Cutting and Grinding DISCS
Disc Identification Colour grinding system Encoded production date Colour strips stating the maximum cutting speed Disc classifications
Icons: Instructions for use Safety notice Application restrictions
Article number
Highest cutting speed and maximum rpm’s Disc dimensions
OSA-symbol and number
EN-number Application area
Barcode Specification and grain
Steel Non-ferrous metals/aluminum Stainless steel Stone Cast steel
blue yellow green grey black
Standard Cutting Discs • Sythetic resin-bound, fibre-reinforced high-performance standard cutting disc • For freehand cutting work with an electric or compressed air angle grinder • High break-resistance • Max. peripheral speed 80 m/s • Discs meet the safety requirements of the European standard EN 12413 and of the OSA (Organization for the Safety of Abrasives)
Cutting Disc Blue for steel Cut-off work on full materials, pipes, profiles and metal sheets. Ø x thickness mm 115 x 2.5 125 x 2.5 100 x 2.0 180 x 3.0 230 x 3.0
Hole mm
Design
22.2
Curved
16 22.2
Straight
max. rpm 13,300 12,200 15,300 8,500 6,600
Art. No.
Pack Qty.
0669 101 152 0669 101 252 0669 101 002 25 0669 101 803 0669 102 303
Standard Grinding Discs • Medium-hard disc • Sythetic resin-bound, fibre-reinforced high-performance standard grinding disc • For freehand grinding work with an electric or compressed air angle grinder • High break-resistance • Max. peripheral speed 80 m/s • Discs meet the safety requirements of the European standard EN 12413 and of the OSA (Organization for the Safety of Abrasives)
Grinding Disc Blue for steel Grinding of edges, weld seams and surfaces.
Ø x thickness mm 100 x 6.0 115 x 6.0 125 x 6.0 180 x 8.0 230 x 6.0
Hole mm 16
Design
22.2
Curved
max. rpm 15,300 13,300 12,200 8,500 6,600
Art. No.
Pack Qty.
0669 161 006 25 0669 161 156 0669 161 256 0669 161 808 10 0669 162 306
Speed Cutting Discs • Specially designed for thin-walled pipes and profiles, thin metal sheets, car body sheets • Extremely high cutting capacity; very long service life • Extremely thin for precise, virtually burr and chatterfree cutting; very clean and cool cutting surfaces • Work requires minimal effort and helps protect the user and machine • Minimal build-up of cutting waste and dust • Low noise output and high break-resistance
Cutting Disc Blue for steel Cut-off work on metal sheets, pipes, profiles, steel rope, reinforcing steel.
Ø x thickness Hole mm mm 115 x 1.0 115 x 1.6 125 x 1.0 22.2 125 x 1.6 180 x 2.0 230 x 2.0
Design
Straight
max. rpm 13,300 13,300 12,200 12,200 8,500 6,600
Art. No.
Pack Qty.
0664 101 150 0664 101 151 0664 101 250 25 0664 101 251 0664 101 802 0664 102 302
Cutting Disc Yellow for non-ferrous metals/aluminium Cut-off work on metal sheets, pipes, profiles, roof coverings, gutters.
Ø x thickness Hole mm mm 115 x 1.5 125 x 1.5 22.2 180 x 1.5 230 x 1.9
Design
Straight
max. rpm 13,300 12,200 8,500 6,600
Art. No.
Pack Qty.
0664 121 151 0664 121 251 25 0664 121 801 0664 122 301
Cutting Disc Green for stainless steel Cut-off work on pipes, ventilation ducts, metal sheets, containers, sheet metal constructions, pipesystems, bars, steel reinforcements, profiles, cable trays and ducts, high-voltage cables, steel rope, composite materials, plastics.
• Free from iron, chlorine and sulphur (≤ 0.1%) • Meets KWU class II (e.g. for pipe system and reactor engineering)
Ø x thickness mm 50 x 1.0 60 x 1.0 76 x 1.0 115 x 1.0 115 x 1.6 125 x 1.0 180 x 1.6 180 x 2.0
Hole mm
Design
6.0 10.0 Straight 22.2
max. rpm 30,500 25,000 20,100 13,300 13,300 12,200 8,500 8,500
Art. No.
Pack Qty.
0664 130 501 0664 130 601 50 0664 130 761 0664 131 150 0664 131 151 0664 131 250 25 0664 131 801 0664 131 802
Longlife Cutting Discs • Synthetic resin-bound, fibre reinforced, high-performance cutting discs • For freehand cutting work with an electric or compressed air angle grinders • Very low incidence of breakage • Minimal measurement and imbalance tolerances • Max. peripheral speed 80 m/s • Discs meet the safety requirements of the European standard EN 12413 and of the OSA (Organization for the Safety of Abrasives) • Very long service life • Optimum cutting of full materials and profiles • Very high laterial stability
Cutting Disc Blue for steel Cut off work on full materials, thick-walled pipes, profiles, metal sheets.
