Würth Additives by Würth UK Ltd.

GIVE YOUR ENGINE A NEW LEASE OF LIFE!

W端rth Additives

ENGINE FLUSH AND CLEANER

www.wurth.co.uk technical hotline 0845 450 0003

Cleaner for all petrol and diesel engines with or without catalyst The oil found in today’s motor vehicles differs dramatically to the lubricants used 10 years ago. Synthetic and semi synthetic oil now seems to be used in the majority of new vehicles. This type of oil keeps its viscosity for longer and prevents “black sludge” building up, however, one apparent weakness of this new generation oil is it is not as soluble as the old mineral oil so it does not absorb the by-products of combustion (dirt and particles) as well. If these particles are left to build up they could start to clog oil ways thus starving the engine of vital oil that can lead to premature wear and component failure. So there is still very much a need for Würth Engine Flush and Cleaner. • An agent to thin old oil, breaking down sludge and particle build up to ensure maximum drainage. • A detergent to clean away residues and unclog oil ways, galleries and neutralise crankcase acids. • A lubricant, (organic molybolan compound) to protect the engine while the solvents and detergents are cleaning.

• Newly developed concentrated agent for dirty engines or old oil Your advantages: • New oil remains effective and clean longer. • Loosens dirt and sludge deposits inside the engine. • Dirt is effectively removed when used oil is drained.

• Contains surfactants with a strong detergent action Your advantage: • Cleans and flushes the entire engine oil circuit. Description Engine Flush and Cleaner Filling Hose

Contents 400ml –

Art. No. 0893 558 0891 565

Uses/Areas of Use: • If black sludge is suspected. • If hydraulic tappets chatter. • If the oil change is overdue. • In the event of a loss of compression from sticking piston rings. • For all mineral and synthetic based engine oils. • At every service to maintain optimum performance. Application: Before changing the oil, ensure the oil level is within the normal operating range and the engine is warm. Add contents and run engine for 10 minutes, then immediately change oil and filter. Dosage: 400ml is sufficient for 3 to 6 litres of motor oil.

The information expressed is intended as a recommendation only, based on our tests and experience. However, we cannot accept any responsibility for results in individual cases because of the wide variety of applications as well as storage and processing conditions beyond our control. This also applies when making use of our technical and commercial customer service which is supplied free of charge and without obligation. We always recommend that you carry out individual tests. The cleaning and care instructions of the manufacturer must be observed! We guarantee the consistent quality of our products. Subject to technical changes and developments.

ENGINE OIL ADDITIVE

ENGINE OIL ADDITIVE Cleans and protects all petrol and diesel engines

www.wurth.co.uk technical hotline 0845 450 0003

• Ideal for use as engine oil top up, will mix with both mineral and synthetic based oils. • Can be used to up grade the specification of basic oil. • Contains an organic molybdenum compound OMC2, which regenerates the oil, during the oils life span it loses some of its lubricating properties due to natural deterioration and the stresses that cold starting place on its molecular structure. • Will benefit vehicles with extended service intervals. • Help prevent hydraulic tappet chatter.

• Contains the highly effective organic molybdenum compound OMC2 Your advantages:

Uses/Areas of Use: • Upon every repair of the engine. • Every time the oil is inspected. • If oil sludge is found. • Suitable for all petrol and diesel engines with or without turbocharger, with or without catalyst. • Suitable for all mineral and synthetic based engine oils.

• Frees gummed piston rings and cleans the oil circuit up to the piston ring area Your advantages:

Application: Add contents of the can to the engine oil. Dosage: 300ml is sufficient for 4.5 litres of motor oil.

• Optimum surface smoothing due to thermoplastic deformation. • Reduces engine friction and prolongs engine life. • Refreshes corroded surfaces.

• Protects against corrosion, oil sludge and clogged oil channels Your advantage: • Prolongs life of engine.

• Increases compression. • Smoother running.

