Sscsbrochure letter online rev 1 10 2015 09 by ZMDI

速

pink is the new green enabling energy efficient solutions

Sensor Signal Conditioning Multi-Market Sensing Platforms and Mobile Sensing by ZMDI Over 50 Years of Proven Reliability Designing Semiconductor Solutions

Contents ZMDI, a leading-edge company providing advanced multi-market sensing platform ICs: Resistive Sensor Signal Conditioners (SSCs) • ZSC31010 • ZSC31014 • ZSC31015 Capacitive SSCs • ZSSC3122 • ZSSC3123 Resistive Automotive AEC-Q100-Qualified SSCs • ZSC31050 • ZSSC3136 • ZSC31150 • ZSSC3138 • ZSSC3015 • ZSSC3154 • ZSSC3131 • ZSSC3170 • ZSSC3135 • ZSSC416x/ZSSC417x Magnetoresistive AEC-Q100-Qualified SSC • ZSSC5101 ZMDI, a strong partner for mobile sensing • ZSSC3016 • ZSSC3026 • ZSSC3027 • ZSSC3036 • ZSSC3218 • ZOPT3100

Easy-to-Use Sensor Signal Conditioner ICs from ZMDI Designing sensor interfaces can be quite challenging and time consuming, and producing them in volume is often expensive due to long test cycles on costly production test equipment. ZMDI SSC ICs facilitate both design and production of sensor interfaces by providing programmable, highly accurate, wide gain and quantization functions combined with powerful, high-order digital correction and linearization algorithms. ZMDI Sensor Signal Conditioner ICs are all-in-one, energy-efficient products that are easy to use and are supported by advanced software and expert technical support staff with extensive sensor system design experience. A distinct advantage of our correction algorithms is that they are cali-brated and programmed in an efficient “single-pass” operation that lowers costs by reducing test time and loading of production test equipment without sacrificing precision. ZMDI Sensor Signal Conditioner ICs also lower total system costs by simplifying sensor design with our excellent support tools, reducing external components, minimizing board space, and providing a faster migration to production. ZMDI Sensor Signal Conditioning ICs enable you to get it right – on the first pass!

Energy-Efficient Mixed Signal Solutions Zentrum Mikroelektronik Dresden AG (ZMDI) is a global provider of high-performance, energy-efficient analog and mixed-signal semiconductors and application-specific ICs. Innovation-driven and customer-focused, we enable IC solutions that reduce fuel consumption and CO2 emissions to help protect the environment. Our products range from very low-power SSCs for mobile applications to rugged AEC-Q100-qualified ICs that expedite automotive product design by providing advanced sensor-signal conditioning and configurability while minimizing power consumption. Our sophisticated calibration and configuration techniques significantly reduce external component count and time-to-market for products that meet new emission-reduction standards. For over 50 years, we have offered our customers high-quality products and services at great value. Our high performance products and excellent application support have earned us our customers’ trust and built long-term partnerships with market leaders. ZMDI’s solutions enable our customers to create the most energy-efficient products in sensors, power management, and lighting. Typical applications include measurement of pressure, temperature, strain, torque, proximity, displacement, position, humidity, altitude, fluid level, flow, weight, and sensor aging.

Visit .com for more detailed information

ZMDI - Making A Positive Impact At ZMDI, we truly believe that energy efficiency begins at the chip level and we are proud to have been recognized for our innovative solutions around the world: 2015 - ZMDI was honored with the second place award for our advertisements with “Highest Informational Content” by Markt&Technik in Germany 2015 – ZMDI’s Power Management IC solutions were honored in Hong Kong by the International Alternative Investment Review Magazine with the “Best Company for Innovation and Sustainability Power Management Asia” award 2014 – ZMDI was selected as a finalist for the Annual Creativity in Electronics (ACE) awards in San Jose, California, by the EE Times and EDN magazines in two categories: the “Energy Technology Award” for the ZSSC1956 Intelligent Battery Management IC and the “Marketing Team of the Year Award” for the Power Management ICs media campaign by the Global Marketing and Communications Division of ZMDI 2013 – ZMDI was awarded as the “Best Company for Innovation and Sustainability – Germany” by the International Alternative Investment Review Magazine (IAIR) in Milan, Italy 2012 and 2013 – ZMDI received the Green Apple Award in London, England for innovative semiconductor solutions that contribute to passive energy savings 2011 and 2012 – ZMDI was awarded the “New Product Innovation Award” by Frost & Sullivan for Battery Management IC products in Europe

is a leading-edge global technology company with over 50 years of success designing semiconductor solutions that enable our customers to create energyefficient products

Sensor Interface IC Solutions

Products available at

On-Line Store

Sensor Signal Conditioner by ZMDI

Product Name

Operation Temperature Range in °C

Adjustable Analog Gain Values

ADC Resolution

Sample Rate

Temperature Compensation / Ext.Temperature Sensor

Resistive

ZSSC/ZSC Selection Guide

ZSC31010

-50 to +150

6 / 12 / 24 / 48

14 Bit

Up to 1.0kHz

/ -

ZSC31014

-40 to +125

1.5 / 3 / 6 / 12 / 24 / 48 / 96 / 192

14 Bit

Up to 2.0kHz

/ -

ZSC31015

-50 to +150

6 / 24 / 48 / 96

14 Bit

Up to 1.0kHz

/ 

ZSSC3016

-40 to +85

13.2 to 72

16 Bit

Up to 175Hz

/ -

ZSSC3026

-40 to +110

13.2 to 72

16 Bit

Up to 175Hz

/ -

ZSSC3027

-40 to +85

13.2 to 72

16 Bit

Up to 175Hz

/ -

ZSSC3036

-40 to +110

13.2 to 72

16 Bit

Up to 325Hz

/ -

ZSSC3218

-40 to + 85

6.6 to 216 (linear)

18 Bit

Up to 450Hz

/ -

Sample Rate

Temperature Compensation / Ext.Temperature Sensor

Up to 3.9kHz

/ 

3 / 7 / 9 / 14 / 26 / 35 / 52 / 70 / 105 / 140 / 210 / 280 / 420

13 to 16 Bit

Up to 7.8kHz

/ 

6 / 24 / 48 / 96

14 Bit

Up to 1.0kHz

4 / 

ZSC31050

-40 to +150 (see data sheet)

105 / 140 / 210 / 280 / 420

ZSC31150

-40 to +150

Product Name

Adjustable Analog Gain Values

9 to 15 Bit

Operation Temperature Range in °C

ADC Resolution

See pages 38-41 for details about the ZSSC416x/7x (next generation sensor signal conditioner family) See pages 42-43 for details about the ZSSC5101 (magnetoresistive bridge sensor signal conditioner IC) See pages 58-59 for details about the ZOPT3100 (leading-edge optical sensor IC)

ZMDI‘s Sensor Signal Conditioner (SSC) ICs typically interface with two main sensor types: resistive bridges and differential capacitors. For each sensor type, further specialization allows selecting the optimal balance between price and performance for the required operating voltage and temperature range, gain, resolution, input/output format, and As wide as qualification level. 3 / 7 / 9 / 14 / 26 / 35 / 52 / 70 /

Qualified

Visit .com for more detailed-50information ZSSC3015 to +150

Package Options

I²C™ & SPI

2.7 to 5.5

70µA (2µA Sleep Mode)

SOP8 / Die

Ratiometric Voltage Absolute Voltage 0 to 1V or 5V ZACwire™ (12-Bit DAC)

2.7 to 5.5 (>5.5V with ext. JFET)

250µA

SOP8 / Die

I²C™ & SPI

1.8 to 3.6

900µA (40nA Sleep Mode at 25°C)

Die

I²C™ & SPI

1.8 to 3.6

900µA (50nA Sleep Mode at <85C)

PQFN24 / Die

I²C™ & SPI

1.7 to 3.6

930µA (20nA Sleep Mode)

Die

I²C™ & SPI

1.8 to 3.6

900µA (20nA Sleep Mode at 85C)

Die

I²C™ & SPI

1.68 to 3.6

1.0mA (20nA Sleep Mode at 85C)

Die

Package Options

Current Consumption (see data sheet for conditions)

SOP8 / Die

Current Consumption (see data sheet for conditions)

Supply Voltage in V DC

0.25mA

Supply Voltage in V DC

Interface Options (Note: I2C™ is a trademark of NXP)

2.7 to 5.5 (>5.5V with ext. JFET)

Interface Options (Note: I2C™ is a trademark of NXP)

Ratiometric Voltage Absolute Voltage 0 to 1V or 5V ZACwire™

See more on ZMDI.com Ratiometric or Absolute Voltage; 4mA to 20mA Two PWMs; Two Alarms; I²C™ & SPI & ZACwire™ (11-Bit DAC)

2.7 to 5.5 (>5.5V with ext. JFET)

2.5mA

SSOP16 / Die

Ratiometric 0 to 5V I²C™ & ZACwire™ (12-Bit DAC)

4.5 to 5.5

5.5mA

SSOP14 / DFN14 / Die

ZMDI‘s SSC ICs offer digital compensation of sensor offset, sensitivity, temperature drift, and nonlinearity in wide operational temperature ranges: -50°C to +150°C (maximum range).

Ratiometric Voltage Absolute Voltage 0 to 1V or 5V ZACwire™ (12-Bit DAC)

Sensor Interface IC Solutions

2.7 to 5.5 Products available at (>5.5V with ext. JFET)

300µA

On-Line Store SOP8 / Die

ZSSC3036

-40 to +110

13.2 to 72

16 Bit

Up to 325Hz

/ -

6.6 to 216 (linear)

18 Bit

Up to 450Hz

/ -

Sensor Signal Conditioner by ZMDI

Product Name

Operation Temperature Range in °C

Adjustable Analog Gain Values

ADC Resolution

Sample Rate

Temperature Compensation / Ext.Temperature Sensor

Resistive Automotive AEC Q-100 Qualified

ZSSC/ZSC Selection Guide-40 to + 85 ZSSC3218

ZSC31050

As wide as -40 to +150 (see data sheet)

3 / 7 / 9 / 14 / 26 / 35 / 52 / 70 / 105 / 140 / 210 / 280 / 420

9 to 15 Bit

Up to 3.9kHz

/ 

ZSC31150

-40 to +150

3 / 7 / 9 / 14 / 26 / 35 / 52 / 70 / 105 / 140 / 210 / 280 / 420

13 to 16 Bit

Up to 7.8kHz

/ 

ZSSC3015

-50 to +150

6 / 24 / 48 / 96

14 Bit

Up to 1.0kHz

/ 

ZSSC3131

-40 to +150

3 / 7 / 9 / 14 / 26 / 35 / 52 / 70 / 105

13 to 14 Bit

Up to 200Hz

/ -

ZSSC3135

-40 to +150

3 / 7 / 9 / 14 / 26 / 35 / 52 / 70 / 105

13 to 14 Bit

Up to 200Hz

/ 

ZSSC3136

-40 to +150

3 / 7 / 9 / 14 / 26 / 35 / 52 / 70 / 105

13 to 14 Bit

Up to 200Hz

/ 

ZSSC3138

-40 to +150

3 / 7 / 9 / 14 / 26 / 35 / 52 / 70 / 105 / 140 / 210 / 280 / 420

13 to 16 Bit

Up to 7.8kHz

/ -

ZSSC3154

-40 to +150

3 / 7 / 9 / 14 / 26 / 35 / 52 / 70 / 105 / 140 / 210 / 280 / 420

14 Bit

Up to 2.0kHz

/ 

ZSSC3170

-40 to +150

3 / 7 / 9 / 14 / 26 / 35 / 52 / 70 / 105 / 140 / 210 / 280 / 420

13 to 14 Bit

Up to 430Hz

/ 

Capacitive

Input Capacitance Ranges in pF ZSSC3122

ZSSC3123

-20 to +125

2 to 10

8 to 14 Bit

Up to 1.0kHz

/ -

-40 to +125

2 to 8 8 to 32 32 to 130 130 to 260

8 to 14 Bit

Up to 1.0kHz

/ -

Visit .com for more detailed information

(20nA Sleep Mode)

I²C™ & SPI

1.68 to 3.6

1.0mA (20nA Sleep Mode at 85C)

Die

Package Options

Die

Current Consumption (see data sheet for conditions)

900µA (20nA Sleep Mode at 85C)

Supply Voltage in V DC

1.8 to 3.6

Interface Options (Note: I2C™ is a trademark of NXP)

I²C™ & SPI

Ratiometric or Absolute Voltage; 4mA to 20mA Two PWMs; Two Alarms; I²C™ & SPI & ZACwire™ (11-Bit DAC)

2.7 to 5.5 (>5.5V with ext. JFET)

2.5mA

SSOP16 / Die

Ratiometric 0 to 5V I²C™ & ZACwire™ (12-Bit DAC)

4.5 to 5.5

5.5mA

SSOP14 / DFN14 / Die

Ratiometric Voltage Absolute Voltage 0 to 1V or 5V ZACwire™ (12-Bit DAC)

2.7 to 5.5 (>5.5V with ext. JFET)

300µA

SOP8 / Die

Ratiometric 0 to 5V I²C™ & ZACwire™ (12-Bit DAC)

4.5 to 5.5

5.5mA

SSOP14 / Die

Ratiometric 0 to 5V I²C™ & ZACwire™ (12-Bit DAC)

4.5 to 5.5

5.5mA

SSOP14 / Die

Ratiometric 0 to 5V I²C™ & ZACwire™ (12-Bit DAC)

4.5 to 5.5

5.5mA

SSOP14 / Die

Ratiometric 0 to 5V I²C™ & ZACwire™ (12-Bit DAC)

4.5 to 5.5

5.5mA

SSOP14 / Die

Dual Analog Out Ratiometric 0 to 5V I²C™ & ZACwire™ (12-Bit DAC)

4.5 to 5.5

10mA

QFN32 / Die

PWM (12-Bit) LIN (1.3 / 2.0 / 2.1)

7 to 18

7mA (40µA Sleep Mode)

SSOP20/ DFN20 / Die

I²C™ & SPI (only MISO) PDM (ratiometric analog output possible - RC filter) Two Alarms

1.8 to 5.5

60µA (1µA Sleep Mode)

TSSOP14 / Die

I²C™ & SPI (only MISO) PDM (ratiometric analog output possible - RC filter) Two Alarms

2.3 to 5.5

60µA (1µA Sleep Mode)

TSSOP14 / Die

Sensor Interface IC Solutions

Products available at

On-Line Store

ZSC31010

RBicLite™ Analog Output Sensor Signal Conditioner

ZSC31010

RBicLite™ Analog Output Sensor Signal Conditioner

Brief Description

Benefits

The ZSC31010 is a sensor signal conditioner integrated circuit, which enables easy and precise calibration of resistive bridge sensors via EEPROM. When mated to a resistive bridge sensor, it will digitally correct offset and gain with the option to correct offset and gain coefficients and linearity over temperature. A second-order compensation can be enabled for temperature coefficients of gain or offset or bridge linearity. The ZSC31010 communicates via ZMDI’s ZACwire™ serial interface to the host computer and is easily mass calibrated in a Windows® environment. Once calibrated, the output pin Sig™ can provide selectable 0 to 1 V, rail-to-rail ratiometric analog output, or digital serial output of bridge data with optional temperature data.

     

Available Support    

Features 

Digital compensation of sensor offset, sensitivity, temperature drift, and non-linearity



Accommodates differential sensor signal spans, from 3 mV/V to 105 mV/V



ZACwire™ One-Wire Interface (OWI)



Internal temperature compensation and detection via bandgap PTAT (proportional to absolute temperature)



Output options: rail-to-rail analog output voltage, absolute analog voltage, digital ZACwire™ OneWire Interface (OWI)



Optional sequential output of both temperature and bridge readings on ZACwire™ digital output



Fast response time, 1 ms (typical)



High voltage protection up to 30 V with external JFET



Chopper-stabilized true differential ADC



Buffered and chopper-stabilized output DAC

No external trimming components required Simple PC-controlled configuration and calibration via ZACwire™ One-Wire Interface High accuracy (±0.1% FSO @ -25 to 85°C; ±0.25% FSO @ -50 to 150°C) Single pass calibration – quick and precise Suitable for battery-powered applications Small SOP8 package

Development Kit available Mass Calibration Kit available Support for industrial mass calibration available Quick circuit customization possible for large production volumes

Physical Characteristics Supply voltage 2.7 to 5.5 V, with external JFET 5.5V to 30 V Current consumption depending on adjusted sample rate: 0.25 mA to 1 mA Wide operational temperature: –50 to +150°C

ZSC31010 Application Circuit – Digital Output Vsupply +4.5 to +5.5 V

VDD Bsink

Sig™

OUT/OWI

ZSC31010

VBP

10nF

Vgate VBN VSS

0.1µF

Ground

For more information, contact ZMDI via SSC@zmdi.com. © 2013 Zentrum Mikroelektronik Dresden AG — Rev. 2.91 — November 1, 2013. All rights reserved. The material contained herein may not be reproduced, adapted, merged, translated, stored, or used without the prior written consent of the copyright owner. The information furnished in this publication is subject to changes without notice.

Visit .com for more detailed information

ZSC31010

     

RBicLite™ Analog Output Sensor Signal Conditioner

ZSC31010 Block Diagram

Office Automation White Goods Automotive Portable Devices

2.7 to 5.5 V VDD

5.5 V to 30 V

Temp. Reference

Vgate

VDD Regulator

RBicLITE™ ZSC31010

DAC

VSS 8 SIGTM 7

2 VBP 3 N/C

Industrial

VBP

Building Automation

INMUX

VBN

Office Automation

PREAMP

ADC

EEPROM

DSP

Bsink optional

White Goods

Power Save

Automotive

POR Osc.

Portable Devices

Analog Block

VSS

Digital Block

Your Innovative Designs

Ordering Examples (Please see section 11 in ZSC31010CEB

ZSC31010 Die — Temperature range: -5

ZSC31010CEC

ZSC31010 Die — Temperature range: -5

ZSC31010KIT

+5.5 to +30 V ZSC31010 ZACwire™ SSC Evaluation K Board, USB Cable, 5 IC Samples

JFET

3 N/C 4 VBN Optional Bsink

VSS 8 SIG

OUT

2 VBP

VDD 6

VSS 8

0.1 F

Optional Bsink

Ground

SIGTM 7

3 N/C

VDD 6

Vsupply

OUT

4 VBN

Vgate 5

Zentrum Mikroelektronik ZSC31010 Dresden AG Global Headquarters Grenzstrasse 28 01109 Dresden, Germany

Ordering Examples (Please see section 11 in the data sheet for additional options.) Central Office: Sales Code

Sales and Further Information 10 nF

10 nF

Vgate 5

ZSC31010

1 Bsink

Phone +49.351.8822.0 Fax +49.351.8822.600

Description

ZSC31010CEB

ZSC31010 Die — Temperature range: -50°C to +150°C

ZSC31010CEC

ZSC31010 Die — Temperature range: -50°C to +150°C

ZMD America, Inc. 1525 McCarthy Blvd., #212 Milpitas,Ground CA 95035-7453 USA

0.1 F

USA Phone +855.275.9634 Phone +408.883.6310 Fax +408.883.6358 Package

Unsawn on Wafer

Sawn on Wafer Frame This information ap European Technical Support DISCLAIMER: Zentrum Mikroelektronik Dresden Phone +49.351.8822.7.772 ZSC31010 SOP8 (150 mil) — Temperature range: -50°C to +150°C Tube: add “-T” to sales code information furnished hereby is b Fax +49.351.8822.87.772 Reel: add “-R” licensee, or any other third party in any way related to the furnishin European Sales (Stuttgart) ZSC31010 ZACwire™ SSC Evaluation Kit: Communication Board, SSC Board, Sensor Replacement Kit customer, licensee or any other t Phone +49.711.674517.55 Board, USB Cable, 5 IC Samples any damages in connection with Fax +49.711.674517.87955 tort (including negligence), strict li

Sales and Further Information

www.zmdi.com

SSC@zmdi.com

Zentrum Mikroelektronik Dresden AG Global Headquarters Grenzstrasse 28 01109 Dresden, Germany

ZMD America, Inc. 1525 McCarthy Blvd., #212 Milpitas, CA 95035-7453 USA

Central Office: Phone +49.351.8822.0 Fax +49.351.8822.600

USA Phone +855.275.9634 Phone +408.883.6310 Fax +408.883.6358

European Technical Support Phone +49.351.8822.7.772 Fax +49.351.8822.87.772

European Sales (Stuttgart) Phone +49.711.674517.55 Fax +49.711.674517.87955

Zentrum Mikroelektronik Dresden AG, Japan Office 2nd Floor, Shinbashi Tokyu Bldg. 4-21-3, Shinbashi, Minato-ku Tokyo, 105-0004 Japan

ZMD FAR EAST, Ltd. 3F, No. 51, Sec. 2, Keelung Road 11052 Taipei Taiwan

Phone +81.3.6895.7410 Fax +81.3.6895.7301

Phone +886.2.2377.8189 Fax +886.2.2377.8199

Zentrum Mikroelektronik Dresden AG, Korea Office U-space 1 Building 11th Floor, Unit JA-1102 670 Sampyeong-dong Bundang-gu, Seongnam-si Gyeonggi-do, 463-400 Korea Phone +82.31.950.7679 Fax +82.504.841.3026

Sensor Interface IC Solutions

© 2013 Zentrum Mikroelektronik Dresden AG— Rev. 2.91 — November 1, 2013 All rights reserved. The material contained herein may not be reproduced, adapted, merged, translated, stored, or used without the prior written consent of the copyright owner.

0.1 F

1nF

ZACwireTM Interface

Vsupply

2 VBP

10 n

Absolute Analog ZSC31010CEG1 Voltage Output Applications ZSC31010 SOP8 (150 mil) — Temperat

+2.7 to +5.5 V

VDD 6

0 V to 1 V 4 VBN TM Ratiometric Vgate 5 SIG Rail-to-Rail OUTBUF Optional Bsink OWI/ ZSC31010 ZACwireTM

Sales Code

Rail-to-Rail Ratiometric Voltage Output Applications

ZSC31010KIT

VSUPPLY

1 Bsink

Highly Versatile Applications in Many Markets Including

1 Bsink

Rail-to-Rail Ratiometric Voltage Output Applica

0.1 F

ZSC31010CEG1

Your Innovative Designs

JFET (optional if supply is 2.7 to 5.5 V) S

      

Building Automation

Products available at

On-Line Store

ZSC31014

RBiciLiteTM Digital Output Sensor Signal Conditioner

ZSC31014

RBiciLiteTM Digital Output Sensor Signal Conditioner

Brief Description

Benefits

The ZSC31014 is a CMOS integrated circuit for highly accurate amplification and analog-to-digital conversion of differential and half-bridge input signals. The ZSC31014 can compensate the meast nd st sured signal for offset, 1 and 2 order span, and 1 nd and 2 order temperature (Tco and Tcg). It is well suited for sensor-specific correction of bridge sensors. Digital compensation of signal offset, sensitivity, temperature drift, and non-linearity is accomplished via an internal digital signal processor running a correction algorithm with calibration coefficients stored in a non-volatile EEPROM.



The ZSC31014 is adjustable to nearly all piezoresistive bridge sensors. Measured and corrected bridge values are provided at digital output pins, 2 which can be configured as I C™* or SPI. The digital 2 I C™ interface can be used for a simple PCcontrolled calibration procedure to program calibration coefficients into an on-chip EEPROM. The calibrated ZSC31014 and a specific sensor are mated digitally: fast, precise, and without the cost overhead associated with trimming by external devices or laser trimming.

Available Support

The ZSC31014’s integrated diagnostics functions are well suited for safety-critical applications.

Features High accuracy (±0.1% FSO @ -25 to +85°C; ±0.25% FSO @ -40 to +125°C) nd 2 order charge-balancing analog-to-digital converter provides low noise, 14-bit data at sample rates exceeding 2kHz Fast power-up to data output response: 3ms at 4MHz Digital compensation of sensor offset, sensitivity, temperature drift, and non-linearity Eight programmable analog gain settings combine with a digital gain term; accommodates bridges with spans <1mV/V and high offset Internal temperature compensation for sensor correction and for corrected temperature output 48-bit customer ID field for module traceability

 

  

 

  

Simple PC-controlled configuration and single2 pass digital calibration via I C™ interface – quick and precise; SPI option for measurement mode Eliminates need for external trimming components On-chip diagnostic features add safety to the application (e.g., EEPROM signature, bridge connection checks, bridge short detection). Low-power Sleep Mode lengthens battery life Enables multiple sensor networks

Evaluation Kit Application Notes Mass Calibration Solution

Physical Characteristics     

Wide supply voltage capability: 2.7V to 5.5V Current consumption as low as 70μA depending on programmed sample rate Low-power Sleep Mode (<2μA @ 25°C) Operation temperature: -40°C to +125°C Small SOP8 package 2

ZSC31014 Application: I C™ Interface, Low-Power Bsink Option, Internal Temperature Correction Vsupply

ZSC31014 VSS BSINK

(2.7V to 5.5V)

VDD INT/SS

VBP

SDA/MISO

VBN

SCL/SCLK

0.1µF

GND

* I C™ is a trademark of NXP.

For more information, contact ZMDI via SSC@zmdi.com.

Visit .com for more detailed information

© 2013 Zentrum Mikroelektronik Dresden AG — Rev. 1.63 — December 10, 2013. All rights reserved. The material contained herein may not be reproduced, adapted, merged, translated, stored, or used without the prior written consent of the copyright owner. The information furnished in this publication is subject to changes without notice.

ZSC31014

Medical: infusion pumps, blood pressure meters, air mattresses, apnea monitors

RBiciLiteTM Digital Output Sensor Signal Conditioner

White Goods / Appliances: fluid level, refrigerant Consumer: body monitors, portable monitors, desktop weather stations, bathroom scales, toys/games

ZSC31014 Block Diagram

RBiciLite™

Temperature

Reference

Sensor

Applications: Industrial: building automation, data loggers, pressure meters, leak detection monitoring Medical: infusion pumps, blood pressure meters, air mattresses, apnea monitors

PreAmp

INMUX

Bsupply

EEPROM w/ Charge Pump & Checksum

VSS

VBN T/

SCL/SCLK

0.1µF

INT/SS

GND

I2C or SPI SDA/MISO Interface SCL/SCLK Examples (Refer to section 10 in the data

Sales Code

Description

ZSC31014EAB

ZSC31014 Die — Temperature range: -40°C

ZSC31014EAG1

ZSC31014 SOP8 (150 mil) — Temperature

ZSC31014KIT

ZSC31014 SSC Evaluation Kit: Communica Board, USB Cable, 5 IC Samples (software

ZSC31014

VSS BSINK

VDD

Differential Signal from Any Source

BSINK INT/SS O VBP SDA/MISO U

0.1µF GND

Sales Code

Description

ZSC31014EAB

ZSC31014 Die — Temperature range: -40°C to +125°C

ZSC31014EAC

ZSC31014 Die — Temperature range: -40°C to +125°C

V Supply

VDD INT/SS

Sales VBP andSDAFurther Information /MISO VBN SCL/SCLK Zentrum Mikroelektronik Dresden AG Global Headquarters Grenzstrasse 28 01109 Dresden, Germany

Central Office: Phone +49.351.8822.0 Fax +49.351.8822.600

Ordering Examples (Refer to section 10 in the data sheet for additional options.)

ZSC31014KIT

VDD

BSINK INT/SS O VBP SDA/MISO U

ZSC31014EAC ZSC31014 Die — Temperature range: -40°C Application: Generic Differential A2D Converter

Vsupply 5V

SCL/SCLK

VSS

DSP Core

Ordering

Application: Half-Bridge Voltage Measurement

ZSC31014EAG1

14-Bit ADC

Optional Bsink

Consumer: body monitors, portable monitors, desktop weather stations, bathroom scales, toys/games

VBN T/

VBN

White Goods / Appliances: fluid level, refrigerant

VSS

ZSC31014

e.g. HIH4000

VBP

Vsupply 5V

POR/Oscillator

ZSC31014

Diagnostics

e.g. HIH4000

VDD

0.1µF

- 5.5V) Measurement Application: Half-Bridge (2.7V Voltage

ZMD America, Inc.

0 .1525 1 µF McCarthy Blvd., #212

Milpitas, CA 95035-7453 USA GND

USA Phone +855.275.9634 Phone +408.883.6310 Fax +408.883.6358

Package

Unsawn on Wafer European Technical Support DISCLAIMER: This information ap Zentrum Mikroelektronik Dresden PhoneSawn +49.351.8822.7.772 on Wafer Frame information furnished hereby is be Fax +49.351.8822.87.772 licensee, or any other third party f ZSC31014 SOP8 (150 mil) — Temperature range: -40° to +125°C Tube: add “-T” to sales code /inReel: addrelated “-R” to the furnishing any way European Sales (Stuttgart) customer, licensee or any other th ZSC31014 SSC Evaluation Kit: Communication Board, SSC Board, Sensor Replacement PhoneKit+49.711.674517.55 any damages in connection with o Board, USB Cable, 5 IC Samples (software can downloaded on www.zmdi.com/zsc31014) Fax +49.711.674517.87955 tort (including negligence), strict lia

Sales and Further Information

www.zmdi.com

SSC@zmdi.com

Zentrum Mikroelektronik Dresden AG Global Headquarters Grenzstrasse 28 01109 Dresden, Germany

ZMD America, Inc. 1525 McCarthy Blvd., #212 Milpitas, CA 95035-7453 USA

Central Office: Phone +49.351.8822.0 Fax +49.351.8822.600

USA Phone +855.275.9634 Phone +408.883.6310 Fax +408.883.6358

European Technical Support Phone +49.351.8822.7.772 Fax +49.351.8822.87.772

European Sales (Stuttgart) Phone +49.711.674517.55 Fax +49.711.674517.87955

Zentrum Mikroelektronik Dresden AG, Japan Office 2nd Floor, Shinbashi Tokyu Bldg. 4-21-3, Shinbashi, Minato-ku Tokyo, 105-0004 Japan

ZMD FAR EAST, Ltd. 3F, No. 51, Sec. 2, Keelung Road 11052 Taipei Taiwan

Phone +81.3.6895.7410 Fax +81.3.6895.7301

Phone +886.2.2377.8189 Fax +886.2.2377.8199

Sensor Interface IC Solutions

Products available at

On-Line Store

ZSC31015

RBicdLite™ Analog Output Sensor Signal Conditioner w/ Diagnostic Features

ZSC31015

RBicdLite™ Analog Output Sensor Signal Conditioner w/ Diagnostic Features

Brief Description

Benefits

The ZSC31015 is adjustable to nearly all piezoresistive bridge sensors. Measured and corrected bridge values are provided at the SIG™ pin, which can be configured as an analog voltage output or as a one-wire serial digital output.



