Yamaha outboard 50hwhd service repair manual l 850194 by 1630861

WORLD WIDE

40V, 50H USA/CANADA

40W, 50W SERVICE MANUAL LIT-18616-01-81

290320

E A20000-0

NOTICE This manual has been prepared by the Yamaha Motor Company primarily for use by Yamaha dealers and their trained mechanics when performing maintenance procedures and repairs to Yamaha equipment. It has been written to suit the needs of persons who have a basic understanding of the mechanical and electrical concepts and procedures inherent in the work, for without such knowledge attempted repairs or service to the equipment could render it unsafe or unfit for use. Because the Yamaha Motor Company Ltd. has a policy of continuously improving its products, models may differ in detail from the descriptions and illustrations given in this publication. Use only the latest edition of this manual. Authorized Yamaha dealers are notified periodically of modifications and significant changes in specifications and procedures, and these are incorporated in successive editions of this manual.

A10001-0*

40V/50H SERVICE MANUAL ď&#x203A;&#x2122;1997 Yamaha Motor Corporation, USA 1st Edition, August 1997 All rights reserved. No part of this publication may be reproduced or transmitted in any form or by any means including photocopying and recording without the written permission of the copyright holder. Such written permission must also be obtained before any part of this publication is stored in a retrieval system of any nature. Printed in U.S.A. LIT-18616-01-81

HOW TO USE THIS MANUAL MANUAL FORMAT All of the procedures in this manual are organized in a sequential, step-by-step format. The information has been complied to provide the mechanic with an easy to read, handy reference that contains comprehensive explanations of all disassembly, repair, assembly, and inspection operations. In this revised format, the condition of a faulty component will precede an arrow symbol and the course of action required will follow the symbol, e.g., ● Bearings Pitting/Damage → Replace. To assist you to find your way about this manual, the Section Title and Major Heading is given at the head of every page. An Index to contents is provided on the first page of each Section.

MODEL INDICATION Multiple models are shown in this manual. These indications are noted as follows. Model name

40VMH

40VMHD

40VMHO

40VMO

USA and CANADA name

C40MH

Indication

40VMH

40VMHD

40VMHO

40VMO

Model name

40VETO

50HMHO

50HMHD

50HMO

USA and CANADA name

40TR

Indication

40VETO

40VWH

40VE

40VEO

40VEHTO

40VET

C40ER

40ER

P40TH

C40TR

40VWH

40VE

40VEO

40VEHTO

40VET

50HMDO

50HWHD

50HEDO

50HET

50HETO

50ER

C50TR

50TR

50HEDO

50HET

50HETO

40MH

50HMHO

50HMHD

50HMO

50HMDO

50HWHD

THE ILLUSTRATIONS Some illustrations in this manual may differ from the model you have. This is because a procedure described may relate to several models, though only one may be illustrated. (The name of model described will be mentioned in the description).

REFERENCES These have been kept to a minimum; however, when you are referred to another section of the manual, you are told the page number to go to.

WARNINGS, CAUTIONS AND NOTES Attention is drawn to the various Warnings, Cautions and Notes which distinguish important information in this manual in the following ways. The Safety Alert Symbol means ATTENTION! BECOME ALERT! YOUR SAFETY IS INVOLVED!

WARNING Failure to follow WARNING instructions could result in severe injury or death to the machine operator, a bystander, or a person inspecting or repairing the outboard motor.

CAUTION: A CAUTION indicates special precautions that must be taken to avoid damage to the outboard motor.

NOTE: A NOTE provides key information to make procedures easier or clearer.

SPECIFICATIONS These are given in bold type at each procedure. It is not necessary to leave the section dealing with the procedure in order to look up the specifications. It is important to note the differences in specifications of models. When a procedure relates to more than one model, the main differences in specifications will be shown in a following table. Model name

40VMH

40VMHD

40VMHO

40VMO

40VWH

40VE

40VEO

40VEHTO

40VET

Starting system

Manual

Manual & Electric

Electric

Control system

Tiller

Remote

Tiller

Remote

Tiller

Remote

PTT

Trim/Tilt system Lubrication system

Manual tilt Hydro tilt Manual tilt Manual tilt Hydro tilt Manual tilt Manual tilt Pre-Mixed Pre-Mixed

Oil injection Oil injection

Pre-Mixed Pre-Mixed Oil injection Oil injection Pre-Mixed

Warning indicator lamp

—

Enrichment system

Choke

Prime Start

Model name

40VETO

50HMHO

50HMHD

50HMO

50HMDO

50HWHD

50HEDO

50HET

50HETO

Starting system

Electric

Manual

Manual & Electric

Electric

Control system

Remote

Tiller

Remote

Tiller

Remote

Trim/Tilt system

PTT

Hydro tilt

PTT

Lubrication system

Manual tilt Hydro tilt Manual tilt Hydro tilt

Oil injection Oil injection Pre-Mixed Oil injection Oil injection Pre-Mixed Oil injection Oil injection Oil injection

Warning indicator lamp

—

Enrichment system

Prime Start

Choke

Prime Start

HOW TO READ DESCRIPTIONS 1. A disassembly installation job mainly consists of the exploded diagram 1. 2. The numerical figures represented by the number 2 indicates the order of the job steps. 3. The symbols represented by the number 3 indicates the contents and notes of the job. For the meanings of the symbols, refer to the next page(s). 4. The REMOVAL AND INSTALLATION CHART 4 is attached to the exploded diagram and explains the job steps, part names, notes for the jobs, etc. 5. The SERVICE POINTS, other than the exploded diagram, explains in detail the items difficult to explain in the exploded diagram or REMOVAL AND INSTALLATION CHART, the Service points requiring the detailed description 5, etc.

E 1

A50001-1-4

GEN INFO

SYMBOLS Symbols 1 to 9 are designed as thumbtabs to indicate the content of a chapter.

