Zen Rooms Kitchen Storage by Kree8

ZEN ROOMS INTERIORS FOR INNER PEACE

KITCHEN STORAGE FITTINGS AND ACCESSORIES

Recorner maxx速 - working parts are virtually unseen, shown on pages 22-23

Swing out pantry unit with white Premea bases and Glassline inserts, shown on pages 8-9

HSA power move速 for use with Vauth-Sagel larder units, shown on pages 4-7

Contents Premea glassline . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-3

HSA pull out larder units . . . . . . . . . . . . . . . . . . . . . .4-5

Power move® electric motor . . . . . . . . . . . . . . . . . . . . .6

HSA rotary larder units . . . . . . . . . . . . . . . . . . . . . . .6-7

DUSA® swing out pantry units . . . . . . . . . . . . . . . . .8-9

Base liner pull out system . . . . . . . . . . . . . . . . . . .10-11

Wari corner® swing out corner storage units . . . . .12-13

DSA pull out storage - frames and baskets . . . . .14-17

Pull out storage sets . . . . . . . . . . . . . . . . . . . . . . .18-19

Rotary 45º angled storage units . . . . . . . . . . . . . . . . .20

Pull out storage baskets . . . . . . . . . . . . . . . . . . . . . . .21

Recorner maxx® pole-free shelving units . . . . . . . .22-23

Twin corner pull out shelving units . . . . . . . . . . . .24-25

Slide corner shelving units . . . . . . . . . . . . . . . . . . . . .26

Swing out waste bins . . . . . . . . . . . . . . . . . . . . . . . . .27

Oeko liner pull out waste bins . . . . . . . . . . . . . . . . . .28

Oeko flexliner system for drawer boxes . . . . . . . . . . .29

Premea Glassline The new Premea Glassline basket follows the current trend towards glass and gives you the opportunity to create your own individual kitchen furniture design. • The new range of Premea Glassline baskets are available for the complete range of Vauth-Sagel fittings • The glass side panels are easy to change without any tools

Clear glass

• Decor panels are available in clear or frosted glass as standard or create your own for a very individual kitchen furniture design Note: Glassline glass side panels are optional and must always be ordered separately if required.

Frosted glass

DUSA®

HSA

The proven classic DUSA® tall larder unit guarantees a high degree of convenience and functionality. Its high safety standards and harmonious design make it an element that you do not want to be without in any state-of-the-art kitchen.

The HSA pull out larder unit has an elegant and uniform design and allows full access to the contents of every basket. Pages 4-5

Baskets can be individually positioned at the required height in both the cabinet frame and on the door frame. Pages 8-9

Premea Glassline

Recorner maxx速

DSA

This pole-free corner cabinet solution provides a distinctly greater amount of storage space with no space limiting central column, allowing optimum use of storage space. Pages 22-23

The DSA side pull-out is the proven solution for base cabinets. This popular classic has additional front stabilization and an adjustment device for wide fronts and all angles. Pages 14-17

Wari corner速 This clever storage unit is designed so that the rear baskets automatically follow the front baskets when the door is opened and pulled away from the cabinet, making all baskets easily accessible when the unit is fully opened. Pages 12-13

HSA Pull Out Larder Units HSA pull out larder units Larder unit pulls out allowing full access to the contents of every basket. Integrated soft close system ensures quiet, smooth closing of the pull out. Choice of wire baskets, linear or mesh, or white Premea solid based baskets. Baskets are included with larder unit sets. Additional single baskets are available for installed height of 2150-2330 mm. Optional Glassline glass side insert sets can be ordered separately for Premea style baskets. Cabinets are not included.

250 350 450 550

430

250 350 450 550

430

81 250 350 450 550

428

sof t g

lo i n s

Power move速 The power move速 electric motor for use with larder units shown on pages 4-7 is shown in detail on page 6.

Power move速 makes the pull-out larder units even smoother and more simple to operate.

Baskets are included with larder unit sets, glass sides optional

Fixings included

HSA Pull Out Larder Units Single additional basket set • Four basket widths to suit cabinet widths 300, 400, 500 or 600 mm • Available in 3 styles; mesh chrome wire, linear chrome wire or white Premea solid base • Additional single baskets can be added for installed height of 21502330 mm up to a total of 7 baskets • 2x Grey plastic basket hanging clips for 1 basket included Single basket set For cabinet width 300 mm 400 mm Basket width 250 mm 350 mm Mesh wire storage baskets 1 basket set 547.25.351 547.25.350 Linear wire storage baskets 1 basket set 547.25.361 547.25.360 Solid base Premea storage baskets 1 basket set 547.25.681 547.25.680

HSA larder unit complete set, centre mounting, height adjustable, full extension • For installed heights: 950-1200 mm: 4x baskets included 1200-1450 mm, 1450-1700 mm: 4x baskets included 1700-1950 mm, 1900-2150 mm, 2140-2330 mm: 5x baskets included (single baskets can be ordered in addition separately) • Built-in depth 470 mm • For cabinet widths 300, 400, 500 or 600 mm Set includes: 1x Frame set 1x Runner set 1x Basket set

600 mm 550 mm

547.25.353 547.25.354 547.25.363 547.25.364 547.25.683 547.25.684

Order qty: 1 set 16 49

Glassline insert set • Glass side panels (400 x 38.5 x 5 mm) and clips in quantities suitable for 1, 4 or 5 basket sets (2 sides and 4 clips per basket) • For use with solid base Premea baskets only • Panels slot into fixing clips, fixing clips clip onto basket front/rear

For cabinet width 300 mm 400 mm 500 mm 600 mm Basket width 250 mm 350 mm 450 mm 550 mm Installed height (mm) Larder unit with mesh wire storage baskets 950-1200 547.20.501 547.20.511 547.20.521 547.20.531 1200-1450 547.20.502 547.20.512 547.20.522 547.20.532 1450-1700 547.20.503 547.20.513 547.20.523 547.20.533 1700-1950 547.20.504 547.20.514 547.20.524 547.20.534 1900-2150 547.20.505 547.20.515 547.20.525 547.20.535 2140-2330 547.20.506 547.20.516 547.20.526 547.20.536 Installed height (mm) Larder unit with linear wire storage baskets 950-1200 547.20.541 547.20.551 547.20.561 547.20.571 1200-1450 547.20.542 547.20.552 547.20.562 547.20.572 1450-1700 547.20.543 547.20.553 547.20.563 547.20.573 1700-1950 547.20.544 547.20.554 547.20.564 547.20.574 1900-2150 547.20.545 547.20.555 547.20.565 547.20.575 Installed height (mm) Larder unit with solid base Premea baskets 950-1200 547.20.601 547.20.611 547.20.621 547.20.631 1200-1450 547.20.602 547.20.612 547.20.622 547.20.632 1450-1700 547.20.603 547.20.613 547.20.623 547.20.633 1700-1950 547.20.604 547.20.614 547.20.624 547.20.634 1900-2150 547.20.605 547.20.615 547.20.625 547.20.635 Order qty: 1 set

