Outdoor Urban ligthing
Contents Candela Candela LED Rama Rama Garden Rama LED Vía Láctea Pérgola Vía Láctea
SANTACOLE.COM / Urbana Lightning
Candela Gonzalo Milรก, 2009
THE CANDELA STREETLAMP IS CREATED WITH THE IDEA OF ADDING AN URBAN STREET LAMP TO OUR CATALOGUE TO LIGHT UP BIG ROADS AND AVENUES, WHICH COMPLEMENTS AND COEXISTS WITH THE RAMA STREETLAMP
4 /1 1
ร SANTACOLE.COM / Outdoor / Lighting / Streetlamps / Candela
Life cycle of the product study: design for dismantling
Adjustment of the lamp Possibility of adjusting the position of the lamp to modify the emission of light · Position -1: Asymmetric type optics · Position 0: Road optics · Position +1: Type II optics
For lighting of big roads, heights of 8, 10 and 12 m · Flexible system (allows 2 luminaires to be positioned at the same or a different height) · Arms of different length (75 and 150 cm), to help to adapt it to any space · Optionally incorporates a 3 m arm with brace
Double IP protection · IP 65 luminaire · IP 66 Optical unit · Pressure regulator to avoid condensation on the luminaire and on the optical unit
Easy maintenance · Easy replacement of the lamp and of the units · Convenient opening without tools · Safety lock system
Plà de Domeny, Girona (Spain)
THE ARM OF THE LUMINAIRE IS PRESENTED IN TWO SIZES (75 AND 150 CM) WITH THE AIM OF ADAPTING THE DISTANCE BETWEEN THE LIGHT SOURCE AND THE COLUMN IN ACCORDANCE WITH THE TYPE OF ROAD TO BE LIGHT AND THE PRESENCE OF TREES OVERHEAD 5 /1 1
ÊSANTACOLE.COM / Outdoor / Lighting / Streetlamps / Candela
Candela streetlamp
Materials and finishes
Urban street lamp to light up big roads with basic and tested shapes, designed so that from the road it is seen as a homogeneous element integrated in the urban landscape. Its shape, designed for its function, contains the optical and electric units in an orderly manner, prevents light pollution and its easy handling aids its maintenance. It is manufactured in aluminium injection with a painted finish, recycled and recyclable material. The Candela street lamp coexists on the same column but at different heights with the Rama street light.
· Body The whole unit is manufactured in recycled aluminium with painted finish. Body, lid and latch in aluminium injection finished with grey powder paint (RAL 9007). Reflector in drawn aluminium and diffuser in toughened glass. · Arm The luminaire arm is presented in two sizes (75 and 150 cm) with the aim of adapting the distance between the light source and the column in accordance with the type of road to be lit up and the presence of trees overhead. On being aluminium extrusion, the arm can be adapted to any length between both measurements, or extend to 3 m, the latter incorporating a reinforcing brace.
The CANDELA luminaire consists of three parts: a clamp which adapts to columns with a circular cross section, an arm with a rectangular cross section of different lengths, and the oval luminaire.
The arm incorporates an aluminium injection clamp at one of its ends · Columns Columns with a height of 8.20, 10.20 or 12.20 m, with two sections of circular cross-section tube, the lower part Ø 168 mm and the upper part Ø 127 mm. The columns are manufactured in hot galvanized steel and painted finish for 1 or 2 luminaires at the same or a different height. The 8.20 and 10.20 m columns are also manufactured in extruded aluminium.
Luminaire The CANDELA street lamp incorporates an optical body for optimized street lighting for VSAP and HM lamps. It accepts lamps up to 400 W with a luminaire efficiency of over 75%. · Optical unit Reflector in high purity drawn anodized aluminium. Diffuser in toughened transparent glass with a thickness of 5 mm which incorporates a mousse sealing in EPDM. Possibility of horizontal adjustment of the position of the lamp which allows the light distribution to be modified: · Position -1: Asymmetric type optics
· Position 0: Road optics · Position +1: Type II optics · Electric unit The gear-holding plate is easy to extract. Units prepared for VSAP and HM lamps. To improve the energy efficiency of the luminaire, optionally it can incorporate dual-level adjustable units.
759
101
860
282
· Fastening to column System formed by a clamp in two injected aluminium components joined together by stainless steel screws.
