Liebherr l507 1109 wheel loader service repair manual sn：19047

en

Service manual (20

Wheel loader (10 points)

L506 - L510, L507S, L509S L514 Stereo / Tier IIIA (10

en

Service manual (20

Wheel loader (10 points)

L506 - L510, L507S, L509S L514 Stereo / Tier IIIA (10

Address Address:

LIEBHERR-WERK BISCHOFSHOFEN GMBH Dr. Hans Liebherr – Straße 4 A – 5500 BISCHOFSHOFEN, AUSTRIA

Product identification Manufacturer: Product group: Type: Construction number: Serial number:

LIEBHERR-WERK BISCHOFSHOFEN GMBH Wheel loader L506 L507 L508 L509 L510 L507S 1108 1109 1111 1112 1114 1110 19047 19047 19047 19047 19047 19047

Document identification Order number: Author: Document version: Manual number: Owner:

10471543 LBH / T-DOK department 01

L509S 1113 19047

L514 1115 21019

Foreword

Target group

This Service Manual has been written for those whose job it is to make sure that the machines remain operational on a daily basis. This specifically includes the mechanics and workshop specialists at Liebherr dealers and Liebherr branch offices.

Contents

In the first chapter you will find information about safety regulations as well as specifications of the special tools needed for maintenance and repair.

Chapter 2 provides an overview of all important technical data for the entire machine and the individual assemblies.

The following chapter, entitled Maintenance, contains the maintenance and inspection schedule, inspection and setting logs, lubrication schedules and filling quantity tables, a description of maintenance procedures and specifications for prescribed lubricants and fuels.

The technical description of the machine in the following chapters is divided into 15 functional groups. The design, function, and technical data for each group, component and part are explained.

How to use this manual

This manual describes a variety of types and finished forms. In general, this information applies to the types and serial number groups specified in the footnotes. One exception is that specific type and serial number data are indicated at the beginning of each section (e.g. the technical specifications of the components).

Whenever possible, parts and components are supplemented by indication of the identification number in the heading.

This manual is available in German, English, French, Spanish, Italian and Russian.

Working instructions

It is imperative that safety regulations be observed with all tasks done on the machine. You will find information on this in the General Information chapter.

A complete set of tools in perfect condition is required for work on the machine, along with any special tools that might be needed. Absolute cleanliness must be observed with all tasks!

Sealing material such as O-rings and surface seals should be replaced whenever repairs are carried out.

DVD edition

We would particularly like to draw your attention to the fact that this book is available not only in printed form, but also as an electronic document on DVD (Lidos).

General information

1

Product description

2

Maintenance

3

Diesel engine

4

Cooling system

5

Travel hydraulics

6

Working hydraulics

7

Steering system

8

Brake system

9

Electrical system

10

Transfer gear

11

Axles, drive shafts

12

Machine frame, ballast weight

13

Central lubrication system

14

Covering, cab access

15

Cab, heating, air-conditioning

16

Lift arm, quick-change device

17

Attachments, accessories

18

Repair work, troubleshooting

19

Options

20

1 General Information 1.0 Chapter contents 1

General Information ............................................................ 1.0-1 1.1

Safety regulations ...........................................................................1.0-1 1.1.1

Introduction...........................................................................1.0-1

1.1.2

Overview of the safety regulations .......................................1.0-2

1.2

L506 - 1108 / from 22400 L506 - 1109 / from 22400 L508 - 1111 / from 22400 L509 - 1112 / from 22400

Special tools for maintenance and repair work...............................1.0-1 1.2.1

Special tools in general ........................................................1.0-1

1.2.2

Special tools for hydraulic cylinders .....................................1.0-1

1.2.3

Special tools for electronics..................................................1.0-2

1.2.4

Special tools for axles...........................................................1.0-2

1.2.5

Special tools for the central lubrication system ....................1.0-3

1.2.6

Special tools for the air conditioning system ........................1.0-3

1.2.7

Special tools for cab windows ..............................................1.0-3

L510 - 1114 / from 22400 L507 - 1110 / from 22400 L509 - 1113 / from 22400 L514 - 1115 / from 21019

1.0-1 of 2 copyright by

MJFCIFSS

Service Manual

General Information Safty regulations

1.1 Safety regulations Working on the machine poses safety risks to the operator, driver or maintenance engineers. You can prevent risks and accidents by regularly reading and observing the various safety instructions.

This is especially important for personnel who only occasionally work on the machine, for example, carrying out rigging or maintenance work. The safety regulations listed below, if conscientiously followed, will ensure your own safety and that of others, and will prevent the machine from being damaged.

Whenever tasks which could cause danger to personnel or damage to the machine are described, the necessary safety precautions are explained in this manual.

These are indicated by the headings Danger, Warning or Caution.

1.1.1

Introduction 1. The symbols below have the following meanings: Danger Risk of personal injury.

Denotes an impending dangerous situation which can lead to serious injury or death if not avoided.

Note the warning.

Warning Risk of personal injury.

Denotes a potentially dangerous situation which can lead to serious injury or death if not avoided.

Note the warning.

Caution Risk of personal injury.

Denotes a potentially dangerous situation which can lead to slight injury if not avoided.

Note the warning.

Caution Risk of damage to the machine.

Denotes actions or circumstances which may result in damage to the machine.

Note the warning.

Note Useful information Denotes information on correctly handling the machine and the lubricants and fuels used.

Observe the instructions.

L506 - 1108 / from 22400 L506 - 1109 / from 22400 L508 - 1111 / from 22400 L509 - 1112 / from 22400

L510 - 1114 / from 22400 L507 - 1110 / from 22400 L509 - 1113 / from 22400 L514 - 1115 / from 21019

1.0-1 of 2 copyright by

MJFCIFSS

General Information

Service Manual

Safety regulations

2. Observance of these instructions does not exempt you from following any additional rules and guidelines that may apply The following should also be observed: The safety rules in force at the operating site Legally enforceable road traffic regulations Guidelines issued by trade associations

1.1.2

Overview of the safety regulations A detailed description of these can be read in the relevant section of the safety regulations chapter in the operating manual.

The following sections are included in the operating manual:

1.0-2

1

Introduction

2

General safety regulations

3

Proper use

4

Decals on the machine

5

Instructions on preventing crushing injuries and burns

6

Instructions on preventing fires and explosions

7

Safety instructions for start-up

8

Safety precautions during start-up

9

Instructions for safe working

10

Safety instructions for driving on slopes

11

Parking safely

12

Transporting the machine safely

13

Towing the machine safely

14

Measures for ensuring safe maintenance

15

Safety instructions for working on machines with hydro accumulators

16

Safety instructions for welding work on the machine

17

Instructions for working safely on the working attachment

18

Safety instructions for transporting the machine by crane

19

Safe maintenance of hydraulic hoses and hose lines

20

Attachments and accessories

21

Protection against vibrations

of 2 copyright by

MJFCIFSS

L506 - 1108 / from 22400 L506 - 1109 / from 22400 L508 - 1111 / from 22400 L509 - 1112 / from 22400

L510 - 1114 / from 22400 L507 - 1110 / from 22400 L509 - 1113 / from 22400 L514 - 1115 / from 21019

Service Manual

General Information Special tools for maintenance and repair work

1.2 Special tools for maintenance and repair work 1.2.1 Description

Special tools in general ID no.

