Titusville
Titusville, FL 800.756.0399 woodgraindistribution.com
Titusville
Table of Contents Why Do Business with Woodgrain?..........................................................................................2 Commitment to the Environment..............................................................................................2 Woodgrain Brands ....................................................................................................................3
1450 Shepard Drive Titusville, FL 32780 p: 800.756.0399 321.385.3880 f: 321.385.3820
Ceiling: Pages 4-5 Crown Moulding........................................................................................................................4-5 Cove Mould...............................................................................................................................5 Door & Window: Pages 6-8 Casing.......................................................................................................................................6-7 Stop...........................................................................................................................................7 Window Stool............................................................................................................................7 Mull............................................................................................................................................8 Brick Mould...............................................................................................................................8 Back Band.................................................................................................................................8 Wall: Page 9 Chair Rail/Panel Mould..............................................................................................................9 Chair Rail Backer ......................................................................................................................9 Outside Corner .........................................................................................................................9 Floor: Pages 10-12 Base..........................................................................................................................................10-11 Base Shoe ................................................................................................................................12 Base Cap ..................................................................................................................................12 General Purpose: Pages 13-14 Picture Mould............................................................................................................................13 Lattice .......................................................................................................................................13 Handrail ....................................................................................................................................13 Half Round ...............................................................................................................................13 Shingle ......................................................................................................................................13 Apron.........................................................................................................................................13 Screen ......................................................................................................................................13 Joint Mould ...............................................................................................................................14 Round .......................................................................................................................................14 Quarter Round ..........................................................................................................................14 Cap Mould ................................................................................................................................14 Chamfer ....................................................................................................................................14 S-4-S Stock ..............................................................................................................................14 Boards: Page 15 S-4-S Boards.............................................................................................................................15
Montevallo, AL 80 South Shelby Street Montevallo, AL 35115 p: 800.756.0199 205.665.2546 f: 205.665.3432
Hoffman, NC 2772 Highway 1 North P.O. Box 188 Hoffman, NC 28347 p: 800.756.0299 910.281.3116 f: 910.281.5820
Titusville, FL 1450 Shepard Drive Titusville, FL 32780 p: 800.756.0399 321.385.3880 f: 321.385.3820
Shepherdsville, KY 1272 Omega Parkway Shepherdsville, KY 40165 p: 800.756.0599 502.543.9191 f: 502.543.9192
Phoenix, AZ 229 South 49th Avenue Phoenix, AZ 85043 p: 800.756.0799 602.272.2788 f: 602.272.2662
Atlanta, GA 6280 Best Friend Road Suite 400 Norcross, GA 30071 p: 866.915.8938 770.248.3021 f: 770.248.3028
Houston, TX 4343 Kennedy Commerce Drive Houston, TX 77032 p: 800.756.0499 f: 855.211.5712
Door Shop: Page 16 Flat Jamb ..................................................................................................................................16 Split Jamb ................................................................................................................................16 Stop Set ...................................................................................................................................16 Exterior Frame ..........................................................................................................................16 Casing Legs ..............................................................................................................................17 Stop Legs .................................................................................................................................17 Return & Cancellation Policy ....................................................................................................18 Installation & Finishing ..............................................................................................................19
1
Why do Business with Woodgrain?
Woodgrain Brands
Woodgrain Distribution is a logistics company dedicated to delivering “best in class” service and millwork products to our customers at the lowest total cost of ownership, when they want it, and where they want it. The Woodgrain organization has over 55 years of experience in millwork supply. This experience along with the investments made in technology, talent, training, facilities, and network volume density allow customers to receive efficient, reliable, and consistent value from Woodgrain Distribution.
DecraMold®
The Woodgrain Distribution product sourcing strategy using our own international and domestic mills as well as contractual relationships with suppliers around the world, gives our customers security of supply as well as variable lead time options. Our goal is to provide customized solutions for the product mix and service options our customers are looking for at the lowest total cost of ownership.
Woodgrain’s Commitment to the Environment In its total commitment to customers, Woodgrain Distribution promises “best in class” products and service at the lowest total cost of ownership. In its total commitment to the environment, Woodgrain promises to act as a responsible corporate citizen, optimizing the use of resources and producing products that not only have a positive impact on the environment, but also the health of people. The wood used by Woodgrain primarily originates from sustainable sources including FSC/SFI certified wood. Over 99 percent of the wood fiber processed by Woodgrain is used as a product. Woodgrain recycles every product possible and strives to operate in an environmentally conscience manner.
