Yibo Zeng Community Built by yibo zeng

A+CB

Architecture + CommunityBUILD

YIBO ZENG CERTIFICATE PROGRAM REPORT

CONTENTS PROJECT 1

ASSEMBLY DRAWING

SHOP DRAWING

Photos On Site

PROJECT 2

PROTOTYPE1 (Individual Design)

PROTOTYPE 2 (Three Person Group)

PROTOTYPE 3 (Nine Person Group)

PROJECT 3

PROJECT 1 BIKE STOP

COMMUNITY TABLE AT LOW LINE (Individual Design)

CSAW (Community Sustainable Activity Warehouse) is a educational resource for anyone interesting in doing community driven projects/activities. It is available as a platform to share work with one another and to inspire and inform communities everywhere. This website is a forum for builders, designers, artists, and advocates to share how they have impacted their communities and give advice to the next generation of community focuses people. Community. These are community based projects that impact a community of people and are generally public projects that are accessible by anyone in the community. Sustainable. These projects are sustainable, both environmentally and socially. The projects represented here strive to have a lasting positive impact on their communities and as little negative impact on the environment as possible. Activity. We chose the word activity to represent the projects because we donâ&#x20AC;&#x2122;t want the conversation to be limited to objects or art. Community is all about bringing people together in fellowship to create activities that improve the fundamental fabric of a community. Warehouse. This site is a warehouse of ideas and stories. We hope that it becomes a destination for anyone looking to impact their communities in a positive way. . The bike fix station is one stop along the under trail. The installation can provide the multiple functions. When people riding the bike and walking on the underline trial, they can stop at the fix station to pump the bike and have a rest on the bench. Also, the people living in the community can use the station to pump the football, basketball...The top structure is a big billboard face to the highway when people drive through the bridge.

PROTOTYPE1

Two prototypes before the final one. Try to simulate people’s behavior when they waiting for the bus. The whole installation not only provides shelter for the bus waiting but also provide the fix station for the back. The first generation has a “K“ shape in the back and adds a moveable wall in the front. The wall has metrical holes that make the wall can be operated by people who are waiting for the bus. The wall can be changed the pattern by changing the infill on the wall.

The second prototype is more pureness on the “K“ frame. But it provides more participation for people who are waiting for the bus. The seat on the frame is moveable and it connects with the top “arm“. When people sit on it the light on the top will turn on. And when people leave, the light will turn off. It is designed for the night waiting. That person will not miss the bus and the diver can be noticed by the light.

PROTOTYPE 2

PROTOTYPE 3

BIKE FIX

ASSEMBLY DRAWING Use: Architecture Folly Materials + Directions Count: 1

2X4Materials Pressure treated lumber + Directions: 2X62x4 Pressure terated lumber pressure treated lumber 3 Paint color (Blue Red Green)

2x6 pressure treated lumber 3 paint color (blue red green)

The whole drawing has two parts, assembly drawing and shop drawing. The principle of the drawing is simple and clear. That will be easy and quick to read in the shop.

ASSEMBLY

BIKE FIX

Table

ASSEMBLY B+C+B

Use:Table Piece need: B,C Note: Finsh Group 1 is improtant to the table. Because the piece C is more stable when screw from piece B side than shoot by angle.

Piece B

Piece C

Piece B

6" 7 1/2"7 1/2" 6"

Group 1

Table

ASSEMBLY

Table

1'-2" 3 1/4"6 1/4"

Group 2 B+E+F+G

2'-0"

Use: Table Piece need: B,E,F,G

2'-0"

1'-2" 3 1/4"6 1/4"

1'-7 3/4"

1'-7 3/4" 2'-3"

2'-3"

Piece G

Piece G Piece F Piece E

Piece F Piece E Piece G

Piece G

Piece B

BIKE FIX

ASSEMBLY

Bench

ASSEMBLY

Table

Group 3

Use: Table Piece need: Group 1,2, D

Piece D

9 1/4"

11 1/2"

11"

9 1/4"

BIKE FIX

ASSEMBLY Group 3+A

Use: Table Piece need: Group 1, A Note: Before screw the piece A, it will better to layout all the table top on the top and adjust the space.