Digital second thermometer

7020372

All wheel loaders

Anti-freeze and battery tester

7408922

All wheel loaders

24 volt vacuum pump 12 to 24 volt transformer Filling and testing device with case Manometer 0 - 40 bar Manometer 0 - 250 bar Manometer 0 - 600 bar Manometer connection High pressure hose 1500 mm High pressure hose 4000 mm Screw connection M 10 x 1 Draining hose Drain piece

7408148 6905469

All wheel loaders L506 - L514

Remarks For measuring temperature during adjustments For checking the acidity concentration (battery charging state) and for checking the anti-freeze For avoidance of oil losses For use of the vacuum pump

8145359

All wheel loaders

For checking the hydro accumulator

7361288 5002932 5002866 7002436 7002475 7009134 5005180 7005660 7402657

All wheel loaders All wheel loaders All wheel loaders All wheel loaders All wheel loaders All wheel loaders All wheel loaders All wheel loaders All wheel loaders

Safety cap SW 10

7009315

All wheel loaders

Safety cap SW 13 Safety cap SW 17 Safety cap SW 19

7615515 7615589 7009317

All wheel loaders All wheel loaders All wheel loaders

Safety cap SW 17

7622068

All wheel loaders

For checking the hydraulic pressure For checking the hydraulic pressure For checking the hydraulic pressure Connection for the manometer High pressure hose for manometer High pressure hose for manometer For checking the hydraulic pressure For draining of oil via a drain valve For the draining hose For securing the valves on the variable adjustment motor For securing the valves on the pumps For securing the valves on the pumps For securing the valves on the pumps For securing the valves on the control block

1.2.2 Description

Special tools for hydraulic cylinders ID no.

Assembly sleeve 70 mm

9110556

Expansion sleeve 70 mm

9110402

Assembly sleeve 90 mm Expansion sleeve 90 mm

9227161 9227162

Assembly sleeve 80 mm

9227165

Expansion sleeve 80 mm

9227166

Assembly sleeve 100 mm

9998626

Expansion sleeve 100 mm

9110405

Assembly sleeve 110 mm

9170509

L506 - 1108 / from 22400 L506 - 1109 / from 22400 L508 - 1111 / from 22400 L509 - 1112 / from 22400

Use

Use Steering cylinder L506 L510 Steering cylinder L506 L510 Steering cylinder L514 Steering cylinder L514 Lift cylinder L506, L507 Tilt cylinder L506, L507, L514 - P Lift cylinder L506, L507 Tilt cylinder L506, L507, L514 - P Lift cylinder L508 - L510 Tilt cylinder L508 - L510 Lift cylinder L508 - L510 Tilt cylinder L508 - L510 Lift cylinder L514 - Z Tilt cylinder L514 - Z

L510 - 1114 / from 22400 L507 - 1110 / from 22400 L509 - 1113 / from 22400 L514 - 1115 / from 21019

Remarks For fitting the seals For fitting the seals For fitting the seals For fitting the seals For fitting the seals

For fitting the seals For fitting the seals For fitting the seals For fitting the seals

1.0-1 of 4 copyright by

MJFCIFSS

General Information

Service Manual

Special tools for maintenance and repair work

Description

ID no.

Expansion sleeve 110 mm

9170511

Bearing head assembly spanner 58/8 mm Bearing head assembly spanner 70/8 mm Bearing head assembly spanner 80/12 mm Special socket

9237826 9210219 9238020 93011858

1.2.3 Description

8502956

Test probe, red Test probe, black Magnet tester Stripping and crimping pliers 0.5 6.0 mm2 Insertion tool Piston mounting tool Crimping pliers Wedge extractor tool Extraction tool size 12 for pin and bushing Extraction tool size 16 for pin and bushing Extraction tool size 20 for pin and bushing EMT data cable

Use All wheel loaders

884191214 All wheel loaders 884191114 All wheel loaders 8145743 All wheel loaders

For fitting the seals For fitting the piston rod bearing For fitting the piston rod bearing For fitting the piston rod bearing For loosening and tightening the sleeve

Remarks For measuring voltage, current, resistance and frequency For testing DEUTSCH plugs For testing DEUTSCH plugs For checking solenoid valves

8460263

All wheel loaders

For MATE-N-LOK plug connectors

8145432 7366655 8503647 7026267

All wheel loaders All wheel loaders All wheel loaders All wheel loaders

For MATE-N-LOK plug connectors For MATE-N-LOK plug connectors For DEUTSCH plug connectors For DEUTSCH plug connectors

8145674

All wheel loaders

For DEUTSCH plug connectors

8145673

All wheel loaders

For DEUTSCH plug connectors

8503630

All wheel loaders

For DEUTSCH plug connectors

9067426

L506 - L514

Adapter cable RS232<>USB

693190714 All wheel loaders

USB dongle

10333608

1.2.4

L506 - L514

For communicating with the control electronics For communicating with the wheel loader electronics if there is an error with the RS232 interface on the notebook.

For communicating with the control electronics

Special tools for axles

Description

ID no.

Hand pump

8145835

Feeler gauge

8145535

Driver, Øa=150 mm

10220615

Driver, Øa=205 mm

10220622

Driver, Øa=62 mm

10220616

Set of 5 spanners

10220617

1.0-2

Remarks

Special tools for electronics ID no.

Digital multimeter

Use Lift cylinder L514 - Z Tilt cylinder L514 - Z Steering cylinder L506 L510 Lift cylinder L506, L507 Tilt cylinder L506, L507 Lift cylinder L508 - L510 Tilt cylinder L508 - L510 Quick coupler L506 -L510

Use Front axle L507s, L509s, L514 Front axle L507s, L509s, L514 Front axle L506 - L508, L507s Rear axle L506 - L508, L507s Axles L506 - L508, L507s Axles L506 - L514, L507s, L509s

of 4 copyright by

MJFCIFSS

Remarks For relieving the disc springs and for testing the tightness of the disc brakes For inspecting the wear on the wet disc brake (T1-2313) For installing the shaft seal ring in the hub (T2-2384) For installing the shaft seal ring in the hub (T15-4266) For installing the shaft seal ring in the axle casing (T3-2387) For gripping whilst installing or removing the bevel gear shaft (T5-2386)

L506 - 1108 / from 22400 L506 - 1109 / from 22400 L508 - 1111 / from 22400 L509 - 1112 / from 22400

L510 - 1114 / from 22400 L507 - 1110 / from 22400 L509 - 1113 / from 22400 L514 - 1115 / from 21019

Service Manual

General Information Special tools for maintenance and repair work

Description Slotted nut spanner with 3 adapters

ID no.