Lamp · 150 W / 250 W / 400 W HIT-CE Lamp-holder E40 Power of the system 167 W / 275.5 W / 430 W Luminaire efficiency >75% Upper flux fraction 0.0%
Power supply 230 V - 50 Hz Alimentación 230 V - 50 Hz · Degrees of protection Pressure regulator to avoid condensation in the luminaire and in the optical unit. IP 65 luminaire IP 66 optical unit
· 150 W / 250 W / 400 W HST-MF Lamp-holder E40 Power of the system 170 W / 273.5 W / 434 W Luminaire efficiency >75% Upper flux fraction 0.0%
· IK 09 · Electrical class I (Class II consult) · EC marking
Semiplanos C Ángulos Gamma
180°
120°
Ángulos Gamma
180°
120°
270.0 180.0
80
105°
90°
80
75°
160
60°
105°
105°
90°
90°
75°
75°
60°
60°
100
100
200
0°
180
0
45° 400
cd/klm
400 15°
60°
45°
320
30°
90
75°
300
45°
90.0
90°
240
45°
0.0
105°
15°
30°
cd/klm
500 30°
15°
0°
15°
270
30°
6 /1 1
SANTACOLE.COM / Outdoor / Lighting / Streetlamps / Candela
Semiplanos C Ángulos Gamma
180°
120°
Ángulos Gamma
180°
120°
270.0 180.0
90
105°
90°
90
75°
180
60°
105°
105°
90°
90°
75°
75°
60°
60°
90
90
90
75°
180
60°
180
270
45°
90.0
90°
270
45°
0.0
105°
45°
0
45°
360
360
270 cd/klm
450 30°
15°
Ángulos Gamma
0°
15°
30°
180°
30°
120°
60
105°
90°
60
75°
120
60°
15°
Ángulos Gamma
105°
105°
90°
90°
75°
75°
60°
60°
30°
120°
70
105°
90°
70
75°
140
45°
60°
45°
45°
240
280
cd/klm
300 0°
15°
210
45°
15°
0°
180°
180
30°
cd/klm
450
15°
30°
cd/klm
350 30°
15°
0°
15°
30°
7 /1 1
SANTACOLE.COM / Outdoor / Lighting / Streetlamps / Candela
Models · For lighting of big avenues, heights of 8, 10 and 12 m. · Flexible system, allows 2 luminaires to be placed at the same or a different height. · The clamp of the unit is adjusted to the diameter of the column of the Rama family of street lamps (127/129 cm), offering a lighting system at several heights which allows all kinds of urban projects to be tackled with an element which combines design and function.
1
8,20 m
7
8,20 m
8
8,20 m
· 2 sections · 1 medium-arm luminaire
2
· 2 sections · 2 medium-arm luminaires at same height
8,20 m
· 2 sections · 1 long-arm luminaire
3
· 2 sections · 2 long-arm luminaires at same height
10,20 m
10,20 m
9
· 2 sections · 2 medium-arm luminaires at different height
4
10,20 m
· 2 sections · 2 medium-arm luminaires at same height
10,20 m
10
· 2 sections · 2 long-arm luminaires at different height
5
12,20 m
· 2 sections · 2 long-arm luminaires at same height
12,20 m
11
· 2 sections · 1 medium-arm luminaire
(8,20 m; 10,20 m)
6
(12,20 m)
· 2 sections · 2 medium-arm luminaires at same height
12,20 m
12,20 m
12
· 2 sections · 1 long-arm luminaire
· 2 sections · 2 long-arm luminaires at same height
5
6 12,00 m
4
3
10,00 m
1
2 8,00 m
234
331
174
391
234
28
174
11
12 12,00 m
9
10 10,00 m
7
8 8,00 m
451
331
451
331
451
28
331
8 /1 1
ÊSANTACOLE.COM / Outdoor / Lighting / Streetlamps / Candela
Maintenance
Installation
Weights
The change of lamp and the replacement of the units are carried out without the need for tools, in a fast and simple manner. The opening of the body is carried out with a double-effect latch placed on the front part of the luminaire, and the cover stays open thanks to a gas piston.
The element is delivered dismantled in four parts: the column, the luminaire, the arm with the front clamp and, finally, the rear clamp with the screws. The column is fixed by means of a concrete bucket installed in situ and anchor bolts, 20/30 cm below the level of the finished paving. The foundations must foresee the groove for the electric connection. The template and the anchor bolts are delivered with the column.
· 1 luminaire with medium arm and clamp 22,5 Kg. · Steel columns 140 Kg (8,20 m), 170,5 Kg (10,20 m) y 204 Kg (12,20 m)
1 Convenient, tool-free opening
2 Cover retention
3 Inner assembly
4 Connector latch release
5 Lamp disconnection
6 Optical compartment opening
7 Lamp replacement
8 Lamp housing
9 Lamp adjustment
9 /1 1
ÊSANTACOLE.COM / Outdoor / Lighting / Streetlamps / Candela
Life cycle of the product, design for dismantling · The candela street lamp has been developed improving environmental and innovation aspects throughout the product’s design, manufacturing and marketing process. · The main aspects considered in the technical design of this product were: aid the maintenance as much as possible, be able to replace its components quickly
and simply and the recovery and reuse of the product’s materials and components at the end of its working life. It is therefore a design conceived to optimize the production of all its components, and their subsequent assembly and dismantling. · The material used, the geometry of the parts, the surface
finish, the grouping of its components and the assembly techniques limit the quantity of the element’s production processes. A series of aspects have been considered which have allowed a manufacture adapted to environmental sustainability criteria:
Use of a modular design
Design to aid assembly and dismantling
Use of standard components
Three basic parts: housing, arm + clamp and optical unit. Combining different parts, we can generate a family of products (single luminaire or double luminaire with different arm lengths).
Use of mechanical joints, minimization of the variety of screws. No use of adhesives (the joint and the glass are assembled by pressure). All the electric components are assembled on the base, to aid the assembly and subsequent maintenance.
All the electric components are standard and easily replaceable.
Design to aid the manufacture and recycling of the parts The aluminium injection used for three of its basic components: lid, base and clamp, allows a reduction in thicknesses (less quantity of material), very precise tolerances, smooth surfaces and high resistance to the elements. The aluminium extrusion for the production of the arms which hold the luminaire, means there can be different arm lengths using the same production process. The aluminium allows an easy and economical reuse.
Minimization of the quantity of components We obtain the maximum functionality with the minimum quantity of pieces.
Packing Packing made from “Bico” cardboard (70% recycled material and 100% recyclable). The packing has been conceived to minimize the transport costs as much as possible, generating a minimum volume. We can serve the different models offered by the product using only three types of packing.
