WHAT ARE THE FEATURES AND FUNCTIONS OF AIR DUCT MACHINEďź&#x; source: http://www.gzcomifo.com The air duct machine mainly refers to the entire process of forming the entire pipeline. Generally speaking, only one machine is required to complete the process. Different products use different equipment. The air duct machine mainly includes inventory and materials; compression and leveling functions; and perforation, slot function; cutting function; transfer function; bite; shape bending function.it seems like an air duct auto line manufacture. It can be seen that in the air duct machine, a fully automated process can greatly reduce the use of labor. At the same time, the raw materials must be tightly pressed in each production cycle so that the materials can be adjusted to avoid production waste. The cutting function can cut off the supply of raw materials to facilitate the next step. It can make the whole process more efficient and faster. The air duct machine is a high-quality, high-efficiency, low-cost production line flexible duct machine, and the equipment has only a small area and is easy to move. It can adapt to high-efficiency production but also can adapt to mass production. The main use of electric double-disc feeding, feeding flat press, cutting corners, shears, clamping machine, double-link flange machine, bending machine, different parts of the production line like auto line duct machine with different functions.
Air duct machine features and functions: 1. Electric double shelf Mainly to complete the automatic feeding, material return and point movement of the feeding function, the sheet metal surface has a very good protection effect, as long as I in the above feed rack, in the use of the coil, the operation is very simple. 2. Sheet leveling The feeding roller plastic bag ensures that the sheet material is not slippery and will not cause damage to the appearance of the sheet material, because the material selection of the embossing roller plays an important role in the radian and angle of the plate. 3. Adjust the part The shear angle section is pressed flatly at the tail and can be freely adjusted according to the width of the metal plate. When the shear angle is different, it can be changed from the mold only. This is the hydraulic system of power. 4.The shear plate part Mainly used for cutting when changing materials. 5. Bite machine The main purpose is to ensure the size of the dishes. When the length of the predetermined length is reached, the mobile articulator will automatically cut off and return to a series of actions to achieve the occlusion function. 6. Double linkage automatic folding machine Double linkage consists of four rollers. When the plate enters the roller, the plate is formed. 7. The curved part When the flat plate goes to a predetermined length, the bent portion automatically completes the bending motion of the plate. If you want to learn more about us, please contact us, we will give the best service to you.