Regulators BC’s Gauges Hoses Cylinders Valves Bags Masks Snorkels Fins

Pony Bottle Bag

• Connects to primary diving cylinder

• Utilizes BC tank straps

• Bottom strap adds stability to bag

• Self-draining mesh bottom

• Dual straps keep the pony bottle secure

• Designed to fit aluminum cylinders

Tank Banger

• Get your buddy’s attention underwater

• Fits 6.9 to 8.0 in (175 to 203 mm) diameter cylinders

• Install around bottom of cylinder

• Color: neon green

Tank Stickers

• Durable vinyl material

• Easy to read design and layout

• Will not peel off in water with use

• Identify cylinders not being used for scuba diving purposes

• Ideal for paintball customers

Cylinder Accessories

Twin Cylinder Bands

• Precision manufactured to the exact specifications of Joe McGrath’s original Highland Millwork bands

• Deburred and polished edges to protect your cylinder paint/finish

• 18 gauge (.048 in) 304 grade stainless steel

• Band width is 2.5 in (64 mm)

• Polished fusion welds

• Polished #4 stainless steel finish

• The only choice of experienced technical divers

• Final finish completed by hand

INSTALLATION WARNING

If care is not taken during installation, you can gall (weld) a stainless steel nut onto a stainless steel bolt. You will then have to cut the bolt to remove it and replace the parts. Below are instructions to help prevent galling during installation:

1. Clean the Bolts and Nuts Start by cleaning the threads of bolts and nuts under warm running water. Scrub the threads with a toothbrush and mild detergent to break free any debris.

2. Use a Lubricant

You need to prevent the build up of heat when installing the nut to the bolt. Use a petroleum-based lubricant, like 3-In-One Oil on the threads. Apply the lubricant to the bolt threads ahead of the nut. Reapply more lubricant as needed.

3. Go Slow

Again, you need to prevent the build up of heat. Take your time. Slowly, thread the nut one full turn, then come back an 1/8 of a turn, wait and do it again. Spending an extra five minutes installing the nuts on to the bolts can prevent hours of headache hacksawing the bolts off and the expense of replacing the hardware.

REPLACEMENT BOLT KITS ARE NOT COVERED UNDER WARRANTY

BK800

2 pieces 5/16-18 x 5.5” hex head cap screws fully threaded 18-8 SS

2 pieces 5/16-18 wing nuts 18-8 SS

2 pieces 5/16-18 finish nuts 18-8 SS

2 pieces 5/16 medium split washer 18-8 SS

• TIG fusion welds

• 10 gauge (.135 in) center plates

• Center to center distance of 8.46 in / 215 mm

• Includes 18-8 stainless steel bolt kit

2 pieces 3/8 x 7/8 OD flat washer 18-8 SS

2 pieces 5/16 x 3/4 OD flat washer 18-8 SS

Stage Bottle Strap Kits

Includes:

• 2 ea. 4 in (101 mm) jumbo stainless steel bolt snaps

• 1 in (25 mm) wide, adjustable length, nylon webbing handle

• 11 in (279 mm) piece of black tubing to create a comfortable carry handle

• Rugged, elastic EPDM hose retainer with easy grip tab

• Marine grade stainless steel cylinder clamp

• Nylon tube webbing to cover cylinder clamp

• 2 in (50 mm) piece of black PVC tubing to cover the cylinder band adjustment screw

Pony Mount

The band can be rotated in the bracket so that the buckle may be positioned on the left or right side

Designed for 7.25 in (184 mm) diameter primary cylinder

HL409 - Designed for 4.4 in (112 mm) diameter pony cylinders Aluminum 8, 13, & 19 cu ft

HL412 - Designed for 3.2 in (81 mm) diameter pony cylinders Aluminum 6 cu ft

Easy Mounting of the Pony Cylinder

• Mount on the diver’s right or left side

• Mount upright or upside-down

• Secure and stable attachment

• Easy attachment with stainless steel cam buckle

• No hose clamps

• 3 sizes are available

SS Cylinder Clamps with Sleeves

• Covers most scuba cylinder diameters

• Made from 304 stainless steel

• Protector sleeves are sized for most popular cylinder diameters

Rubber bumpers to protect paint

316 grade stainless steel construction

Adjustable length nylon webbing

Roller wheels make it easier to cam over the buckle and provide protection to the cylinder paint

Stainless steel cam buckle

*NOTE: The HL412 does not have the option of rotating the band in the bracket. The buckle is in a fixed position.

Easy Attachment to the Primary Cylinder

• Uses your BC cam strap for attachment

• Designed for 7.25 in (184 mm) diameter primary cylinders

• Rubber bumpers to protect your cylinder’s paint and finish

Voyager 60 Roller Duffel

Don’t be fooled by the good looks! The Voyager 60 is, above all else, a dive bag. Divers don’t just roll on slick airport floors, we walk on docks, climb over rocks, roll through dirt. We subject our bags to salt and sand. This is exactly why you want the Voyager 60. The all-terrain wheels, coupled with backpack straps and five handles, gets your bag to your dive destination with ease. The Voyager 60 will not rust and can be hosed out after each outing.

• Clever, double-duty external cinch straps

- Travel with peace of mind knowing that external cinch straps ensure your bag won’t bust open, no matter how rough the luggage handlers get

- External cinch straps unclip, get repositioned, and become backpack straps

• All-terrain wheels take on all kinds of surfaces and can even be replaced

• Internal fin straps keep fins straight, along the bag’s sidewalls

• A large, secondary compartment keeps clothes and towels separate from your dive gear

• An accessory pocket is handy for parts, tools and small items

• Weighs 8.7 lbs (3.9 kg)

B3 Bomber Roller Duffel

It’s a Big Black Bag. It’s the B3 Bomber!

We realize that not everyone wants a fancy dive bag for exotic dive travel. Sometimes, you just want to get your gear across the parking lot. The B3 Bomber is an economy roller duffel that is up to the task.

• Large main compartment with 2 internal compression straps

• 2 large, external accessory pockets

• No inner liner for easy cleaning. Just hose it out

• Not logo’d up to draw attention to expensive scuba equipment inside

• Made from strong 1200D Magnum Coat fabric

• The trolley handle assembly is easily replaceable as it uses SS screws instead of rivets

• Weighs only 7.6 lbs (3.5 kg)!

• Main compartment capacity: 6032 cu in