ONSITE OFFERS APRIL - JUNE 2015
DRYWALL SCREWGUN 18V XR Li-Ion Brushless Drywall Screwdriver offers extended runtime, delivering up to 6000 screws per charge. Quick release collated screw magazine accepts most collated screws for even greater productivity and helping you install boards quicker. Powerful 4400rpm BRUSHLESS motor drives screws efficiently and effectively offering maximum runtime in a compact tool.
DCH274P2T-XE* DCH274N-XE*
869
$ RRP
Battery Capacity
EX GST $790
Power Output
INTRODUCING THE LATEST, HARDEST HITTING, LOWEST VIBRATING 18V BRUSHLESS SDS-PLUS CORDLESS ROTARY HAMMER DRILL. BUILT FOR THE TOUGHEST JOB SITES The essential tool for drilling anchors and fixing holes into concrete, brick and masonry from 4mm to 24mm. 5.0Ah 18 Volt Lithium Ion battery for maximum runtime. Drill over 90 holes on a single charge (10mm holes). Best in class vibration, 6.6m/s² lets you work safer and more comfortably for longer. Bright white LED improves visibility for your application.
5AH
Bare Unit
ü
ü
3 Mode
400W
400W
No Speed (RPM)
0-1100
0-1100
Blows per minute (BPM)
0-4600
0-4600
Impact Energy (EPTA 05/2009)
2.1J
2.1J
Vibration (m/s²) (Tri-Axial)
6.6
6.6
$869
$549
RRP (inc. GST)
Extraction Unit sold seperately. RRP (Inc. GST) $209
• Compact design and low weight, with no need for additional hoses gives near perfect balance.
• Powerful Brushless motor for heavy duty tasks • Longer runtime and longer tool life
2
DCF620P2K-XE
*Includes SDS+ Chuck and 13mm Keyless Chuck
ALSO AVAILABLE INTEGRATED DUST EXTRACTION UNIT D25303DH-XJ
XR BRUSHLESS MOTOR
18V XR SCREWGUN
• Essential for dust free drilling up to 16 mm in diameter. • HEPA filter capable of achieving 99.5% efficiency with dust particles as small as 0.3 microns.
CO SO MI O NG N *
699
$ RRP
EX GST $635.45
5.0AH Batteries for eXtreme runtime Includes both collated and single Screw locking nose cone One of the lightest and most Compact tool on the market LED Light for worksite convenience Accepts most collated screws
DCF620KN-XE Includes both collated and single Screw locking nose cone One of the lightest and most Compact tool on the market LED Light for worksite convenience Accepts most collated screws Includes: DCF6201-XJ collated screw magazine DT7205-QZ PR2 collated screw bit Single Screw Nose cone DT7520-QZ Magnetic bit extender with 25mm PR2 screw bit Batteries & charger sold separately
Voltage
18V
Max Torque
5-30Nm
Power Output
435W
No Load Speed
0 - 4400rpm
Tool Holder Screws / Charge
(Hex) 6.35mm 6,000 Timber stud / 3,500 Metal stud
Weight
Includes: 2 x 5.0Ah Slide Pack Batteries Multi-voltage XR charger DCF6201-XJ collated screw magazine DT7205-QZ PR2 collated screw bit Single Screw Nose cone DT7520-QZ Magnetic bit extender 25mm PR2 screw driver bit
18V XR SCREWGUN
DCF620P2K-XE/DCF620KN-XE
1.9kg
Head Length
335mm
Length
380mm
Height
233mm
Available as a two battery kit and as a bare unit
369
$ RRP
EX GST $335.45
PR2 SCREWDRIVER BIT Exclusively compatible with the DEWALT® XR Drywall Screwdriver, the new PR2 screwdriver bit offers ideal geometry for drywall screws to further improve productivity. Supplied with the DCF620P2K-XE/DCF620KN-XE. Driver bits also available separately as accessories: DT7206-QZ (PK5) DT7207-QZ (PK20)
3
18V XR
HIGH TORQUE IMPACT WRENCH
BAND SAW
*
• Latest generation 18V BRUSHLESS XR Li-Ion High Torque Wrench featuring XR 5Ah Li-Ion battery technology • Powerful fan cooled motor delivers up to 950Nm of torque and 2400 impacts per minute for heavy duty fastening applications • 3 speed and torque settings gives you the control to best suit your needs
DEWALT® 18V XR CUTTING POWER • Smooth cuts leaves surfaces burr-free • Creates little or no sparks • Well balanced and easy to handle • LED Light for worksite convenience • 63mm cut capacity cuts up to DN 50 or 2” SCH 40 pipe
COMING SOON
DCF899P2-XE / DCF899N-XE
329
$ RRP
Battery
XR Li-Ion
Voltage
18V
Max Torque
DCS371N-XE
950Nm
Breakaway Torque
EX GST $299.09
1625Nm
Power Output
*Only available as a bare unit in ANZ
No Load Speed
699
$ RRP
610 Watt 0 - 400 / 1200 /1900 rpm
Impacts per Minute
DCF899P2-XE
Weight
EX GST $635.45
0 - 2400 ipm 3.3 kg
THE NEW GENERATION OF PORTABLE JOBSITE LIGHTING • High power LED spot and area lights • Enough runtime for a full working day when used with an XR 5.0AH battery pack • Ideal for tradespeople who work in a confined or poorly lit spaces for extended periods • Durable rubberised handles and heavy duty build quality
BLUETOOTH SPEAKER With all the durability you’d expect from a DEWALT® product, this compact speaker also boasts the ability to stream audio from your devices via Bluetooth from a range of up to 30.5m. Delivering quality sound and powered by your existing batteries, there’s no better site companion. Compatible with XR Li-Ion Battery packs.