• Supplements the spent active ingredients of motor oil • Neutralises aggressive combustion acids • Conforms to the modern API engine oil standards Description Engine Oil Additive Filling Hose

Contents 300ml –

Art. No. 0893 557 0891 565

DIESEL ADDITIVE

DIESEL ADDITIVE For all common diesel engines with or without a catalyst • Lowers exhaust emissions and helps to prevent excessive soot and smoke. • Contains cetane stabiliser. • Aids cold starting • Quietens fuel related knocking. • Helps prevent moisture build up in the fuel tank. • A sulphur substitute gives extra lubrication to vital injection components. • Neutralises acids formed during the combustion process, so helps prevent oxidisation corrosion. • Can be used on a regular basis when filling the tank. • Cleans and lubricates the fuel system. Uses/Areas of Use: • After any repairs to the fuel injection system and to the engine in general. • After any tuning work. • For starting problems. • At every service to maintain optimum performance and fuel economy.

www.wurth.co.uk technical hotline 0845 450 0003

• Loosens and removes deposits particularly within injector pumps and injection nozzles Your advantage: • Reduces the soot in exhaust emissions.

• Neutralises and binds acidic condensation Your advantages: • Protects fuel system from corrosion. • Cleans and protects from fuel tank to combustion chamber.

• Stabilises cetane number (combustibility) Your advantages: • Improves starting. • Reduces fuel-induced knocking.

• Enhances lubricating action when using low sulphur fuels Your advantage: • Prolongs engine life. Description Diesel Additive Filling Hose

Contents 300ml –

Art. No. 0893 565 0891 565

Application: Add contents of can to fuel tank. Dosage: 300ml is sufficient for 30 to 50 litres diesel fuel. Technical Data: • Concentrated agent based on synthetic components as used in national and international diesel fuels.

COMMON RAIL DIESEL ADDITIVE

www.wurth.co.uk technical hotline 0845 450 0003

Cleans and protects high pressure diesel systems Specifically designed for the latest common rail and high pressure diesel injection systems. • Contains a sulphur substitute, which acts as an antioxidant and helps prevent the formation of deposits. • Reduces the amount of smoke and soot in the exhaust gas. • Increases the lubricating properties and anti wear characteristics of the diesel fuel (exceeds HFRR test DIN ISO 12156). • Contains a cetane stabiliser. Uses/Areas of Use: • If a part in the common rail injection system has been repaired or changed, the quality of the fuel is extremely important due to the high pressure that the common rail runs at - up to 20,000 PSI. The new parts need a smooth “running-in” period with a high lubricating fuel. Without the use of an additive such as this, extreme premature wear can occur. • At every service to maintain optimum performance and fuel economy.

• Loosens and removes deposits particularly within injector pumps and injection nozzles Your advantage: • Reduces the soot in exhaust emissions.

• Neutralises and binds acidic condensation Your advantages: • Protects fuel system from corrosion. • Cleans and protects from fuel tank to combustion chamber.

• Stabilises cetane number (combustibility) Your advantages: • Improves starting. • Reduces fuel-induced knocking.

• Enhances lubricating action when using low sulphur fuels Your advantage: • Prolongs engine life. Description Common Rail Additive Filling Hose

Contents 300ml –

Art. No. 0893 567 0891 565

Application: Add contents of can to fuel tank. Note: On common rail and high pressure diesel vehicles it is advisable not to “drag” contaminated fuel through the system because of the points made above. The best course of action is to drain the tank and refill with new clean fuel whilst using a Würth common rail diesel additive to reduce the chances of damage to the system. Dosage: For best results use when there is at least 20-30 litres of diesel present, 1 can will treat up to 80 litres of fuel.