10220618

Use Axles L506 - L508, L507s Rear axle L506 - L508, L507s Axles L509 - L514, L509s Axles L509 - L514, L509s Axles L506 - L514, L507s, L509s Axles L509 - L514, L509s

Driver, Øa=66 mm

10220621

Driver, Øa=185 mm

10220623

Slotted nut spanner

10220633

Handle for driver

10220624

Slotted nut spanner with adapter

10220626

Slip bushing, Øa=33 mm

10220627

Front axle L509s

Thrust bolt

10220628

Front axle L509s

Driver, Øa=62.5 mm

10220631

Driver, Øa=90 mm

10220632

1.2.5 Description Filling press Filling connection Central lubrication BEKA MAX Data cable + software Central lubrication Gröneveld data cable Central lubrication Gröneveld plug adapter

Front axle L509 - L514, L509s Rear axles L509 - L514, L509s

Use All wheel loaders All wheel loaders

10008427

All wheel loaders

7624289

All wheel loaders

7624290

All wheel loaders

Description

Required for holding the driver For removing and fitting the bevel gear shaft (T22-3317/A) For installing the 100 % lockout piston (T29-3543) For tightening the 100 % lockout spring (T30-2316) For installing the shaft seal ring in the axle casing (T34-2322) For installing the shaft seal ring in the bearing bushing of the axle (T5-3342)

Special tools for the central lubrication system

ID no.

10009239 7029283

1.2.6

Remarks For removing and fitting the bevel gear shaft and differential (T6-1332) For installing the axle seal ring in the axle casing (T14-4210) For installing the shaft seal ring in the hub (T10-3502) For removing and fitting the differential gear (T13-3333)

Remarks For quickly filling the Reservoir For inspecting the Central lubrication system For inspecting the Central lubrication system For inspecting the Central lubrication system

Special tools for the air conditioning system ID no.

Use

Remarks

Vacuum pump

7027552

All wheel loaders

For evacuating the air conditioning system

4-valve test fitting

7027558

All wheel loaders

For testing, evacuating and filling the air conditioning system

Filling hose blue 1500 mm

7027553

All wheel loaders

For the test fitting

Filling hose yellow 1500 mm

7027554

All wheel loaders

For the test fitting

Filling hose red 1500 mm

7027555

All wheel loaders

For the test fitting

Car coupling 253a

7027556

All wheel loaders

For the test fitting

Car coupling 254a

7027557

All wheel loaders

For the test fitting

1.2.7 Description Complete tool box with suction pads

L506 - 1108 / from 22400 L506 - 1109 / from 22400 L508 - 1111 / from 22400 L509 - 1112 / from 22400

Special tools for cab windows ID no.

10021147

Use

Remarks

All wheel loaders

For installing and removing windows

L510 - 1114 / from 22400 L507 - 1110 / from 22400 L509 - 1113 / from 22400 L514 - 1115 / from 21019

1 . 0 - 3 of 4 copyright by

MJFCIFSS

General Information

Service Manual

Special tools for maintenance and repair work

1.0-4

of 4 copyright by

MJFCIFSS

L506 - 1108 / from 22400 L506 - 1109 / from 22400 L508 - 1111 / from 22400 L509 - 1112 / from 22400

L510 - 1114 / from 22400 L507 - 1110 / from 22400 L509 - 1113 / from 22400 L514 - 1115 / from 21019

2 Product description 2.0 Chapter contents 2

Product description ............................................................. 2.0-1 2.1

L506 - 1108 / from 22400 L507 - 1109 / from 22400 L508 - 1111 / from 22400 L509 - 1112 / from 22400

Technical data ................................................................................2.1-1 2.1.1

Complete machine................................................................2.1-1

2.1.2

Diesel engine......................................................................2.1-12

2.1.3

Cooling system ...................................................................2.1-18

2.1.4

Travel hydraulics ................................................................2.1-19

2.1.5

Working hydraulics .............................................................2.1-23

2.1.6

Steering system..................................................................2.1-28

2.1.7

Brake system......................................................................2.1-30

2.1.8

Electrical system.................................................................2.1-31

2.1.9

Transfer gear ......................................................................2.1-32

2.1.10

Axles and cardan shaft .......................................................2.1-33

2.1.11

Machine frame and ballast weight......................................2.1-38

2.1.12

Automatic central lubrication system..................................2.1-39

2.1.13

Cab, heating and air conditioning.......................................2.1-40

2.1.14

Lift arms and quick-change device.....................................2.1-41

2.1.15

Equipment and accessories ...............................................2.1-43

L510 - 1114 / from 22400 L507 - 1110 / from 22400 L509 - 1113 / from 22400 L514 - 1115 / from 21019

2.0-1 of 1 copyright of

MJFCIFSS

Service manual

Product description Technical data

2.1 Technical data 2.1.1

Complete machine

Valid for:

L506 - 1108 / from 22400

The values stated refer to the standard version of the machine: With 365 / 70 R18 tyres Tipping loads and weights include all lubricants, full fuel tank, ROPS/ FOPS cab and driver.

Description

Value Unit

Bucket capacity as per ISO 7546

0.8 m³

Bucket width

1900 mm

Specific material weight A Dump height at maximum lifting height and 45° tilt-out angle B Dump height

2550 mm

C Maximum bucket base height

3011 mm

D Maximum bucket pivot point height

3211 mm

E Maximum bucket top height F Reach at maximum lifting height and 42° tilt-out angle Fmax. Range at 42° tilt-out angle

4040 mm

G Digging depth

2872 mm

818 mm 1517 mm 80 mm

H Height above cab

2725 mm

I Height above exhaust

2600 mm

J Ground clearance L506 - 1108 / from 22400 L507 - 1109 / from 22400 L508 - 1111 / from 22400 L509 - 1112 / from 22400

1.8 t/m³

L510 - 1114 / from 22400 L507 - 1110 / from 22400 L509 - 1113 / from 22400 L514 - 1115 / from 21019

295 mm

2.1-1 of 1 copyright of

MJFCIFSS

Product description

Service manual

Technical data

Description

Value Unit

K Wheel base

2150 mm

L Overall length

5295 mm

Turning radius over bucket outer edge

3690 mm

Lifting force (SAE)

39 kN

Breakout force (SAE)

43 kN

Tipping load when straight

3540 kg

Tipping load articulated at 30°

3231 kg

Angle of articulation (to each side) Operating weight

5160 kg

Tractive force

4587 daN

Travel speed in travel range 1, forward and reverse

0 6 km/h

Travel speed in travel range 2, forward and reverse

0 20 km/h

Sound pressure level in cab LpA according to ISO 6396 Valid for:

30 °

70 dB (A)

L507 - 1109 / from 22400

The values stated refer to the standard version of the machine: With 365 / 70 R18 tyres Tipping loads and weights include all lubricants, full fuel tank, ROPS/ FOPS cab and driver.

