S050 210 x 195 Customer Catalogue.qxp
26/11/2008
Holesaw HSS Bimetal
• Bimetal construction allows fast clean cuts. • Cutter depth 32mm (all sizes). • Teeth per inch: 6. • Suitable for use on: all steel materials including cast iron, copper, bronze, aluminium, plastic and wood. • Ø from 14 to 127 mm. Art. Prefix. 632....
Assortment
P/Qty 1
• Contents: Ø 19, 22, 25, 32, 35, 38, 44, 51, 57, 64, 67, 76 mm. Art. No. 964.632
Replacement Hub and Drill for Cutters • Ø 14 to 30 mm. • Shank Ø: 6.35 mm. • Complete with pilot drill.
12:37
Page 65
Replacement Hub and Drill for Cutters • Ø 32 to 152 mm. • Hexagonal shank Ø: 11 mm. • Complete with pilot drill.
LUBRICANTS, CLEANERS, VEHICLE CARE SEALANTS, ADHESIVES, FINISHES PLUMBING ANCHORS DRILLING
Art. No. 632.02
SAWING
P/Qty 1
Pilot Drill
ABRASIVES WOOD SCREWS, DRY WALL SCREWS, PINS, CAPS
• For hub 32 to 152 mm. • Ø 6.35 mm.
WINDOW SCREWS, PIAS, PIASTA MACHINE SCREWS, BOLTS, SET SCREWS, NUTS, WASHERS
Art. No. 632.014
P/Qty 1
SELF TAPPERS, WING PIAS, RIVETS
Ejector Spring
DOORS
• Placed inside the cutter, over the drill bit, the spring ejects cut out debris from inside the cutter.
HINGES DRAWER RUNNERS FURNITURE FITTINGS, FIXTURES & ACCESSORIES
Art. No. 632.07 Art. No. 632.04
P/Qty 1
Pilot Drill
• For Hub 14 to 30 mm. • Ø 6.35 mm, long type.
Art. No. 632.014.1
P/Qty 1
KNOBS, HANDLES, LOCKS, HARDWARE
Extension Bar
POWER TOOLS
• Length: 300 mm. • To be used in conjunction with 32 to 152 mm hub.
ORSY CASE SYSTEMS SCREWDRIVING TOOLS, PLIERS, CLAMPS
P/Qty 1
Art. No. 632.05
P/Qty 1
MEASURING EQUIPMENT, WOOD & GENERAL TOOLS WORKSHOP & SAFETY EQUIPMENT
CALL NOW! 0870 950 2800 FOR FURTHER DETAILS.
65
S050 210 x 195 Customer Catalogue.qxp
26/11/2008
HSS Bimetal Hacksaw Blades
• Flexible blade made of high alloy/ high speed steel. • The teeth are made of fully hardened steel and are welded with electron beams in a vacuum.
12:38
Page 66
Metal Hacksaw
• Complete saw assembly with Zebra Bimetal blade. • Ergonomic soft grip handle. • Light weight - high strength frame.
Standard tooth pattern
• Multi purpose blade suitable for most common building materials. • Progressive tooth pattern: cuts thick and thin materials. • Fast cut without splintering the material. • Top quality long life expectancy.
Metal
• • • • •
SAWING
More economical. Greater safety (less shattering). High cutting capacity. Longer service life. Suitable for use on tool steel (high and low alloy), structural steel (high and low steel), high speed steel, stainless steel. • Dimensions: 0.65 x 13 x 300 mm.
Multi Blade Jigsaw Blades
Length mm 390
Art. No. 714.64.015
Pack/Qty 1
Tooth L mm Tooth pattern Art. No. 75 1.0 - 3.0 608.116.123
P/Qty 1/5
Wood
Saw Blade Handle Material thickness mm Teeth Over 2 mm 24 Up to 2 mm 32
• For standard saw blade, adjustable.
Art. No. 603.300.13 603.300.133
Progressive Tooth Pattern 32/18 tpi
P/Qty 10/50 10/50
• Universally suitable. • High tooth pitch in the starting cut area makes it easy to begin cuts. Flexing of thin materials is substantially reduced. • Low tooth pitch across the reminder of the blade provides for a high metal cutting capacity. • Optimum chip removal. • Longer service life. • Suitable for use on thin sheet steel, tools steel (high and low steel), high speed steel, stainless steel. • Dimensions: 0.65 x 13 x 300 mm.