Piece A

Group 3

3'-0 1/2"

2'-1 1/4"

2" 2"

0 1/2"

2'-1 1/4"

Table

BIKE FIX 7

ASSEMBLY

BIKE FIX

Bench

ASSEMBLY Group 4

J+I+J+P

Bench

1'-4 3/4" 5 3/4" 1'-4 3/4" 5 3/4"

Use:Bench Piece need: J, I, P Note: If want to hide the screw, the step1 can sctrew from the piece I side. Put 3 screws in the join as the triangle is more stable.

Piece J

Piece I

Piece J

Piece I 2 Step

Piece J Step 1

Piece J

Piece P Step 1

Step 3 Piece P

BIKE FIX 9

ASSEMBLY

H+Group 4

Bench

Use: Bench Piece need: H, Group4 Note: Give enough space on piece I. The end of the piece need plug in to the back frame.

Piece H

1 3/4" 1/2"

4 1/4"

Group 4

BIKE FIX

ASSEMBLY

Back Frame

BIKE FIX 11

ASSEMBLY Size information

2'-2 3/4"

2'-0 3/4"

2'-8 1/4"

4 3'-

1/2"

2'-5

3'-

Back Frame

6'-1"

6'-0"

1 1/

6'-1

1'-4

3'-4 3/4"

BIKE FIX

ASSEMBLY Group 5

Back Frame M+L+N+O+M+L+P

Use: Back Frame Piece need: L,M,N,O,P Note: Use jag to put all the piece, it will make the distence accurate.

Piece N

Piece O Piece M Piece L

Piece P

BIKE FIX 13

ASSEMBLY

Group 5 + K

Back Frame

Use: Back Frame Piece need: Group 5,K Note: Laydown the Group 5 and put the Piece K on that. Make the spacer to keep the Group 5 have the same gap.

Group 5

BIKE FIX

Piece K

ASSEMBLY Group 5 + K

Back Frame

Use: Back Frame Piece need: Group5,K Note: Laydown the Group 5 and put the Piece K on that. Make the spacer to keep the Group 5 have the same gap.

Piece K

Group 5

BIKE FIX 15

ASSEMBLY

5'-4 1/2"

1'-4 1/2"

2'-8

4'-3 1/2"

3'-6 1/2"

3'-2"

Size information

Back Frame

3'-4 3/4"

BIKE FIX

ASSEMBLY

Back Frame

1'-4 1/2"

3'-6 1/2" 5'-4 1/2"

Size information

1'-4"

BIKE FIX 17

ASSEMBLY Group 5 + K + Q

Back Frame

Use: Back Frame Piece need: Group 5,K,Q

Group 5

Piece Q

Piece K

Piece Q

BIKE FIX

ASSEMBLY Back Frame + Bench

BIKE FIX

BIKE FIX 19

ASSEMBLY

BIKE FIX Back Frame, Bench + Table

BIKE FIX

ASSEMBLY

BIKE FIX

BIKE FIX 21

PIECE: A Use: Table Count: 6 Materials + Directions: 2”x6” lumber Cut 6 pieces of 2”x6” lumber, Rounded edges

8'-0" 5 1/2" 22

Plan NOT TO SCALE

SHOP DRAWING BIKE FIX

1 1/2"

3 1/2"

1 1/2"

5 1/2"

Section NOT TO SCALE 26

PIECE: B

Plan NOT TO SCALE 27

3 1/2"

1 1/2"

5 1/2"

1 1/2"

2'-8"

3 1/2"

Use: Table Count: 4 Materials + Directions: 2”x4” lumber Cut 4 pieces of 2”x4” lumber, Rounded edges

Section NOT TO SCALE BIKE FIX 23

PIECE: C Use: Table Count: 3 Materials + Directions: 2”x4” lumber Cut 3 pieces of 2”x4” lumber, Rounded edges

