Marker 1516

Page 1

PROGRAM

B I N D I N G S 2015 - 2016

RULE

THE

M O U N TAIN


2

B I N D I N G S 2 0 1 5 -16

3

R U L E T H E M O U N TA I N

MARKER - KINGPIN

6 0

Y E A R S

O F

E X P E R I E N C E

T H E N E W P OW E R I N TO U R I N G 2015 - 2016

Quantum leap, or quantum swing? We‘re proud to present the Marker KINGPIN for the upcoming 15/16 season. THE highperformance Pintech touring binding with TÜV certification. It brings to the table levels of power transfer never before seen in this binding category, with impressive performance on both ascent and descent as well as trailblazing new safety standards.

IMPRINT INTERNATIONAL HEADQUARTER Marker Deutschland GmbH Dr. Gotthilf-Näher-Strasse 6 82377 Penzberg Germany Ph: +49 (0) 8856 8000-0 Fax: +49 (0) 8856 8000-271 info@marker.de

Photography: Adam Clark, Scott Makewitz, Peter Mathis, GEPA, Michael Mayer, Pally Learmond, Erlend Haugen, Dan Milner, Martin Bolle, Dan Brown, Mirja Geh, Alx O`Brien Created & produced by: yearning.de Marker, Xcell, Piston Control, Glide, Fastrak, EPS, Duke, Jester, Baron, Griffon, Squire, Schizo, Ampire, Lord, i-Roc and Biotech are registered Marker trademarks and other marks are pending. Subject to alteration.

FOLLOW US youtube.com/markerbindings facebook.com/markerskibindings twitter.com/markerbindings www.marker.net #markerbindings #markerkingpin

The Marker team‘s motto has long been: When we take on a new project, we do it right. Touring in particular is an area that demands greater versatility, handling and performance than other areas of skiing. While we know exactly who is interested in these bindings, it‘s almost impossible to say just what they‘ll be doing with them on any given day. The Marker PinTech binding is the bridge between ultralight climbing and performance-

oriented alpine bindings. Hundreds of test tours went into confirming that our engineers and team had once again set the bar incredibly high — and still cleared it. Be on hand this winter as a new age dawns in the world of PinTech bindings!


2

B I N D I N G S 2 0 1 5 -16

3

R U L E T H E M O U N TA I N

MARKER - KINGPIN

6 0

Y E A R S

O F

E X P E R I E N C E

T H E N E W P OW E R I N TO U R I N G 2015 - 2016

Quantum leap, or quantum swing? We‘re proud to present the Marker KINGPIN for the upcoming 15/16 season. THE highperformance Pintech touring binding with TÜV certification. It brings to the table levels of power transfer never before seen in this binding category, with impressive performance on both ascent and descent as well as trailblazing new safety standards.

IMPRINT INTERNATIONAL HEADQUARTER Marker Deutschland GmbH Dr. Gotthilf-Näher-Strasse 6 82377 Penzberg Germany Ph: +49 (0) 8856 8000-0 Fax: +49 (0) 8856 8000-271 info@marker.de

Photography: Adam Clark, Scott Makewitz, Peter Mathis, GEPA, Michael Mayer, Pally Learmond, Erlend Haugen, Dan Milner, Martin Bolle, Dan Brown, Mirja Geh, Alx O`Brien Created & produced by: yearning.de Marker, Xcell, Piston Control, Glide, Fastrak, EPS, Duke, Jester, Baron, Griffon, Squire, Schizo, Ampire, Lord, i-Roc and Biotech are registered Marker trademarks and other marks are pending. Subject to alteration.

FOLLOW US youtube.com/markerbindings facebook.com/markerskibindings twitter.com/markerbindings www.marker.net #markerbindings #markerkingpin

The Marker team‘s motto has long been: When we take on a new project, we do it right. Touring in particular is an area that demands greater versatility, handling and performance than other areas of skiing. While we know exactly who is interested in these bindings, it‘s almost impossible to say just what they‘ll be doing with them on any given day. The Marker PinTech binding is the bridge between ultralight climbing and performance-

oriented alpine bindings. Hundreds of test tours went into confirming that our engineers and team had once again set the bar incredibly high — and still cleared it. Be on hand this winter as a new age dawns in the world of PinTech bindings!


B I N D I N G S 2 0 1 5 -16

4

5

TECHNOLOGY

TECHNOLOGY

TOE

HEEL

R U L E T H E M O U N TA I N

AFD STAINLESS STEEL

All MARKER bindings are equipped with a moveable AFD (anti friction device) leading to a highly precise release almost entirely unhindered by dirt, snow and ice! Individual adjustment of the AFD to the area of application ensures perfect functionality - from racing, for children’s bindings or on ski tours.

BIOTECH

During a backward twisting fall both horizontal and vertical forces are triggered on the toe of the binding. Biotech recognises this unfavourable force combination and reliably reduces the release force.

TWIN CAM X HEEL

The next logical step in the improvement of our Twin Cam heel, with more power, higher elasticity in the release and an optimized performance curve. The new construction increases the boot and ski connectivity for a longer period, even in extremely steep terrain, ensuring precise ski guidance until released. It also offers improved power transfer through the wider connection of the heel rail (NEW: 43 mm). The TC heel’s familiar effective step-in behavior has also been further improved. INTER PIVOT HEEL

The stunning heel construction delivers superior holding power for free riding, featuring DIN/ISO 6- 16. The Inter Pivot Heel directs the power forces in the angle of elasticity improving the holding power and reducing pre-releases. TRIPLE PIVOT ELITE TOE

The toe construction with DIN/ISO up to 18 allows for impressive retention when freeriding. The spring in the toe is inserted horizontally and with a sole plate inclined by 5° it provides the highest energy absorption so as to reduce the risk of early release. The large supporting surface optimizes the power transmission and allows for great stresses and strains. In relation to their weight, toes with this technology therefore achieve a never-seen-before performance.

TWIN CAM HEEL

The two-piece Twin Cam Heel is designed with a unique soft-entry feature. Step-in more quickly and easily, even in difficult snow conditions.

TRIPLE PIVOT LIGHT TOE

The newly designed, compact toe features a horizontally inserted spring. Together with the gliding plate the gliding elements integrated into the sole holders ensure a very precise release behaviour which is comparable to all other MARKER bindings. Why should touring skiers and freestylers accept any compromises? An aluminium bridge on the top provides additional support without adding any extra weight.

TRIPLE PIVOT COMFORT TOE

When designing the toe, maximum functionality and a low weight were the order of the day. This resulted in a lightweight binding system that in addition to excellent release properties also provides an individually tailored backwards release. The entire binding is completed by its unbeatable design. The horizontally inserted release spring allows for a compact design and results in a very direct ski binding for optimal power transmission.

INTELLIGENT BACKWARD RELEASE

Intelligent Backward Release clearly differentiates between forces that occur during a backward twisting fall and moments of force that originate from a movement onto the edge of the ski to enter into curves. An individually adjusted spring reliably regulates the backwards release without any loss of performance.

HOLLOW LINKAGE HEEL

The heel was also redesigned from the ground up to optimize retention for all types of alpine and touring soles. The aluminium hollow axle saves on weight and maximizes the torsional stiffness. This very robust heel construction is best suited for the most strenuous of requirements.

COMFORT HEEL

For this heel the technology of the high-end bindings was adjusted to meet the requirements of sporty skiers. The release spring is inserted into the heel housing and thus allows for a very compact design and a heel housing angle which leads to an ideal release elasticity. The hollow axle and the high quality materials ensure that the binding is lightweight and looks great.

COMPACT HEEL

A statement of efficiency - with the usual perfect MARKER release properties and the perfect mix of great design, lightness and excellent functionality. This heel technology is perfect for beginners and occasional skiers due to the release properties and is an excellent value. TLT

The next level of improvement for the tried-and-tested two linkage toe system. Light, robust, full side and rear release with improved DIN range. The release springs, triggered by the sole bracket, uses the clever TLT system to provide rear release without taking up extra space or adding extra weight.

XCELL TOE

The toe pieces with magnesium sole holders (on the Xcell 24.0, 18.0 and 16.0) stand out for the large contact area with the boot sole, top power transfer and impressive shock absorption. The unique Xcell technology makes it possible to filter out short jolts and keep the ski boot perpetually centered. The new Xcell binding also offers what’s likely the most radical design in racing and inspired by F1 design.


B I N D I N G S 2 0 1 5 -16

4

5

TECHNOLOGY

TECHNOLOGY

TOE

HEEL

R U L E T H E M O U N TA I N

AFD STAINLESS STEEL

All MARKER bindings are equipped with a moveable AFD (anti friction device) leading to a highly precise release almost entirely unhindered by dirt, snow and ice! Individual adjustment of the AFD to the area of application ensures perfect functionality - from racing, for children’s bindings or on ski tours.

BIOTECH

During a backward twisting fall both horizontal and vertical forces are triggered on the toe of the binding. Biotech recognises this unfavourable force combination and reliably reduces the release force.

TWIN CAM X HEEL

The next logical step in the improvement of our Twin Cam heel, with more power, higher elasticity in the release and an optimized performance curve. The new construction increases the boot and ski connectivity for a longer period, even in extremely steep terrain, ensuring precise ski guidance until released. It also offers improved power transfer through the wider connection of the heel rail (NEW: 43 mm). The TC heel’s familiar effective step-in behavior has also been further improved. INTER PIVOT HEEL

The stunning heel construction delivers superior holding power for free riding, featuring DIN/ISO 6- 16. The Inter Pivot Heel directs the power forces in the angle of elasticity improving the holding power and reducing pre-releases. TRIPLE PIVOT ELITE TOE

The toe construction with DIN/ISO up to 18 allows for impressive retention when freeriding. The spring in the toe is inserted horizontally and with a sole plate inclined by 5° it provides the highest energy absorption so as to reduce the risk of early release. The large supporting surface optimizes the power transmission and allows for great stresses and strains. In relation to their weight, toes with this technology therefore achieve a never-seen-before performance.

TWIN CAM HEEL

The two-piece Twin Cam Heel is designed with a unique soft-entry feature. Step-in more quickly and easily, even in difficult snow conditions.

TRIPLE PIVOT LIGHT TOE

The newly designed, compact toe features a horizontally inserted spring. Together with the gliding plate the gliding elements integrated into the sole holders ensure a very precise release behaviour which is comparable to all other MARKER bindings. Why should touring skiers and freestylers accept any compromises? An aluminium bridge on the top provides additional support without adding any extra weight.

TRIPLE PIVOT COMFORT TOE

When designing the toe, maximum functionality and a low weight were the order of the day. This resulted in a lightweight binding system that in addition to excellent release properties also provides an individually tailored backwards release. The entire binding is completed by its unbeatable design. The horizontally inserted release spring allows for a compact design and results in a very direct ski binding for optimal power transmission.

INTELLIGENT BACKWARD RELEASE

Intelligent Backward Release clearly differentiates between forces that occur during a backward twisting fall and moments of force that originate from a movement onto the edge of the ski to enter into curves. An individually adjusted spring reliably regulates the backwards release without any loss of performance.

HOLLOW LINKAGE HEEL

The heel was also redesigned from the ground up to optimize retention for all types of alpine and touring soles. The aluminium hollow axle saves on weight and maximizes the torsional stiffness. This very robust heel construction is best suited for the most strenuous of requirements.

COMFORT HEEL

For this heel the technology of the high-end bindings was adjusted to meet the requirements of sporty skiers. The release spring is inserted into the heel housing and thus allows for a very compact design and a heel housing angle which leads to an ideal release elasticity. The hollow axle and the high quality materials ensure that the binding is lightweight and looks great.

COMPACT HEEL

A statement of efficiency - with the usual perfect MARKER release properties and the perfect mix of great design, lightness and excellent functionality. This heel technology is perfect for beginners and occasional skiers due to the release properties and is an excellent value. TLT

The next level of improvement for the tried-and-tested two linkage toe system. Light, robust, full side and rear release with improved DIN range. The release springs, triggered by the sole bracket, uses the clever TLT system to provide rear release without taking up extra space or adding extra weight.

XCELL TOE

The toe pieces with magnesium sole holders (on the Xcell 24.0, 18.0 and 16.0) stand out for the large contact area with the boot sole, top power transfer and impressive shock absorption. The unique Xcell technology makes it possible to filter out short jolts and keep the ski boot perpetually centered. The new Xcell binding also offers what’s likely the most radical design in racing and inspired by F1 design.


6

B I N D I N G S 2 0 1 5 -16

7

TECHNOLOGY

PERFORMANCE SP TECHNOLOGY

New Ski Patrol binding system optimized for the greatest possible range of situations, adjustable height toe pieces on the LORD S.P. can handle all types of ski boots, including both alpine and touring models and standards. Top power transfer on any terrain, despite minimal overall height profile.

MAGNESIUM PARTS

Magnesium is THE lightest and most robust metal construction material, making it perfect for our high-end products. This makes you well equipped for a faster run and the most radical lines!

TECHNOLOGY

TOURING KINGPIN TOE

The PinTech design on the KINGPIN toe piece promotes an ergonomic rolling up the foot and the most direct possible connection to the ski. Six steel springs capture the energy optimally, up to a DIN setting of 13. Individually adjustable positioning blocks make it quick and easy to step in no matter what the conditions.

KINGPIN HEEL

PISTON CONTROL

The inner life of the World Cup Plate. A hydraulic oil piston enables sensational performance on the race track. The piston only reacts to negative ski impacts. This noticeably improves the turn initiation, increases the edge grip and allows more precisely controlled turns.

GLIDE CONTROL D-SYSTEM

MARKER brings an exceptional demo-capable binding component onto the market with the Glide Control System. Here the focus is on a low stand height, low weight and excellent performance. The innovative technology of the Glide Control Binding allows any boot (263-374 mm) to be quickly and easily adjusted via the central lever.

The revolutionary heel construction for the PinTech bindings features wide sole contact points to deliver the kind of direct, lossless power transfer more frequently seen in alpine bindings. The KINGPIN heel is also many times safer than traditional PinTech bindings.

BACKCOUNTRY TECHNOLOGY

The uphill hiking mode integrated in the Duke binding features easy adjustment from ride to hike. The hiking aid offers a 7° and 13° position. In ski mode the BCT lever is protected from unwanted releases. A 40 mm backward movement of the binding in BC mode results in a better balanced swing weight and easier kick turns.

BACKCOUNTRY COMFORT

The patented, ergonomically shaped lever under the boot allows comfortable opening and closing. The position prevents the binding from unwanted release and provides unparalleled security against an undesired “telemark“ situation. FDT

Asynchronous adjustments, ergonomic lever position, a clearly visible pressure display and perfectly legible sole length scale, enormous durability and adjustability, even with the boot in the binding — this is the demo system of the future. Optional built-in barcode for rental use.

MULTI-STANCE ADJUSTOR

Going wild in a park or in backcountry requires a different skiing technique. When doing jumps and new school tricks you need to be centered on the skis for optimum balance. In powder though, setting the binding back a little improves ski flotation tremenduosly and less force is needed. The Multi-Stance Adjustor offers 60 mm continuous travel for perfectly balanced riding position.

EPF - EXTENDED POWER FRAME

CLIMBING AID

The titanium climbing aid offers two positions with 7° and 13° which can easily be accessed with the ski pole, even in an unstable standing position. Integrated elastomer paddings dampen the impact reducing the irritating traditional “clack” and allow more comfortable hiking.

TOURING BASE PLATE

The wide frame construction is secured at several positions, perfectly distributing the pressure for unparalleled skiing performance. 2 sizes are available for optimum size range and stocking efficiency.

The power booster. The power frame delivers breath-taking performance and amazing power transfer in every condition. Recommended for skis over 88 mm. TOURING BALANCE

POWER WIDTH DESIGN

Designed with a low level stand height for maximum power transmission. It‘s the shortest frame of all hiking models in the market, yet featuring a 10 mm wider interface than traditional “racing” bindings. Connecting brackets are strategically placed in the power transfer areas for immediate edge control. Recommended for skis over 76 mm.

Switching the lever to touring mode moves the whole binding 40 mm backward, allowing a more comfortable walking position and keeping the ski optimally balanced for kick turns and steep terrain.

