Surface repair equipment for auto/car/motor-SYLVAN by Beijing Sylvan Automotive Equipment Co., Ltd

AUTO SURFACE REPAIR EQUIPMENT SERIES

Customization: Booth of every size, to meet every need INTRODUCTION OF SYLVAN SPRAY BOOTH Application Specialize in manufacturing single or double wall spray booths and metal enclosures for Automotive, Truck / Fleet or Industrial applications;

Features Provide solutions that deliver energy-savings, higher productivity, and enhanced performance and, ultimately, increased profitability for our customers;

Customization The dimension and functions could be designed according to clientsâ&#x20AC;&#x2122; special requirements The inherent design flexibility and in-house manufacture allows any booth to be tailored to suit individual dimension and performance requirements;

Services Full installation, maintenance programs, and technical support service proves successful in helping our clients unite their shop needs and comply with the high standards of environmental and air quality requirements;

Deluxe model

SF0101

Middle model

SF0102

Common model

SF0103

We supply customized spray booth for all industries: Items Dimension Position of Power System**

Floor

Notes Design accordingly Right Left Rear Checkered plate+Grating Grating HDG Grating

Basement** Wall Filler

Wall Plate (color plate)

Voltage Root Light Waterborne Paints Anti-explosion Fan Anti-explosion Motor Environmental Cabinet Control System

Optional EPS insulation board Rockwall Insulated Panel PU board (optional) 0.426mm 0.476mm 0.526mm 0.900mm 1.000mm 100~240V/1 phase 200~380V/3 phase Optional: add root lights on the inwall update spray booth for waterborne paints Optional Optional Water Curtain Cabinet Active Carbon Common Frequency converting control (touch screen)

**Power system position

Power system can be installed on left, right and rear side. We can also design steel structure sheds for protection against rain and wind

**Basement type

1. Raised floor with paint-stop filters, 300mm high metal basement, with outside ramps 2. Raised floor with paint-stop filters, 300mm high metal basement, with inside ramps 3. Base down into pit, 300mm high metal basement with paint-stop filters, without ramps 4. Two rows of grilles with paint-stop filters, exhaust air from pit, without ramps 5. Without basement, exhaust air from wall panels with holes, without ramps BEIJING SYLVAN AUTOMOTIVE EQUIPMENT CO.,LTD TEL: 86-10-56292661-10 86-10-56292661-16 ADD: Room 20C, Building A, Zhengdong International Plaza, Jia 2,Dongzhimen Waixiaojie, Dongcheng District, Beijing 100027, P. R. China WEB: WWW.SYLVAN.CO

AUTO SURFACE REPAIR EQUIPMENT SERIES

We supply 3 standard models for garages and workshops:

SPRAY BOOTH DELUXE MODEL SF0101

AUTO SURFACE REPAIR EQUIPMENT SERIES

SF0101

BEIJING SYLVAN AUTOMOTIVE EQUIPMENT CO.,LTD TEL: 86-10-56292661-10 86-10-56292661-16 ADD: Room 20C, Building A, Zhengdong International Plaza, Jia 2,Dongzhimen Waixiaojie, Dongcheng District, Beijing 100027, P. R. China WEB: WWW.SYLVAN.CO

SPRAY BOOTH

Total equipment dimension (mm )

External dimension(mm)

Internal dimension (mm)

Front door dimension (mm)

Power(KW)

8050*5250*6500

7050*3950*3450

6920*3820*2600

3030*2600

19KW

Booth cabin

Intake and exhaust fan system

Filter system

Sandwich style compound construction, thickness of wall panel 60mm, color of wall panel white. Upper plate is good galvanized steel plate. Both outside and inside door panel made by color steel plates, (Patent NO. 1037680) Safety door made by heat preservation panels. Special aluminum alloy column corners. (Patent NO. 1037680) The basement with 300mm high is made by steel plates and enhanced metal frame 5 rows of galvanized floor grids New ramps with external (full galvanized plates)and internal slope(inclined grids) Upper net is spring cotter type (Patent NO. 1041687), it is convenient to maintain and installment. It is unique, beauty appearance, Patent NO. zl033677042) sealing performance is good (Patent NO. 1037685). Back upper intake air 17.5KW intake fan and 17.5KW exhaust fan, direct drive centrifugal fan unit, both intake and exhaust room made by aluminum alloy frame, inner covered with galvanized sheets, outer covered color coated plate. It is heat preservation noise reduction beauty and durable. Intake and exhaust fan tube is with galvanized steel sheets made up of flanges. No-load air volume 0.25m/s Air damper by cylinder control. Exhaust tube stop return air device (Patent NO.1038055) Intake air filter is high efficiency ceiling filter the primary filter can effectively capture the dust particles over 10m. The primary intake filter can effectively capture the dust particles over 5m. Exhaust filter below rows is high efficiency fiberglass filter (Patent NO1037997) Equipped with different pressure gauge

Heating system

Italy Riello burner, heating capacity 180000kcat/h Stainless steel heat exchanger. Argon arc welding. Equipped with mechanical temperature controller. Left heat recovery device. (cold area can use)

Lighting

Upper ceiling light 430W 8 units Side light 430W 6 units, aluminum alloy frame, with safety lock, open grass then cut off the electricity automatically. Illuminationâ&#x2030;Ľ1000Lux

Electric control system

Components with UL (CE) list. The main circuit with multiple protections equipped with lighting switch, temperature time setting normal spray painting, thermostatic spray-painting baking switch, and emergency stop breakdown alarm timer. Floor stand type controller(variable frequency drives)

Noise/waste gas treatment

Noiseâ&#x2030;¤80db, activated carbon filter, waste gas achieve Atmospheric Pollutants Comprehensive Discharge Standards GB16297-1996 national standard.

AUTO SURFACE REPAIR EQUIPMENT SERIES

(1)Floor Grating (2) Bottom Filters (3) Supporting Filter Frame (4) Light Fixtures (5) Ceiling Filters (6) Control Cabinet (7) Direct Fired Gas Burner (8) Circulating Damper (9) Intake Filter (10) Intake Fan (11) Exhaust Filter (12) Exhaust Fan (13) Mechanical Temperature Sensor (14) Pneumatic Device (15) Enhanced Curing System (16) Intake Air Duct (17) Exhaust Air Duct (18) Main Door (19) Personnel Door (20) Manometer

SPRAY BOOTH

AUTO SURFACE REPAIR EQUIPMENT SERIES

MIDDLE MODEL SF0102

SF0102

Total equipment dimension (mm) External dimension(mm)

Internal dimension (mm)

Front door dimension (mm)

Power(KW)

8050*5250*5900

6920*3820*2600

3030*2600

17KW

7050*3950*3450

Booth cabin

Intake and exhaust fan system

Back upper intake air 17.5KW intake fan and 17.5KW exhaust fan, direct drive centrifugal fan unit, both intake and exhaust room made by aluminum alloy frame, inner covered with galvanized sheets, outer covered color coated plate. It is heat preservation noise reduction beauty and durable. Intake and exhaust fan tube is with galvanized steel sheet made up of flanges. No-load air volume 0.25m/s Air damper by cylinder control.

Filter system

Intake air filter is high efficiency ceiling filter the primary filter can effectively capture the dust particles over 10m. The primary intake filter can effectively capture the dust particles over 5m. Exhaust filter below rows is high efficiency fiberglass filter. Equipped with mechanical temperature controller.

Heating system

Italy Riello burner, heating capacity 180000kcat/h Stainless steel heat exchanger. Argon arc welding. Equipped with mechanical temperature controller.