Linear wire baskets

500 mm 450 mm

Glass sides insert set for use with solid base Premea baskets For use with Clear glass Frosted glass 1 basket set 547.24.441 547.24.541 4 basket set 547.24.444 547.24.544 5 basket set 547.24.445 547.24.545 Order qty: 1 set 16

Additional plastic clip set

20 49

• 1 set includes 2 pairs of clips, suitable to fit 2 glass sides to 1 Premea basket Finish Polished chrome Order qty: 1 set (1 set = 2 pairs)

Cat. No. 547.24.252

Additional plastic clip, other colours • Handed; order 1 left and 1 right for each glass side Finish Grey Black White Order qty: 1 pc

Left hand 547.24.651 547.24.351 547.24.751

Right hand 547.24.650 547.24.350 547.24.750

Baskets with Premea base, polished chrome fixing clips and glass sides

Mesh wire baskets

HSA Rotary Larder Units, Power Move® Electric Motor HSA rotary larder units rotate through 90° in either direction, allowing full access to the contents of every basket. A safety mechanism locks the runner when the unit rotates, to prevent the unit from closing until the frame is moved back in-line. Integrated damping ensures quiet, smooth closing of the pull out. Choice of wire baskets, linear or mesh, or white Premea solid based baskets. Baskets are included with larder unit sets. Optional Glassline glass side insert sets can be ordered separately for Premea style baskets. Cabinets are not included.

Power move® electric motor • For use with larder units shown on pages 4-7 • Order adaptor separately when used with rotary larder units shown on page 7 • Can be retro-fitted • Fixings included • Drive control is dependent on load and will adjust itself automatically • By lightly pulling or pressing the cabinet front the electric motor is triggered to open the larder unit • Rubber minimises the amount of noise transmitted to the cabinet • Safety stop: Pull out movement is stopped if larder unit touches person or object in the way • If power fails, the larder unit can be used like a normal pull-out unit • Grey plastic Power move® Adaptor for rotary larder units

Chrome mesh baskets - rotary larder unit with chrome plated steel mesh baskets.

Order qty: 1 pc

Cat. No. 547.21.090 547.22.090

HSA Rotary Larder Units HSA rotary larder unit complete set, centre mounting, height adjustable, full extension, with storage baskets

16 49

• For installed heights: 1790-2040 or 1990-2230 mm • Built-in depth 500 mm • For cabinet width 300 or 400 mm Set includes: 1x Rotary frame set: Hanging frame, silver epoxy coated tubular steel, height adjustable Door panel mounting bars; 2x bars, silver epoxy coated steel Fixing screws and fitting instructions 1x Runner set: Top and bottom runners, zinc-plated steel, full extension, ball cage top runner with damper and self closing bottom roller runner with damper, max. load carrying capacity 80 kg per unit Fixing screws and fitting instructions 1x Basket set: 5 mesh, linear or Premea solid base baskets Grey plastic basket hanging clips Door panel mounting plates; steel, 3 way adjustable Adjustable plinth foot, for screw fixing, for plinth height 150 mm. Included in 400 width set only

Glassline insert set • Glass side panels (400 x 38.5 x 5 mm) and clips in quantities suitable for 5 basket set (2 sides and 4 clips per basket) • For use with solid base Premea baskets only • Panels slot into fixing clips, fixing clips clip onto basket front/rear Glass sides insert set for use with solid base Premea baskets For use with Clear glass Frosted glass 5 basket set 547.24.445 547.24.545 Order qty: 1 set 16

Additional plastic clip set

• 1 set includes 2 pairs of clips, suitable to fit 2 glass sides to 1 Premea basket

For cabinet width 300 mm 400 mm Basket width 250 mm 350 mm Installed height Larder unit with mesh wire storage baskets 1790-2040 mm 547.22.904 547.22.924 1990-2230 mm 547.22.905 547.22.925 Installed height Larder unit with linear wire storage baskets 1790-2040 mm 547.22.504 547.22.524 1990-2230 mm 547.22.505 547.22.525 Installed height Larder unit with solid base Premea baskets 1790-2040 mm 547.22.804 547.22.824 1990-2230 mm 547.22.805 547.22.825

Finish Polished chrome Order qty: 1 set (1 set = 2 pairs)

Cat. No. 547.24.252

Additional plastic clip, other colours • Handed; order 1 left and 1 right for each glass side Finish Grey Black White Order qty: 1 pc

Order qty: 1 set

so f t

Fixings included

Cabinet is not included

300/400

Min. 500 0 16 -19 Max. 70

Min. 630

Min. 350

Right hand 547.24.650 547.24.350 547.24.750

lo i n s

Left hand 547.24.651 547.24.351 547.24.751

DUSA速 Swing Out Pantry Units DUSA速 swing out pantry units For 500 mm cabinet widths, this pull out pantry unit includes baskets for both door frame and main pull out. The pantry unit is easy to use; the baskets are pulled out of the cabinet at the same time as the door is opened. Baskets can be individually positioned at the required height in both the cabinet frame and on the door frame. Symmetrical height alignment of both cabinet and door baskets is possible, if required. Two integrated dampers ensures quiet, smooth closing of the pull out. Pantry units are supplied complete with choice of baskets included: Baskets are available in chrome wire mesh, linear wire or with white Premea solid base. Optional Glassline glass side insert sets can be ordered separately for Premea style baskets. Cabinet is not included.

Baskets can be individually positioned at the required height in both the cabinet frame and on the door frame.

Symmetrical height alignment of both cabinet and door baskets is possible, if required.

Swing out pantry unit with Premea solid base storage baskets and glass sides

Swing out pantry unit with mesh wire storage baskets

DUSA® Swing Out Pantry Units DUSA® swing out pantry unit complete set

Closed

Open

• For installed heights: 950-1200 mm: 3x Each basket (door and main) included 1200-1450, 1450-1700 mm: 4x Each basket (door and main) included 1700-1950, 1900-2150 mm: 5x Each basket (door and main) included 2150-2350 mm: 7x Each basket (door and main) included • Built-in depth 480 mm • For cabinet width 500 mm Standard door version; baskets 400 mm wide 110

365

350 mm baskets included in door frame version sets

DUSA® swing out pantry unit complete set, centre and door mounting, height adjustable, full extension

400

Set includes: • Hanging frame; silver epoxy coated tubular steel, height adjustable • Door mounting frame; silver epoxy coated steel with zinc-plated steel hinge support arms • Top and bottom runners; full extension, ball cage top runner with damper and self closing bottom roller runner with damper, max. load carrying capacity 80 kg per unit • Storage baskets for main frame; chrome-plated steel, available in 3 styles; mesh chrome wire, linear chrome wire or solid base • Storage baskets for door frame, available in 3 styles; mesh chrome wire, linear chrome wire or solid base • Basket hanging and securing clips; grey plastic • Door frame support hinges; grey plastic • Door panel mounting bars; silver epoxy coated tubular steel • Door frame fixing arm; grey plastic, adjustable • Fitting instructions