HOLLOW TECH

Our fibre-reinforced frame base plate provides impressive riding stability and is yet very light due to the gas injected hollow construction. TÜV

All MARKER bindings are certified by the TÜV organization.

R U L E T H E M O U N TA I N


6

B I N D I N G S 2 0 1 5 -16

7

TECHNOLOGY

PERFORMANCE SP TECHNOLOGY

New Ski Patrol binding system optimized for the greatest possible range of situations, adjustable height toe pieces on the LORD S.P. can handle all types of ski boots, including both alpine and touring models and standards. Top power transfer on any terrain, despite minimal overall height profile.

MAGNESIUM PARTS

Magnesium is THE lightest and most robust metal construction material, making it perfect for our high-end products. This makes you well equipped for a faster run and the most radical lines!

TECHNOLOGY

TOURING KINGPIN TOE

The PinTech design on the KINGPIN toe piece promotes an ergonomic rolling up the foot and the most direct possible connection to the ski. Six steel springs capture the energy optimally, up to a DIN setting of 13. Individually adjustable positioning blocks make it quick and easy to step in no matter what the conditions.

KINGPIN HEEL

PISTON CONTROL

The inner life of the World Cup Plate. A hydraulic oil piston enables sensational performance on the race track. The piston only reacts to negative ski impacts. This noticeably improves the turn initiation, increases the edge grip and allows more precisely controlled turns.

GLIDE CONTROL D-SYSTEM

MARKER brings an exceptional demo-capable binding component onto the market with the Glide Control System. Here the focus is on a low stand height, low weight and excellent performance. The innovative technology of the Glide Control Binding allows any boot (263-374 mm) to be quickly and easily adjusted via the central lever.

The revolutionary heel construction for the PinTech bindings features wide sole contact points to deliver the kind of direct, lossless power transfer more frequently seen in alpine bindings. The KINGPIN heel is also many times safer than traditional PinTech bindings.

BACKCOUNTRY TECHNOLOGY

The uphill hiking mode integrated in the Duke binding features easy adjustment from ride to hike. The hiking aid offers a 7° and 13° position. In ski mode the BCT lever is protected from unwanted releases. A 40 mm backward movement of the binding in BC mode results in a better balanced swing weight and easier kick turns.

BACKCOUNTRY COMFORT

The patented, ergonomically shaped lever under the boot allows comfortable opening and closing. The position prevents the binding from unwanted release and provides unparalleled security against an undesired “telemark“ situation. FDT

Asynchronous adjustments, ergonomic lever position, a clearly visible pressure display and perfectly legible sole length scale, enormous durability and adjustability, even with the boot in the binding — this is the demo system of the future. Optional built-in barcode for rental use.

MULTI-STANCE ADJUSTOR

Going wild in a park or in backcountry requires a different skiing technique. When doing jumps and new school tricks you need to be centered on the skis for optimum balance. In powder though, setting the binding back a little improves ski flotation tremenduosly and less force is needed. The Multi-Stance Adjustor offers 60 mm continuous travel for perfectly balanced riding position.

EPF - EXTENDED POWER FRAME

CLIMBING AID

The titanium climbing aid offers two positions with 7° and 13° which can easily be accessed with the ski pole, even in an unstable standing position. Integrated elastomer paddings dampen the impact reducing the irritating traditional “clack” and allow more comfortable hiking.

TOURING BASE PLATE

The wide frame construction is secured at several positions, perfectly distributing the pressure for unparalleled skiing performance. 2 sizes are available for optimum size range and stocking efficiency.

The power booster. The power frame delivers breath-taking performance and amazing power transfer in every condition. Recommended for skis over 88 mm. TOURING BALANCE

POWER WIDTH DESIGN

Designed with a low level stand height for maximum power transmission. It‘s the shortest frame of all hiking models in the market, yet featuring a 10 mm wider interface than traditional “racing” bindings. Connecting brackets are strategically placed in the power transfer areas for immediate edge control. Recommended for skis over 76 mm.

Switching the lever to touring mode moves the whole binding 40 mm backward, allowing a more comfortable walking position and keeping the ski optimally balanced for kick turns and steep terrain.

HOLLOW TECH

Our fibre-reinforced frame base plate provides impressive riding stability and is yet very light due to the gas injected hollow construction. TÜV

All MARKER bindings are certified by the TÜV organization.

R U L E T H E M O U N TA I N


9

B I N D I N G S 2 0 1 5 -16

R U L E T H E M O U N TA I N

KINGPIN RANGE OF USE

High Alpine Touring

High alpine touring requires mastery of extreme terrain and in many cases massive altitude changes during the ascent and descent. Descents down near-vertical faces require a skilled and confident skier and 100% reliable equipment, as any fall would be catastrophic. The KINGPIN with its high DIN range and unique power transmission is the perfect choice when maximum control of the ski is needed.

TOURING

T he n ew Powe r in Tourin g 2015 - 2016

Ski Touring

Classical ski touring is primarily focused on the longer element, the ascent. Top walking comfort, simple operation and a quick switch from walking to skiing mode make the new KINGPIN into a majestic partner. Unlike traditional PinTech bindings, classic touring skiers can now use the KINGPIN for more fun and safety on the descent, as this binding leaves nothing to be desired when it comes to power transfer and ski control.

Free Touring

For freeride tourers, the climb is more of a means to an end, with the focus put entirely on reaching insane, yet pristine slopes. The KINGPIN offers the optimal combination of minimal weight and walking comfort together with sensational performance and safety on the descent.

P ROTECTION THE PINTECH BINDING WITH DIN ISO CERTIFICATION (DIN ISO 13992:2007) Touring has seen tremendous growth in recent years, with users trying out so many different options that modern gear has been

forced to adapt to keep up. We developed the brand-new KINGPIN PinTech binding to meet these needs. For various touring

concepts, significantly greater safety and performance that meets the extreme expectations and needs of touring skiers.

P ERFORMANCE UNBEATEN POWER TRANSMISSION C OMFORT/HANDLING UNIQUE COMFORT & EASY HANDLING

K E Y FE AT UR ES

 R adical new heel piece unlike any other, delivering levels of safety previously found only in classic alpine bindings.  O ne absolutely revolutionary aspect of the PinTech binding: The XXL Power Transmitter in the heel piece and the two powerful toe pieces with six springs and the KINGPIN‘s characteristically wide bore pattern for unheard of levels of power transfer to the ski.

This binding promotes unmatched downhill performance and ski control, even in the toughest of conditions. S ensationally comfortable in walk mode, yet lightweight for less exertion on the climb. A mazingly simple to operate, from stepping in and out to switching from walk to ski mode and when using the climbing aids. This holds true even in

challenging terrain and difficult situations, providing enhanced levels of safety. M ARKER’s characteristic safety: TÜV certification based on DIN ISO 13992:2007!

Watch the video now! All features at a glance


9

B I N D I N G S 2 0 1 5 -16

R U L E T H E M O U N TA I N

KINGPIN RANGE OF USE

High Alpine Touring

High alpine touring requires mastery of extreme terrain and in many cases massive altitude changes during the ascent and descent. Descents down near-vertical faces require a skilled and confident skier and 100% reliable equipment, as any fall would be catastrophic. The KINGPIN with its high DIN range and unique power transmission is the perfect choice when maximum control of the ski is needed.

TOURING

T he n ew Powe r in Tourin g 2015 - 2016

Ski Touring

Classical ski touring is primarily focused on the longer element, the ascent. Top walking comfort, simple operation and a quick switch from walking to skiing mode make the new KINGPIN into a majestic partner. Unlike traditional PinTech bindings, classic touring skiers can now use the KINGPIN for more fun and safety on the descent, as this binding leaves nothing to be desired when it comes to power transfer and ski control.

Free Touring

For freeride tourers, the climb is more of a means to an end, with the focus put entirely on reaching insane, yet pristine slopes. The KINGPIN offers the optimal combination of minimal weight and walking comfort together with sensational performance and safety on the descent.

P ROTECTION THE PINTECH BINDING WITH DIN ISO CERTIFICATION (DIN ISO 13992:2007) Touring has seen tremendous growth in recent years, with users trying out so many different options that modern gear has been

forced to adapt to keep up. We developed the brand-new KINGPIN PinTech binding to meet these needs. For various touring

concepts, significantly greater safety and performance that meets the extreme expectations and needs of touring skiers.

P ERFORMANCE UNBEATEN POWER TRANSMISSION C OMFORT/HANDLING UNIQUE COMFORT & EASY HANDLING

K E Y FE AT UR ES

 R adical new heel piece unlike any other, delivering levels of safety previously found only in classic alpine bindings.  O ne absolutely revolutionary aspect of the PinTech binding: The XXL Power Transmitter in the heel piece and the two powerful toe pieces with six springs and the KINGPIN‘s characteristically wide bore pattern for unheard of levels of power transfer to the ski.

This binding promotes unmatched downhill performance and ski control, even in the toughest of conditions. S ensationally comfortable in walk mode, yet lightweight for less exertion on the climb. A mazingly simple to operate, from stepping in and out to switching from walk to ski mode and when using the climbing aids. This holds true even in

challenging terrain and difficult situations, providing enhanced levels of safety. M ARKER’s characteristic safety: TÜV certification based on DIN ISO 13992:2007!

Watch the video now! All features at a glance


10

B I N D I N G S 2 0 1 5 -16

11

KING PIN 10

RANGE OF USE

FEATURES

PERFORMANCE

XXL Power Transmitter

Sixpack Power Springs

Broad drill pattern

·T he heel construction is a revolution in the PinTech field · For the greatest and directest power transfer to the ski · Contacts points placed far apart from each other, with the heel of the boot broadly affixed to the outermost edge.

· Six springs made of high-quality steel (instead of the traditional four) · Powerful grip on the boot · Greater energy capture – even more power in the 13 version

·O ptimal power leverage through the wide placing of the mounting screws (38 mm)

R U L E T H E M O U N TA I N

NEW

The new protection and performance standard for PinTech bindings. Key features in short: Tremendous walking and step-in comfort, very simple step-in with individually adjustable stop points, wide drill pattern, 6-pack Power Springs on front and XXL Power Transmitter for impressive power transfer, climbing aids from 0° to 13°, carbon links and unparalleled levels of safety for this area thanks to the DIN/ISO certified KINGPIN heel.

DIN RANGE REC SKIERS WEIGHT STAND HEIGHT TOE W.O SKI TOE SYSTEM STEP-IN HEEL COLOR COMBINATION WEIGHT* W/O / WITH BRAKE

5.0 - 10.0 50 - 110 kg 21 mm KINGPIN PinTech toe KINGPIN heel black - gold 650 g / 730g 7733P1MA (75-100mm) 7733P1MB (100-125mm)

ART. NO.

KING PIN 1 3

RANGE OF USE

NEW

All features identical to the KINGPIN 10, except with a DIN range of 6.0 to 13.0 for heavier and more athletic skiers.

PROTECTION

HANDLING & COMFORT

Protection

Compatible

·T he KINGPIN was the first PinTech with TÜV certification based on the current standard for ski touring bindings, DIN ISO 13992:2007.

· Compatible with all touring ski boots featuring PinTech inserts and fulfilling DIN ISO standard 9465.

Walk/Ski Modes ·O ne step is all that‘s needed to go from walk to ski mode · The skier doesn‘t need to release from the binding to switch between modes. This is helpful for example in deep snow and short descents using skins.

Climbing aids (0°, 7° and 13° sole length 310 mm) ·C an be used regardless of basket on pole · O ptimal accessibility (sits on top of the heel piece) · Very easy to activate or deactivate

FEATURES

ART. NO

· Locks automatically in walking mode · Available immediately when binding switched to ski mode · Brake features a highly pronounced lateral profile· Can be replaced quickly and easily

Pre-installed crampon bracket ·W eight: 95 g @ 105 mm · Available crampons: 90, 105, 120 mm

6.0 - 13.0 < 120 21 mm KINGPIN PinTech toe KINGPIN heel black - gold 650 g / 730g 7933P1MA (75-100mm) 7933P1MB (100-125mm)

Adjustable Easy Step In ·T remendously simple step-in thanks to stop points · I ndividually adjustable stop points position boot properly · Works with all boot models

KING PIN 10 DEMO

RANGE OF USE

NEW

World-class PinTech performance and safety is now available in the rental business as well. All of the KINGPIN 10 features described above, on a simple, quick-adjust demo system — truly a new era for touring rentals.

FEATURES

Brake

DIN RANGE REC SKIERS WEIGHT STAND HEIGHT TOE W.O SKI TOE SYSTEM STEP-IN HEEL COLOR COMBINATION WEIGHT* W/O / WITH BRAKE

DIN RANGE REC SKIERS WEIGHT STAND HEIGHT TOE W.O SKI TOE SYSTEM STEP-IN HEEL COLOR COMBINATION WEIGHT* WITH BRAKE ART. NO

5.0 - 10.0 50 - 110 kg 28 mm KINGPIN PinTech toe KINGPIN heel black - gold 910 g 7734P1MA (75-100mm) 7734P1MB (100-125mm)


10

B I N D I N G S 2 0 1 5 -16

11

KING PIN 10

RANGE OF USE

FEATURES

PERFORMANCE

XXL Power Transmitter

Sixpack Power Springs

Broad drill pattern

·T he heel construction is a revolution in the PinTech field · For the greatest and directest power transfer to the ski · Contacts points placed far apart from each other, with the heel of the boot broadly affixed to the outermost edge.

· Six springs made of high-quality steel (instead of the traditional four) · Powerful grip on the boot · Greater energy capture – even more power in the 13 version

·O ptimal power leverage through the wide placing of the mounting screws (38 mm)

R U L E T H E M O U N TA I N

NEW

The new protection and performance standard for PinTech bindings. Key features in short: Tremendous walking and step-in comfort, very simple step-in with individually adjustable stop points, wide drill pattern, 6-pack Power Springs on front and XXL Power Transmitter for impressive power transfer, climbing aids from 0° to 13°, carbon links and unparalleled levels of safety for this area thanks to the DIN/ISO certified KINGPIN heel.

DIN RANGE REC SKIERS WEIGHT STAND HEIGHT TOE W.O SKI TOE SYSTEM STEP-IN HEEL COLOR COMBINATION WEIGHT* W/O / WITH BRAKE

5.0 - 10.0 50 - 110 kg 21 mm KINGPIN PinTech toe KINGPIN heel black - gold 650 g / 730g 7733P1MA (75-100mm) 7733P1MB (100-125mm)

ART. NO.

KING PIN 1 3

RANGE OF USE

NEW

All features identical to the KINGPIN 10, except with a DIN range of 6.0 to 13.0 for heavier and more athletic skiers.

PROTECTION

HANDLING & COMFORT

Protection

Compatible

·T he KINGPIN was the first PinTech with TÜV certification based on the current standard for ski touring bindings, DIN ISO 13992:2007.

· Compatible with all touring ski boots featuring PinTech inserts and fulfilling DIN ISO standard 9465.

Walk/Ski Modes ·O ne step is all that‘s needed to go from walk to ski mode · The skier doesn‘t need to release from the binding to switch between modes. This is helpful for example in deep snow and short descents using skins.

Climbing aids (0°, 7° and 13° sole length 310 mm) ·C an be used regardless of basket on pole · O ptimal accessibility (sits on top of the heel piece) · Very easy to activate or deactivate

FEATURES

ART. NO

· Locks automatically in walking mode · Available immediately when binding switched to ski mode · Brake features a highly pronounced lateral profile· Can be replaced quickly and easily

Pre-installed crampon bracket ·W eight: 95 g @ 105 mm · Available crampons: 90, 105, 120 mm

6.0 - 13.0 < 120 21 mm KINGPIN PinTech toe KINGPIN heel black - gold 650 g / 730g 7933P1MA (75-100mm) 7933P1MB (100-125mm)

Adjustable Easy Step In ·T remendously simple step-in thanks to stop points · I ndividually adjustable stop points position boot properly · Works with all boot models

KING PIN 10 DEMO

RANGE OF USE

NEW

World-class PinTech performance and safety is now available in the rental business as well. All of the KINGPIN 10 features described above, on a simple, quick-adjust demo system — truly a new era for touring rentals.