119
$ RRP
EX GST $108.18
DCR006-XE
BLUETOOTH ADAPTOR DCL060-XE* Voltage Light Output Weight Runtime RRP (inc. GST)
DCL043-XE* 18V 1500 Lumens 1.5kg < 4 hrs $209
*Supplied as bare unit.
4
Voltage Light Output Weight Runtime RRP (inc. GST)
DCL050-XE* 18V 120-1000 Lumens 0.7kg < 10 hrs $169
*Supplied as bare unit.
Voltage Light Output Weight Runtime RRP (inc. GST)
DCL040-XE* 18V 250-500 Lumens 1.1kg < 10 hrs $119
*Supplied as bare unit.
Voltage Light Output Weight Runtime RRP (inc. GST)
18V 110 Lumens 0.6kg < 10 hrs $59 *Supplied as bare unit.
DCR002-XJ
$ RRP
59
The adapter can be connected to any audio device with a 3.5mm auxiliary jack allowing Bluetooth connectivity. With a single top-mounted button for added convenience, the unit can be paired quickly and easily to any portable audio player, tablet or smartphone with Bluetooth capability. The adaptor can stream sound up to a 30.5m distance.
EX GST $53.64
5
XR 10.8V LI-ION RANGE
0.8V TWIN PACK NEW 1 HIGH CAPACITY 2.0AH BATTERIES
10.8V LI-ION INSPECTION CAMERA
Introducing the latest development in the 10.8V platform. Provides extended runtime from an ultra compact package.
2.0
439
$
DCT410D1-XE
RRP
EX GST $399.09
Removable wireless screen for ease of viewing when in tight areas Photo and video capturing on Micro SD card to help with documentation Hook and magnet accessories included to aid in retrieval 3x zoom capability for better visibility 3.5” screen for increased visibility Standard Equipment 1 x 2Ah XR Li-Ion battery pack, Multi Voltage Charger, Hook attachment, Magnet attachment, Camera cable, Heavy duty kitbox
10.8V LI-ION IMAGING THERMOMETER
1449
$
DCT416D1-XE
RRP
EX GST $1317.27
Patented imaging thermometer measures & displays temperature patterns Non-contact temperature measurement over a range of -10°C to 250°C Visual and thermal images can be blended to easily locate and identify faults Adjustable emissivity improves accuracy across a wide range of materials 56mm Colour LCD screen with easy to use interface Photo capture and Micro SD Data recording
DCK211D2T-XE
Standard Equipment 1 x 2Ah XR Li-Ion battery pack, Multi Voltage Charger, Micro SD card, Heavy duty kitbox
Standard Equipment DCD710 Drill Driver DCF815 Impact Driver 2 x 2.0Ah Slide Pack batteries Multi Voltage Charger TSTAK V Kit Box
INFRARED THERMOMETER DCT414D1-XE
XR Li-Ion 10.8V 2.0AH
279
EX GST $253.63
10.8V LI-ION DRILL DRIVER DCD710D2-XE Compact body for confined spaces 15 Position adjustable torque control Ergonomic handle and rubber overmold All metal gearing Max. Drilling (wood) 20mm Parabolic switch - greater application control LED light for improved visibility Standard Equipment 2 x 2Ah XR Li-Ion battery packs Multi Voltage Charger Heavy Duty Kit Box
6
EX GST $208.18
209
$ RRP
EX GST $190
10.8V LI-ION IMPACT DRIVER DCF815D2-XE Compact body for confined spaces 3 LED ‘Halo’ ring = maximum illumination Ergonomic handle and rubber overmold All metal gearing Delivers 107Nm of torque Aluminium front housing provides greater heat dispersion increasing motor life Standard Equipment 2 x 2Ah XR Li-Ion battery packs Multi Voltage Charger Heavy Duty Kitbox
209
$ RRP
EX GST $190
3/8 IMPACT WRENCH DCF813D2-XE
RECIPROCATING SAW DCS310N-XE
119
$ RRP
EX GST $108.18
Adjustable three position pivoting Ergonomic handle and rubber overmould Lever action keyless blade clamp for quick and easy blade change LED light for improved visibility Standard Equipment Supplied as a bare unit Batteries & charger sold separately
Standard Equipment 1 x 2Ah XR Li-Ion battery pack Multi Voltage Charger Heavy duty kitbox
$ RRP
RRP
Non-contact temperature measurements (-29°C to 500°C) LED hot (red) & cold (blue) indicator for visual and/or audio alarm Micro SD card for recording max, min, and average temperatures Adjustable emissivity for improved accuracy
DCK211D2T-XE Battery chemistry Voltage Battery Capacity
229
$
209
$ RRP
EX GST $190
SCREWDRIVER DCF610D2-XE
Compact body for confined spaces 3 LED ‘Halo’ ring = maximum illumination Ergonomic handle and rubber overmold All metal gearing Delivers 130Nm of torque Aluminium front housing provides greater heat dispersion increasing motor life
Powerful 10.8V Screwdriver 15 Position adjustable torque control 3 LED ‘Halo’ ring = maximum illumination Parabolic switch profile Ergonomic handle and rubber overmold All metal gearing 6.35mm ‘drop in’ keyless hex driver
Standard Equipment 2 x 2Ah XR Li-Ion battery packs Multi Voltage Charger Heavy Duty Kit Box
Standard Equipment 2 x 2Ah XR Li-Ion battery packs Multi Voltage Charger Heavy Duty Kit Box
209
$ RRP
EX GST $190
7
NEW 36V RANGE CORDLESS HAMMER
4.0
Introducing the latest development In 36V Cordless Hammer Drills, with High Capacity 4.0AH battery packs and a new style frameless motor for enhanced performance and even greater runtime.