305

75 365 110

400

305

369 84

For cabinet width 500 mm Basket width 400 mm Installed height Pantry unit with mesh wire storage baskets 950-1200 mm 547.27.211 1200-1450 mm 547.27.212 1450-1700 mm 547.27.213 1700-1950 mm 547.27.214 1900-2150 mm 547.27.215 2150-2350 mm 547.27.216 Pantry unit with linear wire storage baskets 1900-2150 mm 547.27.245 Pantry unit with solid base Premea storage baskets 1700-1950 mm 547.27.714 1900-2150 mm 547.27.715 Order qty: 1 set

84 400

305

16 49

Glassline insert set • Set includes: 5x Glass side panels for main frame baskets (372 x 38.5 x 5 mm) 5x Glass side panels for door frame baskets (233 x 38.5 x 5 mm) 20x Plastic clips (2 clips for each basket to secure glass side panel) • Suitable for use with pantry sets 547.27.714 and 542.27.715 only • Panels slot into fixing clips, fixing clips clip onto basket front/rear Glass sides insert set for use with solid base Premea baskets Finish Clear glass Frosted glass Polished chrome clips 547.30.499 547.30.599

Premea solid base storage baskets with glass sides

Order qty: 1 set

Base Liner Pull Out System

Base liner The flexible storage system for base cabinets. Bottom basket and side baskets are ordered separately to suit your own requirements. The front attachment for the hanging frame is height adjustable which means that either two or three basket levels are possible - single bottom basket and then either one or two pairs of side baskets to go above the base basket. For use with standard 450, 500 or 600 door fronts as well as framed door fronts. A bottle rack is also available, which can be purchased as an option instead of a side basket.

max. 40 kg

Optional bottle rack also available

Base Liner Pull Out System Order frame and basket sets separately

428

400/450/550

81 428

400/450/550

Base liner bottom storage basket set • • • •

Unhanded Height x depth: 81 x 428 mm Set includes 1x storage basket and 2x grey plastic securing clips Polished chrome-plated steel baskets, available as mesh or with white Premea base • Glass insert sides are available for Premea basket only - see below • Note: Pull out frame must be ordered separately

470 Min.

16-19 450/500/600

so f t

Base liner pull out frame

For cabinet widths 450/500/600 mm

Unhanded, for use with baskets shown lo i n s Installed height: 587-800 mm Built-in depth: Min. 470 mm For cabinet width 450/500/600 mm Set includes 1x Base mounted frame; silver epoxy coated steel 2x Door panel hanging plates; silver epoxy coated steel 1x Pair ball bearing runners; galvanized steel with integrated soft close damper Fixing materials and fitting instructions c

• • • • •

For cabinet width Basket width Mesh chrome Chrome/Premea Order qty: 1 set

Fixings included

450 mm 400 mm 548.06.331 548.06.731

500 mm 450 mm 548.06.332 548.06.732

600 mm 550 mm 548.06.333 548.06.733

75 455

455

Cat. No. 548.06.204

Base liner side storage basket set

Order qty: 1 set

• • • •

Unhanded Height x depth: 75 x 455 mm Set includes 1x storage basket and 2x grey plastic securing clips Polished chrome-plated steel baskets, available as mesh or with white Premea base • Glass insert sides are available for Premea basket only - see below • Note: Pull out frame must be ordered separately For cabinet width Basket width Mesh chrome Chrome/Premea Order qty: 1 set

450 mm 187 mm 548.06.341 548.06.741

500 mm 212 mm 548.06.342 548.06.742

600 mm 262 mm 548.06.343 548.06.743

16 49

For 450 mm cabinet width Holds 2 bottles

For 500 mm cabinet width Holds 3 bottles

For 600 mm cabinet width Holds 4 bottles

Glassline insert set • Glass side panels (400/422 x 38.5 x 5 mm) and polished chrome plastic clips in quantities suitable for: Bottom basket set - 2 sides and 4 clips per basket Side basket set - 1 side and 2 clips per basket • For use with Base liner solid base Premea baskets only • Panels slot into fixing clips, fixing clips clip onto basket front/rear

Base liner bottle rack (optional) • • • •

Unhanded, alternative option to side basket Height x depth: 79 x 455 mm Set includes 1x rack and 2x grey plastic securing clips Polished chrome-plated steel For cabinet width Rack width For Cat. No.

450 mm 162 mm 2 bottles 548.06.221

500 mm 212 mm 3 bottles 548.06.222

Fixings included

600 mm 262 mm 4 bottles 548.06.223

Glass sides insert For use with Bottom basket set Side basket set

Order qty: 1 set

set for use with solid base Premea baskets Glass width Clear glass Frosted glass 400 mm 547.24.441 547.24.541 422 mm 548.06.490 548.06.590

Wari Corner速 Swing Out Corner Storage Units This clever storage unit is designed so that the rear baskets automatically follow the front baskets when the door is opened and pulled away from the cabinet. Door front fixing with integrated 3D adjustment and central height alignment allows the swing out corner storage unit to be fitted perfectly. Upon opening, the front baskets automatically swing away leaving free access to the back basket, making all baskets easily accessible when the unit is fully opened.

Automatic pull-out action - rear baskets automatically follow front baskets when the door is pulled away from the cabinet.

Integrated damping ensures quiet, smooth closing of the pull out.

Right hand shown.

Optional Glassline glass side insert sets can be ordered separately for Premea style baskets.

Choice of baskets:

White premea base with glass side inserts

Mesh wire baskets

Automatic pull out action Right hand version shown

Wari Corner® Swing Out Corner Storage Units Wari corner® swing out corner storage unit complete set, automatic pull out action • Installed height: 530 mm • Built-in depth: 485 mm • For minimum cabinet width 800 or 900 mm, 900 mm version can also be used in 1000 or 1200 mm cabinets Set includes: 1x Frame set: Rear hanging frame and base mounting track; silver epoxy coated tubular steel Door frame with pivot; silver epoxy coated tubular steel Back frame; silver epoxy coated tubular steel Door frame follower; fiber glass improved plastic Door panel hanging plates; silver coloured steel, 3 way adjustable, 800 mm version to suit 400 mm door widths 900 mm version to suit 450, 500 and 600 mm door widths Fixing screws and fitting instructions 1x Basket set: 2x Storage baskets (rear); chrome-plated, available in 3 styles; mesh chrome wire, linear chrome wire or Premea white solid base, max. load carrying capacity 9.5 kg 2x Storage baskets (door); chrome-plated, available in 3 styles; mesh chrome wire, linear chrome wire or Premea white solid base, max. load carrying capacity 8 kg 800 mm version* Basket style Left hand Mesh wire, chrome-plated 548.17.225 Linear wire, chrome-plated 548.17.205 Solid base, white Premea, chrome 548.17.265 900 mm version (also for 1000 and 1200 mm) Basket style Left hand Mesh wire, chrome-plated 548.17.235 Linear wire, chrome-plated 548.17.215 Solid base, white Premea, chrome 548.17.275

Right hand version shown above Right hand 548.17.224 548.17.204 548.17.264

16 49

Right hand 548.17.234 548.17.214 548.17.274

Glassline insert set • Set includes: 2x Glass side panels for cabinet baskets 300*/400 x 38.5 x 5 mm 2x Glass side panels for front baskets 420 x 38.5 x 5 mm 8x Clips for side panels, polished chrome plastic • Suitable for 1 unit • For use with solid base Premea baskets only • Panels slot into fixing clips, fixing clips clip onto basket front/rear

