26/11/2008
Würth Biscuits
• Universal connector for butt or mitre, corner and frame joints. • High strength due to slight swivelling of the biscuit when glued into joint. Size mm 0 10 20
Art. No. 907.250.0 907.250.10 907.250.20
P/Qty 1000 1000 1000
Fluted Dowels
• Material: red beech. • Chamfered on both ends. • Ø M6 to M12. • 8 - 10% wood moisture. • Length: 30 to 80 mm.
Page 129
Cupboard Suspension
• Load capacity: 200kg. • 3-dimensional adjustment range. • Colours: white or beige. • Can be mount ed left or right handed.
Colour White Beige
Art. No. 683.713 683.714
P/Qty 50 50
Suspension Rail Brackets
• For corner connector screw. • Head Ø 15 mm.
RAL 9010 8001
Art. No. 590.15 590.15.92
P/Qty 200 200
Euro Screw • • • •
Finish: zinc plated. Two head types A (CSK) & B (Pan head). Drive: Pozi No. 2. Pre-drilled hole Ø 5 mm.
Type A
Type B
Type A, Nickel Plated
• Zinc plated. • Pre-drilled head 3 mm. • Drive: Pozi No.3.
Material: mahogany or beech. Ø M6 to M20. Length: 1 metre. Chamfered on both ends. 8 - 10% wood moisture.
Colour White Ochre
P/Qty 500
Corner Connector Screw
Fluted Dowel Rods
Cover Caps
• Length 63 mm.
Art. No. 6831.711
Art. Prefix. 907...
• • • • •
14:39
Thread Ø mm 6.3 6.3
L mm 11 14
Art. No. 276.06.311 276.063.14
P/Qty 200 500
Type B, Nickel Plated Thread Ømm 7 7 7
Art. Prefix. 907...
L mm 40 50 70
Art. No. 276.7.40 276.7.50 276.7.70
P/Qty 500 500 500
Thread Ø mm 6.3 6.3
• With depth stop for corner connector screw. • 3 drill sizes to suit screw. • Complete with depth stop.
Art. No. 276.63.12 276.63.14
P/Qty 100 100
Hinge Screw Borer Bit • • • •
Drill Bit
L mm 12 14
Pilot hole: Ø 2.7mm. Shaft: Ø 6 mm. Length: 16 mm. Can be used for hinge or drawer runner screw holes.
NEXT DAY DELIVERY -
Size mm 7 x 40 7 x 50 7 x 70
Art. No. 627.103.123 627.103.133 627.103.153
P/Qty 1 1 1
on orders placed before 3pm.
Art. No. www.winzerwurth.co.uk 650.827 CALL NOW! 0870 950 2800 FOR FURTHER DETAILS.
P/Qty 1
129
FURNITURE FITTINGS, FIXTURES AND ACCESSORIES
S093 210 x 195 Customer Catalogue.qxp
S093 210 x 195 Customer Catalogue.qxp
26/11/2008
FURNITURE FITTINGS, FIXTURES AND ACCESSORIES
Replacement Drill Bit
• For eccentric fitting. • Finish: silver. • 5mm pilot hole for screwing bolt to side panel. • 8mm clearance hole for bolt from joint edge to eccentric cam. • Bolt clamping length: 20 mm.
• • • • • •
For board thickness of 16 mm or above. Material: zinc diecast. Finish: nickel plated. 15 mm Ø hole. Internal knibs prevent cam from loosening. No lateral displacement of shelf when tightening. • Large clamping range.
Art. No. 6831.208.31
Finish: yellow. 4 mm allen key drive. Thread: M6. Flat head for an unobtrusive finish. Ideal for use in the furniture industry.
Connecting Bolts
• Material: plastic with metal thread (M6). • Light duty anti-twist lock on shank of sleeve. • Bore hole diameter 8 mm.
Ø mm M6 M6 M6 M6
L mm 40 50 80 100
Cross Dowels
Finish Depth mm Art. No. P/Qty 1) Nickel plated 16 683.202 100 2) Nickel plated 19 683.208.105 100
System Bolt
• For eccentric fitting. • Material: steel, self colour. • 5 mm pilot hole for screwing bolt to side panel. • 8 mm clearance hole for bolt from shelf edge to eccentric cam. • Bolt clamping length 30.5 mm.