Light source Replacement components with easy maintenance. Easy adaptation of the luminaire to LED technology, replacing just the cover of the luminaire with a lower one.
THE CANDELA STREET LAMP HAS BEEN DEVELOPED IMPROVING ENVIRONMENTAL AND INNOVATION ASPECTS THROUGHOUT THE PRODUCT’S DESIGN, MANUFACTURING AND MARKETING PROCE
1 0 /1 1
ÊSANTACOLE.COM / Outdoor / Lighting / Streetlamps / Candela
Coslada, Madrid (Spain) 1 1 /1 1
SANTACOLE.COM / Outdoor / Lighting / Streetlamps / Candela
Candela LED Gonzalo Milรก, 2012
LONG WORKING LIFE, OVER 50,000 HOURS, TRIPLING THE AVERAGE WORKING LIFE OF THE MAJORITY OF THE PRESENT-DAY DISCHARGE LAMPS. MOREOVER, DOES NOT REQUIRE MAINTENANCE
1 2 /1 7
SANTACOLE.COM / Outdoor / Lightning / Streetlamps / Candela LED
Candela LED streetlamp
Materials and finishes
Urban street lamp to light up big roads with basic and tested shapes, designed so that from the road it is seen as a homogeneous element integrated in the urban landscape. Its shape, designed for its function, contains the optical and electric units in an orderly manner, prevents light pollution and its easy handling aids its maintenance. It is manufactured in aluminium injection with a painted finish, recycled and recyclable material. The Candela LED street lamp is composed of three pieces: a clamp which is adapted to columns with a circular cross-section, an arm with a rectangular cross-section of different lengths, and an oval-shaped luminaire.
· Body The whole unit is manufactured in recycled aluminium with painted finish. Body, lid and latch in aluminium injection finished with grey powder paint (RAL 9007). Internal dissipator in aluminium extrusion black anodized finish and diffuser in toughened glass. · Arm The luminaire arm is presented in two sizes (75 and 150 cm) with the aim of adapting the distance between the light source and the column in accordance with the type of road to be lit up and the presence of trees overhead.
On being aluminium extrusion, the arm can be adapted to any length between both measurements, or extend to 3 m, the latter incorporating a reinforcing brace. The arm incorporates an aluminium injection clamp at one of its ends. · Columns Columns with a height of 8.20 or 10.20, with two sections of circular cross-section tube, the lower part Ø 168 mm and the upper part Ø 127 mm. The columns are manufactured in hot galvanized steel and painted finish for 1 or 2 luminaires at the same or a different height. The 8.20 and 10.20 m columns are also manufactured in extruded aluminium.
Luminaire · Optical unit Set of PC LEV 1700 optical lenses · Electronic equipment Offers the possibility of powering the lamp from 350 mA to 500 mA. Adjustable 1-10V or Dali power sources can be supplied as an option.
· Fastening to column Fastening of the body with aluminium half-clamp using stainless steel screws. ·Luminaire installation The luminarie is delivered assembled. The rear clamp with the screws is delivered apart with the rest of the element.
Lamp The Candela LED incorporates a LED module which allows the following options: · 140W - 96 LED (500 mA -12064 lm - 3950k ) · 105W - 72 LED (500 mA – 9048 lm – 3950 k) Luminaire efficiency >90%
Upper flux fraction 0,0% · Power suply 230 V - 50 Hz · Degree of protection IP 66 · Electrical Class I · EC Marking
101
759
180°
120°
250
105°
105°
90°
282
Angle Gamma
100
860
90°
250
75°
75°
90 500
60°
60°
750
45°
45°
180
0
1000 Semiplans C
30°
15°
0°
270.0
cd/klm
1250 15°
30°
90.0 270
0.0
THE INCORPORATION OF LED TECHNOLOGY MANAGES TO REDUCE THE THICKNESS OF THE LUMINAIRE AND FAVOURS ITS INTEGRATION INTO THE URBAN LANDSCAPE
1 3 /1 7
SANTACOLE.COM / Outdoor / Lightning / Streetlamps / Candela LED
THE CANDELA STREETLAMP HAS BEEN DEVELOPED IMPROVING ENVIRONMENTAL AND INNOVATION ASPECTS THROUGHOUT THE PRODUCT’S DESIGN, MANUFACTURING AND MARKETING PROCESS 1 4 /1 7
SANTACOLE.COM / Outdoor / Lightning / Streetlamps / Candela LED
Models For lighting of big avenues, heights of 8 and 10 m. · Flexible system, allows 2 luminaires to be placed at the same or a different height. · The clamp of the unit is adjusted to the diameter of the column of the Rama family of street lamps (127/129 cm), offering a lighting system at several heights which allows all kinds of urban projects to be tackled with an element which combines design and function.
1
6
8,20 m 2
· 2 sections · 1 medium-arm luminaire
7
8,20 m · 2 sections · 1 long-arm luminaire
3
(8 m)
8
8,20 m
10,20 m
9
8,20 m
· 2 sections · 1 medium-arm luminaire
10,20 m · 2 sections · 2 medium-arm luminaires at different height
10
10,20 m
10,20 m · 2 sections · 2 long-arm luminaires at same height
· 2 sections · 2 long-arm luminaires at same height
5
· 2 sections · 1 long-arm luminaire
· 2 sections · 2 medium-arm luminaires at same height
· 2 sections · 2 medium-arm luminaires at same height
4
10,20 m
10,20 m · 2 sections · 2 long-arm luminaires at different height
(10 m)
1
2
3
10,00 m
4
8,00 m
240
5
6
320
470
7
8
28
170
9
10 10,00 m
8,00 m
240
320
470
320
395
28
170
1 5 /1 7
SANTACOLE.COM / Outdoor / Lightning / Streetlamps / Candela LED
Maintenance
Installation
Weights
This luminaire does not require maintenance.