2.1-2 of 2 copyright of

MJFCIFSS

L506 - 1108 / from 22400 L507 - 1109 / from 22400 L508 - 1111 / from 22400 L509 - 1112 / from 22400

L510 - 1114 / from 22400 L507 - 1110 / from 22400 L509 - 1113 / from 22400 L514 - 1115 / from 21019

Service manual

Product description Technical data

Description

Value Unit

Bucket capacity as per ISO 7546

0.9 m³

Bucket width

2050 mm

Specific material weight A Dump height at maximum lifting height and 45° tilt-out angle B Dump height

2550 mm

C Maximum bucket base height

3011 mm

D Maximum bucket pivot point height

3211 mm

E Maximum bucket top height F Reach at maximum lifting height and 42° tilt-out angle Fmax. Range at 42° tilt-out angle

4040 mm

G Digging depth

2872 mm

818 mm 1517 mm 80 mm

H Height above cab

2725 mm

I Height above exhaust

2600 mm

J Ground clearance

295 mm

K Wheel base

2150 mm

L Overall length

5295 mm

Turning radius over bucket outer edge

3690 mm

Lifting force (SAE)

44 kN

Breakout force (SAE)

48 kN

Tipping load when straight

3836 kg

Tipping load articulated at 30°

3501 kg

Angle of articulation (to each side)

30 °

Operating weight

5240 kg

Tractive force

4593 daN

Travel speed in travel range 1, forward and reverse

0 6 km/h

Travel speed in travel range 2, forward and reverse

0 20 km/h

Sound pressure level in cab LpA according to ISO 6396 Valid for:

1.8 t/m³

70 dB (A)

L508 - 1111 / from 22400

The values stated refer to the standard version of the machine: With 405 / 70 R18 tyres Tipping loads and weights include all lubricants, full fuel tank, ROPS/ FOPS cab and driver.

L506 - 1108 / from 22400 L507 - 1109 / from 22400 L508 - 1111 / from 22400 L509 - 1112 / from 22400

L510 - 1114 / from 22400 L507 - 1110 / from 22400 L509 - 1113 / from 22400 L514 - 1115 / from 21019

2.1-3 of 3 copyright of

MJFCIFSS

Product description

Service manual

Technical data

Description

Value Unit

Bucket capacity as per ISO 7546 Bucket width

1.0 m³ 2100 mm

Specific material weight A Dump height at maximum lifting height and 45° tilt-out angle B Dump height

2555 mm

C Maximum bucket base height

3035 mm

D Maximum bucket pivot point height

3235 mm

E Maximum bucket top height F Reach at maximum lifting height and 42° tilt-out angle Fmax range at 42° tilt-out angle

4115 mm

G Digging depth

1.8 t/m³

2896 mm

817 mm 1515 mm 56 mm

H Height above cab

2749 mm

I Height above exhaust

2624 mm

J Ground clearance

319 mm

K Wheel base

2150 mm

L Overall length

5371 mm

Turning radius over bucket outer edge

3820 mm

Lifting force (SAE)

48 kN

Breakout force (SAE)

49 kN

Tipping load when straight

4190 kg

Tipping load articulated at 30°

3824 kg

Angle of articulation (to each side)

2.1-4 of 4 copyright of

MJFCIFSS

L506 - 1108 / from 22400 L507 - 1109 / from 22400 L508 - 1111 / from 22400 L509 - 1112 / from 22400

30 °

L510 - 1114 / from 22400 L507 - 1110 / from 22400 L509 - 1113 / from 22400 L514 - 1115 / from 21019

Service manual

Product description Technical data

Description

Value Unit

Operating weight

5480 kg

Tractive force

4364 daN

Travel speed in travel range 1, forward and reverse

0 6 km/h

Travel speed in travel range 2, forward and reverse

0 20 km/h

Sound pressure level in cab LpA according to ISO 6396 Valid for:

70 dB (A)

L509 - 1112 / from 22400

The values stated refer to the standard version of the machine: With 405 / 70 R18 tyres Tipping loads and weights include all lubricants, full fuel tank, ROPS/ FOPS cab and driver.

Description

Value Unit

Bucket capacity as per ISO 7546

1.1 m³

Bucket width

L506 - 1108 / from 22400 L507 - 1109 / from 22400 L508 - 1111 / from 22400 L509 - 1112 / from 22400

2200 mm

Specific material weight A Dump height at maximum lifting height and 45° tilt-out angle B Dump height

2641 mm

C Maximum bucket base height

3139 mm

D Maximum bucket pivot point height

3339 mm

E Maximum bucket top height F Reach at maximum lifting height and 42° tilt-out angle

4235 mm

L510 - 1114 / from 22400 L507 - 1110 / from 22400 L509 - 1113 / from 22400 L514 - 1115 / from 21019

1.8 t/m³

3000 mm

909 mm

2.1-5 of 5 copyright of

MJFCIFSS

Product description

Service manual

Technical data

Description

Value Unit

Fmax. Range at 42° tilt-out angle G Digging depth

95 mm

H Height above cab

2750 mm

I Height above exhaust

2625 mm

J Ground clearance

335 mm

K Wheel base

2300 mm

L Overall length

5760 mm

Turning radius over bucket outer edge

4150 mm

Lifting force (SAE)

54 kN

Breakout force (SAE)

55 kN

Tipping load when straight

4645 kg

Tipping load articulated at 30°

4225 kg

Angle of articulation (to each side)

30 °

Operating weight

6080 kg

Tractive force

5592 daN

Travel speed in travel range 1, forward and reverse

0 6 km/h

Travel speed in travel range 2, forward and reverse

0 20 km/h

Sound pressure level in cab LpA according to ISO 6396 Valid for:

1640 mm

70 dB (A)

L510 - 1114 / from 22400

The values stated refer to the standard version of the machine: With 405 / 70 R20 tyres Tipping loads and weights include all lubricants, full fuel tank, ROPS/ FOPS cab and driver.