Art. No. 683.208.1
• • • • •
P/Qty 1000
2
1
Furniture Bolts
P/Qty 1
Eccentric Cam Fitting
130
Page 130
System Bolt
• For Hinge Screw Borer. • Shaft length: 70 mm. • Ø 2.7 mm.
Art. No. 650.828
14:40
P/Qty 100
Colour White White
Thickness mm 29 - 36 34 - 41
Art. No. 275.16.29 275.16.34
P/Qty 50 50
Connecting Bolts • • • • •
Ø mm M6 M6
Material: metal ends and sleeve. Finish: nickel plated or burnished. Sleeve thread: M4. Bore hole diameter 5mm. Centering shoulder.
Colour Thickness mm Nickel plated 28 - 34 Nickel plated 36 - 42 Nickel plated 41 - 47 Burnished 36 - 42
Art. No. 275.06.28 275.06.36 275.06.41 275.07.36
L mm 15 20
Cap
P/Qty 100 100 100 100
Art. No. 2751.6..40 2751.6..50 2751.6..80 2751.6..100
P/Qty 200 200 100 100
• Finish: BZP. • To be used in conjunction with Furniture Bolts. • Thread: M6. • Length: 15 or 20 mm. Art. No. 2751.15 2751.20
P/Qty 500 100
• Finish: yellow. • To be used in conjunction with Furniture Bolts. • Flat head for an unobtrusive finish. • 4 mm allen key drive. Ø mm M6
CALL NOW! 0870 950 2800 FOR FURTHER DETAILS.
Art. No. 2751.6..1
P/Qty 100
26/11/2008
Worktop Jig
• Two versions: 400 - 700 mm, 400 - 900* mm. • Comes complete with fixing pins and full instructions. * Can be used for 1000 mm in certain applications.
14:41
Page 131
Worktop Plate Connectors
• These connectors are placed on the underside of the worktop and provide a strong, secure connection. • Material: zinc diecast or plastic (PA 6.6). • Securely connects two surfaces. • Use 35 mm Ø drill (Hinge borer Art. No: 650.035). Material Cast Iron Plastic (P.A. 6.6)
Description 400 - 700 400 - 900* Pin set
Mitreseal
Colour Light Wood Oyster White Deep Buff Empire Green China Blue Metal Grey White Clear Black
Art. No. 6831.04.750 6831.04.900 6831.04.800
P/Qty 1 1 1
• Solvent free. • Water based sealing compound for jointing between worktops. • Waterproof. • Colours can be mixed to match worktop. • Contents: 100 ml. • 1 tube is normally sufficient for approximately one kitchen. Art. No. 8901.601.02 8901.601.05 8901.601.08 8901.601.12 8901.601.13 8901.601.16 8901.601.17 8901.601.19 8901.601.20
P/Qty. 1 1 1 1 1 1 1 1 1
Note: colours may differ from that shown in the chart.
Art. No. 683.242 683.243
P/Qty 25 25
Worktop Connector and Solid Wood Connector • • • •
Material: bright steel. Screw length: 65 and 150 mm. Hole Ø: 35 mm. Groove width: 15 mm.
L mm 65 150
Dimensions x 32 - 41 mm 75 -84 mm
Mitre Connector
Material Plastic ( PA 6.6)
Art. No. 683.240 683.241
P/Qty 50 50
• Material: plastic (PA 6.6). • Easy and secure connection of mitres. • Enclosed bore template. • Drill Ø 10 mm. Art. No. 683.244
P/Qty 100
Corner Connector with Cover • Material: plastic. • Colours: white, ivory and light brown. • Screw Ø: 3.5 mm.
Colour White Ivory Light brown
Art. No. 683.201.3 683.201.4 683.201.6
P/Qty. 200 200 200
Modesty Panel Blocks • • • • •
Material: plastic. Colour: white, brown, beige or beech. Dimensions: L 38 x H 14 x D 15 mm. Centres: 19 mm. Ø of holes: 4.5 mm.
Colour White Brown Beige Beech
Art. No. 6831.14 6831.15 6831.16 6831.17
P/Qty. 1000 1000 1000 1000
Wood Connector
• To DIN 1052 standard design. • Double sided, zinc plated by galvanisation. • Tight connections of solid wood beams and limestone blinders to one another. • Outside Ø: 48 mm. • Centre hole Ø: 17 mm. Art. No. 451.021.48
CALL NOW! 0870 950 2800 FOR FURTHER DETAILS.
