Shuttlelift-3340B-Series-Product-Guide by Felix Abad

Shuttlelift CD3300 Series Product Guide

Features • CD3330F: 7,7 t (8.5 USt) three-section boom with 7,6 m (25 ft 2 in) tip height • CD3330FL: 7,7 t (8.5 USt) three-section boom with 10,2 m (33 ft 6 in) tip height • CD3339: 8,1 t (9 USt) three-section boom with 11,6 m (38 ft 2 in) tip height • CD3340B: 9,5 t (10.5 USt) three-section boom with 11,6 m (38 ft 2 in) tip height • 1,8 m (6 ft) fixed extension (CD3330F/ CD3330FL) and 3,6 m (12 ft) offsettable swingaway extension (CD3339 and CD3340B) • 74,5 kW (100 bhp) Tier IV Cummins diesel engine or 59,6 kW (80 bhp) GM EFI dual fuel engine

Features Boom

Standard: 6,4 m (21 ft) main boom on the CD3330F. 9,1 m (30 ft) main boom on the CD3330FL. 10,0 m (32 ft 10 in) main boom on the CD3339 and CD3340B. Optional: Manual fourth main boom section adds 3,0 m (10 ft) additional main boom length on CD3330F and CD3330FL only.

Pivoting boom nose

Standard on the CD3339 and CD3340B the exclusive pivoting boom nose allows operators to decrease the overall boom head depth and operate in more confined areas.

Cab

Standard: Open air cab shell with overhead safety glass. Optional: Closed cab with split hinged door, heater/defroster, and all window glass.

Steering

Standard: Two-wheel, four-wheel, and crab steer with electronic self alignment (CD3340B). Standard: Two-wheel, four-wheel, and crab steer on other CD3300 Series models. Optional: Electronic self-alignment on other CD3300 Series models.

Engine (Tier IV)

Standard: Cummins QSB 3.3 L turbo-charged diesel rated at 74,5 kW (100 bhp) at 2600 rpm.

Contents

Specifications Superstructure

Load indicator (wireless LSI)

Boom CD3330F: 2,9 m – 6,5 m (9 ft 8 in – 21 ft 2 in) three- section full power boom. Maximum tip height: 7,6 m (25 ft 2 in) CD3330FL: 3,8 m – 9,2 m (12 ft 8 in – 30 ft 2 in) three- section full power boom. Maximum tip height: 10,2 m (33 ft 6 in) CD3339 and CD3340B: 4,2 m – 10,0 m (13 ft 10 in – 32 ft 10 in) three-section full power boom. Maximum tip height: 11,6 m (38 ft 2 in) *Optional boom CD3330F and CD3330FL: Manual fourth main boom fly section adds 3,0 m (10 ft) additional boom length.

A simple, effective, and easy to use load indicating system used in conjunction with the anti-two block system to assist the operator in efficient operation of the unit within the limits of the load chart. The display panel displays the hook load and warns the operator when a preset load capacity is exceeded. The warning is by a flashing light on the display panel. In conjunction with the load display panel (receiver), there is a wireless transmitter and load sensing pin attached to the boom head that transmits the hook load to the display panel. *Load Moment Indicator (hardwired LMI) Digital display of boom angle, boom length, boom radius, capacity, and allows for operator in-put to set the limits based on load chart. Displays color coded light bar and audible alarm with function cutout if load exceeds entered parameters.

*Boom extension

Swing

CD3330F and CD3330FL: 1,8 m (6 ft) fixed pin on extension CD3339 and CD3340B: 3,6 m (12 ft) offsettable extension. 3,6 m - 5,4 m (12 ft - 18 ft) telescopic offsettable extension Boom nose CD3330F and CD3330FL: Single sheave non-pivoting CD3339 and CD3340B: Single sheave, three-position (0˚, + 30˚, + 80˚) pivoting boom nose for minimizing head space requirements. Lowers head height. 0,26 m (10.5 in) when nose is pivoted fully forward. Boom elevation Single double acting hydraulic cylinder with integral holding valve. Elevation: 0° to 60° for the CD3330F / FL. 0° to 72° for the CD3339 and CD3340B Anti-two block device

Ball bearing swing circle with 360° continuous rotation. Hydraulic driven worm gear and pinion. Maximum speed: 2.05 rpm Hydraulic system CD3330F / FL: (2) gear pumps CD3339 and CD3340B: Variable displacement piston pump and piggyback gear pump. Combined flow: 107,9 Lpm (28.5 gpm) Maximum system operating pressure: 3600 psi CD3330F / FL: Six section valve bank mounted in dash panel with direct mechanical linkage for low effort lever control. CD3339 and CD3340B: Six section valve bank chassis mounted; operated via dash mounted, pilot pressure hydraulic joysticks. Return line filter with full flow by-pass protection and service indicator. 170 L (45 gal) hydraulic reservoir with sight level gauge and steel side plating to guard against side impact damage.

Standard anti-two block device, when activated, provides an audible warning to the crane operator and disengages all crane functions whose movement can cause two-blocking.

*Denotes optional equipment

Specifications Superstructure continued

Hoist specifications CD3330F / FL: Worm drive with counter-balance valving. Equal speed power up and down. CD3339 and CD3340B: Piston motor drive with spring applied/hydraulic released brake. Drum diameter: CD3330F / FL: 0,24 m (9.69 in) CD3339 and CD3340B: 0,27 m (10.63 in) Maximum single line pull: CD3330F / FL: 4854 kg (10,700 lb) CD3339 and CD3340B: 6350 kg (14,000 lb) Maximum single line speed: CD3330F / FL: 26,8 m/min (88 fpm) CD3339 and CD3340B: 36,6 m/min (120 fpm) Maximum permissible single line pull: CD3330F / FL: 3855 kg (8,500 lb) (12,7 mm [1/2 inch] Python Ultra XIPS) CD3339 and CD3340B: 4536 kg (10,000 lb) (14,0 mm [9/16 inch] EEIPS) Rope length : CD3330F / FL: (three-section boom): 29,6 m (97 ft) (four-section boom): 39,6 m (130 ft) CD3339 and CD3340B: 36,6 m (120 ft)

Outrigger controls CD3330F, CD3330FL and CD3339: Lever controls located on dash panel which operate the beams in pairs from side to side. *Independent outrigger controls available as an option. CD3340B: Two switch operation mounted on dash panel. One -three- position rocker switch to select individual beams or jacks. Separate -four- way toggle switch to activate beams out/in and jacks down/ up. Level bubble indicator located inside operators compartment. Engine (Tier IV) Cummins QSB 3.3 L, four-cylinder, turbo-charged diesel rated at 74.5 Kw (100 hp) at 2600 rpm. Standard 110v engine block heater and cold weather intake grid heater. Diesel oxidation/catalyst, stainless steel muffler/exhaust system to meet 2012 EPA emissions, combined with a Cummins direct air flow, two-stage cyclonic air filter system. Maximum torque: 413,5 Nm (305 lb ft) Note: Required for sale in North American and European Union countries. Standard engine (Tier III)