SPEC

1 2 3 4 5 6 7 8 9

INSP ADJ

FUEL

LOWR

POWR 7

General Information Specifications Periodic Inspection and Adjustment Fuel System Power Unit Lower Unit Bracket Unit Electrical System Trouble-analysis

BRKT

–

ELEC

Symbols 0 to F indicate specific data:

0 A B C D E F

TRBL ANLS B

Special tool Specified liquid Specified grease Specified engine speed Specified torque Specified measurement Specified electrical value [Resistance (Ω), Voltage (V), Electric current (A)]

Symbol G to J in an exploded diagram indicate grade of lubricant and location of lubrication point: G

E I

J A

M K

L GM

271

N LT

242

572

G H I J

Apply Yamaha 2-stroke outboard motor oil Apply Yamaha gear-case lubricant Apply molybdenum disulfide oil Apply water resistant grease (Yamaha grease A, Yamaha marine grease)

Symbols K to N in an exploded diagram indicate grade of sealing or locking agent, and location of application point: K L M N

Apply Gasket maker Apply LOCTITE No. 271 (Red LOCTITE) Apply LOCTITE No. 242 (Blue LOCTITE) Apply LOCTITE No. 572

NOTE: In this manual, the above symbols may not be used in every case.

E A30000-0

INDEX

GENERAL INFORMATION SPECIFICATIONS PERIODIC INSPECTION AND ADJUSTMENT FUEL SYSTEM POWER UNIT LOWER UNIT BRACKET UNIT

GEN INFO

SPEC

INSP ADJ

FUEL

POWR

LOWER

BRKT â&#x20AC;&#x201C;

ELECTRICAL SYSTEM TROUBLE-ANALYSIS

ELEC

TRBL ANLS

1 2 3 4 5 6 7 8 9

GEN INFO

CHAPTER 1 GENERAL INFORMATION IDENTIFICATION............................................................................................. 1-1 SERIAL NUMBER ..................................................................................... 1-1 STARTING SERIAL NUMBERS ............................................................... 1-1 SAFETY WHILE WORKING ............................................................................ 1-2 FIRE PREVENTION ................................................................................... 1-2 VENTILATION........................................................................................... 1-2 SELF-PROTECTION.................................................................................. 1-2 OILS, GREASES AND SEALING FLUIDS................................................ 1-2 GOOD WORKING PRACTICES ................................................................ 1-3 DISASSEMBLY AND ASSEMBLY ........................................................... 1-4 SPECIAL TOOLS ............................................................................................. 1-5 MEASURING ............................................................................................ 1-6 REMOVAL AND INSTALLATION ............................................................ 1-8

1 2 3 4 5 6 7 8 9

GEN INFO

IDENTIFICATION

E A60000-1*

IDENTIFICATION SERIAL NUMBER The serial number of the outboard motor is stamped on a plate attached to the port side of the clamp bracket. NOTE: As an antitheft measure, a special label on which the outboard motor serial number is stamped is bonded to the portside of the clamp bracket. The label is specially treated so that peeling it off causes cracks across the serial number. 1 2 3 4

Model name Approved model No. Transom height Serial number

STARTING SERIAL NUMBERS The starting serial number blocks are as follows: Model Worldwide 40VMH

USA, CANADA

Starting serial No.

6H4

S: 010262 ~ L: 310801 ~ L: 560290 ~ S: 191877 ~ L: 491566 ~ S: 290284 ~ L: 860312 ~ L: 510116 ~ S: 060285 ~ L: 360173 ~ S: 110760 ~ L: 842362 ~ X: 740146 ~ L: 430386 ~ L: 921505 ~ S: 880367 ~ L: 544974 ~ X: 900196 ~

C40MH

40VMHD

—

40VMHO

40MH

40VMO

—

40VWH

—

40VE

C40ER

40VEO

40ER

40VEHTO 40VET

P40TH C40TR

40VETO

40TR

Model

Approved model code

Worldwide 50HMHO 50HMHD 50HMO 50HMDO 50HWHD

USA, CANADA — — — — —

50HEDO

50ER

50HET

C50TR

50HETO

50TR

1-1

Approved model code

Starting serial No.

6H5

S: 190662 ~ L: 310380 ~ S: 260189 ~ L: 560258 ~ L: 850194 ~ S: 090431 ~ L: 521079 ~ L: 900101 ~ S: 210142 ~ L: 444058 ~ X: 750216 ~

GEN INFO

SAFETY WHILE WORKING

SAFETY WHILE WORKING The procedures given in this manual are those recommended by Yamaha to be followed by Yamaha dealers and their mechanics.

FIRE PREVENTION Gasoline (petrol) is highly flammable. Petroleum vapor is explosive if ignited. Do not smoke while handling, and keep it away from heat, sparks, and open flames.

VENTILATION Petroleum vapor is heavier than air and is deadly if inhaled in large quantities. Engine exhaust gases are harmful to breathe. When test-running an engine indoors, maintain good ventilation.

SELF-PROTECTION Protect your eyes with suitable safety glasses or safety goggles when using compressed air, when grinding or when doing any operation which may cause particles to fly off. Protect hands and feet by wearing safety gloves or protective shoes if appropriate to the work you are doing.

OILS, GREASES AND SEALING FLUIDS Use only genuine Yamaha oils, greases and sealing fluids or those recommended by Yamaha.

1-2

GEN INFO

SAFETY WHILE WORKING

Under normal conditions of use, there should be no hazards from the use of the lubricants mentioned in this manual, but safety is all-important, and by adopting good safety practices, any risk is minimized. A summary of the most important precautions is as follows: 1. While working, maintain good standards of personal and industrial hygiene. 2. Clothing which has become contaminated with lubricants should be changed as soon as practicable, and laundered before further use. 3. Avoid skin contact with lubricants; do not, for example, place a soiled wipingrag in one’s pocket. 4. Hands and any other part of the body which have been in contact with lubricants or lubricant-contaminated clothing, should be thoroughly washed with hot water and soap as soon as practicable. 5. To protect the skin, the application of a suitable barrier cream to the hands before working is recommended. 6. A supply of clean lint-free cloths should be available for wiping purposes.