FEATURES

Brake

DIN RANGE REC SKIERS WEIGHT STAND HEIGHT TOE W.O SKI TOE SYSTEM STEP-IN HEEL COLOR COMBINATION WEIGHT* W/O / WITH BRAKE

DIN RANGE REC SKIERS WEIGHT STAND HEIGHT TOE W.O SKI TOE SYSTEM STEP-IN HEEL COLOR COMBINATION WEIGHT* WITH BRAKE ART. NO

5.0 - 10.0 50 - 110 kg 28 mm KINGPIN PinTech toe KINGPIN heel black - gold 910 g 7734P1MA (75-100mm) 7734P1MB (100-125mm)


12

B I N D I N G S 2 0 1 5 -16

13

R U L E T H E M O U N TA I N

TECHNOLOGY

TOURING 2015 - 2016

Touring bindings have to be as light as possible to make the ascent more comfortable. They also have to be as durable as possible to live up to

modern performance expectations - top skiing performance in any situation. We make the impossible possible.

UPHILL FEATURES

TOUR F1 2 EPF

RANGE OF USE

COMFORTABLE BALANCE

CLIMBING AID

Switching the lever to touring mode moves the whole binding 40 mm backward, allowing a more comfortable walking position and keeping the ski optimally balanced for kick turns and steep terrain.

The titanium climbing aid offers two positions with 7° and 13° which can easily be accessed with the ski pole.

PIVOT PLATE

CRAMPON

Bearing bushings ensure smooth operation and eliminates fore/aft play. A hollow stainless steel pivot provides higher stability without adding weight.

Tailor-made and super light anodized aluminium crampon for the F10 and F12 bindings are available in 74, 84, 106 and 120 mm widths. The mounting position is right under the arch in order to provide maximum pressure and do ease hiking.

FEATURES

AFD SYSTEM

EPF TECHNOLOGY (TOUR F12 EPF)

BEST PERFORMANCE

The new frame allows a significant enlargement of the screw pattern. Compared to the previous model the screws are placed 28% further towards the outside. Therefore the momentum transfer is much closer to the edges, placed exactly where the power is needed. As a result, the performance of wider skis is remarkably improved.

DIN RANGE RECOM. SKIER’S WEIGHT STAND HEIGHT W/O SKI TOE SYSTEM AFD GLIDING PLATE STEP-IN HEEL COLOR COMBINATIONS WEIGHT (PAIR)*

4.0 - 12.0 < 120 kg 36 mm Triple Pivot light stainless steel, height adjustable Hollow Linkage black - anthracite - glow yellow 1075 g (S), 1090 g (L)

ART. NO

7816P1SE (S), 7816P1LE (L)

TOUR F1 2

RANGE OF USE

A rubber sleeve around the AFD screw eliminates eventual sticking of snow or ice. An additional Teflon® coating at the the bottom further reduces ice adhesion.

DOWNHILL FEATURES

FREERIDE TOUR

Decked out in a new color for the coming season, the F12 EPF boasts not just the familiar tour features, but also tremendous power transfer thanks to the wide EPF frames — necessary for taming the widest touring skis when the terrain gets rough and sloppy. It also makes it easier to initiate turns in any snow conditions.

CLASSIC TOUR

The heavy-duty touring binding, technically similar to the F10 but with more brawn. Roughly 60 grams heavier than its lighter sibling the higher DIN range calls for fast turns and steep runs and those who need that bit of extra power for tougher terrain.

FEATURES

HOLLOW LINKAGE HEEL

A subtle material increase provides higher stabilty. Teflon® gliding shoes reduce wear and further improve power transmission.

Improved heel kinematics enable a smoother stepping in.

TOURING BASE PLATE

CARBON PLATE

Made with polyamide, making it even stiffer and more robust than before. The modified profile makes changing to ski mode easier and improves handling in snowy or icy conditions.

25% more robust due to increased dimensions.

4.0 - 12.0 < 120 kg 36 mm Triple Pivot light height adjustable Hollow Linkage black - red - white 1020 g (S), 1040 g (L)

ART. NO

7816M1TA (S), 7816M1TB (L)

TOUR F10

RANGE OF USE

TRIPLE PIVOT LIGHT TOE

DIN RANGE RECOM. SKIER’S WEIGHT STAND HEIGHT W/O SKI TOE SYSTEM AFD GLIDING PLATE STEP-IN HEEL COLOR COMBINATIONS WEIGHT (PAIR)*

CLASSIC TOUR

The perfect choice for the touring skier who doesn‘t accept any compromise when it comes to weight, handling and reliability. Designed for the skier looking forward to the descent as much as the ascent and a general focus on light weight.

FEATURES

DIN RANGE RECOM. SKIER’S WEIGHT STAND HEIGHT W/O SKI TOE SYSTEM AFD GLIDING PLATE STEP-IN HEEL COLOR COMBINATIONS WEIGHT (PAIR)*

3.0 - 10.0 30-110 kg 36 mm Triple Pivot light height adjustable Hollow Linkage black - white - red 980 g (S), 999 g (L)

ART. NO

7716M1TC (S), 7716M1TD (L)

* with brakes and screws


12

B I N D I N G S 2 0 1 5 -16

13

R U L E T H E M O U N TA I N

TECHNOLOGY

TOURING 2015 - 2016

Touring bindings have to be as light as possible to make the ascent more comfortable. They also have to be as durable as possible to live up to

modern performance expectations - top skiing performance in any situation. We make the impossible possible.

UPHILL FEATURES

TOUR F1 2 EPF

RANGE OF USE

COMFORTABLE BALANCE

CLIMBING AID

Switching the lever to touring mode moves the whole binding 40 mm backward, allowing a more comfortable walking position and keeping the ski optimally balanced for kick turns and steep terrain.

The titanium climbing aid offers two positions with 7° and 13° which can easily be accessed with the ski pole.

PIVOT PLATE

CRAMPON

Bearing bushings ensure smooth operation and eliminates fore/aft play. A hollow stainless steel pivot provides higher stability without adding weight.

Tailor-made and super light anodized aluminium crampon for the F10 and F12 bindings are available in 74, 84, 106 and 120 mm widths. The mounting position is right under the arch in order to provide maximum pressure and do ease hiking.

FEATURES

AFD SYSTEM

EPF TECHNOLOGY (TOUR F12 EPF)

BEST PERFORMANCE

The new frame allows a significant enlargement of the screw pattern. Compared to the previous model the screws are placed 28% further towards the outside. Therefore the momentum transfer is much closer to the edges, placed exactly where the power is needed. As a result, the performance of wider skis is remarkably improved.

DIN RANGE RECOM. SKIER’S WEIGHT STAND HEIGHT W/O SKI TOE SYSTEM AFD GLIDING PLATE STEP-IN HEEL COLOR COMBINATIONS WEIGHT (PAIR)*

4.0 - 12.0 < 120 kg 36 mm Triple Pivot light stainless steel, height adjustable Hollow Linkage black - anthracite - glow yellow 1075 g (S), 1090 g (L)

ART. NO

7816P1SE (S), 7816P1LE (L)

TOUR F1 2

RANGE OF USE

A rubber sleeve around the AFD screw eliminates eventual sticking of snow or ice. An additional Teflon® coating at the the bottom further reduces ice adhesion.

DOWNHILL FEATURES

FREERIDE TOUR

Decked out in a new color for the coming season, the F12 EPF boasts not just the familiar tour features, but also tremendous power transfer thanks to the wide EPF frames — necessary for taming the widest touring skis when the terrain gets rough and sloppy. It also makes it easier to initiate turns in any snow conditions.

CLASSIC TOUR

The heavy-duty touring binding, technically similar to the F10 but with more brawn. Roughly 60 grams heavier than its lighter sibling the higher DIN range calls for fast turns and steep runs and those who need that bit of extra power for tougher terrain.

FEATURES

HOLLOW LINKAGE HEEL

A subtle material increase provides higher stabilty. Teflon® gliding shoes reduce wear and further improve power transmission.

Improved heel kinematics enable a smoother stepping in.

TOURING BASE PLATE

CARBON PLATE

Made with polyamide, making it even stiffer and more robust than before. The modified profile makes changing to ski mode easier and improves handling in snowy or icy conditions.

25% more robust due to increased dimensions.

4.0 - 12.0 < 120 kg 36 mm Triple Pivot light height adjustable Hollow Linkage black - red - white 1020 g (S), 1040 g (L)

ART. NO

7816M1TA (S), 7816M1TB (L)

TOUR F10

RANGE OF USE

TRIPLE PIVOT LIGHT TOE

DIN RANGE RECOM. SKIER’S WEIGHT STAND HEIGHT W/O SKI TOE SYSTEM AFD GLIDING PLATE STEP-IN HEEL COLOR COMBINATIONS WEIGHT (PAIR)*

CLASSIC TOUR

The perfect choice for the touring skier who doesn‘t accept any compromise when it comes to weight, handling and reliability. Designed for the skier looking forward to the descent as much as the ascent and a general focus on light weight.

FEATURES

DIN RANGE RECOM. SKIER’S WEIGHT STAND HEIGHT W/O SKI TOE SYSTEM AFD GLIDING PLATE STEP-IN HEEL COLOR COMBINATIONS WEIGHT (PAIR)*

3.0 - 10.0 30-110 kg 36 mm Triple Pivot light height adjustable Hollow Linkage black - white - red 980 g (S), 999 g (L)

ART. NO

7716M1TC (S), 7716M1TD (L)

* with brakes and screws


B I N D I N G S 2 0 1 5 -16

14

15

TECHNOLOGY

RACING

R U L E T H E M O U N TA I N

CO M P E T I T I O N 2015 - 2016

2015 - 2016

R ACE XCELL TOE > Incredible power transmission > Increased retention > Greater precision and control > Boot stays centered / Increased retention > Xcell Piston absorbs short, initial impacts > Better protection

XCELL 24.0

RANGE OF USE

NEW

The new Xcell construction turned heads last year, especially in the youth racing community. The power packet is now finally available up to DIN setting 24, and replaces the old Comp series. This is racing power at its most pure...

The revolutionary Xcell technology in the toe pieces holds the boot perfectly centered and absorbs even the hardest jolts to the ski. Taken altogether, this translates into fantastic control of the ski. The racing bindings from

MARKER feature premium quality magnesium components (Xcell 24.0, 18.0, 16.0), a broader sole contact surface and the innovative, x-shaped damping mechanism in the toe pieces to deliver uncompromising world-class

racing performance on all courses. The Xcell system is complemented by the new Race Xcell heel, which provides similar world-class power transfer and elasticity in the release. FEATURES

12.0 - 24.0 60 + kg 18 mm Xcell toe stainless steel Twin Cam X white - black - glow red 2356 g

ART. NO

7130P1WC

XCELL 18.0

RANGE OF USE

NEW

The first choice for lighter skiers and athletic women who need to slice off every fraction of a second. All features are exactly identical to the Xcell 24.0, except with a DIN range of 8.0 to 18.0.

R ACE XCELL HEEL > INCREASED VERTICAL ENERGY ABSORPTION > 16MM ELASTIC TRAVEL > INCREASED BOOT LUG PURCHASE

DIN RANGE RECOM. SKIER’S WEIGHT STAND HEIGHT W/O SKI TOE SYSTEM AFD GLIDING PLATE STEP-IN HEEL COLOR COMBINATIONS WEIGHT (PAIR)

35 mm 43 mm

> WIDER CONTACT POINTS > WIDER HEEL CONNECTION > GREATER POWER TRANSMISSION

Comp 12 Race Xcell 12

FEATURES

DIN RANGE RECOM. SKIER’S WEIGHT STAND HEIGHT W/O SKI TOE SYSTEM AFD GLIDING PLATE STEP-IN HEEL COLOR COMBINATIONS WEIGHT (PAIR) ART. NO

8.0 - 18.0 60 + kg 18 mm Xcell toe stainless steel Twin Cam X white - black - glow red 2294 g 7120P1WM


B I N D I N G S 2 0 1 5 -16

14

15

TECHNOLOGY

RACING

R U L E T H E M O U N TA I N

CO M P E T I T I O N 2015 - 2016

2015 - 2016

R ACE XCELL TOE > Incredible power transmission > Increased retention > Greater precision and control > Boot stays centered / Increased retention > Xcell Piston absorbs short, initial impacts > Better protection

XCELL 24.0

RANGE OF USE

NEW

The new Xcell construction turned heads last year, especially in the youth racing community. The power packet is now finally available up to DIN setting 24, and replaces the old Comp series. This is racing power at its most pure...

The revolutionary Xcell technology in the toe pieces holds the boot perfectly centered and absorbs even the hardest jolts to the ski. Taken altogether, this translates into fantastic control of the ski. The racing bindings from

MARKER feature premium quality magnesium components (Xcell 24.0, 18.0, 16.0), a broader sole contact surface and the innovative, x-shaped damping mechanism in the toe pieces to deliver uncompromising world-class

racing performance on all courses. The Xcell system is complemented by the new Race Xcell heel, which provides similar world-class power transfer and elasticity in the release. FEATURES

12.0 - 24.0 60 + kg 18 mm Xcell toe stainless steel Twin Cam X white - black - glow red 2356 g

ART. NO

7130P1WC

XCELL 18.0

RANGE OF USE

NEW

The first choice for lighter skiers and athletic women who need to slice off every fraction of a second. All features are exactly identical to the Xcell 24.0, except with a DIN range of 8.0 to 18.0.

R ACE XCELL HEEL > INCREASED VERTICAL ENERGY ABSORPTION > 16MM ELASTIC TRAVEL > INCREASED BOOT LUG PURCHASE

DIN RANGE RECOM. SKIER’S WEIGHT STAND HEIGHT W/O SKI TOE SYSTEM AFD GLIDING PLATE STEP-IN HEEL COLOR COMBINATIONS WEIGHT (PAIR)

35 mm 43 mm

> WIDER CONTACT POINTS > WIDER HEEL CONNECTION > GREATER POWER TRANSMISSION

Comp 12 Race Xcell 12

FEATURES

DIN RANGE RECOM. SKIER’S WEIGHT STAND HEIGHT W/O SKI TOE SYSTEM AFD GLIDING PLATE STEP-IN HEEL COLOR COMBINATIONS WEIGHT (PAIR) ART. NO

8.0 - 18.0 60 + kg 18 mm Xcell toe stainless steel Twin Cam X white - black - glow red 2294 g 7120P1WM


16

B I N D I N G S 2 0 1 5 -16

R U L E T H E M O U N TA I N

XCELL 16 .0

RANGE OF USE

JUNIOR

R AC I N G

The racing machine from MARKER with DIN settings up to 16. The incredible absorption properties and large contact surface to the ski boot make it almost unbeatable on rock-hard race courses, without compromising on protection. The magnesium parts in the Xcell heel housing, Xcell toe piece and the Xcell heel feature a radical design and a Formula 1 look. A must-have for ambitious racers.

FEATURES

DIN RANGE RECOM. SKIER’S WEIGHT STAND HEIGHT W/O SKI TOE SYSTEM AFD GLIDING PLATE STEP-IN HEEL COLOR COMBINATIONS WEIGHT (PAIR)

6.0 - 16.0 60 + kg 18 mm Xcell toe stainless steel Twin Cam X white - black - teal 2356 g

ART. NO

6920O1WA

XCELL 1 2.0

RANGE OF USE

FEATURES

2015 - 2016

R ACE 10 TCX

RANGE OF USE

The design is identical to that of the Xcell 16.0, but with DIN settings tailored to young racers and with lighter weight resin sole holders.

The new benchmark in the world of youth racing. The same heel technology is used here as in the Xcell bindings, adjusted to the weight and skiing performance of youths, combined with the tried-and-tested TLT toe pieces. Top skiing performance with optimal power transfer.

DIN RANGE RECOM. SKIER’S WEIGHT STAND HEIGHT W/O SKI TOE SYSTEM AFD GLIDING PLATE STEP-IN HEEL COLOR COMBINATIONS WEIGHT (PAIR) ART. NO

DIN RANGE RECOM. SKIER’S WEIGHT STAND HEIGHT W/O SKI TOE SYSTEM AFD GLIDING PLATE STEP-IN HEEL COLOR COMBINATIONS WEIGHT (PAIR)

3.0 - 10.0 30 - 105 kg 18 mm 2linkage stainless steel Twin Cam X white - black - teal 2294 g

ART. NO

6520P1WX

4.0 - 12.0 < 120 kg 18 mm Xcell toe stainless steel Twin Cam X white - black - teal 2294 g 6820O1WA

WC P C INTERFACE

FEATURES

R ACE 10

RANGE OF USE

High-speed racing like the pros. Thanks to Piston Control, an integrated hydraulic oil piston, even the smallest bit of energy is converted into speed. Now compatible with the new Xcell bindings.