The element is delivered dismantled in four parts: the column, the luminaire, the arm with the front clamp and, finally, the rear clamp with the screws. The column is fixed by means of a concrete bucket installed in situ and anchor bolts, 20/30 cm below the level of the finished paving. The foundations must foresee the groove for the electric connection. The template and the anchor bolts are delivered with the column.
· Luminaire 14,5 Kg. · Stainless steel columns 140 Kg (8,20 m), 170,5 Kg (10,20 m)
Life cycle of the product, design for dismantling The candela street lamp has been developed improving environmental and innovation aspects throughout the product’s design, manufacturing and marketing process. · The main aspects considered in the technical design of this product were: aid the maintenance as much and simply and the recovery and reuse of the product’s mate-
rials and components at the end of its working life. It is therefore a design conceived to optimize the production of all its components, and their subsequent assembly and dismantling. · The material used, the geometry of the parts, the surface as possible, be able to replace its components quickly
finish, the grouping of its components and the assembly techniques limit the quantity of the element’s production processes. A series of aspects have been considered which have allowed a manufacture adapted to environmental sustainability criteria:
Use of a modular design
Design to aid assembly and dismantling
Use of standard components
Three basic parts: housing, arm + clamp and optical unit. Combining different parts, we can generate a family of products (single luminaire or double luminaire with different arm lengths).
Use of mechanical joints, minimization of the variety of screws. No use of adhesives (the joint and the glass are assembled by pressure). All the electric components are assembled on the base, to aid the assembly and subsequent maintenance.
All the electric components are standard and easily replaceable.
Design to aid the manufacture and recycling of the parts Aluminium injection used for three of its basic components: lid, base and clamp. Allows a reduction in thicknesses (less quantity of material), very precise tolerances, smooth surfaces and high resistance to the elements. Aluminium extrusion for the production of the arms which hold the luminaire. Means there can be different arm lengths using the same production process. The aluminium allows an easy and economical reuse.
Minimization of the quantity of components We obtain the maximum functionality with the minimum quantity of pieces.
Packing Packing made from “Bico” cardboard (70% recycled material and 100% recyclable). The packing has been conceived to minimize the transport costs as much as possible, generating a minimum volume. We can serve the different models offered by the product using only three types of packing
1 6 /1 7
SANTACOLE.COM / Outdoor / Lightning / Streetlamps / Candela LED
THE COMBINATION OF RAMA AND CANDELA STREET LAMPS OFFERS A LIGHTING SYSTEM AT VARIOUS HEIGHTS WHICH ALLOWS ALL TYPES OF URBAN PROJECTS TO BE COVERED 1 7 /1 7
SANTACOLE.COM / Outdoor / Lightning / Streetlamps / Candela LED
Rama Gonzalo Milรก, 2000
URBAN LUMINAIRE WHICH OFFERS LOW CONSUMPTION AND THE INSTALLATION OF AN OPTIONAL NUMBER OF LUMINAIRES PLACED AT DIFFERENT HEIGHTS AND POSITIONS
18/23
SANTACOLE.COM / Outdoor / Lighting / Streetlamps / Rama
1
Polyamide or aluminium injection
2
Lighting at different heights
3
Colours Barcelona (Spain)
SANTA & COLE APPLIES THE MOST DEMANDING SUSTAINABILITY CRITERIA FOR THE LIGHTING OF PUBLIC SPACES: RATIONAL ENERGY USE, EFFICIENCY AND ENERGY SAVING, THE USE OF LOW-CONSUMPTION HIGH-EFFICIENCY LAMPS AVOIDING SKY GLOW AND LIGHT POLLUTION
19/23
SANTACOLE.COM / Outdoor / Lighting / Streetlamps / Rama
Rama Streetlamp
Materials and finishes
This street lamp is a tree of light created with a threefold objective: for ground-projected lighting, reduced consumption and an optional number of luminaires at different heights and in different positions.
· Body Luminaire and fastening clamp in aluminium injection or luminaire and fastening clamp in grey or brown polyamide injection. Aluminium reflector and diffuser in toughened glass. · Columns Tubular column with circular cross section of different diameters and heights (depending on reference). Allows several luminaires to be fixed (1, 2 or 5). 4.70m / 185.1”or 6.20m / 244.1”high and 127 mm / 5” diameter grey painted columns in hot-galvanized steel or anodized aluminium, for 1 or 2 luminaires at the same or different heights.
Luminaire for outdoor lighting designed to house high pressure sodium vapour, metal halide or compact fluorescent luminaires. Dual level units for control line can be included as an option. The Rama luminaire is presented in two models which are distinguished by the change of material in their manufacture: polyamide or injected aluminium.
8m / 315” high double-section grey painted columns of hot galvanized steel with a Ø of 152 mm / 6” in the lower part and a Ø of 127 mm / 5” in the upper part, for 1 or 2 luminaires at the same or different heights, or for 5 luminaires at different heights. 6.20m / 244,1” or 8.20m / 322.9” high double-section columns with a Ø of 152 mm / 6”in hot-galvanized steel and painted tube in the lower part and a Ø of 129 mm / 5,1” in stainless steel AISI 304 polished finish tube in the upper part, for 1 or 2 luminaires at the same or different heights, or for 5 luminaires at different heights (for the 8.20m / 323” column).