No external trimming components required



Simple PC-controlled configuration and calibration via one-wire interface



The digital one-wire interface (OWI) can be used for a simple PC-controlled calibration procedure to program a set of calibration coefficients into an on-chip EEPROM. The calibrated ZSC31015 and a specific sensor are mated digitally: fast, precise, and without the cost overhead associated with trimming by external devices or laser. Integrated diagnostics functions make the ZSC31015 particularly well suited for automotive applications.*

High accuracy: ±0.1% FSO @ -25 to 85°C; ±0.25% FSO @ -50 to 150°C



Single-pass calibration – quick and precise

Features  



    

   

Digital compensation of sensor offset, sensitivity, temperature drift, and non-linearity Programmable analog gain and digital gain; accommodates bridges with spans < 1mV/V and high offset Many diagnostic features on chip (e.g., EEPROM signature, bridge connection checks, bridge short detection, power loss detection) Independently programmable high and low clipping levels 24-bit customer ID field for module traceability Internal temperature compensation reference (no external components) Option for external temperature compensation with addition of single diode Output options: rail-to-rail ratiometric analog voltage (12-bit resolution), absolute analog voltage, digital one-wire interface Fast power-up to data out response; output available 5ms after power-up Current consumption depends on programmed sample rate: 1mA down to 250A (typical) Fast response time: 1ms (typical) High voltage protection up to 30V with external JFET

Visit .com for more detailed information

Available Support 

Evaluation Kit available



Mass Calibration System available Support for industrial mass calibration available

 

Quick circuit customization possible for large production volumes

Physical Characteristics 

Wide operation temperature: –50°C to +150°C



Supply voltage 2.7 to 5.5V; with external JFET, 5.5 to 30V



Small SOP8 package

ZSC31015 Application Circuit Vsupply

+2.7 to +5.5 V

VDD SIG™

OUT/OWI

ZSC31015

VBP

Vgate VBN VSS

0.1 F Ground

* Not AEC-Q100-qualified.

For more information, contact ZMDI via SSC@zmdi.com.

© 2013 Zentrum Mikroelektronik Dresden AG — Rev. 2.11— December 11, 2013. All rights reserved. The material contained herein may not be reproduced, adapted, merged, translated, stored, or used without the prior written consent of the copyright owner. The information furnished in this publication is subject to changes without notice.

ZSC31015

Building Automation Office Automation White Goods Automotive * Portable Devices Your Innovative Designs

     

RBicdLite™ Analog Output Sensor Signal Conditioner w/ Diagnostic Features

Optional Ext. Diode for Temp

Dig

* Not AEC-Q100-qualified.

ZSC31015 Block Diagram

JFET1 (Optional if supply is 2.7 to 5.5 V)

5.5 VOutput to 30 V Rail-to-Rail Ratiometric Voltage Applications VSUPPLY S

0.1 F

Highly Versatile Applications in Many Markets Including       

Industrial Building Automation Office Automation White Goods Automotive * Portable Devices Your Innovative Designs

VDD (2.7 to 5.5 V)

Sensor Diagnostics

PTAT

Temperature Reference

Vgate

VBP

Ext Temp (Optional)

Bsink

INMUX

PREAMP

Power Save

EEPROM with Charge Pump

POR/Oscillator Analog Block Digital Block

12-Bit DAC

ZSC31015

VBN Optional Ext. Diode for Temp

RBicdLite

VDD Regulator

14-Bit ADC

SigTM 7

3 ExtTemp 4 VBN

0 V to 1 V

OUTBUF1 4 VBN

Optional Bsink

ZACwire Interface

Ratiometric 5 Vgate Rail-to-Rail

OWI/ZACwireTM

ZSC31015 Power Lost Diagnostic

0.1 F

Desc

ZSC31015 Die — Temperature range: -50°C

Absolute Analog Voltage Output Applications ZSC31015EEC ZSC31015 Die — Temperature range: -50°C BSS169 (150 mil) — Temperature ZSC31015 SOP8 Vsupply

ZSC31015EEG1

Vsupply

2 VBP

6 VDD SIGTM

Sales Code

+2.7 to +5.5 V

VSS 8

SigTM 7

ZSC31015EEB

1 Bsink

2 VBP

Ordering Examples (See section 11 of the data sheet

VSS

* Not AEC-Q100-qualified.

Rail-to-Rail Ratiometric Voltage Output Applications

VSS 8

3 ExtTemp

Digital Core

1 Bsink

ZSC31015KIT 1 Bsink 2 VBP

OUT

3 ExtTemp

VDD 6

+5.5 to +30 V

ZSC31015 ZACwire™ SSC Evaluation Kit: C 8 VSS Replacement Board, USB Cable, 5 IC Samp

(ZACwire™ SSC Evaluation Software can b OUT

SigTM 7 VDD 6

Sales and Further Information Vgate VBN

Vgate 5

Zentrum Mikroelektronik ZMD America, Inc. 0.1 F ZSC31015 Dresden AG 1525 McCarthy Blvd., #212 Ground Global Headquarters Milpitas,Ground CA 95035-7453 Grenzstrasse 28 USA 01109 Dresden, Germany Ordering Examples (See section 11 of the data sheet for additional temperature range options.) USA Phone +855.275.9634 Central Office: Sales Code Description Phone +49.351.8822.0 PackagePhone +408.883.6310 Fax +49.351.8822.600 Fax +408.883.6358 Unsawn on Wafer ZSC31015EEB ZSC31015 Die — Temperature range: -50°C to +150°C ZSC31015EEC ZSC31015EEG1 ZSC31015KIT

0.1 F

ZSC31015

Optional Bsink

Sawn on Wafer Frame European Technical Support DISCLAIMER: This information ap ZSC31015 SOP8 (150 mil) — Temperature range: -50°C to +150°C add “-T” to sales code. Zentrum Reel: add “-R” Mikroelektronik Dresden PhoneTube: +49.351.8822.7.772 information furnished hereby is be Fax +49.351.8822.87.772 licensee, or any other third party fo ZSC31015 ZACwire™ SSC Evaluation Kit: Communication Board, SSC Board, Sensor Kit in any way related to the furnishing European Sales (Stuttgart) Replacement Board, USB Cable, 5 IC Samples (SOP8 150mil) customer, licensee or any other th Phone +49.711.674517.55 (ZACwire™ SSC Evaluation Software can be downloaded from www.zmdi.com/zsc31015) any damages in connection with o Fax +49.711.674517.87955 tort (including negligence), strict lia ZSC31015 Die — Temperature range: -50°C to +150°C

Sales and Further Information

www.zmdi.com

SSC@zmdi.com

Zentrum Mikroelektronik Dresden AG Global Headquarters Grenzstrasse 28 01109 Dresden, Germany

ZMD America, Inc. 1525 McCarthy Blvd., #212 Milpitas, CA 95035-7453 USA

Central Office: Phone +49.351.8822.0 Fax +49.351.8822.600

USA Phone +855.275.9634 Phone +408.883.6310 Fax +408.883.6358

European Technical Support Phone +49.351.8822.7.772 Fax +49.351.8822.87.772

European Sales (Stuttgart) Phone +49.711.674517.55 Fax +49.711.674517.87955

Zentrum Mikroelektronik Dresden AG, Japan Office 2nd Floor, Shinbashi Tokyu Bldg. 4-21-3, Shinbashi, Minato-ku Tokyo, 105-0004 Japan

ZMD FAR EAST, Ltd. 3F, No. 51, Sec. 2, Keelung Road 11052 Taipei Taiwan

Phone +81.3.6895.7410 Fax +81.3.6895.7301

Phone +886.2.2377.8189 Fax +886.2.2377.8199

Sensor Interface IC Solutions

Products available at

Zentrum Mikroelektronik Dresden AG, Korea Office U-space 1 Building th 11 Floor, Unit JA-1102 670 Sampyeong-dong Bundang-gu, Seongnam-si Gyeonggi-do, 463-400 Korea Phone +82.31.950.7679 Fax +82.504.841.3026

On-Line Store

ZSSC3122 ZSSC3122 ZSSC3122

cLite™ Low Voltage Capacitive Sensor Signal Conditioner cLite™ Low Voltage Capacitive Sensor Signal Conditioner cLite™ Low Voltage Capacitive Sensor Signal Conditioner

ZSSC3122

cLite™ Low Voltage Capacitive Sensor Signal Conditioner

Brief Description Brief Description Brief Description

Benefits Benefits Benefits

The ZSSC3122 CMOS integrated circuit for TheThe ZSSC3122 is is ais CMOS integrated circuit for for ZSSC3122 aa CMOS integrated circuit conversion and accurate capacitance-to-digital accurate capacitance-to-digital conversion and accurate capacitance-to-digital conversion and sensor-specific correction of capacitive capacitive sensor sigsensor-specific correction of of capacitive sensor sig-sigsensor-specific correction sensor nals. Digital compensation of sensor sensor offset, sensitinals. Digital compensation of of sensor offset, sensitinals. Digital compensation offset, sensitivity, and temperature drift accomplished via an vity, andand temperature driftdrift is accomplished viavia an an vity, temperature isis accomplished internal digital signal processor running a correction internal digital signal processor running a correction internal digital signal processor running a correction algorithm with calibration coefficients stored algorithm with calibration coefficients stored in in ain aa algorithm with calibration coefficients stored non-volatile EEPROM. non-volatile EEPROM. non-volatile EEPROM. The ZSSC3122 configurable for capacitive senTheThe ZSSC3122 is configurable for for capacitive senZSSC3122 isis configurable capacitive sensors with capacitances up 10pF to 10pF 10pF and sensitivity sors with capacitances up up to andand a sensitivity sors with capacitances to aa sensitivity of 125aF/LSB. 125aF/LSB. is compatible compatible with both single of of 125aF/LSB. It is compatible with both single ItIt is with both single capacitive sensors (both terminals must be capacitive sensors (both terminals must be capacitive sensors (both terminals must be accessible) and differential capacitive sensors. accessible) andand differential capacitive sensors. accessible) differential capacitive sensors. Measured and corrected sensor values can be Measured andand corrected sensor values cancan be be Measured corrected sensor values 2 22 * ** output I CC™ SPI, PDM, oralarms. alarms. CI™ ,™SPI, PDM, or alarms. output as as Ias , ,SPI, PDM, or output 2 22 C™ interface can be used for simple PCThe interface cancan be be used for for a simple PC-PCTheThe I C™ interface used aa simple I I C™ controlled calibration procedure to program a set of controlled calibration procedure to program a set of controlled calibration procedure to program a set of calibration coefficients into an on-chip EEPROM. calibration coefficients intointo an an on-chip EEPROM. calibration coefficients on-chip EEPROM. The calibrated ZSSC3122 and specific sensor are TheThe calibrated ZSSC3122 andand a specific sensor areare calibrated ZSSC3122 aa specific sensor mated digitally: fast, precise, and without the cost mated digitally: fast, precise, andand without thethe cost mated digitally: fast, precise, without cost overhead oftrimming trimming byexternal external devices orlaser. laser. overhead of trimming by by external devices or laser. overhead of devices or

 Minimized Minimized calibration costs: nolaser laser trimming,  Minimized calibration costs: no no laser trimming, calibration costs: trimming,

Features Features Features

 Maximum Maximum target input capacitance: 10pF  Maximum target input capacitance: 10pF target input capacitance: 10pF  Sampling Sampling rates asfast fast as0.7ms 0.7ms 8-bit resolution;  Sampling rates as as fast as as 0.7ms at 8-bit resolution; rates atat8-bit resolution;

1.6ms 10-bit; 5.0ms 12-bit; 18.5ms at14-bit 1.6ms at 10-bit; 5.0ms at 12-bit; 18.5ms at14-bit 1.6ms atat10-bit; 5.0ms atat12-bit; 18.5ms at14-bit st

stst

 Digital Digital compensation ofsensor: sensor: piece-wise  Digital compensation of sensor: piece-wise 1 11 compensation of piece-wise nd nd nd

    

order sensor compensation orup upto to and 2 order sensor compensation or up to andand 2 2order sensor compensation or rd rdrd order single-region sensor compensation 3 order single-region sensor compensation 3 3order single-region sensor compensation nd st stst nd nd  Digital compensation of 1 and and 2 order order Digital compensation of 1of 2 2order  Digital compensation 1and temperature gain and offset drift temperature gain andand offset driftdrift temperature gain offset  Internal Internal temperature compensation reference temperature compensation reference Internal temperature compensation reference (no external components) (no(no external components) external components)  Programmable Programmable capacitance span and offset capacitance span andand offset Programmable capacitance span offset  Layout Layout customized fordie-die die-die bonding with sensor customized for for die-die bonding with sensor Layout customized bonding with sensor forlow-cost, low-cost, high-density chip-on-board assembly for for low-cost, high-density chip-on-board assembly high-density chip-on-board assembly † ††  Accuracy as high as Accuracy as high as as  Accuracy as high ±0.25% FSO@ -20125°C, 125°C, 3V, 5V, Vsupply ±10% ±0.25% FSO@ -20-20 to 3V,3V, 5V,5V, Vsupply ±10% ±0.25% FSO@ toto125°C, Vsupply ±10%

one-pass calibration using digital interface one-pass calibration using a digital interface one-pass calibration using aadigital interface  Excellent Excellent forlow-power low-power battery applications  Excellent for for low-power battery applications battery applications

Interfaces Interfaces Interfaces  I²C™ I²C™ orSPI SPI interface—easy connection toaa  I²C™ or SPI interface—easy connection to ato or interface—easy connection

microcontroller microcontroller microcontroller  PDM PDM outputs (Filtered Analog Ratiometric) for  PDM outputs (Filtered Analog Ratiometric) for for outputs (Filtered Analog Ratiometric) both capacitance and temperature both capacitance and temperature both capacitance and temperature  Up Uptwo totwo two alarms that can act asfull fullpush-pull push-pull or  Up to alarms thatthat cancan actact as as full push-pull or or to alarms open-drain switches open-drain switches open-drain switches

Physical Characteristics Physical Characteristics Physical Characteristics  Supply Supply voltage: 1.8 to5.5V 5.5V  Supply voltage: 1.81.8 to 5.5V voltage: to  Typical Typical current consumption 650μA down to  Typical current consumption 650μA down to to current consumption 650μA down

60μA depending onconfiguration configuration 60μA depending on on configuration 60μA depending  Typical Typical Sleep Mode current: 1μA at85°C 85°C  Typical Sleep Mode current: ≤ 1μA at 85°C Sleep Mode current: ≤≤1μA at  Operation Operation temperature: –20°C to+125°C +125°C  Operation temperature: –20°C to +125°C temperature: –20°C to  Die Die orTSSOP14 TSSOP14 package  Die or TSSOP14 package or package

Available Support Available Support Available Support  ZSSC3122 ZSSC3122 SSC Evaluation Kitavailable: available: SSC  ZSSC3122 SSC Evaluation Kit Kit available: SSC SSC Evaluation SSC

Evaluation Board, samples, software, Evaluation Board, samples, software, Evaluation Board, samples, software, documentation. documentation. documentation.  Support Support forindustrial industrial mass calibration available.  Support for for industrial mass calibration available. mass calibration available.  Quick Quick circuit customization option forlarge large  Quick circuit customization option for for large circuit customization option production volumes. production volumes. production volumes. Application: Digital Output, Alarms Application: Digital Output, Alarms Application: Digital Output, Alarms VSUPPLY SUPPLY VVSUPPLY

5.5V) (+1.8V(+1.8V to(+1.8V 5.5V) toto5.5V)

VDD VDDVDD

™ ™ ™ cLite cLite cLite

ZSSC3122 Vcore ZSSC3122 VcoreVcore ZSSC3122 0.1µF 0.1µF0.1µF 0.1µF 0.1µF 0.1µF Ready Ready Ready GND GNDGND

VSS VSS VSS

SDA/MISO SDA/MISO SDA/MISO SCL/SCLK SCL/SCLK SCL/SCLK

C0 C0 C0

SS SS SS Alarm_High Alarm_High Alarm_High

CC CC CC

* †

Alarm_Low Alarm_Low Alarm_Low

* 2IisC™ registered trademark NXP. I2C™ a registered trademark of NXP. I C™ isisaaregistered trademark ofofNXP. 2

Visit .com for more detailed information

† Seesheet data sheet section for restrictions. See† data section 1.3 for1.3 restrictions.

See data sheet section 1.3 for restrictions.

2014Zentrum Zentrum Mikroelektronik Dresden AG Rev.1.62 1.62 August 27,2014. 2014. Allrights rights reserved. Thematerial material contained herein may not bereproduced, reproduced, adapted, merged, translated, © 2014 Zentrum Mikroelektronik Dresden AG — Rev. 1.62 — August 27, 2014. All rights reserved. The material contained herein may may not be reproduced, adapted, merged, translated, ©©2014 Mikroelektronik Dresden AG ——Rev. ——August 27, All reserved. The contained herein not be adapted, merged, translated, stored, usedwithout without theprior priorwritten written consent thecopyright copyright owner. Theinformation information furnished thispublication publication subject changes without notice. stored, or used without the prior written consent of theofof copyright owner. The information furnished in this publication is subject to changes without notice. stored, ororused the consent the owner. The furnished inin this isissubject totochanges without notice.

0.1µF

ZSSC3122 ZSSC3122 cLite™ Low Voltage Capacitive Sensor Signal Conditioner cLite™ Low Voltage Capacitive Sensor Signal Conditioner

Sensor

(Optional)

MU VSS

Application: Analog Output ZSSC3122 cLite™ Low Voltage Capacitive Sensor Signal Conditioner ZSSC3122 cLite™ Low Voltage Capacitive Sensor Signal Conditioner

VDD (1.8V to 5.5V) VDD (1.8V to 5.5V) Vcore Vcore 0.1µF

ZSSC3122 ZSSC3122

Block Diagram Block Diagram

Temp Sensor Temp Sensor

0.1µF

Sensor Sensor C0 C0 C1 C1 (Optional) (Optional)

0.1µF

C/A C/A

C0 C0 CC C1

MUX MUX

Application: Analog Output Application: Analog Output VDD VDD Vcore Vcore VSS

GND GND

0.1µF CLK/Reset CLK/Reset

EEPROM EEPROM

VSS C0

V V

SUPPLY (+1.8V to 5.5V) SUPPLY (+1.8V to 5.5V)

PDM_C PDM_T PDM_T

Analog Core Analog Core

Alarm_High

ZSSC3122AI2*N ZSSC3122AI2*N ZSSC3122KIT ZSSC3122KIT

SCL/SCLK SDA/MISO SDA/MISO PDM_T Ready/PDM_C Ready/PDM_C Alarm_Low/PDM_T

High Alarm

Alarm_Low/PDM_T SS Alarm_High SS Alarm_High

High Alarm

Alarm_High

Ordering Codes Output

Digital Core Sales Code Digital Core

(+1.8V to 5.5V)

0.1µF 0.1µF

Communication Output Communication

SUPPLY (+1.8V to 5.5V)

Cap. Analog Output Temp Analog Output

LED

ZSSC3122AA1BN

ZSSC3122 Die — Temperature range: -20°

ZSSC3122AI3BN VDD

ZSSC3122 Die — Temperature range: -20°

VDD Vcore ZSSC3122AA3BN

ZSSC3122 ZSSC3122 cLite™ Die — Temperature range: -20°

0.1µF

Vcore

ZSSC3122AI1CN VSS C0

ZSSC3122 SDA/MISO Die — Temperature range: -20° SCL/SCLK

ZSSC3122AA2*N CC

Ready SDA/MISO SCL/SCLK

SS TSSOP14 — Temperature rang ZSSC3122 SS Alarm_High Alarm_High

C1 ZSSC3122AI2*N

Alarm_Low TSSOP14 — Temperature rang ZSSC3122

ZSSC3122KIT

ZSSC3122 SSC Evaluation Kit: Communic Board, USB Cable, 5 IC Samples (software

Description Description ZSSC3122 Die — Temperature range: -20°C to +125°C ZSSC3122 Die — Temperature range: -20°C to +125°C ZSSC3122 Die — Temperature range: -20°C to +85°C ZSSC3122 Die — Temperature range: -20°C to +85°C ZSSC3122 Die — Temperature range: -20°C to +85°C ZSSC3122 Die — Temperature range: -20°C to +85°C ZSSC3122 Die — Temperature range: -20°C to +125°C ZSSC3122 Die — Temperature range: -20°C to +125°C ZSSC3122 Die — Temperature range: -20°C to +125°C ZSSC3122 Die — Temperature range: -20°C to +125°C ZSSC3122 Die — Temperature range: -20°C to +85°C ZSSC3122 Die — Temperature range: -20°C to +85°C ZSSC3122 TSSOP14 — Temperature range: -20°C to +125°C – Lead-free package ZSSC3122 TSSOP14 — Temperature range: -20°C to +125°C – Lead-free package

ZSSC3122 Ready

ZSSC3122 Die — Temperature range: -20°

LED

cLite™

0.1µF ZSSC3122AA1CN VSS

GND GND

Ordering Codes Ordering Codes Sales Code Sales Code ZSSC3122AA1BN ZSSC3122AA1BN ZSSC3122AI1BN ZSSC3122AI1BN ZSSC3122AI3BN ZSSC3122AI3BN ZSSC3122AA3BN ZSSC3122AA3BN ZSSC3122AA1CN ZSSC3122AA1CN ZSSC3122AI1CN ZSSC3122AI1CN ZSSC3122AA2*N ZSSC3122AA2*N

Low Alarm

LED

PDM

Low Alarm

ROM ROM

VSUPPLY (+1.8V to 5.5V) VSUPPLY

Cap. Analog Cap. Output Analog Output Temp Analog Temp Output Analog Output

ZSSC3122 PDM_C

Alarm_High

VSS

PDM

I2C / SPI

DSP DSP

ZSSC3122 PDM_C SCL/SCLK

Ready

I C / SPI

D D

cLite™

Application: Differential Capacitance Input ZSSC3122AI1BN ZSSC3122 Die — Temperature range: -20° Application: Differential Capacitance Input

cLite™ ZSSC3122 cLite™

Vcore

0.1µF

Ready

CDC CDC

CC C1

VSS VSS

0.1µF 0.1µF

Offset Cap Offset Cap

GND 0.1µF

0.1µF 0.1µF

Ref Cap Ref Cap

VDD

Alarm_Low

Package

Sales Tested and Further Information Package dice on un-sawn wafer, 370µm

Tested dice on un-sawn wafer, 370µm Inc. Zentrum Mikroelektronik ZMD America, Tested dice on un-sawn wafer, 370µm Dresden AG 1525 McCarthy Blvd., #212 Tested dice on un-sawn wafer, 370µm Global Headquarters Milpitas, CA 95035-7453 Tested dice on un-sawn wafer, 725µm Grenzstrasse 28 dice on un-sawn wafer, USA 725µm Tested 01109 Dresden, TestedGermany dice on un-sawn wafer, 725µm Tested dice on un-sawn wafer, 725µm1.855.275.9634 USA Phone Central Office: Tested dice on frame, 370µm Phone +49.351.8822.306 Phone +1.408.883.6310 Tested dice on frame, 370µm Fax +49.351.8822.337 Fax +1.408.883.6358 Tested dice on frame, 370µm Tested dice on frame, 370µm Tube: substitute “T” for * in code Tube: substitute substitute “R” “T” for for ** in in code code Reel: EuropeanReel: Technical Support DISCLAIMER: This information app substitute “R” for * in code ZSSC3122 TSSOP14 — Temperature range: -20°C to +85°C – Lead-free package Tube: substitute “T” for * Zentrum in code Mikroelektronik Dresden A Phone +49.351.8822.7.772 information furnished hereby is be ZSSC3122 TSSOP14 — Temperature range: -20°C to +85°C – Lead-free package Tube: substitute substitute “R” “T” for for ** in in code code Reel: Fax +49.351.8822.87.772 licensee, or any other third party fo Reel: substitute “R” for * in code in any way related to the furnishing EuropeanKit Sales (Stuttgart) ZSSC3122 SSC Evaluation Kit: Communication Board, SSC Board, Sensor Replacement customer, licensee or any other thi Phone +49.711.674517.55 ZSSC3122 Evaluation Kit: Communication Board, SSC Board, Replacement Kit Board, USBSSC Cable, 5 IC Samples (software can be downloaded fromSensor www.zmdi.com/zssc3122) any damages in connection with or Fax +49.711.674517.87955 Board, USB Cable, 5 IC Samples (software can be downloaded from www.zmdi.com/zssc3122) tort (including negligence), strict liab

Sales and Further Information Sales and Further Information

www.zmdi.com www.zmdi.com

Zentrum Mikroelektronik Zentrum Dresden Mikroelektronik AG Dresden AG Global Headquarters Global Headquarters Grenzstrasse 28 Grenzstrasse 28 Germany 01109 Dresden, 01109 Dresden, Germany Central Office: Central Office: Phone +49.351.8822.306 Phone +49.351.8822.306 Fax +49.351.8822.337 Fax +49.351.8822.337

ZMD America, Inc. ZMD 1525 America, McCarthy Inc. Blvd., #212 1525 McCarthy Blvd., #212 Milpitas, CA 95035-7453 Milpitas, CA 95035-7453 USA USA

European Technical Support European Technical Support Phone +49.351.8822.7.772 Phone +49.351.8822.7.772 Fax +49.351.8822.87.772 Fax +49.351.8822.87.772 European Sales (Stuttgart) European Sales (Stuttgart) Phone +49.711.674517.55 Phone +49.711.674517.55 Fax +49.711.674517.87955 Fax +49.711.674517.87955

DISCLAIMER: This information applies to a product under development. Its characteristics and specifications are subject to change without notice. Zentrum Mikroelektronik Dresden AG (ZMD AG) assumes no obligation Its regarding future manufacture unlessare otherwise agreed to in writing. The DISCLAIMER: This information applies to a product under development. characteristics and specifications subject to change without notice. information furnished hereby is believed to be and accurate. However, underfuture no circumstances shall ZMD AG beagreed liable to in anywriting. customer, Zentrum Mikroelektronik Dresden AG (ZMD AG)true assumes no obligation regarding manufacture unless otherwise The licensee, or furnished any other hereby third party for any special, indirect, incidental,However, or consequential damages of any kind nature out of or information is believed to be true and accurate. under no circumstances shallorZMD AGwhatsoever be liable toarising any customer, in any wayorrelated to the furnishing, or use ofincidental, this technical data. ZMD AG hereby expressly liability of arising ZMD AG any licensee, any other third party for performance, any special, indirect, or consequential damages of any kinddisclaims or natureany whatsoever outtoof or customer, anyfurnishing, other thirdperformance, party, and any suchofcustomer, licensee any third party hereby waives liability of ZMD for in any waylicensee related toorthe or use this technical data.and ZMD AGother hereby expressly disclaims anyany liability of ZMD AG AG to any any damages in connection with or arising out of the furnishing, performance or use of this technical data, whether based on contract, warranty, customer, licensee or any other third party, and any such customer, licensee and any other third party hereby waives any liability of ZMD AG for tort (including or otherwise. any damages negligence), in connectionstrict withliability, or arising out of the furnishing, performance or use of this technical data, whether based on contract, warranty, tort (including negligence), strict liability, or otherwise.

USA Phone 1.855.275.9634 USA Phone 1.855.275.9634 Phone +1.408.883.6310 Phone +1.408.883.6310 Fax +1.408.883.6358 Fax +1.408.883.6358

Zentrum Mikroelektronik Zentrum Dresden Mikroelektronik AG, Japan Office Dresden Japan Tokyu Office Bldg. 2nd Floor,AG, Shinbashi 2nd Floor, Shinbashi Tokyu Bldg. 4-21-3, Shinbashi, Minato-ku 4-21-3, Shinbashi, Minato-ku Tokyo, 105-0004 Tokyo, Japan 105-0004 Japan Phone +81.3.6895.7410 Phone +81.3.6895.7410 Fax +81.3.6895.7301 Fax +81.3.6895.7301

SSC@zmdi.com SSC@zmdi.com

Phone +886.2.2377.8189 Phone +886.2.2377.8189 Fax +886.2.2377.8199 Fax +886.2.2377.8199

Zentrum Dresden Mikroelektronik AG, Korea Office Dresden Korea Office U-space 1AG, Building U-space 1 Building 11th Floor, Unit JA-1102 11th Floor, Unit JA-1102 670 Sampyeong-dong 670 Sampyeong-dong Bundang-gu, Seongnam-si Bundang-gu, Gyeonggi-do,Seongnam-si 463-400 Gyeonggi-do, 463-400 Korea Korea Phone +82.31.950.7679 Phone +82.504.841.3026 +82.31.950.7679 Fax Fax +82.504.841.3026

Sensor Interface IC Solutions

Products available at

ZMD FAR 3F, No. 51,EAST, Sec. 2,Ltd. 3F, No. 51, Sec. 2, Keelung Road Keelung Road 11052 Taipei 11052 TaiwanTaipei Taiwan

On-Line Store

15© Mikroelektronik Dresdenherein AG —may Rev. — June 13, adapted, 2014 All2014 rightsZentrum reserved. The material contained not1.61 be reproduced, merged, translated, stored, or used without the prior written consent of the copyright owner. All rights reserved. The material contained herein may not be reproduced, adapted, merged, translated, stored, or used without the prior written consent of the copyright owner.