STAND HEIGHT TOE SYSTEM /HEEL

12 mm / 10 mm

WORLD CUP PC INTERFACE 14 MM

HEIGHT FRONT / REAR WIDTH / LENGTH SOLE LENGTH ART. NO. WC PC Interface 10 mm WC PC Interface 14 mm

NEW

The M 10.0 Comp EPS has what racing kids need: the right ingredients to climb the ladder in Marker racing competitions. Works especially well with the Jr Race interface.

WORLD CUP PC INTERFACE 10 MM

FEATURES

NEW

16 mm / 14 mm 59 / 542 mm 260 - 362 mm

FEATURES

2020N1MW 2022N1WS

DIN RANGE RECOM. SKIER’S WEIGHT STAND HEIGHT W/O SKI TOE SYSTEM AFD GLIDING PLATE STEP-IN HEEL COLOR COMBINATIONS WEIGHT (PAIR) ART. NO

3.0 - 10.0 30 - 105 kg 19 mm 2linkage stainless steel Compact white - black - teal 2294 g 6520P1WA

R ACE JUNIOR 8

RANGE OF USE

NEW

The Junior Race model with a DIN setting of 8, for kid‘s boots only. Optimal for lightweight skiers who know how to set a good, hard edge. With TLT toe pieces and Compact Heel automated mechanism. For junior soles only!!

FEATURES

DIN RANGE RECOM. SKIER’S WEIGHT STAND HEIGHT W/O SKI TOE SYSTEM AFD GLIDING PLATE STEP-IN HEEL COLOR COMBINATIONS WEIGHT (PAIR) ART. NO

2.0 - 8.0 25 - 100 kg 19 mm 2linkage stainless steel Compact white - black - teal 2294 g 6320P1WA


16

B I N D I N G S 2 0 1 5 -16

R U L E T H E M O U N TA I N

XCELL 16 .0

RANGE OF USE

JUNIOR

R AC I N G

The racing machine from MARKER with DIN settings up to 16. The incredible absorption properties and large contact surface to the ski boot make it almost unbeatable on rock-hard race courses, without compromising on protection. The magnesium parts in the Xcell heel housing, Xcell toe piece and the Xcell heel feature a radical design and a Formula 1 look. A must-have for ambitious racers.

FEATURES

DIN RANGE RECOM. SKIER’S WEIGHT STAND HEIGHT W/O SKI TOE SYSTEM AFD GLIDING PLATE STEP-IN HEEL COLOR COMBINATIONS WEIGHT (PAIR)

6.0 - 16.0 60 + kg 18 mm Xcell toe stainless steel Twin Cam X white - black - teal 2356 g

ART. NO

6920O1WA

XCELL 1 2.0

RANGE OF USE

FEATURES

2015 - 2016

R ACE 10 TCX

RANGE OF USE

The design is identical to that of the Xcell 16.0, but with DIN settings tailored to young racers and with lighter weight resin sole holders.

The new benchmark in the world of youth racing. The same heel technology is used here as in the Xcell bindings, adjusted to the weight and skiing performance of youths, combined with the tried-and-tested TLT toe pieces. Top skiing performance with optimal power transfer.

DIN RANGE RECOM. SKIER’S WEIGHT STAND HEIGHT W/O SKI TOE SYSTEM AFD GLIDING PLATE STEP-IN HEEL COLOR COMBINATIONS WEIGHT (PAIR) ART. NO

DIN RANGE RECOM. SKIER’S WEIGHT STAND HEIGHT W/O SKI TOE SYSTEM AFD GLIDING PLATE STEP-IN HEEL COLOR COMBINATIONS WEIGHT (PAIR)

3.0 - 10.0 30 - 105 kg 18 mm 2linkage stainless steel Twin Cam X white - black - teal 2294 g

ART. NO

6520P1WX

4.0 - 12.0 < 120 kg 18 mm Xcell toe stainless steel Twin Cam X white - black - teal 2294 g 6820O1WA

WC P C INTERFACE

FEATURES

R ACE 10

RANGE OF USE

High-speed racing like the pros. Thanks to Piston Control, an integrated hydraulic oil piston, even the smallest bit of energy is converted into speed. Now compatible with the new Xcell bindings.

STAND HEIGHT TOE SYSTEM /HEEL

12 mm / 10 mm

WORLD CUP PC INTERFACE 14 MM

HEIGHT FRONT / REAR WIDTH / LENGTH SOLE LENGTH ART. NO. WC PC Interface 10 mm WC PC Interface 14 mm

NEW

The M 10.0 Comp EPS has what racing kids need: the right ingredients to climb the ladder in Marker racing competitions. Works especially well with the Jr Race interface.

WORLD CUP PC INTERFACE 10 MM

FEATURES

NEW

16 mm / 14 mm 59 / 542 mm 260 - 362 mm

FEATURES

2020N1MW 2022N1WS

DIN RANGE RECOM. SKIER’S WEIGHT STAND HEIGHT W/O SKI TOE SYSTEM AFD GLIDING PLATE STEP-IN HEEL COLOR COMBINATIONS WEIGHT (PAIR) ART. NO

3.0 - 10.0 30 - 105 kg 19 mm 2linkage stainless steel Compact white - black - teal 2294 g 6520P1WA

R ACE JUNIOR 8

RANGE OF USE

NEW

The Junior Race model with a DIN setting of 8, for kid‘s boots only. Optimal for lightweight skiers who know how to set a good, hard edge. With TLT toe pieces and Compact Heel automated mechanism. For junior soles only!!

FEATURES

DIN RANGE RECOM. SKIER’S WEIGHT STAND HEIGHT W/O SKI TOE SYSTEM AFD GLIDING PLATE STEP-IN HEEL COLOR COMBINATIONS WEIGHT (PAIR) ART. NO

2.0 - 8.0 25 - 100 kg 19 mm 2linkage stainless steel Compact white - black - teal 2294 g 6320P1WA


18

B I N D I N G S 2 0 1 5 -16

19

R U L E T H E M O U N TA I N

DUKE 16 EPF

RANGE OF USE

The freeride power packet: 28% wider than its predecessor, with toe and heel components that are specially harmonized for the EPF construction, including a compact design and greater torsional stiffness. Recommended for skis 88 mm and wider.

R OYA L FA M I LY

R I D E & H I K E 2015 - 2016

FEATURES

DIN RANGE RECOM. SKIER’S WEIGHT STAND HEIGHT W/O SKI TOE SYSTEM AFD GLIDING PLATE STEP-IN HEEL COLOR COMBINATIONS WEIGHT (PAIR)

6.0 - 16.0 60 + kg 36 mm Triple Pivot elite stainless steell, height adjustable Inter Pivot black - black 2760 g (S), 2790 g (L)

ART. NO

7616O1SA (S), 7616O1LA (L)

BARON 1 3 EPF

RANGE OF USE

UPGRADE

All the benefits of the EPF construction, now available for lighter skiers as well. The Extended Power Frame isn’t the only feature that has been adopted. The new toe and heel components are also available on the Baron EPF. The 10 mm wider drilling pattern blasts the Baron into a new stratosphere of power, with a DIN setting up 13.

FEATURES

EPF/HIKE TECHNOLOGY

EXTENDED POWER FRAME

This involves more than just expanding the base plate. The drill holes are also set 10 mm wider than on the previous model, which results in significantly more direct power transmission — a difference that can really be felt. The wider construction is also built around uniquely conceived heel and toe components — for ski models from 88 mm in width, the Extended Power Frame is a true revelation.

NEW

OLD

The enlarged proportions increase stiffness and act as a power magnifier. HIKE MECHANISM

Protection rules! The Duke EPF isn‘t designed as a touring binding. But it´s a freeride binding that provides full touring functionality, with a lever, secured under the boot. So even if you just want to hike up to the next ridge,

setting the binding into walking mode requires stepping out of it. Something you would have to do anyway if skins or a crampon are required. But then on the way down, opting for a cliff or a steep couloir you can be sure your binding cannot switch back into touring mode. No other system is more reliable and therefore we keep it that way.

DIN RANGE RECOM. SKIER’S WEIGHT STAND HEIGHT W/O SKI TOE SYSTEM AFD GLIDING PLATE STEP-IN HEEL COLOR COMBINATIONS WEIGHT (PAIR)

4.0 - 13.0 < 120 36 mm Triple Pivot elite stainless steel, height adjustable Inter-Pivot black - white - silver 2450 g (S), 2480 g (L)

ART. NO

7516P1SA (S), 7516P1LA (L)


18

B I N D I N G S 2 0 1 5 -16

19

R U L E T H E M O U N TA I N

DUKE 16 EPF

RANGE OF USE

The freeride power packet: 28% wider than its predecessor, with toe and heel components that are specially harmonized for the EPF construction, including a compact design and greater torsional stiffness. Recommended for skis 88 mm and wider.

R OYA L FA M I LY

R I D E & H I K E 2015 - 2016

FEATURES

DIN RANGE RECOM. SKIER’S WEIGHT STAND HEIGHT W/O SKI TOE SYSTEM AFD GLIDING PLATE STEP-IN HEEL COLOR COMBINATIONS WEIGHT (PAIR)

6.0 - 16.0 60 + kg 36 mm Triple Pivot elite stainless steell, height adjustable Inter Pivot black - black 2760 g (S), 2790 g (L)

ART. NO

7616O1SA (S), 7616O1LA (L)

BARON 1 3 EPF

RANGE OF USE

UPGRADE

All the benefits of the EPF construction, now available for lighter skiers as well. The Extended Power Frame isn’t the only feature that has been adopted. The new toe and heel components are also available on the Baron EPF. The 10 mm wider drilling pattern blasts the Baron into a new stratosphere of power, with a DIN setting up 13.

FEATURES

EPF/HIKE TECHNOLOGY

EXTENDED POWER FRAME

This involves more than just expanding the base plate. The drill holes are also set 10 mm wider than on the previous model, which results in significantly more direct power transmission — a difference that can really be felt. The wider construction is also built around uniquely conceived heel and toe components — for ski models from 88 mm in width, the Extended Power Frame is a true revelation.

NEW

OLD

The enlarged proportions increase stiffness and act as a power magnifier. HIKE MECHANISM

Protection rules! The Duke EPF isn‘t designed as a touring binding. But it´s a freeride binding that provides full touring functionality, with a lever, secured under the boot. So even if you just want to hike up to the next ridge,

setting the binding into walking mode requires stepping out of it. Something you would have to do anyway if skins or a crampon are required. But then on the way down, opting for a cliff or a steep couloir you can be sure your binding cannot switch back into touring mode. No other system is more reliable and therefore we keep it that way.

DIN RANGE RECOM. SKIER’S WEIGHT STAND HEIGHT W/O SKI TOE SYSTEM AFD GLIDING PLATE STEP-IN HEEL COLOR COMBINATIONS WEIGHT (PAIR)

4.0 - 13.0 < 120 36 mm Triple Pivot elite stainless steel, height adjustable Inter-Pivot black - white - silver 2450 g (S), 2480 g (L)

ART. NO

7516P1SA (S), 7516P1LA (L)


21

B I N D I N G S 2 0 1 5 -16

R U L E T H E M O U N TA I N

R OYA L FA M I LY

FREESTYLE & FREERIDE

JES TER 16

RANGE OF USE

Still the first choice in terms of delivering superior skiing performance for freestylers and freeriders. The Jester features magnesium parts, nopull-out screws and a centralized swing weight: cross-axis toe spring and compact mounting leading to a short binding, ideal for spins & twists. Recommended for skis over 76mm.

2015 - 2016

FEATURES

DIN RANGE RECOM. SKIER’S WEIGHT STAND HEIGHT W/O SKI TOE SYSTEM AFD GLIDING PLATE STEP-IN HEEL COLOR COMBINATIONS WEIGHT (PAIR) ART. NO.

RANGE OF USE

6.0 - 16.0 60 + kg 22 mm Triple Pivot elite stainless steel, height adjustable Inter-Pivot black - black 1990 g (90), 2000 g (110), 2010 g(136) 7624O1J+A/B/C

G RIFFON 1 3

RANGE OF USE

The lighter version of the Jester, providing the same features for younger and lighter riders, now with new heel and toe design. The Griffon features no-pull-out screws and a centralized swing weight: cross-axis toe spring and compact mounting lead to a short binding, ideal for spins & twists. Recommended for skis over 76 mm, available with 90, 110 and 120 mm brakes in 2 color combinations.

FEATURES

DIN RANGE RECOM. SKIER’S WEIGHT STAND HEIGHT W/O SKI TOE SYSTEM AFD GLIDING PLATE STEP-IN HEEL COLOR COMBINATIONS WEIGHT (PAIR)

4.0 - 13.0 < 120 kg 22 mm Triple Pivot elite stainless steel, height adjustable Inter-Pivot black - powder-blue - white (c1) white - black - teal (c2) 1890 g (90), 1900 g (110), 1910 g (120)

ART. NO.

7524P1G +A/B/C (c1), +D/E/F (c2)

FEATURES

SQUIRE 1 1

RANGE OF USE

Designed for all the freestyle newcomers and lighter riders. The Triple Pivot Compact Toe and Hollow Linkage Heel make the binding very light and compact as well as sturdy. The toe height is adjustable for worn-out ski boots in order to provide optimum fit. Available in 3 color combinations.

R OYA L FA M I LY

JES TER 18 PRO

UPGRADE

Loud, colorful and radical: the ultimate weapon for professional hardcore freeriders. Tried-and-tested under the hardest conditions, torsionally stiff, uncompromising and makes a real statement.

DIN RANGE RECOM. SKIER’S WEIGHT STAND HEIGHT W/O SKI TOE SYSTEM AFD GLIDING PLATE STEP-IN HEEL COLOR COMBINATIONS WEIGHT (PAIR) ART. NO

8.0 - 18.0 60 + kg 22 mm Triple Pivot elite stainless steel, height adjustable, fixed Inter-Pivot patchwork 2048 g 7924P1JT

DIN RANGE RECOM. SKIER’S WEIGHT STAND HEIGHT W/O SKI TOE SYSTEM AFD GLIDING PLATE STEP-IN HEEL COLOR COMBINATIONS FEATURES

WEIGHT (PAIR) ART. NO.

3.0 - 11.0 30 - 110 kg 22 mm Triple Pivot light stainless steel, height adjustable Hollow linkage white - black - anthracite (c1) black - blue - white (c2) white - mint - black (c3) 1530 g (90 mm) / 1540 g (110 mm) 7424O1M +A/B (c1), +C/D (c2), +E/F (c3)


21

B I N D I N G S 2 0 1 5 -16

R U L E T H E M O U N TA I N

R OYA L FA M I LY

FREESTYLE & FREERIDE

JES TER 16

RANGE OF USE

Still the first choice in terms of delivering superior skiing performance for freestylers and freeriders. The Jester features magnesium parts, nopull-out screws and a centralized swing weight: cross-axis toe spring and compact mounting leading to a short binding, ideal for spins & twists. Recommended for skis over 76mm.

2015 - 2016

FEATURES

DIN RANGE RECOM. SKIER’S WEIGHT STAND HEIGHT W/O SKI TOE SYSTEM AFD GLIDING PLATE STEP-IN HEEL COLOR COMBINATIONS WEIGHT (PAIR) ART. NO.

RANGE OF USE

6.0 - 16.0 60 + kg 22 mm Triple Pivot elite stainless steel, height adjustable Inter-Pivot black - black 1990 g (90), 2000 g (110), 2010 g(136) 7624O1J+A/B/C

G RIFFON 1 3

RANGE OF USE

The lighter version of the Jester, providing the same features for younger and lighter riders, now with new heel and toe design. The Griffon features no-pull-out screws and a centralized swing weight: cross-axis toe spring and compact mounting lead to a short binding, ideal for spins & twists. Recommended for skis over 76 mm, available with 90, 110 and 120 mm brakes in 2 color combinations.