Add beauty and interest to any room with DecraMold®. DecraMold includes a complete line of decorative moulding for any room or project; base, fluted casing, chair rail, crown, general purpose, and door and cabinet trim. DecraMold is available in random and eight foot lengths allowing for endless possibilities. DecraMold installs the same as traditional moulding, and is made from solid pine which can be finished with paint, stain, or varnish.
BlockShop® An assortment of corner and divider blocks, rosettes, and plinth blocks create the “nomiter system®,” BlockShop® which can be used with any traditional moulding as well as DecraMold. BlockShop offers a complete selection of blocks for no-miter installation of base, casing, chair rail, and crown mouldings in a variety of sizes and profiles. The blocks eliminate the need for difficult miter cuts, allow for a quick and easy installation at an affordable price, and add elegance to your home. To carry the finished look of your moulding, blocks can be painted, stained, or varnished. ®
Flexgrain®, flexible moulding provides an inexpensive and ideal solution for all your curved moulding needs. All Woodgrain profiles are available for any pre-formed or straight applications. For concave, convex, curved windows, doors, and arches; Flexgrain has pre-formed half circles, quarter circles, full circles, ovals, eyebrows, and ellipticals available. For curved wall applications, install Flexgrain flat to the wall and it will follow the bend. Flexgrain can be painted or stained and is available smooth or in any wood grain pattern. Looking to replicate a historic or unique piece of moulding? Flexgrain has the capability to manufacture custom mouldings to fit your needs. Send a sample of your historic or unique moulding which Flexgrain will use to create a mould and manufacture the needed material. Flexgrain saves you time and money versus the alternative of bending traditional wood moulding.
2
3
PFJ = Raw Fingerjoint Pine PFP = Primed Fingerjoint Pine PNE = Solid Pine PTP = Pressure Treated Pine
Ceiling
UMD = Light MDF* OAK = Solid Oak MFW = Banak
PVC = Extruded Cellular Vinyl TIM = Timbron Composite Mouldings FLEX = Flexgrain® Flexible Moulding
*UMD thickness is measured in metric units
Crown Moulding
No. F814 1” X 8-1/4” PFP, FLEX
No. F714 11/16” X 7-1/4” PFP, FLEX
No. TPCW 18mm (5/8”) X 7-1/8” UMD, FLEX
No. F514 9/16” X 5-1/4” PFP, FLEX (Wide Cove)
No. 45 9/16” (15mm) X 5-1/4” PFP, PNE, UMD, FLEX (Narrow Cove)
No. 1868 15mm (9/16”) X 5” UMD, FLEX
No. F614 11/16” X 6-1/4” PFP, FLEX
No. 52 9/16” (15mm) X 2-3/4” PFP, PNE, UMD, FLEX
No. 54 9/16” X 2-1/4” PFP, FLEX
No. 75 9/16” X 1-5/8” PFP, PNE, FLEX
No. 61 9/16” X 1-5/8” PNE, FLEX
No. 47 9/16” (15mm) X 4-5/8” PFP, UMD, FLEX
Cove Mould
No. 48 9/16” X 4-1/4” PFP, PNE, FLEX
4
No. 3194 11/16” X 4-1/4” PFP, FLEX
No. SPDN 11/16” X 4-1/4” PFJ, FLEX
No. 49 9/16” (15mm) X 3-5/8” PFP, PNE, UMD, TIM, FLEX
No. 86 9/16” X 1-5/8” PFP, PNE, FLEX
No. 100 11/16” X 11/16” PNE, FLEX
5
