Grove-YB7725-Product-Guide by Felix Abad

Grove YB7725 Product Guide

Features • 22 t (25 USt) capacity • 21,6 m (71 ft) four-section full power boom • 13,6 t (15 USt) deck carrying capacity • Tilt steering wheel • Load sensing piston hydraulic pump • Proportional hydraulic controls

Features

Split door design

The â&#x20AC;&#x153;newâ&#x20AC;? split door design, offered with the optional enclosed cab, allows for the top half to be left open while keeping the bottom half closed for safety.

The reach and capacity to get the job done A 5,1 m (17 ft) swingaway extension added to the 21,6 m (71 ft) main boom provides an impressive 28,9 m (95 ft) tip height with a capacity of 2268 kg (5000 lb). A galvanized down-haul ball is included with the extension.

Hook block

A galvanized coated hook block is provided as standard to help eliminate rusting of this important crane component.

Operator cab

Hydraulic proportional joystick controls, automotive dash layout, tilt steering wheel, and suspension seat enhances operator comfort and ease of use.

Contents

Specifications

Dimensions

Range diagram

Load chart

DIN/ISO range diagram

DIN/ISO load chart

Symbols glossary

Specifications Superstructure

*Load Moment Indicator (LMI)

Boom 7,21 m – 21,6 m (23 ft 8 in - 71 ft) full power main boom. Four-section boom with three (3) powered sections. Maximum tip height: 24,0 m (79 ft). *Offsettable swingaway extension 5,1 m (17 ft) offsettable swingaway extension. Offsets 0°,15°, and 30° via pivoting boom nose. Stows alongside base boom section. Maximum tip height: 28,9 m (95 ft).

Swing Ball bearing swing circle with 360° continuous rotation. Hydraulic motor driven pinion with brake. Maximum speed: 2.5 rpm Hydraulic system

Boom nose Two nickel plated steel sheaves mounted on heavy duty tapered roller bearings with removable pin-type rope guards. Quick reeve type boom nose with four-position (0°, +30°, +60°, and + 80°) pivoting to minimize head height requirements. Lowers head height by 0,6 m (2 ft). Boom elevation Two double acting hydraulic cylinders with integral holding valves provides elevation from -0° to +80°.

One pressure compensated variable displacement axial piston pump with load sensing combined with two (2) gear pumps. Maximum output of: 238 LPM (79 GPM). Maximum operating pressure: 248 bars (3600 psi). Six section valve bank, chassis mounted, operated via dash mounted, pilot pressure hydraulic joysticks. 227 L (60 gal) hydraulic reservoir with sight level gauge and steel side plating to guard against side impacts. 10 micron return line filter with full flow by-pass protection and service indicator. Hoist specifications

Anti-two block device Standard anti-two block device, which, when activated, provides an audible warning to the operator and “locks-out” all functions whose movement can cause two-blocking.

Piston motor driven with automatic spring applied / hydraulically released wet brake. Maximum hoist pull (first layer): 6804 kg (15,000 lb) Maximum permissible single line pull: 5670 kg (12,500 lb) (3.5:1 design factor)

Load indicator (LSI) A simple effective and easy to use load indicating system used in conjunction with the anti-two block system to assist the operator in efficient operation of the unit within the limits of the load chart. The display panel displays the hook load and cuts-out the telescope and boom lift down function when a load limit is exceeded. The warning is by a flashing light on the display panel. In conjunction with the load display panel (receiver) there is a wireless transmitter and load sensing pin attached to the boom head that transmits the hook load to the display panel. (wireless system)

“Graphics Display” of boom angle, boom length, boom radius, capacity, and allows for operator input to set the limit parameters based on the load chart. Displays color coded light bar and audible alarm with function cut-out if load exceeds the load chart parameters. (hardwired system)

Maximum single line speed: 61 m/min (200 fpm) Rope construction: 6X19 XIPS/IWRC Rope diameter: 16 mm (5/8 in) Rope length: Main hoist: 119 m (390 ft) Maximum rope stowage: Main hoist: 151 m (495 ft)

*Denotes optional equipment

Specifications Carrier

Transmission Chassis

High strength alloy frame constructed with integral outrigger housings; front and rear lifting, tie-down, and towing lugs. 60 ft² carrydeck size with 13 608 kg (30,000 lb) deck only carrying capacity. Deck coated with anti-skid treatment. Outriggers Two-stage hydraulic telescoping beam with vertical jack at the four corners provides extended and down and retracted and down lifting capacities. Integral holding valves on both beam and jack cylinders. Outrigger pad size: 29,2 cm x 29,2 cm (11.5 in x 11.5 in) Maximum outrigger pad load: 20 321 kg (44,800 lb) / 339 p.s.i. Outrigger controls Independent outrigger control rocker switches for beam or jack selection with separate extend/retract rocker switch. 360° bubble level located inside cab. Engine (Tier IV) Cummins QSB 4.5 L, four cylinders, turbo-charged diesel rated at 974 kW (130 hp) at 2500 rpm. Standard 110V engine block heater and cold weather intake grid heater. Diesel Oxidation/Catalyst, stainless steel, muffler to meet 2012 EPA emissions, combined with a Cummins direct air flow, 2 stage cyclonic air filter system. Maximum torque: 620 N-m (457 ft lb) at 1500 rpm. Note: Tier IV engine Required in North American and European Union countries. Engine (Tier III) Cummins QSB 4.5L, four cylinders / turbo-charged diesel rated at 974 kW (130 bhp) (Gross) at 2500 rpm. Standard 110V engine block heater and cold weather “ether” assist system. Engine hour meter located inside operators compartment. Maximum torque: 370 N-m (273 ft lb) at 2500 rpm. Note: Required for sale outside of North American and European Union countries

Powershift with four speeds forward and reverse. Stalk mounted direction shifter with rotary gear selection. Operators control station Frame mounted, open air style control station with cab shell includes all crane functions, driving controls, and overhead safety glass. Other standard equipment includes a suspension seat with seat belt, hourmeter, sight level bubble, and 2.5 lb (1.1 kg) fire extinguisher. The dash panel includes a multi-cluster gauge showing fuel, water temperature, oil pressure, and battery voltage. An engine monitoring indicator strip shows engine warning, stop engine, transmission low pressure, transmission high temperature, and low brake system pressure. The load indicator receiver is mounted to the top of the dash panel. *Operators control station enclosed Includes the standard cab shell with the addition of front, rear, and right side glass, a split (2 piece) hinged door with sliding glass, front windshield wiper and washer, hot water heater and defroster with fan and cab dome light are included. Electrical system Two 12V maintenance-free batteries, 820CCA at 0°. 63 amp alternator. Drive 2 wheel (rear drive) or 4 wheel selection, front and rear axle drive with planetary hubs and limited slip differential. Steer Standard three steering modes. Front two wheel, four-wheel coordinated, and four-wheel crab steer with electronic self alignment, three-position rocker selector on dash panel. Outside turning radius: Two-wheel steer: 7,32 m (24 ft) Four-wheel steer: 4,04 m (13 ft 3 in)

Fuel tank capacity 189 L (50 gal) Grove YB7725

*Denotes optional equipment

Specifications Carrier continued

Gross vehicle weight (G.V.W.)