GOOD WORKING PRACTICES 1. The right tools Use the special tools that are advised to protect parts from damage. Use the right tool in the right manner — don’t improvise. 2. Tightening torque Follow the torque tightening instructions. When tightening bolts, nuts and screws, tighten the large sizes first, and tighten inner-positioned fixings before outer-positioned ones.

1-3

GEN INFO

SAFETY WHILE WORKING

3. Non-reusable items Always use new gaskets, packings, Orings, split-pins and circlips etc. on reassembly.

DISASSEMBLY AND ASSEMBLY 1. Clean parts with compressed-air on disassembling them. 2. Oil the contact surfaces of moving parts on assembly.

3. After assembly, check that moving parts operate normally.

4. Install bearings with the manufacturerâ&#x20AC;&#x2122;s markings on the side exposed to view, and liberally oil the bearings. 5. When installing oil seals, apply a light coating of water-resistant grease to the outside diameter.

1-4

GEN INFO

SPECIAL TOOLS

A80000-0*

SPECIAL TOOLS The use of correct special tools recommended by Yamaha will aid the work and enable accurate assembly and tune-up. Improvisations and use of improper tools can cause damage to the equipment. NOTE: ● For U.S.A. and Canada, use part number starting with “YB-”, “YU-” or “YW-”. ● For others, use part number starting with “90890-”.

1-5

GEN INFO

SPECIAL TOOLS

MEASURING Tool name 1 2 3 4 5 6 7 8 9 10 11

Tachometer Dynamic spark tester C.D.I. tester Mity Vac Pressure tester Dial indicator Backlash indicator Magnetic flexible stand Backlash adjusting plate Thickness gauge Pinion height gauge

Digital caliper

13 14 15 16 17 18 19 20 21 22 23 24

Gauge block Adapter plate Gauge base Clamp Shimming plate Base plate Compression spring Press plate Gauge pin Digital multimeter Pocket tester Spins test harness

Tool No. Except for USA and USA and Canada a Canada b YU-08036-A 90890-06760 YM-34487 90890-06754 YU-91022-B N.A. YB-35956 90890-06756 YB-35956 90890-06762 YU-03097 90890-01252 YB-06265 90890-06706 YU-34481 90890-06705 YB-07003 N.A. YU-26900-9 N.A. N.A. 90890-06702 N.A.

90890-06704

YB-34432-9 YB-34432-10 YB-34432-11 YB-34432-17 N.A. YB-34446-1 YB-34446-3 YB-34446-4 YB-34446-7 YU-34899-A YU-03112 YB-06757

N.A. N.A. N.A. N.A. 90890-06701 N.A. N.A. N.A. N.A. 90890-06752 90890-03112 90890-06757

1-6

Use for: Idle speed Ignition system Ignition system Fuel joint Lower case Backlash Backlash Backlash Backlash Shimming Pinion shimming Pinion Forward shimming shimming Pinion shimming Pinion shimming Pinion shimming Pinion shimming Forward shimming Forward shimming Forward shimming Forward shimming Forward shimming Electrical Electrical Peak voltage measurement

GEN INFO

SPECIAL TOOLS

1-7

GEN INFO

SPECIAL TOOLS

REMOVAL AND INSTALLATION Tool name

Small end bearing needle installer

Tool No. Except for USA and USA and Canada a Canada b YB-06106

90890-06526

Bearing separator

YB-06219

90890-06534

3 4

Flywheel holder Flywheel puller

YB-06139 YB-06117

90890-06522 90890-06521

Stopper guide plate

N.A.

90890-06501

6 7 8 9

Bearing housing puller Center bolt Universal puller Oil seal installer

YB-06234 N.A. YB-06117 YB-06168

90890-06503 90890-06504 N.A. N.A.

Needle bearing remover

YB-06112

90890-06614

Needle bearing installer

YB-06111

90890-06614

Bearing outer race puller clow

N.A.

90890-06535

Use for:

Small end Reverse gear bearing Crank shaft Forward bearing gear inner bearing Flywheel Flywheel Reverse gear bearing Propeller shaft housing Drive shaft outer bearing Propeller shaft housing Propeller shaft housing Propeller shaft housing Propeller shaft oil seal Propeller shaft needle bearing Propeller shaft needle bearing Reverse gear bearing

Stopper guide stand

Slide hammer set

YB-06096

15 16 17

Pinion nut wrench Socket adapter Drive shaft holder Needle bearing attachment Drive shaft needle bearing depth stop Bearing installer Bearing installer Bearing installer

N.A. N.A. YB-06079

Forward Reverse gear 90890-06538 gear outer bearing bearing Drive shaft outer bearing Reverse gear N.A. Forward bearing gear outer bearing 90890-06505 Pinion nut 90890-06506 Pinion nut 90890-06517 Pinion nut

YB-06063

90890-06614

Drive shaft needle bearing

YB-34473

N.A.

Drive shaft needle bearing

YB-06167 YB-06110 YB-06270-A

90890-06628 90890-06627 90890-06640

Drive shaft oil seal Drive shaft outer bearing Forward gear inner bearing

18 19 20 21 22

N.A.

1-8

GEN INFO

SPECIAL TOOLS

1-9

GEN INFO

SPECIAL TOOLS

Tool name 23

Tool No. Except for USA and USA and Canada a Canada b N.A. 90890-06523

25 26 27

Bearing outer race puller Bearing outer race puller clow Bearing installer Shift rod wrench Tilt cylinder wrench

Bearing depth plate

N.A.

90890-06603

Driver rod - SL

N.A.

90890-06602

Driver rod - SS

N.A.

90890-06604

31 32 33

Driver rod - L Driver rod - S Driver rod - M10

YB-06071 N.A. N.A.

90890-06605 90890-06606 90890-06652

N.A.