Lighting

Upper ceiling light 430W 8 units Side light 430W 6 units, aluminum alloy frame, with safety lock, open grass then cut off the electricity automatically. illuminationâ&#x2030;Ľ1000Lux

Components with UL (CE) list. Electric The main circuit with multiple protections equipped with lighting switch, temperature time setting normal spray painting, control system thermostatic spray-painting baking switch, and emergency stop breakdown alarm timer. Wall type controller. Noise/waste Noiseâ&#x2030;¤80db, activated carbon filter, waste gas achieve Atmospheric Pollutants Comprehensive Discharge Standards gas treatment GB16297-1996 national standard. BEIJING SYLVAN AUTOMOTIVE EQUIPMENT CO.,LTD TEL: 86-10-56292661-10 86-10-56292661-16 ADD: Room 20C, Building A, Zhengdong International Plaza, Jia 2,Dongzhimen Waixiaojie, Dongcheng District, Beijing 100027, P. R. China WEB: WWW.SYLVAN.CO

SPRAY BOOTH COMMON MODEL SF0103

Total equipment dimension (mm)

External dimension(mm)

Internal dimension (mm)

Front door dimension (mm)

Power(KW)

7800*5550*5200

6800*3950*3450

6670*3820*2600

2400*2600

13KW

Booth cabin

Sandwich style compound construction, thickness of wall panel 60mm, color of wall panel white. Upper plate is good galvanized steel plate. Front door and safety door made by heat preservation panels. Special aluminum alloy column corners (Patent NO.1037680) The basement with 300mm high is made by steel plates and enhanced metal frame 2 rows of galvanized floor grids, 3 rows cover plate New ramps with external (full galvanized plates)and internal slope(inclined grids) Upper net is spring cotter type, it is convenient to maintain and installment. Patent NO.1041687 It is unique, beauty appearance (Patent NO.zl033677042), sealing performance is good (Patent NO.1037685).

Intake and exhaust fan system

Side upper intake air Intake fan 24KW centrifugal fan, exhaust fan 14KW axial fan Both intake and exhaust room made by aluminum alloy frame, inner covered with galvanized sheets, outer covered color coated plate. It is heat preservation noise reduction beauty and durable. Intake and exhaust fan tube is with galvanized steel sheets made up of flanges. No-load air volume 0.25m/s Air damper by cylinder control.

Filter system

Heating system

Domestic burner, heating capacity 180000kcat/h Stainless steel heat exchanger. Argon arc welding.

Lighting

Upper ceiling light 430W 8 units aluminum alloy frame, Illuminationâ&#x2030;Ľ800Lux

Electric control system

Adopt the high quality electronic components. The main circuit with multiple protections equipped with lighting switch, temperature time setting normal spray painting, thermostatic spray-painting baking switch, and emergency stop breakdown alarm timer. Wall type controller.

Noise/waste Noiseâ&#x2030;¤80db, activated carbon filter, waste gas achieve Atmospheric Pollutants Comprehensive Discharge Standards GB16297gas treatment 1996 national standard.

AUTO SURFACE REPAIR EQUIPMENT SERIES

SF0103

SPRAY BOOTH

Spray Booth for Truck Painting

SF0104 SF0105 SF0106 SF0107

AUTO SURFACE REPAIR EQUIPMENT SERIES

Configuration

Optional Configuration Table

Item

SF0104

SF0105

Interior Dimension

10000×5000×5000mm(L×W×H)

15000×5000×5000mm(L×W×H)

Exterior Dimension

10144×6896×5600mm (L×W×H)

15144×6896×5600mm (L×W×H)

Front/Rear Door

2pcs, double-door, Main Door×4, 4000×4500mm (W×H),thickness=70mm, wallboard with EPS

2pcs,double-door,MainDoor×4,4000×4500mm(W×H),thi ckness=70mm, wallboard with EPS

Personnel Door

1pcs, 800×2000mm(W×H); Pressure lock and glass observation window

2pcs, 800×2000mm(W×H); COLOR: WHITE

Wallboard

1.room body: 3pcs x structural steel stiffener in the middle; 3pcs x structural steel composite beam on the 1.wallboard: color platetop thickness=70mm,δ=0.476mm,socket type ,width=1150 2.wallboard: color platemm, EPS thickness=70mm,δ=0.476mm,socket type ,width=1150 2.the room body frame: 0.8 galvanized steel plate mm, EPS 3.the room body frame: 0.8 galvanized steel plate

10144×8106×5600mm (L×W×H)

SF0106

SF0107

Lighting

Ceiling light:2 rowsX10pcs×4, totally 80pcs×36W Bottom light:12pcs×4 totally 48pcs×36W (left/6,right/6) three primary colors modulator tube(Philips),DSH-IIIB ballast,≥600LUX

Exhaust Air Type

Pit extraction -840mm ground grid x 2 -Gutter size:8000×840 mm(L×W)x2

pit extraction -840mm ground grid x 2 -Gutter size: 13000×840 mm(L×W)x2

Control Cabinet

Inlet air: top, outlet: rear, frame: square steel tube

Intake & Exhaust System

Heating System

two sides extraction,600x900mm(W x H) exhaust air filter box X 2 Inlet air: top, outlet: rear, frame: square steel tube

(1pcs)

(2pcs)

1.the air handing unit is made of spray proximate matter and steel plate, galvanized steel plate 2.2×double inlet centrifugal fan made by Siemens,single fan’s specifications:model: SW5.6M,power:7.5KW,air volume:20,000m3/ h.total:40,000m3/h

1.the air handing unit is made of spray proximate matter and steel plate, galvanized steel plate 2.4×double inlet centrifugal fan made by Siemens,single fan’s specifications.model: SW5.6M.power.7.5KW.air volume.20,000m3/h total:80,000m3/h

Exhaust Fan: 1×double inlet centrifugal fan,single fan’s model and specifications: model:SW710H\power:11KW\air volume:36,000m3/h\Total: 36,000m3/h

Exhaust Fan: 2×double inlet centrifugal fan,single fan’s model and specifications: model:SW710H\power:11KW\air volume:36,000m3/ h\pressure:1076Pa\belt drive Total: 72,000m3/h

Exhaust Fan: 2×double inlet centrifugal fan,single fan’s model and specifications: model:SW5.6M\power:7.5KW\air volume:20,000m3/h\Total: 40,000m3/h

Exhaust Fan: 4×double inlet centrifugal fan,single fan’s model and specifications: model:SW5.6M\power:7.5KW\air volume:20,000m3/hTotal: 80,000m3/h

(2pcs)

1 pcs RG5S fuel oil burner,1 pcs stainless steel heat exchanger,1pcs Electric damper from spraying to baking cycle Max calorific value:260,000Kcal/h.

2 pcs RG5S fuel oil burner,2 pcs stainless steel heat exchanger,2pcs Electric damper from spraying to baking cycle Max calorific value:560,000Kcal/h.

Filter System

filter bag, top cotton filter, fiberglass filter, M-type glass filter bag, Top cotton filter, Fiberglass filter, Activated fiber filter, activated carbon filter carbon filter

Upper Plate

Single-deck metal bending plate.

Electric Control System

Spray paint\warming up paint\baking varnish\drying time setting\lighting switch\Malfunction indicator lamp\temperature controller, power switch,Emergency Stop Switch, cumulative time meter, temperature limiter.