P/Qty 200
131
FURNITURE FITTINGS, FIXTURES AND ACCESSORIES
S093 210 x 195 Customer Catalogue.qxp
S093 210 x 195 Customer Catalogue.qxp
26/11/2008
FURNITURE FITTINGS, FIXTURES AND ACCESSORIES
Chair and Box Bracket
• Material: Steel, zinc plated. • Holes countersunk on both sides. • Holes offset to improve fastening action. • Leg length 75 mm or less: 2 holes each. • Leg length 90 to 150 mm: 3 holes each. Leg L mm 25 x 25 30 x 30 40 x 40 50 x 50 60 x 60 75 x 75 90 x 90 100 x 100 150 x 150
Leg W mm 14 14 15 15 18 18 20 20 25
Art. No. 451.325 451.330 451.340 451.350 451.360 451.375 451.390 451.310.0 451.315.0
P/Qty 50 50 50 50 50 25 25 25 25
Angle Stretcher Plates
• Finish: self colour or zinc plated. • 1.5 mm thick steel. • Dimensions: 25 x 28.5 mm. • 2 holes, Ø 5 mm. • 2 slots, 16 x 5.5 mm.
Finish Self colour Zinc plated
Art. No. 4511.317.1 4511.317.4
Small Right Angle Bracket
P/Qty. 500 500
• Material: steel, selfcoloured. • Material thickness: 1.2, 19 x 19 mm. • 2 holes: Ø 5 mm.
Art. No. 4511.011.2
132
P/Qty 2500
14:43
Page 132
Small Slotted Bracket
• Material: steel, selfcoloured. • Material thickness: 1.2 mm, 19 x 19 mm • 2 slots = 9.5 x 5 mm.
Art. No. 4511.011.3
P/Qty 2500
Table Leg Bracket
• Material: steel, 1.7 mm thick. • Finish: self coloured. • Centre hole: Ø 10 mm. • Screw holes for No.8 (4 mm). • Dimensions: 60 x 105 mm. Art. No. 4511.259
• Material: aluminium. • Finish: matt silver. • Dimensions: 620 x 40 mm.
P/Qty 5
Kitchen Worktop Straight Joint
• Material: aluminium. • Finish: matt silver. • Dimensions: 620 x 40 mm.
Art. No. 683.241.405
• Material: aluminium. • Finish: matt silver. • Dimensions: 620 x 40 mm.
Art. No. 683.241.404
P/Qty 10
Adjustable Feet
• Material: plastic. • Each set includes: 2 plinth clips. • Ø 28 mm. • 1 = set of 4.
P/Qty 75
Kitchen Worktop Corner Joint
Art. No. 683.241.406
End Cap
P/Qty 5
Adjustment range mm 100 - 130 145 - 170
Art. No. 6831.100 6831.150
P/Qty. 1 set 1 set
Adjustable Feet
• Improved stability due to 70 mm Ø foot surface. • Simple to adjust by hand or screwdriver. • Adjustment range: -10 mm to +20 mm. • Fix to carcass with Wüpofast 4 mm Ø screws. • Base panel clips available separately.
Adjustment For base range mm height mm 90 - 120 100 140 - 170 150 180 - 200 200
CALL NOW! 0870 950 2800 FOR FURTHER DETAILS.
Art. No. 683.360.301 683.360.303 683.360.305
P/Qty 40 40 40
Clip Holder
Art. No. 683.360.021
26/11/2008
• For screw fitting to the base panel use Wüpofast screws. Ø: 3.5 mm.
14:44
Page 133
Flap Support with Holding Knob • Steel, nickel plated support bar and foot. • Easy to latch and disengage by lifting flap. • A spring slightly accelerates closure of the flap. • For use on flaps of 200 to 500 mm. • Length of support bar: 200 mm.
P/Qty 100
Clip Holder with Bridge
• For keyway fitting into base panel.
