Catalogue - Abrasives by Würth UK Ltd.

26/11/2008

Zebra LONGLIFE Cutting Discs

• Synthetic resin-bound, fibre reinforced, high-performance cutting discs. • For freehand cutting work with electric or compressed air angle grinders. • Very low incidence of breakage. • Minimal measurement and imbalance tolerances. • Peripheral speed max. 80 m/s. • Discs meet the very high safety requirements of the European standard EN12413 and the OSA (Organisation for the safety of Abrasives). • Very long service lives. • Optimum cutting of solid materials and profiles. • Very high lateral stability.

LONGLIFE Cutting disc Blue for steel • Suitable for cutting work on solid materials, thick walled pipes, profiles, metal sheets, etc. 2 • 2 designs: 1

Ø x Thickness mm 115 x 2.5 125 x 2.5 180 x 2.5 230 x 2.5 300 x 3.5 * 300 x 3.5

Bore Ø mm 22.2 22.2 22.2 22.2 20.0 22.2

Art. No. 670.101.1521 670.101.2521 670.101.8022 670.102.3022 670.103.0232 670.103.0032

* max. working speed: 100 m/s (for use with petrol and electric cut-off machines)

P/Qty 25 25 25 25 10 10

12:25

Page 71

Zebra LONGLIFE Grinding Discs

LONGLIFE Cutting disc Yellow for non-ferrous metals / aluminium • Suitable for cutting work on cast-irons, solid materials, pipes, profiles, metal sheets, etc. • Design:

Ø x Thickness mm 115 x 2.5

Bore Ø mm 22.2

Art. No. 670.121.152

P/Qty 25

LONGLIFE Cutting disc Grey for stone

• Synthetic resin-bound, fibre-reinforced, high-performance grinding discs. • For freehand grinding with electric or compressed air angle grinders. • Very low incidence of breakage. • Minimal measurement and imbalance tolerances. • Max. peripheral speed 80 m/s. • Discs meet the high safety requirements of the European standard EN12413 and the OSA (Organisation for the safety of Abrasives). • An all-round harder disc. • Particularly long service life combined with good metal-removing properties.

LONGLIFE Grinding Disc Blue for steel • Suitable for grinding of edges, deburring, dressing of weld seams, etc • Design:

• Suitable for cutting work on stone, board, prefabricated components, bricks, tiles, clay pipes, roof tiles, clinker etc. 2 • 2 designs: 1

Ø x Thickness mm 115 x 2.5 125 x 2.5 180 x 2.5 230 x 2.5 300 x 3.5 *

Bore Ø mm 22.2 22.2 22.2 22.2 20.0

Art. No. 670.151.1521 670.151.2521 670.151.8032 670.152.3032 670.153.0232

P/Qty 25 25 25 10 10

Ø x Thickness mm 115 x 4.0 115 x 7.0 125 x 4.0 125 x 7.0 180 x 8.0 230 x 8.0

Bore Ø mm 22.2 22.2 22.2 22.2 22.2 22.2

Art. No. 670.161.154 670.161.157 670.161.254 670.161.257 670.161.808 670.162.308

P/Qty 25 25 25 25 10 10

* max. working speed: 100 m/s (for use with petrol and electric cut-off machines)

CALL NOW! 0870 950 2800 FOR FURTHER DETAILS.

ABRASIVES

S060 210 x 195 customer catalogue.qxp

26/11/2008

Page 72

“SPEED ” Cutting Discs

LONGLIFE Grinding Disc Yellow for non-ferrous metals / aluminium • Suitable for the grinding of cast-ons, casting skin and edges and preparing weld seams etc. • Design:

ABRASIVES

12:26

• Extremely high cutting capacity (very short cut-off times); very long service life. • Extremely thin for precise, virtually burr-and chatter free cutting (very clean and cool cutting surfaces). • Work requires minimal effort and helps to protect the user and the machine. • Minimal build-up of cutting waste and cutoff dust. • Low noise output and high break-resistance. • Specially designed for thin-walled pipes and profiles, thin metal sheets, car body sheets, etc.

SPEED Plus Cutting Disc Green for stainless steel • Suitable for cutting work on pipes, ventilation ducts, sheet metal, pipe systems, bars, steel reinforcements, profiles and rails (for bathrooms), cable trays, high-voltage cables, steel rope, composite materials, plastics, etc. • Free from iron, chlorine and sulphur (0.1%). • Meets KWU class II (e.g. for pipe system and reactor engineering). 2 • 2 designs: 1

SPEED Cutting Disc Blue for steel Ø x Thickness mm 115 x 7.0

Bore Ø mm 22.2

Art. No. 670.171.157

P/Qty 25

LONGLIFE Grinding Disc Green for stainless steel

• Suitable for cutting work on metal sheets, pipes, profiles, steel rope, reinforcing steel, etc. • Design: Ø x Thickness mm 76 x 1.0 115 x 0.8 115 x 1.0 115 x 1.6 125 x 2.0 180 x 2.0 230 x 1.9

• Suitable for grinding of edges, deburring, dressing of weld seams, etc. • Iron - Chlorine - and sulphur - free (0.1%). • Meets KWU class II (e.g.for pipe system and reactor engineering). • Design: Ø x Thickness mm 115 x 1.6 230 x 2.0

Ø x Thickness mm 115 x 7.0 125 x 7.0

Bore Ø mm 22.2 22.2

Art. No. 670.181.157 670.181.257

P/Qty 25 25

Bore Ø mm 22.2 22.2

Art. No. 664.101.151 664.102.302

P/Qty 25 25

Bore Ø mm 10.0 22.2 22.2 22.2 22.2 22.2 22.2

P/Qty 1 1/25 25 25 25 25 25

Arbour for 664.130.761 for use in Die Grinder L Shaft Ø For bore mm mm Ø mm 60 6 10

We supply a wide range of dust masks, eye and ear protection, etc. See pages 213-219

Art. No. 664.130.7612 664.131.1481 664.131.1502 664.131.1512 664.131.2502 664.131.8022 664.132.3012

CALL NOW! 0870 950 2800 FOR FURTHER DETAILS.

