Catalogue - Screwdriving Tools, Pliers, Clamps

Page 1

26/11/2008

16:08

Page 183

Bit Holders

Bit Holder

• Permanent magnet holds bit.

• Suitable for use on hex head screws. • ¼” drive fits all standard chucks. • 50 mm in length.

For 10 or 13 mm Chucks Permanent Magnet & Retaining Ring

‘Big’ Magnetic Bit Holder

• Adjustable collar with powerful ring mag net grips, screws securely.

For Hex Head Screws with Permanent Magnet

L mm 60 Drive inch L mm Bit size 1/4” 74 1/4”

Art. No. 614.176.702

P/Qty 1

• With quick release locking sleeve, holds bits securely.

Drive inch L mm Bit size 1/4” 72 1/4”

Art. No. 614.176.708

P/Qty 1

Art. No. 614.176.752

Art. No. P/Qty 614.176.712 614.176.713 614.176.714 614.176.715 1 614.176.716 614.176.717 614.176.718

Bit Holder

For Hammer Drills

• Retaining ring holds bit in place.

Drive inch L mm Bit size 5/16” 42 1/4”

Drive inch Hexagonal nut 5.5 mm 1/4” 7 mm 8 mm 1/4” 3/8” 10 mm 13 mm

P/Qty 1

• Fits directly onto the end of any SDS or Impact drill bits. • Accepts ¼” screwdriver bits. • Will fit any length drill bits. Caution: to be used only with impact / hammer action switched off.

• Retaining ring holds bit in place.

Drive inch L mm Bit size 1/4” 57 1/4”

Art. No. 614.176.673

Art. No. 614.811.360

P/Qty 1

L mm 25 25 25 25

Art. No. 614.176.274 614.176.461 614.176.651 614.176.652

P/Qty

L mm 50 50 50 50

Art. No. 614.176.735 614.176.736 614.176.659 614.176.660

P/Qty

Bits

25 mm

Description 1/4” H1 (PH) 1/4” H2 (PH) 1/4” Z1 (PZ) 1/4” Z2 (PZ)

10

50 mm

Description 1/4” H1 (PH) 1/4” H2 (PH) 1/4” Z1 (PZ) 1/4” Z2 (PZ)

5

Assy Bits

P/Qty 1

• For the Würth Assy drive screws.

25 mm

Off Line Driver

• Universal joint gives approx. 20° of swivel. • Rotating Sleeve. • 1/4” fitting. Length 100 mm

Magnetic pull 565 grms

Art. No. 614.176.709

P/Qty 1

Assortment: Contents 1 x blue,1 x red,1 x green Individual Bit Holders: Bit L Ø Drill size mm mm Colour size mm Green 6 74 14 Yellow 6.5 ¼” 78 16.5 Red 8 78 18 Blue 10

Art. No 614.100

P/Qty 1

Art. No. P/Qty 614.100.6 614.100.65 1 614.100.8 614.100.10

Description AW 10 AW 20 AW 25 AW 30 AW 40

L mm 25 25 25 25 25

CALL NOW! 0870 950 2800 FOR FURTHER DETAILS.

Art. No. 614.511.0 614.512.0 614.512.5 614.513.0 614.514.0

P/Qty 1/10

183

SCREWDRIVNG TOOLS, PLIERS, CLAMPS

S120 210 x 195 Customer Catalogue.qxp


S120 210 x 195 Customer Catalogue.qxp

26/11/2008

50 mm

Description AW20 AW25

Page 184

Screwdriver - Slotted L mm 50 50

Art. No. 614.522.0 614.522.5

P/Qty

Screwdriver - Cross Recess (Z)

• With end-to-end hexagon blade. • Shaft: Hexagon, nicromatt. • Shape of blade acc. to: DIN 5265-A, ISO 2380, Black point.

Pozidrive

• With end-to-end hexagon blade/sleeve. • Shaft: Hexagon, nicromatt. • Shape of blade acc. to: ISO 8764-PZ, Black point.

1/5

Diamond Pozi Bits

• Bit blades coated with minute diamond particles 15µ (microns). • Particles clutch the screw drive, alleviating slippage. • Requires less force. 5 • Reduces driving-in times & bit wear.

SCREWDRIVNG TOOLS, PLIERS, CLAMPS

16:09

Tip mm 0.6 x 3.5 0.8 x 4.0 1.0 x 5.5 1.2 x 6.5 1.6 x 8.0 1.6 x 10.0 2.0 x 12.0

Art. No. 613.421.035 613.421.004 613.421.055 613.421.065 613.421.08 613.421.10 613.421.12

P/Qty

1

1/4” 1/4” 1/4” 1/4”

Art. No. 614.412.51 614.412.52 614.412.53 614.422.52

P/Qty 5

• With end-to-end hexagon blade/sleeve. • Shaft: Hexagon, nicromatt. • Shape of blade acc. to: DIN 5260-PH, ISO 8764-PH, Black point.

Bit-Box

• Sturdy metal box. • Colour coded for instant recognition. • Contains 36 Bits 1/4”- (25 mm long).

Tip H1 H2 H3 H4

Art. No. 613.422.1 613.422.2 613.422.3 613.422.4

P/Qty 1

Ball Head Hexagon Screwdriver Bits PH PZ PH PZ PH

Contents H1 x 12, H2 x 18, H3 x 6 Z1 x 12, Z2 x 18, Z3 x 6 H1 x 6, H2 x 6, H3 x 6 Z1 x 6, Z2 x 6, Z3 x 6 H1 x 6, H2 x 12, H3 x 3 0.5/3.0 x 2, 0.6/4.5 x 2, 0.8/5.5 x 2, 1.0/6.0 x 2, 1.2/6.5 x 2, 1.2/8.0 x 2

Art. No. 614.250.1 614.250.2

P/Qty 1

• Shaft: Hexagon, nicromatt steel. • Shape of blade similar to DIN 911, Black point. • With roll off protection.