2.1-6 of 6 copyright of

MJFCIFSS

L506 - 1108 / from 22400 L507 - 1109 / from 22400 L508 - 1111 / from 22400 L509 - 1112 / from 22400

L510 - 1114 / from 22400 L507 - 1110 / from 22400 L509 - 1113 / from 22400 L514 - 1115 / from 21019

Service manual

Product description Technical data

Description

Value Unit

Bucket capacity as per ISO 7546

1.2 m³

Bucket width

2330 mm

Specific material weight A Dump height at maximum lifting height and 45° tilt-out angle B Dump height

3035 mm

C Maximum bucket base height

3174 mm

D Maximum bucket pivot point height

3374 mm

E Maximum bucket top height F Reach at maximum lifting height and 42° tilt-out angle Fmax range at 42° tilt-out angle

4270 mm

G Digging depth

2676 mm

874 mm 1605 mm 60 mm

H Height above cab

2785 mm

I Height above exhaust

2660 mm

J Ground clearance

370 mm

K Wheel base

2300 mm

L Overall length

5760 mm

Turning radius over bucket outer edge

4190 mm

Lifting force (SAE)

60 kN

Breakout force (SAE)

62 kN

Tipping load when straight

5036 kg

Tipping load articulated at 30°

4581 kg

Angle of articulation (to each side) Operating weight L506 - 1108 / from 22400 L507 - 1109 / from 22400 L508 - 1111 / from 22400 L509 - 1112 / from 22400

1.8 t/m³

L510 - 1114 / from 22400 L507 - 1110 / from 22400 L509 - 1113 / from 22400 L514 - 1115 / from 21019

30 ° 6250 kg

2.1-7 of 7 copyright of

MJFCIFSS

Product description

Service manual

Technical data

Description

Value Unit

Tractive force

5002 daN

Travel speed in travel range 1, forward and reverse

0 6 km/h

Travel speed in travel range 2, forward and reverse

0 20 km/h

Sound pressure level in cab LpA according to ISO 6396 Valid for:

70 dB (A)

L507 - 1110 / from 22400

The values stated refer to the standard version of the machine: With 365 / 70 R18 tyres Including all lubricants With a full tank With ROPS/FOPS cab and driver

Description

Value Unit

Bucket capacity as per ISO 7546 Bucket width

0.9 m³ 2050 mm

Specific material weight A Dump height at maximum lifting height and 45° tilt-out angle B Dump height

2550 mm

C Maximum bucket base height

3011 mm

D Maximum bucket pivot point height

3211 mm

E Maximum bucket top height

4040 mm

2.1-8 of 8 copyright of

MJFCIFSS

L506 - 1108 / from 22400 L507 - 1109 / from 22400 L508 - 1111 / from 22400 L509 - 1112 / from 22400

1.8 t/m³

2872 mm

L510 - 1114 / from 22400 L507 - 1110 / from 22400 L509 - 1113 / from 22400 L514 - 1115 / from 21019

Service manual

Product description Technical data

Description F Reach at maximum lifting height and 42° tilt-out angle Fmax. Range at 42° tilt-out angle G Digging depth

818 mm 1517 mm 80 mm

H Height above cab

2725 mm

I Height above exhaust

2600 mm

J Ground clearance

295 mm

K Wheel base

2150 mm

L Overall length

5295 mm

Turning radius over bucket outer edge

3690 mm

Lifting force (SAE)

44 kN

Breakout force (SAE)

48 kN

Tipping load when straight

3836 kg

Tipping load articulated at 30°

3501 kg

Angle of articulation (to each side)

30 °

Operating weight

5240 kg

Tractive force

46.03 kN

Travel speed in travel range 1, forward and reverse

0 7 km/h

Travel speed in travel range 2, forward and reverse

0 30 km/h

Sound pressure level in cab LpA according to ISO 6396 Valid for:

Value Unit

70 dB (A)

L509 - 1113 / from 22400

The values stated refer to the standard version of the machine: With 405 / 70 R18 tyres Including all lubricants With a full tank With ROPS/FOPS cab and driver

L506 - 1108 / from 22400 L507 - 1109 / from 22400 L508 - 1111 / from 22400 L509 - 1112 / from 22400

L510 - 1114 / from 22400 L507 - 1110 / from 22400 L509 - 1113 / from 22400 L514 - 1115 / from 21019

2.1-9 of 9 copyright of

MJFCIFSS

Product description

Service manual

Technical data

Description

Value Unit

Bucket capacity as per ISO 7546 Bucket width

1.1 m³ 2200 mm

Specific material weight A Dump height at maximum lifting height and 45° tilt-out angle B Dump height

2641 mm

C Maximum bucket base height

3139 mm

D Maximum bucket pivot point height

3339 mm

E Maximum bucket top height F Reach at maximum lifting height and 42° tilt-out angle Fmax. Range at 42° tilt-out angle

4235 mm

G Digging depth

1.8 t/m³

3000 mm

909 mm 1640 mm 95 mm

H Height above cab

2750 mm

I Height above exhaust

2625 mm

J Ground clearance

335 mm

K Wheel base

2300 mm

L Overall length

5760 mm

Turning radius over bucket outer edge

4150 mm

Lifting force (SAE)

54 kN

Breakout force (SAE)

55 kN

Tipping load when straight

4645 kg

Tipping load articulated at 30°

4225 kg

Angle of articulation (to each side) Operating weight

2.1-10 of 10 copyright of

MJFCIFSS

30 ° 6080 kg

L506 - 1108 / from 22400 L507 - 1109 / from 22400 L508 - 1111 / from 22400 L509 - 1112 / from 22400

L510 - 1114 / from 22400 L507 - 1110 / from 22400 L509 - 1113 / from 22400 L514 - 1115 / from 21019

Service manual

Product description Technical data

Description

Value Unit

Tractive force

55.9 kN

Travel speed in travel range 1, forward and reverse

0 7 km/h

Travel speed in travel range 2, forward and reverse

0 30 km/h

Sound pressure level in cab LpA according to ISO 6396 Valid for:

70 dB (A)

L514 - 1115 / from 21019

The values stated refer to the standard version of the machine: With 17.5 R25 tyres Including all lubricants With a full tank With ROPS/FOPS cab and driver

Description

Value

Kinematic version

Z

Bucket capacity as per ISO 7546

1.5

Bucket width

P 1.4 m³

2400

2400 mm

Specific material weight A Dump height at maximum lifting height and maximum tilt-out angle B Dump height

1.8

1.8 t/m³

2855

2985 mm

3260

3430 mm

C Maximum bucket base height

3440

3610 mm

D Maximum bucket pivot point height

3675

3860 mm

E Maximum bucket top height F Reach at maximum lifting height and maximum tilt-out angle G Digging depth

4550

4840 mm

830

785 mm

53

35 mm

H Height above cab

3025

3025 mm

I Height above exhaust

2890

2890 mm

385

385 mm

J Ground clearance L506 - 1108 / from 22400 L507 - 1109 / from 22400 L508 - 1111 / from 22400 L509 - 1112 / from 22400

Value Unit

L510 - 1114 / from 22400 L507 - 1110 / from 22400 L509 - 1113 / from 22400 L514 - 1115 / from 21019

2.1-11 of 11 copyright of

MJFCIFSS

Product description

Service manual

Technical data

Description

Value

Kinematic version

Z

P

K Wheel base

2600

2600 mm

L Overall length

6135

6330 mm

Turning radius over bucket outer edge

4510

4610 mm

Lifting force (SAE)

88

83 kN

Breakout force (SAE)

77

77 kN

Tipping load when straight

6200

5385 kg

Articulated tipping load

5680

4920 kg

Angle of articulation (to each side)

30

30 °

Operating weight

8350

8520 kg

Tractive force

58.3

58.3 kN

Travel speed in travel range 1, forward and reverse

0 8

0 8 km/h

Travel speed in travel range 2, forward and reverse

0 30

0 30 km/h

Sound pressure level in cab LpA according to ISO 6396

2.1.2

Value Unit

70

70 dB (A)

Diesel engine Deutz TD 2009 diesel engine

Valid for:

L506 - 1108 / from 22400;

Description

Value Unit Deutz TD 2009 L04

Engine model Number of cylinders Combustion method

4 pc.