Quick release SDS-Plus toolholder and keyless chuck
BEST IN CLASS
36V LI-ION XENON FLEX NECK INSPECTION LIGHT
99
$
DC509-XJ
RRP
EX GST $90
Lockable head clip offers versatility and convenience of a lantern Flashlight with flexible neck for multi-directional hands-free lighting Compact, lightweight design with impact resistant housing 8 hours continuous run time with the 36V Li-Ion battery pack Battery and charger sold separately Wide angle beam with metal reflector and Xenon bulb for greater brightness Can be used free-standing, wrapped around a pipe or hanging from a fixture Includes: 36V LI-ION Heavy Duty Flashlight - Bare Unit Batteries & charger sold separately
Vibration, 7.1m/s²
8 HOURS RUNTIME Ideal for drilling into concrete, brick and masonry from 4mm to 26mm
36V LI-ION RECIPROCATING SAW DC305KN-XJ
299
$ RRP
EX GST $271.82
Powerful DEWALT fan cooled motor with replaceable brushes and variable speed delivers fast cutting action up to 3000 strokes per minute and 29 mm stroke length Variable speed trigger, lock-off switch and electronic motor brake for quick controlled cuts and enhanced work safety 4-position keyless blade clamp allows quick blade change, flush cutting, and versatility 3-position adjustable shoe for adjusting depth of cut and extends blade life
Backwards compatible with all existing DEWALT® 36V tools
DCH364M2-XE Battery Capacity Power Output No Load Speed Impact energy (EPTA 05/2009) Blows per Minute Max. Drilling Capacity [Wood] Max. Drilling Capacity [Metal] Max. Drilling Capacity [Concrete] Weight Hand/Arm Vibration - Drilling Quick Change Chuck Dust Extraction
4.0Ah 600W 0-1100RPM 2.3J 0-4500BPM 30mm 13mm 26mm 3.9Kg 7.1m/s2 ü û
D25302DH-XJ Integrated dust extraction system available separately.
HIGH CAPACITY 36V ROTARY HAMMER 4.0
EX GST $999.09
State of charge indicator (Fuel Gauge)
8
36V LI-ION CIRCULAR SAW
399
$ RRP
EX GST $362.73
Powerful DEWALT fan cooled motor with 4000RPM 184 mm, 24 tooth carbide tipped blade allows for efficient run-time and fast, smooth cut finish Maximum 62 mm depth of cut Extremely durable design offering a cast magnesium shoe & full metal guarding 0-50° bevel capacity with lever-action detents at 22.5° and 45° allows for quick set up Keyless bevel angle and depth of cut adjustment Handle set at 15 degrees with diamond patterned grip area Spindle lock for quick and easy blade change Lock off switch and electronic motor brake All-metal keyless blade change system
1099
*DCB361-XE 2.0AH Ultra-light battery pack also available.
3000 SPM
DC300KN-XJ
$ RRP
Includes: Wood cutting blade Heavy duty carrying case 36V LI-ION Heavy Duty Reciprocating Saw - Bare Unit Batteries & charger sold separately
Incredible runtime – 109% more than a standard 2.0Ah 36V pack
Includes: 36V LI-ION Heavy Duty Circular Saw - Bare Unit 184 mm 24 tooth carbide blade Rip fence Batteries & charger sold separately
4000 RPM
9
PLUNGE SAWS
SAFETY Anti kick back function.
THE NEW DEWALT PLUNGE SAW RANGE. ALWAYS ON THE RIGHT TRACK.
DURABILITY
A NEW concept in DEWALT sawing - The plunge saw offers new levels of speed of set up, accuracy of cut and quality of finish. Central to this cutting system is the DEWALT track, which combines with other tools in the DEWALT range, with a full range of attachments and with dust management system to provide a complete job site solution. The DEWALT DWS520KT-XE plunge saw comes as standard with a 1.5m rail, AirLock adaptor and a TSTAK™ kit box.
Full wave tachometric variable speed for motor protection even when used with hard woods.
POWER High torque motor delivers powerful cuts in heavy duty applications.
SYSTEM DEWALT guide rails can also be used with most DEWALT routers and circular saws, providing a complete system for the end user.
EASE OF USE Parallel plunge allows the user to maintain a smooth and constant hand position while cutting.
DUST MANAGEMENT Enclosed guard gives 90% dust extraction capability.
VERSATILITY Lockable spindle lock for quick and easy blade changing.
DUST MANAGEMENT Fully compatible with the DEWALT dust management system.
ACCURACY
EASE OF USE
Superior tool design and excellent rail system with fixed rail adjusters to eliminate deflection during a cut.
Spring loaded riving knife which automatically retracts during plunge cuts.
RAIL STABILITY
FINISH
STANDARD EQUIPMENT
The DEWALT guide rail system offers anti-splinter lips on both sides of the guide rails.
DWS520KT-XE
The underside of the rail features foam cushioning strips which keep the rail secure on the workpiece during cuts.
BEVEL 47" bevel giving extra capacity in 2nd fix applications.
