25 minute read
Paint by Number
by WorkBoat
Longevity and fl exibility are key with marine coatings.
By Michael Crowley, Correspondent
Want something different for your steel workboat? How about a marine paint whose effective lifetime is measured in decades and not a few years? Two to three decades, 20 to 30 years, is what Jotun says you get with the Jotacote Universal S120 epoxy. It will be introduced this December at the International WorkBoat Show in New Orleans.
This is a solvent-free epoxy coating rst unveiled four years ago in Europe and South Korea after 13 years of research and development. Jotun’s S120 epoxy can be used as a one-coat system, or as a primer for regular paints and antifoulants.
The key to its longevity, adhesiveness and exibility is its patented Covallox technology that uses covalent bonds instead of relying on hydrogen bonds to adhere the coating to steel plating.
“This gives a double locking mechanism,” said Steven Feldman, Jotun’s director of business development, “where you still have hydrogen bonds you now have covalent bonds, which is a chemical bond 10 times stronger than the typical hydrogen bonds.” With a coating dependent solely on hydrogen bonds when the coating is damaged down to the steel there will be undercutting and “the rust starts creeping under the coating and lifts it.”
With the Jotacote Universal S120 epoxy there will be rust where the steel is exposed “but the creeping of the rust underneath the epoxy is stopped almost entirely from breaking the bond and going any further,” Feldman said.
The next obvious advantage of a paint that lasts 20 years, said Feldman, is the labor, paint and money it saves. How much? “Quite a lot,” he said. Also, being solvent free, the Jotacote Universal S120 epoxy is safe for use in a shipyard by those applying the coating and “substantially reduces re potential.”
An offshore supply vessel is drydocked to receive Carboline coatings.
The S120 epoxy is applied the same way any epoxy is applied — by brush, roller or sprayed on — and when used as a primer accepts most topcoats.
Currently the Jotacote Universal S120 is available in gray and buff colors. The latter being a light-sand color
COVAL
The paint company Coval, after a change of ownership in 2020, relaunched its marine coatings products this past June. Coval Marine & Hull Coat is a “single component, thin lmed clear coat,” bottom paint with “no pesticides or heavy metals,” said Coval’s Jason Dixon. It’s naturally anticorrosion and anti-fouling and “works through a very slick surface that marine life can not attach to” by creating nanosized particles that crosslink with the hull, thus decreasing drag and preventing marine growth.
Hull Coat is designed for surfaces below the water line and can be applied to aluminum, steel, and berglass gelcoated hulls but not to wood. Only one coat is required if applied properly.
Seeking to expand its applications, Coval is teaming with the Port of San Diego, whose waters have been found to have levels of copper exceeding the 3.1 mg/L limit permitted under the Clean Water Act, to see how well Hull Coat “encapsulates copper-based paint,” and prevents the copper from leaking into the water, said Dixon. The Port of San Diego’s goal, according to the American Coatings Association, is to bring the harbor into regulatory compliance for copper by 2022.
Hull Coat is marketed as an anticorrosion, antifoulant paint but not yet as one that prevents copper leakage, pending tests in the Port of San Diego.
Coval
Coval Marine & Hull Coat can be sprayed or brushed on to bare metal or painted surfaces. It is fast drying and only requires one thin coat.
POLYSILOXANE COATINGS
Low Solar Absorption
Booth 230
MIL-PRF-24635E, Type V SiloxoShield® Single Component Polysiloxane Topcoat
MIL-PRF-24667C Type I, IV, V & X Comp G SiloxoGrip® Polysiloxane Nonskid/Nonslip
Booth 218
NCP’s SiloxShield® and SiloxoGrip® polysiloxane coatings are engieered for • increased weather resistance • lowered surface temperatures
Formulated and tested with NRL
Your Partner In Coatings Since 1948 Your Partner In Coatings Since 1948 ISO 9001:2015 Certified
www.ncpcoatings.com
Coval will be taking its marine coatings lineup to the WorkBoat Show in December.