Suspension/axles Front: Drive/steer with differential and planetary reduction hubs, axle is rigid mounted to frame. Rear: Drive/steer with differential and planetary reduction hubs, axle is pivot mounted to frame allows up to 3.5° of oscillation. Oscillation lockouts Manual switch to engage and disengage the rear axle lockouts. Engage when lifting on rubber and in crab steer mode, Disengage to allow oscillation when traveling over rough terrain. Brakes Hydraulic actuated internal wet-disc service brake acting on all four wheels. Dash mounted toggle switch with light for activating or release of the dry disc parking brake mounted on the transmission output yoke. Tires Standard: 17.5 x 25 Bias Optional: 17.5R25 radials

Open cab: 20 249 kg (44,640 lb) Enclosed cab: 20 354 kg (44,873 lb) Miscellaneous standard equipment 22 t (25 USt) Two sheave “galvanize coated” hook block, with “Quick Reeve”. Back-up motion alarm Outrigger motion alarm Dual rear-view mirrors *Optional equipment AUXILIARY LIGHTING: includes cab mounted amber flashing light, dual base boom mounted floodlights CONVENIENCE PACKAGE: includes front and rear pintle hitch and headlight/taillight grille covers ENCLOSED CAB PACKAGE: includes heater and defroster, cab dome light, all window glass, and two piece split door 5,2 m (17 ft) fixed extension Air conditioner Catalytic convertor Hoist drum rotation indicator Wire rope 3rd wrap indicator with hoist function cut-out 3629 kg (8000 lb) below deck mounted tow winch Foam – filled tires

Lights Full lighting including turn indicators, head, tail, brake and hazard warning lights recessed mounted. Maximum speed 31,3 km/h (19.5 mph) Gradeability (theoretical) 63%...... (at engine stall) NO LOAD 38%......(at engine stall) with 13 608 kg (30,000 lb) DECK LOAD

*Denotes optional equipment

Dimensions 0° Boom Head

8793 mm (28' 10")

2079 mm (81.85")

6139 mm (20' 2") 7206 mm (23' 1")

2400 mm (7' 10")

30° Boom Head

1997 mm (78.62")

60° Boom Head 3485 mm (11' 5")

1773 mm (69.80")

80° Boom Head 1574 mm (61.97") 25° 467 mm (1' 6")

1677 mm (5' 6")

Ground Plane 1369 mm (4' 6") 2738 mm (9' 0")

1369 mm (4' 6") 2502 mm (8' 3")

4704 mm (15' 5") 5004 mm (16' 5") 5309 mm (17' 5")

803 mm (2' 11") 3036 mm 2285 mm (7' 6") 1499 mm (4' 11")

1677 mm (5' 6")

Ground Plane 1930 mm (6' 4") 2362 mm (7' 9") 2457 mm (8' 1")

804 mm (2' 8")

2356 mm (7' 9")

2316 mm (7' 7")

1553 mm (5' 1") C Rotation

454 mm (1' 6")

1989 mm (6' 6") 2362 mm (7' 9") 2457 mm (8' 1") 4902 mm (16' 1")

Grove YB7725

Dimensions

Dimensions Tire size 2-wheel steer

9326.9 [367.2]

14203.7 [559.2]

4-wheel 9936.5 steer [391.2]

17.5 x 25

C 9083 17.5 x 25 [357.6]

19 568 mm

16 093.4 mm

15 240 mm

14 600 mm

9326.9 mm

(770.4 in) (633.6 in) D E 14203.7 mm 9936.5 mm 8168.6 3779.52 (559.2 in) (391.2 in) [321.6] [149]

(600 in)

(574.8 in)

(367.2 in)

9083 mm

8168.6 mm

3779.52 mm

(357.6 in)

(321.6 in)

(149 in)

Four Wheel Steer

2400 mm (7' 10")

A Boom Clearance

B Carrier Clearance C Curb Clearance

D Outside Turn Radius

E Inside Turn Radius

Weights

GVW

Rear

(lb)

20 249

(44,640)

9 904

(21,834)

10 345

(22,806)

208

(458)

406

(896)

-199

(-438)

Crane weight

20 456

(45,098)

10 310

(22,730)

10 146

(22,368)

Basic machine: Including 21,6 m (71 ft) main boom, main hoist with 119 m (390 ft) of wire rope, 22,6 t (25 USt) hookblock, full counterweight, Tier IV engine

20 249

(44,640)

9 904

(21,834)

10 345

(22,806)

106

(233)

104

(104)

129

(129)

20 354

(44,873)

9 951

(21,938)

10 403

(22,935)

Basic machine: Including 21,6 m (71 ft) main boom, main hoist with 119 m (390 ft) of wire rope, 22,6 t (25 USt) hookblock, full counterweight, Tier IV engine Add: 5,1 m (17 ft) fixed swingaway extension and extension carrier brackets and downhaul weight

Add: Enclosed cab with heater and defroster Crane weight

Front

Range diagram 8

84 96

H 17' JI

88' WIT

71' BO

72 68

59' BO

60 56

56 52

47' BO

80°

70°

75°

35' BO

44 65°

36 32

35° 30°

OOM

20 16

28 24

25° 20°

23.0' B

60° 55° 50° 45° 40°

15°

10°

5° 0°

4 0

Height from the ground in feet

4 8

Operating radius in feet from axis of rotation

Grove YB7725

THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.

Load chart

MAIN BOOM LOAD RATINGS ON OUTRIGGERS MAIN BOOM LOAD RATINGS ON OUTRIGGERS MAIN BOOM ed and Down 360° or Retracted and Down Front/Rear Retracted and Down 360° ON RUBBER MAIN BOOM LOAD RATINGS ON OUTRIGGERS MAIN BOOM LOAD RATINGS ON OUTRIGGERS 35.0 ft Boom 47.0 ft Boom 59.0and ft Boom ft or Boom 23.0Down ft Boom 35.0 ft Boom 47.0 ft Boom 59.0 ft Boom 71.0 ft Boom and Down Any Boom Length Extended Down71.0 360° Retracted and Front/Rear Retracted 360° ft Boom ft Boom ft Boom 59.0 ft Boom 71.0 ft Boom 23.0 ftBoom BoomRated 35.0 ft BoomRated 47.0 ft Boom 59.0 Rated Boom 35.0 Rated Boom 47.0 Rated Rated Boom Rated Boom ted Boom Rated Boom23.0 Boom Rated Boom 360° 71.0 ft Boom Frontft Boom

MAIN ON R

ad b)