Art. No. 669.978

P/Qty 1

S060 210 x 195 customer catalogue.qxp

26/11/2008

Würth Cutting and Grinding Discs

• Synthetic resin-bound, fibre reinforced standard cut-off/rough grinding disc. • For freehand cutting/grinding work/with electric or compressed air angle grinders. • High break-resistance. • Max. peripheral speed 80 m/s. • Discs meet the very high safety requirements of the European standard EN12413 and of the OSA (Organisation for the safety of Abrasives).

12:26

Page 73

Roofers Diamond Blade

Würth Grinding Disc Blue for steel • Suitable for grinding of edges, weld seams and surfaces. • Medium-hard disc. • High-performance standard disc with very good specifications. • Design:

• Colour code: mauve. • Good cutting performance on both hard and abrasive materials combined with a long service life. • Improved heat dissipation. • Ideal for prolonged use. • Clean cutting. • Dry cutting only.

• High-performance standard disc with very good specifications. • Suitable for cutting work on full materials, pipes, profiles and metal sheets. 2 • 2 designs: 1

Ø x Thickness mm 100 x 6.0 115 x 6.0 125 x 6.0 180 x 6.0 230 x 6.0

Bore Ø mm 16.0 22.2 22.2 22.2 22.2

Art. No. 6691.061.006 669.161.156 669.161.256 669.161.808 669.162.306

P/Qty 50 25 25 10 10

Eco Thin Cutting Disc

Ø x Thickness mm 100 x 2.0 115 x 2.5 125 x 2.5 180 x 3.0 230 x 3.0

Bore Ø mm Art. No. P/Qty 16.0 6691.001.0022 50 22.2 669.101.1521 25 22.2 669.101.2521 25 22.2 669.101.8032 25 22.2 669.102.3032 1/25

• For stainless steel, mild steel and glass fibre. Ø: 115 mm, 1.0 mm thick, bore Ø: 22.2 mm. • Contains no iron, chlorine or sulphur [ 0.1%. • Design:

Dimensions mm 115 x 2.0 x 22.2 230 x 2.4 x 22.2

Bore Ø mm 22.2

Art. No. 669.031.150

P/Qty 1 1

Electricians Diamond Blade • • • • •

Colour code: yellow. Clean cutting due to thin segments. Will also cut reinforcing bar. Suitable for hard and abrasive materials. Dry cutting only.

Dimensions mm 115 x 2.0 x 22.2 230 x 2.4 x 22.2 Ø x Thickness mm 115 x 1.0

Art. No. 668.115.221 668.230.221

Art. No. 668.115.222 668.230.222

P/Qty 1 1

P/Qty 50

CALL NOW! 0870 950 2800 FOR FURTHER DETAILS.

ABRASIVES

Würth Cutting Disc Blue for steel

S060 210 x 195 customer catalogue.qxp

26/11/2008

Plumbers Diamond Blade

ABRASIVES

• Colour code: blue. • Good cutting performance on both hard and abrasive materials combined with a long service life. • Clean cutting. • Dry cutting only.

Dimensions mm 115 x 2.0 x 22.2 230 x 2.4 x 22.2

Art. No. 668.115.223 668.230.223

P/Qty 1 1

Tilers Diamond Blade

• Colour code: orange. • Ideal for glazing tiles, stoneware, thin gran ite and concrete panels. • Thin ‘turbo’ style rim for quick cutting. • Continuous rim leaves clean edges. • Dry cutting only.

Dimensions mm 115 x 1.4 x 22.2 230 x 2.0 x 22.2

Art. No. 668.115.224 668.230.224

12:27

Page 74

Landscapers/Block Paving Diamond Blade • • • • • • •

• Colour code: pink. • Ideal for the majority of common building materials. • Thin segments give a clean cut. • Long lasting for maximum price/perform ance ratio. • Dry cutting only.

Colour code: green. Ideal for hard materials. Thin segments mean fast clean cutting. Low noise and vibration. Generates very little dust. Will also cut thin steel profiles. Dry cutting only.

Dimensions mm 115 x 1.6 x 22.2 230 x 1.9 x 22.2 300 x 1.9 x 20.0 350 x 1.9 x 25.4

Art. No. 668.115.225 668.230.225 668.300.205 668.350.255

P/Qty 1 1 1 1

Construction / Concrete Diamond Blade

• Colour code: magenta. • Specially suitable for very hard materials, i.e. flint aggregate concrete. • Ideal for engineering blocks. • Wet or dry cutting.

Dimensions mm 115 x 2.0 x 22.2 230 x 2.4 x 22.2 300 x 2.8 x 20.0 350 x 3.2 x 25.4

Art. No. 668.115.227 668.230.227 668.300.227 668.350.257

P/Qty 1 1 1 1

Floor Saw Diamond Blade • Colour code: black. • For asphalt only. • Wet or dry cutting. • Colour code: grey. • For concrete only. • Dry cutting only.

P/Qty 1 1 Dimensions mm 230 x 2.8 x 22.2 300 x 2..8 x 20.0 350 x 3.2 x 24.4

Builders Diamond Blade

Art. No. 668.230.226 668.300.206 668.350.256

P/Qty 1 1 1

For Asphalt Code Dimensions mm Black 350 x 2.8 x 25.4 For concrete Code Dimensions mm Grey 350 x 2.8 x 25.4

CALL NOW! 0870 950 2800 FOR FURTHER DETAILS.