Order qty: 1 set Rear hanging frame and door frame - left hand version shown

Glass sides insert set for use with solid base Premea baskets For use with Clear glass Frosted glass 800 mm version 548.19.468 548.19.568 900 mm version 548.19.469 548.19.569

sof t g

lo i n s

Order qty: 1 set Fixings included

Choice of baskets included with sets

76 430/330*

450

430/330*

76 450

Finish Polished chrome Order qty: 1 set (1 set = 2 pairs)

Mesh chrome wire baskets

305/230*

370

450

Cat. No. 547.24.252

• Handed; order 1 left and 1 right for each glass side

305/230*

76 430/330*

Additional plastic clip, other colours

Linear chrome wire baskets

Finish Grey Black White Order qty: 1 pc

370

• 1 set includes 2 pairs of clips, suitable to fit 2 glass sides

370

Additional plastic clip set

Solid base baskets, white Premea

305/230*

Left hand 547.24.651 547.24.351 547.24.751

Right hand 547.24.650 547.24.350 547.24.750

DSA Pull Out Storage - Frame and Baskets

494

closed

450

open 962

472 450 450

so f t

Pull out storage unit frame

Finish Silver epoxy coated

Fixings included

Unhanded, for use with baskets shown lo i n s Integrated soft close damper Installed height: 600 mm Built-in depth: See baskets, for cabinet width 150/300 mm Steel c

• • • • •

Cat. No. 546.39.996

Order qty: 1 set

Pull out storage unit frame must be ordered separately shown above

75 470 470

Storage basket set, 82 mm width

Fixings included

• Unhanded • Built-in depth: 495 mm • Set includes 2x storage baskets, 4x clips and 2x door hanging plates • Polished chrome-plated steel baskets, zinc-plated steel basket securing clips and door hanging plates • Note: Pull out frame must be ordered separately

150 mm cabinets - order frame and 82 mm basket set separately

Basket style Mesh chrome wire basket set White Premea base basket set

DSA

Cat. No. 546.39.380 546.39.330

Order qty: 1 set

The DSA side pull-out is the proven solution for base cabinets. This popular classic has additional front stabilization and an adjustment device for wide fronts and all angles.

16 49

Frame has integrated soft close damper. Order frame and baskets separately. Optional Glassline glass side insert sets can be ordered separately for Premea style baskets.

Glassline insert set • Glass side panels (442 x 38.5 x 5 mm) and clips in quantities suitable for 90º 82 and 230 mm basket sets, i.e. 2 side panels and 4 clips (1 side and 2 clips per basket) • For use with 90º solid base Premea baskets only Panels slot into fixing clips, fixing clips clip onto basket front/rear Glass sides insert set for use with solid base Premea baskets For use with Clear glass Frosted glass 90º 82/230 mm basket sets 546.40.480 546.40.580 Order qty: 1 set (= 2 side panels and 4 clips)

DSA Pull Out Storage - Frame and Baskets

- order frame and basket with oven tray holder set separately

- order frame and basket/towel holder set separately

Pull out storage unit frame must be ordered separately refer to page 14

28 28

420 88

Storage basket and oven tray holder set, 82 mm width

470

105

82 • Unhanded • Built-in depth: 495 mm • Set includes 1x storage basket, 1x oven tray holder, 4x clips and 2x door hanging plates • Polished chrome-plated steel basket and towel rail, zincplated steel basket securing clips and door hanging plates • Note: Pull out frame must be ordered separately

Mesh chrome wire set Unhanded

Storage basket and towel holder set, 82 mm width

105 • Left or right handed 82 • Built-in depth: 495 mm • Set includes 1x storage basket, 1x towel rail, 4x clips and 2x door hanging plates • Polished chrome-plated steel basket and towel rail, zinc-plated steel basket securing clips and door hanging plates • Note: Pull out frame must be ordered separately

470

Fixings included

Cat. No. 546.39.440

Mesh chrome wire set Cat. No. Order qty: 1 set

Order qty: 1 set

Left hand 546.39.350

470

Fixings included

Right hand 546.39.340

DSA Pull Out Storage - Frame and Baskets

300 mm cabinet - order frame, 230 mm basket set and optional glass sides separately

Pull out storage unit frame must be ordered separately refer to page 14 80 80 230

470 470

16 49

230

Storage basket set, 230 mm width

Fixings included

• Unhanded • Built-in depth: 495 mm • Set includes 2x storage baskets, 4x securing clips and 2x door hanging plates • Polished chrome-plated steel baskets, zinc-plated steel securing clips and door hanging plates • Note: Pull out frame must be ordered separately Basket style Mesh chrome wire basket set White Premea base basket set

Glassline insert set • Glass side panels (442 x 38.5 x 5 mm) and clips in quantities suitable for 90º 82 and 230 mm basket sets, i.e. 2 side panels and 4 clips (1 side and 2 clips per basket) • For use with 90º solid base Premea baskets only • Panels slot into fixing clips, fixing clips clip onto basket front/rear Glass sides insert set for use with solid base Premea baskets For use with Clear glass Frosted glass 90º 82/230 mm basket sets 546.40.480 546.40.580

Cat. No. 546.39.243 546.39.233

Order qty: 1 set (= 2 side panels and 4 clips)

Order qty: 1 set

DSA Pull Out Storage - Frame and Baskets

Angled 300 mm cabinet - order frame and angled basket set separately

Pull out storage unit frame must be ordered separately refer to page 14

80 84

230

450 Right hand 45º version shown

450 230

30/35º or 45º basket set, 230 mm width

Handed Fixings included

Glass side width without clips: 282 mm for 30/35º baskets 214 mm for 45º baskets

• Left or right handed • Built-in depth: 510 mm for 30/35º, 520 mm for 45º baskets • Set includes 2x storage baskets, 4x securing clips and 2x door hanging plates • Polished chrome-plated steel baskets, zinc-plated steel securing clips and door hanging plates • Note: Pull out frame must be ordered separately Basket angle 30/35º Mesh chrome wire basket set Left hand 546.39.053 Right hand 546.39.043 White Premea base basket set Left hand 546.39.033 Right hand 546.39.023

16 49

Glassline insert set • Glass side panels (282/214 x 38.5 x 5 mm) and clips in quantities suitable for 30/35º or 45º 230 mm basket sets, i.e. 2 side panels and 4 clips (1 side and 2 clips per basket) • For use with angled solid base Premea baskets only • Panels slot into fixing clips, fixing clips clip onto basket front/rear

45º 546.39.153

Glass sides insert set for use with solid base Premea baskets For use with Glass width Clear glass Frosted glass 30/35º basket sets 282 mm 546.40.490 546.40.590 45º basket sets 214 mm 546.40.491 546.40.591

546.39.143 546.39.133 546.39.123

Order qty: 1 set (= 2 side panels and 4 clips)

Order qty: 1 set

Pull Out Storage Sets

150 mm cabinet - basket, oven tray holder and runners all included in the set, for installation on right hand side only, as shown

Pull out storage sets

90˚ Storage basket and oven tray holder set, 100 mm width

Storage basket with towel holder Two tier storage basket set Sets include soft closing runners and storage fittings.