000 793 893 56 699 86 044 – – – – – – – – – – – – – – – – – – – – – – – –

Radius Angle Load Angle Load Angle Load Angle Load Angle Load Rated Boom Rated Boom Rated Boom Rated (ft) Boom (lb) Radius (deg) (deg) (lb) (deg) (lb) (deg) (lb) (lb) (deg) Angle Load Angle Load Angle Load Angle Load 63.5 26,350 73.2 34,300 78.1 33,600 8.5 (deg) (lb) 70.6 34,500 (ft) 59 20,800 76.2 (deg) 33,017 (lb) 79.7 (deg) 27,800 (lb) 27,800 (lb)10 (deg) 50,000 33,600 66.9 52.5 16,000 31,426 8.5 73.6 64.2 29,285 77.8 73.2 25,90034,300 78.1 12 45.5 27,800 63.2 28,464 1071 59.8 12,300 26,35738,793 75.8 70.6 24,10034,500 78.7 76.2 18,200 33,017 14 79.7 73.6 25,900 59.2 26,076 12 37 9850 68.3 53.6 24,01634,893 73.7 66.9 22,40031,426 77.1 16,750 29,285 16 77.8 71 26,357 55.1 23,496 14 26 24,100 8070 65.6 46.8 22,09631,256 71.7 63.2 20,79228,464 75.4 15,500 18 75.8 26,699 22,400 51.9 0 7090 21,379 16 63.5 38.8 20,902 70.1 59.2 19,582 26,076 74.2 68.3 14,650 24,016 19.5 73.7 46 18,471 18 59.9 28.7 – 18,62923,186 67.4 55.1 17,872 23,496 72 13,400 22,096 22 71.7– 65.6 20,792 40.8 16,592 19.5 – – 56.9 0 16,747 21,044 65 51.9 16,300 21,379 70.3 63.5 12,500 20,902 24 70.1 19,582 36 – – 14,600 2254 14,850 – 63 14,200 18,471 68.5 59.9 11,750 18,629 26 67.4 – 46 17,872 29 12,750 2451 13,050 –60.5 40.8 – 13,150 16,592 66.7 56.9 11,050 16,747 28 – 65– 16,300 20 11,250 26 47.5 – 11,600 –58.5 36 11,700 14,600 65.2 9800 30 – 54 14,850 63– 14,200 0 10,300 2845 – – 10,650 –56.5 29 10,750 12,750 63.9 9400 31.5 60.5 – 51 13,050 13,150 – – – – 9480 11,250 61.5 47.5 8850 11,600 34 58.5 3040 –9350 –53.5 20 11,700 – – – 36 – 8590 10,300 59.6 8400 36 56.5 31.5 –8460 – 51 0 45 10,650 10,750 – – – – 7940 3431 –7680 –48.5 –7830 –57 40 935038 53.5 9480 – – – – 25 7000 45.5 7150 55 7270 40 36 – – – – 36 8460 51 8590 – – – – 17.5 6550 6680 38 –6400 –42.5 – –53 31 768042 48.5 7830 – – – 6000 51.5 6270 43.5 45.5 400 –6000 –40.5 – – 25 7000 7150– – – – – – 36 5440 48.5 5680 46 42 – – – – 17.5 6400 42.5 6550– – – – – – – 32.5 5040 46.5 5250 48 43.5 –– – 28 – –44 0 6000 6000 – – – – – 4680 4860 50 40.5 46– –– – 23 – – – – 52 36– 5440 – – – 4350 41.5 4510 48– –– – 16 – – – – 54 32.5 5040 – – – – 4040 38.5 4190 50 – – – – – – 28 4680 – – – – – – 0 3820 36.5 3960 55.5 52– –– – – –– – – – 58 23– 4350– – – 32.5 3620 54 – – – – – – 16 4040 – – – – – – – – 29 3370 60 55.5 –– – – –– –25 – – 62 0– 3820– – – – 3130 58– –– – – –– –20 – – 64 –– – – – – 2920 60– –– – – –– –13 – – 66 –– – – – – 2720 62– –– – – –– –0 – – 67 – – – – 2620 64 – – – – – – – – 66 – – – – – – – – 67 – – – – – – – –

0 ft Boom

om Rated gle Load eg) (lb)

MAIN BOOM ON RUBBER Any Boom Length 360° Front Radius Rating Rating (ft) (lb) (lb) 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 42 44 46 48 50 52 54 56 58 60 62 64 66 67

27,800

9 7 .5 4 2 0 8.5 6.5 5 .5 1 9 7 5 3 .5 8.5 6.5 4 .5 .5 .5 .5

10,500 8870 7590 6810 5720 5000 4400 3880 3420 3120 2640 2310 2010 1750 1510 1350 1110 930 780 630 500 410 270 – – – – –

30,000 24,950 21,000 18,000 15,650 13,300 10,900 9460 8060 6960 6050 5300 4670 4130 3670 3260 2900 2590 2300 2280 2050 1840 1650 1480 1320 1220 1080 950 840 730 620 570

21,000 17,900 15,000 13,000 10,000 7920 6410 5780 4880 4140 3520 2990 2540 2160 1820 1530 1270 1040 830 720 610 500 390 280 – – – – – – – –

Angle Boom (deg) Angle 73 (deg) 70.5 67 63 59.5 78.7 55.5 77.1 52 46.5 75.4 41.5 74.2 36 72 29 70.3 20 68.5 0 66.7 – 65.2 – 63.9 – 61.5 – 59.6 – 57 – 55 – 53 – 51.5 – 48.5 – 46.5 – 44 – 41.5 – 38.5 – 36.5 – 32.5 – 29 – 25 20 13 0

Load Angle Load Angle Load Angle Load Rating Rating Rated Rated Rated Boom Boom Rated Boom Rated Boom Rated Boom Radius (ft) (lb) (deg) (lb) (deg) (lb) (deg) (lb) (lb) Angle Load (lb) Load Radius Angle Load Load Angle Load Angle Load Angle 24,000 78 21,900 21,000(deg) 6 30,000 (ft) 17,900 (lb) (lb) 16,650 (deg) (lb) 27,800 (deg) (lb) (deg) (lb) (lb) (deg) 79.5 19,300 76 17,900 8 24,950

15,100 27,800 12,250 10,150 18,200 8370 16,750 7300 5900 15,500 5040 14,650 4330 13,400 3740 12,500 3250 11,750 2910 11,050 – 9800 – 9400 – 8850 – 8400 – 7940 – 7270 – 6680 – 6270 – 5680 – 5250 – 4860 – 4510 – 4190 – 3960 – 3620 – 3370 – 3130 – 2920 2720 2620

63.5 8.5 14,200 73.5 59 7110 11,600 52.5 12 68.5 9710 45.5 14 65.5 8230 37 16 63.5 7330 6018 6050 26 57 0 19.5 5170 5422 4450 – 5124 3850 – 47.5 3340 – 26 4528 3010 – 40 – 30 2530 36 – 31.5 2200 3134 1910 – 2536 1660 – 17.5 1410 – 38 040 1230 – –42 –– – – 43.5 – –– –46 –– 48 – –– –50 –– –52 –– 54 – –– 55.5 – –– –58 –– –60 –– –62 –– – 64 – 66 67