PFJ = Raw Fingerjoint Pine PFP = Primed Fingerjoint Pine PNE = Solid Pine PTP = Pressure Treated Pine
Door & Window
UMD = Light MDF* OAK = Solid Oak MFW = Banak
PVC = Extruded Cellular Vinyl TIM = Timbron Composite Mouldings FLEX = Flexgrain® Flexible Moulding
*UMD thickness is measured in metric units
Casing
No. 356 11/16” (15mm) X 2-1/4” PFJ, PFP, PNE, UMD, TIM, FLEX
No. 366 11/16” (15mm) X 2-1/4” PFJ, PFP, PNE, UMD, FLEX
No. 376 11/16” X 2-1/4” PFP, FLEX
No. 316 11/16” X 2-1/4” PFP, PNE, PTP, FLEX
No. 1002 9/16” (12mm) X 3-9/16” PFP, PNE, UMD, FLEX
No. 1006 9/16” X 3-9/16” PFP, FLEX
No. M015 11/16” X 3-1/2” PFP, FLEX
No. RB03 1-1/16” (25mm) X 3-1/2” PFP, PNE, UMD, FLEX
Stop No. 327 11/16” X 2-1/4” PFP, PNE, FLEX
No. 442 11/16” X 2-1/4” PFP, FLEX
No. M010 11/16” X 2-1/4” PFP, FLEX
No. 1803 11/16” X 2-1/4” PFP, FLEX
No. 856 3/8” X 1-3/8” PNE, FLEX
No. 473 9/16” X 2-1/4” PNE, FLEX
No. 387 5/8” X 2-1/4” PNE, FLEX
No. A462 11/16” X 2-3/4” PFJ, FLEX
No. 887 3/8” X 1-1/4” PFP, PNE, FLEX
No. 916 3/8” X 1-3/8” PFP, PNE, FLEX
No. 937 7/16” X 1-1/4” PNE, FLEX
No. 941 7/16” X 3/4” PNE, FLEX
No. 445 11/16” X 3-1/4” PFP, PNE, FLEX
Window Stool
7/8” No. 1021 11/16” X 5-1/4” PFP No. 444M 5/8” X 3-1/4” PFJ, FLEX
6
No. 1800 (1000m) 9/16” X 3-1/4” PFP, FLEX
No. 1830 11/16” X 3-1/2” PFP, FLEX
No. 1195 11/16” X 2-1/2” PNE
No. 1682 5/8” X 3-1/4” (Reversible) PFP, FLEX 7
PFJ = Raw Fingerjoint Pine PFP = Primed Fingerjoint Pine PNE = Solid Pine PTP = Pressure Treated Pine
Door & Window
Wall
Mull
Chair Rail/Panel Mould
UMD = Light MDF* OAK = Solid Oak MFW = Banak
PVC = Extruded Cellular Vinyl TIM = Timbron Composite Mouldings FLEX = Flexgrain® Flexible Moulding
*UMD thickness is measured in metric units
1/4” 1”
No. 988 3/8” X 1-3/8” PNE, FLEX
No. 987 3/8” X 2” PNE, FLEX
Brick Mould
No. 985 1/2” X 2-1/4” PNE, FLEX
No. 1219 11/16” X 1-5/8” PNE, FLEX
No. CR99 1-1/8” X 2-1/4” PNE, FLEX
No. 392 1” X 2-3/8” PFP, PNE, FLEX
No. 1218 5/8” X 2-1/2” PNE, FLEX
No. 390 11/16” (15mm) X 2-5/8” PFJ, PFP, PNE, UMD, FLEX
No. 300 1-1/16” X 2-3/4” PFJ, FLEX
No. 302H 1-1/16” X 2-3/4” PFJ, FLEX
Back Band
1/4” 5/8” No. 176 5/8” X 1-5/8” PFP, PVC
No. 1217 1/2” X 1-1/2” PNE, FLEX
No. 180 1-3/16” X 2” PFP, PVC
No. 281 11/16” X 1-1/8” PNE, FLEX
1/4” 11/16”
No. 280 11/16” X 1-1/16” PFP, FLEX
No. 297 5/8” X 3” PFJ, PNE, FLEX
Chair Rail Backer
No. 304H 9/16” X 4-1/4” PFJ, FLEX
8
Outside Corner
No. 206 11/16” X 11/16” PNE, FLEX
No. 205 1-1/8” X 1-1/8” PNE, FLEX
No. 204 1-5/16” X 1-5/16” PNE, FLEX
9
PFJ = Raw Fingerjoint Pine PFP = Primed Fingerjoint Pine PNE = Solid Pine PTP = Pressure Treated Pine
Floor
UMD = Light MDF* OAK = Solid Oak MFW = Banak
PVC = Extruded Cellular Vinyl TIM = Timbron Composite Mouldings FLEX = Flexgrain® Flexible Moulding
*UMD thickness is measured in metric units
Base
No. T738 15mm (11/16”) X 7-3/8” UMD, FLEX
No. F725 11/16” X 7-1/4” PFP, FLEX
No. 1867 15mm (11/16”) X 7-1/4” UMD, FLEX
No. 6140 11/16” X 6-1/4” PFP, FLEX
No. 5163 9/16” X 5-1/4” PFP, PNE, FLEX
No. 5180 9/16” (12mm) X 5-1/4” PFP, PNE, UMD, FLEX
No. 1692 17/32” X 5-1/4” PFP, FLEX
10
