S030 210 x 195 customer catalogue.qxp
26/11/2008
Nylon Frame Anchor
ANCHORS
Rot proof nylon sleeve and cone. Captive expansion cone. Yellow chromate. screw. Pozi No. 3 head. Suitable for use with UPVC and metal frames. • Colour caps available.
Ø mm 8 8 8 10 10 10 10
Art. No. 9101.8.100 9101.8.120 9101.8.140 9101.10.80 9101.10.100 9101.10.120 9101.10.140
Page 48
Wall Fixings
• • • • •
L mm 100 120 140 80 100 120 140
11:54
P/Qty 100 100 100 100 100 100 50
• Master Frame attachment fixing with single spreading zone and special plug screw. • Frame Fixing Type WE. • Material: Screw; steel zinc plated / yellow chromated. Plug; ultramid B3S (high quality nylon). • Suitable for fixing into concrete, tiles, limestone etc. • Countersunk head. • Drive: Pozi No.4. Sit 40 (enclosed in box). • Single spreading plug. • Resistant to weather, rotting, ageing and chemical influences. • Unaffected by temperature: -40°C to +100°C.
Cover Caps
• Available for flat assembly countersunk flush or as overlapping for assembly with out countersinking. • Colour: white, light brown or dark brown.
Cross-recessed Head Z (PZD) No. 4 Plug Ø x L mm 10 x 100 10 x 115 10 x 135 10 x 160
Screw Ø x L mm 7 x 105 7 x 120 7 x 140 7 x 165
Art. No. 912.110.100 912.110.115 912.110.135 912.110.160
P/Qty 50 50 50 50
Nylon Dowels
• Material: Nylon (Polyamide). • Greater flexibility provides a securer fixing into a variety of substrates. • Particularly suitable with Wüpofast chip board screws. • Fully resistant to weathering, rotting & ageing. • Resistant to chemical influences. • Unaffected by temperature: -40°C to 100°C. • Every dowel is marked with hole Ø appropriate to it.
Dimensions Screw Min. hole Ø x L mm Ø mm depth mm 5 x 25 2.6 - 4 29 6 x 30 3.5 - 5 35 8 x 40 4.5 - 6 40 10 x 50 6.0 - 8 58 12 x 60 8.0 - 10 70 14 x 75 10 - 12 87
Art. No. 903.5..25 903.6..30 903.8..40 903.10.50 903.12.60 903.14.75
Hammer Fix
• Material: Drive screw; Steel zinc plated & yellow passivated (min. 5µ). Plug body; rot proof (nylon polyamide 6). • Countersunk head for flush fitting. • Pre-assembled ready to use.
Countersunk Head Sit Drive 40 Flat Overlapping Colour Art. No. Art. No. P/Qty White 590.610.001 590.610.021 Light brown 590.610.023 100/ 1000 Dark brown 590.610.004 590.610.024
Go to page 53 for our full range of masonry drill bits. 48
Plug Ø x L mm 10 x 100 10 x 115 10 x 135
Screw Ø x L mm 7 x 105 7 x 120 7 x 140
Art. No. 912.510.100 912.510.115 912.510.135
P/Qty 50 50 50
NEXT DAY DELIVERY -
on orders placed before 3pm.
Ø x L Max. clamping mm thickness mm Art. No. 5 x 30 10 9031.75.301 5 x 50 25 9031.75.501 6 x 40 15 9031.76.401 6 x 50 25 9031.76.501 6 x 60 35 9031.76.601 6 x 70 45 9031.76.701 8 x 60 15 9031.78.602 8 x 80 35 9031.78.802 8 x 100 55 9031.78.1002 8 x 120 75 9031.78.1202 8 x 140 95 9031.78.1402 1 = Pozi 2 Drive for removal 2 = Pozi 3 Drive for removal
www.winzerwurth.co.uk CALL NOW! 0870 950 2800 FOR FURTHER DETAILS.
P/Qty 100 100 100 100 100 100 100 100 50 50 50
26/11/2008
Chemical Anchor System • • • • • • • • •
Shut off valve to avoid waste. Economical to use. Resistant to dynamic loads. Stress free fixing. Versatile: suitable for solid or hollow applications. High tensile strength when set. Re-sealable tube. No special tools required (150ml version). Suitable for hollow materials - remedial wall tiles, wall plates, brackets and fabricated stairways; solid materials - railings / balustrades, reinforcing rods, retaining masonry facades using threaded rod; services - pumps, fans, vibration proof fixing of motors, radiators.