AIR CONDITIONING DISINFECTANT SPRAY

DISINFECTANT SPRAY Advanced dispensing of specially formulated air conditioning system cleaner

www.wurth.co.uk technical hotline 0845 450 0003

Two applications per can All air conditioning systems produce condensation as a by product of their cooling action. If not used on a regular basis the condensation will stagnate and this will result in a build up of mould, mildew and fungi that, in turn will lead to unpleasant odours being smelt in the cockpit. Not only are these odours unpleasant but the bacteria present can lead to serious illness if the driver has prolonged exposure to them. • Penetrates fully where contamination is found. Helps to prevent future build up. • A unique patented formulation cleans, disinfects and protects. • Reduces the risk of allergies and respiratory problems, which may be triggered by bacteria or other micro organisms within the air conditioning system. • Contains no perfumes or fragrances only active disinfectants. • Approved by the German Association for Hygiene and Microbiology in accordance with the DGHM/VII List.

• Multi-spray nozzle ensures specialist cleaner reaches all contaminated areas Your advantage:

Recommendation: We recommend thorough cleaning and disinfection of the entire air conditioning system at least once a year.

• AOX free. Your advantage:

• Long term protection as cleaner reaches and penetrates all areas where contamination accumulates preventing future build up.

• Special patented formulation cleans, disinfects and protects Your advantages: • Even permeates thick, greasy build up of dirt to effectively remove germs, bacteria, fungi, mildew and unpleasant odours. • Protects against allergies and respiratory problems which may be triggered by bacteria or other micro-organisms within the air conditioning system.

• Fast and simple application Your advantages: • Requires no time consuming dismantling or manual cleaning of air conditioning system, therefore saving time and money. • Loosened contamination is drained without problem through the condensation water drain.

• For environment protection of ground and water. Prevents problems with local sewerage law.

Please Note: Disinfectant Spray can only be used in conjunction with the Spray Hose 0891 764 12 Description Spray (with Hose) Hose (approx 80cm long)

Contents 300ml –

Art. No. 0893 764 10 0891 764 10

air conditioning drain

EVAPOmat SYSTEM 速

EVAPO clean and EVAPO fresh 速

速

EVAPOmat®

www.wurth.co.uk technical hotline 0845 450 0003

Eliminates odours in the vehicles air conditioning and interior The EVAPOmat® atomises cleaning and odour eliminating active substances with the aid of three ultrasonic cells. Uses/Areas of Use: • The active substance mist is blown out of the EVAPOmat® by a fan. The fine vapour is distributed in the entire ventilation duct or in the vehicle interior and is deposited on the evaporator surface or on the textiles and reliably eliminates unpleasant odours caused by bacteria and fungi. After approximately 15 minutes the EVAPOmat® is switched off, however the fan continues to run for at least another 5 minutes to cool down the cells.

• No laborious dismantling of the evaporator required or drilling of application holes. The same steps for all vehicles. Your advantages: • Simple/Quick/Cost-effective.

• EVAPOmat® is suitable for the use of EVAPO®clean and EVAPO®fresh. Your advantages: • Wide range of potential applications. Description EVAPOmat set

Contents -

Art. No. 0964 764 2

Description EVAPOclean

Contents 100ml

Art. No. 0893 764 1

Description EVAPOfresh

Contents 100ml

Art. No. 0893 139 1

EVAPO®clean Hygienic cleaning agent for use with EVAPOmat® system Uses/Areas of Use: • Eliminates and effectively prevents the occurrence of unpleasant odours and allergic reactions that are caused by bacteria and fungi. Quick and easy application for passenger vehicles, commercial vehicles and agricultural machines.

EVAPO®fresh Quick acting, odour absorber for use with the EVAPOmat® system Uses/Areas of Use: • Effectively neutralises and eliminates unpleasant cigarette, animal, perspiration or musty smells in the interior of vehicles, in the driver’s cab and in enclosed spaces.

NOTE: For vehicles that have not been disinfected for more than 1 year, the following steps must be performed prior to using EVAPO®clean: • Check pollen/activated carbon filter and replace if necessary. • Flush evaporator with disinfectant spray, 0893 764 10, then treat.