CARBOLINE
Carboline has introduced two new coatings since mid-2020. The rst, Rustbond PS, is a low-VOC primer that came out in December 2020. It’s a major upgrade of Carboline’s earlier Rustbond coating that’s been available for many years. Rustbond PS utilizes an advanced resin technology that allows a topcoat to be applied faster and cure faster at lower temperatures. “It cures down to 35 degrees Fahrenheit,” said Gus Badalamenti of Carboline.
Rustbond PS was designed for vessel owners who need to be able to apply a topcoat the same day as the sealer. The fast drying Rustbone PS primer allows them to do that, especially when having
now.cumminsfiltration.com/marine
Sea Pro® FH240 Series
All-In-One Fuel Filter, Fuel/Water Separator is set to revolutionize the marine industry
Features & Benefits Sea Pro Single Tall
• Cummins HHP marine engines ordered with the SeaPro FH240 series fuel filter will no longer require Stage 0 filtration
• Cummins Standard service interval increased to 500hrs with Extended
Service Interval Option up to 1000hrs
• SeaPro FH240 filters feature Cummins
NanoNet media technology. Customers using Cummins NanoNet® media filterscan eliminate the mid-life fuel injector service
To learn more please visit our site now.cumminsfiltration.com/marine
Sea Pro Single Tall
Sea Pro FH240 Series Duplex Tall
Sea Pro FH240 Series Duplex Tall
to work in colder temperatures. “That was a big feature,” said Badalamenti.
RustBond PS’s low-VOC formulation and penetrating properties comes in handy when there’s only a minimal amount of time and, maybe, money, to prepare surfaces beyond removing loose coatings and corrosion. “Apply the coating right over that,” said Badalamenti. “You don’t have to take it down to the bare metal.”
Rustbond PS, he said, “has really low stress. It doesn’t tend to pull on coatings, so they don’t start to lose adhesion in the future.” Thus, it can be applied over old coatings and tightly adhering rust, and prevents delamination and peeling of old coatings.
Carboline’s second new coating, Carbocoat 75, was introduced in May 2020. It’s a high-gloss alkyd nish coat that can be applied directly to metal without a primer. With corrosion inhibiting properties it can be its own self-primer for steel or aluminum plating, though in that case two coats are recommended.
SHERWIN-WILLIAMS
Normally, once the epoxy primer coat is on the hull, you have a couple of hours before applying the antifoulant coating to ensure proper adhesion between it and the primer coat. That’s a small window of opportunity, especially when operating in areas known for heat, humidity and sudden rainstorms that can affect drying times.
But now Sherwin-Williams takes some of the stress out of that job with its SeaGuard Tie Coat Epoxy, introduced last year as a primer for an antifoulant coating. Once it is on the hull, instead of a few hours, you now have four days to apply the antifoulant, said Matt Heffernan of Sherwin-Williams.
A Sherwin-Williams coating that’s been in use for over 20 years but was only introduced to the commercial marine market early this year is FastClad ER epoxy. The development of Fast-Clad ER began in the mid-1990s when Sherwin-Williams began working with the Navy to develop an ultra-high solids, single coat liner for the insides of fuel tanks, seawater ballast tanks and
A 160' fl oating drydock built by Conrad Shipyard used SherwinWilliams Fast Glad ER and SeaGuard Tie Coat Epoxy coatings.
petroleum tanks.
The Navy had been using solvent-based polyamide epoxies for tank linings with eight-year life expectancies. However, coating breakdowns often occurred within two years. The Navy’s bill for tank and void corrosion repair could be as high as $250 million a year.
Sherwin-Williams worked with the Navy to develop one of the rst military-spec ultra-high-solids linings. That eventually resulted in Fast-Clad ER, an ultra-high-solids epoxy amine coating that can be applied in a single 20- to 30-mils coat.
Fast-Clad ER’s bene ts include pit lling capabilities and high exibility to handle the stress of loading and unloading. It dries within four hours and has a “15- to 20-year service life,” said Heffernan.