FEATURES

DIN RANGE RECOM. SKIER’S WEIGHT STAND HEIGHT W/O SKI TOE SYSTEM AFD GLIDING PLATE STEP-IN HEEL COLOR COMBINATIONS WEIGHT (PAIR)

4.0 - 13.0 < 120 kg 22 mm Triple Pivot elite stainless steel, height adjustable Inter-Pivot black - powder-blue - white (c1) white - black - teal (c2) 1890 g (90), 1900 g (110), 1910 g (120)

ART. NO.

7524P1G +A/B/C (c1), +D/E/F (c2)

FEATURES

SQUIRE 1 1

RANGE OF USE

Designed for all the freestyle newcomers and lighter riders. The Triple Pivot Compact Toe and Hollow Linkage Heel make the binding very light and compact as well as sturdy. The toe height is adjustable for worn-out ski boots in order to provide optimum fit. Available in 3 color combinations.

R OYA L FA M I LY

JES TER 18 PRO

UPGRADE

Loud, colorful and radical: the ultimate weapon for professional hardcore freeriders. Tried-and-tested under the hardest conditions, torsionally stiff, uncompromising and makes a real statement.

DIN RANGE RECOM. SKIER’S WEIGHT STAND HEIGHT W/O SKI TOE SYSTEM AFD GLIDING PLATE STEP-IN HEEL COLOR COMBINATIONS WEIGHT (PAIR) ART. NO

8.0 - 18.0 60 + kg 22 mm Triple Pivot elite stainless steel, height adjustable, fixed Inter-Pivot patchwork 2048 g 7924P1JT

DIN RANGE RECOM. SKIER’S WEIGHT STAND HEIGHT W/O SKI TOE SYSTEM AFD GLIDING PLATE STEP-IN HEEL COLOR COMBINATIONS FEATURES

WEIGHT (PAIR) ART. NO.

3.0 - 11.0 30 - 110 kg 22 mm Triple Pivot light stainless steel, height adjustable Hollow linkage white - black - anthracite (c1) black - blue - white (c2) white - mint - black (c3) 1530 g (90 mm) / 1540 g (110 mm) 7424O1M +A/B (c1), +C/D (c2), +E/F (c3)


22

B I N D I N G S 2 0 1 5 -16

R U L E T H E M O U N TA I N

R OYA L FA M I LY

R OYA L FA M I LY

L O R D S. P.

SCHIZO

A Ski Patrol‘s dream Tour/Performance Boot compatible

60 mm continuous travel for perfectly balanced riding position

2015 - 2016

2015 - 2016

SP TECHNOLOGY

SP TECHNOLOGY

A binding for a single purpose: to meet the demands of the most respected on mountain professionals – the ski patrollers. To meet the specific demands of these unique and challenged athletes the newly designed, adjustable height toe pieces on the LORD S.P. can handle all types of ski boots, including both alpine and touring models and standards.

SCHIZO 14

RANGE OF USE

The top model Schizo 14 comes with the same new toe and heel design as the „regular“ Jester, providing a stunning performance in every condition. All Schizo models feature MARKER’s unique Multi-Stance Adjustor, offering 60 mm continuos travel for perfectly balanced riding positon. And all of this on the fly.

> MOST VERSATILE FREERIDE & ALL MOUNTAIN BINDING > COMPATIBLE FOR BOTH ISO STANDARDS (ALPINE AND TOURING BOOTS) +/-5 mm

> MAGNESIUM HEEL HOUSING > HIGH QUALITY METAL LEVER FOR EASY HEIGHT ADJUSTMENT

FEATURES

1. SP Technology Touring Boot Mode

2. SP Technology Alpine Boot Mode

LORD S . P. 14

RANGE OF USE

From remote couloirs, rock strewn faces, blizzard blown peaks, back bowls and crowded slopes, if you’re a ski patroller, the whole mountain is your office. The Lord S.P. is designed to meet the unique and demanding requirements of this special and highly respected target group. They need to be fast into every condition, capable of reaching injured or stranded skiers and boarders regardless of conditions and locations and stable to help bring skiers safely off the mountain. The new S.P. is up to these challenges and more and easily adjusts for compatibility with both alpine ski boot standards and rubber soled touring boot standards.

FEATURES

5.0 - 14.0 < 120 kg 22 mm Triple Pivot elite stainless steel, height adjustable Inter-Pivot black - white - teal 2370 g (90), 2400 g (110)

ART. N0.

7629N1LN / 7629N1LW (110)

DIN RANGE RECOM. SKIER’S WEIGHT STAND HEIGHT W/O SKI TOE SYSTEM AFD GLIDING PLATE STEP-IN HEEL COLOR COMBINATIONS WEIGHT (PAIR)

5.0 - 14.0 < 120 kg 25 mm Triple Pivot elite stainless steel Inter-Pivot black - powderblue - white 2460 g (90), 2465 g (110)

ART. NO

7625P1GA (90)/ 7625P1GB (110)

SCHIZO 1 1

RANGE OF USE

DIN RANGE RECOM. SKIER’S WEIGHT STAND HEIGHT W/O SKI TOE SYSTEM AFD GLIDING PLATE STEP-IN HEEL COLOR COMBINATIONS WEIGHT (PAIR)

NEW

Triple Pivot Light toe pieces and Hollow Linkage Heel like the Squire, outfitted with the Schizo option. Our unbeatably versatile combination for young freestylers — available for the coming season in Royal Blue tones. Recommended for skis over 76 mm, with 90 and 110 mm brakes available.

FEATURES

DIN RANGE RECOM. SKIER’S WEIGHT STAND HEIGHT W/O SKI TOE SYSTEM AFD GLIDING PLATE STEP-IN HEEL COLOR COMBINATIONS WEIGHT (PAIR)

3.0 - 11.0 30 - 110 kg 25 mm Triple Pivot light stainless steel Hollow linkage white - black - blue 1990 g (90), 1994 g (110)

ART. NO

7425P1MC (90) /7425P1MD (110)


22

B I N D I N G S 2 0 1 5 -16

R U L E T H E M O U N TA I N

R OYA L FA M I LY

R OYA L FA M I LY

L O R D S. P.

SCHIZO

A Ski Patrol‘s dream Tour/Performance Boot compatible

60 mm continuous travel for perfectly balanced riding position

2015 - 2016

2015 - 2016

SP TECHNOLOGY

SP TECHNOLOGY

A binding for a single purpose: to meet the demands of the most respected on mountain professionals – the ski patrollers. To meet the specific demands of these unique and challenged athletes the newly designed, adjustable height toe pieces on the LORD S.P. can handle all types of ski boots, including both alpine and touring models and standards.

SCHIZO 14

RANGE OF USE

The top model Schizo 14 comes with the same new toe and heel design as the „regular“ Jester, providing a stunning performance in every condition. All Schizo models feature MARKER’s unique Multi-Stance Adjustor, offering 60 mm continuos travel for perfectly balanced riding positon. And all of this on the fly.

> MOST VERSATILE FREERIDE & ALL MOUNTAIN BINDING > COMPATIBLE FOR BOTH ISO STANDARDS (ALPINE AND TOURING BOOTS) +/-5 mm

> MAGNESIUM HEEL HOUSING > HIGH QUALITY METAL LEVER FOR EASY HEIGHT ADJUSTMENT

FEATURES

1. SP Technology Touring Boot Mode

2. SP Technology Alpine Boot Mode

LORD S . P. 14

RANGE OF USE

From remote couloirs, rock strewn faces, blizzard blown peaks, back bowls and crowded slopes, if you’re a ski patroller, the whole mountain is your office. The Lord S.P. is designed to meet the unique and demanding requirements of this special and highly respected target group. They need to be fast into every condition, capable of reaching injured or stranded skiers and boarders regardless of conditions and locations and stable to help bring skiers safely off the mountain. The new S.P. is up to these challenges and more and easily adjusts for compatibility with both alpine ski boot standards and rubber soled touring boot standards.

FEATURES

5.0 - 14.0 < 120 kg 22 mm Triple Pivot elite stainless steel, height adjustable Inter-Pivot black - white - teal 2370 g (90), 2400 g (110)

ART. N0.

7629N1LN / 7629N1LW (110)

DIN RANGE RECOM. SKIER’S WEIGHT STAND HEIGHT W/O SKI TOE SYSTEM AFD GLIDING PLATE STEP-IN HEEL COLOR COMBINATIONS WEIGHT (PAIR)

5.0 - 14.0 < 120 kg 25 mm Triple Pivot elite stainless steel Inter-Pivot black - powderblue - white 2460 g (90), 2465 g (110)

ART. NO

7625P1GA (90)/ 7625P1GB (110)

SCHIZO 1 1

RANGE OF USE

DIN RANGE RECOM. SKIER’S WEIGHT STAND HEIGHT W/O SKI TOE SYSTEM AFD GLIDING PLATE STEP-IN HEEL COLOR COMBINATIONS WEIGHT (PAIR)

NEW

Triple Pivot Light toe pieces and Hollow Linkage Heel like the Squire, outfitted with the Schizo option. Our unbeatably versatile combination for young freestylers — available for the coming season in Royal Blue tones. Recommended for skis over 76 mm, with 90 and 110 mm brakes available.

FEATURES

DIN RANGE RECOM. SKIER’S WEIGHT STAND HEIGHT W/O SKI TOE SYSTEM AFD GLIDING PLATE STEP-IN HEEL COLOR COMBINATIONS WEIGHT (PAIR)

3.0 - 11.0 30 - 110 kg 25 mm Triple Pivot light stainless steel Hollow linkage white - black - blue 1990 g (90), 1994 g (110)

ART. NO

7425P1MC (90) /7425P1MD (110)


25

B I N D I N G S 2 0 1 5 -16

R U L E T H E M O U N TA I N

JUNIOR

JUNIOR

F R E E

P E R F O R M AN C E

2015 - 2016

2015 - 2016

FREE TEN

RANGE OF USE

M 7.0 EP S

RANGE OF USE

The ideal choice for all freeride and freestyle starters, coming in a royal design and with a freeride brake designed for the application.

FEATURES

DIN RANGE RECOM. SKIER’S WEIGHT STAND HEIGHT W/O SKI TOE SYSTEM AFD GLIDING PLATE STEP-IN HEEL COLOR COMBINATIONS WEIGHT (PAIR)

3.0 - 10.0 30 - 105 kg 23 mm Triple Pivot light Gliding AFD Compact 2 white - black - anthracite 1434 g (85), 1440 g (100)

ART. NO

7224O1MA (85) / 7224O1MB (100)

M 7.0 FREE

RANGE OF USE

FEATURES

Comes with EPS and active AFD gliding plate as well as with Quick Adjust Compact heel and the Biotech system.

DIN RANGE RECOM. SKIER’S WEIGHT STAND HEIGHT W/O SKI TOE SYSTEM AFD GLIDING PLATE STEP-IN HEEL COLOR COMBINATIONS WEIGHT (PAIR) FEATURES

ART. NO

2.0 - 7.0 24-75 kg 18 mm Biotech 4-linkage jr. Active AFD Compact Junior white - black (c1)/ white - anthracite - blue (c2)

1222 g 6220M1W+S (c1),+B (c2), +W (85mm c1)

M 4. 5 EP S

RANGE OF USE

For all the junior stylers we recommend the M 7.0 Free with EPS, AFD gliding plate, Quick Adjust Compact heel and Biotech system.

Built on the same platform as the 7.0 and with active AFD gliding plate, Quick Adjust Compact heel and the Biotech system, and tailor-made for the youngster.

DIN RANGE RECOM. SKIER’S WEIGHT STAND HEIGHT W/O SKI TOE SYSTEM AFD GLIDING PLATE STEP-IN HEEL COLOR COMBINATIONS WEIGHT (PAIR)

2.0 - 7.0 24 - 75 kg 18 mm Biotech 4-linkage Jr. Active AFD Compact Junior black - green - blue 1230 g

DIN RANGE RECOM. SKIER’S WEIGHT STAND HEIGHT W/O SKI TOE SYSTEM AFD GLIDING PLATE STEP-IN HEEL COLOR COMBINATIONS WEIGHT (PAIR)

ART. NO

6220N1MF

FEATURES

ART. NO

0.75 - 4.5 12 - 57 kg 18 mm Biotech 4-linkage jr. Active AFD Compact Junior white - black (c1)/ white - anthracite - blue (c2)

1208 g 6120M1W+S(c1), +B(c2), +W (85mm c1)


25

B I N D I N G S 2 0 1 5 -16

R U L E T H E M O U N TA I N

JUNIOR

JUNIOR

F R E E

P E R F O R M AN C E

2015 - 2016

2015 - 2016

FREE TEN

RANGE OF USE

M 7.0 EP S

RANGE OF USE

The ideal choice for all freeride and freestyle starters, coming in a royal design and with a freeride brake designed for the application.

FEATURES

DIN RANGE RECOM. SKIER’S WEIGHT STAND HEIGHT W/O SKI TOE SYSTEM AFD GLIDING PLATE STEP-IN HEEL COLOR COMBINATIONS WEIGHT (PAIR)

3.0 - 10.0 30 - 105 kg 23 mm Triple Pivot light Gliding AFD Compact 2 white - black - anthracite 1434 g (85), 1440 g (100)

ART. NO

7224O1MA (85) / 7224O1MB (100)

M 7.0 FREE

RANGE OF USE

FEATURES

Comes with EPS and active AFD gliding plate as well as with Quick Adjust Compact heel and the Biotech system.

DIN RANGE RECOM. SKIER’S WEIGHT STAND HEIGHT W/O SKI TOE SYSTEM AFD GLIDING PLATE STEP-IN HEEL COLOR COMBINATIONS WEIGHT (PAIR) FEATURES

ART. NO

2.0 - 7.0 24-75 kg 18 mm Biotech 4-linkage jr. Active AFD Compact Junior white - black (c1)/ white - anthracite - blue (c2)

1222 g 6220M1W+S (c1),+B (c2), +W (85mm c1)

M 4. 5 EP S

RANGE OF USE

For all the junior stylers we recommend the M 7.0 Free with EPS, AFD gliding plate, Quick Adjust Compact heel and Biotech system.

Built on the same platform as the 7.0 and with active AFD gliding plate, Quick Adjust Compact heel and the Biotech system, and tailor-made for the youngster.

DIN RANGE RECOM. SKIER’S WEIGHT STAND HEIGHT W/O SKI TOE SYSTEM AFD GLIDING PLATE STEP-IN HEEL COLOR COMBINATIONS WEIGHT (PAIR)

2.0 - 7.0 24 - 75 kg 18 mm Biotech 4-linkage Jr. Active AFD Compact Junior black - green - blue 1230 g

DIN RANGE RECOM. SKIER’S WEIGHT STAND HEIGHT W/O SKI TOE SYSTEM AFD GLIDING PLATE STEP-IN HEEL COLOR COMBINATIONS WEIGHT (PAIR)

ART. NO

6220N1MF

FEATURES

ART. NO

0.75 - 4.5 12 - 57 kg 18 mm Biotech 4-linkage jr. Active AFD Compact Junior white - black (c1)/ white - anthracite - blue (c2)

1208 g 6120M1W+S(c1), +B(c2), +W (85mm c1)


26

B I N D I N G S 2 0 1 5 -16

27

R U L E T H E M O U N TA I N

ALPINE

P E R F O R M A N C E 2015 - 2016

THE ULTIM ATE VIBR ATION OB JEC T A new era in performance skiing — the new U.V.O. The dampening system from MARKER is the first in the history of skiing to offer 360° dampening for the ski. While traditional systems account only for the longitudinal axis, the U.V.O. system works in all directions. It compensates for unwanted vibration in the ski, with no detriment to agility. The results are an impressively quiet ride even at high speeds, with greater precision through turns and in particular greater control on rough surfaces. > IMPROVED RIDE QUIETNESS

M 11 .0 TC EP S

RANGE OF USE

The brand new addition to the range with an excellent price-performance ratio, the ideal combination with flat on piste skis. The proven Twin Cam heel provides great step-in comfort and riding safety.