The Chemical Anchor System has been developed to enable the bonding of awkward fixings and problematic materials. The cartridge design keeps the resin and catalyst separate until they are dispensed through the static mixer nozzle. The polyester resin has been chosen for ease of application and high tensile strength when set.
11:55
Page 49
Cut Studs for Chemical Anchor • Material: steel 4.8 bright zinc plated. • Complete with nut and washer.
Thread Ø M8 M10 M12 M16
Hole Ø x L mm 10 x 110 12 x 130 14 x 160 18 x 190
Art. No. 905.410.008 905.410.010 905.410.012 905.410.016
P/Qty 100 100 50 25
Resin Capsules
• Used to provide a high strength fixing where mechanical expansion type anchors are not suitable. • Stress free anchoring for close to edge locations and in proximity to other fixings. • Suitable for structural fixings, hand rails, balustrades, safety barriers, light to heavyduty loadings. • Can be used in wet conditions.
Chemical Anchor Start-Up Kit
• Contains all components except cut studs. • All packed in a site box Art. No: 955.903.680 • Contents: 10 x 380ml Resins with Nozzles 10 x Nozzles 2 x Brushes 1 x Blow out pump 1 x Chemical resin application gun
Min. hole depth mm 80 90 110 125 170
Anchor Ø x L mm 10 x 80 12 x 85 14 x 95 18 x 95 25 x 160
Art. No. 905.408 905.410 905.412 905.416 905.420
P/Qty 10 10 10 10 5
Studs
• Studs for use with resin capsules. • Come complete with hex drive for ease of setting in resin capsules. • Can be used with chemical anchor system.
Zinc plated
Description Art. No. Cartridge 380 ml 9031.380.99 Cartridge 300 ml 9031.300.99 Gun for 380 ml cartridge 9031.10 Static Mixer Nozzle 9031.380.991
P/Qty 1/12 1 1 1
Thread Ø M8 M10 M12 M16 M20 Art. No. 9031.380.BOX
Anchor Ø mm 10 12 14 18 25
Art. No. 905.410.08 905.410.10 905.410.12 905.410.16 905.410.20
P/Qty 10 10 10 10 10
P/Qty 1
CALL NOW! 0870 950 2800 FOR FURTHER DETAILS.
49
ANCHORS
S030 210 x 195 customer catalogue.qxp
S030 210 x 195 customer catalogue.qxp
26/11/2008
ANCHORS
Heavy Duty Shield Anchor Hex Nut
• Steel yellow zinc plated. • The shield anchor hex nut is a threaded expansion anchor for fixing into masonry and concrete. Allows fixtures to be placed over the stud, ideal for wall fixings. • Suitable for reinforcement, bracketry, lift guide rails, wall plates, hooks, eyes, lightening supports.
Anchor Max. Thread Ø x L fixture Ø mm L mm Art. No. P/Qty M6 12 x 45 25 9052.106.25 50 M8 14 x 50 15 9052.108.15 50 M8 14 x 50 40 9052.108.40 50 M10 16 x 60 30 9052.110.30 50 M10 16 x 60 50 9052.110.50 25 M10 16 x 60 70 9052.110.70 25 M12 20 x 75 70 9052.112.70 10 Order length by maximum thickness of material to be clamped down.
Shield Anchor
• A torque controlled Shield Anchor suitable for use in concrete and solid brick. • Steel Yellow Zinc Plated. • For use with bolts M8, M10 & M12 (not supplied).
11:55
Page 50
Heavy Duty Shield Anchor Hex Bolt
• Steel yellow zinc plated. • The Shield Anchor is an internally threaded expansion anchor for fixing into masonry and concrete. • Ideal for floor fixing where heavy objects can be slid into place once the shield is in the hole. • Suitable for racking, storage, machinery, sole plates, cable trays, stadium seating, pipework.
Anchor Thread Ø x L Ø mm M6 12 x 45 M6 12 x 45 M8 14 x 50 M8 14 x 50 M8 14 x 50 M10 16 x 60 M10 16 x 60 M10 16 x 60 M10 16 x 60 M12 20 x 75 M12 20 x 75
Max. fixture L mm 10 25 10 25 40 10 25 50 75 10 25
50
Anchor ØxL mm 14 x 45 16 x 60 12 x 75
Max. fixture L mm 50 65 85
Art. No. 9053.208 9053.210 9053.212
P/Qty 50 50 25
Art. No. P/Qty 9051.306.10 50 9051.306.25 50 9051.308.10 50 9051.308.25 50 9051.308.40 50 9051.310.10 50 9051.310.25 50 9051.310.50 50 9051.310.75 25 9051.312.10 25 9051.312.25 25
Order length by maximum thickness of material to be clamped down.