Art. No. 713.64.04
Tooth L mm Tooth pattern Art. No. 105 2.65 - 5.0 608.116.345
P/Qty 1
• Material: Steel, nickel plated. • Length: 250 mm.
Description Mini hacksaw
Art. No. 609.1
66
Description Mini hacksaw blade
Art. No. 609.2
P/Qty 1/5
Suitable areas and cut depths into different materials:
Mini Hacksaw
P/Qty 1
• Specially for metals. • 32 tpi. P/Qty 10/50
P/Qty 1/5
Universal
Universal Mini Hacksaw Blade Art. Prefix. 603.301.13
Tooth L mm Tooth pattern Art. No. 90 1.75 - 2.8 608.116.234
P/Qty 12
Art. No: 608.116.123 Multi Blade Metal: - Metal, sheet metal - Non-ferrous metal - Stainless steel - Plastic - Fibre glass GRP Art. No: 608.116.234 Multi Blade Wood: - For straight, fine, splinter free, precision cut in thin or thick Art. No: 608.116.345 Multi Blade Universal: - Metal, non-ferrous metal, aluminium - Wood with nails, chipboard, glued wood - Plastic
CALL NOW! 0870 950 2800 FOR FURTHER DETAILS.
2.0 - 10 mm 2.0 - 20 mm 1.5 - 3.0 mm 1.5 - 30 mm 1.0 - 2.0 mm
1.0 - 80 mm
3.5 - 10 mm 3.5 - 10 mm 2.0 - 30 mm
CALL NOW! 0870 950 2800 FOR FURTHER DETAILS. -
-
-
615.275.40
-
-
-
608.116.008
-
-
-
615.075.30 615.075.25
615.050.20
615.075.30
-
615.050.20 615.050.15
615.075.30
-
615.075.25
608.115.95
608.116.102
608.116.104
-
-
608.116.104
608.116.104
-
-
608.116.008
615.275.40
608.116.102
608.116.099 608.116.008
-
608.116.099
608.116.008
-
-
615.075.25
608.116.008
-
-
608.115.95
-
608.115.92
-
608.116.007 608.115.93
-
-
608.116.007
608.115.93 615.250.14 615.250.10
615.050.20
608.115.92
608.116.112
-
608.115.95
-
608.116.104
608.115.90 608.115.89
608.116.105
608.116.105
608.116.008 608.116.105 608.116.006
615.250.14 615.250.10
-
608.116.105 608.116.006 608.116.008
615.075.40
608.116.102 608.115.89
608.116.102 608.115.92
SAWING
-
608.115.95 608.115.96
608.115.95
608.116.112
608.115.95 608.116.008
608.116.104
608.115.92
Leather, cardboard, rubber, carpet, Styropor insulating material.
Brick, glass, ceramic
Asbestos fibre glass reinforced plastic
Plexiglas
PVC plastic in general
Sandwich material 608.116.106
608.116.009
608.116.103
608.116.103
-
Brass/bronze
Aluminium
608.116.104
608.116.009
608.116.006 608.116.106 615.275.40
Stainless steel
615.250.14 615.050.10
-
608.116.009 615.050.12
Metal, sheet metal
Steel, mild steel
608.115.93 615.050.12
615.050.12
608.115.93 608.116.106 615.250.14
615.050.12
Wood with nails
Glued wood
608.115.90
608.116.100
615.075.25
Plywood
608.115.92 608.116.102
608.116.112 608.116.103
615.075.40
Plastic laminated wood fibre
608.116.111
608.116.112
Wood fibre boards
608.115.90 615.275.40
Your W端rth Guide To The Right Jig Saw Blade
615.050.20
608.115.92
608.115.92
615.075.40
608.116.102
608.116.112 608.116.111
608.116.102
608.115.90
Hardwood, softwood, wood fibre boards
606.115.92 608.115.90
12:38
615.050.12 615.050.15 615.050.20
-
615.075.40
-
-
608.116.112
608.116.100 608.116.112 608.116.103
608.116.100 608.116.112 608.116.103
26/11/2008
615.050.20 615.050.12
615.075.25 615.075.40 615.050.20
615.075.25 615.075.40
615.050.15
608.116.111 608.116.112
608.115.89
615.075.25
608.115.90 608.115.89
608.115.92
608.115.92 608.115.89
608.115.90
608.115.91 608.116.099
Bimetal
608.115.91 608.075.40 608.115.90
Fast Cutting
615.075.25 615.075.40
Coarse Cutting 608.115.90 608.115.91 608.115.89
Fine Cutting 608.115.92 608.116.102
Thin Material
608.115.92 608.116.111 608.116.112 608.115.89
Thick Material
608.116.099 608.115.91
Curved Cut
608.115.91 608.115.89 608.115.90
Straight Cut
615.075.25 615.075.40
S050 210 x 195 Customer Catalogue.qxp Page 67
How to find the right jig saw blade quickly: The horizontal column will show the material to be cut; the vertical column - the specific application. The W端rth article number shown in the appropriate box leads you to the jig saw blade best suitable for the job.
