PSP
Electro-permanent magnetic chuck ol-Magnete
ratp Kraftvolle Quad
速
PSP-02-EN
PSP-A
Limited offer choose from our
PSP-B
6
PROMOTIONAL SIZES
These six promotional kits come as a complete solution for the handling and clamping of various sized and shaped parts for nearly all machining processes at a great price. Magnetically clamped parts allow for safer and faster machining in an easy and energy saving fashion.
10 Reasons “WHY BRISC magnetic work holding?�
PSP-C
1 Brisc creates a constant unchanging force 2 5 sided access to the part in a single set-up 3 The ability to drill through without damage to the magnet surface
using optional pole extensions 4 No moving parts to wear out in the magnet itself 5 The vibration reduction associated with clamping the entire part
surface instead of just a few small areas as with mechanical clamping methods
PSP-D
6 The automatic shimming optional set-up will give improved
production immediately 7 3 seconds to clamp even the largest parts accurately and easily 8 With the electro-permanent design the electrical power is only
PSP-E
required for just a few seconds to activate and deactivate the magnet. This means loss of power does not change the holding force 9 The electro-permanent design eliminates residual magnetism and
allows up to 130 metric tons of force / SQ meter 10
With the square pole design the magnetic field is just 25 mm from the surface keeping the chips from sticking to the part
With mild steel part 25 mm thick 305 mm X 305 mm and 102 mm face mill .
PSP-F
6 mm deep max feedrate is 381 mm per minute with 2X safety factor and no stops. With stops 1.5m per minute can be reached.
+
optional extension parts
ELECTROPERMANENTMAGNETISCH ELECTRO-PERMANENT MAGNETIC PSP-A
■ ■ ■ ■
Pole number : 20 Net weight : 50 kgs Control unit : CUA Clamping force : 70 kN
55
CONTROL
MILLING
PSP-B
■ ■ ■ ■
Pole number : 30 Net weight : 72 kgs Control unit : CUA Clamping force : 100 kN
55
CONTROL
MILLING
■ ■ ■ ■
PSP-C
Pole number : 40 Net weight : 95 kgs Control unit : CUA Clamping force : 140 kN
55
CONTROL
MILLING
• Elektropermanent-Magnetspannplatte mit Quadratpolteilung mit Standarddichte Anwendung: Zum Aufspannen für schwere Bearbeitung von mittelgroßen Werkstücken
Merkmale:
Polabmessung 50x50mm Haftkraft > 350 kg pro Pol keine Verformung durch Elektro-Permanent-Technologie minimale mechanische Verformung durch massive Monoblockkonstruktion Spannungsfreies Aufspannen mit beweglichen Polverlängerungen, kein Restmagnetismus, kontrollierter Magnetfluss verhindert Magnetisierung des Werkzeugs Werkstücke größer als der Magnettisch bearbeitbar
• square pole electro-permanent magnetic chuck with standard density Use:
clamping for heavy machining of medium size workpiece
Features:
square pole size 50x50 mm magnetic force higher than 350kg per pole electro-permanent technology with no deformation owing to the rise of the temperature minimum mechanical deformation with solid one-piece housing distortion free clamping with auto-shim pole extensions, no residual magnetism, controlled flux prevents magnetization of the tool workpiece larger than the table size are machinable
ELECTROPERMANENTMAGNETISCH ELECTRO-PERMANENT MAGNETIC PSP-D
■ ■ ■ ■
Pole number : 32 Net weight : 172 kgs Control unit : CUA Clamping force : 221 kN
59
CONTROL
MILLING
PSP-E
■ ■ ■ ■
Pole number : 40 Net weight : 213 kgs Control unit : CUD Clamping force : 276 kN
59
CONTROL
MILLING
PSP-F
■ ■ ■ ■
Pole number : 50 Net weight : 261 kgs Control unit : CUD Clamping force : 345 kN
59
CONTROL
MILLING
• Elektropermanent-Magnetspannplatte mit Quadratpolteilung mit Standarddichte Anwendung: Zum Aufspannen für schwere Bearbeitung von mittelgroßen Werkstücken
Merkmale:
Polabmessung 70x70mm Haftkraft > 690 kg pro Pol keine Verformung durch Elektro-Permanent-Technologie minimale mechanische Verformung durch massive Monoblockkonstruktion Spannungsfreies Aufspannen mit beweglichen Polverlängerungen, kein Restmagnetismus, kontrollierter Magnetfluss verhindert Magnetisierung des Werkzeugs Werkstücke größer als der Magnettisch bearbeitbar
• square pole electro-permanent magnetic chuck with standard density Use:
clamping for heavy machining of medium size workpiece
Features:
square pole size 70x70 mm magnetic force higher than 690kg per pole electro-permanent technology with no deformation owing to the rise of the temperature minimum mechanical deformation with solid one-piece housing distortion free clamping with auto-shim pole extensions, no residual magnetism, controlled flux prevents magnetization of the tool workpiece larger than the table size are machinable
POLVERLĂ„NGERUNGS- SET POLE-EXTENTION SETS AUTO-SHIM POLE EXTENSION SET
Juego de Polos extensores FIX POLE EXTENSION SETfijos EW - 5020
EX - 5020
ES - 5052
EV - 5020 ET - 5052
52mm
20mm
Modell Abmessung Model Size
EV-5020
EW-5020
EX-5020
Modell Abmessung Model Size
ES-5052
ET-5052
FPS
PSP-A
8 pcs
1 pcs
1 pcs
MPE
PSP-A
3 pcs
17 pcs
FPS
PSP-B
13 pcs
1 pcs
1 pcs
MPE
PSP-B
3 pcs
27 pcs
FPS
PSP-C
18 pcs
1 pcs
1 pcs
MPE
PSP-C
3 pcs
37 pcs
Juego de Polos extensores FIX POLE EXTENSION SETfijos
AUTO-SHIM POLE EXTENSION SET EW - 7020
EX - 7020
ET - 7070
EV - 7020 ES - 7070 70mm
20mm
Modell Abmessung Model Size
EV-7020
EW-7020
EX-7020
Modell Abmessung Model Size
ES-7070
ET-7070
FPS
PSP-D
14 pcs
1 pcs
1 pcs
MPE
PSP-D
3 pcs
29 pcs
FPS
PSP-E
18 pcs
1 pcs
1 pcs
MPE
PSP-E
3 pcs
37 pcs
FPS
PSP-F
23 pcs
1 pcs
1 pcs
MPE
PSP-F
3 pcs
47 pcs
Because of the built in threaded pin, the ES fix pole extension and ET mobile pole extension can be fixed onto the chuck quickly with simple rotations, no need any tools, saving a lot of time for deploying the pole extensions.
