Catalogue 2.0
Contents Introduction 3 Linear TiMi 12
TiMi 352/e352
13
TiMi 504/e504
13
TiMi 508/e508
13
TiMi RGB
14
TiMi XEN
14
TiMi Click 22
TiMi Click 506/e506
22
LiNi-S 32
LiNi-S 352/e352
33
LiNi-S 007/e007
33
LiNi-S 504/e504
33
LiNi-S 508/e508
34
LiNi-S RGB
34
LiNi Glow 42
LiNi Glow 007/e007
43
LiNi Glow 508/e508
43
LiNi-R 50
LiNi-R 352/e352
50
LiNi-R 504/e504
51
LiNi-R 508/e508
51
LiNi-R RGB
51
LiNi-S XL 60
LiNi-S XL 352/e352
60
LiNi-S XL 504/e504
61
LiNi-S XL 508/e508
61
LiNi-S XL RGB
61
LiNi Glow XL 68
LiNi Glow XL 352/e352
68
LiNi Glow XL 504/e504
69
LiNi Glow XL 508/e508
69
LiNi Glow XL RGB
69
LiNi-R XL 76
TANA Micro 94
Quadro Luna 188
TANA Micro 352/e352
95
Quadro Luna/eQuadro Luna
189
TANA Micro 504/e504
95
Quadro Luna RGB
189
TANA Micro 508/e508
95
Groove Light 104
Groove Light
105
Groove Light RGB
105
Groove IN 108
Groove IN
109
Groove IN RGB
109
MiMi 116
MiMi 352/e352
117
MiMi 007/e007
117
MiMi 504/e504
117
MiMi 508/e508
118
MiMi RGB
118
MiMi XEN
118
High Power SEN
198
SEN 100
199
SEN 050
199
SEN 033
199
SEN 094 RGB
200
SEN 047 RGB
200
SEN-F 210
SEN-F 100
211
SEN-F 050
211
SEN-F 033
211
SIL
218
SIL
218
KKSL 128
Spotlights
KKSL 352/e352
128
PUK-L 224
KKSL 504/e504
129
PUK-L
KKSL 508/e508
129
KKSL RGB
129
TAYO Spot 230
MoMo 138
MoMo 352/e352
138
MoMo 504/e504
139
MoMo 508/e508
139
MoMo RGB
139
MoMo-F 146
TAYO Spot
224 230
TAYO Micro 232
TAYO Micro (Indoor)
233
TAYO Micro (Outdoor)
233
LED MR16 240
LED MR16
240
MoMo-F 352/e352
146
Power/Control
MoMo-F 504/e504
147
Control Gear 246
MoMo-F 508/e508
147
visDIM 1-10V PSU (100W/24V)
246
MoMo-F RGB
147
visDIM 1-10V sub-controller
246
SUMO 156
visDIM DMX sub-controller
246
DMX master controller
248
DMX repeater
248
SUMO 504/e504
156
Flexible
LiNi-R XL 352/e352
76
FX
164
LiNi-R XL 504/e504
77
FX/eFX
165
LiNi-R XL 508/e508
77
165
KKDC Global 260
LiNi-R XL RGB
77
KKFS 174
Terms and Conditions 261
FX RGB
TANA 86
KKFS
TANA 352/e352
86
TANA 504/e504
87
Duo Luna 184
TANA 508/e508
87
TANA RGB
87
174
Duo Luna/eDuo Luna
185
Duo Luna RGB
185
Industry Terms 252
Introduction About KKDC KKDC is an established manufacturer, designing and producing a wide range of specialist LED lighting solutions for high end architectural markets worldwide. Research and manufacture take place in our expanding Korean facility outside Seoul, with product design and marketing from our London offices. Product sales and support services continue to expand worldwide. Offices in New York and Kyoto now join those in London, Paris, Beijing, Auckland and Sydney, with a growing local supply and customer service network in the Middle East, Asia and beyond. From the start, the success of KKDC has always been grounded in our research and implementation of complete electronic and engineering solutions in the application of LED’s produced from the best performing patented materials.
2
Introduction
Introduction 3
Comprehensive Control From raw LED source to finished luminaire, we have the multidisciplinary engineering capability, the research base and production infrastructure to control every aspect of product design and manufacture – LED die procurement, phosphors and packaging, thermal and electronic design, luminaire design and all points in between. Optical, electronic, thermal and mechanical aspects of LED product design are significantly interdependent. To maximise the capability of current technology requires careful balance throughout the whole design process. With comprehensive control of source components and the expertise and facility to adjust and optimise all design and manufacturing parameters, KKDC engineers have a rare freedom of choice in how best to achieve this. Producing a flexible, coherent and durable product range requires nothing less. As a direct result, KKDC delivers complete linear LED products customised on order for length, IP rating, luminous output, colour temperature and colour consistency providing bespoke solutions to specific project requirements. Features of our comprehensive approach: l Integrated engineering design for the complete luminaire. The sum of all the parts – not some of the parts. l Comprehensive control of all output and colour characteristics by design. l Research, development, manufacture and testing on one site under the control of a single multidisciplinary engineering team. l Customised, configurable ordering options for all KKDC linear products.
4
Introduction
Introduction 5
KKDC Colour
Key points:
Our principal product ranges all feature white LED packages exclusively produced to KKDC designs. The best patented Toyoda Gosei dice and patent phosphors procured directly from their makers are packaged to our specification for each chosen colour temperature and luminous output rating. We control the chromaticity and binning of our LED production and through our use of the premium, patented Mitsubishi phosphor, a high Colour Rendering Index (>90), with significantly superior R9 values, is now a standard product feature.* Unified LED source design delivers distinctively consistent and stable colour performance across all KKDC SMD LED product ranges. Designers can achieve colour matching across whole projects and consistency between projects with excellent results, both in ‘stand-alone’ LED locations and in mixed technology lighting schemes. Every length of KKDC linear LED product manufactured is etched with a unique project code and the LED’s within are traceable. If a project is duplicated or extended, or if products are damaged in use – even years after installation – we ensure an accurate colour match by manufacturing LED packages to the same colour specification. For some custom applications our control of package design even allows our products to be matched with specific project colour requirements.
l Visible and measured colour consistency – within linear products, between product ranges and across multiple projects over time. l KKDC colour temperatures and hue characteristics – our specification through design. l Flexible or rigid PCB; the colour characteristics remain the same in all KKDC SMD LED products. l Toyoda Gosei dice and proprietary blending of patented phosphors for a unique KKDC LED package. l High CRI with premium, patented Mitsubishi phosphor for superior R9 values. l s-line and e-line – Colour consistency choice to match project requirements. l KKDC colour characteristics are developed, tested and tuned in collaboration with leading lighting designers.
KK504 output properties 100
1000
970
90
&
80
s-line and e-line products feature LED packages binned to 2 SDCM or 3 SDCM respectively with their price point weighted accordingly. Identical in chip type and phosphors, all s-line and e-line products share the same high quality electrical and mechanical components providing specifiers with a simple choice to suit project requirements and budgets.
70 600 lm/m 400
50
200
CRI
40 30
R9
R9
20 10
0
0.43
60 52
CRI
Lumens per meter
800
Because not all projects and installation locations benefit from the highest degree of consistency in colour temperature and hue, we introduced s-line and e-line – a two tier product offering across almost all of our SMD LED products.
92
0
LM79-08 accredited KK504 (3200K) output properties (testing by LUX-TSI Ltd)
3000 0.42
3000K 0.41
3500K y
3000K
B ack n Bl ckia (°K) n a l P Tc
3200K
0.40
ody
s-line e-line
0.39
0.38 0.41
0.42
0.43
0.44
0.45
0.46
x KKDC KK504/KK352 LED (CIE 1931)
* Only applies to s-line and e-line product ranges.
6
Introduction
Introduction 7
KKDC Testing and Standards
More than the LED
With the on-going education in the marketplace and the gradual introduction and adoption of standards and associated testing, more designers and specifiers have a good understanding of the hidden factors involved in producing colour consistent, stable and durable LED products.
Though an excellent family of KKDC LED light sources is the basis of all our product designs, successful electronic, electrical, thermal and optical integration within a finished luminaire is crucial if products are to perform as required over a long lifetime.
As a global company, selling a quality product in the most discerning markets, all our products undergo external testing by independent accredited authorities to quantify and substantiate their performance. KKDC products are tested to the IES LM79-08 photometric standard by the UK’s only UKAS (ILAC) accredited, independent commercial laboratory currently doing so (LUX-TSI Ltd).
Mounting, housing, and powering our light sources to maintain a consistent quality of light within a durable luminaire is where product design experience and our broad competence and attention to detail in many engineering fields comes to the fore. Ongoing research in electronic, electrical and chemical engineering techniques alongside investment in manufacturing process technology and our quality control testing regime continue to be KKDC priorities.
Certification and provision of data from LM79-08 testing by an internationally accredited laboratory is currently considered best practice worldwide for the testing of complete LED luminaires.
KKDC electronic engineers and software programmers have also developed control technology, to match the rising demands of projects using our SMD LED products.
Through the European CE scheme, ETL and UL certification, all KKDC products maintain the most internationally recognised safety standards.
Some examples of KKDC research in action:
Our research and manufacturing processes also incorporate many electrical and photometric testing procedures for individual components and finished luminaires.
l Best quality drive components are evaluated against electrical operating stresses to minimise failure rates.
Thermal shock and harsh environment evaluation are a part of product development and ongoing production testing.
l Analysis and optimisation of drive currents, power distribution efficiency and heat dissipation within our circuit board designs for thermal resilience and colour maintenance in all operating environments.
Automated SMD PCB production also incorporates chromaticity testing as part of our five point quality control procedure.
l Investigation of LED package distribution and geometry to achieve even illumination within and across adjoining products.
Extended duration testing of complete luminaires ensures products will perform as designed throughout their lifetime and all components remain within acceptable temperature tolerances.
l In-house chemical engineering research producing developments in optically efficient polyurethane resins, silicone formulations and their application techniques. Employed alongside our vacuum deposition coating process to ensure thorough protection for many of our high IP rated products.
We look to provide our own test data wherever it can add useful understanding for specifiers beyond that provided by independent testing. Key points:
l Innovative electronic design produces ‘visDIM’ with high frequency PWM control for smooth dimming and drastic reduction of flickering and strobing effects previously associated with LED dimming.
l Accredited independent photometric testing to IES LM79-08. l Global safety certification through CE, ETL and UL. l Comprehensive in-house testing by KKDC engineers through all stages of research, design and manufacture. l Rigorous five point quality control testing procedure integrated with automated SMD PCB production. l Extended duration and exhaustive thermal testing of finished products to verify stated product lifetimes and ambient temperature ranges in service.
8
Introduction
Introduction 9
series
TiMi 10
Linear
Linear 11
TiMi TiMi 352 /e352 5.52 W/m
24V DC
74.1 lm/W
150°
IP20
180°
TiMi 504 /e504 24V DC
E356145
12.24 W/m
150°
79.3 lm/W
150°
180°
150°
IP20
180°
150°
120°
120°
120°
90°
90°
90°
90°
90°
90°
100
200
60°
300 0° cd/klm
30°
200
60°
60°
300 30° C0/C180
C90/C270
100
0° cd/klm
30°
C90/C270
200
60°
60°
300 30° C0/C180
0° cd/klm
30°
C90/C270
409lm/m
971lm/m
1400lm/m
Luminous flux: 409lm/m nominal (@ 3200K)
Luminous flux: 970.6lm/m nominal (@ 3200K)
Luminous flux: 1399.7lm/m nominal (@ 3200K)
Size: H6.3/W8.9/L83.3-2000mm
Size: H6.3/W8.9/L100-2000mm
Size: H6.3/W8.9/L71.4-2000mm
Chip:
Chip:
Chip:
Toyoda Gosei
Toyoda Gosei
Toyoda Gosei
Beam angle: 115°
Beam angle: 100°
l 2 step package binning.
l 3 step package binning.
CRI:
≥90
CRI:
≥90
CRI:
≥90
l O ptimum colour consistency for high quality/close proximity lighting.
l Good colour consistency providing an economic choice when mounted over 300mm from the illuminated surface.
Lifetime:
50,000 hours @ 25°C
Lifetime:
50,000 hours @ 25°C
Lifetime:
50,000 hours @ 25°C
Operating temp:
Ta = -25 to 60°C (Tc max = 75°C)
Operating temp:
Ta = -25 to 50°C (Tc max = 70°C)
Operating temp:
Ta = -25 to 40°C (Tc max = 70°C)
IP rating:
IP20
IP rating:
IP20
IP rating:
IP20
Finish:
Silver anodised
Finish:
Silver anodised
Finish:
Silver anodised
l W hite: 2300K/2500K/2700K/3000K/ 3200K/3800K/5000K. Single colours: Red/Green/Blue/ Orange/Amber.
l White: 2300K/2500K/2700K/3000K/ 3200K/3800K/5000K.
Beam angle: 115°
Cover/Lens: N/A
Cover/Lens: N/A
Cover/Lens: N/A
Note: To avoid any visible colour differences we advise that s-line and e-line products should not share the same location.
Mounting: Surface mounting via clips
Mounting: Surface mounting via clips
Mounting: Surface mounting via clips
LED strip options
Connection: Hardwire tails or male/female connectors
Connection: Hardwire tails or male/female connectors
Connection: Hardwire tails or male/female connectors
Control: 1-10V/DMX (See visDIM range)
Control: 1-10V/DMX (See visDIM range)
Control: 1-10V/DMX (See visDIM range)
83.3 ~ 2000 8.9
KKRGB
Linear
100 ~ 2000 8.9
6.3
KK508/KKe508 6.3
KK504/KKe504
6.3
KK352/KKe352
12
150°
81 lm/W
120°
30° C0/C180
l Wide choice of colour temperatures; single colours, RGB, and variable XEN versions.
17.28 W/m
120°
60°
l Output options from 409 to 1400 lumens per metre with high colour rendering index (≥90).
24V DC
E356145
120°
100
l Discrete low profile housing for concealed illumination of architectural details.
IP20
TiMi 508 /e508
71.4 ~ 2000 8.9
KKXEN
Linear 13
TiMi RGB RGB 24V DC
TiMi XEN
15.6 W/m
Variable 24V DC
IP20
Estimated output distribution 150° 180°
TiMi Product Details
12.24 W/m
43.5 lm/w
Estimated output distribution 150° 180°
150°
IP20
150°
120°
120°
120°
120°
90°
90°
90°
90°
100
100
200
60°
60°
300 30° C0/C180
0° cd/klm
30°
200
60°
300 30° C0/C180
C90/C270
60°
0° cd/klm
30°
C90/C270
15.6W/m
532lm/m
Luminous flux: Red: 106.6lm/m Green: 289.8lm/m Blue: 38.3lm/m White: 418.4lm/m
Luminous flux: 532.4lm/m (White 2800K)
Size: H6.3/W8.9/L83.3-2000mm
Beam angle: 115°
Chip: Red Epistar/Green Samsung/Blue Samsung
Colour: White: 2800K continuously variable to amber
Chip:
CRI:
≥80 (White 2800K)
Colours: Red 620-628nm/Blue 459464nm/Green 521-527nm
50,000 hours @ 25°C
CRI:
N/A
Operating temp:
Ta = -25 to 50°C (Tc max = 75°C)
Lifetime:
50,000 hours @ 25°C
IP rating:
IP20
Operating temp:
Ta = -25 to 50°C (Tc max = 80°C)
Finish:
Silver anodised
IP rating:
IP20
Finish:
Silver anodised
Mounting: Surface mounting via clips
Connection: Hardwire tails or male/female connectors
1
2
Citizen
Lifetime:
Mounting: Surface mounting via clips
TiMi optimum heatsink design Innovative PCB design Compact TiMi male/female connectors Laser etched batch numbering TiMi 504 with fixing clips
Size: H6.3/W8.9/L100-2000mm
Beam angle: 115°
Cover/Lens: N/A
1. 2. 3. 4. 5.
3
Cover/Lens: N/A
Connection: Hardwire tails or male/female connectors Control: 1-10V/DMX (See visDIM range) 5
4
8.9
14
Linear
83.3 ~ 2000
6.3
6.3
Control: DMX (See visDIM range)
8.9
100 ~ 2000
Linear 15
Above: Mandarin Oriental, Bar 8, Paris Architect: Patrick Jouin Lighting Design: DPA Lighting Consultants (London) Photography: Jean Garcin Left: 52 Martin Place, Sydney Lighting Design: Point Of View Opposite page: Jimmy Choo, Selfridges, London Lighting Design: DPA Lighting Consultants (London)
16
Linear
Linear 17
TiMi Accessories Connectors (Continued)
10.4
Mounting Options
11.8
KKCP-01 (1no.)
KKCN-11
KKCN-24
KKCP-51 (500no.)
4 PIN RGB 300mm extension lead
4 PIN XEN 300mm extension lead
Clip (Allow 3 per metre) S/Steel finish
Connectors
visDIM Control Gear Options
IP67 100W 24V
IP20
Aluminium housing
Black plastic housing
L248/W73/H48mm
L164/W64/H34mm
KKCN-01 50mm pair
KKCN-07 50mm pair
KKPS-01 1-10V PSU
KKDM-04 1-10V
KKCN-03 300mm pair
KKCN-09 300mm pair
visDIM dimmable power supply
KKSC-03A DMX (Screw terminal)
2 PIN male + female connector set
4 PIN RGB male + female connector set
(See Control Gear)
KKSC-03B DMX (RJ45) visDIM dimming sub-controllers (See Control Gear)
KKCN-18 50mm pair
KKCN-06
KKCN-19 300mm pair
2 PIN 300mm extension lead
4 PIN XEN male + female connector set
18
Linear
Linear 19
TiMi 352
TiMi 504
TiMi 508
TiMi RGB
TiMi XEN
TiMi e352
TiMi e504
TiMi e508
TIS352
TIS504
TIS508
TIS501
TIS006
TIE352
TIE504
TIE508
N
n/a
n/a
2300K
N
2500K
S
n/a
n/a
2500K
S
2700K
A
n/a
n/a
2700K
A
3000K
P
n/a
n/a
3000K
P
3200K
B
n/a
n/a
3200K
B
3800K
C
n/a
n/a
3800K
C
5000K
D
n/a
n/a
5000K
D
Red
F
n/a
n/a
n/a
IP20
G
0
Green
n/a
n/a
n/a
Blue
H
n/a
n/a
01
Orange
I
n/a
n/a
02
n/a
50mm male + female connectors 300mm male + female connectors
n/a
Amber
J
n/a
n/a
03
n/a
300mm single tail
RGB
L
n/a
n/a
n/a
n/a
300mm double tail
04
Variable
M
n/a
n/a
n/a
n/a
Custom
00
IP20
0
24V
W
Volt
Connection
IP
LED Colour
2300K
83.3-2000mm 100-2000mm 71.4-2000mm 83.3mm increments 100mm increments 71.4mm increments
Length Availability
50mm male + female connectors 300mm male + female connectors
01
02
300mm single tail
03
TIE504
A
300mm double tail
04
TiMi e504
2700K
Custom
00
24V
W
Volt
Connection
IP
LED Colour
TiMi Code Table
Code Example:
0
01
W
1000
IP20 50mm 24V 1000mm male + female connectors
83.3-2000mm 100-2000mm 71.4-2000mm 83.3-2000mm 100-2000mm 83.3mm increments 100mm increments 71.4mm increments 83.3mm increments 100mm increments
Length Availability
Code Example:
20
TIS504
A
TiMi 504
2700K
Linear
0
01
W
1000
IP20 50mm 24V 1000mm male + female connectors
Linear 21
TiMi Click TiMi Click 506 /e506 10.8 W/m
24V DC
81.4 lm/W
150°
TiMi Click Product Details
IP20
180°
150°
120°
120°
90°
90° 100 200
60°
60°
300 30° C0/C180
0° cd/klm
30°
C90/C270
1
l A versatile light source for concealed linear illumination. l Dust covers, rotational fixing clips, push feed connectors and locking inline joints for easy installation and maintenance. l Up to 5m continuous run from a single power feed.
879lm/m Luminous flux: 879.1lm/m nominal (@ 3200K + Clear cover) Size: H12.1/W14.8/L125 or 500mm Chip:
Toyoda Gosei
Beam angle: 105° (Clear cover) l 2 step package binning.
l 3 step package binning.
CRI:
≥90
l O ptimum colour consistency for high quality/close proximity lighting.
l Good colour consistency providing an economic choice when mounted over 300mm from the illuminated surface.
Lifetime:
50,000 hours @ 25°C
Operating temp:
Ta = -25 to 50°C (Tc max = 73°C)
IP rating:
IP20
Finish:
Silver anodised
l W hite: 2300K/2500K/2700K/3000K/ 3200K/3800K/5000K. Single colours: Red/Green/Blue/ Orange/Amber.
l White: 2300K/2500K/2700K/3000K/ 3200K/3800K/5000K.
2 1. Push feed connector 2. TiMi Click 506 with clear cover 3. Inline connectors with joint bar for rigid electrical connection
Cover/Lens: Diffused/Clear Note: To avoid any visible colour differences we advise that s-line and e-line products should not share the same location.
Mounting: Surface mounting via clips or magnets Connection: Hardwire tail or push feed connector accessories Control: 1-10V/DMX (see visDIM range)
12.1
3a
3b
125 ~ 500 14.8
22
Linear
Linear 23
Above & Opposite page: Retail store, Edinburgh Lighting Design: DPA Lighting Consultants (London)
24
Linear
Linear 25
TiMi Click Accessories Mounting Options
visDIM Control Gear Options
17.1 14.8
13.8
18.8
IP67 100W 24V
IP20
Aluminium housing
Black plastic housing
L248/W73/H48mm
L164/W64/H34mm
TCFC-01
TCMS-01
KKPS-01 1-10V PSU
KKDM-04 1-10V
Clip (Allow 2 per 500mm)
Magnet fixing set (Allow 2 per 500mm)
visDIM dimmable power supply
KKSC-03A DMX (Screw terminal)
(See Control Gear)
KKSC-03B DMX (RJ45)
Clear plastic finish
Aluminium/Steel finish
visDIM dimming sub-controllers (See Control Gear)
2.5
TCJT-01
TCEC-01
Joint bar (Allow 1 per join)
End cap
Anodised aluminium finish
White plastic finish
Connectors
28
26
15
TCPF-01
TCTC-01
Push feed connector
1000mm tail connector
Linear
Linear 27
TiMi Click Code Table TiMi Click e506
TiMi Click 506
TCE506
2300K
N
2500K
S
2500K
S
2700K
A
2700K
A
3000K
P
3000K
P
3200K
B
3200K
B
3800K
C
3800K
C
5000K
D
5000K
D
Red
F
IP
IP20
0
Green
G
Blue
H
Volt
24V
W
Orange
I
Amber
J
IP
IP20
0
24V
W
Finishes
A
B
125mm & 500mm Modules only
Finishes
Length Availability Silver anodised Diffused cover Silver anodised Clear cover
A
B
Code Example:
125mm & 500mm Modules only
Length Availability Silver anodised Diffused cover Silver anodised Clear cover
LED Colour
N
LED Colour
2300K
Volt
TCS506
A
TCE506
A
0
W
TiMi Click e506
2700K
IP20
24V 500mm Silver anodised Diffused cover
500
Code Example:
28
A
TCS506
A
0
W
TiMi Click 506
2700K
IP20
24V 500mm Silver anodised Diffused cover
Linear
500
Linear 29
series
LiNi 30
Linear
Linear 31
LiNi-S LiNi-S 352 /e352 5.52 W/m
24V DC
≤60.9 lm/W
150°
LiNi-S 007 /e007
IP40
24V DC
E356145
180°
10.83 W/m
150°
≤51.1 lm/W
150°
90°
90°
90°
90°
90°
90°
200
60°
300 0° cd/klm
30°
0° cd/klm
30°
30° C0/C180
C90/C270
60°
300 0° cd/klm
30°
C90/C270
Luminous flux: 336.2lm/m nominal (@ 3200K + Clear cover)
Luminous flux: 553.4lm/m nominal (@ 3200K + Clear cover)
Luminous flux: 849.5lm/m nominal (@ 3200K + Clear cover)
Size: H14/W13/L97.3-2014mm
Size: H14/W13/L55.67-2014mm
Size: H14/W13/L114-2014mm
Chip:
Chip:
Chip:
Toyoda Gosei
Operating temp:
Toyoda Gosei
Toyoda Gosei
Beam angle: 105° (Clear cover)
Beam angle: 105° (Clear cover)
≥90
CRI:
≥90
CRI:
≥90
50,000 hours @ 25°C
Lifetime:
50,000 hours @ 25°C
Lifetime:
50,000 hours @ 25°C
Ta = -25 to 60°C (Tc max = 72°C)
Operating temp:
Ta = -25 to 50°C (Tc max = 69°C)
Operating temp:
Ta = -25 to 50°C (Tc max = 65°C)
IP rating:
IP40
IP rating:
IP40
IP rating:
IP40
Finish:
Silver anodised
Finish:
Silver anodised
Finish:
Silver anodised
Cover/Lens: Diffused/Clear/Prismatic
Cover/Lens: Diffused/Clear/Prismatic
Cover/Lens: Diffused/Clear/Prismatic
Mounting: Surface mounting via concealed clips
Mounting: Surface mounting via concealed clips
Mounting: Surface mounting via concealed clips
Connection: Hardwire tails or male/female connectors
Connection: Hardwire tails or male/female connectors
Connection: Hardwire tails or male/female connectors
Control: 1-10V/DMX (see visDIM range)
Control: 1-10V/DMX (see visDIM range)
Control: 1-10V/DMX (see visDIM range)
Cable exit
13 55.67 ~ 2014
6.5
97.3 ~ 2014
6.5
13
Cable exit 3
14
14
14
KK504/KKe504
6.5
Linear
30° C0/C180
200
60°
850lm/m
Lifetime:
KK508/KKe508
60°
300
553lm/m
CRI:
KK007/KKe007
200
60°
C90/C270
100
336lm/m
13
32
100
l Good colour consistency providing an economic choice when mounted over 300mm from the illuminated surface.
KK352/KKe352
150°
120°
l O ptimum colour consistency for high quality/close proximity lighting.
LED strip options
180°
120°
Beam angle: 110° (Clear cover)
Note: To avoid any visible colour differences we advise that s-line and e-line products should not share the same location.
E356145
120°
l 3 step package binning.
l White: 2300K/2500K/2700K/3000K/ 3200K/3800K/5000K.
150°
IP40
120°
l 2 step package binning.
l W hite: 2300K/2500K/2700K/3000K/ 3200K/3800K/5000K. Single colours: Red/Green/Blue/ Orange/Amber.
150°
≤69.4 lm/W
120°
30° C0/C180
l Concealed clip mounting for clean lines, with a range of cover options.
12.24 W/m
24V DC
120°
60°
l Output options from 336 to 1217 lumens per metre with ≥90 CRI.
IP40
180°
100
l A compact surface mounted linear profile for our full range of linear LED sources
LiNi-S 504 /e504
Cable exit 3
114 ~ 2014
KKRGB
Linear 33
LiNi-S 508 /e508 17.28 W/m
24V DC
≤70.4 lm/W
150°
LiNi-S RGB
IP40
180°
RGB 24V DC
LiNi-S Product Details
15.6 W/m
IP40
Estimated output distribution 150° 180°
150°
150°
120°
120°
120°
120°
90°
90°
90°
90° 100
100 200
60°
300 30° C0/C180
0° cd/klm
30°
200
60°
60°
30° C0/C180
C90/C270
60°
300 0° cd/klm
30°
C90/C270
1217lm/m
15.6W/m
Luminous flux: 1216.5lm/m nominal (@ 3200K + Clear cover)
Luminous flux: Red: 93.9lm/m Green: 252.2lm/m Blue: 31.9lm/m White: 366.8lm/m
Size: H14/W13/L85.4-2014mm Chip:
Toyoda Gosei
Beam angle: 105° (Clear cover)
2
Size: H14/W13/L97.3-2014mm
CRI:
≥90
Chip: Red Epistar/Green Samsung/Blue Samsung
Lifetime:
50,000 hours @ 25°C
Beam angle: 110° (Clear cover)
Operating temp:
Ta = -25 to 45°C (Tc max = 78°C)
IP rating:
IP40
Colours: Red 620-628nm/Blue 459464nm/Green 521-527nm (5nm tolerance)
Finish:
Silver anodised
CRI:
N/A
Cover/Lens: Diffused/Clear/Prismatic
Lifetime:
50,000 hours @ 25°C
Mounting: Surface mounting via concealed clips
Operating temp:
Ta = -25 to 50°C (Tc max = 76°C)
Connection: Hardwire tails or male/female connectors
IP rating:
IP40
Finish:
Silver anodised
Control: 1-10V/DMX (see visDIM range)
Cover/Lens: Diffused/Clear/Prismatic
3
Mounting: Surface mounting via concealed clips Connection: Hardwire tails or male/female connectors
1. Concealed fixing clip 2. LiNi-S e504 with clear cover 3. Optional cable exit end cap
14
14
Control: DMX (see visDIM range)
Linear
13
Cable exit 3
85.4 ~ 2014
6.5
6.5
13
34
1
Cable exit 3
97.3 ~ 2014
Linear 35
Above: Beach Pavilions, Waiheke Island Architect: Young+Richards KKDC New Zealand Photography: Simon Devitt Opposite page: The Darling Hotel Lobby, Sydney Lighting Design: Point Of View
36
Linear
Linear 37
LiNi-S Accessories Mounting Options
visDIM Control Gear Options
13
14.2
IP67 100W 24V
IP20
Aluminium housing
Black plastic housing
L248/W73/H48mm
L164/W64/H34mm
KKCP-10
KKPS-01 1-10V PSU
KKDM-04 1-10V
Concealed Clip (Allow 3 per metre)
visDIM dimmable power supply
KKSC-03A DMX (Screw terminal)
(See Control Gear)
KKSC-03B DMX (RJ45)
S/Steel finish
visDIM dimming sub-controllers (See Control Gear)
Connectors
38
KKCN-01 50mm pair
KKCN-07 50mm pair
KKCN-03 300mm pair
KKCN-09 300mm pair
2 PIN male + female connector set
4 PIN RGB male + female connector set
KKCN-06
KKCN-11
2 PIN 300mm extension lead
4 PIN RGB 300mm extension lead
Linear
Linear 39
LiNi-S Code Table
LiNi-S 352
LiNi-S 007
LiNi-S 504
LiNi-S 508
LiNi-S RGB
LiNi-S e352 LiNi-S e007 LiNi-S e504 LiNi-S e508
LSS352 LSS007 LSS504 LSS508 LSS501
n/a
2300K
N
2500K
S
n/a
2500K
S
2700K
A
n/a
2700K
A
3000K
P
n/a
3000K
P
3200K
B
n/a
3200K
B
3800K
C
n/a
3800K
C
5000K
D
n/a
5000K
D
Red
F
n/a
n/a
IP40
G
1
Green
n/a
n/a
Blue
H
n/a
n/a
01
Orange
I
n/a
n/a
50mm male + female connectors 300mm male + female connectors
02
Amber
J
n/a
n/a
300mm single tail
03
RGB
L
n/a
n/a
n/a
n/a
300mm double tail
04
1000mm single tail
IP40
1
12
Custom
00
50mm male + female connectors 300mm male + female connectors
01
24V
02
W
300mm single tail
03
300mm double tail
04
1000mm single tail
12
Custom
00
24V
W
114-2014mm 85.4-2014mm 97.3-2014mm 97.3-2014mm 55.67-2014mm 83.3mm increments 41.67mm increments 100mm increments 71.4mm increments 83.3mm increments
A
B
K
97.3-2014mm 55.67-2014mm 114-2014mm 85.4-2014mm 83.3mm increments 41.67mm increments 100mm increments 71.4mm increments
IP Connection Volt
Length Availability Finishes
IP Connection Volt
Silver anodised Diffused cover Silver anodised Clear cover Silver anodised Prismatic cover
LED Colour
N
LED Colour
2300K
Length Availability Finishes
LSE352 LSE007 LSE504 LSE508
Silver anodised Diffused cover Silver anodised Clear cover Silver anodised Prismatic cover
A
B
K
Code Example:
LSE504 LiNi-S e504
A
1
02
W
2014
A
2700K IP40 300mm 24V 2014mm Silver anodised male + female Diffused cover connectors
Code Example:
LSS504 LiNi-S 504
40
Linear
A
1
02
W
2014
A
2700K IP40 300mm 24V 2014mm Silver anodised male + female Diffused cover connectors
Linear 41
LiNi Glow LiNi Glow 007 /e007 24V DC
10.83 W/m
43.3 lm/W
150°
IP40
180°
LiNi Glow 508 /e508 17.28 W/m
24V DC
150°
59.2 lm/W
150°
120°
120°
120°
90°
90°
90°
180°
90° 100
200
400 0° cd/klm
200
60°
60°
300 30°
30° C0/C180
C90/C270
0° cd/klm
30°
C90/C270
l Compact surface mounted linear profile with even diffusion, viewed from 180 degrees.