Spray paint\warming up paint\baking varnish\drying time setting\lighting switch\Malfunction indicator lamp\ temperature controller, power switch, Emergency Stop Switch, cumulative time meter, temperature limiter

Voltage& Frequency

230V-400 V, 60 HZ

Luminance

≥600LUX

Max Temperature

80˚C

Air Speed

≥0.22m/s

≥0.28m/s

Motor Power

29.5KW

57.5KW

(2pcs)

1pcs RG5S fuel oil burner,1pcs stainless steel heat exchanger,2pcsElectric damper from spraying to baking cycle,Max calorific value:260,000Kcal/h.

2pcs RG5S fuel oil burner,2pcs stainless steel heat exchanger,2pcsElectric damper from spraying to baking cycle,Max calorific value:560,000Kcal/h.

3D Workbench

height 500-4000mm Horizontal scope 9001200mm Vertical scope 9000mm power:3KW quantity:2pcs

Height 500-4000mm Horizontal scope 9001200mm Vertical scope 14000mm power:3KW quantity:2pcs

MotorDriven Carrier

3X3m(LxW) load capacity:5T

5X5m(LxW) load capacity:5T

(Pw0110)

(W1.6/1.25)

Power(Kw/Hp):7.5/10 Max Pressure(Bar):8 Air. Delivery(L/Min):900 Tank(L):170 Available for 2spray guns

Power(Kw/Hp):11/15 Max Pressure(Bar): 8 Air. Delivery(L/Min):1800 Tank(L):320 Available for 4 spray guns

Heating System

Air Compressor

Installation and Training Expense Installation and training

SF0104\SF0105

SF0106\SF0107

4 persons, 15days

6persons, 20days

Easy-Wear List SF0104\SF0105 \SF0106\SF0107

(1pcs)

33.5KW

SF0106\SF0107

(1pcs)

15144×8106×5600mm (L×W×H)

Ceiling light:2 rowsX6pcs×4, totally 48pcs×36W Bottom light:8pcs×4 totally 32pcs×36W (left/4\right/4) three primary colors modulator tube(Philips),DSH-IIIB ballast,≥600LUX Two sides extraction,600x900mm(W x H) exhaust air filter box X 2

SF0104\SF0105

66KW

Serial Name No.

Model

Qty.

Primary Filter Cotton

Intake Fan Filter

40m²

Efficient Filter Cotton

Top Exhaust Fan Filter

80m²

Paint Filter Cotton

Bottom Exhaust Fan 40m² Filter

Activated Carbon Filter Cotton

Exhaust Fan Filter

Lighting Tube

10pcs

Electric Control Indicator Light

5pcs

Electric Control Relay

3pcs

30m²

3D Drawing

SF0104

AUTO SURFACE REPAIR EQUIPMENT SERIES SF0105

3D Drawing

AUTO SURFACE REPAIR EQUIPMENT SERIES

SF0106

SF0107

SPRAY BOOTH

Spray Booth for Truck Painting

SF0111 SF0112

Optional Configuration Table

Configuration SF0111

SF0112

Interior Dimension

10000×7000×7000mm (L×W×H)

15000×7000×7000mm (L×W×H)

Exterior Dimension

10144×8746×7600mm (L×W×H)

15144×8896×7600mm (L×W×H)

Front/Rear Door

2pcs, double-door, Main Door×5, 5000×5600mm(W×H),thickness=75mm, wallboard with EPS

2pcs,double-door,MainDoor×5, 5000×5600mm(W×H),thickness=75mm, wallboard with EPS

Personnel Door

1pcs, 800×2000mm(W×H); Pressure lock and glass observation window

2 pcs, 800×2000mm(W×H); color: white

Wallboard

1.wallboard: color platethickness=70mm,δ=0.476mm. socket type ,width=1150 mm, EPS 2.the room body frame: 0.8 galvanized steel plate

1.room body: 4pcs x structural steel stiffener in the middle; 4pcs x structural steel composite beam on the top 2.wallboard: color platethickness=70mm,δ=0.476mm,socket type ,width=1150 mm, EPS 3.the room body frame: 0.8 galvanized steel plate Ceiling light:3 rowsX10pcs×4, totally 120pcs×36W Bottom light:12pcs×4 totally 48pcs×36W (left/6,right/6) three primary colors modulator tube(Philips),DSH-IIIB ballast:≥800LUX

Air Compressor

Lighting

Ceiling light:3 rowsX6pcs×4, totally 72pcs×36W Bottom light:12pcs×4 totally 48pcs×36W (left/4,right/4) three primary colors modulator tube(Philips),DSH-IIIB ballast:≥800LUX

Exhaust Air Type

Gutter exhaust -840mm ground grid x 3 -Gutter size:8000×840 mm(L×W)x3

Gutter exhaust -840mm ground grid x 3 -Gutter size:13000×840 mm(L×W)x3

Control Cabinet

Inlet air: top, outlet: rear, frame: square steel tube

Intake & Exhaust System (2pcs)

Heating System (2pcs)

1.the air handing unit is made of spray proximate matter and steel plate, galvanized steel plate 2.4×double inlet centrifugal fan made by Siemens,single fan’s specifications,model: SW4.5M,power:5.5KW,air volume:15,000m3/h total:60,000m3/h

1.the air handing unit is made of spray proximate matter and steel plate, galvanized steel plate 2.4×double inlet centrifugal fan made by Siemens,single fan’s specifications,model: SW5.6M,power:7.5KW,air volume:20,000m3/ h total:80,000m3/h

Exhaust Fan: 2×double inlet centrifugal fan,single fan’s model and specifications: model:SW-560H,power:7.5KW,air volume:27,000m3/h,pressure:1076Pa,belt drive Total: 54,000m3/h

Exhaust Fan: 2×double inlet centrifugal fan,single fan’s model and specifications: model:SW-710H,power:15KW,air volume:36,000m3/h,pressure:1076Pa,belt drive Total: 72,000m3/h

2 pcs RG5S fuel oil burner:2 pcs stainless steel heat exchanger:2pcs Electric damper from spraying to baking cycle Max calorific value:400,000Kcal/h.

2 pcs RG5S fuel oil burner:2 pcs stainless steel heat exchanger:2pcs Electric damper from spraying to baking cycle Max calorific value:560,000Kcal/h.

Filter System

lter bag, Top cotton filter, Fiberglass filter, Activated carbon filter

Upper Plate

Single-deck metal bending plate.

Electric Control System

Spray paint,warming up paint,baking varnish,drying time setting,lighting switch,Malfunction indicator lamp,temperature controller, power switch,Emergency Stop Switch, cumulative time meter, temperature limiter,

Voltage& Frequency

230V-400 V, 60 HZ

Luminance

≥600LUX

Max Temperature

80˚C

Air Speed

≥0.20m/s

Motor Power

42KW

60KW

SF0112 (2pcs)

(2pcs)

2pcs G20 fuel oil burner,2pcs stainless steel heat exchanger,2pcsElectric damper from spraying to baking cycle.Max calorific value:400,000Kcal/h.

4pcs RG5S fuel oil burner,4pcs stainless steel heat exchanger,4pcsElectric damper from spraying to baking cycleMax calorific value:560,000Kcal/h.

3D Workbench

Height 500-4000mm Horizontal Scope 9001200mm Vertical Scope 24000mm Power:3KW Quantity:2pcs

Motor-Driven Carrier

5X5m(LxW) load capacity:5T

(Pw0110)

(W1.6/1.25)

Power(Kw/Hp):7.5/10 Max Pressure(Bar):8 Air. Delivery(L/Min):900 Tank(L):170 Available for 2spray guns

Power(Kw/Hp):11/15 Max Pressure(Bar):8 Air.Delivery(L/Min):1800 Tank(L):320 Available for 4spray guns

Heating System

Easy-Wear List SF0111\SF0112 Serial No.