26,350 73 77.5 13,350 20,800 70.5 75.5 11,000 16,000 67 73.5 9280 12,300 63 71.5 7910 9850 59.5 70 7060 67.5 8070 5900 55.5 65 5150 7090 52 63– 4520 46.5 60.5 3930 – 41.5 58.5 3410 – 36 56.5 3080 – 29 53.5 2590 – 20 51– 2260 0 48.5– 1960 – 45.5– 1700 – 42.5– 1470 – 40.5– 1310– 36 – 1070 – 32.5 890 28 – 720– 23 – 570– 16 – 430– 0 – 330– –– –– – – –– –– –– –– –– –– –– –– –– – – – –

24,000 78 19,300 76 79 10,500 15,100 73.5 77 8870 12,250 7590 71 75.5 10,150 68.5 74 6810 72 8370 5720 65.5 70 7300 5000 63.5 68.5 5900 4400 60 66.5 5040 3880 57 65 4330 3420 54 63.5 3740 3120 51 61 3250 2640 47.5 59 2910 2310 45 57– 2010 40 55– 1750 36 53– 1510 31 51.5 1350 – 25 48.5 1110 – 17.5 46.5 930 – 44 7800 – 41.5 630– – 38.5 500– – 36.5 410– – 32.5 270– – – –– –– –– –– –– –– –– –– –– – – – – – –

NOTES: JIB CAPACITY IS LIMITED BY BOTH STRUCTURAL CAPACITY CHART AND MAIN CAPACITY CHART.

21,900 10 17,900 12 14,200 14 11,600 16 9710 18 8230 20 7330 22 6050 24 5170 26 4450 28 3850 30 3340 32 3010 34 2530 36 2200 38 1910 40 1660 42 1410 44 1230 46 – 48 – 50 – 52 – 54 – 56 – 58 – 60 – 62 – 64 – 66 – 67 –

15,000 21,000 79.5 16,650 13,000 18,000 77.5 13,350 10,000 15,650 75.5 11,000 7920 79 13,300 73.5 9280 6410 77 10,900 71.5 5780 75.5 9460 7910 70 7060 4880 74 8060 67.5 4140 72 6960 5900 65 5150 3520 70 6050 63 4520 2990 68.5 5300 60.5 2540 66.5 4670 3930 58.5 2160 65 4130 3410 56.5 1820 63.5 3670 3080 53.5 2590 1530 61 3260 51 2260 1270 59 2900 48.5 1040 57 2590 1960 45.5 830 55 2300 1700 42.5 2280 1470720 53 40.5 1310 610 51.5 2050 36 1070 500 48.5 1840 32.5 890390 46.5 1650 28 720280 44 1480 23 570 – 41.5 1320 16 430 – 38.5 1220 0 330 – 36.5 1080 – – – 32.5 950 – – – – 840 – – – – 730 – – – – 620 – – – – 570 – – –

RATING REDUCTIONS FOR LOAD HANDLING DEVICES INSTALLED (lb) FROM MAIN BOOM

SHADED AREAS ARE GOVERNED BY STRUCTURAL STRENGTH, DO NOT RELY ON TIPPING.

10,500 8870 7590 6810 5720 5000 4400 3880 3420 3120 2640 2310 2010 1750 1510 1350 1110 930 780 630 500 410 270 – – – – –

FROM JIB

MAIN BLOCK

475

N/A

HOOK & BALL

100

JIB STOWED

N/A

JIB DEPLOYED

500

OPERATION OF THIS EQUIPMENT IN EXCESS OF RATING CHARTS AND DISREGARD OF INSTRUCTIONS IS DANGEROUS AND VOIDS WARRANTY.

27,800

MAXIMUM PERMISSIBLE SINGLE LINE PULL = 12,500 lb

6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 42 44 46 48 50 52 54 56 58 60 62 64 66 67

30,000 24,950 21,000 18,000 15,650 13,300 10,900 9460 8060 6960 6050 5300 4670 4130 3670 3260 2900 2590 2300 2280 2050 1840 1650 1480 1320 1220 1080 950 840 730 620 570

RATING REDUCTIONS FOR HANDLING DEVICES INSTA FROM MAIN BOOM MAIN BLOCK

475

HOOK & BALL

100

JIB STOWED

JIB DEPLOYED

500

HOIST ROPE: 5/8 in diameter MAXIMUM PERMISSIBLE SING 6 x 19 XIPS IWRC BRIGHT = 12,500 lb Min. req'd breaking strength = 45,400 lb SIDE 15° 30°

15°

FRONT

HOIST ROPE: 5/8 in d 6 x 19 XIPS IWRC BR Min. req'd breaking streng 30°

REAR

SIDE

15°

SIDE

30°

FRONT

5) The weights of all load handling devices such as hooks, hook blocks, slings, etc., except the hoist rope, shall be considered part of the load. See reduction chart. 6) Ratings on outriggers are for either outriggers fully extended and down or fully retracted and down. Ratings for outriggers fully retracted and down will apply for any intermediate outrigger setting. 7) Ratings on rubber depend on tire capacity, condition of tires and proper inflation pressure (110 psi). When replacing tires, contact Manitowoc for proper specifications. Loads on rubber may be transported at a maximum seed of 2.5 mph on a smooth, hard, level surface with boom retracted to the shortest length possible and centered over front. For 360° ratings on rubber, rear axle oscillation locks must be in place. Do not use jib with crane on rubber.

4) The rated loads shown on outriggers do not exceed 85% of actual tipping. The rated loads shown on rubber do not exceed 75% of actual tipping. RATING REDUCTIONS FOR LOAD 8) The maximum combined total boom and deck These ratings are based on freely suspended loads HANDLING DEVICES INSTALLED (lb) load is 20,000 lb. The maximum deck load only is FROM FROM with the crane leveled, standing on a firm, uniform MAIN BOOM JIB 30,000 lb. supporting surface. Practical working loads depend 475 MAIN BLOCK N/A on supporting surface, operating radius and other 9) Do not induce any external side loads to boom factors affecting stability. Hazardous surroundings, 100 100 HOOK & BALL or jib. JIB STOWED 0 N/A climatic conditions, experience of personnel and 80022135YB proper training must all be taken into account by JIB DEPLOYED 500 0 the operator. MAXIMUM PERMISSIBLE SINGLE LINE PULL THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. = 12,500 lb The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.