Painters at Conrad Shipyard spray Sherwin-Williams SeaGuard Tie Coat Epoxy on the hull of the 160' fl oating drydock Biblia.
Introducing
+ Wind
WorkBoat + Wind is back and we’re coming to you from the Business Network For Offshore Wind’s International Partnering Forum in Richmond, VA. This digital issue is full of in-depth coverage of the event including breaking updates on the industry, from technology to policy.
Inside you will also find:
Empire Wind plans to deliver power to New York’s power grid in 2025.
Environmental review for proposed North Carolina wind energy project.
One hull instead of two may be better for U.S. offshore wind crew transfer vessels.
Download WorkBoat + Wind Vol. 3 now! >>> workboat.com/resources/wind
EMPLOYMENT
Place your ad!
Contact: Wendy Jalbert wjalbert@divcom.com
Dann Ocean Towing NOW HIRING!
As our fleet continues to grow, we are looking for experienced wire boat:
- Captain - Engineers - Mates - AB Deckhands
We Offer: A company committed to safety Competitive Day Rates Equal Time Opportunities Paid Travel
Apply online: www.dannoceantowing.com Email: hiring@dannoceantowing.com Phone: (813) 251-5100
Tugboat Captain and AB Needed!
Mobro Marine has openings for Captains and Able Bodied Seaman. Experience required for inland and offshore East Coast US, Gulf of Mexico and Caribbean. We offer excellent benefits and competitive wages to qualified applicants. Equal Opportunity Employer Located Green Cove Springs, Florida
Contact Mike Rodriguez (904) 305-2502 mrodriguez@mobromarine.com
SEEKING!!
Experienced Yacht Service Technicians
Y.E.S. is a dockside yacht service company in the Galveston Bay area. Y.E.S. represents some of the finest lines in the marine industry, such as Yanmar, Furuno, Garmin, Spectra Watermakers, Dometic air conditioning and many others.
Equal Opportunity Employer
Please forward all inquires/resumes to: laurie@yescenters.com
SHOR RE O OF FF FS SHOR RE SERVICES
Has Immediate Openings!
Derrick Barge Deck Foreman Leadermen Rigger Derrick Crane Operator Deck Crane Operator Tower Operator Welding Foreman Welder (6 GR Certified) Clerk Chief Engineer Chief Electrician Mechanic Oiler Electrician Steward Night Cook Galley Hand Tug Boat Captain Able Body Seamen QMED/OILER
VANUATU FLAGGED TUG CREWS:
Able seafarer deck–II/4 or II/5 Chief engineer—III/3 Able seafarer engine—III/4 or III/5
All deck officers must hold valid Vanuatu GMDSS– General Operator’s Certificate (GOC) (IV/2)
Minimum 2 years offshore experience onboard a derrick barge required. Applicants must have a valid TWIC card. Email resume to: jobs@shoreoffshore.com
OPEN POSITIONS!
• Steel Supervisor • Outside Machinist • Marine Electrician • Dockmaster • Riggers • Forklift Operator • Crane Operator • Tank Labor • Paint Labor • Outside Mechanic • Electrician • Shipyard
Maintenance
Mechanic
We Offer Competitive Salaries Equal Opportunity Employer
www.bayonnedrydock.com
Please forward all inquires/resumes to: HR@Bayonnedrydock.com
Advertising Contact:
Wendy Jalbert wjalbert@divcom.com
HIRING
LICENSED ENGINEERS
Must be an experienced skilled crewmember on board the vessel’s engineering department. Responsible for the proper operation and maintenance of all mechanical equipment on the boat. We currently have openings in New York and
Virginia.