Plan NOT TO SCALE 24

BIKE FIX

3 1/2"

1 1/2"

5 1/2"

1 1/2"

3 1/2"

3'-0 1/2"

Section NOT TO SCALE 28

PIECE: D

1'-3 1/2" 3 1/2" 3 1/2" 1'-10 1/2"

Plan NOT TO SCALE 29

3 1/2"

1 1/2"

5 1/2"

1 1/2"

3 1/2"

Use: Table Count: 2 Materials + Directions: 2”x4” lumber Cut 2 pieces of 2”x4” lumber, Cut the angle for both sides, Rounded edges

Section NOT TO SCALE BIKE FIX 25

PIECE: E Use: Table Count: 2 Materials + Directions: 2”x4” lumber Cut 2 pieces of 2”x4” lumber, Rounded edges

2'-7"

3 1/2"

Plan NOT TO SCALE 26

BIKE FIX

1 1/2"

3 1/2"

1 1/2"

5 1/2"

Section NOT TO SCALE 30

PIECE: F Use: Table Count: 2 Materials + Directions: 2”x4” lumber Cut 2 pieces of 2”x4” lumber, Cut the angle for both sides, Rounded edges

/4"

21 0"

3'-

/4"

3'-

Plan NOT TO SCALE 31

3 1/2"

1 1/2"

5 1/2"

1 1/2"

/2"

Section NOT TO SCALE BIKE FIX 27

PIECE: G Use: Table Count: 2 Materials + Directions: 2”x4” lumber Cut 2 pieces of 2”x4” lumber, Rounded edges

4'-7" 1 1/2"

3 1/2"

1 1/2"

5 1/2"

3 1/2" Plan NOT TO SCALE 28

BIKE FIX

Section NOT TO SCALE 32

PIECE: H Use: Bench Count: 4 Materials + Directions: 2”x6” lumber Cut 2 pieces of 2”x6” lumber, Rounded edges

9'-0" 5 1/2" 33

Plan NOT TO SCALE

1 1/2"

3 1/2"

1 1/2"

5 1/2"

Section NOT TO SCALE BIKE FIX 29

PIECE: I

Plan NOT TO SCALE 30 BIKE FIX

3 1/2"

1 1/2"

5 1/2"

1 1/2"

2'-2"

3 1/2"

Use: Bench Count: 4 Materials + Directions: 2”x4” lumber Cut 4 pieces of 2”x4” lumber, Rounded edges

Section NOT TO SCALE 34

PIECE: J

1'-10"

Use: Bench Count: 8 Materials + Directions: 2”x4” lumber Cut 8 pieces of 2”x4” lumber, Rounded edges

Plan NOT TO SCALE 35

1 1/2"

3 1/2"

1 1/2"

5 1/2"

Section NOT TO SCALE BIKE FIX 31

PIECE: K Use: Back Frame Count: 6 Materials + Directions: 2”x6” lumber Cut 6 pieces of 2”x6” lumber, Rounded edges

9'-0"

3 1/2" 32

BIKE FIX

Plan NOT TO SCALE

1 1/2"

3 1/2"

1 1/2"

5 1/2"

Section NOT TO SCALE 36

PIECE: L Use: Back Frame Count: 12 Materials + Directions: 2”x4” lumber Cut 12 pieces of 2”x4” lumber, Cut the angle for the bottom side Rounded edges

3 1/

9'-0

1 1/

Plan NOT TO SCALE

1 1/2"

3 1/2"

1 1/2"

5 1/2"

Section NOT TO SCALE BIKE FIX 33

PIECE: M Use: Back Frame Count: 12 Materials + Directions: 2”x4” lumber Cut 12 pieces of 2”x4” lumber, Rounded edges

8'-0" 3 1/2" 34

BIKE FIX

Plan NOT TO SCALE

1 1/2"

3 1/2"

1 1/2"

5 1/2"

Section NOT TO SCALE 38

PIECE: N Use: Back Frame Count: 6 Materials + Directions: 2”x4” lumber Cut 6 pieces of 2”x4” lumber, Rounded edges