HOIST ROPE: 5/8 in diameter 6 x 19 XIPS IWRC BRIGHT Min. req'd breaking strength = 45,400 lb

Any Bo Front Radius Rating (ft) (lb)

SIDE

s Angle 63.5 (deg) 59 52.5 45.5 37 26 0 – – – – – – – – – – – – – – – – – – – – – – –

(lb) Angle Load (lb) (lb) Angle Load Load 26,350 (deg) 73 24,000 (deg) 78 21,900 76 17,900 20,800 70.5 19,300 16,000 67 15,100 73.5 14,200 63 12,250 71 11,600 12,300 68.5 9710 9850 59.5 10,150 8230 8070 55.5 8370 65.5 7090 52 7300 63.5 7330 5900 60 6050 – 46.5 5170 – 41.5 5040 57 – 36 4330 54 4450 3740 51 3850 – 29 3340 – 20 3250 47.5 – 0 2910 45 3010 – 40 2530 – – 2200 – – – 36 – – – 31 1910 – 25 1660 – – 1410 – – – 17.5 – – – 0 1230 – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – –

Angle (deg) 79.5 77.5 75.5 73.5 71.5 70 67.5 65 63 60.5 58.5 56.5 53.5 51 48.5 45.5 42.5 40.5 36 32.5 28 23 16 0 – – – – – –

(lb) Load

(lb) Angle Load (deg) 27,800

Radius Rating Rating (ft) 6 21,000 30,000 (lb) (lb) 16,650 8 17,900 24,950 13,350 10 15,000 21,000 11,000 79 10,500 12 13,000 18,000 8870 9280 77 14 10,000 15,650 7910 75.5 7590 16 7920 13,300 7060 74 6810 18 6410 10,900 5720 5900 72 20 5780 9460 5150 70 5000 22 4880 8060 4520 68.5 4400 24 4140 6960 3880 3930 66.5 26 3520 6050 3410 65 3420 28 CAPACITY 2990 5300 3080 63.5 312017 ft JIB ON 30 2540 4670 2640 2590 61 EXTENDED OUTRIGGERS 32 2160 (lb) 4130 2260 59 2310 34 1820 3670 1960 57 2010 Jib Offset 36 1530 3260 Angle Main 55 1750 1700 38 1270 2900 0° 15° 1470 53 1510 Boom 40 1040 2590 1310 51.5 1350 To 55 ft To 55 ft To 71 ft To Angle 42 830 71 ft 2300 48.5 1110 1070 Main Main Main 44 720 2280 890 930 (deg) 46.5Main 46 610 2050 Boom Boom Boom 720 44Boom 780 48 500 1840 630 570 – 500 80 41.5 –50 5000 5000 390 1650 430 38.5 280 1480 75 36.57500 –52 4400 4400 330 410 54 – 1320 32.56100 270 –70 –56 3900 –3900 1220 – – – 58 –3500 1080 –65 – 5000– 4600 3500 60 – 950 – – – 60 3800 3150 62 –3150 840 – – 4300– 64 –2850 730 –55 – 3800– 3300 2850 66 – 620 3400 50 2900 2600 67 –2600 570

Load chart

30° Any Boom Length

3050 2600 2400 2400 2800 2400 2250 2250 RATING REDUCTIONS FOR LOAD 2600 HANDLING 2150DEVICES INSTALLED 2150 (lb) 2050 FROM FROM 2400 1930 MAIN 2080 1850 BOOM JIB 2300 1750 2050 1720 475 MAIN BLOCK N/A 100 100 HOOK & BALL 1600 2200 2000 1590 JIB STOWED 0 N/A 2100 1500 1950 1520 JIB DEPLOYED 500 0 2050 1460 – – MAXIMUM PERMISSIBLE SINGLE LINE PULL 2020 1450 – – = 12,500 lb 2000 1440 – –

45 40 35 30 25 20 15 10 5 0

HOIST ROPE: 5/8 in diameter 6 x 19 XIPS IWRC BRIGHT Min. req'd breaking strength = 45,400 lb

3500 3100 2800 2550 2350 2200 2100 2000 1950 1900 1830 – – – – – –

SIDE 15° 30°

15°

FRONT

REAR

30°

SIDE

1) The rated loads are the maximum lift capacities as determined by operating radius, boom length and boom angle. The operating radius is the horizontal distance from a projection of the axis of rotation to the supporting surface, before loading, to the center of vertical hoist line or tackle with load applied. 2) Rated load columns for discrete boom lengths apply when actual boom length is within +/- 1.0 ft of discrete length. When boom length or radius or both are between points listed on capacity chart, the smallest load shown at either the next larger radius or boom length shall be used. 3) For operating radius not shown, use load rating of next larger radius. 4) The rated loads shown on outriggers do not exceed 85% of actual tipping. The rated loads shown on rubber do not exceed 75% of actual tipping. These ratings are based on freely suspended loads with the crane leveled, standing on a firm, uniform supporting surface. Practical working loads depend on supporting surface, operating radius and other factors affecting stability. Hazardous surroundings, climatic conditions, experience of personnel and proper training must all be taken into account by the operator.

Grove YB7725

80022135YB

DIN/ISO range diagram 1,2

1,2

2,4

3,4

4,9 6,1

7,3

JIB

29,3 28,1 26,6

21,5 m W

26,6 25,6

25,6 24,4

BOOM

24,4 23,2

23,2 22,0

21,5 m

22,0

20,7

BOOM

20,7 19,5

19,5 18,3

18,0 m

18,3

17,1

BOOM

17,1 15,9

14,3 m

14,6

BOOM

13,4 12,2

15,9 14,6

80°

75°

70°

13,4 65°

10,7 m

11,0 9,8

60° 55°

12,2

9,8

35° 30°

BOOM

8,5 7,3

25° 20°

7,0m

7,3

11,0

50° 45° 40°

8,5

4,9

18,3 19,5 20,7 22,0 23,2 24,4 25,6

ITH 5,2 m

28,1

6,1

8,5 9,8 11,0 12,2 13,4 14,6 15,9 17,1

6,1

15°

4,9

10°

3,7

5° 0°

2,4

2,4 1,2

1,2 G7

2,4

1,2

2,4

3,4

4,9 6,1

7,3

8,5 9,8 11,0 12,2 13,4 14,6 15,9 17,1

18,3 19,5 20,7 22,0 23,2 24,4 25,6

Operating radius in meters from axis of rotation

Height from the ground in meters

2,4 29,3

DIN/ISO load chart

MAIN BOOM LOAD RATINGS ON OUTRIGGERS Retracted and Down 360˚

M LOAD RATINGS ON OUTRIGGERS 14,3 m Boom 18,0 m Boom 21,5 m Boom n 360˚ or Retracted and Down Front/Rear

om ted kg) oad

550 650 250 900 825 650 695 905 785 905 215 640 255 – – – – – – – – – – – – – – – – – –