Carrier

Frame High strength alloy steel constructed with integral outrigger housings; front and rear lifting, towing, and tie-down lugs. 38 ft2 carrydeck size with 6350 kg (14,000 lb) carrying capacity (CD3330F, CD3330FL and CD3339) and 7711 kg (17,000 lb) carrying capacity (CD3340B). Deck coated with anti-skid treatment. Outriggers

Cummins QSB 3.3 L turbo-charged diesel rated at 63,4 kW (85 bhp) at 2600 rpm. Supplied with 110 V engine block heater and air intake grid heater. *Optional engine G.M. 3.0 L EFI dual fuel (gasoline / L.P.) rated at 59,6 kW (80 bhp) at 2600 rpm. Operators control station

Frame mounted, open air style control station with CD3330F, CD3330FL and CD3339: Front and rear cab shell. Includes all crane functions, driving controls, oblique type beams at all four corners with integral and overhead safety glass. Other standard equipment holding valves. Outrigger pads form an integral part of include a durable weather resistant seat with seat belt, the beam. hourmeter, sight level bubble, and fire extinguisher. CD3340B: Hydraulic telescoping beam with oblique The dash panel includes engine oil pressure gauge, type jack provides extended and down and retracted and engine water temperature gauge, fuel gauge, down lifting capacities. Integral holding valves on both transmission low oil and high temperature warning beam and jack. lights, low battery warning light, and brake system low Padsize CD3300 Series: pressure warning light. 18 cm x 20 cm (7.4 in x 7.8 in) Maximum outrigger pad load: CD3300F/FL: 122 psi CD3339: 135 psi *Denotes optional equipment CD3340B: 387 psi Shuttlelift CD3300 Series

Specifications Carrier continued

Brakes

*Operators control station enclosed Includes the standard cab shell with the addition of front, right, and rear glass, a split (two-piece) hinged door with sliding glass. Front windshield wiper and heater and defroster is included.

Hydraulic actuated internal wet-disc service brakes acting on all four wheels. A dash mounted toggle switch activates the dry disc parking brake on the transmission output yoke with a dash warning light. Suspension Front: Rigid mounted to frame. Rear: Rigid mounted to frame.

Fuel tank capacity 64 L (17 gallon) all steel construction with steel side plate to guard against side impact.

Lights Recessed mounted, includes head, tail, rear work, stop, and turn signals.

Electrical system One 12V maintenance free battery, 820CCA at 0°. Jump start connections. 120 amp alternator.

Maximum speed 35,6 km/h (22 mph)

Drive 4 x 2 – Front axle drive with planetary hubs and limited slip differential. Steer CD3330F/FL/ CD3339: two-wheel, four-wheel with crab steer CD3340B: two-wheel, four-wheel, and crab steer with electronic self alignment. Transmission CD3330F, CD3330FL, CD3339: Synchromesh -fourspeeds forward and reverse with stalk mounted forward/ reverse selector. CD3340B: Powershift -fourspeeds forward and reverse. Stalk mounted shifter on left side of steering column. Axles

Gradeability (theoretical) CD3330F, CD3330FL, CD3339: 57%....no load 31%.... 5443 kg (12,000 lb) load CD3340B: 68%....no load 40%.... 9072 kg (20,000 lb) load Gross vehicle weight (G.V.W.) CD3330F: 6777 kg (14,940 lb) CD3330FL: 7366 kg (16,240 lb) CD3339: 7532 kg (16,605 lb) CD3340B: 8009 kg (17,656 lb) *All weights with enclosed cab Miscellaneous standard equipment Single sheave, “Quick Reeve” style hook block.; CD3330F and CD3330FL: 8,0 t (8.5 USt) CD3339: 8,1 t (9USt) CD3340B: 10 t (10.5 USt) Back-up alarm

Front: Carraro planetary drive/steer with internal multi-wet-disc brakes and limited slip differential. Rear: Fabricated non-drive steer with disc brakes Tires 10.00 x 15 pneumatic

*Denotes optional equipment

Dimensions CD3330F 1,11 m (3' 7.75") 0,99 m (3' 3")

2,01 m (6' 7.5")

1,33 m (5' 1 1.88")

1,88 m (4' 2.88")

0,60 m (1' 1 1.5")

0,08 m (3.12")

1,0 m (3' 3.5") 0,30 m (1' 0")

0,30 m (1' 0") 0,46 m (1' 6") 1,74 m (5' 8.38")

1,00 m (3' 4.5")

1,70 m (5' 7") 1,82 m (5' 1 1.88")

3,84 m (12' 7")

1,74 m (5' 8.38") 3,65 m (11' 11.75")

0,97 m (3' 2")

2,39 m (7' 10") 1,77 m (5' 9.7") 1,07 m (3' 6") On tires 0,25 m (9.5") 1,60 m (5' 3") 1,99 m (6' 6.25")

Shuttlelift CD3300 Series

3,10 m (10' 2")

1,93 m (6' 4") 2,81 m (9' 2.75")

Turning radius CD3330F

A Radius

E Radius

D Radius

C Radius B Radius

Two-wheel steer

4496 mm (14 ft 9 in)

4737 mm (15 ft 6.5 in)

4636 mm (15 ft 2.5 in)

2718 mm (8 ft 11 in)

5525 mm (18 ft 1.5 in)

Four-wheel steer

3048 mm (10 ft 0 in)

3645 mm (11 ft 9.5 in)

3188 mm (10 ft 5.5 in)

1473 mm (4 ft 10 in)

3569 mm (11 ft 8.5 in)

THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual craneâ&#x20AC;&#x2122;s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.

Range diagram CD3330F

35 40

60°

45°

30°

15°

10 0°

0 10

5 6' jib

3-SECTION

4-SECTION

Boom and extension length in feet

Height from the ground in feet

10 40

0 35

Operating radius in feet from axis of rotation

Shuttlelift CD3300 Series

Load chart CD3330F 3-SECTION BOOM OR 4-SECTION BOOM WITH 4TH RETRACTED ON OUTRIGGERS (lb) F/R

16.0

360°

F/R

360°

MAIN BOOM

6100

4300

2150

ON OUTRIGGERS (lb) F/R

* 17,000 17,000 10,000 10,000 * 14,400 15,700 10,000 7450 12,400 10,800 4400 7150 3-SECTION BOOM OR 10,200 8600 2950 4700 4TH RETRACTED 4-SECTION BOOM WITH 8500 2175 7000 3400 7200 5400 1700 ON OUTRIGGERS (lb) 2650 ON RUBBER (lb) 6100 4300 1325 2150 360° 5000F/R 3550 360° 1775 F/R 1100 2700 *2700 * 17,000 1525 10,000 950 10,000 17,000 2600 *2600 * 14,400 1350 10,000 825 15,700 7450 2200 2200 675 150 1 * 12,400 10,800 4400 7150 2950 4700 -10,200 - 8600 2175 3400 - 8500 - 7000 1700 2650 - 7200 - 5400 -

JIB

* 5.0 * 6.0 * 8.0 10.0 12.0 RADIUS 14.0(ft) 16.0 18.0 20.0 5.0 22.0 6.0 24.5 8.0 26.0 10.0 28.0 12.0 30.0 14.0 31.0

4-SECTION BOOM WITH 4TH EXTENDED RADIUS (ft)

ON RUBBER (lb)