FEATURES

DIN RANGE RECOM. SKIER’S WEIGHT STAND HEIGHT W/O SKI TOE SYSTEM AFD GLIDING PLATE STEP-IN HEEL COLOR COMBINATIONS WEIGHT (PAIR) ART. NO

3.0 - 11.0 30-110 kg 19 mm Triple Pivot Compact stainless steel Twin Cam white - silver - black (c1)/ black - silver (2) 1970 g 6720P1MA (c1), 6720O1MB (c2)

HOW TO MOUNT THE UVO > VIDEO + INSTRUCTION ON: EXTRANET.MARKER.NET

> GREATER PRECISION > GREATER CONTROL > DESTINED FOR ON-PISTE USE

ART. NO. V001M1S

VIBR ATION REDUC TION WITH U VO 1. MOVEMENT OF THE SHOVEL ALONG THE Z AXIS

2. MOVEMENT OF THE SHOVEL ALONG THE Y AXIS

3. TORSION ALONG THE X AXIS

(vertical: up/down along the direction of travel): Stabilization of the shovel at high speeds and on choppy surfaces

(horizontal: left/right along the direction of travel) Less “chatter” on hard surfaces

(length of the skis) Reduction of shovel torsion. Direct power transfer that reduces loss of edge energy and grip; quicker, more reliable turn initiation

10.0 EP S

RANGE OF USE

Completely re-designed toe and heel, delivering a stunning performance for the young and light-weight carving novices.

z

X Y

FEATURES

DIN RANGE RECOM. SKIER’S WEIGHT STAND HEIGHT W/O SKI TOE SYSTEM AFD GLIDING PLATE STEP-IN HEEL COLOR COMBINATIONS WEIGHT (PAIR) ART. NO

3.0 - 10.0 30-105 kg 23 mm 2linkage Gliding AFD Compact 2 white - black 1500 g 6520N1VA

Z

X

Y

X


26

B I N D I N G S 2 0 1 5 -16

27

R U L E T H E M O U N TA I N

ALPINE

P E R F O R M A N C E 2015 - 2016

THE ULTIM ATE VIBR ATION OB JEC T A new era in performance skiing — the new U.V.O. The dampening system from MARKER is the first in the history of skiing to offer 360° dampening for the ski. While traditional systems account only for the longitudinal axis, the U.V.O. system works in all directions. It compensates for unwanted vibration in the ski, with no detriment to agility. The results are an impressively quiet ride even at high speeds, with greater precision through turns and in particular greater control on rough surfaces. > IMPROVED RIDE QUIETNESS

M 11 .0 TC EP S

RANGE OF USE

The brand new addition to the range with an excellent price-performance ratio, the ideal combination with flat on piste skis. The proven Twin Cam heel provides great step-in comfort and riding safety.

FEATURES

DIN RANGE RECOM. SKIER’S WEIGHT STAND HEIGHT W/O SKI TOE SYSTEM AFD GLIDING PLATE STEP-IN HEEL COLOR COMBINATIONS WEIGHT (PAIR) ART. NO

3.0 - 11.0 30-110 kg 19 mm Triple Pivot Compact stainless steel Twin Cam white - silver - black (c1)/ black - silver (2) 1970 g 6720P1MA (c1), 6720O1MB (c2)

HOW TO MOUNT THE UVO > VIDEO + INSTRUCTION ON: EXTRANET.MARKER.NET

> GREATER PRECISION > GREATER CONTROL > DESTINED FOR ON-PISTE USE

ART. NO. V001M1S

VIBR ATION REDUC TION WITH U VO 1. MOVEMENT OF THE SHOVEL ALONG THE Z AXIS

2. MOVEMENT OF THE SHOVEL ALONG THE Y AXIS

3. TORSION ALONG THE X AXIS

(vertical: up/down along the direction of travel): Stabilization of the shovel at high speeds and on choppy surfaces

(horizontal: left/right along the direction of travel) Less “chatter” on hard surfaces

(length of the skis) Reduction of shovel torsion. Direct power transfer that reduces loss of edge energy and grip; quicker, more reliable turn initiation

10.0 EP S

RANGE OF USE

Completely re-designed toe and heel, delivering a stunning performance for the young and light-weight carving novices.

z

X Y

FEATURES

DIN RANGE RECOM. SKIER’S WEIGHT STAND HEIGHT W/O SKI TOE SYSTEM AFD GLIDING PLATE STEP-IN HEEL COLOR COMBINATIONS WEIGHT (PAIR) ART. NO

3.0 - 10.0 30-105 kg 23 mm 2linkage Gliding AFD Compact 2 white - black 1500 g 6520N1VA

Z

X

Y

X


28

B I N D I N G S 2 0 1 5 -16

29

XCELL 1 2 DEMO

RANGE OF USE

P E R F O R M A N C E / R OYA L FA M I LY / J U N I O R

RENTAL/DEMO 2015 - 2016

FEATURES

> Easy-to-read sole length scale

> Asynchronous adjustment

> Including rental barcode

> Ergonomic lever position

> Adjustable even when boot is already in the binding

> Easily visible pressure display

> Highly durable

NEW

New in the coming season: the full performance of the Xcell 12.0 on the new demo system. Optimal supplement in the rental business for all high-performance alpine skis.

The Future of the Demo System

Features:

R U L E T H E M O U N TA I N

DIN RANGE RECOM. SKIER’S WEIGHT STAND HEIGHT W/O SKI TOE SYSTEM AFD GLIDING PLATE STEP-IN HEEL COLOR COMBINATIONS WEIGHT (PAIR) ART. NO

4.0 - 12.0 <120 kg 32 mm (toe) 30 mm (heel) Xcell Toe stainless steel Twin Cam X white - black - petrol 3700 g 6878P1WA (SYSTEM)

FA S TR AK III

RANGE OF USE

One of the lightest rental binding in its class. A fast and easy to access fully synchronized demo system, mounted on a premountable base plate.

FEATURES

FDT TP 1 1

RANGE OF USE

NEW

Light and ultra-athletic for demanding rental customers: The new FDT TP 11 binding combines the skiing performance of Triple Pivot toe pieces with the comfort of the Comfort heel. Paired with the new demo base plate, this gear will be a star performer in the daily life of a rental business.

FEATURES

FDT TP 10

RANGE OF USE

FEATURES

6523N1MS

NEW

Here comes the next generation of the successful Fastrak series: the proven Compact Heel piece combined with the sporting Triple Pivot toe piece on the Fastrak demo base plate. Rental deluxe!

25 mm TP Comfort stainless steel Comfort black - black 1612 g, 1996 g (SYSTEM) 6662P1MC 6663P1MC (SYSTEM)

FEATURES

DIN RANGE RECOM. SKIER’S WEIGHT STAND HEIGHT W/O SKI TOE SYSTEM AFD GLIDING PLATE STEP-IN HEEL COLOR COMBINATIONS WEIGHT (PAIR) ART. NO

3.0 - 10.0 30 - 105 kg 35 mm Triple Pivot Comfort stainless steel Compact 2 black - white - silver 2310 g 6523P1SS (SYSTEM) 6523P1MS

NEW

Light weight and simple handling for both rental team and customer. With a DIN range up to 10, the FDT TP 10 is the perfect choice for lighter skiers.

DIN RANGE RECOM. SKIER’S WEIGHT STAND HEIGHT W/O SKI TOE SYSTEM AFD GLIDING PLATE STEP-IN HEEL COLOR COMBINATIONS WEIGHT (PAIR) ART. NO.

3.0 - 10.0 30 - 105 kg 35 mm 2Linkage Gliding AFD Compact 2 black - white - silver 2316 g

FA S TR AK III TP

RANGE OF USE

3.0 - 11.0

DIN RANGE RECOM. SKIER’S WEIGHT STAND HEIGHT W/O SKI TOE SYSTEM AFD GLIDING PLATE STEP-IN HEEL COLOR COMBINATIONS WEIGHT (PAIR) ART. NO.

DIN RANGE RECOM. SKIER’S WEIGHT STAND HEIGHT W/O SKI TOE SYSTEM AFD GLIDING PLATE STEP-IN HEEL COLOR COMBINATIONS WEIGHT (PAIR) ART. NO

G LIDE CONTROL D S YS 1 2

RANGE OF USE

2260 g and built to carve! Equipped with the D-System, offering perfect power transmission and edge grip due to a wider stance on a sole length from 262 - 374 mm. The D-System can be precisely and quickly adjusted with just a single operation.

3.0 - 10.0 25 mm TP Comfort stainless steel Compact black - black - white 1562 g, 1946 g (SYSTEM) 6562P1MC 6563P1MC (SYSTEM)

FEATURES

DIN RANGE RECOM. SKIER’S WEIGHT STAND HEIGHT W/O SKI TOE SYSTEM AFD GLIDING PLATE STEP-IN HEEL COLOR COMBINATIONS WEIGHT (PAIR) ART. NO

4.0 - 12.0 <120 kg 28 mm Triple Pivot Comfort stainless steel Twin Cam 3 white - silver - black 2266 g (110 mm)/ 2262 g (85 mm) 6826O1MA (85 mm) 6826O1MB (110 mm)


28

B I N D I N G S 2 0 1 5 -16

29

XCELL 1 2 DEMO

RANGE OF USE

P E R F O R M A N C E / R OYA L FA M I LY / J U N I O R

RENTAL/DEMO 2015 - 2016

FEATURES

> Easy-to-read sole length scale

> Asynchronous adjustment

> Including rental barcode

> Ergonomic lever position

> Adjustable even when boot is already in the binding

> Easily visible pressure display

> Highly durable

NEW

New in the coming season: the full performance of the Xcell 12.0 on the new demo system. Optimal supplement in the rental business for all high-performance alpine skis.

The Future of the Demo System

Features:

R U L E T H E M O U N TA I N

DIN RANGE RECOM. SKIER’S WEIGHT STAND HEIGHT W/O SKI TOE SYSTEM AFD GLIDING PLATE STEP-IN HEEL COLOR COMBINATIONS WEIGHT (PAIR) ART. NO

4.0 - 12.0 <120 kg 32 mm (toe) 30 mm (heel) Xcell Toe stainless steel Twin Cam X white - black - petrol 3700 g 6878P1WA (SYSTEM)

FA S TR AK III

RANGE OF USE

One of the lightest rental binding in its class. A fast and easy to access fully synchronized demo system, mounted on a premountable base plate.

FEATURES

FDT TP 1 1

RANGE OF USE

NEW

Light and ultra-athletic for demanding rental customers: The new FDT TP 11 binding combines the skiing performance of Triple Pivot toe pieces with the comfort of the Comfort heel. Paired with the new demo base plate, this gear will be a star performer in the daily life of a rental business.

FEATURES

FDT TP 10

RANGE OF USE

FEATURES

6523N1MS

NEW

Here comes the next generation of the successful Fastrak series: the proven Compact Heel piece combined with the sporting Triple Pivot toe piece on the Fastrak demo base plate. Rental deluxe!

25 mm TP Comfort stainless steel Comfort black - black 1612 g, 1996 g (SYSTEM) 6662P1MC 6663P1MC (SYSTEM)

FEATURES

DIN RANGE RECOM. SKIER’S WEIGHT STAND HEIGHT W/O SKI TOE SYSTEM AFD GLIDING PLATE STEP-IN HEEL COLOR COMBINATIONS WEIGHT (PAIR) ART. NO

3.0 - 10.0 30 - 105 kg 35 mm Triple Pivot Comfort stainless steel Compact 2 black - white - silver 2310 g 6523P1SS (SYSTEM) 6523P1MS

NEW

Light weight and simple handling for both rental team and customer. With a DIN range up to 10, the FDT TP 10 is the perfect choice for lighter skiers.

DIN RANGE RECOM. SKIER’S WEIGHT STAND HEIGHT W/O SKI TOE SYSTEM AFD GLIDING PLATE STEP-IN HEEL COLOR COMBINATIONS WEIGHT (PAIR) ART. NO.

3.0 - 10.0 30 - 105 kg 35 mm 2Linkage Gliding AFD Compact 2 black - white - silver 2316 g

FA S TR AK III TP

RANGE OF USE

3.0 - 11.0

DIN RANGE RECOM. SKIER’S WEIGHT STAND HEIGHT W/O SKI TOE SYSTEM AFD GLIDING PLATE STEP-IN HEEL COLOR COMBINATIONS WEIGHT (PAIR) ART. NO.

DIN RANGE RECOM. SKIER’S WEIGHT STAND HEIGHT W/O SKI TOE SYSTEM AFD GLIDING PLATE STEP-IN HEEL COLOR COMBINATIONS WEIGHT (PAIR) ART. NO

G LIDE CONTROL D S YS 1 2

RANGE OF USE

2260 g and built to carve! Equipped with the D-System, offering perfect power transmission and edge grip due to a wider stance on a sole length from 262 - 374 mm. The D-System can be precisely and quickly adjusted with just a single operation.

3.0 - 10.0 25 mm TP Comfort stainless steel Compact black - black - white 1562 g, 1946 g (SYSTEM) 6562P1MC 6563P1MC (SYSTEM)

FEATURES

DIN RANGE RECOM. SKIER’S WEIGHT STAND HEIGHT W/O SKI TOE SYSTEM AFD GLIDING PLATE STEP-IN HEEL COLOR COMBINATIONS WEIGHT (PAIR) ART. NO

4.0 - 12.0 <120 kg 28 mm Triple Pivot Comfort stainless steel Twin Cam 3 white - silver - black 2266 g (110 mm)/ 2262 g (85 mm) 6826O1MA (85 mm) 6826O1MB (110 mm)


31

B I N D I N G S 2 0 1 5 -16

R U L E T H E M O U N TA I N

JES TER 16 DEMO

RANGE OF USE

Optimized for the rental market with individually configurable toe and heel pieces, the Jester can handle the extreme demands of this growing market segment and without sacrificing ski performance by mounting a skinny rental binding.

FEATURES

DIN RANGE RECOM. SKIER’S WEIGHT STAND HEIGHT W/O SKI TOE SYSTEM AFD GLIDING PLATE STEP-IN HEEL COLOR COMBINATIONS WEIGHT (PAIR)

6.0 - 16.0 60 + kg 25 mm Triple Pivot Elite stainless steel Inter-Pivot black - black 2390 g (90), 2396 g (110)

ART. NO

7620O1J+A/B

G RIFFON 1 3 DEMO

RANGE OF USE

The Griffon 13 with individually adjustable toe and heel. With well approved new toe and heel design offers like the Jester 16 demo ideal conditions in the freeski area and is specially designed for lighter riders.

FA S TR AK II JUNIOR

RANGE OF USE

FEATURES

Sole length 200 - 285 mm (4.5) / 245 - 330 mm (7.0) Developed for the younger riders, the M 4.5 and M 7.0 Fastrak II systems offer the perfect solution for rental and ski schools. The sole lengths are tied to the specific DIN ranges of each binding. Easy to operate, easy to secure! M 7.0

FEATURES

DIN RANGE RECOM. SKIER’S WEIGHT STAND HEIGHT W/O SKI TOE SYSTEM AFD GLIDING PLATE STEP-IN HEEL COLOR COMBINATIONS WEIGHT (PAIR)

ART. NO

0.75 - 4.5 12 - 57 kg 25 mm Biotech 4-linkage jr. Active AFD Compact Junior white - black 1400 g / 1408 g (85mm) 6123M1SR (SYSTEM) 6223M1LR (SYSTEM) 6123M1SB (SYSTEM, 85) 6223M1LB (SYSTEM, 85) 6223M1LC, 6223M1LW (85) 6123M1SC

FEATURES

ART. NO

7520P1G+A (90)/B (110)

SQUIRE 1 1 DEMO

RANGE OF USE

The perfect binding with individually adjustable toe and heel for the young and aspiring light-weight freeskiers.

FEATURES

Especially the younger clients want to ski, not wait. MARKER‘s Junior RTL series is the ideal choice for fast and convenient mounting and adjusting needs, perfectly suited for the lighter weight skier. And they‘re the lightest junior rental bindings on the market.

