1 minute read
Pipe beveling machine clamps easily, self-centres and squares
from PIM Metals Feb/March 2023
by ASTAC
Apipe beveler that is easy to operate for performing precision end preps on pipe from 114 mm I.D. to 610 mm O.D. to assure high-integrity welds has been introduced by Esco Tool of Holliston, Massachusetts, USA.
The Dictator II MILLHOG ® Pipe Beveler is an I.D. clamping welding end prep tool that aligns perfectly using self- centering clamps and can incorporate four blades in order to bevel, face, and bore or create a compound bevel. Featuring an adjustable tool post for easily indexing the blades, it can perform 37.5º to 10º compound bevels on a 610 mm O.D. pipe with a 65 mm thick wall and is offered with air, electric, and hydraulic powered motors.
Advertisement
Equipped with a patented safety spring hanger for easy positioning and clamping, the Dictator II MILLHOG ® Pipe Beveler uses one mandrel and a set of three wide clamps that provide six points of contact to the pipe I.D. to mount rigidly and ensure chatter-free operation. This machine requires no cutting oils and is well-suited for use in fabrication shops or on-site.
The Dictator II MILLHOG ® Pipe Beveler is priced from (USD) $23,995.00 and is available for rent; rental inquiries invited.
More information contact: Esco Tool
A Unit of Esco Technologies, Inc.
Matthew Brennan, International Marketing Director
75 October Hill Rd. Holliston, MA 01746
(508) 429-4441e-mail: matt@escotool.com www.escotool.com