Wire Hanger For Concrete
Min. hole depth mm 40
Anchor Ø x L mm 6 x 55
• Bright zinc plated. • The Thru-Bolt Anchor is a torque controlled anchor where the hole size is the same as the bolt. It has a 360° hole contact and with its angled barb it ensures setting even when the anchor is not fully tightened. • Suitable for racking, machinery, hand rails, balustrade, wall plates, safety fences, crash barriers, industrial doors, light structures, stadium seating, fabricated stairways.
Art. Prefix. 9041...
• Steel yellow zinc plated. • Suitable for suspended ceilings & lightweight signs.
Thread Ø M8 M10 M12
Thru-Bolt Concrete Anchor
Art. No. 9042.06.55
Sleeve Anchor Hex Bolt
• Steel yellow zinc plated. • For fixing to concrete, brickwork, concrete block. • Suitable for hand rails, signs, balustrades, gates, support brackets, battens, railings.
Thread Ø M6 M8 M8 M8 M10 M10 M10 M12
Anchor ØxL mm 8 x 70 10 x 55 10 x 80 10 x 100 12 x 65 12 x 80 12 x 100 16 x 110
Max. fixture L mm 30 10 35 60 10 25 45 55
P/Qty 100
CALL NOW! 0870 950 2800 FOR FURTHER DETAILS.
Art. No. P/Qty 9055.206.70 50 9055.208.55 50 9055.208.80 50 9055.208.100 50 9055.210.65 50 9055.210.80 50 9055.210.100 25 9055.212.110 10
26/11/2008
Sleeve Anchor Hex Nut
• Steel yellow zinc plated. • For fixing to concrete, brickwork, concrete blocks. • Suitable for hand rails, signs, balustrades, gates, support brackets, battens, railings.
Thread Ø M6 M8 M8 M8 M10 M10 M10 M12 M12
Anchor ØxL mm 8 x 40 10 x 50 10 x 75 10 x 100 12 x 60 12 x 75 12 x 100 16 x 65 16 x 110
Max. fixture L mm 8 10 35 60 15 20 50 15 55
Art. No. P/Qty 9057.206.40 100 9057.208.50 50 9057.208.75 50 9057.208.100 50 9057.210.60 50 9057.210.75 50 9057.210.100 25 9057.212.65 25 9057.212.110 10
Drop-In Anchors
• A deformation controlled Drop-In Anchor suitable for use in concrete over 20 N/mm. • THIS ANCHOR MUST BE INSTALLED USING THE CORRECT SETTING PUNCH.
Thread Ø M6 M8 M10 M12 M16
Anchor ØxL mm 8 x 25 10 x 30 12 x 40 15 x 50 20 x 65
Internal. thread L mm 9 12 16 18 22
Art. No. 904.106 904.108 904.110 904.112 904.116
Setting Tool: Thread Ø M6 M8 M10 M12 M16
Art. No. 904.06 904.08 904.010 904.012 904.016
P/Qty 100 100 50 50 25
11:56
Page 51
Pan Head TX Drive:
Brass Dowels
• Material: Brass. • Metric internal thread. • Tapered internally for maximum spreading by screw. • Knurled exterior for extra grip. • Suitable for use in; Concrete, solid stone, natural stone, solid brick, solid timber & laminated timber. • Can be used for “Through insertions”.
Ø x L mm Hole Ø mm Art. No. 7.5 x 50 6 901.175.051* * TX Drive Bit Art. No: 614.313.0
P/Qty 100
Hex Head Bolt: Ø x L mm 10 x 70 10 x 80 10 x 100 12 x 80 12 x 100 12 x 140
Hole Ø mm 8 8 8 10 10 10
Art. No. 901.011.001 901.011.002 901.011.003 901.011.201 901.011.202 901.011.204
P/Qty 100 100 100 100 100 100
Hole Ø mm Art. No. 6 901.375.070
P/Qty 100
Stud Screw: Thread Ø x L Ø mm M8 10 x 30 M10 12 x 34
Hole Ø mm 10 12
Screw Anchor
Ø x L mm 7.5 x 70 Art. No. 904.38 904.310
P/Qty 100 100
• Works by cutting own thread in pre-drilled substrate. • Zinc plated steel. • Can be used in concrete ú 25N/mm2. • Can be used in pressure-resistant natural stone, (e.g. granite), solid brick, hollow blocks, lightweight blocks. • Balancing thread at end to assist cutting of thread. • Suitable for fixing metal structures, metal profiles, foot plates, brackets, rails, beams, purlins, pipelines, ventilation ducts, coreboring equipment. • Anchoring suspended ceilings. • Not suitable for moist rooms in a chlorinated atmosphere.