67
Page 68
Tooth Length mm
Blade Thickness mm
Blade Thickness mm
2,0
76,5
50,0
1,00
2,0
76,5
50,0
1,00
76,5
608.116.106
1=5
1,2
132,0 105,0 1,00
HCS crossed608.116.099
132,0 110,0 1,00
1=5
2,0
608.115.94*
1=5
1,2
608.116.008
1=5
3,0
608.116.009* 1=5
615.050.12 615.050.15
76,5
1,00
1=5
608.116.1031 1=5
608.116.102
2,0
608.116.105
50,0
Overall Length mm
Tooth Length mm
1,00
Tooth Pitch mm
Overall Length mm
50,0
HCS Sharpened & crossed
Tooth Pitch mm
76,5
1=5
50,0
1,00
100,4 75,0
1,00
3,0
100,4 75,0
1,00
1=5
3,0
100,4 75,0
1,00
1=5
1,2
76,5
1,25
1=5
1,5
76,5
50,0 90,0
1,00
1=5
3,0
100,4 75,0
1,00
608.116.1134 1=5
4,0
100,4 69,0
1,25
608.115.91
1=5
4,0
100,4 75,0
1,00
608.116.100
1=5
4,0
100,4 75,0
1,00
*A 608.116.104
1=5
3,0
100,4 75,0
1,00
608.115.92 608.115.90
1=5 1=5
2,5 4,0
100,4 75,0 100,4 75,0
1,00 1,25
608.115.89
1,00
1=5
4,0
117,0 90,0
608.116.1123 1=5
1,3
76,5
608.116.1112 1=5
50,0
1,00
2,5
100,4 75,0
1,00
615.050.20
1=5
2,0
76,5
50,0
1,00
*B
615.075.30
1=5
3,0
100,4 75,0
1,00
615.075.30
1=5
3,0
100,4 75,0
1,00
*C
615.075.40
1=5
4,0
100,4 75,0
1,25
1,00
*D
615.075.25
1=5
2,5
100,4 75,0
1,00
*F
615.275.40
1=3
4,0
100,4 75,0
1,25
*G
608.115.95
1=1
N/A
615.250.10
1=3
1,0
76,5
50,0
615.250.14
1=3
1,4
76,5
50,0
1,00
615.275.40
1=3
4,0
100,4 75,0
1,25
*A - HSS Crossed & conically ground *B - Zebra HSS Bimetal crossed
68
0,7
HCS sharpened & conically ground
HSS Wavy HSS Crossed Zebra HM bimetal ground
*B
1=5
Jig Saw Blades for use with Wood and Soft Plastic
608.116.006
*A 608.116.104 Zebra HSS bimetal wavy
SAWING
608.116.007
P/Qty
Article. No.
Jig Saw Blades for use with Metal and Hard Plastic
P/Qty
12:39
Article. No.