469lm/m
1023lm/m
l 469 or 1023 lumens per metre output with (≥90 CRI).
Luminous flux: 468.9lm/m nominal (@ 3200K)
Luminous flux: 1023lm/m nominal (@ 3200K)
Size: H19/W13/L55.67-2014mm
Size: H19/W13/L85.4-2014mm
Chip:
Chip:
l Homogenous face to suit recessed, concealed clip mounting.
Toyoda Gosei
Toyoda Gosei
Beam angle: Diffused
Beam angle: Diffused
l 2 step package binning.
l 3 step package binning.
CRI:
≥90
CRI:
≥90
l O ptimum colour consistency for high quality/close proximity lighting.
l Good colour consistency providing an economic choice when mounted over 300mm from the illuminated surface.
Lifetime:
50,000 hours @ 25°C
Lifetime:
50,000 hours @ 25°C
Operating temp:
Ta = -25 to 55°C (Tc max = 73°C)
Operating temp:
Ta = -25 to 45°C (Tc max = 78°C)
IP rating:
IP40
IP rating:
IP40
Finish:
Silver anodised
Finish:
Silver anodised
l W hite: 2300K/2500K/2700K/3000K/ 3200K/3800K/5000K. Single colours: Red/Green/Blue/ Orange/Amber.
l White: 2300K/2500K/2700K/3000K/ 3200K/3800K/5000K.
Note: To avoid any visible colour differences we advise that s-line and e-line products should not share the same location.
LED strip options
Cover/Lens: Diffused
Cover/Lens: Diffused
Mounting: Surface mounting via concealed clips
Mounting: Surface mounting via concealed clips
Connection: Hardwire tails or male/female connectors
Connection: Hardwire tails or male/female connectors
Control: 1-10V/DMX (see visDIM range)
Control: 1-10V/DMX (see visDIM range)
19
KK508/KKe508 19 6.5
13
Linear
13
Cable exit 55.67 ~ 2014
6.5
KK007/KKe007
42
60°
300 30° C0/C180
150°
120°
100 60°
IP40
Cable exit 3
85.4 ~ 2014
Linear 43
LiNi Glow Product Details
1
1. Concealed fixing clip 2. Optional cable exit end cap 3. LiNi Glow 007 for homogenous lighting
44
Linear
2
3
FC 200, London Architect: John Robertson Architects Lighting Design: Cundall Light4
Linear 45
LiNi Glow Accessories Mounting Options
visDIM Control Gear Options
13
19.3
IP67 100W 24V
IP20
Aluminium housing
Black plastic housing
L248/W73/H48mm
L164/W64/H34mm
KKCP-10
KKPS-01 1-10V PSU
KKDM-04 1-10V
Concealed Clip (Allow 3 per metre)
visDIM dimmable power supply
KKSC-03A DMX (Screw terminal)
(See Control Gear)
KKSC-03B DMX (RJ45)
S/Steel finish
visDIM dimming sub-controllers (See Control Gear)
Connectors
46
KKCN-01 50mm pair
KKCN-07 50mm pair
KKCN-03 300mm pair
KKCN-09 300mm pair
2 PIN male + female connector set
4 PIN RGB male + female connector set
KKCN-06
KKCN-11
2 PIN 300mm extension lead
4 PIN RGB 300mm extension lead
Linear
Linear 47
LiNi Glow Code Table LiNi Glow 007
LiNi Glow 508
2300K
N
2500K
S
2500K
S
2700K
A
2700K
A
3000K
P
3000K
P
3200K
B
3200K
B
3800K
C
3800K
C
5000K
D
5000K
D
Red
F
n/a
IP40
G
1
Green
n/a
Blue
H
n/a
01
Orange
I
n/a
50mm male + female connectors 300mm male + female connectors
02
Amber
J
n/a
300mm single tail
03
300mm double tail
IP40
1
04
1000mm single tail
12
50mm male + female connectors 300mm male + female connectors
01
Custom
00
02
24V
W
300mm single tail
03
300mm double tail
04
1000mm single tail
12
Custom
00
24V
W
55.67-2014mm 85.4-2014mm 41.67mm increments 71.4mm increments
Silver anodised Diffused U cover
U
55.67-2014mm 85.4-2014mm 41.67mm increments 71.4mm increments
IP Connection Volt
Length Availability Finish
IP
Length Availability
LED Colour
N
LED Colour
2300K
Volt
Connection
LiNi Glow e508
LGE007 LGE508
LGS007 LGS508
Finish
LiNi Glow e007
Silver anodised Diffused U cover
U
Code Example:
LGE508
A
LiNi Glow e508
2700K
1
02
W
2014
U
IP40 300mm 24V 2014mm Silver anodised male + female Diffused U cover connectors
Code Example:
48
LGS508
A
LiNi Glow 508
2700K
Linear
1
02
W
2014
U
IP40 300mm 24V 2014mm Silver anodised Diffused U cover male + female connectors
Linear 49
LiNi-R LiNi-R 352 /e352 5.52 W/m
24V DC
23.9 lm/W
150°
LiNi-R 504 /e504
IP40
180°
24V DC
12.24 W/m
28.5 lm/W
150°
150°
120°
120°
90°
90°
200 300 30° C0/C180
l Output options from 132 to 448 lumens per metre with ≥90 CRI. l Available with a full range of high CRI white, single colour, and RGB LED sources.
l 2 step package binning.
l 3 step package binning.
l O ptimum colour consistency for high quality/close proximity lighting.
l Good colour consistency providing an economic choice when mounted over 300mm from the illuminated surface. l White: 2300K/2500K/2700K/3000K/ 3200K/3800K/5000K.
Note: To avoid any visible colour differences we advise that s-line and e-line products should not share the same location.
LED strip options
IP40
Estimated output distribution 150° 180°
150°
150°
120°
120°
120°
120°
90°
90°
90°
90°
90°
90°
60°
100
100
200
200
60°
300 30° C0/C180
0° cd/klm
30°
60°
60°
300 30° C0/C180
C90/C270
100
0° cd/klm
30°
200
60°
30° C0/C180
C90/C270
60°
300 0° cd/klm
30°
132lm/m
349lm/m
448lm/m
15.6W/m
Luminous flux: 131.9lm/m nominal (@ 3200K)
Luminous flux: 348.8lm/m nominal (@ 3200K)
Luminous flux: 4 47.6lm/m nominal (@ 3200K)
Size: H42.7/W25.8/L100.3-2017mm (Excludes spring clips)
Size: H42.7/W25.8/L117-2017mm (Excludes spring clips)
Size: H42.7/W25.8/L88.4-2017mm (Excludes spring clips)
Luminous flux: Red: 26.3lm/m Green: 81.7lm/m Blue: 10.5lm/m White: 125lm/m
Chip:
Chip:
Chip:
Toyoda Gosei
Toyoda Gosei
Toyoda Gosei
C90/C270
Size: H42.7/W25.8/L100.3-2017mm (Excludes spring clips)
Beam angle: Diffused
Beam angle: Diffused
Beam angle: Diffused
CRI:
≥90
CRI:
≥90
CRI:
≥90
Chip: Red Epistar/Green Samsung/Blue Samsung
Lifetime:
50,000 hours @ 25°C
Lifetime:
50,000 hours @ 25°C
Lifetime:
50,000 hours @ 25°C
Beam angle: Diffused
Operating temp:
Ta = -25 to 60°C (Tc max = 70°C)
Operating temp:
Ta = -25 to 55°C (Tc max = 70°C)
Operating temp:
Ta = -25 to 45°C (Tc max = 60°C)
IP rating:
IP40
IP rating:
IP40
IP rating:
IP40
Colours: Red 620-628nm/Blue 459464nm/Green 521-527nm (5nm tolerance)
Finish:
Silver anodised
Finish:
Silver anodised
Finish:
Silver anodised
Cover/Lens: Diffused
Cover/Lens: Diffused
Cover/Lens: Diffused
Mounting: Recessed mounting via spring clips
Mounting: Recessed mounting via spring clips
Mounting: Recessed mounting via spring clips
Connection: Hardwire tails or male/female connectors
Connection: Hardwire tails or male/female connectors
Connection: Hardwire tails or male/female connectors
Control: 1-10V/DMX (see visDIM range)
Control: 1-10V/DMX (see visDIM range)
Control: 1-10V/DMX (see visDIM range)
CRI:
N/A
Lifetime:
50,000 hours @ 25°C
Operating temp:
Ta = -25 to 55°C (Tc max = 74°C)
IP rating:
IP40
Finish:
Silver anodised
Cover/Lens: Diffused Mounting: Recessed mounting via spring clips Connection: Hardwire tails or male/female connectors
KK508/KKe508
Control: DMX (see visDIM range) Cable exit
100.3 ~ 2017
59.4
20 63.8
20 63.8
25.8
25.8
25.8
20 63.8
Cut out: 20mm x (Product overall length - 4mm)
Cable exit
Cable exit
42.7
59.4
42.7
59.4
Linear
15.6 W/m
120°
C90/C270
20 63.8
50
180°
RGB 24V DC
120°
Cable exit
KKRGB
150°
IP40
42.7
KK504/KKe504
25.9 lm/W
25.8
KK352/KKe352
30°
17.28 W/m
150°
59.4
l W hite: 2300K/2500K/2700K/3000K/ 3200K/3800K/5000K. Single colours: Red/Green/Blue/ Orange/Amber.
0° cd/klm
24V DC
LiNi-R RGB
117 ~ 2017 Cut out: 20mm x (Product overall length - 4mm)
42.7
l Recessed, slim aperture, linear profile with spring clip retainers.
60°
IP40
180°
100 60°
LiNi-R 508 /e508
88.4 ~ 2017 Cut out: 20mm x (Product overall length - 4mm)
100.3 ~ 2017 Cut out: 20mm x (Product overall length - 4mm)
Linear 51
LiNi-R Product Details
2
1
3
5
4
1-28mm
126mm spring clip spread with 28mm board
1. 2. 3. 4. 5.
52
18-20mm Cut out
LiNi-R with diffused cover for homogenous lighting Slide on spring fixings Cable exit from end cap Recessed LiNi-R profile Typical recessed installation
Linear
Linear 53
LiNi-R Accessories Connectors
visDIM Control Gear Options
IP67 100W 24V
IP20
Aluminium housing
Black plastic housing
L248/W73/H48mm
L164/W64/H34mm
KKCN-01 50mm pair
KKCN-07 50mm pair
KKPS-01 1-10V PSU
KKDM-04 1-10V
KKCN-03 300mm pair
KKCN-09 300mm pair
visDIM dimmable power supply
KKSC-03A DMX (Screw terminal)
2 PIN male + female connector set
4 PIN RGB male + female connector set
(See Control Gear)
KKSC-03B DMX (RJ45) visDIM dimming sub-controllers (See Control Gear)
54
KKCN-06
KKCN-11
2 PIN 300mm extension lead
4 PIN RGB 300mm extension lead
Linear
Linear 55
LiNi-R Code Table
LiNi-R 508
LiNi-R RGB
LRS352
LRS504
LRS508
LRS501
LiNi-R e352 LiNi-R e504 LiNi-R e508
LRE352
LRE504
LRE508
n/a
2300K
N
2500K
S
n/a
2500K
S
2700K
A
n/a
2700K
A
3000K
P
n/a
3000K
P
3200K
B
n/a
3200K
B
3800K
C
n/a
3800K
C
5000K
D
n/a
5000K
D
Red
F
n/a
n/a
IP40
1
Green
G
n/a
n/a
Blue
H
n/a
01
Orange
I
n/a
02
n/a
50mm male + female connectors 300mm male + female connectors
n/a
Amber
J
n/a
300mm single tail
03
n/a
RGB
L
n/a
n/a
n/a
300mm double tail
04
1000mm single tail
1
12
IP40
Custom
00
50mm male + female connectors 300mm male + female connectors
01
24V
W
02
300mm single tail
03
300mm double tail
04
1000mm single tail
12
Custom
00
24V
W
100.3-2017mm 117-2017mm 88.4-2017mm 100.3-2017mm 83.3mm increments 100mm increments 71.4mm increments 83.3mm increments
A
100.3-2017mm 117-2017mm 88.4-2017mm 83.3mm increments 100mm increments 71.4mm increments
IP Connection Volt
Length Availability Finish
IP
Silver anodised Diffused cover
LED Colour
LED Colour
N
Volt
Connection
LiNi-R 504
2300K
Length Availability Finish
LiNi-R 352
Silver anodised Diffused cover
A
Code Example:
LRE504
A
LiNi-R e504
2700K
1
02
W
2017
A
IP40 300mm 24V 2017mm Silver anodised male + female Diffused cover connectors
Code Example:
LRS504 LiNi-R 504
56
Linear
A
1
02
W
2017
A
2700K IP40 300mm 24V 2017mm Silver anodised Diffused cover male + female connectors
Linear 57
series Linear
LiNi XL
58
Linear 59
LiNi-S XL LiNi-S XL 352 /e352 24V DC
5.52 W/m
≤42.1 lm/W
150°
IP40
180°
LiNi-S XL 504 /e504 24V DC
12.24 W/m
≤46.1 lm/W
150°
150°
120°
120°
90°
90°
180°
60°
400 600 0° cd/klm
30° C0/C180
30°
24V DC
100 200 300 400 500 30° C0/C180
C90/C270
0° cd/klm
120°
120°
90°
90°
60°
30°
≤47 lm/W
150°
90°
60°
17.28 W/m
150°
120°
200 60°
IP40
LiNi-S XL 508 /e508
RGB 24V DC
0° cd/klm
120°
120°
90°
90°
60°
30°
15.6 W/m
IP40
Estimated output distribution 150° 180°
150°
100 200 300 400 500 30° C0/C180
C90/C270
IP40
180°
60°
LiNi-S XL RGB
120°
90° 100 200 300 400 500
60°
30° C0/C180
C90/C270
150°
0° cd/klm
60°
30°
C90/C270
l A compact, extensible, interior profile with homogenous diffusion for all our SMD linear LED sources
232lm/m
564lm/m
812lm/m
15.6W/m
l Output options from 232 to 812 lumens per metre with ≥90 CRI.
Luminous flux: 232.4lm/m nominal (@ 3200K + Clear cover)
Luminous flux: 564.3lm/m nominal (@ 3200K + Clear cover)
Luminous flux: 812.2lm/m nominal (@ 3200K + Clear cover)
Size: H28/W22/L94.3-2011mm
Size: H28/W22/L111-2011mm
Size: H28/W22/L82.4-2011mm
Chip:
Chip:
Chip:
Luminous flux: Red: 63.4lm/m Green: 169.3lm/m Blue: 19.4lm/m White: 254lm/m
l Surface mounted via concealed clips or optional snap on cable channel.
Toyoda Gosei
Toyoda Gosei
Toyoda Gosei
Beam angle: 50° (Clear cover)
Beam angle: 50° (Clear cover)
Beam angle: 50° (Clear cover)
Size: H28/W22/L94.3-2011mm
l 2 step package binning.
l 3 step package binning.
CRI:
≥90
CRI:
≥90
CRI:
≥90
Chip: Red Epistar/Green Samsung/Blue Samsung
l O ptimum colour consistency for high quality/close proximity lighting.
l Good colour consistency providing an economic choice when mounted over 300mm from the illuminated surface.
Lifetime:
50,000 hours @ 25°C
Lifetime:
50,000 hours @ 25°C
Lifetime:
50,000 hours @ 25°C
Beam angle: 50° (Clear cover)
Operating temp:
Ta = -25 to 60°C (Tc max = 66°C)
Operating temp:
Ta = -25 to 50°C (Tc max = 62.8°C)
Operating temp:
Ta = -25 to 45°C (Tc max = 61.5°C)
Colours: Red 620-628nm/Blue 459464nm/Green 521-527nm
IP rating:
IP40
IP rating:
IP40
IP rating:
IP40
CRI:
N/A
Finish:
Silver anodised
Finish:
Silver anodised
Finish:
Silver anodised
Lifetime:
50,000 hours @ 25°C
Operating temp:
Ta = -25 to 60°C (Tc max = 72.5°C)
IP rating:
IP40
Finish:
Silver anodised
l W hite: 2300K/2500K/2700K/3000K/ 3200K/3800K/5000K. Single colours: Red/Green/Blue/ Orange/Amber.
l White: 2300K/2500K/2700K/3000K/ 3200K/3800K/5000K.
Cover/Lens: Diffused/Clear
Cover/Lens: Diffused/Clear
Cover/Lens: Diffused/Clear
Note: To avoid any visible colour differences we advise that s-line and e-line products should not share the same location.
Mounting: Surface mounting via concealed clips or cable raceway
Mounting: Surface mounting via concealed clips or cable raceway
Mounting: Surface mounting via concealed clips or cable raceway
LED strip options
Connection: Hardwire tails or male/female connectors
Connection: Hardwire tails or male/female connectors
Connection: Hardwire tails or male/female connectors
Control: 1-10V/DMX (see visDIM range)
Control: 1-10V/DMX (see visDIM range)
Control: 1-10V/DMX (see visDIM range)
Cover/Lens: Diffused/Clear Mounting: Surface mounting via concealed clips or cable raceway Connection: Hardwire tails or male/female connectors
KK508/KKe508
Control: DMX (see visDIM range)
Linear
2.25
94.3 ~ 2011
22
Cable exit 11
11
11
60
22
Cable exit
2.25
111 ~ 2011
Cable exit 11
22
Cable exit
28
28 22
KKRGB
28
KK504/KKe504
28
KK352/KKe352
2.25
82.4 ~ 2011
2.25
94.3 ~ 2011
Linear 61
LiNi-S XL Product Details
1
2
1. Screw-on plastic end cap 2. Snap-in cable raceway channel 3. Diffused cover for homogenous lighting with all LED strip options 4. LiNi-S XL 504 with clear cover
4
3
House of Stone, Milan John Pawson/Salvatori
62
Linear
Linear 63
LiNi-S XL Accessories Mounting Options
Connectors (continued) 22
28
36.4
22
KKCP-11
KKCR-01-1000 1000mm
KKCN-06
KKCN-11
Concealed Clip (Allow 3 per metre)
KKCR-01-2000 2000mm
2 PIN 300mm extension lead
4 PIN RGB 300mm extension lead
S/Steel finish
Cable Raceway*
KKCR-01-3000 3000mm Anodised aluminium finish * Cut & drilled to fit on site visDIM Control Gear Options
IP67
KKJT-02 Joining Bar (Allow 1 per join) Anodised aluminium finish
Connectors
100W 24V
IP20
Aluminium housing
Black plastic housing
L248/W73/H48mm
L164/W64/H34mm
KKPS-01 1-10V PSU
KKDM-04 1-10V
visDIM dimmable power supply
KKSC-03A DMX (Screw terminal)
(See Control Gear)
KKSC-03B DMX (RJ45) visDIM dimming sub-controllers (See Control Gear)
64
KKCN-01 50mm pair
KKCN-07 50mm pair
KKCN-03 300mm pair
KKCN-09 300mm pair
2 PIN male + female connector set
4 PIN RGB male + female connector set
Linear
Linear 65
LiNi-S XL Code Table LiNi-S XL 352
LiNi-S XL 504
LiNi-S XL 508
LiNi-S XL RGB
SXS352 SXS504 SXS508 SXS501
LiNi-S XL e508
SXE352 SXE504 SXE508
n/a
2300K
N
2500K
S
n/a
2500K
S
2700K
A
n/a
2700K
A
3000K
P
n/a
3000K
P
3200K
B
n/a
3200K
B
3800K
C
n/a
3800K
C
5000K
D
n/a
5000K
D
Red
F
n/a
n/a
IP40
G
1
Green
n/a
n/a
Blue
H
n/a
n/a
300mm male + female connectors
02
Orange
I
n/a
n/a
300mm single tail
03
Amber
J
n/a
n/a
300mm double tail
04
RGB
L
n/a
n/a
n/a
1000mm single tail
12
Custom
1
00
300mm male + female connectors
24V
02
W
300mm single tail
03
300mm double tail
04
1000mm single tail
12
Custom
00
24V
W
Silver anodised Diffused cover Silver anodised Clear cover
94.3-2011mm 111-2011mm 82.4-2011mm 94.3-2011mm 83.3mm increments 100mm increments 71.4mm increments 83.3mm increments
A
B
IP Connection Volt
94.3-2011mm 111-2011mm 82.4-2011mm 83.3mm increments 100mm increments 71.4mm increments
Length Availability Finishes
IP
IP40
LED Colour
LED Colour
N
Volt
Connection
LiNi-S XL e504
2300K
Length Availability Finishes
LiNi-S XL e352
Silver anodised Diffused cover Silver anodised Clear cover
A
B
Code Example:
SXE504 LiNi-S XL e504
A
1
02
W
2011
A
2700K IP40 300mm 24V 2011mm Silver anodised male + female Diffused cover connectors
Code Example:
SXS504
A
1
02
W
2011
A
LiNi-S XL 504 2700K IP40 300mm 24V 2011mm Silver anodised male + female Diffused cover connectors
66
Linear
Linear 67
LiNi Glow XL LiNi Glow XL 352 /e352 24V DC
5.52 W/m
46.3 lm/W
150°
IP40
180°
LiNi Glow XL 504 /e504 24V DC
12.24 W/m
50 lm/W
150°
150°
120°
120°
90°
90°
180°
100 60°
150 0° cd/klm
17.28 W/m
150°
49.1 lm/W
150°
180°
RGB 24V DC
15.6 W/m
IP40
Estimated output distribution 150° 180°
150°
150°
120°
120°
120°
120°
90°
90°
90°
90°
90°
90°
60°
50
50
50
100
100
100
60°
150
60°
30° C0/C180
C90/C270
0° cd/klm
60°
150
200 30°
IP40
120°
200 30° C0/C180
24V DC
LiNi Glow XL RGB
120°
50 60°
IP40
LiNi Glow XL 508 /e508
60°
200 30°
30° C0/C180
C90/C270
0° cd/klm
60°
150 200
30°
30° C0/C180
C90/C270
0° cd/klm
30°
C90/C270
l A compact, extensible, linear profile with homogenous diffusion, viewed from 180 degrees.
256lm/m
612lm/m
849lm/m
15.6W/m
l 256 or 849 lumens per metre output with (≥90 CRI).
Luminous flux: 255.6lm/m nominal (@ 3200K + Clear cover)
Luminous flux: 612lm/m nominal (@ 3200K + Clear cover)
Luminous flux: 848.5lm/m nominal (@ 3200K + Clear cover)
Size: H28/W22/L94.3-2011mm
Size: H28/W22/L111-2011mm
Size: H28/W22/L82.4-2011mm
Chip:
Chip:
Chip:
Luminous flux: Red: 71.8lm/m Green: 191.7lm/m Blue: 24.8lm/m White: 284.4lm/m
l Surface mounted via concealed clips or optional snap on cable channel.
Toyoda Gosei
Toyoda Gosei
Toyoda Gosei
Beam angle: Diffused
Beam angle: Diffused
Beam angle: Diffused
Size: H28/W22/L94.3-2011mm
l 2 step package binning.
l 3 step package binning.
CRI:
≥90
CRI:
≥90
CRI:
≥90
Chip: Red Epistar/Green Samsung/Blue Samsung
l O ptimum colour consistency for high quality/close proximity lighting.
l Good colour consistency providing an economic choice when mounted over 300mm from the illuminated surface.
Lifetime:
50,000 hours @ 25°C
Lifetime:
50,000 hours @ 25°C
Lifetime:
50,000 hours @ 25°C
Beam angle: Diffused
Operating temp:
Ta = -25 to 60°C (Tc max = 67°C)
Operating temp:
Ta = -25 to 60°C (Tc max = 72°C)
Operating temp:
Ta = -25 to 50°C (Tc max = 63°C)
Colours: Red 620-628nm/Blue 459464nm/Green 521-527nm
IP rating:
IP40
IP rating:
IP40
IP rating:
IP40
CRI:
N/A
Finish:
Silver anodised
Finish:
Silver anodised
Finish:
Silver anodised
Lifetime:
50,000 hours @ 25°C
Operating temp:
Ta = -25 to 55°C (Tc max = 70°C)
IP rating:
IP40
Finish:
Silver anodised
l W hite: 2300K/2500K/2700K/3000K/ 3200K/3800K/5000K. Single colours: Red/Green/Blue/ Orange/Amber.
l White: 2300K/2500K/2700K/3000K/ 3200K/3800K/5000K.
Cover/Lens: Diffused
Cover/Lens: Diffused
Cover/Lens: Diffused
Note: To avoid any visible colour differences we advise that s-line and e-line products should not share the same location.
Mounting: Surface mounting via concealed clips or cable raceway
Mounting: Surface mounting via concealed clips or cable raceway
Mounting: Surface mounting via concealed clips or cable raceway
LED strip options
Connection: Hardwire tails or male/female connectors
Connection: Hardwire tails or male/female connectors
Connection: Hardwire tails or male/female connectors
Control: 1-10V/DMX (see visDIM range)
Control: 1-10V/DMX (see visDIM range)
Control: 1-10V/DMX (see visDIM range)
Cover/Lens: Diffused Mounting: Surface mounting via concealed clips or cable raceway Connection: Hardwire tails or male/female connectors
KK508/KKe508
Control: DMX (see visDIM range)
Linear
94.3 ~ 2011
22
Cable exit 11
11 2.25
68
22
Cable exit 2.25
111 ~ 2011
Cable exit
11
22
28
28 Cable exit
11
22
KKRGB
28
KK504/KKe504
28
KK352/KKe352
2.25
82.4 ~ 2011
2.25
94.3 ~ 2011
Linear 69
LiNi Glow XL Product Details
6a
1
2
6b 2
3 1. Surface mounted LiNi Glow XL 2. Homogenous lighting with 155째 distribution 3. Screw-fit plastic end caps 4. Optional joining bar accessory 5. Snap-in cable raceway channel 6. Easy snap-fit flush mounting clips
5
70
Linear
4
Soho Square, London Design: Dealerward Ltd
Linear 71
LiNi Glow XL Accessories Mounting Options
Connectors (continued) 22
28
36.4
22
KKCP-11
KKCR-01-1000 1000mm
KKCN-06
KKCN-11
Concealed Clip (Allow 3 per metre)
KKCR-01-2000 2000mm
2 PIN 300mm extension lead
4 PIN RGB 300mm extension lead
S/Steel finish
Cable Raceway*
KKCR-01-3000 3000mm Anodised aluminium finish * Cut & drilled to fit on site visDIM Control Gear Options
IP67
KKJT-02 Joining Bar (Allow 1 per join) Anodised aluminium finish
Connectors
100W 24V
IP20
Aluminium housing
Black plastic housing
L248/W73/H48mm
L164/W64/H34mm
KKPS-01 1-10V PSU
KKDM-04 1-10V
visDIM dimmable power supply
KKSC-03A DMX (Screw terminal)
(See Control Gear)
KKSC-03B DMX (RJ45) visDIM dimming sub-controllers (See Control Gear)
72
KKCN-01 50mm pair
KKCN-07 50mm pair
KKCN-03 300mm pair
KKCN-09 300mm pair
2 PIN male + female connector set
4 PIN RGB male + female connector set
Linear
Linear 73
LiNi Glow XL Code Table LiNi Glow XL 352
LiNi Glow XL 504
LiNi Glow XL 508
LiNi Glow XL RGB
LiNi Glow XL e508
n/a
2300K
N
2500K
S
n/a
2500K
S
2700K
A
n/a
2700K
A
3000K
P
n/a
3000K
P
3200K
B
n/a
3200K
B
3800K
C
n/a
3800K
C
5000K
D
n/a
5000K
D
Red
F
n/a
n/a
IP40
G
1
Green
n/a
n/a
Blue
H
n/a
n/a
300mm male + female connectors
02
Orange
I
n/a
n/a
300mm single tail
03
Amber
J
n/a
n/a
300mm double tail
04
RGB
L
n/a
n/a
n/a
1000mm single tail
12
Custom
1
00
300mm male + female connectors
24V
02
W
300mm single tail
03
300mm double tail
04
1000mm single tail
12
Custom
00
24V
W
U
IP Connection Volt
94.3-2011mm 111-2011mm 82.4-2011mm 83.3mm increments 100mm increments 71.4mm increments
Length Availability Silver anodised Diffused U cover
U
Code Example:
94.3-2011mm 111-2011mm 82.4-2011mm 94.3-2011mm 83.3mm increments 100mm increments 71.4mm increments 83.3mm increments
Length Availability Silver anodised Diffused U cover
Finish
IP
IP40
LED Colour
N
LED Colour
2300K
Volt
Connection
LiNi Glow XL e504
GXE352 GXE504 GXE508
GXS352 GXS504 GXS508 GXS501
Finish
LiNi Glow XL e352
GXE504
A
LiNi Glow XL e504
2700K
1
02
W
2011
U
IP40 300mm 24V 2011mm Silver anodised male + female Diffused U cover connectors
Code Example:
74
GXS504
A
LiNi Glow XL 504
2700K
Linear
1
02
W
2011
U
IP40 300mm 24V 2011mm Silver anodised Diffused U cover male + female connectors
Linear 75
LiNi-R XL LiNi-R XL 352 /e352 5.52 W/m
24V DC
27 lm/W
150°
IP40
180°
LiNi-R XL 504 /e504 12.24 W/m
24V DC
29.9 lm/W
150°
150°
120°
120°
90°
90°
180°
l Available with a full range of white, single colour, and RGB LED sources. l Output options from 149 to 530 lumens per metre with ≥90 CRI.
l 2 step package binning.
l 3 step package binning.
l O ptimum colour consistency for high quality/close proximity lighting.
l Good colour consistency providing an economic choice when mounted over 300mm from the illuminated surface.
l W hite: 2300K/2500K/2700K/3000K/ 3200K/3800K/5000K. Single colours: Red/Green/Blue/ Orange/Amber.
l White: 2300K/2500K/2700K/3000K/ 3200K/3800K/5000K.