Use for: Forward gear outer bearing

90890-06532

Forward gear outer bearing

YB-41446 90890-06626 YB-06052 N.A. YB-06175-2B 90890-06544

Forward gear outer bearing Shift rod PTT Propeller Drive shaft shaft needle needle bearbearing ing Drive shaft needle bearing Propeller shaft needle bearing Bearing and oil seal Bearing and oil seal Bearing and oil seal

1-10

SPEC

CHAPTER 2 SPECIFICATIONS GENERAL SPECIFICATIONS .......................................................................... 2-1 MAINTENANCE SPECIFICATIONS................................................................ 2-7 ENGINE..................................................................................................... 2-7 LOWER...................................................................................................... 2-9 ELECTRICAL ........................................................................................... 2-10 DIMENSION 1......................................................................................... 2-13 DIMENSION 2......................................................................................... 2-15 TIGHTENING TORQUE................................................................................. 2-17 SPECIFIED TORQUE .............................................................................. 2-17 GENERAL TORQUE ............................................................................... 2-18

1 2 3 4 5 6 7 8 9

SPEC

GENERAL SPECIFICATIONS

GENERAL SPECIFICATIONS Item

Model Unit

Worldwide USA, CANADA

DIMENSION: Over-all length Over-all width Over-all height

40VMH C40MH

40VMHD — 1,281 (50.4)

mm (in)

40VMO —

40VWH —

670 (26.4)

1,281 (50.4)

349 (13.7)

mm (in)

S L X

40VMHO 40MH

1,223 (48.1)

360 (14.2)

—

1,223 (48.1)

mm (in)

1,350 (53.1)

mm (in)

—

Boat transom height S L X WEIGHT: (with aluminum propeller) S L X PERFORMANCE: Output (ISO) Full throttle operating range Maximum fuel consumption ENGINE: Type Number of cylinder Total displacement Bore × Stroke Compression ratio Number of carburetor Intake system Scavenging system Control system Starting system Ignition system Alternator output Enrichment system Advance type Spark plug (NGK) For CANADA and Europe Exhaust system Cooling system Lubrication system

mm (in)

381 (15.0)

—

381 (15.0)

mm (in)

508 (20.0)

mm (in)

—

381 (15.0)

—

kg (lb)

74 (163)

—

75.8 (167)

71.5 (158)

—

kg (lb)

76.5 (169)

84 (185.2)

77.5 (171)

74 (163)

81.5 (179.7)

kg (lb)

—

kW (hp)/rpm

29.4 (40)/5,000

rpm

4,500 ~ 5,500

L (US gal, Imp gal)/ h at rpm

18.5 (4.9, 4.1) at 5,500

2 stroke - L 3 3

cm (cu. in)

698 (42.6)

mm (in)

67.0 × 66.0 (2.64 × 2.60) 6.00 3 Reed valve Loop charge Tiller control

Remote control

Tiller control Manual & Electric

Manual CDI 80W

12-80

80W

Choke valve

12-6A Prime start

Electric automatic B7HS-10 BR7HS-10 Through propeller boss Water Pre-mixed fuel & oil

2-1

Oil injection

Pre-mixed fuel & oil

SPEC

GENERAL SPECIFICATIONS

Item Worldwide USA, CANADA

FUEL AND LUBRICATION: Fuel type Fuel rating Engine oil type/grade Mixing ratio Engine oil tank capacity Gear oil type Gear oil quantity BRACKET: Trim/tilt system Tilt angle Tilt-up angle Trim angle Shallow water crushing angle Steering angle DRIVE UNIT: Gear shift position Gear ratio Gear type Clutch type Propeller direction Propeller drive system Propeller series mark ELECTRICAL: Battery capacity Cold cranking

Model Unit

40VMH C40MH

40VMHD —

40VMHO 40MH

40VMO —

40VWH —

Regular gasoline 1

P.O.N.*

Min. 86 2-stroke outboard motor oil / TC-W3 50 : 1

—

50 : 1

—

1.5 (1.6, 1.3)

—

L (US qt, Imp qt)

Hypoid gear oil-SAE#90 cm3 (US oz, Imp oz)

430 (14.5, 15.1)

Manual tilt degree

8, 12, 16, 20, 24

—

degree

8, 12, 16, 20, 24 66

degree at 12˚ transom

—

–4 ~ 20

—

degree

Tilt angle +18

—

Tilt angle +18

degree (left + right)

—

Tilt angle +18

40 + 40

F-N-R 1.85 (24/13) Spiral bevel gear Dog clutch Clockwise Spline G

Ah (kC)

—

70 (252)

Amps

—

380

*1: Pump Octane Number ; (Research octane + Motor octane)/2

2-2

SPEC

GENERAL SPECIFICATIONS

Item

Model Unit

Worldwide USA, CANADA

DIMENSION: Over-all length Over-all width Over-all height

40VE C40ER

40VEO 40ER

40VEHTO P40TH

40VET C40TR

40VETO 40TR

mm (in)

670 (26.4)

1,281 (50.4)

646 (25.4)

mm (in)

349 (13.7)

360 (14.2)

350 (13.8)

S L X

mm (in)

1,192 (46.9)

S L X

mm (in)

mm (in) mm (in)

—

1,192 (46.9)

—

1,433 (56.4)

—

381 (15.0)

1,319 (51.9) —

1,433 (56.4)

Boat transom height

WEIGHT: (with aluminum propeller) S L X PERFORMANCE: Output (ISO) Full throttle operating range Maximum fuel consumption ENGINE: Type Number of cylinder Total displacement Bore × Stroke Compression ratio Number of carburetor Intake system Scavenging system Control system Starting system Ignition system Alternator output Enrichment system Advance type Spark plug (NGK) For CANADA and Europe Exhaust system Cooling system Lubrication system

381 (15.0)

mm (in)

508 (20.0)

mm (in)

—

635 (25.0)

—

635 (25.0)

kg (lb)