Art. No. 668.350.259

P/Qty 1

Art. No. 668.350.258

P/Qty 1

S060 210 x 195 customer catalogue.qxp

26/11/2008

General Purpose Diamond Blade

Art. No. 668.999.230 668.999.300

• New super thin diamond cut-off blade only 1.2 mm thick. • Easy cutting; very short cutting times, reduced machine strain. • One-handed cutting also possible. • Cutting accuracy. • Visibly less cutting dust due to reduced width of the diamond blade. • Suitable for use on building materials, hard stone, granite, tiles and ceramics.

P/Qty 1 1

Dry Diamond Core Drills

• Suitable for lightweight building products: facing bricks, soft stone, breeze blocks, insulation blocks and concrete blocks*. * Not suitable for reinforced or non-reinforced concrete. • Used by plumbers, electricians, heating and ventilation engineers and general builders. • Drills clean holes with no breakout. • Quicker, cleaner and more efficient than hammer crowns. • Suitable for SDS or standard chucks. • Use only on rotary action. • Dry use only. • Segment depth: 6 mm. • Requires a 13 mm pre-drilled hole.

ABRASIVES

Bore Ø mm 22.2 20.0

Page 75

Thin Diamond Blades

• Multi use blade for most building materials.

Ø x Thickness mm 230 x 300 x

12:27

Mortar Raking Blade

• 6 mm wide for raking out old mortar joints prior to repointing, inserting lead flashing etc. • Suitable for use on cement based joints only. • Usage on other materials will shorten blade life.

Ø x Thickness mm 115 x 6.0

Bore Ø mm 22.2

Art. No. 668.461.115

P/Qty 1

Ø x Thickness mm 115 x 1.2 125 x 1.2

Bore Ø mm 22.2 22.2

Art. No. 666.167.115 666.167.125

P/Qty 1 1

More than 250 professionally trained sales consultants throughout the UK. Offering the best service and advice. Call us today to arrange a visit from your local sales consultant.

Description Size mm Adaptor pack (STD chuck) * 250mm Extension bar 250 SDS Adaptor pack ** SDS Extension bar 250

Art. No. P/Qty 6511.001.1 1 6511.001.2 6511.001.3 6511.001.4

1 1 1

Core bit Dimensions mm Fitting 28 x 300 12 mm AF 38 x 150 ½” BSP 52 x 150 ½” BSP 65 x 150 ½” BSP 78 x 150 ½” BSP 107 x 150 ½” BSP 117 x 150 ½” BSP 127 x 150 ½” BSP 152 x 150 ½” BSP

Art. No. P/Qty 6511.028.300 1 6511.038.150 1 6511.052.150 1 6511.065.150 1 6511.078.150 1 6511.107.150 1 6511.117.150 1 6511.127.150 1 6511.152.150 1

* Adaptor pack includes; Hexagon fitment, guide rod and drift pin. ** Adaptor pack includes; SDS fitment, guide rod and drift pin.

www.winzerwurth.co.uk CALL NOW! 0870 950 2800 FOR FURTHER DETAILS.

S060 210 x 195 customer catalogue.qxp

26/11/2008

Abrasive Paper for Wood

Page 76

Abrasive Paper for Hardwoods

• An extra heavy duty paper backed abrasive designed to remove maximum material with minimal wear rates. The resin/resin bonded aluminium oxide abrasive produces a stiff, yet flexible product suitable for machine or hand use. • Suitable for all hardwoods. • “F” (270G/M²) weight backing paper also suitable for machine use. • Electro coated, resin/resin bonded aluminium oxide grit. • Close coated abrasive for maximum material removal. • Dimensions: Width: 115 mm, Length: 50 m.

ABRASIVES

• Suitable for hard and soft woods, MDF, chipboard, veneers, etc. • Can be used by hand or with machines. • Open coated. • Aggressive initial and long term sanding. • Backing paper weight; hook and loop products, D weight. All other products, 40G to 150G-E weight, 180G to 320G-D-E weight. • Bonding system; hook and loop products, synthetic resin, other products, flexible synthetic resin. • Grit; aluminium oxide.

12:28

P/Qty Grit 240 Grit 220 Grit 180 Grit 150 Grit 120

50 x x x x

50 x x x x x

50 x x x x

50 x x

1 x x x x x

Grit 100 Grit 80 Grit 60 Grit 40

x x x x

x x x -

x x x

x x x o

Hole system / Art. No.

581.180...

581.498...

581.450...

581.452...

581.485...

Velcro, Plain

Velcro, Hutchins 6 holes 150 mm

Velcro, 10 holes

Size/Dia./Hole pattern

with

150 mm

115 x 230 mm

Roll Delta pad, W: 115 mm x 6 holes L: 50 m 90 mm

x = available - = unavailable o = 40g roll is 45 metres in length, other grits are 50 m.

• Suitable for use on: paints, hardwoods, softwoods, particle boards etc. • Flexible backing paper. • Electro coated and resin bonded with aluminium oxide grit. • Heavy duty dry finishing paper available in coarse grits for high removal rates. • Stearite coating resist clogging, to improve abrasive life and surface finish. • Dimensions: Width: 70, Length: 125 mm.

Grit 80 120 150 180 240 320 Grit 40 60 80 100 120 150 180 240

Art. No. 5829.99.40 5829.99.60 5829.99.80 5829.99.100 5829.99.120 5829.99.150 5829.99.180 5829.99.240

P/Qty 1 1 1 1 1 1 1 1

Always wear a dust mask whilst sanding!

Art. No. 5814.80 5814.120 5814.150 5814.180 5814.240 5814.320

P/Qty 100 100 100 100 100 100

Velcro Hand Block

Dimensions mm 70 x 125

without Hole system / Art. No.