1325

5.0 6.0 8.0 10.0 12.0 14.0 16.0 18.0 20.0 22.0 24.5 26.0 28.0 30.0 31.0

MAIN BOOM

RADIUS (ft)

6100 6100 5300 4700 4400 RADIUS 4400 (ft) 4400 4400 4300 5.0 3700 6.0 3100 8.0 2700 10.0 2500 12.0 2300 14.0 2200

16.0

360°

ON RUBBER (lb) F/R

360°

JIB STRUCTURAL CAPACITIES (lb) MAIN BOOM 3-SECTION BOOM OR 4-SECTION BOOM ANGLE 4-SECTION BOOM WITH 4TH EXTENDED (deg) WITH 4TH RETRACTED

6100 6100 6100 60 6100 6100 6100 55 5300 5250 5300 4-SECTION BOOM 4TH EXTENDED 50 4700 4700 WITH3750 2450 4400 3800 45 1875 2900 ON4400 OUTRIGGERS (lb) ON RUBBER (lb) 40 4400 1525 2325 35 F/R 360° F/R 360° 4100 1225 1900 30 3150 1000 1600 6100 6100 6100 6100 25 850 2700 1375 6100 6100 6100 6100 20 2300 700 1200 5300 5300 5250 5300 15 2125 650 100 1 4700 4700 3750 4700 10 575 1900 975 4400 2450 4400 3800 475 1700 850 5 4400 4400 1875 2900 1625 425 800 0

4400 1525 2325 4100 1225 1900 20.0 4300 3150 1000 1600 850 22.0 3700 2700 1375 3100 2300 700 24.5 1200 2700 2125 650 26.0 100 1 1) The rated are the maximum 575 2500 loads 1900 975 28.0 475 850by 30.0 2300 lift capacities as 1700 determined 2200 1625 425 800 31.0 4400

* LIMIT LB WHEN 1775 3RD SECTION 5000TO 11,800 18.0RATINGS 3550 1100IS EXTENDED 18.0ANY AMOUNT. 4400 2700 950 1525 825 2600 1350 2200 675 150 1 - BY BOTH - STRUCTURAL LIMITED -

JIB

2700 20.0 2600 22.0 2200 24.5 26.0 NOTES: 28.0 - IS 30.0 JIB CAPACITY 31.0

CAPACITY CHART AND MAIN CAPACITY CHART. operating radius, boom extension and boom angle. The operating * LIMIT RATINGS TO 11,800 LB WHEN 3RD SECTION IS EXTENDED ANY AMOUNT. SHADED AREAS ARE GOVERNED BY STRUCTURAL radius is the horizontal distance STRENGTH, DO NOT RELY ON TIPPING. from a projection of the axis of SIDE rotation to the supporting surface, OPERATION OF THIS EQUIPMENT IN EXCESS OF before loading, to the center of 15° 15° RATING CHARTS AND DISREGARD 30° OF vertical hoist line or tackle with load 30° INSTRUCTIONS IS DANGEROUS applied. FRONT REAR AND VOIDS WARRANTY. SIDE 2) The rated loads shown on outriggers do not exceed 85% of actual REDUCTION CHART tipping. The rated loads shown on FROM FROM MAIN BOOM JIB rubber do not exceed 75% of actual SIDE RATINGS RATINGS tipping. These ratings are based MAIN 140 lb N/A 15° 15° BLOCK on freely suspended loads with the 30° 30° crane leveled, standing on a firm, HOOK & BALL 100 lb 100 lb FRONT REAR uniform supporting surface. PractiJIB, STOWED 0 lb N/A cal working loads depend on supSIDE porting surface, operating radius 150 lb 0 lb JIB, DEPLOYED and other factors affecting stability. REDUCTION CHART Hazardous surroundings, climatic RIGGING CHART FROM FROM MAIN BOOM JIB conditions, experience of personRATINGS RATINGS 1-P ART 2-PART nel and proper training must all be 0-8500 lb 0-17,000 lb MAIN BLOCK 140 lb N/A taken into account by the operator. WIRE ROPE: 1/2 inch diameter 100 lb Min. breaking strength 29,750 lb

HOOK & BALL

100 lb

JIB, STOWED

0 lb

N/A

JIB, DEPLOYED

150 lb

0 lb

3) The weights of all load handling devices such as hooks, hook blocks, slings, etc., except the hoist rope, shall be considered part of the load. See reduction chart.

3500 3500 3325 3325 3150 3150 JIB STRUCTURAL CAPACITIES (lb) MAIN 3000 3000 BOOM 2875 3-SECTION BOOM 2875 OR 4-SECTION BOOM ANGLE 2800 2800 4-SECTION BOOM WITH 4TH EXTENDE (deg) 2700 WITH 4TH RETRACTED 2700 2600 2600 3500 3500 60 2500 2500 552400 3325 3325 2400 502325 3150 3150 2325 452250 3000 3000 2250 2875 2875 402200 2200

2800 35 2700 30 25 2600 20 2500 2400 15 10 2325 4) Ratings on outriggers are for 5 2250 either outriggers fully extended and 2200 0

down or fully retracted and down. Ratings for outriggers fully retracted and down will apply for any intermediate outrigger setting.

5) Ratings on rubber depend on tire capacity, condition of tires and proper inflation pressure (100 psi). Loads on rubber may be transported at a maximum seed of 2.5 mph on a smooth, hard, level surface with boom retracted to the shortest length possible and centered over front. 6) For operating radius not shown, use load rating of next larger radius. 7) The maximum combined total boom and deck load is 12,000 lb. The maximum deck load only is 14,000 lb. 8) Do not induce any external side loads to boom or jib.

RIGGING CHART 1-P ART 0-8500 lb

2-PART 0-17,000 lb

WIRE ROPE: 1/2 inch diameter Min. breaking strength 29,750 lb

THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.

1301286CD

2800 2700 2600 2500 2400 2325 2250 2200

Dimensions CD3330FL 1,83 m (6' 0")

1,45 m (4' 9.13")

3,76 m (12' 4") Retracted 9,21 m (30' 2.50") Extended

16,5 cm (6.5")

0,99 m (3' 3")

1,88 m (4' 2.88") 0,60 m (1' 11.5")

0,08 m (3.12")

1,0 m (3' 3.5") 0,30 m (1' 0")

0,30 m (1' 0") 0,46 m (1' 6")

1,00 m (3' 4.5")

1.70 m (5' 7")

1,74 m (5' 8.38")

1,82 m (5' 11.88")

3,65 m (11' 11.75")

4,76 m (15' 7.5") 0,97 m (3' 2")

2,39 m (7' 10") 1,77 m (5' 9.7") 1,07 m (3' 6") 0,25 m (9' 5") On tires 1,60 m (5' 3") 1,99 m (6' 6.25") 3,10 m (10' 2")

Shuttlelift CD3300 Series

1,93 m (6' 4") 2,81 m (9' 2.75")

Turning radius CD330FL

C Radius

E Radius

D Radius B Radius

A Radius

Two-wheel steer

5131 mm (16 ft 10 in)

4737 mm (15 ft 6.5 in)

4636 mm (15 ft 2.5 in)

2718 mm (8 ft 11 in)

5525 mm (18 ft 1.5 in)

