LED Drivers from ZMDI
Enabling Energy Efficient LED Lighting Solutions
ZLED7000, 7x20, 7x30
ZLED7001, ZSLS7031
ZLED7015, ZSLS7025
Features
Features
Features
• Capable of up to 98% efficiency • Operates with a wide input range up to 40 VDC • Integrated 40V power switch • One pin on/off or brightness control via PWM, DC voltage control signal input or toggle switch • Switching frequency: 1MHz • Dimming rate: 1200:1 (typical) • Output current accuracy: 3% (typical) • Built-in thermal shutdown and open-circuit protection for LED • Very few external components needed for operation • Broad range of applications: outputs up to 1.2A
• Universal LED Drivers: Isolated and Non-Isolated Line Power Drivers • Operates with a wide range of AC input supplies including (but not limited to) 85-265VAC • High power factor (> 0.95) to meet Energy Star (ZSLS7031) • Temperature compensation, diagnostic functions for safety and to protect LED • PWM and linear dimming • Very few external components needed for operation • Broad range of applications: outputs greater than 1A and ZSLS7031 and ZLED7001 cover Buck, Buck-Boost and Flyback topologies
• Boost (Step-Up) LED Driver • Internal (ZLED7015) and external (ZSLS7025) power switch • Operates with a wide input voltage range 5-100V • One pin on/off or brightness control via PWM, DC voltage control signal input. • Small Package footprint • Dimming rate: 1200:1 (typical) • High Efficiency • Built-in soft-start, thermal shutdown and open-circuit protection for LED • Very few external components needed for operation • Broad range of applications: >2A LED current
Applications
Applications
Applications
• Retrofit LED lighting • MR16/MR11 LED spot lights • Halogen replacement LEDs • Industrial lighting • Architecutral lighting • Building lighting • Street lighting • Illuminated signs
• Offline retrofit LED lighting • Illuminated LED signs and other displays • LED street and traffic lighting • Constant-current source for general purposes • Architecture / building LED lighting • LED backlighting • Line powered LED flood lighting • Interior / exterior LED lighting
• Retrofit LED lighting • Emergency Lighting • Low Voltage Lighting • SELV Lighting • Automotive After-Market (non auto qual) • LED backlighting
Vout [V]
Iout [A]
fs [kHz]
Ta [°C]
Efficiency
Output Current Accuracy
0.75
1000
-40 - 85
≤95%
≤5%
ZLED7010-ZI1R DC/DC x
Buck
1x
6 - 40
40
0.75
1000
-40 - 85
≤95%
≤5%
ZLED7020-ZI1R DC/DC x
Buck
1x
6 - 40
40
1.2
1000 -40 - 105 ≤98%
≤3%
ZLED7320-ZI1R DC/DC x
Buck
1x
6 - 40
40
1.0
1000 -40 - 105 ≤98%
≤3%
DFN-5
PWM/DC dimming
ZLED7520-ZI1R DC/DC x
Buck
1x
6 - 40
40
0.75
1000 -40 - 105 ≤98%
≤3%
DFN-5
PWM/DC dimming
ZLED7720-ZI1R DC/DC x
Buck
1x
6 - 40
40
0.35
1000 -40 - 105 ≤98%
≤3%
DFN-5
PWM/DC dimming
ZLED7030-ZI1R DC/DC x
Buck
1x 8.5 - 40 40
1.2
1000 -40 - 105 ≤98%
≤5%
SOP-8
Switch Dimming
ZLED7330-ZI1R DC/DC x
Buck
1x 8.5 - 40 40
1.0
1000 -40 - 105 ≤98%
≤5%
SOP-8
Switch Dimming
ZLED7530-ZI1R DC/DC x
Buck
1x 8.5 - 40 40
0.75
1000 -40 - 105 ≤98%
≤5%
SOP-8
Switch Dimming
ZLED7730-ZI1R DC/DC x
Buck
1x 8.5 - 40 40
0.35
1000 -40 - 105 ≤98%
≤5%