4'-8"

3 1/2"

Plan NOT TO SCALE 39

1 1/2"

3 1/2"

1 1/2"

5 1/2"

Section NOT TO SCALE BIKE FIX 35

PIECE: O Use: Back Frame Count: 6 Materials + Directions: 2”x4” lumber Cut 6 pieces of 2”x4” lumber, Rounded edges

4'-10"

3 1/2"

Plan NOT TO SCALE 36 BIKE FIX

1 1/2"

3 1/2"

1 1/2"

5 1/2"

Section NOT TO SCALE 40

PIECE: P Use: Back Frame, Bench Count: 13 Materials + Directions: 2”x4” lumber Cut 13 pieces of 2”x4” lumber,

2 of the back frame do not need the spacer cause of the table pulg in. 1 of the bench leg do not need the spacer cause of the table pulg in.

3 1/2"

Plan NOT TO SCALE

1 1/2"

3 1/2"

Section NOT TO SCALE 41

BIKE FIX 37

PIECE: Q

Plan NOT TO SCALE 38 BIKE FIX

3 1/2"

1 1/2"

5 1/2"

1 1/2"

1'-2"

3 1/2"

8 1/2"

3 1/2"

Use: Back Frame Count: 6 Materials + Directions: 2”x4” lumber Cut 6 pieces of 2”x4” lumber, Cut the angle Rounded edges

Section NOT TO SCALE 42

Photos On Site

PROJECT 2 Sweet-Basket Stand Lowcountry Farm Stand

9' - 0"

4' - 0"

8' - 8 9/32"

7' - 10"

12' - 3 1/16"

12' - 0"

16' - 8 7/16"

Kiawah River Just 15 miles from Charleston and across the river from Kiawah Island, a farm stand and greenhouse greet your arrival. Kiawah Riverâ&#x20AC;&#x2122;s maritime forests and riverfront are wellsuited for tree houses and bay boats. Cottages are painted in a wash of white. Paths lacing out toward the oyster beds and the saltwater river are remarkably unspoiled. Here, shared greenspaces and trails through the palmetto and oak tree scenery are a gift to everyone who will live and gather at Kiawah River. Farmer Stand The project we did at Kiawah River is a Farmer Stand. It is not only a farm stand and also a sign in the entry. It will be designed and installed in different phase flowing the whole Kiawah River project. The client wants the building to be a â&#x20AC;&#x153;billboardâ&#x20AC;? that is the sign for their project. The local farmer will sell their products in the Farmer Stand. In the same time, the farmer stand also serves the people who live here. After the project finished in the Kiawah River, the building will duplicate and put in different location. It will be the trailhead, community pavilion... Design process There are nine persons in the studio. We try to give more options to the client that the design is from nine different prototypes. After the first review, the design will be narrow down to three prototypes. And then the design will become the one.

PROTOTYPE1 (Individual Design)

Side Elevation

The first prototype is the individual design. The concept is the movable building. The wood structure is seating on the steel frames. The wheels provide the potential to move the building. The wood structure is designed more flexible. The wall is inside of the structure that can provide more surface for the framers.

PROTOTYPE 1

(Individual Design)

Plan Diagram

PROTOTYPE1

(Individual Design)

Elevation Diagram

Section Diagram

PROTOTYPE 2

(Three Person Group)

The second prototype is group work. We combine three different ideas and make a new one. That explores the more open space. Other groups are more design for the closed, locked space. Group members: Yibo Zeng Katie Kowalski Rachel Crane

PROTOTYPE 2

(Three Person Group)

Plan Diagram

Elevation 53

PROTOTYPE 2

(Three Person Group)

Program Diagram

PROTOTYPE 2

(Three Person Group)

PROTOTYPE 2

(Three Person Group)

PROTOTYPE 3

(Nine Person Group)

KIAWAH RIVER FARMSTEAD

Group members: 2'-6"