• Grip: 2-component straight handle or with adjustable “gun” grip. • Ratchet mechanism: 45 teeth. • Shape of blade acc. to: DIN 3126-D 6.3

NEW! Contents with ratchet and 7 bits

Art. No. 613.630.2

P/Qty 1

Screwdriver - Short Design Phillips (H)

• Blade: round, Nicromatt steel. • Shape of blade acc to: DIN 5260-PH, ISO 8764-PH, Black point. • Conforms to: DIN 5262, SMS SS 2831.

614.250.5 614.250.6

Pozi, Phillips, TX and Flat Bits assortments also available.

184

Art. No. 613.423.1 613.423.2 613.423.3 613.423.4

Gun Magazine Screwdriver

Screwdriver - Cross Recess (H) Description Z1 (PZ) Z2 (PZ) Z3 (PZ) H2 (PH)

Tip Z1 Z2 Z3 Z4

Tip mm 4.0 5.0 6.0

Art. No. 613.415.04 613.415.05 613.415.06

P/Qty 1

Tip H1 H2

CALL NOW! 0870 950 2800 FOR FURTHER DETAILS.

Art. No. 613.252.1 613.252.2

P/Qty 1


S120 210 x 195 Customer Catalogue.qxp

26/11/2008

16:13

Page 185

Screwdriver - Short Design

Screwdriver Sets

• Blade: Nicromatt steel. • Shape of blade acc. to: DIN 5264-A, ISO 2380, Black point. • Conforms to: DIN 5265.

• Shaft: Nicromatt. • Point: Grey steel.

Slotted

Type II - For metal working trade

Reversible Screwdriver Blades Description H2 - 6mm Z1 - Z2 H2 - Z2

Art. No. (blade) 613.801.2 613.802.2 613.803.2

P/Qty 1

Reversible Screwdriver Handle Art. No. 613.251.05

• Left or right handed rotation. • Handle can also be “locked”. • Smooth ratchet operation.

P/Qty 1

Screwdriver - Short Design

Screwdriver Set, Art. No. 613.942.26 Contents: Tip Tip mm Art. No. mm Art. No. 3.5 613.421.035 H1 613.422.1 5.5 613.421.055 H2 613.422.2 6.5 613.421.065 8.0 613.421.08

Pozidrive (Z)

• Blade: Nicromatt steel. • Shape of blade acc. to: ISO 8764-PZ, Black point. • Conforms to: DIN 5262.

P/Qty 1

Screwdriver Sets Tip Z1 Z2

Art. No. 613.253.1 613.253.2

P/Qty 1

Type III - Insulated blade for electrical work • DIN 7437/7438, EN 60900. • Insulated to 1000 volts.

Screwdriver Sets

Type I - For wood working trade

P/Qty 1

Art. No. 613.700

T-Handle Screwdriver Assortment

• Right / left hand lockable. • Constant screwing motion without stopping, allows for high speed screwing. • Smooth ratchet operation. • Screw will not turn when handle is reversed.

• Shaft: Nicromatt. • Point: Grey steel.

Screwdriver Set, Art. No. 613.942.35 Contents: Tip Tip mm Art. No. mm Art. No. 3.5 613.421.035 Z1 613.423.1 5.5 613.421.055 Z2 613.423.2 6.5 613.421.065

P/Qty 1

Screwdriver Set, Art. No. 613.963.25 Contents: Tip Tip mm Art. No. mm Art. No. P/Qty 2.5 613.631.025 H1 613.632.1* 4.0 613.631.04 H2 613.632.2* 1 6.5 613.631.065*

Contents T-handle, 14 bits, Quick change chuck blade

Art. No. 613.72

P/Qty 1

Replacement screwdriver bits available to order separately.

* Not available separately.

CALL NOW! 0870 950 2800 FOR FURTHER DETAILS.

185

SCREWDRIVNG TOOLS, PLIERS, CLAMPS

Tip mm 0.8 x 4.0


S120 210 x 195 Customer Catalogue.qxp

26/11/2008

16:15

Page 186

Wibos Junior

Allen Keys

• Suitable for screwing and drilling operations (0.4-6mm). • Magnetic bit holder. • 90° planetary gear. • Case hardened bevel gears for long life.

• Short series. • Bright nickel plated.

The small screw driver and drill.

Ball Head Allen Key Set • 9 sizes.

DIN 911

L¹ L² P/Qty 1/20

• Ø 0,4 - 6 mm, 6.4mm hex.

Contents: mm 2, 3, 4, 5, 6, 7, 8 1.5, 2, 2.5, 3, 4, 5, 6, 8, 10, 12

P/Qty 1

Bradalls

Art. No. 715.31.100 715.31.110

P/Qty 1

1

Art. No.

715.50.100

P/Qty 1

T-bar Wrench

Internal TX Wrench

• Special vanadium steel, bright-galvanised. • Impact resistant plastic handle, cadmium free.

Allen Key Fold-Out Set

• Round section shaft. • Composite plastic or wooden handles. • Blade size: 6 x 100 mm.

P/Qty

Ball Head Allen Key Set with Retainer Ring

Contents mm 1.5, 2, 2.5, 3, 4, 5, 6, 8, 10

• 7 and 10 piece sets. • Plastic wallet.