Four-wheel steer

3683 mm (12 ft 1 in)

3645 mm (11 ft 9.5 in)

3188 mm (10 ft 5.5 in)

1473 mm (4 ft 10 in)

3569 mm (11 ft 8.5 in)

Range diagram CD3330FL (Three-section boom) 10

36 W '-2.5 ITH " 6'- BOO 0" M JIB

40 45

.5"

45˚

'-2

30˚

17'

-10

.5"

20 15˚

-4"

12'

Boom and extension length in feet

60˚

Height from the ground in feet

10 0˚

5 6' JIB

Operating radius in feet from axis of rotation

Shuttlelift CD3300 Series

Range diagram CD3330FL (Four-section boom) 5

15 4 W 5'-8" ITH B 6'- OOM 0" JIB

60˚

'-7 30

21'

-5"

30˚

15˚ 15

12'

10 0˚

5 6' JIB

Operating radius in feet from axis of rotation

Height from the ground in feet

-4"

Boom and extension length in feet

'-8

45˚

Load chart CD3330FL YB4409XL boom YB4409XL3-section 3-section boom (Three-section boom)

3-SECTION MAIN BOOM

ON OUTRIGGERS (lb) Radius ON OUTRIGGERS (lb) F/R 360˚

Radius (ft) (ft) 5 5 6 6 8 8 10 10 12 12 14 16 14 18 16 20 18 22 20 24 22 26 24 27

F/R

Radius Radius (ft)

360˚

17,000 15,700 17,000 12,400 15,700 10,200 12,400 8500 10,200 7100 8500 6000 7100 5200 6000 4450 5200 3800 4450 3300 3800 2900 3300 2750

3-SECTION MAIN BOOM W/6 FT JIB DEPLOYED 3-SECTION MAIN BOOM W/6 FT JIB DEPLOYED LOADED ON OUTRIGGERS (lb) ON RUBBER (lb) LOADED Radius BOOM ON OUTRIGGERS (lb) ON RUBBER (lb) BOOM Radius ANGLE (ft) 360˚ F/R 360˚ ANGLE F/R (ft) (deg)

3-SECTION MAIN BOOM

(ft)

5 65 86 108 12 10 14 12 16 14 18 16 20 18 22 20 24 22 26 24 27

17,000 14,400 17,000 10,800 14,400 8500 10,800 6950 8500 5800 6950 4650 5800 3800 4650 3150 3800 2700 3150 2350 2700 2050 2350 1925

ON RUBBER (lb)

F/R

10,000 9500 10,000 7325 9500 4875 7325 3550 4875 2750 3550 2150 2750 1775 2150 1450 1775 1225 1450 1025 1225 875 1025 850

360˚

10,000 8200 10,000 5125 8200 3475 5125 2550 3475 1925 2550 1450 1925 1150 1450 950 1150 800 650950 525800 475650

16.4 18 16.4 20 18 22 20 24 22 26 24 28 26 30 32 28 33.5 30

32 33.5

(deg) 3500 F/R 3500 360˚ 2000 3375 3500 3375 35001775 3225 3375 3150 33751450 3075 3225 2700 3150 1225 2950 3075 2350 27001025 2850 2950 2050 2350 875 2625 800 1825 2850 1650 2050 725 2400 1825 650 2175 2625 1475 2000 2400 1375 1650 600 2175 16.5 1475 2000 0 1375

60 57.5 60 53.5 57.5 49 53.5 44.5 49 39.5 44.5 34 39.5 27 16.5 34 27 0

26 26 875 2900 525 2050 27 27 850 2750 1925 NOTES: 1) The rated475 loads are the maximum OPERATE WITH JIB BY RADIUS WHEN MAIN lifting capacities as determined BOOM IS FULLY EXTENDED AND BY BOOM ANGLE by operating radius only. Any WHEN MAIN BOOM IS PARTIALLY EXTENDED. DO combination of boom lengths NOT EXCEED JIB CAPACITIES AT ANY PARTIALLY and angles may be used to obtain EXTENDED BOOM LENGTH. operating radius. The operating radius is the horizontal distance SHADED AREAS ARE GOVERNED BY STRUCTURAL from a projection of the axis of STRENGTH. DO NOT RELY ON TIPPING. rotation to the supporting surface, before loading, to the center of OPERATION OF THIS EQUIPMENT IN EXCESS OF vertical hoist line or tackle with load RATING CHARTS AND DISREGARD OF applied. INSTRUCTIONS IS DANGEROUS AND VOIDS WARRANTY. 2) The rated loads shown on outriggers do not exceed 85% of actual tipping. The rated loads shown on SIDE rubber do not exceed 75% of actual 15˚ 15˚ tipping. These ratings are based 30˚ 30˚ on freely suspended loads with the REAR FRONT SIDE crane leveled, standing on a firm, SIDE uniform, supporting surface. Practi15˚ 15˚ cal working loads depend on sup30˚ 30˚ REDUCTION CHART porting surface, operating radius, REAR FRONT FROM FROM MAIN BOOM JIB and other factors affecting stability. RATINGS RATINGS SIDE Hazardous surroundings, climatic N/A 140 lb MAIN BLOCK conditions, experience of personREDUCTION CHART HOOK & BALL 100 lb 100 lb nel, and proper training must all be FROM FROM MAIN BOOM JIB taken into account by the operator. JIB, STOWED N/A 0 lb RATINGS

RATINGS

150lb lb 140

0 lb N/A

JIB, DEPLOYED MAIN BLOCK

HOOK & BALL RIGGING 100 lbCHART JIB, STOWED

0 lb

JIB, DEPLOYED

150 lb

1-PART 0 - 8500 lb

100 lb N/A

2-PART 0 - 17,000 lb

0 lb

F/R

360˚

650 600

1300 1150 950 800 650 525 425 350 300 250

1300 1150 2000 950 1775 800 1450 650 1225 525 1025 425 875 350 800 300 725 250

4) Ratings on outriggers are with outriggers fully extended. 5) Ratings on rubber depend on tire capacity, condition of tires and proper inflation pressure (100 psi). Loads on rubber may be transported at a maximum speed of 2.5 mph on a smooth, hard, level surface with boom retracted to the shortest length possible and centered over front. 6) For operating radius not shown, use load rating of next larger radius. 7) The maximum combined total boom and deck load is 12,000 lb. The maximum deck load only is 14,000 lb. 8) Do not induce any external side loads to boom or jib. 80017679CD

3) The weights of all load handling devices such as hooks, hook blocks, slings, etc., except the hoist rope, shall be considered as part of the load. See reduction chart.