73.5 (162)

74.5 (164)

—

85.5 (189)

kg (lb)

76 (168)

77.3 (170)

kg (lb)

—

80.5 (177)

90 (198)

87 (191.8) —

88 (194) 91.5 (201.7)

kW (hp)/rpm

29.4 (40)/5,000

rpm

4,500 ~ 5,500

L (US gal, Imp gal)/ h at rpm

18.5 (4.9, 4.1) at 5,500

2 stroke - L 3 3

cm (cu. in)

698 (42.6)

mm (in)

67.0 × 66.0 (2.64 × 2.60) 6.00 3 Reed valve Loop charge Remote control

Tiller control

Remote control

Electric CDI 6A

12-6

Pre-mixed fuel & oil

Oil injection

Prime start Electric automatic B7HS-10 BR7HS-10 Through propeller boss Water Pre-mixed fuel & oil

2-3

Oil injection

SPEC

GENERAL SPECIFICATIONS

Item Worldwide USA, CANADA

FUEL AND LUBRICATION: Fuel type Fuel rating Engine oil type/grade Mixing ratio Engine oil tank capacity Gear oil type Gear oil quantity

Model Unit

40VE C40ER

Shallow water crushing angle Steering angle DRIVE UNIT: Gear shift position Gear ratio Gear type Clutch type Propeller direction Propeller drive system Propeller series mark ELECTRICAL: Battery capacity Cold cranking

40VEHTO P40TH

40VET C40TR

40VETO 40TR

Regular gasoline 1

P.O.N.*

Min. 86 2-stroke outboard motor oil / TC-W3

L (US qt, Imp qt)

50 : 1

—

50 : 1

—

1.5 (1.6, 1.3)

—

1.5 (1.6, 1.3)

Manual tilt

Power trim/ tilt

Hypoid gear oil-SAE#90 cm3 (US oz, Imp oz)

430 (14.5, 15.1)

BRACKET: Trim/tilt system Tilt angle Tilt-up angle Trim angle

40VEO 40ER

Power trim/ tilt

Manual tilt degree

8, 12, 16, 20, 24

—

degree

degree at 12˚ transom

—

–4 ~ 20

degree

—

Tilt angle +18

degree (left + right)

— 40 + 40

F-N-R 1.85 (24/13) Spiral bevel gear Dog clutch Clockwise Spline G

Ah (kC)

70 (252)

Amps

385

*1: Pump Octane Number ; (Research octane + Motor octane)/2

2-4

380

385

SPEC

GENERAL SPECIFICATIONS

Item Worldwide USA, CANADA

DIMENSION: Over-all length Over-all width Over-all height

S L X Boat transom height S L X WEIGHT: (with aluminum propeller) S L X PERFORMANCE: Output (ISO) Full throttle operation range Maximum fuel consumption ENGINE: Type Number of cylinder Total displacement Bore × Stroke Compression ratio Number of carburetor Intake system Scavenging system Control system Starting system Ignition system Alternator output Enrichment system Advance type Spark plug (NGK) For CANADA and Europe Exhaust system Cooling system Lubrication system

Model Unit

mm (in)

50HMHO 50HMHD 50HMO 50HMDO 50HWHD 50HEDO — — — — — 50ER

1,281 (50.4)

670 (26.4)

349 (13.7)

360 (14.2)

349 (13.7)

mm (in)

1,223 (48.1)

—

1,223 (48.1)

—

mm (in)

—

1,350 (53.1)

—

1,350 (53.1)

mm (in)

670 (26.4) 360 (14.2) 1,192 (46.9)

—

mm (in)

381 (15.0)

—

381 (15.0)

mm (in)

—

508 (20.0)

—

381 (15.0)

1,192 (46.9)

1,433 (56.4)

—

381 (15.0)

508 (20.0)

—

kg (lb)

75 (165)

81.5 (180)

71.5 (158)

kg (lb)

—

84 (185)

—

kg (lb)

—

1,319 (51.9)

—

mm (in)

C50TR

1,281 (50.4)

mm (in)

50HETO 50TR

50HET

— 81.5 (180)

82 (181) 90 (198)

635 (25.0)

—

85.5 (188)

84.5 (186) 87 (191.8) 88 (194)

—

91.5 (202)

kW (hp)/rpm

36.8 (50)/5,000

rpm

4,500 ~ 5,500

L (US gal, Imp gal)/ h at rpm

22 (5.8, 4.8) at 5,500

2 stroke - L 3 cm3 (cu. in)

698 (42.6)

mm (in)

67.0 × 66.0 (2.64 × 2.60) 6.00 3 Reed valve Loop charge Tiller control

Remote control

Manual

Tiller control Manual & Electric

Remote control Electric

CDI 80W

Choke valve

Prime start Electric automatic B8HS-10 BR8HS-10 Through propeller boss Water

Oil Pre-Mixed injection fuel & Oil

2-5

Oil injection

Pre-Mixed Oil Pre-Mixed Oil fuel & Oil injection fuel & Oil injection

SPEC

GENERAL SPECIFICATIONS Item

Worldwide USA, CANADA

FUEL AND LUBRICATION: Fuel type Fuel rating Engine oil type/grade Mixing ratio Engine oil tank capacity Gear oil type Gear oil quantity

Model Unit

Tilt-up angle Trim angle Shallow water crushing angle Steering angle DRIVE UNIT: Gear shift position Gear ratio Gear type Clutch type Propeller direction Propeller drive system Propeller series mark ELECTRICAL: Battery capacity Cold cracking

50HMHO 50HMHD 50HMO 50HMDO 50HWHD 50HEDO — — — — — 50ER

50HET

C50TR

50HETO 50TR

Regular gasoline P.O.N.*1

Min. 86 2-stroke outboard motor oil / TC-W3 —

L (US qt, Imp qt)

50 : 1

1.5 (1.6, 1.3)

—

50 : 1

—

50 : 1

—

1.5 (1.6, 1.3)