DWS520KTK-XE BONUS PACK
CAPACITY
VERSATILITY
165mm blade gives 55mm depth of cut on the rail (59mm off the rail).
DE6292-XJ jointing bar allows two rails to be joined together where extra capacity is required such as when cutting sheet material.
DWS5021-XJ
DWS5025-XJ
ACCURACY 48 tooth blade - very little breakout in laminates.
DWS5026-XJ
EASE OF USE
SPEED. ACCURACY. SYSTEM. SPECIFICATIONS Power Input No Load Speed Blade Diameter Bevel Capacity Max. Depth Cut at 45° Max. Depth Cut at 45° on Guide Rails Max. Depth Cut Max. Depth Cut on Guide Rails Weight RRP (inc. GST)
10
DWS520KT-XE 1400W 1750-4000rpm 165mm 47° 44° 40° 59° 55° 5.1kg $799
DWS520KTK-XE 1400W 1750-4000rpm 165mm 47° 44° 40° 59° 55° 5.1kg $1099
PRODUCT SPECIFICATION
DWV9210-XJ
Low friction strip allows the saw to guide easily along the rail.
DWS520KT-XE
DE6292-XJ
Bonus Plunge Saw accessories come as standard when you purchase the DWS520KTK-XE
ATTACHMENTS AVAILABLE
DWS5021-XJ
DWS5022-XJ
DWS5023-XJ
DWS5025-XJ
DE6292-XJ
DWS5026-XJ
DWS5029-XJ
DWS5030-XJ
DWS5031-XJ
DWS5032-XJ
CODE DWS5021-XJ DWS5022-XJ DWS5023-XJ DWS5025-XJ DWS5026-XJ DWS5029-XJ DWS5030-XJ DWS5031-XJ DWS5032-XJ DE6292-XJ
DESCRIPTION 1m guide rail 1.5m guide rail 2.6m guide rail Bag - for use with 1m and 1.5m DEWALT guide rails Clamps for use with DEWALT guide rails (Pair) Replacement edge strip Replacement Low Friction Strip (Top of Guide Rail) Router attachment for guide rail Replacement high friction strip (Bottom of Guide Rail) Jointing Bar for DEWALT Guide Rails
RRP $149 $209 $289 $89 $119 $49 $49 $119 $49 $49
11
SAW NEW TABLE ACCURACY, DURABILITY & VERSATILITY NARROW RIPPING Improved design allows for thin ripping. Usually the most difficult cutting process
STAND SYSTEMS 1.7M MITRE SAW STAND
DWE7491-XE Power Input 2000W Blade Speed 3800RPM Blade Diameter 254mm Blade Bore 16mm Bevel Capacity -3 to 48° Max. Ripping Capacity [right] 825mm Max. Ripping Capacity [left] 558mm Max. Depth of Cut at 90º 79mm Max. Depth of Cut at 45º 57mm Table Size 670x630mm Weight 26.6kg
Compatible with all DEWALT mitre saws. Full range of attachments available for all application requirements. Extends to 3.8 metres.
CODE
ATTACHMENT
DW7232
Material Support Stop (each)
$59
DW7231
Saw Support Brackets (1 pair)
$69
DE7027-XJ
Roller Supports (each)
$99
DE7028-XJ
Extension Arm Support (each)
$99
DE7029-XJ
Increased Width Material Support (each)
$99
DW7232
DW7231
DE7027-XJ
DE7029-XJ
RRP
DWX723-XE Load Capacity Beam Length Weight
1099
$
227Kg 1.7-3.9m 16Kg
299
$ RRP
EX GST $271.82
RRP
DE7028-XJ
EX GST $999.09
NO LOAD SWITCH The switch is automatically reset if power is lost
POWER Newly Designed Transmission delivers up to 2000W (230V)
STAND SOLD SEPERATELY Optional DWE74911-XJ leg stand shown.
TABLE SAW STANDS ROLLING & SCISSOR
MULTI-FUNCTION FENCE More versatile design allows wide ripping with material support and narrow ripping
SAW NEW TABLE LIGHTWEIGHT, HEAVY DUTY 254MM Compact Size with Large Cutting Capacities
Fence Design Allows Rip Capacity to 610mm
Rack & Pinion for BEST IN CLASS Accuracy and Ease of Use
DE7400-XJ
DWE74911-XJ
DWE74912-XJ
DE7450-XJ
Universal Fitment
Unique to DWE7491-XE Table Saw
Unique to DWE7491-XE Table Saw
Unique to DW745-XE Table Saw
$ RRP
319
EX GST $290
DW745-XE
On Board Storage Durable Roll Cage Positive On/Off Switch
12
Power Input 1850W Blade Speed 3800RPM Blade Diameter 254mm Blade Bore 16mm Bevel Capacity -3 to 48° Max. Ripping Capacity [right] 610mm Max. Ripping Capacity [left] 315mm Max. Depth of Cut at 90º 79mm Max. Depth of Cut at 45º 57mm Table Size 630x570mm Weight 22kg
799
$ Easy to Use controls for Bevel, Mitre, Rip Fence Adjustments
RRP
EX GST $726.36
279
$ RRP
EX GST $253.64
119
$ RRP
EX GST $108.18
119
$ RRP
EX GST $108.18
LAMINATE TRIMMER DWE6005-XE Power Input 590W Power Output 340W No Load Speed 1600-34000RPM Plunge Stroke/Movement 22mm Collet Size 1/4" / 6.35mm Max. Cutter Diameter 29mm Weight 1.5Kg Length 110mm Height 205mm Hand/Arm Vibration 2.5m/s²
Engineered for precise woodworking applications: small radius chamfers, shaping edges
Unrivalled Comfort, Accuracy, Performance
249
$ RRP
EX GST $226.36
13
CO SO MI O NG N *
THE COMPLETE SOLUTION FROM START TO FINISH SDS PLUS HAMMERS
1200W GRINDER Extremely lightweight with an ergonomic body, the much improved, high performing range of compact angle grinders from DEWALT® provide the user with optimal tool balance. In addition to this, the cooler operating temperature ensures these tools can be used for longer before overheating, preserving the life of the motor.