For cabinet width 150 mm Order qty: 1 set

so f t lo i n s

• Handed - right handed only, as per photograph shown • Installed height: 600 mm • Built-in depth: 500 mm Set includes: • Storage basket; 1x basket, heavier gauge chrome-plated steel with solid base • Oven tray holder; 1x holder, heavier gauge chrome-plated steel • Ball bearing runners; 1x pair of runners, galvanized steel, full extension, self closing including 2 dampers • Basket securing clips; 4x clips, zincplated steel • Door hanging plates; 2x plates, zincplated steel

Storage basket with oven tray holder

Three options available for 150 mm cabinets:

Cat. No. 545.12.282

4.0

Pull Out Storage Sets

- basket, towel holder and runners

- two tier basket set and runners

90˚ Storage basket and towel holder set, 100 mm width

so f t g

lo i n s

4.0

Cat. No. 545.12.252

For cabinet width 150 mm

Order qty: 1 set

sof t lo i n s

• Handed - right handed only, as per photograph shown • Installed height: 600 mm • Built-in depth: 500 mm Set includes: • Storage baskets; 2x baskets, heavier gauge chrome-plated steel with solid base • Ball bearing runners; 1x pair of runners, galvanized steel, full extension, self closing including 2 dampers • Basket securing clips; 4x clips, zincplated steel • Door hanging plates; 2x plates, zincplated steel

For cabinet width 150 mm

90˚ Storage baskets set, 100 mm width

• Handed - right handed only, as per photograph shown • Installed height: 600 mm • Built-in depth: 500 mm Set includes: • Storage basket; 1x basket, heavier gauge chrome-plated steel with solid base • Towel holder; 1x 2-rail holder, heavier gauge chrome-plated steel • Ball bearing runners; 1x pair of runners, galvanized steel, full extension, self closing including 2 dampers • Basket securing clips; 4x clips, zincplated steel • Door hanging plates; 2x plates, zincplated steel

Cat. No. 545.12.272

4.0

Rotary 45º Angled Storage Units

Angled 300 mm cabinet - 45º angled storage unit, right hand version shown

Rotary angled storage units Designed to suit the increasing popular chisel fronted cabinets. The baskets pull out from the unit and rotate, so that the entire contents of the baskets are easily accessible.

Rotary, 45° angled storage unit with chrome wire mesh baskets • For 45° angled cabinets • For installed height 630 mm • Built-in depth 500 mm • For minimum cabinet width 300 mm Set includes: • Hanging frame; silver epoxy coated steel, max. load carrying capacity 16 kg per unit • Storage baskets; 3x chrome-plated steel, mesh chrome wire, 210 x 450 mm • Fixing clips; silver epoxy coated steel • Fitting instructions

45°

Fixings included

For cabinet width 300 mm Order qty: 1 set

Note: Diagram and photos show right hand version.

Left hand 546.37.551

Handed L

Right hand 546.37.541

Pull Out Storage Baskets

For 500 or 600 mm cabinet widths - set includes one storage basket and one pair soft closing runners

Pull out storage baskets Storage basket sets for hinged door cabinets or cabinets with door fronts. Sets include 1 basket and 1 pair of runners, for either 500 or 600 mm cabinet widths. Pull out storage set with chrome wire mesh baskets

185

160

462-468 562-568

487

462-468 562-568

For cabinet width For hinged door cabinets For door front fixing cabinets Door front fixing brackets (1 pair)

487

Order door front fixing brackets separately

Order qty: 1 set

sof t lo i n s

For door front fixing cabinets

For hinged door cabinets

• To suit 500 or 600 mm cabinet widths with 15/16 or 18/19 mm board thickness • Minimum internal depth: 515 mm • Comprises: 1x Storage basket, chrome-plated steel, mesh chrome wire, max. load carrying capacity 20 kg per basket • 1x Pair ball bearing runners, galvanized steel, full extension, self closing • Fitting instructions

Fixings included

500 mm 600 mm 548.01.214 548.01.216 548.01.204 548.01.206 548.01.999

Recorner maxx® Pole-free Shelving Units

Photograph above shows 3 sets of Recorner maxx® installed

Recorner maxx® with polished chrome rail

Recorner maxx® This pole-free corner cabinet solution provides a distinctly greater amount of storage space with no space limiting central column, giving optimum use of storage space for bulky accessories such as bowls, trays and pans.

Recorner maxx® pole-free shelving unit

Shelves are side mounted to carcase walls using an ingenious pole-free system.

835

900

• • • • •

Ø 760

900

• • •

Ø 760

• Min. 500

Max. 350 900

Suitable for 900 mm corner base cabinets Built-in depth: 500 mm Unhanded 27.5 kg carrying capacity per shelf Designed with no central column to give greatest amount of storage space and with adjustable shelf heights to suit different cabinet heights Can be retro-fitted into existing cabinets Shelves rotate independently of each other 2x: Set includes 2x 3/4 or 2x 4/4 white wood round shelves with polished chrome rail, lower shelf central bearing, upper shelf diagonal strut and fitting instructions Fixing screws not included, order Cat. No. 015.71.839 separately For 900 mm cabinet width Three quarter carousel unit Full circle carousel unit

Min. 500 540-570 900

Order qty: 1 set (1 set = 2 shelves and fittings)

Cat. No. 542.62.712 542.62.722

Recorner maxx® Pole-free Shelving Units

Recorner maxx® with plexiglass sides

Recorner maxx® pole-free shelving unit with plexiglass sides • • • • •

• • •

•

Suitable for 900 mm corner base cabinets Built-in depth: 500 mm Unhanded 27.5 kg carrying capacity per shelf Designed with no central column to give greatest amount of storage space and with adjustable shelf heights to suit different cabinet heights Can be retro-fitted into existing cabinets Shelves rotate independently of each other 2x: Set includes 2x 3/4 or 2x 4/4 white wood round shelves with polished chrome edging and plexiglass inserts, lower shelf central bearing, upper shelf diagonal strut and fitting instructions Fixing screws not included, order Cat. No. 015.71.839 separately For 900 mm cabinet width Three quarter carousel unit Full circle carousel unit

Cat. No. 542.62.742 542.62.752

Order qty: 1 set (1 set = 2 shelves and fittings)

Twin Corner Pull Out Shelving Units

Twin corner pull out shelving unit with railing, right hand version

Twin corner pull out shelving unit Twin corner includes 2 shelves and all fittings for installation in 900 or 1000 mm plus corner cabinets with 450 or 500 mm doors. Designed so that the pull out section automatically begins to pivot as the unit is pulled out of the cabinet. Slide corner shelving unit shown on page 26 has the same pull-out pivot action, but has the additional feature of shelves which can be pulled out independently of one another.