—

1.5 (1.6, 1.3)

Manual tilt

Power trim/tilt

1.5 (1.6, 1.3)

Hypoid gear oil-SAE#90 3

cm (US oz, Imp oz)

BRACKET: Trim/tilt system Tilt angle

degree

430 (14.5, 15.1)

Manual Manual Hydro tilt tilt tilt 8, 12, 16, 8, 12, 16, — 20, 24 20, 24

Hydro tilt —

degree

degree at 12˚ transom

—

–4 ~ 20

—

–4 ~20

Tilt angle +18

—

degree

—

degree (left + right)

40 + 40

F-N-R 1.85 (24/13) Spiral bevel gear Dog clutch Clockwise Spline G

Ah (kC)

—

70 (252)

Amps

—

380

*1: Pump Octane Number ; (Research octane + Motor octane)/2

2-6

SPEC

MAINTENANCE SPECIFICATIONS

MAINTENANCE SPECIFICATIONS ENGINE Item CYLINDER HEAD: Warpage limit CYLINDER: Bore size Wear limit Taper limi Out of round limit PISTON: Identification mark Piston clearance Limit Diameter D Measuring point H Pin boss inside diameter Ring groove clearance (installed) top 2nd Over size piston Diameter 1st*1 2nd PISTON PIN: Diameter PISTON RING (1st): Type Dimensions (B × T) End gap (installed) Limit PISTON RING (2nd): Type Dimensions (B × T) End gap (installed) Limit CONNECTING ROD: Small end diameter CRANK SHAFT ASSEMBLY: Crank width A Crank width B Runout limit D Big end side clearance E Small end axial play limit F

Unit

Model 40 hp

50 hp

mm (in)

0.1 (0.004)

mm (in) mm (in) mm (in) mm (in)

67.00 ~ 67.02 (2.638 ~ 2.639) 67.10 (2.642) 0.08 (0.003) 0.05 (0.002)

mm (in) mm (in) mm (in) mm (in) mm (in) mm (in) mm (in) mm (in) mm (in) mm (in) mm (in) mm (in)

W 0.060 ~ 0.065 (0.0024 ~ 0.0026) 0.115 (0.0045) 66.940 ~ 67.000 (2.6354 ~ 2.6378) 10 (0.4) 18.008 ~ 18.015 (0.7090 ~ 0.7093)

mm (in)

17.995 ~ 18.000 (0.7085 ~ 0.7087)

mm (in) mm (in) mm (in) mm (in)

Keystone 2.0 × 2.6 (0.08 × 0.10) 0.40 ~ 0.60 (0.016 ~ 0.024) 0.80 (0.031)

mm (in) mm (in) mm (in) mm (in)

Keystone 2.0 × 2.6 (0.08 × 0.10) 0.40 ~ 0.60 (0.016 ~ 0.024) 0.80 (0.031)

mm (in)

22.005 ~ 22.008 (0.8663 ~ 0.8665)

mm (in) mm (in) mm (in) mm (in) mm (in)

53.90 ~ 53.95 (2.122 ~ 2.124) 32.88 ~ 33.10 (1.294 ~ 1.303) 0.03 (0.001) 0.20 ~ 0.70 (0.008 ~ 0.028) 2.0 (0.08)

*1: Except for U.S.A. 2-7

0.04 ~ 0.08 (0.002 ~ 0.003) 0.03 ~ 0.07 (0.001 ~ 0.003) 67.25 (2.648) 67.50 (2.657)

SPEC

MAINTENANCE SPECIFICATIONS Item

THERMOSTAT: Opening temperature Full-opening temperature Valve lift OIL INJECTION PUMP: Identification mark Specified discharge REED VALVE: Valve stopper height Valve bending limit CARBURETOR: Identification mark Float height Valve seat size Main jet (M.J.) Main nozzle (M.N.) Main air jet (M.A.J.) Pilot jet (P.J.) Pilot air jet (P.A.J.) Pilot screw (P.S.) Starter jet (S.J.) Electrothermal valve resistance (color — color) Idle speed RECOIL STARTER: Starter rope length

Unit

E Model

40 hp

˚C (˚F) ˚C (˚F) mm (in)

50 hp

48 ~ 52 (118 ~ 126) 60 (140) 3 (0.12) 63D00

cm (US oz, Imp oz)

1.60 ± 0.50 (0.054 ± 0.017, 0.056 ± 0.018)

mm (in) mm (in)

6.0 ± 0.2 (0.24 ± 0.01) 0.2 (0.01) (M model)

(E, W model)

(M model)

63B00 mm (in) mm (in) # mm (in) # # # turns out mm (in) Ω (color) rpm mm (in)

2-8

(E, W model)

63D00 62W00 62X00 15.0 ± 1.0 (0.59 ± 0.04) 1.2 (0.05) 115 118(M) 125 130 3.0 (0.12) 3.2 (0.13) 3.0 (0.12) 160 130 140 60 62 75 90 80 1-1/2 ± 1/4 1-5/8 ± 1/4 1-3/8 ± 1/4 — 1.0 (0.04) — 1.0 (0.04) 2.32 ~ 3.48 2.32 ~ 3.48 — — (L — B) (L — B) 800 ± 50 2,095 (82.5)

SPEC

MAINTENANCE SPECIFICATIONS

LOWER Item GEAR BACKLASH: Pinion - forward Pinion - reverse Pinion shims Forward shims Reverse shims PROPELLER: Material No. of blades × diameter × pitch

Test propeller 1 rpm Test propeller 2 rpm POWER TRIM AND TILT: Fluid type Fluid capacity Brush length Wear limit Commutator diameter Limit Commutator under cut

Unit mm (in) mm (in) mm (in) mm (in) mm (in)

r/min r/min

cm (US oz, Imp oz) mm (in) mm (in) mm (in) mm (in) mm (in)