Name

Model

Qty.

Primary Filter Cotton

Intake Fan Filter

40m²

Efficient Filter Cotton

Top Exhaust Fan Filter

80m²

Paint Filter Cotton

Bottom Exhaust Fan Filter

40m²

Activated Carbon Filter Cotton

Exhaust Fan Filter

30m²

Lighting Tube

10pcs

Electric Control Indicator Light

5pcs

Electric Control Relay

3pcs

Installation and Training Expense Installation and training

SF0111

SF0112

4 persons, 10days

4 persons, 12days

AUTO SURFACE REPAIR EQUIPMENT SERIES

SF0111

Item

3D Drawing

AUTO SURFACE REPAIR EQUIPMENT SERIES

SF0111

SF0112

SPRAY BOOTH Spray booth for Bus Painting

SF0109

SF0110

SF0113

3D Drawing

SF0108 BEIJING SYLVAN AUTOMOTIVE EQUIPMENT CO.,LTD TEL: 86-10-56292661-10 86-10-56292661-16 ADD: Room 20C, Building A, Zhengdong International Plaza, Jia 2,Dongzhimen Waixiaojie, Dongcheng District, Beijing 100027, P. R. China WEB: WWW.SYLVAN.CO

AUTO SURFACE REPAIR EQUIPMENT SERIES

SF0108

SPRAY BOOTH

AUTO SURFACE REPAIR EQUIPMENT SERIES

Configuration Item

SF0108 Pit Extraction

Interior Dimension

20000×5000×5000mm(L×W×H)

Exterior Dimension

20144×6896×5600mm (L×W×H)

Front/Rear Door

SF0110 Truck Spray Booth

SF0113 Industry Spray Booth

25000×8000×5500mm(L×W×H)

20000×7000×7000mm(L×W×H)

25144×9896×6000mm(L×W×H)

20144×8896×7600mm(L×W×H)

2sets, double-door, Main Door×5, 4000×4500mm (W×H),thickness=75mm, wallboard with EPS

2pcs,double-door, Main Door×6, 6000×5000mm(W× H),thickness=75mm, wallboard with EPS

2sets, double-door, Main Door×5, 5000×5600mm(W×H) ,thickness=75mm, wallboard with EPS

Personnel Door

2 sets, 800×2000mm(W×H);Pressure lock and glass observation window

2 pcs, 800×2000mm(W×H),Pressure lock and glass observation window

2pcs, 800×2000mm(W×H); Pressure lock and glass observation window

Wallboard

1.room body: 4pcs x structural steel stiffener in the middle; 4pcs x structural steel composite beam on the top 2.wallboard: color plate-thickness=75mm,δ=0.476mm,socket type ,width=1150 mm, EPS 3.the room body frame: 0.8 galvanized steel plate

1.room body: 5pcs x structural steel stiffener in the middle; 5pcs x structural steel composite beam on the top 2.wallboard: color platethickness=75mm,δ=0.476mm,socket type ,width=1150 mm, EPS 3.the room body frame: 0.8 galvanized steel plate

1.room body: 4pcs x structural steel stiffener in the middle; 4pcs x structural steel composite beam on the top 2.wallboard: color platethickness=75mm,δ=0.476mm,socket type ,width=1150 mm, EPS 3.the room body frame: 0.8 galvanized steel plate

Lighting

Ceiling light:2rowsX13sets×4, totally 104pcs×36W three primary colors modulator tube(Philips),DSH-IIIB ballast,≥600LUX

Ceiling light:4 rowsX14 pcs×4, totally 224pcs×36W Bottom light:41 pcs×2, totally 82pcs×36W Philips lam p,(left/18,right/18,rear/5pcs) three primary colors modulator tube(Philips),DSH-IIIB ballast:≥800LUX

Ceiling light:3rowsX13sets×4, totally 156pcs×36W Bottom light:16 pcs×4, totally 64pcs×36W (left/8,right/8) three primary colors modulator tube(Philips),DSH-IIIB ballast:≥800LUX

Exhaust Air Type

pit extraction -840mm ground grid x 2 -Gutter size:18000×840 mm(L×W) x2

two sides extraction,600x900mm(W x H) exhaust air filter box X 2

Gutter exhaust -840mm ground grid that made of 30×4steel plate x 3 -Gutter size:23000×840 mm(L×W)x3

Gutter exhaust -840mm ground grid x 3 -Gutter size:18000×840 mm(L×W)x3

Control Cabinet

Inlet air: top, outlet: rear, frame: square steel tube

(3pcs)

Intake & Exhaust System

Heating System

SF0109 Side Extraction

20144×8106×5600mm (L×W×H)

(4pcs)

(3pcs)

1. the air handing unit is made of spray proximate matter and steel plate, galvanized steel plate 2.6×double inlet centrifugal fan made by Siemens,ingle fan’s specifications,model: SW5.6M,power,7.5KW,air volume,20,000m3/ h Total: 120,000m3/h

1.the air handing unit is made of spray proximate matter and steel plate, galvanized steel plate 2.8×double inlet centrifugal fan made by Siemens,single fan’s specifications,model: SW5.6M,power:7.5KW,air volume:20,000m3/h Total:160,000m3/h

1.the air handing unit is made of spray proximate matter and steel plate, galvanized steel plate 2.6×double inlet centrifugal fan made by Siemens,single fan’s specifications,model: SW5.6M,power:7.5KW,air volume:20,000m3/h Total: 120,000m3/h

Exhaust Fan: 3×double inlet centrifugal fan,single fan’s model and specifications: model:SW-710H\power:15KW\ air volume:36,000m3/ h\pressure:1076Pa\belt drive Total: 108,000m3/h

Exhaust Fan: 6×double inlet centrifugal fan,single fan’s model and specifications: model:SW5.6M\power:7.5KW\air volume:20,000m3/h. Total: 120,000m3/h

Exhaust Fan: 4×double inlet centrifugal fan,single fan’s model and specifications: model:LSW710H,power:15KW,air volume:36,000m3/ h,pressure:1076Pa,belt drive total:144,000m3/h

Exhaust Fan: 3×double inlet centrifugal fan,single fan’s model and specifications: model:SW710H,power:15KW,air volume:36,000m3/ h,pressure:1076Pa,belt drive Total: 108,000m3/h

(3pcs)

(3pcs) 3 pcs RG5S fuel oil burner,3 pcs stainless steel heat exchanger,3pcs Electric damper from spraying to baking cycle Max calorific value:780,000Kcal/h.

3 pcs RG5S fuel oil burner,3 pcs stainless steel heat exchanger,3pcs Electric damper from spraying to baking cycle Max calorific value:780,000Kcal/h.

Filter System

filter bag, Top cotton filter, Fiberglass filter, Activated carbon filter

Upper Plate

Single-deck metal bending plate.

Single-deck metal bending plate

Electric Control System

Spray paint\warming up paint\baking varnish\drying time setting\ lighting switch\Malfunction indicator lamp\temperature controller, power switch, Emergency Stop Switch, cumulative time meter, temperature limiter

Spray paint,warming up paint,stoving varnish,drying time setting,lighting switch,Malfunction indicator lamp,temperature controller, power switch,Emergency Stop Switch, cumulative time meter, temperature limiter

Spray paint,warming up paint,baking varnish,drying time setting,lighting switch,Malfunction indicator lamp,temperature controller, power switch, Emergency Stop Switch, cumulative time meter, temperature limiter

Voltage& Frequency

230V-400 V, 60 HZ

Luminance

≥600LUX

Max Temperature 80˚C

80˚C

Air Speed

≥0.30m/s

≥0.20m/s

Motor Power

85KW

120KW

90KW

97KW

Color

Optional: white, blue, red and orange-yellow

Optional Configuration Table

Installation and Training Expense

SF0110

SF0108\SF01109\SF0113

(4pcs)

(3pcs)

4pcs RG5S fuel oil burner,4pcs stainless steel heat exchanger,4pcs Electric damper from spraying to baking cycle. Max calorific value:1,040,000Kcal/h.