Ø x thickness mm 115 x 2.5 125 x 2.5 180 x 2.5 230 x 2.5 300 x 3.5 300 x 3.5 350 x 4.0* 350 x 4.0*
Hole mm 22.2 20.0 22.2 20.0 22.2
Design Curved
Straight
max. rpm 13,300 12,200 8,500 6,600 5,100 5,100 5,400 5,400
Art. No.
Pack Qty.
0670 101 152 0670 101 252 25 0670 101 802 0670 102 302 0670 103 023 0670 103 003 10 0670 103 524 0670 103 504
*maximum working speed: 100 m/s for use with petrol and electric cutting machines
Cutting Disc Yellow for non-ferrous metals/aluminium Cut-off work on cast-irons, full materials, pipes, profiles, metal sheets.
Ă˜ x thickness Hole mm mm 115 x 2.5 22.2 230 x 2.5
Design Curved Straight
max. Art. No. Pack rpm Qty. 13,300 0670 121 152 25 6,600 0670 122 302
Cutting Disc Grey for stone Cut-off work on stone, board, prefabricated components, bricks, tiles, clay pipes, roof tiles, clinker. Ă˜ x thickness mm 115 x 2.5 230 x 3.0 300 x 3.5 300 x 3.5
Hole mm 22.2 20.0 22.2
Design Curved Straight
max. rpm 13,300 6,600 5,100 5,100
Pack Qty. 0670 151 152 25 0670 152 303 0670 153 023 10 0670 153 003 Art. No.
Longlife Grinding Discs • Synthetic resin-bound, fibre reinforced, high-performance grinding discs • For freehand grinding work with an electric or compressed air angle grinders • Very low incidence of breakage • Minimal measurement and imbalance tolerances • Max. peripheral speed 80 m/s • Discs meet the safety requirements of the European standard EN 12413 and of the OSA (Organization for the Safety of Abrasives) • An all-round harder disc • Long service life combined with good metal-removing properties
Grinding Disc Grey for stone For grinding of grey cast iron, stone and synthetic stone, cleaning of shell bricks, bevelling of edges.
Ø x thickness Hole mm mm 115 x 6.0 125 x 6.0 22.2 180 x 6.0
Design Curved
max. rpm 13,300 12,200 8,500
Art. No.
Pack Qty.
0670 111 156 25 0670 111 256 0670 111 806 10
Grinding Disc Black for cast iron Grinding of cast-irons and edges, deburring, dressing.
Ø x thickness Hole mm mm 180 x 8.0 22.2
Design Curved
max. rpm 8,500
Pack Qty. 0670 191 808 10 Art. No.
• Particularly long service life combine with good metalremoving properties • An all-round harder disc.
Cutting Disc Blue for steel Grinding of edges, deburring, dressing of weld seams.
Ø x thickness Hole mm mm 115 x 4.0 115 x 7.0 125 x 4.0 22.2 125 x 7.0 180 x 8.0 230 x 8.0
Design
Curved
max. rpm
Art. No.
Pack Qty.
0670 161 154 13,300 0670 161 157 0670 161 254 25 12,200 0670 161 257 18,500 0670 161 808 16,650 0670 162 308 10
Lamella Fan Type Grindin • • • • • • • •
High volume of metal removal Wide range of applications Even grinding pattern until complete consumption of disc High flexibility and quiet operation Low-vibration grinding Low noise level Can be used without support disc Self-sharpening lamellas, no clogging
Normal corundum Steel, alloyed and unalloyed, construction steel, tool steel, soft non-ferrous metals, castings, hard plastics, wood. Surface grinding, weld seam finishing, removal of paint, tool sharpening, plastering and smoothing, deburring and edge finishing, rust removal, convex grinding.
Aluminum disc • Environment-friendly, since discs recyclable • Very good heat dissipation via aluminum disc • Rounded edge of the disc prevents shearing-off of lamellas Attention: Not suitable for stainless steel! Ø mm 115
Hole mm 22.2
Max. rpm 13,300
Grain 36 40 50 60 80
Curved Art. No. 0579 115 36 0579 115 40 0579 115 50 0579 115 60 0579 115 80
Pack Qty. 10
Fabric disc • Multilayer glass fabric disc Attention: Not suitable for stainless steel! Ø mm 115
125
178
Hole Max. mm rpm
Grain Curved Art. No. 40 0579 311 540 13,300 50 0579 311 550 60 0579 311 560 80 0579 311 580 120 0579 311 512 22.2 12,200 36 0579 312 536 60 0579 312 560 36 0579 317 836 40 0579 317 840 8,600 60 0579 317 860 80 0579 317 880 120 0579 317 812
Straight Pack Art. No. Qty. – – 0579 511 560 0579 511 580 – – 10 0579 512 560 – – – – –
g Discs Zirconium corundum Especially for stainless steel, chromium and nickel alloys. Steel, alloyed and unalloyed, construction steel, tool steel, soft non-ferrous metals, castings, hard plastics, wood. Surface grinding, weld seam finishing, removal of paint, tool sharpening, plastering and smoothing, deburring and edge finishing, rust removal, convex grinding.