Luminaire · Fastening to column Fastening of the body with aluminium or polyamide halfclamp using stainless steel screws. The gear-holding plate is easy to extract. Units prepared for VSAP and HM lamps. To improve the energy efficiency of the luminaire, optionally it can incorporate dual-level adjustable units.
· Installation of the luminaire The luminaire is delivered assembled. It is opened in the upper part with a ½ turn latch. The lid is attached to the body with a gas piston which aids the maintenance. It incorporates mousse sealing in EPDM. The assembly instructions are enclosed with the street lamp. 2 0
Polyamide injection
Aluminium injection
Polyamide injection Colours: RAL - 8014 (brown) / RAL - 9007 (dark grey) / RAL - 5023 (blue)
Aluminium injection Colours: RAL - 9007 (dark grey) / RAL - 7024 (grafita grey)
1160 mm / 45.7 “ 1160
98 mm / 3,8 98 “
98 mm / 3,8 98 “ 200 mm / 7,9 200“
76
200 mm / 7,9 200“
1160 mm / 45.7 “ 1160 1087
20/23
SANTACOLE.COM / Outdoor / Lighting / Streetlamps / Rama
Lamp · 70W / 100W / 150W HIT-CE Lamp-holder E27 / E40 / E40 – G12 (USA) Power of the system 84W / 115W / 167W Luminaire efficiency 77.64% Upper flux fraction 0.0%
· 70W/150W HIT-DE-CE Lamp-holder Rx7s Power of the system 84W / 167W Luminaire efficiency 77.42% Upper flux fraction 0.0%
· 57W/70W TC-QEL Lamp-holder GX24q - 5 / 6 Power of the system 63W / 77W Luminaire efficiency 58.13% Upper flux fraction 0.0%
· 70W / 100W / 150W HST-MF Lamp-holder E27 / E40 / E40 – E26 / E39 (USA) Power of the system 83W / 115W / 170W Luminaire efficiency 71.36% Upper flux fraction 0.0%
· 70W/150 W HST-DE Lamp-holder Rx7s Power of the system 83W / 170W Luminaire efficiency 71.22% Upper flux fraction 0.0%
· Power supply 230V- 50 Hz (EC) – 120/277 V - 50/60 Hz (USA) · Degree of protection IP-66 · Electrical class I (Class II consult) · EC Marking - Certificate UL (Aluminium model)
Maximum 384.70 cd/Klm Position C=0.00 G=60.00 Productivity nl = 71.22% FHS rate = 0.02%
21/23
SANTACOLE.COM / Outdoor / Lighting / Streetlamps / Rama
2 luminaires at diferent height
1 luminaire
2 luminaires at same height
Maintenance
Installation
Weights
Usual replacements and maintenance for the units.
The column is fixed by means of a concrete bucket installed in situ and anchor bolts, 20 cm / 7,9“ below the paving. The foundations must foresee the groove for the electric connection. The unit is delivered dismantled. The assembly instructions are enclosed with the street lamp. The template and the anchor bolts are delivered with the column. Optional AISI 304 stainless steel wall support.
· 1 luminaire / 2 luminaire (Polyamide) 8 Kg / 17,7 lb. 13,5 Kg / 29,8 lb · 1 luminaire / 2 luminaire (Aluminium) 14 Kg / 30,9 lb. 24 Kg / 52,9 lb
Rama Aluminium (1) and Rama Polyamide (2)
Rama Aluminium interior
(2)
(1)
Clamping piston
Upper closing
Sealing joint
22/23
SANTACOLE.COM / Outdoor / Lighting / Streetlamps / Rama
Models · Luminaire Rama polyamide · Luminaire Rama aluminium injection
1
4,70 m / 185,1“
5
4,70 m / 185,1“
6
6,20 m / 244,1“
7
6,20 m / 244,1“
8
· 1 section · 1 luminaire
65 cm 25,6”
20 cm / 7,9”
(8,20 m /323“)
4
6,20 m / 244,1“
10
6,20 m / 244,1“
11
6,20 m / 244,1“
12
8,20 m / 323“
· 2 sections · 2 luminaires at same height
· 2 sections · 2 luminaires at same height
· 1 section · 2 luminaire at same height
8,20 m / 323“ · 2 sections · 1 luminaire
· 2 sections · 1 luminaire
· 1 section · 1 luminaire
90 cm 35,5”
(6,20 m /244,1“)
8,20 m / 323“
· 2 sections · 2 luminaires at different height
· 2 sections · 2 luminaires at different height
8,20 m / 323“
· 2 sections · 5 luminaires
8,00 m / 315”
3
4
5
6
7
8 6,00 m / 236,2”
1
2 4,50 m /177,2”
216 cm / 85,1”
116 cm / 45,7”
216 cm / 85,1”
216 cm / 85,1”
116 cm / 45,7”
216 cm / 85,1”
216 cm / 85,1”
20 cm / 7,9”
116 cm / 45,7”
9
10
11
12 8,00 m / 315”
6,00 m / 236,2”
4,50 m /177,2”
116 cm / 45,7”
216 cm / 85,1”
216 cm / 85,1”
201 cm / 79,2”
20 cm / 7,9”
(4,70 m /185,1“)
3
80 cm 31,5”
9
· 2 sections · 2 luminaires at different height
· 1 section · 2 luminaire
70 cm / 27,6”
20 cm / 7,9” 70 cm / 27,6”
60 cm / 23,7”
20 cm / 7,9”
2
6,20 m / 244,1“
72º
23/23
SANTACOLE.COM / Outdoor / Lighting / Streetlamps / Rama
Rama Garden Gonzalo Milรก, 2011
THE RAMA GARDEN STREET LAMP IS DESIGNED TO LIGHT UP LANDSCAPED SPACES AT LOW LEVELS. REPLACES THE CLAMP FASTENING TO THE COLUMN WITH A DIRECT INTEGRATION AT THE END OF THE COLUMN, GENERATING A CONTINUOUS ELEMENT WITHOUT JOINTS IN TWO VERSIONS, SINGLE OR DOUBLE
24/27
SANTACOLE.COM / Outdoor / Lighting / Streetlamps / Rama Garden
1
Use of LED Technology: energy saving
2
Does not require maintenance
3
Lighting at lower levels
LONG WORKING LIFE, OVER 50,000 HOURS, TRIPLING THE AVERAGE WORKING LIFE OF THE MAJORITY OF THE PRESENT-DAY DISCHARGE LAMPS
25/27
SANTACOLE.COM / Outdoor / Lighting / Streetlamps / Rama Garden
Rama Garden Streetlamp
Materials and finishes
The RAMA GARDEN is the adaptation of the Rama street light to LED technology. Over 50,000 hours of life with high luminous efficacy, linear regulation of flow and minimum maintenance. The slimmer aluminium extrusion body replaces the clamp fastening to the column with a direct integration at the end of the column.