No. 618 9/16” (12mm) X 5-1/4” PFJ, PFP, PNE, UMD, FLEX
No. 620 9/16” X 4-1/4” PFP, PNE, FLEX
No. 6180 11/16” X 6-5/16” PFP, FLEX
No. 1866 15mm (11/16”) X 5-1/4” UMD, FLEX
No. 623 9/16” (12mm) X 3-1/4” PFP, PNE, UMD, TIM, FLEX
No. BAV1 15mm (11/16”) X 5-1/4” UMD, FLEX
No. 1652 9/16” X 5-1/8” PFP, FLEX
No. 750 9/16” X 4-1/4” PFJ, FLEX
No. M151 9/16” X 4-1/4” PFJ, FLEX
No. 631 9/16” (12mm) X 3-1/4” PFP, PNE, UMD, FLEX
No. 713 9/16” (12mm) X 3-1/4” PFP, PNE, UMD, FLEX
No. 433 9/16” X 3-1/4 PFJ, FLEX
No. 723 7/16” X 3-1/4” PFJ, FLEX
No. 726 7/16” X 2-1/4” PFP, FLEX
11
PFJ = Raw Fingerjoint Pine PFP = Primed Fingerjoint Pine PNE = Solid Pine PTP = Pressure Treated Pine
Floor
General Purpose
Base Shoe
Picture Mould
No. 127 7/16” X 3/4” OAK, TIM, FLEX
No. 129 7/16” X 11/16” PFP, PNE, FLEX
No. 272 11/16” X 1-5/8” PNE, FLEX
UMD = Light MDF* OAK = Solid Oak MFW = Banak
PVC = Extruded Cellular Vinyl TIM = Timbron Composite Mouldings FLEX = Flexgrain® Flexible Moulding
*UMD thickness is measured in metric units
Lattice
No. 273 11/16” X 1-3/4” PFP, FLEX
Handrail
No. 267 1/4” X 1-5/16” PNE, FLEX
No. 266 1/4” X 1-1/2” PNE, FLEX
Half Round
Base Cap No. 231 1-1/2” X 1-11/16” PNE
No. 1207 11/16” X 7/8” PNE, FLEX
No. 1201 11/16” X 1-1/4” PNE, FLEX
No. 166 11/16” X 1-1/4” PNE, FLEX
No. 1203 1-1/4” X 2-1/4” PNE
No. 122 3/8” X 11/16” PNE, FLEX
No. 120 1/2” X 1” PNE, FLEX
No. 163 11/16” X 1-3/8” PFP, PNE, FLEX No. 116 11/16” X 1-1/2” PNE, FLEX
12
Shingle
Apron
Screen
No. 210 5/8” X 1-5/8” PFP, FLEX
No. B200 11/16” X 2-1/2” PFJ, FLEX
No. 142 1/4” X 3/4” PNE, FLEX
No. 144 1/4” X 3/4” PNE, FLEX
13
General Purpose
Boards
Round
Joint Mould
No. 233 1-1/4” PNE
No. 1215 9/16” X 1-1/4” PNE, FLEX
PFJ = Raw Fingerjoint Pine PFP = Primed Fingerjoint Pine PNE = Solid Pine PTP = Pressure Treated Pine
UMD = Light MDF* OAK = Solid Oak MFW = Banak
PVC = Extruded Cellular Vinyl TIM = Timbron Composite Mouldings FLEX = Flexgrain® Flexible Moulding
*UMD thickness is measured in metric units
S-4-S Boards
No. 232 1-7/16” PNE
1 X 2 3/4” X 1-1/2” PFP, FLEX
1x4 3/4” (18mm) X 3-1/2” PFP, UMD, FLEX
1x4 11/16” X 3-1/2” PFJ
Quarter Round
No. 108 1/2” X 1/2” PNE, FLEX
No. 106 11/16” X 11/16” PFP, PNE, FLEX
No. 105 3/4” X 3/4” TIM, FLEX
Cap Mould
No. 103 1-1/16” X 1-1/16” PNE, FLEX
Chamfer
1/4”
1x6 3/4” (18mm) X 5-1/2” PFP, UMD, FLEX
1x6 11/16” X 5-1/2” PFJ
1 x 10 3/4” X 9-1/4” PFP, FLEX
1 x 10 11/16” X 9-1/4” PFJ
1x8 3/4” (18mm) X 7-1/4” PFP, UMD, FLEX
1x8 11/16” X 7-1/4” PFJ
1/4” 3/4”
3/4”
No. 292 9/16” X 1-1/8” PNE, FLEX
No. 995 3/4” X 3/4” MFW, FLEX
No. 289 1-1/16” X 1-5/8” PNE, FLEX
S-4-S Stock
No. 254 1/2” X 3/4” PNE, FLEX
14
No. 239 3/4” X 3/4” PNE, FLEX
No. 249 11/16” X 1-1/2” (Eased Edge) PNE, FLEX
No. 1220 7/16” X 2” (Eased Edge) PNE, FLEX
No. 1250 7/16” X 2-1/2” (Eased Edge) PNE, FLEX
1 x 12 3/4” (18mm) X 11-1/4” PFP, UMD, FLEX
1 x 12 11/16” X 11-1/4” PFJ
15
PFJ = Raw Fingerjoint Pine PFP = Primed Fingerjoint Pine PNE = Solid Pine PTP = Pressure Treated Pine
Door Shop Flat Jamb
11/16” X 4-5/8” 81” BD 81-11/16” OAL PFP
UMD = Light MDF* OAK = Solid Oak MFW = Banak