MAIN BOOM 7,0 m Boom 10,7 m Boom 14,3 m Boom 18,0 m Boom 21,5 m Boom Any Length ONBoom RUBBER Boom Rated Boom Rated Boom Rated Boom Rated Boom Rated Boom Rated Boom Rated Boom Rated Front 360° Angle Load Angle Load Angle Load Radius Angle Load Angle Load Angle Load Angle Load Angle Load Radius RATINGS OUTRIGGERS ON OUTRIGGERS Rating Rating (deg) (kg) (deg) (kg) MAIN (deg)BOOM (kg) LOAD(m) (deg) (kg) (deg) (kg) (deg) MAIN (kg) BOOM (deg) LOAD (kg)RATINGS (deg) ON(kg) Extended and Down 360˚ or Retracted and Down Front/Rear Retracted and Down 360˚ (m) (kg) (kg) 78,5 15 225 78 8490 73 9495 63,5 10 675 2,6 10,7 m Boom 14,3 18,0 m Boom 21,5 m Boom 7,0 m Boom 18,0 m Boom 807,0 m 12 Boom 600 79,5 6580 10,7 m Boom 14,3 m Boom 76,5 14 975 76 7220 70,5 7955 59 8805 3,0 m Boom 1,8 13 600 9525 21,5 m Boom Boom11 Rated Boom Rated Boom Rated Boom Boom Boom 78 725 77,5 Rated 5215 Boom Rated Boom Rated 74 13 275 73,5 5640 Boom 67 6100 Rated 52,5 6625 Rated 3,7 2,6 11 300 Rated 6875Boom Rated Angle10 925 Load 79 Angle 8255 Load Angle Load Angle Load Angle Angle Radius76 Radius 79 Load 4095Angle Load 75,5 Load 4370 Angle 71 11 950 71 4680 Angle 63 5010 Load 45,5 5390 4,3 3,0 9105 Load 5040Angle Load (kg) 77,5 (kg) (kg) (deg) 7595 (deg) (deg) (kg) (kg) (deg) (kg) (deg)10 150 (m) (deg) 77 (kg) 3505 (deg) 3,7 73,5 (kg) 3715 (deg) 68,5 10 875(m) 74 68,5 3950 59,5 (deg) 4195 (kg) 37 4430 4,9 6525 4070(deg) (kg) 3030 78 71,5 10 675 3190 7375,5 9495 66 10 0002,6 7264,5 9365 65,5 3375 55,5 3570 5,5 22 650 75,5 63,5 73,5 7030 15 550 78,5 1526 225 3645 8490 2,6 4,3 5530 3445 2760 76 2900 70,574 7955 63,5 9070 3,0 70,560 8510 63,5 3055 52 3225 6645 17 575 74,5 5970 8805 71 15 650 76,5 140975 3245 80 12 600 7220 79,5 6580 5,9 3,0 4,9 4435 2950 52,5 15 825 7267 14 250 74 13–275 1146,5 725 5640 77,5 5215 3,7 2305 73,5 2415 67 72 6100 7575 3,7 67,554 7155 2535 67,5 6625 60 2665 60 –78 6075 6,7 5,5 3880 2545 14 175 70,5 63,5 5670 12 900 8255 45,5 63 70 5010 71 11 – 950 4680 75,5 1041,5 925 79 4370 4095 4,3 2025 71 2115 6715 4,3 65 47 6365 2215 65 5390 57 2295 57 –76 7,3 6,1 3425 2210 79 12 100 68,5 59,5 5330 3763 4430 11 825 68,5 10–875 73,5 10 36 150 77,5 3715 3505 4,9 1785 68,5 3950 1860 59,5 68,5 4195 5965 4,9 63 39 5710 1945 54 1975 7595 54 –74 7,9 6,7 3045 1930 77 29 10 500 7030 26 3645 55,5 10 650 66 10 000 55,5 3570 65,5 3375 72 9365 75,5 71,5 3190 75,5 3030 5,5 5,5 1580 5155 67 1640 66,5 5205 60,5 1715 60,5 51 1710 51 – 29 4945 – 8,5 7,3 2710 1685 0 9545 65,5 52 4445 9695 63,5 9070 70,5 8510 74,5 3055 70 2900 74 2760 5,9 1395 63,5 1450 52 65 3225 46605,9 58,50 4625 1515 58,5 3245 47,5 1490 6645 47,5 – 20 – 9,1 7,9 2350 1480 72 – 7905 6075 60 7575 67,5 7155 2535 67,5 2415 72 2305 6,7 1260 60 6446 4180 63,5 2665 4270 6,7 56,5– 4240– 1365 56,5 –1310 46,5 45 1320 45 – 0 – 9,6 8,5 2050 6785 5670 – 57 6715 2215 65 6365 70,5 21151255 70 2025 7,3 1070 57 61,541 3725 7,3 53,5 – 3725– 1140 53,5 – 1110 41,561 2295 40 – 40 –65 – 3695 – 10,4 9,1 1800 1055 68,5 5330 –51 –980 36 59 1975 5905 54 5965 1945 5710 68,5 63 1860 1785 7,9 6036 945 54 3380 7,9 51 – 3395– 995 36 – 36 –63 – 3375 – 11,0 9,8 1550 4945 – 5215 51 5205 1715 60,5 5155 67– 60,5 1640855 66,5 1580 8,5 5729 3090 830 51 3080 8,5 48,5– 3105– 865 48,5 – 865 29 57 1710 31 31 – – – 11,6 10,4 1365 1450705 65 – 4445 – – 20 4640 47,5 – 20 1490 47,5 4660 58,5 4625 1515 58,5 65,5 1395 9,1 9,1 550 55 1320 730 45 45,5 – 760 25 2815 9,6 45,5– 2840 25 755 – – 2845 – – 12,2 11,0 1205 – 4255 4180 – 0 45 4270 56,5 4240 1365 56,5 1310575 63,5 64 1260 9,6 53 – 42,5 – 665 17,5 259010,442,5– 2605 17,5 640 – – 2625 – – 12,8 – 3695 – – 53 – 40 3725 53,5 – 635 40 1140 53,5 3725 61,5 1110460 61 1070 11,6 1065 10,4 51,5– 40,5 – 595 0 244011,0 40.5– 2440 0 560 – – 2465 – –51 13,3 – 3375 – –51,5 – 36 3380 – 570 36 995 3395 60 51 980360 59 945 11,0 12,2 940 48,5– – – 11,6 36 – 2210– – – – 2225 – – 14,0 3090 –36 – 490 – 31 –48,5 – 475 31 3080 48,5 3105 57– 865 48,5 865265 57 830 11,6 12,8 830 46,5– 32,5 – 405 – – 12,2 32,5 – 2040 – – – 2055 – – 14,6 2845 – – – –46,5 – 405 25 25 2815 45,5 2840 755 45,5 760230 55 55– 730 12,2 13,4 820 44– – – 12,8 28 – 1890– – – – 1900 – – 15,2 – 2625 –28 – 330 – 44 – 340 17,5 17,5 2590 42,5 640 42,5 2605 53– 665195 53 635 12,8 14,0 730 41,5– – – 13,3 23 – 1750– – – – – 1760 – – 15,8 2465 –23 – 260 –41,5 – 0 2440 40.5 – 280 0 560 40,5 2440 51,5 595160 51,5 570 13,3 14,6 650 38,5– – – 14,0 16 – 1600– – – – – 1615– –– –36 16,5 2225 –16 – 190 – –38,5 – 215 – – 2210 48,5 36 490125 48,5 475 14,0 15,2 570 1515– 36,5– – 14,6 0 – – – – – – – 1535– –– 16,9 2055 –0 – 150 – –36,5 – 180 – 32,5 2040 46,5 – 32,5 405 46,5 405 14,6 15,8 505 –– 32,5– – 15,2 – – – – – – –28 – 1395 –– 17,7 1900 –– – – – –32,5 – 115 – 1890 – – 28 33090 44 44 340 15,2 16,5 430 –– 29 – – 15,8 – – – – – – –23 – 1295 –– 1760 –– – – –– – – – – – – 23 1750 41,5 260 – 41,5 280 18,3 15,8 17,1 390 1615 –– – – –– – – – – – 1600 38,5 16 190 – 38,5 215 16,5 –– 25 – – 16,5 – – – – – – –16 – 1210– –– 18,9 17,7 340 1535 –– – – – –– – – – – 1515 36,5 0 150 – 36,5 180 16,9 –– 20– – 16,9 – – – – – – –0 – 1125– –– 19,5 18,3 290 1395 –– – – – – –– – – – – 32,5 – – – – 32,5 115 17,7 –– 13 – – 17,7 – – – – – – –– – 1045 –– 20,1 18,9 240 1295 –– – – – –– – – – – – – – – – 29 – – 18,3 –– 0– – 18,3 – – – – – – –– – 1010 –– 20,4 19,5 195 – – – – 1210 – – – – – – – – – – – 25 – – – – 18,9 18,9 – – – 1125 – – – – – – – – – – – – 20 – – – – 19,5 19,5 20,1 155 – – 1045 – – – – – – – – – – – – 13 – – – – – 20,1 20,1 20,4 135 20,4