2-9

Model 40 hp

50 hp

0.18 ~ 0.45 (0.007 ~ 0.018) 0.71 ~ 0.98 (0.028 ~ 0.039) 0.05, 0.08, 0.12, 0.30, 0.50 0.05, 0.08, 0.12, 0.30, 0.50 0.05, 0.08, 0.12, 0.30, 0.50 Aluminum 3 × 10 × 15 3 × 10-1/4 × 14 3 × 10-3/4 × 16 3 × 10-3/4 × 17 3 × 10-3/8 × 13 3 × 10-5/8 × 12 3 × 11-1/8 × 13 3 × 11-1/4 × 14 3 × 11-3/8 × 12 3 × 11-5/8 × 11 3 × 11-3/4 × 10 3 × 12-1/4 × 9 90890-01611 4,900 ~ 5,100 YB-1611 4,900 ~ 5,100

Stainless steel 3 × 10-1/4 × 14 3 × 10-1/4 × 15 3 × 10-1/4 × 16 3 × 10-5/8 × 13 3 × 11-1/4 × 14 3 × 11-1/2 × 13 3 × 12 × 11 3 × 12 × 12

90890-01611 5,250 ~ 5,450 YB-1611 5,250 ~ 5,450

ATF (Dexiron2) 434 (14.7, 15.3) 10 (0.39) 3.5 (0.14) 22 (0.87) 21 (0.83) 1.5 (0.06)

SPEC

MAINTENANCE SPECIFICATIONS

ELECTRICAL Item IGNITION TIMING: Ignition timing

(full retarded) (full advanced) (cam roller pick-up) Piston position (full advanced)

STARTER MOTOR: Type Output Brush length Wear limit Commutator diameter Limit Commutator under cut Limit Clutch type Pinion-ring gear gap Rating RECTIFIER REGURATOR: Output peak voltage (R – B) @ cranking @ 1,500 r/min @ 3,500 r/min NEUTRAL SWITCH: Length a (on) Length b (off) FUSE: Rating THERMO SWITCH (Pink lead): On temperature Off temperature THERMO SWITCH (Orange lead): On temperature Off temperature WARNING LAMP: Rating TRIM SENSOR: Resistance 1 (max) Resistance 2 (max) STATOR ASSEMBLY: Pulser coil resistance 1 Pulser coil resistance 2 Pulser coil resistance 3

Unit degree degree degree mm (in)

Model 40 hp

50 hp

A.T.D.C. 7 ± 1 B.T.D.C. 25 +3 –1 A.T.D.C. 7 B.T.D.C. 3.93 +0.97 –0.30 (0.155 +0.038 –0.012 )

mm (in) Sec.

Bendix 0.6 12.5 (0.49) 9.0 (0.35) 30.0 (1.18) 29.0 (1.14) 0.8 (0.03) 0.2 (0.01) Over running 3.0 ~ 5.0 (0.12 ~ 0.20) 30

V V V

8.5 25 25

mm (in) mm (in)

18.5 ~ 19.5 (0.73 ~ 0.77) 19.5 ~ 20.5 (0.77 ~ 0.81)

V-A

12-10

˚C (˚F) ˚C (˚F)

90 ~ 96 (194.0 ~ 204.8) 76 ~ 90 (168.0 ~ 194.0)

˚C (˚F) ˚C (˚F)

38 ~ 52 (100.4 ~ 125.6) 26 ~ 34 (78.8 ~ 93.2)

1.7

Ω (color) Ω (color)

360 ~ 540 (P — B) 800 ~ 1,200 (O — B)

Ω (color) Ω (color) Ω (color)

168 ~ 252 (W/R — B) 168 ~ 252 (W/B — B) 168 ~ 252 (W/G — B)

kW mm (in) mm (in) mm (in) mm (in) mm (in) mm (in)

2-10

SPEC

MAINTENANCE SPECIFICATIONS Item

Charge coil resistance Charging current (minimum)/rpm Charging current (maximum)/rpm Lighting voltage (minimum)/rpm Lighting voltage (maximum)/rpm Lighting coil resistance Pole number Charge coil output peak voltage (minimum) (Br – L) @ cranking @ 1,500 r/min @ 3,500 r/min Pulser coil output peak voltage (minimum) (W/R, W/B, W/G – B) @ cranking @ 1,500 r/min @ 3,500 r/min C.D.I unit output peak voltage (minimum) (B/O, B/W, B/Y – B) @ cranking @ 1,500 r/min @ 3,500 r/min Lighting coil output peak voltage (minimum) (G – G/W) @ cranking @ 1,500 r/min @ 3,500 r/min CDI UNIT: Over revolution limiter revolution limit Over heat controlled revolution IGNITION COIL: Type Primary coil resistance Secondarily coil resistance SPARK PLUG: Gap

Unit

Model

Ω (color) A/rpm A/rpm V/rpm V/rpm Ω (color)

40 hp 50 hp 368 ~ 552 (Br — L) 3/3,000 5 ~ 7/5,500 12.0/3,000 13.5 ~ 16.5/5,500 0.56 ~ 0.84 (G/W — G) 6

V V V

145 160 130

V V V

3.0 9.0 15.0

V V V

125 140 110

V V V

9.0 25 25

rpm

5,800 ~ 6,200

rpm

1,600 ~ 2,400

Ω (color) kΩ (color)

Single 0.18 ~ 0.24 (B/W — B) 2.72 ~ 3.68 (B/W — High tension cord)

mm (in)

ENGINE OIL LEVEL SENSOR: Float position lower a

mm (in)

Float position high b

mm (in)

OIL LEVEL WARNING LAMP: Rating:

V-mA 2-11

0.9 ~ 1.0 (0.035 ~ 0.039) Electric starting Manual starting model model 56.8 ~ 59.8 56.8 ~ 59.8 (2.24 ~ 2.35) (2.24 ~ 2.35) 32.8 ~ 35.8 — (1.29 ~ 1.41) 1.7-20 (Red)/ 2.2-20 (Yellow)/2.1-20 (Green)