DIN RANGE RECOM. SKIER’S WEIGHT STAND HEIGHT W/O SKI TOE SYSTEM AFD GLIDING PLATE STEP-IN HEEL COLOR COMBINATIONS WEIGHT (PAIR) ART. NO

4.0 - 13.0 < 120 kg 25 mm Triple Pivot Elite stainless steel Inter-Pivot black - powder - white 2280 g (90), 2286 g (110)

M 4.5

2-7 24 - 75 kg 25 mm Biotech 4-linkage jr. Active AFD Compact Junior white - black 1468g / 1474 g (85mm)

JUNIOR RTL

RANGE OF USE

DIN RANGE RECOM. SKIER’S WEIGHT STAND HEIGHT W/O SKI TOE SYSTEM AFD GLIDING PLATE STEP-IN HEEL COLOR COMBINATIONS WEIGHT (PAIR)

M 7.0 RTL

M 4.5 RTL

2-7 24 - 75 kg 18 mm Biotech 4-linkage jr. Active AFD Compact Junior white - black 1340 g / 1360 g (85 mm)

0.75 - 4.5 12 - 57 kg 18 mm Biotech 4-linkage jr. Active AFD Compact Junior white - black 1340 g

6220M1MR 6220M1MW (85 mm)

6120M1MR

DIN RANGE RECOM. SKIER’S WEIGHT STAND HEIGHT W/O SKI TOE SYSTEM AFD GLIDING PLATE STEP-IN HEEL COLOR COMBINATIONS WEIGHT (PAIR)

3.0 - 11.0 30 - 110 kg 25 mm Triple Pivot light stainless steel Hollow Linkage white - black - anthracite 1822 g (90), 1832 g (110)

ART. NO

7420O1M+A (90)/B (110)


31

B I N D I N G S 2 0 1 5 -16

R U L E T H E M O U N TA I N

JES TER 16 DEMO

RANGE OF USE

Optimized for the rental market with individually configurable toe and heel pieces, the Jester can handle the extreme demands of this growing market segment and without sacrificing ski performance by mounting a skinny rental binding.

FEATURES

DIN RANGE RECOM. SKIER’S WEIGHT STAND HEIGHT W/O SKI TOE SYSTEM AFD GLIDING PLATE STEP-IN HEEL COLOR COMBINATIONS WEIGHT (PAIR)

6.0 - 16.0 60 + kg 25 mm Triple Pivot Elite stainless steel Inter-Pivot black - black 2390 g (90), 2396 g (110)

ART. NO

7620O1J+A/B

G RIFFON 1 3 DEMO

RANGE OF USE

The Griffon 13 with individually adjustable toe and heel. With well approved new toe and heel design offers like the Jester 16 demo ideal conditions in the freeski area and is specially designed for lighter riders.

FA S TR AK II JUNIOR

RANGE OF USE

FEATURES

Sole length 200 - 285 mm (4.5) / 245 - 330 mm (7.0) Developed for the younger riders, the M 4.5 and M 7.0 Fastrak II systems offer the perfect solution for rental and ski schools. The sole lengths are tied to the specific DIN ranges of each binding. Easy to operate, easy to secure! M 7.0

FEATURES

DIN RANGE RECOM. SKIER’S WEIGHT STAND HEIGHT W/O SKI TOE SYSTEM AFD GLIDING PLATE STEP-IN HEEL COLOR COMBINATIONS WEIGHT (PAIR)

ART. NO

0.75 - 4.5 12 - 57 kg 25 mm Biotech 4-linkage jr. Active AFD Compact Junior white - black 1400 g / 1408 g (85mm) 6123M1SR (SYSTEM) 6223M1LR (SYSTEM) 6123M1SB (SYSTEM, 85) 6223M1LB (SYSTEM, 85) 6223M1LC, 6223M1LW (85) 6123M1SC

FEATURES

ART. NO

7520P1G+A (90)/B (110)

SQUIRE 1 1 DEMO

RANGE OF USE

The perfect binding with individually adjustable toe and heel for the young and aspiring light-weight freeskiers.

FEATURES

Especially the younger clients want to ski, not wait. MARKER‘s Junior RTL series is the ideal choice for fast and convenient mounting and adjusting needs, perfectly suited for the lighter weight skier. And they‘re the lightest junior rental bindings on the market.

DIN RANGE RECOM. SKIER’S WEIGHT STAND HEIGHT W/O SKI TOE SYSTEM AFD GLIDING PLATE STEP-IN HEEL COLOR COMBINATIONS WEIGHT (PAIR) ART. NO

4.0 - 13.0 < 120 kg 25 mm Triple Pivot Elite stainless steel Inter-Pivot black - powder - white 2280 g (90), 2286 g (110)

M 4.5

2-7 24 - 75 kg 25 mm Biotech 4-linkage jr. Active AFD Compact Junior white - black 1468g / 1474 g (85mm)

JUNIOR RTL

RANGE OF USE

DIN RANGE RECOM. SKIER’S WEIGHT STAND HEIGHT W/O SKI TOE SYSTEM AFD GLIDING PLATE STEP-IN HEEL COLOR COMBINATIONS WEIGHT (PAIR)

M 7.0 RTL

M 4.5 RTL

2-7 24 - 75 kg 18 mm Biotech 4-linkage jr. Active AFD Compact Junior white - black 1340 g / 1360 g (85 mm)

0.75 - 4.5 12 - 57 kg 18 mm Biotech 4-linkage jr. Active AFD Compact Junior white - black 1340 g

6220M1MR 6220M1MW (85 mm)

6120M1MR

DIN RANGE RECOM. SKIER’S WEIGHT STAND HEIGHT W/O SKI TOE SYSTEM AFD GLIDING PLATE STEP-IN HEEL COLOR COMBINATIONS WEIGHT (PAIR)

3.0 - 11.0 30 - 110 kg 25 mm Triple Pivot light stainless steel Hollow Linkage white - black - anthracite 1822 g (90), 1832 g (110)

ART. NO

7420O1M+A (90)/B (110)


32

B I N D I N G S 2 0 1 5 -16

33

R U L E T H E M O U N TA I N

MARKER

ACC E S S O I R E S

UTILITIES The little helpers that make your life so much easier...

2015 - 2016

BR AKES

FREERIDE BRAKES ORDER NO . PRODUCT NAME Color

W015O1B/ W026O1B/ W016G1B/ W017G1B DUKE / JESTER / TOUR BRAKE; 136/120/110/ 90 MM black

STANDARD BRAKES

JUNIOR BRAKES

W018M1B

W004L1B

W023H1B

W014G1B

DUKE / JESTER BRAKE; 85 MM

BRAKE FREE TEN, 10.0 FREE; 100 MM

STANDARD BRAKE; 16.0 - M 9.0; 85 MM

JUNIOR BRAKE M JUNIOR BRAKE 7.0 - M 4.5 EPS, FASTRAK, M 7.0 - M 4.5; 85 MM RTL anthracite anthracite

black

black

TOUR BRAKES ORDER NO . PRODUCT NAME Color

black

W024K1B

BRAKE TOUR / COMPACT; 80 MM black

BRAKE TOUR / COMPACT; 85 MM black

W010P1B W011P1B BRAKE; 75-100 / 100-125 MM black

TOUR CRAMPON All sizes and order no. on the next page

2552

2565

Power bit 150 mm SBD (Pozidrive)

Binding drill bit 4.1 x 9.5

Allen key, ball end # 5

2637

2639

2653

2660

2661

2662

Binding drill bit 3.6 x 7.5

Binding drill bit 3.6 x 9.5 Bit

Trap-In insert PA 6 (100 pcs.)

Binding glue 100 ml

Screw driver slotted # 5.5

MARKER silicone spray 300 ml

W001G1T

Instal. Tool; 16.0 - M 9.0, Jester; Griffon; Schizo; 61 - 117 mm

W012J1T

Instal. Tool; 16.0 - M 9.0, Jester; Griffon; Schizo; 95 - 150 mm

W010G1T

Instal. Tool; Tour S & L; 61 - 117 mm

W011J1T

Instal. Tool; Tour S & L; 95 - 150 mm

W006M1T

Instal. Tool; Duke / Baron / Tour EPF S & L; 95 - 150 mm

W002O1T

Instal. Tool; World Cup plate; Junior Race interface 2; 61 - 117 mm

W003H1T

Instal. Tool Fastrak + Fastrak Jr.; 61 - 117 mm

W007H1T

Instal. Tool; M 7.0, M 4.5 + Jr. RTL

W005L1T

Instal. Tool; Glide Control D & Comp D System & Royal Demo

TOURING SKINS

W008P1T

Instal. Tool; KINGPIN; KINGPIN Demo; 70 - 126 mm

200 cm long, 13 cm wide, self-adhesive and customizable for every touring or freeride ski. Material: Mohair mix. ART.NO. 158703

W009P1T

Instal. Tool; Royal Demo & Xcell Demo & FDT; 61 - 117 mm

KINGPIN CRAMPON ORDER NO PRODUCT NAME

KINGPIN ACCESSOIERES

BLACK

2548

Power bit 150 mm fine (Pozidrive)

INS TALL ATION TOOL S

H001P1P CRAMPON 90 MM

H002P1P CRAMPON 105 MM

H003P1P CRAMPON 120 MM

(SKI WIDTH 75-90 MM)

(SKI WIDTH 90-105 MM)

(SKI WIDTH 105-120 MM)

ADAP TERS & OTHER

W012P1B KINGPIN AFD PLATE

2547

Screw driver Pozidrive # 3

W005L1B

CR A MP ON

ORDER NO PRODUCT NAME Color

2544

Gauge drill Ă˜ 8 mm (adjustable depth)

KINGPIN BRAKES

W022N1B

Super light anodized aluminium crampon for the TOUR bindings as well as the ride&hike bindings. Contrary to other systems the mounting position on the Tour bindings is right under the arch in order to provide maximum pressure and to ease hiking due to an optimal crampon position.

2541

KINGPIN DIN ADAPTER *for Dynafit TLT5/6

L001P1A TOURING LEASH


32

B I N D I N G S 2 0 1 5 -16

33

R U L E T H E M O U N TA I N

MARKER

ACC E S S O I R E S

UTILITIES The little helpers that make your life so much easier...

2015 - 2016

BR AKES

FREERIDE BRAKES ORDER NO . PRODUCT NAME Color

W015O1B/ W026O1B/ W016G1B/ W017G1B DUKE / JESTER / TOUR BRAKE; 136/120/110/ 90 MM black

STANDARD BRAKES

JUNIOR BRAKES

W018M1B

W004L1B

W023H1B

W014G1B

DUKE / JESTER BRAKE; 85 MM

BRAKE FREE TEN, 10.0 FREE; 100 MM

STANDARD BRAKE; 16.0 - M 9.0; 85 MM

JUNIOR BRAKE M JUNIOR BRAKE 7.0 - M 4.5 EPS, FASTRAK, M 7.0 - M 4.5; 85 MM RTL anthracite anthracite

black

black

TOUR BRAKES ORDER NO . PRODUCT NAME Color

black

W024K1B

BRAKE TOUR / COMPACT; 80 MM black

BRAKE TOUR / COMPACT; 85 MM black

W010P1B W011P1B BRAKE; 75-100 / 100-125 MM black

TOUR CRAMPON All sizes and order no. on the next page

2552

2565

Power bit 150 mm SBD (Pozidrive)

Binding drill bit 4.1 x 9.5

Allen key, ball end # 5

2637

2639

2653

2660

2661

2662

Binding drill bit 3.6 x 7.5

Binding drill bit 3.6 x 9.5 Bit

Trap-In insert PA 6 (100 pcs.)

Binding glue 100 ml

Screw driver slotted # 5.5

MARKER silicone spray 300 ml

W001G1T

Instal. Tool; 16.0 - M 9.0, Jester; Griffon; Schizo; 61 - 117 mm

W012J1T

Instal. Tool; 16.0 - M 9.0, Jester; Griffon; Schizo; 95 - 150 mm

W010G1T

Instal. Tool; Tour S & L; 61 - 117 mm

W011J1T

Instal. Tool; Tour S & L; 95 - 150 mm

W006M1T

Instal. Tool; Duke / Baron / Tour EPF S & L; 95 - 150 mm

W002O1T

Instal. Tool; World Cup plate; Junior Race interface 2; 61 - 117 mm

W003H1T

Instal. Tool Fastrak + Fastrak Jr.; 61 - 117 mm

W007H1T

Instal. Tool; M 7.0, M 4.5 + Jr. RTL

W005L1T

Instal. Tool; Glide Control D & Comp D System & Royal Demo

TOURING SKINS

W008P1T

Instal. Tool; KINGPIN; KINGPIN Demo; 70 - 126 mm

200 cm long, 13 cm wide, self-adhesive and customizable for every touring or freeride ski. Material: Mohair mix. ART.NO. 158703

W009P1T

Instal. Tool; Royal Demo & Xcell Demo & FDT; 61 - 117 mm

KINGPIN CRAMPON ORDER NO PRODUCT NAME

KINGPIN ACCESSOIERES

BLACK

2548

Power bit 150 mm fine (Pozidrive)

INS TALL ATION TOOL S

H001P1P CRAMPON 90 MM

H002P1P CRAMPON 105 MM

H003P1P CRAMPON 120 MM

(SKI WIDTH 75-90 MM)

(SKI WIDTH 90-105 MM)

(SKI WIDTH 105-120 MM)

ADAP TERS & OTHER

W012P1B KINGPIN AFD PLATE

2547

Screw driver Pozidrive # 3

W005L1B

CR A MP ON

ORDER NO PRODUCT NAME Color

2544

Gauge drill Ă˜ 8 mm (adjustable depth)

KINGPIN BRAKES

W022N1B

Super light anodized aluminium crampon for the TOUR bindings as well as the ride&hike bindings. Contrary to other systems the mounting position on the Tour bindings is right under the arch in order to provide maximum pressure and to ease hiking due to an optimal crampon position.

2541

KINGPIN DIN ADAPTER *for Dynafit TLT5/6

L001P1A TOURING LEASH


34

B I N D I N G S 2 0 1 5 -16

35

PERFORMANCE JUNIOR

ROYAL FAMILY FREERIDE

ORDER NO.

PRODUCT NAME

DIN - ISO Color

ORDER NO.

PRODUCT NAME

DIN - ISO Color

7616O1SA 7616O1LA

7516P1SA 7516P1LA

R U L E T H E M O U N TA I N

7924P1JT

DUKE 16 EPF S 265 - 325; 110 mm L 305 - 365; 110 mm

BARON 13 EPF S 265 - 325; 110 mm L 305 - 365; 110 mm

JESTER 18 PRO; 110 mm

6.0 - 16.0 black - black

4.0 - 13.0 black - white - silver

8.0 - 18.0 patchwork

UPGRADE

UPGRADE

7624O1JA 7624O1JB 7624O1JC

7524P1GA 7524P1GB 7524P1GC

7524P1GD 7524P1GE 7524P1GF

7629N1LN 7629N1LW

JESTER 16 90 mm 110 mm 136 mm 6.0 - 16.0 black - black

GRIFFON 13 90 mm 110 mm 120 mm 4.0 - 13.0 black - white - powderblue

GRIFFON 13 90 mm 110 mm 120 mm 4.0 - 13.0 white - black - teal

LORD SP 14 90 mm 110 mm

UPGRADE

UPGRADE

ROYAL FAMILY SCHIZO

FREE JUNIOR

ORDER NO.

PRODUCT NAME DIN - ISO Color

6220M1WS 6220N1WW (85mm)

6220M1WB

6120M1WS 6120M1WW (85mm)

6120M1WB

M 7.0 EPS 2.0 - 7.0 white - black

M 7.0 EPS 2.0 - 7.0 white - anthracite - blue

M 4.5 EPS 0.75 - 4.5 white - black

M 4.5 EPS 0.75 - 4.5 white - anthracite - blue

6662P1MC 6663P1MC (SYSTEM)

6562P1MC 6563P1MC (SYSTEM)

6878P1WA (SYSTEM)

6826O1MA 6826O1MB

6523P1SS (SYSTEM) 6523P1MS

6523N1MS

FDT TP 11

FDT TP 10

XCELL 12 DEMO

GLIDE CONTROL D SYS 12 85 mm, 110 mm 4.0 - 12.0 white - silver - black

FASTRAK III TP

FASTRAK III

3.0 - 10.0 black - white - silver

3.0 - 10.0 black - white - silver

5.0 - 14.0 black - white - teal

ALPINE RENTAL

7424O1MA 7424O1MB

7424O1MC 7424O1MD

7424O1ME 7424O1MF

7625P1GA 7625P1GB

7425P1MC 7425P1MD

7224O1MA 7224O1MB

6220N1MF

ORDER NO.

