MK5/6 Installation Guide
Please download the latest copy of this document from www.p3cars.com/install
WARRANTY & LIABILITY: Neither P3 Cars, nor its dealers or agents shall be liable in any way, for any damage, loss, injury or other claims, resulting from the installation or use of this product. By purchasing or installing this product, you assume all liability of any kind connected with the use and/or application of this product. If you are unsure that you can safely install and use this product, consult a qualified installer or mechanic. The warranty on this product covers only the product itself for a period of 6 months from the date of purchase, and it will be at our discretion to repair or replace the affected parts. No user serviceable parts inside. Warranty will be voided if product shows physical damage.
1
Open the driver’s side door and remove the cover to the fuse box.
2
3
Thread gauge connection cable through the vent opening and out the fuse box.
4
5
Push on the bottom corners of the vent to firmly secure into place.
6
Use your fingers to push out the lower left corner of the vent and insert a screw driver to pop out from the bottom up.
Pull the entire cable through the fuse box and snap the new vent into place starting at the top.
Connect the cable to the control unit.
Please download the latest copy of this document from www.p3cars.com/install
7
Tuck the control unit and the remaining cable into the fuse box. Make sure the cable that will be plugged in into the diagnostic port is tucked into the crease at the bottom of the fuse box.
WARRANTY & LIABILITY: Neither P3 Cars, nor its dealers or agents shall be liable in any way, for any damage, loss, injury or other claims, resulting from the installation or use of this product. By purchasing or installing this product, you assume all liability of any kind connected with the use and/or application of this product. If you are unsure that you can safely install and use this product, consult a qualified installer or mechanic. The warranty on this product covers only the product itself for a period of 6 months from the date of purchase, and it will be at our discretion to repair or replace the affected parts. No user serviceable parts inside. Warranty will be voided if product shows physical damage.
8
Snap the fuse box cover back on. Don’t forget to remove the protective plastic sheet from the glass face of the gauge.
9
Plug the connector firmly into your cars diagnostic port. Tuck any visible cord into the creases.
10
Installation complete! Please refer to the gauge usage and configuration guide for an explanation of features. If you have additional questions, email us at support@p3cars.com