· Body The body of the luminaire has a rectangular cross-section 119x65mm in recycled aluminium extrusion, anodized finish, and the end covers are in aluminium injection with grey painted finish. Internal dissipator in aluminium extrusion black anodized finish. Methacrylate diffuser. · Columns Columns with a height of 3.70 and 5.20 m, circular cross-section tube of Ø 114mm in aluminium extrusion, anodized finish, for 1 or 2 luminaires at the same height.
The body of the luminaire, whether single or double, is made in a single piece, without intermediate joints, and is coupled to the column at a right angle, a pure shape even simpler than its predecessor. The body of the luminaire is in aluminium extrusion, recycled and recyclable material, anodized finish.
Luminaire · Optical unit Set of PC LEV 1700 optical lenses. · Electronic equipment Offers the possibility of powering the lamp from 350 mA to 500 mA. Adjustable 1-10V or Dali power sources can be supplied as an option. · Fastening to column Fastening of the body to the column with three stainless steel screws.
· Installation of the luminaire The luminaire is delivered assembled. It is not necessary to open the unit to install the luminaire. A connector housed in the lower part of the body allows easy installation. Santa & Cole will maintain the guarantee provided that the body of the luminaire is not opened. The assembly instructions are enclosed with the street lamp.
Lamp The Rama Garden incorporates a LED module which allows the following options:
Luminaire efficiency >90% Upper flux fraction 0.0%
· 25W - 24 LED (350 mA) Power of the system 27W
· Power supply 230 V - 50 Hz · Degree of protection IP grupo óptico 66 · Electrical class I (Clase II consult) · EC marking
· 35W - 24 LED (500 mA) Power of the system 39W
Maximum value: 362,48 cd/Klm Position: C=345.00 G=50.00
Single luminaire
190
65
900
Double luminaire
190
65
1610
26/27
SANTACOLE.COM / Outdoor / Lighting / Streetlamps / Rama Garden
Maintenance
Installation
Weights
This luminaire does not require maintenance
The column is fixed by means of a concrete bucket installed in situ and anchor bolts, 20 cm below the paving. The foundations must foresee the groove for the electric connection. The unit is delivered dismantled. The assembly instructions are enclosed with the street lamp. The template and the anchor bolts are delivered with the column.
· Single luminaire 5.2 Kg · Double luminaire 10.4 Kg · Columns 37.0 / 5.20 m 16 Kg / 21 Kg
Images from the inside of the luminaire
Models
3,70 m
1
· 1 section · 1 single luminaire 20
3,70 m
60
2
· 1 section · 1 double luminaire
3
65
5,20 m
· 1 section · 1 single luminaire
5,20 m
· 1 section · 1 double luminaire
3
4 5,00 m
1
2 3,50 m
90
161
90
161
19
4
27/27
SANTACOLE.COM / Outdoor / Lighting / Streetlamps / Rama Garden
Rama LED Gonzalo Milรก and Santa & Cole team, 2011 THE RAMA LED STREETLAMP PROMOTES ENERGY SAVING AND MINIMIZES LIGHT POLLUTION. ITS HIGH EFFICIENCY IS ABOVE THAT OF CONVENTIONAL LAMPS. ACCEPTS THE POSSIBILITY OF ADJUSTING ITS INTENSITY
28/33
SANTACOLE.COM / Outdoor / Lighting / Streetlamps / Rama LED
1
Use of LED Technology: energy saving
2
Does not require maintenance
3
Lighting at different levels
29/33
SANTACOLE.COM / Outdoor / Lighting / Streetlamps / Rama LED
Rama LED Streetlamp
Materials and finishes
The intensity of the light emitted can be adjusted according to the needs of the urban environment, thus allowing a notable energy saving.
· Body Body in recycled aluminium extrusion, anodized finish, with clamp and injection cover in aluminium injection with grey painted finish. Internal dissipator in aluminium extrusion black anodized finish. Methacrylate diffuser.
