01 PROJECT TYPE: PEOPLE-ORIENTED LOCATION:ANYWHERE DATE:NOVEMBER , 2021 PERSONAL PROJECT
Human built houses to shelter them from the wind and the rain so as to achieve harmony between man and nature. However, people began to violate the original intention. The design of the later generation caused the conflict between the emperor and the ordinary people. The design intent of the ancestor is to benefit all humankind and help people meet basic demands like food and clothes. However, it became the knife of the ruling class and created conflict with nature and ordinary people. Therefore, the original intention produced harm to people's lives, and this is the so-called "alienation."
When the concept of "people-oriented" is replaced by "desire-oriented" or "benefit-oriented," "alienation of design" comes into being. The inner desire makes humankind distort "human-centered" into "selfish," resulting in the conflict between "heaven and man" and "man and man" and "man and himself," and finally produces the alienation of people's minds and cultural alienation.
Under the influence of social attributes, architecture cannot ignore its natural fact because it is the first attribute of anything. We should also evaluate and consider the significance of architecture from the angle of nature. Therefore, architecture is the result of natural features and social attributes.
My models perceive people's behaviors.They respond to people's upcoming behaviors and change their form to adapt to people's behaviors. These models will help explore the concept of "humanist" and "anti-alienation."
A man was going to jump off a building
Someone broke the chair
A bunch of Slimes get together
A man is sleepy
Two sets of Slimes meet
The Slimms tried to reach the light on the floor
The other Slimes were so busy talking that they didn't notice
The Slimes were astonished to see the vandalism
Slowly divide into two parts
He lay down and fell asleep
The Slimes start talking to each other
The Slimes are going to stack the chairs up and down
The Slims were horrified to discover that someone was about to jump
Every Slim has a different reaction
Split into four groups again
The Slims find the man asleep
They got distracted by their own business after the conversation
All slimes begin to fold chairs
The Slimes hurried to stop the jumper
Some Slim ran away in fear
One person felt the noise and picked up a chair and left
Then start joking
A man began his speech
The chairs were folded and a man stepped on them with the help of the Slimes
The Slims were relieved that the jumper had been stopped
Finally, the Slimms pick up the pieces
She left
Prepare to hammer him awake
The speech brought the Slimms together again
She reached the lamp on the ceiling
The achievements of the so-called industrial civilization made human life more and more distant from nature, but it was not long before people found that the conquest and transcendence of nature were being "revenged." This is the question of what people call "alienation," and it is being raised with increasing sharpness.
MORPHOLOGICAL EVOLUTION
CALCULATION LOGIC
Area A/Approaches, the target at speed S1, slows down to speed S2 and finally meets the mark. When they meet, the speed is zero.
The number of specific sticks that satisfy the areas A approach A at a constant speed slow down when they are K away from the object, and when they make contact with the object, the speed rate is zero.
Area range (B1-B2), hit the target with speed S3 (the acceleration is A1). When the hit occurs, the target speed is not 0.
The number of specific sticks that satisfy the of areas (B1-B2) approach (B1-B2) at a constant speed,slow down when they are K away from the object,and when they contact the object,the speed rate is zero.
Area A1 approaches the target at speed S1,then slows down to speed S2 , and finally meets the target at speed 0 . Then ,Area A2 hits the target at speed S3 (the acceleration is a1) , and the target speed is not 0 when the hit occurs.
The number of specific sticks that satisfy the of areas (A1-A2) approach (A1-A2) at a constant speed,slow down when they are K away from the object,and when they contact the object , the rate is zero.
Area (B1-B2) leaves the target at speed S1 and decelerates to speed S2. When the departure occurs, the speed is not zero.
When the distance between the Area (B1-B2) and the sticks is greater than K, all the sticks are supposed to return to the original position.
Area (B1-B2) rubs or touches the target at speed S3 (the acceleration is a1). When the touch occurs, the speed is not zero.
The number of specific sticks that satisfy the of areas (B1-B2) approach (B1-B2) at a constant speed. During friction,sticks will move downside slowly and uniformly.