26/11/2008
HCS
S050 210 x 195 Customer Catalogue.qxp
*A *B *C *D *E *F *G 1= 2= 3= 4=
HSS crossed & conically ground HSS Bimetal crossed HSS Bimetal sharpened & crossed HSS Bimetal sharpened & conically ground HSS Bimetal crossed & sharpened Tungsten carbide bimetal ground Tungsten carbide steel coated Specially suitable for cutting curves Reversed cutting direction Point teeth Additional teeth at the back for cutting curves
CALL NOW! 0870 950 2800 FOR FURTHER DETAILS.
76
54
1,00
S050 210 x 195 Customer Catalogue.qxp
26/11/2008
12:40
1=5
3.6-5.1 150 5-7 tpi 6”
1.25
608.030.21
1=5
4.0 6 tpi 4.0 6 tpi 5.0 5 tpi 3.6-5.1 5-7 tpi 1.0 24 tpi 1.0 24 tpi 1.4 18 tpi 1.4 18 tpi 1.8 14 tpi 1.8-2.6
1.25
608.030.22
1=5
608.030.25
1=5
615.830.040
1=5
615.910.010
1=5
615.915.010
1=5
615.910.014
1=5
615.915.014
1=5
615.915.018 1=5 615.915.026 1=5 615.922.814 1=5 615.922.818 1=5 615.922.826 1=5 615.930.526 1=5 615.730.512 1=5
NEW!
615.745.512 1=5 Sabre Saw Blade Table Abbreviations Guide: 1 = Particularly well suited O = Suitable X = Application Wood Metal
A= B= C= D= E= F= G=
1.25
Hardwood, softwood Wood fibre boards Fibre boards with synthetic coating
Plywood Glued wood
1.25
Wood with nails Wood with metal Window construction
E
F
615.922.826
615.930.526
615.922.818 D
615.922.814 C
615.915.026
615.915.018
615.915.010 A
** 615.910.014/015 B
615.910.014
615.910.010
615.830.040
608.030.025 G
G
608.030.022
608.030.21
O 1 1 O 1 1 1 1 O 1 1
1
1 1 1
1
1 1
Thin sheet metal Thick sheet metal
1 1 1 1
0.9
Sheet metal profiles and pipes
1 1 1 1
Metal profiles and pipes
1 1 1 1 1 O O O O O 1 O O 1 1 O O O O O 1 O O 1 1
0.9
Aluminium Non ferrous metal Metal pipes
0.9
Steel pipes, cast iron pipes
0.9
Sandwich material
0.9
Pallets Porous concrete
0.9 0.9 1.5 1.5
Longer version of 615.910.010 Longer version of 615.910.014 Longer version of 615.915.014 Longer version of 615.915.018 Longer version of 615.915.026 Longer version of 615.922.826 With sharpened teeth
1 1 1
1 1 1 1
Drywall Fibre cement Bricks PVC, general synthetics Asbestos cement, fibreglass,reinforced synthetics
Straight cut Curved cut Plunge cut Flexible and break proof for flush cuts
Perpendicular cut Ripe vise Fine cut Rough cut Fast cut
O O 1 1
1
0.9
0.9
O O 1 1
1 1
Green wood
1.50
0.9
**
1 O 1
SAWING
615.815.030
305 12” 150 6” 240 10” 305 12” 100 4” 150 6” 100 4” 150 6” 150 6” 150 10-14 tpi 6” 1.4 228 18 tpi 9” 1.8 228 14 tpi 9” 1.8-2.6 228 10-14 tpi 9” 1.8-2.6 305 10-14 tpi 12” 12.7 305 2 tpi 12” 12.7 455 2 tpi
615.815.030
Thickness in mm
Overall Length in mmand inch
Tooth spacing in mm and inch
P/Qty
***
615.745.512
Wood
Sabre Saw Blade Application Guide 615.730.512
**
Metal
**
Material *** Quality Article. No.
Sabre Saw Blades
Page 69
1
X X X X X X X X X X X X X X X X X X X X X X X X X X
X X
X X X X
X
X X X X X X
CALL NOW! 0870 950 2800 FOR FURTHER DETAILS.