WIRE ROPE: 1/2 inch diameter Minimum breakingCHART strength 29,750 lb RIGGING

1-PART 0 - 8500 lb

2-PART 0 - 17,000 lb

WIRE ROPE: 1/2 inch diameter Minimum breaking strength 29,750 lb

Shuttlelift CD3300 Series

W/ 4TH RETRACTED

W/ 4TH EXTENDED

ON OUTRIGGERS (lb) ON RUBBER (lb)

Radius (ft) 5

F/R

360°

F/R

360°

Load chart

10000 17000 17000 15700 14400 9500 12400 10800 8000 10200 8500 5400 8500 6950 3800 7100 5800 2750 6000 4650 2150 5200 3800 1800 4450 3150 1500 3800 1300 2700 1100 3300 2350 29004-SECTION 2050MAIN 900 BOOM 2750 W/ 4TH 1925 825 RETRACTED

6 8 10 12 14 16 18 20 22 24 26 27

ON OUTRIGGERS (lb) ON RUBBER (lb)

Radius (ft) 5

F/R

360°

F/R

360°

6 8 4900 4900 4900 10 4300 4300 4300 12 3800 3800 3800 14 3400 3400 3400 16 3100 3100 2900 18 2900 2900 2400 20 2900 1950 2900 22 1600 2900 2900 24 1350 2900 2650 26 4-SECTION 2900 MAIN2300 BOOM 1100 27 2150 1000 W/2900 4TH EXTENDED 28OUTRIGGERS 2750(lb) ON2000 925 Radius ON RUBBER (lb) 30 2450 1800 800 (ft) F/R 360° F/R 360° 32 2200 1600 700 5 - 625 33.5 1975 1400 6 36 1775 1250 550

10000 8200 5600 3800 2700 1950 1450 1150 950 775 600 450 375

Radius ON OUTRIGGERS (lb) ON RUBBER (lb) (ft) F/R 360° F/R 360°

4900 4250 3300 2600 2100 1700 1350 1050 850 700 650 NOTES: 600 OPERATE WITH JIB BY RADIUS WHEN MAIN 500 BOOM 400 IS FULLY EXTENDED (WITH 4TH SECTION 325 EXTENDED OR RETRACTED) AND BY 250 ANGLE WHEN MAIN BOOM IS PARTIALBOOM

CD3330FL (Four-section boom)

5 17000 17000 10000 10000 6 15700 14400 9500 8200 8 12400 10800 8000 5600 8 4900 4900 4900 4900 LY EXTENDED. DO NOT EXCEED JIB CAPACITIES 10 10200 8500 5400 3800 10 4300 4300 4300 4250 3800 12 8500 6950 3800 2700 12 3800 3800 3300 AT ANY PARTIALLY EXTENDED BOOM LENGTH. 14 7100 5800 MAIN 2750 BOOM 1950 W/ 14 3400 3400 2600 4-SECTION 4TH 3400 4-SECTION MAIN BOOM W/ 4TH 4650 3100 3100 2100 16 6000 2150 1450 16 2900 RETRACTED 6 FT JIB EXTENDED W/SHADED 6 FT JIBAREAS DEPLOYED ARE GOVERNED BY STRUC18 5200 3800 W/ 1800 1150DEPLOYED 18 2900 2900 2400 1700 4450 ON OUTRIGGERS 3150 2900 2900 LOADED 1350OUTRIGGERS 20LOADED 1500 (lb)950 20 1950 TURAL STRENGTH. DO(lb) NOT RELY ON TIPPING. ON RUBBER (lb) ON (lb) ON RUBBER Radius22 BOOM 3800 2700 1300 775 22 2900 Radius 2900 BOOM 1600 1050 24 3300 2350 1100 600 24 2900 2650 1350 850 ANGLE (ft) 26 2900 2050 900 2300 ANGLE 1100 700F/R F/R 360° 450F/R 26 360°2900 (ft) 360° F/R OPERATION OF THIS 360° EQUIPMENT IN 27 (deg) 2750 1925 825 375 27 2900 2150 (deg) 1000 650 EXCESS OF RATING CHARTS AND 2000 925 600 16.4 60 3500 3500 2000 28 1300 2750 22 60 2900 2900 1600 1050 30 2450 1800 800 500 DISREGARD OF INSTRUCTIONS IS 18 57.5 3375 3375 1800 32 1150 2200 24 57 2900 2650 1350 850 1600 700 400 DANGEROUS AND VOIDS 20 53.5 3225 3150 1500 33.5 950 1975 26 54 2900 2300 1100 700 WARRANTY. 1400 625 325 1250 550 250 22 49 3075 2700 1300 36 800 1775 28 50.5 2750 2000 925 600

24 44.5 2950 2350 1100 650 30 47 2450 1800 26 39.5 2850 2050 925 525 32 43 2200 1600 4-SECTION MAIN BOOM W/ 4TH 4-SECTION MAIN BOOM W/ 4TH 28 34 RETRACTED 2625 W/ 61825 800 425 33.5 40 1975 1400 FT JIB DEPLOYED EXTENDED W/ 6 FT JIB DEPLOYED 30 27 2400 1650 725 350 36 34.5 1775 1250 LOADED ON OUTRIGGERS (lb) ON RUBBER (lb) LOADED ON OUTRIGGERS (lb) ON RUBBER (lb) 32Radius16.5 2175 1475 650 300 Radius BOOM 38 29 1650 1150 BOOM 33.5(ft) ANGLE 0 2000 1375 600 250 (ft) ANGLE 40 22.5 1550 1075 F/R 360° F/R 360° F/R 360° F/R 360° (deg) (deg) 42 11.5 1450 1000 43 0 1400 1600 950 16.4 60 3500 3500 2000 1300 22 60 2900 2900 1050 18 20 22 24 26 28 30 32 33.5

57.5 53.5 49 44.5 39.5 34 27 16.5 0

3375 3225 3075 2950 2850 2625 2400 2175 2000

3375 3150 2700 2350 2050 1825 1650 1475 1375

1800 1500 1300 1100 925 800 725 650 600

1150 950 800 650 525 425 350 300 250

SIDE 15°

15° 30°

30°

REAR

FRONT SIDE SIDE

REDUCTION CHART

15°

FROM MAIN BOOM RATINGS

30°

FRONT

MAIN BLOCK

JIB, STOWED MAIN BLOCK

JIB, DEPLOYED

HOOK & BALL

RATINGS

SIDE

N/A

140 lb

REDUCTION CHART

HOOK & BALL

15°

FROM 30°

REARJIB

100 lb FROM MAIN BOOM RATINGS

100 FROM JIB RATINGS

140 lb

N/A

0 lb

150 lb

100 lb

N/A 0 lb

100 lb

JIB, STOWEDRIGGING 0 lb CHART N/A JIB, DEPLOYED

150 lb

1-PART 0 - 8500 lb RIGGING CHART

0 lb

2-PART 0 - 17000 lb

1-PART 2-PART WIRE ROPE: 1/2 inch diameter 0 - 8500 lb 0 - 17000 lb Minimum breaking strength 29,750 lb WIRE ROPE: 1/2 inch diameter Minimum breaking strength 29,750 lb

24 26 28 30 32 33.5 36 38 40 42 43

57 54 50.5 47 43 40 34.5 29 22.5 11.5 0

2900 2900 2750 2450 2200 1975 1775 1650 1550 1450 1400

2650 2300 2000 1800 1600 1400 1250 1150 1075 1000 950

1350 1100 925 800 700 625 550 500 450 400 375

1) The rated loads are the maximum lifting capacities as determined by operating radius only. Any combination of boom lengths and angles may be used to obtain operating radius. The operating radius is the horizontal distance from a projection of the axis of rotation to the supporting surface, before loading, to the center of vertical hoist line or tackle with load applied. 2) The rated loads shown on outriggers do not exceed 85% of actual tipping. The rated loads shown on rubber do not exceed 75% of actual tipping. These ratings are based on freely suspended loads with the crane leveled, standing on a firm, uniform, supporting surface. Practical working loads depend on supporting surface, operating radius, and other factors affecting stability. Hazardous surroundings, climatic conditions, experience of personnel, and proper training must all be taken into account by the operator.

