How to operate the pool filtration system Source: http://www.poolking.co Remove the cartridge/filter cartridge filter cartridge and wash them clean. This step is only applicable if you have a cartridge or diatomite filter. Wash cartridges and/or filter with garden hose. The strongest Settings are set with a garden hose nozzle to expel the hard dirt filter. Replace the cartridge of the filter or cartridge of the filter housing, safely close and close the runoff valve on the filter housing. Carry out backwash filter without inner carbon cartridge or filter finger. Clean the fan itself. They need a back flush every once in a while. Check with the manufacturer's instructions on how to perform backwashing of your particular sand filter. Reinstall hoses in the same order that you chase them away. First will return hose and separator hose future. When you reconnect the hose from the separator pump, you will find that the water will start flowing into the pump basket.
The function of the pool filtration system is to keep the pool water clean so that we can swim with confidence when swimming. As for its operation method, above all gave you detailed introduction, I believe you see clearly? Before swimming, we must pay attention to whether the water is clean and hygienic before swimming safely and safely. After reading this blog, do you want to learn more about us? Please contact POOLKING,a swimming pool equipment manufacturer for further information.