Four-stroke, direct injection

Capacity

2289 Litres

Rated power as per ISO 9249

46/63 kW/hp

Rated speed

2600 rpm

Maximum torque at 1600 rpm Lower idle speed Upper idle speed

200 Nm 950

50

rpm

2800

50

rpm

Cylinder bore

90 mm

Stroke

90 mm

Compression ratio Combustion pressure Injection nozzle operating pressure Firing order Injection pump

Hydraulic setting

Mechanical

Turbocharger

MJFCIFSS

250 bar

Injection pump distributor

Controller

copyright of

25 30 bar 1-3-4-2

Inlet and outlet valve play

2.1-12 of 12

18:1

Limited-pressure wastegate L506 - 1108 / from 22400 L507 - 1109 / from 22400 L508 - 1111 / from 22400 L509 - 1112 / from 22400

L510 - 1114 / from 22400 L507 - 1110 / from 22400 L509 - 1113 / from 22400 L514 - 1115 / from 21019

Service manual

Product description Technical data

Description

Value Unit

Longitudinal/traverse inclinability

30 °

Starter power consumption

2.0 kW

Alternator voltage output

12 V

Alternator current output

80 A

Control thermostat opening temperature

86 °C

Minimum pressure in cooling system behind pump

0.7 bar

Auxiliary power take-off transmission

1.0 i

Weight

220 kg EU directive 97/68 EC Stage IIIA

Emission thresholds comply with

Deutz TD 2009 diesel engine Valid for:

L507 - 1109 / from 22400; L507 - 1110 / from 22400; L508 - 1111 / from 22400;

Description

Value Unit Deutz TD 2009 L04

Engine model Number of cylinders

4 pc.

Four-stroke, direct injection

Combustion method Capacity

2289 cm³

Rated power as per ISO 9249

48/65 kW/hp

Rated speed

2800 rpm

Maximum torque at 1600 rpm

200 Nm

Lower idle speed

950

50

rpm

Upper idle speed

3070

50

rpm

Cylinder bore

90 mm

Stroke

90 mm

Compression ratio

18:1

Combustion pressure

25 30 bar

Injection nozzle operating pressure Firing order

1-3-4-2

Inlet and outlet valve play

Hydraulic setting

Injection pump

Injection pump distributor

Controller

Mechanical

Turbocharger

L506 - 1108 / from 22400 L507 - 1109 / from 22400 L508 - 1111 / from 22400 L509 - 1112 / from 22400

250 bar

Limited-pressure wastegate

Longitudinal/traverse inclinability

30 °

Starter power consumption

2.0 kW

Alternator voltage output

12 V

Alternator current output

80 A

Control thermostat opening temperature

86 °C

Minimum pressure in cooling system behind pump

0.7 bar

L510 - 1114 / from 22400 L507 - 1110 / from 22400 L509 - 1113 / from 22400 L514 - 1115 / from 21019

2.1-13 of 13 copyright of

MJFCIFSS

Product description

Service manual

Technical data

Description

Value Unit

Auxiliary power take-off transmission

1.0 i

Weight

220 kg

Emission thresholds comply with

EU directive 97/68 EC Stage IIIA

Deutz TD 2011 diesel engine Valid for:

L509 - 1112 / from 22400; L509 - 1113 / from 22400; L510 - 1114 / from 22400;

Description

Value Unit

Engine model

Deutz TD 2011 L04W

Number of cylinders Combustion method

4 pc.

Four-stroke, direct injection

Capacity

3619 cm³

Rated power as per ISO 9249

60/82 kW/hp

Rated speed

2600 rpm

Maximum torque at 1600 rpm Lower idle speed Upper idle speed Cylinder bore

257 Nm 950

50

rpm

2800

50

rpm

96 mm

Stroke

125 mm

Compression ratio

18:1

Combustion pressure Injection nozzle operating pressure Firing order

22 30 bar 170 bar 1-3-4-2

Inlet and outlet valve play Injection pump

0.3 / 0.5 PLD

Controller

Mechanical Limited-pressure wastegate

Turbocharger Longitudinal/traverse inclinability

30 °

Starter power consumption

2.3 kW

Alternator voltage output

14 V

Alternator current output

95 A

Control thermostat opening temperature

88 92 °C

Minimum pressure in cooling system behind pump

0.7 bar

Auxiliary power take-off transmission

1.0 i

Weight

268 kg

Emission thresholds comply with

2.1-14 of 14 copyright of

MJFCIFSS

L506 - 1108 / from 22400 L507 - 1109 / from 22400 L508 - 1111 / from 22400 L509 - 1112 / from 22400

EU directive 97/68 EC Stage IIIA

L510 - 1114 / from 22400 L507 - 1110 / from 22400 L509 - 1113 / from 22400 L514 - 1115 / from 21019

Service manual

Product description Technical data

John Deere CD4045 diesel engine Valid for:

L514 - 1115 / from 21019;

Description

Value Unit

Engine model

John Deere CD4045HF288

Type

4-cylinder inline

Combustion method

Four-stroke direct injection

Capacity

4525 cm³

Rated power as per ISO 9249

72 / 97 kW / hp

Rated speed

2400 rpm

Maximum torque at 1680 rpm

395 Nm

Lower idle speed Upper idle speed

850

10

rpm

2520

20

rpm

Cylinder bore

106 mm

Stroke

127 mm

Compression ratio

19:1

Combustion pressure

24 28 bar

Injection nozzle operating pressure

245 bar

Firing order

1342

Inlet and outlet valve play

0.35/0.45

Injection pump

Common rail

Controller

Electronic

Turbocharger

Constant

Longitudinal/traverse inclinability

30 °

Starter power consumption

4.8 kW

Alternator voltage output

12 V

Alternator current output

65 A

Control thermostat opening temperature

82.2 °C

Minimum pressure in cooling system behind pump

0.14 bar

Auxiliary power take-off transmission

0.968 i

Weight

444 kg

Emission thresholds comply with

EU directive 97/68 EC Stage III

Fuel system Valid for:

L506 - 1108 / from 22400; L507 - 1109 / from 22400; L508 - 1111 / from 22400; L509 - 1112 / from 22400; L510 - 1114 / from 22400; L507 - 1110 / from 22400; L509 - 1113 / from 22400;

Description

L506 - 1108 / from 22400 L507 - 1109 / from 22400 L508 - 1111 / from 22400 L509 - 1112 / from 22400

