Sidewall_awning_instr_OVO28.qxd
7/16/08
3:48 PM
Page 1
E-Z UP INSTANT SHELTER ®
®
DURA-LON™ SIDEWALL INSTRUCTIONS Sidewall Accessories Meet CPAI-84 Fire Requirements
Toggle & Loop Straps
Awning Cut-outs Hook & Loop Strips
1 Back Wall
2 Sidewalls
1 Front Wall
Note: The long toggle & loop straps are for the roll-up feature on each wall. The short toggle & loop straps are for attaching the sidewall to the frame trusses.
towards the frame. Then follow Step
Step 1: SIDEWALLS
2 opposite.
Locate the 2 sidewalls and place them on opposing sides of the shelter; these sidewalls will serve as the sides of the shelter.
Reattach Awning Fabric when complete.
Step 5: ENCLOSING THE SHELTER
Step 2: ATTACHING SIDEWALLS
To fully or partially enclose your E-Z UP® shelter, zip the sidewalls together at each corner of the frame.
Attach each sidewall to the frame by wrapping the toggle and loop straps (use short loop first) around the frame trusses and the side hook & loop strips around the legs of the frame. Secure the strips by pressing them onto the opposite end of the hook & loop strip.
Step 6: SIDEWALL ROLL-UP FEATURE
To use the roll-up feature, unzip the sidewall at each corner. Have one person stand at each end of the sidewall and roll the sidewall up. Once the sidewall has been rolled to the top, secure it by using the long toggle & loop strap. Wrap the toggle & loop strap around the sidewall, over the frame truss, and then hook onto the toggle end.
Note: The top of the sidewall tucks in between the shelter frame and the shelter’s top.
Step 3: ATTACHING BACK WALL
Locate the back wall with the middlezipper which can be used as a back door. To attach, make sure that the two halves of the back wall are zipped together, then follow Step 2 above.
Step 7: RELEASING THE ROLLED-UP SIDEWALLS
To drop down the rolled-up sidewalls, release the toggle & loop straps and let the sidewall unroll and drop to the ground.
Step 4: ATTACHING FRONT WALL
If the awning fabric is attached, simply remove awning fabric first. Locate the Front Wall with the awning cut-outs located at the top corners. Lift the awning cut-out flap over the awning poles and slide the front wall
INTERNATIONAL E-Z UP, INC.
1601 Iowa Avenue, Riverside, California 92507 USA Voice (909) 426-0060 • Fax (909) 426-0063 www.ezupdirect.com
1 (800) SHADE ME 7 4 2 3 3
6 3
Important: When enclosing your shelter by zipping up all 4 sidewalls, it is strongly recommended the shelter be weighted down or secured using E-Z UP® Heavy Duty Stakes to avoid wind damage.
Covered under one or more of the following patents: 4,607,656; 4,924,896; 5,244,001; 5,421,356; 5,485,863; 5,490,533; 5,511,572; 5,632,292; 5,632,293; 5,794,546; 5,797,412; 5,813,425; 5,865,127; 5,921,260; 5,934,301; 6,041,800; 6,070,604; 6,076,312; 6,129,102; 6,138,702; 6,192,910; 6,230,729; 6,240,940; 6,361,057; 6,363,956; 6,374,842; 6,382,224; 6,397,872; 6,412,507; 6,431,193; 6,439,251; 6,470,902; 6,502,597; 6,520,196; 6,601,599; 95704390; 94/2354; 91461; 132167; 95/0693; 95/6140; 95/6141; 84107895; 684,978; 2123096; 190486; 289754; 215344; 701077; 2128935; 2949648; 48648; DE 695 10 919 T2; WO96/03561. International Design Registration No. DM/009515 Benelux Design Registration No. 16959-04. Other US and foreign patents pending. © Copyright 2008 International E-Z UP, Inc. USA. All rights reserved.
Sidewall_awning_instr_OVO28.qxd
7/16/08
3:48 PM
Page 2
E-Z UP INSTANT SHELTER ®
®
NAME BANNER & AWNING INSTRUCTIONS
Vinyl Pocket
Plastic Hooks
Hook & Loop Strips Awning Pole Sleeves
Awning Poles
Dura-Lon™ Name Banner
Dura-Lon™ Awning
HOW TO SET UP YOUR E-Z UP® NAME BANNER ACCESSORY
HOW TO SET UP YOUR E-Z UP® AWNING ACCESSORY
What’s provided:
What’s provided:
1 x Dura-Lon™ Name Banner
1 x Dura-Lon™ Awning 2 x Awning poles
ATTACHING NAME BANNER
ATTACHING AWNING POLES
Step 1:
The Name Banner is attached to your shelter top. Locate the four fabric loops that are sewn into the corners of the shelter top. Then locate the four plastic hooks on the Name Banner and insert them into the fabric loops. Be sure to orientate the Name Banner so that the vinyl pocket is facing outward.
Fabric Loop
Step 1:
Locate the awning pole holes in your E-Z UP® frame legs. Simply push each awning pole into the frame leg. Plastic Hook
ATTACH AWNING FABRIC Step 2: Slide awning fabric over the awning poles. Slide the fabric to the end of each awning pole.
Step 2:
*Simply slide your own signage into vinyl pocket. *Signage is not included. Recommended size: 68” x 7.75”.
WARNING: Keep all flame and heat sources away from the top, awning and sidewall fabrics. These fabrics meet the flammability requirements of CPAI-84. The fabric may burn if left in continuous contact with any flame source. The application of any foreign substance to the fabric may render the flame-resistant properties ineffective.
Step 3: Secure the awning by wrapping the hook & loop strips under the top and around the frame trusses and press together firmly.
Hook & Loop Strips
Note: When taking down your E-Z UP® shelter be sure to remove the Awning and Name Banner before closing the shelter. We recommend that all accessories be removed should heavy winds or rain threaten. ACCESS R00 OVO28