The ET mobile pole extension can increase up to 20% the magnetic clamping force comparing the conventional mobile pole extension and the vertical adjustment is up to 6 mm.
STEUEREINHEIT CONTROL UNIT CUA (one coil, one channel) / CUD (two coils, one channel) The maximum pole numbers one channel can drive
RMC-3-PCB
Pole size
QCT-3FP QCT-3FS(CUA) QCT-4FS(CUD)
Voltage
CCW 1/2 -325(CUA) CCW 1/2 -425(CUD)
MPH 1/2
50 x 50 mm
70 x 70 mm
CUA
CUD
CUA
CUD
220VAC
56
112
36
72
400VAC
84
168
42
84
QCT-3MS
Sizes
QCS-4MS(CUA) QCS-5MS(CUD)
CBL-325
QCT-3MP(CUA) QCT-4MP(CUD)
JMT-2
Length
Width
Height
Weight
325 (12.80)
170 (6.69)
90 (3.54)
3.4 kg/7.5 lbs unit: mm(in)
CUA
CUD-PCB
CUD
RMC-3-PCB
CUA-PCB
electro board of RMC-3
electro board of CUA
electro board of CUD
QCT-3FP
QCT-3FS
QCT-4FS
thread power cable connector box end
thread control cable connector box end
CUA
QCT-3MS
QCT-3MP
thread power cable connector cable end
thread control cable connector cable end
CUA
JMT-2
QCS-4MS
adaptor for metal protection hose
quick control cable connector cable end
CB-1
QCS-4FP
Connection box Ф26 mm
quick connector chuck end
CUA
CUA
MPH 1/2
CCW 1/2 -325
5 meters metal protection hose
5 meters cable with metal protection hose
CUA
CUD
thread control cable connector box end
QCT-4MP
CUD
thread control cable connector cable end
QCS-5MS
CUD
quick control cable connector cable end
QCS-5FP
CUD
quick connector chuck end
CCW 1/2 -425
CUD
5 meters cable with metal protection hose
MPH 1/2-MT 1 meter metal protection hose
CUD
CBL-325
CBL-425
5 meters power/control cable 3 x 2.5
5 meters control cable 4x2.5
CBL-325-MT
CBL-425-MT
1 meter power/control cable 3 x 2.5
1 meter control cable 4x2.5
CUD
STEUEREINHEIT CONTROL UNIT CUE (multi-coils, multi-channels)
Use: electro-permanent magnetics modules Features: selftesting and magnetizing detection PLC connection built in with channel selection function can be used jointly
Sizes Length
Width
383 (15.08) 289 (11.38)
Height
Weight
129 (5.08)
8 kg/17.6 lbs unit: mm(in)
The maximum pole numbers one channel can drive Pole size Voltage
CUT
CUF
CUE
CUS
50x50 mm
70x70 mm
50x50 mm
70x70 mm
50x50 mm
70x70 mm
50x50 mm
70x70 mm
220VAC
56 x 2
36 x 2
56 x 4
36 x 4
56 x 6
36 x 6
56 x 8
36 x 8
400VAC
84 x 2
42 x 2
84 x 4
42 x 4
84 x 6
42 x 6
84 x 8
42 x 8
JB-1 (Four channels junction box)
JB-2 (Eight channels junction box)
Use: Fast connections between chucks and control unit Features: die cast aluminium box IP65 water resistant 7 pins quick connector makes connection and disconnection much easier
Use: Fast connections between chucks and control unit Features: die cast aluminium box IP65 water resistant 7 pins quick connector makes connection and disconnection much easier
Sizes
Sizes
Length
Width
Height
Weight
Length
Width
Height
Weight
200 (7.87)
160 (6.30)
100 (3.94)
2.3 kg/5.1 lbs
280 (11.02)
230 (9.06)
110 (4.33)
4.5 kg/9.9 lbs
unit: mm(in) CONTROL UNIT
JUNCTION BOX
unit: mm(in)
Tel.: 01 896 2280 Fax: 01 896 2282 zibtr@siol.net www.zibtr.com