ZSSC3123

cLite™ Capacitive Sensor Signal Conditioner

ZSSC3123

cLite™ Capacitive Sensor Signal Conditioner

Brief Description

Benefits

The ZSSC3123 is a CMOS integrated circuit for accurate capacitance-to-digital conversion and sensor-specific correction of capacitive sensor signals. Digital compensation of sensor offset, sensitivity, and temperature drift is accomplished via an internal digital signal processor running a correction algorithm with calibration coefficients stored in a non-volatile EEPROM. The ZSSC3123 is configurable for capacitive sensors with capacitances up to 260pF and a sensitivity of 125aF/LSB to 1pF/LSB depending on resolution, speed, and range settings. It is compatible with both single capacitive sensors (both terminals must be accessible) and differential capacitive sensors. Measured and corrected 2 sensor values can be output as I C™*, SPI, PDM, or alarms. 2 The I C™ interface can be used for a simple PC-controlled calibration procedure to program a set of calibration coefficients into an on-chip EEPROM. The calibrated ZSSC3123 and a specific sensor are mated digitally: fast, precise, and without the cost overhead of trimming by external devices or laser.



Minimized calibration costs: no laser trimming, onepass calibration using a digital interface



Wide capacitance range to support a broad portfolio of different sensor elements Excellent for low-power battery applications

Features   

    

Maximum Target input capacitance: 260pF Sampling rates as fast as 0.7ms at 8-bit resolution; 1.6ms at 10-bit; 5.0ms at 12-bit; 18.5ms at 14-bit st nd Digital compensation of sensor: piece-wise 1 and 2 rd order sensor compensation or up to 3 order singleregion sensor compensation st nd Digital compensation of 1 and 2 order temperature gain and offset drift Internal temperature compensation reference (no external components) Programmable capacitance span and offset Layout customized for die-die bonding with sensor for low-cost, high-density chip-on-board assembly † Accuracy as high as ±0.25% FSO@ -40 to 125°C, 3V, 5V, Vsupply ±10%



Interfaces 

I²C™ or SPI interface—easy connection to a µC



PDM outputs (Filtered Analog Ratiometric) for both capacitance and temperature



Up to two alarms that can act as full push-pull or opendrain switches

Physical Characteristics



Supply voltage: 2.3V to 5.5V Typical current consumption 650μA down to 60μA depending on configuration Typical Sleep Mode current: ≤ 1μA at 85°C

 

Operation temperature: –40°C to +125°C Die or TSSOP14 package

 

Available Support 

ZSSC3123 SSC Evaluation Kit available: SSC Evaluation Board, samples, software, documentation.

 

Support for industrial mass calibration available. Quick circuit customization option for large production volumes.

Application: Digital Output, Alarms

VSUPPLY

VDD

(2.3V to 5.5V)

0.1µF

Vcore

cLite™

ZSSC3123 Ready

VSS

GND

SDA/MISO SCL/SCLK SS

Alarm_High CC

Alarm_Low

* I2C™ is a registered trademark of NXP. † See data sheet section 1.3 for restrictions.

For more information, contact us at SSC@zmdi.com.

Visit .com for more detailed information

© 2013 Zentrum Mikroelektronik Dresden AG — Rev. 1.62 — December 11, 2013. All rights reserved. The material contained herein may not be reproduced, adapted, merged, translated, stored, or used without the prior written consent of the copyright owner. The information furnished in this publication is subject to changes without notice.

ZSSC3123

cLite™ Capacitive Sensor Signal Conditioner

0.1µF

Sensor

(Optional)

M VSS

ZSSC3123

Application: Analog Output

ZSSC3123 cLite™ Capacitive Sensor Signal Conditioner

Block Diagram

VDD (2.3V to 5.5V) Vcore

Temp Sensor

0.1µF

Ref Cap

cLite™

VDD

Offset Cap

EEPROM

CLK/Reset

Ready

ZSSC3123 SCL/SCLK

Vcore

0.1µF

PDM_C

SDA/MISO

PDM 0.1µF

Sensor

C/A

MUX

0.1µF

Alarm_High

VSUPPLY

cLite™

VSUPPLY

(+2.3V to 5.5V)

Alarm_High

Cap. Analog Output

0.1µF

Temp Analog Output

GND

PDM_T

LED

ZSSC3123 die — Temperature range: -40

ZSSC3123AI1B

ZSSC3123 die — Temperature range: -40 ZSSC3123

ZSSC3123AA1C

ZSSC3123 die — Temperature range: -40 Ready

ZSSC3123AI1CVSS

SDA/MISO ZSSC3123 die — Temperature range: -40

0.1µF

Vcore

cLite™

ZSSC3123AA2

ZSSC3123 TSSOP14 — Temperature ran

ZSSC3123AI2

ZSSC3123 TSSOP14 — Temperature ran

ZSSC3123 SSC Evaluation Kit: Communic Alarm_Low Board, USB Cable, 5 IC Samples (software

ZSSC3123KIT

Alarm_High

SCL/SCLK

Sales Code

Zentrum Mikroelektronik Dresden AG ZMD America, Inc. Global Headquarters Package 1525 McCarthy Blvd., #212 Grenzstrasse 28 Milpitas, CA 95035-7453 01109 Dresden, Germany Tested dice on un-sawn waferUSA

Description

ZSSC3123AA1B

ZSSC3123 die — Temperature range: -40°C to +125°C

ZSSC3123AI1B

ZSSC3123 die — Temperature range: -40°C to +85°C

ZSSC3123AA1C

ZSSC3123 die — Temperature range: -40°C to +125°C

ZSSC3123AI1C

ZSSC3123 die — Temperature range: -40°C to +85°C

Central Office: Tested dice on un-sawn waferUSA Phone +855.275.9634 Phone +49.351.8822.0 Fax +49.351.8822.600 Phone +408.883.6310 Tested dice on frame Fax +408.883.6358

Tested dice on frame

EuropeanTube: Technical DISCLAIMER: This information appli addSupport “T” to code; reel: add “R” Dresden AG (ZMD AG) assumes no Phone +49.351.8822.7.772 and accurate. However, under no c Fax +49.351.8822.87.772 Tube: add “T” to code; reel: add “R” consequential damages of any kind o

ZSSC3123AA2

ZSSC3123 TSSOP14 — Temperature range: -40°C to +125°C – Lead-free package

ZSSC3123AI2

ZSSC3123 TSSOP14 — Temperature range: -40°C to +85°C – Lead-free package

ZSSC3123KIT

Kit ZSSC3123 SSC Evaluation Kit: Communication Board, SSC Board, Sensor Replacement Phone +49.711.674517.55 Board, USB Cable, 5 IC Samples (software can be downloaded from www.zmdi.com/zssc3123) Fax +49.711.674517.87955

European Sales (Stuttgart)

Sales and Further Information

European Sales (Stuttgart) Phone +49.711.674517.55 Fax +49.711.674517.87955

Alarm_High

Sales and Further Information

Ordering Codes

European Technical Support Phone +49.351.8822.7.772 Fax +49.351.8822.87.772

ZMD America, Inc. 1525 McCarthy Blvd., #212 Milpitas, CA 95035-7453 USA USA Phone +855.275.9634 Phone +408.883.6310 Fax +408.883.6358

expressly disclaims any liability of ZM liability of ZMD AG for any damages (including negligence), strict liability,

www.zmdi.com Zentrum Mikroelektronik Dresden AG, Japan Office 2nd Floor, Shinbashi Tokyu Bldg. 4-21-3, Shinbashi, Minato-ku Tokyo, 105-0004 Japan Phone Fax

+81.3.6895.7410 +81.3.6895.7301

© 2013 Zentrum Mikroelektronik Dresden AG — Rev. 1.62 — Decembe SSC@zmdi.com All rights reserved. The material contained herein may not be reproduced, a ZMD FAR EAST, Ltd. Zentrum Mikroelektronik Dresden AG, Korea Office 3F, No. 51, Sec. 2, Keelung Road U-space 1 Building 11052 Taipei 11th Floor, Unit JA-1102 Taiwan 670 Sampyeong-dong Bundang-gu, Seongnam-si Gyeonggi-do, 463-400 Phone +886.2.2377.8189 Korea Fax +886.2.2377.8199 Phone +82.31.950.7679 Fax +82.504.841.3026

Sensor Interface IC Solutions

© 2013 Zentrum Mikroelektronik Dresden AG — Rev. 1.62 — December 11, 2013 All rights reserved. The material contained herein may not be reproduced, adapted, merged, translated, stored, or used without the prior written consent of the copyright owner.

ZSSC3123AA1B

VDD

(+2.3V to 5.5V)

Central Office: Phone +49.351.8822.0 Fax +49.351.8822.600

Output Communication

Digital Core

VSS

Zentrum Mikroelektronik Dresden AG Global Headquarters Grenzstrasse 28 01109 Dresden, Germany

Temp Analog Output

Ordering Codes

PDM_C

High Alarm

Cap. Analog Output

Application: Differential Capacitance Input Sales Code

ZSSC3123

GND

Low Alarm C0

Analog Core

Application: Analog Output

0.1µF

Ready/PDM_C Alarm_Low/PDM_T PDM_T

ROM

VSS

Vcore

DSP

CDC

(Optional)

VDD

VSS

I2C / SPI

GND

SUPP (+2.3V to 5.5

Products available at

On-Line Store

ZSC31050

Advanced Differential Sensor Signal Conditioner

ZSC31050

Advanced Differential Sensor Signal Conditioner

Brief Description

Features

ZSC31050 is a CMOS integrated circuit for highly accurate amplification and sensor-specific correction of bridge sensor and temperature sensor signals. The device provides digital compensation of sensor offset, sensitivity, temperature drift, and non-linearity via a 16-bit RISC microcontroller running a polynomial correction algorithm. The ZSC31050 accommodates virtually any bridge sensor type (e.g., piezo-resistive, ceramic thick-film, or steel membrane based). In addition, it can interface to a separate temperature sensor. The bi-direc2 tional digital interfaces (I C™*, SPI, and ZACwire™) can be used for a simple PC-controlled one-pass calibration procedure to program a set of calibration coefficients into an on-chip EEPROM. A specific sensor and a ZSC31050 can be mated digitally: fast, precise and without the cost overhead associated with trimming by external devices or laser. The ZACwire™ interface enables an end-of-line calibration of the sensor module. Typical applications for the ZSC31050 include industrial, medical, and consumer products. It is specifically engineered for most resistive bridge sensors; e.g., sensors for measuring pressure, force, torque, acceleration, angle, position, and revolution.

Benefits  No external trimming components required  PC-controlled configuration and calibration via

digital bus interface – simple, low cost  High accuracy (±0.1% FSO @ -25 to 85°C; † ±0.25% FSO @ -40 to 125°C)

Available Support  Evaluation kit available

 Digital compensation of sensor offset, sensitivity,

temperature drift, and nonlinearity

 Accommodates nearly all resistive bridge sensor

types (signal spans from 1mV/V up to 275mV/V)

 Digital one-pass calibration: quick and precise  Selectable compensation temperature source: 

     

bridge, thermistor, or internal or external diode Output options: voltage (0 to 5V), current 2 (4 to 20mA), PWM, I C™, SPI, ZACwire™ (one-wire interface), alarm Adjustable output resolution (up to 15 bits) versus sampling rate (up to 3.9kHz) Current consumption: 2.5mA (typical) Selectable bridge excitation: ratiometric voltage, constant voltage, or constant current Input channel for separate temperature sensor Sensor connection and common mode check (sensor aging detection) AEC-Q100 qualification (temperature grade 0)

Physical Characteristics  Operation temperature -40 to +125°C (-40 to

+150°C de-rated, depending on product version)

 Supply voltage: 2.7 to 5.5 V; with external JFET:

5 to 40 V

 Available in SSOP16 package or as die

ZSC31050 Overview VCC

Sensor Module

ZSC31050

OUT

 Support for industrial mass calibration available  Quick circuit customization possible for large

production volumes

GND

* I2C™ is a trademark of NXP. † Digital output signal.

For more information, contact ZMDI via PRODUCT@ZMDI.COM.

Visit .com for more detailed information

© 2015 Zentrum Mikroelektronik Dresden AG — Rev. 1.21 —July 27, 2015. All rights reserved. The material contained herein may not be reproduced, adapted, merged, translated, stored, or used without the prior written consent of the copyright owner. The information furnished in this publication is subject to changes without notice.

ZSC31050

Advanced Differential Sensor Signal Conditioner

External Temperature Sensor

Sensor Bridge IN3

Typical Applications:

ZSC31050 Block Diagram

Consumer Goods

Weight scales Flow meters Strain gauges Load meters SCL HVACSDA



  

Ext. Temp. Sens.

IR_TEMP

CTRL-REGS

VBR Gain Factor

VINP



VINN

PGA

Temp. Sens. Select

MUX

SIF

RAM

ADC

Typical Applications:

DAC

FIO1

PWM

FIO2

Product Sales Code

EEPROM

ZSC31050FEB

Digital Section

Sensor Bridge IN3

ZSC31050FEC

Interfaces

    

Weight scales Flow meters Strain gauges Load meters HVAC

Industrial Applications   

4-20mA transmitters Intelligent sensor networks Process automation Factory automation

OUT / OWI

Description IO1

IO2 ZSC31050 Die — Tem

ZSC31050 Die — Tem ZSC31050 SSOP-16

ZSC31050FEG1 Consumer Goods



Ordering Information (Please refer to sectio

CMC

Int. Temp. Sensor

External Temperature Sensor



PCOMP

ADC Mode Offset Shift

Analog Front-End (AFE)



Portable Devices Automotive Sensors* ZSC31050KIT Evaluation Modular ZSC31050 S Kit V3.1 boards, five ZSC3105  Altimeters  Oil pressure 

Blood pressure ZSC31050 monitors



Temperature sensing

Mass  Strain gauges Modular Mass Calibra Calibration System V1.1 boards, cable, connec * AEC-Q100 qualified

Sales and Further Information Ordering Information (Please refer to section 8 in the data sheet for additional options.) Product Sales Code

Description

ZSC31050FEB

ZSC31050 Die — Temperature range: -40°C to +150°C

ZSC31050FEC

ZSC31050 Die — Temperature range: -40°C to +150°C

ZSC31050FEG1

ZSC31050 SSOP-16 — Temperature range: -40°C to

Zentrum Mikroelektronik Dresden AG Package Global Headquarters Unsawn on Grenzstrasse 28 01109 Dresden, Germany

ZMD America, Inc. 1525 McCarthy Blvd., #212 Milpitas, CA 95035-7453 Wafer USA

Frame Phone 1.855.275.9634 Central Office: Sawn on Wafer USA Phone +49.351.8822.306 Phone +1.408.883.6310 +150°C Tube: add “-T” to sales+1.408.883.6358 code Fax +49.351.8822.337 Fax Reel: add “-R”

ZSC31050KIT Evaluation Kit V3.1

European Technical Modular ZSC31050 SSC Evaluation Kit: three interconnecting Kit Support Phone +49.351.8822.7.772 boards, five ZSC31050 SSOP-16 samples

ZSC31050 Mass Calibration System V1.1

Modular Mass Calibration System (MSC) for ZSC31050:European MCS Sales Kit(Stuttgart) Phone +49.711.674517.55 boards, cable, connectors

Sales and Further Information

www.zmdi.com

Fax

+49.351.8822.87.772

Fax

+49.711.674517.87955

DISCLAIMER: This information ap Zentrum Mikroelektronik Dresden information furnished hereby is b licensee, or any other third party in any way related to the furnishin customer, licensee or any other th any damages in connection with tort (including negligence), strict li

PRODUCT@ZMDI.COM

Zentrum Mikroelektronik Dresden AG Global Headquarters Grenzstrasse 28 01109 Dresden, Germany

ZMD America, Inc. 1525 McCarthy Blvd., #212 Milpitas, CA 95035-7453 USA

Central Office: Phone +49.351.8822.306 Fax +49.351.8822.337

USA Phone 1.855.275.9634 Phone +1.408.883.6310 Fax +1.408.883.6358

European Technical Support Phone +49.351.8822.7.772 Fax +49.351.8822.87.772

European Sales (Stuttgart) Phone +49.711.674517.55 Fax +49.711.674517.87955

Zentrum Mikroelektronik Dresden AG, Japan Office 2nd Floor, Shinbashi Tokyu Bldg. 4-21-3, Shinbashi, Minato-ku Tokyo, 105-0004 Japan

ZMD FAR EAST, Ltd. 3F, No. 51, Sec. 2, Keelung Road 11052 Taipei Taiwan

Phone +81.3.6895.7410 Fax +81.3.6895.7301

Phone +886.2.2377.8189 Fax +886.2.2377.8199

Zentrum Mikroelektronik Dresden AG, Korea Office U-space 1 Building Unit B, 906-1 660, Daewangpangyo-ro Bundang-gu, Seongnam-si Gyeonggi-do, 463-400 Korea Phone +82.31.950.7679 Fax +82.504.841.3026

Sensor Interface IC Solutions

Products available at

On-Line Store

ZSC31150 ZSC31150

Fast Fast Automotive Automotive Sensor Sensor Signal Signal Conditioner Conditioner

ZSC31150

Fast Automotive Sensor Signal Conditioner

Brief Brief Description Description

Benefits Benefits

The The ZSC31150 ZSC31150 is is a a CMOS CMOS integrated integrated circuit circuit forfor highlyaccurate accurateamplification amplificationand andsensor-specific sensor-specific highly correction bridge sensorsignals. signals. Digitalcomcomcorrection of ofbridge sensor Digital pensation sensor offset, sensitivity, temperature pensation of of sensor offset, sensitivity, temperature drift, non-linearity is accomplished interdrift, andand non-linearity is accomplished viavia an an inter16-bit RISC microcontroller running a correction nalnal 16-bit RISC microcontroller running a correction algorithm, with calibration coefficients stored algorithm, with calibration coefficients stored in in an an EEPROM. EEPROM.

 NoNo external external trimming trimming components components required required

The ZSC31150 is adjustable to nearly bridge senThe ZSC31150 is adjustable to nearly all all bridge sentypes. Measured values provided sorsor types. Measured values areare provided at at thethe analog voltage output digital ZACwire™ analog voltage output or or at at thethe digital ZACwire™ I²C™* interface. The digital interface andand I²C™* interface. The digital interface cancan be be used a simple PC-controlled calibration proceused forfor a simple PC-controlled calibration procedure order program a set calibration coeffidure in in order to to program a set of of calibration coefficients on-chip EEPROM. A specific sensor cients intointo an an on-chip EEPROM. A specific sensor ZSC31150cancanbe bemated mateddigitally: digitally:fast, fast, andanda aZSC31150 precise, without cost overhead associated precise, andand without thethe cost overhead associated with trimming external devices orlaser. a laser. with trimming by by external devices or a

 Digital Digital compensation compensation of sensor of sensor offset, offset, sensitivity, sensitivity,   

        

temperature temperature drift, drift, andand non-linearity non-linearity Adjustable Adjustable to nearly to nearly all all bridge bridge sensor sensor types types Analog Analog gain gain of up of up to 420 to 420 Output Output options: options: ratiometric ratiometric analog analog voltage voltage output output (5% (5% to 95% to 95% maximum, maximum, 12.4-bit 12.4-bit resolution) resolution) or or ZACwire™ ZACwire™ (digital (digital one-wire-interface) one-wire-interface) Temperature Temperature compensation: compensation: internal internal or external or external diode, diode, bridge bridge resistance, resistance, thermistor thermistor Sensor Sensor biasing biasing by by voltage voltage or constant or constant current current Sample Sample rate: rate: up up to 7.8kHz to 7.8kHz High High voltage voltage protection protection up up to 33V to 33V Supply Supply current: current: max. max. 5.5mA 5.5mA Reverse Reverse polarity polarity andand short-circuit short-circuit protection protection Wide Wide operation operation temperature temperature depending depending on on part part number: number: up up to -40 to -40 to +150°C to +150°C Traceability Traceability by by user-defined user-defined EEPROM EEPROM entries entries Safety Safety andand diagnostic diagnostic functions functions

 PC-controlled PC-controlled configuration configuration andand single single pass pass

calibration calibration viavia I²C™ I²C™ or ZACwire™ or ZACwire™ interface: interface: simple, simple, cost cost efficient, efficient, quick, quick, andand precise precise  End-of-line End-of-line calibration calibration viavia I²C™ I²C™ or ZACwire™ or ZACwire™ interface interface  High High accuracy accuracy (0.25% (0.25% FSO FSO @@ -25-25 to 85°C; to 85°C; 0.5% 0.5% FSO FSO @@ -40-40 to 125°C) to 125°C)  Excellent Excellent EMC/ESD EMC/ESD robustness robustness andand AEC-Q100 AEC-Q100 qualification qualification

Available Available Support Support  Evaluation Evaluation KitsKits  Application Application Notes Notes  Mass Mass Calibration Calibration System System

Physical Physical Characteristics Characteristics  Supply Supply voltage: voltage: 4.54.5 to 5.5 to 5.5 V V  Operation Operation temperature: temperature: -40°C -40°C to 125°C to 125°C

(-40°C (-40°C to +150°C to +150°C extended extended temperature temperature range) range)

 Available Available as as DFN14 DFN14 (5mm (5mm x 4mm; x 4mm; wettable wettable

flanks), flanks), SSOP14, SSOP14, andand diedie

ZSC31150 ZSC31150 Application Application Circuit Circuit Out / OWI Out / OWI

C3 47nF

Sensor Sensor BridgeBridge

8 VSSE 8 VSSE

7 7 VDDEVDDE

9 AOUT 9 AOUT

6 6 VDD VDD

ZSC31150 ZSC31150

Features Features

 Only Only a few a few external external protection protection devices devices needed needed

10 VBN 10 VBN

C5 C4

GND GND

C2 C2 100nF 100nF

+4.5V +4.5V to +5.5V to +5.5V

VSUPPVSUPP

5 5 n.c. n.c.

11 VBR_B 11 VBR_B

4 4 SCL SCL

SCL SCL

12 VBP 12 VBP

3 3 SDA SDA

SDA SDA

13 VBR_T 13 VBR_T

2 2 VSSAVSSA

14 IRTEMP 14 IRTEMP

1 1 VDDAVDDA

SerialSerial Interface Interface

C1 C1 100nF 100nF

Temperature Temperature Sensor Sensor

* I²C™ * I²C™ is a is trademark a trademark of NXP. of NXP.

Visit .com for more detailed information

ForFor more more information, information, contact contact ZMDI ZMDI viavia PRODUCT@ZMDI.COM. PRODUCT@ZMDI.COM.

© 2015 © 2015 Zentrum Zentrum Mikroelektronik Mikroelektronik Dresden Dresden AG — AGRev. — Rev. 2.41— 2.41— JulyJuly 27, 2015 27, 2015 All rights All rights reserved. reserved. The The material material contained contained herein herein may may not be notreproduced, be reproduced, adapted, adapted, merged, merged, translated, translated, 20 stored, stored, or used or used without without the prior the prior written written consent consent of the ofcopyright the copyright owner. owner. The The information information furnished furnished in this in publication this publication is subject is subject to changes to changes without without notice. notice.

PGA

ZSC31150

Fast Automotive Sensor Signal Conditioner TS

Ordering Information

ZSC31150 Block Diagram

PGA

MUX

RAM

ADC

TS Analog Block

DAC

ROM

Ordering Information Sales Code

Description

ZSC31150GE

ZSC31150 Die — Temperature range: -40°C to +150°C

ZSC31150GEG2-R

ZSC31150 DFN14 (5mmx4mm; wettable flanks) —Temperature range: -40°C to 150°C

ZSC31150GAG2-R

ZSC31150 DFN14 (5mmx4mm; wettable flanks) —Temperature range: -40°C to 125°C

ZSC31150GEG1

ZSC31150 SSOP14—Temperature range: -40°C to +150°C

ZSC31150GLG1

ZSC31150 SSOP14—Temperature range: -40°C to +150°C (Long life: 5000h @150°C)

ZSC31150GAG1

ZSC31150 SSOP14—Temperature range: -40°C to +125°C

ZSC31150 Mass Calibration System V1.1

ZSC31150GE

ZSC31150 Die — Temperatu

ZSC31150GAG2-R BAMP

Digital Data I/O

ZSC31150 SSOP14—Tempe

ZSC31150GLG1

ZSC31150 SSOP14—Tempe (Long life: 5000h @150°C)

ZSC31150GAG1

ZSC31150 SSOP14—Tempe

ZSC31150KIT Evaluation Kit V1.2

ZSC31150 SSC Evaluation K USB cable (software can be

Package

ZSC31150 Mass Modular Mass Calibration Sy Calibration V1.1“B”(software can be downloaded Unsawn onSystem Wafer: add to sales code Sawn on Wafer Frame: add “C” Waffle Pack: add “D”

Sales and Further Information Tape & Reel Zentrum Mikroelektronik Dresden AG Tape & Reel Global Headquarters Grenzstrasse 28 01109 Dresden, Germany

ZMD America, Inc. 1525 McCarthy Blvd., #212 Milpitas, CA 95035-7453 USA

Tube: add “-T” to sales code USA Phone 1.855.275.9634 Central Office: Tape & Reel: add “-R” Phone +49.351.8822.306 Phone +1.408.883.6310 Fax +49.351.8822.337 Fax +1.408.883.6358

USB cable (software can be downloaded from product page at www.zmdi.com/zsc31150) European Sales (Stuttgart)

+49.711.674517.55 Modular Mass Calibration System (MSC) for ZSC31150: MCS boards,Phone cable, connectors Fax +49.711.674517.87955 (software can be downloaded from product page)

www.zmdi.com

range: -40°C to 125°C

ZSC31150GEG1

European Technical Support Phone +49.351.8822.7.772 ZSC31150 SSC Evaluation Kit: three interconnecting boards, five ZSC31150 SSOP14 samples, Fax +49.351.8822.87.772

Sales and Further Information

ZSC31150 DFN14 (5mmx4m range: -40°C to 150°C

Analog ZSC31150 DFN14 (5mmx4m Out

ZSC31150

Digital Block

ZSC31150KIT Evaluation Kit V1.2

Description

ZACwire™ I2C™ ZSC31150GEG2-R

EEPROM

CMC

Sales Code

DISCLAIMER: This information ap Zentrum Mikroelektronik Dresden information furnished hereby is b licensee, or any other third party in any way related to the furnishin customer, licensee or any other t any damages in connection with tort (including negligence), strict li

Zentrum Mikroelektronik Dresden AG Global Headquarters Grenzstrasse 28 01109 Dresden, Germany

ZMD America, Inc. 1525 McCarthy Blvd., #212 Milpitas, CA 95035-7453 USA

Central Office: Phone +49.351.8822.306 Fax +49.351.8822.337

USA Phone 1.855.275.9634 Phone +1.408.883.6310 Fax +1.408.883.6358

European Technical Support Phone +49.351.8822.7.772 Fax +49.351.8822.87.772

European Sales (Stuttgart) Phone +49.711.674517.55 Fax +49.711.674517.87955

Zentrum Mikroelektronik Dresden AG, Japan Office 2nd Floor, Shinbashi Tokyu Bldg. 4-21-3, Shinbashi, Minato-ku Tokyo, 105-0004 Japan

ZMD FAR EAST, Ltd. 3F, No. 51, Sec. 2, Keelung Road 11052 Taipei Taiwan

Phone +81.3.6895.7410 Fax +81.3.6895.7301

Phone +886.2.2377.8189 Fax +886.2.2377.8199

Zentrum Mikroelektronik Dresden AG, Korea Office U-space 1 Building Unit B, 906-1 660, Daewangpangyo-ro Bundang-gu, Seongnam-si Gyeonggi-do, 463-400 Korea Phone +82.31.950.7679 Fax +82.504.841.3026

Sensor Interface IC Solutions

© 2015 Zentrum Mikroelektronik Dresden AG — Rev. 2.41— July 27, 2015 All rights reserved. The material contained herein may not be reproduced, adapted, merged, translated, stored, or used without the prior written consent of the copyright owner.

Products available at

On-Line Store

ZSSC3015

RBicdLite-Auto™ Sensor Signal Conditioner with Diagnostics

ZSSC3015

RBicdLite-Auto™ Sensor Signal Conditioner with Diagnostics

Brief Description

Benefits

The ZSSC3015 sensor signal conditioner is adjustable to nearly all piezo-resistive bridge sensors. Measured and corrected bridge values are provided at the Sig™ pin, which can be configured as an analog voltage output or as a one-wire serial digital output.



No external trimming components required



PC-controlled configuration and calibration via ZACwire™ one-wire interface – simple, low cost



High accuracy (as high as ±0.1% FSO @ -25 to 85°C; ±0.25% FSO @ -50 to 150°C)



Single-pass calibration – quick and precise

The ZACwire™ digital one-wire interface (OWI) can be used for a simple PC-controlled calibration procedure to program a set of calibration coefficients into an on-chip EEPROM. The calibrated ZSSC3015 and a specific sensor are mated digitally: fast, precise, and without the cost overhead associated with trimming by external devices or laser. Integrated diagnostics functions make the ZSSC3015 IC particularly well suited for automotive applications.

Features  



    

Digital compensation of sensor offset, sensitivity, temperature drift, and nonlinearity Programmable analog gain and digital gain; accommodates bridges with spans < 1mV/V and high offset Many diagnostic features on chip (e.g., EEPROM signature, bridge connection checks, bridge short detection, power loss detection) Independently programmable high and low clipping levels 24-bit customer ID field for module traceability Internal temperature compensation reference (no external components) Option for external temperature compensation with addition of single diode Output options: rail-to-rail ratiometric analog voltage (12-bit resolution), absolute analog voltage, ZACwire™ digital one-wire interface Fast power-up to data out response; output available 5ms after power-up Current consumption depends on programmed sample rate and mode: 1mA down to 300µA (typ.) Fast response time: 1.4ms typical High voltage protection: ≤ 30V with external JFET AEC-Q100 qualified

Visit .com for more detailed information

Available Support 

Evaluation Kit available



Mass Calibration System available



Support for industrial mass calibration available



Quick circuit customization possible for large production volumes

Physical Characteristics 

Wide operation temperature: –50°C to +150°C



Supply voltage 2.7 to 5.5V; with external JFET, 5.5 to 30V



Small SOP8 package

ZSSC3015 Application Circuit Vsupply

+2.7 to +5.5 V

VDD Sig™

OUT/OWI

ZSSC3015

VBP

Vgate VBN VSS

0.1 F Ground

For more information, contact ZMDI via SSC@zmdi.com.

© 2013 Zentrum Mikroelektronik Dresden AG — Rev. 1.11 —December 11, 2013 All rights reserved. The material contained herein may not be reproduced, adapted, merged, translated, stored, or used without the prior written consent of the copyright owner. The information furnished in this publication is subject to changes without notice.