• Lightweight – ranging from 2.5 to 3.1kg, including side handle, this improved range allows the user to benefit from reduced arm strain • Convenient – the reversible brush ring provides equal power in forward and reverse, making it easy to remove trapped accessories • Durable – the tough outer shell and recessed mode selector ensure improved product longevity
SPECIFICATIONS Power Input Drilling modes Quick Change Chuck
SPECIFICATIONS Power
DWE4213-XE
DWE4214-XE
DWE4215-XE
1200W
1200W
1200W
11000rpm
11000rpm
11000rpm
Switch Type
Paddle
Slide
Slide
Max. Disc Diameter
125mm
115mm
125mm
Spindle Thread
M14
M14
M14
Weight
No Load Speed
Kit Box
2.2kg
2.2kg
2.2kg
Includes Kit box
No
No
No
Price (Exc. GST)
$229 ($208.18)
$199 ($180.91)
$209 ($190)
Impact energy (EPTA 05/2009) Max. Drilling Capacity [Concrete] Vibration Price (Exc. GST)
D25133K-XE
D25144K-XE
D25263K-XE
800W
900W
900W
3
3
3
No
Yes
No
Yes
Yes
No
2.6J
3J
3J
26mm
28mm
28mm
15.4m/s²
14.9m/s²
9.8m/s²
$229 ($208.18)
$319 ($290)
$319 ($290)
1300W PERCUSSION DRILL
RRP
DWE305PK-XE
EX GST $317.27
Power
1100W
No Load Stroke Rate
0-2800spm
Stroke Length
RECIP SAW
DWE305PK-XE
With its industrial design, improved gearbox, and powerful 1100W motor, this tool is designed to withstand the toughest of environments. It also benefits from a four position blade clamp, delivering versatility and flush cutting, no matter how demanding the task. Supplied with Kit Box.
14
349
$
29mm
Max. Cutting Capacity [Wood]
280mm
Max. Cutting Capacity [Steel Sections & Pipes]
100mm
Max. Cutting Capacity [PVC]
130mm
Weight
3.5kg
Length
435mm
Height
178mm
249
$ RRP
DWD530KS-XE
750W PERCUSSION DRILL
129
$ RRP
EX GST $117.27
DWD025KS-XE
EX GST $226.36
15
XR 18V BARE UNITS
3-SPEED XRP NEW 18V HEAVY DUTY HAMMER DRILL Use of E-Clutch technology provides the most compact Hammer Drill Driver ever from DEWALT
18V XR SDS HAMMER DRILL DCH254N-XE
E-Clutch Technology Precise finish first time, every time
34,000BPM for fast masonry drilling All metal chuck Increased performance & durability DCD985 237mm
80Nm Torque Brushless motor efficiency + High capacity battery = Extreme Runtime
DCD995 213mm
Torque Length Weight Power Output BPM RPM Chuck size
80 Nm 213 mm 2.13 kg 650 W 0-7650/22100/34000 0-450/1300/2000 1.5 - 13 mm
XR Intelligent switch module Maximum tool & battery protection LED work light On the foot reduces chuck shadow
XR Li-Ion 5.0Ah batteries Extended runtime & optimised power
639
$ RRP
EX GST $580.91
ELECTRONIC CLUTCH The Intelligent trigger just got smarter, not only does it protect the tool and battery but it also now controls the clutch. The Electronic Clutch is smart enough to know what speed the drill is in, what torque setting is selected and even how hard you are pulling the trigger. The Electronic Clutch with 11 torque settings offers more precise control from fewer settings which means you get the job done better and faster.
16
RRP
EX GST $390
3 Mode Dedicated Cordless Hammer Drill Ideal for drilling anchors & fixing holes into concrete, brick & masonry Rotation stop for light chiseling Rotary only for metal and wood drilling Anti vibration control reduces user fatigue and maximises operating usage Intelligent trigger protects battery & tool Batteries & charger sold separately Quick Change Chuck Comes with 3 jaw chuck & SDS+ Chuck for increased versatility.