Note: To avoid any visible colour differences we advise that s-line and e-line products should not share the same location.
LED strip options
150°
60°
0° cd/klm
30°
IP40
180°
RGB 24V DC
15.6 W/m
IP40
Estimated output distribution 150° 180°
150°
150°
120°
120°
120°
120°
120°
90°
90°
90°
90°
90°
90°
100
200
60°
60°
30° C0/C180
C90/C270
100
200
60°
300
300
l Recessed, extensible, linear profile with spring clip retainers.
150°
30.7 lm/W
100
200
30° C0/C180
17.28 W/m
24V DC
LiNi-R XL RGB
120°
100 60°
IP40
LiNi-R XL 508 /e508
60°
200
60°
300
0° cd/klm
30°
30° C0/C180
C90/C270
60°
300
0° cd/klm
30°
30° C0/C180
C90/C270
0° cd/klm
30°
C90/C270
149lm/m
366lm/m
530lm/m
15.6W/m
Luminous flux: 149lm/m nominal (@ 3200K + Clear cover)
Luminous flux: 366lm/m nominal (@ 3200K + Clear cover)
Luminous flux: 530.5lm/m nominal (@ 3200K + Clear cover)
Size: H42.1/W31/L99.3-2016mm (Excludes spring clips)
Size: H42.1/W31/L116-2016mm (Excludes spring clips)
Size: H42.1/W31/L87.4-2016mm (Excludes spring clips)
Luminous flux: Red: 47.6lm/m Green: 129.9lm/m Blue: 14lm/m White: 196.2lm/m
Chip:
Chip:
Chip:
Toyoda Gosei
Toyoda Gosei
Toyoda Gosei
Size: H42.1/W31/L99.3-2016mm (Excludes spring clips)
Beam angle: Diffused
Beam angle: Diffused
Beam angle: Diffused
CRI:
≥90
CRI:
≥90
CRI:
≥90
Chip: Red Epistar/Green Samsung/Blue Samsung
Lifetime:
50,000 hours @ 25°C
Lifetime:
50,000 hours @ 25°C
Lifetime:
50,000 hours @ 25°C
Beam angle: Diffused
Operating temp:
Ta = -25 to 60°C (Tc max = 65°C)
Operating temp:
Ta = -25 to 60°C (Tc max = 66°C)
Operating temp:
Ta = -25 to 55°C (Tc max = 64°C)
Colours: Red 620-628nm/Blue 459464nm/Green 521-527nm
IP rating:
IP40
IP rating:
IP40
IP rating:
IP40
CRI:
N/A
Finish:
Silver anodised
Finish:
Silver anodised
Finish:
Silver anodised
Lifetime:
50,000 hours @ 25°C
Operating temp:
Ta = -25 to 55°C (Tc max = 66°C)
IP rating:
IP40
Finish:
Silver anodised
Cover/Lens: Diffused
Cover/Lens: Diffused
Cover/Lens: Diffused
Mounting: Recessed mounting via spring clip
Mounting: Recessed mounting via spring clip
Mounting: Recessed mounting via spring clip
Connection: Hardwire tails or male/female connectors
Connection: Hardwire tails or male/female connectors
Connection: Hardwire tails or male/female connectors
Control: 1-10V/DMX (see visDIM range)
Control: 1-10V/DMX (see visDIM range)
Control: 1-10V/DMX (see visDIM range)
Cover/Lens: Diffused Mounting: Recessed mounting via spring clip Connection: Hardwire tails or male/female connectors
KK508/KKe508
Control: DMX (see visDIM range)
Cable exit
5.5
31
31
76
Linear
99.3 ~ 2016
116 ~ 2016
39.6
57
39.6 76
76
Cable exit
5.5
5.5 76 31
5.5 76
KKRGB
Cable exit
39.6
57
57
39.6
Cable exit
31
KK504/KKe504
57
KK352/KKe352
87.4 ~ 2016
99.3 ~ 2016
Linear 77
LiNi-R XL Product Details
2
1
3
5
4
1-28mm
133mm spring clip spread with 28mm board
24-26mm cut out
1. Homogenous lighting with all LED strips 2. Machined aluminium end caps 3. Movable spring clips with lock screw 4. Snap-fit diffused cover 5. Typical recessed installation
78
Linear
Linear 79
LiNi-R XL Accessories Connectors
visDIM Control Gear Options
IP67 100W 24V
IP20
Aluminium housing
Black plastic housing
L248/W73/H48mm
L164/W64/H34mm
KKCN-01 50mm pair
KKCN-07 50mm pair
KKPS-01 1-10V PSU
KKDM-04 1-10V
KKCN-03 300mm pair
KKCN-09 300mm pair
visDIM dimmable power supply
KKSC-03A DMX (Screw terminal)
2 PIN male + female connector set
4 PIN RGB male + female connector set
(See Control Gear)
KKSC-03B DMX (RJ45) visDIM dimming sub-controllers (See Control Gear)
80
KKCN-06
KKCN-11
2 PIN 300mm extension lead
4 PIN RGB 300mm extension lead
Linear
Linear 81
LiNi-R XL Code Table LiNi-R XL 352
LiNi-R XL 504
RXS352 RXS504
RXS508
RXS501
LiNi-R XL e352
LiNi-R XL e504
LiNi-R XL e508
RXE352
RXE504
RXE508
n/a
2300K
N
2500K
S
n/a
2500K
S
2700K
A
n/a
2700K
A
3000K
P
n/a
3000K
P
3200K
B
n/a
3200K
B
3800K
C
n/a
3800K
C
5000K
D
n/a
5000K
D
Red
F
n/a
n/a
IP40
1
Green
G
n/a
n/a
Blue
H
n/a
300mm male + female connectors
02
n/a
Orange
I
n/a
03
n/a
300mm single tail
Amber
J
n/a
300mm double tail
04
n/a
RGB
L
n/a
n/a
n/a
1000mm single tail
12
Custom
1
00
IP40
300mm male + female connectors
24V
W
02
300mm single tail
03
300mm double tail
04
1000mm single tail
12
Custom
00
24V
W
99.3-2016mm 116-2016mm 87.4-2016mm 99.3-2016mm 83.3mm increments 100mm increments 71.4mm increments 83.3mm increments
A
IP Connection Volt
99.3-2016mm 116-2016mm 87.4-2016mm 83.3mm increments 100mm increments 71.4mm increments
Length Availability Finish
IP
Silver anodised Diffused cover
LED Colour
LED Colour
N
Volt
Connection
LiNi-R XL RGB
2300K
Length Availability Finish
LiNi-R XL 508
Silver anodised Diffused cover
A
Code Example:
RXE504
A
LiNi-R XL e504
2700K
1
02
W
2016
A
IP40 300mm 24V 2016mm Silver anodised male + female Diffused cover connectors
Code Example:
RXS504
A
1
02
W
2016
A
LiNi-R XL 504 2700K IP40 300mm 24V 2016mm Silver anodised Diffused cover male + female connectors
82
Linear
Linear 83
series
TANA 84
Linear
Linear 85
TANA TANA 352 /e352 24V DC
5.52 W/m
≤54 lm/W
150°
IP40
TANA 504 /e504 24V DC
E356145
180°
12.24 W/m
150°
≤64.4 lm/W
150°
120°
120°
120°
90°
90°
90°
180°
l Versatile, glare free, linear shelf light made to custom sizes with centred LED. l Output options from 298 to 1075 lumens per metre with ≥90 CRI. l A choice of covers and mounting options.
l 2 step package binning.
l 3 step package binning.
l O ptimum colour consistency for high quality/close proximity lighting.
l Good colour consistency providing an economic choice when mounted over 300mm from the illuminated surface.
l W hite: 2300K/2500K/2700K/3000K/ 3200K/3800K/5000K. Single colours: Red/Green/Blue/ Orange/Amber.
l White: 2300K/2500K/2700K/3000K/ 3200K/3800K/5000K.
Note: To avoid any visible colour differences we advise that s-line and e-line products should not share the same location.
LED strip options
17.28 W/m
150°
150°
120°
120°
90°
90°
≤62.2 lm/W
60°
300
60°
30°
15.6 W/m
60°
120°
120°
90°
90°
30°
90° 100 200
60°
300
30° C0/C180
C90/C270
150°
120°
60°
60°
300
400
0° cd/klm
IP40
Estimated output distribution 150° 180°
150°
200
60°
300
30° C0/C180
C90/C270
RGB 24V DC
100
400
0° cd/klm
TANA RGB
IP40
180°
200
200
30° C0/C180
24V DC
E356145
100
100 60°
IP40
TANA 508 /e508
400
0° cd/klm
30°
30° C0/C180
C90/C270
0° cd/klm
30°
C90/C270
298lm/m
788lm/m
1075lm/m
15.6W/m
Luminous flux: 298.1lm/m nominal (@ 3200K + Clear cover)
Luminous flux: 788.3lm/m nominal (@ 3200K + Clear cover)
Luminous flux: 1074.8lm/m nominal (@ 3200K + Clear cover)
Size: H18/W25/L103.3-2020mm
Size: H18/W25/L120-2020mm
Size: H18/W25/L91.4-2020mm
Chip:
Chip:
Chip:
Luminous flux: Red: 62.7lm/m Green: 192.8lm/m Blue: 34.6lm/m White: 287.7lm/m
Toyoda Gosei
Toyoda Gosei
Toyoda Gosei
Size: H18/W25/L103.3-2020mm
Beam angle: 50° (@ 45° LED position) (Clear cover)
Beam angle: 95° (@ 45° LED position) (Clear cover)
Beam angle: 95° (@ 45° LED position) (Clear cover)
CRI:
≥90
CRI:
≥90
CRI:
≥90
Lifetime:
50,000 hours @ 25°C
Lifetime:
50,000 hours @ 25°C
Lifetime:
50,000 hours @ 25°C
Beam angle: 110° (@ 45° LED position) (Clear cover)
Operating temp:
Ta = -25 to 60°C (Tc max = 69°C)
Operating temp:
Ta = -25 to 60°C (Tc max = 77°C)
Operating temp:
Ta = -25 to 50°C (Tc max = 68°C)
Colours: Red 620-628nm/Blue 459464nm/Green 521-527nm
IP rating:
IP40
IP rating:
IP40
IP rating:
IP40
CRI:
N/A
Finish:
Silver anodised
Finish:
Silver anodised
Finish:
Silver anodised
Lifetime:
50,000 hours @ 25°C
Operating temp:
Ta = -25 to 50°C (Tc max = 83°C)
Chip: Red Epistar/Green Samsung/Blue Samsung
Cover/Lens: Diffused/Clear
Cover/Lens: Diffused/Clear
Cover/Lens: Diffused/Clear
Mounting: Surface mounting via screw fixing, 3M tape or magnets
Mounting: Surface mounting via screw fixing, 3M tape or magnets
Mounting: Surface mounting via screw fixing, 3M tape or magnets
IP rating:
IP40
Connection: Hardwire tails
Connection: Hardwire tails
Connection: Hardwire tails
Finish:
Silver anodised
Control: 1-10V/DMX (see visDIM range)
Control: 1-10V/DMX (see visDIM range)
Control: 1-10V/DMX (see visDIM range)
Cover/Lens: Diffused/Clear Mounting: Surface mounting via screw fixing, 3M tape or magnets Connection: Hardwire tails
KK504/KKe504
Control: DMX (see visDIM range)
KK508/KKe508 Cable exit 5
5
5
7.5
7.5
7.5
7.5
Screw fixing points
103.3 ~ 2020
18
18
18 25
Cable exit
Cable exit
5
Cable exit
18
KK352/KKe352
25
Screw fixing points
120 ~ 2020
25
Screw fixing points
91.4 ~ 2020
25
Screw fixing points
103.3 ~ 2020
KKRGB
86
Linear
Linear 87
TANA Product Details
2
1 1. Screw fixed TANA with diffused cover 2. Push-fit flush end caps 3. Custom colour finishes available 4. LED strip positions a. 45° b. 5° c. 45° & 5° 5. Wide beam distribution for uniform shelf lighting
3
a
b
c
5
88
Linear
4
Hôtel Le Bristol, Paris Architect: Pierre-Yves Rochon Photography: Jean Garcin
Linear 89
TANA Accessories visDIM Control Gear Options
IP67
KKPS-01 1-10V PSU
100W 24V
IP20
Aluminium housing
Black plastic housing
L248/W73/H48mm
L164/W64/H34mm KKDM-04 1-10V
visDIM dimmable power supply
KKSC-03A DMX (Screw terminal)
(See Control Gear)
KKSC-03B DMX (RJ45) visDIM dimming sub-controllers (See Control Gear)
90
Linear
Linear 91
TANA Code Table
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
1
Custom
12 13 11 17 00
24V
W
103.3-2020mm
120-2020mm
91.4-2020mm
103.3-2020mm
3000K
LED Colour
3200K 3800K 5000K Red Green Blue Orange Amber
IP
TNE352 TNE504 TNE508
2700K
1000mm double tail 3000mm single tail 3000mm double tail
2300K
N
2500K
S
2700K
A
3000K
P
3200K
B
3800K
5000K
C D
IP40
1
1000mm single tail
12
1000mm double tail
13
3000mm single tail
11
3000mm double tail
17
Custom
00
24V
W
103.3-2020mm
120-2020mm
91.4-2020mm
Length Availability
A B I J
45°
A
5°
45°
A B C
B
45° & 5°
n/a
n/a
C
n/a
n/a
n/a
n/a
Screw fixed
F
3M tape
M
Magnet
P
45° & 5°
F M P
Screw fixed 3M tape Magnet
LED Positions
LED Positions Fixing
5°
Fixing
Length Availability
Finishes
Silver anodised Diffused cover Silver anodised Clear cover Custom colour Diffused cover Custom colour Clear cover
Silver anodised Diffused cover Silver anodised Clear cover Custom colour Diffused cover Custom colour Clear cover
Volt
Connection
TNS352 TNS504 TNS508 TNS501
2500K
Finishes
TANA e352 TANA e504 TANA e508
LED Colour
1000mm single tail
TANA RGB
IP
IP40
TANA 508
Connection
RGB
N S A P B C D F G H I J L
2300K
TANA 504
Volt
TANA 352
A
B
I
J
Code Example: Code Example:
92
TNS504
A
TANA 504
2700K
Linear
1
12
W
2020
A
A
M
IP40 1000mm 24V 2020mm Silver anodised 45° 3M tape Diffused cover single tail
TNE504
A
TANA e504
2700K
1
12
W
2020
A
A
M
IP40 1000mm 24V 2020mm Silver anodised 45° 3M tape single tail Diffused cover
Linear 93
TANA Micro TANA Micro 352 /e352 24V DC
5.52 W/m
65 lm/W
150°
IP20
180°
TANA Micro 504 /e504 24V DC
E356145
12.24 W/m
78.6 lm/W
150°
150°
120°
120°
90°
90°
180°
l Slim profile linear shelf light made to custom sizes with centred LED. l Choice of output: from 359 to 1329 lumens per metre with ≥90 CRI.
120°
120°
90°
90°
90°
90°
30° C0/C180
C90/C270
0° cd/klm
30°
C90/C270
Size: H14/W15/L110-2010mm
Size: H14/W15/L81.4-2010mm
Chip:
Chip:
Toyoda Gosei
Toyoda Gosei
Toyoda Gosei
Beam angle: 45°
Beam angle: 65°
CRI:
≥90
CRI:
≥90
CRI:
≥90
Lifetime:
50,000 hours @ 25°C
Lifetime:
50,000 hours @ 25°C
Lifetime:
50,000 hours @ 25°C
Operating temp:
Ta = -25 to 55°C (Tc max = 65°C)
Operating temp:
Ta = -25 to 55°C (Tc max = 70°C)
Operating temp:
Ta = -25 to 45°C (Tc max = 69°C)
IP rating:
IP20
IP rating:
IP20
IP rating:
IP20
Finish:
Silver anodised
Finish:
Silver anodised
Finish:
Silver anodised
Cover/Lens: N/A
Cover/Lens: N/A
Cover/Lens: N/A
Mounting: Surface mounting via 3M tape or screw mount end caps
Mounting: Surface mounting via 3M tape or screw mount end caps
Mounting: Surface mounting via 3M tape or screw mount end caps
Connection: Hardwire tails
Connection: Hardwire tails
Connection: Hardwire tails
Control: 1-10V/DMX (see visDIM range)
Control: 1-10V/DMX (see visDIM range)
Control: 1-10V/DMX (see visDIM range)
KK508/KKe508
Cable exit 14
14
14
Cable exit
3.4
3.4
15
15
15 93.3 ~ 2010
Linear
30°
60°
300
Size: H14/W15/L93.3-2010mm
Cable exit
94
0° cd/klm
200
60°
Luminous flux: 1328.8lm/m nominal (@ 3200K)
Beam angle: 90°
KK504/KKe504
300 30° C0/C180
C90/C270
60°
Luminous flux: 962.1lm/m nominal (@ 3200K)
l Good colour consistency providing an economic choice when mounted over 300mm from the illuminated surface.
KK352/KKe352
60°
Luminous flux: 358.8lm/m nominal (@ 3200K)
l O ptimum colour consistency for high quality/close proximity lighting.
LED strip options
100
200
1329lm/m
l 3 step package binning.
Note: To avoid any visible colour differences we advise that s-line and e-line products should not share the same location.
30°
150°
962lm/m
l 2 step package binning.
l White: 2300K/2500K/2700K/3000K/ 3200K/3800K/5000K.
180°
359lm/m
Chip:
l W hite: 2300K/2500K/2700K/3000K/ 3200K/3800K/5000K. Single colours: Red/Green/Blue/ Orange/Amber.
150°
150°
IP20
120°
60°
300 0° cd/klm
76.9 lm/W
100
200
30° C0/C180
17.28 W/m
24V DC
E356145
120°
100 60°
IP20
TANA Micro 508 /e508
110 ~ 2010
81.4 ~ 2010
Linear 95
TANA Micro Product Details
1b
1a
4 1. 2. 3. 4.
3
2
Surface mounted TANA Micro 504 Wide beam distribution for uniform shelf lighting High strength self adhesive 3M tape Optional end cap bracket accessory (sold separately)
Opposite page: APC Filles du Calvaire, Paris Architect: Laurent Deroo Lighting Design: Franck Franjou Photography: Jean Garcin
96
Linear
Linear 97
TANA Micro Accessories End caps
visDIM Control Gear Options
3 14
IP67 100W 24V
IP20
Aluminium housing
Black plastic housing
L248/W73/H48mm
L164/W64/H34mm
TMEC-01
TMEC-02*
KKPS-01 1-10V PSU
KKDM-04 1-10V
End cap pair (Includes screws)
End cap bracket pair (Includes screws)
visDIM dimmable power supply
KKSC-03A DMX (Screw terminal)
S/Steel finish
S/Steel finish
(See Control Gear)
KKSC-03B DMX (RJ45)
* Not recommended for use on lengths over 1000mm
visDIM dimming sub-controllers (See Control Gear)
98
Linear
Linear 99
TANA Micro Code Table TANA Micro 352
TANA Micro 504
TANA Micro 508
TMS352 TMS504 TMS508
TANA Micro e504
TANA Micro e508
TME352 TME504 TME508
2300K
N
2500K
S
2500K
S
2700K
A
2700K
A
3000K
P
3000K
P
3200K
B
3200K
B
3800K
C
3800K
C
5000K
D
5000K
D
Red
F
n/a
IP20
G
0
Green
n/a
Blue
H
1000mm single tail
12
n/a
Orange
I
13
n/a
1000mm double tail
Amber
J
3000mm single tail
11
n/a
3000mm double tail
0
17
IP20
Custom
00
1000mm single tail
12
24V
W
1000mm double tail
13
11
93.3-2010mm
110-2010mm
81.4-2010mm
3000mm single tail
3000mm double tail
17
Custom
00
24V
W
93.3-2010mm
110-2010mm
81.4-2010mm
IP Connection Volt
IP
Length Availability
LED Colour
N
LED Colour
2300K
Volt
Connection
TANA Micro e352
Length Availability
Code Example:
TME504
A
TANA Micro e504
2700K
0
12
W
2010
IP20 1000mm 24V 2010mm single tail
Code Example:
100
TMS504
A
TANA Micro 504
2700K
Linear
0
12
W
2010
IP20 1000mm 24V 2010mm single tail
Linear 101
series
Linear
Groove
102
Linear 103
Groove Light Groove Light 24V DC
7.68 W/m 150°
Groove Light RGB
4 IP40/65 lm/W 180°
RGB 24V DC
21.6 IP40/65 W/m
Estimated output distribution 150° 180°
150°
150°
120°
120°
120°
120°
90°
90°
90°
90° 100
100 200
60°
60°
300 30° C0/C180
0° cd/klm
30°
200
60°
30° C0/C180
C90/C270
60°
300 0° cd/klm
30°
C90/C270 Groove Light RGB cable exit
l Designed for insetting into shopfittings, shelves, joinery and architectural features. l End to end diffusion for seamless extension. l Low glare output in a choice of colour temperatures or RGB.
31lm/m
21.6W/m
Luminous flux: 30.7lm/m nominal (@ 3800K)
Luminous flux: Red: 1.77lm/m Green: 10.36lm/m Blue: 3.23lm/m White: 14.8lm/m
Size: H25/W6/L100-1000mm Chip:
Cree
Beam angle: Diffused Colour: 2800K/3800K/6500K Bin/Step: 3~3.5 step MacAdam ellipse CRI:
≥65
Lifetime:
50,000 hours @ 25°C
Operating temp:
Ta = -25 to 50°C (Tc max = 60°C)
IP rating:
IP40/IP65
Finish:
Silver anodised
Cover/Lens: Diffused Mounting: Recessed (no flange) Connection: Hardwire tails
Chip:
Everlight
Beam angle: Diffused Colours: RGB colour mixing CRI:
N/A
Lifetime:
20,000 hours @ 25°C
Operating temp:
Ta = -25 to 35°C (Tc max = 66°C)
IP rating:
IP40/IP65
Finish:
Silver anodised
Cover/Lens: Diffused Mounting: Recessed (no flange) Connection: Hardwire tails Control: DMX (see visDIM range)
35
25
Control: 1-10V/DMX (see visDIM range)
Size: H35/W6/L100-1000mm
Cable exit 3
6
4.25
Cable exit
6
100 ~ 1000
3
l Ultra-slim (6mm) linear accent marker for continuous, sharp light lines.
5.75
100 ~ 1000
Groove Light recessed into joinery
104
Linear
Linear 105
Above & Opposite page: ‘Broken Heart’, Luminale, Light & Building 2012, Frankfurt Design: GNI Projects
106
Linear
Linear 107
Groove IN Groove IN 7.68 W/m
24V DC
150°
Groove IN RGB
5.1 IP40/65 lm/W 180°
RGB 24V DC
21.6 IP40/65 W/m
Estimated output distribution 150° 180°
150°
120°
120°
120°
120°
90°
90°
90°
90° 100
100 200
60°
l Spring clip retention for hollow walls/ceilings.
0° cd/klm
30°
Luminous flux: Red: 1.77lm/m Green: 10.36lm/m Blue: 3.23lm/m White: 14.8lm/m
Cree
Bin/Step: 3~3.5 step MacAdam ellipse CRI:
≥65
Lifetime:
50,000 hours @ 25°C
Operating temp:
Ta = -25 to 50°C (Tc max = 65°C)
IP rating:
IP40/IP65
Finish:
Silver anodised
Cover/Lens: Diffused Mounting: Recessed mounting via spring clips Connection: Hardwire tails Control: 1-10V/DMX (see visDIM range)
Size: H46.8/W17.4/L115-1015mm (Excludes spring clips) Chip: Colours:
RGB colour mixing
CRI:
N/A
Lifetime:
20,000 hours @ 25°C
Operating temp:
Ta = -25 to 40°C (Tc max = 57°C)
IP rating:
IP40/IP65
Finish:
Silver anodised
Cover/Lens: Diffused Mounting: Recessed mounting via spring clips Connection: Hardwire tails Control: DMX (see visDIM range)
59.4
59.4
46.8
Cable exit
63.8
108
Linear
17.4
17.4
1-28mm
63.8
115 ~ 1015
3
Everlight
Beam angle: Diffused
Cable exit
12-13mm Cut out
C90/C270
Luminous flux: 39.2lm/m nominal (@ 3800K)
Beam angle: Diffused
126mm spring clip spread with 28mm board
30°
21.6W/m
Colour: 2800K/3800K/6500K
1. Groove IN end cap and cable exit 2. Butterfly spring clips 3. Typical recessed installation
0° cd/klm
39lm/m
Chip:
2
60°
300 30° C0/C180
C90/C270
Size: H46.8/W17.4/L115-1015mm (Excludes spring clips)
1
200
60°
46.8
l Low glare output in a choice of colour temperatures or RGB.
60°
300 30° C0/C180
l Recessed, ultra-slim, linear accent marker for sharp light lines.
150°
Cut out: 12mm x (Product overall length - 4mm)
115 ~ 1015 Cut out: 12mm x (Product overall length - 4mm)
Linear 109
Opposite page: The Darling Hotel Lobby, Sydney Lighting Design: Point Of View
110
Linear
Linear 111
Groove Accessories
Groove Code Table
visDIM Power/Control Options Groove Light
Groove Light RGB
Groove IN
Groove IN RGB
Black plastic housing
L248/W73/H48mm
L164/W64/H34mm
KKPS-01 1-10V PSU
KKDM-04 1-10V
visDIM dimmable power supply
KKSC-03A DMX (Screw terminal)
(See Control Gear)
KKSC-03B DMX (RJ45) visDIM dimming sub-controllers (See Control Gear)
n/a
n/a
3800K
C
n/a
n/a
6500K
E
n/a
n/a
RGB
L
n/a
n/a
IP40
1
IP65
5
300mm single tail
03
300mm double tail
04
Custom
00
24V
W
LED Colour
IP20
Aluminium housing
IP
100W 24V
K
Connection
IP67
2800K
Volt
GRS102 GRS101 GNS102 GNS101
100-1000mm 100-1000mm 115-1015mm 115-1015mm 100mm increments 100mm increments 100mm increments 100mm increments
Length Availability
Code Example:
112
Linear
GRS102
K
Groove Light
2800K
1
03
W
1000
IP40 300mm 24V 1000mm single tail
Linear 113
series
MiMi 114
Linear
Linear 115
MiMi MiMi 352 /e352 24V DC
5.52 W/m
≤54.1 IP54/67 lm/W
150°
180°
MiMi 007 /e007 10.83 W/m
24V DC
E356145
150°
≤41 IP54/67 lm/W
150°
120°
90°
120°
120°
90°
90°
180°
100 200
l A compact, covered, profile for architectural detail and low level ambient lighting. l Output options from 299 to 992 lumens per metre with ≥90 CRI. l Available with a full range of white, single colour, and RGB LED sources. l Interior and exterior versions with many mounting options.
0° cd/klm
120°
90°
90°
90° 100 200
300
60°
30°
30° C0/C180
C90/C270
0° cd/klm
150°
120°
60°
300
60°
400
60°
400 30°
30° C0/C180
C90/C270
0° cd/klm
30°
C90/C270
750lm/m
Luminous flux: 298.6lm/m nominal (@ 3200K + Clear cover)
Luminous flux: 4 44lm/m nominal (@ 3200K + Clear cover)
Luminous flux: 750.3lm/m nominal (@ 3200K + Clear cover)
Size: H15/W13/L103.3-2020mm
Size:
H15/W13/L61.67-2020mm
Size: H15/W13/L120-2020mm
Chip:
Chip:
Toyoda Gosei
Chip:
Toyoda Gosei
Beam angle: 70° (Clear cover)
Toyoda Gosei
Beam angle: 70° (Clear cover)
Beam angle: 75° (Clear cover)
≥90
CRI:
≥90
CRI:
≥90
50,000 hours @ 25°C
Lifetime:
50,000 hours @ 25°C
Lifetime:
50,000 hours @ 25°C
Operating temp:
Ta = -25 to 60°C (Tc max = 65°C)
Operating temp:
Ta = -25 to 45°C (Tc max = 60°C)
Operating temp:
Ta = -25 to 55°C (Tc max = 75°C)
IP rating:
IP54/67
IP rating:
IP54/67
IP rating:
IP54/67
Finish:
Silver anodised
Finish:
Silver anodised
Finish:
Silver anodised
CRI:
l O ptimum colour consistency for high quality/close proximity lighting.
l Good colour consistency providing an economic choice when mounted over 300mm from the illuminated surface.
Lifetime:
Cover/Lens: Diffused/Clear
Cover/Lens: Diffused/Clear
Cover/Lens: Diffused/Clear
Note: To avoid any visible colour differences we advise that s-line and e-line products should not share the same location.