1,5 m Boom Rated Load oom (kg) ngle eg)

79 77 5,5 74 72 70 68,5 66,5 65 63,5 61 59 57 55 53 1,5 8,5 6,5 44 1,5 8,5 6,5 2,5 – – – – –

4095 3505 3030 2760 2305 2025 1785 1580 1395 1260 1070 945 830 730 635 570 475 405 340 280 215 180 115 – – – – –

–

Any Boom Length Front 360° Radius Rating Rating (m) (kg) (kg) 13 600 1,8 9525 11 300 2,6 6875 9105 3,0 5040 6525 3,7 4070 5530 4,3 3445 4435 4,9 2950 3880 5,5 2545 3425 6,1 2210 3045 6,7 1930 2710 7,3 1685 2350 7,9 1480 2050 8,5 1255 1800 9,1 1055 1550 9,8 855 1365 10,4 705 1205 11,0 575 1065 11,6 460 940 12,2 360 830 12,8 265 820 13,4 230 730 14,0 195 650 14,6 160 570 15,2 125 505 15,8 90 430 16,5 – 390 17,1 – 340 17,7 – 290 18,3 – 240 18,9 – 195 19,5 – 155 20,1 – 135 20,4 – RATING REDUCTIONS FOR LOAD HANDLING DEVICES INSTALLED (kg) FROM MAIN BOOM

1010

20,4

–

RATING REDUCTIONS FOR LOAD HANDLING DEVICES INSTALLED (kg) FROM MAIN BOOM

–

FROM JIB

MAIN BLOCK

215

N/A

HOOK & BALL

JIB STOWED

N/A

JIB DEPLOYED

230

RATING REDUCTIO HANDLING DEVICES

MAIN BLOCK JIB STOWED JIB DEPLOYED

HOIST ROPE: 16 mm diameter 8 x 26 XIPS IWRC BRIGHT Min. req'd breaking strength = 258,9 kN

15°

3) For operating radius not shown, use load rating of next larger radius. FROM JIB

JIB STOWED

N/A

JIB DEPLOYED

230

4) The rated loads shown on outriggers do not exceed 85% of actual tipping. The rated loads shown on rubber do not exceed 75% of actual tipping. These ratings are based on freely suspended loads with the crane leveled, standing on a firm, uniform supporting surface. Practical working loads depend on supporting surface, operating radius and other factors affecting stability. Hazardous surroundings, climatic conditions, experience of personnel and proper training must all be taken into account by the operator.

N/A

HOIST ROPE: 16 mm diameter 8 x 26 XIPS IWRC BRIGHT Min. req'd breaking strength = 258,9 kN

REAR

HOIST ROPE: 16 8 x 26 XIPS IW Min. req'd breaking st 30° 15°

15°

30°

SIDE

FRONT

5) The weights of all load handling devices such as hooks, hook blocks, slings, etc., except the hoist rope, shall be considered part of the load. See reduction chart. 6) Ratings on outriggers are for either outriggers fully extended and down or fully retracted and down. Ratings for outriggers fully retracted and down will apply for any intermediate outrigger setting. 7) Ratings on rubber depend on tire capacity, condition of tires and proper inflation pressure (7.6 bar). When replacing tires, contact Manitowoc for proper specifications. Loads on rubber may be transported at a maximum seed of 4,0 km/h on a smooth, hard, level surface with boom retracted to the shortest length possible and centered over front. For 360° ratings on rubber, rear axle oscillation locks must be in place. Do not use jib with crane on rubber. 8) The maximum combined total boom and deck load is 9070 kg. The maximum deck load only is 13 610 kg. 9) Do not induce any external side loads to boom or jib. 80024905YB

15°

FRONT SIDE

2) Rated load columns for discrete boom lengths apply when actual boom length is within +/- 0,3 m of discrete length. When boom length or radius or both are between points listed on capacity chart, the smallest load shown at either the next larger radius or boom length shall be used.

FR MAIN

2 MAXIMUM PERMISSIBLE = 5670 k

30°

Any B Radius Fron (m) Rati 1,8 (kg 2,6 13 60 3,0 11 30 3,7 910 4,3 652 4,9 5530 5,5 443 6,1 388 6,7 342 7,3 304 7,9 2710 8,5 2350 9,1 205 9,8 1800 10,4 1550 11,0 1365 11,6 1205 12,2 1065 12,8 940 13,4 830 14,0 820 14,6 730 15,2 650 15,8 570 16,5 505 17,1 430 17,7 390 18,3 340 18,9 290 19,5 240 20,1 195 20,4 155 135

HOOK & BALL

MAXIMUM PERMISSIBLE SINGLE LINE PULL = 5670 kg

30°

MAXIMUM PERMISSIBLE SINGLE LINE PULL = 5670 kg

30°

SIDE

HOOK & BALL

15° FRONT

–

OPERATION OF THIS EQUIPMENT IN EXCESS OF RATING CHARTS AND DISREGARD OF INSTRUCTIONS IS DANGEROUS AND VOIDS WARRANTY.

215

SIDE

–

SHADED AREAS ARE GOVERNED BY STRUCTURAL STRENGTH, DO NOT RELY ON TIPPING.

MAIN BLOCK

Grove YB7725

–

NOTES: JIB CAPACITY IS LIMITED BY BOTH STRUCTURAL CAPACITY CHART AND MAIN CAPACITY CHART.