Area B1-B2 hits the target at speed S3 (the acceleration is a1), and the target speed is not 0 when the hit occurs.
The number of specific sticks that satisfy the of areas (B1-B2) approach (B1-B2) at a constant speed,slow down when they are K away from the object , and when they contact the object , the rate is zero .
Part of the object accelerates and then decelerates to impact the target slightly.
Area A approaches the target at speed S1, slows down to speed S2, and finally meets the mark. When they meet, the speed is zero.
The number of specific sticks that satisfy Areas A approach A at a constant speed slow down when they are K away from the object, and when they make contact with the object, the rate is zero.
Part of the object accelerates and then decelerates and hits the target hard.
Area (B1-B2) approaches the target at speed S1 , slows down to speed S2 , and finally meets the mark . When they meet , the speed is zero .
The number of specific sticks that satisfy the of Areas (B1-B2) approach (B1-B2) at a constant speed , slow down when they are K away from the object , and when they contact the object , the rate is zero .
Part of the object continues to accelerate to an impact target hard.
Area B1-B2 hits the target at speed S3 (the acceleration is a1), and the target speed is not 0 when the hit occurs.
The number of specific sticks the of Areas (B1-B2) approach (B1-B2) at a constant speed , slow down when they are K away from the object , and when they contact the object , the rate is zero .
speed
SIT
Accelerate and then decelerate to approach the target (hip)
speed
LEAN ON
Man
speed
The body first accelerates and then decelerates to meet the target. The lower part of the body meets the target, and finally, the upper part accelerates and then decelerates to meet the target. speed
COMMONS ACTIONS
speed
A part of the body accelerates into a muted impact on the target. speed
LIE DOWN
speed
speed
Part of the body accelerates and then decelerates away from the target.
APPLICATION SCENARIOS
STAND rub
MOVE
Part of the body lightly rubs or touches different parts of the target.
speed
SPECIAL CIRCUMSTANCES
FALL DOWN
rub
speed
Part of the body accelerates to hit the target hard.
PUT DOWN
THINGS
Displacement sensor
Accessory gear
THROW
FREE FALL/SMASH
Transmission gear
I try to use Arduino to simulate the movement effect of the monomer, and use the ribbon instead of the secondary gear. The ribbon can be rolled according to the sensor command, and the result is ideal.
03 INSTANTANEOUS SCENES PROJECT TYPE: DANXIA LANDFORM LOCATION:QIYUN MOUNTION,CHINA DATE:FEBRUARY , 2021 PERSONAL PROJECT
The development of the Danxia landform began with the Himalayan orogeny in the late tertiary period. This orogeny tilted and softly folded some of the red strata and uplifted the red basin, forming outflow areas.
The evolution and samsara of the Danxia landform take hundreds of millions of years to develop. The evolution of Danxia is condensed so that people are involved in the remaining space of the weathered rocks. I create a process where the greater the force of nature on the rocks, the greater the remaining space (the more functional space left for people) is reflected in the design space, where human behavior moves from walking in narrow spaces to open spaces. (Increasingly functional)
Danxia landform in its infancy
1 Person
Landform experience
2~3 Person
Reading and drinking tea
3~5 person
Tai Chi practice and teaching
5~10 person
Tai Chi practice and teaching
The water concentrated in the low-lying area in the middle of the basin and eroded along thevertical joints of the rock formation, forming a deep groove with two vertical walls, called the lane valley.
Danxia landform is in its prime With the collapse of the wall of the zanjon, the colluvial heap grows upward, covering the bedrock surface also expands. And the bedrock below the colluvial heap forms a gentle slope in the same direction as the slope of the colluvial heap.
Danxia landform develops in the old age The collapse retreat of the cliff face also causes the summit face to gradually decrease in extent, forming landforms such as fortress-like residual peaks, stone walls or stone pillars.
A space derived from the rock changes of the Danxia landform over several years as a technique.
Peneplain(Die periode) The residual peaks, stone walls, and pillars will disappear with further erosion, forming gently sloping hills.