Shelves pull out together

Built-in depth 490 mm

For door width 450/500/600 mm

Note: Diagram and photos show right hand version.

Fixings included

Twin Corner Pull Out Shelving Units

Twin corner pull out shelving unit without railing, right hand version

Twin corner pull out shelving unit without railing • Set includes 2x laminated wooden shelves, with a white base and polished chrome edge, pull out and pivoting mechanism and fitting instructions For cabinet width 900 mm 1000 mm

Twin corner pull out shelving unit with railing • • • •

Suitable for 900, 1000 or min. 1000 mm corner base cabinets Built-in depth: 490 mm Left or right handed Designed so that the pull out section automatically begins to pivot as the unit is pulled out of the cabinet • Shelves pull out together • Set includes 2x laminated wooden shelves, with a white base and polished chrome rail, pull out and pivoting mechanism and fitting instructions For cabinet width 900 mm 1000 mm Min. 1000 mm

For door width 450 mm 500 mm 600 mm

Left hand 542.08.246 542.08.251 542.08.261

For door width 450 mm 500 mm

Left hand 542.08.846 542.08.851

Right hand 542.08.845 542.08.850

Order qty: 1 set

Twin corner pull out shelving unit with plexiglass sides • Set includes 2x laminated wooden shelves, with a white base and polished chrome edging and plexiglass inserts, pull out and pivoting mechanism and fitting instructions

Right hand 542.08.245 542.08.250 542.08.260

For cabinet width 1000 mm

Order qty: 1 set

For door width 500 mm

Left hand 542.08.351

Right hand 542.08.350

Slide Corner Pull Out Shelving Units

Slide corner pull out shelving unit with chrome rail, right hand version

Slide corner shelving unit

Slide corner pull out shelving unit

• • • •

Slide corner includes two shelves and all fittings for installation in corner cabinets. Shelves do not obstruct adjacent cabinet when pulled out and pull out independently of each other.

Please note: 92º cabinet hinges must be used, as door needs to open a minimum of 92º to allow the unit to pull out. Wide corner post must also be fitted, if D handles or similar protruding handles are used on the unit doors.

Suitable for 900, 1000 or min. 1000 mm corner base cabinets Built-in depth: 490 mm Left or right handed Designed so that the pull-out section automatically begins to pivot as the unit is pulled out of the cabinet • Shelves pull out independently of one another • Set includes 2x laminated wooden shelves, with a white base and polished chrome rail, slide and pivoting mechanism and fitting instructions For cabinet width 900 mm 1000 mm Min. 1000 mm

For door width Left hand 450 mm 542.07.746 500 mm 542.07.751 600 mm 542.07.761

Right hand 542.07.745 542.07.750 542.07.760

Slide corner shelving unit with plexiglass sides Built-in depth 490 mm Right handed version

• Set includes 2x laminated wooden shelves, with a white base and polished chrome edging and plexiglass inserts, slide and pivoting mechanism and fitting instructions

min. 92° For door width 450/500/600 mm

Fixings included

Note: Diagram and photos show right hand version

For cabinet width 900 mm 1000 mm Min. 1000 mm Order qty: 1 pc

For door width Left hand 450 mm 542.07.346 500 mm 542.07.351 600 mm 542.07.361

Right hand 542.07.345 542.07.350 542.07.360

Swing Out Waste Bins

Swing out waste bin with one 12 litre and three 9 litre bins

Swing out waste bin • For hinged door cabinets, for side wall and base mounting to cabinets, by means of a side fixing bracket and base mounting weight bearing pivot • Designed to be withdrawn from the cabinet whilst the lid remains inside • Can be mounted left or right handed • Installed height x width x depth: 525 x 460 x 460 mm • Silver epoxy coated steel wire frame housing and light grey plastic mounting components and lid included • Light grey plastic bins with yellow, light grey and blue coloured handles • Total capacity: 40 litres

Swing out waste bin • For hinged door cabinets, for side wall and base mounting to cabinets, by means of a side fixing bracket and base mounting weight bearing pivot • Designed to be withdrawn from the cabinet whilst the lid remains inside • Can be mounted left or right handed • Installed height x width x depth: 525 x 460 x 460 mm • Silver epoxy coated steel wire frame housing and light grey plastic mounting components and lid included • Light grey plastic bins with yellow, light grey, blue and green coloured handles • Total capacity: 39 litres For cabinet width Min. 500 mm

Bins included 1x 12, 3x 9 litre bins

500

Fixings included

Cat. No. 502.79.504

For cabinet width Min. 500 mm

Order qty: 1 pc

500

Fixings included

Bins included Cat. No. 1x 19, 1x 12, 1x 9 litre bins 502.79.503

Oeko Liner Pull Out Waste Bins

Photo shows 600 mm wide cabinet with two 10 litre bins and one 22 litre bin - information available on request.

400 width 470 depth

450 width 470 depth

Oeko liner pull-out waste bin

For cabinet width

Installed height

Bins included:

400 450 500 600

370 470 470 470

2x 2x 1x 2x

mm mm mm mm

450

400

1 x 10 1 x 10 litres litres

500

1 x 21 litres

600

so f t

500 width 470 depth

Fixings included

600 width 470 depth

lo i n s

• For door front fixing cabinets, for side wall mounting to cabinets • Designed to be withdrawn from the cabinet whilst the lid remains inside for use as shelf • Installed height: See table below Installed depth: 470 mm • Silver epoxy coated steel side panels, lid, frame housing and mounting components and grey plastic bins • Total capacity: 20, 42, 49 and 56 litres

Cat. No.

10 litre bins 503.04.503 21 litre bins 503.04.514 21, 1x 28 litre bins 503.04.515 28 litre bins 503.04.517

1 x 21 litres

Order qty: 1 pc

1 x 28 litres

Oeko Flexliner System for Drawer Boxes

Photo shows 600 mm wide cabinet with 2x 10 litre bins and 1x 28 litre bin - information available on request. Drawer box and runner not included.

Oeko flexliner system • For base mounting in standard drawer boxes or on pull out shelf • System consists of a bin frame, bin sizes to suit and a lid shelf • Frames sizes for cabinet widths 500, 600 and 800 mm • Installed height: 466 mm • Waste bins are made of high quality plastic with an extra smooth surface and are therefore easy to clean • Lid offers additional storage space above the bins • Bin frames and lid shelf are made of double powder coated metal with protective enamel, grey finish, bins are light grey plastic • Total capacity: 49, 56 or 77 litres • Other frame sizes are available for cabinet widths from 400 to 900 mm with bin capacities varying from 10 to 28 litres - information on request For drawer width 500 mm 600 mm 800 mm