For Wibos

Art. No. 715.40.100

1/10

Allen Key Set

Chuck Art. No. 713.92.04

Art. No. 715.31.35 715.31.36 715.31.37 715.31.38 715.31.39 715.31.40 715.31.41 715.31.43

Accessories:

• Keys fold into handle. • 7 sizes. • Straight key shafts.

L² L¹

Description Wood handle Plastic handle

186

Art. No. 715.34.49 613.230.91

P/Qty 1

Contents: mm 2.5, 3, 4, 5, 6, 8, 10 ¶

SCREWDRIVNG TOOLS, PLIERS, CLAMPS

Replacement screwdriver bits available to order separately.

L2 mm 15 16 18 20 25 28 32 36

P/Qty 1

Art. No. 713.92.05

mm L1 mm 1.5 45 2.0 47 2.5 56 3.0 65 4.0 72 5.0 80 6.0 90 8.0 100

Contents: mm 1.5, 2, 2.5, 3, 4, 5, 6, 8, 10

Art. No. 715.31.70

P/Qty 1

TX size 10.0 15.0 20.0 25.0

L1 mm

L2 mm

100

70

150

90

www.winzerwurth.co.uk CALL NOW! 0870 950 2800 FOR FURTHER DETAILS.

Art. No. 613.140.10 613.140.15 613.140.20 613.140.25

P/Qty

1


26/11/2008

T-bar Wrench

• Special vanadium steel, bright-galvanised. • Impact resistant plastic handle, cadmium free. ¶

mm L1 mm 2.5 100 3.0 4.0 5.0 150 6.0 8.0 2.5 3.0 4.0 5.0 200 6.0 8.0 10.0

L2 mm Art. No. P/Qty 70 613.132.025* 613.132.03* 613.132.04* 90 613.130.05 613.130.06 613.130.08 613.133.025* 1 70 613.133.03* 613.133.04* 613.131.05 90 613.131.06 613.131.08 150 613.131.10

* Without ball end. straight shaft.

Nut Spinners

• Widely used in the conservatory roof industry. • Slim design, reaches into the narrow channels in roof sections. • Rubber grip handle.

mm 6.0 8.0 10.0

Art. No. 613.436.06 613.436.08 613.436.10

Page 187

Combination Spanner

Internal Hexagonal Wrench

16:16

P/Qty 1

DIN 3113 / ISO 3318 / 7738 metric POWERDRIV

• Chrome-vanadium. • Chromed, heads and ring ball-burnished. • Dodecahedron on the ring side and 15° jaw position are in the best possible relationship with the handle. This produces the smallest possible angle of rotation. • The 15° offset of the ring spanner provides more room for the fingers and for overcoming obstacles. • The smallest possible tolerance for the width across flats guarantees higher reliability and safety during intensive use.

mm L mm Art. No. P/Qty 6.0 100 713.301.06 7.0 110 713.301.07 8.0 120 713.301.08 9.0 130 713.301.09 10.0 140 713.301.10 11.0 150 713.301.11 12.0 160 713.301.12 13.0 170 713.301.13 14.0 180 713.301.14 15.0 190 713.301.15 16.0 200 713.301.16 1 17.0 205 713.301.17 18.0 215 713.301.18 19.0 230 713.301.19 20.0 240 713.301.20 21.0 250 713.301.21 22.0 260 713.301.22 23.0 270 713.301.23 24.0 280 713.301.24 25.0 290 713.301.25 27.0 310 713.301.27 30.0 340 713.301.30 Assortment: C’nP/ Contents mm ents Art. No. Qty 11 8,9,10,11,12,13,14,15,17, 713.301.40 19,22 1 17 6,7,9,10,11,12,13,14,15,16, 713.301.41 17,18,19,20,21,22

Adjustable Spanner DIN 3117

• Moving scale for quick reference of A / F nut sizes (mm). • Chrome-vanadium, forged, chromium plated, polished heads. • Narrow profile and tapered jaws allows easy access in tight spaces. • Opening angle 22.5°.

mm(Max.) 19.2 24.0 29.0 34.0

L mm 159 206 257 320

Art. No. 715.221.06 715.221.08 715.221.10 715.221.12

P/Qty 1

Ratchet Set

With Through-Hole Sockets

• With through hole, ideal for long bolts and studs. • Standard sockets can also be used with two adapters (1/4” and 3/8”). • Supplied in a metal box. • Contents: reversing ratchet 205 mm, Extension 76 mm, Adapter ¼” x 26 mm, Adapter 3/8” x 30 mm. • One each of sockets 10 - 19 mm x 32 mm long.

Contents 14 pieces

CALL NOW! 0870 950 2800 FOR FURTHER DETAILS.

Art. No. 713.130.0

P/Qty 1

187

SCREWDRIVNG TOOLS, PLIERS, CLAMPS

S120 210 x 195 Customer Catalogue.qxp


S120 210 x 195 Customer Catalogue.qxp

26/11/2008

1/4” Multi Socket

SCREWDRIVNG TOOLS, PLIERS, CLAMPS

Art. No.

4

713.113.04

5

713.113.05

5.5

713.113.055

6

713.113.06

7

713.113.07

8

713.113.08

9

713.113.09

10

713.113.10

11

713.113.11

12

713.113.12

13

713.113.13

14

713.113.14

P/Qty

1

• Supplied in a metal box and a high-quality foam insert with clamping effect.

188

1/2” Multi Socket

• Chrome-plated, polished. • Drive: 3/8” inner square. • Bit: 12-sided, multi-pro file. • Geometry: short.

1/4” Multi-Use Socket Set, 32 Pieces Art. No. 965.11.032

Page 188

3/8” Multi Socket

• Chrome-plated, poished. • Drive: 1/4” inner square. • Take-off: bi-hexagon multi-use profile. • Geometry: short. mm

16:17

P/Qty 1

mm 6 6.3 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22

• Chrome-plated, polished. • Drive: 1/2” inner square. • Tip: 12-sided, multi-pro file. • Geometry: short.