Mounting: Surface mounting via clips or brackets
Mounting: Surface mounting via clips or brackets
Mounting: Surface mounting via clips or brackets
LED strip options
Connection: Hardwire tails or male/ female connectors
Connection: Hardwire tails or male/ female connectors
Connection: Hardwire tails or male/ female connectors
Control: 1-10V/DMX (see visDIM range)
Control: 1-10V/DMX (see visDIM range)
Control: 1-10V/DMX (see visDIM range)
KK504/KKe504
6
KK508/KKe508
Linear
KKRGB
103.3 ~ 2020
13
Cable exit 6
61.67 ~ 2020
6.5
6.5
13
Cable exit
6.5
13
15
15
KK007/KKe007
15
KK352/KKe352
116
120°
180°
444lm/m
l 3 step package binning.
l White: 2300K/2500K/2700K/3000K/ 3200K/3800K/5000K.
150°
E356145
299lm/m
l 2 step package binning.
l W hite: 2300K/2500K/2700K/3000K/ 3200K/3800K/5000K. Single colours: Red/Green/Blue/ Orange/Amber.
150°
≤61.3 IP54/67 lm/W
200 60°
400 30° C0/C180
12.24 W/m
24V DC
100
300
60°
MiMi 504 /e504
Cable exit 6
120 ~ 2020
KKXEN
Linear 117
MiMi 508 /e508 24V DC
17.28 W/m
MiMi RGB
≤57.4 IP54/67 lm/W
150°
180°
RGB 24V DC
15.6 IP54/67 W/m
Estimated output distribution 150° 180°
150°
120°
90°
120°
120°
90°
90°
100 200
0° cd/klm
120°
120°
90°
90°
30° C0/C180
C90/C270
0° cd/klm
150°
120°
90° 100 200
60°
300
60°
400 30°
≤26.8 IP54/67 lm/W
Estimated output distribution 150° 180°
150°
300
60°
MiMi Product Details
12.24 W/m
200 60°
400 30° C0/C180
Variable 24V DC
100
300
60°
MiMi XEN
60°
400 30°
30° C0/C180
C90/C270
0° cd/klm
30°
C90/C270
2
992lm/m
15.6W/m
328lm/m
Luminous flux: 991.9lm/m nominal (@ 3200K + Clear cover)
Luminous flux: Red: 54.3lm/m Green: 156.9lm/m Blue: 26.6lm/m White: 238.6lm/m (Clear cover)
Luminous flux: 328.2lm/m (White + Clear cover)
Beam angle: 75° (Clear cover)
Size: H15/W13/L103.3-2020mm
Beam angle: 75° (Clear cover)
Chip: Red Epistar/Green Samsung/Blue Samsung
Colour: White: 2800K continuously variable to amber
Beam angle: 75° (Clear cover)
CRI:
≥80 (White 2800K)
Colours: Red 620-628nm/Blue 459464nm/Green 521-527nm
Lifetime:
50,000 hours @ 25°C Ta = -25 to 55°C (Tc max = 70°C)
Size: H15/W13/L91.4-2020mm Chip:
Toyoda Gosei
CRI:
≥90
Lifetime:
50,000 hours @ 25°C
Operating temp:
Ta = -25 to 45°C (Tc max = 70°C)
IP rating:
IP54/67
Finish:
Silver anodised
Cover/Lens: Diffused/Clear
Chip:
Citizen
CRI:
N/A
Lifetime:
50,000 hours @ 25°C
IP rating:
IP54/67 Silver anodised
Mounting: Surface mounting via clips or brackets
Operating temp:
Ta = -25 to 55°C (Tc max = 70°C)
Finish:
Connection: Hardwire tails or male/ female connectors
IP rating:
IP54/67
Finish:
Silver anodised
Mounting: Surface mounting via clips or brackets
Control: 1-10V/DMX (see visDIM range)
Cover/Lens: Diffused/Clear
Connection: Hardwire tails or male/female connectors
Cover/Lens: Diffused/Clear
Linear
91.4 ~ 2020
3
1. Soft spotting on diffused cover 2. End to end for continuous indirect lighting 3. IP67 MiMi 504 section diagram 4. Adjustable angle bracket
Control: 1-10V/DMX (see visDIM range)
4
15 13
6.5
Cable exit 6
103.3 ~ 2020
Cable exit
6.5
15 6.5
15
6
118
13
Cable exit
1
Connection: Hardwire tails or male/female connectors
Control: DMX (See visDIM range)
13
Polyurethane potting
Size: H15/W13/L120-2020mm
Operating temp:
Mounting: Surface mounting via clips or brackets
Polycarbonate cover
6
120 ~ 2020
Linear 119
Private residence, New Zealand Architect: Daniel Marshall Architects Lighting Design: ECC Lighting Photography: Emily Andrews
120
Linear
Linear 121
MiMi Accessories Connectors (Continued)
Mounting Options 29.7 13
10
0째
15.5
15.5
32.9
16.7
KKCP-02 (1no.)
KKBK-05
CN54-4P-0300 300mm pair
CN67-4P-0300 300mm pair
KKCP-52 (500no.)
Adjustable bracket (Allow 2 per metre)
IP54
CN67-4P-1000 1000mm pair
Clip (Allow 3 per metre)
S/Steel finish
4 PIN RGB male + female connector set
CN67-4P-3000 3000mm pair
S/Steel finish
IP67 4 PIN RGB male + female connector set
28.8
visDIM Control Gear Options
IP67
KKBK-06 Fixed bracket (Allow 3 per metre) S/Steel finish
29.1
Connectors
100W 24V
IP20
Aluminium housing
Black plastic housing
L248/W73/H48mm
L164/W64/H34mm
KKPS-01 1-10V PSU
KKDM-04 1-10V
visDIM dimmable power supply
KKSC-03A DMX (Screw terminal)
(See Control Gear)
KKSC-03B DMX (RJ45) visDIM dimming sub-controllers (See Control Gear)
CN54-2P-0300 300mm pair
CN67-2P-0300 300mm pair
IP54
CN67-2P-1000 1000mm pair
2 PIN male + female connector set
CN67-2P-3000 3000mm pair IP67 2 PIN male + female connector set
122
Linear
Linear 123
MiMi Code Table
MiMi 352
MiMi 007
MiMi 504
MiMi 508
MiMi RGB
MiMi XEN
MiMi e352 MiMi e007 MiMi e504 MiMi e508
MIS352 MIS007 MIS504 MIS508 MIS501 MIS006
MIE508
n/a
n/a
2300K
N
2500K
S
n/a
n/a
2500K
S
2700K
A
n/a
n/a
2700K
A
3000K
P
n/a
n/a
3000K
P
3200K
B
n/a
n/a
3200K
B
3800K
C
n/a
n/a
3800K
C
5000K
D
n/a
n/a
5000K
D
Red
F
n/a
n/a
n/a
IP54
G
4
Green
n/a
n/a
n/a
IP671
Blue
H
7
n/a
n/a
n/a
Orange
I
n/a
n/a
n/a
15
Amber
J
n/a
n/a
n/a
05
RGB
L
n/a
n/a
n/a
n/a
n/a
07
Variable
M
n/a
n/a
n/a
n/a
n/a
300mm IP54 male + female connectors 300mm IP67 male + female connectors 300mm sheathed single tail 300mm sheathed double tails
09
Custom
4
00
IP54
IP67
7
24V
W
300mm IP54 male + female connectors 300mm IP67 male + female connectors 300mm sheathed single tail 300mm sheathed double tails
15
05
07
09
Custom
00
24V
W
IP Connection Volt Finishes
IP Silver anodised Diffused cover Silver anodised Clear cover
103.3-2020mm 61.67-2020mm 120-2020mm 91.4-2020mm 83.3mm increments 41.67mm increments 100mm increments 71.4mm increments
Length Availability Silver anodised Diffused cover Silver anodised Clear cover
A
B
1
103.3-2020mm 61.67-2020mm 120-2020mm 91.4-2020mm 103.3-2020mm 120-2020mm 83.3mm increments 41.67mm increments 100mm increments 71.4mm increments 83.3mm increments 100mm increments
Length Availability
LED Colour
LED Colour
N
Volt
Connection
MIE504
2300K
1
Finishes
MIE352 MIE007
A
B
Due to the clear, flush potted polyurethane top layer on IP67 MiMi a colour shift of +/-20K should be expected.
Code Example:
MIE504
A
MiMi e504
2700K
4
15
W
2020
A
IP54 300mm 24V 2020mm Silver anodised Diffused cover IP54 male + female connectors
1
Due to the clear, flush potted polyurethane top layer on IP67 MiMi a colour shift of +/-20K should be expected.
Code Example:
124
MIS504
A
MiMi 504
2700K
Linear
4
15
W
2020
A
IP54 300mm 24V 2020mm Silver anodised IP54 male + Diffused cover female connectors
Linear 125
series
KKSL 126
Linear
Linear 127
KKSL KKSL 352 /e352 5.52 W/m
24V DC
46.5 lm/W
150°
IP67
180°
KKSL 504 /e504 24V DC
E356145
12.24 W/m
150°
61.3 lm/W
150°
180°
150°
60.9 lm/W
150°
IP67
180°
24V DC
RGB
15.6 W/m
IP67
Estimated output distribution 150° 180°
150°
150°
120°
120°
120°
120°
120°
120°
90°
90°
90°
90°
90°
90°
90°
90°
100
200
60°
300 30° C0/C180
l Available with a wide range of white, single colour, and RGB LED sources.
17.28 W/m
120°
60°
l Output options from 257 to 1052 lumens per metre with ≥90 CRI.
24V DC
E356145
KKSL RGB
120°
100
l Silicone sealed, IP67, linear source for concealed illumination of architectural details.
IP67
KKSL 508 /e508
0° cd/klm
30°
200
60°
60°
300 30° C0/C180
C90/C270
0° cd/klm
100
100
30°
200
60°
300 30° C0/C180
C90/C270
60°
0° cd/klm
30°
200
60°
30° C0/C180
C90/C270
60°
300 0° cd/klm
30°
C90/C270
257lm/m
750lm/m
1052lm/m
15.6W/m
Luminous flux: 256.7lm/m nominal (@ 3200K)
Luminous flux: 750.3lm/m nominal (@ 3200K)
Luminous flux: 1052.4lm/m nominal (@ 3200K)
Size: H12.3/W13/L99.3-2016mm
Size: H12.3/W13/L116-2016mm
Size: H12.3/W13/L87.4-2016mm
Chip:
Chip:
Chip:
Luminous flux: Red: 65.6lm/m Green: 78.2lm/m Blue: 36.2lm/m White: 294.3lm/m (Clear cover)
Toyoda Gosei
Toyoda Gosei
Toyoda Gosei
l 2 step package binning.
l 3 step package binning.
Beam angle: 115°
Beam angle: 115°
Beam angle: 110°
Size: H12.3/W13/L99.3-2016mm
l O ptimum colour consistency for high quality/close proximity lighting.
l Good colour consistency providing an economic choice when mounted over 300mm from the illuminated surface.
CRI:
≥90
CRI:
≥90
CRI:
≥90
Lifetime:
50,000 hours @ 25°C
Lifetime:
50,000 hours @ 25°C
Lifetime:
50,000 hours @ 25°C
Chip: Red Epistar/Green Samsung/Blue Samsung
Operating temp:
Ta = -25 to 50°C (Tc max = 60°C)
Operating temp:
Ta = -25 to 50°C (Tc max = 65°C)
Operating temp:
Ta = -25 to 50°C (Tc max = 75°C)
IP rating:
IP67
IP rating:
IP67
IP rating:
IP67
Colours: Red 620-628nm/Blue 459464nm/Green 521-527nm
Finish:
Silver anodised
Finish:
Silver anodised
Finish:
Silver anodised
CRI:
N/A
l W hite: 2500K/2600K/3400K/3800K/ 4100K. Single colours: Red/Green/Blue/ Orange/Amber.
l White: 2500K/2600K/3400K/3800K/ 4100K.
Note: To avoid any visible colour differences we advise that s-line and e-line products should not share the same location.
LED strip options
Beam angle: 110°
Cover/Lens: Silicone potted
Cover/Lens: Silicone potted
Cover/Lens: Silicone potted
Lifetime:
50,000 hours @ 25°C
Mounting: Surface mounting via clips or brackets
Mounting: Surface mounting via clips or brackets
Mounting: Surface mounting via clips or brackets
Operating temp:
Ta = -25 to 50°C (Tc max = 70°C)
Connection: Hardwire tails or male/female connectors
Connection: Hardwire tails or male/female connectors
Connection: Hardwire tails or male/female connectors
IP rating:
IP67
Finish:
Silver anodised
Control: 1-10V/DMX (see visDIM range)
Control: 1-10V/DMX (see visDIM range)
Control: 1-10V/DMX (see visDIM range)
Cover/Lens: Silicone Potted Mounting: Surface mounting via clips or brackets Connection: Hardwire tails or male/female connectors
KK508/KKe508
4.5
99.3 ~ 2016
116 ~ 2016
13
Cable exit 87.4 ~ 2016
13
6.5
Cable exit 4.5
12.3
13
12.3
Cable exit
6.5
13
12.3
Control: DMX (See visDIM range)
6.5
KK504/KKe504
12.3
KK352/KKe352
Cable exit 4.5
99.3 ~ 2016
KKRGB
128
Linear
Linear 129
KKSL Product Details
1
3
2
1. Silicone potting for IP67 protection 2. KKSL with range of LED options 3. Stainless steel adjustable angle bracket
130
Linear
Auckland War Memorial Museum Architect: Vincent Associates Photography: Simon Devitt
Linear 131
KKSL Accessories Mounting Options
visDIM Control Gear Options 29.7
10
1째
16.7
IP67 15.4
30.9
13.5
13
100W 24V
IP20
Aluminium housing
Black plastic housing
L248/W73/H48mm
L164/W64/H34mm
KKCP-02 (1no.)
KKBK-05
KKPS-01 1-10V PSU
KKDM-04 1-10V
KKCP-52 (500no.)
Adjustable bracket (Allow 2 per metre)
visDIM dimmable power supply
KKSC-03A DMX (Screw terminal)
Clip (Allow 3 per metre)
S/Steel finish
(See Control Gear)
KKSC-03B DMX (RJ45)
S/Steel finish
visDIM dimming sub-controllers
26.7
(See Control Gear)
KKBK-06 Fixed bracket (Allow 3 per metre) S/Steel finish
29.1
Connectors
132
CN67-2P-0300 300mm pair
CN67-4P-0300 300mm pair
CN67-2P-1000 1000mm pair
CN67-4P-1000 1000mm pair
CN67-2P-3000 3000mm pair
CN67-4P-3000 3000mm pair
IP67
IP67
2 PIN male + female connector set
4 PIN RGB male + female connector set
Linear
Linear 133
KKSL 508
KKSL RGB
KKSL e352
KKSL e504
KKS e508
SLS352
SLS504
SLS508
SLS501
SLE352
SLE504
SLE508
N
n/a
2500K1 (2300K PCB)
N
2600K1 (2500K PCB)
S
n/a
2600K1 (2500K PCB)
S
3400K1 (2700K PCB)
A
n/a
3400K1 (2700K PCB)
A
3800K1 (3000K PCB)
P
n/a
3800K1 (3000K PCB)
P
4100K1 (3200K PCB)
B
n/a
4100K1 (3200K PCB)
B
Red
F
n/a
n/a
IP67
7
Green
G
n/a
n/a
Blue
H
n/a
05
Orange
I
n/a
07
n/a
Amber
J
n/a
09
n/a
300mm IP67 male + female connectors 300mm sheathed single tail 300mm sheathed double tails
n/a
RGB
L
n/a
n/a
n/a
Custom
00
7
24V
W
IP67 300mm IP67 male + female connectors 300mm sheathed single tail 300mm sheathed double tails
05
07
09
Custom
00
SLE504
24V
W
KKSL e504
Volt
IP
Volt
LED Colour
2500K1 (2300K PCB)
IP
KKSL 504
Connection
KKSL 352
Connection
LED Colour
KKSL Code Table
99.3-2016mm 116-2016mm 87.4-2016mm 99.3-2016mm 83.3mm increments 100mm increments 71.4mm increments 83.3mm increments
Length Availability
99.3-2016mm 116-2016mm 87.4-2016mm 83.3mm increments 100mm increments 71.4mm increments
Length Availability 1
Actual colour temperature after colour shift caused by silicone potting.
Code Example:
A
7
05
W
2016
3400K IP67 300mm 24V 2016mm (2700K PCB) IP67 male + female connectors
1
Actual colour temperature after colour shift caused by silicone potting.
Code Example:
SLS504 KKSL 504
134
Linear
A
7
05
W
2016
3400K IP67 300mm 24V 2016mm (2700K PCB) IP67 male + female connectors
Linear 135
series
MoMo 136
Linear
Linear 137
MoMo MoMo 352 /e352 5.52 W/m
24V DC
≤39.5 IP54/67 lm/W
150°
180°
MoMo 504 /e504 12.24 W/m
24V DC
E356145
150°
≤49.8 IP54/67 lm/W
150°
180°
l Interior and IP67 exterior versions with many mounting options.
l 2 step package binning. l O ptimum colour consistency for high quality/close proximity lighting. l W hite: 2300K/2500K/2700K/3000K/ 3200K/3800K/5000K. Single colours: Red/Green/Blue/ Orange/Amber.
150°
180°
RGB
24V DC
15.6 IP54/67 W/m
Estimated output distribution 150° 180°
150°
150°
120°
120°
120°
120°
120°
120°
90°
90°
90°
90°
90°
90°
90°
90°
60°
400 600 0° cd/klm
30° C0/C180
l Available with a full range of white, single colour, and RGB LED sources.
150°
≤46.9 IP54/67 lm/W
120°
60°
l Output options from 218 to 810 lumens per metre with ≥90 CRI.
17.28 W/m
24V DC
E356145
MoMo RGB
120°
200
l A compact, covered, profile for architectural details and low level ambient lighting.
MoMo 508 /e508
30°
60°
200
400
400
60°
600 30° C0/C180
C90/C270
200
0° cd/klm
30°
60°
60°
600 30° C0/C180
C90/C270
200
0° cd/klm
30°
60°
600 0° cd/klm
30° C0/C180
C90/C270
60°
400 30°
C90/C270
218lm/m
610lm/m
810lm/m
15.6W/m
Luminous flux: 218lm/m nominal (@ 3200K + Clear cover)
Luminous flux: 609.6lm/m nominal (@ 3200K + Clear cover)
Luminous flux: 810.4lm/m nominal (@ 3200K + Clear cover)
Size: H26.5/W25/L103.3-2020mm
Size: H26.5/W25/L120-2020mm
Size: H26.5/W25/L91.4-2020mm
Chip:
Chip:
Chip:
Luminous flux: Red: 77.5lm/m Green: 215.1lm/m Blue: 39lm/m White: 334.3lm/m (Clear cover)
Toyoda Gosei
Toyoda Gosei
Toyoda Gosei
Beam angle: 50° (Clear cover)
Beam angle: 50° (Clear cover)
Beam angle: 45° (Clear cover)
Size: H26.5/W25/L103.3-2020mm
l 3 step package binning.
CRI:
≥90
CRI:
≥90
CRI:
≥90
l Good colour consistency providing an economic choice when mounted over 300mm from the illuminated surface.
Lifetime:
50,000 hours @ 25°C
Lifetime:
50,000 hours @ 25°C
Lifetime:
50,000 hours @ 25°C
Chip: Red Epistar/Green Samsung/Blue Samsung
Operating temp:
Ta = -25 to 60°C (Tc max = 65°C)
Operating temp:
Ta = -25 to 60°C (Tc max = 70°C)
Operating temp:
Ta = -25 to 45°C (Tc max = 65°C)
l White: 2300K/2500K/2700K/3000K/ 3200K/3800K/5000K.
IP rating:
IP54/67
IP rating:
IP54/67
IP rating:
IP54/67
Colours: Red 620-628nm/Blue 459464nm/Green 521-527nm
Finish:
Silver anodised
Finish:
Silver anodised
Finish:
Silver anodised
CRI:
N/A
Beam angle: 45° (Clear cover)
Cover/Lens: Diffused/Clear
Cover/Lens: Diffused/Clear
Cover/Lens: Diffused/Clear
Lifetime:
50,000 hours @ 25°C
Note: To avoid any visible colour differences we advise that s-line and e-line products should not share the same location.
Mounting: Surface mounting via clips or brackets
Mounting: Surface mounting via clips or brackets
Mounting: Surface mounting via clips or brackets
Operating temp:
Ta = -25 to 60°C (Tc max = 70°C)
LED strip options
Connection: Hardwire tails or male/female connectors
Connection: Hardwire tails or male/female connectors
Connection: Hardwire tails or male/female connectors
IP rating:
IP54/67
Finish:
Silver anodised
Control: 1-10V/DMX (see visDIM range)
Control: 1-10V/DMX (see visDIM range)
Control: 1-10V/DMX (see visDIM range)
Cover/Lens: Diffused/Clear Mounting: Surface mounting via clips or brackets Connection: Hardwire tails or male/female connectors
KK508/KKe508
138
Linear
6
103.3 ~ 2020
6
120 ~ 2020
26.5 Cable exit
6
25
91.4 ~ 2020
12.5
25
Cable exit
12.5
25
Cable exit
12.5
12.5
25
KKRGB
26.5
Control: DMX (See visDIM range)
26.5
KK504/KKe504
26.5
KK352/KKe352
Cable exit
6
103.3 ~ 2020
Linear 139
MoMo Product Details
1
2
3
4
Polycarbonate cover
Polyurethane potting
Reflector
6
5
1. Adjustable angle bracket 2. Lock clip 3. End to end for continuous indirect lighting 4. Internal reflector for increased lumen efficiency 5. IP67 MoMo 504 section diagram 6. Homogenous lighting with all LED strip options
Hedonism Wines, London Lighting Design: Speirs + Major
140
Linear
Linear 141
MoMo Accessories Connectors (Continued)
Mounting Options
26.1
33
29.4
33.1
KKCP-03 (1no.)
KKCP-09
CN54-4P-0300 300mm pair
KKCP-53 (500no.)
Lock clip (Allow 2 per metre)
IP54
CN67-4P-1000 1000mm pair
Clip (Allow 3 per metre)
S/Steel finish
4 PIN RGB male + female connector set
CN67-4P-3000 3000mm pair
CN67-4P-0300 300mm pair
S/Steel finish
IP67 4 PIN RGB male + female connector set
90
51.2
째
visDIM Control Gear Options 25
34
28.3
37.8
25
KKBK-21
KKBK-07
Adjustable bracket (Allow 2 per metre)
Fixing plate (Allow 2 per metre)
Anodised aluminium finish
Anodised aluminium finish
Connectors
IP67 100W 24V
IP20
Aluminium housing
Black plastic housing
L248/W73/H48mm
L164/W64/H34mm
KKPS-01 1-10V PSU
KKDM-04 1-10V
visDIM dimmable power supply
KKSC-03A DMX (Screw terminal)
(See Control Gear)
KKSC-03B DMX (RJ45) visDIM dimming sub-controllers (See Control Gear)
CN54-2P-0300 300mm pair
CN67-2P-0300 300mm pair
IP54
CN67-2P-1000 1000mm pair
2 PIN male + female connector set
CN67-2P-3000 3000mm pair IP67 2 PIN male + female connector set
142
Linear
Linear 143
MoMo Code Table MoMo e352
MoMo 352 MoMo 504 MoMo 508 MoMo RGB
MMS352 MMS504
MME352
MME504
MME508
n/a
2300K
N
2500K
S
n/a
2500K
S
2700K
A
n/a
2700K
A
3000K
P
n/a
3000K
P
3200K
B
n/a
3200K
B
3800K
C
n/a
3800K
C
5000K
D
n/a
5000K
D
Red
F
n/a
n/a
IP54
G
4
Green
n/a
n/a
IP671
Blue
H
7
n/a
n/a
Orange
I
n/a
n/a
15
Amber
J
n/a
n/a
05
RGB
L
n/a
n/a
n/a
07
4
09
IP54
300mm IP54 male + female connectors 300mm IP67 male + female connectors 300mm sheathed single tail 300mm sheathed double tails
Custom
7
00
IP671
300mm IP54 male + female connectors 300mm IP67 male + female connectors 300mm sheathed single tail 300mm sheathed double tails
24V
15
W
05
07
09
Custom
00
24V
W
103.3-2020mm 120-2020mm 91.4-2020mm 83.3mm increments 100mm increments 71.4mm increments
IP Connection Volt
Length Availability Finishes
IP Silver anodised Diffused cover Silver anodised Clear cover
LED Colour
LED Colour
N
Volt
Connection
MoMo e508
2300K
Silver anodised Diffused cover Silver anodised Clear cover
A
B
1
103.3-2020mm 120-2020mm 91.4-2020mm 103.3-2020mm 83.3mm increments 100mm increments 71.4mm increments 83.3mm increments
Length Availability Finishes
MMS508 MMS501
MoMo e504
A
B
Due to the clear, flush potted polyurethane top layer on IP67 MoMo a colour shift of +/-20K should be expected.
Code Example:
MME504 MoMo e504
A
7
05
W
2020
A
2700K IP67 300mm 24V 2020mm Silver anodised Diffused cover IP67 male + female connectors
1
Due to the clear, flush potted polyurethane top layer on IP67 MoMo a colour shift of +/-20K should be expected.
Code Example:
144
MMS504
A
MoMo 504
2700K
Linear
7
05
W
2000
A
IP67 300mm 24V 2000mm Silver anodised Diffused cover IP67 male + female connectors
Linear 145
MoMo-F MoMo-F 352 /e352 24V DC
5.52 W/m
18.6 lm/W
150°
IP67
180°
MoMo-F 504 /e504 24V DC
E356145
12.24 W/m
150°
23.2 lm/W
150°
180°
l 2 step package binning.
l 3 step package binning.
l O ptimum colour consistency for high quality/close proximity lighting.
l Good colour consistency providing an economic choice when mounted over 300mm from the illuminated surface.
l W hite: 2300K/2500K/2700K/3000K/ 3200K/3800K/5000K. Single colours: Red/Green/Blue/ Orange/Amber.
l White: 2300K/2500K/2700K/3000K/ 3200K/3800K/5000K.
Note: To avoid any visible colour differences we advise that s-line and e-line products should not share the same location.
LED strip options
150°
21.6 lm/W
150°
RGB 24V DC
IP67
180°
15.6 W/m
IP67
Estimated output distribution 150° 180°
150°
150°
120°
120°
120°
120°
120°
120°
90°
90°
90°
90°
90°
90°
90°
90°
100
200
60°
300 30° C0/C180
l Fully diffused and available with all our SMD linear LED sources.
17.28 W/m
120°
60°
l Choice of output: from 103 to 373 lumens per metre with ≥90 CRI.
24V DC
E356145
MoMo-F RGB
120°
100
l Compact, IP67 rated and designed for recessed mounting in interior floors.
IP67
MoMo-F 508 /e508
0° cd/klm
30°
200
60°
60°
300 30° C0/C180
C90/C270
100
0° cd/klm
30°
200
60°
60°
300 30° C0/C180
C90/C270
100
0° cd/klm
30°
200
60°
30° C0/C180
C90/C270
60°
300 0° cd/klm
30°
C90/C270
103lm/m
284lm/m
373lm/m
15.6W/m
Luminous flux: 102.7lm/m nominal (@ 3200K)
Luminous flux: 284lm/m nominal (@ 3200K)
Luminous flux: 373.3lm/m nominal (@ 3200K)
Size: H46.4/W25/L93.3-2010mm (Excluding ground box)
Size: H46.4/W25/L110-2010mm (Excluding ground box)
Size: H26.5/W25/L81.4-2010mm (Excluding ground box)
Chip:
Chip:
Chip:
Luminous flux: Red: 20.6lm/m Green: 67.5lm/m Blur: 8.6lm/m White: 106.6lm/m (Clear cover)
Toyoda Gosei
Toyoda Gosei
Toyoda Gosei
Size: H46.4/W25/L93.3-2010mm (Excluding ground box)
Beam angle: Diffused
Beam angle: Diffused
Beam angle: Diffused
CRI:
≥90
CRI:
≥90
CRI:
≥90
Lifetime:
50,000 hours @ 25°C
Lifetime:
50,000 hours @ 25°C
Lifetime:
50,000 hours @ 25°C
Operating temp:
Ta = -25 to 60°C (Tc max = 65°C)
Operating temp:
Ta = -25 to 60°C (Tc max = 70°C)
Operating temp:
Ta = -25 to 45°C (Tc max = 65°C)
IP rating:
IP67
IP rating:
IP67
IP rating:
IP67
Colours: Red 620-628nm/Blue 459464nm/Green 521-527nm
Finish:
Silver anodised
Finish:
Silver anodised
Finish:
Silver anodised
CRI:
N/A
Chip: Red Epistar/Green Samsung/Blue Samsung Beam angle: Diffused
Cover/Lens: Diffused
Cover/Lens: Diffused
Cover/Lens: Diffused
Lifetime:
50,000 hours @ 25°C
Mounting: Ground recessed
Mounting: Ground recessed
Mounting: Ground recessed
Connection: Hardwire tails or male/female connectors
Connection: Hardwire tails or male/female connectors
Connection: Hardwire tails or male/female connectors
Operating temp:
Ta = -25 to 60°C (Tc max = 70°C)
IP rating:
IP67
Finish:
Silver anodised
Control: 1-10V/DMX (see visDIM range)
Control: 1-10V/DMX (see visDIM range)
Control: 1-10V/DMX (see visDIM range)
Cover/Lens: Diffused Mounting: Ground recessed Connection: Hardwire tails or male/female connectors
KK508/KKe508
KKRGB
146
Linear
25
110 ~ 2010
46.4
63.6
25
25 93.3 ~ 2010
46.4
63.6
63.6
46.4
Control: DMX (See visDIM range)
46.4
KK504/KKe504
63.6
KK352/KKe352
25 81.4 ~ 2010
93.3 ~ 2010
Linear 147
MoMo-F Product Details
1
2
5
4 1. 2. 3. 4. 5.