Application Left Right
Art. No. 683.407.1 683.408.1
P/Qty 1 1
Tilt and Lift Mounting Art. No. 683.360.022
P/Qty 100
Flap Support with Latching Mount
• Steel, nickel plated support bar and foot. • Plastic section: coloured white. • Latches securely, subsequently disengaged by slightly raising flap. • Slight braking action during closing. • For use on flaps of 200 to 500 mm. • Length of support bar: 200 mm
• Particularly suitable for wall mounted cupboards in the kitchen. • Adjustable spring force of 0-200N per spring. • Opening angle of 76°. • Pivots upwards from angle of 17°. • Hardened steel rivets. • Particularly smooth operation due to the spring being attached to plastic covered mountings. • Colour: white (RAL 9010).
Shelf Support Rails and Shelf Supports
• Material: aluminium. • Finish: aluminium or gold anodised. • Toothed sides provide solid anchorage into rebate. • Rebate is covered by face plate of rail (12.9 mm) wide. • Distance between slots: 25 mm. • Length of rail: 3500 mm. Description Rail Rail Support Support
Finish Aluminium Gold anodised Aluminium Gold anodised
Art. No. 683.405.2 683.406.2
P/Qty 1 1
• Material: plastic with metal stud. • Peg: steel. • Colours: beige white or clear. • Drill Ø 5 mm. • Good support area. • Stable and elegant design. Colour Beige Clear White
Application Right Left
Art. No. 683.740.1 683.741.1
P/Qty 1/4 1/4
P/Qty 1 1 100 100
Push-in Shelf Supports
Shelf Clip
Application Left Right
Art. No. 683.307 683.308 683.309 683.310
Art. No. 683.302
www.winzerwurth.co.uk CALL NOW! 0870 950 2800 FOR FURTHER DETAILS.
Art. No. 683.298 683.299 683.300
P/Qty 500 500 500
• Material: steel, zinc nickel plated. • Drill Ø 5 mm. • Length: 18 mm.
P/Qty 500
133
FURNITURE FITTINGS, FIXTURES AND ACCESSORIES
S093 210 x 195 Customer Catalogue.qxp
S093 210 x 195 Customer Catalogue.qxp
FURNITURE FITTINGS, FIXTURES AND ACCESSORIES
Shelf Peg Plain
Description Zinc plated Nickel plated
26/11/2008
• Material: steel. • Finish: zinc plated or nickel plated. • Drill Ø 5 mm. • Length: 24 mm. Art. No. 683.311 683.311.1
• Material: steel. • Finish: zinc plated or nickel plated. • Centralising collar. • Drill Ø 5 mm. • Length: 16 mm. Art. No. 683.315 683.315.1
Page 134
Shelf Peg Spoon Shape with Sleeve
P/Qty 500 500
Description Support Support Support Sleeve Sleeve Sleeve
Finish Brass plated Burnished Zinc plated Brass plated Burnished Zinc plated
Art. No. 683.311.3
P/Qty 500
Shelf Peg Spoon Shape
• Material: steel. • Finish: nickel plated, burnished or brass plated. • Spoon shape gives stable shelf support. • Drill Ø 5 mm.
Description Nickel plated Burnished Brass plated
134
Art. No. 683.321 683.322 683.322.1
P/Qty 500 500 500
• Material: plastic support, Inset metal pin. • Colour: white, brown or beige. • Requires no drilling.
Art. No. 683.323 683.324 683.325 683.323.1 683.324.1 683.325.1
P/Qty 500 500 500 500 500 500
Description White Brown Beige
• Material: steel, brass-plated or bur nished. • Can be used with or without sleeves. • Commonly used in pine and repro antique furniture.
Description Finish Banjo Brass plated Socket Brass plated Banjo Burnished Socket Burnished
Art. No. 6831.326 6831.326.1 6831.327 6831.327.1
Shelf Peg for Glass Shelves
P/Qty 100 100 100 100
Art. No. 683.305 683.306 683.312
P/Qty 500 500 500
Screw-on Magnetic Catch
• Material: plastic. • Colour: white or brown. • Pulling force: 6kg.
Banjo Style Shelf Supports
Shelf Peg for Glass Shelves
• Material: steel. • Finish: nickel plated with half PVC transparent cover. • Drill Ø 5 mm. • Length: 18 mm.
Knock-in Shelf Supports
• Material: steel. • Finish: brass-plated, burnished or zinc plated. • Drill Ø 7mm with out sleeve, drill Ø 7.5 mm with sleeve.