Art. No. 713.123.06 713.123.063 713.123.07 713.123.08 723.123.09 713.123.10 713.123.11 713.123.12 713.123.13 713.123.14 713.123.15 713.123.16 713.123.17 713.123.18 713.123.19 713.123.20 713.123.21 713.123.22

P/Qty

1

3/8” Multi-Use Socket Set, 22 Pieces

• Supplied in a metal box and a high-quality foam insert with clamping effect. Art. No. 965.12.022

P/Qty 1

mm 10 11 12 13 14 15 16 17 18 19 20 21 22 24 26 27 28 30 32

Art. No. 712.134.10 712.134.11 712.134.12 712.134.13 712.134.14 712.134.15 712.134.16 712.134.17 712.134.18 712.134.19 712.134.20 712.134.21 712.134.22 712.134.24 712.134.26 712.134.27 712.134.28 712.134.30 712.134.32

P/Qty

1

1/2” Multi-Use Socket Set, 23 pieces

• Supplied in a metal box and a high-quality foam insert with clamping effect. Art. No. 965.13.023

CALL NOW! 0870 950 2800 FOR FURTHER DETAILS.

P/Qty 1


S120 210 x 195 Customer Catalogue.qxp

26/11/2008

16:17

Page 189

Delivery Scope - 1/4” Multi-uuse Socket Set Drive

Length 138 mm 100 mm 150 mm 33 mm 216 mm 30 mm 22 mm 25 mm

Art.-No. 714.11.151 713.118.104 713.118.106 713.118.301 613.430.311 715.11.01

Designation

1

713.113.04 713.113.14 614.176.274 614.176.461 614.176.648

Drive

Length

Art.-No.

Bit slotted 0,8 x 5,5

614.175.653

Bit hex. socket size 3 Bit hex. socket size 4 Bit hex. socket size 5 Bit hex. socket size 6 TX 10 TX 15 TX 20 TX 25 TX 30 TX 40 Metal box Foam insert comp

614.176.93 614.176.94 614.176.95 614.176.96 614.311.0 614.311.5 614.312.0 614.312.5 614.313.0 614.314.0 955.715.1 955.11.32

25 mm

225 x125 x 35 mm 220 x105 x 30 mm

Drive

Length

Art.-No.

25.5-31 mm

713.123.06 713.123.22

315x115x 40 mm 312x113x 34 mm

955.715.2 955.12.022

1

SCREWDRIVNG TOOLS, PLIERS, CLAMPS

Designation Reversing ratchet Extension Extension Universal joint Screwdriver handle Adapter with quick change chuck 12 multi-use sockets, one each sizes 4-14 Bit PH 1 Bit PH 2 Bit PH 3

Delivery Scope - 3/8” Multi-U Use Socket Set Designation Ratchet Extension Extension Cardan joint

Drive

Length 175 mm 125 mm 250 mm 55 mm

Art.-No. 714.12.151 713.128.105 713.128.110 713.128.301

1

Designation 18 multi-socket spanners 1 pc. each 6-22 Metal box Foam insert

1

Delivery Scope - 1/2” Multi-U Use Socket Set Designation Ratchet Extension Extension Cardan joint

Drive

Length 250 mm 125 mm 250 mm 70 mm

Art.-No. 712.012 712.138.105 712.138.110 712.138.301

1

Designation 19 multi-socket spanners 1 pc. each 10-32 Metal box Foam insert

Drive

Length

Art.-No.

36-44 mm

712.134.10 712.134.32

405 x160 x 50 mm 400 x150 x 40 mm

955.715.3 955.13.230

www.winzerwurth.co.uk CALL NOW! 0870 950 2800 FOR FURTHER DETAILS.

1

189


S120 210 x 195 Customer Catalogue.qxp

26/11/2008

16:18

Page 190

Multi-Ratchet Combination Set

• Drive: Ring side 12-sided, fine-toothed, 72 teeth with reversing lever for clockwise and anti-clockwise running. • Material: Chrome vanadium steel. • Surface:chrome-plated, high-gloss polished. • Geometry: Jaw position 15°. • Ring side angled down 15°.

SCREWDRIVNG TOOLS, PLIERS, CLAMPS

Ratchet Ring Wrench

• Power take-off: ring end POWERDRIV bihexagonal, fine pitch, 72 teeth. • Max. torque according to DIN 899. • Material: Chrome-Vanadium steel. Surface finish: bright polished, chromeplated. • Geometry: open and offset 15°, ring end 180° joint, sturdy heads for heavy duty use. • Application: loosen screws with open end, unscrew with ratchet mechanism of ring end.

The 15° angle enables more clearance for fingers or for overcoming obstacles.

Double-Ring Ratchet Wrench NEW! • 4 sizes per ratchet wrench. • Material: chrome-vanadium-steel. Set 3

190

in mm 8x10+12x13, 16x17+18x19 Bit adapter: 10mmx1/4, 20mm in length.

Art. No.

P/ Qty

714.257.30

1

CALL NOW! 0870 950 2800 FOR FURTHER DETAILS.

The 180° articulated joint of the ring wrench allows easy & flexible access to work, even in case of hindrances.


26/11/2008

Multi-Ratchet Combination Spanner Set

Set 6

P/ Art. No. Qty 8, 10, 12, 13, 17, 19 714.256.50 1

Page 191

Automatic Centre Punch

Scaffolding Spanners

• Fast and accurate. • One-handed operation by triggering the automatic impact. • Infinitely variable impact force, adjusted via the knurled cap. • Hardened point.