3 pcs RG5S fuel oil burner,3 pcs stainless steel heat exchanger,3pcs Electric damper from spraying to baking cycle. Max calorific value:780,000Kcal/h.

Installation and training Heating System

3D Workbench

Height 500-4000mm Horizontal Scope 900-1200mm Vertical Scope 24000mm Power:3KW Quantity:2pcs

Motor-Driven Carrier

5X5m(LxW) load capacity:5T

(W1.6/1.25)

Power(Kw/Hp):11/15 Max Pressure(Bar):8 Air. Delivery(L/Min):1800 Tank(L):320 Available for 4spray guns

Air Compressor

SF0108\SF0109

SF0110

SF0113

6persons, 25days

5persons, 25days

5 persons, 20days

Easy-Wear List SF0108\SF0109\SF0110\SF0113 Serial No.

Name

Model

Qty.

Primary Filter Cotton

Intake Fan Filter

40m²

Efficient Filter Cotton

Top Exhaust Fan Filter

180m²

Paint Filter Cotton

Bottom Exhaust Fan Filter

70m²

Activated Carbon Filter Cotton

Exhaust Fan Filter

50m²

Lighting Tube

20pcs

Electric Control Indicator Light

10 pcs

Electric Control Relay

5 pcs

3D Drawing

SF0109

SF0113

AUTO SURFACE REPAIR EQUIPMENT SERIES

SF0110

AUTO SURFACE REPAIR EQUIPMENT SERIES

DETAILED PICTURES

Accessories 1-Basement The whole surface is treated by powder coated finishing or galvanized plates , Can effectively prevent rust and wear well. The special adjustable bottom legs can meet the requirement of uneven ground. The unique bottom supporting frame can be adjusted optionally to ensure the air velocity even inside the booth. We can provide the optional floor structures such as the full galvanized gratings, half-gratings, and slope-build-in type ramps, with the loading capacity up to several tons.

2-Lighting Fixtures The surface of lighting is treated by powder coated finishingďź&#x152;good appearance and? durable. The lighting fixtures contain the top lights and side lights with total illumination reaches 1200 Lux, Each group of lighting fixture contains 4 fluorescent tubes, Ensure the lighting in the whole booth cabin is The light is more even and gentle, without any shadows. The whole light fixtures are pre-wired in each wall panel to reduce the installation cost, and also make it in compliance with the local electricity requirements. Each lighting fixture is equipped with microswitch button,with the self-locking & power failture function. The position and number of lighting fixtures are designed by ourselves and can meet different requirements of customers, the glass frame adopts the hinge structure, and the maintenance personnel can conveniently open the cover of glass frame inside or outside the booth cabin.

3-Filters The ceiling filters can effectively filtering 10 micron particles,with filtration efficiency upto 99%.The filter supporting bracket use spring hook structure, it is suitable for single man operation and easy for replacing the ceiling filters. The Primary filter reduces the pollution on ceiling filters. The fiberglass filters which were mounted under the floor grids and in front of the exhaust fan can effectively filtrate the paint mist.

4-Double Wall Panels The Internal and external sprayed double wallboard, with rock wool or EPS insulated, can keep long durability at least 20 years. The Socket type structure has good sealing performance; it can effectively prevent the heat from escaping to the outside room and keep the room dust-free.

Accessories 5-Heating System The heat exchanger is made of imported high temperature resistant stainless steel plates after welding process through scientific design and production, the heat exchanger efficiency is up to 90%. It is optional to choose light oil or gas burner; we can also provide the direct firing burners.

6-Fan

7-Control Panel The pre-wired control panel can achieve a series of automatic operation like paint spraying - flow leveling â&#x20AC;&#x201C; baking - cooling down to comply with all kinds of industry standard. All components are UL or CE certified. All the electric wirings pre-assembled inside the control box are compact and easy for maintenance. The digital temperature control system can effectively guarantee simple running for different operations. It can be equipped with PLC control system and variable speed drives to motors, the touch screen operation system can achieve a simple, clear and fullyautomatic operation.

8-Enhanced Curing System-Air Nozzles In the process of air supply, the enhanced curing system provides a new standard, after operating by pressing the button; the filtered air will be blown onto the painted surface thru the adjustable, multi-direction, large diameter nozzles. It makes the curing and solvent volatilization time for the water-borne coatings greatly reduced.

AUTO SURFACE REPAIR EQUIPMENT SERIES

The surface of lighting is treated by powder coated finishing,good appearance and? durable. The lighting fixtures contain the top lights and side lights with total illumination reaches 1200 Lux, Each group of lighting fixture contains 4 fluorescent tubes, Ensure the lighting in the whole booth cabin is The light is more even and gentle, without any shadows. The whole light fixtures are pre-wired in each wall panel to reduce the installation cost, and also make it in compliance with the local electricity requirements. Each lighting fixture is equipped with microswitch button,with the self-locking & power failture function. The position and number of lighting fixtures are designed by ourselves and can meet different requirements of customers, the glass frame adopts the hinge structure, and the maintenance personnel can conveniently open the cover of glass frame inside or outside the booth cabin.

GRINDING BOOTH Without Basement Grinding Booth

AUTO SURFACE REPAIR EQUIPMENT SERIES

SF0201\SF0202 Outer dimension

7050*3950*3450

Internal dimension

6920*3820*2600

Color

White

Top light

4*2units

Light tube

4*30W*8(philips)

Electroplax

SF0201

With Basement Grinding Booth

Top sheet material

Single layer galvanized plates

The thickness of top plate

0.8

Top filter supporting bracket

The steel system of C

Top filtration

600G

Power of exhaust fan

7.5kw direct drive type

Volume of intake fan

25000M3/H

Exhaust model

filter(filter cotton)

Construction

Section bar(frame)

Outer plates and thickness

0.6 color steel plates

The material and thickness of internal plate

0.6 stamping galvanized plate

curtain

three sides curtain

Noise

â&#x2030;¤75

Electric controller

suspension type

Note

"three sides curtain: nalso can three sides plates and one side curtain Electric controller: With good electric components, the main circuit with multiple protection, with lighting switch, emergency stop, breakdown stop SF0202Basement: 300mm high with good steel and highduty steel"

SF0202

PAINT CURING LAMP

Features

-- Aluminum upright column reduces the weight of whole machine Philips or Vpower 21 inch shortwave infrared quartz halogen lamp -- Automatic devices, with electronic timer -- The angle of lamp panel can be adjusted in the lengthwise and lateral directions -- 1nput voltage: lph230V 5/1 OA 50/60Hz -- Power 1000W(l lamp) 2000W(2 lamps) -- Temperature range:40°C-80°C -- Adjustable time setting -- The low and high temperature automatic switch is specially set due to the very quick heating speed of halogen lamp panel -- Super-low and wide chassis can be applied to the low-chassis automobile and widthwise pass through tire