Bins included 2x 21 litre bins 2x 28 litre bins 2x 28, 1x 21litre bins

500 width 500 depth

1 x 21 litres

500

600 width 500 depth

1 x 21 litres

1 x 28 litres

600

800 800 width 500 depth

Fixings included

1 x 28 litres

Cat. No. 503.16.502 503.16.503 503.16.504

Order qty: 1 set

1 x 28 litres

1 x 21 litres

1 x 28 litres

Waste Bins Euro-Cargo-S and CargoSoft G Waste Bins

1 Euro-Cargo-S single waste bin

For cabinet width 300 mm

Bin included 1x 30 litre bin

300

so f t

o n tr

Fixings included

• For door front fixing cabinets, for side wall mounting in cabinets • Designed to be withdrawn from the cabinet whilst the lid remains inside for use as shelf • With ‘soft control’; self-closing and dampening mechanism on runners • Installed height x depth: 427 x 403 mm • For cabinet board thickness 16-19 mm with 3 mm adjustability either side • Silver epoxy coated steel bin holder, mounting components, runners and lid and light grey plastic bin • Total capacity: 30 litres

Cat. No. 502.73.940

Order qty: 1 pc

Euro-Cargo-S waste bin • For door front fixing cabinets, for side wall mounting in cabinets • Designed to be withdrawn from the cabinet whilst the lid remains inside for use as shelf • With ‘Smooth Tec’; self-closing and dampening mechanism on covered runners • Installed height x depth: Catalogue shows...‘403 mm’ 427 x 449 mm Correct installed depth is 449 mm • For cabinet board thickness 16-19 mm with 3 mm adjustability either side • Silver epoxy coated steel bin holder, mounting components, Grass runners and Smooth Tec lid and light grey plastic bins • Total capacity: 38, 49 or 60 litres For cabinet width 450 mm 500 mm 600 mm

Bins included 2x 19 litre bins 1x 30, 1x 19 litre bins 2x 30 litre bins

450

500

600

Fixings included

Cat. No. 502.73.901 502.73.904 502.73.902

Order qty: 1 pc

CargoSoft G waste bin • For door front fixing cabinets, for side wall mounting in cabinets • Designed to be withdrawn from the cabinet whilst the lid remains inside for use as shelf • With ‘Smooth Tec’; self-closing and dampening mechanism on covered runners • Installed height x depth: Catalogue shows...‘403 mm’ 387 x 449 mm Correct installed depth is 449 mm • For cabinet board thickness 16-19 mm with 3 mm adjustability either side • Silver epoxy coated steel bin holder, mounting components, Grass runners and Smooth lid and light grey plastic bins Tec • Total capacity: 25 litres For cabinet width 300 mm

Bins included 1x 15, 1x 10 litre bins

300

Fixings included

Cat. No. 502.73.961

Order qty: 1 pc

14.11.11/2*

Drawer Inserts Cuisio Cutlery Inserts

Cuisio cutlery tray set Insert layout varies with size

• 423 mm deep, to suit 450 mm deep DWD and similar drawer boxes as well as Blum TANDEMBOX • For 15/16 and 18/19 mm board thickness (variable soft edges) • 58 mm height • Insert layout varies with size • Plastic insert, aluminium trim with frosted insert, stainless steel trim with graphite insert

Width

423

Knife block

Width/For cabinet width Frosted green Frosted white 219 mm/300 mm 556.24.021 556.24.621 319 mm/400 mm 556.24.031 556.24.631 419 mm/500 mm 556.24.001 556.24.601 519 mm/600 mm 556.24.011 556.24.611 719 mm/800 mm 556.24.051 556.24.651 919 mm/1000 mm 556.24.081 556.24.681

• Holds 3 knives • Height x depth x width: 44 x 53 x 93 mm • For use only with 100 mm wide sections of drawer insert, to be placed underneath the aluminium trims • Light grey plastic

Graphite 556.24.221 556.24.231 556.24.201 556.24.211 556.24.251 556.24.281

For section width 100 mm

Cat. No. 556.24.503

Order qty: 1 set

Knife block • Holds 4 knives • Height x depth x width: 44 x 53 x 143 mm • For use only with 150 mm wide sections of drawer insert, to be placed underneath the aluminium trims • Light grey plastic For section width 150 mm

Cat. No. 556.24.504

Order qty: 1 set

Cuisio cutlery tray set • 473 mm deep, to suit 500 mm deep DWDXP and similar drawer boxes as well as Blum TANDEMBOX • For 15/16 and 18/19 mm board thickness (variable soft edges) • 58 mm height • Insert layout varies with size • Plastic insert, aluminium trim with frosted insert, stainless steel trim with graphite insert

Insert layout varies with size Width

473

End piece

Width/For cabinet width Frosted green Frosted white Graphite 219 mm/300 mm 556.90.030 556.90.730 558.90.330 319 mm/400 mm 556.90.031 556.90.731 558.90.331 419 mm/500 mm 556.90.033 556.90.733 558.90.333 519 mm/600 mm 719 mm/800 mm 919 mm/1000 mm

556.90.034 556.90.035 556.90.037

556.90.734 556.90.735 556.90.737

• For use on the side of the drawer inserts, when drawer is wider than cutlery insert and only 1 insert is required • End piece must be used on the right hand side of the drawer insert

558.90.334 558.90.335 558.90.337

For inserts: 423 mm deep 473 mm deep

Order qty: 1 set

Order qty: 1 pc

Frosted green Frosted white Graphite 556.24.071 556.24.671 556.90.390 556.24.073 556.24.673 556.90.391

Drawer Inserts CuisioFLEX Drawer Inserts

CuisioFLEX drawer insert set • Set of two or three expandable plastic frames, with non-slip feet • 236-386 mm deep/wide, for use in all popular drawer sizes and styles • Set of 3 suitable for min. 800 mm drawer widths • Corners in aluminium-grey, middle sections in frosted green or white Aluminium-grey corners frosted green Set of 2 556.81.502 Set of 3 556.81.503

236 - 386

129 25

Mid sections frosted white frosted graphite 556.81.572 556.81.532 556.81.573 556.81.533

Order qty: 1 set

CuisioFLEX drawer inserts CuisioFLEX drawer insert set For organising plates, dishes, pots, pans, packets, jars and other kitchen items. Telescopic design makes these inserts exceptionally flexible and can be used in all popular drawer sizes and styles.

• Set of two or three expandable plastic frames, with non-slip feet • 236-386 mm deep/wide, for use in all popular drawer sizes and styles • Set of 3 suitable for min. 800 mm drawer widths • Corners in white, middle sections in frosted white White corners Set of 2 Set of 3 Order qty: 1 set

236 - 386

129 25

Frosted white mid sections 556.81.772 556.81.773

Pull Out Fittings Built-in and Wall Mounting Ironing Boards Dimensions required for flush fitting worktop D 20 mm 30 mm 40 mm 50 mm E 86 mm 76 mm 66 mm 66 mm 25 - 50 mm D E max 19 mm

32 mm

416 mm 37 mm

A Ironfix built-in ironing board • For installation in the drawer space of most standard base cabinets • When the drawer is opened the supports automatically extend • Hinging front section permits trousers and shirts to be pulled easily over the board • Internal cabinet width required; 362 - 500 mm • Cabinet depth required; minimum 500 mm • Complete set comprises; 2 cabinet rails 1 collapsible ironing board support system with pre-assembled 2-part extending runners 1 folding ironing board 1 ironing board cover fixing materials operating and mounting instructions • White (RAL 9016) plastic-coated steel ironing board and sleeve arm • White and grey striped cotton cover with a foam lining and an elastic gathering to ensure a good fit • If required please order sleeve arm separately • Replacement covers are available