• Steel spanner. • Poka handle. • 11mm W Bi Hex Socket.

Art. No. 713.851.943

in mm

Set of Flexible Ratchet Ring Wrenches

16:19

• • • •

P/Qty 1

Lightweight spanner. Aero space aluminium handle. Poka handle. 11mm W Hex box.

Shank Size L mm Ø mm 1/18-AA 95 10 2/18-A 120 13

Art. No 714.63.42 714.63.43

P/Qty 1

Carbide-Tipped Marker

Set 6

in mm 8, 10, 12, 13, 17, 19

P/ Art. No. Qty 714.253.50 1

• Clear and precise marker. • Suitable for metal, glass, ceramics, tiles and plastic. • Marking pin is fixed into brass sleeve so not easily lost. • The gravity feed mechanism allows the pin to fall into the marking position when selected.

P/Qty 1

Art. No. 713.851.973

‘Stillson’ Pipe Wrench

• Steel. • Hardened and tempered jaws and adjusting nut. • As pressure is increased on the handle the jaws bite harder onto the work.

L mm 150

Art. No. 714.70.04

P/Qty 1

Scriber

• Knurled steel handle with screw in straight and bent tips. L mm 203 254 610

Jaw Capacity 19 mm 25 mm 64 mm

Art. No. 714.06.008 714.06.010 714.06.024

P/Qty 1

L mm www.winzerwurth.co.uk 235 CALL NOW! 0870 950 2800 FOR FURTHER DETAILS.

Art. No. 714.70.10

P/Qty 1

191

SCREWDRIVNG TOOLS, PLIERS, CLAMPS

S120 210 x 195 Customer Catalogue.qxp


S120 210 x 195 Customer Catalogue.qxp

26/11/2008

16:23

Page 192

Side Cutter

Number Punch

• Precision cuts in piano wire, hard, medium and soft metals and cables. • Specially jointed for long service life.

DIN 1451

Plier Assortment

• Contents: 1 x a) Combination Pliers, Art. No: 714.01.55, 1 x b) Side Cutters, Art. No: 714.01.52, 1 x c) Long Nose Pliers, Art. No: 714.01.57, 1 x d) Wire Cutters, Art. No: 714.01.50.

Size of figures mm 12

Art. No. 695.941.610

P/Qty 1

Letter Punch

• • • •

Size of letters mm 10

Art. No. 695.941.62

• With additional cutter. • Grips flat and round/tubular objects. • Cuts medium to hard metals and cables.

Ø mm Ø mm Ø mm Art. No. P/Qty 3.1 2.0 10 714.01.54 3.4 2.2 12 714.01.55 1 3.8 2.5 13 714.01.56

Nails/ Pins Serrated jaws

192

Ø mm 2.0 2.5 2.7

mm2 Art. No. 1.5 714.01.51 2.0 714.01.52 2.2 714.01.53

Cables

d

P/Qty 1 No. of Pieces 4 (a, b, c, d) 3 (a, c, d)

Straight nose pliers. With additional cutter. Cuts soft to hard metals and cables. Nose: flat / round.

Art. No. 714.01.60 714.01.61

P/Qty 1 1

Wire Strippers

• For wire dia. 5 to 10 mm2. • Adjustment screw & opening pressure spring.

P/Qty 1 L mm 210

Combination Pliers

L mm 170 180 200

Ø mm 3.1 3.4 3.8

Long Nose Pliers

DIN 1451

SCREWDRIVNG TOOLS, PLIERS, CLAMPS

L Ø mm mm 140 >4 160 >4 180 >4

c

b

a

Hard Piano Braided Wire Cable Flat/round Copper/Alu nose Cable

Art. No. 714.01.57

P/Qty 1

L mm 160

Art. No. 714.01.50

P/Qty 1

Telephone Pliers • • • •

Straight nose / jaws. With additional cutter. Cuts soft to medium metals and cables. Nose: flat / round.

L mm 160

Art. No. 714.01.59

P/Qty 1

ZEBRA = Our guarantee of reliability, optimum quality and longer life performance. Only products that provide outstanding and superior performance carry this name.

www.winzerwurth.co.uk CALL NOW! 0870 950 2800 FOR FURTHER DETAILS.


26/11/2008

Pipe Pliers

• Chrome-vanadium steel, hardened. • Jaws and tooth area induction hardened and polished. • PVC sleeved handles. • Easy one handed adjustments. • Self-clamping on pipes and nuts.

L mm 180 250 400

mm 1/8 - 1 1/8 - 1 1/8 1/8 - 2 1/2

16:25

Page 193

Mastergrip Pipe Pliers

• Easy and quick application with one hand. • The fixed teeth are designed with different radius and ensure an excellent hold with high strength. • Provides a kind of “ratchet function” that allows turning of the pipe without removing the pliers from it. • Heavy and solid construction, specific alloy steel. Teeth hardness 55-60HRC.

• Automatically adjust on the workpiece. • One hand operation. • Self locking on pipes and nuts.

• For cutting piano wire, hard, medium and soft metals. • Plastic dipped handles.

L mm 160

mm Art. No. P/Qty 10 - 30 715.02.33 10 - 36 715.02.23 1 10 - 65 715.02.34

Automatic Adjusting Pipe Pliers

Side Cutters

NEW! Opening Width 0.5 - 2”

Art. No. 714.06.335

Pack Qty 1

Wire Cutters

• For cutting piano wire, hard, medium and soft metals. • Plastic dipped handles.