Aluminium Oxide Velcro Strips

Art. No. 5814.001

P/Qty 1

Art. No. 715.64.06

P/Qty 1

Cork Hand Block

Check out our range on pages 213-214 Dimensions mm 100 x 60 x 40

CALL NOW! 0870 950 2800 FOR FURTHER DETAILS.

26/11/2008

Stearated Aluminium Oxide Abrasives

12:29

Page 77

Backing Discs

• For finishing work this stearated aluminium oxide can be used by hand or with orbital / random orbital sanders. • Suitable for the preparation of painted or lacquered surfaces and bare timber. • Ideally suited to sanding UPVC. • Semi-open coated for improved service life. • Stearate coating “lubricates” to aid sanding. • “C” weight backing paper. • Resin adhesive.

• For Dry Abrasive Paper. - Self Adhesive (PSA). - Velcro. • Discs for Plain, 6 hole-Hutchins or 8 holeFesto. • 3 types of ‘Pad to tool’ fixing. • Plastic plate with expanded rubber layer. • Stable plate layer, creating a uniform abrasive area. The Disc gets progressively flexible towards the edges.

Velcro

P/Qty Grit 400 Grit 320 Grit 240 Grit 220 Grit 180

100 x x x x

50 x x x x

50 x x x x x

1 x x x x x

Grit 150 Grit 120 Grit 100 Grit 80

x x x

x x

x x x

x x x x

Hole system / Art. No.

582.451...

582.450...

582.415...

581.452...

PSA, (sticky), plain

Quick grip (velcro), plain

Quick grip (velcro), Hutchins 6 hole

Roll W: 115 mm x L: 50 m

150 mm

without Hole system / Art. No.

Ø mm Finish 150 8 Hole 115 Plain 125 8 Hole

M8 screw 5/16” screw M14 Internal Art. No. Art. No. Art. No. 586.150.15 586.115. 01 586.583.017 -

Self Adhesive (PSA) Ø mm 150 180 150 125 115

M8 screw 5/16” screw Finish Art. No. Art. No. 6 Hole 586.150.12 586.150. 16 Plain(R) Plain 586.150. 10 Plain (R) Plain (R) -

M14 Internal Art. No. 586.580.180 586.580.125 586.580.115

Abrasive Pad • • • • •

For wood and metal working. Aluminium oxide. Abrasive paper and pad in one. For dry sanding. Adapts to any shape therefore universally usable. • Reusable after rinsing with water. • Especially suitable for surface sanding.

Dimensions mm 155 x 100 x 9 155 x 100 x 9 155 x 100 x 9 155 x 100 x 9 155 x 100 x 9

Grain 60 80 100 120 220

Art. No. 587.02.60 587.02.80 587.02.100 587.02.120 587.02.220

P/Qty 10 10 10 10 10

Abrasive Sponge • • • • •

For wood and metal working. Aluminium oxide. Abrasive paper and pad all in one. For dry sanding. Adapts to any shape therefore universally usable. • Reusable after rinsing with water.

Solid rubber disc = (R)

Size/Dia./Hole pattern

with

x = available - = unavailable o = 80g is not stearated

NEXT DAY DELIVERY -

on orders placed before 3pm.

Dimensions mm 100 x 68 x 25 100 x 68 x 25 100 x 68 x 25 100 x 68 x 25 100 x 68 x 25 100 x 68 x 25 100 x 68 x 25

Grain 60 80 100 120 160 180 220

www.winzerwurth.co.uk CALL NOW! 0870 950 2800 FOR FURTHER DETAILS.

Art. No. 587.01.60 587.01.80 587.01.100 587.01.120 587.01.160 587.01.180 587.01.220

P/Qty 10 10 10 10 10 10 10

ABRASIVES

S060 210 x 195 customer catalogue.qxp

26/11/2008

12:29

Page 78

Abranet

Ideal for wood sanding and denibbing primers, top coats and lacquers. Abranet provides an ideal option to sanding prior to lacquering and due to it’s excellent dust free sanding it proves to be extremely long lasting. Available in 80 grit to 1000 grit, Abranet can be used on its own or as part of a sanding system when used with Abralon and the Polarshine finishing compounds.

Grit

P/Qty

Diameter Art. No.

80 150mm 587.600..

125mm 587.625..

100 120 150 180 240 320 400 500 600 800 1000 x

ABRASIVES

Abranet Technical Specifications:

• • • •

Dust-free sanding. Wood sanding. Denibbing primers, paints and lacquers. Extremely long lasting.

Grain Bonding Backing Coating Colour Grits Diameter

Abranet Backing Pad: Size

Art. No. 585.273.150 585.273.125

150mm

Aluminium oxide Resin over resin Polyamide fabric Closed Brown 80 to 1000 125mm & 150mm

125mm

Abralon

Abralon Developed for flexible sanding of smooth and profiled surfaces being prepared for polishing, lacquering or top coating. The foam backing creates a smooth sanding pattern and minimises the risk of pressure marks, etc. This product can be used for dry and wet sanding.

Grit Diameter

P/Qty

Art. No. 180

360

500

600

1000

2000

4000

20 150mm

587.601..

Abralon Technical Specifications: Grain Bonding Backing Coating Colour Grits Diameter

Silicone Special resin Knitted fabric on foam Special Grey 180 to 4000 150mm

CALL NOW! 0870 950 2800 FOR FURTHER DETAILS.

S060 210 x 195 customer catalogue.qxp

26/11/2008

12:29

Page 79

Product

Description z

Course Compound C20

z z

Single System Compound T10

z z z

2nd Step Compound F05

Ultra Fine Finishing Compound UF3

z z

Art. No.