Sunshine amount
(h)
Jan 15:100
Feb 15:100
Mar 20:100
Apr 20:100
May 20:100
Jun 30:100
Jul 55:100
Aug 65:100
Sep 40:100
Oct 30:100
Nov 20:100
Dec 10:100
Sunlight is the force, the source of energy, that causes the rock to break down into debris.
The residual peaks, stone walls, and pillars will disappear with further erosion, forming gently sloping hills.
SO2
Temperature
(℃) Maximum temperature Average temperature Minimum temperature
25 20 15 10 5 0 -5 -10 Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec
Wind speed
O2 CO2
Fe
Because the rock is a poor conductor of heat, the rock is heated by the sun during the day, only to the surface of the rock, the temperature inside the rock is constant, the outer layer of the rock becomes hot during the day and expands, at night when cold contraction, often, and the inside of the rock will be separated, so that the shell will fall off the rock, and finally become debris.
Al
Sunlight erosion and water erosion form a rich form of small grain texture.
Sun erosion, rain erosion and chemical erosion form honeycombed caves.
(m/s) The shear force and impact force generated by wind on the surface of the earth will cause the separation of small soil particles from larger aggregates or soil blocks, and even peel debris from the rock surface, causing scratches and honeycombs on the rock surface, and then soil particles or sand particles will be carried by wind to form wind-blown sand flow.
8 7 6 5 4 3 2 1
SO2
O2 CO2
Fe Al
Rain erosion, crustal movement and chemical erosion form irregular oval void texture
Rain erosion and wind erosion form water erosion gullies
Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec
Amount of preclpitation (mm) 700 600 500 400 300 200 100 0 Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec
Rain erosion is a common geographical phenomenon in nature. This erosion can cause soil, soil or other ground components to be damaged and denuded. Rain erosion is a form of hydraulic erosion, including surface erosion and gully erosion. One of the most important types of soil erosion is rain erosion.
Sunlight erosion and crustal movement form fault mountain texture
Sun erosion and wind erosion form weathered gullies
If people are involved in the spatial changes of Danxia landform, we will get more enlightenment about the space. From formation to death, the space of Danxia landform is constantly changing. When people participate in spatial change, they will also get different spatial states and functions.
The building is divided into sections from different angles to fully show my research Danxia landform, not only its shape, but also its changes in the evolution process of thousands of years. Due to long-term erosion, Danxia landform will experience different development stages.
Floor plan
Underground plan N
0
5
10
15
N
25
0
5
10
15
MASTER PLAN
25
FUTURE VISION
N
0
5
10
15
25
ACTIVITY TIMETABLE
05 LIFESTYLE WRITTEN IN WATER PROJECT TYPE: EPIPHYLLUM LOCATION:CONSTRUCTION SITE DATE:OCTOBER , 2020 PERSONAL PROJECT
MEXICO Mexico's adoption of a six-day workweek, working from Monday to Saturday, has long provided competitive labor costs, which have remained relatively low, while the quality and complexity of products made there has increased.
00:00 01:00 02:00 03:00 04:00 05:00
GUATEMALA
06:00
Guatemala's economy is predominantly agricultural, with a weak industrial base and a long period of economic stagnation caused by a long civil war, with half of the country's workforce employed in agriculture.
07:00 08:00 09:00 10:00 11:00 12:00
14:00
HONDURAS
N
13:00
As one of the least developed countries in Latin America, the average wage of the leading industry of the national economy is not high, and the poor population accounts for 32% of the national population. Most people can only pay cheap rent every month, and several members of a family live in a shabby house in the suburbs, struggling to get by.
1
15:00 2
3 4
16:00
6
17:00
5 5
18:00 18:00
Taking the opening and closing of Epiphyllum as the basic form of space, this paper discusses a kind of life style of anti-industrialization of people in space.
NICARAGUA
19:00
Agriculture mainly produces cotton, coffee, sugar cane, bananas and meat. Agriculture accounts for one quarter of GDP and two thirds of exports. Half of the workforce is agricultural workers.