3
MoMo-F with ground box Homegenous lighting with all LED strip options Cable exit with stainless steel cable gland Typical recessed ground installation Ground box cover plate Opposite page Top Left: Beach Pavilions, Waiheke Island Architect: Young+Richards KKDC New Zealand Photography: Simon Devitt Opposite page Below: Tommy Hilfiger Store, Paris
148
Linear
Linear 149
MoMo-F Accessories Mounting Options
visDIM Control Gear Options
37.6 29.6
80.9
8.9
IP67 100W 24V
IP20
Aluminium housing
Black plastic housing
L248/W73/H48mm
L164/W64/H34mm
KKFR-03*
KKPS-01 1-10V PSU
KKDM-04 1-10V
Ground box
visDIM dimmable power supply
KKSC-03A DMX (Screw terminal)
Anodised aluminium finish
(See Control Gear)
KKSC-03B DMX (RJ45)
* Specify length to match MoMo-F
visDIM dimming sub-controllers (See Control Gear)
Connectors
150
CN67-2P-0300 300mm pair
CN67-4P-0300 300mm pair
CN67-2P-1000 1000mm pair
CN67-4P-1000 1000mm pair
CN67-2P-3000 3000mm pair
CN67-4P-3000 3000mm pair
IP67
IP67
2 PIN male + female connector set
4 PIN RGB male + female connector set
Linear
Linear 151
MoMo-F Code Table MoMo-F 504
MoMo-F 508
MoMo-F RGB
MFS508
MFS501
MFE352
MFE504
MFE508
n/a
2300K
N
2500K
S
n/a
2500K
S
2700K
A
n/a
2700K
A
3000K
P
n/a
3000K
P
3200K
B
n/a
3200K
B
3800K
C
n/a
3800K
C
5000K
D
n/a
5000K
D
Red
F
n/a
n/a
IP67
G
7
Green
n/a
n/a
Blue
H
n/a
n/a
05
Orange
I
n/a
n/a
08
Amber
J
n/a
n/a
300mm IP67 male + female connectors 1000mm sheathed single tail 1000mm sheathed double tails
16
RGB
L
n/a
n/a
n/a
Custom
00
7
24V
W
08
16
Custom
00
24V
W
93.3-2010mm 110-2010mm 81.4-2010mm 93.3-2010mm 83.3mm increments 100mm increments 71.4mm increments 83.3mm increments
Length Availability Silver anodised Diffused cover
A
Volt
93.3-2010mm 110-2010mm 81.4-2010mm 83.3mm increments 100mm increments 71.4mm increments
Length Availability Finish
05
LED Colour
IP
N
300mm IP67 male + female connectors 1000mm sheathed single tail 1000mm sheathed double tail
Volt
MoMo-F e508
2300K
IP67
Finish
MoMo-F e504
IP
MFS504
MoMo-F e352
Connection
MFS352
Connection
LED Colour
MoMo-F 352
Silver anodised Diffused cover
A
Code Example:
MFE504 MoMo-F e504
A
7
05
W
2010
A
2700K IP67 300mm 24V 2010mm Silver anodised IP67 male + Diffused cover female connectors
Code Example:
152
MFS504
A
MoMo-F 504
2700K
Linear
7
05
W
2010
A
IP67 300mm 24V 2010mm Silver anodised Diffused cover IP67 male + female connectors
Linear 153
series
SUMO 154
Linear
Linear 155
SUMO SUMO 504 /e504 220 ~ 240V AC
34.1 W/m 150°
SUMO Product Details
≤49.6 IP54/67 lm/W 180°
150°
120°
120°
90°
90° 100 200
60°
30° C0/C180
l Robust, large luminaire for interior and exterior applications. l Integrated 220-240V power supply for simple installation and optional internal 1-10V control module. l Powerful output 1691lm/m (Clear cover), in a full range of white colour temperatures with ≥90 CRI.
60°
300 0° cd/klm
30°
C90/C270
1
1691lm/m Luminous flux: 1691.4lm/m nominal (@ 3200K + Clear cover) Size: H53.2/W50/L520, 1020, 1520, 2020mm Chip:
Toyoda Gosei
Beam angle: 75° (Clear cover) l 2 step package binning.
l 3 step package binning.
CRI:
≥90
l O ptimum colour consistency for high quality/close proximity lighting.
l Good colour consistency providing an economic choice when mounted over 300mm from the illuminated surface.
Lifetime:
50,000 hours @ 25°C
Operating temp:
Ta = -25 to 60°C (Tc max = 65°C)
l White: 2300K/2500K/2700K/3000K/ 3200K/3800K/5000K.
IP rating:
IP54/IP67
Finish:
Silver anodised
l W hite: 2300K/2500K/2700K/3000K/ 3200K/3800K/5000K. Single colours: Red/Green/Blue/ Orange/Amber.
Note: To avoid any visible colour differences we advise that s-line and e-line products should not share the same location.
Cover/Lens: Diffused/Clear Mounting: Surface mounting via brackets
5
2
1. SUMO 504 with clear cover 2. SUMO with small adjustable angle bracket 3. SUMO section diagram 4. Diffused cover for homogenous lighting 5. Single cable exit gland (dimmable version has two cable glands)
Polycarbonate cover
Polyurethane potting
Connection: Hardwire tails Control: Integral 1-10V/switched
Integral PSU
3
66.9
53.2
4
50 520 / 1020 / 1520 / 2020
156
Linear
Linear 157
SUMO Accessories Mounting Options
103.5 70
90
째
107.6 70
88.7 68.1
96
139.1
67째
KKBK-16
2012 YEOSU Expo, South Korea Lighting Design: Bitzro
158
Linear
51
KKBK-17
Small adjustable bracket (Allow 2 per metre)
Large adjustable bracket (Allow 2 per metre)
Silver anodised aluminium finish
Silver anodised aluminium finish
51
Linear 159
SUMO Code Table
SUMO e504
SUS504
SUE504
2300K
N
2500K
S
2500K
S
2700K
A
2700K
A
3000K
P
3000K
P
3200K
B
3200K
B
3800K
C
3800K
C
5000K
D
5000K
D
Red
F
IP54
G
4
Green
IP671
H
7
Blue
Orange
I
1000mm sheathed single tail2
08
Amber
J
Custom
00
IP54
4
220-240V AC
M
IP671
7
1000mm sheathed single tail2
08
Custom
00
220-240V AC
M
Volt Connection
IP
LED Colour
N
Finishes
Silver anodised Diffused cover Silver anodised Clear cover
A
B
Control
Switched
N
Integral 1-10V2
T
Finishes
520/1020/1520 2020mm
Length Availability
520/1020/1520 2020mm
Length Availability Silver anodised Diffused cover Silver anodised Clear cover
A
B
Control
LED Colour
2300K
IP Volt Connection
SUMO 504
Switched
N
Integral 1-10V
T
1
Due to the clear, flush potted polyurethane top layer on IP67 SUMO a colour shift of +/-20K should be expected. 2 1-10V version has two cable exits: 1000mm power connection & 1000mm dimming connection.
Code Example:
1
Due to the clear, flush potted polyurethane top layer on IP67 SUMO a colour shift of +/-20K should be expected. 2 1-10V version has two cable exits: 1000mm power connection & 1000mm dimming connection.
SUE504
A
SUMO e504
2700K
7
08
M
1020
A
N
IP67 1000mm 220-240V 1020mm Silver anodised Switched AC sheathed Diffused cover single tail
Code Example:
SUS504 SUMO 504
160
Linear
A
7
08
M
1020
A
N
2700K IP67 1000mm 220-240V 1020mm Silver anodised Switched AC sheathed Diffused cover single tail
Linear 161
series
FX 162
Flexible
Flexible 163
FX FX /eFX 24V DC
6.96 W/m
FX RGB
≤50.1 IP20/65 lm/W
150°
180°
RGB 24V DC
9.84 IP20/65 W/m
Estimated output distribution 150° 180°
150°
120°
120°
120°
120°
90°
90°
90°
90°
100
l Full range of ≥90 CRI white colour temperatures and RGB or single colours.
l 2 step package binning.
l 3 step package binning.
l O ptimum colour consistency for high quality/close proximity lighting.
l Good colour consistency providing an economic choice when mounted over 300mm from the illuminated surface.
l W hite: 2300K/2500K/2700K/3000K/ 3200K/3800K/5000K. Single colours: Red/Green/Blue/ Orange/Amber.
l White: 2300K/2500K/2700K/3000K/ 3200K/3800K/5000K.
Note: To avoid any visible colour differences we advise that s-line and e-line products should not share the same location.
60°
300 30° C0/C180
l Silicone sheathed IP65 rated variant also available.
100
200
60°
l Flexible linear strip for concealed lighting applications.
150°
0° cd/klm
30°
C90/C270
200
60°
60°
300 30° C0/C180
0° cd/klm
30°
C90/C270
349lm/m
9.84W/m
Luminous flux: 348.7lm/m nominal (@ 3200K, IP20)
Luminous flux: Red: 54.2lm/m Green: 142.1lm/m Blue: 22.8lm/m White: 216lm/m (IP20)
Size: H2.2/W10/L125-7000mm (IP20) H5.5/W14/L127-7002mm (IP65 – Excluding fixings) (Power connection solder points every 125mm, cut point every 62.5mm) Chip:
Toyoda Gosei
Beam angle: 110°
Size: H1.9/W11.8/L125-7000mm (IP20) H5.5/W16/L127-7002mm (IP65 – Excluding fixings) (Power connection possible at 125mm, cut point every 62.5mm)
CRI:
≥90
Chip: Red Epistar/Green Samsung/Blue Samsung
Lifetime:
50,000 hours @ 25°C
Beam angle: 110°
Operating temp:
Ta = -25 to 50°C (Tc max = 67°C)
IP rating:
IP20/IP65
Colours: Red 620-628nm/Blue 459464nm/Green 521-527nm (5nm tolerance)
Finish:
N/A
CRI:
N/A
Lifetime:
50,000 hours @ 25°C
Operating temp:
Ta = -25 to 50°C (Tc max = 78°C)
IP rating:
IP20/IP65
Finish:
N/A
Cover/Lens: IP65 version with silicone sheathed cover Mounting: 3M adhesive tape (IP20), surface mounting clips (IP65) Connection: Hardwire tails or male/female connectors Control: 1-10V/DMX (see visDIM range)
Cover/Lens: IP65 version with silicone sheathed cover Mounting: 3M adhesive tape (IP20), surface mounting clips (IP65) Connection: Hardwire tails or male/female connectors Control: DMX (see visDIM range)
164
Flexible
Flexible 165
FX Product Details
2
3
1
R20 R35
1. 2. 3. 4. 5. 6.
IP65 FX with side mounting clip IP65 s-line and e-line FX with silicone brackets FX RGB and IP65 FX RGB IP65 FX RGB end cap with cable exit IP65 FX/IP65 FX RGB minimum bend radius FX/FX RGB minimum bend radius
5
4 FX Drawing IP20 125 ~ 7000
2.2
6
10
IP65
5.5
Cable exit 14
127 ~ 7002
FX RGB Drawing
1.9
IP20
11.8
125 ~ 7000
IP65
5.5
Cable exit
166
Flexible
16
127 ~ 7002
Qantas Lounge, Australia Lighting Design: Point Of View
Flexible 167
FX Accessories Mounting Options
Connectors (continued)
15
12
15.25
10
KKCP-07
KKCP-08
KKCN-06
KKCN-11
Side clip (Allow 4 per metre)
IP65 side clip (Allow 4 per metre)
2 PIN 300mm extension lead
4 PIN RGB 300mm extension lead
White plastic
Clear plastic
visDIM Power/Control Options
31.3
31
6
6
IP67
KKBK-14
KKBK-18
IP65 silicone bracket (Allow 4 per metre)
IP65 RGB silicone bracket (Allow 4 per metre)
Translucent silicone
Translucent silicone
100W 24V
IP20
Aluminium housing
Black plastic housing
L248/W73/H48mm
L164/W64/H34mm
KKPS-01 1-10V PSU
KKDM-04 1-10V
visDIM dimmable power supply
KKSC-03A DMX (Screw terminal)
(See Control Gear)
KKSC-03B DMX (RJ45) visDIM dimming sub-controllers (See Control Gear)
Connectors
168
KKCN-01 50mm pair
KKCN-07 50mm pair
KKCN-03 300mm pair
KKCN-09 300mm pair
2 PIN male + female connector set
4 PIN RGB male + female connector set
Flexible
Flexible 169
FX Code Table FX RGB
eFX
FXS902
FXS301
FXE902
n/a
2300K
N
2500K
S
n/a
2500K
S
2700K
A
n/a
2700K
A
3000K
P
n/a
3000K
P
3200K
B
n/a
3200K
B
3800K
C
n/a
3800K
C
5000K
D
n/a
5000K
D
Red
F
n/a
IP20
G
0
Green
n/a
IP651
H
5
Blue
n/a
Orange
I
n/a
01
Amber
J
n/a
02
50mm male + female connectors2 300mm male + female connectors2
RGB
L
n/a
300mm single tail
03
300mm double tail
0
04
IP20
Custom
5
00
IP651
50mm male + female connectors2 300mm male + female connectors2
24V
W
01
02
IP20
125-7000mm 62.5mm increments
300mm single tail
03
IP65
127-7002mm 62.5mm increments
300mm double tail
04
Custom
00
24V
W
IP Connection Volt
IP Length Availability
LED Colour
N
LED Colour
2300K
Volt
Connection
FX
Length Availability
1
External dimensions of IP65 version increase slightly due to silicone sleeve cover. IP65 variant only available with tail options. 2 Not available for IP65.
Code Example:
IP20
125-7000mm 125-7000mm 62.5mm increments 125mm increments
FXE902
IP65
127-7002mm 127-7002mm 62.5mm increments 125mm increments
eFX
1
External dimensions of IP65 version increase slightly due to silicone sleeve cover. IP65 variant only available with tail options. 2 Not available for IP65.
A
0
02
W
1000
2700K IP20 300mm 24V 1000mm male + female connectors
Code Example:
FXS902 FX
170
Flexible
A
0
02
W
1000
2700K IP20 300mm 24V 1000mm male + female connectors
Flexible 171
series
KKFS 172
Flexible
Flexible 173
KKFS KKFS
KKFS Product Details
6.15 W/m
24V DC
≤43.7 IP20/65 lm/W
150°
180°
150°
120°
120°
90°
90° 100 200
60°
30° C0/C180
l Side emitting, flexible linear strip for concealed lighting applications. l Silicone sheathed IP65 rated variant also available.
60°
300 0° cd/klm
30°
1
C90/C270
269lm/m Luminous flux: 268.8lm/m nominal (@ 2800K IP20) Size: H1.3/W10/L125-7000mm (IP20) H5.5/W14/L127-7002mm (IP65 – Excluding fixings) (Power connection possible at 125mm, cut point every 62.5mm) Chip: Cree Beam angle: 105° Colour: 2800K/3800K/6500K Bin/Step: 3 step MacAdam ellipse CRI: ≥65 Lifetime: 50,000 hours @ 25°C Operating Ta = -25 to 50°C temp: (Tc max = 65°C) IP rating: IP20/IP65 Finish: N/A Cover/Lens: IP65 version with silicone sheathed cover Mounting: 3M adhesive tape (IP20), surface mounting clips (IP65) Connection: Hardwire tails or male/female connectors Control: 1-10V/DMX (see visDIM range)
5 1. 2. 3. 4. 5.
Self-adhesive IP20 KKFS side emitting LED Flexible KKFS with integral heat-sink IP65 KKFS minimum bend radius KKFS minimum bend radius KKFS mounting clip
2
R20 R35
4
3
10
IP20
125 ~ 7000
1.3 IP65 14
Cable exit 5.5
174
Flexible
127 ~ 7002
Flexible 175
Above & Opposite page: Artwork by United Visual Artists Commissioned by Hengrove Park Leisure Centre
176
Flexible
Flexible 177
KKFS Accessories Mounting Options
visDIM Power/Control Options
15
10
12
15.25
IP67 100W 24V
IP20
Aluminium housing
Black plastic housing
L248/W73/H48mm
L164/W64/H34mm
KKCP-07
KKCP-08
KKPS-01 1-10V PSU
KKDM-04 1-10V
Clip (Allow 4 per metre)
IP65 clip (Allow 4 per metre)
visDIM dimmable power supply
KKSC-03A DMX (Screw terminal)
White plastic
Clear plastic
(See Control Gear)
KKSC-03B DMX (RJ45) visDIM dimming sub-controllers (See Control Gear)
6
31
KKBK-14 IP65 silicone bracket (Allow 4 per metre) Translucent silicone
Connectors
KKCN-01 50mm pair
KKCN-06
KKCN-03 300mm pair
2 PIN 300mm extension lead
2 PIN male + female connector set
178
Flexible
Flexible 179
KKFS Code Table
KKFS
FSS112 K
3800K
C
6500K
E
IP20
0
IP651
5
50mm male + female connectors2 300mm male + female connectors2
01
02
300mm single tail
03
300mm double tail
04
Custom
00
24V
W
IP20
125-7000mm 62.5mm increments
IP65
127-7002mm 62.5mm increments
Volt
Connection
IP
LED Colour
2800K
Length Availability
External dimensions of IP65 version increase slightly due to silicone sleeve cover. 2 Not available for IP65 variant.
1
Code Example:
1885 Bar, KKDC New Zealand
180
Flexible
FSS112
K
KKFS
2800K
0
02
W
1000
IP20 300mm 24V 1000mm male + female connectors
Flexible 181
series
Luna 182
Flexible
Flexible 183
Duo Luna Duo Luna /eDuo Luna 9/12V 5.27/3.65 ≤62.8 IP40/ DC W/m lm/W 65/68 150°
180°
Duo Luna RGB 7.8/5.4 IP40/ RGB 12V DC W/m
Estimated output distribution 150° 180°
150°
120°
120°
120°
90°
90°
90°
90°
30° C0/C180
l Polycarbonate casings, hardwired with a choice of 9 or 13 modules per metre (229 or 331lm/m) l Available with a full range of white colour temperatures (≥90 CRI) and in single colours or RGB. l IP68 version with resin encapsulation and ultrasonic case welding for superior protection.
60°
300
IP40
l A versatile, cost effective, flexible light source for backlighting and concealed illumination.
100
200
60° IP65
0° cd/klm
30°
C90/C270
Luminous flux: 331lm/m nominal (@3200K, 77mm pitch) Module Size: H10.7/W22.45/L60mm 111mm pitch = 9 modules per metre 77mm pitch = 13 modules per metre Toyoda Gosei
Beam angle: 105° l O ptimum colour consistency for high quality/close proximity lighting. l W hite: 2300K/2500K/2700K/3000K/ 3200K/3800K/5000K. Single colours: Red/Green/Blue/ Orange/Amber.
l 3 step package binning.
CRI:
≥90
l Good colour consistency providing an economic choice when mounted over 300mm from the illuminated surface.
Lifetime:
50,000 hours @ 25°C
Operating temp:
Ta = -25 to 50°C (Tc max = 65°C)
l White: 2300K/2500K/2700K/3000K/ 3200K/3800K/5000K.
IP rating:
IP40/IP65/IP68
Finish:
Polycarbonate
Note: To avoid any visible colour differences we advise that s-line and e-line products should not share the same location.
200
60°
60°
300 30° C0/C180
0° cd/klm
30°
C90/C270
331lm/m (77mm pitch) 7.8W/m (77mm pitch) 229lm/m (111mm pitch) 5.4W/m (111mm pitch)
Chip: l 2 step package binning.
150°
120°
100
IP68
65/68
Cover/Lens: Clear Mounting: 3M adhesive tape (IP40/65), Screw fixing (IP68) Minimum 130° (77mm pitch) bend radius: 180° (111mm pitch) Connection: Hardwire single/double ended sheathed tail Control: 1-10V/DMX (see visDIM range) Note: Performance data for 9V operation
Luminous flux: Red: 28lm/m Green: 84.1lm/m Blue: 14.2lm/m White: 124.7lm/m (77mm pitch) Module Size: H10.7/W 22/L60mm 111mm pitch = 9 modules per metre 77mm pitch = 13 modules per metre Chip: Red Epistar/Green Samsung/Blue Samsung Beam angle: 105° Colours: Red 620-628nm/Blue 459464nm/Green 521-527nm CRI:
N/A
Lifetime:
50,000 hours @ 25°C
Operating temp:
Ta = -25 to 50°C (Tc max = 65°C)
IP rating:
IP40/IP65/IP68
Finish:
Polycarbonate
Cover/Lens: Clear Mounting: 3M adhesive tape (IP40/65), Screw fixing (IP68) Minimum 20° (77mm pitch) bend radius: 45° (111mm pitch) Connection: Hardwire single/double ended sheathed tail Control: DMX (see visDIM range)
184
Flexible
Flexible 185
Duo Luna Product Details
1
3
2
22.45
Duo Luna Drawing (12V)
10.7
60
77/111 77mm Pitch = 1000 ~ 11000, 111mm Pitch = 1000 ~ 14000
13
0째
111mm pitch 180째
Minumum bend radii
180째
RGB Minumum bend radii
77mm pitch
22
Duo Luna RGB Drawing (12V)
10.7
60
90
째
77/111 77mm Pitch = 1000 ~ 7000, 111mm Pitch = 1000 ~ 9000
1. IP40 Duo Luna with self-adhesive backing 2. IP68 Duo Luna for waterproof protection 3. Colour coded PCB printing for s-line, e-line and single colour
186
Flexible
111mm pitch
77mm pitch
Britomart Showcase, Auckland Architect: Cheshire and Assembly Architects Lighting Design: Lightworks
Flexible 187
Quadro Luna Quadro Luna / eQuadro Luna 9/12V 10.5/7.2 61.2 DC W/m lm/W 150°
Quadro Luna RGB
IP40/ 65/68
180°
RGB
12V DC
Estimated output distribution 150° 180°
150°
IP65
IP40
120°
120°
120°
90°
90°
90°
90°
l Polycarbonate casings hardwired with a choice of 9 or 13 modules per metre (441 or 643lm/m).
100
200
60°
60°
300 30° C0/C180
l Higher output, cost effective, flexible light source for backlighting and concealed illumination.
0° cd/klm
30°
C90/C270
Luminous flux: 642.6lm/m nominal (@3200K, 13module/m)
l IP68 version with resin encapsulation and ultrasonic case welding for superior protection.
Module Size: H10.8/W40/L56.7mm 111mm pitch = 9 modules per metre 77mm pitch = 13 modules per metre Chip:
Toyoda Gosei
l 2 step package binning.
l 3 step package binning.
Beam angle: 110°
l O ptimum colour consistency for high quality/close proximity lighting.
l Good colour consistency providing an economic choice when mounted over 300mm from the illuminated surface.
CRI:
≥90
Lifetime:
50,000 hours @ 25°C
Operating temp:
Ta = -25 to 50°C (Tc max = 68°C)
IP rating:
IP40/IP65/IP68
Finish:
Polycarbonate
l White: 2300K/2500K/2700K/3000K/ 3200K/3800K/5000K.
Note: To avoid any visible colour differences we advise that s-line and e-line products should not share the same location.
Cover/Lens: Clear Mounting: 3M adhesive tape (IP40/65), Screw fixing (IP68) Minimum 90°(77mm pitch)/ bend radius: 180°(111mm pitch) Connection: Hardwire single/double ended sheathed tail Control: 1-10V/DMX (see visDIM range) Note: Performance data for 9V operation
188
Flexible
200
60°
60°
300 30° C0/C180
0° cd/klm
30°
C90/C270
643lm/m (77mm pitch) 14.04W/m (77mm pitch) 441lm/m (111mm pitch) 9.72W/m (111mm pitch)
l Available with a full range of white colour temperatures (≥90 CRI) and in single colours or RGB.
l W hite: 2300K/2500K/2700K/3000K/ 3200K/3800K/5000K. Single colours: Red/Green/Blue/ Orange/Amber.
150°
120°
100 IP68
14.04/9.72 IP40/ W/m 65/68
Luminous flux: Red: 61.1lm/m Green: 186.5lm/m Blue: 34.6lm/m White: 268.7lm/m (77mm pitch) Module Size: H10.8/W40/L56.7mm 111mm pitch = 9 modules per metre 77mm pitch = 13 modules per metre Chip: Red Epistar/Green Samsung/Blue Samsung Beam angle: 110° Colours: Red 620-628nm/Blue 459464nm/Green 521-527nm CRI:
N/A
Lifetime:
50,000 hours @ 25°C
Operating temp:
Ta = -25 to 50°C (Tc max = 68°C)
IP rating:
IP40/IP65/IP68
Finish:
Polycarbonate
Cover/Lens: Clear Mounting: 3M adhesive tape (IP40/65), Screw fixing (IP68) Connection: Hardwire single/double ended sheathed tail Control: DMX (see visDIM range)
Flexible 189
Quadro Luna Product Details
1
1. Quadro Luna with self-adhesive backing 2. Back lighting minimun distance diagram
40
Quadro Luna Drawing (12V)
56.7
100
10.8
77/111 77mm Pitch = 1000 ~ 6000, 111mm Pitch = 1000 ~ 8000
111
2 Above: Zhongshan Park, China Lighting Design: iLAB Image © iLAB
40
Quadro Luna RGB Drawing (12V)
10.8
56.7
°
90
77/111 77mm Pitch = 1000 ~ 5000, 111mm Pitch = 1000 ~ 7000
111mm pitch
77mm pitch
180°
Minumum bend radii (White + RGB)
190
Flexible
Flexible 191
Luna Accessories visDIM Power/Control Options
IP20 Black plastic housing L164/W64/H34mm KKDM-04 1-10V KKSC-03A DMX (Screw terminal) KKSC-03B DMX (RJ45) visDIM dimming sub-controllers (See Control Gear)
PSU Options
30W
60W
9V DC
9V DC
IP64
IP64
White plastic housing
White plastic housing
H30/W47/L145mm
H35/W61.5/L181mm
KKM309-CV
KKM609-CV
Non-dimmable
Non-dimmable
Constant voltage PSU
Constant voltage PSU
Standards: RU/CE
Standards: RU/CE
150W 9V DC IP20 Metal housing H50/W110/L199mm KKM1509-CV Non-dimmable Constant voltage PSU
Corinthia Hotel, London Lighting Design International
192
Flexible
Flexible 193
Luna Code Table
Duo Luna
Quadro Luna
DLS204 QLS404
3800K 5000K Red Green Blue Orange Amber RGB
N
n/a
n/a
2500K
S
n/a
n/a
2700K
n/a
n/a
A
n/a
n/a
3000K
P
n/a
n/a
3200K
B
n/a
n/a
3800K
C
n/a
n/a
5000K
D
n/a
n/a
IP40
n/a
n/a
1
n/a
5
n/a
IP65
n/a
n/a
IP68
8
n/a
n/a
14
06
08
100mm sheathed single tail1 100mm sheathed double tails1 1000mm sheathed single tail 1000mm sheathed double tails
16
Custom
00
9/12V
Y
14 06 08 16 00
9/12V
Y
111mm pitch 1000-5000mm
1000-3000mm
n/a
n/a
77mm pitch
1000-4000mm
1000-2000mm
n/a
n/a
111mm pitch 1000-14000mm
1000-8000mm
1000-9000mm
1000-7000mm
77mm pitch 1000-11000mm
1000-6000mm
1000-7000mm
1000-5000mm
IP Volt
Connection
2300K
100mm sheathed single tail1 100mm sheathed double tails1 1000mm sheathed single tail 1000mm sheathed double tails Custom
9V
Length Availability 12V
Pitch
n/a
IP68
IP65
111mm Module Pitch2 77mm Module Pitch3
QLE404
n/a
1 5 8
IP40
DLE204
LED Colour
LED Colour
3200K
eQuadro Luna
IP
3000K
QLS401
Connection
2700K
DLS201
eDuo Luna
Volt
2500K
Quadro Luna RGB
9V
Length Availability 12V
Pitch
N S A P B C D F G H I J L
2300K
Duo Luna RGB
111mm Module Pitch2 77mm Module Pitch3
111mm pitch 1000-5000mm
1000-3000mm
77mm pitch
1000-4000mm
1000-2000mm
111mm pitch 1000-14000mm
1000-8000mm
77mm pitch 1000-11000mm
1000-6000mm
1
7
Not available for IP68 variant 9 modules per metre @ 111mm pitch 3 13 modules per metre @ 77mm pitch 1 2
1 7
Not available for IP68 variant 9 modules per metre @ 111mm pitch 13 modules per metre @ 77mm pitch
1 2
Code Example:
3
Code Example:
DLS204 Duo Luna
194
Flexible
A
1
14
Y
1000
1
DLE204
A
eDuo Luna
2700K
1
14
Y
1000
1
IP40 100mm 9/12V 1000mm 111mm Module sheathed Pitch single tail
2700K IP40 100mm 9/12V 1000mm 111mm Module sheathed Pitch single tails Flexible 195
series
SEN 196
High Power
High Power 197
SEN SEN 100/050/033 350mA/ IP54/67 700mA 150°
180°
SEN 100
SEN 050
SEN 033
(LED pitch at 100mm centres) Constant current
(LED pitch at 50mm centres) Constant current
(LED pitch at 33mm centres) Constant current
675.7lm/m @ 350mA 1118lm/m @ 700mA
1416.7lm/m @ 350mA 2036.8lm/m @ 350mA 2300.8lm/m @ 700mA 3340.3lm/m @ 700mA
@350mA lm/W: 63.3 Power consumption: 10.675W/m Luminous flux: 675.7lm/m nominal (@3200K + Clear cover) Operating Ta = -25 to 75°C temp: (Tc max = 82°C)
@350mA lm/W: 65.8 Power consumption: 21.53W/m Luminous flux: 1416.7lm/m nominal (@3200K + Clear cover) Operating Ta = -25 to 75°C temp: (Tc max = 87°C)
@350mA lm/W: 63.6 Power consumption: 32.025W/m Luminous flux: 2036.8lm/m nominal (@3200K + Clear cover) Operating Ta = -25 to 70°C temp: (Tc max = 85°C)
@700mA lm/W: 48.4 Power consumption: 23.1W/m Luminous flux: 1118lm/m nominal (@3200K + Clear cover) Operating Ta = -25 to 55°C temp: (Tc max = 71°C)
@700mA lm/W: 49.8 Power consumption: 46.2W/m Luminous flux: 2300.8lm/m nominal (@3200K + Clear cover) Operating Ta = -25 to 30°C temp: (Tc max = 54°C)
@700mA lm/W: 48.2 Power consumption: 69.3W/m Luminous flux: 3340.3lm/m nominal (@3200K + Clear cover) Operating Ta = -25 to 30°C temp: (Tc max = 47°C)
Colour: White: 2800K/3200K/ 3800K/5000K/6500K Single colours: Red/ Green/Blue Available 210/410/610/810/1010/ lengths: 1210/1410/1810mm
Colour: White: 2800K/3200K/ 3800K/5000K/6500K Single colours: Red/ Green/Blue Available 210/410/610/810/1010/ lengths: 1210/1410/1810mm
Colour: White: 2800K/3200K/ 3800K/5000K/6500K Single colours: Red/ Green/Blue Available 210/410/610/810/1010/ lengths: 1210mm
150°
120°
120°
90°
90° 500 1000 1500
l Constant current remote driven Cree LED with many lens and control options for white. l Constant voltage RGB with integral DMX reciever.