QUICKFRESH

www.wurth.co.uk technical hotline 0845 450 0003

Eliminates odours in the vehicles air conditioning and interior The finely atomised active substance effectively eliminates unpleasant odours generated in the ventilation channels of the air conditioning and the vehicle interiors due to bacteria and fungi. Preventively acts against allergic reactions. Leaves a pleasant fresh fragrance behind. Uses/Areas of Use: • Cleaning of air conditioning: Switch off the air conditioning, switch on the ventilation mode, keep ventilation at maximum and select cold temperature level. Place the can in the suction area of the ventilation system (located in the front passenger foot-well) and press the spray head (see fig. 1). Close the doors during the operation (approximately ten minutes). Ventilate the vehicle well after the use. • Cleaning the vehicle interiors: Place the aerosol can centrally inside the vehicle and press the spray head (see fig. 2). Close the doors during the operation (approximately ten minutes). Ventilate the vehicle well after the use. NOTE: A constantly odourless air conditioning and vehicle interior is possible only when regular and professional preventive measures are taken. We recommend at least 1-2 times a year.

• User friendly Your advantages: • Quickly eliminates unpleasant odours. • No costly dismantling work required on the evaporator and the vehicle interiors.

• Universal and mobile Your advantages: • Same steps for all types of vehicles. • No manuals needed. • Compact and handy.

• Attractive display Your advantages: • Outstanding retail article. • Additional profit for workshop. • Further billable unit – one can for one use.

• AOX and silicone-free Description Quickfresh

Contents 100ml

Art. No. 0893 764 51

COUNTER DISPLAY (EMPTY) 1893 764 001

HEADERBOARD (2 SIDES) 1893 764 000

figure 1 Vehicle air conditioning The active substance is sucked in via the ventilation system and settles on the evaporator surface as well as the ventilation channels.

DL COUNTER LEAFLET x 20 (2 TYPES) 1893 764 002

figure 2 Vehicle interiors The active substance circulates in the entire interior of the vehicle and settles on the textile surface.

INJECTION CLEANER

INJECTION CLEANER Fuel additive for cleaning petrol injection engines • Specifically designed for all fuel injected vehicles. • A more concentrated formulation than normal petrol additive, for stubborn contamination. • A powerful cleaner of the whole fuel system, cleanses by removing residue build up that can restrict engine output and increase fuel consumption. • Reduces engine emissions. • Contains an octane stabiliser. • Can overcome sticking valves and helps reduce exhaust emissions. • Lubricates whilst cleaning. Uses/Areas of Use: • In the event of increased fuel consumption caused by an inadequate quantity of fuel being injected. • Can be used preventively at every service. • For all petrol injection engines with or without catalyst. • At every service to maintain optimum performance and fuel economy.

www.wurth.co.uk technical hotline 0845 450 0003

• Binds and neutralises acidic condensation Your advantage: • Protects fuel system from corrosion.

• Removes resins and paint-like deposits from the injection valves and fuel distributor Your advantages: • Ensures precise control of injection valves. • Results in fuel savings due to precise injection and atomisation.

• Cleans fuel system from tank to combustion chamber Your advantage: • Ensures reliable operation of catalyst and lambda probe.

• Corrosion prevention test meets DIN 50017 standards Description Injection Cleaner Filling Hose

Contents 300ml –

Art. No. 0893 560 0891 565

Application: Add contents of can to the fuel tank. Dosage: Ideally 1 can per 50 litres of fuel.

PETROL ADDITIVE

PETROL ADDITIVE For all spark-ignition engines with or without catalyst • Cleans the whole of the fuel system, removes resins, oxidation residues, reduces valve and combustion chamber deposits and maintains injector cleanliness. • Can be used on a regular basis to enhance smooth running and performance of the vehicle. • Contains an octane stabiliser. • Helps lower engine emissions • Can also be used if moisture, diesel and other residues have contaminated the fuel. • Keeps fuel lines free from corrosion on older vehicles (most new vehicles now have plastic fuel lines). • Helps prevent problems experienced when low quality fuel is used. Uses/Areas of Use: • In event of contamination of fuel system, such as condensation. • In the event of the formation of resins and paint-like deposits forming on or in fuel lines, fuel pump, carburettor, valve seats and valves. • At every service to maintain optimum performance and fuel economy. Application: Add contents of the can to the fuel tank. Dosage: The fuel quantity should be between 10 and 100 litres of petrol. Ideally 1 can per 50 litres of fuel.