 Building Automation

ZSSC3015

 Office Automation

Optional Ext. Diode for Temp

 White Goods

RBicdLite-Auto™ Sensor Signal Conditioner with Diagnostics

 Automotive  Portable Devices  Your Innovative Designs

JFET1 (Optional if supply is 2.7 to 5.5 V) S

0.1 F

Highly Versatile Applications in Many Markets Including  Building Automation

PTAT

Temperature Reference

Vgate

Voltage Reference

(Optional)

Bsink

 Automotive

INMUX

PREAMP

Power Save

EEPROM with Charge Pump

POR/Oscillator

 Portable Devices  Your Innovative Designs

Analog Block Digital Block

2 VBP

SigTM 7

3 ExtTemp 4 VBN

ZACwireTM Interface

Power Lost Diagnostic

Des

ZSSC3015 Die — Temperature range: -50°

ZSSC3015NE2T(R) ZSSC3015 SOP8 (150 mil) — Temperature BSS169 S

2 VBP

OUT

VDD 6

3 ExtTemp

Vsupply

+5.5 to +30 V ZSSC3015 SSC Evaluation Kit: Communic 8 Board, USB cable, 5 IC samples, instructio

ZSSC3015KIT VSS

SigTM 7

OUT

VDD 6

Sales and Vgate Further Information VBN

Vgate 5

0.1 F

Optional Bsink

Ground

Part Ordering Examples (See section 11 in the data sheet for additional options.) Sales Code ZSSC3015NE1B

0.1 F

Rail-to-Rail OWI/ZACwireTM

ZSSC3015 Die — Temperature range: -50° Absolute AnalogZSSC3015NE1C Voltage Output Applications

1 Bsink

ZSSC3015

Optional Bsink

0 V to 1 V

OUTBUF1ZSSC3015 Ratiometric

14-Bit ADC Digital Core

Vgate SigTM 5

4 VBN

Sales Code

VSS

Vsupply VSS 8

VDD 6

Part Ordering Examples (See section 11 in the dat

+2.7 to +5.5 V 1 Bsink

SigTM 7

Optional Bsink

ZSSC3015NE1B

Rail-to-Rail Ratiometric Voltage Output Applications

VSS 8

12-Bit 2 VBP DAC

ZSSC3015

VBN ExtTemp

1 Bsink

RBicdLite-Auto

3 ExtTemp

VBP Optional Ext. Diode for Temp

5.5 V to 30 V VSUPPLY

VDD (2.7 to 5.5 V)

Sensor Diagnostics

 Industrial

 White Goods

Rail-to-Rail Ratiometric Voltage Output Appli

ZSSC3015 Block Diagram

 Office Automation

Zentrum Mikroelektronik ZSSC3015 Dresden AG Global Headquarters Grenzstrasse 28 01109 Dresden, Germany

0.1 FZMD

America, Inc. 1525 McCarthy Blvd., #212 Ground Milpitas, CA 95035-7453 USA

USA Phone +855.275.9634 Central Office: Phone +49.351.8822.0 +408.883.6310 PackagePhone Fax +49.351.8822.600 Fax +408.883.6358 Unsawn on Wafer

Description ZSSC3015 Die — Temperature range: -50°C to +150°C

Sawn on Wafer Frame European Technical Support DISCLAIMER: This information ap Zentrum Mikroelektronik Dresden Phone +49.351.8822.7.772 ZSSC3015NE2T(R) ZSSC3015 SOP8 (150 mil) — Temperature range: -50°C to +150°C Tube: add “-T” to sales code. Reel: add “-R” hereby is be information furnished Fax +49.351.8822.87.772 licensee, or any other third party f ZSSC3015KIT ZSSC3015 SSC Evaluation Kit: Communication Board, SSC Board, Sensor Replacement Kit Sales (Stuttgart) in any way related to the furnishing European Board, USB cable, 5 IC samples, instructions for downloading SSC Evaluation Software customer, licensee or any other th Phone +49.711.674517.55 any damages in connection with o Fax +49.711.674517.87955 tort (including negligence), strict lia ZSSC3015NE1C

ZSSC3015 Die — Temperature range: -50°C to +150°C

Sales and Further Information

www.zmdi.com

SSC@zmdi.com

Zentrum Mikroelektronik Dresden AG Global Headquarters Grenzstrasse 28 01109 Dresden, Germany

ZMD America, Inc. 1525 McCarthy Blvd., #212 Milpitas, CA 95035-7453 USA

Central Office: Phone +49.351.8822.0 Fax +49.351.8822.600

USA Phone +855.275.9634 Phone +408.883.6310 Fax +408.883.6358

European Technical Support Phone +49.351.8822.7.772 Fax +49.351.8822.87.772

European Sales (Stuttgart) Phone +49.711.674517.55 Fax +49.711.674517.87955

Zentrum Mikroelektronik Dresden AG, Japan Office 2nd Floor, Shinbashi Tokyu Bldg. 4-21-3, Shinbashi, Minato-ku Tokyo, 105-0004 Japan

ZMD FAR EAST, Ltd. 3F, No. 51, Sec. 2, Keelung Road 11052 Taipei Taiwan

Phone +81.3.6895.7410 Fax +81.3.6895.7301

Phone +886.2.2377.8189 Fax +886.2.2377.8199

Sensor Interface IC Solutions

© 2013 Zentrum Mikroelektronik Dresden AG — Rev. 1.11—December 11, 2013 All rights reserved. The material contained herein may not be reproduced, adapted, merged, translated, stored, or used without the prior written consent of the copyright owner. 23

Products available at

On-Line Store

ZSSC3131 ZSSC3131

Sensor Signal Signal Conditioner Conditioner for for Cost-Optimized Cost-Optimized Switch Switch Applications Applications Sensor

ZSSC3131

Sensor Signal Conditioner for Cost-Optimized Switch Applications

Brief Description Description Brief

Benefits Benefits

The ZSSC3131 ZSSC3131 is is aa member member of of the the ZSSC313x ZSSC313x The product family family of of CMOS CMOS integrated integrated circuits circuits designed designed product for automotive/ automotive/ industrial industrial sensor sensor applications. applications. All All for family members are well suited for highly-accurate family members are well suited for highly-accurate amplification and and sensor-specific sensor-specific correction correction of of amplification resistive bridge sensor signals. An internal 16-bit resistive bridge sensor signals. An internal 16-bit RISC microcontroller microcontroller running running aa correction correction algorithm algorithm RISC compensates sensor sensor offset, offset, sensitivity, sensitivity, temperature temperature compensates drift, and and non-linearity non-linearity of of the the connected connected sensor sensor drift, element. The required calibration coefficients are element. The required calibration coefficients are stored by the one-pass calibration procedure in an stored by the one-pass calibration procedure in an on-chip EEPROM. EEPROM. on-chip

Family approach approach offers offers the the best best fitting fitting IC IC selecselec Family

The ZSSC3131 ZSSC3131 is is optimized optimized for for simple simple switch switch and and The cost-sensitive sensor sensor applications. applications. The The integrated integrated cost-sensitive adjustable digital digital filter filter enables enables building building fast-switchfast-switchadjustable ing real-time applications as well as stabilized ing real-time applications as well as stabilized applications for switching input signals that are are applications for switching input signals that unstable or or disrupted. disrupted. unstable

Features Features

   

     

of-line calibration calibration via via I²C™* I²C™* or or ZACwire™ ZACwire™ of-line interface: Simple, cost-efficient, quick, and and prepreinterface: Simple, cost-efficient, quick, cise cise  High accuracy accuracy (0.25% (0.25% FSO** FSO**@ @ -25 -25 to to +85°C; +85°C;  High 0.5% FSO @ -40 to +125°C) 0.5% FSO @ -40 to +125°C) Optimized for for automotive/industrial automotive/industrial environments environments  Optimized due to robust protection circuitries, excellent due to robust protection circuitries, excellent electromagnetic compatibility, compatibility, and and AEC-Q100 AEC-Q100 electromagnetic qualification qualification

Available Support Support Available Evaluation Kits Kits  Evaluation  Application Notes  Application Notes

Mass Calibration Calibration System System  Mass

Adjustable to to nearly nearly all all resistive resistive bridge bridge sensor sensor  Adjustable  

tion to to build build cost-optimized cost-optimized applications applications tion

No external external trimming trimming components components required required  No Low number number of of external external components components needed needed  Low PC-controlled configuration configuration and and One-Pass/ One-Pass/ endend PC-controlled

types: maximum maximum analog analog gain gain of of 105; 105; maximum maximum types: overall gain of 420 overall gain of 420 Sample rate rate up up to to 200 200 Hz Hz Sample ADC resolution 13/14 bit ADC resolution 13/14 bit Internal temperature temperature compensation compensation Internal Integrated adjustable adjustable digital digital filter filter Integrated Digital compensation compensation of of sensor sensor offset, offset, sensitivity, sensitivity, Digital temperature drift, drift, and and non-linearity non-linearity temperature Output options: options: ratiometric ratiometric analog analog voltage voltage output output Output (5 -- 95% 95% maximum, maximum, 12.4 12.4 bit bit resolution) resolution) or or (5 TM (digital One-Wire One-Wire Interface Interface (OWI)) (OWI)) ZACwireTM (digital ZACwire Sensor biasing biasing by by voltage voltage Sensor High voltage voltage protection protection up up to to 33 33 VV High Supply current: current: Max. Max. 5.5mA 5.5mA Supply Reverse polarity polarity and and short short circuit circuit protection protection Reverse Wide operation temperature range: Wide operation temperature range: -40 to to +150°C +150°C -40 Traceability by by user-defined user-defined EEPROM EEPROM entries entries Traceability

Physical Characteristics Characteristics Physical Supply voltage voltage 4.5 4.5 to to 5.5 5.5 VV  Supply Operation temperature: temperature: -40°C -40°C to to +125°C +125°C  Operation

(-40°C to to +150°C +150°C extended extended temperature temperature range range (-40°C depending on product version) depending on product version) Available in in RoHS-compliant RoHS-compliant JEDEC-SSOP14 JEDEC-SSOP14  Available package or delivery as die package or delivery as die ZSSC3131 Minimum Minimum Application Application Requirements Requirements ZSSC3131 VCC VCC Sensor Sensor Module Module

ZSSC3131 ZSSC3131

OUT OUT

GND GND

Note:I2I C™ C™isisaatrademark trademarkof ofNXP. NXP. ** Note: FSO==Full FullScale ScaleOutput. Output. **** FSO

For more more information, information, contact contact ZMDI ZMDI via via PRODUCT@ZMDI.COM. PRODUCT@ZMDI.COM. For

Visit .com for more detailed information

2015Zentrum ZentrumMikroelektronik MikroelektronikDresden DresdenAG AG— —Rev.1.24 Rev.1.24— —April April10, 10,2015. 2015. All Allrights rightsreserved. reserved.The Thematerial materialcontained containedherein hereinmay maynot notbe bereproduced, reproduced,adapted, adapted,merged, merged,translated, translated, ©©2015 stored,or orused usedwithout withoutthe theprior priorwritten writtenconsent consentof ofthe thecopyright copyrightowner. owner.The Theinformation informationfurnished furnishedininthis thispublication publicationisissubject subjecttotochanges changeswithout withoutnotice. notice. stored,

ZSSC3131

Sensor Bridge

Sensor Signal Conditioner for Cost-Optimized Switch Applications

ZSSC3131 Switch Application Example

Out

VDDE 7

9 AOUT

VDD 6

10 VBN 11 VBR_B 12 VBP

ZSSC3131

Sensor Bridge

VSSA 2

14 N.C.

VDDA 1

Sales Code VSUPP

R1 2kΩ

ZSSC3131 die – tested; tem

ZSSC3131BA1 12 VSUPP

Out

13 GPIO

ZSSC3131 SSOP14 – temp

ZSSC3131BE2 14 GND

C1 100nF

ZSSC3131BA2

ZSSC3131 SSOP14 – temp

ZSSC313xKITV1.1

ZSSC313x Evaluation Kit, r ZSSC3131 IC samples, US the product page www.zmd

ZSSC313x Mass Ordering Information (See data sheet section 8 for complete delivery options.) Calibration System V1.1

Product Sales Code

Description

ZSSC3131BE1

ZSSC3131 die – tested; temperature range -40 to +150°C

ZSSC3131BA1

ZSSC3131 die – tested; temperature range -40 to +125°C

ZSSC3131BE2

ZSSC3131 SSOP14 – temperature range -40 to +150°C

ZSSC3131BA2

ZSSC3131 SSOP14 – temperature range -40 to +125°C

ZSSC313xKITV1.1

ZSSC313x Evaluation Kit, revision 1.1, including Evaluation Board, Kit ZSSC3131 IC samples, USB cable (software can be downloaded from European Technical Support the product page www.zmdi.com/zssc3131) Phone +49.351.8822.7.772

ZSSC313x Mass Calibration System V1.1

Package

Unsawn wafer: add “B” to sales code

Zentrum Mikroelektronik Unsawn wafer: add “B” to ZMD salesAmerica, code Inc. Dresden 1525 McCarthy Blvd., #212 DieAG on frame: add “C” to sales code Global Headquarters Milpitas, CA 95035-7453 Grenzstrasse 28 “T” to sales code USA Tube: add 01109Tape Dresden, Germany & Reel: add “R” USA Phone 1.855.275.9634 Central Office: add “T” to sales code PhoneTube: +49.351.8822.306 Phone +1.408.883.6310 Fax Tape +49.351.8822.337 Fax +1.408.883.6358 & Reel: add “R”

Fax

www.zmdi.com

Modular Mass Calibration S MCS boards, cable, connec the product page www.zmd

Die on frame: add “C” to Information sales code Sales and Further

+49.351.8822.87.772

Modular Mass Calibration System (MSC) for ZSSC313x including Kit MCS boards, cable, connectors (software can be downloaded from European Sales (Stuttgart) Phone +49.711.674517.55 the product page www.zmdi.com/zssc3131) Fax +49.711.674517.87955

Sales and Further Information

Description

ZSSC3131 die – tested; tem

ZSSC3131BE1

SDA 3

13 VBR_T

V SUPP Product

+4.5V to +5.5V

n.c. 5 SCL 4

Ordering Information (See data sheet s GND

µC

8 VSSE

C3 47nF

C2 100nF

DISCLAIMER: This information a Zentrum Mikroelektronik Dresden information furnished hereby is b licensee, or any other third party in any way related to the furnishin customer, licensee or any other t any damages in connection with tort (including negligence), strict l

Zentrum Mikroelektronik Dresden AG Global Headquarters Grenzstrasse 28 01109 Dresden, Germany

ZMD America, Inc. 1525 McCarthy Blvd., #212 Milpitas, CA 95035-7453 USA

Central Office: Phone +49.351.8822.306 Fax +49.351.8822.337

USA Phone 1.855.275.9634 Phone +1.408.883.6310 Fax +1.408.883.6358

European Technical Support Phone +49.351.8822.7.772 Fax +49.351.8822.87.772

European Sales (Stuttgart) Phone +49.711.674517.55 Fax +49.711.674517.87955

Zentrum Mikroelektronik Dresden AG, Japan Office 2nd Floor, Shinbashi Tokyu Bldg. 4-21-3, Shinbashi, Minato-ku Tokyo, 105-0004 Japan

ZMD FAR EAST, Ltd. 3F, No. 51, Sec. 2, Keelung Road 11052 Taipei Taiwan

Phone +81.3.6895.7410 Fax +81.3.6895.7301

Phone +886.2.2377.8189 Fax +886.2.2377.8199

Zentrum Mikroelektronik Dresden AG, Korea Office U-space 1 Building Unit B, 906-1 660, Daewangpangyo-ro Bundang-gu, Seongnam-si Gyeonggi-do, 463-400 Korea Phone +82.31.950.7679 Fax +82.504.841.3026

Sensor Interface IC Solutions

Products available at

On-Line Store

© 2015 Zentrum Mikroelektronik Dresden AG — Rev.1.24 — April 10, 2015. 25 All rights reserved. The material contained herein may not be reproduced, adapted, merged, translated, stored, or used without the prior written consent of the copyright owner.

ZSSC3135

Sensor Signal Conditioner for Piezoresistive Bridge Sensors

ZSSC3135

Sensor Signal Conditioner for Piezoresistive Bridge Sensors

Brief Description

Benefits

The ZSSC3135 is a member of the ZSSC313x family of CMOS integrated circuits designed for automotive/industrial sensor applications. All family members are well suited for highly accurate amplification and sensor-specific correction of resistive bridge sensor signals. An internal 16-bit RISC microcontroller running a correction algorithm compensates sensor offset, sensitivity, temperature drift, and non-linearity of the connected sensor element. The required calibration coefficients are stored by the one-pass calibration procedure in an on-chip EEPROM.



The ZSSC3135 is specially designed for piezoresistive bridge sensor elements. The amplification stage with an analog gain of 105 in combination with optional temperature compensation via an external temperature sensor meets or exceeds the requirements of piezoresistive sensor applications.

     

 

Available Support  

Features 



Adjustable to nearly all resistive bridge sensor types: analog gain of up to 105, maximum overall gain of 420 Sample rate up to 200 Hz ADC resolution 13/14 bit Safety functionality sensor connection External temperature sensor Digital compensation of sensor offset, sensitivity, temperature drift, and non-linearity Output options: ratiometric analog voltage output (5 - 95% maximum, 12.4 bit resolution) or ZACwire™ (digital One-Wire Interface (OWI)) Sensor biasing by voltage High voltage protection up to 33 V Supply current: max. 5.5mA Reverse polarity and short circuit protection Wide operation temperature range: -40 to +150°C Traceability by user-defined EEPROM entries

Family approach offers the best fitting IC selection to build cost-optimized applications No external trimming components required Low number of external components needed PC-controlled configuration and one-pass/ TM end-of-line calibration via I²C™* or ZACwire interface: simple, cost-efficient, quick, and precise High accuracy: 0.25% FSO** @ -25 to +85°C; 0.5% FSO @ -40 to +125°C Optimized for automotive/industrial environments due to robust protection circuitries, excellent electromagnetic compatibility and AEC-Q100 qualification

Evaluation Kits Application Notes Mass Calibration System

Physical Characteristics  



Supply voltage: 4.5 to 5.5 V Operation temperature: -40°C to +125°C (-40°C to +150°C extended temperature range depending on product version) Available in RoHS-compliant JEDEC-SSOP14 package or delivery as die

ZSSC3135 Minimum Application Requirements VCC Sensor Module

ZSSC3135

OUT

GND

* Note: I C™ is a trademark of NXP. ** FSO = Full Scale Output.

For more information, contact ZMDI via PRODUCT@ZMDI.COM.

Visit .com for more detailed information

© 2015 Zentrum Mikroelektronik Dresden AG — Rev. 1.24—April 10, 2015. All rights reserved. The material contained herein may not be reproduced, adapted, merged, translated, stored, or used without the prior written consent of the copyright owner. The information furnished in this publication is subject to changes without notice.

ZSSC3135

Sensor Signal Conditioner for Piezoresistive Bridge Sensors R1

ZSSC3135 Application Example

Temperature Sensor Out / OWI

Sensor Bridge

VDDE

9 AOUT

VDD

n.c.

SCL

SDA 3

SDA

10 VBN 11 VBR_B 12 VBP R1

GND Information (See data sheet sec Ordering

8 VSSE

ZSSC3135

C3 47nF

C2 100nF

SUPP Product Sales Code

Description

ZSSC3135BE1

ZSSC3135 die – tested;

ZSSC3135BA1

ZSSC3135 die – tested;

+4.5V to +5.5V

Serial Interface

13 VBR_T

VSSA 2

14 IRTEMP

VDDA 1

C1 100nF

ZSSC3135BE2

ZSSC3135 SSOP14 – t

ZSSC3135BA2

ZSSC3135 SSOP14 – t

ZSSC313xKITV1.1

ZSSC313x Evaluation K Board, ZSSC3135 IC sa downloaded from the pr

Temperature Sensor

ZSSC313x Mass Ordering Information (See data sheet section 8 for complete delivery options.)

Calibration System V1.1

Product Sales Code

Description

ZSSC3135BE1

ZSSC3135 die – tested; temperature range -40 to +150°C

ZSSC3135BA1

ZSSC3135 die – tested; temperature range -40 to +125°C

ZSSC3135BE2

ZSSC3135 SSOP14 – temperature range -40 to +150°C

ZSSC3135BA2

ZSSC3135 SSOP14 – temperature range -40 to +125°C

ZSSC313xKITV1.1

ZSSC313x Evaluation Kit, revision 1.1 including Evaluation Kit Board, ZSSC3135 IC samples, USB cable (software can be European Technical Support downloaded from the product page www.zmdi.com/zssc3135)Phone +49.351.8822.7.772

ZSSC313x Mass Calibration System V1.1

Package

Unsawn wafer: add “B” to sales code

Sales and Further Information Die on frame: add “C” to sales code Zentrum Mikroelektronik ZMD America, Unsawn wafer: add “B” to sales codeInc. Dresden McCarthy DieAG on frame: add “C” to1525 sales code Blvd., #212 Global Headquarters Milpitas, CA 95035-7453 Tube: add Grenzstrasse 28 “T” to sales code USA 01109Tape Dresden, Germany & Reel: add “R” USA Phone 1.855.275.9634 Central Office: add “T” to sales code PhoneTube: +49.351.8822.306 Phone +1.408.883.6310 Fax Tape +49.351.8822.337 +1.408.883.6358 & Reel: add “R” Fax

Fax

+49.351.8822.87.772

Modular Mass Calibration System (MSC) for ZSSC313x Kit Sales (Stuttgart) European including MCS boards, cable, connectors (software can be Phone +49.711.674517.55 downloaded from the product page www.zmdi.com/zssc3135)Fax +49.711.674517.87955

Sales and Further Information

www.zmdi.com

Modular Mass Calibratio including MCS boards, c downloaded from the pr

Zentrum Mikroelektronik Dresden AG Global Headquarters Grenzstrasse 28 01109 Dresden, Germany

ZMD America, Inc. 1525 McCarthy Blvd., #212 Milpitas, CA 95035-7453 USA

Central Office: Phone +49.351.8822.306 Fax +49.351.8822.337

USA Phone 1.855.275.9634 Phone +1.408.883.6310 Fax +1.408.883.6358

European Technical Support Phone +49.351.8822.7.772 Fax +49.351.8822.87.772

European Sales (Stuttgart) Phone +49.711.674517.55 Fax +49.711.674517.87955

Zentrum Mikroelektronik Dresden AG, Japan Office 2nd Floor, Shinbashi Tokyu Bldg. 4-21-3, Shinbashi, Minato-ku Tokyo, 105-0004 Japan

ZMD FAR EAST, Ltd. 3F, No. 51, Sec. 2, Keelung Road 11052 Taipei Taiwan

Phone +81.3.6895.7410 Fax +81.3.6895.7301

Phone +886.2.2377.8189 Fax +886.2.2377.8199

Zentrum Mikroelektronik Dresden AG, Korea Office U-space 1 Building Unit B, 906-1 660, Daewangpangyo-ro Bundang-gu, Seongnam-si Gyeonggi-do, 463-400 Korea Phone +82.31.950.7679 Fax +82.504.841.3026

Sensor Interface IC Solutions

Products available at

On-Line Store

ZSSC3136

Sensor Signal Conditioner for Safety Switch Applications

ZSSC3136

Sensor Signal Conditioner for Safety Switch Applications

Brief Description

Benefits

The ZSSC3136 is a member of the ZSSC313x family of CMOS integrated circuits for automotive/ industrial sensor applications. All family members are well suited for highly accurate amplification and sensor-specific correction of resistive bridge sensor signals. An internal 16-bit RISC microcontroller running a correction algorithm compensates sensor offset, sensitivity, temperature drift, and non-linearity of the connected sensor element. The required calibration coefficients are stored by the one-pass calibration procedure in an on-chip EEPROM.

    



The ZSSC3136 is optimized for SIL (Safety Integrity Level) rated switch applications. The integrated adjustable digital filter offers the possibility of setting up fast switching real-time applications as well as stabilized switching applications in the case of disturbed or unstable input signals.



In addition to the general features for switch applications, the ZSSC3136 offers the capability to set up safety-relevant SIL2 rated switches due to its extended safety functionalities.



Features        

     

Analog gain of 105, maximum overall gain of 420 Sample rate: 200 Hz maximum ADC resolution: 13/14 bit External temperature sensor Safety functionalities: Calibration microcontroller, sensor connection, analog front-end Adjustable to nearly all resistive bridge sensor types Digital compensation of sensor offset, sensitivity, temperature drift, and non-linearity Output options: ratiometric analog voltage output (5 - 95% in maximum, 12.4 bit resolution) or TM ZACwire (digital One-Wire Interface (OWI)) Sensor biasing by voltage High voltage protection up to 33 V Supply current: max. 5.5mA Reverse polarity and short circuit protection Wide operation temperature: -40 to +150°C Traceability by user-defined EEPROM entries * Note: I2C™ is a trademark of NXP. ** FSO = Full Scale Output.

Capability for setting up SIL level 2 applications Application-focused feature set No external trimming components required Only a few external protection devices needed PC-controlled configuration and one-pass/ TM end-of-line calibration via I²C™* or ZACwire interface: simple, cost-efficient, quick, and precise High accuracy (0.25% FSO** @ -25 to +85°C; 0.5% FSO @ -40 to +125°C) Optimized for automotive/ industrial environment due to robust protection circuitries, excellent electromagnetic compatibility and AEC-Q100 qualification

Available Support  

Evaluation Kits Application Notes Mass Calibration System

Physical Characteristics  



Supply voltage 4.5 to 5.5 V Operation temperature: -40°C to +125°C (-40°C to +150°C extended temperature range depending on product version) Available in RoHS-compliant JEDEC-SSOP14 package or delivery as die

ZSSC3136 Minimum Application Requirements

VCC Sensor Module

ZSSC3136

OUT

GND

For more information, contact ZMDI via PRODUCT@ZMDI.COM.

Visit .com for more detailed information

© 2015 Zentrum Mikroelektronik Dresden AG — Rev.1.24 — April 10, 2015. All rights reserved. The material contained herein may not be reproduced, adapted, merged, translated, stored, or used without the prior written consent of the copyright owner. The information furnished in this publication is subject to changes without notice.

ZSSC3136

Sensor Signal Conditioner for Safety Switch Applications R1

ZSSC3136 Switch Application Example

Temperature Sensor Out

Ordering Information (See data sheet se VDDE 7

9 AOUT

VDD 6

10 VBN 11 VBR_B 12 VBP R1

+4.5V to +5.5V

SDA 3

VDDA 1

ZSSC3136 die – tested; ZSSC3136 die – tested;

ZSSC3136BA1

R1 2kΩ

Out

14 IRTEMP

C1 100nF

12 VSUPP

ZSSC3136BE2 13

ZSSC3136 SSOP14 – te

ZSSC3136BA2

14 GND

ZSSC3136 SSOP14 – te

ZSSC313xKITV1.1

ZSSC313x Evaluation Ki ZSSC3136 IC samples, U from the product page ww

GPIO

Temperature Sensor

Ordering Information

Description

VSUPP

SCL 4

VSSA 2

VSUPP

ZSSC3136BE1

n.c. 5

13 VBR_T

GND

Product Sales Code

µC

Sensor Bridge

8 VSSE

ZSSC3136

C3 47nF

C2 100nF

ZSSC313x Mass Calibration Modular Mass Calibration System V1.1 MCS boards, cable, conn the product page www.zm (See data sheet section 8 for complete delivery options.)

Product Sales Code

Description

Package Sales and Further Information

ZSSC3136BE1

ZSSC3136 die – tested; temperature range -40 to +150 °C

ZSSC3136BA1

ZSSC3136 die – tested; temperature range -40 to +125 °C

ZSSC3136BE2

ZSSC3136 SSOP14 – temperature range -40 to +150 °C

ZSSC3136BA2

ZSSC3136 SSOP14 – temperature range -40 to +125 °C

ZSSC313xKITV1.1

ZSSC313x Evaluation Kit, revision 1.1, including Evaluation Board, Kit Phone +49.351.8822.7.772 ZSSC3136 IC samples, USB cable (software can be downloadedFax +49.351.8822.87.772 from the product page www.zmdi.com/zssc3136)

Unsawn wafer: add “B” to sales code Inc. Zentrum Mikroelektronik ZMD America, Die on frame: add “C” to 1525 salesMcCarthy code Blvd., #212 Dresden AG Global Headquarters Milpitas, CA 95035-7453 Unsawn wafer: add “B” to sales code Grenzstrasse 28 USA Die on frame: add “C” to sales code 01109 Dresden, Germany USA Phone 1.855.275.9634 CentralTube: Office: add “T” to sales code Tape & Reel: add “R” Phone +1.408.883.6310 Phone +49.351.8822.306 Fax +49.351.8822.337 Fax +1.408.883.6358 Tube: add “T” to sales code Tape & Reel: add “R”

European Technical Support

European Sales (Stuttgart)

ZSSC313x Mass Calibration Modular Mass Calibration System (MSC) for ZSSC313x includingPhone +49.711.674517.55 Kit Fax +49.711.674517.87955 System V1.1 MCS boards, cable, connectors (software can be downloaded from the product page www.zmdi.com/zssc3136)

Sales and Further Information Zentrum Mikroelektronik Dresden AG Global Headquarters Grenzstrasse 28 01109 Dresden, Germany

ZMD America, Inc. 1525 McCarthy Blvd., #212 Milpitas, CA 95035-7453 USA

Central Office: Phone +49.351.8822.306 Fax +49.351.8822.337

USA Phone 1.855.275.9634 Phone +1.408.883.6310 Fax +1.408.883.6358

www.zmdi.com

Zentrum Mikroelektronik Dresden AG, Japan Office 2nd Floor, Shinbashi Tokyu Bldg. 4-21-3, Shinbashi, Minato-ku Tokyo, 105-0004 Japan

ZMD FAR EAST, Ltd. 3F, No. 51, Sec. 2, Keelung Road 11052 Taipei Taiwan

Phone +81.3.6895.7410 Fax +81.3.6895.7301

Phone +886.2.2377.8189 Fax +886.2.2377.8199

Zentrum Mikroelektronik Dresden AG, Korea Office U-space 1 Building Unit B, 906-1 660, Daewangpangyo-ro Bundang-gu, Seongnam-si Gyeonggi-do, 463-400 Korea Phone +82.31.950.7679 Fax +82.504.841.3026

European Technical Support DISCLAIMER: This information applies to a product under development. Its characteristics and specifications are subject to change without notice. Zentrum Mikroelektronik Dresden AG (ZMD AG) assumes no obligation regarding future manufacture unless otherwise agreed to in writing. The Phone +49.351.8822.7.772 information furnished hereby is believed to be true and accurate. However, under no circumstances shall ZMD AG be liable to any customer, Fax * Note:+49.351.8822.87.772 I2C™ is a trademark of NXP. European Sales (Stuttgart) ** FSO = Full Scale Output. Phone +49.711.674517.55 Fax +49.711.674517.87955

licensee, or any other third party for any special, indirect, incidental, or consequential damages of any kind or nature whatsoever arising out of or in any way related to the furnishing, performance, or use of this technical data. ZMD AG hereby expressly disclaims any liability of ZMD AG to any customer, licensee or any other third party, and any such customer, licensee and any other third party hereby waives any liability of ZMD AG for any damages in connection with or arising out of the furnishing, performance or use of this technical data, whether based on contract, warranty, tort (including negligence), strict liability, or otherwise.

