s021 210 x 195 customer catalogue.qxp
26/11/2008
PLUMBING
Plumbers Mait
• • • •
• A non-setting waterproof sealant for joint assembly. • Plumbers Mait is the ideal product for sealing spigots and socket joints in sanitary fittings, bedding in of sinks and vanity units prior to final sealing with a silicone sealant. For outdoor use on rain water down spouts and guttering. Excellent adhesion to metal, PVC, vitreous enamel and ceramics. It remains permanently flexible to withstand vibration and some degree of movement. Can be over-painted with any emulsion and gloss paint.
10:51
Page 44
Fire Cement
• A ready mixed, ready to use, finely ground putty substance which dries rock hard when exposed to heat. • Good adhesion. • Tested to 1250°, well in excess of any domestic appliance. • Ideal for patching and repairs to firebricks, fireplaces, solid fuel, ovens, ranges and boilers. • Not to be used in permanent contact with water. Description Tub
Contents Art. No. 2 kg 893.307.300
P/Qty 1/6
Fire Cement
• A white pipe jointing compound that is non-hardening linseed oil based material for sealing pipe threads in plumbing. • Non-toxic. • Easy to apply. • Designed for use with hot or cold water, natural gas and low pressure steam. • Not recommended for potable drinking water. • The jointing compound will not cause corrosion of aluminium, brass, copper, low carbon steel or zinc surfaces.
• Solvent-free 1C-sealing compound with extreme thermal resistance, high strength and very good adhesion to metal surfaces. • Sediment-free. No deposit of water glass i.e. no separation of the constituents. • Frost resistant. Storage temperature below 0°C (approx. -5°C) possible. • Suitable for use in the heating appliance sector, inparticular for sealing boilers, ovens, stoves, fireplaces, combustion chamber linings, flue gas pipes and various equipment and appliances in the high temperature sector up to 1,000°C, but also instead of sealing beads in doors of boiler installations after an annual inspection and or cleaning.
Description Tub
Colour Grey
Description Tub
Contents Art. No. 750 ml 892.103.001
P/Qty 1/12
White Pipe Jointing Compound
44
Contents Art. No. 400 g 893.761.303
P/Qty 1/20
Contents 310 ml
Art. No 893.290.0
P/Qty 1/6
Solvent Cement
• For bonding PVC and ABS pipe work. • A thixotropic solvent cement con forming to BS 6209 • Designed for spigot and socket bonding of nonpressure thermo plastic pipe systems such as PVC and ABS. • Comes with brush applicator fixed to lid. • Colour: Clear white. Description Tub
Contents Art. No. 250 ml 893.214.072
P/Qty 1/10
Burner Cleaner
• • • • •
• Suitable for oil, grease and soot contaminated burner components, baffle plates, nozzle connectors, fan wheels, inside housing, initiating electrodes, etc. • Outstanding cleaning capacity. Grease and oil are quickly and effectively dissolved and removed. • Contains anti-corrosion active ingredients. • Protects the system against rust and prevents formation of new deposits. Problem free application. After a short reaction time the product can simply be wiped off with a cloth. Ready to use solution. Suitable for all materials commonly used in boilers. AOX free. Silicone free.
Description Aerosol
Contents 500 ml
CALL NOW! 0870 950 2800 FOR FURTHER DETAILS.
Art. No. 893.771
P/Qty 1/12
26/11/2008
Central Heating Inhibitor
• A multi-purpose treatment, specially designed to protect the entire central heating system from scale, sludge and corrosion. • Checks corrosion • Disintegrates scale. • Treats up to 10 radiator systems. • WRAS approved formulation. • Suitable for use in wet central heating systems. Compatible with plastic and glassfibre header-tanks and with all metals used in central heating systems, which includes iron, steel, brass, copper and aluminium. Also suitable for micro-bore systems constructed from plastic pipes. Purimachos Protex is compatible with, and may be used to top up, systems previously treated with Mangers Protex or earlier Purimachos Inhibitors.
Description Container
Contents Art. No. 1 ltr 893.761.301
P/Qty 1/12
10:51
Page 45
Central Heating Cleaner & Sludge Remover
• Removes commissioning and flux residues from new central heating systems and restores circulation to old central heating systems which suffer from sludge. • Treats up to 10 radiator systems. • For use in accordance with BS 7593:1992 • Should also be used when central heating components are replaced or existing systems are extended. • Use in wet central heating systems. • Compatible with plastic tanks, micro-bore and all metals (including aluminium) used in central heating systems. • Only suitable for fully indirect systems. Not suitable for use with PRIMATIC single feed cylinders.
Description Container
Contents Art. No. 1 ltr 893.761.302
Central Heating Boiler Noise Silencer • • • •
Cures noisy central heating systems. Restores heating efficiency. Treats up to 10 radiator systems. Is a non-acid boiler descaler, which stays in the system for life; no need to flush. • Knocking and kettling can be especially irritating in the early hours or at night. Noisy boilers are usually attributable to hard water limescale and sludge deposit formation on the heat exchanger surfaces. These deposits also reduce heat transfer, which increases fuel bills and reduces the service life of the boiler. • Will remove scale and baked on sludge deposits and prevent them from reforming, thus restoring heating efficiency while reducing the noise and extending the life of the boiler. • Suitable for use in wet central heating systems. Compatible with plastic tanks, microbore and all metals (including aluminium) used in central heating systems.