Technical upgrade and energy improvement of the Rama luminaire for outdoor lighting, which allows energy consumption to be optimized by incorporating LED technology which improves the luminous efficacy. The maintenance tasks are likewise reduced.
· Columns Column with circular cross section of different diameters and heights (depending on reference). Allows several luminaires to be fixed (1, 2 or 5). 4.70 or 6.20 m high and 127 mm diameter grey painted columns in hot-galvanized steel or anodized aluminium, for 1 or 2 luminaires at the same or different heights.
8m high double-section grey painted columns of hot galvanized steel with a Ø of 152 mm in the lower part and a Ø of 127 mm in the upper part, for 1 or 2 luminaires at the same or different heights, or for 5 luminaires at different heights. 6.20 or 8.20m high double-section columns with a Ø of 152 mm in hot-galvanized steel and painted tube in the lower part and a Ø of 129 mm in stainless steel AISI 304 polished finish tube in the upper part, for 1 or 2 luminaires at the same or different heights, or for 5 luminaires at different heights (for the 8.20 m column).
Luminaire · Optical unit Set of PC LEV 1700 optical lenses. · Electronic equipment Offers the possibility of powering the lamp from 350 mA to 500 mA. Adjustable 1-10V or Dali power sources can be supplied as an option. · Fastening to column Fastening of the body with aluminium half-clamp using stainless steel screws.
· Installation of the luminaire The luminaire is delivered assembled. The rear clamp is delivered separately together with the screws necessary. It is not necessary to open the unit to install the luminaire. A connector housed in the outer part of the body allows easy installation. Santa & Cole will maintain the guarantee provided that the body of the luminaire is not opened. The assembly instructions are enclosed with the street lamp.
Lamp The Rama LED incorporates a LED module which allows the following options:
· 50W - 48 LED (350 mA) Power of the system 54W
· 25W - 24 LED (350 mA) Power of the system 27W
· 70W - 48 LED (500 mA) Power of the system 78W
· 35W - 24 LED (500 mA) Power of the system 39W
Luminaire efficiency >90% Upper flux fraction 0.0%
· Power supply 230V - 50Hz · Degree of protection IP optical unit 66 · Electrical class I (Class II consult) · EC marking
Maximum value: 362,48 cd/Klm Position: C=345.00 G=50.00
30/33
SANTACOLE.COM / Outdoor / Lighting / Streetlamps / Rama LED
Models 1
4,70 m
4
4,70 m
5
6,20 m
20
65
6,20 m
· 1 section · 2 luminaire
80
3
90
(6,20 m)
· 1 section · 2 luminaires at same height
(8,20 m)
6,20 m
· 2 sections · 2 luminaires at different height
6
8,20 m · 2 sections · 5 luminaires
· 1 section · 1 luminaire
6 8,00 m
3
4
5 6,00 m
1
2 4,50 m
19 90
164
90
164
164
20
(4,70 m)
2
70
20 70
60
20
· 1 section · 1 luminaire
72º
31/33
SANTACOLE.COM / Outdoor / Lighting / Streetlamps / Rama LED
Maintenance
Installation
Weights
This luminaire does not require maintenance
The column is fixed by means of a concrete bucket installed in situ and anchor bolts 20 cm below the paving. The foundations must foresee the groove for the electric connection. The unit is delivered dismantled. The assembly instructions are enclosed with the street lamp. The template and the anchor bolts are delivered with the column.
路 Luminaire 9,2 Kg
LONG WORKING LIFE, OVER 50,000 HOURS, TRIPLING THE AVERAGE WORKING LIFE OF THE MAJORITY OF THE PRESENT-DAY DISCHARGE LAMPS. MOREOVER, DOES NOT REQUIRE MAINTENANCE
Images from the inside of the luminaire
32/33
SANTACOLE.COM / Outdoor / Lighting / Streetlamps / Rama LED
33/33
SANTACOLE.COM / Outdoor / Lighting / Streetlamps / Rama LED
Vía Láctea Enric Batlle and Joan Roig, 1990 THE VÍA LÁCTEA STREETLAMP WAS DESIGNED TO DRAW LINES OF LIGHT IN THE SKY
Viladecans, Barcelona (Spain) 34/37
SANTACOLE.COM / Outdoor / Urban Elements / Streetlamps / Vía Láctea
1
Generate light lines
2
Numerous alignments
3
Combinable with the Vía Láctea Pergola
Vía Láctea Versatile street lamp with simple, geometric, lines, conceived to draw lines of light in the sky. Its structure allows numerous alignments and lines of light to be created. Combined
with the Vía Láctea Pergola, they create large shaded areas during the day and lit areas at night. Support and luminaire form a single body. The column,
with a square cross-section in the lower part, becomes forked, forming a 90º angle in the upper part. The luminaire is arranged perpendicular to the support.
Materials and finishes It has a 150 x 100 mm rectangular-base column with control hatch and 100 x 50 mm forked support made in hot-galvanized structural steel painted finishes. It has a rectangular screen (simple for one lamp or double for two lamps), made of the same material.
Maintenance
Weights
Installation
Normal part replacement and maintenance.
· Simple: 103 Kg. · Double: 118 Kg.
The streetlamp is delivered disassembled in two components: the column and the screen with the lamp. Assembly instructions are included with the street lamp. The column is fixed using a concrete cube made on site and anchor bolts, 20 cm below the ground. The foundations should provide a slot for the electrical connection. Anchorage bolts, pattern and moulding come with the column. The column with double shade cannot be installed in isolation; it must be fixed to another luminaire at one of its ends.