Sensor Interface IC Solutions

© 2015 Zentrum Mikroelektronik Dresden AG — Rev.1.24 — April 10, 2015. All rights reserved. The material contained herein may not be reproduced, adapted, merged, translated, stored, or used without the prior written consent of the copyright owner.

Products available at

On-Line Store

ZSSC3138

Sensor Signal Conditioner for Ceramic Sensor Applications

ZSSC3138

Sensor Signal Conditioner for Ceramic Sensor Applications

Brief Description

Benefits

The ZSSC3138 is a member of the ZSSC313x product family of CMOS integrated circuits designed for automotive/ industrial sensor applications. All family members are well suited for highly accurate amplification and sensor-specific correction of resistive bridge sensor signals. An internal 16-bit RISC microcontroller running a correction algorithm compensates sensor offset, sensitivity, temperature drift, and non-linearity of the connected sensor element. The required calibration coefficients are stored by the one-pass calibration procedure on chip (EEPROM).



Family approach offers the best fitting IC selection to build cost-optimized applications No external trimming components required Low number of external components needed PC-controlled configuration and one-pass/ end-of-line calibration via I²C™* or ZACwire™ interface: simple, cost efficient, quick, and precise High accuracy (0.25% FSO** @ -25 to +85°C; 0.5% FSO @ -40 to +125°C) Optimized for automotive/industrial environments due to robust protection circuitries, excellent electromagnetic compatibility and AEC-Q100 qualification

  

 

The ZSSC3138 offers a maximum analog gain of 420 and two offset compensation features. These fit perfectly with the requirements of ceramic thick-filmbased sensor elements as well as strain gauges. The high amplification in combination with the offset compensation offers the capability to set up ceramic thick-film-based sensor applications without laser trimming, which leads to better long-term stability.

Available Support

Features

Physical Characteristics



     

Adjustable to nearly all resistive bridge sensor types, analog gain of 420, maximum overall gain of 1680 Enhanced sample rate: 7.8 kHz maximum High ADC resolution 15/16 bit Safety functionality sensor connection Internal temperature compensation Digital compensation of sensor offset, sensitivity, temperature drift, and non-linearity Output options: ratiometric analog voltage output (5 - 95% maximum, 12.4 bit resolution) or TM ZACwire (digital One-Wire Interface (OWI)) Sensor biasing by voltage High voltage protection up to 33 V Supply current: 5.5mA maximum Reverse polarity and short circuit protection Wide operation temperature range between -40 to +150°C Traceability by user-defined EEPROM entries

  

 



Evaluation Kits Application Notes Mass Calibration System

ZSSC3138 Minimum Application Requirements VCC Sensor Module

ZSSC3138

OUT

GND

* Note: I C™ is a trademark of NXP. **** FSO Full Scale Output. FSO= = Full Scale Output.

For more information, contact ZMDI via PRODUCT@ZMDI.COM.

© 2015 Zentrum Mikroelektronik Dresden AG — Rev.1.24 — April 10, 2015. All rights reserved. The material contained herein may not be reproduced, adapted, merged, translated, stored, or used without the prior written consent of the copyright owner. The information furnished in this publication is subject to changes without notice.

Visit .com for more detailed information

ZSSC3138

Sensor Signal Conditioner for Ceramic Sensor Applications

ZSSC3138 Application Example

Out / OWI

OrderingGND Information (See data sheet se

Sensor Bridge

8 VSSE

VDDE 7

9 AOUT

VDD 6

10 VBN 11 VBR_B 12 VBP

ZSSC3138

C3 47nF

C2 100nF

VSUPP Code Product Sales

+4.5V to +5.5V

n.c. 5

ZSSC3138BE1

ZSSC3138 die – tested

ZSSC3138BA1

ZSSC3138 die – tested

SCL 4

SCL

SDA 3

SDA

Serial Interface

13 VBR_T

VSSA 2

14 N.C.

VDDA 1

ZSSC3138BE2

ZSSC3138 SSOP14 – t

ZSSC3138BA2

ZSSC3138 SSOP14 – t

C1 100nF

ZSSC313xKITV1.1

ZSSC313x Evaluation K Board, ZSSC3138 IC sa

ZSSC313x Mass

Modular Mass Calibratio including MCS boards,

Ordering Information (See data sheet section 8 for complete delivery options.)Calibration System V1.1 Product Sales Code

Description

Package

Sales and Further Unsawn wafer: add “B” toInformation sales code

ZSSC3138BE1

ZSSC3138 die – tested; temperature range -40 to +150°C

ZSSC3138BA1

ZSSC3138 die – tested; temperature range -40 to +125°C

ZSSC3138BE2

ZSSC3138 SSOP14 – temperature range -40 to +150°C

ZSSC3138BA2

ZSSC3138 SSOP14 – temperature range -40 to +125°C

ZSSC313xKITV1.1

ZSSC313x Evaluation Kit, version 1.1, including Evaluation Board, ZSSC3138 IC samples, USB cable

European Kit Technical Support Phone +49.351.8822.7.772 Fax +49.351.8822.87.772

ZSSC313x Mass Calibration System V1.1

Modular Mass Calibration System (MSC) for ZSSC313x including MCS boards, cable, connectors

European Kit Sales (Stuttgart) Phone +49.711.674517.55 Fax +49.711.674517.87955

Sales and Further Information

www.zmdi.com

Die on frame: add “C” to sales code Inc. Zentrum Mikroelektronik ZMD America, Dresden AG 1525 McCarthy Blvd., #212 Unsawn wafer: add “B” toMilpitas, sales code Global Headquarters CA 95035-7453 Die on frame: add “C” to sales Grenzstrasse 28 USA code 01109 Dresden, Germany Tube: add “T” to sales codeUSA Phone 1.855.275.9634 Central Office: Tape & Reel: add “R” Phone +49.351.8822.306 Phone +1.408.883.6310 Fax +49.351.8822.337 Fax +1.408.883.6358 Tube: add “T” to sales code Tape & Reel: add “R”

DISCLAIMER: This information a Zentrum Mikroelektronik Dresden information furnished hereby is licensee, or any other third party in any way related to the furnishin customer, licensee or any other any damages in connection with tort (including negligence), strict l

Zentrum Mikroelektronik Dresden AG Global Headquarters Grenzstrasse 28 01109 Dresden, Germany

ZMD America, Inc. 1525 McCarthy Blvd., #212 Milpitas, CA 95035-7453 USA

Central Office: Phone +49.351.8822.306 Fax +49.351.8822.337

USA Phone 1.855.275.9634 Phone +1.408.883.6310 Fax +1.408.883.6358

European Technical Support Phone +49.351.8822.7.772 Fax +49.351.8822.87.772

European Sales (Stuttgart) Phone +49.711.674517.55 Fax +49.711.674517.87955

Zentrum Mikroelektronik Dresden AG, Japan Office 2nd Floor, Shinbashi Tokyu Bldg. 4-21-3, Shinbashi, Minato-ku Tokyo, 105-0004 Japan

ZMD FAR EAST, Ltd. 3F, No. 51, Sec. 2, Keelung Road 11052 Taipei Taiwan

Phone +81.3.6895.7410 Fax +81.3.6895.7301

Phone +886.2.2377.8189 Fax +886.2.2377.8199

Zentrum Mikroelektronik Dresden AG, Korea Office U-space 1 Building Unit B, 906-1 660, Daewangpangyo-ro Bundang-gu, Seongnam-si Gyeonggi-do, 463-400 Korea Phone +82.31.950.7679 Fax +82.504.841.3026

Sensor Interface IC Solutions

© 2015 Zentrum Mikroelektronik Dresden AG — Rev.1.24 — April 10, 2015. All rights reserved. The material contained herein may not be reproduced, adapted, merged, translated, stored, or used without the prior written consent of the copyright owner.

Products available at

On-Line Store

ZSSC3154

Automotive Sensor Signal Conditioner with Dual Analog Output

ZSSC3154

Automotive Sensor Signal Conditioner with Dual Analog Output

Brief Description

Benefits

The ZSSC3154 is an integrated circuit for highly accurate amplification and sensor-specific correction of a bridge sensor signal. Up to two temperature sensors can also be read in parallel.



The circuitry provides different configurations of the analog outputs to show two measurement results simultaneously. This also allows generating a complementary bridge sensor signal, which is often a requirement in safety-relevant applications.



The ZSSC3154 can measure and process two external temperature sensors to compensate the temperature drift of the bridge sensor signal and to output a separate temperature signal.



Available Support  

The single-pass, digital end-of-line calibration combined with the integrated broken-chip detection supports automatic and highly efficient mass production.



Features



     

 

Differential bridge sensor input Half-bridge sensor or temperature sensor input Digital compensation of offset, gain, nonlinearity, and temperature dependency Two analog outputs; behavior programmable by EEPROM configuration Sequential analog output mode provides two measurement values at one output pin On-chip diagnostic and safety features including sensor connection diagnostic and broken-chip detection 2 EEPROM words for arbitrary user data Multiple configurable output options

Evaluation Kit Application Notes Calculation Tools

Physical Characteristics      

Supply voltage: 4.5 to 5.5V Maximum supply voltage: 7.7V Input span: 1.8 to 267mV/V ADC resolution: 14 bit Output resolution: > 12 bit from 10% to 90% Operating temperature range: -40°C to 150°C Package: QFN32 (5x5mm; wettable flank) or die

ZSSC3154 Basic Circuit DFBH

VDDA

VTN2

VSSA

VTN1

SDA

VBR_T

VBP VBR_B VBN

ZSSC3154

An integrated calibration microcontroller with an onchip EEPROM performs the digital compensation of the sensor offset, the sensitivity, the temperature drift, and the nonlinearity of a sensor signal.



Bridge sensor signal validation for safety applications via two antivalent analog outputs or via half-bridge sensor measurement output Simultaneous measurement of sensor signals, including temperature signal for compensation and for temperature output Efficient use of non-calibrated elements for bridge sensors and temperature sensors without external trimming components Single-pass end-of-line calibration algorithm minimizes production costs Excellent EMC/ESD robustness and AEC-Q100 qualification

SCL VDD

VDDE

VCC

AOUT1

AOUT2

VSSE

GND

For more information, contact ZMDI via SSC@zmdi.com.

Visit .com for more detailed information

© 2014 Zentrum Mikroelektronik Dresden AG — Rev. 1.41 — August 27, 2014 All rights reserved. The material contained herein may not be reproduced, adapted, merged, translated, stored, or used without the prior written consent of the copyright owner. The information furnished in this publication is subject to changes without notice.

ZSSC3154

Sensor Bridge

Automotive Sensor Signal Conditioner with Dual Analog Output

Product Sales Code

External Temperature Sensor 2 Temperature Sensor Select

Gain Factor

Offset Shift

ADC Mode

MUX

PGA

ZSSC3154 Die – Temp

ZSSC3154BA1C

ZSSC3154 Die – Tempe

EEPROM

I C™* ZSSC3154BA3R

I2C™*

ZSSC3154 QFN32 (5x5

Diagnostic Fault

ADC

ZSSC3154BE3R Band Mode ZSSC3154 QFN32 (5x5 ZSSC3154KIT

CMC

Analog Front-End AFE Internal Temperature Sensor

Description

ZSSC3154BA1B Conditioning Coefficients

RAM

Sensor Bridge

Ordering Information

ZSSC3154 Block Diagram

External Temperature Sensor 1

Internal Temperature Sensor

BAMP

DAC

ROM

BAMP

ZACwire™

ZSSC3154 SSC Evaluat AOUT2 Replacement Board, 5 Q AOUT1page www.zmdi product OWI (Digital Data IO)

Conditioning Calculation Digital Core

Conditioning Formula

Interfaces

Sales and* IFurther Information C™ is a trademark of NXP. 2

Zentrum Mikroelektronik Dresden AG Global Headquarters Grenzstrasse 28 01109 Dresden, Germany

Ordering Information

ZMD America, Inc. 1525 McCarthy Blvd., #212 Milpitas, CA 95035-7453 USA

Product Sales Code

Description

ZSSC3154BA1B

ZSSC3154 Die – Temperature Range -40 to 125°C

ZSSC3154BA1C

ZSSC3154 Die – Temperature Range -40 to 125°C

Sawn on frame

ZSSC3154BA3R

ZSSC3154 QFN32 (5x5 mm; wettable flank) –

Zentrum Mikroelektronik Dresden Reel

ZSSC3154BE3R

ZSSC3154 QFN32 (5x5 mm; wettable flank) – Temperature European Range -40 to(Stuttgart) 150 °C Sales

ZSSC3154KIT

ZSSC3154 SSC Evaluation Kit: Communication Board, SSCFax Board, Sensor Kitany damages in connection with +49.711.674517.87955 tort (including negligence), strict li Replacement Board, 5 QFN32 samples (software can be downloaded from the product page www.zmdi.com/zssc3154)

Central Office: Phone +49.351.8822.306 Fax +49.351.8822.337

European Technical Support Temperature Phone Range -40 to 125 °C +49.351.8822.7.772 Fax +49.351.8822.87.772 Phone +49.711.674517.55

USA Phone +855.275.9634 Package Phone +408.883.6310 +408.883.6358

Fax Wafer

DISCLAIMER: This information ap

information furnished hereby is b licensee, or any other third party

Reel in any way related to the furnishin

customer, licensee or any other th

Sales and Further Information

www.zmdi.com

SSC@zmdi.com

Zentrum Mikroelektronik Dresden AG Global Headquarters Grenzstrasse 28 01109 Dresden, Germany

ZMD America, Inc. 1525 McCarthy Blvd., #212 Milpitas, CA 95035-7453 USA

Central Office: Phone +49.351.8822.306 Fax +49.351.8822.337

USA Phone +855.275.9634 Phone +408.883.6310 Fax +408.883.6358

European Technical Support Phone +49.351.8822.7.772 Fax +49.351.8822.87.772

European Sales (Stuttgart) Phone +49.711.674517.55 Fax +49.711.674517.87955

Zentrum Mikroelektronik Dresden AG, Japan Office 2nd Floor, Shinbashi Tokyu Bldg. 4-21-3, Shinbashi, Minato-ku Tokyo, 105-0004 Japan

ZMD FAR EAST, Ltd. 3F, No. 51, Sec. 2, Keelung Road 11052 Taipei Taiwan

Phone +81.3.6895.7410 Fax +81.3.6895.7301

Phone +886.2.2377.8189 Fax +886.2.2377.8199

Sensor Interface IC Solutions

Products available at

On-Line Store

ZSSC3170

Automotive Sensor Signal Conditioner with LIN & PWM Interface

ZSSC3170

Automotive Sensor Signal Conditioner with LIN & PWM Interface

Brief Description

Benefits

The ZSSC3170 is a CMOS integrated circuit for highly accurate amplification and sensor specific correction of bridge sensor signals. Featuring a maximum analog gain of 420, as well as extended offset compensation capabilities, the ZSSC3170 is adjustable to nearly all resistive bridge sensor types.



Digital compensation of offset, sensitivity, temperature drift, and nonlinearity is accomplished via a 16-bit RISC microcontroller. Conditioning coefficients are stored in an EEPROM certified for automotive applications. Measured values are provided by one of the digital LIN or PWM interfaces. Each interface can support end-of-line calibration using the sensor output. Noise sensitivity is greatly reduced because the calibration equipment and the ZSSC3170 are mated digitally. For quick and easy evaluation and support for calibrating prototypes, ZMDI offers the ZSSC3170 SSC Evaluation Kit, which includes evaluation hardware, SSOP20 samples, and software.

    

Available Support   



   



Complies with LIN specifications 1.3 / 2.0 / 2.1 Configurable LIN publisher frame content Data conversion rate of up to 430Hz fully utilizes the maximum LIN channel capacity of 20kbit/s PWM high-side and low-side switches, support for LIN communication for end-of-line calibration Digital compensation of offset, gain, temperature nd rd effects up to 2 order, and nonlinearity up to 3 order. Compensation of temperature sensor offset, nd gain, and nonlinearity up to 2 order. Internal or external temperature reference Media temperature sensing by diode or RTD Load dump protection of the LIN pin up to ±40V Accuracy ±0.25% FSO @ -20 to 85°C ±0.50% FSO @ -40 to 125°C ±1.00% FSO @ -40 to 150°C 3 EEPROM words available for optional user data

Visit .com for more detailed information

     

Supply voltage: 7 to 18 V Current consumption in Sleep Mode: ≤ 100μA Input span: 1.8 to 267 mV/V ADC resolution: 13 to 14 bit Output resolution: up to 12-bit (LIN and PWM) Operating temperature range: -40 to 125°C Extended operating temperature range: ≤150°C Package: SSOP20, DFN20, or die

ZSSC3170 Basic Circuit LIN

GND VBAT

ZSSC3170



Evaluation Kit Application Notes Calculation Tools

Physical Characteristics 

Features

Measurand and temperature signal available via one output pin Compatible with nearly all resistive bridge inputs No external trimming components required Single-pass calibration minimizes calibration costs End-of-line calibration using sensor output Optimized for automotive environments with special protection circuitry, excellent electromagnetic compatibility, and numerous diagnostic features

For more information, contact ZMDI via SSC@zmdi.com.

© 2014 Zentrum Mikroelektronik Dresden AG — Rev. 2.50 — December 3, 2014. All rights reserved. The material contained herein may not be reproduced, adapted, merged, translated, stored, or used without the prior written consent of the copyright owner. The information furnished in this publication is subject to changes without notice.

ZSSC3170

VBN VBP

Automotive Sensor Signal Conditioner with LIN & PWM Interface

VTN2 VBR_B

Ext. RTD



Sensor Bridge

Interna Temp Senso

Applications

ZSSC3170 Block Diagram Ext. Temp. Diode

MUX

SCL

I2CTM*

Control Registers

SDA

VBR_T Temp. Sens. Select

VTN1 VBN VBP

MUX

Gain Factor

Offset Shift

ADC Mode

PGA

ADC

Analog Front-End (AFE) VTN2 VBR_B

CMC

EEPROM

Internal Temp. Sensor

HOUT

PWM

RAM

Digital Block

LOUT

LIN

Protection & Power Management

VB VSSE

Interfaces

ZSSC3170

* I C™ is a trademark of NXP. Ordering Information (See section 7 of the

Applications

Product Sales CodeSensor LIN Pressure Sensor with Temperature 11 LIN

ZSSC3170EE1C VSS 10

12 LOUT

ZSSC3170EE2 VSSE 9

13 n.c. 14

VBN

VBR_B

VBP

VTN 1

VBR_T

VTN2

n.c.

Ordering Information (See section 7 of the data sheet for additional Product Sales Code

Description ZSSC3170 Die — Temperature range: -40°C to +150°C

ZSSC3170EE2

ZSSC3170— SSOP20 — Temperature range: -40°C to +150°C

ZSSC3170EE3R

ZSSC3170 DFN20 – Temperature Range -40°C to +150°C

ZSSC3170EA1B

ZSSC3170 Die — Temperature range: -40°C to +125°C

ZSSC3170EA1C

ZSSC3170 Die — Temperature range: -40°C to +125°C

ZSSC3170EA3R

ZSSC3170 DFN20 – Temperature Range -40°C to +125°C

ZSSC3170KIT

ZSSC3170 Evaluation Kit and 5 SSOP20 samples

Sales and Further Information

LIN

C3 220pF

R1 10W

ZSSC3170EE3R 220nF HOUT 7

ZSSC3170— SSOP20 — Temper GND

ZSSC3170 DFN20 – Temperature

ZSSC3170 Die — Temperature ra

VDD 6 ZSSC3170EA1B SCL

SCL

SDA

ZSSC3170 Die — Temperature ra

ZSSC3170EA1C

RTD Media Temperature Sensor

ZSSC3170 DFN20 – Temperature 

ZSSC3170EA3R VSSA 3

ZSSC3170KIT VDDA 2 n.c. 1

ZSSC3170 Die — Temperature ra VBAT

ZSSC3170 Evaluation Kit and 5 S

R2 C1 100nF

Sales and Further Information

Zentrum Mikroelektronik Dresden AG Global Headquarters options.) Grenzstrasse 28 01109 Dresden, Germany

ZMD America, Inc. 1525 McCarthy Blvd., #212 Milpitas, CA 95035-7453 USA

Package

USA Phone +855.275.9634 Central Office:Unsawn on Wafer, 2450 pcs. Phone +49.351.8822.0 Phone +408.883.6310 Sawn on Wafer Frame, 2450 +408.883.6358 pcs. Fax +49.351.8822.600 Fax

ZSSC3170 Die — Temperature range: -40°C to +150°C

ZSSC3170EE1C

ZSSC3170

Sensor Bridge With Integrated Temperature Diode

ZSSC3170EE1B

ZSSC3170 Die — Temperature ra

ZSSC3170EE1B

Add R for 13” reel, 2000 pcs. Add T for tube, 660 pcs. European Technical Support Tape & Reel - 13" DISCLAIMER: This information ap Zentrum Mikroelektronik Dresden Phone +49.351.8822.7.772 information Unsawn on Wafer, 2450 pcs. furnished hereby is be Fax +49.351.8822.87.772 licensee, or any other third party f Sawn on Wafer Frame, 2450 in any waypcs. related to the furnishing European Sales (Stuttgart) Tape & Reel - 13" Phone +49.711.674517.55 Fax +49.711.674517.87955 Kit

www.zmdi.com

customer, licensee or any other th any damages in connection with o tort (including negligence), strict lia

SSC@zmdi.com

Zentrum Mikroelektronik Dresden AG Global Headquarters Grenzstrasse 28 01109 Dresden, Germany

ZMD America, Inc. 1525 McCarthy Blvd., #212 Milpitas, CA 95035-7453 USA

Central Office: Phone +49.351.8822.0 Fax +49.351.8822.600

USA Phone +855.275.9634 Phone +408.883.6310 Fax +408.883.6358

European Technical Support Phone +49.351.8822.7.772 Fax +49.351.8822.87.772

European Sales (Stuttgart) Phone +49.711.674517.55 Fax +49.711.674517.87955

Zentrum Mikroelektronik Dresden AG, Japan Office 2nd Floor, Shinbashi Tokyu Bldg. 4-21-3, Shinbashi, Minato-ku Tokyo, 105-0004 Japan

ZMD FAR EAST, Ltd. 3F, No. 51, Sec. 2, Keelung Road 11052 Taipei Taiwan

Phone +81.3.6895.7410 Fax +81.3.6895.7301

Phone +886.2.2377.8189 Fax +886.2.2377.8199

Sensor Interface IC Solutions

Products available at

Zentrum Mikroelektronik Dresden AG, Korea Office U-space 1 Building Unit B, 906-1 660, Daewangpangyo-ro Bundang-gu, Seongnam-si Gyeonggi-do, 463-400 Korea Phone +82.31.950.7679 Fax +82.504.841.3026

On-Line Store

ZSSC4151

Automotive Sensor Signal Conditioner with Analog Output

ZSSC4151

Automotive Sensor Signal Conditioner with Analog Output

Brief Description

Benefits

The ZSSC4151 is a CMOS integrated circuit for highly accurate amplification and sensor-specific correction of resistive bridge sensor signals. Digital compensation of sensor offset, sensitivity, temperature drift, and non-linearity is accomplished via an internal 16-bit RISC microcontroller running a correction algorithm, with calibration coefficients stored in an integrated EEPROM.



The ZSSC4151 is adjustable to nearly all resistive bridge sensor types. Measured values are provided at the analog voltage output and at the optional 2 digital I C™* or the ZACwire™ interface, also referred to as the one-wire interface (OWI). The digital interfaces can be used for a simple PCcontrolled calibration procedure to program a set of calibration coefficients into an on-chip EEPROM. The ZSSC4151 and the calibration equipment communicate digitally, so the noise sensitivity is greatly reduced. Digital calibration helps keep assembly cost low as no trimming by external devices or lasers is needed.

Features 

   

     

Safety and diagnostic functions that can enable support for automotive (ASIL B) and industrial (SIL 2) safety critical applications related to the ISO 26262:2011 and IEC 61508 standards Digital compensation of sensor offset, sensitivity, temperature drift, and non-linearity Adjustable to nearly all full or half bridge sensors Analog gain of 200, supporting sensors with spans down to 1mV/V using the digital zooming option Output options: ratiometric 12-bit analog voltage output (e.g., 5-95% or 10-90%) with freely adjustable clamping or ZACwire™ digital onewire-interface (OWI) Temperature compensation: internal or external diode, bridge external series resistance, or RTD Sensor biasing by internal voltage High voltage and reverse polarity protection up to 40V at all module pins: VDDE, VSSE and AOUT Maximum supply current: 7mA Short-circuit protection for AOUT Traceability via user-defined registers

* I2C™ is a trademark of NXP.



   



No external trimming components required and only a few external protection devices needed PC-controlled configuration and single-pass calibration via ZACwire™ interface: simple, costefficient, quick, and precise End-of-line calibration via ZACwire™ interface I²C™* interface option; can be used in development High accuracy: ±0.5% of full-scale output (FSO) at -40°C to 125°C; 1.0% FSO at -40°C to 150°C Optimized for automotive environments with special protection circuitry and excellent electromagnetic compatibility; AEC-Q100 qualified Latch-up immunity: up to ±100mA

Available Support   

Evaluation kit Application notes Calculation tools

Physical Characteristics      

Supply voltage: 4.5 to 5.5V Analog-to-digital (ADC) resolution: configurable from 12 to 16 bit Large sensor offset correction using digital zooming with 14 to 18 bit resolution Output resolution:12 bit Wide operation temperature range: -40°C to 150°C RoHS-compliant PQFN24 package or die

Basic Circuit for Dual Bridge Applications VDDA

VDDE

VSSA Sensor Module

TOP

ZSSC4151

AOUT

BRP BRN VSSE BOT

For more information, contact ZMDI via PRODUCT@ZMDI.COM.

© 2015 Zentrum Mikroelektronik Dresden AG — Rev. 1.00.01 — September 23, 2015. All rights reserved. The material contained herein may not be reproduced, adapted, merged, translated, stored, or used without the prior written consent of the copyright owner. The information furnished in this publication is subject to changes without notice.

Visit .com for more detailed information

Typical Applications

ZSSC4151

 Pressure sensors  Strain gauges

Automotive Sensor Signal Conditioner with Analog Output

 PTC RTD temperature

sensors

SCL Analog Application Example: IC SDA Pressure and Temperature Sensor

ZSSC4151

ZSSC4151 Block Diagram

TS1 External PN Temp Sensor

VDDA

Sensor Bridge

unit (ECU) through VCC

MUX

SCCM

 Pressure sensors

NVM

Gain Select

PGA

AOUT OWI

 Temperature compensation via diode on Interfaces VDDE

using the one wire Overvoltage Protection interface (OWI) signal on the AOUT pin VSSE Digital Core

BOT

 Additional I²CTM interface option

TS2

Ordering Information (Contact ZMDI for die opti

ZSSC4151 Full Bridge, External Diode Temperature Sensor Application

Sales Code

BRP

unit (ECU) through VCC and GND pins

BOT

 Sensor module with 3-pin connector provides

BRN

ratiometric analog output on AOUT pin

 Media temperature signal derived from

TS1

external temperature diode

TOP

 Temperature compensation via diode on

TS2

pressure chip

C4 10nF

 End-of-line calibration using the one wire interface (OWI) signal on the AOUT pin

C5 10nF

 Additional I²CTM interface option

Ordering Information (Contact ZMDI for die options)

ZSSC4151 PQFN24, single bridge input,

ZSSC4151KitV1.0

ZSSC4151 SSC Evaluation Kit: SSC Com 47nF GNDEvaluation software is availab 5 samples.