SF0402

Features

-- Aluminum upright column reduces the weight of whole machine Philips or Vpower 21 inch shortwave infrared quartz halogen lamp -- Automatic devices, with electronic timer -- The angle of lamp panel can be adjusted in the lengthwise and lateral directions -- Input voltage: 1 ph230V 5/1 OA 50/60Hz -- Power:2000W(2 lamps) 3000W(3 lamps) 6000W(6 lamps) -- Temperature range:40<C-801C -- Adjustable time setting -- The low and high temperature automatic switch is specially set due to the very quick heating speed of halogen lamp panel Super-low and wide chassis can be applied to the low-chassis automobile and widthwise pass through tire

-- Aluminum upright column reduces the weight of whole machine -- Philips or Vpower 21 inch short-wave infrared quartz halogen lamp -- Automatic devices, with electronic timer -- The angle of lamp panel can be adjusted in the lengthwise and lateral directions -- Power:2000W(2 lamps) 3000W(3 lamps) 6000W(6 lamps) -- Temperature range:40°C-80t^ -- Adjustable time and temperature setting -- The low and high temperature automatic switch is specially set due to the very quick heating speed of halogen lamp panel Super-low and wide chassis can be applied to the low-chassis automobile and widthwise pass through tire -- Fully automatic distance sensor -- Fully automatic overload protection

SF0403

SF0404

Specifications Model

SF0401

SF0402

SF0403

SF0404

Power supply

lph 230V

lph230V

lph 230V

Rated power

1000W

2000W

3000W

Height adjust

0.2-2.1m

0.2-2-lm

0.2-2. lm

Work current

4.15A

8.3A

13.6A

Output temperature

40-80°C

Time adjust

0.1-30min

0.1-99min

Working distance

0.5-0.7m

Packaging Size

70*70*23cm(0.113CBM) 152*4*4cm(0.002cbm)

158*70* 18cm(0.2CMB) 108*83*18cm(0.162CMB)

158*70* 18cm(0.2CMB) 108*78* 18cm(0.162CMB) 83*72* 18cm(0.108CBM)

Gross Weight

12kg 2kg

16kg 2kg

28+22+14= 64kg

AUTO SURFACE REPAIR EQUIPMENT SERIES

SF0401

-- Aluminum upright column reduces the weight of whole machine Philips or Vpower 21 inch short-wave infrared quartz halogen lamp -- Automatic devices, with electronic timer -- The angle of lamp panel can be adjusted in the lengthwise and lateral directions -- 1nput voltage: lph230V 5/1 OA 50/60Hz -- Power:1000W(l lamp) 2000W(2 lamps) -- Temperature range:40eC-80#C -- Adjustable time setting -- The low and high temperature automatic switch is specially set due to the very quick heating speed of halogen lamp panel -- Super-low and wide chassis can be applied to the lowchassis automobile and widthwise pass through tire

PAINT CURING LAMP

Features

AUTO SURFACE REPAIR EQUIPMENT SERIES

-- Aluminum upright column reduces the weight of whole machine Philips or Vpower 21 inch short-wave infrared quartz halogen lamp -- Automatic devices, with electronic timer -- The angle of lamp panel can be adjusted in the lengthwise and lateral directions -- Input voltage: 1 ph230V 5/1 OA 50/60Hz -- Power:2000W(2 lamps) 3000W(3 lamps) 6000W(6 lamps) -- Temperature range:40<C-801C -- Adjustable time setting -- The low and high temperature automatic switch is specially set due to the very quick heating speed of halogen lamp panel Super-low and wide chassis can be applied to the low-chassis automobile and widthwise pass through tire

Features -- Aluminum upright column reduces the weight of whole machine -- Philips or Vpower 21 inch short-wave infrared quartz halogen lamp -- Automatic devices, with electronic timer -- The angle of lamp panel can be adjusted in the lengthwise and lateral directions -- Power:2000W(2 lamps) 3000W(3 lamps) 6000W(6 lamps) -- Temperature range:40째C-80t^ -- Adjustable time and temperature setting -- The low and high temperature automatic switch is specially set due to the very quick heating speed of halogen lamp panel Super-low and wide chassis can be applied to the low-chassis automobile and widthwise pass through tire -- Fully automatic distance sensor -- Fully automatic overload protection

SF0405

SF0406

Specifications Model

SF0405

SF0406

Power supply

lph230V

lph 230V

Rated power

6000W

Height adjust

0.2-2. lm

0.2-2.1m

Work current

27.2A

Output temperature

40-80eC

40-80BC

Time adjust

0.1-30min

0.1-99min

Working distance

0.5-0.7m

Packaging Size

158*70* 18cm(0.2CMB) 108*83*36cm(0.324CMB)

158*70* 18cm(0.2CMB) 108*78* 18cm(0.162CMB) 83*72*18cm(0.108CBM) 83 *72* 18cm(0.108CBM)

Gross Weight

83kg

28+22+14+14=78kg

DUST-FREE GRINDING SYSTEM

SF0601

SF0604

SF0603

Description -- This industrial used vacuum collection dust equipment is specially for dauntlessness polish design, may coordinate the use air operated, the electrically operated grinding machine, the hand to dig and so on the necessary polish tool. -- The main engine sign matches lengthens 6 meters double sweep-up pipes, may with enter uses two sand mills also to work, convenient teaching and enhancement work and equipment use efficiency. -- The two-stage power electrical machinery ultra-static sound motor provides when a peaceful comfortable peaceful work not boundary work for you the biggest noise only then 80 decibels. -- The function consummation has the automatic/manual two kind of work pattern vacuum collection dust barrel to leave may take does the wet vacuum cleaner clean factory workshop. -- Tertiary filtration remarkable enhancement dust removal effect, safeguard working conditions promotion working efficiency -- Side example replacement filter (at the back of top head sponge filter frame) -- The sand mill rotary system connection distortion compensation, guaranteed the tool causes the dust leg not to be able to twine. -- The main engine disposition oil mist, the sand mill works when can automatically carry on the maintenance lubrication through the air feed. -- The stochastic present may clean the filter and the filter pocket .

Specifications Tank Capacity

Dimensions

(mm/H2O) (m3/min)

(L)

(mm)

240/230/220

2100

2.8

680x700x930

1250

240/230/220

2274

2.8

720x420x950

1250

240/230/220

2274

2.8

900 × 470 × 1500

SF0604 1200x2

240/230/220

2300

1100 × 470 × 1500

SF0605

240/230/220

2274

3.5

900 × 470 × 1500

Model

Power

Power Supply

Water MT

(W)

(V)

SF0601

1200

SF0602 SF0603

1500

Air flow

Configuration-1 Accessory Name

5"Orbital Sander

6"Orbital Sander

Square Sander

Y-type Hose fitting

Dust Hose

Item No

PW0500-63

PW0500-66

PW0500-69

SF0600-51

PW0500-51

Parameters

Dimensions:123 mm Air consumption:0.3 m³/min Free speed:10000 rpm Air pressure: 90 psi Deflection diameter:5 mm

Dimensions:148 mm Air consumption:0.3 m³/min Free speed:10000 rpm Air pressure: 90psi Deflection diameter:5 mm

Dimensions:78x176mm Air consumption:0.4 m³/min Free speed:10000 rpm Air pressure:90psi Deflection diameter:5 mm

Dual pipette accessories, polymer plastics manufacturing, anti-beat, mold manufacturing, good sealing

Length:38MMX5M+32MMX1M Easy to use for long distances, compressive strength, high temperature 80 low temperature 40 degrees is not damaged. Overall Length 6M