P/Qty 500 500
Shelf Peg Centre Collar
Description Zinc plated Nickel plated
14:46
Description White Brown
Art. No. 6831.412 6831.413
P/Qty 150 150
Drill-in Magnetic Catch • • • • • •
Material: plastic. Colour: white or brown. Press-in serrated body. Pulling force: 4kg. Rebate hole Ø: 13.6 mm. Screw-on magnetic plate made of chromatised steel.
• Material: clear plastic with nickel-plated steel stud. • Drill Ø 5 mm. • To take glass thickness: 5.5 mm.
Art. No. 683.311.4
P/Qty 500 Description White Brown
www.winzerwurth.co.uk CALL NOW! 0870 950 2800 FOR FURTHER DETAILS.
Art. No. 683.415 683.416
P/Qty 50 50
Ball Catches
26/11/2008
• Material: solid brass. • Adjustable tensioner. • Uses 3 mm Ø screws.
Art. No. 6831.417
P/Qty 20
• Finish: zinc plated or burnished. • Two sprung nylon rollers. • Use 3 mm Ø screws. Art. No. 6831.418 6831.419
Page 135
Wardrobe Rail Round
• Top quality welded round steel tube. • Finish: brass plated and clear lacquered. • Wall thickness: 0.6 mm. • Dimensions: 19 mm (¾”) x 2.5 m. • Suggested screw size: Ø 3.5 mm x length. Art. No. 6831.250.020
Double Roller Catches
Description Burnished Zinc plated
14:47
P/Qty 100 100
Art. No. 6831.250.022
Centre Bracket
Wardrobe Rail Oval
• Top quality welded oval tube. • Finish: brass plated and clear lacquered or chrome plated. • Wall thickness: 1.0 mm. • Dimensions: 15 mm x 30 mm x 2.5 m. • Suggested screw size: Ø 3.5 mm. x length. Description Chrome Brass
“The fixtures and fittings are always manufactured to a very high standard, and the reps will always go that extra mile for you.”
P/Qty 1
End Bracket
End Socket
Art. No. 6831.250.040 6831.250.050
Art. No. 6831.250.023
End Bracket
P/Qty 1 1
• Material: brass plated. • To fit wardrobe rail Ø: 19 mm (¾”).
Description Chrome plated Brass plated
Centre Bracket Art. No. 6831.250.021
P/Qty 50
NEXT DAY DELIVERY -
John Senior, Horse Box builder, Chichester.
on orders placed before 3pm.
Description Chrome plated Brass plated
www.winzerwurth.co.uk CALL NOW! 0870 950 2800 FOR FURTHER DETAILS.
• Material: brass plated. • To fit wardrobe rail Ø: 19 mm (¾”).
P/Qty 50
• Material: brass plated. • To fit wardrobe rail Ø: 19 mm (¾”).
P/Qty 50
• Finish: chrome plated or brass plated. • To fit wardrobe rail: 15 x 30 mm. Art. No. 6831.250.041 6831.250.051
P/Qty 100 100
• Finish: chrome plated or brass plated. • To fit wardrobe rail: 15 x 30 mm. Art. No. 6831.250.042 6831.250.052
P/Qty 50 50
135
FURNITURE FITTINGS, FIXTURES AND ACCESSORIES
S093 210 x 195 Customer Catalogue.qxp
S093 210 x 195 Customer Catalogue.qxp
26/11/2008
FURNITURE FITTINGS, FIXTURES AND ACCESSORIES
Coathanger • • • • •
Material: steel, nickel-plated. Extendable. Mounts underside of shelf or carcass. Length: 310 mm. Use 3.5 mm Ø screws.
Art. No. 683.559
• "Drop & Lock" twin slot cantilever shelving system. • Tough polyester powder coating. • Thick gauge steel. • Suitable for domes tic and commercial / industrial use high inherent strength.
Page 136
Cable Tidies
Description Brown Beige Grey Black
P/Qty 1
Shelf Support System
14:47
• Round adjustable tidy. • Material: plastic. • Colours: brown, beige, grey or black. • Fits 80 mm holes. • Glue lines collar. Art. No. 683.280.435 683.280.436 683.280.437 683.280.438
• High quality powder coated finish. • High quality powder coated finish with plastic insert. • White only. • Push to release key locking version only. • Box Qty. 100 pcs. only.
