (for 1300 mm width) 쮿 Base/plinth, delivery assembled
Delivery comprises (assembled) Item 1 2
Qty 1 2
3
1
4
1
5 6 7 8 9
1 1 4 1 1
41603052
Description Frame, bolted, Al Double-walled side panel, Al, internal raw, external RAL 7035 Front door, Al, RAL 7035, (for 700 mm width) double door (for 1300 mm width), incl. handle, 3 point locking, lever handle with DIN half cylinder, door opening angle 135°, door retainer at 120°, door hinged at the left Double-walled rear panel, Al, internal raw, external RAL 7035 External top, Al, RAL 7035 Base plate with cable connection plate, Al Depth member for 19" or metric panel/slide mounts GND/earthing kit, assembled Heat exchanger 48 VDC (electronic control with alarm outputs), including temperature sensor and heater. An AC connecting cable 3m is included for the heater, with IEC Connector
Order Information Height U mm
Width Depth qW
mm 25 1330 1300 29 1510 700 29 1510 1300
mm 600 700 600
Order no.
Base/plinth Base/plinth height height 100 mm 200 mm Order no. Order no.
W/K 70 10149-313 21149-159 21149-162 70 10149-315 21149-158 21149-161 70 10149-316 21149-159 21149-162
qW = specific heat dissipation capacity, average value 41604052
Technical data of the heat exchanger
TextText
H mm 1330 1510 1510
H U 25 29 29
B mm 1300 700 1300
T mm 600 700 600
h mm 1233 1408 1408
b1 mm 1136 536 1136
t1 mm 500 600 500
t2 mm 350 450 350
h1 mm 1136 1311 1311
t2 = max. 19" assembly dimension Calculation example for 70 W/K: (Value according to ETS 300019-1-4 Class 4.1) Internal temperature 50 °C, external temperature 40 °C = 10K. 700 W energy loss can be installed (70 W/K x 10K)
B1 mm 1330 730 1330
T1 mm 630 730 630
Dimensions (height x width x depth) Heater (input voltage / capacity) Specific heat dissipation capacity Fan Input voltage Airflow volume external circuit Airflow volume internal circuit Temperature range Type of protection Weight
WT 70 1010 x 465 x 150 mm 230 VAC / 1000 W 70 W/K 2 pieces 48 VDC 510 m3/h 600 m3/h -40 ... 50 °C IP 55 21 kg
Note 쮿 Please order base/plinth separately, see page 1.139 쮿 Please order panel/slide mounts separately, see page 1.143 쮿 Equipment cable (230 VAC, IEC connector), see chapter Cabinet Accessories
Electronics Packaging
www.schroff.biz
UK 04/2006
1.141
Buch für druck 060321.book Seite 142 Dienstag, 21. März 2006 4:26 16
Cabinets – Outdoor - Modular Base/plinth for Modular 쮿 With removable cover for cable entry on all sides 쮿 Opening front and rear, also for transport device
Delivery comprises Item 1 2
Qty 1 4
Description Base/plinth frame welded, St, zinc-plated, RAL 7035 Cover frame, Al, RAL 7035
Order Information 41603061
Height H mm 100 100 100 200 200 200
For cabinet width mm 700 700 1300 700 700 1300
For cabinet depth mm 600 700 600 600 700 600
Order no. 21149-157 21149-158 21149-159 21149-160 21149-161 21149-162
For further information www.schroff.biz/oneclick oneClick code = Order no.
41603062
Base/plinth for Modular: width 700 mm x depth 700 mm H W W1 W2 W3 D mm mm mm mm mm mm 100 662 540 494 247 662 200 662 540 494 247 662
D1 mm 553 553
D2 mm 525 525
Base/plinth for Modular: width 700 mm x depth 600 mm H W W1 W2 W3 D mm mm mm mm mm mm 100 662 540 494 247 562 200 662 540 494 247 562
D1 mm 453 453
D2 mm 425 425
Base/plinth for Modular: width 1300 mm x depth 600 mm H W W1 W2 W3 D mm mm mm mm mm mm 100 1262 1140 1094 547 562 200 1262 1140 1094 547 562
D1 mm 453 453
D2 mm 425 425
1.142
UK 04/2006
Electronics Packaging
www.schroff.biz
Buch für druck 060321.book Seite 143 Dienstag, 21. März 2006 4:26 16
Cabinets – Outdoor - Accessories Metric panel/slide mounts Outdoor - Accessories
쮿 For mounting of metric chassis, subracks, distribution and filler panels according to IEC 60297-1 쮿 Assembled directly on the frame or on depth member for the Modular and on depth member for Unibody
Delivery comprises Item 1
Qty 2
2
1
Description Metric panel/slide mount, bolt-on for dimension 515 mm, St, 2 mm, AlZn Assembly kit, incl. GND/earthing
Order Information For cabinet height mm Partial-height mounting Partial-height mounting 930 1100 1330 1510
Usable height SU 16 21 28 35 44 51
Length mm 400 525 700 875 1100 1275
Al-Zn Order no. 24127-547 24127-682 24127-686 24127-689 24127-694 24127-697
41001548
Note 쮿 Partial height assembly only possible for Modular cabinets
19" panel/slide mounts Outdoor - Accessories
쮿 For mounting of chassis, subracks, distribution and filler panels according to IEC 60297-1 쮿 Assembled directly on the frame or on depth member for the Modular and on depth member for Unibody
Delivery comprises Item 1
Qty 2
2
1
Description 19" panel/slide mounts, bolt-on for dimension 465 mm, St, 2 mm, surface AlZn Assembly kit, incl. GND/earthing
Order Information PLA45434
For cabinet height mm Partial-height mounting Partial-height mounting 930 1100 1330 1510
Usable height U 9 12 16 20 25 29
Length mm 400 533 711 889 1111 1289
Order no. 24127-370 24127-484 24127-485 24127-487 24127-489 24127-491
Note 쮿 Partial height assembly only possible for Modular cabinets
Electronics Packaging
www.schroff.biz
UK 04/2006
1.143