35/37
SANTACOLE.COM / Outdoor / Urban Elements / Streetlamps / Vía Láctea
Luminaire
Lamp
The luminaire is a portafluorescentes for 2 58 W tubular lamp. As an option, lights can be delivered for a unique tube of 58W.
· Lamp 58W T26 · IP protection IP-66 · Electrical class I · EC marking
Angle Gamma
180°
40
105°
105°
90°
90°
40
75°
180
0
75°
270
80
60°
90
120°
60°
120
45°
45° 160
cd/klm
200 30°
15°
0°
15°
30°
Semiplans C 90.0
Barcelona (Spain)
0.0 270.0
Models
90
90
22
22
365
365
Vía Láctea Street lamp with one lamp Vía Láctea Street lamp with two lamps
137
137
342
70
171
70
36/37
SANTACOLE.COM / Outdoor / Urban Elements / Streetlamps / Vía Láctea
Sant Cugat del Vallès Barcelona (Spain) 37/37
SANTACOLE.COM / Outdoor / Urban Elements / Streetlamps / Vía Láctea
Vía Láctea Pergola Enric Batlle and Joan Roig, 1990
THIS IS A MODULAR PERGOLA, WITH MANY COMPOSITIONAL POSSIBILITIES, WHICH CREATES LARGE SHADED AREAS DURING THE DAY AND LIT AREAS AT NIGHT WHEN USED TOGETHER WITH THE VÍA LÁCTEA STREETLAMP
Nus de la Trinitat, Barcelona (Spain) 38/41
SANTACOLE.COM / Outdoor / Urban Elements / Pergolas / Vía Láctea
65mts special Pérgola Via Láctea for Santurce city council, País Basco (Spain)
Pergola Vía Láctea Very simple and functional urban element by day and by night. The slatted wooden roof forms shaded areas during the day and combined with the Via Láctea street lamp it
lights up the urban space when night falls. Its modular structure allows different compositions to be created, adaptable to all kinds of spaces.
Materials and finishes Structure Structure made with galvanized steel sections painted with powder paint. Cover Slatted roof made with autoclave treated red pine wooden slats. The Red Pine wood comes from the central area of Sweden. This wood has classification V in the General
Rules for the Classification of Swedish Sawn Red Pine and Fir Timber established by the 1958 Committee for the classification of Timber. This wood is obtained complying with all the legal and environmental regulations of the country of origin, ensuring the sustainability of the woods and avoiding the environmental impact. This wood does not come from primary forests. With the aim of
protecting red pine wood in the face of risk classes 1 to 4 described in standard EN 335-1-92 and EN 335-92, an autoclave treatment is applied.
Maintenance
Weights
Installation
Normal part replacement and maintenance.
· Initial module: 844 Kg · Intermediate module: 725 Kg
The pergola is supplied disassembled in five components: the column, the pergola structure, the wooden grid, the screen and the lamps. The pergola optionally can be delivered without light. Installation is completely mechanical, without welding, and uses stainless steel screws. The column is fixed using concrete cube made in situ and screws with mechanical block, 20 cm below the ground level. The foundation should provide a slot for the electrical connection. The hub cab and anchor screws are delivered with the columns. Assembly instructions are included with the pergola.
All the fastening bolts of the slats are in steel with anti-rust protection.
39/41
SANTACOLE.COM / Outdoor / Urban Elements / Pergolas / Vía Láctea
Luminaire
Lamp
Fluorescent lights for two tube lamps of 58 W. As an option, lights can be delivered for a unique tube of 58 W.
Lamp 58W T26 IP Protection IP-66 Electrical class I CE Marking
Angle Gamma
180°
40
105°
105°
90°
90°
40
75°
180
0
75°
80
60°
90
120°
270
60°
120
45°
45°
Semiplans C
160
90.0 cd/klm
200 30°
15°
0°
15°
30°
0.0 270.0
Models With light
22 365
90
22
370
370
Without light
70
362
362
70
120
480
120
497
EACH MODULE OFFERS A SURFACE AREA OF 18m 2 OF SHADE DURING THE DAY AND LINEAR LIGHTING AT NIGHT, USING FLUORESCENCE AS THE LIGHT SOURCE
40/41
SANTACOLE.COM / Outdoor / Urban Elements / Pergolas / Vía Láctea
Viladecans, Barcelona (Spain)
Mallorca (Spain)
Viladecans, Barcelona (Spain) 41/41
SANTACOLE.COM / Outdoor / Urban Elements / Pergolas / Vía Láctea
MAIN OFFICE Parc de Belloch Ctra. C-251, Km. 5,6 E-08430 La Roca, Barcelona T. +34 938 619 100 General: info@santacole.com Forestry: forestal@santacole.com Books: publicaciones@santacole.com
SPAIN Sales T. +34 902 460 010 ventas@santacole.com After-sales T. +34 902 460 030 postventa@santacole.com
INTERNATIONAL Sales T. +34 938 619 100
internationalsales@santacole.com
After-sales T. +34 938 444 226 aftersales@santacole.com USA Santa & Cole Inc. 2005 Charleston Trace 30075 Roswell, GA, USA usaindoor@santacole.com FRANCE Toulouse Showroom 45 AllÊes Jean Jaurès 31000 Toulouse T. +33 562 877 216
toulouse.france@santacole.com
SANTACOLE.COM