AOUT

AOUT/OWI

VSSE

C2 100nF

VDDE

VCC

SalesSCLand Further Information SCL Serial Interface ZentrumSDA MikroelektronikSDA Dresden AG VSSA Global Headquarters C1 Grenzstrasse VDDA 28 1 01109 Dresden, Germany100nF

ZMD America, Inc. 1525 McCarthy Blvd., #212 Milpitas, CA 95035-7453 USA

Central Office: Phone +49.351.8822.306 Fax +49.351.8822.337

USA Phone 1.855.275.9634 Phone +1.408.883.6310 Fax +1.408.883.6358

Description

European Technical Support DISCLAIMER: This information applie Package Zentrum Mikroelektronik Dresden AG Phone +49.351.8822.7.772 information ZSSC4151 PQFN24, single bridge input, operating temperature: -40 to 150°CFax Add V for tray, R for 13” reel, or W forfurnished 7” reel.hereby is belie +49.351.8822.87.772

licensee, or any other third party for a in any way related to the furnishing, p

Sales (Stuttgart) ZSSC4151 SSC Evaluation Kit: SSC Communication Board, ZSSC415x/6x/7xEuropean Evaluation Board, Sensor Replacement Board, customer, licensee or any other third Phone +49.711.674517.55 5 samples. Evaluation software is available for download on www.zmdi.com\ZSSC415x. (See kit documentation details.) anyfor damages in connection with or a Fax

Sales and Further Information

+49.711.674517.87955

tort (including negligence), strict liabili

material contained herein may not be reproduced, ada www.zmdi.comAll rights reserved. ThePRODUCT@ZMDI.COM

Zentrum Mikroelektronik Dresden AG Global Headquarters Grenzstrasse 28 01109 Dresden, Germany

ZMD America, Inc. 1525 McCarthy Blvd., #212 Milpitas, CA 95035-7453 USA

Central Office: Phone +49.351.8822.306 Fax +49.351.8822.337

USA Phone 1.855.275.9634 Phone +1.408.883.6310 Fax +1.408.883.6358

European Technical Support Phone +49.351.8822.7.772 Fax +49.351.8822.87.772

European Sales (Stuttgart) Phone +49.711.674517.55 Fax +49.711.674517.87955

Zentrum Mikroelektronik Dresden AG, Japan Office 2nd Floor, Shinbashi Tokyu Bldg. 4-21-3, Shinbashi, Minato-ku Tokyo, 105-0004 Japan

ZMD FAR EAST, Ltd. 3F, No. 51, Sec. 2, Keelung Road 11052 Taipei Taiwan

Phone +81.3.6895.7410 Fax +81.3.6895.7301

Phone +886.2.2377.8189 Fax +886.2.2377.8199

Zentrum Mikroelektronik Dresden AG, Korea Office U-space 1 Building Unit B, 906-1 660, Daewangpangyo-ro Bundang-gu, Seongnam-si Gyeonggi-do, 463-400 Korea Phone +82.31.950.7679 Fax +82.504.841.3026

Sensor Interface IC Solutions

Descr

ZSSC4151AE2

ZSSC4151 Die

Sensor Bridge

 5V module powered by the electronic control

ZSSC4151KitV1.0

ADC  Media temperature signal derived from

Analog pressure chip Front-End ROM (AFE) End-of-line calibration

Temp Sensor

Analog Application Example: Pressure and Temperature Sensor

ZSSC4151AE2

VSSA

BAMP

 Strain gauges Alternate External Temperature Sensor 2

TM ratiometric analog on AOUT pin RAMoutput ZACwire

DAC / external temperature CMC diode

BRN

 PTC RTD temperature

Management and GND pins

ADC  Sensor Mode module with 3-pin connector provides

Input Select

BRP

Typical Applications

Sales Code

 5V module powered by the electronic control Power

TOP Mode

sensors

Alternate External Temperature Sensor 2

Products available at

On-Line Store

ZSSC416x/ZSSC417x Sensor Signal Conditioner Family

ZSSC416x/417x

Sensor Signal Conditioner Family

Brief Description

Benefits

ZMDI’s ZSSC416x/ZSSC417x is a family of CMOS integrated circuits for highly accurate amplification and sensor-specific correction of differential bridge sensor signals. Featuring a maximum analog preamplification in the range of 150 to 200, this product is adjustable to nearly all resistive bridges as well as voltage source sensor types; e.g., thermocouples. Digital compensation of offset, sensitivity, temperature drift, and nonlinearity is accomplished with a 16-bit RISC microcontroller. Calibration coefficients and configuration data are stored in the ZSSC416x/ ZSSC417x non-volatile memory (NVM), which is reliable in automotive applications. Measured values can be read via a digital SENT or 2 I C™* interface. The SENT interface enables transmission of sensor data via its fast channel as well as supplementary data via its “slow” Serial Data Message (SDM) channel using only one output pin. End2 of-line calibration is supported via an I C™ interface or via a One-Wire Interface (OWI) through the data output pin (DOUT). The ZSSC416x/ ZSSC417x and the calibration equipment communicate digitally, so the noise sensitivity is greatly reduced. Digital calibration helps keep assembly cost low as no trimming by external devices or lasers is needed. The ZSSC416x/ZSSC417x is optimized for automotive environments by overvoltage and reverse polarity protection circuitry, excellent electromagnetic compatibility, and multiple diagnostic features.

Features  



  

 SENT output option based on SAE J2716 Rev 3.0 

   

standard using fast and SDM data channels Supports output of one or more sensor signals and product identification via a single SENT interface connection Configurable for nearly all resistive bridge sensors One-pass end-of-line calibration algorithm minimizes production costs No external trimming or components required I²C™ interface option

Available Support   

Evaluation Kit Application Notes Calculation Tools

Physical Characteristics       

Supply voltage: 4.75V to 5.25V Protection up to +/-18V Input span: 1 to 800 mV/V Analog-to-digital (ADC) resolution: configurable from 12 to 16 bit Large sensor offset correction using digital zooming with 14 to 18 bit resolution Output resolution: 12-bit via SENT interface; up to 2 15-bit plus a sign bit for OWI or I C™ interface Package: 4x4mm QFN24 or die

Basic Circuit for Dual Bridge Applications

Differential sensor bridge or voltage source inputs Internal or external temperature sensors, selectable for conditioning of sensor input signals or temperature output Digital compensation of offset, gain, and higher order nonlinearity as well as temperature coefficients of measured sensor input signals Operating temperature range: -40°C to 150°C Accuracy: ±0.25% FSO @ -40°C to 125°C NVM memory for configuration data, user configurable measurement and conditioning function, and user-selected data

VCC

SENT/OWI

ZSSC 4165

SDA SCL GND

* I C™ is a trademark of NXP. . For more information, contact ZMDI via PRODUCT@ZMDI.COM. © 2015 Zentrum Mikroelektronik Dresden AG — Rev. 1.11.00 — September 21, 2015. All rights reserved. The material contained herein may not be reproduced, adapted, merged, translated, stored, or used without the prior written consent of the copyright owner. The information furnished in this publication is subject to changes without notice.

Sensor Interface IC Solutions

Products available at

On-Line Store

ZSSC416x/ZSSC417x Sensor Signal Conditioner Family

Example Block Diagram: ZSSC416x ZSSC416x

SCL

I2CTM

TS1 External PN Temp Sensor

VDDA

TOP Mode

BR1P

Sensor Bridge 1

BR1N Sensor Bridge 2

BR2P

SCCM

BR2N

Input Select

MUX

PGA

Temp Sensor

NVM

ADC Mode

Gain Select

RAM

ZACwireTM

CMC

SENT

DOUT

ADC

OWI

Interfaces

Analog Frontend

ROM

VDDE

POWER

BOT VDDA

SDA

Digital Core



VSSE

TS2

VSSA

External RTD/NTC VSSA

ZSSC4162 Single Full Bridge, External RTD Temp Sensor

SENT Application Example: Pressure and Temperature Sensor

Sensor Bridge

 5V module powered by the electronic control

BR1P

unit (ECU)

BR1N TS1

 Media temperature signal derived from

TOP

external RTD

 Temperature compensation via diode on

VDDA

pressure chip

 End-of-line calibration using the One Wire Interface (OWI) signal on the DOUT pin

TS2

 External RTD/NTC

VSSA

VSSE

ZSSC4162

pressure and media temperature signal within SENT frame

SENT/OWI

CLOAD

BOT

 Sensor module with 3-pin connector provides

RSENT

DOUT

GND

C1 VDDE

VCC

SCL

SCL Serial Interface

SDA

BR2P

VSSA

BR2N

VDDA

 Additional I²CTM interface option

 5V module with thermocouple interface  Supports different thermocouple types  Internal temperature sensor available for

ZSSC4171 Thermocouple Sensor

EMC Filter

cold-junction temperature compensation

 Thermocouple input diagnostic tests  Reports thermocouple measurement as

a single-secure message and reports room temperature measurement through SDM channel on SENT

 End-of-line calibration using the OWI signal

VSSA

TS1 TOP TS2

SENT/OWI

CLOAD

BOT BR1N

RSENT

DOUT

BR1P

VSSE

ZSSC4171

SENT Application Example: Thermocouple Measurement

GND

C1 VDDE

VCC

SCL SDA

BR2P

VSSA

BR2N

VDDA

on the DOUT pin

Visit .com for more detailed information

© 2015 Zentrum Mikroelektronik Dresden AG — Rev. 1.11.00 — September 21, 2015. All rights reserved. The material contained herein may not be reproduced, adapted, merged, translated, stored, or used without the prior written consent of the copyright owner. The information furnished in this publication is subject to changes without notice.

ZSSC416x/ZSSC417x

measurement options (i.e., internal sensor, external diode, and/or RTD; math support f NTC temperature sensors); SENT or I²CTM interface; OWI option for calibration

Sensor Signal Conditioner Family

ZSSC4165

Typical Applications for ZSSC416x/ZSSC417x: Pressur sensors, temperature sensing via the bridge, and more.

Product Options BRIDGE SENSOR APPLICATIONS

VOLTAGE SOURCE SENSOR APPLICATIONS (e.g., Thermocouples)

ZSSC4161

Single full or half bridge; basic internal and/or external temperature measurements; SENT or I²CTM interface; OWI option for calibration

ZSSC4162

Single full or half bridge; extended temperature measurement options (i.e., internal sensor, external diode, and/or RTD; math support for NTC temperature sensors); SENT or I²CTM interface; OWI option for calibration

ZSSC4165

Dual full or half bridge; extended temperatu measurement options; SENT or I²CTM interf OWI option for calibration

ZSSC4171

Single thermocouple interface; supports N-type thermoOrdering Information (Contact ZMDI for die opt couples; additional thermocouple types on request; Sales Code D diagnostics for thermocouples; internal temperature sensor for cold-junction temperature compensation; TM QFN24, single bridge input, SE SENT or I²CZSSC4161BE2 interface; OWI ZSSC4161 option for calibration

ZSSC4175

Dual thermocouple interface; supports N-type thermoZSSC4162BE2 ZSSC4162 QFN24, single bridge input, SE couples; additional thermocouple types on request; measurement options , operating tempera diagnostics for thermocouple; internal temperature sensor for cold-junction temperature compensation; SENT orbridge input, SEN ZSSC4165BE2 ZSSC4165 QFN24, dual I²CTM interface; OWI option formeasurement calibration options, operating tempera

Dual full or half bridge; extended temperature measurement options; SENT or I²CTM interface; OWI option for calibration

external temperature measurement, operat

ZSSC4171BE2

ZSSC4171 QFN24, single voltage source s temperature measurement, support for N-ty Typical Applications for ZSSC416x/ZSSC417x: Pressure sensors, strain gauges, thermocouple temperature, NTC/PTC RTD temperature 150°C

sensors, temperature sensing via the bridge, and more.

ZSSC4175BE2

Ordering Information (Contact ZMDI for die options) Sales Code ZSSC4161BE2 ZSSC4162BE2

ZSSC4175 QFN24, dual voltage source se temperature measurement, support for N-ty 150°C

ZSSC416x/417xKitV1.4 ZSSC41xx SSC Evaluation Kit: Com Software is available for download t Package ZMDI Non-Disclosure Agreement (N

Description TM

ZSSC4161 QFN24, single bridge input, SENT or I²C output interface, basic internal and/or external temperature measurement, operating temperature: -40 to 150°C

Add T for tape, R for 13” reel, or W for 7” reel

TM Sales and Further Information Add T for tape, R for 13” reel, ZSSC4162 QFN24, single bridge input, SENT or I²C output interface, extended temperature or W for 7” reel measurement options, operating temperature: -40 to 150°C Zentrum Mikroelektronik ZMD America, Inc.

Dresden AG

1525 McCarthy Blvd., #212

ZSSC4165BE2

TM Add T for tape, R for 13” reel, ZSSC4165 QFN24, dual bridge input, SENT or I²C output interface, extended temperature Global Headquarters Milpitas, CA 95035-7453 or W for 7” reel measurement options, operating temperature: -40 to 150°C Grenzstrasse 28 USA

ZSSC4171BE2

TM Add T for tape, R for 13” reel, ZSSC4171 QFN24, single voltage source sensor input, SENT or I²C output interface, internal USA Phone 1.855.275.9634 Central or W for 7” reel temperature measurement, support for N-type thermocouples, operating temperature: -40Office: to Phone +49.351.8822.306 Phone +1.408.883.6310 150°C

ZSSC4175BE2

Add T for tape, R for 13” reel, ZSSC4175 QFN24, dual voltage source sensor inputs, SENT or I2C™ output interface, internal or W for 7” reel temperature measurement, support for N-type thermocouples, operating temperature: -40 to European Technical Support DISCLAIMER: This information applie 150°C

01109 Dresden, Germany

Fax

+49.351.8822.337

Fax

+1.408.883.6358

Phone +49.351.8822.7.772

Zentrum Mikroelektronik Dresden AG

Fax

any damages in connection with or a tort (including negligence), strict liabil

furnished hereby is belie +49.351.8822.87.772 ZSSC416x/417xKitV1.4 ZSSC41xx SSC Evaluation Kit: Communication Board, SSC Board, SensorFax Replacement Board, 5 samples.information licensee, or any other third party for Software is available for download through your ZMDI sales representativeEuropean or field applications engineer with a in any way related to the furnishing, p Sales (Stuttgart) customer, licensee or any other third ZMDI Non-Disclosure Agreement (NDA). Phone +49.711.674517.55

Sales and Further Information

www.zmdi.com

+49.711.674517.87955

Zentrum Mikroelektronik Dresden AG Global Headquarters Grenzstrasse 28 01109 Dresden, Germany

ZMD America, Inc. 1525 McCarthy Blvd., #212 Milpitas, CA 95035-7453 USA

Central Office: Phone +49.351.8822.306 Fax +49.351.8822.337

USA Phone 1.855.275.9634 Phone +1.408.883.6310 Fax +1.408.883.6358

European Technical Support Phone +49.351.8822.7.772 Fax +49.351.8822.87.772

European Sales (Stuttgart) Phone +49.711.674517.55 Fax +49.711.674517.87955

Zentrum Mikroelektronik Dresden AG, Japan Office nd 2 Floor, Shinbashi Tokyu Bldg. 4-21-3, Shinbashi, Minato-ku Tokyo, 105-0004 Japan

ZMD FAR EAST, Ltd. 3F, No. 51, Sec. 2, Keelung Road 11052 Taipei Taiwan

Phone +81.3.6895.7410 Fax +81.3.6895.7301

Phone +886.2.2377.8189 Fax +886.2.2377.8199

Zentrum Mikroelektronik Dresden AG, Korea Office U-space 1 Building Unit B, 906-1 660, Daewangpangyo-ro Bundang-gu, Seongnam-si Gyeonggi-do, 463-400 Korea Phone +82.31.950.7679 Fax +82.504.841.3026

Sensor Interface IC Solutions

Products available at

On-Line Store

Features of ZSSC416x/ZSSC417x Family SSC ICs

Features

ZSSC4161

ZSSC4162

ZSSC4165

Single

Dual

Full or Half Bridge Sensor Input Voltage Source Sensor Input (e.g., Thermocouples)

ZSSC4171

ZSSC4175

Single

Dual

SENT Output (SAE-J2716)



OWI Interface Option for Calibration



I²C™ Interface Option for Output and Calibration



Basic Internal/External Temperature Measurement



Extended Temperature Measurement (i.e., internal sensor, external diode, and/or RTD; math support for NTC temperature sensors)



Supports PTC Temperature Sensors



Internal Temperature Sensor for Cold Junction Temperature Compensation



Support for N Type Thermocouples with Additional Types Available on Request



Diagnostics For Thermocouples



ASIL B (ISO 26262)



Overvoltage Protection ± 18V



Visit .com for more detailed information

ZSSC5101 ZSSC5101

xMR xMRSensor SensorSignal SignalConditioner Conditioner

ZSSC5101

xMR Sensor Signal Conditioner

Brief BriefDescription Description

Benefits Benefits

The TheZSSC5101 ZSSC5101is isa aCMOS CMOSintegrated integratedcircuit circuitforforconconverting verting sine sine and and cosine cosine signals signals obtained obtained from from magnetoresistive magnetoresistivebridge bridgesensors sensorsinto intoa aratiometric ratiometric analog analogvoltage voltagewith witha auser-programmable user-programmablerange rangeofof travel traveland andclamping clampinglevels. levels. The TheZSSC5101 ZSSC5101accepts acceptssensor sensorbridge bridgearrangements arrangements forforboth bothrotational rotationalasaswell wellasaslinear linearmovement. movement. Depending Dependingononthe thetype typeofofsensor sensorbridge, bridge,a afull-scale full-scale travel travelrange rangeofofupuptoto360 360mechanical mechanicaldegrees degreescan canbebe obtained. obtained. Programming Programmingofofthe thedevice deviceis isperformed performedthrough throughthe the output outputpin, pin,allowing allowingin-line in-lineprogramming programmingofoffully fully assembled assembled3-wire 3-wiresensors. sensors.Programming Programmingparamparameters etersare arestored storedininananEEPROM EEPROMand andcan canbebere-prore-programmed multiple grammed multipletimes. times. The TheZSSC5101 ZSSC5101is isfully fullyautomotive-qualified automotive-qualifiedwith withanan ambient ambienttemperature temperaturerange rangeupuptoto160°C. 160°C.

  No Noexternal externaltrimming trimmingcomponents componentsrequired required   PC-controlled PC-controlledconfiguration configurationand andsingle-pass single-pass

  Ratiometric Ratiometricanalog analogoutput output   Up Uptoto4608 4608analog analogsteps steps   Step Stepsize sizeasassmall smallasas0.022° 0.022°   Programming Programmingthrough throughoutput outputpin pinvia via  

     

one-wire one-wireinterface interface  Offset Offsetcalibration calibrationofofthe thebridge bridgeinput inputsignals signals  Programmable Programmablelinear lineartransfer transfercharacteristic: characteristic:   Zero position Zero position   Angular Angularrange range   Upper Upperand andlower lowerclamping clampinglevels levels   Rising or falling slope Rising or falling slope  Loss Lossofofmagnet magnetindication indicationwith withprogrammable programmable threshold thresholdlevel level  Accepts Acceptsanisotropic, anisotropic,giant, giant,and andtunnel tunnelmagnetomagnetoresistive resistivebridge bridgesensors sensors(AMR, (AMR,GMR GMRand andTMR) TMR)  Programmable Programmable32-bit 32-bituser userIDID CRC, error detection, and error  CRC, error detection, and errorcorrection correction ononEEPROM EEPROMdata data  Diagnostics: Diagnostics:broken-wire broken-wiredetection detection  Automotive-qualified Automotive-qualifiedtotoAEC-Q100, AEC-Q100,grade grade0 0

 

    

Available AvailableSupport Support   Evaluation EvaluationKitKit   Application ApplicationNotes Notes

Physical PhysicalCharacteristics Characteristics   Wide C C(die) Wideoperation operationtemperature: temperature:-40 -40C Ctoto+160 +160 (die)   Supply Supplyvoltage: voltage:4.5V 4.5Vtoto5.5V 5.5V   SSOP-14 SSOP-14package, package,bare baredie, die,ororunsawn unsawnwafer wafer

ZSSC5101 ZSSC5101Typical TypicalApplication ApplicationCircuit Circuit Sensor Bridges Sensor Bridges

VDDS VDDS VSINP VSINP

ZSSC5101 ZSSC5101

Features Features



calibration calibrationvia viaone-wire one-wireinterface interfaceallows allows programming assembled programmingofoffully fully assembledsensors sensors  Can Canbebeused usedwith withlow-cost low-costferrite ferritemagnets magnets  Allows Allowslarge largeairairgaps gapsbetween betweensensors sensorsand and magnets magnets  Optimized Optimizedforforautomotive automotiveenvironments environmentswith with extended extendedtemperature temperaturerange rangeand andspecial special protection protectioncircuitry circuitrywith withexcellent excellentelectroelectromagnetic magneticcompatibility compatibility monitoring  Power Powersupply supply monitoring  Sensor Sensormonitoring monitoring failure  Detection DetectionofofEEPROM EEPROMmemory memory failure  Connection Connectionfailure failuremanagement management (INL)  High Highaccuracy: accuracy:± ±0.15° 0.15°integral integralnonlinearity nonlinearity (INL) after calibration after calibration

VSINN VSINN

VCOSP VCOSP

VCOSN VCOSN

CB CB 100nF 100nF

VDDE VDDE

VOUT VOUT

+5V+5V

Load Load Circuit Circuit

Rout Rout Cout Cout

VSSE VSSE

VSSS VSSS

For more information, contact ZMDI viavia PRODUCT@ZMDI.COM. For more information, contact ZMDI PRODUCT@ZMDI.COM. © 2015 Zentrum Mikroelektronik Dresden AGAG —— Rev. 1.22—April 29,29, 2015 All All rights reserved. TheThe material contained herein may notnot be be reproduced, adapted, merged, translated, © 2015 Zentrum Mikroelektronik Dresden Rev. 1.22—April 2015 rights reserved. material contained herein may reproduced, adapted, merged, translated, stored, or used without thethe prior written consent of the copyright owner. TheThe information furnished in this publication is subject to changes without notice. stored, or used without prior written consent of the copyright owner. information furnished in this publication is subject to changes without notice.

Visit .com for more detailed information

ZSSC5101

VSINP VSINN VCOSP VCOSN

VDDS

xMR Sensor Signal Conditioner

Cos

VSSS

MUX

PGA

ADC

Analog Frontend AFE VSSE

Application Circuit for AMR Sensors AMR Sensor Bridge

ZSSC5101 Block Diagram VDDE

Sin

VSSS

VDDS

Cos

VSSS

VSINP

VDDS VSSS

VSINP VSINN VCOSP VCOSN

EEPROM

Power Supply Regulators

MUX

PGA

Cordic Algorithm

ADC

Analog Frontend AFE

One-Wire Interface

Buffer Amp.

DAC Interface

VSSE

Sales Code AMR Sensor Bridge

TMR Sensor Bridge e.g., MDT MMA253F

VDDS

VSINN VCOSP VCOSN

ZSSC5101

VSINP VDDE

CB 100nF

+5V

VOUT

X+

Load Circuit

Rout

X-

Cout

Y+

VSSE

GND Y-

Ordering Information

ZSSC5101 Die – Temperatur

VDDS

ZSSC5101 Die – Temperatur

ZSSC5101BE3B

VSINP ZSSC5101BE1C

VDDE

5 ZSSC5101BE4R VSINN

VSSS

ZSSC5101 Die – Temperatur

ZSSC5101BE2B

VCC

VCOSP

VOUT

ZSSC5101BE4T

VSSE

6 VCOSN ZSSC5101 KIT 4

Rs=51kΩ Rp = 5kΩ to 10kΩ

+5V

Description

ZSSC5101BE1B Application Circuit for TMR Sensors

ZSSC5101

Application Circuit for AMR Sensors

 Absolute Rotary Position Sensor 100nF VDDE VSINN  Steering Wheel Position Sensor VOUT VCOSP  Pedal Position Sensor VCOSN Sensor VSSE  Throttle Position  Float-Level Sensor VOUT  Ride HeightVSSS Position Sensor  Non-Contacting Potentiometer  Rotary Dial Ordering Information

Digital Signal Processing and Control

ZSSC5101

VDDS

Applications

ZSSC5101+5V Die – Temperatur

Load Circuit

100nF ZSSC5101 SSOP-14 – Temp

out out ZSSC5101 SSOP-14 – Temp

Evaluation Kit: USB Commun

VSSS

Sales and Further Information

Zentrum Mikroelektronik Dresden AG Delivery Package Global Headquarters Grenzstrasse 28 8” tested wafer, 01109unsawn, Dresden,thickness Germany = 390

ZMD America, Inc. 1525 McCarthy Blvd., Milpitas, CA 95035-74 USA

Sales Code

Description

ZSSC5101BE1B

ZSSC5101 Die – Temperature range: -40°C to +160°C

ZSSC5101BE2B

ZSSC5101 Die – Temperature range: -40°C to +160°C

8” tested wafer, unsawn, thickness = 725 ±15µm Phone +49.351.8822.306 Phone +1.408.883.63

ZSSC5101BE3B

ZSSC5101 Die – Temperature range: -40°C to +160°C

8” tested wafer, unsawn, thickness = 250 ±15µm

ZSSC5101BE1C

ZSSC5101 Die – Temperature range: -40°C to +160°C

8” tested wafer, sawn on frame, thickness = 390 ±15µm

ZSSC5101 SSOP-14 – Temperature range: -40°C to +150°C

13” tape and reel +49.351.8822.7.772 Phone

ZSSC5101BE4R ZSSC5101BE4T ZSSC5101 KIT

±15µm

Central Office:

USA Phone 1.855.275

Fax

+49.351.8822.337

+1.408.883.63

European Technical Support

DISCLAIMER: This inform Zentrum Mikroelektronik D information furnished her Fax +49.351.8822.87.772 licensee, or any other thir ZSSC5101 SSOP-14 – Temperature range: -40°C to +150°C Tube in any way related to the f European Sales (Stuttgart) customer, licensee or any Phone +49.711.674517.55 Evaluation Kit: USB Communication Board, ZSSC5101 AMR board, adapters. Software is downloaded (see sheet). anydata damages in connectio Fax +49.711.674517.87955 tort (including negligence)

Sales and Further Information

www.zmdi.com

Zentrum Mikroelektronik Dresden AG Global Headquarters Grenzstrasse 28 01109 Dresden, Germany

ZMD America, Inc. 1525 McCarthy Blvd., #212 Milpitas, CA 95035-7453 USA

Central Office: Phone +49.351.8822.306 Fax +49.351.8822.337

USA Phone 1.855.275.9634 Phone +1.408.883.6310 Fax +1.408.883.6358

European Technical Support Phone +49.351.8822.7.772 Fax +49.351.8822.87.772

European Sales (Stuttgart) Phone +49.711.674517.55 Fax +49.711.674517.87955 43

Zentrum Mikroelektronik Dresden AG, Japan Office nd 2 Floor, Shinbashi Tokyu Bldg. 4-21-3, Shinbashi, Minato-ku Tokyo, 105-0004 Japan

ZMD FAR EAST, Ltd. 3F, No. 51, Sec. 2, Keelung Road 11052 Taipei Taiwan

Phone +81.3.6895.7410 Fax +81.3.6895.7301

Phone +886.2.2377.8189 Fax +886.2.2377.8199

Zentrum Mikroelektronik Dresden AG, Korea Office U-space 1 Building Unit B, 906-1 660, Daewangpangyo-ro Bundang-gu, Seongnam-si Gyeonggi-do, 463-400 Korea Phone +82.31.950.7679 Fax +82.504.841.3026

Sensor Interface IC Solutions

Products available at

On-Line Store

© 2015 Zentrum Mikroelektronik Dresden AG — Rev. 1.22—April 29, 2015 All rights reserved. The material contained herein may not be reproduced, adapted, merged, translated, stored, or used without the prior written consent of the copyright owner.

Basic Application Overview

ZMDI‘s Sensor Signal Conditioners Resistive SSC Sensitivity > 20mV/V Sensor Measurand

Typical Resistive Sensor Type

> 10mV/V >5mV/V > 2mV/V

Pressure Temperature Flow Level

Ceramic Thick Film Bridge Metal Thin-Film Bridge Strain Gauge Bridge

Position

Magnetoresistive

Altitude

Resistive Bridge

Sensor Measurand High Temperature

Sensor Measurand Humidity

Sensor Type Thermocouple

Typical Sensor Type Capacitive

Analog Output

Digital Output

ZSC31050 ZSSC3138 ZSC31150 ZSSC3154 ZSSC415x

ZSC31050 ZSSC3170 ZSSC4161 ZSSC4162 ZSSC4165 ZSSC4169

Analog Output

ZSSC3138

Digital Output

Analog Output

Digital Output

ZSC31014

ZSC31015 ZSSC3015 ZSSC3131 ZSSC3135 ZSSC3136

ZSSC3016 ZSSC3026 ZSSC3036 ZSSC3027

ZSSC3218

Type N Sent Output

I2C Output

Analog Output

ZSC31010

ZSSC5101 ZSSC3016 ZSSC3026 ZSSC3036 ZSSC3027

Type K SENT Output

ZSSC4171

I2C Output ZSSC4179

Maximum Input Capacitance 2 - 10pF 2-260pF

Analog Output

Digital Output

Analog Output

Digital Output

ZSSC3122

ZSSC3123

NOTE: PINK FONT INDICATES AUTOMOTIVE QUALIFIED PRODUCTS

Supply Voltage Range Supply Voltage Range Supply Voltage Range Resistive SSC Automotive Resistive SSC Capacitive SSC ZSSC3218: ZSSC3027: ZSSC3016: ZSSC3026: ZSSC3036: ZSC31010: ZSC31014: ZSC31015:

1.68 to 3.6 V 1.7 to 3.6 V 1.8 to 3.6 V 1.8 to 3.6 V 1.8 to 3.6 V 2.7 to 5.5 V * 2.7 to 5.5 V 2.7 to 5.5 V *

* 5.5 to 30 V with external JFET ** 5 to 40 V with external JFET

ZSSC3015: ZSC31050: ZSC31150: ZSSC3131: ZSSC3135: ZSSC3136: ZSSC3138: ZSSC3154: ZSSC3170: ZSSC4161: ZSSC4162: ZSSC4165: ZSSC4169: ZSSC4171: ZSSC4179: ZSSC5101:

2.7 to 5.5 V * 2.7 to 5.5 V ** 4.5 to 5.5 V 4.5 to 5.5 V 4.5 to 5.5 V 4.5 to 5.5 V 4.5 to 5.5 V 4.5 to 5.5 V 7 to 18 V 4.75 to 5.25V 4.75 to 5.25V 4.75 to 5.25V 4.75 to 5.25V 4.75 to 5.25V 4.75 to 5.25V 4.5 to 5.5 V

ZSSC3122: 1.8 to 5.5 V ZSSC3123: 2.3 to 5.5 V

The modular Sensor Signal Conditioner (SSC) Evaluation Kits are designed to provide an overview of the functions and configuration options for ZMDI’s SSC IC Family. These kits provide support for newcomers and experienced users. To evaluate different SSCs with a ZMDI modular kit, simply interchange the IC-specific SSC Evaluation Boards and software designed specifically for the SSCs. Each SSC Evaluation Board is simple to connect and operate. ICs under test are installed in a common ZIF-socket for easy interchange. On-board LEDs display the status of the power supply and, if applicable, the status of digital outputs (e.g., alarm signals for the ZSC31050). Several connectors allow access to all I/O signal lines for the SSC for simple system verification. Screw terminals can be used to connect actual sensor elements. Initial evaluation of the SSC can be done with a Sensor Replacement Board.