SOP-8
Switch Dimming
Buck
1x
-1
>1.01
-
-40 - 85
-
-
SOP-8
Offline Driver
85-1 x Flyback, Buck, 1x Buck-Boost 265VAC
>1.01
150
-45 - 105
-1
-
ZLED7012-ZI1R DC/DC x
Charge Pump 4x 2.8 - 5.5 5.5 0.02
1000
-40 - 85
-
≤0.9% QFN-12 Low Voltage 4 Channel
ZLED7022-ZI1R DC/DC x
Charge Pump 6x 2.8 - 5.5 5.5 0.02
1000
-40 - 85
-
≤0.9% QFN-12 Low Voltage 6 Channel
-
-25 - 85
-
ZLED7001-ZI1R DC/DC
x
8-450
Remark
Vin [V]
40
Package
Outputs
6 - 40
internal switch
1x
external switch
Buck
Technology
ZLED7000-ZI1R DC/DC x
Partnumber
Topologies
Type
SOT89-5 PWM/DC dimming SOP-8
Thermal Compensation, PWM/DC dimming
SOT89-5 PWM/DC dimming
ZSLS7031-ZL1R DC/DC
ZLED7002-ZI1R
DC
x
Toggle Dual Channel
ZLED7015-ZI1R DC/DC x ZSLS7025-ZI1R
DC/DC
x
2x 2.7-5.5
-
0.25
Boost
1x
6 - 30
35 ~0.8
1000
-40 - 85
≤95%
Boost
1x
5-100
-¹
500
-40 - 85
≤95%
>1.0¹
-
MSOP-8 Constant Power Off line driver
SOP-8
Low Voltage Detection
≤5% MSOP-10 PWM/DC dimming -
SOP-8
PWM/DC dimming
Note 1: Limited by external switch
Sales and Further Information Zentrum Mikroelektronik Dresden AG Global Headquarters Grenzstrasse 28 01109 Dresden Germany Central Office: Phone +49.351.8822.0 Fax +49.351.8822.600 European Technical Support Phone +49.351.8822.7.772 Fax +49.351.8822.87.772 European Sales (Stuttgart) Phone +49.711.674517.55 Fax +49.711.674517.87955
ZMD America, Inc. 1525 McCarthy Blvd., #212 Milpitas, CA 95035-7453 USA
Phone +855.275.9634 (USA) Phone +408.883.6310 Fax +408.883.6358
LED_Drivers@zmdi.com Zentrum Mikroelektronik Dresden AG, Japan Office 2nd Floor, Shinbashi Tokyu Bldg. 4-21-3, Shinbashi, Minato-ku Tokyo, 105-0004 Japan
ZMD Far East, Ltd. 3F, No. 51, Keelung Road Sec. 2 11052 Taipei Taiwan
Phone +81.3.6895.7410 Fax +81.3.6895.7301
Phone +88 62.2377.8189 Fax +88 62.2377.8199
www.zmdi.com Zentrum Mikroelektronik Dresden AG, Korea Office U-space 1 Building 11th Floor, Unit JA-1102 670 Sampyeong-dong, Bundang-gu, Seongnam-si, Gyeonggi-do, 463-400 Korea Phone +82.31.950.7679 Fax +82.504.841.3026
DISCLAIMER: This information applies to a product under development. Its characteristics and specifications are subject to change without notice. Zentrum Mikroelektronik Dresden AG (ZMD AG) assumes no obligation regarding future manufacture unless otherwise agreed to in writing. The information furnished hereby is believed to be true and accurate. However, under no circumstances shall ZMD AG be liable to any customer, licensee, or any other third party for any special, indirect, incidental, or consequential damages of any kind or nature whatsoever arising out of or in any way related to the furnishing, performance, or use of this technical data. ZMD AG hereby expressly disclaims any liability of ZMD AG to any customer, licensee or any other third party, and any such customer, licensee and any other third party hereby waives any liability of ZMD AG for any damages in connection with or arising out of the furnishing, performance or use of this technical data, whether based on contract, warranty, tort (including negligence), strict liability, or otherwise. © 2013 Zentrum Mikroelektronik Dresden AG — Rev. 3.0