P/Qty 1/250 1/250 1/250 1/250
Espagnolette Handles • • • •
High quality powder coated finish. Available in inline or cranked versions. Colours: white, gold or polished chrome. Die cast zinc alloy assured operational durability. • Available in push to release - Key locking and non locking versions. • Choice of spindle lengths. • 1) Inline locking, 2) Inline non-locking, 3) Cranked locking.
Description
Trade Espagnolette Handle Inline Locking
Spindle length mm 10
689.108.020
15
689.108.021
20
689.108.022
25
689.108.023
30
689.108.024
40
689.108.025
Art. No.
Espagnolette Rods
1
• • • •
3 Size Max. inches load kg Description Art. No. P/Qty 7 104 Bracket 683.391.301 10 9 84 Bracket 683.391.302 10 10½ 62 Bracket 683.391.303 10 12½ 55 Bracket 683.391.304 10 14½ 50 Bracket 683.391.305 10 28 Upright 683.391.307 10 40 Upright 683.391.308 10 48 Upright 683.391.309 10 63 Upright 683.391.310 10 78 Upright 683.391.311 10 94 Upright 683.391.312 10 Art. Prefix. 689.106...
P/Qty
100
Quality steel product. Available in 20 and 22 mm backsets. Rod lengths 250 to 1200 mm. Adjustable mushroom cams in 8 mm and 9 mm heights. • Suitable for full depth or shallow Euro groove systems. • Unique design gearbox gives smooth operation of the rod. • Non handed for ease of ordering.
2
136
Trade Espagnolette Handles
P/Qty 10/100
Art. Prefix. 689.100...
CALL NOW! 0870 950 2800 FOR FURTHER DETAILS.
26/11/2008
Espagnolette Strikers/Keeps • • • •
Die cast metal. Night vent position as standard. Extensive range of keeps for all major profile systems. Picture for illustrative purposes only as keeps will vary according to profile.
Art. Prefix. 689.100...
Friction Stays
• Non handed for ease of fabrication and stock control. • Manufactured from quality stainless steel. • Top hung and side hung versions. • Choice of 13 mm or 17 mm stack heights. • Lengths from 8" to 24".
14:50
Page 137
Residential Door Handles
• Suitable for the majority of door bolt locking systems in the UK. • Manufactured from die cast zinc alloy and aluminium. • Quality powder coated on all exposed surfaces, white version. • Suitable for all popular 92 mm handle centre doorbolt mechanisms. • Colours: gold, chrome and white. • High performance electro ferritic finish on the gold and chrome versions. • 1) Lever/lever, 2) lever/pad. 1
Egress Friction Stays
• Choice of 13 mm or 17 mm stack heights • Identifiable from a normal stay by the green top and green friction pad. • 16” and 12” lengths. • Quality stainless steel. • Handed left and right. • Allows casement windows to open a full 90 degrees.
• Available in mid - rail (40 to 80 mm) and panel (20 to 40 mm) versions. • Colours: white, gold and chrome. • Complete with fixing screws and gaskets. • Internal brush draught excluder as standard. • Aluminium flaps for improved weather protection. • Packed individually for protection. • 10” or 12”wide.
2
Art. Prefix. 689.107... Art. Prefix. 689.100...
Letterplates
Flag Hinges
• Suitable for both UPVC and timber doors. • Manufactured from quality die cast zinc alloy. • Fully adjustable in three directions. • Non handed for ease of fabrication. • Available in 90 or 110 mm options. • Colours: white, brown, gold and chrome. • Jig available for ease of fabrication..
Art. Prefix. 689.100...
Art. Prefix. 689.102...
P/Qty 1/25
Door Cylinders
• Manufactured from solid brass for strength and durability. • Finish: nickel or brass. • Each cylinder comes with three keys and fixing screw. • All cylinders are anti-pick and have hardened pins and mushroom drivers.
Art. Prefix. 689.624.../625...
P/Qty 1/50
Art. Prefix. 689.101...
www.winzerwurth.co.uk CALL NOW! 0870 950 2800 FOR FURTHER DETAILS.
137
FURNITURE FITTINGS, FIXTURES AND ACCESSORIES
S093 210 x 195 Customer Catalogue.qxp
S093 210 x 195 Customer Catalogue.qxp
26/11/2008
FURNITURE FITTINGS, FIXTURES AND ACCESSORIES
Page 138
Mixer Tap
Single Sink • • • • • •
14:50
Single bowl single drainer. Stainless steel finish. Hand welded. Size 940 x 490mm. Bowl size 400 x 369 x 160mm. Supplied with full waste kit.