Visit .com for more detailed information

Mobile Sensing Smart and Mobile

速

pink is the new green enabling energy efficient solutions

Mobile Sensing from ZSSC3016, ZSSC3026, ZSSC3027, ZSSC3036, ZSSC3218, ZOPT3100

Types of ZMDI‘S Mobile Sensing ICs ZMDI‘s Mobile Sensor Signal Conditioner (SSC) Family ICs interface with three main sensor types: capacitive, resistive, and optical sensors. Our energy-efficient, battery-optimized SSCs enable diverse mobile applications, with current consumption as low as 930μA in operating mode or 20nA in sleep mode. ZMDI’s mobile SSC ICs offer digital compensation of sensor offset, sensitivity, temperature drift, and non-linearity in operational temperature ranges as wide as -40°C to +125°C.

Mobile Sensing ICs from ZMDI Industry leaders are predicting double-digit growth for the global market for mobile sensors, which is expected to expand to over 22 billion dollars by 2018. ZMDI’s next-generation sensing technology can shorten critical time-to-market essential to meeting the increasing demands for smaller mobile products with more sophisticated features. Given ZMDI’s focus on designing best-in-class energy efficient solutions that reduce the demand for energy consumption, it is clear why market leaders build long-term relationships with ZMDI. With new solutions rapidly emerging in the market for mobile sensing systems and higher levels of integration driving new development, ZMDI is well placed to offer solutions that advance opportunities in this high-growth market. With highly integrated products providing advanced signal conditioning and sensing capabilities, ZMDI is positioned to be a true partner to tierone suppliers, emerging market suppliers, MEMS suppliers, and reference design houses. For example, our ZOPT3100 includes an ambient light sensor (ALS), a color sensor (CS), a proximity sensor (PS), and an integrated IR LED driver on a single chip.

Visit .com for more detailed information

Key Features for ZMDI Mobile Sensor ICs • High accuracy and resolution for precise sensor signal conditioning • Best-in-class power consumption, accuracy, and resolution • Small package size and flexible delivery forms • Minimal number of external components • Single-pass calibration

ZMDI – Mobile Sensing Strengths • Core expertise: over 50 years of technical expertise in sensor signal conditioning • Provider of highly integrated sensor ICs optimized for mobile sensing solutions • Innovative partner for next generation platforms and emerging technology • Strategic alliances with partners that manufacture modules enabled by ZMDI’s advanced IC solutions

Applications for ZMDI Mobile Sensor ICs Innovative mobile sensing solutions based on diverse sensor technologies for various highvolume applications in mobile sensing: • Altimeter/barometric • Proximity sensing • Ambient light/color sensing • Temperature sensing • Vital parameter sensing • Humidity sensing

ZMDI – Focused on Energy Efficiency HUMMINGBIRDS are the fastest and most agile birds, yet they are also the most energy efficient. As an “intelligent consumer“ of energy, the hummingbird best represents ZMDI‘s ICs for mobile sensing.

Innovative environmental mobile sensing solutions based on advanced sensor technologies

Barometric Pressure Sensor

Humidity

High precision sensor for use in indoor navigation and fitness applications (stair counting)

High-precision humidity sensors for weather stations

Gas (available soon)

VOC, ethanol, CO measurement for various mobile applications including personal safety

Optical Sensor • ALS/proximity RGB/proximity sensor for display control • RGB sensor for picture and flash light improvement • UV sensor for personal protection

Thermopile (Non-contact Temperature Sensor) • Human body temperature • Object temperature

Optical Sensor With our accurate UVA/UVB sensor, we can calculate the UV-index everywhere in the world and also the time the user can stay in the sun

Thermopile The thermopile sensors can measure the temperature of an object without requiring to be in direct contact.

Did you know that Mobile Sensing ICs from ZMDI ... ... are used in well-known brands for smart phones as well as tablets and smart watches? ... are able to detect UV-A and UV-B rays as well as proximity and ambient light and let a user know if they have been in the sun too long? ... are being developed to alert users to the presence of dangerous gasses such as carbon monoxide? ... are being used to give accurate information about user’s elevation? … are being used for accurate body temperature?

Sensor Interface IC Solutions

Products available at

On-Line Store

ZSSC3016 ZSSC3016

Low Power Sensor Signal Conditioner Low Power 16 16 Bit Bit Sensor Signal Conditioner IC IC

ZSSC3016

Low Power 16-Bit Sensor Signal Conditioner IC

Brief Description Brief Description

Benefits Benefits

ZSSC3016 a sensor signal conditioner (SSC) TheThe ZSSC3016 is aissensor signal conditioner (SSC) integrated circuit high-accuracy amplification amplification andand integrated circuit for for high-accuracy analog-to-digital conversion a differential input analog-to-digital conversion of of a differential input signal. Designed high-resolution altimeter module signal. Designed for for high-resolution altimeter module applications, ZSSC3016 perform offset, applications, thethe ZSSC3016 cancan perform offset, st st nd nd order temperature compensaspan, 2 2order temperature compensaspan, andand 1 1andand of the measured signal. Developed correctiontion of the measured signal. Developed for for correcof resistive bridge sensors, it can also provide tiontion of resistive bridge sensors, it can also provide a a corrected temperature output measured corrected temperature output measured withwith an an internal sensor. internal sensor.



Integrated Integrated 18-bit calibration math DSP 18-bit calibration math DSP



Fully Fully corrected signal at digital output corrected signal at digital output



Minimize Minimize calibration costs through one-pass calibration costs through thethe one-pass



  

 

Support Support 

Evaluation Evaluation Kit Kit

Physical Characteristics Physical Characteristics 

Supply Supply voltage range: to 3.6V voltage range: 1.81.8 to 3.6V



Current Current consumption: 1mA (operating mode) consumption: 1mA (operating mode)



Sleep Sleep State current: 70nA (25°C) State current: 70nA (25°C)



Temperature Temperature resolution: <0.003K/LSB resolution: <0.003K/LSB



Operation Operation temperature: –40°C to +85 temperature: –40°C to +85 °C °C



Small Small diedie sizesize



Delivery Delivery options: wafer bonding options: diedie for for wafer bonding

ZSSC3016 Application Example ZSSC3016 Application Example

Flexible, Flexible, programmable analog front-end design; programmable analog front-end design;

to 16-bit scalable, charge-balancing, twoup up to 16-bit scalable, charge-balancing, twosegment analog-to-digital converter (ADC) segment analog-to-digital converter (ADC) Fully Fully programmable gain amplifier optimizing programmable gain amplifier for for optimizing sensor signals: gain range to 72 (linear factor) sensor signals: gain range 14 14 to 72 (linear factor) Internal Internal auto-compensated temperature sensor auto-compensated temperature sensor Digital Digital compensation of individual sensor offset; compensation of individual sensor offset; st st nd nd order digital compensation of sensor andand 2 2order digital compensation of sensor 1 1 gain gain st st nd nd Digital Digital compensation order tempercompensation of 1of 1 andand 2 2order temperature gain and offset drift ature gain and offset drift Intelligent Intelligent power management power management unitunit Typical Typical sensor elements achieve accuracy sensor elements cancan achieve accuracy of of better than ±0.10% FSO @ -40 to 85 better than ±0.10% FSO @ -40 to 85 °C °C

VSS VDD

VSS

VDD

EOC

VSS

VDD

EOC

ry Battery

Batte

SensorSensor ModuleModule

VDD

VSS

EOC

SEL ZSSC3016 ZSSC3016

SEL

VSSB VSSB INN

Sensor Sensor3 Bridge Bridge 2

INN

VDDB VDDB

VPP

INP

VPP

MISO

MOSI SDA

SCLK SCLK SCL SCL

SEL

MISO

Microcontroller Microcontroller

Signal Output / Post-processing

Features Features



Signal Output / Post-processing

measured corrected bridge values TheThe measured andand corrected bridge values areare provided digital output pins, which provided at at thethe digital output pins, which cancan be be 2 2 (≤ 3.4MHz) (≤ 20MHz). configured I C™* (≤ 3.4MHz) or or SPISPI (≤ 20MHz). configured as as I C™* Digital compensation signal offset, sensitivity, Digital compensation of of signal offset, sensitivity, temperature, and non-linearity is accomplished temperature, and non-linearity is accomplished via via 18-bit internal digital signal processor (DSP) an an 18-bit internal digital signal processor (DSP) running a correction algorithm. Calibration coefficirunning a correction algorithm. Calibration coefficients stored on-chip a highly reliable, nonents areare stored on-chip in in a highly reliable, nonvolatile, multiple-time programmable (MTP) memory. volatile, multiple-time programmable (MTP) memory. Programming ZSSC3016 is simple serial Programming thethe ZSSC3016 is simple via via thethe serial interface PC-controlled calibration software calibration software interface andand thethe PC-controlled provided in the ZMDI Development interface provided in the ZMDI Development Kit.Kit. TheThe interface is used PC-controlled calibration procedure, calibration procedure, is used for for thethe PC-controlled which programs of calibration coefficients which programs thethe setset of calibration coefficients in in memory. digital mating precise, memory. TheThe digital mating is is fastfast andand precise, eliminating overhead normally associated withwith eliminating thethe overhead normally associated trimmingexternal externalcomponents componentsandandmulti-pass multi-pass trimming calibration routines. calibration routines.



calibration concept calibration concept No No external trimming components required external trimming components required Highly Highly integrated CMOS design integrated CMOS design Layout Layout customized die-die bonding customized for for die-die bonding withwith sensor high-density chip-on-board assembly sensor for for high-density chip-on-board assembly Excellent Excellent low-voltage low-power battery for for low-voltage andand low-power battery applications applications

MOSI_SDA MOSI_SDA

SCLK_SCL SCLK_SCL

VPP 6.75V … programming 6.75V … programming voltage for setup & calibration voltage for setup & calibration

* I2isC™ is a trademark of NXP. * I2C™ a trademark of NXP.

more information, contact ZMDI SSC@zmdi.com. ForFor more information, contact ZMDI via via SSC@zmdi.com. © 2014 Zentrum Mikroelektronik Dresden AG — Rev. 1.04— August 27, 2014. All rights reserved. The material contained herein maybe notreproduced, be reproduced, adapted, merged, translated, © 2014 Zentrum Mikroelektronik Dresden AG — Rev. 1.04— August 27, 2014. All rights reserved. The material contained herein may not adapted, merged, translated, stored, or used without the prior written consent the copyright owner. The information furnished this publication is subject to changes without notice. stored, or used without the prior written consent of theofcopyright owner. The information furnished in thisinpublication is subject to changes without notice.

Visit .com for more detailed information

ZSSC3016

Low Power 16 Bit Sensor Signal Conditioner IC

Applications The ZSSC3016 is designed for operation in calibrated resistive (e.g., pressure) sensor modules:

ZSSC3016 Block Diagram

 Barometric altitude measurement for portable

navigation

 Altitude measurement for emergency call

systems and car navigation

 Inside hard disk pressure measurement  Weather forecast  Fan control

Ordering Information (Contact ZMD Ordering Examples Applications The ZSSC3016 is designed for operation in calibrated resistive (e.g., pressure) sensor modules:  Barometric altitude measurement for portable

navigation

 Altitude measurement for emergency call

systems and car navigation

ZSSC3016CC1B

Temperature range: – according to section 1

ZSSC3016CI1B

Temperature range: – to section 1 of the dat

ZSSC3016CI1D ES

Engineering samples,

ZSSC3016KIT

ZSSC3016 Evaluation (Evaluation Software

 Inside hard disk pressure measurement  Weather forecast  Fan control

Sales and Further Information Zentrum Mikroelektronik Dresden AG Global Headquarters Grenzstrasse 28 01109 Dresden, Germany

Ordering Information (Contact ZMDI Sales for additional options.) Ordering Examples ZSSC3016CC1B

Description Temperature range: –40°C to +85°C, consumer-level according to section 1 of the data sheet

Central Office: parameters Wafer Phone +49.351.8822.306 Fax +49.351.8822.337

ZMD America, Inc. 1525 McCarthy Blvd., Milpitas, CA 95035-74 USA

Package

USA Phone 1.855.275

(304µm) unsawn Phone +1.408.883.63 Fax

+1.408.883.63

ZSSC3016CI1B

Temperature range: –40°C to +85°C, industrial-level parameters according Wafer (304µm) unsawn European Technical Support DISCLAIMER: This inform to section 1 of the data sheet, 10 years MTP data retention

ZSSC3016CI1D ES

Engineering samples, temperature range: –40°C to +85°C

ZSSC3016KIT

European Sales (Stuttgart) ZSSC3016 Evaluation Kit, including sample and modular evaluation board Kit Phone +49.711.674517.55 (Evaluation Software is downloadable from www.zmdi.com/zssc3016) Fax +49.711.674517.87955

Sales and Further Information

www.zmdi.com

Zentrum Mikroelektronik D Phone +49.351.8822.7.772 Fax +49.351.8822.87.772 Dice in waffleinformation pack furnished here

licensee, or any other thir in any way related to the f customer, licensee or any any damages in connectio tort (including negligence)

mobile.sensing@zmdi.com

Zentrum Mikroelektronik Dresden AG Global Headquarters Grenzstrasse 28 01109 Dresden, Germany

ZMD America, Inc. 1525 McCarthy Blvd., #212 Milpitas, CA 95035-7453 USA

Central Office: Phone +49.351.8822.306 Fax +49.351.8822.337

USA Phone 1.855.275.9634 Phone +1.408.883.6310 Fax +1.408.883.6358

European Technical Support Phone +49.351.8822.7.772 Fax +49.351.8822.87.772

European Sales (Stuttgart) Phone +49.711.674517.55 Fax +49.711.674517.87955

Zentrum Mikroelektronik Dresden AG, Japan Office 2nd Floor, Shinbashi Tokyu Bldg. 4-21-3, Shinbashi, Minato-ku Tokyo, 105-0004 Japan

ZMD FAR EAST, Ltd. 3F, No. 51, Sec. 2, Keelung Road 11052 Taipei Taiwan

Phone +81.3.6895.7410 Fax +81.3.6895.7301

Phone +886.2.2377.8189 Fax +886.2.2377.8199

Sensor Interface IC Solutions

Products available at

On-Line Store

© 2014 Zentrum Mikroelektronik Dresden AG — Rev. 1.04— August 27, 2014. All rights reserved. The material contained herein may not be reproduced, adapted, merged, translated, stored, or used without the prior written consent of the copyright owner.

ZSSC3026 ZSSC3026

Low-Power, Low-Power, High-Resolution High-Resolution 16-Bit 16-Bit Sensor Sensor Signal Signal Conditioner Conditioner

ZSSC3026

Low Power 16-Bit Sensor Signal Conditioner IC

Brief Brief Description Description

Benefits Benefits

The The ZSSC3026 ZSSC3026 is a is sensor a sensor signal signal conditioner conditioner (SSC) (SSC) integrated circuit for high-accuracy amplification and and integrated circuit for high-accuracy amplification analog-to-digital conversion of aofdifferential inputinput analog-to-digital conversion a differential signal. Developed for correction of resistive bridge signal. Developed for correction of resistive bridge sensors and and optimized for high-resolution altimeter sensors optimized for high-resolution altimeter module applications, the the ZSSC3026 can can perform module applications, ZSSC3026 perform st st nd nd 1 and 2 order 2 order temperature temperature com-comoffset, span, and and offset, span, 1 and pensation of the signal. It can also also provide pensation of measured the measured signal. It can provide a corrected temperature output measured with with an an a corrected temperature output measured The The corrected measurement values internal sensor. internal sensor. corrected measurement values are provided at the output pins,pins, which can can be be are provided at digital the digital output which 2 2 as I as C™* (≤3.4MHz) (≤3.4MHz) or SPI or SPI (≤ 20MHz). (≤ 20MHz). configured configured I C™*



Digital compensation of signal the signal offset, sensitivity, Digital compensation of the offset, sensitivity, temperature, non-linearity is accomplished temperature, and and non-linearity is accomplished via via an 18-bit internal digital signal processor (DSP) an 18-bit internal digital signal processor (DSP) run- runningning a correction algorithm. Calibration coefficients a correction algorithm. Calibration coefficients in a inhighly reliable, non-volatile, are stored on-chip are stored on-chip a highly reliable, non-volatile, multiple-time programmable (MTP) memory. Progmultiple-time programmable (MTP) memory. Programming the IC via the interface. An An ramming theisICsimple is simple via serial the serial interface. internal charge pump provides the the programming internal charge pump provides programming The The interface is used for the voltage. voltage. interface is used for PC-controlled the PC-controlled calibration procedure, which programs the the calibracalibration procedure, which programs calibration tion coefficients in memory. The The digital mating is fast coefficients in memory. digital mating is fast and and precise, eliminating the the overhead normally precise, eliminating overhead normally with with trimming external components and and associated associated trimming external components multi-pass calibration routines. multi-pass calibration routines.



Features Features



      

Flexible,  Flexible, programmable programmable analog analog front-end front-end design; design; up toup 16-bit to 16-bit scalable, scalable, charge-balancing charge-balancing two-twosegment segment analog-to-digital analog-to-digital converter converter (ADC) (ADC) Fully  Fully programmable programmable gaingain amplifier amplifier accepting accepting sensors sensors fromfrom 14 to14 72to(linear 72 (linear factor) factor) Internal  Internal auto-compensated auto-compensated temperature temperature sensor sensor Digital  Digital compensation compensation of individual of individual sensor sensor offset; offset; st st nd nd 2 order 2 order compensation compensation of sensor of sensor gaingain 1 and 1 and st st nd nd Digital  Digital compensation compensation of 1 ofand 1 and 2 order 2 order tem-temperature perature gaingain and and offset offset drift drift Intelligent  Intelligent power power management management unit unit Layout  Layout customized customized for die-die for die-die bonding bonding with with sensor sensor for high-density for high-density chip-on-board chip-on-board assembly assembly Typical  Typical sensor sensor elements elements can achieve can achieve accuracy accuracy of of better better thanthan ±0.10% ±0.10% FSOFSO @ -40 @ to -40110°C to 110°C

   

Excellent  Excellent for low-voltage for low-voltage and and low-power low-power battery battery applications applications Integrated  Integrated 18-bit 18-bit calibration calibration mathmath DSPDSP Costs  Costs minimized minimized via one-pass via one-pass calibration calibration No  external No external trimming trimming components components required required Highly  Highly integrated integrated CMOS CMOS design design

Physical Physical Characteristics Characteristics      

Supply  Supply voltage voltage range: range: 1.8 to 1.83.6V to 3.6V Current  Current consumption: consumption: 1mA1mA (operating (operating mode) mode) Sleep  Sleep StateState current: current: 50nA50nA (typical) (typical) Temperature  Temperature resolution: resolution: <0.003K/LSB <0.003K/LSB Operation  Operation temperatures temperatures depending depending on part on part number: number: –40°C –40°C to +85°C; to +85°C; –40°C –40°C to +110°C to +110°C Small  Small die size die size Delivery  Delivery options: options: die for diewafer for wafer bonding, bonding, bumped bumped die for dieFlip for Flip Chip,Chip, PQFN24 PQFN24

Typical Typical Applications Applications The The ZSSC3026 ZSSC3026 is designed is designed for operation for operation in in calibrated calibrated resistive resistive (pressure) (pressure) sensor sensor modules: modules: 

  

Barometric  Barometric altitude altitude measurement measurement for portable for portable navigation navigation Altitude  Altitude measurement measurement for emergency for emergency call call systems systems and and car navigation car navigation Inside  Inside hardhard disk disk pressure pressure measurement measurement Weather  Weather forecast forecast Fan  Fan control control

ZSSC3026 ZSSC3026 Application Application Example Example

2 * I2C™ * Iis C™ a registered is a registered trademark trademark of NXP. of NXP.

For more For more information, information, contact contact ZMDIZMDI via mobile.sensing@zmdi.com. via mobile.sensing@zmdi.com. © 2014©Zentrum 2014 Zentrum Mikroelektronik Mikroelektronik Dresden Dresden AG — Rev.1.04 AG — Rev.1.04 — August — August 27, 2014. 27, All 2014. rights Allreserved. rights reserved. The material The material contained contained herein may herein notmay be not reproduced, be reproduced, adapted, adapted, merged, merged, translated, translated, stored, stored, or usedorwithout used without the prior the written prior written consentconsent of the copyright of the copyright owner. owner. The information The information furnished furnished in this publication in this publication is subject is subject to changes to changes withoutwithout notice. notice.

Visit .com for more detailed information

ZSSC3026

Low-Power, High-Resolution 16-Bit Sensor Signal Conditioner

ZSSC3026 Block Diagram

Ordering Information (Please contact Z Sales Code ZSSC3026CC1B

ZSSC3026 Die — temperatu

ZSSC3026CI1B

ZSSC3026 Die — temperatu retention

ZSSC3026CI4

ZSSC3026 PQFN24 4x4mm

ZSSC3026KIT

Evaluation Kit for ZSSC30x6 (Evaluation Software can be

Sales and Further Information Ordering Information (Please contact ZMDI Sales for additional options) Sales Code

Description

Zentrum Mikroelektronik Dresden AG Global Headquarters Grenzstrasse 28 01109 Dresden, Germany Central Office: Phone +49.351.8822.306 Fax +49.351.8822.337

ZMD America, Inc. 1525 McCarthy Blvd., #212 Milpitas, CA 95035-7453 USA

USA Phone 1.855.275.963

Package Phone +1.408.883.6310 Fax

+1.408.883.6358

ZSSC3026CC1B

ZSSC3026 Die — temperature range: –40°C to +85 °C, tested

Unsawn wafer (304µm)

ZSSC3026CI1B

ZSSC3026 Die — temperature range: –40°C to +85 °C, tested, 10 years MTP-data Unsawn wafer (304µm) European Technical Support DISCLAIMER: This information retention Zentrum Mikroelektronik Dresd

ZSSC3026CI4

ZSSC3026 PQFN24 4x4mm – temperature range: –40°C to +110 °C, Fax tested+49.351.8822.87.772

ZSSC3026KIT

Evaluation Kit for ZSSC30x6 Product Family: circuit boards, cable, 1 sample Kit Phone +49.711.674517.55 (Evaluation Software can be downloaded from www.zmdi.com/zssc3026) Fax +49.711.674517.87955

Phone +49.351.8822.7.772

European Sales (Stuttgart)

information furnished hereby i licensee, or any other third par in any way related to the furnis customer, licensee or any othe any damages in connection wi tort (including negligence), stric

Sales and Further Information

www.zmdi.com

mobile.sensing@zmdi.com

Zentrum Mikroelektronik Dresden AG Global Headquarters Grenzstrasse 28 01109 Dresden, Germany

ZMD America, Inc. 1525 McCarthy Blvd., #212 Milpitas, CA 95035-7453 USA

Central Office: Phone +49.351.8822.306 Fax +49.351.8822.337

USA Phone 1.855.275.9634 Phone +1.408.883.6310 Fax +1.408.883.6358

European Technical Support Phone +49.351.8822.7.772 Fax +49.351.8822.87.772

European Sales (Stuttgart) Phone +49.711.674517.55 Fax +49.711.674517.87955

Zentrum Mikroelektronik Dresden AG, Japan Office 2nd Floor, Shinbashi Tokyu Bldg. 4-21-3, Shinbashi, Minato-ku Tokyo, 105-0004 Japan

ZMD FAR EAST, Ltd. 3F, No. 51, Sec. 2, Keelung Road 11052 Taipei Taiwan

Phone +81.3.6895.7410 Fax +81.3.6895.7301

Phone +886.2.2377.8189 Fax +886.2.2377.8199

Sensor Interface IC Solutions

© 2014 Zentrum Mikroelektronik Dresden AG — Rev.1.04 — August 27, 2014. All rights reserved. The material contained herein may not be reproduced, adapted, merged, translated, stored, or used without the prior written consent of the copyright owner. The information furnished in this publication is subject to changes without notice.

Products available at

On-Line Store

ZSSC3027

Low-Power 16-Bit Sensor Signal Conditioner IC

ZSSC3027

Low Power 16-Bit Sensor Signal Conditioner IC

Brief Description

Benefits

The ZSSC3027 is a sensor signal conditioner (SSC) integrated circuit for high-accuracy amplification and analog-to-digital conversion of a differential input signal. Designed for high-resolution altimeter module applications, the ZSSC3027 can perform offset, st nd span, and 1 and 2 order temperature compensation of the measured signal. Developed for correction of resistive bridge sensors, it can also provide a corrected temperature output measured with an internal sensor. The measured and corrected bridge values are provided at the digital output pins, which can be 2 configured as I C™* (≤ 3.4MHz) or SPI (≤ 20MHz). Digital compensation of signal offset, sensitivity, temperature, and non-linearity is accomplished via an 18-bit internal digital signal processor (DSP) running a correction algorithm. Calibration coefficients are stored on-chip in a highly reliable, non-volatile, multiple-time programmable (MTP) memory. Programming the ZSSC3027 is simple via the serial interface. The IC-internal charge pump provides the MTP programming voltage. The interface is used for the PC-controlled calibration procedure, which programs the set of calibration coefficients in memory. The ZSSC3027 provides accelerated signal processing in order to support high-speed control, safety, and real-time sensing applications. It complements ZMDI’s ZSSC30x6 products.

  

 

     

Integrated 18-bit calibration math DSP Fully corrected signal at digital output One-pass calibration minimizes calibration costs No external trimming, filter, or buffering components required Highly integrated CMOS design Excellent for low-voltage and low-power battery applications Optimized for operation in calibrated resistive sensor modules

Physical Characteristics       

Supply voltage range: 1.7 to 3.6V Operating mode current consumption: 930µA (typical) Sleep State current: 20nA (typical) Temperature resolution: <0.003K/LSB Operation temperatures: –40°C to +85°C Small die size Delivery options: die for wafer bonding

Available Support  

ZSSC3026 Evaluation Kit can be used to evaluate ZSSC3027 capabilities Support Documentation

ZSSC3027 Application Example

Features 



Flexible, programmable analog front-end design; up to 16-bit scalable, charge-balancing twosegment analog-to-digital converter (ADC) Fully programmable gain amplifier accepting sensors from 14 to 72 (linear factor) Internal auto-compensated temperature sensor Digital compensation of individual sensor offset; st nd 1 and 2 order digital compensation of sensor st nd gain as well as of 1 and 2 order temperature gain and offset drift Layout optimized for stacked-die bonding for high-density chip-on-board assembly Typical sensor elements can achieve accuracy of better than ±0.10% FSO** @ -40 to 85°C

* I2C™ is a trademark of NXP. ** FSO = Full Scale Output.

For more information, contact ZMDI via mobile.sensing@zmdi.com. © 2014 Zentrum Mikroelektronik Dresden AG — Rev. 1.01— August 24, 2014. All rights reserved. The material contained herein may not be reproduced, adapted, merged, translated, stored, or used without the prior written consent of the copyright owner. The information furnished in this publication is subject to changes without notice.

Visit .com for more detailed information

ZSSC3027

Sensor Bridge

Low-Power 16-Bit Sensor Signal Conditioner IC

ZSSC3027 Block Diagram

VDDB VTP

Sensor Bridge

AGND / CM Generator

Multiplexer

VTN

Temperature Reference Sensor

INP INN

Applications  Barometric altitude measurement for portable navigation or emergency call systems  Altitude measurement for car navigation Vreg int  Inside hard disk pressure measurement VDD  Weather forecast Voltage Bias Current  Fan control Generator Regulator VSS Power Ctr.  Industrial, pneumatic, and liquid pressure  High-resolution temperature measurements ZSSC3027 A

18-bit DSP Core

16 Bit

Sales Code Power-ON Reset

EOC

(Calculations, OrderingD Information Communication) (See section 6 in the

PreAmplifier

VSSB

Applications  Barometric altitude measurement for portable navigation or emergency call systems  Altitude measurement for car navigation  Inside hard disk pressure measurement  Weather forecast  Fan control  Industrial, pneumatic, and liquid pressure  High-resolution temperature measurements

Clock Generator

Description

ZSSC3027AC1B

System Control ZSSC3027AC6B Ring Unit Oscillator

SCLK/SCL SS

SPI Die—temperature range: –40°C MOSI/SDA MTP

ROM

MISO

I²C Die—temperature range: –40°C SEL

ZSSC3027AC7C

Die—temperature range: –40°C

ZSSC3027AI1D

Engineering samples, die—tem

ZSSC3026-KIT

Evaluation Kit for ZSSC3026, i (equivalent to ZSSC3027—kit

Sales and Further Information

Ordering Information (See section 6 in the data sheet for additional options

Zentrum Mikroelektronik Dresden AG Global Headquarters Grenzstrasse for delivery)28 01109 Dresden, Germany

ZMD America, Inc. 1525 McCarthy Blvd., #212 Milpitas, CA 95035-7453 USA

Central Office: Package Delivery Phone +49.351.8822.306 Fax +49.351.8822.337

USA Phone 1.855.275.9634 Phone +1.408.883.6310 Fax +1.408.883.6358

Sales Code

Description

ZSSC3027AC1B

Die—temperature range: –40°C to +85 °C

ZSSC3027AC6B

Die—temperature range: –40°C to +85 °C

ZSSC3027AC7C

Die—temperature range: –40°C to +85°C

ZSSC3027AI1D

in any way related to the furnishing, Engineering samples, die—temperature range: –40°C to +85°C European DiceSales in waffle pack (304µm) (Stuttgart)

ZSSC3026-KIT

damages in connection with or Evaluation Kit for ZSSC3026, including boards, cable, software, Fax and 1+49.711.674517.87955 ZSSC3026 PQFN24any sample tort (including negligence), strict liab (equivalent to ZSSC3027—kit is recommended for evaluation of the capabilities of the ZSSC3027)

Wafer (304µm) unsawn, tested Wafer (725µm) unsawn, tested

European Technical Support DISCLAIMER: This information app Mikroelektronik Dresden A Phone +49.351.8822.7.772 Wafer (200µm) unsawn,Zentrum tested information furnished hereby is bel Fax +49.351.8822.87.772

licensee, or any other third party for

Phone +49.711.674517.55

Sales and Further Information

www.zmdi.com

customer, licensee or any other thir

mobile.sensing@zmdi.com

Zentrum Mikroelektronik Dresden AG Global Headquarters Grenzstrasse 28 01109 Dresden, Germany

ZMD America, Inc. 1525 McCarthy Blvd., #212 Milpitas, CA 95035-7453 USA

Central Office: Phone +49.351.8822.306 Fax +49.351.8822.337

USA Phone 1.855.275.9634 Phone +1.408.883.6310 Fax +1.408.883.6358

European Technical Support Phone +49.351.8822.7.772 Fax +49.351.8822.87.772

European Sales (Stuttgart) Phone +49.711.674517.55 Fax +49.711.674517.87955

Zentrum Mikroelektronik Dresden AG, Japan Office 2nd Floor, Shinbashi Tokyu Bldg. 4-21-3, Shinbashi, Minato-ku Tokyo, 105-0004 Japan

ZMD FAR EAST, Ltd. 3F, No. 51, Sec. 2, Keelung Road 11052 Taipei Taiwan

Phone +81.3.6895.7410 Fax +81.3.6895.7301

Phone +886.2.2377.8189 Fax +886.2.2377.8199

Sensor Interface IC Solutions

© 2014 Zentrum Mikroelektronik Dresden AG — Rev. 1.01—August 24, 2014. All rights reserved. The material contained herein may not be reproduced, adapted, merged, translated, stored, or used without the prior written consent of the copyright owner.