P/Qty

Polishing and scratch remover Use after 1200 grit

893.012.10

1/6

Scratch remover Use after Abralon 2000 or 4000 grit Use prior to 2nd step compound

893.012.11

1/6

Use after course or single compounds Creates a high gloss finish

893.012.12

1/6

Protects the high gloss finishes Contains Carnauba wax

893.012.13

1/6

Art. No.

P/Qty

585.280.150

585.230.180

ABRASIVES

Polarshine Polishing Compounds

Lambs Wool Pad Product

Description Hologram removal Achieves high gloss finishes z Suitable for most polishing systems z Easy grip fastening z Washable z Size: 150mm x 25mm z For medium coarse polishing z Suitable for dry use z Minimises swirl marks z Easy grip fastening z Washable z Size: 180mm z z

Black Dotted Foam Pad

Lambs Wool Pad

www.winzerwurth.co.uk CALL NOW! 0870 950 2800 FOR FURTHER DETAILS.

S060 210 x 195 customer catalogue.qxp

26/11/2008

Abrasive Block

• For metal, ceramic, etc. • Rubberised blocks impregnated with abrasive grit. • For cleaning metal products prior to anodising or lacquering. • For cleaning ceramic or enamelled surfaces. • For removing rust, scale, corrosion, etc.

ABRASIVES

Dimensions mm 80 x 50 x 20 80 x 50 x 20 80 x 50 x 20

Grain 60 120 240

Art. No. 587.03.60 587.03.120 587.03.240

P/Qty 1 1 1

Abrasive Fleece

For wood, plastics and metal. • Used in the wood working industry for denibbing between lacquer coats and in the re-finishing trade for fine finishing and preparation. • Based on a quality, synthetic, fibrous mesh, the abrasive grit is resin bonded to each filament throughout the material, to produce an effective three dimensional structure. • To be used wet or dry for sanding painted surfaces, equally effective on wood, plastics and metal. • For contoured surfaces, profiles and difficult to reach areas. • A cost effective alternative to steel wool.

12:30

Page 80

Nylon Abrasive Fleece

Abrasive Paper Wet & Dry

Course, 100g

• For initial roughening and cleaning of corroded/soiled surfaces.

Medium, 180g

• Pre-treatment for painting galvanised steel. • Suitable for roughening and cleaning of aluminium truck bodies (platform gates, box and tank bodies).

Fine, 280g

• For cleaning, grease removal and roughening. • Suitable for stripe matting (decorative finish) of non-ferrous metals, stainless steel etc. • Polishing copper, and brazed joints.

Silicon carbide Ultra Fine S, 1000g

• Suitable for touch up paintwork: roughening of surfaces adjacent to repair points for absorption of mist edge and for perfect blending (in particular for two-coat metallic paintwork).

Roll Grain W mm P 100 115 P 180 115 P 280 115 P 1000 115

Lm 5 5 5 5

Art. No. 585.805.100 585.805.180 585.805.280 585.805.600

Large Dispenser, (empty) Approx. grit equivelant 320 360 1500

• For wall mounting. • Takes all Würth abrasive rolls. Colour Green Red Grey

Art. No. 5851.1 5851.2 5851.3

P/Qty. 20 20 20

Art. No. 956.109.0

P/Qty 1 1 1 1

• Can be used wet or dry, extremely flexible backing. • Suitable for contoured surfaces. • Excellent finish. • Excellent contact to the material and extremely good grip. • Very good initial and long-term abrasive action with a long service life. Aluminium Oxide: • Closed coated abrasive. • B-weight paper. • Resin bonded. • Sheet size: 280 x 230 mm. Silicium Carbide: • Closed coated abrasive. • 80 - 150g ‘C weight paper. • 180 - 1200g ‘B weight paper. • Sheet size: 280 x 230 mm.

Grain P 80 P 120 P 150 P 180 P 240 P 320 P 400 P 500 P 600 P 800 P 1000 P 1200

Aluminium oxide

Silicium carbide

Art. No 584.01.180 584.01.240 584.01.320 584.01.400 584.01.500 584.01.600 584.01.800 584.011.000 584.011.200

Art. No 584.11.80 584.11.120 584.11.150 584.11.180 584.11.240 584.11.320 584.11.400 584.11.500 584.11.600 584.11.800 584.111.000 584.111.200

P/Qty 1

CALL NOW! 0870 950 2800 FOR FURTHER DETAILS.

P/Qty 50 50 50 50 50 50 50 50 50 50 50 50

26/11/2008

Zebra Emery Cloth

• Suitable for all grinding and polishing work. • The grains are distributed according to the international FEPA standards. • The high grade corundum (exceptionally pure aluminium oxide) is blended with tough bauxite emery. • The high quality special skin glue guarantees maximum grain adhesion. • The backing strip is made of tear-resistant long-fibre cotton.

Grain 40 80 120 60 80 80 100

Roll W mm 30 30 30 40 40 110 110

Lm 19 25 28 21 25 25 26

Art. No. 674.830.40 674.830.80 674.830.120 674.840.60 674.840.80 674.899.80 674.899.100

P/Qty 1 1 1 1 1 1 1

12:30

Page 81

Sanding Belts

Mini Sanding Belts

For hand held machines. Cloth backed. Aluminium oxide (corundum). Aggressive coating for: - maximum material removal. - non clogging. - long service life. - even finish. • Grits: 60 to 240. • • • •

Belt dimensions W mm L mm 65 410 75 480 75 533 75 610 100 560 100 610 105 620

Art. Prefix 5883.410... 5882.480... 5882..533... 5882.610... 5881.560... 5881.610... 5881.620...

• Aluminium oxide (corundum). • Linen with synthetic resin bonding. • Centrifugal clamping ensures non-slip seating of sand belt. • High working capacity due to flexibility of support material. • Cool sanding action ensures no tarnishing of workpieces. • Suitable for forged steel, malleable cast iron, nodular cast iron, cardon steel, deepdrawing steel, strip steel, non-ferrous metals, wood, cast resin, fillers. • Synthetic resin and fillers can be worked with an appropriately coarse grain.

