URBAN SOLAR
SOLAR POWER
URBAN SOLAR IS A SELF POWERED LED LIGHT.
Urban solar was designed to set a new standard of durable solar-powered onroad lighting. Fast to install, easy to maintain, intelligent, durable and versatile across a broad range of urban applications.
PRODUCT DESCRIPTION • Flush-mounted • Solar-powered • Waterproof, no corrosion • High impact UV stable polycarbonate housing • Scratch resistant coating • Self-cleaning design • Built to perform in extreme conditions and temperatures
PRODUCT OPTIONS ON ROAD • On Road Solar • Smart Stud Solar
UP LIGHTS • Round Solar • Square Solar
SOLAR POWER
PRODUCT CODE: OSM
FUNCTIONALITY Light Direction
On Road Solar markers are of particular benefit in rain, fog and on corners where conventional reflective marker performance is reduced. The On Road Solar marker is powered by an internal battery and solar cell system.
LED Colours
FEATURES
• Less than 4 mm above road surface • High impact UV stable polycarbonate housing • Self-cleaning design • Integrated optics (one part housing)
Marker Shell Colour ELECTRICAL SPECIFICATION Operating Time
Full charge time Minimum charge rate Typical Light Output Life Span of LEDs (LED manufacturer spec.) Chromaticity
COMPLIANCE RoHS PRODUCT DIMENSIONS Diameter Installed Height Total Height PHYSICAL CONSTRUCTION Housing Material
Uni-Directional with 4 LEDs facing one direction Bi-Directional with 2 LEDs facing both directions Blue, Green, Red, White, Yellow (Other available on Request) Black Unit shuts down when battery voltage level falls to 90% 90% battery voltage = 3 nights with no daytime charging from 90% battery voltage = 4 hours ¼ insolation (daylight) 1000-2000mcd 100 000 h (L70F10) Blue = 460 – 463 nm Green = 520 – 523 nm Red = 620 – 625 nm White = 4000 – 4500 K (neutral) Yellow = 589 – 592 nm Yes 83mm Less than 4mm 35mm Polycarbonate certified to UL 94 V0 Highly UV Stable
ON ROAD SOLAR MARKER
SOLAR POWER
OPERATING ENVIRONMENT Ingress Protection Rating Operating Temperature Compressive Load
IP68 and IP69K -15°C to 65°C Up to 18 000kg
OPERATING CHARACTERISTICS Active De-active Response time (Start/stop)
from below ¼ insolation level from above ¼ sun intensity 10 seconds dependent on event frequency
INSTALLATION Method of Attachment PRODUCT DATA Full product code Full product name Pieces per pack Packing configuration Packs per outerbox Net weight per piece Made in New Zealand
Smart10.2 – Two Part Polyurethane adhesive OSM On Road Solar Marker 10 Horizontal 1 250g
PRODUCT CODE: SSO
FUNCTIONALITY Light Direction
Smartstud Solar LED markers are of particular benefit in rain, fog and on corners where conventional reflective marker performance is reduced. The Smartstud Solar is powered by an internal battery and solar cell system.
LED Colours
FEATURES
• Surface Mounted • High impact UV stable polycarbonate housing • Self-cleaning design • Integrated optics (one part housing)
Marker Shell Colour ELECTRICAL SPECIFICATION Operating Time
Full charge time Minimum charge rate Typical Light Output Life Span of LEDs (LED manufacturer spec.) Chromaticity
COMPLIANCE RoHS PRODUCT DIMENSIONS Diameter Installed Height Thickness
Uni-Directional with 4 LEDs facing one direction Bi-Directional with 2 LEDs facing both directions Blue, Green, Red, White, Yellow (Other available on Request) White Unit shuts down when battery voltage level falls to 90% 90% battery voltage = 3 nights with no daytime charging from 90% battery voltage = 4 hours ¼ insolation (daylight) 1000-2000mcd 100 000 h (L70F10) Blue = 460 – 463 nm Green = 520 – 523 nm Red = 620 – 625 nm White = 4000 – 4500 K (neutral) Yellow = 589 – 592 nm
OPERATING ENVIRONMENT Ingress Protection Rating Operating Temperature Compressive Load
Built to IP68 -15°C to 65°C Up to 15 000kg
OPERATING CHARACTERISTICS Active De-active Response time (Start/stop)
from below ¼ insolation level from above ¼ sun intensity 10 seconds dependent on event frequency
PHYSICAL CONSTRUCTION Housing Material INSTALLATION Method of Attachment PRODUCT DATA Full product code Full product name Pieces per pack Packing configuration Packs per outerbox Net weight per piece Made in New Zealand
Yes 121mm 21 mm (or < 12 mm with the use of Smartstud Stud Stamp) 21mm
SMARTSTUD SOLAR MARKER
SOLAR POWER
Polycarbonate certified to UL 94 V0 Highly UV Stable Smart10.2 – Two Part Polyurethane adhesive SSO Smartstud Solar 10 Horizontal 1 225g
SOLAR POWER BY 3i
ROUNDUP
LIGHT
3iINNOVATION LTD.
Unit 6, 9 Orbit Drive Albany, Auckland 0632 New Zealand
SQUAREUP
LIGHT
T. +64 (0)9 4784613 F. +64 (0)9 4782709 E. sales@3iinnovation.com