Unit SF0601 SF0602 SF0603 SF0604

set 1 1 1 1

set \ \ 1 1

set 1 1 1 1

pcs 1 1 1 1

pcs 1 2 2 2

Configuration-2 Accessory Name

Vacuum Hand Sanding

Hand Sanding

Multi-Use Sanding Pad

Disposable Bags

Dry Abrasive Paper

Item No

PW0500-62

SF0600-42

SF0600-41

SF0600-31

SF0600-32

SF0600-01

SF0600-11

SF0600-21

SF0600-22

Parameters

70×120mm 70×200mm

70×100mm 70×135mm 70×200mm

9pcs set, the manual sanding is suitable for different angles

6"15-holes

5"6-holes

Dimensions:6"6-hole Dimensions:95X180 Dimensions:5"6-hole P80\P120\P180\ P80\P120\P180\P240\ P80\P120\P180\P240\ P240\P320\ P320\P400\P600 P320\P400\P600 P400\P600

Unit

set

pcs

SF0601

SF0602

100

SF0603

100

SF0604

100

AUTO SURFACE REPAIR EQUIPMENT SERIES

SF0602

Consume The Material PW0500-63 5"Orbital Sander

PW0500-66

"Dimensions:148 mm Air consumption:0.3 m³/min Free speed:10000 rpm Air pressure: 90psi Deflection diameter:5 mm"

PW0500-69

"Dimensions:78x176mm Air consumption:0.4 m³/min Free speed:10000 rpm Air pressure:90psi Deflection diameter:5 mm"

6"Orbital Sander

Square Sander

SF0600-51 Y-type Hose fitting

PW0500-51

AUTO SURFACE REPAIR EQUIPMENT SERIES

"Dimensions:123 mm Air consumption:0.3 m³/min Free speed:10000 rpm Air pressure: 90 psi Deflection diameter:5 mm "

Dust Hose

PW0500-62 Vacuum Hand Sanding

SF0600-42 Hand Sanding

Dual pipette accessories, polymer plastics manufacturing, anti-beat, mold manufacturing, good sealing

"Length: 38MMX5M+32MMX1M Easy to use for long distances, compressive strength, high temperature 80 low temperature 40 degrees is not damaged. Overall Length 6M"

"70×120mm 70×200mm"

"70×100mm 70×135mm 70×200mm"

SF0600-41 Hand Sanding

9pcs set the manual sanding is suitable for different angles

SF0600-31 Multi-Use Sanding Pad

6"15-holes

SF0600-32 Multi-Use Sanding Pad

5"6-holes

SF0600-01 Disposable Bags

SF0600-11 Dry Abrasive Paper

SF0600-21 Dry Abrasive Paper

SF0600-22 Dry Abrasive Paper

"Dimensions:95X180 P80\P120\P180\P240\P320\P400\P600 "

"Dimensions"5""6-hole P80\P120\P180\P240\P320\P400\P600"

"Dimensions:6""6-hole P80\P120\P180\P240\P320\P400\P600"

SANDBLAST TANK 5GALLON SANDBLAST TANK Specification

-- Equipped with a nozzle and shut-off valve, pressure gauge, ceramic nozzle,2.5mm -- Hose, filling funnel, water-trap, 6"rubber wheels and can vas hood -- Tank Dimension: 1 0" Diameter, 1 5"Length -- Overall diameter: 83cm(H) x48cm(L)x29cm(W) -- Hose Length: 2.5m -- Work pressure: 60-1 25PSI & 6-25CFM -- Tank volume: 5Gals -- Air consumption: 6-25CFM

10GALLON SANDBLAST TANK Specification

-- Equipped with a nozzle and shut-off valve, pressure gauge, ceramic nozzle,2.5mm, hose, filling funnel, water trap, 6" rubber wheels and can vas hood. -- Tank Dimensions:12" Diameter, 20"Length -- Overall Dimension: 83cm (H)x48cm(L)x33cm(W) -- Hose Iength:2.5M -- Work pressure: 60-1 25PCI & 6-25CFM -- Tank volume: 10G

Function -- Pressurized design 30% more sandblasting power than siphon units. -- Provides more abrasive when you need truly efficient performance.

Function

-- Pressurized design 30% more sandblasting power than siphon unite. -- Provides more abrasive when you need truly efficient performance.

SF0702

20GALLON SANDBLAST TANK Specification -- Heavy-duty all steel construction; -- Tank volume:20Gallon -- Air Consumption: 6-25CFM -- Overall dimension: 92cm(H) x 78cm(L) x 38cm(W) -- Equipped with new sandblast gun and concerned necessary parts -- Hose length: 10feet -- Working pressure: 60-125PSI

Function

-- Sandblast parts before welding or painting -- Replaceable ceramic tips in nozzle prolonging service life; -- Use aluminum oxide or glass beads for cleaning;

SF0703

28GALLON ABRAISIVE BLASTER WITH VACUUM

Specification -- Use with most blast media including silica, shot, and shell -- Removable dust container -- 6" diameter rear wheels for easy transport -- Air consumption: 6-22.5CFM @ 11 5PSI -- Motor power: 1 200W -- Air inlet: 1/2"-18NPT -- Tank size: 41 '(H) x 15" (I.D)

Function -- Built-in vacuum eliminates the need for breathing apparatus. Recycles abrasives for reuse. -- Separates abrasive from debris -- Cuts cleanup time

SF0704

AUTO SURFACE REPAIR EQUIPMENT SERIES

SF0701

SANDBLAST TANK BENCH TOP SANDBLAST CABINET

220L CAPACITY VERTICAL SANDBLAST CABINET

Specification

Specification -- Heavy steel construction, double door on the sides -- Transparent glass viewing window -- 40-80PSI @ 1 5-25CFM -- Working space: 60x84x63cm -- Overall dimension: SF0706-l: 38cm (H)x87cm(L)x63cm(W) SF0706-ll:145cm (H)x87cm(L)x63cm(W) -- Electrical requirements of light: 11 5V/230V,the -- SF0706-I has two lights -- Maximum operation pressure: 125PSI

-- For use with glass beads, silica sand, alum oxide and more. -- Red finish steel cabinet have a transparent plastic top door, helps keep abrasive dry. -- Air compressor delivery of 4080 PS I @ 5CFM -- Overall dimension: 66cm(L) x53cm(W)x49cm(H) -- Working space: 56cm(L) x46cm(W)x28cm(H)

AUTO SURFACE REPAIR EQUIPMENT SERIES

Function

SF0705

SF0706

-- Cleaning parts quickly and easily. -- Through the sealed rubber glove parts, you control the high- efficiency air blast gun inside, directing 100 maximum PS I abrasive flow to clean parts FAST I

Function

SF0706-II -- Blast rust, corrosion and paint on large parts in a enclosed cabinet to keep dust off the floor and out of the air.