Value Unit

Tank capacity, FULL

80 l

Tank capacity, RESERVE

20 l

L510 - 1114 / from 22400 L507 - 1110 / from 22400 L509 - 1113 / from 22400 L514 - 1115 / from 21019

2.1-15 of 15 copyright of

MJFCIFSS

Product description

Service manual

Technical data

Valid for:

L514 - 1115 / from 21019

Description

Value Unit

Tank capacity, FULL Tank capacity, RESERVE

160 l 30 l

Fuel pre-filter Valid for:

L506 - 1108 / from 22400; L507 - 1109 / from 22400; L508 - 1111 / from 22400; L507 - 1110 / from 22400;

Description

Value Unit

Type

In-line filter -

Filtration grade Valid for:

700 µ

L509 - 1112 / from 22400; L509 - 1113 / from 22400; L510 - 1114 / from 22400;

Description

Value Unit

Type

Strainer insert -

Filtration grade Valid for:

Coarse strainer µ

L514 - 1115 / from 21019

Description

Value Unit Replaceable cartridge

Type Filtration grade

30 µ

Fuel fine filter Valid for:

L506 - 1108 / from 22400; L507 - 1109 / from 22400; L507 - 1110 / from 22400; L508 - 1111 / from 22400;

Description

Value Unit Replaceable cartridge

Type Filtration grade Valid for:

5 µ

L509 - 1112 / from 22400; L509 - 1113 / from 22400; L510 - 1114 / from 22400;

Description

Value Unit

Type

Replaceable cartridge

Filtration grade Valid for:

5 µ

L514 - 1115 / from 22400;

Description

Value Unit

Type

Replaceable cartridge

Filtration grade

2.1-16 of 16 copyright of

MJFCIFSS

5 µ

L506 - 1108 / from 22400 L507 - 1109 / from 22400 L508 - 1111 / from 22400 L509 - 1112 / from 22400

L510 - 1114 / from 22400 L507 - 1110 / from 22400 L509 - 1113 / from 22400 L514 - 1115 / from 21019

Service manual

Product description Technical data

Pre-glow system Valid for:

L506 - 1108 / from 22400; L507 - 1109 / from 22400; L508 - 1111 / from 22400; L509 - 1112 / from 22400; L510 - 1114 / from 22400; L507 - 1110 / from 22400; L509 - 1113 / from 22400;

Description

Value Unit

Power consumption per plug

20

8

Amp

L514 intake air pre-heater Valid for:

L514 - 1115 / from 21019

Description

Value Unit

Heating flange current consumption

120

20

Amp

Vacuum switch Description Air filter contamination vacuum switch activation point

Value Unit 50 mbar

Coupling torsion damper Valid for:

L506 - 1108 / from 22400; L507 - 1109 / from 22400; L507 - 1110 / from 22400; L508 - 1111 / from 22400;

Description

Value Unit CF-KE-093-6.5- 65603

Type Tightening torque for elastic element fixing screws (6 x) Valid for:

23 Nm

L509 - 1112 / from 22400; L509 - 1113 / from 22400; L510 - 1114 / from 22400;

Description

Value Unit CF-KE-093- 6.5- 65921

Type Tightening torque for elastic element fixing screws (6 x) Valid for:

23 Nm

L514 - 1115 / from 22400;

Description

Value Unit

Type

BOWEX 65 - 10" -

Tightening torque for elastic element fixing screws (8 x) Tightening torque for coupling star fixing screws (2 x)

L506 - 1108 / from 22400 L507 - 1109 / from 22400 L508 - 1111 / from 22400 L509 - 1112 / from 22400

L510 - 1114 / from 22400 L507 - 1110 / from 22400 L509 - 1113 / from 22400 L514 - 1115 / from 21019

40 Nm 45+5 Nm

2.1-17 of 17 copyright of

MJFCIFSS

Product description

Service manual

Technical data

2.1.3

Cooling system Cooling system Description

Value Unit

Fan speed, depending on engine speed and temperature

580 3100 rpm

Operating pressure at 1100 mA and fan speed Coolant up to 87°C Hydraulic oil up to 57°C

14 ±5 bar 580 ±50 rpm

Operating pressure at nominal current L506, L507, L508

130 ±10 bar

Operating pressure at nominal current L509, L510

130 ±10 bar

Operating pressure at nominal current

130 ±10 bar L514

Proportional pressure relief valve resistance at 20°C Pressure relief valve

4.8 210 ±10 bar

Fan gear pump Valid for:

L506 - 1108 / from 22400; L509 - 1112 / from 22400; L510 - 1114 / from 22400; L509 - 1113 / from 22400;

Description

Value Unit

Capacity

9.6 cm³

Flow rate (at rated speed) Valid for:

L507 - 1109 / from 22400; L508 - 1111 / from 22400; L507 - 1110 / from 22400;

Description

Value Unit

Capacity

9.6 cm³

Flow rate (at rated speed) Valid for:

25.0 l/min

26.9 l/min

L514 - 1115 / from 22400;

Description

Value Unit

Capacity

11.5 cm³

Flow rate (at rated speed)

27.6 l/min

Fan gear motor Description

Value Unit

Displacement

8.3 cm³

Max. pressure

210 bar

Temperature sensors Description

Value Unit

Measuring range

-30 to +130 °C

Resistance at 20°C

2.1-18 of 18 copyright of

MJFCIFSS

L506 - 1108 / from 22400 L507 - 1109 / from 22400 L508 - 1111 / from 22400 L509 - 1112 / from 22400

1112 L510 - 1114 / from 22400 L507 - 1110 / from 22400 L509 - 1113 / from 22400 L514 - 1115 / from 21019

Service manual

Product description Technical data

2.1.4

Travel hydraulics Variable displacement pump L506 - L510

Valid for:

L506 - 1108 / from 22400;

Description

Value Unit

Type

A4VG 40 DA

Maximum capacity

40 cm³

Flow rate at rated speed

104 l/min

Maximum swivel angel (both sides)

20 °

Speed (at rated speed)

2600 rpm

Power

39.8 kW

Replenishing pump capacity

8.6 cm³

Replenishing pump flow rate (at rated speed) Inlet restrictor

1.8 mm

Swivel restrictor

0.8 mm

Travel direction solenoid current consumption

2.5 A

Travel direction solenoid resistance

5 ohms

Replenishing pressure at upper idling speed

±2

bar

±50

rpm

±100

rpm

±10

bar

±5

bar

Start of regulation

2300

Pressure relief and replenishing valves Pressure cut-off

460

430

Weight

31 kg

L507 - 1109 / from 22400; L508 - 1111 / from 22400;

Description

Value Unit

Control type

A4VG 40 DA

Maximum capacity

40 cm³

Flow rate at rated speed

112 l/min

Maximum swivel angel (both sides)

20 °

Speed (at rated speed)

2800 rpm

Power

42.9 kW

Replenishing pump capacity

8.6 cm³

Replenishing pump flow rate (at rated speed)