69
S050 210 x 195 Customer Catalogue.qxp
26/11/2008
SAWING
Rough Circular Saw Blades
• For quick cutting when separating and blocking wood • The universal saw blade for the construction site; makes cuts in the widest variety of wooden materials. • Tooth shape: alternating tooth (AT) with small angle of +5°. • Suitable for use with mitre saws, panel saws and table circular saws. • Materials: hard and soft woods, particle boards (raw, coated, veneered), cover boards. Dimensions mm No. of teeth Art. No. P/Qty 250 x 3.2 x 30 24 611.025.241 1 300 x 3.2 x 30 28 611.030.281* 1 * = with driving holes
Standard Circular Saw Blades
• For lengthwise and cross cut. • Tooth shape: alternating tooth (AT). • Suitable for use with bench, trimming, cross-cut and panel circular saws. • Materials: soft and hard wood, coated and veneered particle board.
Dimensions mm No. of teeth 250 x 3.2 x 30 40 250 x 3.2 x 30 60 300 x 3.2 x 30 48 350 x 3.2 x 30 54 400 x 3.5 x 30 60 * = with driving holes
Art. No. P/Qty 611.025.401 1 611.025.601 1 611.030.481* 1 611.035.541* 1 611.040.601* 1
High row of teeth Dimensions mm No. of teeth Art. No. P/Qty 250 x 3.2 x 30 80 611.025.801 1 300 x 3.2 x 30 96 611.030.961* 1 * = with driving holes
70
12:41
Page 70
Triple Chip Circular Saw Blades
• For non-fferrous metals and wood. • For parting and mitre cuts. • Suitable for use with bench and trimming circular saws1 and mitre saws2. • Tooth shape: trapeziodal tooth/flat tooth (TT/FT). • Materials: Positive rake blades: softwood, hardwood, fine cutting. Negative: rake blades: aluminium, non ferrous metal alloys and plastics. • Design: Positive rake angle for lighter feed. Negative rake angle, especially suitable for thin-walled aluminium profile. Due to the negative shape, the workpiece is not drawn into the saw blade, but instead provides slight resistance and can therefore be better guided by hand. Dimensions mm No. of teeth 250 x 3.5 x 30 80 300 x 3.2 x 30 96 250 x 3.2 x 30 80 300 x 3.2 x 30 72 300 x 3.2 x 30 96
1 2
Art. No. P/Qty 611.025.8021 1 611.030.9621 1 611.025.8032 1 611.030.7232 1 611.030.9632 1
= Positive rake blades = Negative rake blades
Circular Saw Blades
• Universal for mobile use. • For lengthwise and cross cuts. • Suitable for use with circular saw. • Tooth shape: Alternating tooth (AT). • Materials: Soft and hard wood, board materials unfinished, plastic coated or veneered.
Dimensions mm No. of Teeth Art. No. P/Qty 190 x 2.8 x 30 24 610.190.243 1 210 x 2.8 x 30 64 610.210.600 1
Reduction Rings for Circular Saw Blades Ext. Ø Int. Ø Thickness mm mm mm 30 15 2 30 20 2 30 25 2
Art. No. 611.861.107 611.861.113 611.861.116
P/Qty 1 1 1
UNI-Top Circular Saw Blades
• One blade for any job. • The universal circular saw blade for the construction site; makes clean cuts in the widest of materials. • Suitable for use with hand held circular saws, mitre saws and table circular saws. • Tooth shape: Alternating tooth (AT) with small angle of -5°. • Materials: hard and soft woods, particle boards (raw, coated, veneered), cover boards, plastics, composites and non-ferrous metals (aluminium, copper, and brass). Dimensions mm No. of Teeth 150 x 2.8 x 20 24 160 x 2.8 x 20 24 180 x 2.8 x 30 30 190 x 2.8 x 30 30 200 x 2.8 x 30 30 210 x 2.8 x 30 34 230 x 2.8 x 30 34 240 x 2.8 x 30 42 250 x 3.0 x 30 42 300 x 3.2 x 30 48 300 x 2.4 x 25.4 60
Art. No. P/Qty 611.615.024 1 611.616.024 1 611.618.030 1 611.619.030 1 611.620.030 1 611.621.034 1 611.623.034 1 611.624.042 1 611.625.042 1 611.630.048 1 611.630.061* 1
* Specially for Jepson 25.4 (1”) bore.
A full range of workshop and safety equipment available. See pages 210-236.
CALL NOW! 0870 950 2800 FOR FURTHER DETAILS.