20:00 21:00 22:00 23:00
21℃~24℃ 16℃~18℃
1
Mexico
4
Nicaragua
10℃~12℃
2
Guatemala
5
Surinam
3
Honduras
6
Costa Rica
≥5℃
00:00
MORPHOGENESIS Primitive form
VIEW
Linear generalized
Abatract to refine
Proportion of generalization
Relationships
B
A
Primitive form
Linear generalized
Profile cutting
Proportion of generalization
Relationships
Colors
Top
B
R G B
255 255 255
255 255 214
245 255 197
251 222 257
215 17 95 Close
C
R G B
255 255 255
255 255 214
245 255 197
251 222 257
R G B
255 255 255
255 255 220
250 255 211
238 255 192
215 17 95
B
C
A:B:C≈2.7:4.1:2.5 B A
C
A
R G B
255 255 255
255 255 214
255 228 115
255 154 85
234 52 21
R G B
255 255 255
255 255 214
250 255 211
255 230 95
255 23 95
R G B
255 255 255
255 247 176
255 217 139
A:B:C≈2.4:3.5:3.6 B C A A:B:C≈3.6:2.4:0.8
10
2
8
12
2
8
HUMIDNESS
4
Half-open
Open
Close
Half-open
Open
Close
Half-open
Entirety
10
Once every 3-4 days
12
21℃~24℃
2
4
10
16℃~18℃
15.5~20％
TEMPERATURE
Close
Third
B
10
Open
Second
A:B:C≈1.3:3.8:2.2 C
12
Half-open
First
A:B:C≈4.3:5.1:2.2 A
Perspective
Right
Centre
C
A:B:C≈2.7:5:3.6 A
Front
4
8
SEASON
FERTILIZATION
12
2
8
4
10℃~12℃
As for the experiment on the relationship between epiphyllum and temperature , it is found in the research that most epiphyllum is rarely open in the daytime , and the opening time is generally from 9 pm to 4 am.
-6
6
-4
-8 -2
-12
-10
Epiphyllum soil moisture content should not be too dry or too wet , the soil moisture content in 15％~20％ is appropriate , spring and summer should be timely replenishmenr , autumn and winter to reduce watering.
-6 Once or twice a week
6
-4
-8 -2
-12
Once or twice a week
-10
Epiphyllum on the temperature requirements than the origin of autumn winter have different appropriate temperature.
6
-6
≥5℃
21℃~24℃ 16℃~18℃
-4
-8 -2
-12
-10
-6
6
-4
-8 -2
10℃~12℃
Keep the soil not tpp dry
Leaf epiphyllum soil requirements should be rich in humus , drainage performance is good , loose and fertile micro acidic sandy soil , otherwise easy to retting. Fertilizing is advisable in spring and autumn.
≥5℃
-12
-10
Open
MATERIALS
The shell material of the center ball: polycarbonate Closed
Semi-open
Open
1.Lightweight 2.Transmittance 3.Sound insulation performance 4.Heat transfer 5.Impact resistance 6.Anti-condensation 7.Flame retardant, fire prevention 8.Chemical resistance 9.Cold bending installation, heat, and cold resistance 10.Co-extruded UV layer absorbs 98% of harmful ultraviolet rays. 11.Excellent in electrical insulation, molding, and hot working.
The frame of layers 1, 2, and 3: Package Board Package Board is a prefabricated module board building system that integrates thermal insulation, equipment, interior, exterior finishes, and doors and windows. Panels are attached with integrated locks. Thus, it can be easily installed by a couple of unskilled people with just a hex wrench. Unlike shipping containers, Package Board allows living spaces to be added without the help of heavy machinery and does not restrict their layouts to the shape of a box.
The membrane of the layer 1 and 2: sandblasting resin Sandblasting resin appears translucent. Which not only isolates the real world but also brings soft light. As the medium of emotional expression in this space, the material seems objective and secondary.
The membrane of layer 3: Vinyl film This newly made composite panel is capable of acting as protection from the rain and can also function as a shading device, producing a wide range of colorful effects and reflections as a result of its optical properties. Furthermore, the film can filter 97% of the sun's UV radiation, perfecting it for the summer.mer.