Combination Pliers

• With additional cutter. • Cuts medium to hard metals. • Plastic dipped handles. L mm 160

NEW! Size 250mm

Art. No. 714.02.85

Pack Qty 1

Tower Pincers

Art. No. 715.02.04 715.02.05 715.02.06

L mm 200

P/Qty 1

Ø mm Ø mm Ø mm Art. No. P/Qty 3.5 2.5 2.2 715.01.78 1

Nails/Pins Ø mm 3.0

Ø mm 2.5

Art. No. P/Qty 715.01.76 1

Pincers

L mm 180 210 250

Hard Braided Cable

Piano Wire

External Circlip Pliers

• Suitable for external circlips 10 - 25 mm bore diameter. • 90° offset jaws. • Ø of points: 1.3 mm.

German Form

• Suitable for cutting wire mesh.

L mm 200 220 250

Ø mm Ø mm Ø mm Art. No P/Qty 3.5 2.5 2.0 715.01.71 1

Art. No. 715.02.01 715.02.02 715.02.03

P/Qty 1 L mm 140

CALL NOW! 0870 950 2800 FOR FURTHER DETAILS.

Art. No. 714.02.17

P/Qty 1

193

SCREWDRIVNG TOOLS, PLIERS, CLAMPS

S120 210 x 195 Customer Catalogue.qxp


S120 210 x 195 Customer Catalogue.qxp

26/11/2008

Internal Circlip Pliers

• Suitable for internal circlips 8 - 12 mm bore diameter. • Straight jaw. • Ø of points: 0.9 mm.

L mm 150

Art. No. 714.02.01

P/Qty 1

SCREWDRIVNG TOOLS, PLIERS, CLAMPS

• Suitable for internal circlips 8 - 12 mm bore diameter. • 90° offset jaws. • Ø of points: 0.9 mm.

Art. No. 714.02.06

Page 194

Contour Shears

• Forged shear head with serrated cutting edges. • Self opening with locking lever. • Cutting capacity; Sheet metal up to 1.8 mm, Stainless steel up to 1.2 mm.

Description Right hand

L mm 260

Art. No. 713.03.115

P/Qty 1

Sheet Metal Nibbler

With built in shearing tool.

• 2 different procedures in one operation shearing device removes the separated metal strip without leaving any burrs. No need to de-burr, saving time. • 2 hardened blades result in burr free corner cuts. • Cuts: 1.2 mm sheet metal and 2 mm copper, aluminium and plastic. • Sprung loaded self opening with locking lever. • Plastic tip protection.

Continuous Shears

Internal Circlip Pliers

L mm 140

16:26

P/Qty 1

Sheet Metal Shears

• Forged shear head with serrated cutting edges. • Self opening with locking lever. • Cutting capacity; Sheet metal up to 1.8 mm, Stainless steel up to 1.2 mm.

• Wide opening of Shears Jaws and flat forged serrated cutting edges enable cutting of very narrow radii. • Self opening (sprung loaded) with locking lever. • Serrated edges. • Cutting capacity, sheet metal up to 1.5 mm.

Description Right hand

L mm 210

Art. No. 714.03.02

P/Qty 1

Contour Shears

• The geometric form of the cutting edge and excellent leverage allows this shear to cut sheets of steel up to 1.8 mm. • Self opening (sprung loaded) with locking lever.

L mm 265

194

L mm 260

Art. No. 713.03.100 713.03.110

P/Qty

Description Right hand

L mm 260

Art. No. 714.03.11

P/Qty 1

Contour Shears

Description Right hand

L mm 250

Art. No. 714.03.08

P/Qty 1

Art. No. 714.03.15

P/Qty 1

Berlin Shears

Description Right hand Description Right hand Left hand

Art. No. 714.03.05

L mm 250

P/Qty 1

1

CALL NOW! 0870 950 2800 FOR FURTHER DETAILS.


S120 210 x 195 Customer Catalogue.qxp

26/11/2008

Carpet Knives

• Polished blades.

P/Qty 1

Gasket Shears

• For cutting rubber gaskets used in uPVC windows. • Hardened steel cutting blades. • PVC covered handles for non-slip grip. • Suitable for 90° and 45° cuts. • Max. gasket size that can be cut: Height: 25 mm, Width: 40 mm. • Anvil cutting action ensures clean cuts. • Blades can be locked shut.

L mm 250

Art. No. 714.03.17

P/Qty 1

Telephone and Cable Scissors • Fully nickel plated toothed blades.

Art. No. 714.03.50 714.03.501

P/Qty 1 1

P/Qty 1

5

Knives

L mm 125

Art. No. 714.03.16

P/Qty 1

Moon Knife L mm 255 Spare Blades & Anvil

Knife Type L mm Art. No. Retractable 715.66.01 blade Replacement Blades: Trapezium 60 715.66.02 shaped blade Hooked blade 50 715.66.03

• 10 cm long blade. • Top quality steel blade for extended service life. • Use to remove weld material from uPVC joints during manufacture.

Knife Type L mm Art. No. Retractable 150 715.66.04 blade Replacement Blades: Break off blade 100 715.66.05

P/Qty 1 10

Knives

Pelican Shears Art. No. 7151.4529

Description Right hand

L mm 300

Art. No. 714.03.13

P/Qty 1

P/Qty 1

NEXT DAY DELIVERY -

on orders placed before 3pm.

Knife Type L mm Art. No. Retractable 150 715.66.06 blade Replacement Blades: Break off blade 100 715.66.07

www.winzerwurth.co.uk CALL NOW! 0870 950 2800 FOR FURTHER DETAILS.

P/Qty 1 10

195

SCREWDRIVNG TOOLS, PLIERS, CLAMPS

• For thin sheet metal. • For left and right handed use.