Size: H43.2/W39.2mm (Various lengths) Chip:
Cree
Beam angle: 10°/20°/30°/60°/Spread lens/No lens Bin/Step: 2 step MacAdam ellipse (2800K, 3200K, 3800K) 4 step MacAdam ellipse (5000K, 6500K) CRI: 80 (2800K, 3200K, 3800K)/75 (5000K)/70 (6500K) Lifetime:
50,000 hours @ 25°C
IP rating:
IP54/67
Finish:
Silver anodised
Cover/Lens: Clear Mounting: Surface mounting via brackets Connection: Sheathed hardwire tails
C90/C270
43.2
Control: Switched/1-10V/DMX/DALI via external power supply options
30°
210 ~ 1810
High Power
33.33
39.2
39.2
39.2
198
50
56.9
56.9
100
43.2
l Output options from 676 to 3340 lumens per metre in a choice of white colour temperatures or RGB and single colours.
0° cd/klm
30° Lens 700mA
56.9
2500
30° C0/C180
l Powerful, continuous linear illumination for exterior façades, wall washing and other architectural applications.
60°
2000
43.2
60°
210 ~ 1810
210 ~ 1210
High Power 199
SEN 094 RGB
SEN 047 RGB
(LED pitch at 94mm centres) Constant Voltage
(LED pitch at 47mm centres) Constant Voltage
SEN 094/047 RGB RGB
SEN Product Details
24V DC IP54/67
Estimated output distribution 150° 180°
150°
120°
120°
90°
90° 500 1000 1500
60°
30° C0/C180
15.36W/m
30.72W/m
Luminous flux: Red: 117.5lm/m Green: 351.2lm/m Blue: 15lm/m White: 472.2lm/m
Luminous flux: Red: 176lm/m Green: 727.4lm/m Blue: 40.3lm/m White: 889lm/m
Size: H43.2/W39.2mm (Various lengths)
Size: H43.2/W39.2mm (Various lengths)
Chip:
Chip:
Cree
Beam angle: 35°/Spread lens
CRI: N/A
CRI: N/A
Lifetime:
50,000 hours @ 25°C
Lifetime:
50,000 hours @ 25°C
Operating temp:
Ta = -25 to 40°C (Tc max = 55°C)
Operating temp:
Ta = -25 to 40°C (Tc max = 60°C)
IP rating:
IP54/67
IP rating:
IP54/67
Finish:
Silver anodised
Finish:
Silver anodised
Cover/Lens: Clear
Cover/Lens: Clear
Mounting: Surface mounting via brackets
Mounting: Surface mounting via brackets
Connection: Sheathed hardwire tails
Connection: Sheathed hardwire tails
Control: Integral DMX receiver
Control: Integral DMX receiver
Power consumption: 15.36W/m
Power consumption: 30.72W/m
Available lengths: 480/950/1420/1890mm
Available 480/715/950/1185/1420/ lengths: 1655/1890mm
30° Lens
30°
1
C90/C270
2
3
4
Polycarbonate cover
6 1. 2. 3. 4. 5. 6.
Micro smart louvre
Polyurethane potting
5
SEN fixed bracket SEN optional micro smart louvre SEN lighting effect with no lense Small adjustable bracket and cable exit gland IP67 SEN section diagram with micro smart louvre Cree high power LED with various lense options
56.9
56.9
47
39.2
39.2 480 ~ 1890
200
0° cd/klm
Cree
Beam angle: 35°/Spread lens
94
60°
2000 2500
High Power
480 ~ 1890
High Power 201
Above: AUT WG Precinct, Auckland Architect: Jasmax Lighting Design: Lightworks Photography: Ewen Cafe Left: Musée de la Fédération Française de Tennis, Roland Garros Stadium, Paris Lighting Designer: Gérald Karlikow-Gélatic Photography: Jean Garcin Opposite page: 6 Battery Road, Singapore Lighting Design: iLAB Image © iLAB
202
High Power
High Power 203
Opposite page: Westin Hotel Faรงade Sydney Lighting Design: Point Of View Right: AUT WG Precinct, Auckland Architect: Jasmax Lighting Design: Lightworks Photography: Ewen Cafe Below: Shangri-La Hotel, Paris Lighting Design: Wild Design
204
High Power
High Power 205
SEN Accessories Mounting Options
Constant Current Driver Options (Continued)
95.9 70
0°
83
°
79.1 47.7
87.7
129.4
95.4 70
10
51
KKBK-16
51
KKBK-17
150W
75W/150W
350~700mA
350~700mA
IP67
IP66
Silver metal housing
Black metal housing
H38.8/W68/L246mm
H37.1/W59.1/L240.5mm
KKM150350110-CC 350mA
KKP75DALI-CC 75W
Small adjustable bracket (Allow 2 per metre)
Large adjustable bracket (Allow 2 per metre)
KKM150700110-CC 700mA
KKP150DALI-CC 150W
1 channel 1-10V
1 channel DALI
Silver anodised aluminium finish
Silver anodised aluminium finish
Dimmable constant current PSU
Dimmable constant current PSU
Standards: cRUus/CE/CB/FCC
Standards: CE/CSA/RU/DALI
39.8
Constant Voltage PSU Options
52.3
68.8
39.2
KKBK-09
KKBK-02
Mounting plate (Allow 2 per metre – factory fitted)
Fixed bracket (Allow 2 per metre)
Silver anodised aluminium finish
Steel finish
44.5
Constant Current Driver Options
206
100W
100W
350~700mA
350/700mA
IP20
IP67
Black metal housing
Silver metal housing
H30/W80/L230mm
H38.8/W68/L236mm
100W
24V DC
24V DC
IP67
IP67
Black metal housing
Black metal housing
H40/W44/L198mm
H42/W66/L230mm
KKL6024-CV
KKL10024-CV
Non-dimmable
Non-dimmable
Constant voltage PSU
Constant voltage PSU
Standards: CE
Standards: CE
150W 24V DC IP67 White metal housing H42/W66/L230mm
KKE100DMX-CC
KKM100350110-CC 350mA
4 channel control DMX
KKM100700110-CC 700mA
KKL15024-CV
Dimmable constant current PSU
1 channel 1-10V
Non-dimmable
Standards: cRUus/CE/ENEC/DALI/DMXRDM
Dimmable constant current PSU
Constant voltage PSU
Standards: cRUus/CE/CB/FCC/0-10V
Standards: CE
High Power
60W
High Power 207
SEN Code Table SEN 033
SN100
SN050
SN033
SN194
SN147
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
IP67
4 7
Connection
SEN 047 RGB
SEN 050
1000mm sheathed single tail 1000mm sheathed double tails Custom
08 16 00
Power
SEN 094 RGB
SEN 100
24V Constant Current 1-10V/PWM/DALI Constant Current DMX
W P D
n/a
n/a
n/a
n/a
n/a
n/a
n/a
480/950/ 1420/1890mm
480/715/950/ 1185/1420/ 1655/1890mm
K B C D E F G H L
2800K 3200K
LED Colour
3800K 5000K 6500K Red Green Blue RGB IP
IP54 1
210/410/610/ 210/410/610/ 210/410/610/ 810/1010/1210/ 810/1010/1210/ 810/1010/1210mm 1410/1610/1810mm 1410/1610/1810mm
Length Availability 10° 20° Lens Type
30° 35° 60° Spread lens
Finishes
Silver anodised Clear cover Silver anodised Clear cover + Micro louvre
Control
No lens
Integral DMX
A B F G E H Y
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
B
M
n/a
n/a
Z
n/a
n/a
n/a
Due to the clear, flush potted polyurethane top layer on IP67 SEN a colour shift of +/-20K should be expected.
1
Code Example:
208
SN050
K
SEN 050
2800K
High Power
4
08
P
1010
IP54 1000mm 1-10V 1010mm sheathed single tail
A
B
10°
Silver anodised Clear cover Paju Light Festival 2013, Korea Andrew Jaques The Flaming Beacon, Australia
High Power 209
SEN-F SEN-F 100/050/033 350mA/ IP67 700mA SEN-F 033
150°
180°
SEN-F 100
SEN-F 050
SEN-F 033
(LED pitch at 100mm centres) Constant current
(LED pitch at 50mm centres) Constant current
(LED pitch at 33mm centres) Constant current
561.1lm/m @ 3200K, 350mA
1125.6lm/m @ 3200K, 350mA
1639.7lm/m @ 3200K, 350mA
944.3lm/m @ 3200K, 700mA
1866.5lm/m @ 3200K, 700mA
2664.1lm/m @ 3200K, 700mA
@350mA lm/W: 65.7 Power consumption: 10.675W/m Luminous flux: 561.1lm (@ 3200K) Operating Ta = -25 to 75°C temp: (Tc max = 80°C)
@350mA lm/W: 65.9 Power consumption: 21.53W/m Luminous flux: 1125.6lm (@ 3200K) Operating Ta = -25 to 75°C temp: (Tc max = 83°C)
@350mA lm/W: 64 Power consumption: 32.025W/m Luminous flux: 1639.7lm (@ 3200K) Operating Ta = -25 to 70°C temp: (Tc max = 76°C)
@700mA lm/W: 51.1 Power consumption: 23.1W/m Luminous flux: 944.3lm (@ 3200K) Operating Ta = -25 to 55°C temp: (Tc max = 67°C)
@700mA lm/W: 50.5 Power consumption: 46.2W/m Luminous flux: 1866.5lm (@ 3200K) Operating Ta = -25 to 50°C temp: (Tc max = 70°C)
@700mA lm/W: 48 Power consumption: 69.3W/m Luminous flux: 2664.1lm (@ 3200K) Operating Ta = -25 to 40°C temp: (Tc max = 57°C)
White: 2800K/3200K/ Colour: 3800K/5000K/6500K Single colours: Red/ Green/Blue Available 210/410/610/810mm lengths:
White: 2800K/3200K/ Colour: 3800K/5000K/6500K Single colours: Red/ Green/Blue Available 210/410/610/810mm lengths:
White: 2800K/3200K/ Colour: 3800K/5000K/6500K Single colours: Red/ Green/Blue Available 210/410/610/810mm lengths:
150°
120°
120°
90°
90° 1000 2000
60°
4000
30° C0/C180
l Recessed in-ground or installed flush with flooring surfaces for continuous linear illumination of interior and exterior walls and other architectural features. Output options from 561 to 2664 lumens per metre in a range of white colour l temperatures or single colours.
60°
3000
0° cd/klm
SEN-F 050 and SEN-F 100
150°
180°
Spread Lens 700mA
30°
C90/C270
150°
120°
120°
l Constant current remote driven Cree LED with many lens and control options. 90°
90° 1000
Size: H48.9/W52.2/L210-810mm Chip:
Cree
2000 3000
60°
4000
Beam angle: 10°/20°/30°/60°/Spread lens/No lens Bin/Step: 2 step MacAdam ellipse (2800K, 3200K, 3800k) 4 step MacAdam ellipse (5000K, 6500K) CRI: 80 (2800K, 3200K, 3800K)/75 (5000K)/70 (6500K) Lifetime:
50,000 hours @25°C
IP rating:
IP67
Finish:
Silver anodised
5000
30° C0/C180
0° cd/klm
60° Spread Lens 700mA
30°
C90/C270
Cover/Lens: Clear Glass, Frosted Glass Mounting: Ground Recessed Mounting Connection: Sheathed hardwire tail Control: 1-10V/DMX via. External power supply options
50
210 ~ 810
High Power
62.6 48.9
62.6 48.9
52.2
52.2
210
33.33
62.6 48.9
100
52.2
210 ~ 810
210 ~ 810
High Power 211
SEN-F Product Details
1
6
2
5
4 1. 2. 3. 4. 5. 6. 7.
3
SEN-F with ground box SEN-F tiled floor installation Ground box installation cover plate Ground box cable exit hole IP67 cable exit gland Optional internal micro smart louver Typical ground installation section diagram Opposite page Above Left: 52 Martin Place, Sydney Lighting Design: Point Of View Opposite page Above Right: The Darling Star City Casino, Sydney Lighting Design: Point Of View
7
212
High Power
Opposite page Below: 52 Martin Place, Sydney Lighting Design: Point Of View
High Power 213
SEN-F Accessories
SEN-F Code Table
Mounting Options
3200K
B
3800K
C
5000K
D
6500K
E
Red
F
Green
G
Blue
H
IP
IP67
7
Connection
1000mm sheathed single tail 1000mm sheathed double tails Custom
08
16
00
Constant Current 1-10V/PWM/DALI Constant Current DMX
P
D
210/410/610/ 810mm
210/410/610/ 810mm
210/410/610/ 810mm
LED Colour IP20
IP67
Black metal housing
Silver metal housing
H30/W80/L230mm
H38.8/W68/L236mm
KKE100DMX-CC
KKM100350110-CC 350mA
4 channel control DMX
KKM100700110-CC 700mA
Dimmable constant current PSU
1 channel 1-10V
Standards: cRUus/CE/ENEC/DALI/DMXRDM
Dimmable constant current PSU Standards: cRUus/CE/CB/FCC/0-10V
214
150W
75W/150W
350~700mA
350~700mA
IP67
IP66
Silver metal housing
Black metal housing
H38.8/W68/L246mm
H37.1/W59.1/L240.5mm
Length Availability 10°
A
20°
30°
B F
60°
E
Spread lens
H
No lens
Y
Silver anodised Clear glass Silver anodised Frosted glass Silver anodised Clear glass + Micro Louvre
G
R
M
Lens Type
350/700mA
Finishes
350~700mA
Code Example:
KKM150350110-CC 350mA
KKP75DALI-CC 75W
SF050
KKM150700110-CC 700mA
KKP150DALI-CC 150W
SEN-F 050
1 channel 1-10V
1 channel DALI
Dimmable constant current PSU
Dimmable constant current PSU
Standards: cRUus/CE/CB/FCC
Standards: CE/CSA/RU/DALI
High Power
SF100
* Specify length to match SEN-F
100W
SF050
Anodised aluminium finish
100W
SF033 K
Ground box
Constant Current Driver Options
SEN-F 100
Power
KKSG-02*
SEN-F 050
2800K
90.5
90.7
58.5
SEN-F 033
K
7
08
P
2800K IP67 1000mm 1-10V sheathed single tail
610
A
610mm 10°
G Silver anodised Clear glass
High Power 215
series
SIL 216
High Power
High Power 217
SIL SIL
SIL Product Details
220 ~ 18.9 240V AC 3.79W lm/W 150°
IP65
180°
150°
120°
120°
90°
90° 100 200 300
60°
60°
400
1
500
30° C0/C180
l Low profile, surface mounting, luminaire designed for exterior illumination of window reveals and close offset wall washing. l Cree LED with unique 23° x 124° radial spread lens in a range of white colour temperatures. l Integrated 220-240V power supply for simple installation.
30°
C90/C270
25lx 3m
80lx
4 1m
1. 2. 3. 4. 5.
Surface mounted to window sil SIL side view Window illumination guide diagram Rear cable exit gland Cree LED with innovative spread lens
0.6m
3
32°
52.1
96
1.8m
104
High Power
12.5lx
1.2m
150.2
218
2
5
2m
Luminous flux: 72lm nominal (@2800K) Size: H52.1/W150.2/L114.7mm Chip: Cree Beam angle: 23° by 124° Bin/Step: 2 step MacAdam ellipse (2800K, 3200K, 3800K) 4 step MacAdam ellipse (5000K, 6500K) Colours: White: 2800K/3200K/3800K/ 5000K/6500K Single colours: Red/Green/Blue CRI: 80 (2800K, 3200K, 3800K)/ 75 (5000K)/70 (6500K) Lifetime: 50,000 hours @ 25°C Operating Ta = -25 to 55°C temp: (Tc max = 63°C) IP rating: IP65 Finish: Black/Silver anodised end caps (black injection molded section) Cover/Lens: Clear Mounting: Surface mounted Connection: Hardwire tail 1000mm Control: Integral 700mA driver (Non dimmable) 18.7 20
* Visual lighting effect will vary depending on window size/shape and ambient lighting conditions.
0° cd/klm
27 Mounting points
127 Mounting points
High Power 219
SIL Code Table
SIL
K
3200K
B
3800K
C
5000K
D
6500K
E
Red
F
Green
G
Blue
H
IP
IP65
5
Volt Connection
1000mm sheathed single tail
08
Custom
00
220-240V AC
M
Silver anodised
B
Black anodised
F
LED Colour
2800K
Finishes
SIS111
Code Example:
220
High Power
SIS111
K
SIL
2800K
5
08
M
B
IP65 1000mm 220-240V Silver anodised sheathed AC single tail
High Power 221
series
PUK 222
Spotlights
Spotlights 223
PUK-L PUK-L 24V DC 2.64W
150°
PUK-L Product Details ≤51.7 lm/W
IP44
180°
150°
120°
120°
90°
90° 100 200
60°
60°
300 400
30° C0/C180
0° cd/klm
30°
C90/C270
l Compact, surface mounting luminaire designed for downlighting beneath cabinets and shelves.
Luminous flux: 136.5lm nominal (@3200K)
l Available in a full range of white colour temperatures with a CRI of ≥90 to suit display applications.
Chip:
l Silver anodised aluminium housing with polycarbonate covers and optional louvre.
Size: H18/Ø70mm Toyoda Gosei
Beam angle: 90° (Clear cover) Colours: White: 2300K/2500K/2700K/ 3000K/3200K/3800K/5000K CRI: ≥90 Lifetime:
50,000 hours @ 25°C
Operating temp:
Ta = -25 to 45°C (Tc max = 62°C)
IP rating:
IP44
Finish: Silver anodised Cover/Lens: Diffused/Clear (Optional honeycomb louvre accessory)
1
2
1. PUK-L exploded assembly diagram 2. PUK-L installed with diffused cover 3. Cable exit and fixing hole positions 4. High quality machined and anodised aluminium housing
Mounting: Surface mounted via screws (supplied) Connection: Hardwire tail Control: 1-10V/DMX (see visDIM range)
4
3
54.5
Ø7 0
Screw fixing points
18
224
Spotlights
Cable exit
Spotlights 225
PUK-L Accessories
PUK-L Code Table
PUK-L
N
2500K
S
2700K
A
3000K
P
3200K
B
3800K
C
5000K
D
IP
IP44
2
Volt Cable
1000mm sheathed single tail
08
24V
W
Silver anodised Diffused cover Silver anodised Clear cover
A
B
LED Colour
2300K
Finishes
PLS142
PUHC-01 5mm Honeycomb louvre (Includes clip) Black finish
visDIM Power/Control Options
IP67 100W 24V
IP20
Aluminium housing
Black plastic housing
L248/W73/H48mm
L164/W64/H34mm
KKPS-01 1-10V PSU
KKDM-04 1-10V
visDIM dimmable power supply
KKSC-03A DMX (Screw terminal)
(See Control Gear)
KKSC-03B DMX (RJ45) visDIM dimming sub-controllers (See Control Gear)
226
Spotlights
Code Example:
PLS142 PUK-L
A
2
08
W
2700K IP44 1000mm 24V sheathed single tail
A Silver anodised Diffused cover
Spotlights 227
series
TAYO 228
Spotlights
Spotlights 229
TAYO Spot
TAYO Spot Product Details TAYO Spot 30.2 12V DC 1.62W lm/W 150°
IP67
180°
150°
120°
120°
90°
90°
1
1. 2. 3. 4. 5. 6. 7.
High power Cree LED with narrow beam optic Flush cable exit gland for reduced height Ground housing cable exit Clear glass cover with stainless steel bezel Typical concrete installation Typical flooring installation TAYO spot with spread lens optic
1000
60°
3000
30° C0/C180
l A small, robust, IP67 spotlight for recessed interior/exterior in-ground mounting. l Cree LED with lens options, in a range of white colour temperatures and single colours l Stainless steel housing with safety glass cover.
60°
2000
Spread Lens
0° cd/klm
30°
C90/C270
Luminous flux: 48.9lm nominal (@ 3200K) Size: H63/Ø56mm Chip:
Cree
Beam angle: 10°/20°/30°/60°/Linear Beam
2
Bin/Step: 2 step MacAdam ellipse (2800K, 3200K, 3800K) 4 step MacAdam ellipse (5000K, 6500K) CRI: 80 (2800K~3800K)/ 75 (5000K)/70 (6500K) Lifetime:
50,000 hours @ 25°C
Operating temp:
Ta = -25 to 50°C (Tc max = 70°C)
IP rating:
IP67
Finish: Stainless steel Cover/Lens: Clear glass Mounting:
Recessed mounting
7
3
5
4
Connection: Single sheathed tail Control: 1-10V/DMX (see visDIM range)
63
50mm minimum drainage
Cut out: 47mmØ
50mm minimum depth
Ø5
6
48mm Cut out
6
230
Spotlights
Spotlights 231
TAYO Micro TAYO Micro (Indoor) 12V DC 0.144W
22.6 lm/W
12V DC 0.144W
IP54
Estimated output distribution 150° 180°
15.2 lm/W
90°
120°
120°
90°
90°
90° 30
60 Indoor
60 60°
90
60°
0° cd/klm
120 30°
C90/C270
30° C0/C180
0° cd/klm
30°
C90/C270
l Compact recessed marker spots with single Citizen LED source.
Luminous flux: 3.26lm nominal (@ 2700K)
Luminous flux: 2.19lm nominal (@ 2700K)
l Available in a range of white colour temperatures or as single colours.
Size: H57.7/Ø30mm
Size: H63.9/Ø30mm
l IP67 Stainless steel body for exterior use or anodised aluminium IP54 version for indoors.
Chip:
Chip:
Citizen
Citizen
Beam angle: 160°
Beam angle: 160°
Colour: White: 2700K/3000K/3500K/5000K Single colours: Red/Green/Blue
Colour: White: 2700K/3000K/3500K/5000K Single colours: Red/Green/Blue
Bin/Step: 3 step MacAdam ellipse
Bin/Step: 3 step MacAdam ellipse
CRI: 80
CRI: 80
Lifetime:
50,000 hours @ 25°C
Lifetime:
50,000 hours @ 25°C
Operating temp:
Ta = -25 to 60°C (Tc max = 65°C)
Operating temp:
Ta = -25 to 60°C (Tc max = 60°C)
IP rating:
IP54
IP rating:
IP67
Finish: Silver anodised
Finish: Stainless steel
Cover/Lens: Diffused
Cover/Lens: Frosted glass
Mounting:
Mounting:
Recessed mounting
Connection: Single sheathed tail
Control: 1-10V/DMX (see visDIM range)
Control: 1-10V/DMX (see visDIM range)
0
0
Ø3
57.7 Cut out: 25mmØ
Spotlights
Recessed mounting
Connection: Single sheathed tail
Ø3
232
60°
90
120 30° C0/C180
150°
120°
30 60°
IP54
Estimated output distribution 150° 180°
150°
120°
Outdoor
TAYO Micro (Outdoor)
63.9 Cut out: 25mmØ
Spotlights 233
TAYO Micro Product Details
1. TAYO Micro indoor fixing clip 2. TAYO Micro indoor
1
234
Spotlights
2
Auckland Convention Centre
Spotlights 235
TAYO Accessories
TAYO Code Table
Mounting Options Ø56
TAYO Micro TAYO Micro
TMS100 TOS100
TPS101
(Indoor)
(Outdoor)
TAYO Spot
n/a
2800K
K
n/a
n/a
3000K
P
n/a
3200K
B
n/a
n/a
3500K
T
n/a
3800K
C
n/a
n/a
5000K
D
n/a
6500K
E
n/a
n/a
Red
F
Green
G
Blue
H
IP54
4
n/a
n/a
IP67
7
n/a
1000mm sheathed single tail
08
12V
Y
KKSC-03B DMX (RJ45)
10°
C
n/a
n/a
visDIM dimming sub-controllers
20°
P
n/a
n/a
30°
T
n/a
n/a
60°
E
n/a
n/a
Spread lens
H
n/a
n/a
Diffused cover
F
n/a
Ø50
KKBK-13 TAYO Spot in-ground housing Anodised aluminium finish
LED Colour
100
A
104
2700K
IP
visDIM Power/Control Options
Black plastic housing L164/W64/H34mm KKDM-04 1-10V
Volt Cable
IP20
(See Control Gear)
Lens Type
KKSC-03A DMX (Screw terminal)
Code Example:
236
Spotlights
TMS100
A
TAYO Micro (Indoor)
2700K
4
08
Y
IP54 1000mm 12V sheathed single tail
F Diffused cover
Spotlights 237
series
MR16 238
Spotlights
Spotlights 239
LED MR16 LED MR16 12V DC
LED MR16 Product Details
55.6 lm/W
4W
150°
180°
150°
120°
120°
90°
90° 1000 2000
60°
3000
60°
30° Lens
4000
30° C0/C180
0° cd/klm
30°
C90/C270
l An efficient, high CRI, single point 4W LED source with a compact cast aluminium body.
Luminous flux: 222.4lm nominal (@ 3200K)
l Suitable as an alternative to 20 - 35W MR16 halogen lamps.
Size: H53mm/Ø50mm
l Available in a choice of colour temperatures and beam angles.
Chip:
l Remote 1-10V/DMX dimming control (See visDIM range).
Beam angle: 15°/30°
1
2
Citizen
Bin/Step: 7 step MacAdam ellipse (Multi chip mixing) CRI: ≥85 Lifetime:
50,000 hours @ 25°C
Operating temp:
Ta = -25 to 40°C (Tc max = 70°C)
IP rating:
IP20
Finish: Black housing and black bezel Cover/Lens: N/A Mounting:
MR16 lamp
Connection: GU5.3 lamp base Control: 1-10V/DMX (see visDIM range)
0
Ø5
4 53
240
Spotlights
1. 2. 3. 4.
3
Private residential installation, housing by others Black cast aluminium housing LED MR16 packaging Medium beam spread
Spotlights 241
LED MR16 Accessories
LED MR16 Code Table
visDIM Power/Control Options LED MR16
IP20
Aluminium housing
Black plastic housing
L248/W73/H48mm
L164/W64/H34mm
KKPS-01 1-10V PSU
KKDM-04 1-10V
visDIM dimmable power supply
KKSC-03A DMX (Screw terminal)
(See Control Gear)
KKSC-03B DMX (RJ45) visDIM dimming sub-controllers (See Control Gear)
LED Colour
100W 24V
K
3000K
P
5000K
D
IP
IP67
2800K
IP20
0
Lens Type Power
MRS016
12V
Y
15°
B
30°
T
Code Example:
242
Spotlights
MRS016
K
0
Y
T
LED MR16
2800K
IP20
12V
30°
Spotlights 243
Control Gear 244
Power/Control
Power/Control 245
Control Gear visDIM
visDIM 1-10V sub-controller functions and wiring visDIM 1-10V sub-controller dip switches Switch Number
l For local dimming control or to interface with 1-10V, 0-10V and DMX control systems. l H igher frequency pulse width modulation (1100-1200 KHz) minimises flicker and strobe effects for comfortable dimming and interference free video monitoring or recording.
UP
Input Type
1to10V
0to10V
2
Dimming Type
/
ノ
Output Type
Linear dimming curve Logarithmic dimming curve
Ch.1=Ch.2 Channel 1 and channel 2 act in unison, for white/mono control Ch.1≠Ch.2 Channel 1 and channel 2 act as XEN product control
Ch.1=Ch.2 Ch.1≠Ch.2
1-10V controller
DIM+
1-10V IN
1to10V
DOWN
1
Input Type
2
Dimming Type
/
ノ
3
Output Type
Ch.1=Ch.2
Ch.1≠Ch.2
CH1
Ch + Ch -
UP
1 2 3
0to10V
Output to LED product
Ch +
Function
(Ch.1: Max 5A)
ta = 60°C max 2x5A (max) channel 1-10V PWM dimming control gear Switch Number
NC
visDIM DMX sub-controller
t c = 80°C max
visDIM 1-10V
UP DN
Ch -
9-24V DC IN +
(Input : Max 10A)
9-24V input
visDIM 1-10V sub-controller
/ ノ
White/mono wiring
l High load capacity sub-controllers (5A per channel) for reduced numbers and lower costs in larger projects.
CH2
DIM-
visDIM 1-10V PSU (100W/24V)
DOWN
1 3
l Smooth, stable dimming across the output range with very good resolution and subtle pop on/pop off at low levels. l H igh quality of components and circuit design preserves both control and output quality over longer wiring distances, maximising the colour stability and lifetime of LED products.
Function
Symbols explained
(Ch.2 : Max 5A)
KKDC designed, control units – for superior dimming and control of our LED products.