Blow Out Pump
• For removing dust from holes before anchors are inserted, used with cleaning brushes.
Art. No. 9031.11
P/Qty 1
Cleaning Brushes
• For removing dust from holes prior to inserting anchors. Used in conjunction with Blow Out Pump.
Hole Ø mm 8 10 12 16 20
Art. No. 903.990.008 903.990.010 903.990.012 903.990.016 903.990.020
CALL NOW! 0870 950 2800 FOR FURTHER DETAILS.
P/Qty 1 1 1 1 1
51
ANCHORS
S030 210 x 195 customer catalogue.qxp
S030 210 x 195 customer catalogue.qxp
26/11/2008
Plastic Expansion Plugs
ANCHORS
• • • •
Material: Polypropylene (rot proof). Colour coded sizes. Profiled body for extra grip. Suitable for sound brickwork & concrete etc.
Colour Yellow Red Brown
Drill size mm 5 6 7
Screw L mm 3 - 3.5 3.5 - 5 5-6
Art. No. 9032.67.1 9032.67.2 9032.67.3
P/Qty 100 100 100
Shark Dowels
• Universal dowel for minor fixing of articles to almost all building materials: solid brick, cavity blocks, plasterboard, chipboard, plywood. • Without collar = pearlised red. With collar = pearlised white. • For use with fully threaded Wüpo, Ecofast & Assy screws. • Pre-moulded thread in the head. • Outer “wings” prevent twisting in solid or cavity walls or boards, the dowel will “knotup” securely, providing a quick and easy, economic solution to fixing to a cavity substrate. • For through fixing use “Red (without collar)”. • Resistant to weathering, rotting & ageing. • Temperature resistant: -40°C to +100°C.
Colour Red White Red White
52
Dimensions Screw Ø x L mm L mm Art. No. P/Qty 6 x 36 4.5 906.006.36 100 6 x 37 4.5 906.006.37 100 8 x 51 6 906.008.51 200 8 x 52 6 906.008.52 200
11:56
Page 52
Plasterboard Screw Fixing
• Ideal for fixing into plasterboard, lightweight building board and lightweight concrete. • For wood/chipboard screws. • No drilling required. • Direct anchorage into the substructure. • Suitable for use in moist areas in combination with stainless steel screw. • Thread is cut into the soft substructure with perfect contact. • Corrosion resistant. • For screw sizes: Synthetic - Ø 4.5 to 6 mm Die cast zinc - Ø 5 mm. • Suitable for use in the electrical sector for the attachment of cable ducts, panels, fuse boxes, cable clamps, lighting strips, lights, sockets etc, in the sanitary sector for attaching pipe clamps, panels, mirrors etc and for the attachment of internal fittings such as lightweight cupboards, curtain rails, pictures etc. • Available in synthetic nylon or die cast zinc.
Description Synthetic Die cast zinc
Dimensions Ø x L mm 14.5 x 33 14.5 x 33
Art. No. 903.251 903.252
P/Qty 200 200
Cavity Dowels
• Can be fitted with screw driver or setting pliers. • Gives a high strength fixing in plasterboard ideal for hanging cupboards, radiators, etc. • Complete with screw.
Dowel Screw Clamping Hole L mm L mm Range mm Ø mm Art. No. 33 38 5 - 13 6.5 903.41 46 52 8 - 20 6.5 903.4.461 37 50 5 -1 3 10 903.55.371 52 60 8 - 20 10 903.55.521 34 50 5 - 13 11 903.56.372 52 60 8 - 20 11 903.56.522 65 70 20 - 40 11 903.56.652 1 = combination drive slot and phillips No. 2. 2 = combination drive slot and phillips No. 3.
Assortment:
P/Qty 100 100 100 100 100 100 100
• Contents: 903.4 x 100, 903.55.37 x 50, 903.56.37 x 50, complete with screws, 1 x manual fitting pliers. Art. No. 964.903
Manual Assembly Pliers
Art. No. 903.20
www.winzerwurth.co.uk CALL NOW! 0870 950 2800 FOR FURTHER DETAILS.