18V XR 125MM GRINDER DCG412N-XE
DCD995P2-XE
ALL METAL GEARBOX provides smooth power transfer and increased durability
429
$
RRP
199
RRP
EX GST $208.18
18V XR IMPACT WRENCH
18V XR IMPACT DRIVER
18V XR BAND SAW
DCF880N-XE
DCF885N-XE
DCS371N-XE
199
$ RRP
EX GST $180.91
Powerful 155 Nm Max Torque 6.35mm ‘drop in’ keyless hex driver All metal gearing for durability Aluminium front housing disperses heat and increases motor life 3 LED ‘Halo’ ring provides maximum illumination Intelligent trigger protects battery and tool Batteries & charger sold separately
209
*Batteries & charger sold separately
229
$
Powerful 460W motor for fast cutting even in the toughest of applications 3700 RPM for fast high torque cutting Extremely durable tool design, cast aluminum base Keyless bevel angle and depth of cut Spindle lock for quick and easy blade change Lock off switch & electronic motor brake 165mm Blade, Hex key, dust port Intelligent trigger protects battery & tool Batteries & charger sold separately
139
$ RRP
EX GST $126.36
$ RRP
EX GST $190
HIGH CAPACITY BATTERY packs for extended runtime
EX GST $262.73
DCS391N-XE
EX GST $180.91
RRP
POWERFUL BRUSHLESS MOTOR for improved efficiency and heavy duty tasks
RRP
18V XR CIRCULAR SAW
$
Powerful 405W fan cooled motor 7000 RPM for fast cutting and grinding Steel cut spiral gears for highest durability Low profile gear case for greater access Two position side handle Quick change wheel release for productivity. M14 Spindle 125mm Max Disc Diameter Intelligent trigger protects battery & tool Batteries & charger sold separately
Powerful 203 Nm Max Torque 1/2” (12.7mm) square socket drive All metal gearing for durability Aluminium front housing disperses heat and increases motor life 3 LED ‘Halo’ ring provides maximum illumination Intelligent trigger protects battery and tool Batteries & charger sold separately
289
$
DCS331N-XE Powerful 400W fan cooled motor Variable speed trigger & lock off switch Tool free adjustable shoe with antiscratch cover Patented keyless blade change Anti vibration counter balance mechanism 3 position pendulum action Dust blower keeps cut line clear of dust Intelligent trigger protects battery & tool Batteries & charger sold separately
$ BRIGHT WHITE LED on the foot to reduce shadow
18V XR JIGSAW
Ideally suited for cutting metal, including threaded rod, unistrut and steel pipework 63mm cut capacity cuts up to DN 50 or 2” SCH 40 pipe Smooth cuts leaves surfaces burr-free Creates little or no sparks when cutting metal Well balanced and easy to handle 14/18 TPI variable pitch bi-metal blade Hang hook Battery and charger sold separately
319
RRP
EX GST $299.09
289
$ RRP
EX GST $290
*Batteries & charger sold separately
329
$
EX GST $262.73
*Batteries & charger sold separately
18V XR RECIPROCATING SAW
18V XR HIGH TORQUE WRENCH
18V XR METAL CIRC SAW
DCS380N-XE
DCF889N-XE
DCS373N-XE
Powerful 560W motor for fast cuts 2950 Strokes per minute, 28.6mm stroke length Variable speed trigger & lock-off switch lever Pivoting adjustable shoe 4 Position blade clamp Intelligent trigger protects battery & tool
418Nm of torque and 2300 impacts per min Aluminium front housing disperses heat and increases motor life 1/2" (12.7mm) square socket drive Bright white LED light Intelligent trigger protects battery and tool
Powerful 460W motor, 3700rpm for fast cutting Extremely durable tool design with steel shoe Spindle lock for easy blade change Transparent front guard and LED light Burr-free cuts at 43mm cutting depth Intelligent trigger protects battery and tool
17
AVAILABLE NEW ALSO IN THE XR 5.0AH RANGE
FRAMING NAILER
NEW
2-SPEED WITH 5.0AH TECHNOLOGY
18V XR 6-TOOL COMBO KIT 5.0AH
WHY 2 SPEEDS?
1529
$
DCK653P3-XE
EX GST $1390
+
SMALLER NAILS REQUIRE LESS FORCE TO DRIVE THEM HOME.
RRP
+
USING A LOWER SPEED SETTING PROVIDES:
50 40
50°C
30 20 10 0
+
+
- MORE RUNTIME 350mm - FASTER APPLICATION SPEED - LONGER TOOL LIFE 50-90mm
-15°C
10 20
2.8mm - 3.3mm
50°C
50 40 30 20 10
0
-15°C
350mm
10 20
30° - 34°
2.8mm - 3.3mm 50 40
50°C
50 40 30
30
20
20
10
10
0
0
50-90mm 350mm
50-90mm
-15°C
30° --34° 2.8mm 3.3mm 350mm
10 20
2.8mm - 3.3mm
-15°C
10 20
NO GAS
50°C
X2 Sec
X2
50-90mm Sec 30° - 34°
30° - 34°
DCN692P2-XE X2 Sec
Battery Capacity Nail diameter Magazine angle Magazine loading Nail length Magazine capacity
Nail jams are simple to clear
X2 Sec
5.0Ah 2.8-3.3mm 30-34° Rear-load 50-90mm Up to 55 nails
999