We are an Equal Opportunity Employer
For Job description and to apply online go to:
https://mcallister.balancetrak.com/ LicensedEngineer
EMPLOYMENT
LEGAL
MARINE GEAR SUPPLIES
220 Ton Mobile Boat Hoist
Marine Travelift brand; model 200 CII upsized from standard 32’x30’ model to 34’ inside clear height x 34’ inside clear width, max 30’ vessel width Bought new in 2009, in excellent operating condition Gulf Coast area $595,000 USD As is where is Buyer arrange and pay for relocation. For purchase inquiries contact: Mbhoist220@gmail.com
EMPLOYMENT
Now Manufacturing and Installing Fire Retardant Bunk Curtains We are a Custom Manufacturer of Wheelhouse Tinted Shades & Crew Quarter Blackout Shades
We custom build every shade to fit each window in our facility.
They are Incredibly durable, driven by over-sized clutches and operated by a stainless steel pull chain. We offer measurement and installation services in Southern Louisiana, Mississippi and Alabama. We carry $5,000,000 workers’ compensation, and liability insurance policies with U.S.L.&H. and the Jones Act.
Download our order form to purchase your shades today.
Contact: Edward Kass III | 504-615-5833 | ekass@solarboatshades.com | www.solarboatshades.com
International WorkBoat Show - Booth #548
Approved
NOW AVAILABLE - MARINE FAST REPAIR KITS!
MARINE REPAIR KITS 1-4
Used onboard vessels to perform a wide range of repairs to leaking pipes, tanks, pumps, and process equipment
MARINE REPAIR KITS A&B
Epoxy resin and GRP/glass fiber-based repair kits to encapsulate and seal problem pipework onboard vessels
603 LIFEBOAT REPAIR KIT
Provides long term waterproof repairs to GRP/ glass fiber surfaces
IN STOCK IN TAMPA , FLORIDA - FIND T M ON WWW . U - COAT . CO
SEEKING
Oilers & Jr. Engineers
The Alaska DOT&PF, Alaska Marine Highway System (AMHS) is recruiting for individuals interested in full-time year round positions in our engineering department. If you love working in a hands-on marine environment working with AMHS as an Oiler or Jr. Engineer, you’ll be responsible for the maintenance and operation of a variety of mechanical equipment, which includes the main propulsion and electrical generation units on board a marine highway vessel.
Questions or applications can be emailed to: dot.amhs.dispatch@alaska.gov
For a full job description, minimum qualifications and benefits check out the full job listings at: https://dot.alaska.gov/amhs/doc/ recruit_flyer_oiler_jr_engineer.pdf
MARINE GEAR
Place your ad! Contact: Wendy Jalbert
MARINE GEAR & SUPPLIES
BARGE PUMPS
750 Ton Floating Steel Drydock
Type: Sectional 6 Pontoon Overall 152’ x 58’ (46‘ inside) 6’ Pontoon Depth 24 Vertical lift gate valves; 24 centrifugal 4” pumps Built 2011, In excellent operating condition Buyer responsible for relocation costs Gulf Coast Region US $850,000 For purchasing inquires contact: gulfcoastshipyard@gmail.com
IMO ROTARY SCREW ASPHALT PUMPS ASPHALT PUMPS
BYRON JACKSON BYRON JACKSON TURBINE PUMPS TURBINE PUMPS
BLACKMER BLACKMER ROTARY GEAR PUMPS ROTARY GEAR PUMPS
OUR 110TH YEAR OUR 110TH YEAR
DUVIC’S PUMPS
“Greater Downtown”HARVEY, LA 70059 Box 1237 • 504-341-1654 PH/FX
SIMPLE. RUGGED. RELIABLE.
KIENE Cylinder Pressure Indicators for measuring diesel engine firing pressures...
Hoss Winch Co., LLC
NEW & REFURBISHED WINCHES
Call or email for a quote or custom winch requirement! cgonsoul@gmail.com 850-255-5266
• Easy to use—simple and reliable. • Reduce maintenance costs. • Improve engine availability. • Use to balance cylinders. • Pinpoint engine problems. • Optimize fuel consumption. • Fits any standard indicator valve. • Recommended and used by major engine builders. • Minimal investment to monitor engine condition..
Call or e-mail for info!