Art. No. 714.03.14

Page 195

Upholsterers Shears

Combination Shears

L mm 190

16:28


S120 210 x 195 Customer Catalogue.qxp

26/11/2008

Trimming Knives

Page 196

Glass Scraper

• Supplied with 5 blades. • Made by Stanley.

One-handed Vacuum Lifter

• For lighter objects with smooth surfaces. • Carrying force vertical: 30 kg. • Ø of suction head approx. 120 mm.

Knife Type L mm Art. No. Exchangeable 170 715.66.08 blade Replacement Blades: Trapezium 60 715.66.02 shaped blade

P/Qty 1

Art. No. 7151.99E

16:30

Knife Blades

• Made by Stanley.

P/Qty 1 5

SCREWDRIVNG TOOLS, PLIERS, CLAMPS

Sprue Guide

• Often used in conjunction with the moon knife to obtain an even height on the upstand of knifed welds on uPVC joints. Description Normal duty Heavy duty Hooked

Art. No. 7151.1991B 7151.1991.100 7151.1992B 7151.1992.100 7151.1996B 7151.1996.100

P/Qty 1=5 1=100 1=5 1=100 1=5 1=100

Scraper

• For large, heavy objects with smooth surfaces. • Carrying force vertical: 120 kg. • Ø of suction head approx. 120 mm.

• Impact resistant handle. • Blade - single sided razor type, ultra thin. • Comes with plastic blade cover. Type Scraper Blades

196

Art. No. 714.663.31 714.663.312

Pack Qty 1 1 = 100

Weight g 1275

Art. No. 715.58.02

P/Qty 1

• For medium to heavy objects with smooth surfaces. • Carrying force vertical: 80 kg. • Ø of suction head approx. 120 mm.

Art. No. 714.58.04

P/Qty 1

Ratchet Lashing Belt

3-Arm Vacuum Lifter NEW!

Art. No. 715.58.01

2-Arm Vacuum Lifter

Weight g 660

P/Qty 1

Art. No. 7151.4530

Weight g 210

P/Qty 1

• One part. • Made of Polyester acc.to VDI 2701.

Belt Belt Max. Nom. L W load* tensile m mm kg st. kg 2 25 350 700 4 8 50 1000 2000 * according to VDI 2701

CALL NOW! 0870 950 2800 FOR FURTHER DETAILS.

Art. No P/Qty 713.92.20 713.92.10 1 713.92.11


26/11/2008

Ratchet Lashing Belt

• Two part. • Made of Polyester acc.to VDI 2701.

Belt Belt Max. Nom. L W load* tensile m mm kg st. kg 6 25 125 350 * according to VDI 2701

16:32

Page 197

Ratchet Lashing Belt

Automatic Vice-Grip Pliers

• Two part heavy duty. • Hook type: Triangle. • Made of Polyester acc.to VDI 2701.

• Fast, simple adjustment of the jaw clamping force with one hand. • Simple, reliable locking of the vice-grip pliers. • Smooth action release lever with spring mechanism. • Automatic self-adjustment to various material thicknesses with consistent clamp ing force. • Complete with wire cutter.

Art. No P/Qty 713.92.13 1

Ratchet Lashing Belt

• Two part heavy duty. • Made of Polyester acc.to VDI 2701.

NEW! Belt Belt Max. Nom. L W load* tensile m mm kg st. kg 10 50 2000 4000 * according to VDI 2701

Art. No P/Qty 713.92.19 1

NEW!

Vice Grips

• Max. jaw opening: 48 mm. • Curved jaws for enhanced grip. Belt Belt Max. Nom. L W load* tensile m mm kg st. kg 6 50 500 1000 * according to VDI 2701

Jaw Type Clamping width Art. No. P/Qty Long straight 0 - 51mm 714.09.030 1 Semi-circular 0 - 32mm 714.09.060 1 Semi-circular 0 - 47mm 714.09.080 1

Art. No P/Qty 713.92.14 1

Ratchet Lashing Belt

• Two part heavy duty. • Hook type: Claws. • Made of Polyester acc.to VDI 2701.

L mm 250

Art. No. 713.09.08

P/Qty 1

Welding Clamp

• With swivel end jaws.

Belt Belt Max. Nom. L W load* tensile m mm kg st. kg 10 50 2000 4000 * according to VDI 2701

Art. No P/Qty 713.92.18 1

L Max. jaw opening mm mm 150 50 280 95

Art. No. 713.09.22 713.09.23

P/Qty 1

Spring Clamp

• Suitable for onehanded use even at the maximum open NEW! ing width. • Light-weight, functional and easy to use. • Swivelling clamping arm. • Ergonomic 2 com ponent handle with soft material inserts. • Softpads ensure workpieces are effectively protected. Opening Width 100mm

Art. No. 714.661.901

CALL NOW! 0870 950 2800 FOR FURTHER DETAILS.

Pack Qty 1/12

197

SCREWDRIVNG TOOLS, PLIERS, CLAMPS

S120 210 x 195 Customer Catalogue.qxp


S120 210 x 195 Customer Catalogue.qxp

26/11/2008

SCREWDRIVNG TOOLS, PLIERS, CLAMPS

The Vacuum Bag Clamp The Würth Vacuum Bag Clamp is an easy to use, ver satile system providing the answer to clamping shaped panel work. This is an ideal tool for all workshops especially where there is no access to a press or where awkward shapes are being worked with. The system works by putting the work piece into the bag, sealing it in and then evacuating the air in the bag. This will provide an even 1 atmosphere around the work piece and will clamp shaped work that is not possible to clamp with conventional methods. Please call the number below, or your local sales consultant for more information. Size 8” x 4”

Art. No. 715.100.100

P/Qty 1

12” x 8”

715.100.102

1

• All steel. • Clamping forces are applied in seconds. • Design: swivelling lower jaw of galvanised steel. Sliding clamp clip with 7 latch positions, tempered cam, plastic coated locking and release catch. • The lever clamp is opened again just as quickly using the release lever.

