Replacement Wire System for Gym Equipment
Welcome The TalugymTM system has been specifically designed for the needs of the fitness industry. Using TaluritTM hydraulic mobile presses, it provides an easy and secure method of swaging end fittings onto gym equipment wires. Gym equipment wire ropes regardless of manufacturer can be easily repaired or replaced on-site. All our equipment, fittings and wire rope are manufactured to the highest standards and have been thoroughly tested. Other diameter wires and non-standard fittings can be quoted on request. TaluritTM, since 1948
Pricing All prices based on UK market in pounds sterling. Net prices shown subject to VAT.
Technical
• Always remove the nylon coating on the part of the rope that is being swaged. • Always use the correct die for the correct fitting. • Before each swage, always grease the die bores or the faces of the fitting being swaged. This increases the die wear life dramatically. • We recommend our specifically designed Talugrease. • Keep your press well maintained, remove excess material etc. after each swage. We recommend the press is periodically serviced by TaluritTM.
Abbreviations
OD = Overall Diameter
Press & Dies
Wire Diameter
Code
Description
AS = After Swage
SO5220TPHEAD
20T mobile hydraulic manual hand press.
3mm
SO54 A 035S
Presses 3.5 aluminium ferrule (S020035).
4mm
SO54 A 045S
Presses 4.5 aluminium ferrule (S020045).
5mm
SO54 A 060S
Presses 6 aluminium ferrule (S02006).
3mm
S054 A B/S3mm
Presses 3mm ball shank (TGYM070).
4mm
S054 A B/S4mm
Presses 4mm ball shank (TGYM071).
5mm
S054 A B/S5mm
Presses 5mm ball shank (TGYM072).
4 & 5mm
S054 A HEXGYM8
Presses solid eye terminals (TGYM055 & TGYM056),
Price each
threaded terminals (TGYM051, TGYM052, TGYM053 & TGYM054) and 4 hole terminals (TGYM041 & TGYM042). 4 & 5mm
S054 A HEX06SS
Presses steel end stop (TGYM061 & TGYM062).
Wire Diameter
Code
Description
3-6mm
TGYM075
Talugym shock ball, original size 35mm.
3-6mm
TGYM076
Talugym shock ball, large size 50mm.
upto 6mm
C 07
One handed Felco wire rope cutter C7.
upto 8mm
C 09
Two handed Felco wire rope cutter C9.
S21TALUGREASE
1L Special clear swaging grease for splicing applications
XNGSH09x90
Galvanised snap hook 9x90mm
Miscellaneous Price each
Galvanised Wire Rope, 7x19 Grade 1960,
Covered with Grade 11 Nylon
Wire Diameter
Code
Description
Nylon Colour
3mm
TGYM080
Covered to 4mm
Self Colour
4mm
TGYM081
Covered to 5.2mm
Self Colour
5mm
TGYM082
Covered to 6.5mm
Self Colour
3mm
TGYM084
Covered to 4mm
Black
4mm
TGYM085
Covered to 5.2mm
Black
Price per 100m
5mm TGYM086 Covered to 6.5mm Black We can quote for different diameters of wire, different thickness of Nylon, POA.
Aluminium Ferrule Wire Diameter
Code
Description
Pressing method
Die to use SO54 A 035S SO54 A 045S
3mm
S020035
T code 3.5
Cylindrical, OD 7mm
4mm
S020045
T code 4.5
Cylindrical, OD 9mm
Cylindrical, OD 12mm 5mm S02006 T code 6 One pressing operation until dies shut, clean excess flash off manually.
Price each
SO54 A 060S
Galvanised Din 6899 Thimble Wire Diameter
Code
Description
Price each
4mm
SO37689904
For use with 3 to 4mm covered wire.
5mm
SO37689905
For use with 4 to 5mm covered wire.
6mm
SO37689906
For use with 5 to 6.5mm covered wire.
Stainless Steel Ball Shanks AISI 316 Wire Diameter
Code
Description
Pressing method
Die to use
3mm
TGYM070
3mm ball shank.
OD AS-4.4 shank, 8.2mm ball
S054 A B/S3mm
4mm
TGYM071
4mm ball shank.
OD AS-6 shank, 10mm ball
S054 A B/S4mm
5mm
TGYM072
5mm ball shank.
OD AS-6.6 shank, 11.5mm ball
S054 A B/S5mm
Price each
Press, turn 90ยบ and press again until dies shut.
Zinc Plated Threaded Terminals, OD 10mm, Length 70mm Wire Diameter
Code
Description
Pressing method
Die to use
4mm
TGYM051
M10 Right hand thread.
TGYM052
M10 Right hand thread.
4mm
TGYM053
M10 Left hand thread.
Hexagon, press until dies shut. OD AS 8.8mm Across Flats
S054 A HEXTGYM8
5mm 5mm
TGYM054
M10 Left hand thread.
Price each
S054 A HEXTGYM8 S054 A HEXTGYM8 S054 A HEXTGYM8
We can manufacture for other wire sizes and supply different thread sizes, POA.
Zinc Plated Solid Eye Terminal (Ultimate Strength) Wire Diameter
Code
Description
Pressing method
Die to use
4mm
TGYM055
Heavy duty use.
TGYM056
Heavy duty use.
Hexagon, press until dies shut. OD AS 8.8mm Across Flats
S054 A HEXTGYM8
5mm
We can manufacture for other wire sizes, POA.
Price each
S054 A HEXTGYM8
Zinc Plated 4 Hole Terminal, OD 12.7mm, Length 66mm Wire Diameter
Code
Description
Pressing method
Die to use
4mm
TGYM041
Fits into weight stack.
S054 A HEXTGYM8
5mm
TGYM042
Fits into weight stack.
Hexagon, press until dies shut. OD AS 8.8mm Across Flats
We can manufacture for other wire sizes, POA.
Price each
S054 A HEXTGYM8
Zinc Plated Steel End Stop Wire Diameter
Code
Description
Pressing method
Die to use
4mm
TGYM061
Heavy duty end stop.
S054 A HEX06SS
5mm
TGYM062
Heavy duty end stop.
Hexagon, press until dies shut. OD AS 10.8mm Across Flats
We can manufacture for other wire sizes, POA.
S054 A HEX06SS
Price each
Tel: +44 (0)1226 369960 Fax: +44 (0)1226 361862 Email: sales@talurit.co.uk Website: www.talurit.com
Design & Produced by Wilson Design 2016 | www.wilsondesignhouse.com
Talurit (UK) Ltd Unit 4 Shortwood Court Shortwood Business Park Hoyland, Barnsley South Yorkshire S74 9LH, UK