www.wurth.co.uk technical hotline 0845 450 0003

• Contains thermo-resistant alkaline wetting and cleaning agents Your advantages: • Prevents deposits in jets, intake system, valves and valve seats. • Protects against icing in carburettors.

• Cleans paint-like deposits, resins and oxidation residues from fuel pump, fuel lines and carburettor Your advantages: • Extends life of catalyst and lambda probe through optimum combustion. • Reduces fuel consumption through precise fuel preconditioning.

• Results in widespread dispersion of condensation in fuel tank Your advantage: • Keeps fuel lines and carburettor free of corrosion.

• Neutralises and binds acidic condensation Your advantages: • Protects fuel system from corrosion. • Cleans and protects from fuel tank to combustion chamber. Description Petrol Additive Filling Hose

Contents 300ml –

Art. No. 0893 559 0891 565

Technical features/effects: • Proven effective cleaning by a complete engine test. • Corrosion prevention test meets DIN 50017 standards. • Lubricates whilst cleaning.

SYSTEM CLEANER

SYSTEM CLEANER For all carburettor and petrol injection engines with or without catalyst • The most concentrated form of additive for petrol engines in the Würth range. • Contains unique fuel compatible detergents with active cleaning properties. • Thoroughly cleans, decokes the intake area, combustion chamber and frees sticking valves. • Should be used before any engine tuning takes place. • For best results insert into vacuum hose as close to inlet manifold as possible. Uses/Areas of Use: • In the event of a loss of compression. • If fuel consumption increases. • If engine performance decreases. • In the event of delayed accelerator response. • Particularly suitable for use before tuning the engine and analysing exhaust gas emissions. Application: Attach Spray Probe to can. Disconnect vacuum hose at a suitable point and insert Spray Probe. With the engine warm and running at about 2000rpm, spray half of the product evenly into all intake ducts whilst simultaneously moving the probe to and fro. Allow 30 minutes for the product to take effect, after which add rest of product.

www.wurth.co.uk technical hotline 0845 450 0003

• Cleans the entire intake area, combustion chambers and valves Your advantages : • Special spray hose ensures even distribution of cleaner in intake area. • Reduces fuel consumption. • Improves engine performance, accelerator response and warm-up phase.

• Cleans inlet and exhaust valve guides Your advantage: • Leads to a more even compression pressure.

• Protects against burnt out valves and ensures secure valve seating Your advantage: • Increases life of the engine.

• Contains fuel-compatible detergents in an active cleaning solution Please Note: System Cleaner can only be used in conjunction with the Spray Probe Art. No. 0891 564 Description System Cleaner Spray Probe

Contents 300ml –

Art. No. 0893 564 0891 564

Dosage: 1 can for a 4-cylinder engine. 2 cans for engines with 6 or more cylinders.

LEAD SUBSTITUTE

LEAD SUBSTITUTE For petrol engines with unhardened valve seats For older vehicles that were originally manufactured to use leaded fuels. Uses/Areas of Use: • Engines with unhardened valve seats (cars, lawn mowers, marine engines, stationary engines). Application: Lead substitute is self-mixing and is added to the fuel using the measuring device at the top of the bottle. Dosage: One bottle is sufficient for 250 litres of fuel.

www.wurth.co.uk technical hotline 0845 450 0003

• Contains organic sodium compounds which form a protective layer on valve seats and valve heads Your advantages: • Prevents deformation and pocketing of valves. • Protects against knocking, pinking and late ignition. • Increases life of valve seats, exhaust valves and the entire fuel system.