24.1 l/min

Inlet restrictor

1.8 mm

Swivel restrictor

0.8 mm

Travel direction solenoid current consumption

2.5 A

Travel direction solenoid resistance

5 ohms

Replenishing pressure at upper idling speed

±2

30

L510 - 1114 / from 22400 L507 - 1110 / from 22400 L509 - 1113 / from 22400 L514 - 1115 / from 21019

bar

1100 ±50 rpm

Start of regulation L506 - 1108 / from 22400 L507 - 1109 / from 22400 L508 - 1111 / from 22400 L509 - 1112 / from 22400

30 1100

Pump output at 400 bar

Valid for:

22.3 l/min

2.1-19 of 19 copyright of

MJFCIFSS

Product description

Service manual

Technical data

Description

Value Unit 2300 ±100 rpm

Pump output at 400 bar Pressure relief and replenishing valves

460 ±10 bar 430 ±5 bar

Pressure cut-off Weight Valid for:

31 kg

L509 - 1112 / from 22400; L510 - 1114 / from 22400; L507 - 1110 / from 22400; L509 - 1113 / from 22400;

Description

Value Unit

Type

A4VG 56 DA

Maximum capacity

56 cm³

Flow rate at rated speed

145 l/min

Maximum swivel angel (both sides)

20 °

Speed (at rated speed)

2600 rpm

Power

L507s

41.1 kW

Power

L509, L509s

51.9 kW

Power

L510

55.6 kW

Replenishing pump capacity

11.6 cm³

Replenishing pump flow rate (at rated speed)

30.1 l/min

Inlet restrictor

1.8 mm

Swivel restrictor

1.0 mm

Travel direction solenoid current consumption

2.5 A

Travel direction solenoid resistance Replenishing pressure at upper idling speed Start of regulation Pump output at 400 bar Pressure relief and replenishing valves Pressure cut-off

5 ohms 30

2

1100

±50

rpm

±100

rpm

±10

bar

±5

bar

2300

490

460

Weight

bar

38 kg

Variable displacement pump L514 Valid for:

L514 - 1115 / from 21019;

Description

Value Unit

Control type

DA

Maximum capacity

90 cm³

Flow rate at rated speed Maximum swivel angel (both sides)

216 l/min 20 °

Speed (at rated speed)

2400 rpm

Power

68.4 kW

Replenishing pump capacity

19 cm³

Replenishing pump flow rate (at rated speed)

45.6 l/min 1.8 mm

Inlet restrictor

2.1-20 of 20 copyright of

MJFCIFSS

L506 - 1108 / from 22400 L507 - 1109 / from 22400 L508 - 1111 / from 22400 L509 - 1112 / from 22400

L510 - 1114 / from 22400 L507 - 1110 / from 22400 L509 - 1113 / from 22400 L514 - 1115 / from 21019

Service manual

Product description Technical data

Description

Value Unit

Swivel restrictor

1.0 mm

Travel direction solenoid current consumption

2.5 A

Travel direction solenoid resistance

5 ohms

Replenishing pressure at upper idling speed

±2

32

bar

1050 ±50 rpm

Start of regulation

1950 ±100 rpm

Pump output at 380 bar Pressure relief and replenishing valves

490 ±10 bar 460 ±5 bar

Pressure cut-off Weight

60 kg

Variable displacement motor Valid for:

L506 - 1108 / from 22400; L507 - 1109 / from 22400; L508 - 1111 / from 22400;

Description

Value Unit

Type

A6VM 80 DA

Maximum displacement

80 cm³

Minimum displacement

19.2 cm³

Maximum swivel angel

25 °

Minimum swivel angle

5.8 °

Maximum speed

5230 rpm

Torque ( p 400 bar)

509 Nm

Swivel restrictor (size)

0.30 mm

Regulating piston surface ratio

8:100

Maximum discharge valve capacity

5.0 l

Discharge valve orifice diameter

1.4 mm

Solenoid valve current consumption travel direction + travel range 1

2.5 A

Solenoid valve resistance travel direction + travel range 1

5 ohms

Control range while driving

230

Weight Valid for:

bar

34 kg

L509 - 1112 / from 22400; L510 - 1114 / from 22400;

Description

Value Unit

Type

A6VM 107 DA

Maximum displacement

107 cm³

Minimum displacement

32.3 cm³

Maximum swivel angel

25 °

Minimum swivel angle

7.3 °

Maximum speed

4480 rpm

Torque ( p 400 bar)

681 Nm

Swivel restrictor (size)

0.45 mm

Regulating piston surface ratio L506 - 1108 / from 22400 L507 - 1109 / from 22400 L508 - 1111 / from 22400 L509 - 1112 / from 22400

±10

L510 - 1114 / from 22400 L507 - 1110 / from 22400 L509 - 1113 / from 22400 L514 - 1115 / from 21019

8 :100

2.1-21 of 21 copyright of

MJFCIFSS

Product description

Service manual

Technical data

Description

Value Unit

Maximum discharge valve capacity

8 l

Discharge valve orifice diameter

1.8 mm

Solenoid valve current consumption travel direction + travel range 1

2.5 A

Solenoid valve resistance travel direction + travel range 1

5 ohms

Control range while driving

L509

215

Control range while driving

L510

230

Weight Valid for:

bar

±10

bar

47 kg

L507 - 1110 / from 22400; L509 - 1113 / from 22400;

Description

Value Unit

Control type

A6VM 140 DA

Maximum displacement

140 cm³

Minimum displacement

31.3 cm³

Maximum swivel angel

25 °

Minimum swivel angle

5.4 °

Maximum speed

4635 rpm

Torque ( p 400 bar)

891 Nm

Swivel restrictor (size)

0.55 mm

Regulating piston surface ratio

8:100

Maximum discharge valve capacity

10.0 l

Discharge valve orifice diameter

2.0 mm

Solenoid valve current consumption travel direction + travel range 1

2.5 A

Solenoid valve resistance travel direction + travel range 1

5 ohms

Control range while driving

L507

170

Control range while driving

L509

215

Weight Valid for:

±10

±10

bar

±10

bar

60 kg

L514 - 1115 / from 21019;

Description

Value Unit A6VM 200 DA

Control type Maximum displacement

200 cm³

Minimum displacement

53.7 cm³

Maximum swivel angel

25 °

Minimum swivel angle

6.5 °

Maximum speed

4005 rpm

Torque ( p 400 bar)

1273 Nm

Swivel restrictor (size) Regulating piston surface ratio

0.4 mm 8:100

Maximum discharge valve capacity

14 l

Discharge valve orifice diameter

2.4 mm

2.1-22 of 22 copyright of

MJFCIFSS

L506 - 1108 / from 22400 L507 - 1109 / from 22400 L508 - 1111 / from 22400 L509 - 1112 / from 22400

L510 - 1114 / from 22400 L507 - 1110 / from 22400 L509 - 1113 / from 22400 L514 - 1115 / from 21019

Thank you very much for your reading.

Please Click Here Then Get More Information.