Kit Includes DCD995 Brushless XRP Hammer Drill, DCF895 Brushless 3-Speed Impact Driver, DCS380 Reciprocating Saw, DCS391 Circular Saw, DCG412 125mm Grinder, DCL040 LED work light, 3 x 5.0AH Slide Pack Batteries, Multi-voltage charger, DS300 & DS400 Tough System Kit Box Tough System Specification IP65 Dust tight & water jet resistant, Internal accessory storage, Side clips for stacking, Metal hinges and latches, Bi-material handles
18V XR 4-TOOL COMBO KIT 5.0AH
Profiled nose-piece provides stable platform
Fault indicator lights communicate instantly why your nailer has failed to fire – either a low battery or a nail jam
COMPACT SIZE Fits easily between 400mm centre studs
-15°c
18
EX GST $971.82
BLUETOOTH SPEAKER VIA REDEMPTION WHEN YOU PURCHASE A DCK450P2-XE. SPEAKER VALUED AT RRP $119. GO TO WWW.GUARANTEEDTOUGH.COM.AU
INCLUDES
+
18V XRP TWIN KIT 5.0AH
$
DCK255P2-XE
RRP
749
EX GST $680.91
Kit Includes DCD995 Brushless XRP 3 Speed Hammer Drill driver, DCF886 Brushless Impact Driver, 2 x 5.0AH Slide Pack Batteries, Multi-voltage charger, DS150 Tough System Kit Box DS150 Kit Box Included IP65 Dust tight & water jet resistant, Internal accessory storage, Side clips for stacking, Metal hinges and latches, Bi-material handles
Unique Bump Mode function allows user to fire 2 nails per second
NO GAS! Completely battery powered operation allows for low maintenance, and more consistent operation especially in low temperatures
RRP
RRP
Kit Includes DCD795 Brushless Hammer Drill, DCF886 Brushless Impact Driver, DCS380 Reciprocating Saw, DCS391 Circular Saw, 2 x 5.0AH Slide Pack Batteries, Multi-voltage charger, DS150 & DS400 Tough System Kit Box Tough System Specification IP65 Dust tight & water jet resistant, Internal accessory storage, Side clips for stacking, Metal hinges and latches, Bi-material handles
REDEMPTION
EX GST $908.18
1069
$
DCK450P2-XE
$ RRP
INCLUDES
• Less noise • Less recoil/vibration • No storage of flammable gases • No breathing in toxic chemicals
REDEMPTION
BLUETOOTH SPEAKER VIA REDEMPTION WHEN YOU PURCHASE A DCK255P2-XE. SPEAKER VALUED AT RRP $119. GO TO WWW.GUARANTEEDTOUGH.COM.AU
+
5.0AH BATTERIES ARE BACKWARDS COMPATIBLE WITH ALL XR TOOLS OF THE SAME VOLTAGE
19
SAWS
18V XR 4.0AH COMBO KITS +
1349
829
$
$
RRP
RRP
EX GST $753.64
EX GST $1226.36
4.0
4.0
BONUS: XR COMPACT FM AM RADIO VALUED AT $159 DCR019-XE
18V XR LI-ION 6-TOOL COMBO KIT
18V XR LI-ION 5-TOOL COMBO KIT
DCK693M3-XE
DCK593M2-XE
Kit Includes: DCD985N-XE 18V XR XRP 3-Speed Hammer Drill, DCF885N-XE 18V XR Impact Driver, DCS380N-XE 18V XR Reciprocating Saw, DCS391N-XE 18V XR Circular Saw, DCG412N-XE 18V XR 125mm Angle Grinder, DCL040-XE 18V XR LED Work Light, DCB182-XE 18V XR 4.0Ah Batteries (x3), DCB105-XE XR Multi-Voltage Charger, DS300 Tough System Modular Storage Unit, DS400 Tough System Modular Storage Unit
Kit Includes DCD985 XRP 3 Speed Hammer Drill driver, DCF885 Impact Driver, DCG412 125mm Grinder, DCL040 LED Light, DCS387 Reciprocating Saw, 2 x 4.0AH Slide Pack Batteries, Multi-voltage charger, DEWALT Job Site Bag
619
$ RRP
649
$ RRP
EX GST $562.73
EX GST $590
4.0
4.0
18V XR LI-ION 3-TOOL COMBO KIT
18V XR LI-ION 3-TOOL COMBO KIT
DCK391M2-XE
DCK393M2-XE
Kit Includes DCD985 XRP 3 Speed Hammer Drill driver, DCF885 Impact Driver, DCG412 125mm Grinder, 2 x 4.0AH Slide Pack Batteries, Multi-voltage charger, DEWALT Job Site Bag
Kit Includes DCD985 XRP 3 Speed Hammer Drill driver, DCF880 Impact Wrench, DCG412 125mm Grinder, 2 x 4.0AH Slide Pack Batteries, Multi-voltage charger, DEWALT Job Site Bag
849
$ RRP
659
$ RRP
+
EX GST $771.82
EX GST $599.09
4.0 BONUS: 18V XR LI-ION 4.0AH BATTERY VALUED AT $139 DCB182-XE
18V XR LI-ION 3-TOOL COMBO KIT
18V XR LI-ION 2-TOOL COMBO KIT
DCZ392M2-XE
DCK295M2-XE
Kit Includes DCD985 XRP 3 Speed Hammer Drill driver, DCF885 Impact Driver, DCH254N SDS+ Rotary Hammer Drill, 2 x 4.0AH Slide Pack Batteries, Multi-voltage charger, DEWALT Job Site Bag
Kit Includes: DCD985 XRP 3 Speed Hammer Drill driver, DCF880 Impact Wrench, 2 x 4.0AH Slide Pack Batteries, Multi-voltage charger, DS150 Tough System Kit Box DS150 Kit Box Included: IP65 Dust tight & water jet resistant, Internal accessory storage, Side clips for stacking, Metal hinges and latches, Bi-material handles
20
305MM XPS DOUBLE BEVEL COMPOUND MITRE SAW
RRP
EX GST $1062.73
Outstanding cutting performance Small and large construction timbers up to 303 x 110mm XPS shadow cutline system Easy to use mitre and bevel controls Maximum support in large material cuts at any angle or combination of angles Outstanding dust control and deflection away from cutting area Adjustment of the cutting depth for grooving and rebating applications Electronic speed control Includes: 60 tooth blade, Blade spanner, Dust bag, Material clamp
BONUS