850 700 600 500 400 325 250 200 150 125 100

800 700 625 550 500 450 400 375

500 400 325 250 200 150 125 100

3) The weights of all load handling devices such as hooks, hook blocks, slings, etc., except the hoist rope, shall be considered as part of the load. See reduction chart. 4) Ratings on outriggers are with outriggers fully extended. 5) Ratings on rubber depend on tire capacity, condition of tires and proper inflation pressure (100 psi). Loads on rubber may be transported at a maximum speed of 2.5 mph on a smooth, hard, level surface with boom retracted to the shortest length possible and centered over front. 6) For operating radius not shown, use load rating of next larger radius. 7) The maximum combined total boom and deck load is 12,000 lb. The maximum deck load only is 14,000 lb. 8) Do not induce any external side loads to boom or jib. 80017731

Dimensions CD3339 Retracted 4,22 m & Extended 10,01 m (Retracted 13’ 10” & Extended 32’ 10”) 3,5 m (11’ 7.75”)

1,32 m (4’ 4”) 3,39 m (11’ 5.5”)

0,51 m (2’ 2”)

394 m (15.5”)

See Insert

0,46 m (1’ 6”)

0,30 m (1’ 0”)

0,30 m (1’ 0”) 1,00 m (3’ 4.5”) 1,70 m (5’ 7”) 1.74 m (5’ 8.38”)

1,74 m (5’ 8.38”)

1,74 m (5’ 11.88”) 1,70 m (5’ 6.92”)

3,65 m (11’ 11.75”) 0,98 m (3’ 2.5”)

*1,37 m (54.0”)

0° *0° boom head position can only be used with a down haul block

2,21 m (7’ 3”)

1,77 m (5’ 9.7”)

1,03 m (3’ 4.5”) 30°

1,34 m (53.0”)

Dimensions are with boom horizontal and the anti-two block bottomed.

10”

6,35 cm (2.5”)

1,60 m (5’ 3”) 1,96 m (6’ 5”)

1, 10 m (43.5”)

3,10 m (10’ 2”)

80°

1,81 m (9’ 2.75”)

Dimensions are with boom horizontal and the anti-two block bottomed.

Shuttlelift CD3300 Series

Dimensions CD3339

C Radius

E Radius

D Radius

B Radius

A Radius

Two-wheel steer

4674 mm (14 ft 4 in)

4737 mm (15 ft 6.5 in)

4636 mm (15 ft 2.5 in)

2718 mm (8 ft 11 in)

5525 mm (18 ft 1.5 in)

Four-wheel steer

4267 mm (14 ft 0 in)

3645 mm (11 ft 9.5 in)

3188 mm (10 ft 5.5 in)

1473 mm (4 ft 10 in)

3569 mm (11 ft 8.5 in)

Range diagram CD3339 6

72° 15,50 m (50' 10") boom with 3,66 m (12') to 5,49 m (18') telescopic offsettable boom extension

54 52 50

60°

55°

50°

46 44

45°

42 40

40°

10,10 m (32' 10") boom

56 54

65°

Boom and extension length in feet

70°

13,67 m (44' 10") boom with 3,66 m (12') offsettable boom extension

35°

30°

7,11 m (23' 4") boom

32 30

25°

4,22 m (13' 10") boom

28 26

20°

24 22

15°

10°

16 14

14 12

5°

12' Jib

2 0

Height from the ground in feet

18' Jib

4 2 0

Operating radius in feet from axis of rotation

Shuttlelift CD3300 Series

Load chart CD3339 RADIUS RADIUS (ft) (ft)

JIB JIB

MAIN MAINBOOM BOOM

5.0 5.0 6.0 6.0 8.0 8.0 10.0 10.0 12.0 12.0 14.0 14.0 16.0 16.0 18.0 18.0 20.0 20.0 22.0 22.0 24.0 24.0 26.0 26.0 28.0 28.0 31.0 31.0 34.0 34.0 36.0 36.0 38.0 38.0 40.0 40.0 42.0 42.0 44.0 44.0 46.0 46.0 48.0 48.0

ON OUTRIGGERS (lb) ON OUTRIGGERS (lb) F/R 360° F/R 360°

BOOM BOOM ANY BOOM BOOM BOOM BOOM BOOM BOOM EXTENDED ANY EXTENDED BOOM RETRACTED RETRACTED BOOM RETRACTED EXTENDED RETRACTED EXTENDED

18,000 18,000 15,700 15,700 12,200 12,200 10,200 10,200 8400 8400

14,700 14,700 14,400 14,400 12,200 12,200 10,200 10,200 8400 8400 7200 7200 6200 6200 5400 5400 4830 4830 4000 4000 3480 3480 3020 3020 2680 2680 2270 2270 1960 1960 1770 1770 1590 1590 1420 1420 1270 1270 1200 1200 1160 1160 1110 1110

18,000 18,000 15,000 15,000 11,400 11,400 9100 9100 7600 7600

NOTES: JIB CAPACITY IS LIMITED BY BOTH STRUCTURAL CAPACITY CHART AND MAIN CAPACITY CHART. SHADED AREAS ARE GOVERNED BY STRUCTURAL STRENGTH, DO NOT RELY ON TIPPING. OPERATION OF THIS EQUIPMENT IN EXCESS OF RATING CHARTS AND DISREGARD OF INSTRUCTIONS IS DANGEROUS AND VOIDS WARRANTY. SIDE

SIDE 15°

15° 30°

30° 15°

15°

REAR

FRONT

30°

FRONT

REAR

SIDE

SIDE REDUCTION CHART

MAIN BLOCK

FROM FROM REDUCTION CHART MAIN JIB MAIN BOOM FROM FROM RATINGS RATINGS MAIN BOOM MAIN JIB N/A 140 lb RATINGS RATINGS

MAIN & BLOCK HOOK BALL

140lblb 100

HOOK & BALL JIB, STOWED

100 0 lb lb

JIB, JIB,DEPLOYED STOWED

ON RUBBER(lb) ON RUBBER(lb) F/R 360° F/R 360°

450 0 lb lb

100N/A lb

100 lb N/A 0 lb N/A

450 lb CHART JIB, DEPLOYED RIGGING

RIGGING CHART 1-PART 0 - 10,000 lb

0 lb 2-PART 0 - 18,000 lb

1-PART 2-PART 0WIRE - 10,000 lb 9/16 in diameter0 - 18,000 lb ROPE:

Min. breaking strength 35,000 lb

30°

14,700 14,700 14,400 14,400 11,400 11,400 9100 9100 7600 7600 6500 6500 5310 5310 4340 4340 3610 3610 3030 3030 2590 2590 2250 2250 2010 2010 1740 1740 1500 1500 1350 1350 1200 1200 1050 1050 930930 880880 820820 760760