SQUIRE 11 90 mm 110 mm 3.0 - 11.0 white - black - anthracite

SQUIRE 11 90 mm 110 mm 3.0 - 11.0 black - blue - white

SQUIRE 11 90 mm 110 mm 3.0 - 11.0 white - mint - black

SCHIZO 14 90 mm 110 mm 5.0 - 14.0 black - white - powderblue

SCHIZO 11 90 mm 110 mm 3.0 - 11.0 white - black - blue

FREE TEN 85 mm (+ screw kit) 100 mm (+ screw kit) 3.0 - 10.0 white - black - anthracite

M 7.0 FREE 85 mm

PRODUCT NAME

2.0 - 7.0 black - green - blue

DIN - ISO Color

3.0 - 11.0 black - black

3.0 - 10.0 black - black

4.0 - 12.0 black - white - teal

NEW

NEW

NEW

NEW

NEW

TOUR

ORDER NO.

PRODUCT NAME

DIN - ISO Color

7816P1SE 7816P1LE

7816M1TA 7816M1TB

7716M1TC 7716M1TD

7933P1MA 7933P1MB

7733P1MA 7733P1MB

7734P1MA 7734P1MB

TOUR F12 EPF S 265 - 325; 110 mm L 305 - 365; 110 mm 4.0 - 12.0 black -a  nthracite -g   low yellow

TOUR F12 S 265 - 325; 90 mm L 305 - 365; 90 mm 4.0 - 12.0 black - red - white

TOUR F10 S 265 - 325; 90 mm L 305 - 365; 90 mm 3.0 - 10.0 black - white - red

KINGPIN 13 75 - 100 mm 100 - 125 mm 6.0 - 13.0 black - gold

KINGPIN 10 75 - 100 mm 100 - 125 mm 5.0 - 10.0 black - gold

KINGPIN 10 DEMO 75 - 100 mm 100 - 125 mm 5.0 - 10.0 black - gold

NEW

NEW

NEW

UPGRADE

COMPETITION

ORDER NO.

PRODUCT NAME DIN - ISO Color

ORDER NO.

ORDER NO.

PRODUCT NAME

DIN - ISO Color

COMPETITION JUNIOR

7120P1WM

6920O1WA

6820O1WA

6520P1WX

6520P1WA

6320P1WA

XCELL 24 12.0 - 24.0 white - black - glow red

XCELL 18 8.0 - 18.0 white - black - glow red

XCELL 16 6.0 - 16.0 white - black - teal

XCELL 12 4.0 - 12.0 white - black - teal

RACE 10 TCX 3.0 - 10.0 white - black - teal

RACE 10 3.0 - 10.0 white - black - teal

RACE JUNIOR 8 2.0 - 8.0 white - black - teal

NEW

NEW

NEW

NEW

NEW

ORDER NO.

PRODUCT NAME

Color

INTERFACE

6720P1MA

6720O1MB

6520N1VA

M 11.0 TC EPS 3.0 - 11.0 white - silver - black

M 11.0 TC EPS 3.0 - 11.0 black - silver

10.0 EPS 3.0 - 10.0 white - black

ORDER NO.

2020N1MW

7520P1GA 7520P1GB

7420O1MA 7420O1MB

6223M1LR (SYSTEM) 6123M1SR (SYSTEM) 6223M1LB (SYSTEM, 85) 6123M1SB (SYSTEM, 85) 6223M1LC (W/O PLATE) 6123M1SC (W/O PLATE) 6223M1LW (W/O PLATE, 85)

6220M1MR 6220M1MW (85 MM)

6120M1MR

JESTER 16 DEMO 90 mm 110 mm 6.0 - 16.0 black - black

GRIFFON 13 DEMO 90 mm 110 mm 4.0 - 13.0 black - white - powderblue

SQUIRE 11 DEMO 90 mm 110 mm 3.0 - 11.0 white - black - anthracite

M 7.0 FASTRAK II L 245 - 330 L 245 - 330; 85 mm 2.0 - 7.0 white - black

M 7.0 RTL

M 4.5 RTL

2.0 - 7.0 white - black

0.75 - 4.5 white - black

2022N1WS

WORLD CUP PC INTERFACE 14 MM white - black

ORDER NO.

Color

M 4.5 FASTRAK II S 200 - 285 S 200 - 285; 85 mm 0.75 - 4.5 white - black

STANDARD BRAKE JUNIOR BRAKES

W015O1B/ W026O1B/ W016G1B/ W017G1B

W018M1B

W004L1B

W023H1B

W014G1B

DUKE / JESTER / TOUR BRAKE; 136/120/110/ 90 MM black

DUKE / JESTER BRAKE; 85 MM

BRAKE FREE TEN, 10.0 FREE; 100 MM

STANDARD BRAKE; 16.0 - M 9.0; 85 MM

black

black

black

JUNIOR BRAKE JUNIOR BRAKE M 7.0 - M 4.5 EPS, FASTRAK, M 7.0 - M 4.5; 80 MM RTL anthracite anthracite

KINGPIN BRAKES

CRAMPON

TOUR BRAKES

PRODUCT NAME PRODUCT NAME WORLD CUP PC INTERFACE 10 MM DIN - ISO Color white - black

7620O1JA 7620O1JB

FREERIDE BRAKES

7130P1WC

PERFORMANCE

PRODUCT NAME DIN - ISO Color

ALPINE RENTAL JUNIOR

ROYAL FAMILY RENTAL

PIN TOUR

W002K1B

W022N1B

W024K1B

W010P1B / W011P1B

H003K1A

H001M1A

H002N1A

H004M1A

BRAKE TOUR / COMPACT; 80 MM black

BRAKE TOUR / COMPACT; 85 MM black

BRAKE; 75-100 / 100-125 MM black

CRAMPON 74 MM

CRAMPON 84 MM

CRAMPON 106 MM

CRAMPON 120 MM

L001P1A

158703

TOURING LEASH

TOURING SKINS (NOT SHOWN)

KINGPIN CRAMPON

KINGPIN ACCESSORIES

OUR PARTNERS

Being able to work closely together with some of the world’s biggest and well-renowned ski companies allows us not only to develop our own top level binding components but also to design factory systems, perfectly matched to the individual skis. This long-year relationship has helped us all to make skiing safer, faster, more competitive and more fun season after season.

ORDER NO.

PRODUCT NAME Color

H001P1P

H002P1P

H003P1P

W012P1B

A001P1D

CRAMPON 90 MM (SKI WIDTH 75-90 MM) black

CRAMPON 105 MM (SKI WIDTH 90-105 MM) black

CRAMPON 120 MM (SKI WIDTH 105-120 MM) black

KINGPIN AFD PLATFORM

KINGPIN DIN ADAPTER for Dynafit TLT 5/6

NEW

NEW

NEW

NEW

black NEW


34

B I N D I N G S 2 0 1 5 -16

35

PERFORMANCE JUNIOR

ROYAL FAMILY FREERIDE

ORDER NO.

PRODUCT NAME

DIN - ISO Color

ORDER NO.

PRODUCT NAME

DIN - ISO Color

7616O1SA 7616O1LA

7516P1SA 7516P1LA

R U L E T H E M O U N TA I N

7924P1JT

DUKE 16 EPF S 265 - 325; 110 mm L 305 - 365; 110 mm

BARON 13 EPF S 265 - 325; 110 mm L 305 - 365; 110 mm

JESTER 18 PRO; 110 mm

6.0 - 16.0 black - black

4.0 - 13.0 black - white - silver

8.0 - 18.0 patchwork

UPGRADE

UPGRADE

7624O1JA 7624O1JB 7624O1JC

7524P1GA 7524P1GB 7524P1GC

7524P1GD 7524P1GE 7524P1GF

7629N1LN 7629N1LW

JESTER 16 90 mm 110 mm 136 mm 6.0 - 16.0 black - black

GRIFFON 13 90 mm 110 mm 120 mm 4.0 - 13.0 black - white - powderblue

GRIFFON 13 90 mm 110 mm 120 mm 4.0 - 13.0 white - black - teal

LORD SP 14 90 mm 110 mm

UPGRADE

UPGRADE

ROYAL FAMILY SCHIZO

FREE JUNIOR

ORDER NO.

PRODUCT NAME DIN - ISO Color

6220M1WS 6220N1WW (85mm)

6220M1WB

6120M1WS 6120M1WW (85mm)

6120M1WB

M 7.0 EPS 2.0 - 7.0 white - black

M 7.0 EPS 2.0 - 7.0 white - anthracite - blue

M 4.5 EPS 0.75 - 4.5 white - black

M 4.5 EPS 0.75 - 4.5 white - anthracite - blue

6662P1MC 6663P1MC (SYSTEM)

6562P1MC 6563P1MC (SYSTEM)

6878P1WA (SYSTEM)

6826O1MA 6826O1MB

6523P1SS (SYSTEM) 6523P1MS

6523N1MS

FDT TP 11

FDT TP 10

XCELL 12 DEMO

GLIDE CONTROL D SYS 12 85 mm, 110 mm 4.0 - 12.0 white - silver - black

FASTRAK III TP

FASTRAK III

3.0 - 10.0 black - white - silver

3.0 - 10.0 black - white - silver

5.0 - 14.0 black - white - teal

ALPINE RENTAL

7424O1MA 7424O1MB

7424O1MC 7424O1MD

7424O1ME 7424O1MF

7625P1GA 7625P1GB

7425P1MC 7425P1MD

7224O1MA 7224O1MB

6220N1MF

ORDER NO.

SQUIRE 11 90 mm 110 mm 3.0 - 11.0 white - black - anthracite

SQUIRE 11 90 mm 110 mm 3.0 - 11.0 black - blue - white

SQUIRE 11 90 mm 110 mm 3.0 - 11.0 white - mint - black

SCHIZO 14 90 mm 110 mm 5.0 - 14.0 black - white - powderblue

SCHIZO 11 90 mm 110 mm 3.0 - 11.0 white - black - blue

FREE TEN 85 mm (+ screw kit) 100 mm (+ screw kit) 3.0 - 10.0 white - black - anthracite

M 7.0 FREE 85 mm

PRODUCT NAME

2.0 - 7.0 black - green - blue

DIN - ISO Color

3.0 - 11.0 black - black

3.0 - 10.0 black - black

4.0 - 12.0 black - white - teal

NEW

NEW

NEW

NEW

NEW

TOUR

ORDER NO.

PRODUCT NAME

DIN - ISO Color

7816P1SE 7816P1LE

7816M1TA 7816M1TB

7716M1TC 7716M1TD

7933P1MA 7933P1MB

7733P1MA 7733P1MB

7734P1MA 7734P1MB

TOUR F12 EPF S 265 - 325; 110 mm L 305 - 365; 110 mm 4.0 - 12.0 black -a  nthracite -g   low yellow

TOUR F12 S 265 - 325; 90 mm L 305 - 365; 90 mm 4.0 - 12.0 black - red - white

TOUR F10 S 265 - 325; 90 mm L 305 - 365; 90 mm 3.0 - 10.0 black - white - red

KINGPIN 13 75 - 100 mm 100 - 125 mm 6.0 - 13.0 black - gold

KINGPIN 10 75 - 100 mm 100 - 125 mm 5.0 - 10.0 black - gold

KINGPIN 10 DEMO 75 - 100 mm 100 - 125 mm 5.0 - 10.0 black - gold

NEW

NEW

NEW

UPGRADE

COMPETITION

ORDER NO.

PRODUCT NAME DIN - ISO Color

ORDER NO.

ORDER NO.

PRODUCT NAME

DIN - ISO Color

COMPETITION JUNIOR

7120P1WM

6920O1WA

6820O1WA

6520P1WX

6520P1WA

6320P1WA

XCELL 24 12.0 - 24.0 white - black - glow red

XCELL 18 8.0 - 18.0 white - black - glow red

XCELL 16 6.0 - 16.0 white - black - teal

XCELL 12 4.0 - 12.0 white - black - teal

RACE 10 TCX 3.0 - 10.0 white - black - teal

RACE 10 3.0 - 10.0 white - black - teal

RACE JUNIOR 8 2.0 - 8.0 white - black - teal

NEW

NEW

NEW

NEW

NEW

ORDER NO.

PRODUCT NAME

Color

INTERFACE

6720P1MA

6720O1MB

6520N1VA

M 11.0 TC EPS 3.0 - 11.0 white - silver - black

M 11.0 TC EPS 3.0 - 11.0 black - silver

10.0 EPS 3.0 - 10.0 white - black

ORDER NO.

2020N1MW

7520P1GA 7520P1GB

7420O1MA 7420O1MB

6223M1LR (SYSTEM) 6123M1SR (SYSTEM) 6223M1LB (SYSTEM, 85) 6123M1SB (SYSTEM, 85) 6223M1LC (W/O PLATE) 6123M1SC (W/O PLATE) 6223M1LW (W/O PLATE, 85)

6220M1MR 6220M1MW (85 MM)

6120M1MR

JESTER 16 DEMO 90 mm 110 mm 6.0 - 16.0 black - black

GRIFFON 13 DEMO 90 mm 110 mm 4.0 - 13.0 black - white - powderblue

SQUIRE 11 DEMO 90 mm 110 mm 3.0 - 11.0 white - black - anthracite

M 7.0 FASTRAK II L 245 - 330 L 245 - 330; 85 mm 2.0 - 7.0 white - black

M 7.0 RTL

M 4.5 RTL

2.0 - 7.0 white - black

0.75 - 4.5 white - black

2022N1WS

WORLD CUP PC INTERFACE 14 MM white - black

ORDER NO.

Color

M 4.5 FASTRAK II S 200 - 285 S 200 - 285; 85 mm 0.75 - 4.5 white - black

STANDARD BRAKE JUNIOR BRAKES

W015O1B/ W026O1B/ W016G1B/ W017G1B

W018M1B

W004L1B

W023H1B

W014G1B

DUKE / JESTER / TOUR BRAKE; 136/120/110/ 90 MM black

DUKE / JESTER BRAKE; 85 MM

BRAKE FREE TEN, 10.0 FREE; 100 MM

STANDARD BRAKE; 16.0 - M 9.0; 85 MM

black

black

black

JUNIOR BRAKE JUNIOR BRAKE M 7.0 - M 4.5 EPS, FASTRAK, M 7.0 - M 4.5; 80 MM RTL anthracite anthracite

KINGPIN BRAKES

CRAMPON

TOUR BRAKES

PRODUCT NAME PRODUCT NAME WORLD CUP PC INTERFACE 10 MM DIN - ISO Color white - black

7620O1JA 7620O1JB

FREERIDE BRAKES

7130P1WC

PERFORMANCE

PRODUCT NAME DIN - ISO Color

ALPINE RENTAL JUNIOR

ROYAL FAMILY RENTAL

PIN TOUR

W002K1B

W022N1B

W024K1B

W010P1B / W011P1B

H003K1A

H001M1A

H002N1A

H004M1A

BRAKE TOUR / COMPACT; 80 MM black

BRAKE TOUR / COMPACT; 85 MM black

BRAKE; 75-100 / 100-125 MM black

CRAMPON 74 MM

CRAMPON 84 MM

CRAMPON 106 MM

CRAMPON 120 MM

L001P1A

158703

TOURING LEASH

TOURING SKINS (NOT SHOWN)

KINGPIN CRAMPON

KINGPIN ACCESSORIES

OUR PARTNERS

Being able to work closely together with some of the world’s biggest and well-renowned ski companies allows us not only to develop our own top level binding components but also to design factory systems, perfectly matched to the individual skis. This long-year relationship has helped us all to make skiing safer, faster, more competitive and more fun season after season.

ORDER NO.

PRODUCT NAME Color

H001P1P

H002P1P

H003P1P

W012P1B

A001P1D

CRAMPON 90 MM (SKI WIDTH 75-90 MM) black

CRAMPON 105 MM (SKI WIDTH 90-105 MM) black

CRAMPON 120 MM (SKI WIDTH 105-120 MM) black

KINGPIN AFD PLATFORM

KINGPIN DIN ADAPTER for Dynafit TLT 5/6

NEW

NEW

NEW

NEW

black NEW


Turn static files into dynamic content formats.

Create a flipbook
Issuu converts static files into: digital portfolios, online yearbooks, online catalogs, digital photo albums and more. Sign up and create your flipbook.