PVC = Extruded Cellular Vinyl TIM = Timbron Composite Mouldings FLEX = Flexgrain® Flexible Moulding
*UMD thickness is measured in metric units
Casing Legs
11/16” X 4-5/8” 97” BD 97-11/16” OAL PFP
11/16” X 5-1/4” 81” BD 81-11/16” OAL PFJ
No. 316 7/0 11/16” X 2-1/4” PFP, PNE
No. 327 7/0 11/16” X 2-1/4” PFP
No. 356 7/0 11/16” X 2-1/4” PFP
No. 366 7/0 11/16” X 2-1/4” PFJ, PFP, PNE
Split Jamb Stop Legs
1-1/16” X (4-9/16” to 5-1/4”) 80-5/8” BD Male = 2-3/4” PFP
Stop Set
1-1/16” X (4-9/16” to 5-1/2”) 97” BD Male = 2-1/2” PFP
No. 887 7/0 and 8/6 3/8” x 1-1/4” PFP
No. 916 7/0 3/8” X 1-3/8” PFP
No. SS3 7/16” X 1-5/8” X 84” 2 = 7/0 Legs 1 = 3/0 Header Weatherstrip Applied PFP
Exterior Frame
1-1/4” X 4-9/16 X 6’8” PFP 16
17
Return & Cancellation Policy
Installation & Finishing
PURPOSE To better service our customers, Woodgrain Distribution has developed the following sales policies. We trust you find these policies fair in order to protect Woodgrain Distribution and our customers. We shall strive in every facet of our business to merit the privilege of serving you and your continued support.
INSTALLATION The installation of moulding starts with having the right tools. The following are the most common tools needed for a safe installation of moulding: •
Miter Box, Miter Saw, or Compound Miter Saw
•
Protractor
•
Finishing Nails, Nail Set, and a Hammer or Brad Nailer
•
Pen and Paper
•
Wood putty and glue
•
Utility Knife
•
Tape Measure
•
Ladder
•
Coping Saw
•
Safety Glasses
CANCELLATION Special run, non-stock or special ordered items cannot be cancelled once the order is in process.
•
Framing Square
•
Hearing Protection
CLAIMS FOR LOSS OR DAMAGED & DEFECTIVE MERCHANDISE Woodgrain Distribution’s responsibility for loss or damaged merchandise is limited to Woodgrain Distribution fleet only, and does not cover items shipped via common carriers.
Start by measuring the length of each wall and be sure to subtract any doors, windows, or openings. Add 10% to each wall to allow for mistakes. This will provide the amount of moulding needed for the project. It is also helpful to sketch the room noting dimensions and corners.
All claims must be filed within five (5) days after receipt of goods. All phone calls for shortages must be followed by a faxed hard copy.
After purchasing the moulding, determine which piece and wall to start with. Identify what miter cuts will need to be made along with any splicing that may be required. When measuring a piece of moulding which will be mitered, add the width of the moulding to the measurement to allow for the miter cut.
SERVICE IN GENERAL Pricing — all published prices are subject to change without notice. Regular Orders — all orders are phoned or faxed to our sales department. All orders are subject to final acceptance by Woodgrain Distribution credit department. Special Orders — Woodgrain Distribution will require a written purchase order for special run, non-stock and special ordered items. Orders for such will be held until receipt of customers written order.