• Contains no heavy metal compounds Your advantage: • Can also be used on cars with retrofitted unregulated catalysts.

• Neutralises acidic condensation Your advantage: • Protects exhaust system from internal corrosion.

• Comes with measuring device Your advantage: • Ease of application. Description Lead Substitute

Contents 250ml

Art. No. 0893 563

OCTANE BOOSTER

www.wurth.co.uk technical hotline 0845 450 0003

Multi-purpose fuel additive to increase the octane number for all petrol engines • Environmentally friendly high performance additive to improve the octane number of fuel by 2-5 points. • Ensures economical and ecologically safe operation of the complete fuel system with enhanced power output. • Recommended for all petrol engines including carbureted, fuel injected, turbo, super charge and including 2 stroke engines. Plus marine, industrial, and farm engines. Uses/Areas of Use: • To maintain optimum engine performance. • In the event of engine noises like ringing or knocking. • In the event of poor exhaust emission values. • In the event of poor starting behaviour. Properties: • Complex organometallic compound dissolved in solvents containing oxygen for promotion of combustion with octane-increasing special additive. Free of lead and other heavy metals. Application: • Add to the fuel tank when refuelling, ideally 1 can to 60 litres of fuel (equivalent to a mixing ratio of 0.5%). • Not suitable for diesel vehicles.

TYPICAL RON RATINGS (Guide Only) Fuel Type RON Number After Octane Booster Added Regular Un-Leaded ……………………91-93 …………………………………………96-98 Premium Un-leaded ……………………95 …………………………………………100 Lead Replacement Petrol ………………96 …………………………………………100 High Octane Petrol …………………………98 …………………………………………100

• Improves vehicle performance Your advantages: • Results in improved fuel quality and engine output. • Octane number increased by 2-5 points.

• Improves life cycle of the complete fuel system Your advantages: • Protects against carburettor freezing • Protects against corrosion • Protects against engine knocking

• Low-emission, environment-friendly fuel combustion Your advantages: • Reduced fuel consumption. • Improved emission values. Reduces harmful substances in exhaust gases by insuring optimal combustion

• Suitable for use with catalysts and turbochargers • Suitable for use with leaded or unleaded petrol Description Octane Booster Filling Hose

Contents 300ml –

Art. No. 0893 559 100 0891 565

COUNTER DISPLAY (EMPTY) 1893 559 100

DL COUNTER LEAFLET x 20 1893 559 101

TRANSMISSION ADDITIVE

www.wurth.co.uk technical hotline 0845 450 0003

Lasting protection for manual gearboxes of all types. This product has now been reformulated for use not only in manual transmissions but also differentials. • Quietens gearbox noise and differential whine. • Allows smoother gear changes. • Protects against high stress loads when towing by reducing friction and lowering the operating temperature of the gear oil. • Can be used after repair work to protect new gears and cogs, plus it also ensures the smooth bedding in of components. • Compatible with all mineral and synthetic based oils. • Revitalises ageing transmission and differential oils. Uses/Areas of Use: • If transmission noises occur. • If gear changing becomes difficult. • Can be used preventively whenever the gearbox oil is changed or when repairs are made to the transmission. • Suitable for use with mineral or synthetic based transmission oils. Note: Not suited for polyglycol oils.

• High-performance lubricant containing the highly effective organic molybdenum compound OMC2 Your advantages: • Optimum surface smoothing due to thermoplastic deformation. • Reduces and minimises wear. • Refreshes already affected surfaces. • Quietens noisy transmission systems.

• Stabilises the viscosity of the transmission oil Your advantages: • Ensures optimum transmission operation. • Provides lasting protection for manual transmissions under extreme thermal and dynamic loads.

• Slows down the ageing process of the oil Your advantage: • Extends the life of the gearbox.