11,500 11,500 10,000 10,000 8100 8100 5480 5480 3920 3920 3040 3040 2420 2420 19701970 1640 1640 13701370 11601160 990990 830830 650650 510 510 430430 350350 280280 210 210 190 190 170 170 140 140

ANY ANY BOOM BOOM

9400 9400 7500 7500 5040 5040 3530 3530 25902590 19701970 15601560 12501250 10201020 850 850 710 710 590 590 490 490 360 360 250 250 180 180 130 130 80 80 60 60 40 40 20 20 0 0

JIB STRUCTURAL CAPACITIES (lb)

JIB STRUCTURAL CAPACITIES (lb) MAIN MAIN BOOM 18 ft JIB 12 ft JIB BOOM 18 ft JIB 12 ft JIB ANGLE ANGLE(deg) 15° 15° 30° 30° 0° 0° (deg) 15° OFFSET 15° OFFSET 30° OFFSET 30° OFFSET 0° OFFSET 0° OFFSET OFFSET OFFSET OFFSET OFFSET OFFSET OFFSET 72 70 65 60 55 50 45 40 35 30 25 20 15 10 5 0

72 7500 5100 3500 7500 5100 70 7000 4800 3400 7000 4800 65 5700 4100 3100 5700 4100 60 4500 3500 2800 4500 3500 553500 3500 2550 3000 3000 502800 2800 2300 2500 2500 452300 2300 2000 2200 2200 4020002000 1900 1800 1900 35 1775 17751675 1675 1600 301600 1600 1500 1400 1500 25 1450 1450 1400 1400 20 1350 1350 1350 1350 15 1300 1300 1300 1300 10 1275 1275 5 1225 1225 0 1200 1200

4000 3300 3750 3100 3200 2700 2800 2400 2450 2150 2150 1950 1900 1750 1700 1600 1525 1450 1400 1300 1275 1200 1175 1125 1100 1100 1050 1025 1000

3300 2300 3100 2200 2700 2000 2400 1850 2150 1700 1950 1600 1750 1500 1600 1400 1450 1350 1300 1300 1200 1125 1100

2300 2200 2000 1850 1700 1600 1500 1400 1350 1300

3) The weights of all load handling devices such as hooks, hook blocks, slings, etc., except the hoist rope, shall be considered as part of the load. See reduction chart.

WIRE ROPE: 9/16 in diameter Min. breaking strength 35,000 lb

3500 4000 3400 3750 3100 3200 2800 2800 2550 2450 2300 2150 2000 1900 1800 1700 1600 1525 1400 1400 1275 1175 1100 1050 1025 1000

1303154CD

Dimensions CD3340B 3,55 m (11' - 7.75")

Retracted 4,22 m (13'-10") and Extended 10,01 m (32' - 10") 3,49 m (11' - 5.5")

660 mm (26")

1,32 m (4' - 4.0")

394 mm (15.5")

See Inset

Main block two-part line

305 mm (12")

254 mm (10") Hook and ball one-part line 1,77 m (5' - 9.5")

1,63 m (5' - 4.1")

1,83 m (6' - 0")

940 mm (37")

2,01 m (6' - 7.0") 1,89 m (6' - 2.5")

1,64 m (5' - 4.5") 3,66 m (12' - 0")

1,14 m (3' - 9.0")

*1372 mm (54")

2,21 m (7' - 3.0")

*0o boomhead position can only be used with headache ball.

1346 mm (53")

2,18 m (7' - 2.0") 1,78 m (5' - 10.0") 1,00 m (3' - 3.5")

30o

1,60 m (5' - 3.0") Track Width 1105 mm (43.5")

1,93 m (6' - 4.0") Frame Width

80o

Dimensions are with the boom horizontal and the anti-two block bottomed.

Shuttlelift CD3300 Series

2,01 m (6' - 7.0") Max. Machine Width 2,06 m (6' - 9.0") C.L.O.R. Ret. and Down 3,40 m (11' - 2.0") C.L.O.R. Ext. and Down

Turning radius CD3340B

A E

C Outside turning radius

D Inside turning radius

Two-wheel steer

4759 mm (15 ft 7.4 in)

4482 mm (14 ft 8.4 in)

4080 mm (13 ft 4.6 in)

2556 mm (8 ft 4.6 in)

4522 mm (14 ft 10.0 in)

Four-wheel steer

3990 mm (13 ft 1.1 in)

3346 mm (10 ft 11.7 in)

2853 mm (9 ft 4.3 in)

1470 mm (4 ft 9.9 in)

3416 mm (11 ft 2.5 in)

Range diagram CD3340B 6

20 22

38 40 42

50'10 WIT " BOO & 6'- H 12'-0 M 0" S " JIB TIN GER

54 52 50

56 54 52 50

48 44'1 WIT 0" BOO H 12 M '-0" JIB

46 44 42

72˚70˚

40 65˚

60˚

10" B

50˚

32'-

55˚

45˚

40˚ M

35˚

4" B

30˚

23'-

Boom and extension length in feet

46 44

25˚

22 20

20˚

18 15˚

0" B

10˚

13'-1

5˚

10 8

0˚

Height from the ground in feet

20 22

40 42

Operating radius in feet from axis of rotation

Shuttlelift CD3300 Series

Load chart CD3340B

ON RUBBER (lb)

ON OUTRIGGERS (lb) RADIUS (ft)

RADIUS (ft)

EXTENDED 360˚ ON OUTRIGGERS (lb) F/R(lb) RETRACTED 360˚ ON RUBBER RETRACTED F/R

EXTENDED 360˚ RETRACTED F/R BOOM BOOM

RETRACTED 360˚

BOOM BOOM RETRACTED EXTENDED RETRACTED EXTENDED BOOM

BOOM

ANY

360˚

ANY BOOM

ANY

JIB

MAIN BOOM

EXTENDED RETRACTED BOOM 11,500 BOOM 21,000 EXTENDED 15,000 4.0 RETRACTED 19,625 13,975 18,000 15,000 14,700 19,62516,800 13,975 13,70011,500 11,500 21,000 4.05.0 11,500 18,000 5.06.0 9400 15,700 14,700 14,400 16,80013,400 13,700 13,40011,500 10,000 15,700 6.08.0 7800 12,200 14,400 12,200 13,400 8700 13,400 870010,000 7600 8.0 51755600 10,200 12,200 10.0 12,200 10,200 8700 6150 8700 6150 7600 6150 4550 6150 10.0 10,2008400 38503875 4550 5175 8400 12.0 10,200 2875 4550 4550 12.0 8400 3000 3425 3850 14.0 8400 7100 3000 2250 3425 14.0 7100 2400 2775 16.0 6000 2400 1800 2775 16.0 6000 19751475 18.0 2300 2300 1975 18.0 50005000 1650 4300 20.0 1825 1650 1200 4300 20.0 1825 14001000 1550 1400 22.0 3700 3700 1550 22.0 1200850 1275 1200 24.0 3300 3300 1275 24.0 29002900 26.0 1075 1025700 26.0 1075 1025 26002600 28.0 950 875 600 28.0 950 875 31.0 2300 2300 800 31.0 800 700 700450 34.0 1975 1975 650 34.0 600350 650 600 36.0 1775 500 550 275 36.0 1775 500 550 1575 38.0 450 400 200 1575 38.0 450 400 1425 40.0 350 300 125 40.0 350 200 300 42.0 1300 1425 250 42.0 250 150 200 1200 1300 44.0 200 44.0 200 150 1100 1200 46.0 175 46.0 175 - 1000 1100 48.0 150 1000 48.0 150 -