SPEC

MAINTENANCE SPECIFICATIONS

2-12

SPEC

MAINTENANCE SPECIFICATIONS

DIMENSION 1

2-13

SPEC

MAINTENANCE SPECIFICATIONS

Model Symbol

L7 H4

H9 H12

W5 A1 A2 A3 T1

Unit

:S mm (in) :L :UL mm (in) :S mm (in) :L :UL mm (in) :S mm (in) :L :UL mm (in) degree degree degree mm (in)

40VMH 40VMHO 40VWH 50HMHO

40VMO 50HMO

40VE 40VEO

798 (31.4)

50HMDO

40VMHD 50HMHD 50HWHD

40VEHTO

40VET 40VETO 50HEDO 50HET 50HETO

—

822 (32.4)

—

822 (32.4)

—

1,040 (40.9)

910 (35.8)

937 (36.9)

—

1,010 (39.8)

433 (17.0)

401 (15.8)

408 (16.1)

—

1,040 (40.9) 418 (16.5)

—

387 (15.2)

410 (16.1)

535 (21.1)

—

410 (16.1)

—

651 (25.6)

537 (21.1)

—

649 (25.6)

683 (26.9)

671 (26.4)

—

651 (25.6) 696 (27.4)

—

688 (27.1)

118 (4.6)

—

118 (4.6)

—

219 (8.6)

171 (6.7) —

219 (8.6) 340 (13.4) 40

—

–4 600 (23.6)

2-14

SPEC

MAINTENANCE SPECIFICATIONS

DIMENSION 2 MANUAL TILT MODEL

HYDRO TILT/PTT MODEL

2-15

SPEC Symbol B1 B2 B3 B4 B5 B6 B9 B11 B12 B13 B14 D1 D2 C1 C2 C3

MAINTENANCE SPECIFICATIONS Unit mm (in) mm (in) mm (in) mm (in) mm (in) mm (in) mm (in) mm (in) mm (in) mm (in) mm (in) mm (in) mm (in) mm (in) mm (in) mm (in)

Model Manual tilt 62.5 (2.5) 208 (8.2) 121.5 (4.8) 32 (1.3) 131.5 (5.2) 245 (9.6) 25 (1.0) 90.5 (3.6) 57 (2.2) 122 (4.8) 156 (6.1) 10.5 (0.4) 26 (1.0) 30 (1.2) 66 (2.6) —

2-16

Hydro and PTT 126 (5.0) 254 (10.0) 163.5 (6.4) 50.8 (2.0) 180 (7.1) 355 (14.0) 18.5 (0.7) — — — — 13 (0.5) 55.5 (2.2) — — 69 (2.7)

SPEC

TIGHTENING TORQUE

TIGHTENING TORQUE SPECIFIED TORQUE

Nut Bolt Bolt Nut Bolt

M16 M10 M8 M12 M6

Nut Nut Bolt Bolt Bolt Bolt Nut Nut Bolt Bolt Bolt Bolt Bolt Bolt Bolt Bolt Bolt

1 5 2 1 1

30 40 16 75 5

3.0 4.0 1.6 7.5 0.5

22 29 11 54 3.6

M10 7/8 UNF M12 M2 M3 M4 7/8 UNF 7/8 UNF

2 2 1 8 8 8 2 2

38 20 38 21 21 21 45 24

3.8 2.0 3.8 2.1 2.1 2.1 4.5 2.4

27 14 27 15 15 15 32 17

M8 M6 M3 — — M4 M6 M5 —

1 3 5 1 1 4 4 2 2

7 9 4 90 70 4 7 4 11

0.7 0.9 0.4 9.0 7.0 0.4 0.7 0.4 1.1

5.1 6.5 2.9 65 50 2.9 5.1 2.9 8.0

Bolt

2-17

Bolt

572

Bolt

572

12 3

M3 M14

572

Bolt Bolt

15 80 2.9 5.8 0.7 18 11 20 2.9 5.8 3.6 8.0 11 20

242

LOWER: Propeller Lower unit Propeller shaft housing Pinion nut Water inlet BRACKET: Tiller handle mounting Steering friction mounting Tiller handle pivot Muffler Exhaust manifold Exhaust guide Clamp bracket (manual tilt) Clamp bracket PTT UNIT: Plug screw Tilt cylinder ass’y Motor unit Tilt cylinder end bolt Inner cylinder end bolt Gear pump Bottom cover Retaining plate Main valve

2.1 11 0.4 0.8 0.1 2.5 1.5 2.8 0.4 0.8 0.5 1.1 1.5 2.8

Crank case

Bolt

21 110 4 8 1 25 15 28 4 8 5 11 15 28

572

Exhaust cover

1st 2nd 1st 2nd 1st 2nd 1st 2nd

8 1

Cylinder head

M8 M16

Remarks

242

Reed valve Spark plug

Bolt Nut

Tightening torque Nm m•kg ft•lb

1st 2nd

Q‘ty

572

Intake manifold

Thread size

ENGINE: Engine unit Flywheel

Part name

572

Part to tightened

SPEC

TIGHTENING TORQUE

Nut (A)

Bolt (B)

8 mm 10 mm 12 mm 14 mm 17 mm

M5 M6 M8 M10 M12

GENERAL TORQUE

General torque specifications Nm mâ&#x20AC;˘kg ftâ&#x20AC;˘lb 5.0 0.5 3.6 8.0 0.8 5.8 18 1.8 13 36 3.6 25 43 4.3 31

This chart specifies the torques for tightening standard fastners with standard clean dry ISO threads at room temperature. Torque specifications for special components or assemblies are given in applicable sections of this manual. To avoid causing warpage, tighten multifastener assemblies in crisscross fashion, in progressive stages until the specified torque is reached.

2-18

Hello Thank you very much for your patience. At the bottom of the page there is a FREE ADD TO CART button. Click on it and you will get zip file on the bottom of the page. Please click here. Go back to the page.