Yibo Zeng Katie Kowalski Rachel Crane Cameron McRae Stevie Chen Linette Gteen Jeremy Tetreault Rushabh Patel Edward Moore

HEIGHT

8'-6"

6' 5'-5"

4'-10"

1'-2"

1'-6"

2'-8" 8'

1'-6"

VERTICAL ACTIVITY ZONING

The final design is more based on client ideas. The building should have doors that can be locked by the users. They can leave their products in the building. The building is designed on Modular that can easy to replace, duplicate and fix. We use wood and steel to make the building that gives the contrast on the site. 7'-9" 7' 9"

'-1" 1 7'-1"

5'-10" 5' 5 -10 10"

5'-9" 5'-1" 4'-3"

1'-2"

HEIGHTS OF EYESIGHT LEVEL

MAXIMUM HEIGHTS OF HAND REACH MAXIMUM HEIGHTS OF HAND REACH

7'-9"

EYESIGHT

HAND REACH

Yibo&Dave (Male Dimension)

6’

69”

93”

Rachel(Female Dimension)

5’5”

61”

85”

Steive (Girl Dimension)

4’10”

52”

70”

PROTOTYPE 3

(Nine Person Group)

Program Diagram

PROTOTYPE 3

(Nine Person Group)

1 2 4

2x4 FRAMING

(2) 2x6 TOP PLAT

BLOCKING TO FI

(

Built Diagram

PROTOTYPE 3

(Nine Person Group)

D | CONSTRUCTION METHODS MAIN RAFTER AT HIP CONNECTION

TYPICAL RAFTER TO TOP PLATE 2x6 RAFTER

APEX BLOCK

BOLT/SCREW TOP OF TRUSS

BOLT/SCREW 2x6 MAIN RAFTER

6x6 POST

3 ROOF PANEL DIAGRAMS 1x2 PURLINS FOR DECKING ATTACHMENT, TYP.

4 METAL DECKING PER MANUFACTURER

ROOF PANELS TO MAIN RAFTERS

BOLT/SCREW

2x6 RAFTER

2x4 FRAMING (2) 2x6 TOP PLATES

2x4 PANEL RAFTER

BLOCKING TO FIT

6 SECTION AT DOOR HINGE

5 TRUSS LAYOUT (2) 2x6 TOP PLATES

CANOPY SCROLL L2x2x1/8

6x6 POST 2x4 TRUSS MEMBERS, TYP.

BACK SIDE

7 DOOR PLANS AND ELEVATIONS

FRONT SIDE

8 COLUMN AT FOUNDATION 6x6 POST

1/2” DIA GALV. BOLT PIN CAPS

EXISTING SOIL

PLAN

BACK ELEVATION

FRONT ELEVATION

PROTOTYPE 3

(Nine Person Group)

1 A109 12

0' - 0 3/8"

0' - 3" 8' - 6 1/4"

Elevation

ELEVATION 1 1/2" = 1'-0" 61

7' - 10 7/8"

7' - 7 1/2"

8' - 6 17/32"

8' - 0 7/8"

2' - 1 1/2"

PROTOTYPE 3

(Nine Person Group)

TURE

3' - 0 15/32"

7' - 10 7/8"

- 1 1/2"

2 No.

SECTION 1/2" = 1'-0" Description

DIAMOND PIER FOUNDATION UNDERGROUN

Section Date

ELEVATION & SECTION Project number

Project Number

(Nine Person Group)

DOOR 6" = 1

0' - 4 3/16"

0' - 1"

Single Door Interior Elevation

SINGLE DOOR INTERIOR FRAME ELEVATION 2 3/4" = 1'-0"

No.