1-800-264-5950 info@kienediesel.com www.kienediesel.com
ADVERTISERS INDEX
BMT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Bostrom, H.O. Co Inc . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Browns Point Marine Service, LLC . . . . . . . . . . . . . . . . . 12 Burger Boat Company . . . . . . . . . . . . . . . . . . . . . . . . . . 17 C & C Marine and Repair LLC . . . . . . . . . . . . . . . . . . . . 15 CAIG Laboratories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Cummins Filtration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54 David Clark Company Inc . . . . . . . . . . . . . . . . . . . . . . . . 14 Diesel Outboards LLC . . . . . . . . . . . . . . . . . . . . . . . . . . 49 Duramax Marine LLC . . . . . . . . . . . . . . . . . . . . . . . . . CV3 FPT Industrial . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Furuno USA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Gladding-Hearn Shipbuilding . . . . . . . . . . . . . . . . . . . . . 26 International WorkBoat Show . . . . . . . . . . . . . . 40 + 41,55 John Deere Power Systems . . . . . . . . . . . . . . . . . . . . . . 19 Jotun Paints Inc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 Kahlenberg Industries Inc. . . . . . . . . . . . . . . . . . . . . . . . 17 Karl Senner, LLC . . . . . . . . . . . . . . . . . . . . . . . . . . . . CV4 Kent Safety Products . . . . . . . . . . . . . . . . . . . . . . . . . . . 45 Lopolight. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 MAN Engines & Components Inc . . . . . . . . . . . . . . . . . . 23 McDermott Light & Signal. . . . . . . . . . . . . . . . . . . . . . . . 31 Mitsubishi Turbocharger and Engine America, Inc . . . . . . 7 Moteurs Baudouin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39 Motor-Services Hugo Stamp Inc. . . . . . . . . . . . . . . . . . . 47 MTU - A Rolls-Royce solution. . . . . . . . . . . . . . . . . . . CV2 NCP Coatings Inc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53 Paci c Marine Expo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Panolin America Inc . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 Platypus Marine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 Point Eight Power Inc . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 Propspeed - Oceanmax International . . . . . . . . . . . . . . . 29 R M Young Company . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 R W Fernstrum & Company . . . . . . . . . . . . . . . . . . . . . . . 6 Thomas USAF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 TideSlide Mooring Systems - PSI Marine Inc . . . . . . . . . 26 Transport Products and Service Enterprises, Inc.. . . . . . 28 Volvo Penta. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51 Webasto Thermo & Comfort North America, Inc . . . . . . . 5 Yanmar America . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
STATEMENT OF OWNERSHIP MANAGEMENT AND CIRCULATION (SECTION 3685, Title 39, United States Code) October 1, 2021
WORKBOAT is published monthly by Diversified Communications, 121 Free Street, PO Box 7438, Portland, ME 04112. PUBLISHER: Bob Callahan, Diversified Communications, PO Box 7438, Portland, ME 04112; EDITOR: David Krapf, PO Box 1348 Mandeville, LA 70470; OWNER: Diversified Holding Co., 121 Free Street, Portland, ME 04101. Annual Subscriptions for WorkBoat: USA: $39.00 Canada: $55.00 All other countries: Airmail $103.00 INDIVIDUAL STOCKHOLDERS OWNING OR HOLDING 1% OR MORE OF TOTAL AMOUNT OF DIVERSIFIED HOLDING CO. STOCK AS OF TODAY OR SOONER THAN OCTOBER 1, 2021
Josephine H. Detmer
121 Free Street Portland, Maine 04101
Zareen Taj Mirza
121 Free Street Portland, Maine 04101
Daniel W. Hildreth
121 Free Street Portland, Maine 04101
Malcolm B. Hildreth
121 Free Street Portland, Maine 04101
Thomas W. Hildreth
121 Free Street Portland, Maine 04101
Anita Sundaram
121 Free Street Portland, Maine 04101
Extent and Nature of Circulation
Avg No. Copies Actual No.Copies of Each Issue of Single Issue During Preceding Published Nearest 12 Months to Filing Date