Products available at

On-Line Store

ZSSC3036

Low-Power 16-Bit Sensor Signal Conditioner IC

ZSSC3036

Low Power 16-Bit Sensor Signal Conditioner IC

Brief Description

Benefits

The ZSSC3036 is a sensor signal conditioner (SSC) integrated circuit for high-accuracy amplification and analog-to-digital conversion of a differential input signal. Designed for high-resolution altimeter module applications, the ZSSC3036 can perform offset, st nd span, and 1 and 2 order temperature compensation of the measured signal. Developed for correction of resistive bridge sensors, it can also provide a corrected temperature output measured with an internal sensor. The measured and corrected bridge values are provided at the digital output pins, which can be 2 configured as I C™* (≤ 3.4MHz) or SPI (≤ 20MHz). Digital compensation of signal offset, sensitivity, temperature, and non-linearity is accomplished via an 18-bit internal digital signal processor (DSP) running a correction algorithm. Calibration coefficients are stored on-chip in a highly reliable, non-volatile, multiple-time programmable (MTP) memory. Programming the ZSSC3036 is simple via the serial interface. The IC-internal charge pump provides the MTP programming voltage. The interface is used for the PC-controlled calibration procedure, which programs the set of calibration coefficients in memory. The ZSSC3036 provides accelerated signal processing in order to support high-speed control, safety, and real-time sensing applications. It complements ZMDI’s additional ZSSC30x6 products.

Features 

  

 

Flexible, programmable analog front-end design; up to 16-bit scalable, charge-balancing twosegment analog-to-digital converter (ADC) Fully programmable gain amplifier accepting sensors from 14 to 72 (linear factor) Internal auto-compensated temperature sensor Digital compensation of individual sensor offset; st nd 1 and 2 order digital compensation of sensor st nd gain as well as of 1 and 2 order temperature gain and offset drift Fast sensing: 16-bit conditioned sensor signal -1 measurement rate at more than 200s Typical sensor elements can achieve accuracy of less than ±0.10% FSO** @ -40 to 110°C

Visit .com for more detailed information

       

Integrated 18-bit calibration math DSP Fully corrected signal at digital output Layout customized for die-die bonding with sensor for high-density chip-on-board assembly Single-pass calibration minimizes calibration costs No external trimming, filter, or buffering components required Highly integrated CMOS design Excellent for low-voltage and low-power battery applications Optimized for operation in calibrated resistive sensor modules

Physical Characteristics       

Supply voltage range: 1.8 to 3.6V Current consumption: 1mA (operating mode) Sleep State current: 50nA (typical) Temperature resolution: <0.003K/LSB Operation temperatures: –40°C to +85°C –40°C to +110°C Small die size Delivery options: die for wafer bonding

* I2C™ is a trademark of NXP. ** FSO = Full Scale Output.

ZSSC3036 Application Example

For more information, contact ZMDI via mobile.sensing@zmdi.com.

© 2014 Zentrum Mikroelektronik Dresden AG — Rev. 2.01 — August 24, 2014. All rights reserved. The material contained herein may not be reproduced, adapted, merged, translated, stored, or used without the prior written consent of the copyright owner. The information furnished in this publication is subject to changes without notice.

ZSSC3036

Sensor Bridge

Low-Power 16-Bit Sensor Signal Conditioner IC

INP INN VSSB

ZSSC3036 Block Diagram

Applications  Barometric altitude measurement for portable navigation or emergency call Vreg int systems VDD  Altitude measurement for car navigation Voltage Bias Current  Inside hard disk pressure measurement Generator Regulator VSS Powerforecast Ctr.  Weather  Fan control  Industrial, pneumatic, and liquid pressure ZSSC3036  High-resolution temperature measurements

VDDB

VTN

Sensor Bridge

INP INN

Temperature Reference Sensor

AGND / CM Generator

Multiplexer

VTP

PreAmplifier

VSSB

Clock Generator

Power-ON Reset

18-bit DSP Core

EOC (Calculations, Ordering Information (See section 6 in the d D Communication) 16 Bit

Sales Code

Description

ZSSC3036CC1B

SS Die—temperature range: –40° SPI MOSI/SDA

ROM Control ZSSC3036CI1B

I²CTM Die—temperature range: –40°

ZSSC3036CC1C

Die—temperature range: –40°

ZSSC3036CI1BH

Die—temperature range: –40°

ZSSC3036CI1CH

Die—temperature range: –40°

ZSSC30x6-KIT

Evaluation Kit for ZSSC30x6 P

MTP

System

Ring Oscillator

Unit

SCLK/SCL MISO SEL

Sales and Further Information

Zentrum Mikroelektronik ZMD America, Inc. Ordering Information (See section 6 in the data sheet for additional options for delivery package and wafer thickness of 725µm.) Dresden AG 1525 McCarthy Blvd., #212

Sales Code

Description

ZSSC3036CC1B

Die—temperature range: –40°C to +85 °C

ZSSC3036CI1B

Die—temperature range: –40°C to +85 °C, extended

ZSSC3036CC1C

Die—temperature range: –40°C to +85°C

Global Headquarters Milpitas, CA 95035-7453 Grenzstrasse 28 Delivery PackageUSA 01109 Dresden, Germany USA Phone 1.855.275.9634 Wafer (304µm) unsawn, tested Central Office: Phone +49.351.8822.306 Phone +1.408.883.6310 qualificationFax +49.351.8822.337 Wafer (304µm) unsawn, tested Fax +1.408.883.6358

Dice on frame (304µm), tested European Technical Support qualification Wafer (304µm) Phone +49.351.8822.7.772 Fax +49.351.8822.87.772

DISCLAIMER: This information ap

ZSSC3036CI1BH

Die—temperature range: –40°C to +110 °C, extended

ZSSC3036CI1CH

Die—temperature range: –40°C to +110 °C, extended qualification

ZSSC30x6-KIT

Phone +49.711.674517.55 any damages in connection with o Evaluation Kit for ZSSC30x6 Product Family, including boards, cable, software, and 1 sample Fax +49.711.674517.87955

unsawn, tested Zentrum Mikroelektronik Dresden

information furnished hereby is be

licensee, or any other third party fo Dice on frame (304µm), tested in any way related to the furnishing

European Sales (Stuttgart)

customer, licensee or any other th

tort (including negligence), strict lia

Sales and Further Information

www.zmdi.com

mobile.sensing@zmdi.com

Zentrum Mikroelektronik Dresden AG Global Headquarters Grenzstrasse 28 01109 Dresden, Germany

ZMD America, Inc. 1525 McCarthy Blvd., #212 Milpitas, CA 95035-7453 USA

Central Office: Phone +49.351.8822.306 Fax +49.351.8822.337

USA Phone 1.855.275.9634 Phone +1.408.883.6310 Fax +1.408.883.6358

European Technical Support Phone +49.351.8822.7.772 Fax +49.351.8822.87.772

European Sales (Stuttgart) Phone +49.711.674517.55 Fax +49.711.674517.87955

Zentrum Mikroelektronik Dresden AG, Japan Office 2nd Floor, Shinbashi Tokyu Bldg. 4-21-3, Shinbashi, Minato-ku Tokyo, 105-0004 Japan

ZMD FAR EAST, Ltd. 3F, No. 51, Sec. 2, Keelung Road 11052 Taipei Taiwan

Phone +81.3.6895.7410 Fax +81.3.6895.7301

Phone +886.2.2377.8189 Fax +886.2.2377.8199

Sensor Interface IC Solutions

© 2014 Zentrum Mikroelektronik Dresden AG — Rev. 2.01— August 24, 2014. All rights reserved. The material contained herein may not be reproduced, adapted, merged, translated, stored, or used without the prior written consent of the copyright owner.

Products available at

On-Line Store

ZSSC3218

High-End 18-Bit Sensor Signal Conditioner IC

ZSSC3218

High-End 18-Bit Sensor Signal Conditioner IC

Brief Description

Benefits

The measured and corrected sensor values are provided at the digital output pins, which can be 2 configured as I C™* (≤ 3.4MHz) or SPI (≤ 20MHz). Digital compensation of signal offset, sensitivity, temperature, and non-linearity is accomplished via a 26-bit internal digital signal processor (DSP) running a correction algorithm. Calibration coefficients are stored on-chip in a highly reliable, non-volatile, multiple-time programmable (MTP) memory. Programming the ZSSC3218 is simple via the serial interface. The interface is used for the PC-controlled calibration procedure, which programs the set of calibration coefficients in memory. The ZSSC3218 provides accelerated signal processing, increased resolution, and improved noise immunity in order to support high-speed control, safety, and real-time sensing applications with the highest requirements for energy efficiency.

Features    

  

Flexible, programmable analog front-end design; up to 18-bit analog-to-digital converter (ADC) Fully programmable gain amplifier for optimizing sensor signals: gain range 6.6 to 216 (linear) Internal auto-compensated temperature sensor Digital compensation of individual sensor offset; st nd 1 and 2 order digital compensation of sensor st nd gain as well as 1 and 2 order temperature gain and offset drift Programmable interrupt operation High-speed sensing: e.g. 16-bit conditioned -1 sensor signal measurement rate >500s Typical sensor elements can achieve an accuracy of better than ±0.10% FSO** at -40 to 85°C

Integrated 26-bit calibration math digital signal processor (DSP) Fully corrected signal at digital output Layout customized for die-die bonding with sensor for high-density chip-on-board assembly One-pass calibration minimizes calibration costs No external trimming, filter, or buffering components required Highly integrated CMOS design Integrated reprogrammable non-volatile memory Excellent for low-voltage and low-power battery applications Optimized for operation in calibrated resistive (e.g., pressure) sensor or calibrated absolute voltage (e.g., thermopile) sensor modules

        

Physical Characteristics Supply voltage range: 1.68V to 3.6V Current consumption: 1.0mA (operating mode) Sleep State current: 20nA (typical) Temperature resolution: <0.003K/LSB Best-in-class energy-efficiency: with 16-bit resolution: <140pJ/step with 18-bit resolution: <50pJ/step Operation temperature: –40°C to +85°C Small die size Delivery options: die for wafer bonding

    

  

* I2C™ is a trademark of NXP. ** FSO = Full Scale Output.

ZSSC3218 Application Example VSS VDD VDD

Batte

Stacked-Die Sensor Module VDD VSS

ZSSC3218 VDDB

RES

sensor element

MISO

INP VSSB

INN EOC

MISO

INP(+)

RES VDDB

EOC

VSS

INN(-)

VSSB

MOSI SDA

MOSI SDA SCLK SCL

Microcontroller

Signal Output / Post-processing

The ZSSC3218 is a sensor signal conditioner (SSC) integrated circuit for high-accuracy amplification and analog-to-digital conversion of a differential or pseudo-differential input signal. Designed for highresolution sensor module applications, the st nd ZSSC3218 can perform offset, span, and 1 and 2 order temperature compensation of the measured signal. Developed for correction of resistive bridge or absolute voltage sensors, it can also provide a corrected temperature output measured with an internal sensor.

SCLK SCL

For more information, contact ZMDI via mobile.sensing@zmdi.com. © 2014 Zentrum Mikroelektronik Dresden AG — Rev. 1.03 — November 17, 2014. All rights reserved. The material contained herein may not be reproduced, adapted, merged, translated, stored, or used without the prior written consent of the copyright owner. The information furnished in this publication is subject to changes without notice.

Visit .com for more detailed information

Bridge

ZSSC3218

INN VSSB

High-End 18-Bit Sensor Signal Conditioner IC Applications  Barometric altitude measurement for portable navigation or emergency call systems  Altitude measurement for car navigation Vreg int  Weather forecast  Fan control VDD Voltage and liquid pressure Bias Current  Industrial, pneumatic, Generator Regulator  High-resolution Power Ctr. temperature measurements VSS  Object-temperature radiation (via thermopile)

VDDB

ZSSC3218 Block Diagram

VTP VTN

Temperature Reference Sensor

AGND / CM Generator

INP

Sensor Bridge

INN

Multiplexer

ZSSC3218 Sales Code A PreAmplifier

VSSB

Applications  Barometric altitude measurement for portable navigation or emergency call systems  Altitude measurement for car navigation  Weather forecast  Fan control  Industrial, pneumatic, and liquid pressure  High-resolution temperature measurements  Object-temperature radiation (via thermopile)

Power-ON Reset

Clock Generator

Oscillator

Description DSP Core EOC (Calculations, D Communication) ZSSC3218BI1B Die—temperature 18 Bit

ZSSC3218BI2B

Die—temperature range: – SCLK/SCL (w/o backlapping) SS

SPI

MOSI/SDA

System ZSSC3218BI1D ES

Die—temperature range: – MISO TM I²C engineering RES samples

ZSSC3218BI3R ES

PQFN24—temperature ran samples

Control Unit

MTP

Sales and Further Information Zentrum Mikroelektronik Dresden AG Global Headquarters Grenzstrasse 28 Package 01109 Dresden, Germany

ZMD America, Inc. 1525 McCarthy Blvd., #212 Milpitas, CA 95035-7453 USA

Central Unsawn Office: wafer Phone +49.351.8822.306 Fax +49.351.8822.337

USA Phone 1.855.275.9634 Phone +1.408.883.6310 Fax +1.408.883.6358

Sales Code

Description

ZSSC3218BI1B

Die—temperature range: –40°C to +85 °C; thickness 304µm

ZSSC3218BI2B

Die—temperature range: –40°C to +85 °C; thickness 725µm (w/o backlapping)

ZSSC3218BI1D ES

Die—temperature range: –40°C to +85 °C; thickness 304µm, engineering samples

European Technical Support Sawn die in waffle Phone +49.351.8822.7.772 Fax +49.351.8822.87.772

PQFN24—temperature range: –40°C to +85 °C; engineering samples

European Sales (Stuttgart) Packaged die Phone +49.711.674517.55 Fax +49.711.674517.87955

ZSSC3218BI3R ES

range: –

Unsawn wafer

DISCLAIMER: This information ap pack Zentrum Mikroelektronik Dresden

information furnished hereby is b licensee, or any other third party f in any way related to the furnishin customer, licensee or any other th any damages in connection with tort (including negligence), strict li

Sales and Further Information

www.zmdi.com

mobile.sensing@zmdi.com

Zentrum Mikroelektronik Dresden AG Global Headquarters Grenzstrasse 28 01109 Dresden, Germany

ZMD America, Inc. 1525 McCarthy Blvd., #212 Milpitas, CA 95035-7453 USA

Central Office: Phone +49.351.8822.306 Fax +49.351.8822.337

USA Phone 1.855.275.9634 Phone +1.408.883.6310 Fax +1.408.883.6358

European Technical Support Phone +49.351.8822.7.772 Fax +49.351.8822.87.772

European Sales (Stuttgart) Phone +49.711.674517.55 Fax +49.711.674517.87955

Zentrum Mikroelektronik Dresden AG, Japan Office nd 2 Floor, Shinbashi Tokyu Bldg. 4-21-3, Shinbashi, Minato-ku Tokyo, 105-0004 Japan

ZMD FAR EAST, Ltd. 3F, No. 51, Sec. 2, Keelung Road 11052 Taipei Taiwan

Phone +81.3.6895.7410 Fax +81.3.6895.7301

Phone +886.2.2377.8189 Fax +886.2.2377.8199

Sensor Interface IC Solutions

© 2014 Zentrum Mikroelektronik Dresden AG — Rev. 1.03— November 17, 2014. All rights reserved. The material contained herein may not be reproduced, adapted, merged, translated, stored, or used without the prior written consent of the copyright owner.

Products available at

On-Line Store

ZOPT3100

Digital RGB/Ambient Light + Proximity Sensor IC

ZOPT3100

Digital RGB/Ambient Light + Proximity Sensor IC

Brief Description

ALS Features

The ZOPT3100 Sensor IC integrates an ambient light sensor (ALS), a color sensor (CS), and a proximity sensor (PS), as well as an LED driver on a single chip. The device is connected by an I²C™* interface to a microcontroller. Other I²C™ or SMBus devices can be connected to the same interface. The device has a programmable interrupt with hysteresis to respond to events and reduce the microcontroller tasks.



Dynamic range : 0.006 lux to 32,000 lux ALS measurement uses CS green filtered values Temperature compensation CS/ALS output resolution: 14 to 18 bits Linear output code 50ms conversion rate for 14-bit resolution 50Hz/60Hz light flicker immunity Fluorescent light flicker immunity

      

The device allows adjusting the brightness as well as the color of the display panel. This device can also measure distance in parallel with ALS and CS measurements in order to deactivate the touch screen during phone calls.

CS Features Temperature compensation CS/ALS output resolution: 14 to 18 bits Linear output code 50ms conversion rate for 14-bit resolution 50Hz/60Hz light flicker immunity Fluorescent light flicker immunity

  

Features   

  

 

5 integrated photodiodes (1 proximity diode and 4 diodes for white, green, blue, and red channels) 5 analog-to-digital converters (ADCs) to measure PS in parallel to ALS/CS I²C™ capable of standard mode (100kHz) or fast mode (400kHz) communication; 1.8V logic compatible Programmable interrupt function for ALS (green channel) and PS with upper and lower thresholds PS measurement parallel to ALS/CS measurements Many measurement modes: PS+ALS+CS, ALS+CS, PS+ALS, PS only, ALS only, CS only



Physical Characteristics Wide operation temperature: -40 to +90 °C Wide supply voltage: 2.4 to 3.6 V Low supply current: < 200µA (LED driver excluded) Low standby current: < 2µA

   

ZOPT3100 Application Circuit VDD

PS Features    

 

High ambient light suppression Built-in LED driver and detector Detection of movement (in/out) Cancelation of crosstalk (lowest PS value is stored and subtracted from output value to memorize the reflection quantity) Programmable pulsed LED driver: up to 125mA output current 11-bit resolution

* I2C is a trademark of NXP.

Visit .com for more detailed information

LED VDD

3.3V

3.3V VDD

VDD SCL SDA INT

PWM

SCL SDA INT

SEL AGND

LED_GND ZOPT3100

VSS Microcontroller

For more information, contact ZMDI via mobile.sensing@zmdi.com.

© 2013 Zentrum Mikroelektronik Dresden AG — Rev. 1.01 — September 13, 2013. All rights reserved. The material contained herein may not be reproduced, adapted, merged, translated, stored, or used without the prior written consent of the copyright owner. The information furnished in this publication is subject to changes without notice. 58

ZOPT3100 Digital RGB/Ambient Light + Proximity Sensor IC ZOPT3100

 Notebooks

Digital RGB/Ambient Light + Proximity Sensor IC

ZOPT3100 Block Diagram ZOPT3100 Block Diagram

Ordering Information

VDD 2.4 to 3.6V

Product Sales Code Main State Machine

ADC ADC

ZOPT3100AC6B

CS/ALS FSM

Reference

PS Zentrum FSM Dresden

Bandgap

Dual Slope ADC 11 Bit Dual Slope ADC 11 Bit IR LED PWM IR LED

 Consumer devices

PWM

LED GND

AGND

LED GND

AGND

Ordering Information ZOPT3100 die — Temperature Range: -40 to +90 °C Description ZOPT3100 Evaluation Kit, including Evaluation Board, ZOPT3100 die — Temperature Range: -40 to +90 °C cable, and 1 IC sample ZOPT3100 KIT ZOPT3100 Evaluation Kit, including Evaluation Board, cable, and 1 IC sample ZOPT3100 Application Overview - ZMDI‘s Optical Sensor IC

ZOPT3100’s Integrated

INT

I²C

SDA

SCL

SELInc. ZMD America, SDA 1525 McCarthy Blvd., #212 SCL I²C Milpitas, CA 95035-7453 SEL USA

Central Office: Phone +49.351.8822.0 Fax +49.351.8822.600

USA Phone +855.275.9634 Phone +408.883.6310 Fax +408.883.6358

OSC

European Technical Support POR OSC Phone +49.351.8822.7.772 Fax +49.351.8822.87.772 = Analog Block European Sales (Stuttgart) Phone +49.711.674517.55 Fax +49.711.674517.87955 = Analog Block

DISCLAIMER: This information applie Zentrum Mikroelektronik Dresden AG information furnished hereby is belie licensee, or any other third party for a = Digital Block to the furnishing, p in any way related customer, licensee or any other third any damages in connection with or a Digital Block tort =(including negligence), strict liabil

Package

ZOPT3100AC6B Product Sales Code ZOPT3100 KIT ZOPT3100AC6B

Information Color Sensor (CS)

Interrupt FSM

Product Sales Code Description Ordering Information

ZOPT3100’s Integrated Sales and Further Ambient Light Sensor (ALS)

INT

Mikroelektronik AG Global Headquarters PS Grenzstrasse 28 FSM 01109 Dresden, Germany

POR

IR LED Driver IR LED Driver

Interrupt FSM

Sales and Further Information

Bandgap

Notebooks Cellular phones Consumer devices Notebooks

ZOPT3100 Evaluation K cable, and 1 IC sample

CS/ALS FSM

ADC

   

Fuses

ZOPT3100 KIT

ADC ADC

Description

Fuses

ZOPT3100 die — Temp

Main State Machine

ADC ADC

 Cellular phones

IR LED Driver

VDD 2.4 to 3.6V

ADCRegulator

Applications

PWM

LED G

Regulator

Applications

IR LED

 Consumer devices

Unsawn wafer Package Kit Unsawn wafer Kit

ZOPT3100’s Integrated ZOPT3100 Physical Characteristics www.zmdi.com mobile.sensing@zmdi.com Proximity Sensor (PS)

Zentrum Mikroelektronik ZMD America, Inc. Zentrum Mikroelektronik FAR EAST,ICLtd. Zentrum Mikroelektronik • Unique, all-in-one ZMD optical sensor – • High ambient light suppression • Temperature compensation • Dynamic range: 0.006 lux to Dresden AG Dresden AG, Japan Office Dresden AG, Korea Office 1525 McCarthy Blvd., #212 3F, No. 51, Sec. 2, Sales and Further Information www.zmdi.com mobile.sensing@zmdi.com integrated ambient light sensor, color 32,000 luxHeadquarters Global Milpitas, CA 95035-7453 2nd Floor, Shinbashi Tokyu Bldg. Keelung Road U-space 1 Building • Built-in LED driver and detector • CS output resolution: 14 to Zentrum Mikroelektronik ZMD America, Inc. Zentrum Mikroelektronik ZMD FAR EAST, Ltd. Zentrum Mikroelektronik sensor, proximity sensor, and IR LED 28 uses CS USA 4-21-3, Shinbashi, Minato-ku 11052 Taipei 11th Floor, Unit JA-1102 • ALSGrenzstrasse measurement 18 bits • Detection of movement Dresden AG Dresden AG, Japan Office Dresden AG, Korea Office (in/out) 1525 McCarthy Blvd., #212 3F, No. 51, Sec. 2, 01109 Dresden, Germany Tokyo, 105-0004 Taiwan 670 Sampyeong-dong • Low-power – ideal for mobile green filtered values Global Headquarters Milpitas, CA +855.275.9634 95035-7453 Floor, Shinbashi Tokyu Bldg. Keelung Road U-space 1 Building Japan Bundang-gu, Seongnam-si • Linear output code 2nd USA Phone Central Office: applications • Cancelation ofJA-1102 cross-talk (lowest Grenzstrasse 28 USA 4-21-3, Shinbashi, Minato-ku including 11052 consumer Taipei 11th Floor, Unit Gyeonggi-do, 463-400 • Temperature compensation Phone +49.351.8822.0 Phone +408.883.6310 +81.3.6895.7410 Phone +886.2.2377.8189 PS devices, cell phones, notebooks is stored and subtracted • 50ms conversion rate Phone for 14-105-0004 01109 Dresden, Germany Tokyo, Taiwan 670value Sampyeong-dong Korea +49.351.8822.600 +408.883.6358 Fax +81.3.6895.7301 Fax +886.2.2377.8199 • ALSFax output resolution: 14 to 18 Fax Japan Bundang-gu, Seongnam-si • Current consumption: 200μA (LED from value to memorize bit resolution USA Phone +855.275.9634 Central Office: Phoneoutput +82.31.950.7679 Gyeonggi-do, 463-400 bits Phone +49.351.8822.0 Fax reflection +82.504.841.3026 Phone +408.883.6310 Phone +81.3.6895.7410 Phone +886.2.2377.8189 the driver excluded); low standby quantity) • 50Hz/60Hz light flicker Korea Fax +49.351.8822.600 +408.883.6358 Fax +81.3.6895.7301 Fax(see +886.2.2377.8199 • 50ms conversion rate for 14-bits Fax mode current:Its2μA data sheet European Technical Support DISCLAIMER: This information applies to a product under development. characteristics and specifications are subject to change without notice. • Programmable pulsed LED immunity Phone +82.31.950.7679 Zentrum Mikroelektronik Dresden AG (ZMD AG) assumes no obligation regarding future manufacture unless otherwise agreed to in writing. The resolution for conditions) Phone +49.351.8822.7.772 Fax +82.504.841.3026 driver: up to 125mA output information furnished hereby believed to be true and accurate. However, under no circumstances shall ZMD AG be liable to any customer, • Fluorescent lightisflicker Faxoutput +49.351.8822.87.772 • Maximum temperature range:of-40 • Linear code Support licensee, or anyThis other third partyapplies for anytospecial, indirect, or consequential damages any kind orare nature whatsoever of or current European Technical DISCLAIMER: information a product under incidental, development. Its characteristics and specifications subject to changearising withoutout notice. immunity in any way related to the furnishing, performance, or use of thisobligation technical regarding data. ZMDfuture AG hereby expressly disclaims any liability oftoZMD AG to The any European Sales (Stuttgart) to +90°C Zentrum Mikroelektronik Dresden AG (ZMD AG) assumes no manufacture unless otherwise agreed in writing. Phone +49.351.8822.7.772 • 50Hz/60Hz light flicker immunity customer, or hereby any other third party, any and suchaccurate. customer,However, licensee under and any other third party shall hereby waives liability ZMD AG for • 11-bit resolution informationlicensee furnished is believed to and be true no circumstances ZMD AG any be liable to of any customer, Phone +49.711.674517.55 • Supply voltage: 2.4 to 3.6 VDC Fax +49.351.8822.87.772 any damages in other connection with for or arising out ofindirect, the furnishing, performance or use of this technical whether on contract, or any third party any special, incidental, or consequential damages of anydata, kind or naturebased whatsoever arisingwarranty, out of or • Fluorescent light flicker immunity licensee, Fax +49.711.674517.87955 tort (including negligence), strict liability, or otherwise. as die in any way related to the furnishing, performance, or• Available use of this technical data. ZMD AG hereby expressly disclaims any liability of ZMD AG to any European Sales (Stuttgart) customer, licensee or any other third party, and any such customer, licensee and any other third party hereby waives any liability of ZMD AG for any damages in connection with or arising out of the furnishing, performance or use of this technical data, whether based on contract, warranty, tort AG (including negligence), strict liability, or otherwise. © 2013 Zentrum Mikroelektronik Dresden — Rev. 1.01— September 13, 2013. All rights reserved. The material contained herein may not be reproduced, adapted, merged, translated, stored, or used without the prior written consent of the copyright owner. The information furnished in this publication is subject to changes without notice.

Phone +49.711.674517.55 Fax +49.711.674517.87955

Sensor Interface IC Solutions

© 2013 Zentrum Mikroelektronik Dresden AG — Rev. 1.01— September 13, 2013. All rights reserved. The material contained herein may not be reproduced, adapted, merged, translated, stored, or used without the prior written consent of the copyright owner. The information furnished in this publication is subject to changes without notice.

Products available at

On-Line Store

Contact Name: E-Mail Address: Phone Number: ( ) Distributor/Rep. Firm:

Zentrum Mikroelektronik Dresden AG Zentrum Mikroelektronik Dresden AG Global Headquarters Grenzstrasse 28 01109 Dresden Germany

Zentrum Mikroelektronik Dresden AG, Japan Office 2nd Fl., Shinbashi Tokyu Bldg., 4-21-3, Shinbashi, Minato-ku, Tokyo, 105-0004 Japan

Zentrum Mikroelektronik Dresden AG, Korea Office Unit B, 906-1, U-Space 1 Building 660, Daewangpangyo-ro, Bundang-gu, Seongnam-si, Gyeonggi-do, 463-400 KOREA

Phone +81.3.6895.7410 Fax +81.3.6895.7301

Phone +82.31.950.7679 Fax +82.504.841.3026

European Sales (Stuttgart) Phone +49.711.674517.55 Fax +49.711.674517.87955

ZMD America, Inc. 1525 McCarthy Blvd., #212 Milpitas, CA 95035-7453 USA

Product@

Phone 1.855.275.9634 (USA) Phone +1.408.883.6310 Fax +1.408.883.6358

ZMD Far East, Ltd. 3F, No. 51, Sec. 2, Keelung Road 11052 Taipei Taiwan

Central Office Phone +49.351.8822.306 Fax +49.351.8822.337 European Technical Support Phone +49.351.8822.7.772 Fax +49.351.8822.87.772

.com

Phone +886.2.2377.8189 Fax +886.2.2377.8199 Rev. 1.10 09/2015