P/Qty 10 10 10 10 10 10 10

Power File Belt

• Universal abrasive belt for profiled metal sections and formed parts. • Aluminium oxide grit is fully resin bonded to a high quality tough and durable cotton cloth ‘X’ weight. The closed coating ensures a superior finish.

Call now and ask about the latest Special Offers available. Grit 40 60 80

Belt dimensions W mm L mm 13 457 13 457 13 457

Art. No. 6721.457.40 6721.457.60 6721.457.80

P/Qty 10 10 10

Ø mm 12 22 30 45 60

W mm 10 20 30 30 30

P 80 P 150 Art. No. Art. No P/Qty 589.112.102 50 589.122.202 50 589.130.302 589.130.303 50 589.145.302 20 589.160.302 15

Mini Arbor

• Shaft: 6 mm. • For use with mini sanding belts.

Ø mm 12 22 30 45 60

W mm 10 20 30 30 30

Total L mm 50 60 70 70 70

CALL NOW! 0870 950 2800 FOR FURTHER DETAILS.

P 80 Art. No. 589.112.100 589.122.200 589.130.300 589.145.300 589.160.300

P/Qty 1 1 1 1 1

ABRASIVES

S060 210 x 195 customer catalogue.qxp

26/11/2008

ABRASIVES

Flap Wheels

• Made of soft, flexible grinding cloth fans. • Mixed corundum made of normal and special corundum. • Grinding lamella based in an artificial resin bound centre radial to the axle. • Shaft: 6 mm. Applications: • Final grinding and polishing work in tool and mould making. • Working of small and hard to reach areas in tank and container construction. Finishing of fittings made of heavy and light metal as well as stainless and acid resistant steel. • Specially suitable for smoothing surfaces up to fine finishing. • Even and seamless grinding. • Only suitable for right-hand rotation.

12:31

Page 82

Mat-Finishing Wheels

• Seamless matting and stripe matting, silk finishing and removal of dirt and oxidation of metals. • Mixed corundum made of normal and special fused alumina. • Artificial resin bound lamella, arranged radial to the axle. • Only suitable for right-hand rotation. • Shaft: 6 mm. Grinding Fleece/Linen Combined • Additional grinding linen between the grinding fleece gives better grinding results. Workable materials • Mild steel, malleable cast iron, high strength cast iron, C-steel, deep drawing steel, steel tape, die-cast zinc, non-ferrous metals, CrNi and other high grade steels. • Wood.

Burnishing Drums (Fleece)

• With 6 mm keyway 19 mm bore for surface grinders. • Suitable on: forged steel, annealed cast iron, non-ferrous metal, stainless steel, wood. • Max 30m/sec.

Fleece 180

Ø mm W mm 100 100

Art. No. 672.918.0

P/Qty 1

Burnishing Drums Fleece/Abrasive Combined Grain Ø fleece/linen mm 180/150 50

W mm 30

Art. No. 672.965.318

P/Qty 5

Sisal Mops

Grit 60 80 120 60 80 120 60 80 120

Ø mm 30 30 30 40 40 40 60 60 60

W mm 15 15 15 20 20 20 30 30 30

Art. No. 672.030.60 672.030.80 672.030.120 672.040.60 672.040.80 672.040.120 672.060.60 672.060.80 672.060.120

P/Qty 1 1 1 1 1 1 1 1 1

• Used for buffing/ polishing uPVC profile. • Fits all popular machines. • Ø 80 mm. • Width: 85 mm. • Maximum speed: 4500 rpm. • Two thread versions; M8 male or 3/8” female. • Adaptor; converts male to 3/8 female. Description Sisal mop M8 male thread Sisal mop 3/8” female thread Adaptor M8 male to 3/8” female

Art. No.

P/Qty

673.02.001

673.02.002

673.02.003

• With 6 mm keyway and 19 mm bore for surface grinders. • With medium hardness alumina and fleece. • Suitable for deadening and burnishing. • Removes small scratches on metal, hard plastic and wood.

Fleece/ Grit Ø mm W mm 100/80 100 100

CALL NOW! 0870 950 2800 FOR FURTHER DETAILS.

Art. No. 672.910.80

P/Qty 1

26/11/2008

Nylon Grinding Fleece Discs

• For use with separate arbors and support ing flanges. • Silicium carbide. • Resilient nylon fibre fleece with embedded grit. • Suitable for all shapes and contours. • Even finish without scores or scratches. • Highly effective for cleaning without removing too much of the base material, no weakening of thin body panels. • Not affected by paint, rust particles, tin, underbody seal or body sealants. • No discolouring of parts treated. • Free from corrosive metals. • Resistant to water and solvents. • May be used wet or dry.

12:32

Page 83

Nylon Grinding Fleece Disc

• Double discs with integral clamping shaft. • Silicium carbide. • Resilient nylon fibre fleece with embedded grit. • The supporting plastic flanges can be broken off in steps as discs wear down. • Suitable for all shapes and contours. • Even finish without scores or scratches. • Highly effective for cleaning without removing too much of the base material, no weakening of thin body panels. • Not affected by paint, rust particles, tin, underbody seal or body sealants. • No discolouring of parts treated. • Free from corrosive metals. • Resistant to water and solvents. • May be used wet or dry.