350L CAPACITY INDUSTRIAL SANDBLAST CABINET Specification ------------------

SF0707

Natural rubber/vinyl blast gloves Perforated steel flooring-abrasive Large particle-separating screen Clean-out door. Powder coated inside and outside Air regulator/ gauge panel. 14 gauge steel legs (16 gauge panels) Eliminating typical suction pick-up tubes and hoses, media metering Series blast cabinets in an entirely different class from the competition. External fluorescent lighting system, Packed in wooden case. Overall dimension: 1 03x90x164 cm Work area: 94.5x60.5x60.5cm Air pressure range: 60PSI-120PSI Sand capacity: approx 40lb Abrasive media: silica sand, glass beads, silicon carbide, emery, plastic sand, etc. Power requirement: 110V,60Hz or 230V,50Hz Output voltage: 12V

420L CAPACITY INDUSTRIAL SANDBLAST CABINET

Specification

-- Natural rubber/ vinyl blast gloves. -- Perforated steel flooring-abrasive large particle-separating screen and cleanout door. -- Powder coated inside and out. -- Extra-rugged, heavy-duty production foot valve assembly. Built to blast with heavy steel housing and high-production brass flow valve. -- Air regulator / gauge panel. -- 14 gauge steel legs (16 gauge panels) -- Eliminating typical suction pick-up tubes and hoses, media metering valve puts our economy -- Series blast cabinets in a entirely different class from the competition. -- External fluorescent lighting system. Packed in wooden case. -- Overall dimension: 130x63x1 70cm -- Work pressure range: 50-125PSI BEIJING SYLVAN AUTOMOTIVE EQUIPMENT CO.,LTD TEL: 86-10-56292661-10 86-10-56292661-16 ADD: Room 20C, Building A, Zhengdong International Plaza, Jia 2,Dongzhimen Waixiaojie, Dongcheng District, Beijing 100027, P. R. China WEB: WWW.SYLVAN.CO

SF0708

SANDBLAST TANK 10GALLON ROLL-ABOUT SANDBLASTER

20GALLON ROLL-ABOUT SANDBLASTER

Specification

-- 65-125PSI operation pressure comes with safety pressure release valve and 3/8in brass valve. -- Using granular abrasives under high pressure and includes 3/8in brass valves. -- Also comes with 8ft, heavy duty 3/8in. -- Hose with carbon steel shut-off valve and 4 inter changeable nozzles. -- Hood and instruction are in stock; -- Hose length: 1 Oft -- Tank dimension: 10" dia, 24-1/2"length

SF0709

Specification

-- Has safety pressure release valve,3/8in. Brass valves for air throttling and sand metering. -- Work pressure: 65 to 125PSI -- Baked enamel finish. -- Heavy duty 3/8in, 8-ft,hose has carbon steel shut off valve and 4 inter changeable nozzles. -- Hood and instruction are in stock; -- Hose length: 10ft -- Tank dimension: 12-1/2"dia, 27"length -- Pressure gauge indicator: 0-125PSI -- Required compressed air system (not included): 2HP compressor with 3/8" diameter air hose -- Recommended media type: glass bead, silicon carbide, alumina, walnut shell, brass bead -- Recommended use: use with 80, 100,120 grit media, at60PSI, with 3/32". Nozzle for best results (run time; 45minutes with 90lbs, media -- Water trap type: push button to drain -- Accessories: 3/32" nozzle,

SF0710

Specification -----------

Sand Grade Type: up to 60 grit Abrasive material; aluminum oxide, garnet powder, glass bead Drum capacity: (gallons) 3.7uk Sand capacity: 22.6/50 kg/lbs. Operating pressure: 1 00-1 50PSI Flow rate req: 10-1 6CFM Compressor size HP (minimum): 3 Gun inlet size: 3/8" hose adaptor fitted Air inlet hose diameter: 3/8" (10mm) Nozzle sizes: 4mm,5mm,6mm,7mm, (ceramic)

SF0711

AUTO SURFACE REPAIR EQUIPMENT SERIES

90LB SIPHON FEED SANDBLASTER

HAND HELD SANDBLASTER Hand held sandblaster with 4 extra function nozzle

Specification

AUTO SURFACE REPAIR EQUIPMENT SERIES

SF0801

-- ALL NEW ERGONOMIC LEGERITY FUNCTION -- Always wear eye protection and protective clothing equipment to avoid injuries. -- Please pay attention, that the operation pressure never exceed over 6,7 bar. -- Disconnect the tool from the air-supply before changing accessories or when nothing in use. -- Light weight plastic gun body. -- Tank 0.9L capacity. -- Operating pressure 90PSI. -- Air Inlet: 1/4" NPT female -- 4 Extra functional nozzles.

Hand held sandblaster with 2 inter ceramic nozzles

SF0802

Specification -- Always wear eye protection and protective clothing equipment to avoid injuries. -- Please Pay attention, that the operation pressure never exceed over 6,7 bar. -- Disconnect the tool from the air-supply before changing accessories or when nothing in use.

COLOR MATCHING SYSTEM/PAINT MIXING MACHINE

Heads

Heads for big cans

Heads for small cans

SF1601

367×196×395

SF1602

1006×209×1097

260

SF1603

1006×209×1022 260

SF1604

1006×209×1022 260

SF1605

1390X380X1807 255

SF1606

1390X380X1807 555

SF1607

1390X380X1807 705

SF1608

1780X380X1807 280

SF1609

1780X380X1807 900

SF1610

1960×380×1807

350

SF1611

1960×380×1807

750

SF1612

1960×380×1807

900

SF1613

1960×380×1807

900

SF1614

1960×380×2098 1000

SF1615

1960×380×2098 1000

SF1616

2090×380×1807 1125

SF1617

2090×380×1807 1260

SF1618

2090×380×2098 1365

SF1619

2342×380×2098 1000

SF1620

2342×380×2098 1400

SF1621

102

2342×380×2098 1400

Dimension (mm)

Power (w)

(L×W×H)

AUTO SURFACE REPAIR EQUIPMENT SERIES

Standard schemes

Features

-- Worldwide originally developed independent mixing units system of the mixing machine, super quiet. -- Heads of the mixing machine can be configured flexibly. -- Modularized design, rich product series. -- Stable and reliable performance, maintenance free. -- Working table and adaptor plate are optional. -- Apply to all paint brands.

LA100 SERIES MIXING LID BIG MIXING LID

SMALL MIXING LID

Features -------

Unique pouring spout realizes accurate demand for operation. Unique Can-Fixed way, convenient to paint amount. Imported sealing material makes better sealing effect. Apply to waterborne automotive paint. Perfect design, no paint leakage or air loss. Apply to all paint brands

Application Small Mixing Lid For 0.5-1 Liter cans

Big Mixing Lid For 2.5-4 Liter cans

COLOR MATCHING SYSTEM/PAINT MIXING MACHINE Model

BBA242 (Panda7)/BBA212

Weighting capacity

7100g/5000g

Accuracy

III OIML

Readability

Full Range: 0.1g Delta Range: 0.05g(0-999.95g), 0.1g (1000-7100g) g, oz, p (1part = 1/32 oz)

Display

LCD, Backlit, height: 12mm

Stabilization time

Approx. 1.0 second

Pan size

232 mm

Stand height

342 mm

Weighing pan height

78mm

Power supply

Via adapter 15V, 250mA

Net /Gross weight

3.8/4.5kg

Interface

RS232

Package sizes

380mmx250mmx280mm

Temperature range

5-35˚C

Relative humidity

20-80%

BBA212

AUTO SURFACE REPAIR EQUIPMENT SERIES

BBA242(Panda7)

Weighing units

PNEUMATIC PAINT DRYER GUN SF1801 The portable dry-blowing system is suitable for every spray booth and every work place. The blow guns can be exactly directed to the object. Once the air supply has been opened, the system is completely selfsufficient.

Features ----------------

Flexible positioning of the stand Infinite adjustment of the blow gun towards the object Doubled surface efficiency when using two dry-blowing spray guns Dry jet stand Blow guns can be adjusted on the stand in heights ranging from 30 to 190 cm, 12"to 75". The width of the stand is 82 cm(32") and can be extended to 170 cm(66") with the third gun extension Blow guns can be rotated by full 360째 Connection to standard compressed air hose Weight: 265g Adjustable Air Flow Working Pressure: 43PS1 Increases Air Flow by 10:1 Maximum Pressure: 6.8Bar (98PS1) Air Consumption: 200E/Min (7CFM) Maximum Pressure:174PS1 Air inlet: 1/4" -8NPS

AUTO SURFACE REPAIR EQUIPMENT SERIES