15˚

SIDE

30˚

FRONT

30˚

REAR

15˚

SIDE

30˚

FRONT

REAR

REDUCTION CHART FROM FROM SIDE MAIN BOOM JIB RATINGS RATINGS

CHART 140 lb N/A MAIN BLOCK REDUCTION

FROM FROM MAIN 100 lb BOOM 100 lbs JIB RATINGS RATINGS

HOOK & BALL JIB, STOWED

0 lb

N/A

JIB, DEPLOYED

450 lb

0 lb

MAIN BLOCK

HOOK & BALL

140 lb 100 lb 0 lb

1-PART

JIB, DEPLOYED 0 - 10,000 lb 450 lb

N/A

100 lbs

RIGGING CHART

JIB, STOWED

N/A 2-PART 0 - 21,0000lblb

RIGGING WIRE ROPE: 9/16 inch CHART diameter Min. breaking strength 36,750 lb 1-PART 0 - 10,000 lb

2-PART 0 - 21,000 lb

WIRE ROPE: 9/16 inch diameter Min. breaking strength 36,750 lb

F/R

360˚

MAIN BOOM

ANY ANGLE BOOM (deg)

11,500 940072 780070 65 5600 387560 287555 225050 45 1800 40 147535 120030 100025 85020 70015 60010 450 5 350 0 275 200 125 -

1) The rated loads are the maximum lifting capacities as determined by operating radius, boom extension and boom angle. The operating radius is the horizontal distance from a projection of the axis of rotation to the supporting surface, before loading to the center of vertical hoist line or tackle with load applied. 2) The rated loads shown on outriggers do not exceed 85% of actual tipping. The rated loads shown on rubber do not exceed 75% of actual tipping. Retracted outrigger rated loads meet ASME B30.5-2004. These ratings are based on freely suspended loads with the crane leveled, standing on a firm, uniform, supporting surface. Practical working loads depend on supporting surface, operating radius, and other factors affecting stability. Hazardous surroundings, climatic conditions, experience of personnel, and proper training must all be taken into account by the operator.

JIB STRUCTURAL CAPACITIES (lb) MAIN JIB STRUCTURAL CAPACITIES (lb) 18 ft JIB 12 ft JIB BOOM ANGLE 18 ft JIB 12 ft JIB 30˚ 0˚ 15˚ 30˚ 0˚ 15˚ (deg) OFFSET OFFSET OFFSET OFFSET OFFSET OFFSE

30˚ 0˚ 15˚ 30˚ 0˚ 15˚ OFFSET 3300 OFFSET OFFSET4000 OFFSET OFFSET 72 OFFSET 3500 7500 5100 750070 700065 570060 450055 350050 2800 45 2300 40 2000 1775 35 160030 1450 25 1350 20 1300 15 1275 10 1225 5 1200 0

700035004800 5100 4000 4800 5700340041003750 4100 3200 4500 3100 3500 3500 2800 350028003000 3000 2450 280025502500 2500 2300230022002150 2200 2000 1900 2000 1900 1900 1800 1700 1775 1675 1675 1600 1525 1600 1500 1500 1400 1400 1450 1400 1400 1275 13501350 - 13501175 13001300 - 13001100 - 1275 - 1050 - 1225 - 1025 - 1200 - 1000

3400 3300 3100 3100 2700 2800 2400 2550 2150 2300 1950 2000 1750 1800 1600 1600 1450 1400 1300 - 1200 - 1125 - 1100 - - - -

3750 2300 2200 3200 2000 2800 1850 2450 1700 2150 1600 1900 1500 1700 1400 1525 1350 1400 1300 127511751100105010251000-

3100 2700 2400 2150 1950 1750 1600 1450 1300 1200 1125 1100 -

4) Ratings on outriggers are for either outriggers fully extended and down or fully retracted and down. Ratings for outriggers fully retracted and down will apply for any intermediate outrigger setting. 5) Ratings on rubber depend on tire capacity, condition of tires and proper inflation pressure (125 psi). Loads on rubber may be transported at a maximum speed of 2.5 mph on a smooth, hard level surface with boom retracted to the shortest length possible and centered over front. 6) For operating radius not shown, use load rating of next larger radius. 7) The maximum combined total boom and deck load is 12,000 lb. The maximum deck load only is 14,000 lb. 8) Do not induce any external side loads to boom or jib.

3) The weights of all load handling devices such as hooks, hook blocks, slings, etc., except the hoist rope, shall be considered as part of the load. See reduction chart.

80016880CD

2300 2200 2000 1850 1700 1600 1500 1400 1350 1300 -

Symbols glossary Axles

Boom

Boom elevation

Boom extension

Boom length

Boom nose

Brakes

Cab

Counterweight

Grade

Outriggers

Drive

Heavy duty jib

Radius

Electrical system

Hoist

Rotation

Hookblock

Speed

Hydraulic system

Steering

Engine

Extension

Frame

Fuel tank capacity

Gear

Lights

Oil

Outrigger controls

Suspension

Swing

Tires

Transmission

Shuttlelift CD3300 Series

Notes

Shuttlelift CD3300 Series

Manitowoc Cranes Regional headquarters Americas Manitowoc, Wisconsin, USA Tel: +1 920 684 6621 Fax: +1 920 683 6277

Europe, Middle East, Africa Ecully, France Tel: +33 (0)4 72 18 20 20 Fax: +33 (0)4 72 18 20 00

China Shanghai, China Tel: +86 21 6457 0066 Fax: +86 21 6457 4955

Greater Asia-Pacific Singapore Tel: +65 6264 1188 Fax: +65 6862 4040

Shady Grove, Pennsylvania, USA Tel: +1 717 597 8121 Fax: +1 717 597 4062

Regional offices Americas Brazil Alphaville Mexico Monterrey Chile Santiago Europe, Middle East, Africa Czech Republic Netvorice France Baudemont Cergy Decines Germany Langenfeld Hungary Budapest Italy Lainate Netherlands Breda Poland Warsaw Portugal Baltar Russia Moscow South Africa Johannesburg U.A.E. Dubai U.K. Buckingham

ÂŠ2013 Manitowoc Form No. CD3300 Series PG Part No.08-006-.5M-0213

China Beijing Chengdu Guangzhou Xian Greater Asia-Pacific Australia Brisbane Melbourne Sydney India Chennai Delhi Hyderabad Pune Korea Seoul Philippines Makati City Singapore

Factories Brazil Passo Fundo China TaiAn Zhangjiagang France Charlieu Moulins Germany Wilhelmshaven India Pune Italy Niella Tanaro Portugal Baltar FĂ˘nzeres Slovakia Saris USA Manitowoc Port Washington Shady Grove

This document is non-contractual. Constant improvement and engineering progress make it necessary that we reserve the right to make specification, equipment, and price changes without notice. Illustrations shown may include optional equipment and accessories and may not include all standard equipment.