P/Qty 1/12
Description Container
NEXT DAY DELIVERY -
Contents Art. No. 1 ltr 893.761.300
P/Qty 1/12
www.winzerwurth.co.uk 45 CALL NOW! 0870 950 2800 FOR FURTHER DETAILS.
on orders placed before 3pm.
PLUMBING
s021 210 x 195 customer catalogue.qxp
s021 210 x 195 customer catalogue.qxp
26/11/2008
PLUMBING
Pipe Freezer
• • • • • • •
• For 8 - 15 mm pipes. • A freezing spray to allow extension or repairs to heating and plumbing systems without turning off the mains. • No need to switch off the mains. No need to drain down the system. Will not damage pipes or joints. Forms a safe temporary ice plug. Freezes most pipes up to 15mm (½”) dia. Lasts up to 35 minutes. Fast acting within 5 minutes. No CFC’s or HCFC’s.
Description Contents Regular can with 220 g freezing jacket Spare cans only 220 ml
Art. No.
P/Qty
8902.99.10
1/10
8902.99.20
1/12
PTFE Tape • For sealing of threaded pipe connections (instead of hemp). Tested to DIN specifications DVGW. • Resistant to all aggressive chemicals. • Temperature resistant from 0°C - 80°C. • No glue or swelling of tape therefore, no seizing of threaded joints. • Easy to disassemble even after years of use.
Art. No. 985.030.165
10:52
Gas Blow Lamp
• • • • • • •
• High temperature gas torch for professional plumbers. • Instant flare safe. • Automatic ignition • Large powerful burner. • Advanced gas control system gives constant performance. • Moulded neckstand allows horizontal burning. • Durable chrome finish. • Stabilising base included.
Resealable cartridge. Butane propane mix. Flame temperature 1500ºC. Burner diameter 22 mm. Gas consumption 104g/h. Heat input 1.45 kw. Comes complete with 350 g cartridge.
Description Blow lamp complete Spare cartridge
Art. No. 715.94.160 715.94.1`00
Heat Protection Pad
P/Qty 1/10 P/Qty 1
Powerflow Flux
• An acid activated white paste for plumbing and general soldering. • Water council approved.
Weight 100g 350g
Art. No. 987.302.100 987.302.350
P/Qty 1/20 1/10
Lead Free Solder
• Grade: 99C. • Melting point: 225°C. • Ø 3.25 mm. • WRAS approved.
P/Qty 1/6 1/12
• For protection surrounding areas when soldering. • Ceramic fibre. • Asbestos free. • Size: 290 x 200 mm.
Art. No. 984.350.10
46
Page 46
Weight 500g
Solder
Weight 500g
CALL NOW! 0870 950 2800 FOR FURTHER DETAILS.
Art. No. 987.303
P/Qty 1/20
• Grade: 29% tin, 71% lead. • Melting point: solid 183°C, liquid 255°C. • Ø 3.0 mm.
Art. No. 987.301
P/Qty 1/20
Tap Washers
Size 13mm 19mm
26/11/2008
• Rubber washer for sink and bath taps.
Art. No. 408.000.012 408.000.034
10:55
Page 47
Scissor Action Cutter for Plastic Pipe • Suitable for cutting: PE (polyethylene) and PP (polypropylene) pressure pipe. • Ratchet gearing, for easy stress free cutting.
Tap Tool
• Also known as a “universal plumbing spanner”. • Fits; backnuts, taps, spindles, stopcocks, gate valves and ballcocks.
P/Qty 100 100
• Cuts pipes made of: copper, brass, lightweight alloy and thin walled steel. • Integral de-burring tool and spare wheel in handle. • For pipes Ø 3 - 30mm.
‘Stillson’ Pipe Wrench
• All steel construction. • Hardened and tempered jaws and adjusting nut. • As pressure is increased on the handle the jaws bite harder onto the work. L mm 200 200
L mm 150
Art. No. 715.55.44
P/Qty 1
Mini Pipe Cutter
• Cuts pipes made of: copper, brass, lightweight alloy and thin walled steel.
P/Qty 1
Art. No. 714.05.12
Small Pipe Cutter
PLUMBING
s021 210 x 195 customer catalogue.qxp
Pipe Ø mm 0 - 32 0 - 42
Art. No. 715.55.51 715.55.52
Adjustable Basin Wrench
P/Qty 1
• Allows loosening and tightening of 15 mm fittings in confined spaces. • Easily reversible. • Approx. length of bar: 240 mm.
L mm 203 254 610
Jaw Capacity 19 mm 25 mm 64
Art. No. 714.06.008 714.06.010 714.06.024
P/Qty 1
Pipe Pliers L mm 50
Pipe Ø mm 3 - 16
Art. No. 715.55.47
P/Qty 1
De-burring Tool
• Timesaving and simple de-burring of pipe ends.
Pipe Ø mm 3 - 40
Art. No. 714.91.20
P/Qty 1
Art. No. 714.05.10
P/Qty 1
Basin Wrench
• Chrome-vanadium steel, hardened. • Jaws and tooth area induction hardened and polished. • PVC sleeved handles. • Easy one handed adjustments. • Self-clamping on pipes and nuts.
• For 15 mm & 22 mm nuts. • Double ended for restricted spaces.
Art. No. 714.05.11
P/Qty 1
L mm 180 250 400
mm 1/8 - 1 1/8 - 1 1/8 1/8 - 2 1/2
mm Art. No. P/Qty 10 - 30 715.02.33 10 - 36 715.02.23 1 10 - 65 715.02.34
CALL NOW! 0870 950 2800 FOR FURTHER DETAILS.
47