MAIN BOOM ON RUBBER

MA ON

SIDE

46,5 41,5 36 29 20 0 – – – – – – – – – – – – – – – – – –

2665 2295 1975 1710 1490 1320 – – – – – – – – – – – – – – – – – –

60 57 54 51 47,5 45 40 36 31 25 17,5 0 – – – – – – – – – – – –

2535 2215 1945 1715 1515 1365 1140 995 865 755 640 560 – – – – – – – – – – – –

67,5 65 63 60,5 58,5 56,5 53,5 51 48,5 45,5 42,5 40,5 36 32,5 28 23 16 0 – – – – – –

2415 72 2305 3880 5,5 2545 2115 70 2025 3425 6,1 2210 1860 68,5 1785 3045 6,7 1930 1640 66,5 1580 2710 7,3 1685 1450 65 1395 2350 7,9 1480 1310 63,5 1260 2050 8,5 1255 1110 61 1070 1800 9,1 1055 980 59 945 1550 9,8 855 865 57 830 1365 10,4 705 760 55 730 1205 11,0 575 665 53 635 1065 11,6 460 595 51,5 570 940 12,2 360 490 48,5 475 830 12,8 265 OUTRIGGERS (kg) 5,2 m JIB CAPACITY ON EXTENDED 405 46,5 405 820 13,4 230 330 44 340 Offset Angle 14,0 Jib 730 195 Main41,5 260 280 650 14,6 160 15° 30° 190 215 0° Boom38,5 570 15,2 125 150 180 m To 21,5 Any Angle36,5 To 18,0 m To 18,0 15,8 m 505 90 To 21,5 m – 32,5 115 Boom 430Main – 16,5 Main Main –(deg) – Main – Length 390 17,1 Boom – Boom Boom – – Boom – 340 17,7 – – 80 – – 2270 1590 –– 290 2270 – 18,3 – 75 – – – 2000 – 2000 1410 3400 240 18,9 – – – 70 – 1770 1270 2770 195 1770 – 19,5 65 2090 1590 1160 2270 155 1590 – 20,1 135 1430 – 20,4 60 1720 1430 1070 1950

DIN/ISO load chart

55 50 45 40 35 30 25 20 15 10 5 0

1500 1290 1290 1720 1320REDUCTIONS1180 1180 1540 RATING FOR LOAD 1180 DEVICES INSTALLED 1090 (kg) 1090 1380 HANDLING FROM FROM 1090 1020 1020 1270 MAIN 0980 BOOM JIB 0980 0930 1180 215 MAIN BLOCK0880 N/A 0940 0840 1090 50 50 HOOK & BALL0790 0930 0780 1040 JIB STOWED 0730 00910 N/A 0720 1000 JIB DEPLOYED0680 230 0 0880 0690 0950 0660 – – 0930 MAXIMUM PERMISSIBLE SINGLE LINE PULL 0660= 5670 kg – – 0920 0650 – – 0910

1000 0950 0910 0880 0860 0830 – – – – – –

HOIST ROPE: 16 mm diameter 8 x 26 XIPS IWRC BRIGHT Min. req'd breaking strength = 258,9 kN SIDE

15° 30°

15°

FRONT

REAR

30°

SIDE

1) The rated loads are the maximum lift capacities as determined by operating radius, boom length and boom angle. The operating radius is the horizontal distance from a projection of the axis of rotation to the supporting surface, before loading, to the center of vertical hoist line or tackle with load applied. 2) Rated load columns for discrete boom lengths apply when actual boom length is within +/- 0,3 m of discrete length. When boom length or radius or both are between points listed on capacity chart, the smallest load shown at either the next larger radius or boom length shall be used. 3) For operating radius not shown, use load rating of next larger radius. 4) The rated loads shown on outriggers do not exceed 85% of actual tipping. The rated loads shown on rubber do not exceed 75% of actual tipping. These ratings are based on freely suspended loads with the crane leveled, standing on a firm, uniform supporting surface. Practical working loads depend on supporting surface, operating radius and other factors affecting stability. Hazardous surroundings, climatic conditions, experience of personnel and proper training must all be taken into account by the operator.

5) The weights of all load handling devices such as hooks, hook blocks, slings, etc., except the hoist rope, shall be considered part of the load. See reduction chart. 6) Ratings on outriggers are for either outriggers fully extended and down or fully retracted and down. Ratings for outriggers fully retracted and down will apply for any intermediate outrigger setting. 7) Ratings on rubber depend on tire capacity, condition of tires and proper inflation pressure (7.6 bar). When replacing tires, contact Manitowoc for proper specifications. Loads on rubber may be transported at a maximum seed of 4,0 km/h on a smooth, hard, level surface with boom retracted to the shortest length possible and centered over front. For 360° ratings on rubber, rear axle oscillation locks must be in place. Do not use jib with crane on rubber. 8) The maximum combined total boom and deck load is 9070 kg. The maximum deck load only is 13 610 kg. 9) Do not induce any external side loads to boom or jib.

80024905YB

Symbols glossary Axles

Boom

Boom elevation

Boom extension

Boom length

Boom nose

Brakes

Cab

Counterweight

Grade

Outriggers

Drive

Heavy duty jib

Radius

Electrical system

Hoist

Rotation

Hookblock

Speed

Hydraulic system

Steering

Engine

Extension

Frame

Fuel tank capacity

Gear

Lights

Oil

Outrigger controls

Suspension

Swing

Tires

Transmission

Grove YB7725

Manitowoc Cranes Regional headquarters Americas Manitowoc, Wisconsin, USA Tel: +1 920 684 6621 Fax: +1 920 683 6277

Europe, Middle East, Africa Ecully, France Tel: +33 (0)4 72 18 20 20 Fax: +33 (0)4 72 18 20 00

China Shanghai, China Tel: +86 21 6457 0066 Fax: +86 21 6457 4955

Greater Asia-Pacific Singapore Tel: +65 6264 1188 Fax: +65 6862 4040

Shady Grove, Pennsylvania, USA Tel: +1 717 597 8121 Fax: +1 717 597 4062

Regional offices Americas Brazil Alphaville Mexico Monterrey Chile Santiago Europe, Middle East, Africa Czech Republic Netvorice France Baudemont Cergy Decines Germany Langenfeld Hungary Budapest Italy Lainate Netherlands Breda Poland Warsaw Portugal Baltar Russia Moscow South Africa Johannesburg U.A.E. Dubai U.K. Buckingham

ÂŠ2012 Manitowoc Form No. YB7725 PG Part No. 09-007 /1M / 1112

China Beijing Chengdu Guangzhou Xian Greater Asia-Pacific Australia Brisbane Melbourne Sydney India Chennai Delhi Hyderabad Pune Korea Seoul Philippines Makati City Singapore

Factories Brazil Passo Fundo China TaiAn Zhangjiagang France Charlieu Moulins Germany Wilhelmshaven India Pune Italy Niella Tanaro Portugal Baltar FĂ˘nzeres Slovakia Saris USA Manitowoc Port Washington Shady Grove

This document is non-contractual. Constant improvement and engineering progress make it necessary that we reserve the right to make specification, equipment, and price changes without notice. Illustrations shown may include optional equipment and accessories and may not include all standard equipment.