Zirconium corundum - aluminum disc • Environment-friendly, since discs recyclable • Very good heat dissipation via aluminum disc • Rounded edge of the disc prevents shearing-off of lamellas Attention: Suitable for stainless steel! Ø mm
115
Hole mm
22.2
Max. rpm
13,300
Grain 24 36 40 50 60 80 120 150
Curved Pack Art.No. Qty. 0578 115 24 0578 115 36 0578 115 40 0578 115 50 10 0578 115 60 0578 115 80 0578 115 120 0578 115 150
Zirconium corundum - fabric disc • Multilayer glass fabric disc Attention: Suitable for stainless steel! Ø mm
115
125
178
Hole Max. mm rpm
Grain Curved Art. No. 36 0578 311 536 40 0578 311 540 13,300 50 0578 311 550 60 0578 311 560 80 0578 311 580 120 0578 311 512 36 0578 312 536 22.2 12,200 40 0578 312 540 60 0578 312 560 120 0578 312 512 36 0578 317 836 8,600 60 0578 317 860 80 0578 317 880
Straight Pack Art. No. Qty. 0578 511 536 0578 511 540 0578 511 550 0578 511 560 0578 511 580 0578 511 512 0578 512 536 10 – 0578 512 560 – – – –
Topsize Plastic Discs • Topsize coating (special zirconia corundum with cooling multiple bonding and active grinding fillers) • Especially soft and cool grinding • Extremely long service life • Low noise level • Even grinding performance up to complete wear of the grinding lamellas • Strong self-sharpening effect of the abrasive grain, no ”rounding” of grit points • ”Slim” carrier disc made from fiberglass, reinforced polyamide • Absolutely heat and cold resistant (+180°C to –40°C), thus no deformation or cracking during grinding • No side-slipping of the plastic disc Ø mm 115 125
Hole Max. mm rpm
Grain Curved Art. No. 40 0578 211 540 13,300 60 0578 211 560 22.2 80 0578 211 580 40 0578 212 540 12,200 80 0578 212 580
Straight Pack Art. No. Qty. 0578 611 540 0578 611 560 0578 611 580 10 – –
Nylon Fibre Grinding Wheels effective cleaning without damaging base metal Ø mm 100 150
Working speed rpm 3500-4500 2500-3000
Pack Qty. 0585 110 0 10/1 0585 115 0 5/1 Art. No.
Arbour Art. No. 0585 110 01 0585 115 01
Pack Qty. 1 1
Double discs • With integral arbour shaft, the supporting plastic flanges can be broken off in steps as discs wear down Ø mm 100 125 150
Working speed rpm 6000 6000 4000
Art. No. 0585 210 0 0585 212 5 0585 215 0
Pack Qty. 5/1 3/1
Cup Wheels • For use with your air and electric angle grinders Ø mm 100
Working speed rpm 6000
Art. No. 0585 310 0
Pack Qty. 5/1
Flexible Grinding Discs flexible backing for use with angle grinders with self sharpening characteristics due to crystal shattering along pre-determined stresslines exposing new cutting edges • • • •
Increased abrasive life Maximum stock removal Less clogging due to cooler operating temperature Ensure a backing support pad is used at all times
Zirconia Abrasives Ø external/internal mm Grain 100 x 16 (4”) 115 x 22 (4.5”) 180 x 22 (7”) Pack Art. No. Art. No. Art. No. Qty. 24 0580 010 024 0580 011 524 0580 018 024 36 0580 010 036 0580 011 536 0580 018 036 100/25 50 0580 010 050 0580 011 550 – 80 0580 010 080 0580 011 580 –
Nylon Backing Pads for Angle Grinders ext. Ø x int Ø mm Thread Ø
Art. No.
115 x 22
1586 104 1586 910 125 1586 910 15
100 x 16
M14 x 2.0 M10 x 1.25 M10 x 1.5
Pack Qty. 6/1
Super Thin Cutting Discs For Stainless Steel • • • • • •
High performance fibre reinforced cutting disc Lasts several times longer than conventional cutting discs Contains no iron sulphur (0.1%) No formation of rust on the cutting or spark impact point Reduced cutting waste, reduction in cutting dust Maximum. circumferential speed 80 m/s
Ø x thickness Hole mm mm 115 x 1.0 22.2
Design Straight
max. Art. No. Pack rpm Qty. 13,300 0669 031 150 25
Associated Products THE ASSEMBLY PROFESSIONALS
HEALTH AND SAFETY
Health and Safety
1999 16
for work protection when cutting and grinding • • • • • •
Gloves Goggles / Face Shields Masks Ear Muffs / Ear Plugs Overalls First Aid Dispensers / Eye Wash
Angle Grinder 115mm - 600W • • • •
Spindle lock Arbor 22mm No-load speed 11,000/min Wrench/side handle
0702 480 0
Arbors for Cutting and Grinding Discs Design Total length mm 6 mm shaft, for hole Ø 6.0 mm 6 mm shaft, for hole Ø 10.0 mm 60
Art. No. P. Qty. 0669 976 0669 978 1
WUK/aa • 08/06 • 1999 16
Würth UK Ltd. 1 Centurion Way Erith • Kent • DA18 4AE Tel 0870 5 98 78 41 Fax 0870 5 98 78 42 www.wurth.co.uk