Braided Pot Brush

• Braided steel wire. • For cleaning of heavily soiled large areas. • Ideal for the preliminary cleaning of metals which are intended to be painted or coated. • For removal of slag, rust and paint. • M14 Thread. Ø mm 65 100

Wire Ø mm 0.5 0.5

Art. No. 714.69.01 714.69.100

P/Qty 1 1

For working on stainless steel. • VA wire, right braided. • M14 Thread. Ø mm 70

Wire Ø mm 0.35

Art. No. 714.692.01

P/Qty 1

Universal Wire Brush

Ø mm 100

Art. No. 585.2100

P/Qty 1/5

Centrifugal Wire Brush

Ø mm 100 150

Art. No. 585.1100 585.1150

P/Qty 1/10 1/10

Arbor Shaft Ø mm Art. No. 6 585.110.01* 8 585.115.01** * suitable for 585.1100 ** suitable for 585.1150

• Braided steel wire. • Suitable for cleaning inside tubes and rivet hole edges. • For removal of rust, burr, welding and rubber residues. • Hard to reach places can be accessed. • Shank: 6 mm. • Wire Ø: 0.3 mm.

• Braided steel wire. • One line of braid. • Suitable for use when a fast peripheral velocity is required. • For removal of rust, scale, remains of glue and excess rubber on swinging metal parts. • Bore Ø: 22.2 mm. Ø mm 115 150

Wire Ø mm 0.5 0.5

Art. No. 714.69.02 714.69.03

P/Qty 1 1

Hand Scratch Brushes • Number of rows: 5. • Wire Ø: 0.35 mm.

P/Qty 1 1 Ø mm 20

Art. No. 714.69.04

P/Qty 1

Description Steel wire, plain A2 wire, wavy

CALL NOW! 0870 950 2800 FOR FURTHER DETAILS.

Art. No. 697.5 697.15

P/Qty 1 1

ABRASIVES

S060 210 x 195 customer catalogue.qxp

26/11/2008

Grinding Wheels Ceramically Bound

• For various wheel stands. • Type A, straight. • Suitable for tool grinding machines or other stationary grinding machines. • Qualities: normal corundum, special fused alumina, green silicon carbide.

ABRASIVES

Normal Corundum

• For general workshop use, the grinding of normal steel, iron, forging grade steel, etc. Dimensions mm 150 x 20 x 32 150 x 20 x 32

Grain 60 80

Art. No. 679.115.060 679.115.080

P/Qty 1 1

12:33

Page 84

Grinding Wheel Truing Device • Used for sharpening, roughening and refacing grinding wheels, up to 38 mm wide. • Length: 290 mm

Replacement Wheels for Grinding Wheel Truing Device Suitable for 679.100

Adaptor Sleeves

Art. No. 679.215.060 679.215.080 679.217.560 679.215.080

P/Qty 1 1 1 1

• Made of plastic for bores (reducing bushes).

P/Qty 1

• Heavy vulcanised fibre quality, 0.8mm thick. • Aluminium oxide (corundum). • Synthetic resin bound. • 22 mm hole, with cross recess (P16g without recess).

• For hardened steel and tools made of steel and high-speed steel, etc. Grain 60 80 60 60

Art. No. 679.101

Vulcanised Fibre Discs

Special Fused Alumina Dimensions mm 150 x 20 x 32 150 x 20 x 32 175 x 25 x 32 200 x 32 x 32

P/Qty 1

Art. No. 679.100

• Aggressive grain for: - highest possible grinding effect - even grinding - no clogging due to dust-repellent coating • No breaking out of the grain. • No breaking or tearing at the edges during grinding. • Available in a variety of different grains.

Grain P16 -P40 Outer Ø mm Inner Ø mm 32 16 32 15 32 12

Art. No. 679.032.16 679.032.15 679.032.12

P/Qty 2 2 2

• Suitable for polishing straightened parts.

Grain P50 - P120

• Suitable for grinding off old lacquer coats, finish grinding before application of the filler and cleaning of metal surfaces. Dimensions mm 100 x 0.8 x 22 115 x 0.8 x 22 125 x 0.8 x 22 180 x 0.8 x 22

Art. Prefix. 580.100... 580.115... 580.125... 580.180...

P/Qty 50 50 50 50

Vulcanised Fibre Discs

with zirconium / corundum grit • • • • •

Heavy vulcanised fibre quality 0.75mm thick. Dense scattering of zirconium. Full synthetic resin bonding. 22 mm hole, cross slot. Many times longer life than conventional fibre discs. • Particularly suitable for high grade steel. • Zirconium grinding particles for: - the greatest possible removal of material - excellent continuous grinding - even ground surface - long length of life. • Permitted circumferential speed: 80 m/s. Applications: • Suitable for the removal of rust, paint and filler, processing of steel, high grade steel, castings, aluminium, stone and hard plastics, welds, no-ferrous metals and wood. • Deburring and chamfering. • Grinding down filler.

Dimensions mm 100 x 0.75 x 16 100 x 0.75 x 16 115 x 0.75 x 22 115 x 0.75 x 22

Grain 36 50 36 60

Art. No. 580.010.036 580.010.050 580.011.536 580.011.560

P/Qty 25 25 50 50

Rubber Backing Disc • With 22 mm hole. Dimensions mm 115 x 22 125 x 22 180 x 22

CALL NOW! 0870 950 2800 FOR FURTHER DETAILS.