Art. No. 6879.130.002
P/Qty 1
• • • • •
Chrome finish. Heavyweight. Single lever monoblock mixer. Height 148mm, reach 223mm. Req min 0.2 bar pressure.
Art. No. 6879.131.001
P/Qty 1
Bowl and Half Sink
1.5 Bowl single drainer reversible. Stainless steel finish. Hand welded. Size 1000 x 480mm. Bowl size 315 x 300 x 180mm / 200 x 300 x 150mm. • Supplied with full waste kit.
138
P/Qty 1
NEW!
Art. No. 6879.131.002
• Contemporary slim neck tap. • Chrome finish. • For longevity only clean with a soft damp cloth. • Refrain from using ALL cleaning products i.e. powders and liquids.
P/Qty 1
Professional Mixer Tap
• • • • •
Art. No. 6879.130.001
Slim Mixer Tap
NEW!
• High class mixer tap. • Removable head for wider rinsing. • Chrome finish. • For longevity only clean with a soft damp cloth. • Refrain from using ALL cleaning products i.e. powders and liquids.
NEXT DAY DELIVERY -
on orders placed before 3pm.
Art. No. 6879.131.003
www.winzerwurth.co.uk CALL NOW! 0870 950 2800 FOR FURTHER DETAILS.
P/Qty 1
26/11/2008
Trickle Vents
• • • • •
* Picture shows clip fixing vent
• Provides trickle ventilation on both domestic and commercial buildings in accordance ` with Building Regulations Part F 2006. • Two versions: screw in (12.5mm routered slot, standard) and clip in (10mm routered slot, slimline). • BBA certified (where applicable). • External canopies have integral flyscreens. • Two sizes: 2000 and 4000 sq mm versions. • Made from UV stabilised PVC-U. • Three colours, white, brown and oak (tof fee). • Two pack sizes, 1 and 50. • For full technical information and copies of the BBA certificates see booklet provided. Art. No. 689...
P/Qty 1 or 50
Supplied as: Inner & outer vent and caps in a plastic bag 50 inner & outer vents in a bulk box with caps
* Screws are not included
Drainage Slot Covers • • • •
Used extensively in the uPVC industry. Covers unsightly slots in the frame profile. Available in white or brown. Require slot: Length 25.4 to 26 mm. Width 4.7 to 4.8 mm.
Colour White Brown
Page 139
4 Way Locking Cat Flap NEW!
P/Qty 1 50*
14:52
Art. No. 875.185.001 875.185.011
P/Qty 1000 1000
Suitable for wooden, glass or UPVC doors. Manual four way locking. White or woodgrain finish with see thru’flap. For cats up to 7kg (15lbs). Dimensions: Overall size: 241 x 252 mm Cut out size: Wood: 168 x 175 mm. Glass: 212 mm Ø.
Description White Woodgrain
Art. No. 689.200.300 689.200.320
4 Way locking Cat Flap with Tunnel
• Suitable for wooden doors, UPVC doors or wall up to 50 mm (2”). • Manual four way locking. • For cats up to 7kg (15lbs). • Colour: white. • Dimensions: Overall size: 224 x 224mm (87/8” x 87/8”). Cut out size: Wood: 169 x 169mm (65/8” x 65/8 ”). Glass: 210 mm (8¼”) Ø.
P/Qty 1/4 1/4
Magnetic Cat Flap • • • • • •
Suitable for wooden, glass or UPVC doors. Manual four way locking. White finish with see thru’ flap. Complete with collar and one key. For cats up to 7kg (15lbs) Dimensions: Overall size: 241 x 252 mm. Cut out size: Wood: 168 x 175 mm. Glass: 212 mm Ø.
Description Magnetic cat flap
Description 4-way locking cat flap Tunnel extension*
Art. No. P/Qty 689.200.917 1/4 689.200.940 1/10
* adds 19mm per section.
Art. No. P/Qty 689.200.400 1/4
CALL NOW! 0870 950 2800 FOR FURTHER DETAILS.
139
FURNITURE FITTINGS, FIXTURES AND ACCESSORIES
S093 210 x 195 Customer Catalogue.qxp