TOTAL NO. OF COPIES PRINTED: 20,003 19,271
Paid/or Requested through Circulation (Not Mailed): -0- -0-
Paid or Requested Mail Subscriptions: 20,003 Total Paid and/or Requested Circulation: 20,003 Free Distribution by Mail: 1,799
Free Distribution outside the Mail: 29 19,271
19,271
1,810
0
Total Nonrequested Distribution:
1,828 Total Distribution: 21,831
Copies Not Distributed: Office Use, Left overs, Spoiled 289 1,810
21,081
293
Total:
22,120
Percent Paid and/or Requested Circulation: 90.4% Paid Electronic Copies 5,105 21,374
90.2% 5,822
LOOKS BACK
NOVEMBER 1961
• A new 278', twin-screw, dieselelectric suction dredge, the Kairyn Maru, was placed in service recently by the Japanese Ministry of Transportation. Built at Mitsubishi Nippon Heavy Industries, the vessel is capable of dredging to a maximum capacity of 59' and has a hopper capacity of 2,227 cu. yds. • Hillman Barge and Construction Co., Pittsburgh, recently delivered two 195'×35'×11' liquid barges to FMC Corp. and will complete a third unit for the company next month. The barges will be used to carry liquid caustic soda (sodium hydroxide) in bulk. • A new 77' aluminum personnel boat, the Caltex Lumba-Lumba (porpoises in Indonesian), was completed by
NOVEMBER 1971 Paasch
Marine
Service, Erie, Pa., recently for Caltex Paci c Oil Co. The new boat will operate between Singapore and a Caltex oil loading terminal at Dumai on the island of Sumatra.
• A Mississippi River collision that resulted in three deaths last Nov. 24 was caused by the sharp right turn of a supply vessel across the path of an oncoming tanker. The captain of the supply vessel had failed to answer the tanker’s signals or to establish a “meeting” agreement between the two vessels, the National Transportation Safety
• The Rivergate Exhibition Center in New Orleans, the largest exhibition facility in the South, will again be the site of the Commercial Marine Industry Trade Show. Dates for the 1972 exhibition will be April 20-22. The show is expected to attract 4,000 participants. • The Federal Maritime Commission announced in the Nov. 2 Federal Register that effective Nov. 30 every vessel subject NOVEMBER 1981 to the
Board said. • Of cials at Peterson Builders Inc., Sturgeon Bay, Wis, have announced the signing of a $54 million Navy contract for the detail design and construction of the new ARS-50 rescue/salvage vessel. The Navy also has an option to order four additional ARS-50 vessels under the contract. commission’s oil pollution nancial responsibility requirements must maintain an original or copy of its certi cate on board and make it available to U.S. government of cials if asked to do so.
Duramax Marine® Products and Knowledge You Trust.
All Made in USA
Booth 1339 Booth 2001
Duramax Marine® is the world leader in water-lubricated bearing technology and has gained the trust of marine professionals around the world, setting performance records our competitors are still trying to meet.
www.DuramaxMarine.com
DryMax® Rudder Seal
This axial system provides excellent sealing and can accommodate large increases in radial clearances due to wearing down of rudder stock bushings. Designed to deliver long service life.
DryMax® Shaft Seal DuraCooler® SuprStak® Keel Cooler
Shaft Sealing System has nitrile rubber seal that rotates with the shaft and creates a hydrodynamic seal. Seal is easy to maintain, reliable, and boasts a low life cycle cost and total cost of ownership. SuprStak® with TurboTunnel design is engineered to “jet” turbulent seawater in a tunnel-like configuration that greatly enhances heat transfer.
DuraBlue® Rudder Bushings Rudder Bushings
Composite Rudder Bushings and Thrust Washers that are self-lubricating and pollution free. They are dimensionally stable with ultra low friction and extremely long wear life.
Johnson® Cutless® Bearings
Water-Lubricated Rubber Bearing Technology that has nothing more to prove. It’s the longest life bearing in harsh abrasive laden river applications.
Duramax Marine® is an ISO 9001:2015 Certified Company