Art. Prefix. 586.580.115 586.580.125 586.580.180

P/Qty 1 1 1

26/11/2008

Lamella Fan Type Grinding Discs

• With zirconium corundum. • Excellent grinding properties until completely used up. • Self-sharpening of the lamella, therefore, no clogging. • Even finish without scores and scratches. • Low noise level. • Application without additional backing disc. • Suitable for de-burring, smoothing, removal of rust from steel, stainless steel, cast iron, alum, hard plastics, wood , stone. For working of welds, grinding of paint, lacquer and filler. 2 • 2 designs: 1

12:34

Page 85

Eco Flap Disc • • • •

Lamella Fan Type Grinding Discs

Zirconia corundum. Long service life. Max. speed 80 m/s. Design:

Dimensions mm 115 x 22.2 115 x 22.2 115 x 22.2

Grain Art. No. P/Qty 40 5781.511.540 25 60 5781.511.560 25 80 5781.511.580 25

Lamella Fan Type Grinding Discs

With fibre backing disc

• Backing disc made of several layers of fibreglass. Dimensions mm 100 x 16 100 x 16 100 x 16 115 x 22 115 x 22 115 x 22 125 x 22 125 x 22

Grain 36 60 80 40 60 80 36 60

Art. No. P/Qty 578.100.5361 10 1 578.100.560 10 1 578.100.580 10 579.430.5142 10 579.430.5161 10 579.430.5181 10 579.430.3241 10 579.430.3261 10

• With zirconium corundum. • Slim arched plastic cup. • Plastic cup made of fibreglass reinforced polyamide to give no smearing. • Special zircon-corundum with cooling coating, grinding additives and multi-binding of the grinding fabric. • Resistant to heat and cold (-40ºC to +180ºC) thus no deformation or cracks occur during the grinding process. • Extremely high service life and grinding performance. • Design:

Dimensions mm 115 x 22.2 115 x 22.2

Grain 40 60

Art. No. 579.430.314 579.430.316

P/Qty 10 10

• • • •

• With aluminium oxide. • Many times longer service life compared to fibre grinding discs. • Excellent grinding properties until completely used up. • Self sharpening of the lamella - therefore no clogging. Even finish without scores and scratches. Low level noise. Application without additional backing disc. Suitable for de-burring, smoothing, removal of rust from steel, stainless steel. cast iron, alum, hard plastics, wood, stone. For working of welds, grinding of paint, lacquer and filler.

Dimensions mm 115 x 22.2 125 x 22.2 125 x 22.2

Grain 80 60 80

Art. No. P/Qty 579.511.580 10 579.312.560 10 579.312.580 10

Polishing Flap Discs

• Highly effective grinding Fleece in fan shaped flap disc. • Suitable for descaling and derusting of workpieces, preparing, repolishing and smoothing of weld seams, preparation of painted surfaces, polishing of stainless steel, cleaning of surfaces of various materials. • Ø 115 mm, bore 22.2 mm.

Description Coarse Medium Fine

Colour beige red blue

CALL NOW! 0870 950 2800 FOR FURTHER DETAILS.

Art. No. 585.311.510 585.311.518 585.311.524

P/Qty 1/10 1/10 1/10

ABRASIVES

S060 210 x 195 customer catalogue.qxp

26/11/2008

Zebra LONGLIFE Segmented Grinding Disks

ABRASIVES

NEW! • For free-hand grinding with electric or pneumatic angle grinders. • Patented segment shape and arrangement. • Ideal for the processing of steel, stainless steel, and aluminium. • Used to grind edges and surfaces, dressing and smoothing, deburring and for weld seam processing. • Extremely long service life coupled with very high degree of material removal. • Max circumferential speed: 80m/s. • Free of iron, chlorine and sulphur (<0.1%). • High-performance grinding cloth with additional grinding active topcoat (topsize coating). • Minimal vibrations in comparison to conventional roughing disks. Ø in mm Hole in mm Grit Art. No. P/Qty 40 578.480.514 115 22.23 10 60 578.480.516

12:35

Mini Cloth Power Lock Discs

• Zirconium corundum. • With quick-action chucks. • For use with compressed air grinders (right angle) and flexible shafts. • Discs of Ø 76 mm can also be used with 115 mm compressed air or electric angle grinders if support fixture M14 is used. • Suitable for processing welds, grinding surfaces, removal of paint, sharpening tools, plastering and smoothing, deburring, grinding of edges and finishes, removal of rust, particularly in hard-to-reach areas. • Especially for stainless steel and alloys of chromium and nickel. Steel alloy and nonalloy, structural steel, tool steel, non-ferrous metal, cast iron, hard plastics, wood.

Ø mm 50 50 50 75 75

Grain Art. No. P/Qty 36 580.005.036 50 60 580.005.060 50 120 580.005.012 50 60 580.007.560 50 120 580.007.512 50 • Chuck system compatible with 3M Roloc system.

Mini Polishing Disc

• High-gloss polishing and re-polishing of all polishable materials using polishing paste. • Especially for stainless steel, steel and nonferrous metals.

Ø mm 50 75

Page 86

Art. No. P/Qty 673.23.50 10 673.23.75 10 • Chuck system compatible with 3M Roloc system.

Mini Fleece Power Lock Discs

• With quick-action chucks. • For use with compressed air grinders (right angle) and flexible shafts. • Discs of Ø 76 mm can also be used with 115 mm compressed air or electric angle grinders if support fixture M14 is used. • Suitable for cleaning and scouring of surfaces, removal of discolouration, rust, dirt and oxide layers, light deburring, creation of decorative surfaces, smoothing of welds with minimal removal of base material, removal of grinding marks, scratches, coatings and old paint. • Can be used on virtually any material. Particularly suitable for use on stainless steel, steel, non-ferrous metals, wood and plastics.

Ø mm 50 50 50 75 75

Colour Grain Art. No. P/Qty brown 100 673.205.010 50 red brn 180 673.205.018 50 blue 280 673.205.028 50 brown 100 673.207.510 50 red brn 180 673.207.518 50 • Chuck system compatible with 3M Roloc system.

Support Fixture for Small Grinding Media Design 6 mm shaft, discs Ø 50 mm 6 mm shaft, discs Ø 75 mm M14 threads, discs Ø 75 mm

Total length

Art. No.

P/Qty

65 mm

586.578.01

65 mm

586.578.02

30 mm

586.578.03

CALL NOW! 0870 950 2800 FOR FURTHER DETAILS.