Internal installation width 362 - 500 mm

950

Internal cabinet depth 500 mm

300

Item Cat. No. Ironfix built-in ironing board 568.60.710 Replacement cover for ironing board 568.60.907 Sleeve arm 568.61.700 Replacement cover for sleeve arm 568.60.916 Order qty: 1 pc

B Ironfix wall mounting ironing board • • • •

• •

Available with or without covering hood With turning mechanism; swivel range 180° Can be locked in left, right or inclined position Complete set comprises; 1 wall mounting bracket 1 folding support 1 folding ironing board 1 ironing board cover fixing materials operating and mounting instructions White (RAL 9016) plastic-coated steel ironing board White and grey striped cotton cover with a foam lining and an elastic gathering to ensure a good fit White (RAL 9016) polystyrene covering hood Replacement covers are available

595

365

326

140 Covering hood

525

950

300

185

985

Type Cat. No. Ironing board without hood 568.66.700 Ironing board with hood 568.66.710 Replacement cover for ironing board 568.60.907 Order qty: 1 pc

•

We reserve the right to alter specifications without notice.

07.03.11/1

Dimensions in mm

Drawer Inserts Deep Drawer Inserts

234

140

Depth 423

150

170 175 15

Expanding deep drawer kitchen insert set • For 600-1200 mm drawer widths - for drawer widths wider than 600 mm there will be spaces left in between the inserts for storage of e.g. tins, packets. • Two versions available: For 450 or 500 mm deep drawers • Set comprises: 1x Centre drawer box, divided into four sections 2x Storage jar holders 6x Storage jars, for insertion in holders, clear acrylic with beech lids • Clear lacquered solid beech drawer box and jar holders 420 deep, to suit 450 mm deep drawer Insert width/To fit drawer width 474 mm/600-1200 mm

Cat. No. 556.98.360

470 mm deep, to suit 500 mm deep drawer Insert width/To fit drawer width 474 mm/600-1200 mm

Cat.No. 556.98.361

Order qty: 1 set

Width

Plate stack drawer insert • For drawer widths 600, 800, 900, 1000 and 1200 mm • With either 9x, 10x or 15x Ø 25 mm pegs included • 423 mm deep insert with 50 mm deep strip, to suit either 450 mm or 500 mm deep drawer. Discard strip for 450 mm deep drawer • Clear lacquered european oak or light beech plywood To suit 450 mm and 500 mm deep drawer Insert width To fit drawer width European oak 493 mm 600 mm (9 pegs) 556.98.492 693 mm 800 mm (9 pegs) 556.98.493 793 mm 900 mm (9 pegs) 556.98.494 893 mm 1000 mm (10 pegs) 556.98.495 1093 mm 1200 mm (15 pegs) 556.98.496

Light beech 556.98.392 556.98.393 556.98.394 556.98.395 556.98.396

Spare peg set (6 pegs per set) Cat. No.

Light beech 556.98.390

Order qty: 1 set

European oak 556.98.490

Drawer Inserts Utensil Holder Drawer Inserts

Insert 556.96.357 shown in photo above

405

505 50

Utensil holder drawer insert • For 500 mm drawer width • 423 mm depth, to suit 450 mm deep drawer • To suit 500 mm deep drawer order 50 mm back block separately • 10 accessories included, as shown, stainless steel with black rubber grip, dishwasher proof • Rustic beech, clear lacquered To fit drawer depth/ Order 450 mm/ Insert, 423 mm 500 mm/ Insert and Back block

Utensil holder drawer insert

Back block 405

423

Insert 26

Cat. No. 556.96.355 + + 556.96.355 and 556.96.396 +

Order qty: 1 pc

• For 600 mm drawer width • 423 mm depth, to suit 450 mm deep drawer • To suit 500 mm deep drawer order 50 mm back block separately • 12 acessories included, as shown, stainless steel with black rubber grip, dishwasher proof • Rustic beech, clear lacquered To fit drawer depth/ Order 450 mm/ Insert, 423 mm 500 mm/ Insert and Back block Order qty: 1 pc

Back block 505

423

Insert 26

Cat. No.

+ 556.96.357 + 556.96.357 and 556.96.397 +

Drawer Inserts Anthracite Plastic Cutlery Inserts Anthracite plastic and beech cutlery inserts

For drawer width 500 mm *Not for use with beech and plastic inserts below

For drawer width 400 mm *Not for use with beech and plastic inserts below

Anthracite cutlery inserts with optional beech or anthracite plastic holders and trays.

301/314

For drawer width 600 mm

501/514

401/414

423

Cutlery insert, anthracite plastic

To suit Grass DWD drawer boxes Width / For cabinet width 423 mm depth 301 mm / 400 mm 556.41.303 401 mm / 500 mm 556.41.305 501 mm / 600 mm 556.41.307 701 mm / 800 mm 556.41.308 801 mm / 900 mm 556.41.309 901 mm / 1000 mm 556.41.310 To suit Blum drawer boxes Width / For cabinet width 423 mm depth 314 mm / 400 mm 556.41.343 414 mm / 500 mm 556.41.345 514 mm / 600 mm 556.41.347 714 mm / 800 mm 556.41.348 814 mm / 900 mm 556.41.349 914 mm / 1000 mm 556.41.350

473

• 55 mm height • For cabinets widths 400-1000 mm with 18/19 mm board thickness • Six widths available, to suit either Grass DWD drawer boxes or Blum drawer boxes • Two depths available, 423 mm to suit 450 mm or 473 mm to suit 500 mm deep drawer boxes • 2 x sealing strips included • Anthracite plastic inserts • Grey profile sealing strips are included

For drawer width 800 mm

For drawer width 900 mm

701/714

801/814

423

473 mm depth 556.41.323 556.41.325 556.41.327 556.41.328 556.41.329 556.41.330

423

473

For drawer width 1000 mm 901/914

473 mm depth 556.41.363 556.41.365 556.41.367 556.41.368 556.41.369 556.41.370

423

473

Order qty: 1 set

Decorative and sealing profile

3.6

• Lengths included with inserts, but available separately in 1.0 m roll if required • Grey plastic Length Cat. No.

55 4 5

*Please note: 1.0 m 556.39.599

Beech and plastic spice jar and knife block inserts, are not suitable for use in inserts for 400 mm or 500 mm cabinet widths.

Order qty: 1 set

125

128 128

358

348

355

118

418

430

428

118

118 118

125

418

Spice jar and knife block inserts • Lacquered beech or anthracite plastic For drawer depth 450 mm 500 mm

Beech spice jar insert 556.39.240 556.39.250

Beech knife block insert 556.39.261 556.39.271

Order qty: 1 pc

Plastic spice jar insert 556.39.341 556.39.351

Plastic knife block insert 556.39.360 556.39.370

New Premea Glassline range now available Frosted or clear glass side panels as standard

ZEN ROOMS INTERIORS FOR INNER PEACE

www.zen-rooms.com info@zen-rooms.com

0844 772 6767