XEN wiring dip switches
UP
DIM+
1-10V IN
1to10V
DOWN
1
Input Type
2
Dimming Type
/
ノ
3
Output Type
Ch.1=Ch.2
Ch.1≠Ch.2
1 2 3
0to10V
XEN product
Ch +
Function
UP DN
Ch -
NC
Switch Number
Ch -
ta = 60°C max 2x5A (max) channel 1-10V PWM dimming control gear
Ch +
t c = 80°C max
visDIM 1-10V
(Ch.2 : Max 5A)
9-24V DC IN +
(Input : Max 10A)
9-24V input
(Ch.1: Max 5A)
1-10V controller
DIM-
Rotary pots control DMX channel Rotary pots control DMX channel
Stand alone (white/mono)
Rotary pots act as dimmer x100 = 10% dim step x10 = 1% dim step x1 = 0.1% dim step Rotary pots act as sequence control
Stand alone (RGB) Mode x100 Fixed colour 0 RGB Scroll
1~9
Pot address/function x10 x1 Output control, 0=Low, 9=High Static colour, 0=Blue, 1=Red, 2=Yellow, 3=Green... Output control, 0=Low, 9=High Scroll speed, 0=Low, 9=high
RGB/3 channel wiring Channel pots
DMX in
Serial: 1204 900013 Date:
t c = 80°C max Terminal ta = 60°C max RJ-45 3x5A (max) channel DMX PWM dimming control gear
visDIM DMX x100 90 1
x10 90 1
x1 90 1
ON ( T : Termination )
2 3
2 3
2 3
DMX OUT + - S
DMX out
dip switches
T 1 2
R(5A) G (5A) B(5A) COM +
9-24V input
DMX IN + - S
Power/Control
Order code: KKSC-03A (terminal type) KKSC-03B (RJ45 type) Size: H34/W64/L164mm Weight: Terminal Type: 155g, RJ45 Type: 160g Operating Ta = -10 to 60°C temp: (Tc max = 80°C) Storage Ta = -20 to 70°C temp: IP rating: IP20 Finish: Plastic cover (black) Mounting: Screw fixing Connection: Power Input/output: Screw terminals (Wire gauge 12~26AWG) Control: KKSC-03A screw terminals (Wire gauge 18~26AWG) KKSC-03B RJ45 leads Control: DMX512 systems Input Voltage: 9 -24V DC Output 3 x 5A (max) Current:
DMX Receiver Mode DMX end of line termination
(Input : Max 15A)
246
Order code: KKDM-04 Size: H34/W64/L164mm Weight: 150g Operating Ta = -10 to 60°C temp: (Tc max = 80°C) Storage Ta = -20 to 70°C temp: IP rating: IP20 Finish: Plastic cover (black) Mounting: Screw fixing Connection: Screw terminals (Wire gauge 12~26AWG) Control: 1-10V/0-10V systems or 100KΩ variable resistor Input Voltage: 9 -24V DC Output 2 x 5A (max) Current:
l Screw terminal or RJ45 control connection
9-24V DC IN +
Order code: KKPS-01 Size: H48/W73/L248mm Weight: 1.5kg Operating Ta = -20 to 60°C temp: (Tc max = 85°C) Storage Ta = -40 to 85°C temp: IP rating: IP67 Finish: Silver anodised Mounting: Screw fixing Connection: AC Input: 0.75mm² 3C 300mm DC Output: 16AWG 2C 300mm Dimming Input: 22AWG 3C 300mm Control: 1-10V systems or 100KΩ variable resistor Output 4.3A (max) Current:
l LED MR16 product control
visDIM DMX sub-controller dip switches
78
l IP67 with hardwired 1-10V cable
visDIM DMX sub-controller functions and wiring
78
l XEN product control
l D MX standalone RGB fade sequences, static colours, or fixed dimming levels for white light
78
l L inear dimming curve
l Selectable linear or logarithmic curve
45 6
l 9 -24V DC product control
45 6
l 9 -24V DC product control
45 6
l 2 4V DC 1-10V dimmable power supply unit
White (common +), blue (-), green (-), red (-), to RGB LED product
(For RJ45 connections, Pin 1 = DMX +, Pin 2 = DMX -, Pins 7+8 = Shield)
Power/Control 247
Other DMX Products DMX master controller
DMX repeater
l S imple DMX controller with variable speed RGB sequences, static colours and dimming mode
l DMX signal booster
l DMX output
l Preserves signal level and integrity in long/complex DMX systems or areas of high electromagnetic interference
l RGB (3x1A max.) PWM output Order code: KKMC-01
Order code: KKRP-01
Size: W116.6/H45.4/L72.7mm
Size: W49.5/H30/L194.5mm
IP rating: IP20
IP rating:
Finish:
Finish: Black metal
White plastic
Mounting: Screw fixing concealed mounting clip Connection: Hardwire tails DC power in: red +/black DMX out: white +/green RGB output: white common + Control: DMX512 output Input Voltage: 9 -24V DC Output Current:
3 x 1A (max) channels RGB output
Mounting:
IP20 Screw fixing
Connection: Screw terminals DC power in: +/DC power loop out: +/DMX: +/-/shield Control: DMX512 repeater Input Voltage: 9 -24V DC Power 2W max. Consumption:
Power 2W max. (controller only) Consumption:
248
Power/Control
Power/Control 249
visDIM 1-10V wiring examples
visDIM DMX wiring examples
The following diagrams depict common wiring solutions using KKDC’s visDIM 1-10V products.
The following diagrams depict common wiring solutions using KKDC’s visDIM DMX products.
It is useful to know the following information when using 1-10V Shorted (10V) = lowest output (0%) Open (0V) = highest output (100%)
DMX wiring example (small system)
15m (CAT5)
5m (CAT5)
9-24V PSU
CH1
visDIM 1-10V sub-controller
RGB LED product
CH2
DMX wiring example (big system) Output to LED product
15m (CAT5)
CH2
#1
50m (CAT5)
#2 (T=DN)
visDIM DMX sub-controller
#1 (T=DN)
visDIM DMX sub-controller
visDIM DMX sub-controller
To suitable PSU On to unlimited number of units within the 50m wiring distance.
10m (CAT5)
10m (CAT5)
KKRP-01
PSU
CH1
visDIM 1-10V sub-controller
PSU
9-24V input
PSU
9-24V PSU
RGB LED product
RGB LED product Output to LED product
1-10V input (50m@AWG22) mains input
#10 (T=UP)
visDIM DMX sub-controller
mains input
5m (CAT5) #2 (T=DN)
visDIM DMX sub-controller
#1 (T=DN)
visDIM DMX sub-controller
1-10V controller
PSU
PSU
PSU
visDIM 1-10V sub-controller
RGB LED product
RGB LED product
#32 (T=UP)
RGB LED product
15m (CAT5)
PSU
PSU
PSU
visDIM 1-10V 100W PSU #2 To suitable PSU
1-10V controller
KKRP-01
#2 (T=DN)
visDIM DMX sub-controller
15m (CAT5)
visDIM 1-10V 100W PSU
visDIM DMX sub-controller
visDIM DMX sub-controller
Output to LED product
mains input
#1 (T=DN)
RGB LED product
RGB LED product
#32 (T=UP)
RGB LED product
1-10V input (50m@AWG22)
#32 To suitable PSU
KKRP-01
24V DC 100W - black
1-10V controller
Or Dimming PSU : KKPS-01 (visDIM 1-10V 100W 24V PSU)
#32 (T=UP)
RGB LED product
visDIM DMX 100W wiring example with KK504/KKe504 strip
0.5mm2/ 20AWG 5m
Cable size / Max distance (d) 0.75mm2/ 1.0mm2/ 1.5mm2/ 18AWG 15AWG 17AWG 9m 12m 20m
Max distance (d) visDIM 1-10V
visDIM DMX sub-controller
+ red
#2 (T=DN)
RGB LED product
RGB LED product
visDIM 1-10V 100W wiring example with KK504/KKe504 strip
KK504/KKe504 (7m) + 100W PSU + visDIM 1-10V
#1 (T=DN)
visDIM DMX sub-controller
visDIM DMX sub-controller
On to unlimited number of units within the 50m wiring distance.
Max 2m
PSU
visDIM 1-10V 100W PSU
PSU
PSU
Output to LED product
mains input
2.5mm2/ 13AWG 35m
KK504/KKe504 (7m) + 100W PSU + visDIM DMX Max 2m
4m max
3m max
+ red 24V DC 100W - black
0.5mm2/ 20AWG 9m
Cable size / Max distance (d) 0.75mm2/ 1.0mm2/ 1.5mm2/ 18AWG 17AWG 15AWG 16m 22m 35m
2.5mm2/ 13AWG 61m
Max distance (d) visDIM DMX
4m max 7m max
7m max
3m max
(max 50m @ 22 AWG)
(max 50m @ 22 AWG)
KKMC-01 or other 1-10V control system
All loading and wiring run lengths indicated are based on best case scenarios, site conditions may require these details to vary. Always contact a professional when assessing site conditions, all installations must be carried out by qualified persons. 250
Power/Control
Power/Control 251
Industry Terms 1. Lighting
2. Electrical
1.1.
2.1.
General Lighting Terms
General Electrical
1.1.1. Luminaire
2.1.1. Voltage
1.1.2. Glare
2.1.2. Current
1.1.3. Optic
2.1.3. Resistance
1.1.4. Diffusion/Diffuser
2.1.4. Wattage
1.2. Photometry
2.1.5.
Direct current (DC)
2.1.6.
Alternating current (AC)
2.1.7.
Constant current
2.1.8.
Constant voltage
2.1.9.
Power factor
1.2.1.
Luminous flux & lumens
1.2.2. Radiant flux 1.2.3. Illuminance & Lux 1.2.4. Candela (cd) 1.2.5. Luminaire efficacy 1.2.6. Luminous efficiency
2.1.10. Interference 2.1.11. Parasitic capacitance 2.1.12. Inrush current
2.5. LED 2.5.1. Bin/Binning
1. Lighting
1.1.1. Luminaire
2.5.4. LED array
Term for ‘light fittings’ or ‘fixtures’, referring to a complete lighting product.
1.2.6. Luminous efficiency
2.5.5. Heat sink
General Lighting Terms
2.5.6. LED lifetime
1.1.2. Glare
2.5.7.
The result of excessive amounts of viewable contrast. Glare is often the cause of visual discomfort and can lead to sight being impaired or an individual being distracted, in the extreme it’s called disability glare. Interior glare is often known as discomfort glare; caused by bright windows or luminaires.
LED package
2.5.8. Temperature – Ta/Tc /Tj 2.5.9.
Thermal management
2.5.10. Thermal resistance 3. Standards 3.1. Organisations
2.2. Electrical & Electronic Components
3.1.2. IEC 3.1.3. BSI
The method of controlling light, either by reflection or by refraction.
1.2.10. Integrating sphere
2.2.1.
3.1.4. IESNA
1.2.11. Goniophotometer
2.2.2. Capacitor
1.1.4. Diffusion/Diffuser
3.1.5. ANSI
2.2.3. Resistor
3.1.1. OSHA
2.2.4. Integrated circuit (IC)
3.1.1. ISO
Where an optical element – often translucent glass or plastic – covers the light source within a housing. The light transmitted throughout the diffuser will be redirected and scattered with the optical properties and transmission efficiency of the material used.
1.2.8. Absolute photometry 1.2.9.
Relative photometry
1.3. Colourimetry 1.3.1. Colour Space (CIE colour space/ chromaticity diagrams) 1.3.2. Kelvin (Correlated Colour Temperature – CCT) 1.3.3. Planckian locus/ Black body line 1.3.4. MacAdam Ellipse (SDCM) 1.3.5. Saturation/saturated
Printed circuit board (PCB)
2.2.5. Diode 2.2.6. Bridge rectifier 2.3. Installation 2.3.1.
Series circuit
3.2. Standards 3.2.1. LM79-08 3.2.2. LM80 3.2.3. TM-21
1.2. Photometry
2.3.2. Parallel circuit
3.2.4. CE
2.3.3. AWG
1.2.1. Luminous flux & lumens
3.2.5. RoHS Directive 2002/95/ECN
The total quantity of light emitted by a light source within the visible spectrum (380-780nm) as perceived by the human eye, luminous flux is measured in lumens (lm).
2.3.4. IP rating
3.2.6. WEEE
2.4.
Lighting control
4.
1.3.8. Rendering average (Ra)
2.4.1.
Control gear
1.3.9.
2.4.2. DALI – Digitally Addressable Lighting Interface
4.1.1. Extruding
1.2.2. Radiant flux
2.4.3. DMX
4.1.2.
CNC machining
2.4.4. 1-10V
4.1.3.
Ultrasonic welding
The total power of radiation produced through all spectrums, measured in Watts (W).
2.4.5. 0-10V
4.1.4. SMT
2.4.6. KNX
4.2.
2.4.7.
4.2.1. Anodising
1.3.6. Hue 1.3.7.
Colour rendering index (CRI) Spectral power distribution
1.3.10. Wavelength 1.3.11. Ultraviolet (UV) 1.3.12. Infrared (IR)
Power supply unit (PSU)
Manufacturing terms
4.1. Machining
Surface treatment
2.4.8. Driver
4.2.2. Silicone
2.4.9. Pulse width modulation (PWM)
4.2.3. VP – Vacuum Plating
2.4.10. visDIM
The goniophotometer is a piece of photometric testing equipment that measures light intensity at a given angle to the luminaire or light source. The data a goniophotometer records can be used to generate photometric files (e.g. ies, ldt, etc) which digitally model the output of a luminaire and allows it to be loaded into lighting design software.
2.5.3. Die
1.1.
1.1.3. Optic
Photometric testing
1.2.11. Goniophotometer
Defined as the number of lumens produced from a luminaire, divided by Wattage of power provided, lumens per Watt (lm/W).
2.5.2. Phosphors
3.1.1. UKAS
1.2.7.
1.2.5. Luminaire efficacy
1.2.3. Illuminance & Lux Illuminance is the number of lumens falling per square metre, measured in lux (lx). 1.2.4. Candela (cd) Is the measurement of luminous intensity within a narrow cone, calculated by:
Refers to the percentage of emitted radiation within the visible spectrum compared to the emitted radiation outside the visible spectrum, including UV, IR and heat. A light source that is 45% efficient would turn 45% of the input power into visible light and the remaining 55% would be emitted as waste radiation. 1.2.7. Photometric testing The science of measuring light intensity, colour and quality of light perceived by the human eye. 1.2.8. Absolute photometry The collected photometric data produced from testing a finished and complete solid state lighting system (as supplied to end users) under realistic conditions. Essential for accurate comparison and evaluation of LED lighting products. Data produced allows true specification of luminous flux, chromaticity, efficacy and electrical power. Absolute photometry is the basis of the IESNA LM79 testing standard. 1.2.9. Relative photometry Data set produced from comparative photometric testing using a reference light source or by separation of light source from other parts of the system. Some figures may be obtained by normalisation calculations. Provides at best only a partial description of LED product performance. 1.2.10. Integrating sphere Part of the testing system used for photometric measurements and is the most accurate way of measuring total luminous flux, colour temperature and colour properties.
1.3. Colourimetry 1.3.1. Colour Space (CIE colour space/chromaticity diagrams) A theoretical colour concept illustrated by a series of graphical projections mathematically representing all visible colours of light. The International Commission on Illumination (CIE) has defined several of these spaces – the CIE 1931 colour space and CIE 1976 CIELUV colour space being the most widely referenced in lighting. A three dimensional colour space is projected as a two dimensional chromaticity diagram on which other colourimetric scales, such as CCT ranges and the Planckian locus, can be overlaid. Measured colorimetric data for LED sources can be plotted and compared to illustrate colour performance and consistency between products and relative to the colour specifications of lighting test standards. 1.3.2. Kelvin (Correlated Colour Temperature – CCT) In lighting, Kelvin is the system adopted to define colour of white light with a single-number. It compares the colour of a black body conductor emitting light when being heated to the given temperature in degrees Kelvin (K). It is important to note that CCT can only relate a light source to the closest Kelvin value of a black body conductor, and thus does not account for hue shift within the colour. 1.3.3. Planckian locus/ Black body line The plot of colour temperature (CCT) that a black body conductor or tungsten filament produces as it is heated up through degrees Kelvin.
luminous flux ÷ unit solid angle. This is often the quantitative figure used to describe the output of directional lamps.
252
General Information
General Information 253
1.3.4. MacAdam Ellipse (SDCM)
1.3.7. Colour rendering index (CRI)
1.3.11. Ultraviolet (UV)
2.1.6. Alternating current (AC)
2.1.10. Interference
2.2.4. Integrated circuit (IC)
The results of a statistical study being plotted on to a colour space diagram. The spread of results is defined within an elliptical plot, the edges of which represent a set deviation in colour from that at its centre. The scale of the ellipse is determined by the number of standard deviations of colour matching or ‘steps’ used in plotting.
Is the method of measuring how well a light source renders a specific set of colours. CRI is based on 14 colour samples, the first 8 in the set are pastel colours arranged around the hue circle, 9 to 14 are colours of special significance (skin tone, organic materials etc.). A blackbody radiator such as an incandescent lamp and natural midday sun (5000-6000K) will have a CRI of 100%.
A range of non-visible radiation with wavelengths less than 380nm beyond the blue end of the visible spectrum. Protection from the sun’s UV radiation is required to prevent degradation of plastics and other materials used in exterior lighting products.
When the current flow in a circuit alternates or reverses direction at regular intervals. Used for transmission and distribution of industrial and household power.
Unwanted distortions in a digital signal or analogue wave. Interference causes control inaccuracies and loss of data. In extreme cases, total loss of control.
A circuit or collection of circuits mounted on a small plate of semiconductor material, most commonly silicon. IC’s have a range of applications, for LED technology the most common uses for IC’s are voltage and current control within circuits.
1.3.5. Saturation/saturated Describes the amount of colour compared to white within a colour. 0% saturated would be a black and white image, whereas fully saturated would be vivid colours (at the very edge of the CIE colour space diagrams). 1.3.6. Hue
520
MacAdam ellipses examples
0.8
540
0.7 560 0.6 500 0.5 y
580 Tc(°K)
4000
2000 1500
10000
0.3
3000 2500
6000
0.4
490
600 620 700
∞
0.2
Planckian locus 480
0.1 0.0 0.0
470 460 0.1
380 0.2
0.3
0.4 x
0.5
0.6
0.7
0.8
CIE 1931 xy chromaticity diagram
R3
R2
R4
R5
R6
R7
R8
R9 R10 R11 R12 R13 R14
1.3.8. Rendering average (Ra) The average of the rendering values for the first 8 colour samples for a given light source.
Infrared radiation is non-visible electromagnetic radiation with a longer wavelength than visible light beyond the red end of the spectrum. Infrared radiation includes thermal radiation which is used for thermal imaging.
Often referred to when describing circuits and products’ power requirements. A constant current product or component would require a power source (driver) to vary voltage to maintain the desired current. Constant current products are most commonly wired in series circuits.
Defined as the potential difference across a conductor, often referred to as the electrical force or pressure that drives a circuit. Unit of measurement is Volts (V).
The individual LED chips on the circuit boards of power LED products are supplied with a constant current power source for stable performance and control of thermal output. The voltage supplied varies to accommodate multiple chips. Almost all KKDC LED products employ on-board constant current conversion of an external constant voltage power supply.
2.1.2. Current
2.1.8. Constant voltage
Spectral Radiant Flux versus Wavelength
Measured in Amperes (Amps, A) is the flow of electric charge. Electric charge flows when there is a voltage or electric potential difference between connected conductors.
Often referred to when describing circuits and products’ power requirements. A constant voltage component or product would require a power source to vary current to maintain the desired voltage.
1.3.10. Wavelength
2.1.3. Resistance
Light is considered as a wave, and has measureable wavelengths, it is the wavelength of light that determines its type of electromagnetic radiation. The distance between the successive waves is defined as its wavelength. Within the visible spectrum, it is the combined visual power of light at every given wavelength that makes up a light sources apparent colour.
Measured in Ohms (Ω) defines the resistance against current flow when a voltage or electrical potential is present.
Constant voltage products are most commonly wired in parallel circuits.
2. Electrical
1.3.9. Spectral power distribution Displayed in graph form, plotting emitted radiation power against wavelength. By integrating the graph/function you would get the wattage of light being emitted. Spectral Radiant Flux versus Wavelength 2.00E-03 1.80E-03 1.60E-03
2.1.
General Electrical
2.1.1. Voltage
1.40E-03 1.20E-03 1.00E-03 8.00E-04 6.00E-04 4.00E-04 2.00E-04 0.00E+00
Is the attribute based on classification of colour as reddish, yellowish, greenish, CIE 1931 xy intermediaries. chromaticity diagram bluish or their 0.9
R1
Spectral Radiant Flux (W/nm)
The colour variation represented by a 1-step MacAdam ellipse in not visible but becomes progressively more discernible in ellipses with a greater number of steps and becomes apparent to most observers above 2 or 3 steps. MacAdam ellipses are sometimes quoted in the specifications of white LED products to quantify colour consistency. Standard Deviation Colour Matching or SDCM has the same meaning as MacAdam ellipse.
1.3.12. Infrared (IR)
2.1.7. Constant current
350
400
450
500
550
600
650
700
750
800
Wavelength (nm)
LED dice producing light in the visible spectrum, emit light of wavelengths ranging from around 330 to 780 nanometres – a specified range of wavelengths indicating the colour of light produced. In most white LED’s, phosphors absorb the shorter blue wavelengths and re-emit light at a wider range of longer wavelengths.
2.1.4. Wattage Is the measure of work done, or energy consumed most commonly known as power. Unit of measurement is Watts (W). One Watt is defined as the work done when one ampere (A) of current flows through an electrical potential difference of one volt (V). 2.1.5. Direct current (DC) Is when the direction of current flow in a circuit remains constant, the type of supply you would expect from a battery.
2.1.9. Power factor In AC circuits, power factor is the ratio of real power to apparent power in the circuit. This power loss is caused by components in the circuit pushing the current flow out of phase with the voltage. A power factor of 1, is achieved when the current and voltage are in unity, whereby the real power and apparent are equal. A power of 0 is achieved when the current is 180° out of phase with the voltage, and no power can be delivered to the load. i.e When power factor is less than 1, more power is required to produce the desired output. Example of calculating power factor: PSU has power factor or 0.85. If you want to power 100W then you will need to input: 100 ÷ 0.85 = 117.6W
254
General Information
2.1.11. Parasitic capacitance The effect of closely located conductors acting as capacitors which can cause unwanted electromagnetic effects, due to induced oscillations into circuits and components that are not intended to be there. This is quite often the major cause of interference within dimming controllers. High inrush currents can also be a result of poorly managed parasitic capacitance. 2.1.12. Inrush current Refers to the initial current draw when first switching on a component, circuit or electronic device. The inrush current is often a multiple of the normal operating current. When dealing with LED circuits, high inrush currents can cause chip fatigue due to heat leading to colour drift over time. In extreme cases can lead to premature chip failure. 2.2. Electrical & Electronic Components 2.2.1. Printed circuit board (PCB) An assembly of single or multi-layered mounting surfaces with conductive tracks (and soldered components) found at the heart of most modern electronic devices. Most KKDC products use metal based PCB technologies which provide significant advantages in thermal management. As a result KKDC’s metal based flexible linear products can be used without additional heat sinking. 2.2.2. Capacitor A component that temporarily stores electrical charge, having many uses including signal filtering and stabilising voltage and power flow. 2.2.3. Resistor A circuit component which has a specific resistance measured in Ohms (Ω). May have multiple applications including reducing voltages for component requirements or used as parameter settings for certain IC’s.
2.2.5. Diode A circuit component with asymmetric conductance, meaning that current will only flow in one direction. Some diodes also emit light (LED’s) in response to the passage of current in a phenomenon called electroluminescence. 2.2.6. Bridge rectifier A combination of 4 diodes arranged in a way that converts AC supply to DC. 2.3. Installation 2.3.1. Series circuit PSU When components, or products, are wired from positive to negative, or in series, throughout the circuit. PSU
2.3.2. Parallel circuit When all components, or products, in the circuit share common positives and negatives. PSU
2.3.3. AWG PSU Abbreviation for ‘American Wire Gauge’ – a numerical scale for wire size. The AWG number relates to the diameter, cross sectional area and thus the current carrying capacity of electrical wires.
By contrast, in the Metric system electrical conductors are described directly by cross sectional area in mm2 or in stranded wires by the number and size of the strands.
General Information 255
2.3.4. IP rating Ingress protection rating refers to a specific set of numbers that refer to a products ability to prevent intrusion from solid objects (including fingers and dust) and water. IPXX The first digit of the IP code indicates the degree of protection against contact with internal components and the degree of protection against foreign bodies intruding into the product enclosure. 0 No special protection 1 Protection from large solid objects, greater than 50mm in diameter. 2 Protection against fingers sized objects not greater than 80mm in length and 12mm in diameter. 3 Protection from entry by tools, wires, etc., with a diameter of thickness greater than 2.5mm. 4 Protection from entry by solid objects with a diameter or thickness greater than 1.0mm 5 Dust protected, limited ingress of dust permitted. 6 Dust tight. IPXX The second digit indicates the degree of protection the product has against various forms of moisture and liquid. 0 No special protection Limited ingress permitted. 1 Protection from dripping water. Limited ingress permitted. 2 Protection from vertically dripping water when enclosure is tilted to 15° from vertical. Limited ingress permitted. 3 Protection from sprays of water at 60° form vertical. Limited ingress permitted. 4 Protection from low pressure water jets from all directions. Limited ingress permitted. 5 Protection from high pressure water jets from all directions. Limited ingress permitted. 6 Protection against heavy seas, or powerful jets of water. Limited ingress permitted. 7 Protection against temporary immersion at a depth of 150~1000mm. 8 Protection against complete, continuous submersion in water at a specified depth*. * Submersion depth must be specified by the manufacturer.
256
General Information
2.4.
Lighting control
2.4.1. Control gear In general lighting, control gear is a term for any additional electronics that are required to power or control a luminaire, such as; a ballast for florescent, PSU or driver for LED or a dimming sub-controller. 2.4.2. DALI – Digitally Addressable Lighting Interface A digital communication protocol originally developed for the centralised control of fluorescent lighting in buildings and now also used for control of LED installations. 2.4.3. DMX A digital communication protocol for control of dimming, colour change and other control parameters. Used extensively in the theatre and entertainments industry and has become a commonly used method for digital control of architectural lighting. 2.4.4. 1-10V A standard convention for control of dimming used in LED lighting – originally developed for fluorescent lighting. An analogue control voltage is varied between 0 and 10 Volts by means of a potentiometer or other controller and produces a corresponding change in the pulse width modulated power supplied to an LED circuit and thus the brightness. Following is helpful for quick 1-10V on-site testing: Shorted (10V) = lowest output (0%) Open (0V) = highest output (100%) 2.4.5. 0-10V Often referring to the same operation of 1-10V, 0-10V can mean that a subcontroller or dimmable fitting is set up to receive a control voltage generated by the master controller. A resistive dimmer may not work with a 0-10V system so it is worth checking the exact meaning from the manufacturer. KKDC have adopted the following understanding: • 1-10V – device will operate and respond to resistive control, and receiving supply control voltage. • 0-10V – device will only operate when supplied with a control voltage.
2.4.6. KNX A standardised control protocol for intelligent building control. The standard is administered by the KNX Association, where by a list of compliant manufactures are listed on the KNX website. Its aim is to standardise control protocol to avoid compatibility issues through the systems used in building control. 2.4.7. Power supply unit (PSU) Refers to the devise that produces the, normally low voltage, DC signal for equipment and lighting products. PSU’s have a wide range of power variations available with various constant current or constant voltage outputs. Also dimmble PSU’s are available, which normally receive a control signal and output a PWM supply to the light source. 2.4.8. Driver General term for a power supply unit or power supply circuit. KKDC have adopted the following understanding: • PSU – for constant voltage power sources • Driver – for devices performing constant current power conversion 2.4.9. Pulse width modulation (PWM) An electronic method for varying the power supplied to LED light sources through rapid switching. Adjustment of pulse duration or duty cycle gives rise to variations in brightness for dimming and colour mixing. 2.4.10. visDIM KKDC’s term for the technology in our range of dimmable sub-controllers and dimmable PSU’s, which utilise a high frequency PWM output of 1.1~1.2KHz. visDIM provides extremely stable dimming environments for a range of dimming protocols.
2.5. LED
2.5.6. LED lifetime
2.5.9. Thermal management
2.5.1. Bin/Binning
The useful lifetime of an LED light source in hours.
Referring to the practical steps taken by the designers of LED packages and LED lighting products, to ensure that heat is conducted and dissipated away from the light producing junction within an LED package. In general, higher LED light output requires more electrical power which, in turn, generates more heat. Failure to address this adequately leads to degradation of output power, colour quality and ultimately premature LED failure.
During manufacture, LED dice will have significant performance variations and can be sorted or ‘binned’ in to smaller groups according to spectral distribution, luminous intensity and forward voltage for example. The application of phosphors during the packaging of white LED’s introduces further variations in colour and performance which may in turn be ‘binned’. The scale and parameters of the bins used will often determine the colour consistency and cost of finished white LED products – (coordinates (x, y or u’, v’) of quadrangles on colour space plots are used to document colour consistency of binned white LEDs).
L70 (lifetime to 70% of initial lumen output) has become a standard way of stating lifetime. The length of time an LED light source actually performs to an acceptable standard, depends on most aspects of design and manufacture, including quality of source components and thermal, electrical and environmental operating conditions.
2.5.2. Phosphors
2.5.7. LED package
Absorbs a specific spectrum of wavelengths and re-emits light a wider range of wavelengths. In most white LEDs, the die is emitting a small range of blue wavelengths and the phosphor is absorbing this and re-emitting light across the green and red
An assembly or encapsulation of one or more LED dice that contains wire bond connections along with any phosphors, optical elements and thermal or mechanical structures.
2.5.3. Die
Poor design, components, manufacture or operation can result in premature loss of light output, colour shifts and failure. The LM80 lumen maintenance test can provide data that can be extrapolated to give more reliable L70 lifetime figures.
The complete LED component for incorporation into arrays and finished products.
Term for the manufactured semiconductor junction component/s within an LED package. A 3 chip or tri-chip LED having 3 dice in a single LED package.
2.5.8. Temperature – Ta/Tc/Tj
2.5.4. LED array
Values for these are often quoted in the testing of LED components, specification of LED products and discussion of thermal design of LED products.
An assembly of LED packages on a printed circuit board or substrate. 2.5.5. Heat sink In LED lighting – a component or assembly to conduct and dissipate heat away from an LED package. KKDC products have heat sinking elements as integral parts of the product design and require no additional heat sink under all normal operating conditions.
Ta – Ambient temperature; Tc – Reference point (Case) temperature; Tj – Junction temperature.
Tj is the temperature at the semiconductor junction within an LED die. Heat produced must be removed by efficient thermal design of LED package, PCB and housing in order that Tj does not exceed a specified maximum (Tj max) or degradation of performance and failure may occur. Ta is the temperature of the surroundings. In KKDC specifications Ta is given as a range of temperatures within which the product is designed to operate. Tc, in testing of products, may refer to any named reference point where temperature is measured. In KKDC products Tc is given as a maximum value which the outside of a product housing or mounting may reach in operation within the Ta range given.
2.5.10. Thermal resistance Describes the heat conducting or transferring properties of a material, component or assembly. Expressed in degrees Celsius per Watt (°C/W). Thermal resistance is minimised in the design of high quality LED lighting products. 3. Standards 3.1. Organisations 3.1.1. UKAS The United Kingdom Accreditation Service, quoted from the UKAS website, about UKAS section; ‘The United Kingdom Accreditation Service is the sole national accreditation body recognised by government to assess, against internationally agreed standards, organisations that provide certification, testing, inspection and calibration services.’ UKAS also provide an online accreditation Test Schedule, which anybody can use to see what companies are accredited and what measurements the organisation can perform under the accredited conditions. 3.1.2. IEC International Electrotechnical Commission, quoted from IEC website, about IEC; ‘Millions of devices that contain electronics, and use or produce electricity, rely on IEC International Standards and Conformity Assessment Systems to perform, fit and work safely together. It is the IEC for instance, who produced IEC 60598-1 for Luminaires – Part 1: General requirements and tests
General Information 257
3.1.3. BSI British Standards Institution. A business standards company providing manufacturers and service providers with assessment, certification and specification of British, European and international standards and quality marks. 3.1.4. IESNA Illuminating Engineering Society of North America (IES or IESNA) are a non-profit organisation whose mission statement is: ‘The IES seeks to improve the lighted environment by bringing together those with lighting knowledge and by translating that knowledge into actions that benefit the public.’ The IES have developed some of the now commonplace global standards for measuring light such as LM79, and LM80. The IES constantly updates standards to reflect the evolving industry. 3.1.5. ANSI The American National Standards Institute. Co-ordinates and accredits national and international standards meeting the needs of American organisations and companies. Lighting performance is one area in which their standards have reached international prominence. 3.1.1. OSHA Occupational Safety and Health Administration is the main federal agency in the U.S. that is charged with the enforcement of safety and health legislation. Their Nationally Recognised Testing Laboratory (NRTL) Program recognises independent or private sector laboratories or organisations and signifies that qualifications specified in the regulations are met and maintained. 3.1.1. ISO Comprised of representatives from various national standards organisations, the International Organisation for Standardisation produces international standards.
