Fix: Error 0X80071AC3: The Volume Is Dirty Error
Some Windows users have reported facing the error 0x80071ac3 while connecting an external file storage system like a USB stick or a hard disk into their computer. The error 0x80071AC3 often occurs by the ReadyBoost feature, it makes your operating system can’t access files due to bad sectors on the hard disk or external hardware. The error code 0x80071AC3 can also appear up due to faulty device drivers or incomplete. If you are using an old external drive, you’ll get error messages ‘Volume is dirty‘. So in this tutorial, I will share a few solutions to solved this error.
SOLUTION 1: DISABLE READYBOOST DISK CACHING FEATURE You should be able to fix this error code 0x80071ac3 by disabling ReadyBoost disk caching feature. To do that, follow these steps:
Step 1. Go to My computer.
Step 2. Then, you right click on the external USB flash drive and click Properties.
Step 3. Move on, you select the ReadyBoost tab and select “Do not use this device” then accept the changes.
SOLUTION 2: USE COMMAND PROMPT You can solve error 0x80071ac3 by using Command Prompt. To do that, follow these steps:
Step 1. Open administrative Command Prompt. To do that, rightclick Start button, select Command Prompt (Admin).
Step 2. Then, you type chkdsk x: /B and hit Enter.
Step 3. Wait until the process completely then restart your system
SOLUTION 3: USE DIAGNOSTIC You can fix this error code 0x80071ac3 by using Diagnostic
Step 1. First of all, your download and install the Diagnostic.
Step 2. Next, you run full scan.
Step 3. Finally, perform system clean-up and repair.
SOLUTION 4: USE CHECK DISK TOOL You can also try to use the check disk tool to fix error code 0x80071ac3. To do that, follow these steps:
Step 1. Go to My computer.
Step 2. Then, you right click on the disk drive that is causing errors and click Properties.
Step 3. Next, you select the tools tab and click on check.
Step 4. Now, you click on the option to scan your drive
SOLUTION 5: USING REGISTRY EDITOR One of the recommended methods is to allow for writing to the drive from the registry. To do that, follow these steps:
Step 1. You press Windows key + R then type regedit and hit Enter to open Registry Editor.
Step 2. Next, you locate following sub-key:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\StorageDevicePo licies
Step 3. Then double click “WriteProtect” string, you set its value to 0.
Step 4. Click OK and exit Registry Editor. Then restart your computer.
These are 7 solutions that should definitely fix the error 0X80071AC3. If you have any other Windows related errors you can check for the solution in my Windows fix section. Thank you reading this tutorial.
Source: https://windowsfreeapps.com/error-0x80071ac3-the-volume-is-dirtyissue-fix