Damage claims must be accompanied by a written statement, Woodgrain Distribution will not be liable for any unacknowledged shortages, damages or claims submitted beyond the stated five (5) day period. RETURN OF MERCHANDISE Only with manufacturer’s approval can any item be returned. Items must be in resalable condition with appropriate invoice or purchase order number that must be provided to us at time of request. If the return is a result of an error by Woodgrain Distribution, there will be no handling or restocking charge. Credit for special run, non-stocked and special ordered items will be subject to a 35% restocking charge (credited at 65% of original invoiced cost). Credit for all other items will be subject to a 20% restocking charge (credited at 80% of original invoiced cost) which will be determined by our management. Items installed, painted or altered can not be returned. Returns are limited to items purchased within the last 60 days.
General Information
Before installing moulding, allow material to acclimate to indoor environment for a period of one week. Store all material indoors, in a clean, dry place. GRADE Wood mouldings are available in two grades. “Stain Grade” is intended for natural or clear finish and the exposed face must be of one single piece. “Paint Grade” is intended for opaque paint finishes or overlays and can be finger jointed and/or edge glued. These grades may have a few minor characteristics such as light checks, small pitch pockets, light torn grain, occasional medium stain or a small amount of medium pitch. A serious combination of these is not admissible in any one piece. The number and extent of characteristics permitted varies as the area of the piece increases or diminishes.
Nail the moulding in place with finishing nails leaving the corners to nail at the end once all the moulding is installed. Install the moulding around the entire room and go back to nail the corners. If the moulding ends without running into a wall create a return. A return can be created from a scrap piece of moulding. Cut the proper angle on the one end of the moulding and a 90 degree angle on the other end forming a small triangular piece of moulding. Attach the piece with wood glue and tape until the glue dries. Useful tips and definitions Mitering: A basic operation in which an angle is cut across the moulding using a miter box and saw or a compound miter saw. Inside and outside corners, and moulding around windows and doors are usually cut at a 45 degree angle. Coping: Coping is another technique used when butting one moulding against the profile of another. First, set the moulding in the miter box as it is to be installed on the wall – upright against the back plate. Cut the end of the moulding at a 45 degree angle. This cut exposes the profile of the moulding. Following the profile, cut with a coping saw at a 90 degree angle with the face of the moulding. This results in a duplication of the profile pattern which fits over the face of the adjoining moulding. Splice/Scarf: In order to install moulding over large spans, you may have to splice two lengths of moulding together. The moulding is spliced with a vertical seam by placing the two pieces of moulding in the miter box as they will be installed, and mitering them at a 45 degree angle. Gluing the joint before nailing the moulding into place will strengthen the joint. Finishing We recommend staining or painting the moulding before it is installed. Fill any nail holes, repair scratches, dents, or damage by sanding the area and using non-shrinking filler. Allow the filler to dry and lightly sand these areas to remove any rough spots. The stain or paint may need to be touched up once the moulding has been installed. Be sure to protect the area around the moulding by taping it off.
STAIN GRADE (suitable for natural, stain, paint, or enamel finish) On the basis of net 2” face — 12’ long this grade will admit the following characteristics or their equivalent. a. A small spot of torn grain, one foot of medium pitch, light skip in dressing on back, or b. One small and one very small pitch pocket, or c. One short tight season check and a light snipe at one end, or d. Medium stain in occasional (10%) pieces for one third the area in an otherwise perfect piece. Characteristics that will not show when piece is laid shall not be given the same consideration as characteristics elsewhere. PAINT GRADE (paint or overlay grade) The same quality as Stain Grade except stain is no defect. Glue joints (laminated or finger joints) must be precision machined and assembled with tight joints. Patching, filling or plugging is permitted to provide a paintable surface. LENGTHS Random lengths can be 6 to 16 feet in multiples of one foot. Not over 15% of any one item shall be under 8 feet. When computing the percentage of shorts in casing, brick mould and stops, pieces 7’ in length will be considered long lengths. Specified lengths for cut-to-length window and door trim shall be graded as completely useable. Finger and/or laminated jointed mouldings may be ordered in specified lengths with not over 15% trim backs permitted in any one item. MANUFACTURING TOLERANCES Thickness and width + or - 1/32”.
18
19
Notes
woodgraindistribution.com
Cert no. SGSNA-COC-003369