258
General Information
3.2. Standards 3.2.1. LM79-08 LM79-08 defines the “Approved Method: Electrical and Photometric Measurements of Solid-State Lighting Products” developed by the IES. It provides absolute photometric, colorimetric and electrical data for luminous flux, chromaticity, CCT and CRI for complete LED products. LM79 allows fair comparison of LED lighting products and evaluation for use in particular environments. KKDC products have been independently tested by an accredited UK laboratory and testing facility to the LM79 standards. 3.2.2. LM80 Developed by the IES is the standard for “Approved method for measuring lumen depreciation of LED light sources.” It is important to note that LM80 covers light sources (LED chips, arrays and modules) not lamps and luminaires.
3.2.6. WEEE
4.2.2. Silicone
The Waste Electrical and Electronic Equipment Directive is the European Community directive 2002/96/EC developed to reduce the amount of waste electrical and electronic equipment being scrapped into landfills by promoting recycling.
Any one of a class of largely inert, synthetic polymer compounds used for sealing and encapsulation in some KKDC products. Thermal, optical and environmental factors govern the choice of compound for a particular application.
4.
A protective conformal coating produced by vacuum deposition polymerisation techniques on circuit boards and assemblies to prevent dust and moisture ingress. KKDC use this process within some products to enhance waterproofing and protection of components.
Manufacturing terms
4.1. Machining 4.1.1. Extruding Extruding or extrusion is a process of manufacturing an object with a fixed cross section. The process involves a material being pushed or drawn through a mould or die of the desired cross section. KKDC uses this process for housing and diffused and clear cover production. 4.1.2. CNC machining
It provides guidance for measuring lumen maintenance by testing for at least 6000 hours at 3 different case temperatures: 55°C, 85°C and another manufacturer specified.
An automated machining process in manufacturing; drilling, milling or cutting material as per a digital program or drawing. KKDC utilises in-house CNC machining for manufacture of end caps and SIL end caps for example.
3.2.3. TM-21
4.1.3. Ultrasonic welding
TM-21 provides the extrapolation method for LM-80 measurements. This provides lumen maintenance predictions for either 5.5 or 6 times the measured data, dependant on sample size tested.
A low heat method for joining suitable plastics, utilised in KKDC’s Luna range.
3.2.4. CE Mandatory conformity marking for products sold in the European Economic Area (EEA). The marking is the manufacturer’s declaration that the product meets the specific requirements applicable to that product. 3.2.5. RoHS Directive 2002/95/ECN The Restriction of Hazardous Substances Directive (RoHS), is a European directive that has become law in EC member countries now law that restricting the use of several hazardous materials in the manufacture of electronics.
4.2.3. VP – Vacuum Plating
4.1.4. SMT SMT stands for surface-mount technology. Replacing through hole techniques in the production of electronic circuit boards, SMT allows more compact products and more automation in their manufacture. KKDC has SMT machine processes in the manufacture of all our linear LED light sources. 4.2.
Surface treatment
4.2.1. Anodising An electrolytic process producing a very hard oxide layer on the surface of aluminium parts. Anodising can protect against corrosion in harsh chlorinated or marine environments and can also incorporate coloured dyes for decorative effect.
General Information 259
KKDC Global
Terms and Conditions
KKDC UK/Global
KKDC France
KKDC Scandinavia
KKDC Korea/Factory
KKDC Japan
The Leather Market Unit 9G1 11-13 Weston Street London SE1 3ER United Kingddom
20-22 Passage Dauphine 75014 Paris France
Nykroppagatan 19 12332 Farsta Sweden
Tel: 0033 (0) 1406 417 44 Fax: 0033 (0) 1432 787 50
Tel: 0046 (0) 854 900 634
503, Woori Venture Town 684-2 Deungchon-dong Gangseo-Gu, Seoul Republic of Korea, 157-754
Jyonan Building 4F 55 Zaocho Nishikujyo Minami-Ku, Kyoto 601-8414 Japan
Tel: 0044 (0) 203 142 6678 Fax: 0044 (0) 203 002 2712
Email: alistair@kkdc.co.uk
Email: anne@kkdc.fr
Tel: 0082 (0) 2366 29333 Fax: 0082 (0) 2366 29340
Tel: 0081 (0) 75693 8900
Email: info@kkdc.co.kr
Email: info@kkdc.co.jp
Email: info@kkdc.co.uk KKDC China
KKDC Singapore
KKDC Australia/Global
KKDC New Zealand
KKDC USA
Room 603, Building B, 26 Juixianqiao Middle Road Chaoyang District Beijing 100015 P.R.C
438 Alexandra Road # 17-02/03 Alexandra Point Singapore 119958
Suite 4, 20 Cliff Street Milsons Point NSW 2061 Australia
4 Water Street Grafton Auckland 1023 New Zealand
Email: info@kkdc.co.uk
Tel: 0061 (0) 2 9922 5570 Fax: 0061 (0) 2 9922 5574
Tel: 0064 (0) 9 951 5387
Tel: 0086 (0)10 8456 9372 Email: info@kkdc.com.cn
Email: info@kkdc.com.au
Email: jina@kkdc.com.au
Email: info@kkdc.co.nz
Trading partners Middle East
Middle East
Singapore
Singapore
HongKong
Huda Lighting Bayt Al Tawreed Trading LLC Umm Suqueim Road, Al Quoz P.O. Box 212060 Dubai, UAE
Al Hassan Electricals Co. L.L.C. P.O. Box 1948 P C 112 Ruwi, Muscat Sultanate of Oman
Bizlink Associates (S) Pte Ltd 41 Ubi Crescent Singapore 408588
LuxLight Pte Ltd 80 Genting Lane, #08-01/05 Genting Block Ruby Industrial Complex Singapore 349565
Zodiac Lighting Limited 1801, 18/F, Hong Man Industrial Centre 2 Hong Man Street Chaiwan, HongKong China
Tel: 00971 (0) 4 341 1301 Fax: 00971 (0) 4 341 2699 Email: info@hudalighting.com
260
General Information
Tel: 00968 (0) 2481 0575 Fax: 00968 (0) 2481 0287 Email: info@al-hassan.com
Tel: 0065 6747 7116 Fax: 0065 6841 0541 Email: sales@ bizlink-lighting. com.sg
Tel: 0065 6278 8588 0065 91512374 Fax: 0065 6278 1141 Email: sales@luxlight.sg Web: www.luxlight.sg
Tel: (852) 2898 7611 Fax: (852) 2558 3114 Email: mail@zodiaclighting.com
1. THESE TERMS AND CONDITIONS OF SALE ESTABLISH THE RIGHTS, OBLIGATIONS AND REMEDIES OF KKDC AND THE CUSTOMER WHICH APPLY TO ANY CONTRACT FOR THE PURCHASE OF KKDC’S GOODS. NO ADDITIONAL OR DIFFERENT TERMS OR CONDITIONS, WHETHER CONTAINED IN THE CUSTOMER’S ORDER FORM OR ANY OTHER DOCUMENT OR COMMUNICATION PERTAINING TO THE CUSTOMER’S ORDER, WILL BE BINDING UPON KKDC UNLESS ACCEPTED IN WRITING, AND KKDC HEREBY EXPRESSLY OBJECTS TO ANY SUCH TERMS AND CONDITIONS WHICH SHALL BE DEEMED INEFFECTIVE AND ARE REJECTED 2. Interpretation 2.1 In these conditions, unless the contrary intention appears: 2.1.1 Confidential Information has the meaning as set out in clause 15.1; 2.1.2 contract means any contract or agreement whatsoever made by KKDC to supply any goods to the customer, whether resulting from the acceptance by KKDC of an order given by a customer, the acceptance by a customer of a quote from KKDC or otherwise; 2.1.3 contract price means the total of the prices specified for the Supply by KKDC to a customer; 2.1.4 KKDC means KKDC Pty Ltd ACN 117 624 370 being a company duly incorporated under the laws of Australia and having its registered office at Suite 305, 160 Rowe Street, Eastwood in the State of New South Wales; 2.1.5 customer means a customer of KKDC who buys goods from KKDC; 2.1.6 goods means any or all of the products the subject of Supply by KKDC to a customer; 2.1.7 order means any offer to purchase the goods from KKDC made by a customer; 2.1.8 parties means both KKDC and the customer; 2.1.9 party means KKDC and the customer; 2.1.10 price means, in relation to any goods, the price of those goods; 2.1.11 Supply means the supply of any goods the subject of any contract; and 2.1.12 Tax means sales tax, GST, value added tax, retail tax or any other tax or duty that may be imposed on or in relation to any Supply made by KKDC; 2.1.13 a reference to a clause is a reference to a clause of these conditions; 2.1.14 where any word or phrase is given a definite meaning in these conditions, any part of speech or other grammatical form of that word or phrase has a corresponding meaning; 2.1.15 a reference to a statute, statutory provision or regulation includes all amendments, consolidations or replacements thereof; 2.1.16 headings and captions are for convenience or reference only and do not alter the meaning or interpretation of these conditions; 3. Orders & Specifications 3.1 The customer shall be responsible for ensuring the accuracy of the terms of any order (including any applicable specification) submitted by the customer, and for giving KKDC any necessary information relating to the Supply within a sufficient time to enable KKDC to perform the contract in accordance with its terms.
3.2 The quantity, quality and description of and any specification for the Supply shall be those set out in the quotation (if accepted by the customer) or the customer’s order (if accepted by KKDC). 3.3 If the goods are to be manufactured or any process is to be applied to the goods by KKDC in accordance with a specification submitted by the customer, the customer shall indemnify KKDC against all loss, damages, cost and expenses awarded against or incurred by KKDC in connection with or paid or agreed to be paid by KKDC in settlement of any claim for infringement of any patent, copyright, design, trade mark or other industrial or intellectual property rights of any other person which results from KKDC’s use of the customer’s specification. 3.4 KKDC reserves the right to make any changes in the specification of the goods which are required to conform to any applicable statutory requirements or, where the goods are to be supplied to the customer’s specification, which do not materially affect their quality or performance. 3.5 No order which has been accepted by KKDC may be cancelled by the customer except with the written consent of KKDC and on terms that the customer shall indemnify KKDC in full against all loss (including loss of profit), costs (including the cost of all labour and material used), damages, charges and expenses incurred by KKDC as a result of cancellation. 3.6 The customer may issue a written change order to request changes within the scope of the contract. Such requests are subject to acceptance by KKDC. 3.7 KKDC will inform the customer if the change will cause an increase in KKDC’s costs or time required to perform the contract. The change will become effective, and KKDC will commence performance, only upon execution of a written amendment to the contract. 3.8 Unless otherwise agreed in writing, upon performance of the change order KKDC will be entitled to invoice the customer and the customer shall be obligated to pay for the costs of the change, even if KKDC agreed to proceed with the change prior to execution of an amendment. 3.9 KKDC reserves the right to establish minimum order sizes or to reject purchase orders if KKDC does not have sufficient capacity to fulfil such orders. 3.10 KKDC reserves the right to change its prices if series production ends, or if, from the time of quotation: 3.10.1 raw material prices have changed; or 3.10.2 actual volume is less than forecast volume; or 3.10.3 there is any significant change in economic circumstances. 4. Terms of Payment 4.1 Time for payment of the price for any Supply is of the essence in any contract. 4.2 Payment must be made in the applicable currency quoted. 4.3 If KKDC: 4.3.1 accepts an order, and KKDC has not agreed in writing to extend credit to the customer, the customer must pay the contract price to KKDC in full on delivery of the goods; or
4.3.2 has agreed in writing to extend credit to the customer, the customer must pay the contract price to KKDC in full prior to the end of the month following the date of the invoice sent by KKDC in relation to that Supply. 4.4 If the customer is delinquent in its payment obligation to KKDC, KKDC may upon written notice to the customer stop work and withhold future shipments until all delinquent amounts and late interest, if any, are paid. Additionally, KKDC may at its option: 4.4.1 repossess goods for which payment has not been made; 4.4.2 charge interest on delinquent amounts at the maximum rate permitted by law for each full or partial month; 4.4.3 recover all costs of collection, including but not limited to reasonable legal fees; 4.4.4 combine any of the above rights and remedies as may be permitted by applicable law. 4.5 These remedies are in addition to all other remedies available at law or in equity. 4.6 KKDC may re-evaluate the customer’s credit standing at all times. 4.7 If KKDC reasonably determines in its sole discretion that the customer fails to qualify for the above payment terms at any time, then KKDC may without notice to Buyer modify or withdraw credit terms, including but not limited to requiring advance payment, guarantees, or other security. 5. Setoff 5.1 The customer will not set off or recoup invoiced amounts or any portion thereof against sums that are due or may become due from KKDC. 6. Taxes 6.1 All prices are in the applicable currency of the contract. 6.2 If, notwithstanding the provisions hereof, the customer’s terms and conditions of purchase are deemed to apply by a court of competent jurisdiction, then KKDC reserves the right to either:6.2.1 modify the prices (including retroactively) according to the additional level of risk and responsibility that the customer’s terms and conditions require KKDC to undertake; or 6.2.2 cancel the contract any time after such determination without liability for such termination other than for the goods already delivered on the terms set out herein; 6.3 Unless otherwise expressly agreed by, or shown on an invoice issued by KKDC, the prices specified do not include any charges for services such as packaging; insurance; or brokerage fees. KKDC’s pricing excludes all taxes (including but not limited to, sales, use, excise, value-added, and other similar taxes), duties and charges. 6.4 The customer is responsible for all such taxes, duties and charges resulting from a contract or as a result of KKDC’s performance hereunder, whether now or hereafter imposed, levied, collected, withheld, or assessed. 6.5 If KKDC is required to impose, levy, collect, withhold or assess any such taxes, duties or charges on any transaction under these terms, then in addition to the price, KKDC will invoice the customer for such taxes, duties, and charges unless at the time of order placement the customer furnishes KKDC with an exemption certificate or other documentation sufficient to verify exemption from such taxes, duties or charges.
General Information 261
7. Delivery and Costs 7.1 KKDC will not be liable for any delays or increased costs caused by a failure of the customer, such as delays in providing necessary information. 7.2 KKDC may, but is not obliged to, deliver the goods to the customer’s premises, in accordance with KKDC’s usual practices, but if: 7.2.1 the customer requests another method of delivery; or 7.2.2 KKDC elects to use an independent courier to deliver the goods; KKDC may arrange another form of transport with that independent courier by a separate contract, and the customer must pay to KKDC on demand any costs of that courier incurred by KKDC. 7.3 KKDC reserves the right to quote additional charges for any special routing, packing, labeling, handling or insurance required by the customer. 7.4 Where the goods are to be delivered in installments, each delivery shall constitute a separate contract and failure by KKDC to deliver any one or more of the installments in accordance with these conditions or any claim by the customer in respect of any one or more installments shall not entitle the customer to treat the contract as a whole as repudiated. 7.5 If KKDC fails to deliver the goods (or any installment) for any reason other than any cause beyond KKDC’s reasonable control or the customer’s fault, and KKDC is accordingly liable to the customer, KKDC’s liability is limited to the excess (if any) of the cost of the customer (in the cheapest available market) of similar goods to replace those not delivered over the price of the goods. 7.6 If delivery of the goods fail (otherwise than by reason of any cause beyond the customer’s reasonable control or by reason of KKDC’s fault) then, without prejudice to any other right or remedy available to KKDC, KKDC may: 7.7 Store the goods at the customer’s risk and expense and, may invoice the customer just as if there had been no delay in delivery and charge the customer for the reasonable costs (including insurance) or storage; or 7.7.1 Sell the goods at the best readily obtainable and (after deducting all reasonable storage and selling expenses) account to the customer for the excess over the price under the contract or charge the customer for any shortfall below the price under the contract 8. Export and Import Compliance 8.1 The customer is responsible for compliance with all import and export control laws and regulations. The customer will obtain import, export, and re-export approvals and licenses required for goods delivered and will retain documentation evidencing compliance with those laws and regulations. 8.2 KKDC will not be liable to the customer for any failure to provide goods as a result of government actions that impact KKDC’s ability to perform, including: 8.2.1 The failure to provide or the cancellation of export or re-export licenses; 8.2.2 Any subsequent interpretation of applicable import, transfer, export or re-export law or regulation after the date of any order or commitment that has a material adverse effect on KKDC ‘s performance; or
262
General Information
8.2.3 Delays due to the customer’s failure to follow applicable import, export, transfer, or re-export laws and regulations. 8.3 If the customer designates the freight forwarder/independent courier for export shipments from Australia, then the customer’s forwarder/independent courier will export on the customer’s behalf and the customer will be responsible for any failure of the customer’s forwarder/independent courier to comply with all applicable export requirements. KKDC will provide the customer’s designated freight forwarder/ independent courier with required commodity information. 9. Hardship 9.1 If for any reason KKDC’s production or purchase costs for the goods (including without limitation costs of energy, equipment, labour, regulation, transportation, raw material, or goods) increases over KKDC’s production or purchase costs for the goods on the date of entering into a contract, then KKDC may, by written notice to the customer of such increased costs, request a renegotiation of the price of the goods under a contract. In the event the parties are not able to agree on a revised price within 10 days after a request for renegotiation is given, then KKDC may terminate the contract on 10 days written notice to the customer. 10. Acceptance 10.1 Unless other acceptance criteria have been expressly agreed to by the parties under a contract the customer will inspect goods within a reasonable period after delivery not to exceed 30 calendar days. 10.2 Goods are presumed accepted unless KKDC receives written notice of rejection explaining the basis for proper rejection within the same timeframe. 10.3 KKDC will have a reasonable opportunity to repair or replace rejected goods, at its option. 10.4 Following initial delivery, the party initiating shipment will bear the risk of loss or damage to goods in transit. 10.5 If KKDC reasonably determines that rejection was improper, the customer will be responsible for all expenses caused by the improper rejection. 10.6 Subject to clause 10.5, KKDC assumes shipping costs in an amount not to exceed normal surface shipping charges to KKDC’s designated facility for the return of properly rejected goods. 11. Title and Property 11.1 The title to and property in the goods will not pass from KKDC to the customer until the customer has paid the contract price in full (other than the costs of any independent courier referred to in clause 7.2) to KKDC in accordance with these conditions. Until then, the customer: 11.1.1 holds the goods in a fiduciary relationship with KKDC as bailee only; 11.1.2 must keep the goods separate from other items it holds and must not resell or transfer possession of the goods; 11.2 If the customer: 11.2.1 fails to pay the contract price in full when due; 11.2.2 pays for the goods by cheque (in whole or in part) and that cheque is not met on presentation;
11.2.3 commits any act of bankruptcy, becomes bankrupt, or is insolvent under administration, as defined in section 9 of the Corporations Act; 11.2.4 is or becomes insolvent within the meaning as given by any of section 9 and subsection 95A (2) of the Corporations Act or regulation 7.5.02 of the Corporations Regulations; or 11.2.5 has a controller appointed, as defined in section 9 of the Corporations Act, in respect of any of the customer’s property; 11.3 KKDC may: 11.3.1 enter onto the premises where the goods are situated; and 11.3.2 repossess the goods, notwithstanding that the goods may have been affixed to any structure by KKDC or the customer, and if necessary for that purpose, may sever the goods from any structure to which they may have been affixed. 11.4 If KKDC repossesses the goods, it reserves the right to resell them. 11.5 The customer must also indemnify and keep KKDC indemnified against, and pay to KKDC, all expenses, loses and damages incurred or sustained by KKDC as a result of, or in relation, to KKDC exercising its rights under: 11.5.1 this clause; 11.5.2 under any other term, express or implied, of these conditions; or 11.5.3 otherwise at law or in equity, and 11.5.4 any bank or other costs, charges or expenses incurred by KKDC resulting from any customer’s cheque not being met on presentation 12. Risk and Insurance 12.1 Notwithstanding clauses 7 and 11, the goods will be at the customer’s risk after they leave KKDC’s premises. 12.2 If the customer requests it in writing, KKDC may, at the customer’s expense, insure the goods. 13. Compliance with Laws 13.1 The customer shall comply with all local laws and regulations applicable to the installation, use or import of all goods delivered under a contract. As a condition of purchase the customer shall comply with all applicable export control laws and regulations of Australia, the United States, the European Union and any other country having proper jurisdiction and shall obtain all necessary export licenses in connection with any subsequent export, re-export, transfer and use of all goods delivered under a contract. 14. LIMITED WARRANTY 14.1 KKDC DISCLAIMS ALL WARRANTIES, WHETHER WRITTEN, EXPRESS, IMPLIED, STATUTORY OR OTHERWISE, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR PARTICULAR PURPOSE. 14.2 No provision of these conditions purports to exclude, restrict or modify or have the effect of excluding, restricting or modifying: 14.2.1 the application in relation to the supply of the goods of any provision of the Trade Practices Act 1974 or of any similar State or Federal legislation that may not be excluded, restricted or modified; 14.2.2 the exercise of a right conferred by such provision; or
14.2.3 subject to clauses 14.2.3.1, 14.2.3.2, 14.2.3.3 and 14.2.3.4 any liability of KKDC for breach of a condition or warranty implied by such a provision of Division 2 of Part V of the Trade Practices Act 1974, or of any similar State or Federal legislation where KKDC may similarly limit its liability, will be limited to any one of the following: 14.2.3.1 the replacement of the relevant goods or the supply of equivalent goods; 14.2.3.2 the repair of the relevant goods (excluding costs of removal and installation) 14.2.3.3 the payment of the costs of replacing the relevant goods, or of acquiring equivalent goods; or 14.2.3.4 the payment of the costs of having the relevant goods repaired; and KKDC may in its sole discretion determine which of the foregoing limits will apply in any case. 15. Confidentiality 15.1 ‘Confidential Information’ means: 15.1.1 any information, technical data or knowhow in whatever form, including, but not limited to, documented information, machine readable or interpreted information, information contained in physical components, mask works and artwork, that is clearly identified as being confidential, proprietary or a trade secret; 15.1.2 business related information including but not limited to pricing, manufacturing, or marketing; 15.1.3 the terms and conditions of any proposed or actual contract between the parties; 15.1.4 either party’s business policies, or practices; and 15.1.5 the information of others that is received by either party under an obligation of confidentiality. 15.2 The receiving party will keep all Confidential Information disclosed hereunder confidential for a period of 5 years following the expiration or termination of a contract. 15.3 Each party will retain ownership of its Confidential Information including, without limitation, all rights in patents, copyrights, trademarks and trade secrets. 15.4 No right or license is granted hereby to a party or its customers, employees or agents, expressly or by implication, with respect to the Confidential Information or any patent, patent application or other Confidential right of the other party, notwithstanding the expiration of the confidentiality obligations stated herein. 15.5 KKDC agrees to use the Confidential Information of the customer only to provide goods for the customer. The customer agrees that it will not use or disclose KKDC’s Confidential Information for any purpose besides the purchase or use of goods under these terms. 15.6 The customer will not use KKDC’s Confidential Information for the manufacture or procurement of parts that are the subject of these conditions or any similar parts or to cause such goods to be manufactured or procured from any other source. 15.7 The receiving party has no duty to protect information that is proven by written records to be: 15.7.1 publicly known at the time of disclosure or becomes publicly known through no fault of recipient; 15.7.2 known to recipient at the time of disclosure through no wrongful act of recipient; 15.7.3 received by recipient from a third party without restrictions similar to those in this section; or
15.7.4 independently developed by recipient 16. Intellectual Property 16.1 Any design, source code, drawing, description, model, documentation, sample and/or the like, created by KKDC, shall remain the intellectual property of KKDC 16.2 Intellectual property may only be used under license from KKDC 16.3 The customer agrees not to remove or alter any indicia of manufacturing contained on or within the goods, including without limitation trademarks on nameplates or cast or machined components. 17. LIMITATION OF LIABILITY 17.1 IN NO EVENT WILL KKDC BE LIABLE TO COMPENSATE OR INDEMNIFY THE CUSTOMER FOR ANY LOSS OR DAMAGE SUFFERED OR INCURRED BY THE CUSTOMER IN RELATION TO THE ORDER, THE GOODS, OR THEIR DELIVERY, MIS-DELIVERY OR NONDELIVERY FOR ANY INCIDENTAL DAMAGES, CONSEQUENTIAL DAMAGES, SPECIAL DAMAGES, PUNITIVE DAMAGES, STATUTORY DAMAGES, INDIRECT DAMAGES, LOSS OF PROFITS, LOSS OF REVENUES, OR LOSS OF USE, EVEN IF INFORMED OF THE POSSIBILITY OF SUCH DAMAGES. 17.2 KKDC’S LIABILITY FOR DAMAGES ARISING OUT OF OR RELATED TO THESE CONDITIONS SHALL IN NO CASE EXCEED THE AMOUNT ACTUALLY PAID TO KKDC FOR THE GOODS FROM WHICH THE CLAIM AROSE. TO THE EXTENT PERMITTED BY APPLICABLE LAW, THESE LIMITATIONS AND EXCLUSIONS WILL APPLY REGARDLESS OF WHETHER LIABILITY ARISES FROM BREACH OF CONTRACT, WARRANTY, TORT (INCLUDING BUT NOT LIMITED TO NEGLIGENCE), BY OPERATION OF LAW, OR OTHERWISE. NOTHING HEREIN, HOWEVER, IS INTENDED TO DISCLAIM KKDC’S LIABILITY FOR PERSONAL INJURY OR DEATH CAUSED BY DEFECTIVE GOODS TO THE EXTENT SUCH LIABILITY IS MANDATED BY APPLICABLE LAW. 17.3 The customer’s sole remedy for any defective goods will be the repair or replacement of the defective goods. 18. Governing Law 18.1 Any Supply by KKDC to the customer, and the construction and interpretation of these conditions, shall be governed by the laws of New South Wales including the United Nations Convention on the International Sale of Goods of 1980 (and any amendments or successors thereto) and any dispute not resolved by the parties shall be subject to the exclusive jurisdiction of the Courts of New South Wales. 19. Dispute Resolution 19.1 If a dispute arises out of or relates to these conditions, or the breach, termination, validity or subject matter thereof, or as to any claim in tort, in equity or pursuant to any domestic or international statute or law, the parties to the contract and to the dispute expressly agree to endeavour in good faith to settle the dispute by mediation administered by the Australian Commercial Disputes Centre (ACDC) before having recourse to arbitration. 19.1.1 A party claiming that a dispute has arisen, must give written notice to the other party to the dispute specifying the nature of the dispute. 19.1.2 On receipt of the notice specified in clause 19.1.1, the parties to the dispute must within 7 days of receipt of the notice seek to resolve the dispute.
19.1.3 If the dispute is not resolved within 7 days or within such further period as the parties agree then the dispute is to be referred to ACDC. 19.1.4 The mediation is to be conducted in accordance with ACDC Mediation Guidelines which set out the procedures to be adopted, the process of selection of the mediator and the costs involved and which terms are deemed incorporated. 19.2 In the event that the dispute has not settled within 28 days or such other period as agreed to in writing between the parties after the appointment of the mediator, the dispute is to be submitted to arbitration (administered by ACDC) and conducted in accordance with ACDC’s Arbitration Guidelines available at https://www.acdcltd. com.au. The arbitrator is not to be the same person as the mediator. 19.2.1 Any such arbitration is to be administered by ACDC. 19.2.2 The appointing authority is to be ACDC. 19.2.3 The number of arbitrators is to be one. 19.2.4 The place of arbitration is to be New South Wales, Australia. 19.2.5 The language to be used in the arbitral proceedings is to be English. 20. General 20.1 Any notice required or permitted to be given by either party to the other under these conditions shall be in writing addressed to that other party at its registered office or principal place of business or such other address as may at the relevant time have been notified pursuant to this provision to the party given the notice. 20.2 No waiver by KKDC of any breach of these conditions by the customer shall be considered as a waiver of any subsequent breach of the same or any other provision nor shall any such waiver prejudice the right of KKDC to take any action in the future to enforce any provisions of a contract. 20.3 If any provision of these conditions is held by any competent authority to be illegal, invalid or unenforceable in whole or in part the validity of the other provisions of these conditions and the remainder of the provision in question shall not be affected and, in lieu of such illegal, invalid or unenforceable provision, there will be added, as part of these conditions, one or more provisions as similar in terms as may be legal, valid and enforceable under applicable law. 20.4 All provisions of these conditions which by their nature should apply beyond the term of a contract will remain in force after acceptance and complete performance of a contract, including but not limited to, the Payment, Confidentiality, Limitation of Liability and Dispute Resolution clauses. 20.5 The customer will not assign any rights or obligations under these conditions without the prior written consent of KKDC. KKDC may assign any rights or obligations under these conditions without the prior written consent of the customer. 20.6 For the avoidance of doubt nothing in these conditions shall confer on any third party any benefit or the right to enforce any term of these conditions.
General Information 263
KKDC would like to thank the following lighting design companies for use of project pictures.* Mulberry Company (Sales) Ltd www.mulberry.com J. Choo Limited www.jimmychoo.com iLAB independent Specialist Architectural Lighting Consultants www.ilab.ac Lighting Design International www.lightingdesigninternational.com PointOfView www.pov.com.au DPA Lighting Consultants www.dpalighting.com Wainbridge Limited www.wainbridge.com Serra Eclairage www.serraeclairage.com * Whilst every effort has been made to accurately depict KKDC product in context with use of genuine project photography, some images may be for illustrative purposes only.
KKDC is constantly developing and improving its products therefore, KKDC reserves the right to discontinue any products from its ranges at any time whatsoever and without prior notice. KKDC also reserves the right to make technical and photometric modifications in addition to the change of any parts, details or finishes deemed suitable for improvement purposes and meeting statutory requirements. For installation purposes, refer exclusively to the conditions described in the instruction sheet supplied with the product package and/or download from the website www.kkdc.co.uk.
Editor: KKDC Creative Direction: Tim Young Graphic Design: Akino Tsuga Print & Image Editing: Jan Tickell Technical Contributors: Tom Hall, William Fairhall v 2.0 September 2013
www.kkdc.co.uk
264
General Information
速