• Concentrated agent based on international specification MIL-L-2105/API-GL-4, for handling peak pressure loads Description Transmission Additive

Contents 125ml

Art. No. 0893 552

Application: Screw on filler hose (this allows easy application even in hard-to-reach places) and add contents of can to existing transmission oil by tilting the valve. Dosage: The amount of Transmission Additive must not exceed 10% of the total of transmission oil contents. Sufficient for 2.5 litres of transmission oil.

RADIATOR CLEANER

RADIATOR CLEANER Suitable for all engines when carrying out radiator and cooling system repairs • Use when cooling system has become contaminated, after head gasket or water pump failure. • Clears oil and dirt residues from the cooling system. • Compatible with all types of antifreeze. • Will also remove scale and rust build up from internal surfaces of the cooling system, and the sticky deposits that form when incompatible coolants are mixed. (i.e. monoethylene glycol antifreeze and OAT coolant). • Neutralises lime residues. • Restores cooling system efficiency. • Will not damage any components in the cooling system as it is, non aggressive to plastics, rubbers or metals. Uses/Areas of Use: • If the cooling system becomes contaminated after an engine repair, e.g. oil residues in cooling system due to cylinder head damage. • In event of deposits forming in cooling circuit. • Can be used preventively whenever the coolant is changed.

www.wurth.co.uk technical hotline 0845 450 0003

• Removes corrosion and sludge deposits in cooling circuit Your advantage: • Enhanced operating reliability due to a clean cooling system.

• Alkaline, pH 8–9 Your advantage: • Not aggressive to plastics, rubber or metals.

• Neutralises lime residues Your advantage: • New coolant is protected against contamination.

• Antifreeze compatible, highly effective surfactant mixture • Loosens and binds oily and greasy residues Description Radiator Cleaner

Contents 250ml

Art. No. 0893 556 2

Application: Add contents of can to coolant. Open heater valves. Run engine for about 30 minutes. Deposits which have been dislodged by the radiator cleaner must be flushed away without fail. Flushing can be carried out without removing the thermostat. Replace coolant after use, bleed and check for leaks. It is recommended to replace parts that have been affected by intruding oil, such as the expansion tank and water hoses. Dosage: 250ml is sufficient for 10 litres of coolant.

RADIATOR SEAL HP

RADIATOR SEAL HP Protection for all modern, high performance, cross flow cooling systems • Can be used in modern high performance, cross flow cooling systems. • Seals leaks up to 0.1mm in head gaskets and hose connections. • Can be mixed with all conventional glycol based and organic additive technology type antifreeze, coolant additives • Can be used after head gasket replacement as additional security on vehicles with a history of leaks. • A unique formulation of micro fine synthetic particles and active chemicals, which combine to seal without causing blockages to the thinner water ways found in today’s vehicles. • Will not attack rubber, plastics, alloy or nonferrous metals. • Can be used at every coolant change as a preemptive measure.

www.wurth.co.uk technical hotline 0845 450 0003

• Seals leaks to a maximum of 0.1mm in the area of cylinder head gaskets and hose connections Your advantage: • Dirt strainers in cooling circuit do not get clogged.

• Eliminates evaporation loss in heat exchangers, heater valves, radiators and auxiliary devices Your advantage: • Enhances operating reliability and protects against engine damage due to loss of coolant.

• Product effective until the next antifreeze change • Microfine synthetic particles provide sealing effect Description Radiator Seal HP Filling Hose

Contents 300ml –

Art. No. 0893 555 0891 565

Uses/Areas of Use: • In event of microscopic leaks in the cylinder head gaskets and hose connections. • In event of evaporation losses in the cooling system. • Whenever antifreeze is changed. • Can also be used on closed cooling systems. • Suitable for all conventional antifreezes and coolants. Application: With the engine warm, introduce directly to the cooling system. Only put into expansion tank if coolant flows through it. Then allow the engine to run for at least 10 minutes until the thermostat opens and you notice the heater starting to give off heat. Then turn off the engine, check the coolant level and top up if necessary. Dosage: Sufficient for 10 litres of coolant. CAUTION: Conventional radiator sealants should not be used on modern cross flow cooling systems since the strainers will get clogged; this can result in radiator failure and thus damage to the engine.