KIAWAH RIVER

0' - 1 1/2"

0' - 1"

1' - 9 7/8" 2' - 6 5/8"

1' - 9 7/8" 1' - 0 15/16"

5' - 5 7/16"

4' - 8 11/16"

0' - 11" 0' - 5"

3 2" X 2" X 1/8" STEEL ANGLE

3' - 9 1/8"

SINGLE DOOR EXTERIOR ELEVATION 1 3/4" = 1'-0"

0' - 1"

2' - 6 5/8" 7' - 3 1/2"

1' - 9 7/8"

0' - 8 3/4"

0' - 5"

WOOD BLOCKING

Single Door Exterior Elevation

0' - 3 1/2"

2' - 2 1/16"

1' - 0 15/16"

0' - 3 1/2"

0' - 5" 0' - 7" 2' - 5 1/4"

3/4" X 3 1/2" WOOD SLATS (21)

2' - 5 1/4"

7' - 7 1/2"

0' - 4 3/16"

3' - 8 5/8"

1' - 9 7/8"

PROTOTYPE 3

CLEMSON ARCHITECTURE CENTER

DOOR 6" = 1

Des

PROTOTYPE 3

(Nine Person Group)

0' - 4 3/16"

0' - 1 1/2"

0' - 1"

3/4" X 3 1/2" WOOD SLATS. FASTEN TO WOOD BLOCKING WITH 1 1/4" SCREW 1" FROM EDGE OF SLAT. (6) PER SLAT 1" X 1 3/4" WOOD BLOCKING. FASTEN TO STEEL ANGLE WITH 1/4" X 1 1/4" CARRIAGE BOLT (PRE-DRILL HOLES IN STEEL ANGLE 1" FROM EDGE)

0' - 1"

DOOR DETAIL ELEVATION 6" = 1'-0"

2" X 2" X 1/8" STEEL ANGLE

LINE HINGE WITH POST SURFACE

2' - 6 5/8"

2" X 2" X 1/8" STEEL ANGLE 0' - 1"

0' - 4 3/16"

0' - 1"

No.

1" X 1 3/4" WOOD BLOCKING. FASTEN TO STEEL ANGLE WITH 1/4" X 1 1/4" CARRIAGE BOLT IN BETWEEN SLATS 2' O.C. (PREDRILL HOLES IN STEEL ANGLE 1" FROM EDGE) 3/4" X 3 1/2" WOOD SLATS. FASTEN TO WOOD BLOCKING WITH 1 1/4" SCREW 1" FROM EDGE OF SLAT. (6) PER SLAT

DOOR DETAIL PLAN 6" = 1'-0"

Description

WELD FLUSH

SLAT DOOR

5" X 5" X 3/8" SURFACE-MOUNT HINGE. WELD TO STEEL DOOR FRAME, FASTEN TO WOOD COLUMN WITH 1 1/4" SCREWS (4) PER HINGE. (3) HINGES PER DOOR

Date

5 1/2" X 5 1/2" WOOD COLUMN

HINGE CONNECTIONS 6" = 1'-0"

ENLARGED DOOR

45 PM

0' - 3 1/2"

1' - 9 7/8"

1' - 0 15/16"

2" X 2" X 1/8" STEEL ANGLE

Photos on site

(Nine Person Group)

Photos on site

(Nine Person Group)

Photos on site

(Nine Person Group)

Photos on site

(Nine Person Group)

PROJECT 3 BOX

Thinking by Hand

Thinking Hands Build up the thinking hands. One of the architecture design theory is touching and feeling the building. It is the architecture detail design. How to design the touchable detail that will be thinking through the hands. In traditional design way, the design is going through peopleâ&#x20AC;&#x2122;s mind and show up on the drawing. But the more critical way is design and thinking by hand. The tolerance under 1/16â&#x20AC;? is small in architecture design but is important for touching detail. The hands will notice that tolerance. The only way to design the touchable detail is thinking through the designersâ&#x20AC;&#x2122; hands. Box The box is thinking through all the details and materials Material 1: White Oak Material 2: Sapele

BOX

High-End Hand Craft

BOX

High-End Hand Craft

BOX

High-End Hand Craft

BOX

High-End Hand Craft

BOX

High-End Hand Craft

BOX

High-End Hand Craft

BOX

High-End Hand Craft

BOX

High-End Hand Craft

YIBO ZENG YIBOZ@CLEMSON.EDU