198

Art. No 714.676.20 714.676.30

Page 198

Screw Clamps with Tempered Cast Jaws

• 6 sided sectional steel bars, electro galvanised. • Plastic protective caps. • Reinforced clamp jaws, high quality steel. • Burnished steel spindles with trapeziodal thread.

P/Qty 1

Additional Clamping Jaw

• Adding this jaw to the wooden clamps will allow 3-way clamping. • Ideal for edge banding on tables etc.

P/Qty 1

Art. No. 715.67.27

Solo Clamps

• Max. pressure: 250 kg. • Max. retained clamping force: 170 kg. • Can be used one handed. Span mm 120 200 250 250 300 400 800

Throat mm 60 100 100 120 120 120 175

Art. No. 714.671.12 714.671.20 714.671.25 714.672.25 714.672.30 714.672.40 714.672.80

P/Qty

1

Wooden Clamps

Fast Action Lever Clamps

Span mm Throat mm 200 100 300 140

16:33

• Infinitely variable pressure control. • No slippage due to cork seating surfaces. • Sturdily constructed from white beechwood with a bright galvanised steel bar.

Span mm 200 400

Throat mm 110

Art. No. 715.67.22 715.67.24

Description Metal jaw Plastic jaw

Span mm 150 150

Art. No. 6951.150M 6951.150P

P/Qty 1

One handed 'G' clamp

• Special knurled nut, allows one handed operation, allowing the other hand to hold the items being clamped. • 'I' beam frame section ensures maximum frame loading and resistance to yawn and twisting. • Square frame for maximum clamp usage.

P/Qty 1

Clamping range mm 103 x 62 154 x 78 204 x 87

CALL NOW! 0870 950 2800 FOR FURTHER DETAILS.

Art. No. 6951.04 6951.06 6951.08

P/Qty 1


26/11/2008

One Handed Clamp

• Throat: 100 mm. • Automatic clamp for one handed tightening and joint spreading. • Quick one handed operation. • Reverse clamping facility (exerts outward pressure when jaws are reversed). • Highly stable throughout clamping range. • Replaceable jaw pads. • Tempered steel bar with glass re-enforced composite body.

Clamp range mm 150 300 450 700

Span range mm 180 x 350 180 x 500 180 x 650 180 x 900

Measure (L x Wmax.) mm 260 x 355 260 x 505 260 x 655 260 x 905

Art. No. P/Qty. 714.662.150 714.662.300 714.662.450 1 714.662.700

Mitre Clamp

• Suitable for wood or metal work. • Jaws made of impact resistant composite material with nylon protectors. • Adjustable for mitre angles 45° to 120°.

Max. opening mm 105

Art. No. 715.67.32

P/Qty 1

16:35

Page 199

Sash Clamps

Maxifix Super Clamp 1

• Unique “No loss” pin locking adjusting system. • Heavy duty bar section. • Reverse clamping facility. • Full face jaws giving maximum surface contact. • Forged, red powder coated heads for maximum strength.

• • • • • • • •

Clamping capacity mm 610 760 915 1065 1220 1370 1675 Extension Bar 910 mm

Art. No. 6951.74.24 6951.74.30 6951.74.36 6951.74.42 6951.74.48 6951.74.54 6951.74.66 6951.74.136

P/Qty

1

Edge Clamps

• Suitable for clamping: edge bandings and edging strips onto curved and straight surfaces etc. • Clamps can be pushed on and tightened in seconds. • Excellent contact pressure, due to sprung loaded “D” shaped jaws. As clamp is tightened the jaws grip tighter, eliminating slippage.

For sheet thickness mm 45 (max.) 80 (max.)

Art. No. 715.67.40 715.67.41

Bar: Steel. Clamping jaw: Plastic coated steel. Clamping without lateral pressure. No padding required as pressure is distributed evenly over a width of 200 mm. No slip-off or damage to the objects surface due to PVC-coating. Clamping range from 150 mm to standard clamp length. Range thread: 60 mm. Distance between hole centres: 32 mm.

P/Qty 1

Clamping range mm 150 - 700 150 - 1000 150 - 1200 150 - 1600 300 - 2200

Art. No. 715.672.075 715.672.100 715.672.120 715.672.160 715.672.220

P/Qty 1

Maxi Clamp Components: Description Art. No. P/Qty Red Sleeve for Maxiclamps 715.678.8 1 Maxiclamp Pins 715.678.90 Screw Head & Sliding Block 715.678.1 1 pair & “V” Arms and Blocks 715.678.5 24 arms blocks Extra Height Blocks 711.678.6 Set of 4 Flat Clamps 711.678.7 1 pair

Power Clamp

• “Cam operated” powerful clamping action. • V groove jaws for round objects. • Will exert up to 3500 newtons (350 kg) clamping force. • Composite body with steel bar. • Soft jaws.

Clamping range mm 0 - 300 0 - 450 0 - 600

CALL NOW! 0870 950 2800 FOR FURTHER DETAILS.

Art. No. 714.661.230 714.661.245 714.661.260

P/Qty 1

199

SCREWDRIVNG TOOLS, PLIERS, CLAMPS

S120 210 x 195 Customer Catalogue.qxp


Turn static files into dynamic content formats.

Create a flipbook
Issuu converts static files into: digital portfolios, online yearbooks, online catalogs, digital photo albums and more. Sign up and create your flipbook.