RADIATOR SEAL

RADIATOR SEAL Protection for all water-cooled systems of older designs without dirt strainers • For use in older type cooling systems without dirt strainers. • Uses organic particles to stop leaks so it will not attack rubber, plastics or light alloys. • Can be mixed with all conventional glycol based antifreezes and coolant additives. • Ideal for emergency cooling system repairs to prevent the loss of coolant and over heating. • Will not cause blockages to radiator cores or heater matrixes. • Can be used at every coolant change as a preemptive measure. Uses/Areas of Use: • For hairline cracks in radiator, engine block or cylinder head. • In the event of leaking hose connections. • In the event of defective head gaskets. • Mixes with all conventional antifreezes and coolants. • Also suitable for closed cooling systems.

www.wurth.co.uk technical hotline 0845 450 0003

• Organic particles provide sealing effect Your advantage: • Does not attack rubber, plastics, light alloys or non-ferrous metals.

• Seals hairline cracks and small leaks permanently. Protects cooling circuit and combustion chambers against leaks Your advantage: • Ensures operation of water pump and heater components.

• Prevents coolant loss Your advantage: • Enhances operating reliability and protects against engine damage caused by coolant loss. Description Radiator Seal Filling Hose

Contents 300ml –

Art. No. 0893 554 0891 565

Application: Shake can well before use. Add contents of can to warm coolant. Open heating valves and run engine for at least 10 minutes. Check coolant level and inspect for leaks. Dosage: Sufficient for 10 litres of coolant. Maximum mixture ratio for lorries is 1 to 100. CAUTION: If there are any dirt strainers in the cooling system, Radiator Seal must not be used. Please use Radiator Seal HP 0893 555

A2 ADDITIVE AND EMISSIONS POSTERS x 4 1893 558 116

A4 SERVICE STATEMENT FRAME (EMPTY) 1893 558 333

A4 SERVICE STATEMENTS x 6 1893 558 111

ADDITIVES PROFIT CALCULATOR 1893 558 115

EMISSION REDUCTION SERVICE DL COUNTER LEAFLET x 20 1893 558 117

DL ADDITIVES COUNTER LEAFLETS x 2 1893 558 113

COUNTER DISPLAY 1893 558 119

A GUIDE TO ROADSIDE EMISSIONS TESTING DL COUNTER LEAFLET x 20 1893 558 118

ADDITIVE DISPENSER DISPLAY CARDS x 6 1893 558 222

ADDITIVE DISPENSER

(EMPTY) 1893 558 999

ADDITIVE/ARGOS PROMOTION DL LEAFLET

ADDITIVES RACK (EMPTY) 1893 558 000

1893 558 444

AIR CONDITIONING DISINFECTANT PACK A3 Poster x 2 A4 Poster x 2 DL Counter Leaflet x 20 1893 558 114

WÜRTH UK

Würth UK was established in 1973, our products are universally acknowledged to be of the highest standards within the automotive, cargo, marine, motorcycle, agricultural, and metal industries. This, together with our excellent delivery and availability of products, makes us the No.1 supplier of consumables to the market place. Our reputation over the past 33 years has been gained through the adherence to a policy of supplying only a product of unrivalled quality, enhanced via a superb distribution network with paramount emphasis on customer service.

Würth UK Ltd. 1 Centurion Way Erith • Kent DA18 4AE Tel: 0870 5 98 78 41 Fax: 0870 5 98 78 42 additives@wurth.co.uk

www.wurth.co.uk technical hotline 0845 450 0003 WUK • 1893 558 666 • pjc - 12/06 • © Würth UK Ltd. All rights reserved in all media. No part of this catalogue may be reproduced in any form, copied or stored electronically, whole or in part without prior written permission. Every effort has been made to verify all information. Products may vary in appearance from those pictured. Würth UK Limited cannot accept responsibility for any errors or omissions or for any losses that may arise as a result.