MITRE SAW STAND VALUED AT $299 DWX723-XE
+
MULTI-TOOL 300W
249
$
DWE315KT-XE
RRP
EX GST $226.36
Quick accessory change, no Hex Key required Superior Ergonomics 0 22,000 opm Variable Speed Trigger, with ‘Lock On’ functionaility, for ultimate control Sanding Platen included Universal Adaptor included Powerful 300w Motor TSTAK Kitbox 37pc Accessory Set Dust Extraction Adaptor Depth Stop / Straight Cut Guide LED Light Tool Free Blade Change when Using DEWALT Accesories
216MM SLIDE MITRE SAW
RRP
EX GST $526.36
Includes: 24 tooth saw blade Blade spanner
BONUS
184MM CIRCULAR SAW 1350W
3-PORT DUST EXTRACTION KIT VALUED AT $89 DE7778-XJ
+
139
$
DWE560-XE
RRP
EX GST $126.36
Cuttaway inner guard improved cut line visibility Dust blower clears dust and debris from cut line High Power 1350W Motor 48° Bevel Capacity 65mm depth of cut 3m Cord
BONUS
579
$
DW777-XE Powerful 1800W motor for powerful cutting in all materials Dust extraction specifically designed to meet the needs of the professional Integrated quick release mitre stops Sliding left hand mitre fence Compact internal rail design for huge cutting capacity in transportable format
Includes: 36 tooth saw blade, Rip Fence, Blade Spanner
4.0
1169
$
DWS780-XE
184MM 24T BLADE VALUED AT $19 DT1214-QZ
POWERFUL 1350W MOTOR
36T FINISHING BLADE
CUTTAWAY INNER GUARD IMPROVED VISIBILITY
+ 21
METALWORKING DEALS
E E R F
$
RRP
89
589
$ RRP
EX GST $535.45
EX GST $80.91
4.0
DEWALT 10.8-18V OTH O T E U L B R X SPEAKER * N O I T P VIA REDEM ®
800W 100MM ANGLE GRINDER
BONUS
DWE4001-XE Small girth allows comfortable gripping resulting in superior ergonomics The low profile gear case allows access in confined areas Abrasion protected motor for increased durability Fully leaded stator windings for increased motor durability Pop off brushes protect the armature from damage at the end of brush Top positioned spindle lock allows maximum depth of cut Keyless ‘One Touch’ Guard Includes: Keyless Protective guard Multi-position side handle Inner and outer disc flange Hex Key
RRP
18V XR HIGH TORQUE WRENCH 4.0AH KIT DCF889M2-XE Powerful fan cooled motor provides 540Nm of torque and 2300 impacts per minute All metal gearing for durability Aluminium front housing disperses heat and increases motor life 1/2” (12.7mm) square socket drive Bright white LED light Intelligent trigger protects battery and tool Standard Equipment 2 x 4.0Ah XR Li-Ion battery packs with state of charge indicator Multi-voltage XR charger Heavy duty kitbox
339
D25601K-XE RRP $809
D25722K-XE RRP $999
4” 800W GRINDER VALUED AT $89 DWE4001-XE
+
809
$ RRP
EX GST $308.18
BONUS
D25902K-XE RRP $999
+
$
D25961K-XE RRP $1159
D25980-XE RRP $2319
9 PIECE IMPACT SOCKET SET VALUED AT $129 DT7507-QZ
EX GST $735.45
BONUS
125MM SLIDE SWITCH SMALL ANGLE GRINDER VALUED AT $129 DWE4151-XE
+
355MM ABRASIVE CHOP SAW
2200W TUNGSTEN CARBIDE 355MM CHOPSAW
D28710-XE
DW872-XE
Quick release clamp for fast work piece clamping High power abrasion protected motor delivers high overload capabilities for greater durability Spindle lock for quick & easy wheel change Adjustable spark guard allows user to control the direction of sparks Ergonomic handle design reduces fatigue
Burr-free cuts at constant cutting depth High power 2200 Watt motor Electronic soft start for metal cutting Robust cool-running 355mm, 70 tooth tungsten carbide tipped blade 25.4mm arbor fitment Large tool-free pivoting fence for parallel and mitre cuts up to 45° Vertical clamping system for safety Max Cut at 90° (Square profile) 100x100mm
D25414KT-XE RRP $649 *Only at selected participating DEWALT stockists from 1/4/15 – 30/6/15 or while stocks last. GO TO WWW.GUARANTEEDTOUGH.COM.AU
22
23
DW331K-XE RRP $299
DW734-XE RRP $929
D26500K-XE RRP $349
FREE
DEWALT 4 PIECE CHISEL SET WITH SELECTED WOODWORKING TOOLS* *Only at selected participating DEWALT stockists from 1/4/15 – 30/6/15 or while stocks last.
DEWALT 82 Taryn Drive, Epping, Victoria 3076
Your DEWALT Dealer:
Telephone: 1800 338 002 Fax: 1800 080 898
The yellow and black colour scheme is used on DEWALT Power Tools and Accessories as a trademark. DEWALT reserves the right to change any deal or price at any time without notice. Pricing includes GST unless otherwise stated. Onsite Offers promotion runs from 1/4/15 – 30/6/15. Any product highlighted as ‘Coming Soon’ will be available after July 2015. Deals available while stocks last and only at participating stores.
www.DEWALT.com
SMITH
Be the first to see product news and special offers from DEWALT®... Register at MYDEWALT to be sent onsite offers by email. Simply go to www.DEWALT.com/MYDEWALT
MY